Loading...
1/*
2 * An SPI driver for the Philips PCF2123 RTC
3 * Copyright 2009 Cyber Switching, Inc.
4 *
5 * Author: Chris Verges <chrisv@cyberswitching.com>
6 * Maintainers: http://www.cyberswitching.com
7 *
8 * based on the RS5C348 driver in this same directory.
9 *
10 * Thanks to Christian Pellegrin <chripell@fsfe.org> for
11 * the sysfs contributions to this driver.
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License version 2 as
15 * published by the Free Software Foundation.
16 *
17 * Please note that the CS is active high, so platform data
18 * should look something like:
19 *
20 * static struct spi_board_info ek_spi_devices[] = {
21 * ...
22 * {
23 * .modalias = "rtc-pcf2123",
24 * .chip_select = 1,
25 * .controller_data = (void *)AT91_PIN_PA10,
26 * .max_speed_hz = 1000 * 1000,
27 * .mode = SPI_CS_HIGH,
28 * .bus_num = 0,
29 * },
30 * ...
31 *};
32 *
33 */
34
35#include <linux/bcd.h>
36#include <linux/delay.h>
37#include <linux/device.h>
38#include <linux/errno.h>
39#include <linux/init.h>
40#include <linux/kernel.h>
41#include <linux/string.h>
42#include <linux/slab.h>
43#include <linux/rtc.h>
44#include <linux/spi/spi.h>
45#include <linux/module.h>
46
47#define DRV_VERSION "0.6"
48
49#define PCF2123_REG_CTRL1 (0x00) /* Control Register 1 */
50#define PCF2123_REG_CTRL2 (0x01) /* Control Register 2 */
51#define PCF2123_REG_SC (0x02) /* datetime */
52#define PCF2123_REG_MN (0x03)
53#define PCF2123_REG_HR (0x04)
54#define PCF2123_REG_DM (0x05)
55#define PCF2123_REG_DW (0x06)
56#define PCF2123_REG_MO (0x07)
57#define PCF2123_REG_YR (0x08)
58
59#define PCF2123_SUBADDR (1 << 4)
60#define PCF2123_WRITE ((0 << 7) | PCF2123_SUBADDR)
61#define PCF2123_READ ((1 << 7) | PCF2123_SUBADDR)
62
63static struct spi_driver pcf2123_driver;
64
65struct pcf2123_sysfs_reg {
66 struct device_attribute attr;
67 char name[2];
68};
69
70struct pcf2123_plat_data {
71 struct rtc_device *rtc;
72 struct pcf2123_sysfs_reg regs[16];
73};
74
75/*
76 * Causes a 30 nanosecond delay to ensure that the PCF2123 chip select
77 * is released properly after an SPI write. This function should be
78 * called after EVERY read/write call over SPI.
