Loading...
1/*
2 * libata-core.c - helper library for ATA
3 *
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
6 * on emails.
7 *
8 * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
9 * Copyright 2003-2004 Jeff Garzik
10 *
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
15 * any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
25 *
26 *
27 * libata documentation is available via 'make {ps|pdf}docs',
28 * as Documentation/DocBook/libata.*
29 *
30 * Hardware documentation available from http://www.t13.org/ and
31 * http://www.sata-io.org/
32 *
33 * Standards documents from:
34 * http://www.t13.org (ATA standards, PCI DMA IDE spec)
35 * http://www.t10.org (SCSI MMC - for ATAPI MMC)
36 * http://www.sata-io.org (SATA)
37 * http://www.compactflash.org (CF)
38 * http://www.qic.org (QIC157 - Tape and DSC)
39 * http://www.ce-ata.org (CE-ATA: not supported)
40 *
41 */
42
43#include <linux/kernel.h>
44#include <linux/module.h>
45#include <linux/pci.h>
46#include <linux/init.h>
47#include <linux/list.h>
48#include <linux/mm.h>
49#include <linux/spinlock.h>
50#include <linux/blkdev.h>
51#include <linux/delay.h>
52#include <linux/timer.h>
53#include <linux/interrupt.h>
54#include <linux/completion.h>
55#include <linux/suspend.h>
56#include <linux/workqueue.h>
57#include <linux/scatterlist.h>
58#include <linux/io.h>
59#include <linux/async.h>
60#include <linux/log2.h>
61#include <linux/slab.h>
62#include <scsi/scsi.h>
63#include <scsi/scsi_cmnd.h>
64#include <scsi/scsi_host.h>
65#include <linux/libata.h>
66#include <asm/byteorder.h>
67#include <linux/cdrom.h>
68#include <linux/ratelimit.h>
69#include <linux/pm_runtime.h>
70
71#include "libata.h"
72#include "libata-transport.h"
73
74/* debounce timing parameters in msecs { interval, duration, timeout } */
75const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 };
76const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 };
77const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 };
78
79const struct ata_port_operations ata_base_port_ops = {
80 .prereset = ata_std_prereset,
81 .postreset = ata_std_postreset,
82 .error_handler = ata_std_error_handler,
83};
84
85const struct ata_port_operations sata_port_ops = {
86 .inherits = &ata_base_port_ops,
87
88 .qc_defer = ata_std_qc_defer,
89 .hardreset = sata_std_hardreset,
90};
91
92static unsigned int ata_dev_init_params(struct ata_device *dev,
93 u16 heads, u16 sectors);
94static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
95static void ata_dev_xfermask(struct ata_device *dev);
96static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
97
98atomic_t ata_print_id = ATOMIC_INIT(0);
99
100struct ata_force_param {
101 const char *name;
102 unsigned int cbl;
103 int spd_limit;
104 unsigned long xfer_mask;
105 unsigned int horkage_on;
106 unsigned int horkage_off;
107 unsigned int lflags;
108};
109
110struct ata_force_ent {
111 int port;
112 int device;
113 struct ata_force_param param;
114};
115
116static struct ata_force_ent *ata_force_tbl;
117static int ata_force_tbl_size;
118
119static char ata_force_param_buf[PAGE_SIZE] __initdata;
120/* param_buf is thrown away after initialization, disallow read */
121module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
122MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
123
124static int atapi_enabled = 1;
125module_param(atapi_enabled, int, 0444);
126MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])");
127
128static int atapi_dmadir = 0;
129module_param(atapi_dmadir, int, 0444);
130MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)");
131
132int atapi_passthru16 = 1;
133module_param(atapi_passthru16, int, 0444);
134MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])");
135
136int libata_fua = 0;
137module_param_named(fua, libata_fua, int, 0444);
138MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)");
139
140static int ata_ignore_hpa;
141module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
142MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)");
143
144static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CFA;
145module_param_named(dma, libata_dma_mask, int, 0444);
146MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)");
147
148static int ata_probe_timeout;
149module_param(ata_probe_timeout, int, 0444);
150MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
151
152int libata_noacpi = 0;
153module_param_named(noacpi, libata_noacpi, int, 0444);
154MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)");
155
156int libata_allow_tpm = 0;
157module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
158MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
159
160static int atapi_an;
161module_param(atapi_an, int, 0444);
162MODULE_PARM_DESC(atapi_an, "Enable ATAPI AN media presence notification (0=0ff [default], 1=on)");
163
164MODULE_AUTHOR("Jeff Garzik");
165MODULE_DESCRIPTION("Library module for ATA devices");
166MODULE_LICENSE("GPL");
167MODULE_VERSION(DRV_VERSION);
168
169
170static bool ata_sstatus_online(u32 sstatus)
171{
172 return (sstatus & 0xf) == 0x3;
173}
174
175/**
176 * ata_link_next - link iteration helper
177 * @link: the previous link, NULL to start
178 * @ap: ATA port containing links to iterate
179 * @mode: iteration mode, one of ATA_LITER_*
180 *
181 * LOCKING:
182 * Host lock or EH context.
183 *
184 * RETURNS:
185 * Pointer to the next link.
186 */
187struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap,
188 enum ata_link_iter_mode mode)
189{
190 BUG_ON(mode != ATA_LITER_EDGE &&
191 mode != ATA_LITER_PMP_FIRST && mode != ATA_LITER_HOST_FIRST);
192
193 /* NULL link indicates start of iteration */
194 if (!link)
195 switch (mode) {
196 case ATA_LITER_EDGE:
197 case ATA_LITER_PMP_FIRST:
198 if (sata_pmp_attached(ap))
199 return ap->pmp_link;
200 /* fall through */
201 case ATA_LITER_HOST_FIRST:
202 return &ap->link;
203 }
204
205 /* we just iterated over the host link, what's next? */
206 if (link == &ap->link)
207 switch (mode) {
208 case ATA_LITER_HOST_FIRST:
209 if (sata_pmp_attached(ap))
210 return ap->pmp_link;
211 /* fall through */
212 case ATA_LITER_PMP_FIRST:
213 if (unlikely(ap->slave_link))
214 return ap->slave_link;
215 /* fall through */
216 case ATA_LITER_EDGE:
217 return NULL;
218 }
219
220 /* slave_link excludes PMP */
221 if (unlikely(link == ap->slave_link))
222 return NULL;
223
224 /* we were over a PMP link */
225 if (++link < ap->pmp_link + ap->nr_pmp_links)
226 return link;
227
228 if (mode == ATA_LITER_PMP_FIRST)
229 return &ap->link;
230
231 return NULL;
232}
233
234/**
235 * ata_dev_next - device iteration helper
236 * @dev: the previous device, NULL to start
237 * @link: ATA link containing devices to iterate
238 * @mode: iteration mode, one of ATA_DITER_*
239 *
240 * LOCKING:
241 * Host lock or EH context.
242 *
243 * RETURNS:
244 * Pointer to the next device.
245 */
246struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link,
247 enum ata_dev_iter_mode mode)
248{
249 BUG_ON(mode != ATA_DITER_ENABLED && mode != ATA_DITER_ENABLED_REVERSE &&
250 mode != ATA_DITER_ALL && mode != ATA_DITER_ALL_REVERSE);
251
252 /* NULL dev indicates start of iteration */
253 if (!dev)
254 switch (mode) {
255 case ATA_DITER_ENABLED:
256 case ATA_DITER_ALL:
257 dev = link->device;
258 goto check;
259 case ATA_DITER_ENABLED_REVERSE:
260 case ATA_DITER_ALL_REVERSE:
261 dev = link->device + ata_link_max_devices(link) - 1;
262 goto check;
263 }
264
265 next:
266 /* move to the next one */
267 switch (mode) {
268 case ATA_DITER_ENABLED:
269 case ATA_DITER_ALL:
270 if (++dev < link->device + ata_link_max_devices(link))
271 goto check;
272 return NULL;
273 case ATA_DITER_ENABLED_REVERSE:
274 case ATA_DITER_ALL_REVERSE:
275 if (--dev >= link->device)
276 goto check;
277 return NULL;
278 }
279
280 check:
281 if ((mode == ATA_DITER_ENABLED || mode == ATA_DITER_ENABLED_REVERSE) &&
282 !ata_dev_enabled(dev))
283 goto next;
284 return dev;
285}
286
287/**
288 * ata_dev_phys_link - find physical link for a device
289 * @dev: ATA device to look up physical link for
290 *
291 * Look up physical link which @dev is attached to. Note that
292 * this is different from @dev->link only when @dev is on slave
293 * link. For all other cases, it's the same as @dev->link.
294 *
295 * LOCKING:
296 * Don't care.
297 *
298 * RETURNS:
299 * Pointer to the found physical link.
300 */
301struct ata_link *ata_dev_phys_link(struct ata_device *dev)
302{
303 struct ata_port *ap = dev->link->ap;
304
305 if (!ap->slave_link)
306 return dev->link;
307 if (!dev->devno)
308 return &ap->link;
309 return ap->slave_link;
310}
311
312/**
313 * ata_force_cbl - force cable type according to libata.force
314 * @ap: ATA port of interest
315 *
316 * Force cable type according to libata.force and whine about it.
317 * The last entry which has matching port number is used, so it
318 * can be specified as part of device force parameters. For
319 * example, both "a:40c,1.00:udma4" and "1.00:40c,udma4" have the
320 * same effect.
321 *
322 * LOCKING:
323 * EH context.
324 */
325void ata_force_cbl(struct ata_port *ap)
326{
327 int i;
328
329 for (i = ata_force_tbl_size - 1; i >= 0; i--) {
330 const struct ata_force_ent *fe = &ata_force_tbl[i];
331
332 if (fe->port != -1 && fe->port != ap->print_id)
333 continue;
334
335 if (fe->param.cbl == ATA_CBL_NONE)
336 continue;
337
338 ap->cbl = fe->param.cbl;
339 ata_port_notice(ap, "FORCE: cable set to %s\n", fe->param.name);
340 return;
341 }
342}
343
344/**
345 * ata_force_link_limits - force link limits according to libata.force
346 * @link: ATA link of interest
347 *
348 * Force link flags and SATA spd limit according to libata.force
349 * and whine about it. When only the port part is specified
350 * (e.g. 1:), the limit applies to all links connected to both
351 * the host link and all fan-out ports connected via PMP. If the
352 * device part is specified as 0 (e.g. 1.00:), it specifies the
353 * first fan-out link not the host link. Device number 15 always
354 * points to the host link whether PMP is attached or not. If the
355 * controller has slave link, device number 16 points to it.
356 *
357 * LOCKING:
358 * EH context.
359 */
360static void ata_force_link_limits(struct ata_link *link)
361{
362 bool did_spd = false;
363 int linkno = link->pmp;
364 int i;
365
366 if (ata_is_host_link(link))
367 linkno += 15;
368
369 for (i = ata_force_tbl_size - 1; i >= 0; i--) {
370 const struct ata_force_ent *fe = &ata_force_tbl[i];
371
372 if (fe->port != -1 && fe->port != link->ap->print_id)
373 continue;
374
375 if (fe->device != -1 && fe->device != linkno)
376 continue;
377
378 /* only honor the first spd limit */
379 if (!did_spd && fe->param.spd_limit) {
380 link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
381 ata_link_notice(link, "FORCE: PHY spd limit set to %s\n",
382 fe->param.name);
383 did_spd = true;
384 }
385
386 /* let lflags stack */
387 if (fe->param.lflags) {
388 link->flags |= fe->param.lflags;
389 ata_link_notice(link,
390 "FORCE: link flag 0x%x forced -> 0x%x\n",
391 fe->param.lflags, link->flags);
392 }
393 }
394}
395
396/**
397 * ata_force_xfermask - force xfermask according to libata.force
398 * @dev: ATA device of interest
399 *
400 * Force xfer_mask according to libata.force and whine about it.
401 * For consistency with link selection, device number 15 selects
402 * the first device connected to the host link.
403 *
404 * LOCKING:
405 * EH context.
406 */
407static void ata_force_xfermask(struct ata_device *dev)
408{
409 int devno = dev->link->pmp + dev->devno;
410 int alt_devno = devno;
411 int i;
412
413 /* allow n.15/16 for devices attached to host port */
414 if (ata_is_host_link(dev->link))
415 alt_devno += 15;
416
417 for (i = ata_force_tbl_size - 1; i >= 0; i--) {
418 const struct ata_force_ent *fe = &ata_force_tbl[i];
419 unsigned long pio_mask, mwdma_mask, udma_mask;
420
421 if (fe->port != -1 && fe->port != dev->link->ap->print_id)
422 continue;
423
424 if (fe->device != -1 && fe->device != devno &&
425 fe->device != alt_devno)
426 continue;
427
428 if (!fe->param.xfer_mask)
429 continue;
430
431 ata_unpack_xfermask(fe->param.xfer_mask,
432 &pio_mask, &mwdma_mask, &udma_mask);
433 if (udma_mask)
434 dev->udma_mask = udma_mask;
435 else if (mwdma_mask) {
436 dev->udma_mask = 0;
437 dev->mwdma_mask = mwdma_mask;
438 } else {
439 dev->udma_mask = 0;
440 dev->mwdma_mask = 0;
441 dev->pio_mask = pio_mask;
442 }
443
444 ata_dev_notice(dev, "FORCE: xfer_mask set to %s\n",
445 fe->param.name);
446 return;
447 }
448}
449
450/**
451 * ata_force_horkage - force horkage according to libata.force
452 * @dev: ATA device of interest
453 *
454 * Force horkage according to libata.force and whine about it.
455 * For consistency with link selection, device number 15 selects
456 * the first device connected to the host link.
457 *
458 * LOCKING:
459 * EH context.
460 */
461static void ata_force_horkage(struct ata_device *dev)
462{
463 int devno = dev->link->pmp + dev->devno;
464 int alt_devno = devno;
465 int i;
466
467 /* allow n.15/16 for devices attached to host port */
468 if (ata_is_host_link(dev->link))
469 alt_devno += 15;
470
471 for (i = 0; i < ata_force_tbl_size; i++) {
472 const struct ata_force_ent *fe = &ata_force_tbl[i];
473
474 if (fe->port != -1 && fe->port != dev->link->ap->print_id)
475 continue;
476
477 if (fe->device != -1 && fe->device != devno &&
478 fe->device != alt_devno)
479 continue;
480
481 if (!(~dev->horkage & fe->param.horkage_on) &&
482 !(dev->horkage & fe->param.horkage_off))
483 continue;
484
485 dev->horkage |= fe->param.horkage_on;
486 dev->horkage &= ~fe->param.horkage_off;
487
488 ata_dev_notice(dev, "FORCE: horkage modified (%s)\n",
489 fe->param.name);
490 }
491}
492
493/**
494 * atapi_cmd_type - Determine ATAPI command type from SCSI opcode
495 * @opcode: SCSI opcode
496 *
497 * Determine ATAPI command type from @opcode.
498 *
499 * LOCKING:
500 * None.
501 *
502 * RETURNS:
503 * ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC}
504 */
505int atapi_cmd_type(u8 opcode)
506{
507 switch (opcode) {
508 case GPCMD_READ_10:
509 case GPCMD_READ_12:
510 return ATAPI_READ;
511
512 case GPCMD_WRITE_10:
513 case GPCMD_WRITE_12:
514 case GPCMD_WRITE_AND_VERIFY_10:
515 return ATAPI_WRITE;
516
517 case GPCMD_READ_CD:
518 case GPCMD_READ_CD_MSF:
519 return ATAPI_READ_CD;
520
521 case ATA_16:
522 case ATA_12:
523 if (atapi_passthru16)
524 return ATAPI_PASS_THRU;
525 /* fall thru */
526 default:
527 return ATAPI_MISC;
528 }
529}
530
531/**
532 * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
533 * @tf: Taskfile to convert
534 * @pmp: Port multiplier port
535 * @is_cmd: This FIS is for command
536 * @fis: Buffer into which data will output
537 *
538 * Converts a standard ATA taskfile to a Serial ATA
539 * FIS structure (Register - Host to Device).
540 *
541 * LOCKING:
542 * Inherited from caller.
543 */
544void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis)
545{
546 fis[0] = 0x27; /* Register - Host to Device FIS */
547 fis[1] = pmp & 0xf; /* Port multiplier number*/
548 if (is_cmd)
549 fis[1] |= (1 << 7); /* bit 7 indicates Command FIS */
550
551 fis[2] = tf->command;
552 fis[3] = tf->feature;
553
554 fis[4] = tf->lbal;
555 fis[5] = tf->lbam;
556 fis[6] = tf->lbah;
557 fis[7] = tf->device;
558
559 fis[8] = tf->hob_lbal;
560 fis[9] = tf->hob_lbam;
561 fis[10] = tf->hob_lbah;
562 fis[11] = tf->hob_feature;
563
564 fis[12] = tf->nsect;
565 fis[13] = tf->hob_nsect;
566 fis[14] = 0;
567 fis[15] = tf->ctl;
568
569 fis[16] = 0;
570 fis[17] = 0;
571 fis[18] = 0;
572 fis[19] = 0;
573}
574
575/**
576 * ata_tf_from_fis - Convert SATA FIS to ATA taskfile
577 * @fis: Buffer from which data will be input
578 * @tf: Taskfile to output
579 *
580 * Converts a serial ATA FIS structure to a standard ATA taskfile.
581 *
582 * LOCKING:
583 * Inherited from caller.
584 */
585
586void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
587{
588 tf->command = fis[2]; /* status */
589 tf->feature = fis[3]; /* error */
590
591 tf->lbal = fis[4];
592 tf->lbam = fis[5];
593 tf->lbah = fis[6];
594 tf->device = fis[7];
595
596 tf->hob_lbal = fis[8];
597 tf->hob_lbam = fis[9];
598 tf->hob_lbah = fis[10];
599
600 tf->nsect = fis[12];
601 tf->hob_nsect = fis[13];
602}
603
604static const u8 ata_rw_cmds[] = {
605 /* pio multi */
606 ATA_CMD_READ_MULTI,
607 ATA_CMD_WRITE_MULTI,
608 ATA_CMD_READ_MULTI_EXT,
609 ATA_CMD_WRITE_MULTI_EXT,
610 0,
611 0,
612 0,
613 ATA_CMD_WRITE_MULTI_FUA_EXT,
614 /* pio */
615 ATA_CMD_PIO_READ,
616 ATA_CMD_PIO_WRITE,
617 ATA_CMD_PIO_READ_EXT,
618 ATA_CMD_PIO_WRITE_EXT,
619 0,
620 0,
621 0,
622 0,
623 /* dma */
624 ATA_CMD_READ,
625 ATA_CMD_WRITE,
626 ATA_CMD_READ_EXT,
627 ATA_CMD_WRITE_EXT,
628 0,
629 0,
630 0,
631 ATA_CMD_WRITE_FUA_EXT
632};
633
634/**
635 * ata_rwcmd_protocol - set taskfile r/w commands and protocol
636 * @tf: command to examine and configure
637 * @dev: device tf belongs to
638 *
639 * Examine the device configuration and tf->flags to calculate
640 * the proper read/write commands and protocol to use.
641 *
642 * LOCKING:
643 * caller.
644 */
645static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev)
646{
647 u8 cmd;
648
649 int index, fua, lba48, write;
650
651 fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0;
652 lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
653 write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
654
655 if (dev->flags & ATA_DFLAG_PIO) {
656 tf->protocol = ATA_PROT_PIO;
657 index = dev->multi_count ? 0 : 8;
658 } else if (lba48 && (dev->link->ap->flags & ATA_FLAG_PIO_LBA48)) {
659 /* Unable to use DMA due to host limitation */
660 tf->protocol = ATA_PROT_PIO;
661 index = dev->multi_count ? 0 : 8;
662 } else {
663 tf->protocol = ATA_PROT_DMA;
664 index = 16;
665 }
666
667 cmd = ata_rw_cmds[index + fua + lba48 + write];
668 if (cmd) {
669 tf->command = cmd;
670 return 0;
671 }
672 return -1;
673}
674
675/**
676 * ata_tf_read_block - Read block address from ATA taskfile
677 * @tf: ATA taskfile of interest
678 * @dev: ATA device @tf belongs to
679 *
680 * LOCKING:
681 * None.
682 *
683 * Read block address from @tf. This function can handle all
684 * three address formats - LBA, LBA48 and CHS. tf->protocol and
685 * flags select the address format to use.
686 *
687 * RETURNS:
688 * Block address read from @tf.
689 */
690u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
691{
692 u64 block = 0;
693
694 if (tf->flags & ATA_TFLAG_LBA) {
695 if (tf->flags & ATA_TFLAG_LBA48) {
696 block |= (u64)tf->hob_lbah << 40;
697 block |= (u64)tf->hob_lbam << 32;
698 block |= (u64)tf->hob_lbal << 24;
699 } else
700 block |= (tf->device & 0xf) << 24;
701
702 block |= tf->lbah << 16;
703 block |= tf->lbam << 8;
704 block |= tf->lbal;
705 } else {
706 u32 cyl, head, sect;
707
708 cyl = tf->lbam | (tf->lbah << 8);
709 head = tf->device & 0xf;
710 sect = tf->lbal;
711
712 if (!sect) {
713 ata_dev_warn(dev,
714 "device reported invalid CHS sector 0\n");
715 sect = 1; /* oh well */
716 }
717
718 block = (cyl * dev->heads + head) * dev->sectors + sect - 1;
719 }
720
721 return block;
722}
723
724/**
725 * ata_build_rw_tf - Build ATA taskfile for given read/write request
726 * @tf: Target ATA taskfile
727 * @dev: ATA device @tf belongs to
728 * @block: Block address
729 * @n_block: Number of blocks
730 * @tf_flags: RW/FUA etc...
731 * @tag: tag
732 *
733 * LOCKING:
734 * None.
735 *
736 * Build ATA taskfile @tf for read/write request described by
737 * @block, @n_block, @tf_flags and @tag on @dev.
738 *
739 * RETURNS:
740 *
741 * 0 on success, -ERANGE if the request is too large for @dev,
742 * -EINVAL if the request is invalid.
743 */
744int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
745 u64 block, u32 n_block, unsigned int tf_flags,
746 unsigned int tag)
747{
748 tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
749 tf->flags |= tf_flags;
750
751 if (ata_ncq_enabled(dev) && likely(tag != ATA_TAG_INTERNAL)) {
752 /* yay, NCQ */
753 if (!lba_48_ok(block, n_block))
754 return -ERANGE;
755
756 tf->protocol = ATA_PROT_NCQ;
757 tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
758
759 if (tf->flags & ATA_TFLAG_WRITE)
760 tf->command = ATA_CMD_FPDMA_WRITE;
761 else
762 tf->command = ATA_CMD_FPDMA_READ;
763
764 tf->nsect = tag << 3;
765 tf->hob_feature = (n_block >> 8) & 0xff;
766 tf->feature = n_block & 0xff;
767
768 tf->hob_lbah = (block >> 40) & 0xff;
769 tf->hob_lbam = (block >> 32) & 0xff;
770 tf->hob_lbal = (block >> 24) & 0xff;
771 tf->lbah = (block >> 16) & 0xff;
772 tf->lbam = (block >> 8) & 0xff;
773 tf->lbal = block & 0xff;
774
775 tf->device = 1 << 6;
776 if (tf->flags & ATA_TFLAG_FUA)
777 tf->device |= 1 << 7;
778 } else if (dev->flags & ATA_DFLAG_LBA) {
779 tf->flags |= ATA_TFLAG_LBA;
780
781 if (lba_28_ok(block, n_block)) {
782 /* use LBA28 */
783 tf->device |= (block >> 24) & 0xf;
784 } else if (lba_48_ok(block, n_block)) {
785 if (!(dev->flags & ATA_DFLAG_LBA48))
786 return -ERANGE;
787
788 /* use LBA48 */
789 tf->flags |= ATA_TFLAG_LBA48;
790
791 tf->hob_nsect = (n_block >> 8) & 0xff;
792
793 tf->hob_lbah = (block >> 40) & 0xff;
794 tf->hob_lbam = (block >> 32) & 0xff;
795 tf->hob_lbal = (block >> 24) & 0xff;
796 } else
797 /* request too large even for LBA48 */
798 return -ERANGE;
799
800 if (unlikely(ata_rwcmd_protocol(tf, dev) < 0))
801 return -EINVAL;
802
803 tf->nsect = n_block & 0xff;
804
805 tf->lbah = (block >> 16) & 0xff;
806 tf->lbam = (block >> 8) & 0xff;
807 tf->lbal = block & 0xff;
808
809 tf->device |= ATA_LBA;
810 } else {
811 /* CHS */
812 u32 sect, head, cyl, track;
813
814 /* The request -may- be too large for CHS addressing. */
815 if (!lba_28_ok(block, n_block))
816 return -ERANGE;
817
818 if (unlikely(ata_rwcmd_protocol(tf, dev) < 0))
819 return -EINVAL;
820
821 /* Convert LBA to CHS */
822 track = (u32)block / dev->sectors;
823 cyl = track / dev->heads;
824 head = track % dev->heads;
825 sect = (u32)block % dev->sectors + 1;
826
827 DPRINTK("block %u track %u cyl %u head %u sect %u\n",
828 (u32)block, track, cyl, head, sect);
829
830 /* Check whether the converted CHS can fit.
831 Cylinder: 0-65535
832 Head: 0-15
833 Sector: 1-255*/
834 if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
835 return -ERANGE;
836
837 tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
838 tf->lbal = sect;
839 tf->lbam = cyl;
840 tf->lbah = cyl >> 8;
841 tf->device |= head;
842 }
843
844 return 0;
845}
846
847/**
848 * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask
849 * @pio_mask: pio_mask
850 * @mwdma_mask: mwdma_mask
851 * @udma_mask: udma_mask
852 *
853 * Pack @pio_mask, @mwdma_mask and @udma_mask into a single
854 * unsigned int xfer_mask.
855 *
856 * LOCKING:
857 * None.
858 *
859 * RETURNS:
860 * Packed xfer_mask.
861 */
862unsigned long ata_pack_xfermask(unsigned long pio_mask,
863 unsigned long mwdma_mask,
864 unsigned long udma_mask)
865{
866 return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) |
867 ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) |
868 ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA);
869}
870
871/**
872 * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks
873 * @xfer_mask: xfer_mask to unpack
874 * @pio_mask: resulting pio_mask
875 * @mwdma_mask: resulting mwdma_mask
876 * @udma_mask: resulting udma_mask
877 *
878 * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask.
879 * Any NULL distination masks will be ignored.
880 */
881void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask,
882 unsigned long *mwdma_mask, unsigned long *udma_mask)
883{
884 if (pio_mask)
885 *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO;
886 if (mwdma_mask)
887 *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA;
888 if (udma_mask)
889 *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA;
890}
891
892static const struct ata_xfer_ent {
893 int shift, bits;
894 u8 base;
895} ata_xfer_tbl[] = {
896 { ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 },
897 { ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 },
898 { ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 },
899 { -1, },
900};
901
902/**
903 * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask
904 * @xfer_mask: xfer_mask of interest
905 *
906 * Return matching XFER_* value for @xfer_mask. Only the highest
907 * bit of @xfer_mask is considered.
908 *
909 * LOCKING:
910 * None.
911 *
912 * RETURNS:
913 * Matching XFER_* value, 0xff if no match found.
914 */
915u8 ata_xfer_mask2mode(unsigned long xfer_mask)
916{
917 int highbit = fls(xfer_mask) - 1;
918 const struct ata_xfer_ent *ent;
919
920 for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
921 if (highbit >= ent->shift && highbit < ent->shift + ent->bits)
922 return ent->base + highbit - ent->shift;
923 return 0xff;
924}
925
926/**
927 * ata_xfer_mode2mask - Find matching xfer_mask for XFER_*
928 * @xfer_mode: XFER_* of interest
929 *
930 * Return matching xfer_mask for @xfer_mode.
931 *
932 * LOCKING:
933 * None.
934 *
935 * RETURNS:
936 * Matching xfer_mask, 0 if no match found.
937 */
938unsigned long ata_xfer_mode2mask(u8 xfer_mode)
939{
940 const struct ata_xfer_ent *ent;
941
942 for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
943 if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
944 return ((2 << (ent->shift + xfer_mode - ent->base)) - 1)
945 & ~((1 << ent->shift) - 1);
946 return 0;
947}
948
949/**
950 * ata_xfer_mode2shift - Find matching xfer_shift for XFER_*
951 * @xfer_mode: XFER_* of interest
952 *
953 * Return matching xfer_shift for @xfer_mode.
954 *
955 * LOCKING:
956 * None.
957 *
958 * RETURNS:
959 * Matching xfer_shift, -1 if no match found.
960 */
961int ata_xfer_mode2shift(unsigned long xfer_mode)
962{
963 const struct ata_xfer_ent *ent;
964
965 for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
966 if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
967 return ent->shift;
968 return -1;
969}
970
971/**
972 * ata_mode_string - convert xfer_mask to string
973 * @xfer_mask: mask of bits supported; only highest bit counts.
974 *
975 * Determine string which represents the highest speed
976 * (highest bit in @modemask).
977 *
978 * LOCKING:
979 * None.
980 *
981 * RETURNS:
982 * Constant C string representing highest speed listed in
983 * @mode_mask, or the constant C string "<n/a>".
984 */
985const char *ata_mode_string(unsigned long xfer_mask)
986{
987 static const char * const xfer_mode_str[] = {
988 "PIO0",
989 "PIO1",
990 "PIO2",
991 "PIO3",
992 "PIO4",
993 "PIO5",
994 "PIO6",
995 "MWDMA0",
996 "MWDMA1",
997 "MWDMA2",
998 "MWDMA3",
999 "MWDMA4",
1000 "UDMA/16",
1001 "UDMA/25",
1002 "UDMA/33",
1003 "UDMA/44",
1004 "UDMA/66",
1005 "UDMA/100",
1006 "UDMA/133",
1007 "UDMA7",
1008 };
1009 int highbit;
1010
1011 highbit = fls(xfer_mask) - 1;
1012 if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str))
1013 return xfer_mode_str[highbit];
1014 return "<n/a>";
1015}
1016
1017const char *sata_spd_string(unsigned int spd)
1018{
1019 static const char * const spd_str[] = {
1020 "1.5 Gbps",
1021 "3.0 Gbps",
1022 "6.0 Gbps",
1023 };
1024
1025 if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str))
1026 return "<unknown>";
1027 return spd_str[spd - 1];
1028}
1029
1030/**
1031 * ata_dev_classify - determine device type based on ATA-spec signature
1032 * @tf: ATA taskfile register set for device to be identified
1033 *
1034 * Determine from taskfile register contents whether a device is
1035 * ATA or ATAPI, as per "Signature and persistence" section
1036 * of ATA/PI spec (volume 1, sect 5.14).
1037 *
1038 * LOCKING:
1039 * None.
1040 *
1041 * RETURNS:
1042 * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, %ATA_DEV_PMP or
1043 * %ATA_DEV_UNKNOWN the event of failure.
1044 */
1045unsigned int ata_dev_classify(const struct ata_taskfile *tf)
1046{
1047 /* Apple's open source Darwin code hints that some devices only
1048 * put a proper signature into the LBA mid/high registers,
1049 * So, we only check those. It's sufficient for uniqueness.
1050 *
1051 * ATA/ATAPI-7 (d1532v1r1: Feb. 19, 2003) specified separate
1052 * signatures for ATA and ATAPI devices attached on SerialATA,
1053 * 0x3c/0xc3 and 0x69/0x96 respectively. However, SerialATA
1054 * spec has never mentioned about using different signatures
1055 * for ATA/ATAPI devices. Then, Serial ATA II: Port
1056 * Multiplier specification began to use 0x69/0x96 to identify
1057 * port multpliers and 0x3c/0xc3 to identify SEMB device.
1058 * ATA/ATAPI-7 dropped descriptions about 0x3c/0xc3 and
1059 * 0x69/0x96 shortly and described them as reserved for
1060 * SerialATA.
1061 *
1062 * We follow the current spec and consider that 0x69/0x96
1063 * identifies a port multiplier and 0x3c/0xc3 a SEMB device.
1064 * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports
1065 * SEMB signature. This is worked around in
1066 * ata_dev_read_id().
1067 */
1068 if ((tf->lbam == 0) && (tf->lbah == 0)) {
1069 DPRINTK("found ATA device by sig\n");
1070 return ATA_DEV_ATA;
1071 }
1072
1073 if ((tf->lbam == 0x14) && (tf->lbah == 0xeb)) {
1074 DPRINTK("found ATAPI device by sig\n");
1075 return ATA_DEV_ATAPI;
1076 }
1077
1078 if ((tf->lbam == 0x69) && (tf->lbah == 0x96)) {
1079 DPRINTK("found PMP device by sig\n");
1080 return ATA_DEV_PMP;
1081 }
1082
1083 if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) {
1084 DPRINTK("found SEMB device by sig (could be ATA device)\n");
1085 return ATA_DEV_SEMB;
1086 }
1087
1088 DPRINTK("unknown device\n");
1089 return ATA_DEV_UNKNOWN;
1090}
1091
1092/**
1093 * ata_id_string - Convert IDENTIFY DEVICE page into string
1094 * @id: IDENTIFY DEVICE results we will examine
1095 * @s: string into which data is output
1096 * @ofs: offset into identify device page
1097 * @len: length of string to return. must be an even number.
1098 *
1099 * The strings in the IDENTIFY DEVICE page are broken up into
1100 * 16-bit chunks. Run through the string, and output each
1101 * 8-bit chunk linearly, regardless of platform.
1102 *
1103 * LOCKING:
1104 * caller.
1105 */
1106
1107void ata_id_string(const u16 *id, unsigned char *s,
1108 unsigned int ofs, unsigned int len)
1109{
1110 unsigned int c;
1111
1112 BUG_ON(len & 1);
1113
1114 while (len > 0) {
1115 c = id[ofs] >> 8;
1116 *s = c;
1117 s++;
1118
1119 c = id[ofs] & 0xff;
1120 *s = c;
1121 s++;
1122
1123 ofs++;
1124 len -= 2;
1125 }
1126}
1127
1128/**
1129 * ata_id_c_string - Convert IDENTIFY DEVICE page into C string
1130 * @id: IDENTIFY DEVICE results we will examine
1131 * @s: string into which data is output
1132 * @ofs: offset into identify device page
1133 * @len: length of string to return. must be an odd number.
1134 *
1135 * This function is identical to ata_id_string except that it
1136 * trims trailing spaces and terminates the resulting string with
1137 * null. @len must be actual maximum length (even number) + 1.
1138 *
1139 * LOCKING:
1140 * caller.
1141 */
1142void ata_id_c_string(const u16 *id, unsigned char *s,
1143 unsigned int ofs, unsigned int len)
1144{
1145 unsigned char *p;
1146
1147 ata_id_string(id, s, ofs, len - 1);
1148
1149 p = s + strnlen(s, len - 1);
1150 while (p > s && p[-1] == ' ')
1151 p--;
1152 *p = '\0';
1153}
1154
1155static u64 ata_id_n_sectors(const u16 *id)
1156{
1157 if (ata_id_has_lba(id)) {
1158 if (ata_id_has_lba48(id))
1159 return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
1160 else
1161 return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
1162 } else {
1163 if (ata_id_current_chs_valid(id))
1164 return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] *
1165 id[ATA_ID_CUR_SECTORS];
1166 else
1167 return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] *
1168 id[ATA_ID_SECTORS];
1169 }
1170}
1171
1172u64 ata_tf_to_lba48(const struct ata_taskfile *tf)
1173{
1174 u64 sectors = 0;
1175
1176 sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
1177 sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
1178 sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24;
1179 sectors |= (tf->lbah & 0xff) << 16;
1180 sectors |= (tf->lbam & 0xff) << 8;
1181 sectors |= (tf->lbal & 0xff);
1182
1183 return sectors;
1184}
1185
1186u64 ata_tf_to_lba(const struct ata_taskfile *tf)
1187{
1188 u64 sectors = 0;
1189
1190 sectors |= (tf->device & 0x0f) << 24;
1191 sectors |= (tf->lbah & 0xff) << 16;
1192 sectors |= (tf->lbam & 0xff) << 8;
1193 sectors |= (tf->lbal & 0xff);
1194
1195 return sectors;
1196}
1197
1198/**
1199 * ata_read_native_max_address - Read native max address
1200 * @dev: target device
1201 * @max_sectors: out parameter for the result native max address
1202 *
1203 * Perform an LBA48 or LBA28 native size query upon the device in
1204 * question.
1205 *
1206 * RETURNS:
1207 * 0 on success, -EACCES if command is aborted by the drive.
1208 * -EIO on other errors.
1209 */
1210static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors)
1211{
1212 unsigned int err_mask;
1213 struct ata_taskfile tf;
1214 int lba48 = ata_id_has_lba48(dev->id);
1215
1216 ata_tf_init(dev, &tf);
1217
1218 /* always clear all address registers */
1219 tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
1220
1221 if (lba48) {
1222 tf.command = ATA_CMD_READ_NATIVE_MAX_EXT;
1223 tf.flags |= ATA_TFLAG_LBA48;
1224 } else
1225 tf.command = ATA_CMD_READ_NATIVE_MAX;
1226
1227 tf.protocol |= ATA_PROT_NODATA;
1228 tf.device |= ATA_LBA;
1229
1230 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
1231 if (err_mask) {
1232 ata_dev_warn(dev,
1233 "failed to read native max address (err_mask=0x%x)\n",
1234 err_mask);
1235 if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
1236 return -EACCES;
1237 return -EIO;
1238 }
1239
1240 if (lba48)
1241 *max_sectors = ata_tf_to_lba48(&tf) + 1;
1242 else
1243 *max_sectors = ata_tf_to_lba(&tf) + 1;
1244 if (dev->horkage & ATA_HORKAGE_HPA_SIZE)
1245 (*max_sectors)--;
1246 return 0;
1247}
1248
1249/**
1250 * ata_set_max_sectors - Set max sectors
1251 * @dev: target device
1252 * @new_sectors: new max sectors value to set for the device
1253 *
1254 * Set max sectors of @dev to @new_sectors.
1255 *
1256 * RETURNS:
1257 * 0 on success, -EACCES if command is aborted or denied (due to
1258 * previous non-volatile SET_MAX) by the drive. -EIO on other
1259 * errors.
1260 */
1261static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors)
1262{
1263 unsigned int err_mask;
1264 struct ata_taskfile tf;
1265 int lba48 = ata_id_has_lba48(dev->id);
1266
1267 new_sectors--;
1268
1269 ata_tf_init(dev, &tf);
1270
1271 tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
1272
1273 if (lba48) {
1274 tf.command = ATA_CMD_SET_MAX_EXT;
1275 tf.flags |= ATA_TFLAG_LBA48;
1276
1277 tf.hob_lbal = (new_sectors >> 24) & 0xff;
1278 tf.hob_lbam = (new_sectors >> 32) & 0xff;
1279 tf.hob_lbah = (new_sectors >> 40) & 0xff;
1280 } else {
1281 tf.command = ATA_CMD_SET_MAX;
1282
1283 tf.device |= (new_sectors >> 24) & 0xf;
1284 }
1285
1286 tf.protocol |= ATA_PROT_NODATA;
1287 tf.device |= ATA_LBA;
1288
1289 tf.lbal = (new_sectors >> 0) & 0xff;
1290 tf.lbam = (new_sectors >> 8) & 0xff;
1291 tf.lbah = (new_sectors >> 16) & 0xff;
1292
1293 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
1294 if (err_mask) {
1295 ata_dev_warn(dev,
1296 "failed to set max address (err_mask=0x%x)\n",
1297 err_mask);
1298 if (err_mask == AC_ERR_DEV &&
1299 (tf.feature & (ATA_ABORTED | ATA_IDNF)))
1300 return -EACCES;
1301 return -EIO;
1302 }
1303
1304 return 0;
1305}
1306
1307/**
1308 * ata_hpa_resize - Resize a device with an HPA set
1309 * @dev: Device to resize
1310 *
1311 * Read the size of an LBA28 or LBA48 disk with HPA features and resize
1312 * it if required to the full size of the media. The caller must check
1313 * the drive has the HPA feature set enabled.
1314 *
1315 * RETURNS:
1316 * 0 on success, -errno on failure.
1317 */
1318static int ata_hpa_resize(struct ata_device *dev)
1319{
1320 struct ata_eh_context *ehc = &dev->link->eh_context;
1321 int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
1322 bool unlock_hpa = ata_ignore_hpa || dev->flags & ATA_DFLAG_UNLOCK_HPA;
1323 u64 sectors = ata_id_n_sectors(dev->id);
1324 u64 native_sectors;
1325 int rc;
1326
1327 /* do we need to do it? */
1328 if (dev->class != ATA_DEV_ATA ||
1329 !ata_id_has_lba(dev->id) || !ata_id_hpa_enabled(dev->id) ||
1330 (dev->horkage & ATA_HORKAGE_BROKEN_HPA))
1331 return 0;
1332
1333 /* read native max address */
1334 rc = ata_read_native_max_address(dev, &native_sectors);
1335 if (rc) {
1336 /* If device aborted the command or HPA isn't going to
1337 * be unlocked, skip HPA resizing.
1338 */
1339 if (rc == -EACCES || !unlock_hpa) {
1340 ata_dev_warn(dev,
1341 "HPA support seems broken, skipping HPA handling\n");
1342 dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
1343
1344 /* we can continue if device aborted the command */
1345 if (rc == -EACCES)
1346 rc = 0;
1347 }
1348
1349 return rc;
1350 }
1351 dev->n_native_sectors = native_sectors;
1352
1353 /* nothing to do? */
1354 if (native_sectors <= sectors || !unlock_hpa) {
1355 if (!print_info || native_sectors == sectors)
1356 return 0;
1357
1358 if (native_sectors > sectors)
1359 ata_dev_info(dev,
1360 "HPA detected: current %llu, native %llu\n",
1361 (unsigned long long)sectors,
1362 (unsigned long long)native_sectors);
1363 else if (native_sectors < sectors)
1364 ata_dev_warn(dev,
1365 "native sectors (%llu) is smaller than sectors (%llu)\n",
1366 (unsigned long long)native_sectors,
1367 (unsigned long long)sectors);
1368 return 0;
1369 }
1370
1371 /* let's unlock HPA */
1372 rc = ata_set_max_sectors(dev, native_sectors);
1373 if (rc == -EACCES) {
1374 /* if device aborted the command, skip HPA resizing */
1375 ata_dev_warn(dev,
1376 "device aborted resize (%llu -> %llu), skipping HPA handling\n",
1377 (unsigned long long)sectors,
1378 (unsigned long long)native_sectors);
1379 dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
1380 return 0;
1381 } else if (rc)
1382 return rc;
1383
1384 /* re-read IDENTIFY data */
1385 rc = ata_dev_reread_id(dev, 0);
1386 if (rc) {
1387 ata_dev_err(dev,
1388 "failed to re-read IDENTIFY data after HPA resizing\n");
1389 return rc;
1390 }
1391
1392 if (print_info) {
1393 u64 new_sectors = ata_id_n_sectors(dev->id);
1394 ata_dev_info(dev,
1395 "HPA unlocked: %llu -> %llu, native %llu\n",
1396 (unsigned long long)sectors,
1397 (unsigned long long)new_sectors,
1398 (unsigned long long)native_sectors);
1399 }
1400
1401 return 0;
1402}
1403
1404/**
1405 * ata_dump_id - IDENTIFY DEVICE info debugging output
1406 * @id: IDENTIFY DEVICE page to dump
1407 *
1408 * Dump selected 16-bit words from the given IDENTIFY DEVICE
1409 * page.
1410 *
1411 * LOCKING:
1412 * caller.
1413 */
1414
1415static inline void ata_dump_id(const u16 *id)
1416{
1417 DPRINTK("49==0x%04x "
1418 "53==0x%04x "
1419 "63==0x%04x "
1420 "64==0x%04x "
1421 "75==0x%04x \n",
1422 id[49],
1423 id[53],
1424 id[63],
1425 id[64],
1426 id[75]);
1427 DPRINTK("80==0x%04x "
1428 "81==0x%04x "
1429 "82==0x%04x "
1430 "83==0x%04x "
1431 "84==0x%04x \n",
1432 id[80],
1433 id[81],
1434 id[82],
1435 id[83],
1436 id[84]);
1437 DPRINTK("88==0x%04x "
1438 "93==0x%04x\n",
1439 id[88],
1440 id[93]);
1441}
1442
1443/**
1444 * ata_id_xfermask - Compute xfermask from the given IDENTIFY data
1445 * @id: IDENTIFY data to compute xfer mask from
1446 *
1447 * Compute the xfermask for this device. This is not as trivial
1448 * as it seems if we must consider early devices correctly.
1449 *
1450 * FIXME: pre IDE drive timing (do we care ?).
1451 *
1452 * LOCKING:
1453 * None.
1454 *
1455 * RETURNS:
1456 * Computed xfermask
1457 */
1458unsigned long ata_id_xfermask(const u16 *id)
1459{
1460 unsigned long pio_mask, mwdma_mask, udma_mask;
1461
1462 /* Usual case. Word 53 indicates word 64 is valid */
1463 if (id[ATA_ID_FIELD_VALID] & (1 << 1)) {
1464 pio_mask = id[ATA_ID_PIO_MODES] & 0x03;
1465 pio_mask <<= 3;
1466 pio_mask |= 0x7;
1467 } else {
1468 /* If word 64 isn't valid then Word 51 high byte holds
1469 * the PIO timing number for the maximum. Turn it into
1470 * a mask.
1471 */
1472 u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF;
1473 if (mode < 5) /* Valid PIO range */
1474 pio_mask = (2 << mode) - 1;
1475 else
1476 pio_mask = 1;
1477
1478 /* But wait.. there's more. Design your standards by
1479 * committee and you too can get a free iordy field to
1480 * process. However its the speeds not the modes that
1481 * are supported... Note drivers using the timing API
1482 * will get this right anyway
1483 */
1484 }
1485
1486 mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07;
1487
1488 if (ata_id_is_cfa(id)) {
1489 /*
1490 * Process compact flash extended modes
1491 */
1492 int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7;
1493 int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7;
1494
1495 if (pio)
1496 pio_mask |= (1 << 5);
1497 if (pio > 1)
1498 pio_mask |= (1 << 6);
1499 if (dma)
1500 mwdma_mask |= (1 << 3);
1501 if (dma > 1)
1502 mwdma_mask |= (1 << 4);
1503 }
1504
1505 udma_mask = 0;
1506 if (id[ATA_ID_FIELD_VALID] & (1 << 2))
1507 udma_mask = id[ATA_ID_UDMA_MODES] & 0xff;
1508
1509 return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
1510}
1511
1512static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
1513{
1514 struct completion *waiting = qc->private_data;
1515
1516 complete(waiting);
1517}
1518
1519/**
1520 * ata_exec_internal_sg - execute libata internal command
1521 * @dev: Device to which the command is sent
1522 * @tf: Taskfile registers for the command and the result
1523 * @cdb: CDB for packet command
1524 * @dma_dir: Data tranfer direction of the command
1525 * @sgl: sg list for the data buffer of the command
1526 * @n_elem: Number of sg entries
1527 * @timeout: Timeout in msecs (0 for default)
1528 *
1529 * Executes libata internal command with timeout. @tf contains
1530 * command on entry and result on return. Timeout and error
1531 * conditions are reported via return value. No recovery action
1532 * is taken after a command times out. It's caller's duty to
1533 * clean up after timeout.
1534 *
1535 * LOCKING:
1536 * None. Should be called with kernel context, might sleep.
1537 *
1538 * RETURNS:
1539 * Zero on success, AC_ERR_* mask on failure
1540 */
1541unsigned ata_exec_internal_sg(struct ata_device *dev,
1542 struct ata_taskfile *tf, const u8 *cdb,
1543 int dma_dir, struct scatterlist *sgl,
1544 unsigned int n_elem, unsigned long timeout)
1545{
1546 struct ata_link *link = dev->link;
1547 struct ata_port *ap = link->ap;
1548 u8 command = tf->command;
1549 int auto_timeout = 0;
1550 struct ata_queued_cmd *qc;
1551 unsigned int tag, preempted_tag;
1552 u32 preempted_sactive, preempted_qc_active;
1553 int preempted_nr_active_links;
1554 DECLARE_COMPLETION_ONSTACK(wait);
1555 unsigned long flags;
1556 unsigned int err_mask;
1557 int rc;
1558
1559 spin_lock_irqsave(ap->lock, flags);
1560
1561 /* no internal command while frozen */
1562 if (ap->pflags & ATA_PFLAG_FROZEN) {
1563 spin_unlock_irqrestore(ap->lock, flags);
1564 return AC_ERR_SYSTEM;
1565 }
1566
1567 /* initialize internal qc */
1568
1569 /* XXX: Tag 0 is used for drivers with legacy EH as some
1570 * drivers choke if any other tag is given. This breaks
1571 * ata_tag_internal() test for those drivers. Don't use new
1572 * EH stuff without converting to it.
1573 */
1574 if (ap->ops->error_handler)
1575 tag = ATA_TAG_INTERNAL;
1576 else
1577 tag = 0;
1578
1579 if (test_and_set_bit(tag, &ap->qc_allocated))
1580 BUG();
1581 qc = __ata_qc_from_tag(ap, tag);
1582
1583 qc->tag = tag;
1584 qc->scsicmd = NULL;
1585 qc->ap = ap;
1586 qc->dev = dev;
1587 ata_qc_reinit(qc);
1588
1589 preempted_tag = link->active_tag;
1590 preempted_sactive = link->sactive;
1591 preempted_qc_active = ap->qc_active;
1592 preempted_nr_active_links = ap->nr_active_links;
1593 link->active_tag = ATA_TAG_POISON;
1594 link->sactive = 0;
1595 ap->qc_active = 0;
1596 ap->nr_active_links = 0;
1597
1598 /* prepare & issue qc */
1599 qc->tf = *tf;
1600 if (cdb)
1601 memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);
1602 qc->flags |= ATA_QCFLAG_RESULT_TF;
1603 qc->dma_dir = dma_dir;
1604 if (dma_dir != DMA_NONE) {
1605 unsigned int i, buflen = 0;
1606 struct scatterlist *sg;
1607
1608 for_each_sg(sgl, sg, n_elem, i)
1609 buflen += sg->length;
1610
1611 ata_sg_init(qc, sgl, n_elem);
1612 qc->nbytes = buflen;
1613 }
1614
1615 qc->private_data = &wait;
1616 qc->complete_fn = ata_qc_complete_internal;
1617
1618 ata_qc_issue(qc);
1619
1620 spin_unlock_irqrestore(ap->lock, flags);
1621
1622 if (!timeout) {
1623 if (ata_probe_timeout)
1624 timeout = ata_probe_timeout * 1000;
1625 else {
1626 timeout = ata_internal_cmd_timeout(dev, command);
1627 auto_timeout = 1;
1628 }
1629 }
1630
1631 if (ap->ops->error_handler)
1632 ata_eh_release(ap);
1633
1634 rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
1635
1636 if (ap->ops->error_handler)
1637 ata_eh_acquire(ap);
1638
1639 ata_sff_flush_pio_task(ap);
1640
1641 if (!rc) {
1642 spin_lock_irqsave(ap->lock, flags);
1643
1644 /* We're racing with irq here. If we lose, the
1645 * following test prevents us from completing the qc
1646 * twice. If we win, the port is frozen and will be
1647 * cleaned up by ->post_internal_cmd().
1648 */
1649 if (qc->flags & ATA_QCFLAG_ACTIVE) {
1650 qc->err_mask |= AC_ERR_TIMEOUT;
1651
1652 if (ap->ops->error_handler)
1653 ata_port_freeze(ap);
1654 else
1655 ata_qc_complete(qc);
1656
1657 if (ata_msg_warn(ap))
1658 ata_dev_warn(dev, "qc timeout (cmd 0x%x)\n",
1659 command);
1660 }
1661
1662 spin_unlock_irqrestore(ap->lock, flags);
1663 }
1664
1665 /* do post_internal_cmd */
1666 if (ap->ops->post_internal_cmd)
1667 ap->ops->post_internal_cmd(qc);
1668
1669 /* perform minimal error analysis */
1670 if (qc->flags & ATA_QCFLAG_FAILED) {
1671 if (qc->result_tf.command & (ATA_ERR | ATA_DF))
1672 qc->err_mask |= AC_ERR_DEV;
1673
1674 if (!qc->err_mask)
1675 qc->err_mask |= AC_ERR_OTHER;
1676
1677 if (qc->err_mask & ~AC_ERR_OTHER)
1678 qc->err_mask &= ~AC_ERR_OTHER;
1679 }
1680
1681 /* finish up */
1682 spin_lock_irqsave(ap->lock, flags);
1683
1684 *tf = qc->result_tf;
1685 err_mask = qc->err_mask;
1686
1687 ata_qc_free(qc);
1688 link->active_tag = preempted_tag;
1689 link->sactive = preempted_sactive;
1690 ap->qc_active = preempted_qc_active;
1691 ap->nr_active_links = preempted_nr_active_links;
1692
1693 spin_unlock_irqrestore(ap->lock, flags);
1694
1695 if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout)
1696 ata_internal_cmd_timed_out(dev, command);
1697
1698 return err_mask;
1699}
1700
1701/**
1702 * ata_exec_internal - execute libata internal command
1703 * @dev: Device to which the command is sent
1704 * @tf: Taskfile registers for the command and the result
1705 * @cdb: CDB for packet command
1706 * @dma_dir: Data tranfer direction of the command
1707 * @buf: Data buffer of the command
1708 * @buflen: Length of data buffer
1709 * @timeout: Timeout in msecs (0 for default)
1710 *
1711 * Wrapper around ata_exec_internal_sg() which takes simple
1712 * buffer instead of sg list.
1713 *
1714 * LOCKING:
1715 * None. Should be called with kernel context, might sleep.
1716 *
1717 * RETURNS:
1718 * Zero on success, AC_ERR_* mask on failure
1719 */
1720unsigned ata_exec_internal(struct ata_device *dev,
1721 struct ata_taskfile *tf, const u8 *cdb,
1722 int dma_dir, void *buf, unsigned int buflen,
1723 unsigned long timeout)
1724{
1725 struct scatterlist *psg = NULL, sg;
1726 unsigned int n_elem = 0;
1727
1728 if (dma_dir != DMA_NONE) {
1729 WARN_ON(!buf);
1730 sg_init_one(&sg, buf, buflen);
1731 psg = &sg;
1732 n_elem++;
1733 }
1734
1735 return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem,
1736 timeout);
1737}
1738
1739/**
1740 * ata_do_simple_cmd - execute simple internal command
1741 * @dev: Device to which the command is sent
1742 * @cmd: Opcode to execute
1743 *
1744 * Execute a 'simple' command, that only consists of the opcode
1745 * 'cmd' itself, without filling any other registers
1746 *
1747 * LOCKING:
1748 * Kernel thread context (may sleep).
1749 *
1750 * RETURNS:
1751 * Zero on success, AC_ERR_* mask on failure
1752 */
1753unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
1754{
1755 struct ata_taskfile tf;
1756
1757 ata_tf_init(dev, &tf);
1758
1759 tf.command = cmd;
1760 tf.flags |= ATA_TFLAG_DEVICE;
1761 tf.protocol = ATA_PROT_NODATA;
1762
1763 return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
1764}
1765
1766/**
1767 * ata_pio_need_iordy - check if iordy needed
1768 * @adev: ATA device
1769 *
1770 * Check if the current speed of the device requires IORDY. Used
1771 * by various controllers for chip configuration.
1772 */
1773unsigned int ata_pio_need_iordy(const struct ata_device *adev)
1774{
1775 /* Don't set IORDY if we're preparing for reset. IORDY may
1776 * lead to controller lock up on certain controllers if the
1777 * port is not occupied. See bko#11703 for details.
1778 */
1779 if (adev->link->ap->pflags & ATA_PFLAG_RESETTING)
1780 return 0;
1781 /* Controller doesn't support IORDY. Probably a pointless
1782 * check as the caller should know this.
1783 */
1784 if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
1785 return 0;
1786 /* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */
1787 if (ata_id_is_cfa(adev->id)
1788 && (adev->pio_mode == XFER_PIO_5 || adev->pio_mode == XFER_PIO_6))
1789 return 0;
1790 /* PIO3 and higher it is mandatory */
1791 if (adev->pio_mode > XFER_PIO_2)
1792 return 1;
1793 /* We turn it on when possible */
1794 if (ata_id_has_iordy(adev->id))
1795 return 1;
1796 return 0;
1797}
1798
1799/**
1800 * ata_pio_mask_no_iordy - Return the non IORDY mask
1801 * @adev: ATA device
1802 *
1803 * Compute the highest mode possible if we are not using iordy. Return
1804 * -1 if no iordy mode is available.
1805 */
1806static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
1807{
1808 /* If we have no drive specific rule, then PIO 2 is non IORDY */
1809 if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */
1810 u16 pio = adev->id[ATA_ID_EIDE_PIO];
1811 /* Is the speed faster than the drive allows non IORDY ? */
1812 if (pio) {
1813 /* This is cycle times not frequency - watch the logic! */
1814 if (pio > 240) /* PIO2 is 240nS per cycle */
1815 return 3 << ATA_SHIFT_PIO;
1816 return 7 << ATA_SHIFT_PIO;
1817 }
1818 }
1819 return 3 << ATA_SHIFT_PIO;
1820}
1821
1822/**
1823 * ata_do_dev_read_id - default ID read method
1824 * @dev: device
1825 * @tf: proposed taskfile
1826 * @id: data buffer
1827 *
1828 * Issue the identify taskfile and hand back the buffer containing
1829 * identify data. For some RAID controllers and for pre ATA devices
1830 * this function is wrapped or replaced by the driver
1831 */
1832unsigned int ata_do_dev_read_id(struct ata_device *dev,
1833 struct ata_taskfile *tf, u16 *id)
1834{
1835 return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
1836 id, sizeof(id[0]) * ATA_ID_WORDS, 0);
1837}
1838
1839/**
1840 * ata_dev_read_id - Read ID data from the specified device
1841 * @dev: target device
1842 * @p_class: pointer to class of the target device (may be changed)
1843 * @flags: ATA_READID_* flags
1844 * @id: buffer to read IDENTIFY data into
1845 *
1846 * Read ID data from the specified device. ATA_CMD_ID_ATA is
1847 * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI
1848 * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS
1849 * for pre-ATA4 drives.
1850 *
1851 * FIXME: ATA_CMD_ID_ATA is optional for early drives and right
1852 * now we abort if we hit that case.
1853 *
1854 * LOCKING:
1855 * Kernel thread context (may sleep)
1856 *
1857 * RETURNS:
1858 * 0 on success, -errno otherwise.
1859 */
1860int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
1861 unsigned int flags, u16 *id)
1862{
1863 struct ata_port *ap = dev->link->ap;
1864 unsigned int class = *p_class;
1865 struct ata_taskfile tf;
1866 unsigned int err_mask = 0;
1867 const char *reason;
1868 bool is_semb = class == ATA_DEV_SEMB;
1869 int may_fallback = 1, tried_spinup = 0;
1870 int rc;
1871
1872 if (ata_msg_ctl(ap))
1873 ata_dev_dbg(dev, "%s: ENTER\n", __func__);
1874
1875retry:
1876 ata_tf_init(dev, &tf);
1877
1878 switch (class) {
1879 case ATA_DEV_SEMB:
1880 class = ATA_DEV_ATA; /* some hard drives report SEMB sig */
1881 case ATA_DEV_ATA:
1882 tf.command = ATA_CMD_ID_ATA;
1883 break;
1884 case ATA_DEV_ATAPI:
1885 tf.command = ATA_CMD_ID_ATAPI;
1886 break;
1887 default:
1888 rc = -ENODEV;
1889 reason = "unsupported class";
1890 goto err_out;
1891 }
1892
1893 tf.protocol = ATA_PROT_PIO;
1894
1895 /* Some devices choke if TF registers contain garbage. Make
1896 * sure those are properly initialized.
1897 */
1898 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
1899
1900 /* Device presence detection is unreliable on some
1901 * controllers. Always poll IDENTIFY if available.
1902 */
1903 tf.flags |= ATA_TFLAG_POLLING;
1904
1905 if (ap->ops->read_id)
1906 err_mask = ap->ops->read_id(dev, &tf, id);
1907 else
1908 err_mask = ata_do_dev_read_id(dev, &tf, id);
1909
1910 if (err_mask) {
1911 if (err_mask & AC_ERR_NODEV_HINT) {
1912 ata_dev_dbg(dev, "NODEV after polling detection\n");
1913 return -ENOENT;
1914 }
1915
1916 if (is_semb) {
1917 ata_dev_info(dev,
1918 "IDENTIFY failed on device w/ SEMB sig, disabled\n");
1919 /* SEMB is not supported yet */
1920 *p_class = ATA_DEV_SEMB_UNSUP;
1921 return 0;
1922 }
1923
1924 if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
1925 /* Device or controller might have reported
1926 * the wrong device class. Give a shot at the
1927 * other IDENTIFY if the current one is
1928 * aborted by the device.
1929 */
1930 if (may_fallback) {
1931 may_fallback = 0;
1932
1933 if (class == ATA_DEV_ATA)
1934 class = ATA_DEV_ATAPI;
1935 else
1936 class = ATA_DEV_ATA;
1937 goto retry;
1938 }
1939
1940 /* Control reaches here iff the device aborted
1941 * both flavors of IDENTIFYs which happens
1942 * sometimes with phantom devices.
1943 */
1944 ata_dev_dbg(dev,
1945 "both IDENTIFYs aborted, assuming NODEV\n");
1946 return -ENOENT;
1947 }
1948
1949 rc = -EIO;
1950 reason = "I/O error";
1951 goto err_out;
1952 }
1953
1954 if (dev->horkage & ATA_HORKAGE_DUMP_ID) {
1955 ata_dev_dbg(dev, "dumping IDENTIFY data, "
1956 "class=%d may_fallback=%d tried_spinup=%d\n",
1957 class, may_fallback, tried_spinup);
1958 print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,
1959 16, 2, id, ATA_ID_WORDS * sizeof(*id), true);
1960 }
1961
1962 /* Falling back doesn't make sense if ID data was read
1963 * successfully at least once.
1964 */
1965 may_fallback = 0;
1966
1967 swap_buf_le16(id, ATA_ID_WORDS);
1968
1969 /* sanity check */
1970 rc = -EINVAL;
1971 reason = "device reports invalid type";
1972
1973 if (class == ATA_DEV_ATA) {
1974 if (!ata_id_is_ata(id) && !ata_id_is_cfa(id))
1975 goto err_out;
1976 if (ap->host->flags & ATA_HOST_IGNORE_ATA &&
1977 ata_id_is_ata(id)) {
1978 ata_dev_dbg(dev,
1979 "host indicates ignore ATA devices, ignored\n");
1980 return -ENOENT;
1981 }
1982 } else {
1983 if (ata_id_is_ata(id))
1984 goto err_out;
1985 }
1986
1987 if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) {
1988 tried_spinup = 1;
1989 /*
1990 * Drive powered-up in standby mode, and requires a specific
1991 * SET_FEATURES spin-up subcommand before it will accept
1992 * anything other than the original IDENTIFY command.
1993 */
1994 err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0);
1995 if (err_mask && id[2] != 0x738c) {
1996 rc = -EIO;
1997 reason = "SPINUP failed";
1998 goto err_out;
1999 }
2000 /*
2001 * If the drive initially returned incomplete IDENTIFY info,
2002 * we now must reissue the IDENTIFY command.
2003 */
2004 if (id[2] == 0x37c8)
2005 goto retry;
2006 }
2007
2008 if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) {
2009 /*
2010 * The exact sequence expected by certain pre-ATA4 drives is:
2011 * SRST RESET
2012 * IDENTIFY (optional in early ATA)
2013 * INITIALIZE DEVICE PARAMETERS (later IDE and ATA)
2014 * anything else..
2015 * Some drives were very specific about that exact sequence.
2016 *
2017 * Note that ATA4 says lba is mandatory so the second check
2018 * should never trigger.
2019 */
2020 if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
2021 err_mask = ata_dev_init_params(dev, id[3], id[6]);
2022 if (err_mask) {
2023 rc = -EIO;
2024 reason = "INIT_DEV_PARAMS failed";
2025 goto err_out;
2026 }
2027
2028 /* current CHS translation info (id[53-58]) might be
2029 * changed. reread the identify device info.
2030 */
2031 flags &= ~ATA_READID_POSTRESET;
2032 goto retry;
2033 }
2034 }
2035
2036 *p_class = class;
2037
2038 return 0;
2039
2040 err_out:
2041 if (ata_msg_warn(ap))
2042 ata_dev_warn(dev, "failed to IDENTIFY (%s, err_mask=0x%x)\n",
2043 reason, err_mask);
2044 return rc;
2045}
2046
2047static int ata_do_link_spd_horkage(struct ata_device *dev)
2048{
2049 struct ata_link *plink = ata_dev_phys_link(dev);
2050 u32 target, target_limit;
2051
2052 if (!sata_scr_valid(plink))
2053 return 0;
2054
2055 if (dev->horkage & ATA_HORKAGE_1_5_GBPS)
2056 target = 1;
2057 else
2058 return 0;
2059
2060 target_limit = (1 << target) - 1;
2061
2062 /* if already on stricter limit, no need to push further */
2063 if (plink->sata_spd_limit <= target_limit)
2064 return 0;
2065
2066 plink->sata_spd_limit = target_limit;
2067
2068 /* Request another EH round by returning -EAGAIN if link is
2069 * going faster than the target speed. Forward progress is
2070 * guaranteed by setting sata_spd_limit to target_limit above.
2071 */
2072 if (plink->sata_spd > target) {
2073 ata_dev_info(dev, "applying link speed limit horkage to %s\n",
2074 sata_spd_string(target));
2075 return -EAGAIN;
2076 }
2077 return 0;
2078}
2079
2080static inline u8 ata_dev_knobble(struct ata_device *dev)
2081{
2082 struct ata_port *ap = dev->link->ap;
2083
2084 if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK)
2085 return 0;
2086
2087 return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
2088}
2089
2090static int ata_dev_config_ncq(struct ata_device *dev,
2091 char *desc, size_t desc_sz)
2092{
2093 struct ata_port *ap = dev->link->ap;
2094 int hdepth = 0, ddepth = ata_id_queue_depth(dev->id);
2095 unsigned int err_mask;
2096 char *aa_desc = "";
2097
2098 if (!ata_id_has_ncq(dev->id)) {
2099 desc[0] = '\0';
2100 return 0;
2101 }
2102 if (dev->horkage & ATA_HORKAGE_NONCQ) {
2103 snprintf(desc, desc_sz, "NCQ (not used)");
2104 return 0;
2105 }
2106 if (ap->flags & ATA_FLAG_NCQ) {
2107 hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1);
2108 dev->flags |= ATA_DFLAG_NCQ;
2109 }
2110
2111 if (!(dev->horkage & ATA_HORKAGE_BROKEN_FPDMA_AA) &&
2112 (ap->flags & ATA_FLAG_FPDMA_AA) &&
2113 ata_id_has_fpdma_aa(dev->id)) {
2114 err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE,
2115 SATA_FPDMA_AA);
2116 if (err_mask) {
2117 ata_dev_err(dev,
2118 "failed to enable AA (error_mask=0x%x)\n",
2119 err_mask);
2120 if (err_mask != AC_ERR_DEV) {
2121 dev->horkage |= ATA_HORKAGE_BROKEN_FPDMA_AA;
2122 return -EIO;
2123 }
2124 } else
2125 aa_desc = ", AA";
2126 }
2127
2128 if (hdepth >= ddepth)
2129 snprintf(desc, desc_sz, "NCQ (depth %d)%s", ddepth, aa_desc);
2130 else
2131 snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
2132 ddepth, aa_desc);
2133 return 0;
2134}
2135
2136/**
2137 * ata_dev_configure - Configure the specified ATA/ATAPI device
2138 * @dev: Target device to configure
2139 *
2140 * Configure @dev according to @dev->id. Generic and low-level
2141 * driver specific fixups are also applied.
2142 *
2143 * LOCKING:
2144 * Kernel thread context (may sleep)
2145 *
2146 * RETURNS:
2147 * 0 on success, -errno otherwise
2148 */
2149int ata_dev_configure(struct ata_device *dev)
2150{
2151 struct ata_port *ap = dev->link->ap;
2152 struct ata_eh_context *ehc = &dev->link->eh_context;
2153 int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
2154 const u16 *id = dev->id;
2155 unsigned long xfer_mask;
2156 char revbuf[7]; /* XYZ-99\0 */
2157 char fwrevbuf[ATA_ID_FW_REV_LEN+1];
2158 char modelbuf[ATA_ID_PROD_LEN+1];
2159 int rc;
2160
2161 if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
2162 ata_dev_info(dev, "%s: ENTER/EXIT -- nodev\n", __func__);
2163 return 0;
2164 }
2165
2166 if (ata_msg_probe(ap))
2167 ata_dev_dbg(dev, "%s: ENTER\n", __func__);
2168
2169 /* set horkage */
2170 dev->horkage |= ata_dev_blacklisted(dev);
2171 ata_force_horkage(dev);
2172
2173 if (dev->horkage & ATA_HORKAGE_DISABLE) {
2174 ata_dev_info(dev, "unsupported device, disabling\n");
2175 ata_dev_disable(dev);
2176 return 0;
2177 }
2178
2179 if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) &&
2180 dev->class == ATA_DEV_ATAPI) {
2181 ata_dev_warn(dev, "WARNING: ATAPI is %s, device ignored\n",
2182 atapi_enabled ? "not supported with this driver"
2183 : "disabled");
2184 ata_dev_disable(dev);
2185 return 0;
2186 }
2187
2188 rc = ata_do_link_spd_horkage(dev);
2189 if (rc)
2190 return rc;
2191
2192 /* let ACPI work its magic */
2193 rc = ata_acpi_on_devcfg(dev);
2194 if (rc)
2195 return rc;
2196
2197 /* massage HPA, do it early as it might change IDENTIFY data */
2198 rc = ata_hpa_resize(dev);
2199 if (rc)
2200 return rc;
2201
2202 /* print device capabilities */
2203 if (ata_msg_probe(ap))
2204 ata_dev_dbg(dev,
2205 "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x "
2206 "85:%04x 86:%04x 87:%04x 88:%04x\n",
2207 __func__,
2208 id[49], id[82], id[83], id[84],
2209 id[85], id[86], id[87], id[88]);
2210
2211 /* initialize to-be-configured parameters */
2212 dev->flags &= ~ATA_DFLAG_CFG_MASK;
2213 dev->max_sectors = 0;
2214 dev->cdb_len = 0;
2215 dev->n_sectors = 0;
2216 dev->cylinders = 0;
2217 dev->heads = 0;
2218 dev->sectors = 0;
2219 dev->multi_count = 0;
2220
2221 /*
2222 * common ATA, ATAPI feature tests
2223 */
2224
2225 /* find max transfer mode; for printk only */
2226 xfer_mask = ata_id_xfermask(id);
2227
2228 if (ata_msg_probe(ap))
2229 ata_dump_id(id);
2230
2231 /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
2232 ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,
2233 sizeof(fwrevbuf));
2234
2235 ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD,
2236 sizeof(modelbuf));
2237
2238 /* ATA-specific feature tests */
2239 if (dev->class == ATA_DEV_ATA) {
2240 if (ata_id_is_cfa(id)) {
2241 /* CPRM may make this media unusable */
2242 if (id[ATA_ID_CFA_KEY_MGMT] & 1)
2243 ata_dev_warn(dev,
2244 "supports DRM functions and may not be fully accessible\n");
2245 snprintf(revbuf, 7, "CFA");
2246 } else {
2247 snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id));
2248 /* Warn the user if the device has TPM extensions */
2249 if (ata_id_has_tpm(id))
2250 ata_dev_warn(dev,
2251 "supports DRM functions and may not be fully accessible\n");
2252 }
2253
2254 dev->n_sectors = ata_id_n_sectors(id);
2255
2256 /* get current R/W Multiple count setting */
2257 if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) {
2258 unsigned int max = dev->id[47] & 0xff;
2259 unsigned int cnt = dev->id[59] & 0xff;
2260 /* only recognize/allow powers of two here */
2261 if (is_power_of_2(max) && is_power_of_2(cnt))
2262 if (cnt <= max)
2263 dev->multi_count = cnt;
2264 }
2265
2266 if (ata_id_has_lba(id)) {
2267 const char *lba_desc;
2268 char ncq_desc[24];
2269
2270 lba_desc = "LBA";
2271 dev->flags |= ATA_DFLAG_LBA;
2272 if (ata_id_has_lba48(id)) {
2273 dev->flags |= ATA_DFLAG_LBA48;
2274 lba_desc = "LBA48";
2275
2276 if (dev->n_sectors >= (1UL << 28) &&
2277 ata_id_has_flush_ext(id))
2278 dev->flags |= ATA_DFLAG_FLUSH_EXT;
2279 }
2280
2281 /* config NCQ */
2282 rc = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
2283 if (rc)
2284 return rc;
2285
2286 /* print device info to dmesg */
2287 if (ata_msg_drv(ap) && print_info) {
2288 ata_dev_info(dev, "%s: %s, %s, max %s\n",
2289 revbuf, modelbuf, fwrevbuf,
2290 ata_mode_string(xfer_mask));
2291 ata_dev_info(dev,
2292 "%llu sectors, multi %u: %s %s\n",
2293 (unsigned long long)dev->n_sectors,
2294 dev->multi_count, lba_desc, ncq_desc);
2295 }
2296 } else {
2297 /* CHS */
2298
2299 /* Default translation */
2300 dev->cylinders = id[1];
2301 dev->heads = id[3];
2302 dev->sectors = id[6];
2303
2304 if (ata_id_current_chs_valid(id)) {
2305 /* Current CHS translation is valid. */
2306 dev->cylinders = id[54];
2307 dev->heads = id[55];
2308 dev->sectors = id[56];
2309 }
2310
2311 /* print device info to dmesg */
2312 if (ata_msg_drv(ap) && print_info) {
2313 ata_dev_info(dev, "%s: %s, %s, max %s\n",
2314 revbuf, modelbuf, fwrevbuf,
2315 ata_mode_string(xfer_mask));
2316 ata_dev_info(dev,
2317 "%llu sectors, multi %u, CHS %u/%u/%u\n",
2318 (unsigned long long)dev->n_sectors,
2319 dev->multi_count, dev->cylinders,
2320 dev->heads, dev->sectors);
2321 }
2322 }
2323
2324 dev->cdb_len = 16;
2325 }
2326
2327 /* ATAPI-specific feature tests */
2328 else if (dev->class == ATA_DEV_ATAPI) {
2329 const char *cdb_intr_string = "";
2330 const char *atapi_an_string = "";
2331 const char *dma_dir_string = "";
2332 u32 sntf;
2333
2334 rc = atapi_cdb_len(id);
2335 if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
2336 if (ata_msg_warn(ap))
2337 ata_dev_warn(dev, "unsupported CDB len\n");
2338 rc = -EINVAL;
2339 goto err_out_nosup;
2340 }
2341 dev->cdb_len = (unsigned int) rc;
2342
2343 /* Enable ATAPI AN if both the host and device have
2344 * the support. If PMP is attached, SNTF is required
2345 * to enable ATAPI AN to discern between PHY status
2346 * changed notifications and ATAPI ANs.
2347 */
2348 if (atapi_an &&
2349 (ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
2350 (!sata_pmp_attached(ap) ||
2351 sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
2352 unsigned int err_mask;
2353
2354 /* issue SET feature command to turn this on */
2355 err_mask = ata_dev_set_feature(dev,
2356 SETFEATURES_SATA_ENABLE, SATA_AN);
2357 if (err_mask)
2358 ata_dev_err(dev,
2359 "failed to enable ATAPI AN (err_mask=0x%x)\n",
2360 err_mask);
2361 else {
2362 dev->flags |= ATA_DFLAG_AN;
2363 atapi_an_string = ", ATAPI AN";
2364 }
2365 }
2366
2367 if (ata_id_cdb_intr(dev->id)) {
2368 dev->flags |= ATA_DFLAG_CDB_INTR;
2369 cdb_intr_string = ", CDB intr";
2370 }
2371
2372 if (atapi_dmadir || atapi_id_dmadir(dev->id)) {
2373 dev->flags |= ATA_DFLAG_DMADIR;
2374 dma_dir_string = ", DMADIR";
2375 }
2376
2377 /* print device info to dmesg */
2378 if (ata_msg_drv(ap) && print_info)
2379 ata_dev_info(dev,
2380 "ATAPI: %s, %s, max %s%s%s%s\n",
2381 modelbuf, fwrevbuf,
2382 ata_mode_string(xfer_mask),
2383 cdb_intr_string, atapi_an_string,
2384 dma_dir_string);
2385 }
2386
2387 /* determine max_sectors */
2388 dev->max_sectors = ATA_MAX_SECTORS;
2389 if (dev->flags & ATA_DFLAG_LBA48)
2390 dev->max_sectors = ATA_MAX_SECTORS_LBA48;
2391
2392 /* Limit PATA drive on SATA cable bridge transfers to udma5,
2393 200 sectors */
2394 if (ata_dev_knobble(dev)) {
2395 if (ata_msg_drv(ap) && print_info)
2396 ata_dev_info(dev, "applying bridge limits\n");
2397 dev->udma_mask &= ATA_UDMA5;
2398 dev->max_sectors = ATA_MAX_SECTORS;
2399 }
2400
2401 if ((dev->class == ATA_DEV_ATAPI) &&
2402 (atapi_command_packet_set(id) == TYPE_TAPE)) {
2403 dev->max_sectors = ATA_MAX_SECTORS_TAPE;
2404 dev->horkage |= ATA_HORKAGE_STUCK_ERR;
2405 }
2406
2407 if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
2408 dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
2409 dev->max_sectors);
2410
2411 if (ap->ops->dev_config)
2412 ap->ops->dev_config(dev);
2413
2414 if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
2415 /* Let the user know. We don't want to disallow opens for
2416 rescue purposes, or in case the vendor is just a blithering
2417 idiot. Do this after the dev_config call as some controllers
2418 with buggy firmware may want to avoid reporting false device
2419 bugs */
2420
2421 if (print_info) {
2422 ata_dev_warn(dev,
2423"Drive reports diagnostics failure. This may indicate a drive\n");
2424 ata_dev_warn(dev,
2425"fault or invalid emulation. Contact drive vendor for information.\n");
2426 }
2427 }
2428
2429 if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
2430 ata_dev_warn(dev, "WARNING: device requires firmware update to be fully functional\n");
2431 ata_dev_warn(dev, " contact the vendor or visit http://ata.wiki.kernel.org\n");
2432 }
2433
2434 return 0;
2435
2436err_out_nosup:
2437 if (ata_msg_probe(ap))
2438 ata_dev_dbg(dev, "%s: EXIT, err\n", __func__);
2439 return rc;
2440}
2441
2442/**
2443 * ata_cable_40wire - return 40 wire cable type
2444 * @ap: port
2445 *
2446 * Helper method for drivers which want to hardwire 40 wire cable
2447 * detection.
2448 */
2449
2450int ata_cable_40wire(struct ata_port *ap)
2451{
2452 return ATA_CBL_PATA40;
2453}
2454
2455/**
2456 * ata_cable_80wire - return 80 wire cable type
2457 * @ap: port
2458 *
2459 * Helper method for drivers which want to hardwire 80 wire cable
2460 * detection.
2461 */
2462
2463int ata_cable_80wire(struct ata_port *ap)
2464{
2465 return ATA_CBL_PATA80;
2466}
2467
2468/**
2469 * ata_cable_unknown - return unknown PATA cable.
2470 * @ap: port
2471 *
2472 * Helper method for drivers which have no PATA cable detection.
2473 */
2474
2475int ata_cable_unknown(struct ata_port *ap)
2476{
2477 return ATA_CBL_PATA_UNK;
2478}
2479
2480/**
2481 * ata_cable_ignore - return ignored PATA cable.
2482 * @ap: port
2483 *
2484 * Helper method for drivers which don't use cable type to limit
2485 * transfer mode.
2486 */
2487int ata_cable_ignore(struct ata_port *ap)
2488{
2489 return ATA_CBL_PATA_IGN;
2490}
2491
2492/**
2493 * ata_cable_sata - return SATA cable type
2494 * @ap: port
2495 *
2496 * Helper method for drivers which have SATA cables
2497 */
2498
2499int ata_cable_sata(struct ata_port *ap)
2500{
2501 return ATA_CBL_SATA;
2502}
2503
2504/**
2505 * ata_bus_probe - Reset and probe ATA bus
2506 * @ap: Bus to probe
2507 *
2508 * Master ATA bus probing function. Initiates a hardware-dependent
2509 * bus reset, then attempts to identify any devices found on
2510 * the bus.
2511 *
2512 * LOCKING:
2513 * PCI/etc. bus probe sem.
2514 *
2515 * RETURNS:
2516 * Zero on success, negative errno otherwise.
2517 */
2518
2519int ata_bus_probe(struct ata_port *ap)
2520{
2521 unsigned int classes[ATA_MAX_DEVICES];
2522 int tries[ATA_MAX_DEVICES];
2523 int rc;
2524 struct ata_device *dev;
2525
2526 ata_for_each_dev(dev, &ap->link, ALL)
2527 tries[dev->devno] = ATA_PROBE_MAX_TRIES;
2528
2529 retry:
2530 ata_for_each_dev(dev, &ap->link, ALL) {
2531 /* If we issue an SRST then an ATA drive (not ATAPI)
2532 * may change configuration and be in PIO0 timing. If
2533 * we do a hard reset (or are coming from power on)
2534 * this is true for ATA or ATAPI. Until we've set a
2535 * suitable controller mode we should not touch the
2536 * bus as we may be talking too fast.
2537 */
2538 dev->pio_mode = XFER_PIO_0;
2539
2540 /* If the controller has a pio mode setup function
2541 * then use it to set the chipset to rights. Don't
2542 * touch the DMA setup as that will be dealt with when
2543 * configuring devices.
2544 */
2545 if (ap->ops->set_piomode)
2546 ap->ops->set_piomode(ap, dev);
2547 }
2548
2549 /* reset and determine device classes */
2550 ap->ops->phy_reset(ap);
2551
2552 ata_for_each_dev(dev, &ap->link, ALL) {
2553 if (dev->class != ATA_DEV_UNKNOWN)
2554 classes[dev->devno] = dev->class;
2555 else
2556 classes[dev->devno] = ATA_DEV_NONE;
2557
2558 dev->class = ATA_DEV_UNKNOWN;
2559 }
2560
2561 /* read IDENTIFY page and configure devices. We have to do the identify
2562 specific sequence bass-ackwards so that PDIAG- is released by
2563 the slave device */
2564
2565 ata_for_each_dev(dev, &ap->link, ALL_REVERSE) {
2566 if (tries[dev->devno])
2567 dev->class = classes[dev->devno];
2568
2569 if (!ata_dev_enabled(dev))
2570 continue;
2571
2572 rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET,
2573 dev->id);
2574 if (rc)
2575 goto fail;
2576 }
2577
2578 /* Now ask for the cable type as PDIAG- should have been released */
2579 if (ap->ops->cable_detect)
2580 ap->cbl = ap->ops->cable_detect(ap);
2581
2582 /* We may have SATA bridge glue hiding here irrespective of
2583 * the reported cable types and sensed types. When SATA
2584 * drives indicate we have a bridge, we don't know which end
2585 * of the link the bridge is which is a problem.
2586 */
2587 ata_for_each_dev(dev, &ap->link, ENABLED)
2588 if (ata_id_is_sata(dev->id))
2589 ap->cbl = ATA_CBL_SATA;
2590
2591 /* After the identify sequence we can now set up the devices. We do
2592 this in the normal order so that the user doesn't get confused */
2593
2594 ata_for_each_dev(dev, &ap->link, ENABLED) {
2595 ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO;
2596 rc = ata_dev_configure(dev);
2597 ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO;
2598 if (rc)
2599 goto fail;
2600 }
2601
2602 /* configure transfer mode */
2603 rc = ata_set_mode(&ap->link, &dev);
2604 if (rc)
2605 goto fail;
2606
2607 ata_for_each_dev(dev, &ap->link, ENABLED)
2608 return 0;
2609
2610 return -ENODEV;
2611
2612 fail:
2613 tries[dev->devno]--;
2614
2615 switch (rc) {
2616 case -EINVAL:
2617 /* eeek, something went very wrong, give up */
2618 tries[dev->devno] = 0;
2619 break;
2620
2621 case -ENODEV:
2622 /* give it just one more chance */
2623 tries[dev->devno] = min(tries[dev->devno], 1);
2624 case -EIO:
2625 if (tries[dev->devno] == 1) {
2626 /* This is the last chance, better to slow
2627 * down than lose it.
2628 */
2629 sata_down_spd_limit(&ap->link, 0);
2630 ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
2631 }
2632 }
2633
2634 if (!tries[dev->devno])
2635 ata_dev_disable(dev);
2636
2637 goto retry;
2638}
2639
2640/**
2641 * sata_print_link_status - Print SATA link status
2642 * @link: SATA link to printk link status about
2643 *
2644 * This function prints link speed and status of a SATA link.
2645 *
2646 * LOCKING:
2647 * None.
2648 */
2649static void sata_print_link_status(struct ata_link *link)
2650{
2651 u32 sstatus, scontrol, tmp;
2652
2653 if (sata_scr_read(link, SCR_STATUS, &sstatus))
2654 return;
2655 sata_scr_read(link, SCR_CONTROL, &scontrol);
2656
2657 if (ata_phys_link_online(link)) {
2658 tmp = (sstatus >> 4) & 0xf;
2659 ata_link_info(link, "SATA link up %s (SStatus %X SControl %X)\n",
2660 sata_spd_string(tmp), sstatus, scontrol);
2661 } else {
2662 ata_link_info(link, "SATA link down (SStatus %X SControl %X)\n",
2663 sstatus, scontrol);
2664 }
2665}
2666
2667/**
2668 * ata_dev_pair - return other device on cable
2669 * @adev: device
2670 *
2671 * Obtain the other device on the same cable, or if none is
2672 * present NULL is returned
2673 */
2674
2675struct ata_device *ata_dev_pair(struct ata_device *adev)
2676{
2677 struct ata_link *link = adev->link;
2678 struct ata_device *pair = &link->device[1 - adev->devno];
2679 if (!ata_dev_enabled(pair))
2680 return NULL;
2681 return pair;
2682}
2683
2684/**
2685 * sata_down_spd_limit - adjust SATA spd limit downward
2686 * @link: Link to adjust SATA spd limit for
2687 * @spd_limit: Additional limit
2688 *
2689 * Adjust SATA spd limit of @link downward. Note that this
2690 * function only adjusts the limit. The change must be applied
2691 * using sata_set_spd().
2692 *
2693 * If @spd_limit is non-zero, the speed is limited to equal to or
2694 * lower than @spd_limit if such speed is supported. If
2695 * @spd_limit is slower than any supported speed, only the lowest
2696 * supported speed is allowed.
2697 *
2698 * LOCKING:
2699 * Inherited from caller.
2700 *
2701 * RETURNS:
2702 * 0 on success, negative errno on failure
2703 */
2704int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
2705{
2706 u32 sstatus, spd, mask;
2707 int rc, bit;
2708
2709 if (!sata_scr_valid(link))
2710 return -EOPNOTSUPP;
2711
2712 /* If SCR can be read, use it to determine the current SPD.
2713 * If not, use cached value in link->sata_spd.
2714 */
2715 rc = sata_scr_read(link, SCR_STATUS, &sstatus);
2716 if (rc == 0 && ata_sstatus_online(sstatus))
2717 spd = (sstatus >> 4) & 0xf;
2718 else
2719 spd = link->sata_spd;
2720
2721 mask = link->sata_spd_limit;
2722 if (mask <= 1)
2723 return -EINVAL;
2724
2725 /* unconditionally mask off the highest bit */
2726 bit = fls(mask) - 1;
2727 mask &= ~(1 << bit);
2728
2729 /* Mask off all speeds higher than or equal to the current
2730 * one. Force 1.5Gbps if current SPD is not available.
2731 */
2732 if (spd > 1)
2733 mask &= (1 << (spd - 1)) - 1;
2734 else
2735 mask &= 1;
2736
2737 /* were we already at the bottom? */
2738 if (!mask)
2739 return -EINVAL;
2740
2741 if (spd_limit) {
2742 if (mask & ((1 << spd_limit) - 1))
2743 mask &= (1 << spd_limit) - 1;
2744 else {
2745 bit = ffs(mask) - 1;
2746 mask = 1 << bit;
2747 }
2748 }
2749
2750 link->sata_spd_limit = mask;
2751
2752 ata_link_warn(link, "limiting SATA link speed to %s\n",
2753 sata_spd_string(fls(mask)));
2754
2755 return 0;
2756}
2757
2758static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
2759{
2760 struct ata_link *host_link = &link->ap->link;
2761 u32 limit, target, spd;
2762
2763 limit = link->sata_spd_limit;
2764
2765 /* Don't configure downstream link faster than upstream link.
2766 * It doesn't speed up anything and some PMPs choke on such
2767 * configuration.
2768 */
2769 if (!ata_is_host_link(link) && host_link->sata_spd)
2770 limit &= (1 << host_link->sata_spd) - 1;
2771
2772 if (limit == UINT_MAX)
2773 target = 0;
2774 else
2775 target = fls(limit);
2776
2777 spd = (*scontrol >> 4) & 0xf;
2778 *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4);
2779
2780 return spd != target;
2781}
2782
2783/**
2784 * sata_set_spd_needed - is SATA spd configuration needed
2785 * @link: Link in question
2786 *
2787 * Test whether the spd limit in SControl matches
2788 * @link->sata_spd_limit. This function is used to determine
2789 * whether hardreset is necessary to apply SATA spd
2790 * configuration.
2791 *
2792 * LOCKING:
2793 * Inherited from caller.
2794 *
2795 * RETURNS:
2796 * 1 if SATA spd configuration is needed, 0 otherwise.
2797 */
2798static int sata_set_spd_needed(struct ata_link *link)
2799{
2800 u32 scontrol;
2801
2802 if (sata_scr_read(link, SCR_CONTROL, &scontrol))
2803 return 1;
2804
2805 return __sata_set_spd_needed(link, &scontrol);
2806}
2807
2808/**
2809 * sata_set_spd - set SATA spd according to spd limit
2810 * @link: Link to set SATA spd for
2811 *
2812 * Set SATA spd of @link according to sata_spd_limit.
2813 *
2814 * LOCKING:
2815 * Inherited from caller.
2816 *
2817 * RETURNS:
2818 * 0 if spd doesn't need to be changed, 1 if spd has been
2819 * changed. Negative errno if SCR registers are inaccessible.
2820 */
2821int sata_set_spd(struct ata_link *link)
2822{
2823 u32 scontrol;
2824 int rc;
2825
2826 if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
2827 return rc;
2828
2829 if (!__sata_set_spd_needed(link, &scontrol))
2830 return 0;
2831
2832 if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
2833 return rc;
2834
2835 return 1;
2836}
2837
2838/*
2839 * This mode timing computation functionality is ported over from
2840 * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
2841 */
2842/*
2843 * PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
2844 * These were taken from ATA/ATAPI-6 standard, rev 0a, except
2845 * for UDMA6, which is currently supported only by Maxtor drives.
2846 *
2847 * For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0.
2848 */
2849
2850static const struct ata_timing ata_timing[] = {
2851/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0, 960, 0 }, */
2852 { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 0, 600, 0 },
2853 { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 0, 383, 0 },
2854 { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 0, 240, 0 },
2855 { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 0, 180, 0 },
2856 { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 0, 120, 0 },
2857 { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 0, 100, 0 },
2858 { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 0, 80, 0 },
2859
2860 { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 50, 960, 0 },
2861 { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 30, 480, 0 },
2862 { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 20, 240, 0 },
2863
2864 { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 20, 480, 0 },
2865 { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 5, 150, 0 },
2866 { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 5, 120, 0 },
2867 { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 5, 100, 0 },
2868 { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 5, 80, 0 },
2869
2870/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 0, 150 }, */
2871 { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 0, 120 },
2872 { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 0, 80 },
2873 { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 0, 60 },
2874 { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 0, 45 },
2875 { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 0, 30 },
2876 { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 0, 20 },
2877 { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 0, 15 },
2878
2879 { 0xFF }
2880};
2881
2882#define ENOUGH(v, unit) (((v)-1)/(unit)+1)
2883#define EZ(v, unit) ((v)?ENOUGH(v, unit):0)
2884
2885static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
2886{
2887 q->setup = EZ(t->setup * 1000, T);
2888 q->act8b = EZ(t->act8b * 1000, T);
2889 q->rec8b = EZ(t->rec8b * 1000, T);
2890 q->cyc8b = EZ(t->cyc8b * 1000, T);
2891 q->active = EZ(t->active * 1000, T);
2892 q->recover = EZ(t->recover * 1000, T);
2893 q->dmack_hold = EZ(t->dmack_hold * 1000, T);
2894 q->cycle = EZ(t->cycle * 1000, T);
2895 q->udma = EZ(t->udma * 1000, UT);
2896}
2897
2898void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
2899 struct ata_timing *m, unsigned int what)
2900{
2901 if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup);
2902 if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b);
2903 if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b);
2904 if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b);
2905 if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active);
2906 if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
2907 if (what & ATA_TIMING_DMACK_HOLD) m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
2908 if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle);
2909 if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
2910}
2911
2912const struct ata_timing *ata_timing_find_mode(u8 xfer_mode)
2913{
2914 const struct ata_timing *t = ata_timing;
2915
2916 while (xfer_mode > t->mode)
2917 t++;
2918
2919 if (xfer_mode == t->mode)
2920 return t;
2921 return NULL;
2922}
2923
2924int ata_timing_compute(struct ata_device *adev, unsigned short speed,
2925 struct ata_timing *t, int T, int UT)
2926{
2927 const u16 *id = adev->id;
2928 const struct ata_timing *s;
2929 struct ata_timing p;
2930
2931 /*
2932 * Find the mode.
2933 */
2934
2935 if (!(s = ata_timing_find_mode(speed)))
2936 return -EINVAL;
2937
2938 memcpy(t, s, sizeof(*s));
2939
2940 /*
2941 * If the drive is an EIDE drive, it can tell us it needs extended
2942 * PIO/MW_DMA cycle timing.
2943 */
2944
2945 if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
2946 memset(&p, 0, sizeof(p));
2947
2948 if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) {
2949 if (speed <= XFER_PIO_2)
2950 p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
2951 else if ((speed <= XFER_PIO_4) ||
2952 (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
2953 p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
2954 } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
2955 p.cycle = id[ATA_ID_EIDE_DMA_MIN];
2956
2957 ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
2958 }
2959
2960 /*
2961 * Convert the timing to bus clock counts.
2962 */
2963
2964 ata_timing_quantize(t, t, T, UT);
2965
2966 /*
2967 * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
2968 * S.M.A.R.T * and some other commands. We have to ensure that the
2969 * DMA cycle timing is slower/equal than the fastest PIO timing.
2970 */
2971
2972 if (speed > XFER_PIO_6) {
2973 ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
2974 ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
2975 }
2976
2977 /*
2978 * Lengthen active & recovery time so that cycle time is correct.
2979 */
2980
2981 if (t->act8b + t->rec8b < t->cyc8b) {
2982 t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
2983 t->rec8b = t->cyc8b - t->act8b;
2984 }
2985
2986 if (t->active + t->recover < t->cycle) {
2987 t->active += (t->cycle - (t->active + t->recover)) / 2;
2988 t->recover = t->cycle - t->active;
2989 }
2990
2991 /* In a few cases quantisation may produce enough errors to
2992 leave t->cycle too low for the sum of active and recovery
2993 if so we must correct this */
2994 if (t->active + t->recover > t->cycle)
2995 t->cycle = t->active + t->recover;
2996
2997 return 0;
2998}
2999
3000/**
3001 * ata_timing_cycle2mode - find xfer mode for the specified cycle duration
3002 * @xfer_shift: ATA_SHIFT_* value for transfer type to examine.
3003 * @cycle: cycle duration in ns
3004 *
3005 * Return matching xfer mode for @cycle. The returned mode is of
3006 * the transfer type specified by @xfer_shift. If @cycle is too
3007 * slow for @xfer_shift, 0xff is returned. If @cycle is faster
3008 * than the fastest known mode, the fasted mode is returned.
3009 *
3010 * LOCKING:
3011 * None.
3012 *
3013 * RETURNS:
3014 * Matching xfer_mode, 0xff if no match found.
3015 */
3016u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle)
3017{
3018 u8 base_mode = 0xff, last_mode = 0xff;
3019 const struct ata_xfer_ent *ent;
3020 const struct ata_timing *t;
3021
3022 for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
3023 if (ent->shift == xfer_shift)
3024 base_mode = ent->base;
3025
3026 for (t = ata_timing_find_mode(base_mode);
3027 t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) {
3028 unsigned short this_cycle;
3029
3030 switch (xfer_shift) {
3031 case ATA_SHIFT_PIO:
3032 case ATA_SHIFT_MWDMA:
3033 this_cycle = t->cycle;
3034 break;
3035 case ATA_SHIFT_UDMA:
3036 this_cycle = t->udma;
3037 break;
3038 default:
3039 return 0xff;
3040 }
3041
3042 if (cycle > this_cycle)
3043 break;
3044
3045 last_mode = t->mode;
3046 }
3047
3048 return last_mode;
3049}
3050
3051/**
3052 * ata_down_xfermask_limit - adjust dev xfer masks downward
3053 * @dev: Device to adjust xfer masks
3054 * @sel: ATA_DNXFER_* selector
3055 *
3056 * Adjust xfer masks of @dev downward. Note that this function
3057 * does not apply the change. Invoking ata_set_mode() afterwards
3058 * will apply the limit.
3059 *
3060 * LOCKING:
3061 * Inherited from caller.
3062 *
3063 * RETURNS:
3064 * 0 on success, negative errno on failure
3065 */
3066int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
3067{
3068 char buf[32];
3069 unsigned long orig_mask, xfer_mask;
3070 unsigned long pio_mask, mwdma_mask, udma_mask;
3071 int quiet, highbit;
3072
3073 quiet = !!(sel & ATA_DNXFER_QUIET);
3074 sel &= ~ATA_DNXFER_QUIET;
3075
3076 xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask,
3077 dev->mwdma_mask,
3078 dev->udma_mask);
3079 ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask);
3080
3081 switch (sel) {
3082 case ATA_DNXFER_PIO:
3083 highbit = fls(pio_mask) - 1;
3084 pio_mask &= ~(1 << highbit);
3085 break;
3086
3087 case ATA_DNXFER_DMA:
3088 if (udma_mask) {
3089 highbit = fls(udma_mask) - 1;
3090 udma_mask &= ~(1 << highbit);
3091 if (!udma_mask)
3092 return -ENOENT;
3093 } else if (mwdma_mask) {
3094 highbit = fls(mwdma_mask) - 1;
3095 mwdma_mask &= ~(1 << highbit);
3096 if (!mwdma_mask)
3097 return -ENOENT;
3098 }
3099 break;
3100
3101 case ATA_DNXFER_40C:
3102 udma_mask &= ATA_UDMA_MASK_40C;
3103 break;
3104
3105 case ATA_DNXFER_FORCE_PIO0:
3106 pio_mask &= 1;
3107 case ATA_DNXFER_FORCE_PIO:
3108 mwdma_mask = 0;
3109 udma_mask = 0;
3110 break;
3111
3112 default:
3113 BUG();
3114 }
3115
3116 xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
3117
3118 if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask)
3119 return -ENOENT;
3120
3121 if (!quiet) {
3122 if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
3123 snprintf(buf, sizeof(buf), "%s:%s",
3124 ata_mode_string(xfer_mask),
3125 ata_mode_string(xfer_mask & ATA_MASK_PIO));
3126 else
3127 snprintf(buf, sizeof(buf), "%s",
3128 ata_mode_string(xfer_mask));
3129
3130 ata_dev_warn(dev, "limiting speed to %s\n", buf);
3131 }
3132
3133 ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
3134 &dev->udma_mask);
3135
3136 return 0;
3137}
3138
3139static int ata_dev_set_mode(struct ata_device *dev)
3140{
3141 struct ata_port *ap = dev->link->ap;
3142 struct ata_eh_context *ehc = &dev->link->eh_context;
3143 const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER;
3144 const char *dev_err_whine = "";
3145 int ign_dev_err = 0;
3146 unsigned int err_mask = 0;
3147 int rc;
3148
3149 dev->flags &= ~ATA_DFLAG_PIO;
3150 if (dev->xfer_shift == ATA_SHIFT_PIO)
3151 dev->flags |= ATA_DFLAG_PIO;
3152
3153 if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id))
3154 dev_err_whine = " (SET_XFERMODE skipped)";
3155 else {
3156 if (nosetxfer)
3157 ata_dev_warn(dev,
3158 "NOSETXFER but PATA detected - can't "
3159 "skip SETXFER, might malfunction\n");
3160 err_mask = ata_dev_set_xfermode(dev);
3161 }
3162
3163 if (err_mask & ~AC_ERR_DEV)
3164 goto fail;
3165
3166 /* revalidate */
3167 ehc->i.flags |= ATA_EHI_POST_SETMODE;
3168 rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0);
3169 ehc->i.flags &= ~ATA_EHI_POST_SETMODE;
3170 if (rc)
3171 return rc;
3172
3173 if (dev->xfer_shift == ATA_SHIFT_PIO) {
3174 /* Old CFA may refuse this command, which is just fine */
3175 if (ata_id_is_cfa(dev->id))
3176 ign_dev_err = 1;
3177 /* Catch several broken garbage emulations plus some pre
3178 ATA devices */
3179 if (ata_id_major_version(dev->id) == 0 &&
3180 dev->pio_mode <= XFER_PIO_2)
3181 ign_dev_err = 1;
3182 /* Some very old devices and some bad newer ones fail
3183 any kind of SET_XFERMODE request but support PIO0-2
3184 timings and no IORDY */
3185 if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2)
3186 ign_dev_err = 1;
3187 }
3188 /* Early MWDMA devices do DMA but don't allow DMA mode setting.
3189 Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */
3190 if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
3191 dev->dma_mode == XFER_MW_DMA_0 &&
3192 (dev->id[63] >> 8) & 1)
3193 ign_dev_err = 1;
3194
3195 /* if the device is actually configured correctly, ignore dev err */
3196 if (dev->xfer_mode == ata_xfer_mask2mode(ata_id_xfermask(dev->id)))
3197 ign_dev_err = 1;
3198
3199 if (err_mask & AC_ERR_DEV) {
3200 if (!ign_dev_err)
3201 goto fail;
3202 else
3203 dev_err_whine = " (device error ignored)";
3204 }
3205
3206 DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n",
3207 dev->xfer_shift, (int)dev->xfer_mode);
3208
3209 ata_dev_info(dev, "configured for %s%s\n",
3210 ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)),
3211 dev_err_whine);
3212
3213 return 0;
3214
3215 fail:
3216 ata_dev_err(dev, "failed to set xfermode (err_mask=0x%x)\n", err_mask);
3217 return -EIO;
3218}
3219
3220/**
3221 * ata_do_set_mode - Program timings and issue SET FEATURES - XFER
3222 * @link: link on which timings will be programmed
3223 * @r_failed_dev: out parameter for failed device
3224 *
3225 * Standard implementation of the function used to tune and set
3226 * ATA device disk transfer mode (PIO3, UDMA6, etc.). If
3227 * ata_dev_set_mode() fails, pointer to the failing device is
3228 * returned in @r_failed_dev.
3229 *
3230 * LOCKING:
3231 * PCI/etc. bus probe sem.
3232 *
3233 * RETURNS:
3234 * 0 on success, negative errno otherwise
3235 */
3236
3237int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
3238{
3239 struct ata_port *ap = link->ap;
3240 struct ata_device *dev;
3241 int rc = 0, used_dma = 0, found = 0;
3242
3243 /* step 1: calculate xfer_mask */
3244 ata_for_each_dev(dev, link, ENABLED) {
3245 unsigned long pio_mask, dma_mask;
3246 unsigned int mode_mask;
3247
3248 mode_mask = ATA_DMA_MASK_ATA;
3249 if (dev->class == ATA_DEV_ATAPI)
3250 mode_mask = ATA_DMA_MASK_ATAPI;
3251 else if (ata_id_is_cfa(dev->id))
3252 mode_mask = ATA_DMA_MASK_CFA;
3253
3254 ata_dev_xfermask(dev);
3255 ata_force_xfermask(dev);
3256
3257 pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0);
3258
3259 if (libata_dma_mask & mode_mask)
3260 dma_mask = ata_pack_xfermask(0, dev->mwdma_mask,
3261 dev->udma_mask);
3262 else
3263 dma_mask = 0;
3264
3265 dev->pio_mode = ata_xfer_mask2mode(pio_mask);
3266 dev->dma_mode = ata_xfer_mask2mode(dma_mask);
3267
3268 found = 1;
3269 if (ata_dma_enabled(dev))
3270 used_dma = 1;
3271 }
3272 if (!found)
3273 goto out;
3274
3275 /* step 2: always set host PIO timings */
3276 ata_for_each_dev(dev, link, ENABLED) {
3277 if (dev->pio_mode == 0xff) {
3278 ata_dev_warn(dev, "no PIO support\n");
3279 rc = -EINVAL;
3280 goto out;
3281 }
3282
3283 dev->xfer_mode = dev->pio_mode;
3284 dev->xfer_shift = ATA_SHIFT_PIO;
3285 if (ap->ops->set_piomode)
3286 ap->ops->set_piomode(ap, dev);
3287 }
3288
3289 /* step 3: set host DMA timings */
3290 ata_for_each_dev(dev, link, ENABLED) {
3291 if (!ata_dma_enabled(dev))
3292 continue;
3293
3294 dev->xfer_mode = dev->dma_mode;
3295 dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode);
3296 if (ap->ops->set_dmamode)
3297 ap->ops->set_dmamode(ap, dev);
3298 }
3299
3300 /* step 4: update devices' xfer mode */
3301 ata_for_each_dev(dev, link, ENABLED) {
3302 rc = ata_dev_set_mode(dev);
3303 if (rc)
3304 goto out;
3305 }
3306
3307 /* Record simplex status. If we selected DMA then the other
3308 * host channels are not permitted to do so.
3309 */
3310 if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX))
3311 ap->host->simplex_claimed = ap;
3312
3313 out:
3314 if (rc)
3315 *r_failed_dev = dev;
3316 return rc;
3317}
3318
3319/**
3320 * ata_wait_ready - wait for link to become ready
3321 * @link: link to be waited on
3322 * @deadline: deadline jiffies for the operation
3323 * @check_ready: callback to check link readiness
3324 *
3325 * Wait for @link to become ready. @check_ready should return
3326 * positive number if @link is ready, 0 if it isn't, -ENODEV if
3327 * link doesn't seem to be occupied, other errno for other error
3328 * conditions.
3329 *
3330 * Transient -ENODEV conditions are allowed for
3331 * ATA_TMOUT_FF_WAIT.
3332 *
3333 * LOCKING:
3334 * EH context.
3335 *
3336 * RETURNS:
3337 * 0 if @linke is ready before @deadline; otherwise, -errno.
3338 */
3339int ata_wait_ready(struct ata_link *link, unsigned long deadline,
3340 int (*check_ready)(struct ata_link *link))
3341{
3342 unsigned long start = jiffies;
3343 unsigned long nodev_deadline;
3344 int warned = 0;
3345
3346 /* choose which 0xff timeout to use, read comment in libata.h */
3347 if (link->ap->host->flags & ATA_HOST_PARALLEL_SCAN)
3348 nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT_LONG);
3349 else
3350 nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
3351
3352 /* Slave readiness can't be tested separately from master. On
3353 * M/S emulation configuration, this function should be called
3354 * only on the master and it will handle both master and slave.
3355 */
3356 WARN_ON(link == link->ap->slave_link);
3357
3358 if (time_after(nodev_deadline, deadline))
3359 nodev_deadline = deadline;
3360
3361 while (1) {
3362 unsigned long now = jiffies;
3363 int ready, tmp;
3364
3365 ready = tmp = check_ready(link);
3366 if (ready > 0)
3367 return 0;
3368
3369 /*
3370 * -ENODEV could be transient. Ignore -ENODEV if link
3371 * is online. Also, some SATA devices take a long
3372 * time to clear 0xff after reset. Wait for
3373 * ATA_TMOUT_FF_WAIT[_LONG] on -ENODEV if link isn't
3374 * offline.
3375 *
3376 * Note that some PATA controllers (pata_ali) explode
3377 * if status register is read more than once when
3378 * there's no device attached.
3379 */
3380 if (ready == -ENODEV) {
3381 if (ata_link_online(link))
3382 ready = 0;
3383 else if ((link->ap->flags & ATA_FLAG_SATA) &&
3384 !ata_link_offline(link) &&
3385 time_before(now, nodev_deadline))
3386 ready = 0;
3387 }
3388
3389 if (ready)
3390 return ready;
3391 if (time_after(now, deadline))
3392 return -EBUSY;
3393
3394 if (!warned && time_after(now, start + 5 * HZ) &&
3395 (deadline - now > 3 * HZ)) {
3396 ata_link_warn(link,
3397 "link is slow to respond, please be patient "
3398 "(ready=%d)\n", tmp);
3399 warned = 1;
3400 }
3401
3402 ata_msleep(link->ap, 50);
3403 }
3404}
3405
3406/**
3407 * ata_wait_after_reset - wait for link to become ready after reset
3408 * @link: link to be waited on
3409 * @deadline: deadline jiffies for the operation
3410 * @check_ready: callback to check link readiness
3411 *
3412 * Wait for @link to become ready after reset.
3413 *
3414 * LOCKING:
3415 * EH context.
3416 *
3417 * RETURNS:
3418 * 0 if @linke is ready before @deadline; otherwise, -errno.
3419 */
3420int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
3421 int (*check_ready)(struct ata_link *link))
3422{
3423 ata_msleep(link->ap, ATA_WAIT_AFTER_RESET);
3424
3425 return ata_wait_ready(link, deadline, check_ready);
3426}
3427
3428/**
3429 * sata_link_debounce - debounce SATA phy status
3430 * @link: ATA link to debounce SATA phy status for
3431 * @params: timing parameters { interval, duratinon, timeout } in msec
3432 * @deadline: deadline jiffies for the operation
3433 *
3434 * Make sure SStatus of @link reaches stable state, determined by
3435 * holding the same value where DET is not 1 for @duration polled
3436 * every @interval, before @timeout. Timeout constraints the
3437 * beginning of the stable state. Because DET gets stuck at 1 on
3438 * some controllers after hot unplugging, this functions waits
3439 * until timeout then returns 0 if DET is stable at 1.
3440 *
3441 * @timeout is further limited by @deadline. The sooner of the
3442 * two is used.
3443 *
3444 * LOCKING:
3445 * Kernel thread context (may sleep)
3446 *
3447 * RETURNS:
3448 * 0 on success, -errno on failure.
3449 */
3450int sata_link_debounce(struct ata_link *link, const unsigned long *params,
3451 unsigned long deadline)
3452{
3453 unsigned long interval = params[0];
3454 unsigned long duration = params[1];
3455 unsigned long last_jiffies, t;
3456 u32 last, cur;
3457 int rc;
3458
3459 t = ata_deadline(jiffies, params[2]);
3460 if (time_before(t, deadline))
3461 deadline = t;
3462
3463 if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
3464 return rc;
3465 cur &= 0xf;
3466
3467 last = cur;
3468 last_jiffies = jiffies;
3469
3470 while (1) {
3471 ata_msleep(link->ap, interval);
3472 if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
3473 return rc;
3474 cur &= 0xf;
3475
3476 /* DET stable? */
3477 if (cur == last) {
3478 if (cur == 1 && time_before(jiffies, deadline))
3479 continue;
3480 if (time_after(jiffies,
3481 ata_deadline(last_jiffies, duration)))
3482 return 0;
3483 continue;
3484 }
3485
3486 /* unstable, start over */
3487 last = cur;
3488 last_jiffies = jiffies;
3489
3490 /* Check deadline. If debouncing failed, return
3491 * -EPIPE to tell upper layer to lower link speed.
3492 */
3493 if (time_after(jiffies, deadline))
3494 return -EPIPE;
3495 }
3496}
3497
3498/**
3499 * sata_link_resume - resume SATA link
3500 * @link: ATA link to resume SATA
3501 * @params: timing parameters { interval, duratinon, timeout } in msec
3502 * @deadline: deadline jiffies for the operation
3503 *
3504 * Resume SATA phy @link and debounce it.
3505 *
3506 * LOCKING:
3507 * Kernel thread context (may sleep)
3508 *
3509 * RETURNS:
3510 * 0 on success, -errno on failure.
3511 */
3512int sata_link_resume(struct ata_link *link, const unsigned long *params,
3513 unsigned long deadline)
3514{
3515 int tries = ATA_LINK_RESUME_TRIES;
3516 u32 scontrol, serror;
3517 int rc;
3518
3519 if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
3520 return rc;
3521
3522 /*
3523 * Writes to SControl sometimes get ignored under certain
3524 * controllers (ata_piix SIDPR). Make sure DET actually is
3525 * cleared.
3526 */
3527 do {
3528 scontrol = (scontrol & 0x0f0) | 0x300;
3529 if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
3530 return rc;
3531 /*
3532 * Some PHYs react badly if SStatus is pounded
3533 * immediately after resuming. Delay 200ms before
3534 * debouncing.
3535 */
3536 ata_msleep(link->ap, 200);
3537
3538 /* is SControl restored correctly? */
3539 if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
3540 return rc;
3541 } while ((scontrol & 0xf0f) != 0x300 && --tries);
3542
3543 if ((scontrol & 0xf0f) != 0x300) {
3544 ata_link_warn(link, "failed to resume link (SControl %X)\n",
3545 scontrol);
3546 return 0;
3547 }
3548
3549 if (tries < ATA_LINK_RESUME_TRIES)
3550 ata_link_warn(link, "link resume succeeded after %d retries\n",
3551 ATA_LINK_RESUME_TRIES - tries);
3552
3553 if ((rc = sata_link_debounce(link, params, deadline)))
3554 return rc;
3555
3556 /* clear SError, some PHYs require this even for SRST to work */
3557 if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
3558 rc = sata_scr_write(link, SCR_ERROR, serror);
3559
3560 return rc != -EINVAL ? rc : 0;
3561}
3562
3563/**
3564 * sata_link_scr_lpm - manipulate SControl IPM and SPM fields
3565 * @link: ATA link to manipulate SControl for
3566 * @policy: LPM policy to configure
3567 * @spm_wakeup: initiate LPM transition to active state
3568 *
3569 * Manipulate the IPM field of the SControl register of @link
3570 * according to @policy. If @policy is ATA_LPM_MAX_POWER and
3571 * @spm_wakeup is %true, the SPM field is manipulated to wake up
3572 * the link. This function also clears PHYRDY_CHG before
3573 * returning.