79 */
80static inline void pcf2123_delay_trec(void)
81{
82 ndelay(30);
83}
84
85static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
86 char *buffer)
87{
88 struct spi_device *spi = to_spi_device(dev);
89 struct pcf2123_sysfs_reg *r;
90 u8 txbuf[1], rxbuf[1];
91 unsigned long reg;
92 int ret;
93
94 r = container_of(attr, struct pcf2123_sysfs_reg, attr);
95
96 if (strict_strtoul(r->name, 16, ®))
97 return -EINVAL;
98
99 txbuf[0] = PCF2123_READ | reg;
100 ret = spi_write_then_read(spi, txbuf, 1, rxbuf, 1);
101 if (ret < 0)
102 return -EIO;
103 pcf2123_delay_trec();
104 return sprintf(buffer, "0x%x\n", rxbuf[0]);
105}
106
107static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
108 const char *buffer, size_t count) {
109 struct spi_device *spi = to_spi_device(dev);
110 struct pcf2123_sysfs_reg *r;
111 u8 txbuf[2];
112 unsigned long reg;
113 unsigned long val;
114
115 int ret;
116
117 r = container_of(attr, struct pcf2123_sysfs_reg, attr);
118
119 if (strict_strtoul(r->name, 16, ®)
120 || strict_strtoul(buffer, 10, &val))
121 return -EINVAL;
122
123 txbuf[0] = PCF2123_WRITE | reg;
124 txbuf[1] = val;
125 ret = spi_write(spi, txbuf, sizeof(txbuf));
126 if (ret < 0)
127 return -EIO;
128 pcf2123_delay_trec();
129 return count;
130}
131
132static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
133{
134 struct spi_device *spi = to_spi_device(dev);
135 u8 txbuf[1], rxbuf[7];
136 int ret;
137
138 txbuf[0] = PCF2123_READ | PCF2123_REG_SC;
139 ret = spi_write_then_read(spi, txbuf, sizeof(txbuf),
140 rxbuf, sizeof(rxbuf));
141 if (ret < 0)
142 return ret;
143 pcf2123_delay_trec();
144
145 tm->tm_sec = bcd2bin(rxbuf[0] & 0x7F);
146 tm->tm_min = bcd2bin(rxbuf[1] & 0x7F);
147 tm->tm_hour = bcd2bin(rxbuf[2] & 0x3F); /* rtc hr 0-23 */
148 tm->tm_mday = bcd2bin(rxbuf[3] & 0x3F);
149 tm->tm_wday = rxbuf[4] & 0x07;
150 tm->tm_mon = bcd2bin(rxbuf[5] & 0x1F) - 1; /* rtc mn 1-12 */
151 tm->tm_year = bcd2bin(rxbuf[6]);
152 if (tm->tm_year < 70)
153 tm->tm_year += 100; /* assume we are in 1970...2069 */
154
155 dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
156 "mday=%d, mon=%d, year=%d, wday=%d\n",
157 __func__,
158 tm->tm_sec, tm->tm_min, tm->tm_hour,
159 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
160
161 /* the clock can give out invalid datetime, but we cannot return
162 * -EINVAL otherwise hwclock will refuse to set the time on bootup.
163 */
164 if (rtc_valid_tm(tm) < 0)
165 dev_err(dev, "retrieved date/time is not valid.\n");
166
167 return 0;
168}
169
170static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
171{
172 struct spi_device *spi = to_spi_device(dev);
173 u8 txbuf[8];
174 int ret;
175
176 dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
177 "mday=%d, mon=%d, year=%d, wday=%d\n",
178 __func__,
179 tm->tm_sec, tm->tm_min, tm->tm_hour,
180 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
181
182 /* Stop the counter first */
183 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
184 txbuf[1] = 0x20;
185 ret = spi_write(spi, txbuf, 2);
186 if (ret < 0)
187 return ret;
188 pcf2123_delay_trec();
189
190 /* Set the new time */
191 txbuf[0] = PCF2123_WRITE | PCF2123_REG_SC;