3574 *
3575 * LOCKING:
3576 * EH context.
3577 *
3578 * RETURNS:
3579 * 0 on succes, -errno otherwise.
3580 */
3581int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
3582 bool spm_wakeup)
3583{
3584 struct ata_eh_context *ehc = &link->eh_context;
3585 bool woken_up = false;
3586 u32 scontrol;
3587 int rc;
3588
3589 rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
3590 if (rc)
3591 return rc;
3592
3593 switch (policy) {
3594 case ATA_LPM_MAX_POWER:
3595 /* disable all LPM transitions */
3596 scontrol |= (0x3 << 8);
3597 /* initiate transition to active state */
3598 if (spm_wakeup) {
3599 scontrol |= (0x4 << 12);
3600 woken_up = true;
3601 }
3602 break;
3603 case ATA_LPM_MED_POWER:
3604 /* allow LPM to PARTIAL */
3605 scontrol &= ~(0x1 << 8);
3606 scontrol |= (0x2 << 8);
3607 break;
3608 case ATA_LPM_MIN_POWER:
3609 if (ata_link_nr_enabled(link) > 0)
3610 /* no restrictions on LPM transitions */
3611 scontrol &= ~(0x3 << 8);
3612 else {
3613 /* empty port, power off */
3614 scontrol &= ~0xf;
3615 scontrol |= (0x1 << 2);
3616 }
3617 break;
3618 default:
3619 WARN_ON(1);
3620 }
3621
3622 rc = sata_scr_write(link, SCR_CONTROL, scontrol);
3623 if (rc)
3624 return rc;
3625
3626 /* give the link time to transit out of LPM state */
3627 if (woken_up)
3628 msleep(10);
3629
3630 /* clear PHYRDY_CHG from SError */
3631 ehc->i.serror &= ~SERR_PHYRDY_CHG;
3632 return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
3633}
3634
3635/**
3636 * ata_std_prereset - prepare for reset
3637 * @link: ATA link to be reset
3638 * @deadline: deadline jiffies for the operation
3639 *
3640 * @link is about to be reset. Initialize it. Failure from
3641 * prereset makes libata abort whole reset sequence and give up
3642 * that port, so prereset should be best-effort. It does its
3643 * best to prepare for reset sequence but if things go wrong, it
3644 * should just whine, not fail.
3645 *
3646 * LOCKING:
3647 * Kernel thread context (may sleep)
3648 *
3649 * RETURNS:
3650 * 0 on success, -errno otherwise.
3651 */
3652int ata_std_prereset(struct ata_link *link, unsigned long deadline)
3653{
3654 struct ata_port *ap = link->ap;
3655 struct ata_eh_context *ehc = &link->eh_context;
3656 const unsigned long *timing = sata_ehc_deb_timing(ehc);
3657 int rc;
3658
3659 /* if we're about to do hardreset, nothing more to do */
3660 if (ehc->i.action & ATA_EH_HARDRESET)
3661 return 0;
3662
3663 /* if SATA, resume link */
3664 if (ap->flags & ATA_FLAG_SATA) {
3665 rc = sata_link_resume(link, timing, deadline);
3666 /* whine about phy resume failure but proceed */
3667 if (rc && rc != -EOPNOTSUPP)
3668 ata_link_warn(link,
3669 "failed to resume link for reset (errno=%d)\n",
3670 rc);
3671 }
3672
3673 /* no point in trying softreset on offline link */
3674 if (ata_phys_link_offline(link))
3675 ehc->i.action &= ~ATA_EH_SOFTRESET;
3676
3677 return 0;
3678}
3679
3680/**
3681 * sata_link_hardreset - reset link via SATA phy reset
3682 * @link: link to reset
3683 * @timing: timing parameters { interval, duratinon, timeout } in msec
3684 * @deadline: deadline jiffies for the operation
3685 * @online: optional out parameter indicating link onlineness
3686 * @check_ready: optional callback to check link readiness
3687 *
3688 * SATA phy-reset @link using DET bits of SControl register.
3689 * After hardreset, link readiness is waited upon using
3690 * ata_wait_ready() if @check_ready is specified. LLDs are
3691 * allowed to not specify @check_ready and wait itself after this
3692 * function returns. Device classification is LLD's
3693 * responsibility.
3694 *
3695 * *@online is set to one iff reset succeeded and @link is online
3696 * after reset.
3697 *
3698 * LOCKING:
3699 * Kernel thread context (may sleep)
3700 *
3701 * RETURNS:
3702 * 0 on success, -errno otherwise.
3703 */
3704int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
3705 unsigned long deadline,
3706 bool *online, int (*check_ready)(struct ata_link *))
3707{
3708 u32 scontrol;
3709 int rc;
3710
3711 DPRINTK("ENTER\n");
3712
3713 if (online)
3714 *online = false;
3715
3716 if (sata_set_spd_needed(link)) {
3717 /* SATA spec says nothing about how to reconfigure
3718 * spd. To be on the safe side, turn off phy during
3719 * reconfiguration. This works for at least ICH7 AHCI
3720 * and Sil3124.
3721 */
3722 if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
3723 goto out;
3724
3725 scontrol = (scontrol & 0x0f0) | 0x304;
3726
3727 if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
3728 goto out;
3729
3730 sata_set_spd(link);
3731 }
3732
3733 /* issue phy wake/reset */
3734 if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
3735 goto out;
3736
3737 scontrol = (scontrol & 0x0f0) | 0x301;
3738
3739 if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol)))
3740 goto out;
3741
3742 /* Couldn't find anything in SATA I/II specs, but AHCI-1.1
3743 * 10.4.2 says at least 1 ms.
3744 */
3745 ata_msleep(link->ap, 1);
3746
3747 /* bring link back */
3748 rc = sata_link_resume(link, timing, deadline);
3749 if (rc)
3750 goto out;
3751 /* if link is offline nothing more to do */
3752 if (ata_phys_link_offline(link))
3753 goto out;
3754
3755 /* Link is online. From this point, -ENODEV too is an error. */
3756 if (online)
3757 *online = true;
3758
3759 if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) {
3760 /* If PMP is supported, we have to do follow-up SRST.
3761 * Some PMPs don't send D2H Reg FIS after hardreset if
3762 * the first port is empty. Wait only for
3763 * ATA_TMOUT_PMP_SRST_WAIT.
3764 */
3765 if (check_ready) {
3766 unsigned long pmp_deadline;
3767
3768 pmp_deadline = ata_deadline(jiffies,
3769 ATA_TMOUT_PMP_SRST_WAIT);
3770 if (time_after(pmp_deadline, deadline))
3771 pmp_deadline = deadline;
3772 ata_wait_ready(link, pmp_deadline, check_ready);
3773 }
3774 rc = -EAGAIN;
3775 goto out;
3776 }
3777
3778 rc = 0;
3779 if (check_ready)
3780 rc = ata_wait_ready(link, deadline, check_ready);
3781 out:
3782 if (rc && rc != -EAGAIN) {
3783 /* online is set iff link is online && reset succeeded */
3784 if (online)
3785 *online = false;
3786 ata_link_err(link, "COMRESET failed (errno=%d)\n", rc);
3787 }
3788 DPRINTK("EXIT, rc=%d\n", rc);
3789 return rc;
3790}
3791
3792/**
3793 * sata_std_hardreset - COMRESET w/o waiting or classification
3794 * @link: link to reset
3795 * @class: resulting class of attached device
3796 * @deadline: deadline jiffies for the operation
3797 *
3798 * Standard SATA COMRESET w/o waiting or classification.
3799 *
3800 * LOCKING:
3801 * Kernel thread context (may sleep)
3802 *
3803 * RETURNS:
3804 * 0 if link offline, -EAGAIN if link online, -errno on errors.
3805 */
3806int sata_std_hardreset(struct ata_link *link, unsigned int *class,
3807 unsigned long deadline)
3808{
3809 const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
3810 bool online;
3811 int rc;
3812
3813 /* do hardreset */
3814 rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
3815 return online ? -EAGAIN : rc;
3816}
3817
3818/**
3819 * ata_std_postreset - standard postreset callback
3820 * @link: the target ata_link
3821 * @classes: classes of attached devices
3822 *
3823 * This function is invoked after a successful reset. Note that
3824 * the device might have been reset more than once using
3825 * different reset methods before postreset is invoked.
3826 *
3827 * LOCKING:
3828 * Kernel thread context (may sleep)
3829 */
3830void ata_std_postreset(struct ata_link *link, unsigned int *classes)
3831{
3832 u32 serror;
3833
3834 DPRINTK("ENTER\n");
3835
3836 /* reset complete, clear SError */
3837 if (!sata_scr_read(link, SCR_ERROR, &serror))
3838 sata_scr_write(link, SCR_ERROR, serror);
3839
3840 /* print link status */
3841 sata_print_link_status(link);
3842
3843 DPRINTK("EXIT\n");
3844}
3845
3846/**
3847 * ata_dev_same_device - Determine whether new ID matches configured device
3848 * @dev: device to compare against
3849 * @new_class: class of the new device
3850 * @new_id: IDENTIFY page of the new device
3851 *
3852 * Compare @new_class and @new_id against @dev and determine
3853 * whether @dev is the device indicated by @new_class and
3854 * @new_id.
3855 *
3856 * LOCKING:
3857 * None.
3858 *
3859 * RETURNS:
3860 * 1 if @dev matches @new_class and @new_id, 0 otherwise.
3861 */
3862static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
3863 const u16 *new_id)
3864{
3865 const u16 *old_id = dev->id;
3866 unsigned char model[2][ATA_ID_PROD_LEN + 1];
3867 unsigned char serial[2][ATA_ID_SERNO_LEN + 1];
3868
3869 if (dev->class != new_class) {
3870 ata_dev_info(dev, "class mismatch %d != %d\n",
3871 dev->class, new_class);
3872 return 0;
3873 }
3874
3875 ata_id_c_string(old_id, model[0], ATA_ID_PROD, sizeof(model[0]));
3876 ata_id_c_string(new_id, model[1], ATA_ID_PROD, sizeof(model[1]));
3877 ata_id_c_string(old_id, serial[0], ATA_ID_SERNO, sizeof(serial[0]));
3878 ata_id_c_string(new_id, serial[1], ATA_ID_SERNO, sizeof(serial[1]));
3879
3880 if (strcmp(model[0], model[1])) {
3881 ata_dev_info(dev, "model number mismatch '%s' != '%s'\n",
3882 model[0], model[1]);
3883 return 0;
3884 }
3885
3886 if (strcmp(serial[0], serial[1])) {
3887 ata_dev_info(dev, "serial number mismatch '%s' != '%s'\n",
3888 serial[0], serial[1]);
3889 return 0;
3890 }
3891
3892 return 1;
3893}
3894
3895/**
3896 * ata_dev_reread_id - Re-read IDENTIFY data
3897 * @dev: target ATA device
3898 * @readid_flags: read ID flags
3899 *
3900 * Re-read IDENTIFY page and make sure @dev is still attached to
3901 * the port.
3902 *
3903 * LOCKING:
3904 * Kernel thread context (may sleep)
3905 *
3906 * RETURNS:
3907 * 0 on success, negative errno otherwise
3908 */
3909int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags)
3910{
3911 unsigned int class = dev->class;
3912 u16 *id = (void *)dev->link->ap->sector_buf;
3913 int rc;
3914
3915 /* read ID data */
3916 rc = ata_dev_read_id(dev, &class, readid_flags, id);
3917 if (rc)
3918 return rc;
3919
3920 /* is the device still there? */
3921 if (!ata_dev_same_device(dev, class, id))
3922 return -ENODEV;
3923
3924 memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS);
3925 return 0;
3926}
3927
3928/**
3929 * ata_dev_revalidate - Revalidate ATA device
3930 * @dev: device to revalidate
3931 * @new_class: new class code
3932 * @readid_flags: read ID flags
3933 *
3934 * Re-read IDENTIFY page, make sure @dev is still attached to the
3935 * port and reconfigure it according to the new IDENTIFY page.
3936 *
3937 * LOCKING:
3938 * Kernel thread context (may sleep)
3939 *
3940 * RETURNS:
3941 * 0 on success, negative errno otherwise
3942 */
3943int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
3944 unsigned int readid_flags)
3945{
3946 u64 n_sectors = dev->n_sectors;
3947 u64 n_native_sectors = dev->n_native_sectors;
3948 int rc;
3949
3950 if (!ata_dev_enabled(dev))
3951 return -ENODEV;
3952
3953 /* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
3954 if (ata_class_enabled(new_class) &&
3955 new_class != ATA_DEV_ATA &&
3956 new_class != ATA_DEV_ATAPI &&
3957 new_class != ATA_DEV_SEMB) {
3958 ata_dev_info(dev, "class mismatch %u != %u\n",
3959 dev->class, new_class);
3960 rc = -ENODEV;
3961 goto fail;
3962 }
3963
3964 /* re-read ID */
3965 rc = ata_dev_reread_id(dev, readid_flags);
3966 if (rc)
3967 goto fail;
3968
3969 /* configure device according to the new ID */
3970 rc = ata_dev_configure(dev);
3971 if (rc)
3972 goto fail;
3973
3974 /* verify n_sectors hasn't changed */
3975 if (dev->class != ATA_DEV_ATA || !n_sectors ||
3976 dev->n_sectors == n_sectors)
3977 return 0;
3978
3979 /* n_sectors has changed */
3980 ata_dev_warn(dev, "n_sectors mismatch %llu != %llu\n",
3981 (unsigned long long)n_sectors,
3982 (unsigned long long)dev->n_sectors);
3983
3984 /*
3985 * Something could have caused HPA to be unlocked
3986 * involuntarily. If n_native_sectors hasn't changed and the
3987 * new size matches it, keep the device.
3988 */
3989 if (dev->n_native_sectors == n_native_sectors &&
3990 dev->n_sectors > n_sectors && dev->n_sectors == n_native_sectors) {
3991 ata_dev_warn(dev,
3992 "new n_sectors matches native, probably "
3993 "late HPA unlock, n_sectors updated\n");
3994 /* use the larger n_sectors */
3995 return 0;
3996 }
3997
3998 /*
3999 * Some BIOSes boot w/o HPA but resume w/ HPA locked. Try
4000 * unlocking HPA in those cases.
4001 *
4002 * https://bugzilla.kernel.org/show_bug.cgi?id=15396
4003 */
4004 if (dev->n_native_sectors == n_native_sectors &&
4005 dev->n_sectors < n_sectors && n_sectors == n_native_sectors &&
4006 !(dev->horkage & ATA_HORKAGE_BROKEN_HPA)) {
4007 ata_dev_warn(dev,
4008 "old n_sectors matches native, probably "
4009 "late HPA lock, will try to unlock HPA\n");
4010 /* try unlocking HPA */
4011 dev->flags |= ATA_DFLAG_UNLOCK_HPA;
4012 rc = -EIO;
4013 } else
4014 rc = -ENODEV;
4015
4016 /* restore original n_[native_]sectors and fail */
4017 dev->n_native_sectors = n_native_sectors;
4018 dev->n_sectors = n_sectors;
4019 fail:
4020 ata_dev_err(dev, "revalidation failed (errno=%d)\n", rc);
4021 return rc;
4022}
4023
4024struct ata_blacklist_entry {
4025 const char *model_num;
4026 const char *model_rev;
4027 unsigned long horkage;
4028};
4029
4030static const struct ata_blacklist_entry ata_device_blacklist [] = {
4031 /* Devices with DMA related problems under Linux */
4032 { "WDC AC11000H", NULL, ATA_HORKAGE_NODMA },
4033 { "WDC AC22100H", NULL, ATA_HORKAGE_NODMA },
4034 { "WDC AC32500H", NULL, ATA_HORKAGE_NODMA },
4035 { "WDC AC33100H", NULL, ATA_HORKAGE_NODMA },
4036 { "WDC AC31600H", NULL, ATA_HORKAGE_NODMA },
4037 { "WDC AC32100H", "24.09P07", ATA_HORKAGE_NODMA },
4038 { "WDC AC23200L", "21.10N21", ATA_HORKAGE_NODMA },
4039 { "Compaq CRD-8241B", NULL, ATA_HORKAGE_NODMA },
4040 { "CRD-8400B", NULL, ATA_HORKAGE_NODMA },
4041 { "CRD-848[02]B", NULL, ATA_HORKAGE_NODMA },
4042 { "CRD-84", NULL, ATA_HORKAGE_NODMA },
4043 { "SanDisk SDP3B", NULL, ATA_HORKAGE_NODMA },
4044 { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA },
4045 { "SANYO CD-ROM CRD", NULL, ATA_HORKAGE_NODMA },
4046 { "HITACHI CDR-8", NULL, ATA_HORKAGE_NODMA },
4047 { "HITACHI CDR-8[34]35",NULL, ATA_HORKAGE_NODMA },
4048 { "Toshiba CD-ROM XM-6202B", NULL, ATA_HORKAGE_NODMA },
4049 { "TOSHIBA CD-ROM XM-1702BC", NULL, ATA_HORKAGE_NODMA },
4050 { "CD-532E-A", NULL, ATA_HORKAGE_NODMA },
4051 { "E-IDE CD-ROM CR-840",NULL, ATA_HORKAGE_NODMA },
4052 { "CD-ROM Drive/F5A", NULL, ATA_HORKAGE_NODMA },
4053 { "WPI CDD-820", NULL, ATA_HORKAGE_NODMA },
4054 { "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA },
4055 { "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA },
4056 { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA },
4057 { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
4058 { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA },
4059 { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
4060 { "2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA },
4061 /* Odd clown on sil3726/4726 PMPs */
4062 { "Config Disk", NULL, ATA_HORKAGE_DISABLE },
4063
4064 /* Weird ATAPI devices */
4065 { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
4066 { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA },
4067
4068 /* Devices we expect to fail diagnostics */
4069
4070 /* Devices where NCQ should be avoided */
4071 /* NCQ is slow */
4072 { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
4073 { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
4074 /* http://thread.gmane.org/gmane.linux.ide/14907 */
4075 { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
4076 /* NCQ is broken */
4077 { "Maxtor *", "BANC*", ATA_HORKAGE_NONCQ },
4078 { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ },
4079 { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ },
4080 { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
4081 { "OCZ CORE_SSD", "02.10104", ATA_HORKAGE_NONCQ },
4082
4083 /* Seagate NCQ + FLUSH CACHE firmware bug */
4084 { "ST31500341AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
4085 ATA_HORKAGE_FIRMWARE_WARN },
4086
4087 { "ST31000333AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
4088 ATA_HORKAGE_FIRMWARE_WARN },
4089
4090 { "ST3640[36]23AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
4091 ATA_HORKAGE_FIRMWARE_WARN },
4092
4093 { "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
4094 ATA_HORKAGE_FIRMWARE_WARN },
4095
4096 /* Blacklist entries taken from Silicon Image 3124/3132
4097 Windows driver .inf file - also several Linux problem reports */
4098 { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
4099 { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
4100 { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
4101
4102 /* https://bugzilla.kernel.org/show_bug.cgi?id=15573 */
4103 { "C300-CTFDDAC128MAG", "0001", ATA_HORKAGE_NONCQ, },
4104
4105 /* devices which puke on READ_NATIVE_MAX */
4106 { "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, },
4107 { "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA },
4108 { "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
4109 { "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA },
4110
4111 /* this one allows HPA unlocking but fails IOs on the area */
4112 { "OCZ-VERTEX", "1.30", ATA_HORKAGE_BROKEN_HPA },
4113
4114 /* Devices which report 1 sector over size HPA */
4115 { "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, },
4116 { "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, },
4117 { "ST310211A", NULL, ATA_HORKAGE_HPA_SIZE, },
4118
4119 /* Devices which get the IVB wrong */
4120 { "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, },
4121 /* Maybe we should just blacklist TSSTcorp... */
4122 { "TSSTcorp CDDVDW SH-S202[HJN]", "SB0[01]", ATA_HORKAGE_IVB, },
4123
4124 /* Devices that do not need bridging limits applied */
4125 { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, },
4126
4127 /* Devices which aren't very happy with higher link speeds */
4128 { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
4129 { "Seagate FreeAgent GoFlex", NULL, ATA_HORKAGE_1_5_GBPS, },
4130
4131 /*
4132 * Devices which choke on SETXFER. Applies only if both the
4133 * device and controller are SATA.
4134 */
4135 { "PIONEER DVD-RW DVRTD08", NULL, ATA_HORKAGE_NOSETXFER },
4136 { "PIONEER DVD-RW DVRTD08A", NULL, ATA_HORKAGE_NOSETXFER },
4137 { "PIONEER DVD-RW DVR-215", NULL, ATA_HORKAGE_NOSETXFER },
4138 { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER },
4139 { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
4140
4141 /* End Marker */
4142 { }
4143};
4144
4145/**
4146 * glob_match - match a text string against a glob-style pattern
4147 * @text: the string to be examined
4148 * @pattern: the glob-style pattern to be matched against
4149 *
4150 * Either/both of text and pattern can be empty strings.
4151 *
4152 * Match text against a glob-style pattern, with wildcards and simple sets:
4153 *
4154 * ? matches any single character.
4155 * * matches any run of characters.
4156 * [xyz] matches a single character from the set: x, y, or z.
4157 * [a-d] matches a single character from the range: a, b, c, or d.
4158 * [a-d0-9] matches a single character from either range.
4159 *
4160 * The special characters ?, [, -, or *, can be matched using a set, eg. [*]
4161 * Behaviour with malformed patterns is undefined, though generally reasonable.
4162 *
4163 * Sample patterns: "SD1?", "SD1[0-5]", "*R0", "SD*1?[012]*xx"
4164 *
4165 * This function uses one level of recursion per '*' in pattern.
4166 * Since it calls _nothing_ else, and has _no_ explicit local variables,
4167 * this will not cause stack problems for any reasonable use here.
4168 *
4169 * RETURNS:
4170 * 0 on match, 1 otherwise.
4171 */
4172static int glob_match (const char *text, const char *pattern)
4173{
4174 do {
4175 /* Match single character or a '?' wildcard */
4176 if (*text == *pattern || *pattern == '?') {
4177 if (!*pattern++)
4178 return 0; /* End of both strings: match */
4179 } else {
4180 /* Match single char against a '[' bracketed ']' pattern set */
4181 if (!*text || *pattern != '[')
4182 break; /* Not a pattern set */
4183 while (*++pattern && *pattern != ']' && *text != *pattern) {
4184 if (*pattern == '-' && *(pattern - 1) != '[')
4185 if (*text > *(pattern - 1) && *text < *(pattern + 1)) {
4186 ++pattern;
4187 break;
4188 }
4189 }
4190 if (!*pattern || *pattern == ']')
4191 return 1; /* No match */
4192 while (*pattern && *pattern++ != ']');
4193 }
4194 } while (*++text && *pattern);
4195
4196 /* Match any run of chars against a '*' wildcard */
4197 if (*pattern == '*') {
4198 if (!*++pattern)
4199 return 0; /* Match: avoid recursion at end of pattern */
4200 /* Loop to handle additional pattern chars after the wildcard */
4201 while (*text) {
4202 if (glob_match(text, pattern) == 0)
4203 return 0; /* Remainder matched */
4204 ++text; /* Absorb (match) this char and try again */
4205 }
4206 }
4207 if (!*text && !*pattern)
4208 return 0; /* End of both strings: match */
4209 return 1; /* No match */
4210}
4211
4212static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
4213{
4214 unsigned char model_num[ATA_ID_PROD_LEN + 1];
4215 unsigned char model_rev[ATA_ID_FW_REV_LEN + 1];
4216 const struct ata_blacklist_entry *ad = ata_device_blacklist;
4217
4218 ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
4219 ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev));
4220
4221 while (ad->model_num) {
4222 if (!glob_match(model_num, ad->model_num)) {
4223 if (ad->model_rev == NULL)
4224 return ad->horkage;
4225 if (!glob_match(model_rev, ad->model_rev))
4226 return ad->horkage;
4227 }
4228 ad++;
4229 }
4230 return 0;
4231}
4232
4233static int ata_dma_blacklisted(const struct ata_device *dev)
4234{
4235 /* We don't support polling DMA.
4236 * DMA blacklist those ATAPI devices with CDB-intr (and use PIO)
4237 * if the LLDD handles only interrupts in the HSM_ST_LAST state.
4238 */
4239 if ((dev->link->ap->flags & ATA_FLAG_PIO_POLLING) &&
4240 (dev->flags & ATA_DFLAG_CDB_INTR))
4241 return 1;
4242 return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0;
4243}
4244
4245/**
4246 * ata_is_40wire - check drive side detection
4247 * @dev: device
4248 *
4249 * Perform drive side detection decoding, allowing for device vendors
4250 * who can't follow the documentation.
4251 */
4252
4253static int ata_is_40wire(struct ata_device *dev)
4254{
4255 if (dev->horkage & ATA_HORKAGE_IVB)
4256 return ata_drive_40wire_relaxed(dev->id);
4257 return ata_drive_40wire(dev->id);
4258}
4259
4260/**
4261 * cable_is_40wire - 40/80/SATA decider
4262 * @ap: port to consider
4263 *
4264 * This function encapsulates the policy for speed management
4265 * in one place. At the moment we don't cache the result but
4266 * there is a good case for setting ap->cbl to the result when
4267 * we are called with unknown cables (and figuring out if it
4268 * impacts hotplug at all).
4269 *
4270 * Return 1 if the cable appears to be 40 wire.
4271 */
4272
4273static int cable_is_40wire(struct ata_port *ap)
4274{
4275 struct ata_link *link;
4276 struct ata_device *dev;
4277
4278 /* If the controller thinks we are 40 wire, we are. */
4279 if (ap->cbl == ATA_CBL_PATA40)
4280 return 1;
4281
4282 /* If the controller thinks we are 80 wire, we are. */
4283 if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
4284 return 0;
4285
4286 /* If the system is known to be 40 wire short cable (eg
4287 * laptop), then we allow 80 wire modes even if the drive
4288 * isn't sure.
4289 */
4290 if (ap->cbl == ATA_CBL_PATA40_SHORT)
4291 return 0;
4292
4293 /* If the controller doesn't know, we scan.
4294 *
4295 * Note: We look for all 40 wire detects at this point. Any
4296 * 80 wire detect is taken to be 80 wire cable because
4297 * - in many setups only the one drive (slave if present) will
4298 * give a valid detect
4299 * - if you have a non detect capable drive you don't want it
4300 * to colour the choice
4301 */
4302 ata_for_each_link(link, ap, EDGE) {
4303 ata_for_each_dev(dev, link, ENABLED) {
4304 if (!ata_is_40wire(dev))
4305 return 0;
4306 }
4307 }
4308 return 1;
4309}
4310
4311/**
4312 * ata_dev_xfermask - Compute supported xfermask of the given device
4313 * @dev: Device to compute xfermask for
4314 *
4315 * Compute supported xfermask of @dev and store it in
4316 * dev->*_mask. This function is responsible for applying all
4317 * known limits including host controller limits, device
4318 * blacklist, etc...
4319 *
4320 * LOCKING:
4321 * None.
4322 */
4323static void ata_dev_xfermask(struct ata_device *dev)
4324{
4325 struct ata_link *link = dev->link;
4326 struct ata_port *ap = link->ap;
4327 struct ata_host *host = ap->host;
4328 unsigned long xfer_mask;
4329
4330 /* controller modes available */
4331 xfer_mask = ata_pack_xfermask(ap->pio_mask,
4332 ap->mwdma_mask, ap->udma_mask);
4333
4334 /* drive modes available */
4335 xfer_mask &= ata_pack_xfermask(dev->pio_mask,
4336 dev->mwdma_mask, dev->udma_mask);
4337 xfer_mask &= ata_id_xfermask(dev->id);
4338
4339 /*
4340 * CFA Advanced TrueIDE timings are not allowed on a shared
4341 * cable
4342 */
4343 if (ata_dev_pair(dev)) {
4344 /* No PIO5 or PIO6 */
4345 xfer_mask &= ~(0x03 << (ATA_SHIFT_PIO + 5));
4346 /* No MWDMA3 or MWDMA 4 */
4347 xfer_mask &= ~(0x03 << (ATA_SHIFT_MWDMA + 3));
4348 }
4349
4350 if (ata_dma_blacklisted(dev)) {
4351 xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
4352 ata_dev_warn(dev,
4353 "device is on DMA blacklist, disabling DMA\n");
4354 }
4355
4356 if ((host->flags & ATA_HOST_SIMPLEX) &&
4357 host->simplex_claimed && host->simplex_claimed != ap) {
4358 xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
4359 ata_dev_warn(dev,
4360 "simplex DMA is claimed by other device, disabling DMA\n");
4361 }
4362
4363 if (ap->flags & ATA_FLAG_NO_IORDY)
4364 xfer_mask &= ata_pio_mask_no_iordy(dev);
4365
4366 if (ap->ops->mode_filter)
4367 xfer_mask = ap->ops->mode_filter(dev, xfer_mask);
4368
4369 /* Apply cable rule here. Don't apply it early because when
4370 * we handle hot plug the cable type can itself change.
4371 * Check this last so that we know if the transfer rate was
4372 * solely limited by the cable.
4373 * Unknown or 80 wire cables reported host side are checked
4374 * drive side as well. Cases where we know a 40wire cable
4375 * is used safely for 80 are not checked here.
4376 */
4377 if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
4378 /* UDMA/44 or higher would be available */
4379 if (cable_is_40wire(ap)) {
4380 ata_dev_warn(dev,
4381 "limited to UDMA/33 due to 40-wire cable\n");
4382 xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
4383 }
4384
4385 ata_unpack_xfermask(xfer_mask, &dev->pio_mask,
4386 &dev->mwdma_mask, &dev->udma_mask);
4387}
4388
4389/**
4390 * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command
4391 * @dev: Device to which command will be sent
4392 *
4393 * Issue SET FEATURES - XFER MODE command to device @dev
4394 * on port @ap.
4395 *
4396 * LOCKING:
4397 * PCI/etc. bus probe sem.
4398 *
4399 * RETURNS:
4400 * 0 on success, AC_ERR_* mask otherwise.
4401 */
4402
4403static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
4404{
4405 struct ata_taskfile tf;
4406 unsigned int err_mask;
4407
4408 /* set up set-features taskfile */
4409 DPRINTK("set features - xfer mode\n");
4410
4411 /* Some controllers and ATAPI devices show flaky interrupt
4412 * behavior after setting xfer mode. Use polling instead.
4413 */
4414 ata_tf_init(dev, &tf);
4415 tf.command = ATA_CMD_SET_FEATURES;
4416 tf.feature = SETFEATURES_XFER;
4417 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING;
4418 tf.protocol = ATA_PROT_NODATA;
4419 /* If we are using IORDY we must send the mode setting command */
4420 if (ata_pio_need_iordy(dev))
4421 tf.nsect = dev->xfer_mode;
4422 /* If the device has IORDY and the controller does not - turn it off */
4423 else if (ata_id_has_iordy(dev->id))
4424 tf.nsect = 0x01;
4425 else /* In the ancient relic department - skip all of this */
4426 return 0;
4427
4428 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
4429
4430 DPRINTK("EXIT, err_mask=%x\n", err_mask);
4431 return err_mask;
4432}
4433
4434/**
4435 * ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES
4436 * @dev: Device to which command will be sent
4437 * @enable: Whether to enable or disable the feature
4438 * @feature: The sector count represents the feature to set
4439 *
4440 * Issue SET FEATURES - SATA FEATURES command to device @dev
4441 * on port @ap with sector count
4442 *
4443 * LOCKING:
4444 * PCI/etc. bus probe sem.
4445 *
4446 * RETURNS:
4447 * 0 on success, AC_ERR_* mask otherwise.
4448 */
4449unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature)
4450{
4451 struct ata_taskfile tf;
4452 unsigned int err_mask;
4453
4454 /* set up set-features taskfile */
4455 DPRINTK("set features - SATA features\n");
4456
4457 ata_tf_init(dev, &tf);
4458 tf.command = ATA_CMD_SET_FEATURES;
4459 tf.feature = enable;
4460 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
4461 tf.protocol = ATA_PROT_NODATA;
4462 tf.nsect = feature;
4463
4464 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
4465
4466 DPRINTK("EXIT, err_mask=%x\n", err_mask);
4467 return err_mask;
4468}
4469
4470/**
4471 * ata_dev_init_params - Issue INIT DEV PARAMS command
4472 * @dev: Device to which command will be sent
4473 * @heads: Number of heads (taskfile parameter)
4474 * @sectors: Number of sectors (taskfile parameter)
4475 *
4476 * LOCKING:
4477 * Kernel thread context (may sleep)
4478 *
4479 * RETURNS:
4480 * 0 on success, AC_ERR_* mask otherwise.
4481 */
4482static unsigned int ata_dev_init_params(struct ata_device *dev,
4483 u16 heads, u16 sectors)
4484{
4485 struct ata_taskfile tf;
4486 unsigned int err_mask;
4487
4488 /* Number of sectors per track 1-255. Number of heads 1-16 */
4489 if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
4490 return AC_ERR_INVALID;
4491
4492 /* set up init dev params taskfile */
4493 DPRINTK("init dev params \n");
4494
4495 ata_tf_init(dev, &tf);
4496 tf.command = ATA_CMD_INIT_DEV_PARAMS;
4497 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
4498 tf.protocol = ATA_PROT_NODATA;
4499 tf.nsect = sectors;
4500 tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
4501
4502 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
4503 /* A clean abort indicates an original or just out of spec drive
4504 and we should continue as we issue the setup based on the
4505 drive reported working geometry */
4506 if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
4507 err_mask = 0;
4508
4509 DPRINTK("EXIT, err_mask=%x\n", err_mask);
4510 return err_mask;
4511}
4512
4513/**
4514 * ata_sg_clean - Unmap DMA memory associated with command
4515 * @qc: Command containing DMA memory to be released
4516 *
4517 * Unmap all mapped DMA memory associated with this command.
4518 *
4519 * LOCKING:
4520 * spin_lock_irqsave(host lock)
4521 */
4522void ata_sg_clean(struct ata_queued_cmd *qc)
4523{
4524 struct ata_port *ap = qc->ap;
4525 struct scatterlist *sg = qc->sg;
4526 int dir = qc->dma_dir;
4527
4528 WARN_ON_ONCE(sg == NULL);
4529
4530 VPRINTK("unmapping %u sg elements\n", qc->n_elem);
4531
4532 if (qc->n_elem)
4533 dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
4534
4535 qc->flags &= ~ATA_QCFLAG_DMAMAP;
4536 qc->sg = NULL;
4537}
4538
4539/**
4540 * atapi_check_dma - Check whether ATAPI DMA can be supported
4541 * @qc: Metadata associated with taskfile to check
4542 *
4543 * Allow low-level driver to filter ATA PACKET commands, returning
4544 * a status indicating whether or not it is OK to use DMA for the
4545 * supplied PACKET command.
4546 *
4547 * LOCKING:
4548 * spin_lock_irqsave(host lock)
4549 *
4550 * RETURNS: 0 when ATAPI DMA can be used
4551 * nonzero otherwise
4552 */
4553int atapi_check_dma(struct ata_queued_cmd *qc)
4554{
4555 struct ata_port *ap = qc->ap;
4556
4557 /* Don't allow DMA if it isn't multiple of 16 bytes. Quite a
4558 * few ATAPI devices choke on such DMA requests.
4559 */
4560 if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) &&
4561 unlikely(qc->nbytes & 15))
4562 return 1;
4563
4564 if (ap->ops->check_atapi_dma)
4565 return ap->ops->check_atapi_dma(qc);
4566
4567 return 0;
4568}
4569
4570/**
4571 * ata_std_qc_defer - Check whether a qc needs to be deferred
4572 * @qc: ATA command in question
4573 *
4574 * Non-NCQ commands cannot run with any other command, NCQ or
4575 * not. As upper layer only knows the queue depth, we are
4576 * responsible for maintaining exclusion. This function checks
4577 * whether a new command @qc can be issued.
4578 *
4579 * LOCKING:
4580 * spin_lock_irqsave(host lock)
4581 *
4582 * RETURNS:
4583 * ATA_DEFER_* if deferring is needed, 0 otherwise.
4584 */
4585int ata_std_qc_defer(struct ata_queued_cmd *qc)
4586{
4587 struct ata_link *link = qc->dev->link;
4588
4589 if (qc->tf.protocol == ATA_PROT_NCQ) {
4590 if (!ata_tag_valid(link->active_tag))
4591 return 0;
4592 } else {
4593 if (!ata_tag_valid(link->active_tag) && !link->sactive)
4594 return 0;
4595 }
4596
4597 return ATA_DEFER_LINK;
4598}
4599
4600void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
4601
4602/**
4603 * ata_sg_init - Associate command with scatter-gather table.
4604 * @qc: Command to be associated
4605 * @sg: Scatter-gather table.
4606 * @n_elem: Number of elements in s/g table.
4607 *
4608 * Initialize the data-related elements of queued_cmd @qc
4609 * to point to a scatter-gather table @sg, containing @n_elem
4610 * elements.
4611 *
4612 * LOCKING:
4613 * spin_lock_irqsave(host lock)
4614 */
4615void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
4616 unsigned int n_elem)
4617{
4618 qc->sg = sg;
4619 qc->n_elem = n_elem;
4620 qc->cursg = qc->sg;
4621}
4622
4623/**
4624 * ata_sg_setup - DMA-map the scatter-gather table associated with a command.
4625 * @qc: Command with scatter-gather table to be mapped.
4626 *
4627 * DMA-map the scatter-gather table associated with queued_cmd @qc.
4628 *
4629 * LOCKING:
4630 * spin_lock_irqsave(host lock)
4631 *
4632 * RETURNS:
4633 * Zero on success, negative on error.
4634 *
4635 */
4636static int ata_sg_setup(struct ata_queued_cmd *qc)
4637{
4638 struct ata_port *ap = qc->ap;
4639 unsigned int n_elem;
4640
4641 VPRINTK("ENTER, ata%u\n", ap->print_id);
4642
4643 n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir);
4644 if (n_elem < 1)
4645 return -1;
4646
4647 DPRINTK("%d sg elements mapped\n", n_elem);
4648 qc->orig_n_elem = qc->n_elem;
4649 qc->n_elem = n_elem;
4650 qc->flags |= ATA_QCFLAG_DMAMAP;
4651
4652 return 0;
4653}
4654
4655/**
4656 * swap_buf_le16 - swap halves of 16-bit words in place
4657 * @buf: Buffer to swap
4658 * @buf_words: Number of 16-bit words in buffer.
4659 *
4660 * Swap halves of 16-bit words if needed to convert from
4661 * little-endian byte order to native cpu byte order, or
4662 * vice-versa.
4663 *
4664 * LOCKING:
4665 * Inherited from caller.
4666 */
4667void swap_buf_le16(u16 *buf, unsigned int buf_words)
4668{
4669#ifdef __BIG_ENDIAN
4670 unsigned int i;
4671
4672 for (i = 0; i < buf_words; i++)
4673 buf[i] = le16_to_cpu(buf[i]);
4674#endif /* __BIG_ENDIAN */
4675}
4676
4677/**
4678 * ata_qc_new - Request an available ATA command, for queueing
4679 * @ap: target port
4680 *
4681 * LOCKING:
4682 * None.
4683 */
4684
4685static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
4686{
4687 struct ata_queued_cmd *qc = NULL;
4688 unsigned int i;
4689
4690 /* no command while frozen */
4691 if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
4692 return NULL;
4693
4694 /* the last tag is reserved for internal command. */
4695 for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
4696 if (!test_and_set_bit(i, &ap->qc_allocated)) {
4697 qc = __ata_qc_from_tag(ap, i);
4698 break;
4699 }
4700
4701 if (qc)
4702 qc->tag = i;
4703
4704 return qc;
4705}
4706
4707/**
4708 * ata_qc_new_init - Request an available ATA command, and initialize it
4709 * @dev: Device from whom we request an available command structure
4710 *
4711 * LOCKING:
4712 * None.
4713 */
4714
4715struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev)
4716{
4717 struct ata_port *ap = dev->link->ap;
4718 struct ata_queued_cmd *qc;
4719
4720 qc = ata_qc_new(ap);
4721 if (qc) {
4722 qc->scsicmd = NULL;
4723 qc->ap = ap;
4724 qc->dev = dev;
4725
4726 ata_qc_reinit(qc);
4727 }
4728
4729 return qc;
4730}
4731
4732/**
4733 * ata_qc_free - free unused ata_queued_cmd
4734 * @qc: Command to complete
4735 *
4736 * Designed to free unused ata_queued_cmd object
4737 * in case something prevents using it.
4738 *
4739 * LOCKING:
4740 * spin_lock_irqsave(host lock)
4741 */
4742void ata_qc_free(struct ata_queued_cmd *qc)
4743{
4744 struct ata_port *ap;
4745 unsigned int tag;
4746
4747 WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
4748 ap = qc->ap;
4749
4750 qc->flags = 0;
4751 tag = qc->tag;
4752 if (likely(ata_tag_valid(tag))) {
4753 qc->tag = ATA_TAG_POISON;
4754 clear_bit(tag, &ap->qc_allocated);
4755 }
4756}
4757
4758void __ata_qc_complete(struct ata_queued_cmd *qc)
4759{
4760 struct ata_port *ap;
4761 struct ata_link *link;
4762
4763 WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
4764 WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE));
4765 ap = qc->ap;
4766 link = qc->dev->link;
4767
4768 if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
4769 ata_sg_clean(qc);
4770
4771 /* command should be marked inactive atomically with qc completion */
4772 if (qc->tf.protocol == ATA_PROT_NCQ) {
4773 link->sactive &= ~(1 << qc->tag);
4774 if (!link->sactive)
4775 ap->nr_active_links--;
4776 } else {
4777 link->active_tag = ATA_TAG_POISON;
4778 ap->nr_active_links--;
4779 }
4780
4781 /* clear exclusive status */
4782 if (unlikely(qc->flags & ATA_QCFLAG_CLEAR_EXCL &&
4783 ap->excl_link == link))
4784 ap->excl_link = NULL;
4785
4786 /* atapi: mark qc as inactive to prevent the interrupt handler
4787 * from completing the command twice later, before the error handler
4788 * is called. (when rc != 0 and atapi request sense is needed)
4789 */
4790 qc->flags &= ~ATA_QCFLAG_ACTIVE;
4791 ap->qc_active &= ~(1 << qc->tag);
4792
4793 /* call completion callback */
4794 qc->complete_fn(qc);
4795}
4796
4797static void fill_result_tf(struct ata_queued_cmd *qc)
4798{
4799 struct ata_port *ap = qc->ap;
4800
4801 qc->result_tf.flags = qc->tf.flags;
4802 ap->ops->qc_fill_rtf(qc);
4803}
4804
4805static void ata_verify_xfer(struct ata_queued_cmd *qc)
4806{
4807 struct ata_device *dev = qc->dev;
4808
4809 if (ata_is_nodata(qc->tf.protocol))
4810 return;
4811
4812 if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol))
4813 return;
4814
4815 dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER;
4816}
4817
4818/**
4819 * ata_qc_complete - Complete an active ATA command
4820 * @qc: Command to complete
4821 *
4822 * Indicate to the mid and upper layers that an ATA command has
4823 * completed, with either an ok or not-ok status.
4824 *
4825 * Refrain from calling this function multiple times when
4826 * successfully completing multiple NCQ commands.
4827 * ata_qc_complete_multiple() should be used instead, which will
4828 * properly update IRQ expect state.
4829 *
4830 * LOCKING:
4831 * spin_lock_irqsave(host lock)
4832 */
4833void ata_qc_complete(struct ata_queued_cmd *qc)
4834{
4835 struct ata_port *ap = qc->ap;
4836
4837 /* XXX: New EH and old EH use different mechanisms to
4838 * synchronize EH with regular execution path.
4839 *
4840 * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED.
4841 * Normal execution path is responsible for not accessing a
4842 * failed qc. libata core enforces the rule by returning NULL
4843 * from ata_qc_from_tag() for failed qcs.
4844 *
4845 * Old EH depends on ata_qc_complete() nullifying completion
4846 * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does
4847 * not synchronize with interrupt handler. Only PIO task is
4848 * taken care of.
4849 */
4850 if (ap->ops->error_handler) {
4851 struct ata_device *dev = qc->dev;
4852 struct ata_eh_info *ehi = &dev->link->eh_info;
4853
4854 if (unlikely(qc->err_mask))
4855 qc->flags |= ATA_QCFLAG_FAILED;
4856
4857 /*
4858 * Finish internal commands without any further processing
4859 * and always with the result TF filled.
4860 */
4861 if (unlikely(ata_tag_internal(qc->tag))) {
4862 fill_result_tf(qc);
4863 __ata_qc_complete(qc);
4864 return;
4865 }
4866
4867 /*
4868 * Non-internal qc has failed. Fill the result TF and
4869 * summon EH.
4870 */
4871 if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
4872 fill_result_tf(qc);
4873 ata_qc_schedule_eh(qc);
4874 return;
4875 }
4876
4877 WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
4878
4879 /* read result TF if requested */
4880 if (qc->flags & ATA_QCFLAG_RESULT_TF)
4881 fill_result_tf(qc);
4882
4883 /* Some commands need post-processing after successful
4884 * completion.
4885 */
4886 switch (qc->tf.command) {
4887 case ATA_CMD_SET_FEATURES:
4888 if (qc->tf.feature != SETFEATURES_WC_ON &&
4889 qc->tf.feature != SETFEATURES_WC_OFF)
4890 break;
4891 /* fall through */
4892 case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
4893 case ATA_CMD_SET_MULTI: /* multi_count changed */
4894 /* revalidate device */
4895 ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE;
4896 ata_port_schedule_eh(ap);
4897 break;
4898
4899 case ATA_CMD_SLEEP:
4900 dev->flags |= ATA_DFLAG_SLEEPING;
4901 break;
4902 }
4903
4904 if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER))
4905 ata_verify_xfer(qc);
4906
4907 __ata_qc_complete(qc);
4908 } else {
4909 if (qc->flags & ATA_QCFLAG_EH_SCHEDULED)
4910 return;
4911
4912 /* read result TF if failed or requested */
4913 if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF)
4914 fill_result_tf(qc);
4915
4916 __ata_qc_complete(qc);
4917 }
4918}
4919
4920/**
4921 * ata_qc_complete_multiple - Complete multiple qcs successfully
4922 * @ap: port in question
4923 * @qc_active: new qc_active mask
4924 *
4925 * Complete in-flight commands. This functions is meant to be
4926 * called from low-level driver's interrupt routine to complete
4927 * requests normally. ap->qc_active and @qc_active is compared
4928 * and commands are completed accordingly.
4929 *
4930 * Always use this function when completing multiple NCQ commands
4931 * from IRQ handlers instead of calling ata_qc_complete()
4932 * multiple times to keep IRQ expect status properly in sync.
4933 *
4934 * LOCKING:
4935 * spin_lock_irqsave(host lock)
4936 *
4937 * RETURNS:
4938 * Number of completed commands on success, -errno otherwise.
4939 */
4940int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active)
4941{
4942 int nr_done = 0;
4943 u32 done_mask;
4944
4945 done_mask = ap->qc_active ^ qc_active;
4946
4947 if (unlikely(done_mask & qc_active)) {
4948 ata_port_err(ap, "illegal qc_active transition (%08x->%08x)\n",
4949 ap->qc_active, qc_active);
4950 return -EINVAL;
4951 }
4952
4953 while (done_mask) {
4954 struct ata_queued_cmd *qc;
4955 unsigned int tag = __ffs(done_mask);
4956
4957 qc = ata_qc_from_tag(ap, tag);
4958 if (qc) {
4959 ata_qc_complete(qc);
4960 nr_done++;
4961 }
4962 done_mask &= ~(1 << tag);
4963 }
4964
4965 return nr_done;
4966}
4967
4968/**
4969 * ata_qc_issue - issue taskfile to device
4970 * @qc: command to issue to device
4971 *
4972 * Prepare an ATA command to submission to device.
4973 * This includes mapping the data into a DMA-able
4974 * area, filling in the S/G table, and finally
4975 * writing the taskfile to hardware, starting the command.
4976 *
4977 * LOCKING:
4978 * spin_lock_irqsave(host lock)
4979 */
4980void ata_qc_issue(struct ata_queued_cmd *qc)
4981{
4982 struct ata_port *ap = qc->ap;
4983 struct ata_link *link = qc->dev->link;
4984 u8 prot = qc->tf.protocol;
4985
4986 /* Make sure only one non-NCQ command is outstanding. The
4987 * check is skipped for old EH because it reuses active qc to
4988 * request ATAPI sense.
4989 */
4990 WARN_ON_ONCE(ap->ops->error_handler && ata_tag_valid(link->active_tag));
4991
4992 if (ata_is_ncq(prot)) {
4993 WARN_ON_ONCE(link->sactive & (1 << qc->tag));
4994
4995 if (!link->sactive)
4996 ap->nr_active_links++;
4997 link->sactive |= 1 << qc->tag;
4998 } else {
4999 WARN_ON_ONCE(link->sactive);
5000
5001 ap->nr_active_links++;
5002 link->active_tag = qc->tag;
5003 }
5004
5005 qc->flags |= ATA_QCFLAG_ACTIVE;
5006 ap->qc_active |= 1 << qc->tag;
5007
5008 /*
5009 * We guarantee to LLDs that they will have at least one
5010 * non-zero sg if the command is a data command.
5011 */
5012 if (WARN_ON_ONCE(ata_is_data(prot) &&
5013 (!qc->sg || !qc->n_elem || !qc->nbytes)))
5014 goto sys_err;
5015
5016 if (ata_is_dma(prot) || (ata_is_pio(prot) &&
5017 (ap->flags & ATA_FLAG_PIO_DMA)))
5018 if (ata_sg_setup(qc))
5019 goto sys_err;
5020
5021 /* if device is sleeping, schedule reset and abort the link */
5022 if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
5023 link->eh_info.action |= ATA_EH_RESET;
5024 ata_ehi_push_desc(&link->eh_info, "waking up from sleep");
5025 ata_link_abort(link);
5026 return;
5027 }
5028
5029 ap->ops->qc_prep(qc);
5030
5031 qc->err_mask |= ap->ops->qc_issue(qc);
5032 if (unlikely(qc->err_mask))
5033 goto err;
5034 return;
5035
5036sys_err:
5037 qc->err_mask |= AC_ERR_SYSTEM;
5038err:
5039 ata_qc_complete(qc);
5040}
5041
5042/**
5043 * sata_scr_valid - test whether SCRs are accessible
5044 * @link: ATA link to test SCR accessibility for
5045 *
5046 * Test whether SCRs are accessible for @link.
5047 *
5048 * LOCKING:
5049 * None.
5050 *
5051 * RETURNS:
5052 * 1 if SCRs are accessible, 0 otherwise.
5053 */
5054int sata_scr_valid(struct ata_link *link)
5055{
5056 struct ata_port *ap = link->ap;
5057
5058 return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read;
5059}
5060
5061/**
5062 * sata_scr_read - read SCR register of the specified port
5063 * @link: ATA link to read SCR for
5064 * @reg: SCR to read
5065 * @val: Place to store read value
5066 *
5067 * Read SCR register @reg of @link into *@val. This function is
5068 * guaranteed to succeed if @link is ap->link, the cable type of
5069 * the port is SATA and the port implements ->scr_read.
5070 *
5071 * LOCKING:
5072 * None if @link is ap->link. Kernel thread context otherwise.
5073 *
5074 * RETURNS:
5075 * 0 on success, negative errno on failure.
5076 */
5077int sata_scr_read(struct ata_link *link, int reg, u32 *val)
5078{
5079 if (ata_is_host_link(link)) {
5080 if (sata_scr_valid(link))
5081 return link->ap->ops->scr_read(link, reg, val);
5082 return -EOPNOTSUPP;
5083 }
5084
5085 return sata_pmp_scr_read(link, reg, val);
5086}
5087
5088/**
5089 * sata_scr_write - write SCR register of the specified port
5090 * @link: ATA link to write SCR for
5091 * @reg: SCR to write
5092 * @val: value to write
5093 *
5094 * Write @val to SCR register @reg of @link. This function is
5095 * guaranteed to succeed if @link is ap->link, the cable type of
5096 * the port is SATA and the port implements ->scr_read.
5097 *
5098 * LOCKING:
5099 * None if @link is ap->link. Kernel thread context otherwise.
5100 *
5101 * RETURNS:
5102 * 0 on success, negative errno on failure.
5103 */
5104int sata_scr_write(struct ata_link *link, int reg, u32 val)
5105{
5106 if (ata_is_host_link(link)) {
5107 if (sata_scr_valid(link))
5108 return link->ap->ops->scr_write(link, reg, val);
5109 return -EOPNOTSUPP;
5110 }
5111
5112 return sata_pmp_scr_write(link, reg, val);
5113}
5114
5115/**
5116 * sata_scr_write_flush - write SCR register of the specified port and flush
5117 * @link: ATA link to write SCR for
5118 * @reg: SCR to write
5119 * @val: value to write
5120 *
5121 * This function is identical to sata_scr_write() except that this
5122 * function performs flush after writing to the register.
5123 *
5124 * LOCKING:
5125 * None if @link is ap->link. Kernel thread context otherwise.
5126 *
5127 * RETURNS:
5128 * 0 on success, negative errno on failure.
5129 */
5130int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
5131{
5132 if (ata_is_host_link(link)) {
5133 int rc;
5134
5135 if (sata_scr_valid(link)) {
5136 rc = link->ap->ops->scr_write(link, reg, val);
5137 if (rc == 0)
5138 rc = link->ap->ops->scr_read(link, reg, &val);
5139 return rc;
5140 }
5141 return -EOPNOTSUPP;
5142 }
5143
5144 return sata_pmp_scr_write(link, reg, val);
5145}
5146
5147/**
5148 * ata_phys_link_online - test whether the given link is online
5149 * @link: ATA link to test
5150 *
5151 * Test whether @link is online. Note that this function returns
5152 * 0 if online status of @link cannot be obtained, so
5153 * ata_link_online(link) != !ata_link_offline(link).
5154 *
5155 * LOCKING:
5156 * None.
5157 *
5158 * RETURNS:
5159 * True if the port online status is available and online.
5160 */
5161bool ata_phys_link_online(struct ata_link *link)
5162{
5163 u32 sstatus;
5164
5165 if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
5166 ata_sstatus_online(sstatus))
5167 return true;
5168 return false;
5169}
5170
5171/**
5172 * ata_phys_link_offline - test whether the given link is offline
5173 * @link: ATA link to test
5174 *
5175 * Test whether @link is offline. Note that this function
5176 * returns 0 if offline status of @link cannot be obtained, so
5177 * ata_link_online(link) != !ata_link_offline(link).
5178 *
5179 * LOCKING:
5180 * None.
5181 *
5182 * RETURNS:
5183 * True if the port offline status is available and offline.
5184 */
5185bool ata_phys_link_offline(struct ata_link *link)
5186{
5187 u32 sstatus;
5188
5189 if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
5190 !ata_sstatus_online(sstatus))
5191 return true;
5192 return false;
5193}
5194
5195/**
5196 * ata_link_online - test whether the given link is online
5197 * @link: ATA link to test
5198 *
5199 * Test whether @link is online. This is identical to
5200 * ata_phys_link_online() when there's no slave link. When
5201 * there's a slave link, this function should only be called on
5202 * the master link and will return true if any of M/S links is
5203 * online.
5204 *
5205 * LOCKING:
5206 * None.
5207 *
5208 * RETURNS:
5209 * True if the port online status is available and online.
5210 */
5211bool ata_link_online(struct ata_link *link)
5212{
5213 struct ata_link *slave = link->ap->slave_link;
5214
5215 WARN_ON(link == slave); /* shouldn't be called on slave link */
5216
5217 return ata_phys_link_online(link) ||
5218 (slave && ata_phys_link_online(slave));
5219}
5220
5221/**
5222 * ata_link_offline - test whether the given link is offline
5223 * @link: ATA link to test
5224 *
5225 * Test whether @link is offline. This is identical to
5226 * ata_phys_link_offline() when there's no slave link. When
5227 * there's a slave link, this function should only be called on
5228 * the master link and will return true if both M/S links are
5229 * offline.
5230 *
5231 * LOCKING:
5232 * None.
5233 *
5234 * RETURNS:
5235 * True if the port offline status is available and offline.
5236 */
5237bool ata_link_offline(struct ata_link *link)
5238{
5239 struct ata_link *slave = link->ap->slave_link;
5240
5241 WARN_ON(link == slave); /* shouldn't be called on slave link */
5242
5243 return ata_phys_link_offline(link) &&
5244 (!slave || ata_phys_link_offline(slave));
5245}
5246
5247#ifdef CONFIG_PM
5248static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
5249 unsigned int action, unsigned int ehi_flags,
5250 int wait)
5251{
5252 struct ata_link *link;
5253 unsigned long flags;
5254 int rc;
5255
5256 /* Previous resume operation might still be in
5257 * progress. Wait for PM_PENDING to clear.