192 txbuf[1] = bin2bcd(tm->tm_sec & 0x7F);
193 txbuf[2] = bin2bcd(tm->tm_min & 0x7F);
194 txbuf[3] = bin2bcd(tm->tm_hour & 0x3F);
195 txbuf[4] = bin2bcd(tm->tm_mday & 0x3F);
196 txbuf[5] = tm->tm_wday & 0x07;
197 txbuf[6] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */
198 txbuf[7] = bin2bcd(tm->tm_year < 100 ? tm->tm_year : tm->tm_year - 100);
199
200 ret = spi_write(spi, txbuf, sizeof(txbuf));
201 if (ret < 0)
202 return ret;
203 pcf2123_delay_trec();
204
205 /* Start the counter */
206 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
207 txbuf[1] = 0x00;
208 ret = spi_write(spi, txbuf, 2);
209 if (ret < 0)
210 return ret;
211 pcf2123_delay_trec();
212
213 return 0;
214}
215
216static const struct rtc_class_ops pcf2123_rtc_ops = {
217 .read_time = pcf2123_rtc_read_time,
218 .set_time = pcf2123_rtc_set_time,
219};
220
221static int __devinit pcf2123_probe(struct spi_device *spi)
222{
223 struct rtc_device *rtc;
224 struct pcf2123_plat_data *pdata;
225 u8 txbuf[2], rxbuf[2];
226 int ret, i;
227
228 pdata = kzalloc(sizeof(struct pcf2123_plat_data), GFP_KERNEL);
229 if (!pdata)
230 return -ENOMEM;
231 spi->dev.platform_data = pdata;
232
233 /* Send a software reset command */
234 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
235 txbuf[1] = 0x58;
236 dev_dbg(&spi->dev, "resetting RTC (0x%02X 0x%02X)\n",
237 txbuf[0], txbuf[1]);
238 ret = spi_write(spi, txbuf, 2 * sizeof(u8));
239 if (ret < 0)
240 goto kfree_exit;
241 pcf2123_delay_trec();
242
243 /* Stop the counter */
244 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
245 txbuf[1] = 0x20;
246 dev_dbg(&spi->dev, "stopping RTC (0x%02X 0x%02X)\n",
247 txbuf[0], txbuf[1]);
248 ret = spi_write(spi, txbuf, 2 * sizeof(u8));
249 if (ret < 0)
250 goto kfree_exit;
251 pcf2123_delay_trec();
252
253 /* See if the counter was actually stopped */
254 txbuf[0] = PCF2123_READ | PCF2123_REG_CTRL1;
255 dev_dbg(&spi->dev, "checking for presence of RTC (0x%02X)\n",
256 txbuf[0]);
257 ret = spi_write_then_read(spi, txbuf, 1 * sizeof(u8),
258 rxbuf, 2 * sizeof(u8));
259 dev_dbg(&spi->dev, "received data from RTC (0x%02X 0x%02X)\n",
260 rxbuf[0], rxbuf[1]);
261 if (ret < 0)
262 goto kfree_exit;
263 pcf2123_delay_trec();
264
265 if (!(rxbuf[0] & 0x20)) {
266 dev_err(&spi->dev, "chip not found\n");
267 goto kfree_exit;
268 }
269
270 dev_info(&spi->dev, "chip found, driver version " DRV_VERSION "\n");
271 dev_info(&spi->dev, "spiclk %u KHz.\n",
272 (spi->max_speed_hz + 500) / 1000);
273
274 /* Start the counter */
275 txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
276 txbuf[1] = 0x00;
277 ret = spi_write(spi, txbuf, sizeof(txbuf));
278 if (ret < 0)
279 goto kfree_exit;
280 pcf2123_delay_trec();
281
282 /* Finalize the initialization */
283 rtc = rtc_device_register(pcf2123_driver.driver.name, &spi->dev,
284 &pcf2123_rtc_ops, THIS_MODULE);
285
286 if (IS_ERR(rtc)) {
287 dev_err(&spi->dev, "failed to register.\n");
288 ret = PTR_ERR(rtc);
289 goto kfree_exit;
290 }
291
292 pdata->rtc = rtc;
293
294 for (i = 0; i < 16; i++) {
295 sprintf(pdata->regs[i].name, "%1x", i);
296 pdata->regs[i].attr.attr.mode = S_IRUGO | S_IWUSR;