5258 */
5259 if (ap->pflags & ATA_PFLAG_PM_PENDING) {
5260 ata_port_wait_eh(ap);
5261 WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
5262 }
5263
5264 /* request PM ops to EH */
5265 spin_lock_irqsave(ap->lock, flags);
5266
5267 ap->pm_mesg = mesg;
5268 if (wait) {
5269 rc = 0;
5270 ap->pm_result = &rc;
5271 }
5272
5273 ap->pflags |= ATA_PFLAG_PM_PENDING;
5274 ata_for_each_link(link, ap, HOST_FIRST) {
5275 link->eh_info.action |= action;
5276 link->eh_info.flags |= ehi_flags;
5277 }
5278
5279 ata_port_schedule_eh(ap);
5280
5281 spin_unlock_irqrestore(ap->lock, flags);
5282
5283 /* wait and check result */
5284 if (wait) {
5285 ata_port_wait_eh(ap);
5286 WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
5287 }
5288
5289 return rc;
5290}
5291
5292#define to_ata_port(d) container_of(d, struct ata_port, tdev)
5293
5294static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
5295{
5296 struct ata_port *ap = to_ata_port(dev);
5297 unsigned int ehi_flags = ATA_EHI_QUIET;
5298 int rc;
5299
5300 /*
5301 * On some hardware, device fails to respond after spun down
5302 * for suspend. As the device won't be used before being
5303 * resumed, we don't need to touch the device. Ask EH to skip
5304 * the usual stuff and proceed directly to suspend.
5305 *
5306 * http://thread.gmane.org/gmane.linux.ide/46764
5307 */
5308 if (mesg.event == PM_EVENT_SUSPEND)
5309 ehi_flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_NO_RECOVERY;
5310
5311 rc = ata_port_request_pm(ap, mesg, 0, ehi_flags, 1);
5312 return rc;
5313}
5314
5315static int ata_port_suspend(struct device *dev)
5316{
5317 if (pm_runtime_suspended(dev))
5318 return 0;
5319
5320 return ata_port_suspend_common(dev, PMSG_SUSPEND);
5321}
5322
5323static int ata_port_do_freeze(struct device *dev)
5324{
5325 if (pm_runtime_suspended(dev))
5326 pm_runtime_resume(dev);
5327
5328 return ata_port_suspend_common(dev, PMSG_FREEZE);
5329}
5330
5331static int ata_port_poweroff(struct device *dev)
5332{
5333 if (pm_runtime_suspended(dev))
5334 return 0;
5335
5336 return ata_port_suspend_common(dev, PMSG_HIBERNATE);
5337}
5338
5339static int ata_port_resume_common(struct device *dev)
5340{
5341 struct ata_port *ap = to_ata_port(dev);
5342 int rc;
5343
5344 rc = ata_port_request_pm(ap, PMSG_ON, ATA_EH_RESET,
5345 ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 1);
5346 return rc;
5347}
5348
5349static int ata_port_resume(struct device *dev)
5350{
5351 int rc;
5352
5353 rc = ata_port_resume_common(dev);
5354 if (!rc) {
5355 pm_runtime_disable(dev);
5356 pm_runtime_set_active(dev);
5357 pm_runtime_enable(dev);
5358 }
5359
5360 return rc;
5361}
5362
5363static int ata_port_runtime_idle(struct device *dev)
5364{
5365 return pm_runtime_suspend(dev);
5366}
5367
5368static const struct dev_pm_ops ata_port_pm_ops = {
5369 .suspend = ata_port_suspend,
5370 .resume = ata_port_resume,
5371 .freeze = ata_port_do_freeze,
5372 .thaw = ata_port_resume,
5373 .poweroff = ata_port_poweroff,
5374 .restore = ata_port_resume,
5375
5376 .runtime_suspend = ata_port_suspend,
5377 .runtime_resume = ata_port_resume_common,
5378 .runtime_idle = ata_port_runtime_idle,
5379};
5380
5381/**
5382 * ata_host_suspend - suspend host
5383 * @host: host to suspend
5384 * @mesg: PM message
5385 *
5386 * Suspend @host. Actual operation is performed by port suspend.
5387 */
5388int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
5389{
5390 host->dev->power.power_state = mesg;
5391 return 0;
5392}
5393
5394/**
5395 * ata_host_resume - resume host
5396 * @host: host to resume
5397 *
5398 * Resume @host. Actual operation is performed by port resume.
5399 */
5400void ata_host_resume(struct ata_host *host)
5401{
5402 host->dev->power.power_state = PMSG_ON;
5403}
5404#endif
5405
5406struct device_type ata_port_type = {
5407 .name = "ata_port",
5408#ifdef CONFIG_PM
5409 .pm = &ata_port_pm_ops,
5410#endif
5411};
5412
5413/**
5414 * ata_dev_init - Initialize an ata_device structure
5415 * @dev: Device structure to initialize
5416 *
5417 * Initialize @dev in preparation for probing.
5418 *
5419 * LOCKING:
5420 * Inherited from caller.
5421 */
5422void ata_dev_init(struct ata_device *dev)
5423{
5424 struct ata_link *link = ata_dev_phys_link(dev);
5425 struct ata_port *ap = link->ap;
5426 unsigned long flags;
5427
5428 /* SATA spd limit is bound to the attached device, reset together */
5429 link->sata_spd_limit = link->hw_sata_spd_limit;
5430 link->sata_spd = 0;
5431
5432 /* High bits of dev->flags are used to record warm plug
5433 * requests which occur asynchronously. Synchronize using
5434 * host lock.
5435 */
5436 spin_lock_irqsave(ap->lock, flags);
5437 dev->flags &= ~ATA_DFLAG_INIT_MASK;
5438 dev->horkage = 0;
5439 spin_unlock_irqrestore(ap->lock, flags);
5440
5441 memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0,
5442 ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN);
5443 dev->pio_mask = UINT_MAX;
5444 dev->mwdma_mask = UINT_MAX;
5445 dev->udma_mask = UINT_MAX;
5446}
5447
5448/**
5449 * ata_link_init - Initialize an ata_link structure
5450 * @ap: ATA port link is attached to
5451 * @link: Link structure to initialize
5452 * @pmp: Port multiplier port number
5453 *
5454 * Initialize @link.
5455 *
5456 * LOCKING:
5457 * Kernel thread context (may sleep)
5458 */
5459void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
5460{
5461 int i;
5462
5463 /* clear everything except for devices */
5464 memset((void *)link + ATA_LINK_CLEAR_BEGIN, 0,
5465 ATA_LINK_CLEAR_END - ATA_LINK_CLEAR_BEGIN);
5466
5467 link->ap = ap;
5468 link->pmp = pmp;
5469 link->active_tag = ATA_TAG_POISON;
5470 link->hw_sata_spd_limit = UINT_MAX;
5471
5472 /* can't use iterator, ap isn't initialized yet */
5473 for (i = 0; i < ATA_MAX_DEVICES; i++) {
5474 struct ata_device *dev = &link->device[i];
5475
5476 dev->link = link;
5477 dev->devno = dev - link->device;
5478#ifdef CONFIG_ATA_ACPI
5479 dev->gtf_filter = ata_acpi_gtf_filter;
5480#endif
5481 ata_dev_init(dev);
5482 }
5483}
5484
5485/**
5486 * sata_link_init_spd - Initialize link->sata_spd_limit
5487 * @link: Link to configure sata_spd_limit for
5488 *
5489 * Initialize @link->[hw_]sata_spd_limit to the currently
5490 * configured value.
5491 *
5492 * LOCKING:
5493 * Kernel thread context (may sleep).
5494 *
5495 * RETURNS:
5496 * 0 on success, -errno on failure.
5497 */
5498int sata_link_init_spd(struct ata_link *link)
5499{
5500 u8 spd;
5501 int rc;
5502
5503 rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
5504 if (rc)
5505 return rc;
5506
5507 spd = (link->saved_scontrol >> 4) & 0xf;
5508 if (spd)
5509 link->hw_sata_spd_limit &= (1 << spd) - 1;
5510
5511 ata_force_link_limits(link);
5512
5513 link->sata_spd_limit = link->hw_sata_spd_limit;
5514
5515 return 0;
5516}
5517
5518/**
5519 * ata_port_alloc - allocate and initialize basic ATA port resources
5520 * @host: ATA host this allocated port belongs to
5521 *
5522 * Allocate and initialize basic ATA port resources.
5523 *
5524 * RETURNS:
5525 * Allocate ATA port on success, NULL on failure.
5526 *
5527 * LOCKING:
5528 * Inherited from calling layer (may sleep).
5529 */
5530struct ata_port *ata_port_alloc(struct ata_host *host)
5531{
5532 struct ata_port *ap;
5533
5534 DPRINTK("ENTER\n");
5535
5536 ap = kzalloc(sizeof(*ap), GFP_KERNEL);
5537 if (!ap)
5538 return NULL;
5539
5540 ap->pflags |= ATA_PFLAG_INITIALIZING | ATA_PFLAG_FROZEN;
5541 ap->lock = &host->lock;
5542 ap->print_id = -1;
5543 ap->host = host;
5544 ap->dev = host->dev;
5545
5546#if defined(ATA_VERBOSE_DEBUG)
5547 /* turn on all debugging levels */
5548 ap->msg_enable = 0x00FF;
5549#elif defined(ATA_DEBUG)
5550 ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR;
5551#else
5552 ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
5553#endif
5554
5555 mutex_init(&ap->scsi_scan_mutex);
5556 INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
5557 INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
5558 INIT_LIST_HEAD(&ap->eh_done_q);
5559 init_waitqueue_head(&ap->eh_wait_q);
5560 init_completion(&ap->park_req_pending);
5561 init_timer_deferrable(&ap->fastdrain_timer);
5562 ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn;
5563 ap->fastdrain_timer.data = (unsigned long)ap;
5564
5565 ap->cbl = ATA_CBL_NONE;
5566
5567 ata_link_init(ap, &ap->link, 0);
5568
5569#ifdef ATA_IRQ_TRAP
5570 ap->stats.unhandled_irq = 1;
5571 ap->stats.idle_irq = 1;
5572#endif
5573 ata_sff_port_init(ap);
5574
5575 return ap;
5576}
5577
5578static void ata_host_release(struct device *gendev, void *res)
5579{
5580 struct ata_host *host = dev_get_drvdata(gendev);
5581 int i;
5582
5583 for (i = 0; i < host->n_ports; i++) {
5584 struct ata_port *ap = host->ports[i];
5585
5586 if (!ap)
5587 continue;
5588
5589 if (ap->scsi_host)
5590 scsi_host_put(ap->scsi_host);
5591
5592 kfree(ap->pmp_link);
5593 kfree(ap->slave_link);
5594 kfree(ap);
5595 host->ports[i] = NULL;
5596 }
5597
5598 dev_set_drvdata(gendev, NULL);
5599}
5600
5601/**
5602 * ata_host_alloc - allocate and init basic ATA host resources
5603 * @dev: generic device this host is associated with
5604 * @max_ports: maximum number of ATA ports associated with this host
5605 *
5606 * Allocate and initialize basic ATA host resources. LLD calls
5607 * this function to allocate a host, initializes it fully and
5608 * attaches it using ata_host_register().
5609 *
5610 * @max_ports ports are allocated and host->n_ports is
5611 * initialized to @max_ports. The caller is allowed to decrease
5612 * host->n_ports before calling ata_host_register(). The unused
5613 * ports will be automatically freed on registration.
5614 *
5615 * RETURNS:
5616 * Allocate ATA host on success, NULL on failure.
5617 *
5618 * LOCKING:
5619 * Inherited from calling layer (may sleep).
5620 */
5621struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
5622{
5623 struct ata_host *host;
5624 size_t sz;
5625 int i;
5626
5627 DPRINTK("ENTER\n");
5628
5629 if (!devres_open_group(dev, NULL, GFP_KERNEL))
5630 return NULL;
5631
5632 /* alloc a container for our list of ATA ports (buses) */
5633 sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *);
5634 /* alloc a container for our list of ATA ports (buses) */
5635 host = devres_alloc(ata_host_release, sz, GFP_KERNEL);
5636 if (!host)
5637 goto err_out;
5638
5639 devres_add(dev, host);
5640 dev_set_drvdata(dev, host);
5641
5642 spin_lock_init(&host->lock);
5643 mutex_init(&host->eh_mutex);
5644 host->dev = dev;
5645 host->n_ports = max_ports;
5646
5647 /* allocate ports bound to this host */
5648 for (i = 0; i < max_ports; i++) {
5649 struct ata_port *ap;
5650
5651 ap = ata_port_alloc(host);
5652 if (!ap)
5653 goto err_out;
5654
5655 ap->port_no = i;
5656 host->ports[i] = ap;
5657 }
5658
5659 devres_remove_group(dev, NULL);
5660 return host;
5661
5662 err_out:
5663 devres_release_group(dev, NULL);
5664 return NULL;
5665}
5666
5667/**
5668 * ata_host_alloc_pinfo - alloc host and init with port_info array
5669 * @dev: generic device this host is associated with
5670 * @ppi: array of ATA port_info to initialize host with
5671 * @n_ports: number of ATA ports attached to this host
5672 *
5673 * Allocate ATA host and initialize with info from @ppi. If NULL
5674 * terminated, @ppi may contain fewer entries than @n_ports. The
5675 * last entry will be used for the remaining ports.
5676 *
5677 * RETURNS:
5678 * Allocate ATA host on success, NULL on failure.
5679 *
5680 * LOCKING:
5681 * Inherited from calling layer (may sleep).
5682 */
5683struct ata_host *ata_host_alloc_pinfo(struct device *dev,
5684 const struct ata_port_info * const * ppi,
5685 int n_ports)
5686{
5687 const struct ata_port_info *pi;
5688 struct ata_host *host;
5689 int i, j;
5690
5691 host = ata_host_alloc(dev, n_ports);
5692 if (!host)
5693 return NULL;
5694
5695 for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) {
5696 struct ata_port *ap = host->ports[i];
5697
5698 if (ppi[j])
5699 pi = ppi[j++];
5700
5701 ap->pio_mask = pi->pio_mask;
5702 ap->mwdma_mask = pi->mwdma_mask;
5703 ap->udma_mask = pi->udma_mask;
5704 ap->flags |= pi->flags;
5705 ap->link.flags |= pi->link_flags;
5706 ap->ops = pi->port_ops;
5707
5708 if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
5709 host->ops = pi->port_ops;
5710 }
5711
5712 return host;
5713}
5714
5715/**
5716 * ata_slave_link_init - initialize slave link
5717 * @ap: port to initialize slave link for
5718 *
5719 * Create and initialize slave link for @ap. This enables slave
5720 * link handling on the port.
5721 *
5722 * In libata, a port contains links and a link contains devices.
5723 * There is single host link but if a PMP is attached to it,
5724 * there can be multiple fan-out links. On SATA, there's usually
5725 * a single device connected to a link but PATA and SATA
5726 * controllers emulating TF based interface can have two - master
5727 * and slave.
5728 *
5729 * However, there are a few controllers which don't fit into this
5730 * abstraction too well - SATA controllers which emulate TF
5731 * interface with both master and slave devices but also have
5732 * separate SCR register sets for each device. These controllers
5733 * need separate links for physical link handling
5734 * (e.g. onlineness, link speed) but should be treated like a
5735 * traditional M/S controller for everything else (e.g. command
5736 * issue, softreset).
5737 *
5738 * slave_link is libata's way of handling this class of
5739 * controllers without impacting core layer too much. For
5740 * anything other than physical link handling, the default host
5741 * link is used for both master and slave. For physical link
5742 * handling, separate @ap->slave_link is used. All dirty details
5743 * are implemented inside libata core layer. From LLD's POV, the
5744 * only difference is that prereset, hardreset and postreset are
5745 * called once more for the slave link, so the reset sequence
5746 * looks like the following.
5747 *
5748 * prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) ->
5749 * softreset(M) -> postreset(M) -> postreset(S)
5750 *
5751 * Note that softreset is called only for the master. Softreset
5752 * resets both M/S by definition, so SRST on master should handle
5753 * both (the standard method will work just fine).
5754 *
5755 * LOCKING:
5756 * Should be called before host is registered.
5757 *
5758 * RETURNS:
5759 * 0 on success, -errno on failure.
5760 */
5761int ata_slave_link_init(struct ata_port *ap)
5762{
5763 struct ata_link *link;
5764
5765 WARN_ON(ap->slave_link);
5766 WARN_ON(ap->flags & ATA_FLAG_PMP);
5767
5768 link = kzalloc(sizeof(*link), GFP_KERNEL);
5769 if (!link)
5770 return -ENOMEM;
5771
5772 ata_link_init(ap, link, 1);
5773 ap->slave_link = link;
5774 return 0;
5775}
5776
5777static void ata_host_stop(struct device *gendev, void *res)
5778{
5779 struct ata_host *host = dev_get_drvdata(gendev);
5780 int i;
5781
5782 WARN_ON(!(host->flags & ATA_HOST_STARTED));
5783
5784 for (i = 0; i < host->n_ports; i++) {
5785 struct ata_port *ap = host->ports[i];
5786
5787 if (ap->ops->port_stop)
5788 ap->ops->port_stop(ap);
5789 }
5790
5791 if (host->ops->host_stop)
5792 host->ops->host_stop(host);
5793}
5794
5795/**
5796 * ata_finalize_port_ops - finalize ata_port_operations
5797 * @ops: ata_port_operations to finalize
5798 *
5799 * An ata_port_operations can inherit from another ops and that
5800 * ops can again inherit from another. This can go on as many
5801 * times as necessary as long as there is no loop in the
5802 * inheritance chain.
5803 *
5804 * Ops tables are finalized when the host is started. NULL or
5805 * unspecified entries are inherited from the closet ancestor
5806 * which has the method and the entry is populated with it.
5807 * After finalization, the ops table directly points to all the
5808 * methods and ->inherits is no longer necessary and cleared.
5809 *
5810 * Using ATA_OP_NULL, inheriting ops can force a method to NULL.
5811 *
5812 * LOCKING:
5813 * None.
5814 */
5815static void ata_finalize_port_ops(struct ata_port_operations *ops)
5816{
5817 static DEFINE_SPINLOCK(lock);
5818 const struct ata_port_operations *cur;
5819 void **begin = (void **)ops;
5820 void **end = (void **)&ops->inherits;
5821 void **pp;
5822
5823 if (!ops || !ops->inherits)
5824 return;
5825
5826 spin_lock(&lock);
5827
5828 for (cur = ops->inherits; cur; cur = cur->inherits) {
5829 void **inherit = (void **)cur;
5830
5831 for (pp = begin; pp < end; pp++, inherit++)
5832 if (!*pp)
5833 *pp = *inherit;
5834 }
5835
5836 for (pp = begin; pp < end; pp++)
5837 if (IS_ERR(*pp))
5838 *pp = NULL;
5839
5840 ops->inherits = NULL;
5841
5842 spin_unlock(&lock);
5843}
5844
5845/**
5846 * ata_host_start - start and freeze ports of an ATA host
5847 * @host: ATA host to start ports for
5848 *
5849 * Start and then freeze ports of @host. Started status is
5850 * recorded in host->flags, so this function can be called
5851 * multiple times. Ports are guaranteed to get started only
5852 * once. If host->ops isn't initialized yet, its set to the
5853 * first non-dummy port ops.
5854 *
5855 * LOCKING:
5856 * Inherited from calling layer (may sleep).
5857 *
5858 * RETURNS:
5859 * 0 if all ports are started successfully, -errno otherwise.
5860 */
5861int ata_host_start(struct ata_host *host)
5862{
5863 int have_stop = 0;
5864 void *start_dr = NULL;
5865 int i, rc;
5866
5867 if (host->flags & ATA_HOST_STARTED)
5868 return 0;
5869
5870 ata_finalize_port_ops(host->ops);
5871
5872 for (i = 0; i < host->n_ports; i++) {
5873 struct ata_port *ap = host->ports[i];
5874
5875 ata_finalize_port_ops(ap->ops);
5876
5877 if (!host->ops && !ata_port_is_dummy(ap))
5878 host->ops = ap->ops;
5879
5880 if (ap->ops->port_stop)
5881 have_stop = 1;
5882 }
5883
5884 if (host->ops->host_stop)
5885 have_stop = 1;
5886
5887 if (have_stop) {
5888 start_dr = devres_alloc(ata_host_stop, 0, GFP_KERNEL);
5889 if (!start_dr)
5890 return -ENOMEM;
5891 }
5892
5893 for (i = 0; i < host->n_ports; i++) {
5894 struct ata_port *ap = host->ports[i];
5895
5896 if (ap->ops->port_start) {
5897 rc = ap->ops->port_start(ap);
5898 if (rc) {
5899 if (rc != -ENODEV)
5900 dev_err(host->dev,
5901 "failed to start port %d (errno=%d)\n",
5902 i, rc);
5903 goto err_out;
5904 }
5905 }
5906 ata_eh_freeze_port(ap);
5907 }
5908
5909 if (start_dr)
5910 devres_add(host->dev, start_dr);
5911 host->flags |= ATA_HOST_STARTED;
5912 return 0;
5913
5914 err_out:
5915 while (--i >= 0) {
5916 struct ata_port *ap = host->ports[i];
5917
5918 if (ap->ops->port_stop)
5919 ap->ops->port_stop(ap);
5920 }
5921 devres_free(start_dr);
5922 return rc;
5923}
5924
5925/**
5926 * ata_sas_host_init - Initialize a host struct
5927 * @host: host to initialize
5928 * @dev: device host is attached to
5929 * @flags: host flags
5930 * @ops: port_ops
5931 *
5932 * LOCKING:
5933 * PCI/etc. bus probe sem.
5934 *
5935 */
5936/* KILLME - the only user left is ipr */
5937void ata_host_init(struct ata_host *host, struct device *dev,
5938 unsigned long flags, struct ata_port_operations *ops)
5939{
5940 spin_lock_init(&host->lock);
5941 mutex_init(&host->eh_mutex);
5942 host->dev = dev;
5943 host->flags = flags;
5944 host->ops = ops;
5945}
5946
5947void __ata_port_probe(struct ata_port *ap)
5948{
5949 struct ata_eh_info *ehi = &ap->link.eh_info;
5950 unsigned long flags;
5951
5952 /* kick EH for boot probing */
5953 spin_lock_irqsave(ap->lock, flags);
5954
5955 ehi->probe_mask |= ATA_ALL_DEVICES;
5956 ehi->action |= ATA_EH_RESET;
5957 ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
5958
5959 ap->pflags &= ~ATA_PFLAG_INITIALIZING;
5960 ap->pflags |= ATA_PFLAG_LOADING;
5961 ata_port_schedule_eh(ap);
5962
5963 spin_unlock_irqrestore(ap->lock, flags);
5964}
5965
5966int ata_port_probe(struct ata_port *ap)
5967{
5968 int rc = 0;
5969
5970 if (ap->ops->error_handler) {
5971 __ata_port_probe(ap);
5972 ata_port_wait_eh(ap);
5973 } else {
5974 DPRINTK("ata%u: bus probe begin\n", ap->print_id);
5975 rc = ata_bus_probe(ap);
5976 DPRINTK("ata%u: bus probe end\n", ap->print_id);
5977 }
5978 return rc;
5979}
5980
5981
5982static void async_port_probe(void *data, async_cookie_t cookie)
5983{
5984 struct ata_port *ap = data;
5985
5986 /*
5987 * If we're not allowed to scan this host in parallel,
5988 * we need to wait until all previous scans have completed
5989 * before going further.
5990 * Jeff Garzik says this is only within a controller, so we
5991 * don't need to wait for port 0, only for later ports.
5992 */
5993 if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0)
5994 async_synchronize_cookie(cookie);
5995
5996 (void)ata_port_probe(ap);
5997
5998 /* in order to keep device order, we need to synchronize at this point */
5999 async_synchronize_cookie(cookie);
6000
6001 ata_scsi_scan_host(ap, 1);
6002}
6003
6004/**
6005 * ata_host_register - register initialized ATA host
6006 * @host: ATA host to register
6007 * @sht: template for SCSI host
6008 *
6009 * Register initialized ATA host. @host is allocated using
6010 * ata_host_alloc() and fully initialized by LLD. This function
6011 * starts ports, registers @host with ATA and SCSI layers and
6012 * probe registered devices.
6013 *
6014 * LOCKING:
6015 * Inherited from calling layer (may sleep).
6016 *
6017 * RETURNS:
6018 * 0 on success, -errno otherwise.
6019 */
6020int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
6021{
6022 int i, rc;
6023
6024 /* host must have been started */
6025 if (!(host->flags & ATA_HOST_STARTED)) {
6026 dev_err(host->dev, "BUG: trying to register unstarted host\n");
6027 WARN_ON(1);
6028 return -EINVAL;
6029 }
6030
6031 /* Blow away unused ports. This happens when LLD can't
6032 * determine the exact number of ports to allocate at
6033 * allocation time.
6034 */
6035 for (i = host->n_ports; host->ports[i]; i++)
6036 kfree(host->ports[i]);
6037
6038 /* give ports names and add SCSI hosts */
6039 for (i = 0; i < host->n_ports; i++)
6040 host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
6041
6042
6043 /* Create associated sysfs transport objects */
6044 for (i = 0; i < host->n_ports; i++) {
6045 rc = ata_tport_add(host->dev,host->ports[i]);
6046 if (rc) {
6047 goto err_tadd;
6048 }
6049 }
6050
6051 rc = ata_scsi_add_hosts(host, sht);
6052 if (rc)
6053 goto err_tadd;
6054
6055 /* associate with ACPI nodes */
6056 ata_acpi_associate(host);
6057
6058 /* set cable, sata_spd_limit and report */
6059 for (i = 0; i < host->n_ports; i++) {
6060 struct ata_port *ap = host->ports[i];
6061 unsigned long xfer_mask;
6062
6063 /* set SATA cable type if still unset */
6064 if (ap->cbl == ATA_CBL_NONE && (ap->flags & ATA_FLAG_SATA))
6065 ap->cbl = ATA_CBL_SATA;
6066
6067 /* init sata_spd_limit to the current value */
6068 sata_link_init_spd(&ap->link);
6069 if (ap->slave_link)
6070 sata_link_init_spd(ap->slave_link);
6071
6072 /* print per-port info to dmesg */
6073 xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
6074 ap->udma_mask);
6075
6076 if (!ata_port_is_dummy(ap)) {
6077 ata_port_info(ap, "%cATA max %s %s\n",
6078 (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P',
6079 ata_mode_string(xfer_mask),
6080 ap->link.eh_info.desc);
6081 ata_ehi_clear_desc(&ap->link.eh_info);
6082 } else
6083 ata_port_info(ap, "DUMMY\n");
6084 }
6085
6086 /* perform each probe asynchronously */
6087 for (i = 0; i < host->n_ports; i++) {
6088 struct ata_port *ap = host->ports[i];
6089 async_schedule(async_port_probe, ap);
6090 }
6091
6092 return 0;
6093
6094 err_tadd:
6095 while (--i >= 0) {
6096 ata_tport_delete(host->ports[i]);
6097 }
6098 return rc;
6099
6100}
6101
6102/**
6103 * ata_host_activate - start host, request IRQ and register it
6104 * @host: target ATA host
6105 * @irq: IRQ to request
6106 * @irq_handler: irq_handler used when requesting IRQ
6107 * @irq_flags: irq_flags used when requesting IRQ
6108 * @sht: scsi_host_template to use when registering the host
6109 *
6110 * After allocating an ATA host and initializing it, most libata
6111 * LLDs perform three steps to activate the host - start host,
6112 * request IRQ and register it. This helper takes necessasry
6113 * arguments and performs the three steps in one go.
6114 *
6115 * An invalid IRQ skips the IRQ registration and expects the host to
6116 * have set polling mode on the port. In this case, @irq_handler
6117 * should be NULL.
6118 *
6119 * LOCKING:
6120 * Inherited from calling layer (may sleep).
6121 *
6122 * RETURNS:
6123 * 0 on success, -errno otherwise.
6124 */
6125int ata_host_activate(struct ata_host *host, int irq,
6126 irq_handler_t irq_handler, unsigned long irq_flags,
6127 struct scsi_host_template *sht)
6128{
6129 int i, rc;
6130
6131 rc = ata_host_start(host);
6132 if (rc)
6133 return rc;
6134
6135 /* Special case for polling mode */
6136 if (!irq) {
6137 WARN_ON(irq_handler);
6138 return ata_host_register(host, sht);
6139 }
6140
6141 rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags,
6142 dev_driver_string(host->dev), host);
6143 if (rc)
6144 return rc;
6145
6146 for (i = 0; i < host->n_ports; i++)
6147 ata_port_desc(host->ports[i], "irq %d", irq);
6148
6149 rc = ata_host_register(host, sht);
6150 /* if failed, just free the IRQ and leave ports alone */
6151 if (rc)
6152 devm_free_irq(host->dev, irq, host);
6153
6154 return rc;
6155}
6156
6157/**
6158 * ata_port_detach - Detach ATA port in prepration of device removal
6159 * @ap: ATA port to be detached
6160 *
6161 * Detach all ATA devices and the associated SCSI devices of @ap;
6162 * then, remove the associated SCSI host. @ap is guaranteed to
6163 * be quiescent on return from this function.
6164 *
6165 * LOCKING:
6166 * Kernel thread context (may sleep).
6167 */
6168static void ata_port_detach(struct ata_port *ap)
6169{
6170 unsigned long flags;
6171
6172 if (!ap->ops->error_handler)
6173 goto skip_eh;
6174
6175 /* tell EH we're leaving & flush EH */
6176 spin_lock_irqsave(ap->lock, flags);
6177 ap->pflags |= ATA_PFLAG_UNLOADING;
6178 ata_port_schedule_eh(ap);
6179 spin_unlock_irqrestore(ap->lock, flags);
6180
6181 /* wait till EH commits suicide */
6182 ata_port_wait_eh(ap);
6183
6184 /* it better be dead now */
6185 WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED));
6186
6187 cancel_delayed_work_sync(&ap->hotplug_task);
6188
6189 skip_eh:
6190 if (ap->pmp_link) {
6191 int i;
6192 for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
6193 ata_tlink_delete(&ap->pmp_link[i]);
6194 }
6195 ata_tport_delete(ap);
6196
6197 /* remove the associated SCSI host */
6198 scsi_remove_host(ap->scsi_host);
6199}
6200
6201/**
6202 * ata_host_detach - Detach all ports of an ATA host
6203 * @host: Host to detach
6204 *
6205 * Detach all ports of @host.
6206 *
6207 * LOCKING:
6208 * Kernel thread context (may sleep).
6209 */
6210void ata_host_detach(struct ata_host *host)
6211{
6212 int i;
6213
6214 for (i = 0; i < host->n_ports; i++)
6215 ata_port_detach(host->ports[i]);
6216
6217 /* the host is dead now, dissociate ACPI */
6218 ata_acpi_dissociate(host);
6219}
6220
6221#ifdef CONFIG_PCI
6222
6223/**
6224 * ata_pci_remove_one - PCI layer callback for device removal
6225 * @pdev: PCI device that was removed
6226 *
6227 * PCI layer indicates to libata via this hook that hot-unplug or
6228 * module unload event has occurred. Detach all ports. Resource
6229 * release is handled via devres.
6230 *
6231 * LOCKING:
6232 * Inherited from PCI layer (may sleep).
6233 */
6234void ata_pci_remove_one(struct pci_dev *pdev)
6235{
6236 struct device *dev = &pdev->dev;
6237 struct ata_host *host = dev_get_drvdata(dev);
6238
6239 ata_host_detach(host);
6240}
6241
6242/* move to PCI subsystem */
6243int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
6244{
6245 unsigned long tmp = 0;
6246
6247 switch (bits->width) {
6248 case 1: {
6249 u8 tmp8 = 0;
6250 pci_read_config_byte(pdev, bits->reg, &tmp8);
6251 tmp = tmp8;
6252 break;
6253 }
6254 case 2: {
6255 u16 tmp16 = 0;
6256 pci_read_config_word(pdev, bits->reg, &tmp16);
6257 tmp = tmp16;
6258 break;
6259 }
6260 case 4: {
6261 u32 tmp32 = 0;
6262 pci_read_config_dword(pdev, bits->reg, &tmp32);
6263 tmp = tmp32;
6264 break;
6265 }
6266
6267 default:
6268 return -EINVAL;
6269 }
6270
6271 tmp &= bits->mask;
6272
6273 return (tmp == bits->val) ? 1 : 0;
6274}
6275
6276#ifdef CONFIG_PM
6277void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
6278{
6279 pci_save_state(pdev);
6280 pci_disable_device(pdev);
6281
6282 if (mesg.event & PM_EVENT_SLEEP)
6283 pci_set_power_state(pdev, PCI_D3hot);
6284}
6285
6286int ata_pci_device_do_resume(struct pci_dev *pdev)
6287{
6288 int rc;
6289
6290 pci_set_power_state(pdev, PCI_D0);
6291 pci_restore_state(pdev);
6292
6293 rc = pcim_enable_device(pdev);
6294 if (rc) {
6295 dev_err(&pdev->dev,
6296 "failed to enable device after resume (%d)\n", rc);
6297 return rc;
6298 }
6299
6300 pci_set_master(pdev);
6301 return 0;
6302}
6303
6304int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
6305{
6306 struct ata_host *host = dev_get_drvdata(&pdev->dev);
6307 int rc = 0;
6308
6309 rc = ata_host_suspend(host, mesg);
6310 if (rc)
6311 return rc;
6312
6313 ata_pci_device_do_suspend(pdev, mesg);
6314
6315 return 0;
6316}
6317
6318int ata_pci_device_resume(struct pci_dev *pdev)
6319{
6320 struct ata_host *host = dev_get_drvdata(&pdev->dev);
6321 int rc;
6322
6323 rc = ata_pci_device_do_resume(pdev);
6324 if (rc == 0)
6325 ata_host_resume(host);
6326 return rc;
6327}
6328#endif /* CONFIG_PM */
6329
6330#endif /* CONFIG_PCI */
6331
6332static int __init ata_parse_force_one(char **cur,
6333 struct ata_force_ent *force_ent,
6334 const char **reason)
6335{
6336 /* FIXME: Currently, there's no way to tag init const data and
6337 * using __initdata causes build failure on some versions of
6338 * gcc. Once __initdataconst is implemented, add const to the
6339 * following structure.
6340 */
6341 static struct ata_force_param force_tbl[] __initdata = {
6342 { "40c", .cbl = ATA_CBL_PATA40 },
6343 { "80c", .cbl = ATA_CBL_PATA80 },
6344 { "short40c", .cbl = ATA_CBL_PATA40_SHORT },
6345 { "unk", .cbl = ATA_CBL_PATA_UNK },
6346 { "ign", .cbl = ATA_CBL_PATA_IGN },
6347 { "sata", .cbl = ATA_CBL_SATA },
6348 { "1.5Gbps", .spd_limit = 1 },
6349 { "3.0Gbps", .spd_limit = 2 },
6350 { "noncq", .horkage_on = ATA_HORKAGE_NONCQ },
6351 { "ncq", .horkage_off = ATA_HORKAGE_NONCQ },
6352 { "dump_id", .horkage_on = ATA_HORKAGE_DUMP_ID },
6353 { "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) },
6354 { "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) },
6355 { "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) },
6356 { "pio3", .xfer_mask = 1 << (ATA_SHIFT_PIO + 3) },
6357 { "pio4", .xfer_mask = 1 << (ATA_SHIFT_PIO + 4) },
6358 { "pio5", .xfer_mask = 1 << (ATA_SHIFT_PIO + 5) },
6359 { "pio6", .xfer_mask = 1 << (ATA_SHIFT_PIO + 6) },
6360 { "mwdma0", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 0) },
6361 { "mwdma1", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 1) },
6362 { "mwdma2", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 2) },
6363 { "mwdma3", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 3) },
6364 { "mwdma4", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 4) },
6365 { "udma0", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
6366 { "udma16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
6367 { "udma/16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
6368 { "udma1", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
6369 { "udma25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
6370 { "udma/25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
6371 { "udma2", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
6372 { "udma33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
6373 { "udma/33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
6374 { "udma3", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
6375 { "udma44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
6376 { "udma/44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
6377 { "udma4", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
6378 { "udma66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
6379 { "udma/66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
6380 { "udma5", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
6381 { "udma100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
6382 { "udma/100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
6383 { "udma6", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
6384 { "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
6385 { "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
6386 { "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) },
6387 { "nohrst", .lflags = ATA_LFLAG_NO_HRST },
6388 { "nosrst", .lflags = ATA_LFLAG_NO_SRST },
6389 { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
6390 };
6391 char *start = *cur, *p = *cur;
6392 char *id, *val, *endp;
6393 const struct ata_force_param *match_fp = NULL;
6394 int nr_matches = 0, i;
6395
6396 /* find where this param ends and update *cur */
6397 while (*p != '\0' && *p != ',')
6398 p++;
6399
6400 if (*p == '\0')
6401 *cur = p;
6402 else
6403 *cur = p + 1;
6404
6405 *p = '\0';
6406
6407 /* parse */
6408 p = strchr(start, ':');
6409 if (!p) {
6410 val = strstrip(start);
6411 goto parse_val;
6412 }
6413 *p = '\0';
6414
6415 id = strstrip(start);
6416 val = strstrip(p + 1);
6417
6418 /* parse id */
6419 p = strchr(id, '.');
6420 if (p) {
6421 *p++ = '\0';
6422 force_ent->device = simple_strtoul(p, &endp, 10);
6423 if (p == endp || *endp != '\0') {
6424 *reason = "invalid device";
6425 return -EINVAL;
6426 }
6427 }
6428
6429 force_ent->port = simple_strtoul(id, &endp, 10);
6430 if (p == endp || *endp != '\0') {
6431 *reason = "invalid port/link";
6432 return -EINVAL;
6433 }
6434
6435 parse_val:
6436 /* parse val, allow shortcuts so that both 1.5 and 1.5Gbps work */
6437 for (i = 0; i < ARRAY_SIZE(force_tbl); i++) {
6438 const struct ata_force_param *fp = &force_tbl[i];
6439
6440 if (strncasecmp(val, fp->name, strlen(val)))
6441 continue;
6442
6443 nr_matches++;
6444 match_fp = fp;
6445
6446 if (strcasecmp(val, fp->name) == 0) {
6447 nr_matches = 1;
6448 break;
6449 }
6450 }
6451
6452 if (!nr_matches) {
6453 *reason = "unknown value";
6454 return -EINVAL;
6455 }
6456 if (nr_matches > 1) {
6457 *reason = "ambigious value";
6458 return -EINVAL;
6459 }
6460
6461 force_ent->param = *match_fp;
6462
6463 return 0;
6464}
6465
6466static void __init ata_parse_force_param(void)
6467{
6468 int idx = 0, size = 1;
6469 int last_port = -1, last_device = -1;
6470 char *p, *cur, *next;
6471
6472 /* calculate maximum number of params and allocate force_tbl */
6473 for (p = ata_force_param_buf; *p; p++)
6474 if (*p == ',')
6475 size++;
6476
6477 ata_force_tbl = kzalloc(sizeof(ata_force_tbl[0]) * size, GFP_KERNEL);
6478 if (!ata_force_tbl) {
6479 printk(KERN_WARNING "ata: failed to extend force table, "
6480 "libata.force ignored\n");
6481 return;
6482 }
6483
6484 /* parse and populate the table */
6485 for (cur = ata_force_param_buf; *cur != '\0'; cur = next) {
6486 const char *reason = "";
6487 struct ata_force_ent te = { .port = -1, .device = -1 };
6488
6489 next = cur;
6490 if (ata_parse_force_one(&next, &te, &reason)) {
6491 printk(KERN_WARNING "ata: failed to parse force "
6492 "parameter \"%s\" (%s)\n",
6493 cur, reason);
6494 continue;
6495 }
6496
6497 if (te.port == -1) {
6498 te.port = last_port;
6499 te.device = last_device;
6500 }
6501
6502 ata_force_tbl[idx++] = te;
6503
6504 last_port = te.port;
6505 last_device = te.device;
6506 }
6507
6508 ata_force_tbl_size = idx;
6509}
6510
6511static int __init ata_init(void)
6512{
6513 int rc;
6514
6515 ata_parse_force_param();
6516
6517 rc = ata_sff_init();
6518 if (rc) {
6519 kfree(ata_force_tbl);
6520 return rc;
6521 }
6522
6523 libata_transport_init();
6524 ata_scsi_transport_template = ata_attach_transport();
6525 if (!ata_scsi_transport_template) {
6526 ata_sff_exit();
6527 rc = -ENOMEM;
6528 goto err_out;
6529 }
6530
6531 printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
6532 return 0;
6533
6534err_out:
6535 return rc;
6536}
6537
6538static void __exit ata_exit(void)
6539{
6540 ata_release_transport(ata_scsi_transport_template);
6541 libata_transport_exit();
6542 ata_sff_exit();
6543 kfree(ata_force_tbl);
6544}
6545
6546subsys_initcall(ata_init);
6547module_exit(ata_exit);
6548
6549static DEFINE_RATELIMIT_STATE(ratelimit, HZ / 5, 1);
6550
6551int ata_ratelimit(void)
6552{
6553 return __ratelimit(&ratelimit);
6554}
6555
6556/**
6557 * ata_msleep - ATA EH owner aware msleep
6558 * @ap: ATA port to attribute the sleep to
6559 * @msecs: duration to sleep in milliseconds
6560 *
6561 * Sleeps @msecs. If the current task is owner of @ap's EH, the
6562 * ownership is released before going to sleep and reacquired
6563 * after the sleep is complete. IOW, other ports sharing the
6564 * @ap->host will be allowed to own the EH while this task is
6565 * sleeping.
6566 *
6567 * LOCKING:
6568 * Might sleep.
6569 */
6570void ata_msleep(struct ata_port *ap, unsigned int msecs)
6571{
6572 bool owns_eh = ap && ap->host->eh_owner == current;
6573
6574 if (owns_eh)
6575 ata_eh_release(ap);
6576
6577 msleep(msecs);
6578
6579 if (owns_eh)
6580 ata_eh_acquire(ap);
6581}
6582
6583/**
6584 * ata_wait_register - wait until register value changes
6585 * @ap: ATA port to wait register for, can be NULL
6586 * @reg: IO-mapped register
6587 * @mask: Mask to apply to read register value
6588 * @val: Wait condition
6589 * @interval: polling interval in milliseconds
6590 * @timeout: timeout in milliseconds
6591 *
6592 * Waiting for some bits of register to change is a common
6593 * operation for ATA controllers. This function reads 32bit LE
6594 * IO-mapped register @reg and tests for the following condition.
6595 *
6596 * (*@reg & mask) != val
6597 *
6598 * If the condition is met, it returns; otherwise, the process is
6599 * repeated after @interval_msec until timeout.
6600 *
6601 * LOCKING:
6602 * Kernel thread context (may sleep)
6603 *
6604 * RETURNS:
6605 * The final register value.
6606 */
6607u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val,
6608 unsigned long interval, unsigned long timeout)
6609{
6610 unsigned long deadline;
6611 u32 tmp;
6612
6613 tmp = ioread32(reg);
6614
6615 /* Calculate timeout _after_ the first read to make sure
6616 * preceding writes reach the controller before starting to
6617 * eat away the timeout.
6618 */
6619 deadline = ata_deadline(jiffies, timeout);
6620
6621 while ((tmp & mask) == val && time_before(jiffies, deadline)) {
6622 ata_msleep(ap, interval);
6623 tmp = ioread32(reg);
6624 }
6625
6626 return tmp;
6627}
6628
6629/*
6630 * Dummy port_ops
6631 */
6632static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
6633{
6634 return AC_ERR_SYSTEM;
6635}
6636
6637static void ata_dummy_error_handler(struct ata_port *ap)
6638{
6639 /* truly dummy */
6640}
6641
6642struct ata_port_operations ata_dummy_port_ops = {
6643 .qc_prep = ata_noop_qc_prep,
6644 .qc_issue = ata_dummy_qc_issue,
6645 .error_handler = ata_dummy_error_handler,
6646};
6647
6648const struct ata_port_info ata_dummy_port_info = {
6649 .port_ops = &ata_dummy_port_ops,
6650};
6651
6652/*
6653 * Utility print functions
6654 */
6655int ata_port_printk(const struct ata_port *ap, const char *level,
6656 const char *fmt, ...)
6657{
6658 struct va_format vaf;
6659 va_list args;
6660 int r;
6661
6662 va_start(args, fmt);
6663
6664 vaf.fmt = fmt;
6665 vaf.va = &args;
6666
6667 r = printk("%sata%u: %pV", level, ap->print_id, &vaf);
6668
6669 va_end(args);
6670
6671 return r;
6672}
6673EXPORT_SYMBOL(ata_port_printk);
6674
6675int ata_link_printk(const struct ata_link *link, const char *level,
6676 const char *fmt, ...)
6677{
6678 struct va_format vaf;
6679 va_list args;
6680 int r;
6681
6682 va_start(args, fmt);
6683
6684 vaf.fmt = fmt;
6685 vaf.va = &args;
6686
6687 if (sata_pmp_attached(link->ap) || link->ap->slave_link)
6688 r = printk("%sata%u.%02u: %pV",
6689 level, link->ap->print_id, link->pmp, &vaf);
6690 else
6691 r = printk("%sata%u: %pV",
6692 level, link->ap->print_id, &vaf);
6693
6694 va_end(args);
6695
6696 return r;
6697}
6698EXPORT_SYMBOL(ata_link_printk);
6699
6700int ata_dev_printk(const struct ata_device *dev, const char *level,
6701 const char *fmt, ...)
6702{
6703 struct va_format vaf;
6704 va_list args;
6705 int r;
6706
6707 va_start(args, fmt);
6708
6709 vaf.fmt = fmt;
6710 vaf.va = &args;
6711
6712 r = printk("%sata%u.%02u: %pV",
6713 level, dev->link->ap->print_id, dev->link->pmp + dev->devno,
6714 &vaf);
6715
6716 va_end(args);
6717
6718 return r;
6719}
6720EXPORT_SYMBOL(ata_dev_printk);
6721
6722void ata_print_version(const struct device *dev, const char *version)
6723{
6724 dev_printk(KERN_DEBUG, dev, "version %s\n", version);
6725}
6726EXPORT_SYMBOL(ata_print_version);
6727
6728/*
6729 * libata is essentially a library of internal helper functions for
6730 * low-level ATA host controller drivers. As such, the API/ABI is
6731 * likely to change as new drivers are added and updated.
6732 * Do not depend on ABI/API stability.
6733 */
6734EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
6735EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
6736EXPORT_SYMBOL_GPL(sata_deb_timing_long);
6737EXPORT_SYMBOL_GPL(ata_base_port_ops);
6738EXPORT_SYMBOL_GPL(sata_port_ops);
6739EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
6740EXPORT_SYMBOL_GPL(ata_dummy_port_info);
6741EXPORT_SYMBOL_GPL(ata_link_next);
6742EXPORT_SYMBOL_GPL(ata_dev_next);
6743EXPORT_SYMBOL_GPL(ata_std_bios_param);
6744EXPORT_SYMBOL_GPL(ata_scsi_unlock_native_capacity);
6745EXPORT_SYMBOL_GPL(ata_host_init);
6746EXPORT_SYMBOL_GPL(ata_host_alloc);
6747EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
6748EXPORT_SYMBOL_GPL(ata_slave_link_init);
6749EXPORT_SYMBOL_GPL(ata_host_start);
6750EXPORT_SYMBOL_GPL(ata_host_register);
6751EXPORT_SYMBOL_GPL(ata_host_activate);
6752EXPORT_SYMBOL_GPL(ata_host_detach);
6753EXPORT_SYMBOL_GPL(ata_sg_init);
6754EXPORT_SYMBOL_GPL(ata_qc_complete);
6755EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
6756EXPORT_SYMBOL_GPL(atapi_cmd_type);
6757EXPORT_SYMBOL_GPL(ata_tf_to_fis);
6758EXPORT_SYMBOL_GPL(ata_tf_from_fis);
6759EXPORT_SYMBOL_GPL(ata_pack_xfermask);
6760EXPORT_SYMBOL_GPL(ata_unpack_xfermask);
6761EXPORT_SYMBOL_GPL(ata_xfer_mask2mode);
6762EXPORT_SYMBOL_GPL(ata_xfer_mode2mask);
6763EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
6764EXPORT_SYMBOL_GPL(ata_mode_string);
6765EXPORT_SYMBOL_GPL(ata_id_xfermask);
6766EXPORT_SYMBOL_GPL(ata_do_set_mode);
6767EXPORT_SYMBOL_GPL(ata_std_qc_defer);
6768EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
6769EXPORT_SYMBOL_GPL(ata_dev_disable);
6770EXPORT_SYMBOL_GPL(sata_set_spd);
6771EXPORT_SYMBOL_GPL(ata_wait_after_reset);
6772EXPORT_SYMBOL_GPL(sata_link_debounce);
6773EXPORT_SYMBOL_GPL(sata_link_resume);
6774EXPORT_SYMBOL_GPL(sata_link_scr_lpm);
6775EXPORT_SYMBOL_GPL(ata_std_prereset);
6776EXPORT_SYMBOL_GPL(sata_link_hardreset);
6777EXPORT_SYMBOL_GPL(sata_std_hardreset);
6778EXPORT_SYMBOL_GPL(ata_std_postreset);
6779EXPORT_SYMBOL_GPL(ata_dev_classify);
6780EXPORT_SYMBOL_GPL(ata_dev_pair);
6781EXPORT_SYMBOL_GPL(ata_ratelimit);
6782EXPORT_SYMBOL_GPL(ata_msleep);
6783EXPORT_SYMBOL_GPL(ata_wait_register);
6784EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
6785EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
6786EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
6787EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
6788EXPORT_SYMBOL_GPL(__ata_change_queue_depth);
6789EXPORT_SYMBOL_GPL(sata_scr_valid);
6790EXPORT_SYMBOL_GPL(sata_scr_read);
6791EXPORT_SYMBOL_GPL(sata_scr_write);
6792EXPORT_SYMBOL_GPL(sata_scr_write_flush);
6793EXPORT_SYMBOL_GPL(ata_link_online);
6794EXPORT_SYMBOL_GPL(ata_link_offline);
6795#ifdef CONFIG_PM
6796EXPORT_SYMBOL_GPL(ata_host_suspend);
6797EXPORT_SYMBOL_GPL(ata_host_resume);
6798#endif /* CONFIG_PM */
6799EXPORT_SYMBOL_GPL(ata_id_string);
6800EXPORT_SYMBOL_GPL(ata_id_c_string);
6801EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
6802EXPORT_SYMBOL_GPL(ata_scsi_simulate);
6803
6804EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
6805EXPORT_SYMBOL_GPL(ata_timing_find_mode);
6806EXPORT_SYMBOL_GPL(ata_timing_compute);
6807EXPORT_SYMBOL_GPL(ata_timing_merge);
6808EXPORT_SYMBOL_GPL(ata_timing_cycle2mode);
6809
6810#ifdef CONFIG_PCI
6811EXPORT_SYMBOL_GPL(pci_test_config_bits);
6812EXPORT_SYMBOL_GPL(ata_pci_remove_one);
6813#ifdef CONFIG_PM
6814EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
6815EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
6816EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
6817EXPORT_SYMBOL_GPL(ata_pci_device_resume);
6818#endif /* CONFIG_PM */
6819#endif /* CONFIG_PCI */
6820
6821EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
6822EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
6823EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
6824EXPORT_SYMBOL_GPL(ata_port_desc);
6825#ifdef CONFIG_PCI
6826EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
6827#endif /* CONFIG_PCI */
6828EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
6829EXPORT_SYMBOL_GPL(ata_link_abort);
6830EXPORT_SYMBOL_GPL(ata_port_abort);
6831EXPORT_SYMBOL_GPL(ata_port_freeze);
6832EXPORT_SYMBOL_GPL(sata_async_notification);
6833EXPORT_SYMBOL_GPL(ata_eh_freeze_port);
6834EXPORT_SYMBOL_GPL(ata_eh_thaw_port);
6835EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
6836EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
6837EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
6838EXPORT_SYMBOL_GPL(ata_do_eh);
6839EXPORT_SYMBOL_GPL(ata_std_error_handler);
6840
6841EXPORT_SYMBOL_GPL(ata_cable_40wire);
6842EXPORT_SYMBOL_GPL(ata_cable_80wire);
6843EXPORT_SYMBOL_GPL(ata_cable_unknown);
6844EXPORT_SYMBOL_GPL(ata_cable_ignore);
6845EXPORT_SYMBOL_GPL(ata_cable_sata);
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * libata-core.c - helper library for ATA
4 *
5 * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
6 * Copyright 2003-2004 Jeff Garzik
7 *
8 * libata documentation is available via 'make {ps|pdf}docs',
9 * as Documentation/driver-api/libata.rst
10 *
11 * Hardware documentation available from http://www.t13.org/ and
12 * http://www.sata-io.org/
13 *
14 * Standards documents from:
15 * http://www.t13.org (ATA standards, PCI DMA IDE spec)
16 * http://www.t10.org (SCSI MMC - for ATAPI MMC)
17 * http://www.sata-io.org (SATA)
18 * http://www.compactflash.org (CF)
19 * http://www.qic.org (QIC157 - Tape and DSC)
20 * http://www.ce-ata.org (CE-ATA: not supported)
21 *
22 * libata is essentially a library of internal helper functions for
23 * low-level ATA host controller drivers. As such, the API/ABI is
24 * likely to change as new drivers are added and updated.
25 * Do not depend on ABI/API stability.
26 */
27
28#include <linux/kernel.h>
29#include <linux/module.h>
30#include <linux/pci.h>
31#include <linux/init.h>
32#include <linux/list.h>
33#include <linux/mm.h>
34#include <linux/spinlock.h>
35#include <linux/blkdev.h>
36#include <linux/delay.h>
37#include <linux/timer.h>
38#include <linux/time.h>
39#include <linux/interrupt.h>
40#include <linux/completion.h>
41#include <linux/suspend.h>
42#include <linux/workqueue.h>
43#include <linux/scatterlist.h>
44#include <linux/io.h>
45#include <linux/log2.h>
46#include <linux/slab.h>
47#include <linux/glob.h>
48#include <scsi/scsi.h>
49#include <scsi/scsi_cmnd.h>
50#include <scsi/scsi_host.h>
51#include <linux/libata.h>
52#include <asm/byteorder.h>
53#include <asm/unaligned.h>
54#include <linux/cdrom.h>
55#include <linux/ratelimit.h>
56#include <linux/leds.h>
57#include <linux/pm_runtime.h>
58#include <linux/platform_device.h>
59#include <asm/setup.h>
60
61#define CREATE_TRACE_POINTS
62#include <trace/events/libata.h>
63
64#include "libata.h"
65#include "libata-transport.h"
66
67const struct ata_port_operations ata_base_port_ops = {
68 .prereset = ata_std_prereset,
69 .postreset = ata_std_postreset,
70 .error_handler = ata_std_error_handler,
71 .sched_eh = ata_std_sched_eh,
72 .end_eh = ata_std_end_eh,
73};
74
75const struct ata_port_operations sata_port_ops = {
76 .inherits = &ata_base_port_ops,
77
78 .qc_defer = ata_std_qc_defer,
79 .hardreset = sata_std_hardreset,
80};
81EXPORT_SYMBOL_GPL(sata_port_ops);
82
83static unsigned int ata_dev_init_params(struct ata_device *dev,
84 u16 heads, u16 sectors);
85static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
86static void ata_dev_xfermask(struct ata_device *dev);
87static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
88
89atomic_t ata_print_id = ATOMIC_INIT(0);
90
91#ifdef CONFIG_ATA_FORCE
92struct ata_force_param {
93 const char *name;
94 u8 cbl;
95 u8 spd_limit;
96 unsigned int xfer_mask;
97 unsigned int horkage_on;
98 unsigned int horkage_off;
99 u16 lflags_on;
100 u16 lflags_off;
101};
102
103struct ata_force_ent {
104 int port;
105 int device;
106 struct ata_force_param param;
107};
108
109static struct ata_force_ent *ata_force_tbl;
110static int ata_force_tbl_size;
111
112static char ata_force_param_buf[COMMAND_LINE_SIZE] __initdata;
113/* param_buf is thrown away after initialization, disallow read */
114module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
115MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/admin-guide/kernel-parameters.rst for details)");
116#endif
117
118static int atapi_enabled = 1;
119module_param(atapi_enabled, int, 0444);
120MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])");
121
122static int atapi_dmadir = 0;
123module_param(atapi_dmadir, int, 0444);
124MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)");
125
126int atapi_passthru16 = 1;
127module_param(atapi_passthru16, int, 0444);
128MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])");
129
130int libata_fua = 0;
131module_param_named(fua, libata_fua, int, 0444);
132MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)");
133
134static int ata_ignore_hpa;
135module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
136MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)");
137
138static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CFA;
139module_param_named(dma, libata_dma_mask, int, 0444);
140MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)");
141
142static int ata_probe_timeout;
143module_param(ata_probe_timeout, int, 0444);
144MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
145
146int libata_noacpi = 0;
147module_param_named(noacpi, libata_noacpi, int, 0444);
148MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)");
149
150int libata_allow_tpm = 0;
151module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
152MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
153
154static int atapi_an;
155module_param(atapi_an, int, 0444);
156MODULE_PARM_DESC(atapi_an, "Enable ATAPI AN media presence notification (0=0ff [default], 1=on)");
157
158MODULE_AUTHOR("Jeff Garzik");
159MODULE_DESCRIPTION("Library module for ATA devices");
160MODULE_LICENSE("GPL");
161MODULE_VERSION(DRV_VERSION);
162
163static inline bool ata_dev_print_info(struct ata_device *dev)
164{
165 struct ata_eh_context *ehc = &dev->link->eh_context;
166
167 return ehc->i.flags & ATA_EHI_PRINTINFO;
168}
169
170static bool ata_sstatus_online(u32 sstatus)
171{
172 return (sstatus & 0xf) == 0x3;
173}
174
175/**
176 * ata_link_next - link iteration helper
177 * @link: the previous link, NULL to start
178 * @ap: ATA port containing links to iterate
179 * @mode: iteration mode, one of ATA_LITER_*
180 *
181 * LOCKING:
182 * Host lock or EH context.
183 *
184 * RETURNS:
185 * Pointer to the next link.
186 */
187struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap,
188 enum ata_link_iter_mode mode)
189{
190 BUG_ON(mode != ATA_LITER_EDGE &&
191 mode != ATA_LITER_PMP_FIRST && mode != ATA_LITER_HOST_FIRST);
192
193 /* NULL link indicates start of iteration */
194 if (!link)
195 switch (mode) {
196 case ATA_LITER_EDGE:
197 case ATA_LITER_PMP_FIRST:
198 if (sata_pmp_attached(ap))
199 return ap->pmp_link;
200 fallthrough;
201 case ATA_LITER_HOST_FIRST:
202 return &ap->link;
203 }
204
205 /* we just iterated over the host link, what's next? */
206 if (link == &ap->link)
207 switch (mode) {
208 case ATA_LITER_HOST_FIRST:
209 if (sata_pmp_attached(ap))
210 return ap->pmp_link;
211 fallthrough;
212 case ATA_LITER_PMP_FIRST:
213 if (unlikely(ap->slave_link))
214 return ap->slave_link;
215 fallthrough;
216 case ATA_LITER_EDGE:
217 return NULL;
218 }
219
220 /* slave_link excludes PMP */
221 if (unlikely(link == ap->slave_link))
222 return NULL;
223
224 /* we were over a PMP link */
225 if (++link < ap->pmp_link + ap->nr_pmp_links)
226 return link;
227
228 if (mode == ATA_LITER_PMP_FIRST)
229 return &ap->link;
230
231 return NULL;
232}
233EXPORT_SYMBOL_GPL(ata_link_next);
234
235/**
236 * ata_dev_next - device iteration helper
237 * @dev: the previous device, NULL to start
238 * @link: ATA link containing devices to iterate
239 * @mode: iteration mode, one of ATA_DITER_*
240 *
241 * LOCKING:
242 * Host lock or EH context.
243 *
244 * RETURNS:
245 * Pointer to the next device.
246 */
247struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link,
248 enum ata_dev_iter_mode mode)
249{
250 BUG_ON(mode != ATA_DITER_ENABLED && mode != ATA_DITER_ENABLED_REVERSE &&
251 mode != ATA_DITER_ALL && mode != ATA_DITER_ALL_REVERSE);
252
253 /* NULL dev indicates start of iteration */
254 if (!dev)
255 switch (mode) {
256 case ATA_DITER_ENABLED:
257 case ATA_DITER_ALL:
258 dev = link->device;
259 goto check;
260 case ATA_DITER_ENABLED_REVERSE:
261 case ATA_DITER_ALL_REVERSE:
262 dev = link->device + ata_link_max_devices(link) - 1;
263 goto check;
264 }
265
266 next:
267 /* move to the next one */
268 switch (mode) {
269 case ATA_DITER_ENABLED:
270 case ATA_DITER_ALL:
271 if (++dev < link->device + ata_link_max_devices(link))
272 goto check;
273 return NULL;
274 case ATA_DITER_ENABLED_REVERSE:
275 case ATA_DITER_ALL_REVERSE:
276 if (--dev >= link->device)
277 goto check;
278 return NULL;
279 }
280
281 check:
282 if ((mode == ATA_DITER_ENABLED || mode == ATA_DITER_ENABLED_REVERSE) &&
283 !ata_dev_enabled(dev))
284 goto next;
285 return dev;
286}
287EXPORT_SYMBOL_GPL(ata_dev_next);
288
289/**
290 * ata_dev_phys_link - find physical link for a device
291 * @dev: ATA device to look up physical link for
292 *
293 * Look up physical link which @dev is attached to. Note that
294 * this is different from @dev->link only when @dev is on slave
295 * link. For all other cases, it's the same as @dev->link.
296 *
297 * LOCKING:
298 * Don't care.
299 *
300 * RETURNS:
301 * Pointer to the found physical link.
302 */
303struct ata_link *ata_dev_phys_link(struct ata_device *dev)
304{
305 struct ata_port *ap = dev->link->ap;
306
307 if (!ap->slave_link)
308 return dev->link;
309 if (!dev->devno)
310 return &ap->link;
311 return ap->slave_link;
312}
313
314#ifdef CONFIG_ATA_FORCE
315/**
316 * ata_force_cbl - force cable type according to libata.force
317 * @ap: ATA port of interest
318 *
319 * Force cable type according to libata.force and whine about it.
320 * The last entry which has matching port number is used, so it
321 * can be specified as part of device force parameters. For
322 * example, both "a:40c,1.00:udma4" and "1.00:40c,udma4" have the
323 * same effect.
324 *
325 * LOCKING:
326 * EH context.
327 */
328void ata_force_cbl(struct ata_port *ap)
329{
330 int i;
331
332 for (i = ata_force_tbl_size - 1; i >= 0; i--) {
333 const struct ata_force_ent *fe = &ata_force_tbl[i];
334
335 if (fe->port != -1 && fe->port != ap->print_id)
336 continue;
337
338 if (fe->param.cbl == ATA_CBL_NONE)
339 continue;
340
341 ap->cbl = fe->param.cbl;
342 ata_port_notice(ap, "FORCE: cable set to %s\n", fe->param.name);
343 return;
344 }
345}
346
347/**
348 * ata_force_link_limits - force link limits according to libata.force
349 * @link: ATA link of interest
350 *
351 * Force link flags and SATA spd limit according to libata.force
352 * and whine about it. When only the port part is specified
353 * (e.g. 1:), the limit applies to all links connected to both
354 * the host link and all fan-out ports connected via PMP. If the
355 * device part is specified as 0 (e.g. 1.00:), it specifies the
356 * first fan-out link not the host link. Device number 15 always
357 * points to the host link whether PMP is attached or not. If the
358 * controller has slave link, device number 16 points to it.
359 *
360 * LOCKING:
361 * EH context.
362 */
363static void ata_force_link_limits(struct ata_link *link)
364{
365 bool did_spd = false;
366 int linkno = link->pmp;
367 int i;
368
369 if (ata_is_host_link(link))
370 linkno += 15;
371
372 for (i = ata_force_tbl_size - 1; i >= 0; i--) {
373 const struct ata_force_ent *fe = &ata_force_tbl[i];
374
375 if (fe->port != -1 && fe->port != link->ap->print_id)
376 continue;
377
378 if (fe->device != -1 && fe->device != linkno)
379 continue;
380
381 /* only honor the first spd limit */
382 if (!did_spd && fe->param.spd_limit) {
383 link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
384 ata_link_notice(link, "FORCE: PHY spd limit set to %s\n",
385 fe->param.name);
386 did_spd = true;
387 }
388
389 /* let lflags stack */
390 if (fe->param.lflags_on) {
391 link->flags |= fe->param.lflags_on;
392 ata_link_notice(link,
393 "FORCE: link flag 0x%x forced -> 0x%x\n",
394 fe->param.lflags_on, link->flags);
395 }
396 if (fe->param.lflags_off) {
397 link->flags &= ~fe->param.lflags_off;
398 ata_link_notice(link,
399 "FORCE: link flag 0x%x cleared -> 0x%x\n",
400 fe->param.lflags_off, link->flags);
401 }
402 }
403}
404
405/**
406 * ata_force_xfermask - force xfermask according to libata.force
407 * @dev: ATA device of interest
408 *
409 * Force xfer_mask according to libata.force and whine about it.
410 * For consistency with link selection, device number 15 selects
411 * the first device connected to the host link.
412 *
413 * LOCKING:
414 * EH context.
415 */
416static void ata_force_xfermask(struct ata_device *dev)
417{
418 int devno = dev->link->pmp + dev->devno;
419 int alt_devno = devno;
420 int i;
421
422 /* allow n.15/16 for devices attached to host port */
423 if (ata_is_host_link(dev->link))
424 alt_devno += 15;
425
426 for (i = ata_force_tbl_size - 1; i >= 0; i--) {
427 const struct ata_force_ent *fe = &ata_force_tbl[i];
428 unsigned int pio_mask, mwdma_mask, udma_mask;
429
430 if (fe->port != -1 && fe->port != dev->link->ap->print_id)
431 continue;
432
433 if (fe->device != -1 && fe->device != devno &&
434 fe->device != alt_devno)
435 continue;
436
437 if (!fe->param.xfer_mask)
438 continue;
439
440 ata_unpack_xfermask(fe->param.xfer_mask,
441 &pio_mask, &mwdma_mask, &udma_mask);
442 if (udma_mask)
443 dev->udma_mask = udma_mask;
444 else if (mwdma_mask) {
445 dev->udma_mask = 0;
446 dev->mwdma_mask = mwdma_mask;
447 } else {
448 dev->udma_mask = 0;
449 dev->mwdma_mask = 0;
450 dev->pio_mask = pio_mask;
451 }
452
453 ata_dev_notice(dev, "FORCE: xfer_mask set to %s\n",
454 fe->param.name);
455 return;
456 }
457}
458
459/**
460 * ata_force_horkage - force horkage according to libata.force
461 * @dev: ATA device of interest
462 *
463 * Force horkage according to libata.force and whine about it.
464 * For consistency with link selection, device number 15 selects
465 * the first device connected to the host link.
466 *
467 * LOCKING:
468 * EH context.
469 */
470static void ata_force_horkage(struct ata_device *dev)
471{
472 int devno = dev->link->pmp + dev->devno;
473 int alt_devno = devno;
474 int i;
475
476 /* allow n.15/16 for devices attached to host port */
477 if (ata_is_host_link(dev->link))
478 alt_devno += 15;
479
480 for (i = 0; i < ata_force_tbl_size; i++) {
481 const struct ata_force_ent *fe = &ata_force_tbl[i];
482
483 if (fe->port != -1 && fe->port != dev->link->ap->print_id)
484 continue;
485
486 if (fe->device != -1 && fe->device != devno &&
487 fe->device != alt_devno)
488 continue;
489
490 if (!(~dev->horkage & fe->param.horkage_on) &&
491 !(dev->horkage & fe->param.horkage_off))
492 continue;
493
494 dev->horkage |= fe->param.horkage_on;
495 dev->horkage &= ~fe->param.horkage_off;
496
497 ata_dev_notice(dev, "FORCE: horkage modified (%s)\n",
498 fe->param.name);
499 }
500}
501#else
502static inline void ata_force_link_limits(struct ata_link *link) { }
503static inline void ata_force_xfermask(struct ata_device *dev) { }
504static inline void ata_force_horkage(struct ata_device *dev) { }
505#endif
506
507/**
508 * atapi_cmd_type - Determine ATAPI command type from SCSI opcode
509 * @opcode: SCSI opcode
510 *
511 * Determine ATAPI command type from @opcode.
512 *
513 * LOCKING:
514 * None.
515 *
516 * RETURNS:
517 * ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC}
518 */
519int atapi_cmd_type(u8 opcode)
520{
521 switch (opcode) {
522 case GPCMD_READ_10:
523 case GPCMD_READ_12:
524 return ATAPI_READ;
525
526 case GPCMD_WRITE_10:
527 case GPCMD_WRITE_12:
528 case GPCMD_WRITE_AND_VERIFY_10:
529 return ATAPI_WRITE;
530
531 case GPCMD_READ_CD:
532 case GPCMD_READ_CD_MSF:
533 return ATAPI_READ_CD;
534
535 case ATA_16:
536 case ATA_12:
537 if (atapi_passthru16)
538 return ATAPI_PASS_THRU;
539 fallthrough;
540 default:
541 return ATAPI_MISC;
542 }
543}
544EXPORT_SYMBOL_GPL(atapi_cmd_type);
545
546static const u8 ata_rw_cmds[] = {
547 /* pio multi */
548 ATA_CMD_READ_MULTI,
549 ATA_CMD_WRITE_MULTI,
550 ATA_CMD_READ_MULTI_EXT,
551 ATA_CMD_WRITE_MULTI_EXT,
552 0,
553 0,
554 0,
555 0,
556 /* pio */
557 ATA_CMD_PIO_READ,
558 ATA_CMD_PIO_WRITE,
559 ATA_CMD_PIO_READ_EXT,
560 ATA_CMD_PIO_WRITE_EXT,
561 0,
562 0,
563 0,
564 0,
565 /* dma */
566 ATA_CMD_READ,
567 ATA_CMD_WRITE,
568 ATA_CMD_READ_EXT,
569 ATA_CMD_WRITE_EXT,
570 0,
571 0,
572 0,
573 ATA_CMD_WRITE_FUA_EXT
574};
575
576/**
577 * ata_set_rwcmd_protocol - set taskfile r/w command and protocol
578 * @dev: target device for the taskfile
579 * @tf: taskfile to examine and configure
580 *
581 * Examine the device configuration and tf->flags to determine
582 * the proper read/write command and protocol to use for @tf.
583 *
584 * LOCKING:
585 * caller.
586 */
587static bool ata_set_rwcmd_protocol(struct ata_device *dev,
588 struct ata_taskfile *tf)
589{
590 u8 cmd;
591
592 int index, fua, lba48, write;
593
594 fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0;
595 lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
596 write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
597
598 if (dev->flags & ATA_DFLAG_PIO) {
599 tf->protocol = ATA_PROT_PIO;
600 index = dev->multi_count ? 0 : 8;
601 } else if (lba48 && (dev->link->ap->flags & ATA_FLAG_PIO_LBA48)) {
602 /* Unable to use DMA due to host limitation */
603 tf->protocol = ATA_PROT_PIO;
604 index = dev->multi_count ? 0 : 8;
605 } else {
606 tf->protocol = ATA_PROT_DMA;
607 index = 16;
608 }
609
610 cmd = ata_rw_cmds[index + fua + lba48 + write];
611 if (!cmd)
612 return false;
613
614 tf->command = cmd;
615
616 return true;
617}
618
619/**
620 * ata_tf_read_block - Read block address from ATA taskfile
621 * @tf: ATA taskfile of interest
622 * @dev: ATA device @tf belongs to
623 *
624 * LOCKING:
625 * None.
626 *
627 * Read block address from @tf. This function can handle all
628 * three address formats - LBA, LBA48 and CHS. tf->protocol and
629 * flags select the address format to use.
630 *
631 * RETURNS:
632 * Block address read from @tf.
633 */
634u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev)
635{
636 u64 block = 0;
637
638 if (tf->flags & ATA_TFLAG_LBA) {
639 if (tf->flags & ATA_TFLAG_LBA48) {
640 block |= (u64)tf->hob_lbah << 40;
641 block |= (u64)tf->hob_lbam << 32;
642 block |= (u64)tf->hob_lbal << 24;
643 } else
644 block |= (tf->device & 0xf) << 24;
645
646 block |= tf->lbah << 16;
647 block |= tf->lbam << 8;
648 block |= tf->lbal;
649 } else {
650 u32 cyl, head, sect;
651
652 cyl = tf->lbam | (tf->lbah << 8);
653 head = tf->device & 0xf;
654 sect = tf->lbal;
655
656 if (!sect) {
657 ata_dev_warn(dev,
658 "device reported invalid CHS sector 0\n");
659 return U64_MAX;
660 }
661
662 block = (cyl * dev->heads + head) * dev->sectors + sect - 1;
663 }
664
665 return block;
666}
667
668/*
669 * Set a taskfile command duration limit index.
670 */
671static inline void ata_set_tf_cdl(struct ata_queued_cmd *qc, int cdl)
672{
673 struct ata_taskfile *tf = &qc->tf;
674
675 if (tf->protocol == ATA_PROT_NCQ)
676 tf->auxiliary |= cdl;
677 else
678 tf->feature |= cdl;
679
680 /*
681 * Mark this command as having a CDL and request the result
682 * task file so that we can inspect the sense data available
683 * bit on completion.
684 */
685 qc->flags |= ATA_QCFLAG_HAS_CDL | ATA_QCFLAG_RESULT_TF;
686}
687
688/**
689 * ata_build_rw_tf - Build ATA taskfile for given read/write request
690 * @qc: Metadata associated with the taskfile to build
691 * @block: Block address
692 * @n_block: Number of blocks
693 * @tf_flags: RW/FUA etc...
694 * @cdl: Command duration limit index
695 * @class: IO priority class
696 *
697 * LOCKING:
698 * None.
699 *
700 * Build ATA taskfile for the command @qc for read/write request described
701 * by @block, @n_block, @tf_flags and @class.
702 *
703 * RETURNS:
704 *
705 * 0 on success, -ERANGE if the request is too large for @dev,
706 * -EINVAL if the request is invalid.
707 */
708int ata_build_rw_tf(struct ata_queued_cmd *qc, u64 block, u32 n_block,
709 unsigned int tf_flags, int cdl, int class)
710{
711 struct ata_taskfile *tf = &qc->tf;
712 struct ata_device *dev = qc->dev;
713
714 tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
715 tf->flags |= tf_flags;
716
717 if (ata_ncq_enabled(dev)) {
718 /* yay, NCQ */
719 if (!lba_48_ok(block, n_block))
720 return -ERANGE;
721
722 tf->protocol = ATA_PROT_NCQ;
723 tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
724
725 if (tf->flags & ATA_TFLAG_WRITE)
726 tf->command = ATA_CMD_FPDMA_WRITE;
727 else
728 tf->command = ATA_CMD_FPDMA_READ;
729
730 tf->nsect = qc->hw_tag << 3;
731 tf->hob_feature = (n_block >> 8) & 0xff;
732 tf->feature = n_block & 0xff;
733
734 tf->hob_lbah = (block >> 40) & 0xff;
735 tf->hob_lbam = (block >> 32) & 0xff;
736 tf->hob_lbal = (block >> 24) & 0xff;
737 tf->lbah = (block >> 16) & 0xff;
738 tf->lbam = (block >> 8) & 0xff;
739 tf->lbal = block & 0xff;
740
741 tf->device = ATA_LBA;
742 if (tf->flags & ATA_TFLAG_FUA)
743 tf->device |= 1 << 7;
744
745 if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED &&
746 class == IOPRIO_CLASS_RT)
747 tf->hob_nsect |= ATA_PRIO_HIGH << ATA_SHIFT_PRIO;
748
749 if ((dev->flags & ATA_DFLAG_CDL_ENABLED) && cdl)
750 ata_set_tf_cdl(qc, cdl);
751
752 } else if (dev->flags & ATA_DFLAG_LBA) {
753 tf->flags |= ATA_TFLAG_LBA;
754
755 if ((dev->flags & ATA_DFLAG_CDL_ENABLED) && cdl)
756 ata_set_tf_cdl(qc, cdl);
757
758 /* Both FUA writes and a CDL index require 48-bit commands */
759 if (!(tf->flags & ATA_TFLAG_FUA) &&
760 !(qc->flags & ATA_QCFLAG_HAS_CDL) &&
761 lba_28_ok(block, n_block)) {
762 /* use LBA28 */
763 tf->device |= (block >> 24) & 0xf;
764 } else if (lba_48_ok(block, n_block)) {
765 if (!(dev->flags & ATA_DFLAG_LBA48))
766 return -ERANGE;
767
768 /* use LBA48 */
769 tf->flags |= ATA_TFLAG_LBA48;
770
771 tf->hob_nsect = (n_block >> 8) & 0xff;
772
773 tf->hob_lbah = (block >> 40) & 0xff;
774 tf->hob_lbam = (block >> 32) & 0xff;
775 tf->hob_lbal = (block >> 24) & 0xff;
776 } else {
777 /* request too large even for LBA48 */
778 return -ERANGE;
779 }
780
781 if (unlikely(!ata_set_rwcmd_protocol(dev, tf)))
782 return -EINVAL;
783
784 tf->nsect = n_block & 0xff;
785
786 tf->lbah = (block >> 16) & 0xff;
787 tf->lbam = (block >> 8) & 0xff;
788 tf->lbal = block & 0xff;
789
790 tf->device |= ATA_LBA;
791 } else {
792 /* CHS */
793 u32 sect, head, cyl, track;
794
795 /* The request -may- be too large for CHS addressing. */
796 if (!lba_28_ok(block, n_block))
797 return -ERANGE;
798
799 if (unlikely(!ata_set_rwcmd_protocol(dev, tf)))
800 return -EINVAL;
801
802 /* Convert LBA to CHS */
803 track = (u32)block / dev->sectors;
804 cyl = track / dev->heads;
805 head = track % dev->heads;
806 sect = (u32)block % dev->sectors + 1;
807
808 /* Check whether the converted CHS can fit.
809 Cylinder: 0-65535
810 Head: 0-15
811 Sector: 1-255*/
812 if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
813 return -ERANGE;
814
815 tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
816 tf->lbal = sect;
817 tf->lbam = cyl;
818 tf->lbah = cyl >> 8;
819 tf->device |= head;
820 }
821
822 return 0;
823}
824
825/**
826 * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask
827 * @pio_mask: pio_mask
828 * @mwdma_mask: mwdma_mask
829 * @udma_mask: udma_mask
830 *
831 * Pack @pio_mask, @mwdma_mask and @udma_mask into a single
832 * unsigned int xfer_mask.
833 *
834 * LOCKING:
835 * None.
836 *
837 * RETURNS:
838 * Packed xfer_mask.
839 */
840unsigned int ata_pack_xfermask(unsigned int pio_mask,
841 unsigned int mwdma_mask,
842 unsigned int udma_mask)
843{
844 return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) |
845 ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) |
846 ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA);
847}
848EXPORT_SYMBOL_GPL(ata_pack_xfermask);
849
850/**
851 * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks
852 * @xfer_mask: xfer_mask to unpack
853 * @pio_mask: resulting pio_mask
854 * @mwdma_mask: resulting mwdma_mask
855 * @udma_mask: resulting udma_mask
856 *
857 * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask.
858 * Any NULL destination masks will be ignored.
859 */
860void ata_unpack_xfermask(unsigned int xfer_mask, unsigned int *pio_mask,
861 unsigned int *mwdma_mask, unsigned int *udma_mask)
862{
863 if (pio_mask)
864 *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO;
865 if (mwdma_mask)
866 *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA;
867 if (udma_mask)
868 *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA;
869}
870
871static const struct ata_xfer_ent {
872 int shift, bits;
873 u8 base;
874} ata_xfer_tbl[] = {
875 { ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 },
876 { ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 },
877 { ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 },
878 { -1, },
879};
880
881/**
882 * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask
883 * @xfer_mask: xfer_mask of interest
884 *
885 * Return matching XFER_* value for @xfer_mask. Only the highest
886 * bit of @xfer_mask is considered.
887 *
888 * LOCKING:
889 * None.
890 *
891 * RETURNS:
892 * Matching XFER_* value, 0xff if no match found.
893 */
894u8 ata_xfer_mask2mode(unsigned int xfer_mask)
895{
896 int highbit = fls(xfer_mask) - 1;
897 const struct ata_xfer_ent *ent;
898
899 for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
900 if (highbit >= ent->shift && highbit < ent->shift + ent->bits)
901 return ent->base + highbit - ent->shift;
902 return 0xff;
903}
904EXPORT_SYMBOL_GPL(ata_xfer_mask2mode);
905
906/**
907 * ata_xfer_mode2mask - Find matching xfer_mask for XFER_*
908 * @xfer_mode: XFER_* of interest
909 *
910 * Return matching xfer_mask for @xfer_mode.
911 *
912 * LOCKING:
913 * None.
914 *
915 * RETURNS:
916 * Matching xfer_mask, 0 if no match found.
917 */
918unsigned int ata_xfer_mode2mask(u8 xfer_mode)
919{
920 const struct ata_xfer_ent *ent;
921
922 for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
923 if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
924 return ((2 << (ent->shift + xfer_mode - ent->base)) - 1)
925 & ~((1 << ent->shift) - 1);
926 return 0;
927}
928EXPORT_SYMBOL_GPL(ata_xfer_mode2mask);
929
930/**
931 * ata_xfer_mode2shift - Find matching xfer_shift for XFER_*
932 * @xfer_mode: XFER_* of interest
933 *
934 * Return matching xfer_shift for @xfer_mode.
935 *
936 * LOCKING:
937 * None.
938 *
939 * RETURNS:
940 * Matching xfer_shift, -1 if no match found.
941 */
942int ata_xfer_mode2shift(u8 xfer_mode)
943{
944 const struct ata_xfer_ent *ent;
945
946 for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
947 if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
948 return ent->shift;
949 return -1;
950}
951EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
952
953/**
954 * ata_mode_string - convert xfer_mask to string
955 * @xfer_mask: mask of bits supported; only highest bit counts.
956 *
957 * Determine string which represents the highest speed
958 * (highest bit in @modemask).
959 *
960 * LOCKING:
961 * None.
962 *
963 * RETURNS:
964 * Constant C string representing highest speed listed in
965 * @mode_mask, or the constant C string "<n/a>".
966 */
967const char *ata_mode_string(unsigned int xfer_mask)
968{
969 static const char * const xfer_mode_str[] = {
970 "PIO0",
971 "PIO1",
972 "PIO2",
973 "PIO3",
974 "PIO4",
975 "PIO5",
976 "PIO6",
977 "MWDMA0",
978 "MWDMA1",
979 "MWDMA2",
980 "MWDMA3",
981 "MWDMA4",
982 "UDMA/16",
983 "UDMA/25",
984 "UDMA/33",
985 "UDMA/44",
986 "UDMA/66",
987 "UDMA/100",
988 "UDMA/133",
989 "UDMA7",
990 };
991 int highbit;
992
993 highbit = fls(xfer_mask) - 1;
994 if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str))
995 return xfer_mode_str[highbit];
996 return "<n/a>";
997}
998EXPORT_SYMBOL_GPL(ata_mode_string);
999
1000const char *sata_spd_string(unsigned int spd)
1001{
1002 static const char * const spd_str[] = {
1003 "1.5 Gbps",
1004 "3.0 Gbps",
1005 "6.0 Gbps",
1006 };
1007
1008 if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str))
1009 return "<unknown>";
1010 return spd_str[spd - 1];
1011}
1012
1013/**
1014 * ata_dev_classify - determine device type based on ATA-spec signature
1015 * @tf: ATA taskfile register set for device to be identified
1016 *
1017 * Determine from taskfile register contents whether a device is
1018 * ATA or ATAPI, as per "Signature and persistence" section
1019 * of ATA/PI spec (volume 1, sect 5.14).
1020 *
1021 * LOCKING:
1022 * None.
1023 *
1024 * RETURNS:
1025 * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, %ATA_DEV_PMP,
1026 * %ATA_DEV_ZAC, or %ATA_DEV_UNKNOWN the event of failure.
1027 */
1028unsigned int ata_dev_classify(const struct ata_taskfile *tf)
1029{
1030 /* Apple's open source Darwin code hints that some devices only
1031 * put a proper signature into the LBA mid/high registers,
1032 * So, we only check those. It's sufficient for uniqueness.
1033 *
1034 * ATA/ATAPI-7 (d1532v1r1: Feb. 19, 2003) specified separate
1035 * signatures for ATA and ATAPI devices attached on SerialATA,
1036 * 0x3c/0xc3 and 0x69/0x96 respectively. However, SerialATA
1037 * spec has never mentioned about using different signatures
1038 * for ATA/ATAPI devices. Then, Serial ATA II: Port
1039 * Multiplier specification began to use 0x69/0x96 to identify
1040 * port multpliers and 0x3c/0xc3 to identify SEMB device.
1041 * ATA/ATAPI-7 dropped descriptions about 0x3c/0xc3 and
1042 * 0x69/0x96 shortly and described them as reserved for
1043 * SerialATA.
1044 *
1045 * We follow the current spec and consider that 0x69/0x96
1046 * identifies a port multiplier and 0x3c/0xc3 a SEMB device.
1047 * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports
1048 * SEMB signature. This is worked around in
1049 * ata_dev_read_id().
1050 */
1051 if (tf->lbam == 0 && tf->lbah == 0)
1052 return ATA_DEV_ATA;
1053
1054 if (tf->lbam == 0x14 && tf->lbah == 0xeb)
1055 return ATA_DEV_ATAPI;
1056
1057 if (tf->lbam == 0x69 && tf->lbah == 0x96)
1058 return ATA_DEV_PMP;
1059
1060 if (tf->lbam == 0x3c && tf->lbah == 0xc3)
1061 return ATA_DEV_SEMB;
1062
1063 if (tf->lbam == 0xcd && tf->lbah == 0xab)
1064 return ATA_DEV_ZAC;
1065
1066 return ATA_DEV_UNKNOWN;
1067}
1068EXPORT_SYMBOL_GPL(ata_dev_classify);
1069
1070/**
1071 * ata_id_string - Convert IDENTIFY DEVICE page into string
1072 * @id: IDENTIFY DEVICE results we will examine
1073 * @s: string into which data is output
1074 * @ofs: offset into identify device page
1075 * @len: length of string to return. must be an even number.
1076 *
1077 * The strings in the IDENTIFY DEVICE page are broken up into
1078 * 16-bit chunks. Run through the string, and output each
1079 * 8-bit chunk linearly, regardless of platform.
1080 *
1081 * LOCKING:
1082 * caller.
1083 */
1084
1085void ata_id_string(const u16 *id, unsigned char *s,
1086 unsigned int ofs, unsigned int len)
1087{
1088 unsigned int c;
1089
1090 BUG_ON(len & 1);
1091
1092 while (len > 0) {
1093 c = id[ofs] >> 8;
1094 *s = c;
1095 s++;
1096
1097 c = id[ofs] & 0xff;
1098 *s = c;
1099 s++;
1100
1101 ofs++;
1102 len -= 2;
1103 }
1104}
1105EXPORT_SYMBOL_GPL(ata_id_string);
1106
1107/**
1108 * ata_id_c_string - Convert IDENTIFY DEVICE page into C string
1109 * @id: IDENTIFY DEVICE results we will examine
1110 * @s: string into which data is output
1111 * @ofs: offset into identify device page
1112 * @len: length of string to return. must be an odd number.
1113 *
1114 * This function is identical to ata_id_string except that it
1115 * trims trailing spaces and terminates the resulting string with
1116 * null. @len must be actual maximum length (even number) + 1.
1117 *
1118 * LOCKING:
1119 * caller.
1120 */
1121void ata_id_c_string(const u16 *id, unsigned char *s,
1122 unsigned int ofs, unsigned int len)
1123{
1124 unsigned char *p;
1125
1126 ata_id_string(id, s, ofs, len - 1);
1127
1128 p = s + strnlen(s, len - 1);
1129 while (p > s && p[-1] == ' ')
1130 p--;
1131 *p = '\0';
1132}
1133EXPORT_SYMBOL_GPL(ata_id_c_string);
1134
1135static u64 ata_id_n_sectors(const u16 *id)
1136{
1137 if (ata_id_has_lba(id)) {
1138 if (ata_id_has_lba48(id))
1139 return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
1140
1141 return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
1142 }
1143
1144 if (ata_id_current_chs_valid(id))
1145 return (u32)id[ATA_ID_CUR_CYLS] * (u32)id[ATA_ID_CUR_HEADS] *
1146 (u32)id[ATA_ID_CUR_SECTORS];
1147
1148 return (u32)id[ATA_ID_CYLS] * (u32)id[ATA_ID_HEADS] *
1149 (u32)id[ATA_ID_SECTORS];
1150}
1151
1152u64 ata_tf_to_lba48(const struct ata_taskfile *tf)
1153{
1154 u64 sectors = 0;
1155
1156 sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
1157 sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
1158 sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24;
1159 sectors |= (tf->lbah & 0xff) << 16;
1160 sectors |= (tf->lbam & 0xff) << 8;
1161 sectors |= (tf->lbal & 0xff);
1162
1163 return sectors;
1164}
1165
1166u64 ata_tf_to_lba(const struct ata_taskfile *tf)
1167{
1168 u64 sectors = 0;
1169
1170 sectors |= (tf->device & 0x0f) << 24;
1171 sectors |= (tf->lbah & 0xff) << 16;
1172 sectors |= (tf->lbam & 0xff) << 8;
1173 sectors |= (tf->lbal & 0xff);
1174
1175 return sectors;
1176}
1177
1178/**
1179 * ata_read_native_max_address - Read native max address
1180 * @dev: target device
1181 * @max_sectors: out parameter for the result native max address
1182 *
1183 * Perform an LBA48 or LBA28 native size query upon the device in
1184 * question.
1185 *
1186 * RETURNS:
1187 * 0 on success, -EACCES if command is aborted by the drive.
1188 * -EIO on other errors.
1189 */
1190static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors)
1191{
1192 unsigned int err_mask;
1193 struct ata_taskfile tf;
1194 int lba48 = ata_id_has_lba48(dev->id);
1195
1196 ata_tf_init(dev, &tf);
1197
1198 /* always clear all address registers */
1199 tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
1200
1201 if (lba48) {
1202 tf.command = ATA_CMD_READ_NATIVE_MAX_EXT;
1203 tf.flags |= ATA_TFLAG_LBA48;
1204 } else
1205 tf.command = ATA_CMD_READ_NATIVE_MAX;
1206
1207 tf.protocol = ATA_PROT_NODATA;
1208 tf.device |= ATA_LBA;
1209
1210 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
1211 if (err_mask) {
1212 ata_dev_warn(dev,
1213 "failed to read native max address (err_mask=0x%x)\n",
1214 err_mask);
1215 if (err_mask == AC_ERR_DEV && (tf.error & ATA_ABORTED))
1216 return -EACCES;
1217 return -EIO;
1218 }
1219
1220 if (lba48)
1221 *max_sectors = ata_tf_to_lba48(&tf) + 1;
1222 else
1223 *max_sectors = ata_tf_to_lba(&tf) + 1;
1224 if (dev->horkage & ATA_HORKAGE_HPA_SIZE)
1225 (*max_sectors)--;
1226 return 0;
1227}
1228
1229/**
1230 * ata_set_max_sectors - Set max sectors
1231 * @dev: target device
1232 * @new_sectors: new max sectors value to set for the device
1233 *
1234 * Set max sectors of @dev to @new_sectors.
1235 *
1236 * RETURNS:
1237 * 0 on success, -EACCES if command is aborted or denied (due to
1238 * previous non-volatile SET_MAX) by the drive. -EIO on other
1239 * errors.
1240 */
1241static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors)
1242{
1243 unsigned int err_mask;
1244 struct ata_taskfile tf;
1245 int lba48 = ata_id_has_lba48(dev->id);
1246
1247 new_sectors--;
1248
1249 ata_tf_init(dev, &tf);
1250
1251 tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
1252
1253 if (lba48) {
1254 tf.command = ATA_CMD_SET_MAX_EXT;
1255 tf.flags |= ATA_TFLAG_LBA48;
1256
1257 tf.hob_lbal = (new_sectors >> 24) & 0xff;
1258 tf.hob_lbam = (new_sectors >> 32) & 0xff;
1259 tf.hob_lbah = (new_sectors >> 40) & 0xff;
1260 } else {
1261 tf.command = ATA_CMD_SET_MAX;
1262
1263 tf.device |= (new_sectors >> 24) & 0xf;
1264 }
1265
1266 tf.protocol = ATA_PROT_NODATA;
1267 tf.device |= ATA_LBA;
1268
1269 tf.lbal = (new_sectors >> 0) & 0xff;
1270 tf.lbam = (new_sectors >> 8) & 0xff;
1271 tf.lbah = (new_sectors >> 16) & 0xff;
1272
1273 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
1274 if (err_mask) {
1275 ata_dev_warn(dev,
1276 "failed to set max address (err_mask=0x%x)\n",
1277 err_mask);
1278 if (err_mask == AC_ERR_DEV &&
1279 (tf.error & (ATA_ABORTED | ATA_IDNF)))
1280 return -EACCES;
1281 return -EIO;
1282 }
1283
1284 return 0;
1285}
1286
1287/**
1288 * ata_hpa_resize - Resize a device with an HPA set
1289 * @dev: Device to resize
1290 *
1291 * Read the size of an LBA28 or LBA48 disk with HPA features and resize
1292 * it if required to the full size of the media. The caller must check
1293 * the drive has the HPA feature set enabled.
1294 *
1295 * RETURNS:
1296 * 0 on success, -errno on failure.
1297 */
1298static int ata_hpa_resize(struct ata_device *dev)
1299{
1300 bool print_info = ata_dev_print_info(dev);
1301 bool unlock_hpa = ata_ignore_hpa || dev->flags & ATA_DFLAG_UNLOCK_HPA;
1302 u64 sectors = ata_id_n_sectors(dev->id);
1303 u64 native_sectors;
1304 int rc;
1305
1306 /* do we need to do it? */
1307 if ((dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC) ||
1308 !ata_id_has_lba(dev->id) || !ata_id_hpa_enabled(dev->id) ||
1309 (dev->horkage & ATA_HORKAGE_BROKEN_HPA))
1310 return 0;
1311
1312 /* read native max address */
1313 rc = ata_read_native_max_address(dev, &native_sectors);
1314 if (rc) {
1315 /* If device aborted the command or HPA isn't going to
1316 * be unlocked, skip HPA resizing.
1317 */
1318 if (rc == -EACCES || !unlock_hpa) {
1319 ata_dev_warn(dev,
1320 "HPA support seems broken, skipping HPA handling\n");
1321 dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
1322
1323 /* we can continue if device aborted the command */
1324 if (rc == -EACCES)
1325 rc = 0;
1326 }
1327
1328 return rc;
1329 }
1330 dev->n_native_sectors = native_sectors;
1331
1332 /* nothing to do? */
1333 if (native_sectors <= sectors || !unlock_hpa) {
1334 if (!print_info || native_sectors == sectors)
1335 return 0;
1336
1337 if (native_sectors > sectors)
1338 ata_dev_info(dev,
1339 "HPA detected: current %llu, native %llu\n",
1340 (unsigned long long)sectors,
1341 (unsigned long long)native_sectors);
1342 else if (native_sectors < sectors)
1343 ata_dev_warn(dev,
1344 "native sectors (%llu) is smaller than sectors (%llu)\n",
1345 (unsigned long long)native_sectors,
1346 (unsigned long long)sectors);
1347 return 0;
1348 }
1349
1350 /* let's unlock HPA */
1351 rc = ata_set_max_sectors(dev, native_sectors);
1352 if (rc == -EACCES) {
1353 /* if device aborted the command, skip HPA resizing */
1354 ata_dev_warn(dev,
1355 "device aborted resize (%llu -> %llu), skipping HPA handling\n",
1356 (unsigned long long)sectors,
1357 (unsigned long long)native_sectors);
1358 dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
1359 return 0;
1360 } else if (rc)
1361 return rc;
1362
1363 /* re-read IDENTIFY data */
1364 rc = ata_dev_reread_id(dev, 0);
1365 if (rc) {
1366 ata_dev_err(dev,
1367 "failed to re-read IDENTIFY data after HPA resizing\n");
1368 return rc;
1369 }
1370
1371 if (print_info) {
1372 u64 new_sectors = ata_id_n_sectors(dev->id);
1373 ata_dev_info(dev,
1374 "HPA unlocked: %llu -> %llu, native %llu\n",
1375 (unsigned long long)sectors,
1376 (unsigned long long)new_sectors,
1377 (unsigned long long)native_sectors);
1378 }
1379
1380 return 0;
1381}
1382
1383/**
1384 * ata_dump_id - IDENTIFY DEVICE info debugging output
1385 * @dev: device from which the information is fetched
1386 * @id: IDENTIFY DEVICE page to dump
1387 *
1388 * Dump selected 16-bit words from the given IDENTIFY DEVICE
1389 * page.
1390 *
1391 * LOCKING:
1392 * caller.
1393 */
1394
1395static inline void ata_dump_id(struct ata_device *dev, const u16 *id)
1396{
1397 ata_dev_dbg(dev,
1398 "49==0x%04x 53==0x%04x 63==0x%04x 64==0x%04x 75==0x%04x\n"
1399 "80==0x%04x 81==0x%04x 82==0x%04x 83==0x%04x 84==0x%04x\n"
1400 "88==0x%04x 93==0x%04x\n",
1401 id[49], id[53], id[63], id[64], id[75], id[80],
1402 id[81], id[82], id[83], id[84], id[88], id[93]);
1403}
1404
1405/**
1406 * ata_id_xfermask - Compute xfermask from the given IDENTIFY data
1407 * @id: IDENTIFY data to compute xfer mask from
1408 *
1409 * Compute the xfermask for this device. This is not as trivial
1410 * as it seems if we must consider early devices correctly.
1411 *
1412 * FIXME: pre IDE drive timing (do we care ?).
1413 *
1414 * LOCKING:
1415 * None.
1416 *
1417 * RETURNS:
1418 * Computed xfermask
1419 */
1420unsigned int ata_id_xfermask(const u16 *id)
1421{
1422 unsigned int pio_mask, mwdma_mask, udma_mask;
1423
1424 /* Usual case. Word 53 indicates word 64 is valid */
1425 if (id[ATA_ID_FIELD_VALID] & (1 << 1)) {
1426 pio_mask = id[ATA_ID_PIO_MODES] & 0x03;
1427 pio_mask <<= 3;
1428 pio_mask |= 0x7;
1429 } else {
1430 /* If word 64 isn't valid then Word 51 high byte holds
1431 * the PIO timing number for the maximum. Turn it into
1432 * a mask.
1433 */
1434 u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF;
1435 if (mode < 5) /* Valid PIO range */
1436 pio_mask = (2 << mode) - 1;
1437 else
1438 pio_mask = 1;
1439
1440 /* But wait.. there's more. Design your standards by
1441 * committee and you too can get a free iordy field to
1442 * process. However it is the speeds not the modes that
1443 * are supported... Note drivers using the timing API
1444 * will get this right anyway
1445 */
1446 }
1447
1448 mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07;
1449
1450 if (ata_id_is_cfa(id)) {
1451 /*
1452 * Process compact flash extended modes
1453 */
1454 int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7;
1455 int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7;
1456
1457 if (pio)
1458 pio_mask |= (1 << 5);
1459 if (pio > 1)
1460 pio_mask |= (1 << 6);
1461 if (dma)
1462 mwdma_mask |= (1 << 3);
1463 if (dma > 1)
1464 mwdma_mask |= (1 << 4);
1465 }
1466
1467 udma_mask = 0;
1468 if (id[ATA_ID_FIELD_VALID] & (1 << 2))
1469 udma_mask = id[ATA_ID_UDMA_MODES] & 0xff;
1470
1471 return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
1472}
1473EXPORT_SYMBOL_GPL(ata_id_xfermask);
1474
1475static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
1476{
1477 struct completion *waiting = qc->private_data;
1478
1479 complete(waiting);
1480}
1481
1482/**
1483 * ata_exec_internal_sg - execute libata internal command
1484 * @dev: Device to which the command is sent
1485 * @tf: Taskfile registers for the command and the result
1486 * @cdb: CDB for packet command
1487 * @dma_dir: Data transfer direction of the command
1488 * @sgl: sg list for the data buffer of the command
1489 * @n_elem: Number of sg entries
1490 * @timeout: Timeout in msecs (0 for default)
1491 *
1492 * Executes libata internal command with timeout. @tf contains
1493 * command on entry and result on return. Timeout and error
1494 * conditions are reported via return value. No recovery action
1495 * is taken after a command times out. It's caller's duty to
1496 * clean up after timeout.
1497 *
1498 * LOCKING:
1499 * None. Should be called with kernel context, might sleep.
1500 *
1501 * RETURNS:
1502 * Zero on success, AC_ERR_* mask on failure
1503 */
1504static unsigned ata_exec_internal_sg(struct ata_device *dev,
1505 struct ata_taskfile *tf, const u8 *cdb,
1506 int dma_dir, struct scatterlist *sgl,
1507 unsigned int n_elem, unsigned int timeout)
1508{
1509 struct ata_link *link = dev->link;
1510 struct ata_port *ap = link->ap;
1511 u8 command = tf->command;
1512 int auto_timeout = 0;
1513 struct ata_queued_cmd *qc;
1514 unsigned int preempted_tag;
1515 u32 preempted_sactive;
1516 u64 preempted_qc_active;
1517 int preempted_nr_active_links;
1518 DECLARE_COMPLETION_ONSTACK(wait);
1519 unsigned long flags;
1520 unsigned int err_mask;
1521 int rc;
1522
1523 spin_lock_irqsave(ap->lock, flags);
1524
1525 /* no internal command while frozen */
1526 if (ata_port_is_frozen(ap)) {
1527 spin_unlock_irqrestore(ap->lock, flags);
1528 return AC_ERR_SYSTEM;
1529 }
1530
1531 /* initialize internal qc */
1532 qc = __ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
1533
1534 qc->tag = ATA_TAG_INTERNAL;
1535 qc->hw_tag = 0;
1536 qc->scsicmd = NULL;
1537 qc->ap = ap;
1538 qc->dev = dev;
1539 ata_qc_reinit(qc);
1540
1541 preempted_tag = link->active_tag;
1542 preempted_sactive = link->sactive;
1543 preempted_qc_active = ap->qc_active;
1544 preempted_nr_active_links = ap->nr_active_links;
1545 link->active_tag = ATA_TAG_POISON;
1546 link->sactive = 0;
1547 ap->qc_active = 0;
1548 ap->nr_active_links = 0;
1549
1550 /* prepare & issue qc */
1551 qc->tf = *tf;
1552 if (cdb)
1553 memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);
1554
1555 /* some SATA bridges need us to indicate data xfer direction */
1556 if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) &&
1557 dma_dir == DMA_FROM_DEVICE)
1558 qc->tf.feature |= ATAPI_DMADIR;
1559
1560 qc->flags |= ATA_QCFLAG_RESULT_TF;
1561 qc->dma_dir = dma_dir;
1562 if (dma_dir != DMA_NONE) {
1563 unsigned int i, buflen = 0;
1564 struct scatterlist *sg;
1565
1566 for_each_sg(sgl, sg, n_elem, i)
1567 buflen += sg->length;
1568
1569 ata_sg_init(qc, sgl, n_elem);
1570 qc->nbytes = buflen;
1571 }
1572
1573 qc->private_data = &wait;
1574 qc->complete_fn = ata_qc_complete_internal;
1575
1576 ata_qc_issue(qc);
1577
1578 spin_unlock_irqrestore(ap->lock, flags);
1579
1580 if (!timeout) {
1581 if (ata_probe_timeout)
1582 timeout = ata_probe_timeout * 1000;
1583 else {
1584 timeout = ata_internal_cmd_timeout(dev, command);
1585 auto_timeout = 1;
1586 }
1587 }
1588
1589 ata_eh_release(ap);
1590
1591 rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
1592
1593 ata_eh_acquire(ap);
1594
1595 ata_sff_flush_pio_task(ap);
1596
1597 if (!rc) {
1598 spin_lock_irqsave(ap->lock, flags);
1599
1600 /* We're racing with irq here. If we lose, the
1601 * following test prevents us from completing the qc
1602 * twice. If we win, the port is frozen and will be
1603 * cleaned up by ->post_internal_cmd().
1604 */
1605 if (qc->flags & ATA_QCFLAG_ACTIVE) {
1606 qc->err_mask |= AC_ERR_TIMEOUT;
1607
1608 ata_port_freeze(ap);
1609
1610 ata_dev_warn(dev, "qc timeout after %u msecs (cmd 0x%x)\n",
1611 timeout, command);
1612 }
1613
1614 spin_unlock_irqrestore(ap->lock, flags);
1615 }
1616
1617 /* do post_internal_cmd */
1618 if (ap->ops->post_internal_cmd)
1619 ap->ops->post_internal_cmd(qc);
1620
1621 /* perform minimal error analysis */
1622 if (qc->flags & ATA_QCFLAG_EH) {
1623 if (qc->result_tf.status & (ATA_ERR | ATA_DF))
1624 qc->err_mask |= AC_ERR_DEV;
1625
1626 if (!qc->err_mask)
1627 qc->err_mask |= AC_ERR_OTHER;
1628
1629 if (qc->err_mask & ~AC_ERR_OTHER)
1630 qc->err_mask &= ~AC_ERR_OTHER;
1631 } else if (qc->tf.command == ATA_CMD_REQ_SENSE_DATA) {
1632 qc->result_tf.status |= ATA_SENSE;
1633 }
1634
1635 /* finish up */
1636 spin_lock_irqsave(ap->lock, flags);
1637
1638 *tf = qc->result_tf;
1639 err_mask = qc->err_mask;
1640
1641 ata_qc_free(qc);
1642 link->active_tag = preempted_tag;
1643 link->sactive = preempted_sactive;
1644 ap->qc_active = preempted_qc_active;
1645 ap->nr_active_links = preempted_nr_active_links;
1646
1647 spin_unlock_irqrestore(ap->lock, flags);
1648
1649 if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout)
1650 ata_internal_cmd_timed_out(dev, command);
1651
1652 return err_mask;
1653}
1654
1655/**
1656 * ata_exec_internal - execute libata internal command
1657 * @dev: Device to which the command is sent
1658 * @tf: Taskfile registers for the command and the result
1659 * @cdb: CDB for packet command
1660 * @dma_dir: Data transfer direction of the command
1661 * @buf: Data buffer of the command
1662 * @buflen: Length of data buffer
1663 * @timeout: Timeout in msecs (0 for default)
1664 *
1665 * Wrapper around ata_exec_internal_sg() which takes simple
1666 * buffer instead of sg list.
1667 *
1668 * LOCKING:
1669 * None. Should be called with kernel context, might sleep.
1670 *
1671 * RETURNS:
1672 * Zero on success, AC_ERR_* mask on failure
1673 */
1674unsigned ata_exec_internal(struct ata_device *dev,
1675 struct ata_taskfile *tf, const u8 *cdb,
1676 int dma_dir, void *buf, unsigned int buflen,
1677 unsigned int timeout)
1678{
1679 struct scatterlist *psg = NULL, sg;
1680 unsigned int n_elem = 0;
1681
1682 if (dma_dir != DMA_NONE) {
1683 WARN_ON(!buf);
1684 sg_init_one(&sg, buf, buflen);
1685 psg = &sg;
1686 n_elem++;
1687 }
1688
1689 return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem,
1690 timeout);
1691}
1692
1693/**
1694 * ata_pio_need_iordy - check if iordy needed
1695 * @adev: ATA device
1696 *
1697 * Check if the current speed of the device requires IORDY. Used
1698 * by various controllers for chip configuration.
1699 */
1700unsigned int ata_pio_need_iordy(const struct ata_device *adev)
1701{
1702 /* Don't set IORDY if we're preparing for reset. IORDY may
1703 * lead to controller lock up on certain controllers if the
1704 * port is not occupied. See bko#11703 for details.
1705 */
1706 if (adev->link->ap->pflags & ATA_PFLAG_RESETTING)
1707 return 0;
1708 /* Controller doesn't support IORDY. Probably a pointless
1709 * check as the caller should know this.
1710 */
1711 if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
1712 return 0;
1713 /* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */
1714 if (ata_id_is_cfa(adev->id)
1715 && (adev->pio_mode == XFER_PIO_5 || adev->pio_mode == XFER_PIO_6))
1716 return 0;
1717 /* PIO3 and higher it is mandatory */
1718 if (adev->pio_mode > XFER_PIO_2)
1719 return 1;
1720 /* We turn it on when possible */
1721 if (ata_id_has_iordy(adev->id))
1722 return 1;
1723 return 0;
1724}
1725EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
1726
1727/**
1728 * ata_pio_mask_no_iordy - Return the non IORDY mask
1729 * @adev: ATA device
1730 *
1731 * Compute the highest mode possible if we are not using iordy. Return
1732 * -1 if no iordy mode is available.
1733 */
1734static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
1735{
1736 /* If we have no drive specific rule, then PIO 2 is non IORDY */
1737 if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */
1738 u16 pio = adev->id[ATA_ID_EIDE_PIO];
1739 /* Is the speed faster than the drive allows non IORDY ? */
1740 if (pio) {
1741 /* This is cycle times not frequency - watch the logic! */
1742 if (pio > 240) /* PIO2 is 240nS per cycle */
1743 return 3 << ATA_SHIFT_PIO;
1744 return 7 << ATA_SHIFT_PIO;
1745 }
1746 }
1747 return 3 << ATA_SHIFT_PIO;
1748}
1749
1750/**
1751 * ata_do_dev_read_id - default ID read method
1752 * @dev: device
1753 * @tf: proposed taskfile
1754 * @id: data buffer
1755 *
1756 * Issue the identify taskfile and hand back the buffer containing
1757 * identify data. For some RAID controllers and for pre ATA devices
1758 * this function is wrapped or replaced by the driver
1759 */
1760unsigned int ata_do_dev_read_id(struct ata_device *dev,
1761 struct ata_taskfile *tf, __le16 *id)
1762{
1763 return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
1764 id, sizeof(id[0]) * ATA_ID_WORDS, 0);
1765}
1766EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
1767
1768/**
1769 * ata_dev_read_id - Read ID data from the specified device
1770 * @dev: target device
1771 * @p_class: pointer to class of the target device (may be changed)
1772 * @flags: ATA_READID_* flags
1773 * @id: buffer to read IDENTIFY data into
1774 *
1775 * Read ID data from the specified device. ATA_CMD_ID_ATA is
1776 * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI
1777 * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS
1778 * for pre-ATA4 drives.
1779 *
1780 * FIXME: ATA_CMD_ID_ATA is optional for early drives and right
1781 * now we abort if we hit that case.
1782 *
1783 * LOCKING:
1784 * Kernel thread context (may sleep)
1785 *
1786 * RETURNS:
1787 * 0 on success, -errno otherwise.
1788 */
1789int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
1790 unsigned int flags, u16 *id)
1791{
1792 struct ata_port *ap = dev->link->ap;
1793 unsigned int class = *p_class;
1794 struct ata_taskfile tf;
1795 unsigned int err_mask = 0;
1796 const char *reason;
1797 bool is_semb = class == ATA_DEV_SEMB;
1798 int may_fallback = 1, tried_spinup = 0;
1799 int rc;
1800
1801retry:
1802 ata_tf_init(dev, &tf);
1803
1804 switch (class) {
1805 case ATA_DEV_SEMB:
1806 class = ATA_DEV_ATA; /* some hard drives report SEMB sig */
1807 fallthrough;
1808 case ATA_DEV_ATA:
1809 case ATA_DEV_ZAC:
1810 tf.command = ATA_CMD_ID_ATA;
1811 break;
1812 case ATA_DEV_ATAPI:
1813 tf.command = ATA_CMD_ID_ATAPI;
1814 break;
1815 default:
1816 rc = -ENODEV;
1817 reason = "unsupported class";
1818 goto err_out;
1819 }
1820
1821 tf.protocol = ATA_PROT_PIO;
1822
1823 /* Some devices choke if TF registers contain garbage. Make
1824 * sure those are properly initialized.
1825 */
1826 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
1827
1828 /* Device presence detection is unreliable on some
1829 * controllers. Always poll IDENTIFY if available.
1830 */
1831 tf.flags |= ATA_TFLAG_POLLING;
1832
1833 if (ap->ops->read_id)
1834 err_mask = ap->ops->read_id(dev, &tf, (__le16 *)id);
1835 else
1836 err_mask = ata_do_dev_read_id(dev, &tf, (__le16 *)id);
1837
1838 if (err_mask) {
1839 if (err_mask & AC_ERR_NODEV_HINT) {
1840 ata_dev_dbg(dev, "NODEV after polling detection\n");
1841 return -ENOENT;
1842 }
1843
1844 if (is_semb) {
1845 ata_dev_info(dev,
1846 "IDENTIFY failed on device w/ SEMB sig, disabled\n");
1847 /* SEMB is not supported yet */
1848 *p_class = ATA_DEV_SEMB_UNSUP;
1849 return 0;
1850 }
1851
1852 if ((err_mask == AC_ERR_DEV) && (tf.error & ATA_ABORTED)) {
1853 /* Device or controller might have reported
1854 * the wrong device class. Give a shot at the
1855 * other IDENTIFY if the current one is
1856 * aborted by the device.
1857 */
1858 if (may_fallback) {
1859 may_fallback = 0;
1860
1861 if (class == ATA_DEV_ATA)
1862 class = ATA_DEV_ATAPI;
1863 else
1864 class = ATA_DEV_ATA;
1865 goto retry;
1866 }
1867
1868 /* Control reaches here iff the device aborted
1869 * both flavors of IDENTIFYs which happens
1870 * sometimes with phantom devices.
1871 */
1872 ata_dev_dbg(dev,
1873 "both IDENTIFYs aborted, assuming NODEV\n");
1874 return -ENOENT;
1875 }
1876
1877 rc = -EIO;
1878 reason = "I/O error";
1879 goto err_out;
1880 }
1881
1882 if (dev->horkage & ATA_HORKAGE_DUMP_ID) {
1883 ata_dev_info(dev, "dumping IDENTIFY data, "
1884 "class=%d may_fallback=%d tried_spinup=%d\n",
1885 class, may_fallback, tried_spinup);
1886 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET,
1887 16, 2, id, ATA_ID_WORDS * sizeof(*id), true);
1888 }
1889
1890 /* Falling back doesn't make sense if ID data was read
1891 * successfully at least once.