297 pdata->regs[i].attr.attr.name = pdata->regs[i].name;
298 pdata->regs[i].attr.show = pcf2123_show;
299 pdata->regs[i].attr.store = pcf2123_store;
300 ret = device_create_file(&spi->dev, &pdata->regs[i].attr);
301 if (ret) {
302 dev_err(&spi->dev, "Unable to create sysfs %s\n",
303 pdata->regs[i].name);
304 goto sysfs_exit;
305 }
306 }
307
308 return 0;
309
310sysfs_exit:
311 for (i--; i >= 0; i--)
312 device_remove_file(&spi->dev, &pdata->regs[i].attr);
313
314kfree_exit:
315 kfree(pdata);
316 spi->dev.platform_data = NULL;
317 return ret;
318}
319
320static int __devexit pcf2123_remove(struct spi_device *spi)
321{
322 struct pcf2123_plat_data *pdata = spi->dev.platform_data;
323 int i;
324
325 if (pdata) {
326 struct rtc_device *rtc = pdata->rtc;
327
328 if (rtc)
329 rtc_device_unregister(rtc);
330 for (i = 0; i < 16; i++)
331 if (pdata->regs[i].name[0])
332 device_remove_file(&spi->dev,
333 &pdata->regs[i].attr);
334 kfree(pdata);
335 }
336
337 return 0;
338}
339
340static struct spi_driver pcf2123_driver = {
341 .driver = {
342 .name = "rtc-pcf2123",
343 .owner = THIS_MODULE,
344 },
345 .probe = pcf2123_probe,
346 .remove = __devexit_p(pcf2123_remove),
347};
348
349module_spi_driver(pcf2123_driver);
350
351MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>");
352MODULE_DESCRIPTION("NXP PCF2123 RTC driver");
353MODULE_LICENSE("GPL");
354MODULE_VERSION(DRV_VERSION);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * An SPI driver for the Philips PCF2123 RTC
4 * Copyright 2009 Cyber Switching, Inc.
5 *
6 * Author: Chris Verges <chrisv@cyberswitching.com>
7 * Maintainers: http://www.cyberswitching.com
8 *
9 * based on the RS5C348 driver in this same directory.
10 *
11 * Thanks to Christian Pellegrin <chripell@fsfe.org> for
12 * the sysfs contributions to this driver.
13 *
14 * Please note that the CS is active high, so platform data
15 * should look something like:
16 *
17 * static struct spi_board_info ek_spi_devices[] = {
18 * ...
19 * {
20 * .modalias = "rtc-pcf2123",
21 * .chip_select = 1,
22 * .controller_data = (void *)AT91_PIN_PA10,
23 * .max_speed_hz = 1000 * 1000,
24 * .mode = SPI_CS_HIGH,
25 * .bus_num = 0,
26 * },
27 * ...
28 *};
29 */
30
31#include <linux/bcd.h>
32#include <linux/delay.h>
33#include <linux/device.h>
34#include <linux/errno.h>
35#include <linux/init.h>
36#include <linux/kernel.h>
37#include <linux/of.h>
38#include <linux/string.h>
39#include <linux/slab.h>
40#include <linux/rtc.h>
41#include <linux/spi/spi.h>
42#include <linux/module.h>
43#include <linux/regmap.h>
44
45/* REGISTERS */
46#define PCF2123_REG_CTRL1 (0x00) /* Control Register 1 */
47#define PCF2123_REG_CTRL2 (0x01) /* Control Register 2 */
48#define PCF2123_REG_SC (0x02) /* datetime */
49#define PCF2123_REG_MN (0x03)
50#define PCF2123_REG_HR (0x04)
51#define PCF2123_REG_DM (0x05)
52#define PCF2123_REG_DW (0x06)
53#define PCF2123_REG_MO (0x07)
54#define PCF2123_REG_YR (0x08)
55#define PCF2123_REG_ALRM_MN (0x09) /* Alarm Registers */
56#define PCF2123_REG_ALRM_HR (0x0a)
57#define PCF2123_REG_ALRM_DM (0x0b)
58#define PCF2123_REG_ALRM_DW (0x0c)
59#define PCF2123_REG_OFFSET (0x0d) /* Clock Rate Offset Register */