1892 */
1893 may_fallback = 0;
1894
1895 swap_buf_le16(id, ATA_ID_WORDS);
1896
1897 /* sanity check */
1898 rc = -EINVAL;
1899 reason = "device reports invalid type";
1900
1901 if (class == ATA_DEV_ATA || class == ATA_DEV_ZAC) {
1902 if (!ata_id_is_ata(id) && !ata_id_is_cfa(id))
1903 goto err_out;
1904 if (ap->host->flags & ATA_HOST_IGNORE_ATA &&
1905 ata_id_is_ata(id)) {
1906 ata_dev_dbg(dev,
1907 "host indicates ignore ATA devices, ignored\n");
1908 return -ENOENT;
1909 }
1910 } else {
1911 if (ata_id_is_ata(id))
1912 goto err_out;
1913 }
1914
1915 if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) {
1916 tried_spinup = 1;
1917 /*
1918 * Drive powered-up in standby mode, and requires a specific
1919 * SET_FEATURES spin-up subcommand before it will accept
1920 * anything other than the original IDENTIFY command.
1921 */
1922 err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0);
1923 if (err_mask && id[2] != 0x738c) {
1924 rc = -EIO;
1925 reason = "SPINUP failed";
1926 goto err_out;
1927 }
1928 /*
1929 * If the drive initially returned incomplete IDENTIFY info,
1930 * we now must reissue the IDENTIFY command.
1931 */
1932 if (id[2] == 0x37c8)
1933 goto retry;
1934 }
1935
1936 if ((flags & ATA_READID_POSTRESET) &&
1937 (class == ATA_DEV_ATA || class == ATA_DEV_ZAC)) {
1938 /*
1939 * The exact sequence expected by certain pre-ATA4 drives is:
1940 * SRST RESET
1941 * IDENTIFY (optional in early ATA)
1942 * INITIALIZE DEVICE PARAMETERS (later IDE and ATA)
1943 * anything else..
1944 * Some drives were very specific about that exact sequence.
1945 *
1946 * Note that ATA4 says lba is mandatory so the second check
1947 * should never trigger.
1948 */
1949 if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
1950 err_mask = ata_dev_init_params(dev, id[3], id[6]);
1951 if (err_mask) {
1952 rc = -EIO;
1953 reason = "INIT_DEV_PARAMS failed";
1954 goto err_out;
1955 }
1956
1957 /* current CHS translation info (id[53-58]) might be
1958 * changed. reread the identify device info.
1959 */
1960 flags &= ~ATA_READID_POSTRESET;
1961 goto retry;
1962 }
1963 }
1964
1965 *p_class = class;
1966
1967 return 0;
1968
1969 err_out:
1970 ata_dev_warn(dev, "failed to IDENTIFY (%s, err_mask=0x%x)\n",
1971 reason, err_mask);
1972 return rc;
1973}
1974
1975bool ata_dev_power_init_tf(struct ata_device *dev, struct ata_taskfile *tf,
1976 bool set_active)
1977{
1978 /* Only applies to ATA and ZAC devices */
1979 if (dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC)
1980 return false;
1981
1982 ata_tf_init(dev, tf);
1983 tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
1984 tf->protocol = ATA_PROT_NODATA;
1985
1986 if (set_active) {
1987 /* VERIFY for 1 sector at lba=0 */
1988 tf->command = ATA_CMD_VERIFY;
1989 tf->nsect = 1;
1990 if (dev->flags & ATA_DFLAG_LBA) {
1991 tf->flags |= ATA_TFLAG_LBA;
1992 tf->device |= ATA_LBA;
1993 } else {
1994 /* CHS */
1995 tf->lbal = 0x1; /* sect */
1996 }
1997 } else {
1998 tf->command = ATA_CMD_STANDBYNOW1;
1999 }
2000
2001 return true;
2002}
2003
2004static bool ata_dev_power_is_active(struct ata_device *dev)
2005{
2006 struct ata_taskfile tf;
2007 unsigned int err_mask;
2008
2009 ata_tf_init(dev, &tf);
2010 tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
2011 tf.protocol = ATA_PROT_NODATA;
2012 tf.command = ATA_CMD_CHK_POWER;
2013
2014 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
2015 if (err_mask) {
2016 ata_dev_err(dev, "Check power mode failed (err_mask=0x%x)\n",
2017 err_mask);
2018 /*
2019 * Assume we are in standby mode so that we always force a
2020 * spinup in ata_dev_power_set_active().
2021 */
2022 return false;
2023 }
2024
2025 ata_dev_dbg(dev, "Power mode: 0x%02x\n", tf.nsect);
2026
2027 /* Active or idle */
2028 return tf.nsect == 0xff;
2029}
2030
2031/**
2032 * ata_dev_power_set_standby - Set a device power mode to standby
2033 * @dev: target device
2034 *
2035 * Issue a STANDBY IMMEDIATE command to set a device power mode to standby.
2036 * For an HDD device, this spins down the disks.
2037 *
2038 * LOCKING:
2039 * Kernel thread context (may sleep).
2040 */
2041void ata_dev_power_set_standby(struct ata_device *dev)
2042{
2043 unsigned long ap_flags = dev->link->ap->flags;
2044 struct ata_taskfile tf;
2045 unsigned int err_mask;
2046
2047 /* If the device is already sleeping or in standby, do nothing. */
2048 if ((dev->flags & ATA_DFLAG_SLEEPING) ||
2049 !ata_dev_power_is_active(dev))
2050 return;
2051
2052 /*
2053 * Some odd clown BIOSes issue spindown on power off (ACPI S4 or S5)
2054 * causing some drives to spin up and down again. For these, do nothing
2055 * if we are being called on shutdown.
2056 */
2057 if ((ap_flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) &&
2058 system_state == SYSTEM_POWER_OFF)
2059 return;
2060
2061 if ((ap_flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) &&
2062 system_entering_hibernation())
2063 return;
2064
2065 /* Issue STANDBY IMMEDIATE command only if supported by the device */
2066 if (!ata_dev_power_init_tf(dev, &tf, false))
2067 return;
2068
2069 ata_dev_notice(dev, "Entering standby power mode\n");
2070
2071 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
2072 if (err_mask)
2073 ata_dev_err(dev, "STANDBY IMMEDIATE failed (err_mask=0x%x)\n",
2074 err_mask);
2075}
2076
2077/**
2078 * ata_dev_power_set_active - Set a device power mode to active
2079 * @dev: target device
2080 *
2081 * Issue a VERIFY command to enter to ensure that the device is in the
2082 * active power mode. For a spun-down HDD (standby or idle power mode),
2083 * the VERIFY command will complete after the disk spins up.
2084 *
2085 * LOCKING:
2086 * Kernel thread context (may sleep).
2087 */
2088void ata_dev_power_set_active(struct ata_device *dev)
2089{
2090 struct ata_taskfile tf;
2091 unsigned int err_mask;
2092
2093 /*
2094 * Issue READ VERIFY SECTORS command for 1 sector at lba=0 only
2095 * if supported by the device.
2096 */
2097 if (!ata_dev_power_init_tf(dev, &tf, true))
2098 return;
2099
2100 /*
2101 * Check the device power state & condition and force a spinup with
2102 * VERIFY command only if the drive is not already ACTIVE or IDLE.
2103 */
2104 if (ata_dev_power_is_active(dev))
2105 return;
2106
2107 ata_dev_notice(dev, "Entering active power mode\n");
2108
2109 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
2110 if (err_mask)
2111 ata_dev_err(dev, "VERIFY failed (err_mask=0x%x)\n",
2112 err_mask);
2113}
2114
2115/**
2116 * ata_read_log_page - read a specific log page
2117 * @dev: target device
2118 * @log: log to read
2119 * @page: page to read
2120 * @buf: buffer to store read page
2121 * @sectors: number of sectors to read
2122 *
2123 * Read log page using READ_LOG_EXT command.
2124 *
2125 * LOCKING:
2126 * Kernel thread context (may sleep).
2127 *
2128 * RETURNS:
2129 * 0 on success, AC_ERR_* mask otherwise.
2130 */
2131unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
2132 u8 page, void *buf, unsigned int sectors)
2133{
2134 unsigned long ap_flags = dev->link->ap->flags;
2135 struct ata_taskfile tf;
2136 unsigned int err_mask;
2137 bool dma = false;
2138
2139 ata_dev_dbg(dev, "read log page - log 0x%x, page 0x%x\n", log, page);
2140
2141 /*
2142 * Return error without actually issuing the command on controllers
2143 * which e.g. lockup on a read log page.
2144 */
2145 if (ap_flags & ATA_FLAG_NO_LOG_PAGE)
2146 return AC_ERR_DEV;
2147
2148retry:
2149 ata_tf_init(dev, &tf);
2150 if (ata_dma_enabled(dev) && ata_id_has_read_log_dma_ext(dev->id) &&
2151 !(dev->horkage & ATA_HORKAGE_NO_DMA_LOG)) {
2152 tf.command = ATA_CMD_READ_LOG_DMA_EXT;
2153 tf.protocol = ATA_PROT_DMA;
2154 dma = true;
2155 } else {
2156 tf.command = ATA_CMD_READ_LOG_EXT;
2157 tf.protocol = ATA_PROT_PIO;
2158 dma = false;
2159 }
2160 tf.lbal = log;
2161 tf.lbam = page;
2162 tf.nsect = sectors;
2163 tf.hob_nsect = sectors >> 8;
2164 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
2165
2166 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
2167 buf, sectors * ATA_SECT_SIZE, 0);
2168
2169 if (err_mask) {
2170 if (dma) {
2171 dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
2172 if (!ata_port_is_frozen(dev->link->ap))
2173 goto retry;
2174 }
2175 ata_dev_err(dev,
2176 "Read log 0x%02x page 0x%02x failed, Emask 0x%x\n",
2177 (unsigned int)log, (unsigned int)page, err_mask);
2178 }
2179
2180 return err_mask;
2181}
2182
2183static int ata_log_supported(struct ata_device *dev, u8 log)
2184{
2185 struct ata_port *ap = dev->link->ap;
2186
2187 if (dev->horkage & ATA_HORKAGE_NO_LOG_DIR)
2188 return 0;
2189
2190 if (ata_read_log_page(dev, ATA_LOG_DIRECTORY, 0, ap->sector_buf, 1))
2191 return 0;
2192 return get_unaligned_le16(&ap->sector_buf[log * 2]);
2193}
2194
2195static bool ata_identify_page_supported(struct ata_device *dev, u8 page)
2196{
2197 struct ata_port *ap = dev->link->ap;
2198 unsigned int err, i;
2199
2200 if (dev->horkage & ATA_HORKAGE_NO_ID_DEV_LOG)
2201 return false;
2202
2203 if (!ata_log_supported(dev, ATA_LOG_IDENTIFY_DEVICE)) {
2204 /*
2205 * IDENTIFY DEVICE data log is defined as mandatory starting
2206 * with ACS-3 (ATA version 10). Warn about the missing log
2207 * for drives which implement this ATA level or above.
2208 */
2209 if (ata_id_major_version(dev->id) >= 10)
2210 ata_dev_warn(dev,
2211 "ATA Identify Device Log not supported\n");
2212 dev->horkage |= ATA_HORKAGE_NO_ID_DEV_LOG;
2213 return false;
2214 }
2215
2216 /*
2217 * Read IDENTIFY DEVICE data log, page 0, to figure out if the page is
2218 * supported.
2219 */
2220 err = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE, 0, ap->sector_buf,
2221 1);
2222 if (err)
2223 return false;
2224
2225 for (i = 0; i < ap->sector_buf[8]; i++) {
2226 if (ap->sector_buf[9 + i] == page)
2227 return true;
2228 }
2229
2230 return false;
2231}
2232
2233static int ata_do_link_spd_horkage(struct ata_device *dev)
2234{
2235 struct ata_link *plink = ata_dev_phys_link(dev);
2236 u32 target, target_limit;
2237
2238 if (!sata_scr_valid(plink))
2239 return 0;
2240
2241 if (dev->horkage & ATA_HORKAGE_1_5_GBPS)
2242 target = 1;
2243 else
2244 return 0;
2245
2246 target_limit = (1 << target) - 1;
2247
2248 /* if already on stricter limit, no need to push further */
2249 if (plink->sata_spd_limit <= target_limit)
2250 return 0;
2251
2252 plink->sata_spd_limit = target_limit;
2253
2254 /* Request another EH round by returning -EAGAIN if link is
2255 * going faster than the target speed. Forward progress is
2256 * guaranteed by setting sata_spd_limit to target_limit above.
2257 */
2258 if (plink->sata_spd > target) {
2259 ata_dev_info(dev, "applying link speed limit horkage to %s\n",
2260 sata_spd_string(target));
2261 return -EAGAIN;
2262 }
2263 return 0;
2264}
2265
2266static inline u8 ata_dev_knobble(struct ata_device *dev)
2267{
2268 struct ata_port *ap = dev->link->ap;
2269
2270 if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK)
2271 return 0;
2272
2273 return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
2274}
2275
2276static void ata_dev_config_ncq_send_recv(struct ata_device *dev)
2277{
2278 struct ata_port *ap = dev->link->ap;
2279 unsigned int err_mask;
2280
2281 if (!ata_log_supported(dev, ATA_LOG_NCQ_SEND_RECV)) {
2282 ata_dev_warn(dev, "NCQ Send/Recv Log not supported\n");
2283 return;
2284 }
2285 err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_SEND_RECV,
2286 0, ap->sector_buf, 1);
2287 if (!err_mask) {
2288 u8 *cmds = dev->ncq_send_recv_cmds;
2289
2290 dev->flags |= ATA_DFLAG_NCQ_SEND_RECV;
2291 memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE);
2292
2293 if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) {
2294 ata_dev_dbg(dev, "disabling queued TRIM support\n");
2295 cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &=
2296 ~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM;
2297 }
2298 }
2299}
2300
2301static void ata_dev_config_ncq_non_data(struct ata_device *dev)
2302{
2303 struct ata_port *ap = dev->link->ap;
2304 unsigned int err_mask;
2305
2306 if (!ata_log_supported(dev, ATA_LOG_NCQ_NON_DATA)) {
2307 ata_dev_warn(dev,
2308 "NCQ Send/Recv Log not supported\n");
2309 return;
2310 }
2311 err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_NON_DATA,
2312 0, ap->sector_buf, 1);
2313 if (!err_mask) {
2314 u8 *cmds = dev->ncq_non_data_cmds;
2315
2316 memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_NON_DATA_SIZE);
2317 }
2318}
2319
2320static void ata_dev_config_ncq_prio(struct ata_device *dev)
2321{
2322 struct ata_port *ap = dev->link->ap;
2323 unsigned int err_mask;
2324
2325 if (!ata_identify_page_supported(dev, ATA_LOG_SATA_SETTINGS))
2326 return;
2327
2328 err_mask = ata_read_log_page(dev,
2329 ATA_LOG_IDENTIFY_DEVICE,
2330 ATA_LOG_SATA_SETTINGS,
2331 ap->sector_buf,
2332 1);
2333 if (err_mask)
2334 goto not_supported;
2335
2336 if (!(ap->sector_buf[ATA_LOG_NCQ_PRIO_OFFSET] & BIT(3)))
2337 goto not_supported;
2338
2339 dev->flags |= ATA_DFLAG_NCQ_PRIO;
2340
2341 return;
2342
2343not_supported:
2344 dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLED;
2345 dev->flags &= ~ATA_DFLAG_NCQ_PRIO;
2346}
2347
2348static bool ata_dev_check_adapter(struct ata_device *dev,
2349 unsigned short vendor_id)
2350{
2351 struct pci_dev *pcidev = NULL;
2352 struct device *parent_dev = NULL;
2353
2354 for (parent_dev = dev->tdev.parent; parent_dev != NULL;
2355 parent_dev = parent_dev->parent) {
2356 if (dev_is_pci(parent_dev)) {
2357 pcidev = to_pci_dev(parent_dev);
2358 if (pcidev->vendor == vendor_id)
2359 return true;
2360 break;
2361 }
2362 }
2363
2364 return false;
2365}
2366
2367static int ata_dev_config_ncq(struct ata_device *dev,
2368 char *desc, size_t desc_sz)
2369{
2370 struct ata_port *ap = dev->link->ap;
2371 int hdepth = 0, ddepth = ata_id_queue_depth(dev->id);
2372 unsigned int err_mask;
2373 char *aa_desc = "";
2374
2375 if (!ata_id_has_ncq(dev->id)) {
2376 desc[0] = '\0';
2377 return 0;
2378 }
2379 if (!IS_ENABLED(CONFIG_SATA_HOST))
2380 return 0;
2381 if (dev->horkage & ATA_HORKAGE_NONCQ) {
2382 snprintf(desc, desc_sz, "NCQ (not used)");
2383 return 0;
2384 }
2385
2386 if (dev->horkage & ATA_HORKAGE_NO_NCQ_ON_ATI &&
2387 ata_dev_check_adapter(dev, PCI_VENDOR_ID_ATI)) {
2388 snprintf(desc, desc_sz, "NCQ (not used)");
2389 return 0;
2390 }
2391
2392 if (ap->flags & ATA_FLAG_NCQ) {
2393 hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE);
2394 dev->flags |= ATA_DFLAG_NCQ;
2395 }
2396
2397 if (!(dev->horkage & ATA_HORKAGE_BROKEN_FPDMA_AA) &&
2398 (ap->flags & ATA_FLAG_FPDMA_AA) &&
2399 ata_id_has_fpdma_aa(dev->id)) {
2400 err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE,
2401 SATA_FPDMA_AA);
2402 if (err_mask) {
2403 ata_dev_err(dev,
2404 "failed to enable AA (error_mask=0x%x)\n",
2405 err_mask);
2406 if (err_mask != AC_ERR_DEV) {
2407 dev->horkage |= ATA_HORKAGE_BROKEN_FPDMA_AA;
2408 return -EIO;
2409 }
2410 } else
2411 aa_desc = ", AA";
2412 }
2413
2414 if (hdepth >= ddepth)
2415 snprintf(desc, desc_sz, "NCQ (depth %d)%s", ddepth, aa_desc);
2416 else
2417 snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
2418 ddepth, aa_desc);
2419
2420 if ((ap->flags & ATA_FLAG_FPDMA_AUX)) {
2421 if (ata_id_has_ncq_send_and_recv(dev->id))
2422 ata_dev_config_ncq_send_recv(dev);
2423 if (ata_id_has_ncq_non_data(dev->id))
2424 ata_dev_config_ncq_non_data(dev);
2425 if (ata_id_has_ncq_prio(dev->id))
2426 ata_dev_config_ncq_prio(dev);
2427 }
2428
2429 return 0;
2430}
2431
2432static void ata_dev_config_sense_reporting(struct ata_device *dev)
2433{
2434 unsigned int err_mask;
2435
2436 if (!ata_id_has_sense_reporting(dev->id))
2437 return;
2438
2439 if (ata_id_sense_reporting_enabled(dev->id))
2440 return;
2441
2442 err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1);
2443 if (err_mask) {
2444 ata_dev_dbg(dev,
2445 "failed to enable Sense Data Reporting, Emask 0x%x\n",
2446 err_mask);
2447 }
2448}
2449
2450static void ata_dev_config_zac(struct ata_device *dev)
2451{
2452 struct ata_port *ap = dev->link->ap;
2453 unsigned int err_mask;
2454 u8 *identify_buf = ap->sector_buf;
2455
2456 dev->zac_zones_optimal_open = U32_MAX;
2457 dev->zac_zones_optimal_nonseq = U32_MAX;
2458 dev->zac_zones_max_open = U32_MAX;
2459
2460 /*
2461 * Always set the 'ZAC' flag for Host-managed devices.
2462 */
2463 if (dev->class == ATA_DEV_ZAC)
2464 dev->flags |= ATA_DFLAG_ZAC;
2465 else if (ata_id_zoned_cap(dev->id) == 0x01)
2466 /*
2467 * Check for host-aware devices.
2468 */
2469 dev->flags |= ATA_DFLAG_ZAC;
2470
2471 if (!(dev->flags & ATA_DFLAG_ZAC))
2472 return;
2473
2474 if (!ata_identify_page_supported(dev, ATA_LOG_ZONED_INFORMATION)) {
2475 ata_dev_warn(dev,
2476 "ATA Zoned Information Log not supported\n");
2477 return;
2478 }
2479
2480 /*
2481 * Read IDENTIFY DEVICE data log, page 9 (Zoned-device information)
2482 */
2483 err_mask = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE,
2484 ATA_LOG_ZONED_INFORMATION,
2485 identify_buf, 1);
2486 if (!err_mask) {
2487 u64 zoned_cap, opt_open, opt_nonseq, max_open;
2488
2489 zoned_cap = get_unaligned_le64(&identify_buf[8]);
2490 if ((zoned_cap >> 63))
2491 dev->zac_zoned_cap = (zoned_cap & 1);
2492 opt_open = get_unaligned_le64(&identify_buf[24]);
2493 if ((opt_open >> 63))
2494 dev->zac_zones_optimal_open = (u32)opt_open;
2495 opt_nonseq = get_unaligned_le64(&identify_buf[32]);
2496 if ((opt_nonseq >> 63))
2497 dev->zac_zones_optimal_nonseq = (u32)opt_nonseq;
2498 max_open = get_unaligned_le64(&identify_buf[40]);
2499 if ((max_open >> 63))
2500 dev->zac_zones_max_open = (u32)max_open;
2501 }
2502}
2503
2504static void ata_dev_config_trusted(struct ata_device *dev)
2505{
2506 struct ata_port *ap = dev->link->ap;
2507 u64 trusted_cap;
2508 unsigned int err;
2509
2510 if (!ata_id_has_trusted(dev->id))
2511 return;
2512
2513 if (!ata_identify_page_supported(dev, ATA_LOG_SECURITY)) {
2514 ata_dev_warn(dev,
2515 "Security Log not supported\n");
2516 return;
2517 }
2518
2519 err = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE, ATA_LOG_SECURITY,
2520 ap->sector_buf, 1);
2521 if (err)
2522 return;
2523
2524 trusted_cap = get_unaligned_le64(&ap->sector_buf[40]);
2525 if (!(trusted_cap & (1ULL << 63))) {
2526 ata_dev_dbg(dev,
2527 "Trusted Computing capability qword not valid!\n");
2528 return;
2529 }
2530
2531 if (trusted_cap & (1 << 0))
2532 dev->flags |= ATA_DFLAG_TRUSTED;
2533}
2534
2535static void ata_dev_config_cdl(struct ata_device *dev)
2536{
2537 struct ata_port *ap = dev->link->ap;
2538 unsigned int err_mask;
2539 bool cdl_enabled;
2540 u64 val;
2541
2542 if (ata_id_major_version(dev->id) < 12)
2543 goto not_supported;
2544
2545 if (!ata_log_supported(dev, ATA_LOG_IDENTIFY_DEVICE) ||
2546 !ata_identify_page_supported(dev, ATA_LOG_SUPPORTED_CAPABILITIES) ||
2547 !ata_identify_page_supported(dev, ATA_LOG_CURRENT_SETTINGS))
2548 goto not_supported;
2549
2550 err_mask = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE,
2551 ATA_LOG_SUPPORTED_CAPABILITIES,
2552 ap->sector_buf, 1);
2553 if (err_mask)
2554 goto not_supported;
2555
2556 /* Check Command Duration Limit Supported bits */
2557 val = get_unaligned_le64(&ap->sector_buf[168]);
2558 if (!(val & BIT_ULL(63)) || !(val & BIT_ULL(0)))
2559 goto not_supported;
2560
2561 /* Warn the user if command duration guideline is not supported */
2562 if (!(val & BIT_ULL(1)))
2563 ata_dev_warn(dev,
2564 "Command duration guideline is not supported\n");
2565
2566 /*
2567 * We must have support for the sense data for successful NCQ commands
2568 * log indicated by the successful NCQ command sense data supported bit.
2569 */
2570 val = get_unaligned_le64(&ap->sector_buf[8]);
2571 if (!(val & BIT_ULL(63)) || !(val & BIT_ULL(47))) {
2572 ata_dev_warn(dev,
2573 "CDL supported but Successful NCQ Command Sense Data is not supported\n");
2574 goto not_supported;
2575 }
2576
2577 /* Without NCQ autosense, the successful NCQ commands log is useless. */
2578 if (!ata_id_has_ncq_autosense(dev->id)) {
2579 ata_dev_warn(dev,
2580 "CDL supported but NCQ autosense is not supported\n");
2581 goto not_supported;
2582 }
2583
2584 /*
2585 * If CDL is marked as enabled, make sure the feature is enabled too.
2586 * Conversely, if CDL is disabled, make sure the feature is turned off.
2587 */
2588 err_mask = ata_read_log_page(dev, ATA_LOG_IDENTIFY_DEVICE,
2589 ATA_LOG_CURRENT_SETTINGS,
2590 ap->sector_buf, 1);
2591 if (err_mask)
2592 goto not_supported;
2593
2594 val = get_unaligned_le64(&ap->sector_buf[8]);
2595 cdl_enabled = val & BIT_ULL(63) && val & BIT_ULL(21);
2596 if (dev->flags & ATA_DFLAG_CDL_ENABLED) {
2597 if (!cdl_enabled) {
2598 /* Enable CDL on the device */
2599 err_mask = ata_dev_set_feature(dev, SETFEATURES_CDL, 1);
2600 if (err_mask) {
2601 ata_dev_err(dev,
2602 "Enable CDL feature failed\n");
2603 goto not_supported;
2604 }
2605 }
2606 } else {
2607 if (cdl_enabled) {
2608 /* Disable CDL on the device */
2609 err_mask = ata_dev_set_feature(dev, SETFEATURES_CDL, 0);
2610 if (err_mask) {
2611 ata_dev_err(dev,
2612 "Disable CDL feature failed\n");
2613 goto not_supported;
2614 }
2615 }
2616 }
2617
2618 /*
2619 * While CDL itself has to be enabled using sysfs, CDL requires that
2620 * sense data for successful NCQ commands is enabled to work properly.
2621 * Just like ata_dev_config_sense_reporting(), enable it unconditionally
2622 * if supported.
2623 */
2624 if (!(val & BIT_ULL(63)) || !(val & BIT_ULL(18))) {
2625 err_mask = ata_dev_set_feature(dev,
2626 SETFEATURE_SENSE_DATA_SUCC_NCQ, 0x1);
2627 if (err_mask) {
2628 ata_dev_warn(dev,
2629 "failed to enable Sense Data for successful NCQ commands, Emask 0x%x\n",
2630 err_mask);
2631 goto not_supported;
2632 }
2633 }
2634
2635 /*
2636 * Allocate a buffer to handle reading the sense data for successful
2637 * NCQ Commands log page for commands using a CDL with one of the limit
2638 * policy set to 0xD (successful completion with sense data available
2639 * bit set).
2640 */
2641 if (!ap->ncq_sense_buf) {
2642 ap->ncq_sense_buf = kmalloc(ATA_LOG_SENSE_NCQ_SIZE, GFP_KERNEL);
2643 if (!ap->ncq_sense_buf)
2644 goto not_supported;
2645 }
2646
2647 /*
2648 * Command duration limits is supported: cache the CDL log page 18h
2649 * (command duration descriptors).
2650 */
2651 err_mask = ata_read_log_page(dev, ATA_LOG_CDL, 0, ap->sector_buf, 1);
2652 if (err_mask) {
2653 ata_dev_warn(dev, "Read Command Duration Limits log failed\n");
2654 goto not_supported;
2655 }
2656
2657 memcpy(dev->cdl, ap->sector_buf, ATA_LOG_CDL_SIZE);
2658 dev->flags |= ATA_DFLAG_CDL;
2659
2660 return;
2661
2662not_supported:
2663 dev->flags &= ~(ATA_DFLAG_CDL | ATA_DFLAG_CDL_ENABLED);
2664 kfree(ap->ncq_sense_buf);
2665 ap->ncq_sense_buf = NULL;
2666}
2667
2668static int ata_dev_config_lba(struct ata_device *dev)
2669{
2670 const u16 *id = dev->id;
2671 const char *lba_desc;
2672 char ncq_desc[32];
2673 int ret;
2674
2675 dev->flags |= ATA_DFLAG_LBA;
2676
2677 if (ata_id_has_lba48(id)) {
2678 lba_desc = "LBA48";
2679 dev->flags |= ATA_DFLAG_LBA48;
2680 if (dev->n_sectors >= (1UL << 28) &&
2681 ata_id_has_flush_ext(id))
2682 dev->flags |= ATA_DFLAG_FLUSH_EXT;
2683 } else {
2684 lba_desc = "LBA";
2685 }
2686
2687 /* config NCQ */
2688 ret = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
2689
2690 /* print device info to dmesg */
2691 if (ata_dev_print_info(dev))
2692 ata_dev_info(dev,
2693 "%llu sectors, multi %u: %s %s\n",
2694 (unsigned long long)dev->n_sectors,
2695 dev->multi_count, lba_desc, ncq_desc);
2696
2697 return ret;
2698}
2699
2700static void ata_dev_config_chs(struct ata_device *dev)
2701{
2702 const u16 *id = dev->id;
2703
2704 if (ata_id_current_chs_valid(id)) {
2705 /* Current CHS translation is valid. */
2706 dev->cylinders = id[54];
2707 dev->heads = id[55];
2708 dev->sectors = id[56];
2709 } else {
2710 /* Default translation */
2711 dev->cylinders = id[1];
2712 dev->heads = id[3];
2713 dev->sectors = id[6];
2714 }
2715
2716 /* print device info to dmesg */
2717 if (ata_dev_print_info(dev))
2718 ata_dev_info(dev,
2719 "%llu sectors, multi %u, CHS %u/%u/%u\n",
2720 (unsigned long long)dev->n_sectors,
2721 dev->multi_count, dev->cylinders,
2722 dev->heads, dev->sectors);
2723}
2724
2725static void ata_dev_config_fua(struct ata_device *dev)
2726{
2727 /* Ignore FUA support if its use is disabled globally */
2728 if (!libata_fua)
2729 goto nofua;
2730
2731 /* Ignore devices without support for WRITE DMA FUA EXT */
2732 if (!(dev->flags & ATA_DFLAG_LBA48) || !ata_id_has_fua(dev->id))
2733 goto nofua;
2734
2735 /* Ignore known bad devices and devices that lack NCQ support */
2736 if (!ata_ncq_supported(dev) || (dev->horkage & ATA_HORKAGE_NO_FUA))
2737 goto nofua;
2738
2739 dev->flags |= ATA_DFLAG_FUA;
2740
2741 return;
2742
2743nofua:
2744 dev->flags &= ~ATA_DFLAG_FUA;
2745}
2746
2747static void ata_dev_config_devslp(struct ata_device *dev)
2748{
2749 u8 *sata_setting = dev->link->ap->sector_buf;
2750 unsigned int err_mask;
2751 int i, j;
2752
2753 /*
2754 * Check device sleep capability. Get DevSlp timing variables
2755 * from SATA Settings page of Identify Device Data Log.
2756 */
2757 if (!ata_id_has_devslp(dev->id) ||
2758 !ata_identify_page_supported(dev, ATA_LOG_SATA_SETTINGS))
2759 return;
2760
2761 err_mask = ata_read_log_page(dev,
2762 ATA_LOG_IDENTIFY_DEVICE,
2763 ATA_LOG_SATA_SETTINGS,
2764 sata_setting, 1);
2765 if (err_mask)
2766 return;
2767
2768 dev->flags |= ATA_DFLAG_DEVSLP;
2769 for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) {
2770 j = ATA_LOG_DEVSLP_OFFSET + i;
2771 dev->devslp_timing[i] = sata_setting[j];
2772 }
2773}
2774
2775static void ata_dev_config_cpr(struct ata_device *dev)
2776{
2777 unsigned int err_mask;
2778 size_t buf_len;
2779 int i, nr_cpr = 0;
2780 struct ata_cpr_log *cpr_log = NULL;
2781 u8 *desc, *buf = NULL;
2782
2783 if (ata_id_major_version(dev->id) < 11)
2784 goto out;
2785
2786 buf_len = ata_log_supported(dev, ATA_LOG_CONCURRENT_POSITIONING_RANGES);
2787 if (buf_len == 0)
2788 goto out;
2789
2790 /*
2791 * Read the concurrent positioning ranges log (0x47). We can have at
2792 * most 255 32B range descriptors plus a 64B header. This log varies in
2793 * size, so use the size reported in the GPL directory. Reading beyond
2794 * the supported length will result in an error.
2795 */
2796 buf_len <<= 9;
2797 buf = kzalloc(buf_len, GFP_KERNEL);
2798 if (!buf)
2799 goto out;
2800
2801 err_mask = ata_read_log_page(dev, ATA_LOG_CONCURRENT_POSITIONING_RANGES,
2802 0, buf, buf_len >> 9);
2803 if (err_mask)
2804 goto out;
2805
2806 nr_cpr = buf[0];
2807 if (!nr_cpr)
2808 goto out;
2809
2810 cpr_log = kzalloc(struct_size(cpr_log, cpr, nr_cpr), GFP_KERNEL);
2811 if (!cpr_log)
2812 goto out;
2813
2814 cpr_log->nr_cpr = nr_cpr;
2815 desc = &buf[64];
2816 for (i = 0; i < nr_cpr; i++, desc += 32) {
2817 cpr_log->cpr[i].num = desc[0];
2818 cpr_log->cpr[i].num_storage_elements = desc[1];
2819 cpr_log->cpr[i].start_lba = get_unaligned_le64(&desc[8]);
2820 cpr_log->cpr[i].num_lbas = get_unaligned_le64(&desc[16]);
2821 }
2822
2823out:
2824 swap(dev->cpr_log, cpr_log);
2825 kfree(cpr_log);
2826 kfree(buf);
2827}
2828
2829static void ata_dev_print_features(struct ata_device *dev)
2830{
2831 if (!(dev->flags & ATA_DFLAG_FEATURES_MASK))
2832 return;
2833
2834 ata_dev_info(dev,
2835 "Features:%s%s%s%s%s%s%s%s\n",
2836 dev->flags & ATA_DFLAG_FUA ? " FUA" : "",
2837 dev->flags & ATA_DFLAG_TRUSTED ? " Trust" : "",
2838 dev->flags & ATA_DFLAG_DA ? " Dev-Attention" : "",
2839 dev->flags & ATA_DFLAG_DEVSLP ? " Dev-Sleep" : "",
2840 dev->flags & ATA_DFLAG_NCQ_SEND_RECV ? " NCQ-sndrcv" : "",
2841 dev->flags & ATA_DFLAG_NCQ_PRIO ? " NCQ-prio" : "",
2842 dev->flags & ATA_DFLAG_CDL ? " CDL" : "",
2843 dev->cpr_log ? " CPR" : "");
2844}
2845
2846/**
2847 * ata_dev_configure - Configure the specified ATA/ATAPI device
2848 * @dev: Target device to configure
2849 *
2850 * Configure @dev according to @dev->id. Generic and low-level
2851 * driver specific fixups are also applied.
2852 *
2853 * LOCKING:
2854 * Kernel thread context (may sleep)
2855 *
2856 * RETURNS:
2857 * 0 on success, -errno otherwise
2858 */
2859int ata_dev_configure(struct ata_device *dev)
2860{
2861 struct ata_port *ap = dev->link->ap;
2862 bool print_info = ata_dev_print_info(dev);
2863 const u16 *id = dev->id;
2864 unsigned int xfer_mask;
2865 unsigned int err_mask;
2866 char revbuf[7]; /* XYZ-99\0 */
2867 char fwrevbuf[ATA_ID_FW_REV_LEN+1];
2868 char modelbuf[ATA_ID_PROD_LEN+1];
2869 int rc;
2870
2871 if (!ata_dev_enabled(dev)) {
2872 ata_dev_dbg(dev, "no device\n");
2873 return 0;
2874 }
2875
2876 /* set horkage */
2877 dev->horkage |= ata_dev_blacklisted(dev);
2878 ata_force_horkage(dev);
2879
2880 if (dev->horkage & ATA_HORKAGE_DISABLE) {
2881 ata_dev_info(dev, "unsupported device, disabling\n");
2882 ata_dev_disable(dev);
2883 return 0;
2884 }
2885
2886 if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) &&
2887 dev->class == ATA_DEV_ATAPI) {
2888 ata_dev_warn(dev, "WARNING: ATAPI is %s, device ignored\n",
2889 atapi_enabled ? "not supported with this driver"
2890 : "disabled");
2891 ata_dev_disable(dev);
2892 return 0;
2893 }
2894
2895 rc = ata_do_link_spd_horkage(dev);
2896 if (rc)
2897 return rc;
2898
2899 /* some WD SATA-1 drives have issues with LPM, turn on NOLPM for them */
2900 if ((dev->horkage & ATA_HORKAGE_WD_BROKEN_LPM) &&
2901 (id[ATA_ID_SATA_CAPABILITY] & 0xe) == 0x2)
2902 dev->horkage |= ATA_HORKAGE_NOLPM;
2903
2904 if (ap->flags & ATA_FLAG_NO_LPM)
2905 dev->horkage |= ATA_HORKAGE_NOLPM;
2906
2907 if (dev->horkage & ATA_HORKAGE_NOLPM) {
2908 ata_dev_warn(dev, "LPM support broken, forcing max_power\n");
2909 dev->link->ap->target_lpm_policy = ATA_LPM_MAX_POWER;
2910 }
2911
2912 /* let ACPI work its magic */
2913 rc = ata_acpi_on_devcfg(dev);
2914 if (rc)
2915 return rc;
2916
2917 /* massage HPA, do it early as it might change IDENTIFY data */
2918 rc = ata_hpa_resize(dev);
2919 if (rc)
2920 return rc;
2921
2922 /* print device capabilities */
2923 ata_dev_dbg(dev,
2924 "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x "
2925 "85:%04x 86:%04x 87:%04x 88:%04x\n",
2926 __func__,
2927 id[49], id[82], id[83], id[84],
2928 id[85], id[86], id[87], id[88]);
2929
2930 /* initialize to-be-configured parameters */
2931 dev->flags &= ~ATA_DFLAG_CFG_MASK;
2932 dev->max_sectors = 0;
2933 dev->cdb_len = 0;
2934 dev->n_sectors = 0;
2935 dev->cylinders = 0;
2936 dev->heads = 0;
2937 dev->sectors = 0;
2938 dev->multi_count = 0;
2939
2940 /*
2941 * common ATA, ATAPI feature tests
2942 */
2943
2944 /* find max transfer mode; for printk only */
2945 xfer_mask = ata_id_xfermask(id);
2946
2947 ata_dump_id(dev, id);
2948
2949 /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
2950 ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,
2951 sizeof(fwrevbuf));
2952
2953 ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD,
2954 sizeof(modelbuf));
2955
2956 /* ATA-specific feature tests */
2957 if (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ZAC) {
2958 if (ata_id_is_cfa(id)) {
2959 /* CPRM may make this media unusable */
2960 if (id[ATA_ID_CFA_KEY_MGMT] & 1)
2961 ata_dev_warn(dev,
2962 "supports DRM functions and may not be fully accessible\n");
2963 snprintf(revbuf, 7, "CFA");
2964 } else {
2965 snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id));
2966 /* Warn the user if the device has TPM extensions */
2967 if (ata_id_has_tpm(id))
2968 ata_dev_warn(dev,
2969 "supports DRM functions and may not be fully accessible\n");
2970 }
2971
2972 dev->n_sectors = ata_id_n_sectors(id);
2973
2974 /* get current R/W Multiple count setting */
2975 if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) {
2976 unsigned int max = dev->id[47] & 0xff;
2977 unsigned int cnt = dev->id[59] & 0xff;
2978 /* only recognize/allow powers of two here */
2979 if (is_power_of_2(max) && is_power_of_2(cnt))
2980 if (cnt <= max)
2981 dev->multi_count = cnt;
2982 }
2983
2984 /* print device info to dmesg */
2985 if (print_info)
2986 ata_dev_info(dev, "%s: %s, %s, max %s\n",
2987 revbuf, modelbuf, fwrevbuf,
2988 ata_mode_string(xfer_mask));
2989
2990 if (ata_id_has_lba(id)) {
2991 rc = ata_dev_config_lba(dev);
2992 if (rc)
2993 return rc;
2994 } else {
2995 ata_dev_config_chs(dev);
2996 }
2997
2998 ata_dev_config_fua(dev);
2999 ata_dev_config_devslp(dev);
3000 ata_dev_config_sense_reporting(dev);
3001 ata_dev_config_zac(dev);
3002 ata_dev_config_trusted(dev);
3003 ata_dev_config_cpr(dev);
3004 ata_dev_config_cdl(dev);
3005 dev->cdb_len = 32;
3006
3007 if (print_info)
3008 ata_dev_print_features(dev);
3009 }
3010
3011 /* ATAPI-specific feature tests */
3012 else if (dev->class == ATA_DEV_ATAPI) {
3013 const char *cdb_intr_string = "";
3014 const char *atapi_an_string = "";
3015 const char *dma_dir_string = "";
3016 u32 sntf;
3017
3018 rc = atapi_cdb_len(id);
3019 if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
3020 ata_dev_warn(dev, "unsupported CDB len %d\n", rc);
3021 rc = -EINVAL;
3022 goto err_out_nosup;
3023 }
3024 dev->cdb_len = (unsigned int) rc;
3025
3026 /* Enable ATAPI AN if both the host and device have
3027 * the support. If PMP is attached, SNTF is required
3028 * to enable ATAPI AN to discern between PHY status
3029 * changed notifications and ATAPI ANs.
3030 */
3031 if (atapi_an &&
3032 (ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
3033 (!sata_pmp_attached(ap) ||
3034 sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
3035 /* issue SET feature command to turn this on */
3036 err_mask = ata_dev_set_feature(dev,
3037 SETFEATURES_SATA_ENABLE, SATA_AN);
3038 if (err_mask)
3039 ata_dev_err(dev,
3040 "failed to enable ATAPI AN (err_mask=0x%x)\n",
3041 err_mask);
3042 else {
3043 dev->flags |= ATA_DFLAG_AN;
3044 atapi_an_string = ", ATAPI AN";
3045 }
3046 }
3047
3048 if (ata_id_cdb_intr(dev->id)) {
3049 dev->flags |= ATA_DFLAG_CDB_INTR;
3050 cdb_intr_string = ", CDB intr";
3051 }
3052
3053 if (atapi_dmadir || (dev->horkage & ATA_HORKAGE_ATAPI_DMADIR) || atapi_id_dmadir(dev->id)) {
3054 dev->flags |= ATA_DFLAG_DMADIR;
3055 dma_dir_string = ", DMADIR";
3056 }
3057
3058 if (ata_id_has_da(dev->id)) {
3059 dev->flags |= ATA_DFLAG_DA;
3060 zpodd_init(dev);
3061 }
3062
3063 /* print device info to dmesg */
3064 if (print_info)
3065 ata_dev_info(dev,
3066 "ATAPI: %s, %s, max %s%s%s%s\n",
3067 modelbuf, fwrevbuf,
3068 ata_mode_string(xfer_mask),
3069 cdb_intr_string, atapi_an_string,
3070 dma_dir_string);
3071 }
3072
3073 /* determine max_sectors */
3074 dev->max_sectors = ATA_MAX_SECTORS;
3075 if (dev->flags & ATA_DFLAG_LBA48)
3076 dev->max_sectors = ATA_MAX_SECTORS_LBA48;
3077
3078 /* Limit PATA drive on SATA cable bridge transfers to udma5,
3079 200 sectors */
3080 if (ata_dev_knobble(dev)) {
3081 if (print_info)
3082 ata_dev_info(dev, "applying bridge limits\n");
3083 dev->udma_mask &= ATA_UDMA5;
3084 dev->max_sectors = ATA_MAX_SECTORS;
3085 }
3086
3087 if ((dev->class == ATA_DEV_ATAPI) &&
3088 (atapi_command_packet_set(id) == TYPE_TAPE)) {
3089 dev->max_sectors = ATA_MAX_SECTORS_TAPE;
3090 dev->horkage |= ATA_HORKAGE_STUCK_ERR;
3091 }
3092
3093 if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
3094 dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
3095 dev->max_sectors);
3096
3097 if (dev->horkage & ATA_HORKAGE_MAX_SEC_1024)
3098 dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_1024,
3099 dev->max_sectors);
3100
3101 if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48)
3102 dev->max_sectors = ATA_MAX_SECTORS_LBA48;
3103
3104 if (ap->ops->dev_config)
3105 ap->ops->dev_config(dev);
3106
3107 if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
3108 /* Let the user know. We don't want to disallow opens for
3109 rescue purposes, or in case the vendor is just a blithering
3110 idiot. Do this after the dev_config call as some controllers
3111 with buggy firmware may want to avoid reporting false device
3112 bugs */
3113
3114 if (print_info) {
3115 ata_dev_warn(dev,
3116"Drive reports diagnostics failure. This may indicate a drive\n");
3117 ata_dev_warn(dev,
3118"fault or invalid emulation. Contact drive vendor for information.\n");
3119 }
3120 }
3121
3122 if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
3123 ata_dev_warn(dev, "WARNING: device requires firmware update to be fully functional\n");
3124 ata_dev_warn(dev, " contact the vendor or visit http://ata.wiki.kernel.org\n");
3125 }
3126
3127 return 0;
3128
3129err_out_nosup:
3130 return rc;
3131}
3132
3133/**
3134 * ata_cable_40wire - return 40 wire cable type
3135 * @ap: port
3136 *
3137 * Helper method for drivers which want to hardwire 40 wire cable
3138 * detection.
3139 */
3140
3141int ata_cable_40wire(struct ata_port *ap)
3142{
3143 return ATA_CBL_PATA40;
3144}
3145EXPORT_SYMBOL_GPL(ata_cable_40wire);
3146
3147/**
3148 * ata_cable_80wire - return 80 wire cable type
3149 * @ap: port
3150 *
3151 * Helper method for drivers which want to hardwire 80 wire cable
3152 * detection.
3153 */
3154
3155int ata_cable_80wire(struct ata_port *ap)
3156{
3157 return ATA_CBL_PATA80;
3158}
3159EXPORT_SYMBOL_GPL(ata_cable_80wire);
3160
3161/**
3162 * ata_cable_unknown - return unknown PATA cable.
3163 * @ap: port
3164 *
3165 * Helper method for drivers which have no PATA cable detection.
3166 */
3167
3168int ata_cable_unknown(struct ata_port *ap)
3169{
3170 return ATA_CBL_PATA_UNK;
3171}
3172EXPORT_SYMBOL_GPL(ata_cable_unknown);
3173
3174/**
3175 * ata_cable_ignore - return ignored PATA cable.
3176 * @ap: port
3177 *
3178 * Helper method for drivers which don't use cable type to limit
3179 * transfer mode.
3180 */
3181int ata_cable_ignore(struct ata_port *ap)
3182{
3183 return ATA_CBL_PATA_IGN;
3184}
3185EXPORT_SYMBOL_GPL(ata_cable_ignore);
3186
3187/**
3188 * ata_cable_sata - return SATA cable type
3189 * @ap: port
3190 *
3191 * Helper method for drivers which have SATA cables
3192 */
3193
3194int ata_cable_sata(struct ata_port *ap)
3195{
3196 return ATA_CBL_SATA;
3197}
3198EXPORT_SYMBOL_GPL(ata_cable_sata);
3199
3200/**
3201 * sata_print_link_status - Print SATA link status
3202 * @link: SATA link to printk link status about
3203 *
3204 * This function prints link speed and status of a SATA link.
3205 *
3206 * LOCKING:
3207 * None.
3208 */
3209static void sata_print_link_status(struct ata_link *link)
3210{
3211 u32 sstatus, scontrol, tmp;
3212
3213 if (sata_scr_read(link, SCR_STATUS, &sstatus))
3214 return;
3215 if (sata_scr_read(link, SCR_CONTROL, &scontrol))
3216 return;
3217
3218 if (ata_phys_link_online(link)) {
3219 tmp = (sstatus >> 4) & 0xf;
3220 ata_link_info(link, "SATA link up %s (SStatus %X SControl %X)\n",
3221 sata_spd_string(tmp), sstatus, scontrol);
3222 } else {
3223 ata_link_info(link, "SATA link down (SStatus %X SControl %X)\n",
3224 sstatus, scontrol);
3225 }
3226}
3227
3228/**
3229 * ata_dev_pair - return other device on cable
3230 * @adev: device
3231 *
3232 * Obtain the other device on the same cable, or if none is
3233 * present NULL is returned
3234 */
3235
3236struct ata_device *ata_dev_pair(struct ata_device *adev)
3237{
3238 struct ata_link *link = adev->link;
3239 struct ata_device *pair = &link->device[1 - adev->devno];
3240 if (!ata_dev_enabled(pair))
3241 return NULL;
3242 return pair;
3243}
3244EXPORT_SYMBOL_GPL(ata_dev_pair);
3245
3246/**
3247 * sata_down_spd_limit - adjust SATA spd limit downward
3248 * @link: Link to adjust SATA spd limit for
3249 * @spd_limit: Additional limit
3250 *
3251 * Adjust SATA spd limit of @link downward. Note that this
3252 * function only adjusts the limit. The change must be applied
3253 * using sata_set_spd().
3254 *
3255 * If @spd_limit is non-zero, the speed is limited to equal to or
3256 * lower than @spd_limit if such speed is supported. If
3257 * @spd_limit is slower than any supported speed, only the lowest
3258 * supported speed is allowed.
3259 *
3260 * LOCKING:
3261 * Inherited from caller.
3262 *
3263 * RETURNS:
3264 * 0 on success, negative errno on failure
3265 */
3266int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
3267{
3268 u32 sstatus, spd, mask;
3269 int rc, bit;
3270
3271 if (!sata_scr_valid(link))
3272 return -EOPNOTSUPP;
3273
3274 /* If SCR can be read, use it to determine the current SPD.
3275 * If not, use cached value in link->sata_spd.
3276 */
3277 rc = sata_scr_read(link, SCR_STATUS, &sstatus);
3278 if (rc == 0 && ata_sstatus_online(sstatus))
3279 spd = (sstatus >> 4) & 0xf;
3280 else
3281 spd = link->sata_spd;
3282
3283 mask = link->sata_spd_limit;
3284 if (mask <= 1)
3285 return -EINVAL;
3286
3287 /* unconditionally mask off the highest bit */
3288 bit = fls(mask) - 1;
3289 mask &= ~(1 << bit);
3290
3291 /*
3292 * Mask off all speeds higher than or equal to the current one. At
3293 * this point, if current SPD is not available and we previously
3294 * recorded the link speed from SStatus, the driver has already
3295 * masked off the highest bit so mask should already be 1 or 0.
3296 * Otherwise, we should not force 1.5Gbps on a link where we have
3297 * not previously recorded speed from SStatus. Just return in this
3298 * case.
3299 */
3300 if (spd > 1)
3301 mask &= (1 << (spd - 1)) - 1;
3302 else if (link->sata_spd)
3303 return -EINVAL;
3304
3305 /* were we already at the bottom? */
3306 if (!mask)
3307 return -EINVAL;
3308
3309 if (spd_limit) {
3310 if (mask & ((1 << spd_limit) - 1))
3311 mask &= (1 << spd_limit) - 1;
3312 else {
3313 bit = ffs(mask) - 1;
3314 mask = 1 << bit;
3315 }
3316 }
3317
3318 link->sata_spd_limit = mask;
3319
3320 ata_link_warn(link, "limiting SATA link speed to %s\n",
3321 sata_spd_string(fls(mask)));
3322
3323 return 0;
3324}
3325
3326#ifdef CONFIG_ATA_ACPI
3327/**
3328 * ata_timing_cycle2mode - find xfer mode for the specified cycle duration
3329 * @xfer_shift: ATA_SHIFT_* value for transfer type to examine.
3330 * @cycle: cycle duration in ns
3331 *
3332 * Return matching xfer mode for @cycle. The returned mode is of
3333 * the transfer type specified by @xfer_shift. If @cycle is too
3334 * slow for @xfer_shift, 0xff is returned. If @cycle is faster
3335 * than the fastest known mode, the fasted mode is returned.
3336 *
3337 * LOCKING:
3338 * None.
3339 *
3340 * RETURNS:
3341 * Matching xfer_mode, 0xff if no match found.
3342 */
3343u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle)
3344{
3345 u8 base_mode = 0xff, last_mode = 0xff;
3346 const struct ata_xfer_ent *ent;
3347 const struct ata_timing *t;
3348
3349 for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
3350 if (ent->shift == xfer_shift)
3351 base_mode = ent->base;
3352
3353 for (t = ata_timing_find_mode(base_mode);
3354 t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) {
3355 unsigned short this_cycle;
3356
3357 switch (xfer_shift) {
3358 case ATA_SHIFT_PIO:
3359 case ATA_SHIFT_MWDMA:
3360 this_cycle = t->cycle;
3361 break;
3362 case ATA_SHIFT_UDMA:
3363 this_cycle = t->udma;
3364 break;
3365 default:
3366 return 0xff;
3367 }
3368
3369 if (cycle > this_cycle)
3370 break;
3371
3372 last_mode = t->mode;
3373 }
3374
3375 return last_mode;
3376}
3377#endif
3378
3379/**
3380 * ata_down_xfermask_limit - adjust dev xfer masks downward
3381 * @dev: Device to adjust xfer masks
3382 * @sel: ATA_DNXFER_* selector
3383 *
3384 * Adjust xfer masks of @dev downward. Note that this function
3385 * does not apply the change. Invoking ata_set_mode() afterwards
3386 * will apply the limit.
3387 *
3388 * LOCKING:
3389 * Inherited from caller.
3390 *
3391 * RETURNS:
3392 * 0 on success, negative errno on failure
3393 */
3394int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
3395{
3396 char buf[32];
3397 unsigned int orig_mask, xfer_mask;
3398 unsigned int pio_mask, mwdma_mask, udma_mask;
3399 int quiet, highbit;
3400
3401 quiet = !!(sel & ATA_DNXFER_QUIET);
3402 sel &= ~ATA_DNXFER_QUIET;
3403
3404 xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask,
3405 dev->mwdma_mask,
3406 dev->udma_mask);
3407 ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask);
3408
3409 switch (sel) {
3410 case ATA_DNXFER_PIO:
3411 highbit = fls(pio_mask) - 1;
3412 pio_mask &= ~(1 << highbit);
3413 break;
3414
3415 case ATA_DNXFER_DMA:
3416 if (udma_mask) {
3417 highbit = fls(udma_mask) - 1;
3418 udma_mask &= ~(1 << highbit);
3419 if (!udma_mask)
3420 return -ENOENT;
3421 } else if (mwdma_mask) {
3422 highbit = fls(mwdma_mask) - 1;
3423 mwdma_mask &= ~(1 << highbit);
3424 if (!mwdma_mask)
3425 return -ENOENT;
3426 }
3427 break;
3428
3429 case ATA_DNXFER_40C:
3430 udma_mask &= ATA_UDMA_MASK_40C;
3431 break;
3432
3433 case ATA_DNXFER_FORCE_PIO0:
3434 pio_mask &= 1;
3435 fallthrough;
3436 case ATA_DNXFER_FORCE_PIO:
3437 mwdma_mask = 0;
3438 udma_mask = 0;
3439 break;
3440
3441 default:
3442 BUG();
3443 }
3444
3445 xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
3446
3447 if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask)
3448 return -ENOENT;
3449
3450 if (!quiet) {
3451 if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
3452 snprintf(buf, sizeof(buf), "%s:%s",
3453 ata_mode_string(xfer_mask),
3454 ata_mode_string(xfer_mask & ATA_MASK_PIO));
3455 else
3456 snprintf(buf, sizeof(buf), "%s",
3457 ata_mode_string(xfer_mask));
3458
3459 ata_dev_warn(dev, "limiting speed to %s\n", buf);
3460 }
3461
3462 ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
3463 &dev->udma_mask);
3464
3465 return 0;
3466}
3467
3468static int ata_dev_set_mode(struct ata_device *dev)
3469{
3470 struct ata_port *ap = dev->link->ap;
3471 struct ata_eh_context *ehc = &dev->link->eh_context;
3472 const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER;
3473 const char *dev_err_whine = "";
3474 int ign_dev_err = 0;
3475 unsigned int err_mask = 0;
3476 int rc;
3477
3478 dev->flags &= ~ATA_DFLAG_PIO;
3479 if (dev->xfer_shift == ATA_SHIFT_PIO)
3480 dev->flags |= ATA_DFLAG_PIO;
3481
3482 if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id))
3483 dev_err_whine = " (SET_XFERMODE skipped)";
3484 else {
3485 if (nosetxfer)
3486 ata_dev_warn(dev,
3487 "NOSETXFER but PATA detected - can't "
3488 "skip SETXFER, might malfunction\n");
3489 err_mask = ata_dev_set_xfermode(dev);
3490 }
3491
3492 if (err_mask & ~AC_ERR_DEV)
3493 goto fail;
3494
3495 /* revalidate */
3496 ehc->i.flags |= ATA_EHI_POST_SETMODE;
3497 rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0);
3498 ehc->i.flags &= ~ATA_EHI_POST_SETMODE;
3499 if (rc)
3500 return rc;
3501
3502 if (dev->xfer_shift == ATA_SHIFT_PIO) {
3503 /* Old CFA may refuse this command, which is just fine */
3504 if (ata_id_is_cfa(dev->id))
3505 ign_dev_err = 1;
3506 /* Catch several broken garbage emulations plus some pre
3507 ATA devices */
3508 if (ata_id_major_version(dev->id) == 0 &&
3509 dev->pio_mode <= XFER_PIO_2)
3510 ign_dev_err = 1;
3511 /* Some very old devices and some bad newer ones fail
3512 any kind of SET_XFERMODE request but support PIO0-2
3513 timings and no IORDY */
3514 if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2)
3515 ign_dev_err = 1;
3516 }
3517 /* Early MWDMA devices do DMA but don't allow DMA mode setting.