60#define PCF2123_REG_TMR_CLKOUT (0x0e) /* Timer Registers */
61#define PCF2123_REG_CTDWN_TMR (0x0f)
62
63/* PCF2123_REG_CTRL1 BITS */
64#define CTRL1_CLEAR (0) /* Clear */
65#define CTRL1_CORR_INT BIT(1) /* Correction irq enable */
66#define CTRL1_12_HOUR BIT(2) /* 12 hour time */
67#define CTRL1_SW_RESET (BIT(3) | BIT(4) | BIT(6)) /* Software reset */
68#define CTRL1_STOP BIT(5) /* Stop the clock */
69#define CTRL1_EXT_TEST BIT(7) /* External clock test mode */
70
71/* PCF2123_REG_CTRL2 BITS */
72#define CTRL2_TIE BIT(0) /* Countdown timer irq enable */
73#define CTRL2_AIE BIT(1) /* Alarm irq enable */
74#define CTRL2_TF BIT(2) /* Countdown timer flag */
75#define CTRL2_AF BIT(3) /* Alarm flag */
76#define CTRL2_TI_TP BIT(4) /* Irq pin generates pulse */
77#define CTRL2_MSF BIT(5) /* Minute or second irq flag */
78#define CTRL2_SI BIT(6) /* Second irq enable */
79#define CTRL2_MI BIT(7) /* Minute irq enable */
80
81/* PCF2123_REG_SC BITS */
82#define OSC_HAS_STOPPED BIT(7) /* Clock has been stopped */
83
84/* PCF2123_REG_ALRM_XX BITS */
85#define ALRM_DISABLE BIT(7) /* MN, HR, DM, or DW alarm matching */
86
87/* PCF2123_REG_TMR_CLKOUT BITS */
88#define CD_TMR_4096KHZ (0) /* 4096 KHz countdown timer */
89#define CD_TMR_64HZ (1) /* 64 Hz countdown timer */
90#define CD_TMR_1HZ (2) /* 1 Hz countdown timer */
91#define CD_TMR_60th_HZ (3) /* 60th Hz countdown timer */
92#define CD_TMR_TE BIT(3) /* Countdown timer enable */
93
94/* PCF2123_REG_OFFSET BITS */
95#define OFFSET_SIGN_BIT 6 /* 2's complement sign bit */
96#define OFFSET_COARSE BIT(7) /* Coarse mode offset */
97#define OFFSET_STEP (2170) /* Offset step in parts per billion */
98#define OFFSET_MASK GENMASK(6, 0) /* Offset value */
99
100/* READ/WRITE ADDRESS BITS */
101#define PCF2123_WRITE BIT(4)
102#define PCF2123_READ (BIT(4) | BIT(7))
103
104
105static struct spi_driver pcf2123_driver;
106
107struct pcf2123_data {
108 struct rtc_device *rtc;
109 struct regmap *map;
110};
111
112static const struct regmap_config pcf2123_regmap_config = {
113 .reg_bits = 8,
114 .val_bits = 8,
115 .read_flag_mask = PCF2123_READ,
116 .write_flag_mask = PCF2123_WRITE,
117 .max_register = PCF2123_REG_CTDWN_TMR,
118};
119
120static int pcf2123_read_offset(struct device *dev, long *offset)
121{
122 struct pcf2123_data *pcf2123 = dev_get_drvdata(dev);
123 int ret, val;
124 unsigned int reg;
125
126 ret = regmap_read(pcf2123->map, PCF2123_REG_OFFSET, ®);
127 if (ret)
128 return ret;
129
130 val = sign_extend32((reg & OFFSET_MASK), OFFSET_SIGN_BIT);
131
132 if (reg & OFFSET_COARSE)
133 val *= 2;
134
135 *offset = ((long)val) * OFFSET_STEP;
136
137 return 0;
138}
139
140/*
141 * The offset register is a 7 bit signed value with a coarse bit in bit 7.
142 * The main difference between the two is normal offset adjusts the first
143 * second of n minutes every other hour, with 61, 62 and 63 being shoved
144 * into the 60th minute.
145 * The coarse adjustment does the same, but every hour.
146 * the two overlap, with every even normal offset value corresponding
147 * to a coarse offset. Based on this algorithm, it seems that despite the
148 * name, coarse offset is a better fit for overlapping values.