3518 Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */
3519 if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
3520 dev->dma_mode == XFER_MW_DMA_0 &&
3521 (dev->id[63] >> 8) & 1)
3522 ign_dev_err = 1;
3523
3524 /* if the device is actually configured correctly, ignore dev err */
3525 if (dev->xfer_mode == ata_xfer_mask2mode(ata_id_xfermask(dev->id)))
3526 ign_dev_err = 1;
3527
3528 if (err_mask & AC_ERR_DEV) {
3529 if (!ign_dev_err)
3530 goto fail;
3531 else
3532 dev_err_whine = " (device error ignored)";
3533 }
3534
3535 ata_dev_dbg(dev, "xfer_shift=%u, xfer_mode=0x%x\n",
3536 dev->xfer_shift, (int)dev->xfer_mode);
3537
3538 if (!(ehc->i.flags & ATA_EHI_QUIET) ||
3539 ehc->i.flags & ATA_EHI_DID_HARDRESET)
3540 ata_dev_info(dev, "configured for %s%s\n",
3541 ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)),
3542 dev_err_whine);
3543
3544 return 0;
3545
3546 fail:
3547 ata_dev_err(dev, "failed to set xfermode (err_mask=0x%x)\n", err_mask);
3548 return -EIO;
3549}
3550
3551/**
3552 * ata_do_set_mode - Program timings and issue SET FEATURES - XFER
3553 * @link: link on which timings will be programmed
3554 * @r_failed_dev: out parameter for failed device
3555 *
3556 * Standard implementation of the function used to tune and set
3557 * ATA device disk transfer mode (PIO3, UDMA6, etc.). If
3558 * ata_dev_set_mode() fails, pointer to the failing device is
3559 * returned in @r_failed_dev.
3560 *
3561 * LOCKING:
3562 * PCI/etc. bus probe sem.
3563 *
3564 * RETURNS:
3565 * 0 on success, negative errno otherwise
3566 */
3567
3568int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
3569{
3570 struct ata_port *ap = link->ap;
3571 struct ata_device *dev;
3572 int rc = 0, used_dma = 0, found = 0;
3573
3574 /* step 1: calculate xfer_mask */
3575 ata_for_each_dev(dev, link, ENABLED) {
3576 unsigned int pio_mask, dma_mask;
3577 unsigned int mode_mask;
3578
3579 mode_mask = ATA_DMA_MASK_ATA;
3580 if (dev->class == ATA_DEV_ATAPI)
3581 mode_mask = ATA_DMA_MASK_ATAPI;
3582 else if (ata_id_is_cfa(dev->id))
3583 mode_mask = ATA_DMA_MASK_CFA;
3584
3585 ata_dev_xfermask(dev);
3586 ata_force_xfermask(dev);
3587
3588 pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0);
3589
3590 if (libata_dma_mask & mode_mask)
3591 dma_mask = ata_pack_xfermask(0, dev->mwdma_mask,
3592 dev->udma_mask);
3593 else
3594 dma_mask = 0;
3595
3596 dev->pio_mode = ata_xfer_mask2mode(pio_mask);
3597 dev->dma_mode = ata_xfer_mask2mode(dma_mask);
3598
3599 found = 1;
3600 if (ata_dma_enabled(dev))
3601 used_dma = 1;
3602 }
3603 if (!found)
3604 goto out;
3605
3606 /* step 2: always set host PIO timings */
3607 ata_for_each_dev(dev, link, ENABLED) {
3608 if (dev->pio_mode == 0xff) {
3609 ata_dev_warn(dev, "no PIO support\n");
3610 rc = -EINVAL;
3611 goto out;
3612 }
3613
3614 dev->xfer_mode = dev->pio_mode;
3615 dev->xfer_shift = ATA_SHIFT_PIO;
3616 if (ap->ops->set_piomode)
3617 ap->ops->set_piomode(ap, dev);
3618 }
3619
3620 /* step 3: set host DMA timings */
3621 ata_for_each_dev(dev, link, ENABLED) {
3622 if (!ata_dma_enabled(dev))
3623 continue;
3624
3625 dev->xfer_mode = dev->dma_mode;
3626 dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode);
3627 if (ap->ops->set_dmamode)
3628 ap->ops->set_dmamode(ap, dev);
3629 }
3630
3631 /* step 4: update devices' xfer mode */
3632 ata_for_each_dev(dev, link, ENABLED) {
3633 rc = ata_dev_set_mode(dev);
3634 if (rc)
3635 goto out;
3636 }
3637
3638 /* Record simplex status. If we selected DMA then the other
3639 * host channels are not permitted to do so.
3640 */
3641 if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX))
3642 ap->host->simplex_claimed = ap;
3643
3644 out:
3645 if (rc)
3646 *r_failed_dev = dev;
3647 return rc;
3648}
3649EXPORT_SYMBOL_GPL(ata_do_set_mode);
3650
3651/**
3652 * ata_wait_ready - wait for link to become ready
3653 * @link: link to be waited on
3654 * @deadline: deadline jiffies for the operation
3655 * @check_ready: callback to check link readiness
3656 *
3657 * Wait for @link to become ready. @check_ready should return
3658 * positive number if @link is ready, 0 if it isn't, -ENODEV if
3659 * link doesn't seem to be occupied, other errno for other error
3660 * conditions.
3661 *
3662 * Transient -ENODEV conditions are allowed for
3663 * ATA_TMOUT_FF_WAIT.
3664 *
3665 * LOCKING:
3666 * EH context.
3667 *
3668 * RETURNS:
3669 * 0 if @link is ready before @deadline; otherwise, -errno.
3670 */
3671int ata_wait_ready(struct ata_link *link, unsigned long deadline,
3672 int (*check_ready)(struct ata_link *link))
3673{
3674 unsigned long start = jiffies;
3675 unsigned long nodev_deadline;
3676 int warned = 0;
3677
3678 /* choose which 0xff timeout to use, read comment in libata.h */
3679 if (link->ap->host->flags & ATA_HOST_PARALLEL_SCAN)
3680 nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT_LONG);
3681 else
3682 nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
3683
3684 /* Slave readiness can't be tested separately from master. On
3685 * M/S emulation configuration, this function should be called
3686 * only on the master and it will handle both master and slave.
3687 */
3688 WARN_ON(link == link->ap->slave_link);
3689
3690 if (time_after(nodev_deadline, deadline))
3691 nodev_deadline = deadline;
3692
3693 while (1) {
3694 unsigned long now = jiffies;
3695 int ready, tmp;
3696
3697 ready = tmp = check_ready(link);
3698 if (ready > 0)
3699 return 0;
3700
3701 /*
3702 * -ENODEV could be transient. Ignore -ENODEV if link
3703 * is online. Also, some SATA devices take a long
3704 * time to clear 0xff after reset. Wait for
3705 * ATA_TMOUT_FF_WAIT[_LONG] on -ENODEV if link isn't
3706 * offline.
3707 *
3708 * Note that some PATA controllers (pata_ali) explode
3709 * if status register is read more than once when
3710 * there's no device attached.
3711 */
3712 if (ready == -ENODEV) {
3713 if (ata_link_online(link))
3714 ready = 0;
3715 else if ((link->ap->flags & ATA_FLAG_SATA) &&
3716 !ata_link_offline(link) &&
3717 time_before(now, nodev_deadline))
3718 ready = 0;
3719 }
3720
3721 if (ready)
3722 return ready;
3723 if (time_after(now, deadline))
3724 return -EBUSY;
3725
3726 if (!warned && time_after(now, start + 5 * HZ) &&
3727 (deadline - now > 3 * HZ)) {
3728 ata_link_warn(link,
3729 "link is slow to respond, please be patient "
3730 "(ready=%d)\n", tmp);
3731 warned = 1;
3732 }
3733
3734 ata_msleep(link->ap, 50);
3735 }
3736}
3737
3738/**
3739 * ata_wait_after_reset - wait for link to become ready after reset
3740 * @link: link to be waited on
3741 * @deadline: deadline jiffies for the operation
3742 * @check_ready: callback to check link readiness
3743 *
3744 * Wait for @link to become ready after reset.
3745 *
3746 * LOCKING:
3747 * EH context.
3748 *
3749 * RETURNS:
3750 * 0 if @link is ready before @deadline; otherwise, -errno.
3751 */
3752int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
3753 int (*check_ready)(struct ata_link *link))
3754{
3755 ata_msleep(link->ap, ATA_WAIT_AFTER_RESET);
3756
3757 return ata_wait_ready(link, deadline, check_ready);
3758}
3759EXPORT_SYMBOL_GPL(ata_wait_after_reset);
3760
3761/**
3762 * ata_std_prereset - prepare for reset
3763 * @link: ATA link to be reset
3764 * @deadline: deadline jiffies for the operation
3765 *
3766 * @link is about to be reset. Initialize it. Failure from
3767 * prereset makes libata abort whole reset sequence and give up
3768 * that port, so prereset should be best-effort. It does its
3769 * best to prepare for reset sequence but if things go wrong, it
3770 * should just whine, not fail.
3771 *
3772 * LOCKING:
3773 * Kernel thread context (may sleep)
3774 *
3775 * RETURNS:
3776 * Always 0.
3777 */
3778int ata_std_prereset(struct ata_link *link, unsigned long deadline)
3779{
3780 struct ata_port *ap = link->ap;
3781 struct ata_eh_context *ehc = &link->eh_context;
3782 const unsigned int *timing = sata_ehc_deb_timing(ehc);
3783 int rc;
3784
3785 /* if we're about to do hardreset, nothing more to do */
3786 if (ehc->i.action & ATA_EH_HARDRESET)
3787 return 0;
3788
3789 /* if SATA, resume link */
3790 if (ap->flags & ATA_FLAG_SATA) {
3791 rc = sata_link_resume(link, timing, deadline);
3792 /* whine about phy resume failure but proceed */
3793 if (rc && rc != -EOPNOTSUPP)
3794 ata_link_warn(link,
3795 "failed to resume link for reset (errno=%d)\n",
3796 rc);
3797 }
3798
3799 /* no point in trying softreset on offline link */
3800 if (ata_phys_link_offline(link))
3801 ehc->i.action &= ~ATA_EH_SOFTRESET;
3802
3803 return 0;
3804}
3805EXPORT_SYMBOL_GPL(ata_std_prereset);
3806
3807/**
3808 * sata_std_hardreset - COMRESET w/o waiting or classification
3809 * @link: link to reset
3810 * @class: resulting class of attached device
3811 * @deadline: deadline jiffies for the operation
3812 *
3813 * Standard SATA COMRESET w/o waiting or classification.
3814 *
3815 * LOCKING:
3816 * Kernel thread context (may sleep)
3817 *
3818 * RETURNS:
3819 * 0 if link offline, -EAGAIN if link online, -errno on errors.
3820 */
3821int sata_std_hardreset(struct ata_link *link, unsigned int *class,
3822 unsigned long deadline)
3823{
3824 const unsigned int *timing = sata_ehc_deb_timing(&link->eh_context);
3825 bool online;
3826 int rc;
3827
3828 /* do hardreset */
3829 rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
3830 return online ? -EAGAIN : rc;
3831}
3832EXPORT_SYMBOL_GPL(sata_std_hardreset);
3833
3834/**
3835 * ata_std_postreset - standard postreset callback
3836 * @link: the target ata_link
3837 * @classes: classes of attached devices
3838 *
3839 * This function is invoked after a successful reset. Note that
3840 * the device might have been reset more than once using
3841 * different reset methods before postreset is invoked.
3842 *
3843 * LOCKING:
3844 * Kernel thread context (may sleep)
3845 */
3846void ata_std_postreset(struct ata_link *link, unsigned int *classes)
3847{
3848 u32 serror;
3849
3850 /* reset complete, clear SError */
3851 if (!sata_scr_read(link, SCR_ERROR, &serror))
3852 sata_scr_write(link, SCR_ERROR, serror);
3853
3854 /* print link status */
3855 sata_print_link_status(link);
3856}
3857EXPORT_SYMBOL_GPL(ata_std_postreset);
3858
3859/**
3860 * ata_dev_same_device - Determine whether new ID matches configured device
3861 * @dev: device to compare against
3862 * @new_class: class of the new device
3863 * @new_id: IDENTIFY page of the new device
3864 *
3865 * Compare @new_class and @new_id against @dev and determine
3866 * whether @dev is the device indicated by @new_class and
3867 * @new_id.
3868 *
3869 * LOCKING:
3870 * None.
3871 *
3872 * RETURNS:
3873 * 1 if @dev matches @new_class and @new_id, 0 otherwise.
3874 */
3875static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
3876 const u16 *new_id)
3877{
3878 const u16 *old_id = dev->id;
3879 unsigned char model[2][ATA_ID_PROD_LEN + 1];
3880 unsigned char serial[2][ATA_ID_SERNO_LEN + 1];
3881
3882 if (dev->class != new_class) {
3883 ata_dev_info(dev, "class mismatch %d != %d\n",
3884 dev->class, new_class);
3885 return 0;
3886 }
3887
3888 ata_id_c_string(old_id, model[0], ATA_ID_PROD, sizeof(model[0]));
3889 ata_id_c_string(new_id, model[1], ATA_ID_PROD, sizeof(model[1]));
3890 ata_id_c_string(old_id, serial[0], ATA_ID_SERNO, sizeof(serial[0]));
3891 ata_id_c_string(new_id, serial[1], ATA_ID_SERNO, sizeof(serial[1]));
3892
3893 if (strcmp(model[0], model[1])) {
3894 ata_dev_info(dev, "model number mismatch '%s' != '%s'\n",
3895 model[0], model[1]);
3896 return 0;
3897 }
3898
3899 if (strcmp(serial[0], serial[1])) {
3900 ata_dev_info(dev, "serial number mismatch '%s' != '%s'\n",
3901 serial[0], serial[1]);
3902 return 0;
3903 }
3904
3905 return 1;
3906}
3907
3908/**
3909 * ata_dev_reread_id - Re-read IDENTIFY data
3910 * @dev: target ATA device
3911 * @readid_flags: read ID flags
3912 *
3913 * Re-read IDENTIFY page and make sure @dev is still attached to
3914 * the port.
3915 *
3916 * LOCKING:
3917 * Kernel thread context (may sleep)
3918 *
3919 * RETURNS:
3920 * 0 on success, negative errno otherwise
3921 */
3922int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags)
3923{
3924 unsigned int class = dev->class;
3925 u16 *id = (void *)dev->link->ap->sector_buf;
3926 int rc;
3927
3928 /* read ID data */
3929 rc = ata_dev_read_id(dev, &class, readid_flags, id);
3930 if (rc)
3931 return rc;
3932
3933 /* is the device still there? */
3934 if (!ata_dev_same_device(dev, class, id))
3935 return -ENODEV;
3936
3937 memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS);
3938 return 0;
3939}
3940
3941/**
3942 * ata_dev_revalidate - Revalidate ATA device
3943 * @dev: device to revalidate
3944 * @new_class: new class code
3945 * @readid_flags: read ID flags
3946 *
3947 * Re-read IDENTIFY page, make sure @dev is still attached to the
3948 * port and reconfigure it according to the new IDENTIFY page.
3949 *
3950 * LOCKING:
3951 * Kernel thread context (may sleep)
3952 *
3953 * RETURNS:
3954 * 0 on success, negative errno otherwise
3955 */
3956int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
3957 unsigned int readid_flags)
3958{
3959 u64 n_sectors = dev->n_sectors;
3960 u64 n_native_sectors = dev->n_native_sectors;
3961 int rc;
3962
3963 if (!ata_dev_enabled(dev))
3964 return -ENODEV;
3965
3966 /* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
3967 if (ata_class_enabled(new_class) && new_class == ATA_DEV_PMP) {
3968 ata_dev_info(dev, "class mismatch %u != %u\n",
3969 dev->class, new_class);
3970 rc = -ENODEV;
3971 goto fail;
3972 }
3973
3974 /* re-read ID */
3975 rc = ata_dev_reread_id(dev, readid_flags);
3976 if (rc)
3977 goto fail;
3978
3979 /* configure device according to the new ID */
3980 rc = ata_dev_configure(dev);
3981 if (rc)
3982 goto fail;
3983
3984 /* verify n_sectors hasn't changed */
3985 if (dev->class != ATA_DEV_ATA || !n_sectors ||
3986 dev->n_sectors == n_sectors)
3987 return 0;
3988
3989 /* n_sectors has changed */
3990 ata_dev_warn(dev, "n_sectors mismatch %llu != %llu\n",
3991 (unsigned long long)n_sectors,
3992 (unsigned long long)dev->n_sectors);
3993
3994 /*
3995 * Something could have caused HPA to be unlocked
3996 * involuntarily. If n_native_sectors hasn't changed and the
3997 * new size matches it, keep the device.
3998 */
3999 if (dev->n_native_sectors == n_native_sectors &&
4000 dev->n_sectors > n_sectors && dev->n_sectors == n_native_sectors) {
4001 ata_dev_warn(dev,
4002 "new n_sectors matches native, probably "
4003 "late HPA unlock, n_sectors updated\n");
4004 /* use the larger n_sectors */
4005 return 0;
4006 }
4007
4008 /*
4009 * Some BIOSes boot w/o HPA but resume w/ HPA locked. Try
4010 * unlocking HPA in those cases.
4011 *
4012 * https://bugzilla.kernel.org/show_bug.cgi?id=15396
4013 */
4014 if (dev->n_native_sectors == n_native_sectors &&
4015 dev->n_sectors < n_sectors && n_sectors == n_native_sectors &&
4016 !(dev->horkage & ATA_HORKAGE_BROKEN_HPA)) {
4017 ata_dev_warn(dev,
4018 "old n_sectors matches native, probably "
4019 "late HPA lock, will try to unlock HPA\n");
4020 /* try unlocking HPA */
4021 dev->flags |= ATA_DFLAG_UNLOCK_HPA;
4022 rc = -EIO;
4023 } else
4024 rc = -ENODEV;
4025
4026 /* restore original n_[native_]sectors and fail */
4027 dev->n_native_sectors = n_native_sectors;
4028 dev->n_sectors = n_sectors;
4029 fail:
4030 ata_dev_err(dev, "revalidation failed (errno=%d)\n", rc);
4031 return rc;
4032}
4033
4034struct ata_blacklist_entry {
4035 const char *model_num;
4036 const char *model_rev;
4037 unsigned long horkage;
4038};
4039
4040static const struct ata_blacklist_entry ata_device_blacklist [] = {
4041 /* Devices with DMA related problems under Linux */
4042 { "WDC AC11000H", NULL, ATA_HORKAGE_NODMA },
4043 { "WDC AC22100H", NULL, ATA_HORKAGE_NODMA },
4044 { "WDC AC32500H", NULL, ATA_HORKAGE_NODMA },
4045 { "WDC AC33100H", NULL, ATA_HORKAGE_NODMA },
4046 { "WDC AC31600H", NULL, ATA_HORKAGE_NODMA },
4047 { "WDC AC32100H", "24.09P07", ATA_HORKAGE_NODMA },
4048 { "WDC AC23200L", "21.10N21", ATA_HORKAGE_NODMA },
4049 { "Compaq CRD-8241B", NULL, ATA_HORKAGE_NODMA },
4050 { "CRD-8400B", NULL, ATA_HORKAGE_NODMA },
4051 { "CRD-848[02]B", NULL, ATA_HORKAGE_NODMA },
4052 { "CRD-84", NULL, ATA_HORKAGE_NODMA },
4053 { "SanDisk SDP3B", NULL, ATA_HORKAGE_NODMA },
4054 { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA },
4055 { "SANYO CD-ROM CRD", NULL, ATA_HORKAGE_NODMA },
4056 { "HITACHI CDR-8", NULL, ATA_HORKAGE_NODMA },
4057 { "HITACHI CDR-8[34]35",NULL, ATA_HORKAGE_NODMA },
4058 { "Toshiba CD-ROM XM-6202B", NULL, ATA_HORKAGE_NODMA },
4059 { "TOSHIBA CD-ROM XM-1702BC", NULL, ATA_HORKAGE_NODMA },
4060 { "CD-532E-A", NULL, ATA_HORKAGE_NODMA },
4061 { "E-IDE CD-ROM CR-840",NULL, ATA_HORKAGE_NODMA },
4062 { "CD-ROM Drive/F5A", NULL, ATA_HORKAGE_NODMA },
4063 { "WPI CDD-820", NULL, ATA_HORKAGE_NODMA },
4064 { "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA },
4065 { "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA },
4066 { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA },
4067 { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
4068 { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA },
4069 { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
4070 { " 2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA },
4071 { "VRFDFC22048UCHC-TE*", NULL, ATA_HORKAGE_NODMA },
4072 /* Odd clown on sil3726/4726 PMPs */
4073 { "Config Disk", NULL, ATA_HORKAGE_DISABLE },
4074 /* Similar story with ASMedia 1092 */
4075 { "ASMT109x- Config", NULL, ATA_HORKAGE_DISABLE },
4076
4077 /* Weird ATAPI devices */
4078 { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
4079 { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA },
4080 { "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 },
4081 { "Slimtype DVD A DS8A9SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 },
4082
4083 /*
4084 * Causes silent data corruption with higher max sects.
4085 * http://lkml.kernel.org/g/x49wpy40ysk.fsf@segfault.boston.devel.redhat.com
4086 */
4087 { "ST380013AS", "3.20", ATA_HORKAGE_MAX_SEC_1024 },
4088
4089 /*
4090 * These devices time out with higher max sects.
4091 * https://bugzilla.kernel.org/show_bug.cgi?id=121671
4092 */
4093 { "LITEON CX1-JB*-HP", NULL, ATA_HORKAGE_MAX_SEC_1024 },
4094 { "LITEON EP1-*", NULL, ATA_HORKAGE_MAX_SEC_1024 },
4095
4096 /* Devices we expect to fail diagnostics */
4097
4098 /* Devices where NCQ should be avoided */
4099 /* NCQ is slow */
4100 { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
4101 { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ },
4102 /* http://thread.gmane.org/gmane.linux.ide/14907 */
4103 { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
4104 /* NCQ is broken */
4105 { "Maxtor *", "BANC*", ATA_HORKAGE_NONCQ },
4106 { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ },
4107 { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ },
4108 { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
4109 { "OCZ CORE_SSD", "02.10104", ATA_HORKAGE_NONCQ },
4110
4111 /* Seagate NCQ + FLUSH CACHE firmware bug */
4112 { "ST31500341AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
4113 ATA_HORKAGE_FIRMWARE_WARN },
4114
4115 { "ST31000333AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
4116 ATA_HORKAGE_FIRMWARE_WARN },
4117
4118 { "ST3640[36]23AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
4119 ATA_HORKAGE_FIRMWARE_WARN },
4120
4121 { "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
4122 ATA_HORKAGE_FIRMWARE_WARN },
4123
4124 /* drives which fail FPDMA_AA activation (some may freeze afterwards)
4125 the ST disks also have LPM issues */
4126 { "ST1000LM024 HN-M101MBB", NULL, ATA_HORKAGE_BROKEN_FPDMA_AA |
4127 ATA_HORKAGE_NOLPM },
4128 { "VB0250EAVER", "HPG7", ATA_HORKAGE_BROKEN_FPDMA_AA },
4129
4130 /* Blacklist entries taken from Silicon Image 3124/3132
4131 Windows driver .inf file - also several Linux problem reports */
4132 { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ },
4133 { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ },
4134 { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ },
4135
4136 /* https://bugzilla.kernel.org/show_bug.cgi?id=15573 */
4137 { "C300-CTFDDAC128MAG", "0001", ATA_HORKAGE_NONCQ },
4138
4139 /* Sandisk SD7/8/9s lock up hard on large trims */
4140 { "SanDisk SD[789]*", NULL, ATA_HORKAGE_MAX_TRIM_128M },
4141
4142 /* devices which puke on READ_NATIVE_MAX */
4143 { "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA },
4144 { "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA },
4145 { "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
4146 { "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA },
4147
4148 /* this one allows HPA unlocking but fails IOs on the area */
4149 { "OCZ-VERTEX", "1.30", ATA_HORKAGE_BROKEN_HPA },
4150
4151 /* Devices which report 1 sector over size HPA */
4152 { "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE },
4153 { "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE },
4154 { "ST310211A", NULL, ATA_HORKAGE_HPA_SIZE },
4155
4156 /* Devices which get the IVB wrong */
4157 { "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB },
4158 /* Maybe we should just blacklist TSSTcorp... */
4159 { "TSSTcorp CDDVDW SH-S202[HJN]", "SB0[01]", ATA_HORKAGE_IVB },
4160
4161 /* Devices that do not need bridging limits applied */
4162 { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK },
4163 { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK },
4164
4165 /* Devices which aren't very happy with higher link speeds */
4166 { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS },
4167 { "Seagate FreeAgent GoFlex", NULL, ATA_HORKAGE_1_5_GBPS },
4168
4169 /*
4170 * Devices which choke on SETXFER. Applies only if both the
4171 * device and controller are SATA.
4172 */
4173 { "PIONEER DVD-RW DVRTD08", NULL, ATA_HORKAGE_NOSETXFER },
4174 { "PIONEER DVD-RW DVRTD08A", NULL, ATA_HORKAGE_NOSETXFER },
4175 { "PIONEER DVD-RW DVR-215", NULL, ATA_HORKAGE_NOSETXFER },
4176 { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER },
4177 { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
4178
4179 /* These specific Pioneer models have LPM issues */
4180 { "PIONEER BD-RW BDR-207M", NULL, ATA_HORKAGE_NOLPM },
4181 { "PIONEER BD-RW BDR-205", NULL, ATA_HORKAGE_NOLPM },
4182
4183 /* Crucial BX100 SSD 500GB has broken LPM support */
4184 { "CT500BX100SSD1", NULL, ATA_HORKAGE_NOLPM },
4185
4186 /* 512GB MX100 with MU01 firmware has both queued TRIM and LPM issues */
4187 { "Crucial_CT512MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
4188 ATA_HORKAGE_ZERO_AFTER_TRIM |
4189 ATA_HORKAGE_NOLPM },
4190 /* 512GB MX100 with newer firmware has only LPM issues */
4191 { "Crucial_CT512MX100*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM |
4192 ATA_HORKAGE_NOLPM },
4193
4194 /* 480GB+ M500 SSDs have both queued TRIM and LPM issues */
4195 { "Crucial_CT480M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4196 ATA_HORKAGE_ZERO_AFTER_TRIM |
4197 ATA_HORKAGE_NOLPM },
4198 { "Crucial_CT960M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4199 ATA_HORKAGE_ZERO_AFTER_TRIM |
4200 ATA_HORKAGE_NOLPM },
4201
4202 /* These specific Samsung models/firmware-revs do not handle LPM well */
4203 { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM },
4204 { "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM },
4205 { "SAMSUNG MZ7TD256HAFV-000L9", NULL, ATA_HORKAGE_NOLPM },
4206 { "SAMSUNG MZ7TE512HMHP-000L1", "EXT06L0Q", ATA_HORKAGE_NOLPM },
4207
4208 /* devices that don't properly handle queued TRIM commands */
4209 { "Micron_M500IT_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
4210 ATA_HORKAGE_ZERO_AFTER_TRIM },
4211 { "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4212 ATA_HORKAGE_ZERO_AFTER_TRIM },
4213 { "Micron_M5[15]0_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
4214 ATA_HORKAGE_ZERO_AFTER_TRIM },
4215 { "Micron_1100_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4216 ATA_HORKAGE_ZERO_AFTER_TRIM, },
4217 { "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4218 ATA_HORKAGE_ZERO_AFTER_TRIM },
4219 { "Crucial_CT*M550*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
4220 ATA_HORKAGE_ZERO_AFTER_TRIM },
4221 { "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
4222 ATA_HORKAGE_ZERO_AFTER_TRIM },
4223 { "Samsung SSD 840 EVO*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4224 ATA_HORKAGE_NO_DMA_LOG |
4225 ATA_HORKAGE_ZERO_AFTER_TRIM },
4226 { "Samsung SSD 840*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4227 ATA_HORKAGE_ZERO_AFTER_TRIM },
4228 { "Samsung SSD 850*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4229 ATA_HORKAGE_ZERO_AFTER_TRIM },
4230 { "Samsung SSD 860*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4231 ATA_HORKAGE_ZERO_AFTER_TRIM |
4232 ATA_HORKAGE_NO_NCQ_ON_ATI },
4233 { "Samsung SSD 870*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4234 ATA_HORKAGE_ZERO_AFTER_TRIM |
4235 ATA_HORKAGE_NO_NCQ_ON_ATI },
4236 { "SAMSUNG*MZ7LH*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4237 ATA_HORKAGE_ZERO_AFTER_TRIM |
4238 ATA_HORKAGE_NO_NCQ_ON_ATI, },
4239 { "FCCT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
4240 ATA_HORKAGE_ZERO_AFTER_TRIM },
4241
4242 /* devices that don't properly handle TRIM commands */
4243 { "SuperSSpeed S238*", NULL, ATA_HORKAGE_NOTRIM },
4244 { "M88V29*", NULL, ATA_HORKAGE_NOTRIM },
4245
4246 /*
4247 * As defined, the DRAT (Deterministic Read After Trim) and RZAT
4248 * (Return Zero After Trim) flags in the ATA Command Set are
4249 * unreliable in the sense that they only define what happens if
4250 * the device successfully executed the DSM TRIM command. TRIM
4251 * is only advisory, however, and the device is free to silently
4252 * ignore all or parts of the request.
4253 *
4254 * Whitelist drives that are known to reliably return zeroes
4255 * after TRIM.
4256 */
4257
4258 /*
4259 * The intel 510 drive has buggy DRAT/RZAT. Explicitly exclude
4260 * that model before whitelisting all other intel SSDs.
4261 */
4262 { "INTEL*SSDSC2MH*", NULL, 0 },
4263
4264 { "Micron*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
4265 { "Crucial*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
4266 { "INTEL*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
4267 { "SSD*INTEL*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
4268 { "Samsung*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
4269 { "SAMSUNG*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
4270 { "SAMSUNG*MZ7KM*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
4271 { "ST[1248][0248]0[FH]*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM },
4272
4273 /*
4274 * Some WD SATA-I drives spin up and down erratically when the link
4275 * is put into the slumber mode. We don't have full list of the
4276 * affected devices. Disable LPM if the device matches one of the
4277 * known prefixes and is SATA-1. As a side effect LPM partial is
4278 * lost too.
4279 *
4280 * https://bugzilla.kernel.org/show_bug.cgi?id=57211
4281 */
4282 { "WDC WD800JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
4283 { "WDC WD1200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
4284 { "WDC WD1600JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
4285 { "WDC WD2000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
4286 { "WDC WD2500JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
4287 { "WDC WD3000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
4288 { "WDC WD3200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
4289
4290 /*
4291 * This sata dom device goes on a walkabout when the ATA_LOG_DIRECTORY
4292 * log page is accessed. Ensure we never ask for this log page with
4293 * these devices.
4294 */
4295 { "SATADOM-ML 3ME", NULL, ATA_HORKAGE_NO_LOG_DIR },
4296
4297 /* Buggy FUA */
4298 { "Maxtor", "BANC1G10", ATA_HORKAGE_NO_FUA },
4299 { "WDC*WD2500J*", NULL, ATA_HORKAGE_NO_FUA },
4300 { "OCZ-VERTEX*", NULL, ATA_HORKAGE_NO_FUA },
4301 { "INTEL*SSDSC2CT*", NULL, ATA_HORKAGE_NO_FUA },
4302
4303 /* End Marker */
4304 { }
4305};
4306
4307static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
4308{
4309 unsigned char model_num[ATA_ID_PROD_LEN + 1];
4310 unsigned char model_rev[ATA_ID_FW_REV_LEN + 1];
4311 const struct ata_blacklist_entry *ad = ata_device_blacklist;
4312
4313 ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
4314 ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev));
4315
4316 while (ad->model_num) {
4317 if (glob_match(ad->model_num, model_num)) {
4318 if (ad->model_rev == NULL)
4319 return ad->horkage;
4320 if (glob_match(ad->model_rev, model_rev))
4321 return ad->horkage;
4322 }
4323 ad++;
4324 }
4325 return 0;
4326}
4327
4328static int ata_dma_blacklisted(const struct ata_device *dev)
4329{
4330 /* We don't support polling DMA.
4331 * DMA blacklist those ATAPI devices with CDB-intr (and use PIO)
4332 * if the LLDD handles only interrupts in the HSM_ST_LAST state.
4333 */
4334 if ((dev->link->ap->flags & ATA_FLAG_PIO_POLLING) &&
4335 (dev->flags & ATA_DFLAG_CDB_INTR))
4336 return 1;
4337 return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0;
4338}
4339
4340/**
4341 * ata_is_40wire - check drive side detection
4342 * @dev: device
4343 *
4344 * Perform drive side detection decoding, allowing for device vendors
4345 * who can't follow the documentation.
4346 */
4347
4348static int ata_is_40wire(struct ata_device *dev)
4349{
4350 if (dev->horkage & ATA_HORKAGE_IVB)
4351 return ata_drive_40wire_relaxed(dev->id);
4352 return ata_drive_40wire(dev->id);
4353}
4354
4355/**
4356 * cable_is_40wire - 40/80/SATA decider
4357 * @ap: port to consider
4358 *
4359 * This function encapsulates the policy for speed management
4360 * in one place. At the moment we don't cache the result but
4361 * there is a good case for setting ap->cbl to the result when
4362 * we are called with unknown cables (and figuring out if it
4363 * impacts hotplug at all).
4364 *
4365 * Return 1 if the cable appears to be 40 wire.
4366 */
4367
4368static int cable_is_40wire(struct ata_port *ap)
4369{
4370 struct ata_link *link;
4371 struct ata_device *dev;
4372
4373 /* If the controller thinks we are 40 wire, we are. */
4374 if (ap->cbl == ATA_CBL_PATA40)
4375 return 1;
4376
4377 /* If the controller thinks we are 80 wire, we are. */
4378 if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
4379 return 0;
4380
4381 /* If the system is known to be 40 wire short cable (eg
4382 * laptop), then we allow 80 wire modes even if the drive
4383 * isn't sure.
4384 */
4385 if (ap->cbl == ATA_CBL_PATA40_SHORT)
4386 return 0;
4387
4388 /* If the controller doesn't know, we scan.
4389 *
4390 * Note: We look for all 40 wire detects at this point. Any
4391 * 80 wire detect is taken to be 80 wire cable because
4392 * - in many setups only the one drive (slave if present) will
4393 * give a valid detect
4394 * - if you have a non detect capable drive you don't want it
4395 * to colour the choice
4396 */
4397 ata_for_each_link(link, ap, EDGE) {
4398 ata_for_each_dev(dev, link, ENABLED) {
4399 if (!ata_is_40wire(dev))
4400 return 0;
4401 }
4402 }
4403 return 1;
4404}
4405
4406/**
4407 * ata_dev_xfermask - Compute supported xfermask of the given device
4408 * @dev: Device to compute xfermask for
4409 *
4410 * Compute supported xfermask of @dev and store it in
4411 * dev->*_mask. This function is responsible for applying all
4412 * known limits including host controller limits, device
4413 * blacklist, etc...
4414 *
4415 * LOCKING:
4416 * None.
4417 */
4418static void ata_dev_xfermask(struct ata_device *dev)
4419{
4420 struct ata_link *link = dev->link;
4421 struct ata_port *ap = link->ap;
4422 struct ata_host *host = ap->host;
4423 unsigned int xfer_mask;
4424
4425 /* controller modes available */
4426 xfer_mask = ata_pack_xfermask(ap->pio_mask,
4427 ap->mwdma_mask, ap->udma_mask);
4428
4429 /* drive modes available */
4430 xfer_mask &= ata_pack_xfermask(dev->pio_mask,
4431 dev->mwdma_mask, dev->udma_mask);
4432 xfer_mask &= ata_id_xfermask(dev->id);
4433
4434 /*
4435 * CFA Advanced TrueIDE timings are not allowed on a shared
4436 * cable
4437 */
4438 if (ata_dev_pair(dev)) {
4439 /* No PIO5 or PIO6 */
4440 xfer_mask &= ~(0x03 << (ATA_SHIFT_PIO + 5));
4441 /* No MWDMA3 or MWDMA 4 */
4442 xfer_mask &= ~(0x03 << (ATA_SHIFT_MWDMA + 3));
4443 }
4444
4445 if (ata_dma_blacklisted(dev)) {
4446 xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
4447 ata_dev_warn(dev,
4448 "device is on DMA blacklist, disabling DMA\n");
4449 }
4450
4451 if ((host->flags & ATA_HOST_SIMPLEX) &&
4452 host->simplex_claimed && host->simplex_claimed != ap) {
4453 xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
4454 ata_dev_warn(dev,
4455 "simplex DMA is claimed by other device, disabling DMA\n");
4456 }
4457
4458 if (ap->flags & ATA_FLAG_NO_IORDY)
4459 xfer_mask &= ata_pio_mask_no_iordy(dev);
4460
4461 if (ap->ops->mode_filter)
4462 xfer_mask = ap->ops->mode_filter(dev, xfer_mask);
4463
4464 /* Apply cable rule here. Don't apply it early because when
4465 * we handle hot plug the cable type can itself change.
4466 * Check this last so that we know if the transfer rate was
4467 * solely limited by the cable.
4468 * Unknown or 80 wire cables reported host side are checked
4469 * drive side as well. Cases where we know a 40wire cable
4470 * is used safely for 80 are not checked here.
4471 */
4472 if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
4473 /* UDMA/44 or higher would be available */
4474 if (cable_is_40wire(ap)) {
4475 ata_dev_warn(dev,
4476 "limited to UDMA/33 due to 40-wire cable\n");
4477 xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
4478 }
4479
4480 ata_unpack_xfermask(xfer_mask, &dev->pio_mask,
4481 &dev->mwdma_mask, &dev->udma_mask);
4482}
4483
4484/**
4485 * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command
4486 * @dev: Device to which command will be sent
4487 *
4488 * Issue SET FEATURES - XFER MODE command to device @dev
4489 * on port @ap.
4490 *
4491 * LOCKING:
4492 * PCI/etc. bus probe sem.
4493 *
4494 * RETURNS:
4495 * 0 on success, AC_ERR_* mask otherwise.
4496 */
4497
4498static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
4499{
4500 struct ata_taskfile tf;
4501
4502 /* set up set-features taskfile */
4503 ata_dev_dbg(dev, "set features - xfer mode\n");
4504
4505 /* Some controllers and ATAPI devices show flaky interrupt
4506 * behavior after setting xfer mode. Use polling instead.
4507 */
4508 ata_tf_init(dev, &tf);
4509 tf.command = ATA_CMD_SET_FEATURES;
4510 tf.feature = SETFEATURES_XFER;
4511 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING;
4512 tf.protocol = ATA_PROT_NODATA;
4513 /* If we are using IORDY we must send the mode setting command */
4514 if (ata_pio_need_iordy(dev))
4515 tf.nsect = dev->xfer_mode;
4516 /* If the device has IORDY and the controller does not - turn it off */
4517 else if (ata_id_has_iordy(dev->id))
4518 tf.nsect = 0x01;
4519 else /* In the ancient relic department - skip all of this */
4520 return 0;
4521
4522 /*
4523 * On some disks, this command causes spin-up, so we need longer
4524 * timeout.
4525 */
4526 return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000);
4527}
4528
4529/**
4530 * ata_dev_set_feature - Issue SET FEATURES
4531 * @dev: Device to which command will be sent
4532 * @subcmd: The SET FEATURES subcommand to be sent
4533 * @action: The sector count represents a subcommand specific action
4534 *
4535 * Issue SET FEATURES command to device @dev on port @ap with sector count
4536 *
4537 * LOCKING:
4538 * PCI/etc. bus probe sem.
4539 *
4540 * RETURNS:
4541 * 0 on success, AC_ERR_* mask otherwise.
4542 */
4543unsigned int ata_dev_set_feature(struct ata_device *dev, u8 subcmd, u8 action)
4544{
4545 struct ata_taskfile tf;
4546 unsigned int timeout = 0;
4547
4548 /* set up set-features taskfile */
4549 ata_dev_dbg(dev, "set features\n");
4550
4551 ata_tf_init(dev, &tf);
4552 tf.command = ATA_CMD_SET_FEATURES;
4553 tf.feature = subcmd;
4554 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
4555 tf.protocol = ATA_PROT_NODATA;
4556 tf.nsect = action;
4557
4558 if (subcmd == SETFEATURES_SPINUP)
4559 timeout = ata_probe_timeout ?
4560 ata_probe_timeout * 1000 : SETFEATURES_SPINUP_TIMEOUT;
4561
4562 return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, timeout);
4563}
4564EXPORT_SYMBOL_GPL(ata_dev_set_feature);
4565
4566/**
4567 * ata_dev_init_params - Issue INIT DEV PARAMS command
4568 * @dev: Device to which command will be sent
4569 * @heads: Number of heads (taskfile parameter)
4570 * @sectors: Number of sectors (taskfile parameter)
4571 *
4572 * LOCKING:
4573 * Kernel thread context (may sleep)
4574 *
4575 * RETURNS:
4576 * 0 on success, AC_ERR_* mask otherwise.
4577 */
4578static unsigned int ata_dev_init_params(struct ata_device *dev,
4579 u16 heads, u16 sectors)
4580{
4581 struct ata_taskfile tf;
4582 unsigned int err_mask;
4583
4584 /* Number of sectors per track 1-255. Number of heads 1-16 */
4585 if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
4586 return AC_ERR_INVALID;
4587
4588 /* set up init dev params taskfile */
4589 ata_dev_dbg(dev, "init dev params \n");
4590
4591 ata_tf_init(dev, &tf);
4592 tf.command = ATA_CMD_INIT_DEV_PARAMS;
4593 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
4594 tf.protocol = ATA_PROT_NODATA;
4595 tf.nsect = sectors;
4596 tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
4597
4598 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
4599 /* A clean abort indicates an original or just out of spec drive
4600 and we should continue as we issue the setup based on the
4601 drive reported working geometry */
4602 if (err_mask == AC_ERR_DEV && (tf.error & ATA_ABORTED))
4603 err_mask = 0;
4604
4605 return err_mask;
4606}
4607
4608/**
4609 * atapi_check_dma - Check whether ATAPI DMA can be supported
4610 * @qc: Metadata associated with taskfile to check
4611 *
4612 * Allow low-level driver to filter ATA PACKET commands, returning
4613 * a status indicating whether or not it is OK to use DMA for the
4614 * supplied PACKET command.
4615 *
4616 * LOCKING:
4617 * spin_lock_irqsave(host lock)
4618 *
4619 * RETURNS: 0 when ATAPI DMA can be used
4620 * nonzero otherwise
4621 */
4622int atapi_check_dma(struct ata_queued_cmd *qc)
4623{
4624 struct ata_port *ap = qc->ap;
4625
4626 /* Don't allow DMA if it isn't multiple of 16 bytes. Quite a
4627 * few ATAPI devices choke on such DMA requests.
4628 */
4629 if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) &&
4630 unlikely(qc->nbytes & 15))
4631 return 1;
4632
4633 if (ap->ops->check_atapi_dma)
4634 return ap->ops->check_atapi_dma(qc);
4635
4636 return 0;
4637}
4638
4639/**
4640 * ata_std_qc_defer - Check whether a qc needs to be deferred
4641 * @qc: ATA command in question
4642 *
4643 * Non-NCQ commands cannot run with any other command, NCQ or
4644 * not. As upper layer only knows the queue depth, we are
4645 * responsible for maintaining exclusion. This function checks
4646 * whether a new command @qc can be issued.
4647 *
4648 * LOCKING:
4649 * spin_lock_irqsave(host lock)
4650 *
4651 * RETURNS:
4652 * ATA_DEFER_* if deferring is needed, 0 otherwise.
4653 */
4654int ata_std_qc_defer(struct ata_queued_cmd *qc)
4655{
4656 struct ata_link *link = qc->dev->link;
4657
4658 if (ata_is_ncq(qc->tf.protocol)) {
4659 if (!ata_tag_valid(link->active_tag))
4660 return 0;
4661 } else {
4662 if (!ata_tag_valid(link->active_tag) && !link->sactive)
4663 return 0;
4664 }
4665
4666 return ATA_DEFER_LINK;
4667}
4668EXPORT_SYMBOL_GPL(ata_std_qc_defer);
4669
4670enum ata_completion_errors ata_noop_qc_prep(struct ata_queued_cmd *qc)
4671{
4672 return AC_ERR_OK;
4673}
4674EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
4675
4676/**
4677 * ata_sg_init - Associate command with scatter-gather table.
4678 * @qc: Command to be associated
4679 * @sg: Scatter-gather table.
4680 * @n_elem: Number of elements in s/g table.
4681 *
4682 * Initialize the data-related elements of queued_cmd @qc
4683 * to point to a scatter-gather table @sg, containing @n_elem
4684 * elements.
4685 *
4686 * LOCKING:
4687 * spin_lock_irqsave(host lock)
4688 */
4689void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
4690 unsigned int n_elem)
4691{
4692 qc->sg = sg;
4693 qc->n_elem = n_elem;
4694 qc->cursg = qc->sg;
4695}
4696
4697#ifdef CONFIG_HAS_DMA
4698
4699/**
4700 * ata_sg_clean - Unmap DMA memory associated with command
4701 * @qc: Command containing DMA memory to be released
4702 *
4703 * Unmap all mapped DMA memory associated with this command.
4704 *
4705 * LOCKING:
4706 * spin_lock_irqsave(host lock)
4707 */
4708static void ata_sg_clean(struct ata_queued_cmd *qc)
4709{
4710 struct ata_port *ap = qc->ap;
4711 struct scatterlist *sg = qc->sg;
4712 int dir = qc->dma_dir;
4713
4714 WARN_ON_ONCE(sg == NULL);
4715
4716 if (qc->n_elem)
4717 dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
4718
4719 qc->flags &= ~ATA_QCFLAG_DMAMAP;
4720 qc->sg = NULL;
4721}
4722
4723/**
4724 * ata_sg_setup - DMA-map the scatter-gather table associated with a command.
4725 * @qc: Command with scatter-gather table to be mapped.
4726 *
4727 * DMA-map the scatter-gather table associated with queued_cmd @qc.
4728 *
4729 * LOCKING:
4730 * spin_lock_irqsave(host lock)
4731 *
4732 * RETURNS:
4733 * Zero on success, negative on error.
4734 *
4735 */
4736static int ata_sg_setup(struct ata_queued_cmd *qc)
4737{
4738 struct ata_port *ap = qc->ap;
4739 unsigned int n_elem;
4740
4741 n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir);
4742 if (n_elem < 1)
4743 return -1;
4744
4745 qc->orig_n_elem = qc->n_elem;
4746 qc->n_elem = n_elem;
4747 qc->flags |= ATA_QCFLAG_DMAMAP;
4748
4749 return 0;
4750}
4751
4752#else /* !CONFIG_HAS_DMA */
4753
4754static inline void ata_sg_clean(struct ata_queued_cmd *qc) {}
4755static inline int ata_sg_setup(struct ata_queued_cmd *qc) { return -1; }
4756
4757#endif /* !CONFIG_HAS_DMA */
4758
4759/**
4760 * swap_buf_le16 - swap halves of 16-bit words in place
4761 * @buf: Buffer to swap
4762 * @buf_words: Number of 16-bit words in buffer.
4763 *
4764 * Swap halves of 16-bit words if needed to convert from
4765 * little-endian byte order to native cpu byte order, or
4766 * vice-versa.
4767 *
4768 * LOCKING:
4769 * Inherited from caller.
4770 */
4771void swap_buf_le16(u16 *buf, unsigned int buf_words)
4772{
4773#ifdef __BIG_ENDIAN
4774 unsigned int i;
4775
4776 for (i = 0; i < buf_words; i++)
4777 buf[i] = le16_to_cpu(buf[i]);
4778#endif /* __BIG_ENDIAN */
4779}
4780
4781/**
4782 * ata_qc_free - free unused ata_queued_cmd
4783 * @qc: Command to complete
4784 *
4785 * Designed to free unused ata_queued_cmd object
4786 * in case something prevents using it.
4787 *
4788 * LOCKING:
4789 * spin_lock_irqsave(host lock)
4790 */
4791void ata_qc_free(struct ata_queued_cmd *qc)
4792{
4793 qc->flags = 0;
4794 if (ata_tag_valid(qc->tag))
4795 qc->tag = ATA_TAG_POISON;
4796}
4797
4798void __ata_qc_complete(struct ata_queued_cmd *qc)
4799{
4800 struct ata_port *ap;
4801 struct ata_link *link;
4802
4803 WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
4804 WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE));
4805 ap = qc->ap;
4806 link = qc->dev->link;
4807
4808 if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
4809 ata_sg_clean(qc);
4810
4811 /* command should be marked inactive atomically with qc completion */
4812 if (ata_is_ncq(qc->tf.protocol)) {
4813 link->sactive &= ~(1 << qc->hw_tag);
4814 if (!link->sactive)
4815 ap->nr_active_links--;
4816 } else {
4817 link->active_tag = ATA_TAG_POISON;
4818 ap->nr_active_links--;
4819 }
4820
4821 /* clear exclusive status */
4822 if (unlikely(qc->flags & ATA_QCFLAG_CLEAR_EXCL &&
4823 ap->excl_link == link))
4824 ap->excl_link = NULL;
4825
4826 /* atapi: mark qc as inactive to prevent the interrupt handler
4827 * from completing the command twice later, before the error handler
4828 * is called. (when rc != 0 and atapi request sense is needed)
4829 */
4830 qc->flags &= ~ATA_QCFLAG_ACTIVE;
4831 ap->qc_active &= ~(1ULL << qc->tag);
4832
4833 /* call completion callback */
4834 qc->complete_fn(qc);
4835}
4836
4837static void fill_result_tf(struct ata_queued_cmd *qc)
4838{
4839 struct ata_port *ap = qc->ap;
4840
4841 qc->result_tf.flags = qc->tf.flags;
4842 ap->ops->qc_fill_rtf(qc);
4843}
4844
4845static void ata_verify_xfer(struct ata_queued_cmd *qc)
4846{
4847 struct ata_device *dev = qc->dev;
4848
4849 if (!ata_is_data(qc->tf.protocol))
4850 return;
4851
4852 if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol))
4853 return;
4854
4855 dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER;
4856}
4857
4858/**
4859 * ata_qc_complete - Complete an active ATA command
4860 * @qc: Command to complete
4861 *
4862 * Indicate to the mid and upper layers that an ATA command has
4863 * completed, with either an ok or not-ok status.
4864 *
4865 * Refrain from calling this function multiple times when
4866 * successfully completing multiple NCQ commands.
4867 * ata_qc_complete_multiple() should be used instead, which will
4868 * properly update IRQ expect state.
4869 *
4870 * LOCKING:
4871 * spin_lock_irqsave(host lock)
4872 */
4873void ata_qc_complete(struct ata_queued_cmd *qc)
4874{
4875 struct ata_port *ap = qc->ap;
4876 struct ata_device *dev = qc->dev;
4877 struct ata_eh_info *ehi = &dev->link->eh_info;
4878
4879 /* Trigger the LED (if available) */
4880 ledtrig_disk_activity(!!(qc->tf.flags & ATA_TFLAG_WRITE));
4881
4882 /*
4883 * In order to synchronize EH with the regular execution path, a qc that
4884 * is owned by EH is marked with ATA_QCFLAG_EH.
4885 *
4886 * The normal execution path is responsible for not accessing a qc owned
4887 * by EH. libata core enforces the rule by returning NULL from
4888 * ata_qc_from_tag() for qcs owned by EH.
4889 */
4890 if (unlikely(qc->err_mask))
4891 qc->flags |= ATA_QCFLAG_EH;
4892
4893 /*
4894 * Finish internal commands without any further processing and always
4895 * with the result TF filled.
4896 */
4897 if (unlikely(ata_tag_internal(qc->tag))) {
4898 fill_result_tf(qc);
4899 trace_ata_qc_complete_internal(qc);
4900 __ata_qc_complete(qc);
4901 return;
4902 }
4903
4904 /* Non-internal qc has failed. Fill the result TF and summon EH. */
4905 if (unlikely(qc->flags & ATA_QCFLAG_EH)) {
4906 fill_result_tf(qc);
4907 trace_ata_qc_complete_failed(qc);
4908 ata_qc_schedule_eh(qc);
4909 return;
4910 }
4911
4912 WARN_ON_ONCE(ata_port_is_frozen(ap));
4913
4914 /* read result TF if requested */
4915 if (qc->flags & ATA_QCFLAG_RESULT_TF)
4916 fill_result_tf(qc);
4917
4918 trace_ata_qc_complete_done(qc);
4919
4920 /*
4921 * For CDL commands that completed without an error, check if we have
4922 * sense data (ATA_SENSE is set). If we do, then the command may have
4923 * been aborted by the device due to a limit timeout using the policy
4924 * 0xD. For these commands, invoke EH to get the command sense data.
4925 */
4926 if (qc->flags & ATA_QCFLAG_HAS_CDL &&
4927 qc->result_tf.status & ATA_SENSE) {
4928 /*
4929 * Tell SCSI EH to not overwrite scmd->result even if this
4930 * command is finished with result SAM_STAT_GOOD.
4931 */
4932 qc->scsicmd->flags |= SCMD_FORCE_EH_SUCCESS;
4933 qc->flags |= ATA_QCFLAG_EH_SUCCESS_CMD;
4934 ehi->dev_action[dev->devno] |= ATA_EH_GET_SUCCESS_SENSE;
4935
4936 /*
4937 * set pending so that ata_qc_schedule_eh() does not trigger
4938 * fast drain, and freeze the port.
4939 */
4940 ap->pflags |= ATA_PFLAG_EH_PENDING;
4941 ata_qc_schedule_eh(qc);
4942 return;
4943 }
4944
4945 /* Some commands need post-processing after successful completion. */
4946 switch (qc->tf.command) {
4947 case ATA_CMD_SET_FEATURES:
4948 if (qc->tf.feature != SETFEATURES_WC_ON &&
4949 qc->tf.feature != SETFEATURES_WC_OFF &&
4950 qc->tf.feature != SETFEATURES_RA_ON &&
4951 qc->tf.feature != SETFEATURES_RA_OFF)
4952 break;
4953 fallthrough;
4954 case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
4955 case ATA_CMD_SET_MULTI: /* multi_count changed */
4956 /* revalidate device */
4957 ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE;
4958 ata_port_schedule_eh(ap);
4959 break;
4960
4961 case ATA_CMD_SLEEP:
4962 dev->flags |= ATA_DFLAG_SLEEPING;
4963 break;
4964 }
4965
4966 if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER))
4967 ata_verify_xfer(qc);
4968
4969 __ata_qc_complete(qc);
4970}
4971EXPORT_SYMBOL_GPL(ata_qc_complete);
4972
4973/**
4974 * ata_qc_get_active - get bitmask of active qcs
4975 * @ap: port in question
4976 *
4977 * LOCKING:
4978 * spin_lock_irqsave(host lock)
4979 *
4980 * RETURNS:
4981 * Bitmask of active qcs
4982 */
4983u64 ata_qc_get_active(struct ata_port *ap)
4984{
4985 u64 qc_active = ap->qc_active;
4986
4987 /* ATA_TAG_INTERNAL is sent to hw as tag 0 */
4988 if (qc_active & (1ULL << ATA_TAG_INTERNAL)) {
4989 qc_active |= (1 << 0);
4990 qc_active &= ~(1ULL << ATA_TAG_INTERNAL);
4991 }
4992
4993 return qc_active;
4994}
4995EXPORT_SYMBOL_GPL(ata_qc_get_active);
4996
4997/**
4998 * ata_qc_issue - issue taskfile to device
4999 * @qc: command to issue to device
5000 *
5001 * Prepare an ATA command to submission to device.
5002 * This includes mapping the data into a DMA-able
5003 * area, filling in the S/G table, and finally
5004 * writing the taskfile to hardware, starting the command.
5005 *
5006 * LOCKING:
5007 * spin_lock_irqsave(host lock)
5008 */
5009void ata_qc_issue(struct ata_queued_cmd *qc)
5010{
5011 struct ata_port *ap = qc->ap;
5012 struct ata_link *link = qc->dev->link;
5013 u8 prot = qc->tf.protocol;
5014
5015 /* Make sure only one non-NCQ command is outstanding. */
5016 WARN_ON_ONCE(ata_tag_valid(link->active_tag));
5017
5018 if (ata_is_ncq(prot)) {
5019 WARN_ON_ONCE(link->sactive & (1 << qc->hw_tag));
5020
5021 if (!link->sactive)
5022 ap->nr_active_links++;
5023 link->sactive |= 1 << qc->hw_tag;
5024 } else {
5025 WARN_ON_ONCE(link->sactive);
5026
5027 ap->nr_active_links++;
5028 link->active_tag = qc->tag;
5029 }
5030
5031 qc->flags |= ATA_QCFLAG_ACTIVE;
5032 ap->qc_active |= 1ULL << qc->tag;
5033
5034 /*
5035 * We guarantee to LLDs that they will have at least one
5036 * non-zero sg if the command is a data command.
5037 */
5038 if (ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes))
5039 goto sys_err;
5040
5041 if (ata_is_dma(prot) || (ata_is_pio(prot) &&
5042 (ap->flags & ATA_FLAG_PIO_DMA)))
5043 if (ata_sg_setup(qc))
5044 goto sys_err;
5045
5046 /* if device is sleeping, schedule reset and abort the link */
5047 if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
5048 link->eh_info.action |= ATA_EH_RESET;
5049 ata_ehi_push_desc(&link->eh_info, "waking up from sleep");
5050 ata_link_abort(link);
5051 return;
5052 }
5053
5054 trace_ata_qc_prep(qc);
5055 qc->err_mask |= ap->ops->qc_prep(qc);
5056 if (unlikely(qc->err_mask))
5057 goto err;
5058 trace_ata_qc_issue(qc);
5059 qc->err_mask |= ap->ops->qc_issue(qc);
5060 if (unlikely(qc->err_mask))
5061 goto err;
5062 return;
5063
5064sys_err:
5065 qc->err_mask |= AC_ERR_SYSTEM;
5066err:
5067 ata_qc_complete(qc);
5068}
5069
5070/**
5071 * ata_phys_link_online - test whether the given link is online
5072 * @link: ATA link to test
5073 *
5074 * Test whether @link is online. Note that this function returns
5075 * 0 if online status of @link cannot be obtained, so
5076 * ata_link_online(link) != !ata_link_offline(link).
5077 *
5078 * LOCKING:
5079 * None.
5080 *
5081 * RETURNS:
5082 * True if the port online status is available and online.
5083 */
5084bool ata_phys_link_online(struct ata_link *link)
5085{
5086 u32 sstatus;
5087
5088 if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
5089 ata_sstatus_online(sstatus))
5090 return true;
5091 return false;
5092}
5093
5094/**
5095 * ata_phys_link_offline - test whether the given link is offline
5096 * @link: ATA link to test
5097 *
5098 * Test whether @link is offline. Note that this function
5099 * returns 0 if offline status of @link cannot be obtained, so
5100 * ata_link_online(link) != !ata_link_offline(link).
5101 *
5102 * LOCKING:
5103 * None.
5104 *
5105 * RETURNS:
5106 * True if the port offline status is available and offline.
5107 */
5108bool ata_phys_link_offline(struct ata_link *link)
5109{
5110 u32 sstatus;
5111
5112 if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
5113 !ata_sstatus_online(sstatus))
5114 return true;
5115 return false;
5116}
5117
5118/**
5119 * ata_link_online - test whether the given link is online
5120 * @link: ATA link to test
5121 *
5122 * Test whether @link is online. This is identical to
5123 * ata_phys_link_online() when there's no slave link. When
5124 * there's a slave link, this function should only be called on
5125 * the master link and will return true if any of M/S links is
5126 * online.
5127 *
5128 * LOCKING:
5129 * None.
5130 *
5131 * RETURNS:
5132 * True if the port online status is available and online.
5133 */
5134bool ata_link_online(struct ata_link *link)
5135{
5136 struct ata_link *slave = link->ap->slave_link;
5137
5138 WARN_ON(link == slave); /* shouldn't be called on slave link */
5139
5140 return ata_phys_link_online(link) ||
5141 (slave && ata_phys_link_online(slave));
5142}
5143EXPORT_SYMBOL_GPL(ata_link_online);
5144
5145/**
5146 * ata_link_offline - test whether the given link is offline
5147 * @link: ATA link to test
5148 *
5149 * Test whether @link is offline. This is identical to
5150 * ata_phys_link_offline() when there's no slave link. When
5151 * there's a slave link, this function should only be called on
5152 * the master link and will return true if both M/S links are
5153 * offline.
5154 *
5155 * LOCKING:
5156 * None.
5157 *
5158 * RETURNS:
5159 * True if the port offline status is available and offline.
5160 */
5161bool ata_link_offline(struct ata_link *link)
5162{
5163 struct ata_link *slave = link->ap->slave_link;
5164
5165 WARN_ON(link == slave); /* shouldn't be called on slave link */
5166
5167 return ata_phys_link_offline(link) &&
5168 (!slave || ata_phys_link_offline(slave));
5169}
5170EXPORT_SYMBOL_GPL(ata_link_offline);
5171
5172#ifdef CONFIG_PM
5173static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
5174 unsigned int action, unsigned int ehi_flags,
5175 bool async)
5176{
5177 struct ata_link *link;
5178 unsigned long flags;
5179
5180 spin_lock_irqsave(ap->lock, flags);
5181
5182 /*
5183 * A previous PM operation might still be in progress. Wait for
5184 * ATA_PFLAG_PM_PENDING to clear.
5185 */
5186 if (ap->pflags & ATA_PFLAG_PM_PENDING) {
5187 spin_unlock_irqrestore(ap->lock, flags);
5188 ata_port_wait_eh(ap);
5189 spin_lock_irqsave(ap->lock, flags);
5190 }
5191
5192 /* Request PM operation to EH */
5193 ap->pm_mesg = mesg;
5194 ap->pflags |= ATA_PFLAG_PM_PENDING;
5195 ata_for_each_link(link, ap, HOST_FIRST) {
5196 link->eh_info.action |= action;
5197 link->eh_info.flags |= ehi_flags;
5198 }
5199
5200 ata_port_schedule_eh(ap);
5201
5202 spin_unlock_irqrestore(ap->lock, flags);
5203
5204 if (!async)
5205 ata_port_wait_eh(ap);
5206}
5207
5208static void ata_port_suspend(struct ata_port *ap, pm_message_t mesg,
5209 bool async)
5210{
5211 /*
5212 * We are about to suspend the port, so we do not care about
5213 * scsi_rescan_device() calls scheduled by previous resume operations.
5214 * The next resume will schedule the rescan again. So cancel any rescan
5215 * that is not done yet.
5216 */
5217 cancel_delayed_work_sync(&ap->scsi_rescan_task);
5218
5219 /*
5220 * On some hardware, device fails to respond after spun down for
5221 * suspend. As the device will not be used until being resumed, we
5222 * do not need to touch the device. Ask EH to skip the usual stuff
5223 * and proceed directly to suspend.
5224 *
5225 * http://thread.gmane.org/gmane.linux.ide/46764
5226 */
5227 ata_port_request_pm(ap, mesg, 0,
5228 ATA_EHI_QUIET | ATA_EHI_NO_AUTOPSY |
5229 ATA_EHI_NO_RECOVERY,
5230 async);
5231}
5232
5233static int ata_port_pm_suspend(struct device *dev)
5234{
5235 struct ata_port *ap = to_ata_port(dev);
5236
5237 if (pm_runtime_suspended(dev))
5238 return 0;
5239
5240 ata_port_suspend(ap, PMSG_SUSPEND, false);
5241 return 0;
5242}
5243
5244static int ata_port_pm_freeze(struct device *dev)
5245{
5246 struct ata_port *ap = to_ata_port(dev);
5247
5248 if (pm_runtime_suspended(dev))
5249 return 0;
5250
5251 ata_port_suspend(ap, PMSG_FREEZE, false);
5252 return 0;
5253}
5254
5255static int ata_port_pm_poweroff(struct device *dev)
5256{
5257 if (!pm_runtime_suspended(dev))
5258 ata_port_suspend(to_ata_port(dev), PMSG_HIBERNATE, false);
5259 return 0;
5260}
5261
5262static void ata_port_resume(struct ata_port *ap, pm_message_t mesg,
5263 bool async)
5264{
5265 ata_port_request_pm(ap, mesg, ATA_EH_RESET,
5266 ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET,
5267 async);
5268}
5269
5270static int ata_port_pm_resume(struct device *dev)
5271{
5272 if (!pm_runtime_suspended(dev))
5273 ata_port_resume(to_ata_port(dev), PMSG_RESUME, true);
5274 return 0;
5275}
5276
5277/*
5278 * For ODDs, the upper layer will poll for media change every few seconds,
5279 * which will make it enter and leave suspend state every few seconds. And
5280 * as each suspend will cause a hard/soft reset, the gain of runtime suspend
5281 * is very little and the ODD may malfunction after constantly being reset.
5282 * So the idle callback here will not proceed to suspend if a non-ZPODD capable
5283 * ODD is attached to the port.
5284 */
5285static int ata_port_runtime_idle(struct device *dev)
5286{
5287 struct ata_port *ap = to_ata_port(dev);
5288 struct ata_link *link;
5289 struct ata_device *adev;
5290
5291 ata_for_each_link(link, ap, HOST_FIRST) {
5292 ata_for_each_dev(adev, link, ENABLED)
5293 if (adev->class == ATA_DEV_ATAPI &&
5294 !zpodd_dev_enabled(adev))
5295 return -EBUSY;
5296 }
5297
5298 return 0;
5299}
5300
5301static int ata_port_runtime_suspend(struct device *dev)
5302{
5303 ata_port_suspend(to_ata_port(dev), PMSG_AUTO_SUSPEND, false);
5304 return 0;
5305}
5306
5307static int ata_port_runtime_resume(struct device *dev)
5308{
5309 ata_port_resume(to_ata_port(dev), PMSG_AUTO_RESUME, false);
5310 return 0;
5311}
5312
5313static const struct dev_pm_ops ata_port_pm_ops = {
5314 .suspend = ata_port_pm_suspend,
5315 .resume = ata_port_pm_resume,
5316 .freeze = ata_port_pm_freeze,
5317 .thaw = ata_port_pm_resume,
5318 .poweroff = ata_port_pm_poweroff,
5319 .restore = ata_port_pm_resume,
5320
5321 .runtime_suspend = ata_port_runtime_suspend,
5322 .runtime_resume = ata_port_runtime_resume,
5323 .runtime_idle = ata_port_runtime_idle,
5324};
5325
5326/* sas ports don't participate in pm runtime management of ata_ports,
5327 * and need to resume ata devices at the domain level, not the per-port
5328 * level. sas suspend/resume is async to allow parallel port recovery
5329 * since sas has multiple ata_port instances per Scsi_Host.
5330 */
5331void ata_sas_port_suspend(struct ata_port *ap)
5332{
5333 ata_port_suspend(ap, PMSG_SUSPEND, true);
5334}
5335EXPORT_SYMBOL_GPL(ata_sas_port_suspend);
5336
5337void ata_sas_port_resume(struct ata_port *ap)
5338{
5339 ata_port_resume(ap, PMSG_RESUME, true);
5340}
5341EXPORT_SYMBOL_GPL(ata_sas_port_resume);
5342
5343/**
5344 * ata_host_suspend - suspend host
5345 * @host: host to suspend
5346 * @mesg: PM message
5347 *
5348 * Suspend @host. Actual operation is performed by port suspend.
5349 */
5350void ata_host_suspend(struct ata_host *host, pm_message_t mesg)
5351{
5352 host->dev->power.power_state = mesg;
5353}
5354EXPORT_SYMBOL_GPL(ata_host_suspend);
5355
5356/**
5357 * ata_host_resume - resume host
5358 * @host: host to resume
5359 *
5360 * Resume @host. Actual operation is performed by port resume.
5361 */
5362void ata_host_resume(struct ata_host *host)
5363{
5364 host->dev->power.power_state = PMSG_ON;
5365}
5366EXPORT_SYMBOL_GPL(ata_host_resume);
5367#endif
5368
5369const struct device_type ata_port_type = {
5370 .name = ATA_PORT_TYPE_NAME,
5371#ifdef CONFIG_PM
5372 .pm = &ata_port_pm_ops,
5373#endif
5374};
5375
5376/**
5377 * ata_dev_init - Initialize an ata_device structure
5378 * @dev: Device structure to initialize
5379 *
5380 * Initialize @dev in preparation for probing.
5381 *
5382 * LOCKING:
5383 * Inherited from caller.
5384 */
5385void ata_dev_init(struct ata_device *dev)
5386{
5387 struct ata_link *link = ata_dev_phys_link(dev);
5388 struct ata_port *ap = link->ap;
5389 unsigned long flags;
5390
5391 /* SATA spd limit is bound to the attached device, reset together */
5392 link->sata_spd_limit = link->hw_sata_spd_limit;
5393 link->sata_spd = 0;
5394
5395 /* High bits of dev->flags are used to record warm plug
5396 * requests which occur asynchronously. Synchronize using
5397 * host lock.
5398 */
5399 spin_lock_irqsave(ap->lock, flags);
5400 dev->flags &= ~ATA_DFLAG_INIT_MASK;
5401 dev->horkage = 0;
5402 spin_unlock_irqrestore(ap->lock, flags);
5403
5404 memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0,
5405 ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN);
5406 dev->pio_mask = UINT_MAX;
5407 dev->mwdma_mask = UINT_MAX;
5408 dev->udma_mask = UINT_MAX;
5409}
5410
5411/**
5412 * ata_link_init - Initialize an ata_link structure
5413 * @ap: ATA port link is attached to
5414 * @link: Link structure to initialize
5415 * @pmp: Port multiplier port number
5416 *
5417 * Initialize @link.
5418 *
5419 * LOCKING:
5420 * Kernel thread context (may sleep)
5421 */
5422void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
5423{
5424 int i;
5425
5426 /* clear everything except for devices */
5427 memset((void *)link + ATA_LINK_CLEAR_BEGIN, 0,
5428 ATA_LINK_CLEAR_END - ATA_LINK_CLEAR_BEGIN);
5429
5430 link->ap = ap;
5431 link->pmp = pmp;
5432 link->active_tag = ATA_TAG_POISON;
5433 link->hw_sata_spd_limit = UINT_MAX;
5434
5435 /* can't use iterator, ap isn't initialized yet */
5436 for (i = 0; i < ATA_MAX_DEVICES; i++) {
5437 struct ata_device *dev = &link->device[i];
5438
5439 dev->link = link;
5440 dev->devno = dev - link->device;
5441#ifdef CONFIG_ATA_ACPI
5442 dev->gtf_filter = ata_acpi_gtf_filter;
5443#endif
5444 ata_dev_init(dev);
5445 }
5446}
5447
5448/**
5449 * sata_link_init_spd - Initialize link->sata_spd_limit
5450 * @link: Link to configure sata_spd_limit for
5451 *
5452 * Initialize ``link->[hw_]sata_spd_limit`` to the currently
5453 * configured value.
5454 *
5455 * LOCKING:
5456 * Kernel thread context (may sleep).
5457 *
5458 * RETURNS:
5459 * 0 on success, -errno on failure.
5460 */
5461int sata_link_init_spd(struct ata_link *link)
5462{
5463 u8 spd;
5464 int rc;
5465
5466 rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
5467 if (rc)
5468 return rc;
5469
5470 spd = (link->saved_scontrol >> 4) & 0xf;
5471 if (spd)
5472 link->hw_sata_spd_limit &= (1 << spd) - 1;
5473
5474 ata_force_link_limits(link);
5475
5476 link->sata_spd_limit = link->hw_sata_spd_limit;
5477
5478 return 0;
5479}
5480
5481/**
5482 * ata_port_alloc - allocate and initialize basic ATA port resources
5483 * @host: ATA host this allocated port belongs to
5484 *
5485 * Allocate and initialize basic ATA port resources.
5486 *
5487 * RETURNS:
5488 * Allocate ATA port on success, NULL on failure.
5489 *
5490 * LOCKING:
5491 * Inherited from calling layer (may sleep).
5492 */
5493struct ata_port *ata_port_alloc(struct ata_host *host)
5494{
5495 struct ata_port *ap;
5496
5497 ap = kzalloc(sizeof(*ap), GFP_KERNEL);
5498 if (!ap)
5499 return NULL;
5500
5501 ap->pflags |= ATA_PFLAG_INITIALIZING | ATA_PFLAG_FROZEN;
5502 ap->lock = &host->lock;
5503 ap->print_id = -1;
5504 ap->local_port_no = -1;
5505 ap->host = host;
5506 ap->dev = host->dev;
5507
5508 mutex_init(&ap->scsi_scan_mutex);
5509 INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
5510 INIT_DELAYED_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
5511 INIT_LIST_HEAD(&ap->eh_done_q);
5512 init_waitqueue_head(&ap->eh_wait_q);
5513 init_completion(&ap->park_req_pending);
5514 timer_setup(&ap->fastdrain_timer, ata_eh_fastdrain_timerfn,
5515 TIMER_DEFERRABLE);
5516
5517 ap->cbl = ATA_CBL_NONE;
5518
5519 ata_link_init(ap, &ap->link, 0);
5520
5521#ifdef ATA_IRQ_TRAP
5522 ap->stats.unhandled_irq = 1;
5523 ap->stats.idle_irq = 1;
5524#endif
5525 ata_sff_port_init(ap);
5526
5527 return ap;
5528}
5529
5530static void ata_devres_release(struct device *gendev, void *res)
5531{
5532 struct ata_host *host = dev_get_drvdata(gendev);
5533 int i;
5534
5535 for (i = 0; i < host->n_ports; i++) {
5536 struct ata_port *ap = host->ports[i];
5537
5538 if (!ap)
5539 continue;
5540
5541 if (ap->scsi_host)
5542 scsi_host_put(ap->scsi_host);
5543
5544 }
5545
5546 dev_set_drvdata(gendev, NULL);
5547 ata_host_put(host);
5548}
5549
5550static void ata_host_release(struct kref *kref)
5551{
5552 struct ata_host *host = container_of(kref, struct ata_host, kref);
5553 int i;
5554
5555 for (i = 0; i < host->n_ports; i++) {
5556 struct ata_port *ap = host->ports[i];
5557
5558 kfree(ap->pmp_link);
5559 kfree(ap->slave_link);
5560 kfree(ap->ncq_sense_buf);
5561 kfree(ap);
5562 host->ports[i] = NULL;
5563 }
5564 kfree(host);
5565}
5566
5567void ata_host_get(struct ata_host *host)
5568{
5569 kref_get(&host->kref);
5570}
5571
5572void ata_host_put(struct ata_host *host)
5573{
5574 kref_put(&host->kref, ata_host_release);
5575}
5576EXPORT_SYMBOL_GPL(ata_host_put);
5577
5578/**
5579 * ata_host_alloc - allocate and init basic ATA host resources
5580 * @dev: generic device this host is associated with
5581 * @max_ports: maximum number of ATA ports associated with this host
5582 *
5583 * Allocate and initialize basic ATA host resources. LLD calls
5584 * this function to allocate a host, initializes it fully and
5585 * attaches it using ata_host_register().
5586 *
5587 * @max_ports ports are allocated and host->n_ports is
5588 * initialized to @max_ports. The caller is allowed to decrease
5589 * host->n_ports before calling ata_host_register(). The unused
5590 * ports will be automatically freed on registration.
5591 *
5592 * RETURNS:
5593 * Allocate ATA host on success, NULL on failure.
5594 *
5595 * LOCKING:
5596 * Inherited from calling layer (may sleep).
5597 */
5598struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
5599{
5600 struct ata_host *host;
5601 size_t sz;
5602 int i;
5603 void *dr;
5604
5605 /* alloc a container for our list of ATA ports (buses) */
5606 sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *);
5607 host = kzalloc(sz, GFP_KERNEL);
5608 if (!host)
5609 return NULL;
5610
5611 if (!devres_open_group(dev, NULL, GFP_KERNEL))
5612 goto err_free;
5613
5614 dr = devres_alloc(ata_devres_release, 0, GFP_KERNEL);
5615 if (!dr)
5616 goto err_out;
5617
5618 devres_add(dev, dr);
5619 dev_set_drvdata(dev, host);
5620
5621 spin_lock_init(&host->lock);
5622 mutex_init(&host->eh_mutex);
5623 host->dev = dev;
5624 host->n_ports = max_ports;
5625 kref_init(&host->kref);
5626
5627 /* allocate ports bound to this host */
5628 for (i = 0; i < max_ports; i++) {
5629 struct ata_port *ap;
5630
5631 ap = ata_port_alloc(host);
5632 if (!ap)
5633 goto err_out;
5634
5635 ap->port_no = i;
5636 host->ports[i] = ap;
5637 }
5638
5639 devres_remove_group(dev, NULL);
5640 return host;
5641
5642 err_out:
5643 devres_release_group(dev, NULL);
5644 err_free:
5645 kfree(host);
5646 return NULL;
5647}
5648EXPORT_SYMBOL_GPL(ata_host_alloc);
5649
5650/**
5651 * ata_host_alloc_pinfo - alloc host and init with port_info array
5652 * @dev: generic device this host is associated with
5653 * @ppi: array of ATA port_info to initialize host with
5654 * @n_ports: number of ATA ports attached to this host
5655 *
5656 * Allocate ATA host and initialize with info from @ppi. If NULL
5657 * terminated, @ppi may contain fewer entries than @n_ports. The
5658 * last entry will be used for the remaining ports.
5659 *
5660 * RETURNS:
5661 * Allocate ATA host on success, NULL on failure.
5662 *
5663 * LOCKING:
5664 * Inherited from calling layer (may sleep).
5665 */
5666struct ata_host *ata_host_alloc_pinfo(struct device *dev,
5667 const struct ata_port_info * const * ppi,
5668 int n_ports)
5669{
5670 const struct ata_port_info *pi = &ata_dummy_port_info;
5671 struct ata_host *host;
5672 int i, j;
5673
5674 host = ata_host_alloc(dev, n_ports);
5675 if (!host)
5676 return NULL;
5677
5678 for (i = 0, j = 0; i < host->n_ports; i++) {
5679 struct ata_port *ap = host->ports[i];
5680
5681 if (ppi[j])
5682 pi = ppi[j++];
5683
5684 ap->pio_mask = pi->pio_mask;
5685 ap->mwdma_mask = pi->mwdma_mask;
5686 ap->udma_mask = pi->udma_mask;
5687 ap->flags |= pi->flags;
5688 ap->link.flags |= pi->link_flags;
5689 ap->ops = pi->port_ops;
5690
5691 if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
5692 host->ops = pi->port_ops;
5693 }
5694
5695 return host;
5696}
5697EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
5698
5699static void ata_host_stop(struct device *gendev, void *res)
5700{
5701 struct ata_host *host = dev_get_drvdata(gendev);
5702 int i;
5703
5704 WARN_ON(!(host->flags & ATA_HOST_STARTED));
5705
5706 for (i = 0; i < host->n_ports; i++) {
5707 struct ata_port *ap = host->ports[i];
5708
5709 if (ap->ops->port_stop)
5710 ap->ops->port_stop(ap);
5711 }
5712
5713 if (host->ops->host_stop)
5714 host->ops->host_stop(host);
5715}
5716
5717/**
5718 * ata_finalize_port_ops - finalize ata_port_operations
5719 * @ops: ata_port_operations to finalize
5720 *
5721 * An ata_port_operations can inherit from another ops and that
5722 * ops can again inherit from another. This can go on as many
5723 * times as necessary as long as there is no loop in the
5724 * inheritance chain.
5725 *
5726 * Ops tables are finalized when the host is started. NULL or
5727 * unspecified entries are inherited from the closet ancestor
5728 * which has the method and the entry is populated with it.
5729 * After finalization, the ops table directly points to all the
5730 * methods and ->inherits is no longer necessary and cleared.
5731 *
5732 * Using ATA_OP_NULL, inheriting ops can force a method to NULL.
5733 *
5734 * LOCKING:
5735 * None.
5736 */
5737static void ata_finalize_port_ops(struct ata_port_operations *ops)
5738{
5739 static DEFINE_SPINLOCK(lock);
5740 const struct ata_port_operations *cur;
5741 void **begin = (void **)ops;
5742 void **end = (void **)&ops->inherits;
5743 void **pp;
5744
5745 if (!ops || !ops->inherits)
5746 return;
5747
5748 spin_lock(&lock);
5749
5750 for (cur = ops->inherits; cur; cur = cur->inherits) {
5751 void **inherit = (void **)cur;
5752
5753 for (pp = begin; pp < end; pp++, inherit++)
5754 if (!*pp)
5755 *pp = *inherit;
5756 }
5757
5758 for (pp = begin; pp < end; pp++)
5759 if (IS_ERR(*pp))
5760 *pp = NULL;
5761
5762 ops->inherits = NULL;
5763
5764 spin_unlock(&lock);
5765}
5766
5767/**
5768 * ata_host_start - start and freeze ports of an ATA host
5769 * @host: ATA host to start ports for
5770 *
5771 * Start and then freeze ports of @host. Started status is
5772 * recorded in host->flags, so this function can be called
5773 * multiple times. Ports are guaranteed to get started only
5774 * once. If host->ops is not initialized yet, it is set to the
5775 * first non-dummy port ops.
5776 *
5777 * LOCKING:
5778 * Inherited from calling layer (may sleep).
5779 *
5780 * RETURNS:
5781 * 0 if all ports are started successfully, -errno otherwise.
5782 */
5783int ata_host_start(struct ata_host *host)
5784{
5785 int have_stop = 0;
5786 void *start_dr = NULL;
5787 int i, rc;
5788
5789 if (host->flags & ATA_HOST_STARTED)
5790 return 0;
5791
5792 ata_finalize_port_ops(host->ops);
5793
5794 for (i = 0; i < host->n_ports; i++) {
5795 struct ata_port *ap = host->ports[i];
5796
5797 ata_finalize_port_ops(ap->ops);
5798
5799 if (!host->ops && !ata_port_is_dummy(ap))
5800 host->ops = ap->ops;
5801
5802 if (ap->ops->port_stop)
5803 have_stop = 1;
5804 }
5805
5806 if (host->ops && host->ops->host_stop)
5807 have_stop = 1;
5808
5809 if (have_stop) {
5810 start_dr = devres_alloc(ata_host_stop, 0, GFP_KERNEL);
5811 if (!start_dr)
5812 return -ENOMEM;
5813 }
5814
5815 for (i = 0; i < host->n_ports; i++) {
5816 struct ata_port *ap = host->ports[i];
5817
5818 if (ap->ops->port_start) {
5819 rc = ap->ops->port_start(ap);
5820 if (rc) {
5821 if (rc != -ENODEV)
5822 dev_err(host->dev,
5823 "failed to start port %d (errno=%d)\n",
5824 i, rc);
5825 goto err_out;
5826 }
5827 }
5828 ata_eh_freeze_port(ap);
5829 }
5830
5831 if (start_dr)
5832 devres_add(host->dev, start_dr);
5833 host->flags |= ATA_HOST_STARTED;
5834 return 0;
5835
5836 err_out:
5837 while (--i >= 0) {
5838 struct ata_port *ap = host->ports[i];
5839
5840 if (ap->ops->port_stop)
5841 ap->ops->port_stop(ap);
5842 }
5843 devres_free(start_dr);
5844 return rc;
5845}
5846EXPORT_SYMBOL_GPL(ata_host_start);
5847
5848/**
5849 * ata_host_init - Initialize a host struct for sas (ipr, libsas)
5850 * @host: host to initialize
5851 * @dev: device host is attached to
5852 * @ops: port_ops
5853 *
5854 */
5855void ata_host_init(struct ata_host *host, struct device *dev,
5856 struct ata_port_operations *ops)
5857{
5858 spin_lock_init(&host->lock);
5859 mutex_init(&host->eh_mutex);
5860 host->n_tags = ATA_MAX_QUEUE;
5861 host->dev = dev;
5862 host->ops = ops;
5863 kref_init(&host->kref);
5864}
5865EXPORT_SYMBOL_GPL(ata_host_init);
5866
5867void ata_port_probe(struct ata_port *ap)
5868{
5869 struct ata_eh_info *ehi = &ap->link.eh_info;
5870 unsigned long flags;
5871
5872 /* kick EH for boot probing */
5873 spin_lock_irqsave(ap->lock, flags);
5874
5875 ehi->probe_mask |= ATA_ALL_DEVICES;
5876 ehi->action |= ATA_EH_RESET;
5877 ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
5878
5879 ap->pflags &= ~ATA_PFLAG_INITIALIZING;
5880 ap->pflags |= ATA_PFLAG_LOADING;
5881 ata_port_schedule_eh(ap);
5882
5883 spin_unlock_irqrestore(ap->lock, flags);
5884}
5885EXPORT_SYMBOL_GPL(ata_port_probe);
5886
5887static void async_port_probe(void *data, async_cookie_t cookie)
5888{
5889 struct ata_port *ap = data;
5890
5891 /*
5892 * If we're not allowed to scan this host in parallel,
5893 * we need to wait until all previous scans have completed
5894 * before going further.
5895 * Jeff Garzik says this is only within a controller, so we
5896 * don't need to wait for port 0, only for later ports.
5897 */
5898 if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0)
5899 async_synchronize_cookie(cookie);
5900
5901 ata_port_probe(ap);
5902 ata_port_wait_eh(ap);
5903
5904 /* in order to keep device order, we need to synchronize at this point */
5905 async_synchronize_cookie(cookie);
5906
5907 ata_scsi_scan_host(ap, 1);
5908}
5909
5910/**
5911 * ata_host_register - register initialized ATA host
5912 * @host: ATA host to register
5913 * @sht: template for SCSI host
5914 *
5915 * Register initialized ATA host. @host is allocated using
5916 * ata_host_alloc() and fully initialized by LLD. This function
5917 * starts ports, registers @host with ATA and SCSI layers and
5918 * probe registered devices.
5919 *
5920 * LOCKING:
5921 * Inherited from calling layer (may sleep).
5922 *
5923 * RETURNS:
5924 * 0 on success, -errno otherwise.
5925 */
5926int ata_host_register(struct ata_host *host, const struct scsi_host_template *sht)
5927{
5928 int i, rc;
5929
5930 host->n_tags = clamp(sht->can_queue, 1, ATA_MAX_QUEUE);
5931
5932 /* host must have been started */
5933 if (!(host->flags & ATA_HOST_STARTED)) {
5934 dev_err(host->dev, "BUG: trying to register unstarted host\n");
5935 WARN_ON(1);
5936 return -EINVAL;
5937 }
5938
5939 /* Blow away unused ports. This happens when LLD can't
5940 * determine the exact number of ports to allocate at
5941 * allocation time.
5942 */
5943 for (i = host->n_ports; host->ports[i]; i++)
5944 kfree(host->ports[i]);
5945
5946 /* give ports names and add SCSI hosts */
5947 for (i = 0; i < host->n_ports; i++) {
5948 host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
5949 host->ports[i]->local_port_no = i + 1;
5950 }
5951
5952 /* Create associated sysfs transport objects */
5953 for (i = 0; i < host->n_ports; i++) {
5954 rc = ata_tport_add(host->dev,host->ports[i]);
5955 if (rc) {
5956 goto err_tadd;
5957 }
5958 }
5959
5960 rc = ata_scsi_add_hosts(host, sht);
5961 if (rc)
5962 goto err_tadd;
5963
5964 /* set cable, sata_spd_limit and report */
5965 for (i = 0; i < host->n_ports; i++) {
5966 struct ata_port *ap = host->ports[i];
5967 unsigned int xfer_mask;
5968
5969 /* set SATA cable type if still unset */
5970 if (ap->cbl == ATA_CBL_NONE && (ap->flags & ATA_FLAG_SATA))
5971 ap->cbl = ATA_CBL_SATA;
5972
5973 /* init sata_spd_limit to the current value */
5974 sata_link_init_spd(&ap->link);
5975 if (ap->slave_link)
5976 sata_link_init_spd(ap->slave_link);
5977
5978 /* print per-port info to dmesg */
5979 xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
5980 ap->udma_mask);
5981
5982 if (!ata_port_is_dummy(ap)) {
5983 ata_port_info(ap, "%cATA max %s %s\n",
5984 (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P',
5985 ata_mode_string(xfer_mask),
5986 ap->link.eh_info.desc);
5987 ata_ehi_clear_desc(&ap->link.eh_info);
5988 } else
5989 ata_port_info(ap, "DUMMY\n");
5990 }
5991
5992 /* perform each probe asynchronously */
5993 for (i = 0; i < host->n_ports; i++) {
5994 struct ata_port *ap = host->ports[i];
5995 ap->cookie = async_schedule(async_port_probe, ap);
5996 }
5997
5998 return 0;
5999
6000 err_tadd:
6001 while (--i >= 0) {
6002 ata_tport_delete(host->ports[i]);
6003 }
6004 return rc;
6005
6006}
6007EXPORT_SYMBOL_GPL(ata_host_register);
6008
6009/**
6010 * ata_host_activate - start host, request IRQ and register it
6011 * @host: target ATA host
6012 * @irq: IRQ to request
6013 * @irq_handler: irq_handler used when requesting IRQ
6014 * @irq_flags: irq_flags used when requesting IRQ
6015 * @sht: scsi_host_template to use when registering the host
6016 *
6017 * After allocating an ATA host and initializing it, most libata
6018 * LLDs perform three steps to activate the host - start host,
6019 * request IRQ and register it. This helper takes necessary
6020 * arguments and performs the three steps in one go.
6021 *
6022 * An invalid IRQ skips the IRQ registration and expects the host to
6023 * have set polling mode on the port. In this case, @irq_handler
6024 * should be NULL.
6025 *
6026 * LOCKING:
6027 * Inherited from calling layer (may sleep).
6028 *
6029 * RETURNS:
6030 * 0 on success, -errno otherwise.
6031 */
6032int ata_host_activate(struct ata_host *host, int irq,
6033 irq_handler_t irq_handler, unsigned long irq_flags,
6034 const struct scsi_host_template *sht)
6035{
6036 int i, rc;
6037 char *irq_desc;
6038
6039 rc = ata_host_start(host);
6040 if (rc)
6041 return rc;
6042
6043 /* Special case for polling mode */
6044 if (!irq) {
6045 WARN_ON(irq_handler);
6046 return ata_host_register(host, sht);
6047 }
6048
6049 irq_desc = devm_kasprintf(host->dev, GFP_KERNEL, "%s[%s]",
6050 dev_driver_string(host->dev),
6051 dev_name(host->dev));
6052 if (!irq_desc)
6053 return -ENOMEM;
6054
6055 rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags,
6056 irq_desc, host);
6057 if (rc)
6058 return rc;
6059
6060 for (i = 0; i < host->n_ports; i++)
6061 ata_port_desc_misc(host->ports[i], irq);
6062
6063 rc = ata_host_register(host, sht);
6064 /* if failed, just free the IRQ and leave ports alone */
6065 if (rc)
6066 devm_free_irq(host->dev, irq, host);
6067
6068 return rc;
6069}
6070EXPORT_SYMBOL_GPL(ata_host_activate);
6071
6072/**
6073 * ata_port_detach - Detach ATA port in preparation of device removal
6074 * @ap: ATA port to be detached
6075 *
6076 * Detach all ATA devices and the associated SCSI devices of @ap;
6077 * then, remove the associated SCSI host. @ap is guaranteed to
6078 * be quiescent on return from this function.
6079 *
6080 * LOCKING:
6081 * Kernel thread context (may sleep).
6082 */
6083static void ata_port_detach(struct ata_port *ap)
6084{
6085 unsigned long flags;
6086 struct ata_link *link;
6087 struct ata_device *dev;
6088
6089 /* Ensure ata_port probe has completed */
6090 async_synchronize_cookie(ap->cookie + 1);
6091
6092 /* Wait for any ongoing EH */
6093 ata_port_wait_eh(ap);
6094
6095 mutex_lock(&ap->scsi_scan_mutex);
6096 spin_lock_irqsave(ap->lock, flags);
6097
6098 /* Remove scsi devices */
6099 ata_for_each_link(link, ap, HOST_FIRST) {
6100 ata_for_each_dev(dev, link, ALL) {
6101 if (dev->sdev) {
6102 spin_unlock_irqrestore(ap->lock, flags);
6103 scsi_remove_device(dev->sdev);
6104 spin_lock_irqsave(ap->lock, flags);
6105 dev->sdev = NULL;
6106 }
6107 }
6108 }
6109
6110 /* Tell EH to disable all devices */
6111 ap->pflags |= ATA_PFLAG_UNLOADING;
6112 ata_port_schedule_eh(ap);
6113
6114 spin_unlock_irqrestore(ap->lock, flags);
6115 mutex_unlock(&ap->scsi_scan_mutex);
6116
6117 /* wait till EH commits suicide */
6118 ata_port_wait_eh(ap);
6119
6120 /* it better be dead now */
6121 WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED));
6122
6123 cancel_delayed_work_sync(&ap->hotplug_task);
6124 cancel_delayed_work_sync(&ap->scsi_rescan_task);
6125
6126 /* clean up zpodd on port removal */
6127 ata_for_each_link(link, ap, HOST_FIRST) {
6128 ata_for_each_dev(dev, link, ALL) {
6129 if (zpodd_dev_enabled(dev))
6130 zpodd_exit(dev);
6131 }
6132 }
6133 if (ap->pmp_link) {
6134 int i;
6135 for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
6136 ata_tlink_delete(&ap->pmp_link[i]);
6137 }
6138 /* remove the associated SCSI host */
6139 scsi_remove_host(ap->scsi_host);
6140 ata_tport_delete(ap);
6141}
6142
6143/**
6144 * ata_host_detach - Detach all ports of an ATA host
6145 * @host: Host to detach
6146 *
6147 * Detach all ports of @host.
6148 *
6149 * LOCKING:
6150 * Kernel thread context (may sleep).
6151 */
6152void ata_host_detach(struct ata_host *host)
6153{
6154 int i;
6155
6156 for (i = 0; i < host->n_ports; i++)
6157 ata_port_detach(host->ports[i]);
6158
6159 /* the host is dead now, dissociate ACPI */
6160 ata_acpi_dissociate(host);
6161}
6162EXPORT_SYMBOL_GPL(ata_host_detach);
6163
6164#ifdef CONFIG_PCI
6165
6166/**
6167 * ata_pci_remove_one - PCI layer callback for device removal
6168 * @pdev: PCI device that was removed
6169 *
6170 * PCI layer indicates to libata via this hook that hot-unplug or
6171 * module unload event has occurred. Detach all ports. Resource
6172 * release is handled via devres.
6173 *
6174 * LOCKING:
6175 * Inherited from PCI layer (may sleep).
6176 */
6177void ata_pci_remove_one(struct pci_dev *pdev)
6178{
6179 struct ata_host *host = pci_get_drvdata(pdev);
6180
6181 ata_host_detach(host);
6182}
6183EXPORT_SYMBOL_GPL(ata_pci_remove_one);
6184
6185void ata_pci_shutdown_one(struct pci_dev *pdev)
6186{
6187 struct ata_host *host = pci_get_drvdata(pdev);
6188 int i;
6189
6190 for (i = 0; i < host->n_ports; i++) {
6191 struct ata_port *ap = host->ports[i];
6192
6193 ap->pflags |= ATA_PFLAG_FROZEN;
6194
6195 /* Disable port interrupts */
6196 if (ap->ops->freeze)
6197 ap->ops->freeze(ap);
6198
6199 /* Stop the port DMA engines */
6200 if (ap->ops->port_stop)
6201 ap->ops->port_stop(ap);
6202 }
6203}
6204EXPORT_SYMBOL_GPL(ata_pci_shutdown_one);
6205
6206/* move to PCI subsystem */
6207int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
6208{
6209 unsigned long tmp = 0;
6210
6211 switch (bits->width) {
6212 case 1: {
6213 u8 tmp8 = 0;
6214 pci_read_config_byte(pdev, bits->reg, &tmp8);
6215 tmp = tmp8;
6216 break;
6217 }
6218 case 2: {
6219 u16 tmp16 = 0;
6220 pci_read_config_word(pdev, bits->reg, &tmp16);
6221 tmp = tmp16;
6222 break;
6223 }
6224 case 4: {
6225 u32 tmp32 = 0;
6226 pci_read_config_dword(pdev, bits->reg, &tmp32);
6227 tmp = tmp32;
6228 break;
6229 }
6230
6231 default:
6232 return -EINVAL;
6233 }
6234
6235 tmp &= bits->mask;
6236
6237 return (tmp == bits->val) ? 1 : 0;
6238}
6239EXPORT_SYMBOL_GPL(pci_test_config_bits);
6240
6241#ifdef CONFIG_PM
6242void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
6243{
6244 pci_save_state(pdev);
6245 pci_disable_device(pdev);
6246
6247 if (mesg.event & PM_EVENT_SLEEP)
6248 pci_set_power_state(pdev, PCI_D3hot);
6249}
6250EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
6251
6252int ata_pci_device_do_resume(struct pci_dev *pdev)
6253{
6254 int rc;
6255
6256 pci_set_power_state(pdev, PCI_D0);
6257 pci_restore_state(pdev);
6258
6259 rc = pcim_enable_device(pdev);
6260 if (rc) {
6261 dev_err(&pdev->dev,
6262 "failed to enable device after resume (%d)\n", rc);
6263 return rc;
6264 }
6265
6266 pci_set_master(pdev);
6267 return 0;
6268}
6269EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
6270
6271int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
6272{
6273 struct ata_host *host = pci_get_drvdata(pdev);
6274
6275 ata_host_suspend(host, mesg);
6276
6277 ata_pci_device_do_suspend(pdev, mesg);
6278
6279 return 0;
6280}
6281EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
6282
6283int ata_pci_device_resume(struct pci_dev *pdev)
6284{
6285 struct ata_host *host = pci_get_drvdata(pdev);
6286 int rc;
6287
6288 rc = ata_pci_device_do_resume(pdev);
6289 if (rc == 0)
6290 ata_host_resume(host);
6291 return rc;
6292}
6293EXPORT_SYMBOL_GPL(ata_pci_device_resume);
6294#endif /* CONFIG_PM */
6295#endif /* CONFIG_PCI */
6296
6297/**
6298 * ata_platform_remove_one - Platform layer callback for device removal
6299 * @pdev: Platform device that was removed
6300 *
6301 * Platform layer indicates to libata via this hook that hot-unplug or
6302 * module unload event has occurred. Detach all ports. Resource
6303 * release is handled via devres.
6304 *
6305 * LOCKING:
6306 * Inherited from platform layer (may sleep).
6307 */
6308void ata_platform_remove_one(struct platform_device *pdev)
6309{
6310 struct ata_host *host = platform_get_drvdata(pdev);
6311
6312 ata_host_detach(host);
6313}
6314EXPORT_SYMBOL_GPL(ata_platform_remove_one);
6315
6316#ifdef CONFIG_ATA_FORCE
6317
6318#define force_cbl(name, flag) \
6319 { #name, .cbl = (flag) }
6320
6321#define force_spd_limit(spd, val) \
6322 { #spd, .spd_limit = (val) }
6323
6324#define force_xfer(mode, shift) \
6325 { #mode, .xfer_mask = (1UL << (shift)) }
6326
6327#define force_lflag_on(name, flags) \
6328 { #name, .lflags_on = (flags) }
6329
6330#define force_lflag_onoff(name, flags) \
6331 { "no" #name, .lflags_on = (flags) }, \
6332 { #name, .lflags_off = (flags) }
6333
6334#define force_horkage_on(name, flag) \
6335 { #name, .horkage_on = (flag) }
6336
6337#define force_horkage_onoff(name, flag) \
6338 { "no" #name, .horkage_on = (flag) }, \
6339 { #name, .horkage_off = (flag) }
6340
6341static const struct ata_force_param force_tbl[] __initconst = {
6342 force_cbl(40c, ATA_CBL_PATA40),
6343 force_cbl(80c, ATA_CBL_PATA80),
6344 force_cbl(short40c, ATA_CBL_PATA40_SHORT),
6345 force_cbl(unk, ATA_CBL_PATA_UNK),
6346 force_cbl(ign, ATA_CBL_PATA_IGN),
6347 force_cbl(sata, ATA_CBL_SATA),
6348
6349 force_spd_limit(1.5Gbps, 1),
6350 force_spd_limit(3.0Gbps, 2),
6351
6352 force_xfer(pio0, ATA_SHIFT_PIO + 0),
6353 force_xfer(pio1, ATA_SHIFT_PIO + 1),
6354 force_xfer(pio2, ATA_SHIFT_PIO + 2),
6355 force_xfer(pio3, ATA_SHIFT_PIO + 3),
6356 force_xfer(pio4, ATA_SHIFT_PIO + 4),
6357 force_xfer(pio5, ATA_SHIFT_PIO + 5),
6358 force_xfer(pio6, ATA_SHIFT_PIO + 6),
6359 force_xfer(mwdma0, ATA_SHIFT_MWDMA + 0),
6360 force_xfer(mwdma1, ATA_SHIFT_MWDMA + 1),
6361 force_xfer(mwdma2, ATA_SHIFT_MWDMA + 2),
6362 force_xfer(mwdma3, ATA_SHIFT_MWDMA + 3),
6363 force_xfer(mwdma4, ATA_SHIFT_MWDMA + 4),
6364 force_xfer(udma0, ATA_SHIFT_UDMA + 0),
6365 force_xfer(udma16, ATA_SHIFT_UDMA + 0),
6366 force_xfer(udma/16, ATA_SHIFT_UDMA + 0),
6367 force_xfer(udma1, ATA_SHIFT_UDMA + 1),
6368 force_xfer(udma25, ATA_SHIFT_UDMA + 1),
6369 force_xfer(udma/25, ATA_SHIFT_UDMA + 1),
6370 force_xfer(udma2, ATA_SHIFT_UDMA + 2),
6371 force_xfer(udma33, ATA_SHIFT_UDMA + 2),
6372 force_xfer(udma/33, ATA_SHIFT_UDMA + 2),
6373 force_xfer(udma3, ATA_SHIFT_UDMA + 3),
6374 force_xfer(udma44, ATA_SHIFT_UDMA + 3),
6375 force_xfer(udma/44, ATA_SHIFT_UDMA + 3),
6376 force_xfer(udma4, ATA_SHIFT_UDMA + 4),
6377 force_xfer(udma66, ATA_SHIFT_UDMA + 4),
6378 force_xfer(udma/66, ATA_SHIFT_UDMA + 4),
6379 force_xfer(udma5, ATA_SHIFT_UDMA + 5),
6380 force_xfer(udma100, ATA_SHIFT_UDMA + 5),
6381 force_xfer(udma/100, ATA_SHIFT_UDMA + 5),
6382 force_xfer(udma6, ATA_SHIFT_UDMA + 6),
6383 force_xfer(udma133, ATA_SHIFT_UDMA + 6),
6384 force_xfer(udma/133, ATA_SHIFT_UDMA + 6),
6385 force_xfer(udma7, ATA_SHIFT_UDMA + 7),
6386
6387 force_lflag_on(nohrst, ATA_LFLAG_NO_HRST),
6388 force_lflag_on(nosrst, ATA_LFLAG_NO_SRST),
6389 force_lflag_on(norst, ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST),
6390 force_lflag_on(rstonce, ATA_LFLAG_RST_ONCE),
6391 force_lflag_onoff(dbdelay, ATA_LFLAG_NO_DEBOUNCE_DELAY),
6392
6393 force_horkage_onoff(ncq, ATA_HORKAGE_NONCQ),
6394 force_horkage_onoff(ncqtrim, ATA_HORKAGE_NO_NCQ_TRIM),
6395 force_horkage_onoff(ncqati, ATA_HORKAGE_NO_NCQ_ON_ATI),
6396
6397 force_horkage_onoff(trim, ATA_HORKAGE_NOTRIM),
6398 force_horkage_on(trim_zero, ATA_HORKAGE_ZERO_AFTER_TRIM),
6399 force_horkage_on(max_trim_128m, ATA_HORKAGE_MAX_TRIM_128M),
6400
6401 force_horkage_onoff(dma, ATA_HORKAGE_NODMA),
6402 force_horkage_on(atapi_dmadir, ATA_HORKAGE_ATAPI_DMADIR),
6403 force_horkage_on(atapi_mod16_dma, ATA_HORKAGE_ATAPI_MOD16_DMA),
6404
6405 force_horkage_onoff(dmalog, ATA_HORKAGE_NO_DMA_LOG),
6406 force_horkage_onoff(iddevlog, ATA_HORKAGE_NO_ID_DEV_LOG),
6407 force_horkage_onoff(logdir, ATA_HORKAGE_NO_LOG_DIR),
6408
6409 force_horkage_on(max_sec_128, ATA_HORKAGE_MAX_SEC_128),
6410 force_horkage_on(max_sec_1024, ATA_HORKAGE_MAX_SEC_1024),
6411 force_horkage_on(max_sec_lba48, ATA_HORKAGE_MAX_SEC_LBA48),
6412
6413 force_horkage_onoff(lpm, ATA_HORKAGE_NOLPM),
6414 force_horkage_onoff(setxfer, ATA_HORKAGE_NOSETXFER),
6415 force_horkage_on(dump_id, ATA_HORKAGE_DUMP_ID),
6416 force_horkage_onoff(fua, ATA_HORKAGE_NO_FUA),
6417
6418 force_horkage_on(disable, ATA_HORKAGE_DISABLE),
6419};
6420
6421static int __init ata_parse_force_one(char **cur,
6422 struct ata_force_ent *force_ent,
6423 const char **reason)
6424{
6425 char *start = *cur, *p = *cur;
6426 char *id, *val, *endp;
6427 const struct ata_force_param *match_fp = NULL;
6428 int nr_matches = 0, i;
6429
6430 /* find where this param ends and update *cur */
6431 while (*p != '\0' && *p != ',')
6432 p++;
6433
6434 if (*p == '\0')
6435 *cur = p;
6436 else
6437 *cur = p + 1;
6438
6439 *p = '\0';
6440
6441 /* parse */
6442 p = strchr(start, ':');
6443 if (!p) {
6444 val = strstrip(start);
6445 goto parse_val;
6446 }
6447 *p = '\0';
6448
6449 id = strstrip(start);
6450 val = strstrip(p + 1);
6451
6452 /* parse id */
6453 p = strchr(id, '.');
6454 if (p) {
6455 *p++ = '\0';
6456 force_ent->device = simple_strtoul(p, &endp, 10);
6457 if (p == endp || *endp != '\0') {
6458 *reason = "invalid device";
6459 return -EINVAL;
6460 }
6461 }
6462
6463 force_ent->port = simple_strtoul(id, &endp, 10);
6464 if (id == endp || *endp != '\0') {
6465 *reason = "invalid port/link";
6466 return -EINVAL;
6467 }
6468
6469 parse_val:
6470 /* parse val, allow shortcuts so that both 1.5 and 1.5Gbps work */
6471 for (i = 0; i < ARRAY_SIZE(force_tbl); i++) {
6472 const struct ata_force_param *fp = &force_tbl[i];
6473
6474 if (strncasecmp(val, fp->name, strlen(val)))
6475 continue;
6476
6477 nr_matches++;
6478 match_fp = fp;
6479
6480 if (strcasecmp(val, fp->name) == 0) {
6481 nr_matches = 1;
6482 break;
6483 }
6484 }
6485
6486 if (!nr_matches) {
6487 *reason = "unknown value";
6488 return -EINVAL;
6489 }
6490 if (nr_matches > 1) {
6491 *reason = "ambiguous value";
6492 return -EINVAL;
6493 }
6494
6495 force_ent->param = *match_fp;
6496
6497 return 0;
6498}
6499
6500static void __init ata_parse_force_param(void)
6501{
6502 int idx = 0, size = 1;
6503 int last_port = -1, last_device = -1;
6504 char *p, *cur, *next;
6505
6506 /* Calculate maximum number of params and allocate ata_force_tbl */
6507 for (p = ata_force_param_buf; *p; p++)
6508 if (*p == ',')
6509 size++;
6510
6511 ata_force_tbl = kcalloc(size, sizeof(ata_force_tbl[0]), GFP_KERNEL);
6512 if (!ata_force_tbl) {
6513 printk(KERN_WARNING "ata: failed to extend force table, "
6514 "libata.force ignored\n");
6515 return;
6516 }
6517
6518 /* parse and populate the table */
6519 for (cur = ata_force_param_buf; *cur != '\0'; cur = next) {
6520 const char *reason = "";
6521 struct ata_force_ent te = { .port = -1, .device = -1 };
6522
6523 next = cur;
6524 if (ata_parse_force_one(&next, &te, &reason)) {
6525 printk(KERN_WARNING "ata: failed to parse force "
6526 "parameter \"%s\" (%s)\n",
6527 cur, reason);
6528 continue;
6529 }
6530
6531 if (te.port == -1) {
6532 te.port = last_port;
6533 te.device = last_device;
6534 }
6535
6536 ata_force_tbl[idx++] = te;
6537
6538 last_port = te.port;
6539 last_device = te.device;
6540 }
6541
6542 ata_force_tbl_size = idx;
6543}
6544
6545static void ata_free_force_param(void)
6546{
6547 kfree(ata_force_tbl);
6548}
6549#else
6550static inline void ata_parse_force_param(void) { }
6551static inline void ata_free_force_param(void) { }
6552#endif
6553
6554static int __init ata_init(void)
6555{
6556 int rc;
6557
6558 ata_parse_force_param();
6559
6560 rc = ata_sff_init();
6561 if (rc) {
6562 ata_free_force_param();
6563 return rc;
6564 }
6565
6566 libata_transport_init();
6567 ata_scsi_transport_template = ata_attach_transport();
6568 if (!ata_scsi_transport_template) {
6569 ata_sff_exit();
6570 rc = -ENOMEM;
6571 goto err_out;
6572 }
6573
6574 printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
6575 return 0;
6576
6577err_out:
6578 return rc;
6579}
6580
6581static void __exit ata_exit(void)
6582{
6583 ata_release_transport(ata_scsi_transport_template);
6584 libata_transport_exit();
6585 ata_sff_exit();
6586 ata_free_force_param();
6587}
6588
6589subsys_initcall(ata_init);
6590module_exit(ata_exit);
6591
6592static DEFINE_RATELIMIT_STATE(ratelimit, HZ / 5, 1);
6593
6594int ata_ratelimit(void)
6595{
6596 return __ratelimit(&ratelimit);
6597}
6598EXPORT_SYMBOL_GPL(ata_ratelimit);
6599
6600/**
6601 * ata_msleep - ATA EH owner aware msleep
6602 * @ap: ATA port to attribute the sleep to
6603 * @msecs: duration to sleep in milliseconds
6604 *
6605 * Sleeps @msecs. If the current task is owner of @ap's EH, the
6606 * ownership is released before going to sleep and reacquired
6607 * after the sleep is complete. IOW, other ports sharing the
6608 * @ap->host will be allowed to own the EH while this task is
6609 * sleeping.
6610 *
6611 * LOCKING:
6612 * Might sleep.
6613 */
6614void ata_msleep(struct ata_port *ap, unsigned int msecs)
6615{
6616 bool owns_eh = ap && ap->host->eh_owner == current;
6617
6618 if (owns_eh)
6619 ata_eh_release(ap);
6620
6621 if (msecs < 20) {
6622 unsigned long usecs = msecs * USEC_PER_MSEC;
6623 usleep_range(usecs, usecs + 50);
6624 } else {
6625 msleep(msecs);
6626 }
6627
6628 if (owns_eh)
6629 ata_eh_acquire(ap);
6630}
6631EXPORT_SYMBOL_GPL(ata_msleep);
6632
6633/**
6634 * ata_wait_register - wait until register value changes
6635 * @ap: ATA port to wait register for, can be NULL
6636 * @reg: IO-mapped register
6637 * @mask: Mask to apply to read register value
6638 * @val: Wait condition
6639 * @interval: polling interval in milliseconds
6640 * @timeout: timeout in milliseconds
6641 *
6642 * Waiting for some bits of register to change is a common
6643 * operation for ATA controllers. This function reads 32bit LE
6644 * IO-mapped register @reg and tests for the following condition.
6645 *
6646 * (*@reg & mask) != val
6647 *
6648 * If the condition is met, it returns; otherwise, the process is
6649 * repeated after @interval_msec until timeout.
6650 *
6651 * LOCKING:
6652 * Kernel thread context (may sleep)
6653 *
6654 * RETURNS:
6655 * The final register value.
6656 */
6657u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val,
6658 unsigned int interval, unsigned int timeout)
6659{
6660 unsigned long deadline;
6661 u32 tmp;
6662
6663 tmp = ioread32(reg);
6664
6665 /* Calculate timeout _after_ the first read to make sure
6666 * preceding writes reach the controller before starting to
6667 * eat away the timeout.
6668 */
6669 deadline = ata_deadline(jiffies, timeout);
6670
6671 while ((tmp & mask) == val && time_before(jiffies, deadline)) {
6672 ata_msleep(ap, interval);
6673 tmp = ioread32(reg);
6674 }
6675
6676 return tmp;
6677}
6678EXPORT_SYMBOL_GPL(ata_wait_register);
6679
6680/*
6681 * Dummy port_ops
6682 */
6683static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
6684{
6685 return AC_ERR_SYSTEM;
6686}
6687
6688static void ata_dummy_error_handler(struct ata_port *ap)
6689{
6690 /* truly dummy */
6691}
6692
6693struct ata_port_operations ata_dummy_port_ops = {
6694 .qc_prep = ata_noop_qc_prep,
6695 .qc_issue = ata_dummy_qc_issue,
6696 .error_handler = ata_dummy_error_handler,
6697 .sched_eh = ata_std_sched_eh,
6698 .end_eh = ata_std_end_eh,
6699};
6700EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
6701
6702const struct ata_port_info ata_dummy_port_info = {
6703 .port_ops = &ata_dummy_port_ops,
6704};
6705EXPORT_SYMBOL_GPL(ata_dummy_port_info);
6706
6707void ata_print_version(const struct device *dev, const char *version)
6708{
6709 dev_printk(KERN_DEBUG, dev, "version %s\n", version);
6710}
6711EXPORT_SYMBOL(ata_print_version);
6712
6713EXPORT_TRACEPOINT_SYMBOL_GPL(ata_tf_load);
6714EXPORT_TRACEPOINT_SYMBOL_GPL(ata_exec_command);
6715EXPORT_TRACEPOINT_SYMBOL_GPL(ata_bmdma_setup);
6716EXPORT_TRACEPOINT_SYMBOL_GPL(ata_bmdma_start);
6717EXPORT_TRACEPOINT_SYMBOL_GPL(ata_bmdma_status);