149 */
150static int pcf2123_set_offset(struct device *dev, long offset)
151{
152 struct pcf2123_data *pcf2123 = dev_get_drvdata(dev);
153 s8 reg;
154
155 if (offset > OFFSET_STEP * 127)
156 reg = 127;
157 else if (offset < OFFSET_STEP * -128)
158 reg = -128;
159 else
160 reg = DIV_ROUND_CLOSEST(offset, OFFSET_STEP);
161
162 /* choose fine offset only for odd values in the normal range */
163 if (reg & 1 && reg <= 63 && reg >= -64) {
164 /* Normal offset. Clear the coarse bit */
165 reg &= ~OFFSET_COARSE;
166 } else {
167 /* Coarse offset. Divide by 2 and set the coarse bit */
168 reg >>= 1;
169 reg |= OFFSET_COARSE;
170 }
171
172 return regmap_write(pcf2123->map, PCF2123_REG_OFFSET, (unsigned int)reg);
173}
174
175static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
176{
177 struct pcf2123_data *pcf2123 = dev_get_drvdata(dev);
178 u8 rxbuf[7];
179 int ret;
180
181 ret = regmap_bulk_read(pcf2123->map, PCF2123_REG_SC, rxbuf,
182 sizeof(rxbuf));
183 if (ret)
184 return ret;
185
186 if (rxbuf[0] & OSC_HAS_STOPPED) {
187 dev_info(dev, "clock was stopped. Time is not valid\n");
188 return -EINVAL;
189 }
190
191 tm->tm_sec = bcd2bin(rxbuf[0] & 0x7F);
192 tm->tm_min = bcd2bin(rxbuf[1] & 0x7F);
193 tm->tm_hour = bcd2bin(rxbuf[2] & 0x3F); /* rtc hr 0-23 */
194 tm->tm_mday = bcd2bin(rxbuf[3] & 0x3F);
195 tm->tm_wday = rxbuf[4] & 0x07;
196 tm->tm_mon = bcd2bin(rxbuf[5] & 0x1F) - 1; /* rtc mn 1-12 */
197 tm->tm_year = bcd2bin(rxbuf[6]) + 100;
198
199 dev_dbg(dev, "%s: tm is %ptR\n", __func__, tm);
200
201 return 0;
202}
203
204static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
205{
206 struct pcf2123_data *pcf2123 = dev_get_drvdata(dev);
207 u8 txbuf[7];
208 int ret;
209
210 dev_dbg(dev, "%s: tm is %ptR\n", __func__, tm);
211
212 /* Stop the counter first */
213 ret = regmap_write(pcf2123->map, PCF2123_REG_CTRL1, CTRL1_STOP);
214 if (ret)
215 return ret;
216
217 /* Set the new time */
218 txbuf[0] = bin2bcd(tm->tm_sec & 0x7F);
219 txbuf[1] = bin2bcd(tm->tm_min & 0x7F);
220 txbuf[2] = bin2bcd(tm->tm_hour & 0x3F);
221 txbuf[3] = bin2bcd(tm->tm_mday & 0x3F);
222 txbuf[4] = tm->tm_wday & 0x07;
223 txbuf[5] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */
224 txbuf[6] = bin2bcd(tm->tm_year - 100);
225
226 ret = regmap_bulk_write(pcf2123->map, PCF2123_REG_SC, txbuf,
227 sizeof(txbuf));
228 if (ret)
229 return ret;
230
231 /* Start the counter */
232 ret = regmap_write(pcf2123->map, PCF2123_REG_CTRL1, CTRL1_CLEAR);
233 if (ret)
234 return ret;
235
236 return 0;
237}
238
239static int pcf2123_rtc_alarm_irq_enable(struct device *dev, unsigned int en)
240{
241 struct pcf2123_data *pcf2123 = dev_get_drvdata(dev);
242
243 return regmap_update_bits(pcf2123->map, PCF2123_REG_CTRL2, CTRL2_AIE,
244 en ? CTRL2_AIE : 0);
245}
246
247static int pcf2123_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
248{
249 struct pcf2123_data *pcf2123 = dev_get_drvdata(dev);
250 u8 rxbuf[4];
251 int ret;
252 unsigned int val = 0;
253
254 ret = regmap_bulk_read(pcf2123->map, PCF2123_REG_ALRM_MN, rxbuf,
255 sizeof(rxbuf));
256 if (ret)
257 return ret;
258
259 alm->time.tm_min = bcd2bin(rxbuf[0] & 0x7F);
260 alm->time.tm_hour = bcd2bin(rxbuf[1] & 0x3F);
261 alm->time.tm_mday = bcd2bin(rxbuf[2] & 0x3F);
262 alm->time.tm_wday = bcd2bin(rxbuf[3] & 0x07);
263
264 dev_dbg(dev, "%s: alm is %ptR\n", __func__, &alm->time);
265
266 ret = regmap_read(pcf2123->map, PCF2123_REG_CTRL2, &val);
267 if (ret)
268 return ret;
269
270 alm->enabled = !!(val & CTRL2_AIE);
271
272 return 0;
273}
274
275static int pcf2123_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
276{
277 struct pcf2123_data *pcf2123 = dev_get_drvdata(dev);
278 u8 txbuf[4];
279 int ret;
280
281 dev_dbg(dev, "%s: alm is %ptR\n", __func__, &alm->time);
282
283 /* Disable alarm interrupt */
284 ret = regmap_update_bits(pcf2123->map, PCF2123_REG_CTRL2, CTRL2_AIE, 0);
285 if (ret)
286 return ret;
287
288 /* Ensure alarm flag is clear */
289 ret = regmap_update_bits(pcf2123->map, PCF2123_REG_CTRL2, CTRL2_AF, 0);
290 if (ret)
291 return ret;
292
293 /* Set new alarm */
294 txbuf[0] = bin2bcd(alm->time.tm_min & 0x7F);
295 txbuf[1] = bin2bcd(alm->time.tm_hour & 0x3F);
296 txbuf[2] = bin2bcd(alm->time.tm_mday & 0x3F);
297 txbuf[3] = ALRM_DISABLE;
298
299 ret = regmap_bulk_write(pcf2123->map, PCF2123_REG_ALRM_MN, txbuf,
300 sizeof(txbuf));
301 if (ret)
302 return ret;
303
304 return pcf2123_rtc_alarm_irq_enable(dev, alm->enabled);
305}
306
307static irqreturn_t pcf2123_rtc_irq(int irq, void *dev)
308{
309 struct pcf2123_data *pcf2123 = dev_get_drvdata(dev);
310 unsigned int val = 0;
311 int ret = IRQ_NONE;
312
313 rtc_lock(pcf2123->rtc);
314 regmap_read(pcf2123->map, PCF2123_REG_CTRL2, &val);
315
316 /* Alarm? */
317 if (val & CTRL2_AF) {
318 ret = IRQ_HANDLED;
319
320 /* Clear alarm flag */
321 regmap_update_bits(pcf2123->map, PCF2123_REG_CTRL2, CTRL2_AF, 0);
322
323 rtc_update_irq(pcf2123->rtc, 1, RTC_IRQF | RTC_AF);
324 }
325
326 rtc_unlock(pcf2123->rtc);
327
328 return ret;
329}
330
331static int pcf2123_reset(struct device *dev)
332{
333 struct pcf2123_data *pcf2123 = dev_get_drvdata(dev);
334 int ret;
335 unsigned int val = 0;
336
337 ret = regmap_write(pcf2123->map, PCF2123_REG_CTRL1, CTRL1_SW_RESET);
338 if (ret)
339 return ret;
340
341 /* Stop the counter */
342 dev_dbg(dev, "stopping RTC\n");
343 ret = regmap_write(pcf2123->map, PCF2123_REG_CTRL1, CTRL1_STOP);
344 if (ret)
345 return ret;
346
347 /* See if the counter was actually stopped */
348 dev_dbg(dev, "checking for presence of RTC\n");
349 ret = regmap_read(pcf2123->map, PCF2123_REG_CTRL1, &val);
350 if (ret)
351 return ret;
352
353 dev_dbg(dev, "received data from RTC (0x%08X)\n", val);
354 if (!(val & CTRL1_STOP))
355 return -ENODEV;
356
357 /* Start the counter */
358 ret = regmap_write(pcf2123->map, PCF2123_REG_CTRL1, CTRL1_CLEAR);
359 if (ret)
360 return ret;
361
362 return 0;
363}
364
365static const struct rtc_class_ops pcf2123_rtc_ops = {
366 .read_time = pcf2123_rtc_read_time,
367 .set_time = pcf2123_rtc_set_time,
368 .read_offset = pcf2123_read_offset,
369 .set_offset = pcf2123_set_offset,
370 .read_alarm = pcf2123_rtc_read_alarm,
371 .set_alarm = pcf2123_rtc_set_alarm,
372 .alarm_irq_enable = pcf2123_rtc_alarm_irq_enable,
373};
374
375static int pcf2123_probe(struct spi_device *spi)
376{
377 struct rtc_device *rtc;
378 struct rtc_time tm;
379 struct pcf2123_data *pcf2123;
380 int ret = 0;
381
382 pcf2123 = devm_kzalloc(&spi->dev, sizeof(struct pcf2123_data),
383 GFP_KERNEL);
384 if (!pcf2123)
385 return -ENOMEM;
386
387 dev_set_drvdata(&spi->dev, pcf2123);
388
389 pcf2123->map = devm_regmap_init_spi(spi, &pcf2123_regmap_config);
390 if (IS_ERR(pcf2123->map)) {
391 dev_err(&spi->dev, "regmap init failed.\n");
392 return PTR_ERR(pcf2123->map);
393 }
394
395 ret = pcf2123_rtc_read_time(&spi->dev, &tm);
396 if (ret < 0) {
397 ret = pcf2123_reset(&spi->dev);
398 if (ret < 0) {
399 dev_err(&spi->dev, "chip not found\n");
400 return ret;
401 }
402 }
403
404 dev_info(&spi->dev, "spiclk %u KHz.\n",
405 (spi->max_speed_hz + 500) / 1000);
406
407 /* Finalize the initialization */
408 rtc = devm_rtc_allocate_device(&spi->dev);
409 if (IS_ERR(rtc))
410 return PTR_ERR(rtc);
411
412 pcf2123->rtc = rtc;
413
414 /* Register alarm irq */
415 if (spi->irq > 0) {
416 ret = devm_request_threaded_irq(&spi->dev, spi->irq, NULL,
417 pcf2123_rtc_irq,
418 IRQF_TRIGGER_LOW | IRQF_ONESHOT,
419 pcf2123_driver.driver.name, &spi->dev);
420 if (!ret)
421 device_init_wakeup(&spi->dev, true);
422 else
423 dev_err(&spi->dev, "could not request irq.\n");
424 }
425
426 /* The PCF2123's alarm only has minute accuracy. Must add timer
427 * support to this driver to generate interrupts more than once
428 * per minute.
429 */
430 set_bit(RTC_FEATURE_ALARM_RES_MINUTE, rtc->features);
431 clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->features);
432 rtc->ops = &pcf2123_rtc_ops;
433 rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
434 rtc->range_max = RTC_TIMESTAMP_END_2099;
435 rtc->set_start_time = true;
436
437 ret = devm_rtc_register_device(rtc);
438 if (ret)
439 return ret;
440
441 return 0;
442}
443
444#ifdef CONFIG_OF
445static const struct of_device_id pcf2123_dt_ids[] = {
446 { .compatible = "nxp,pcf2123", },
447 { .compatible = "microcrystal,rv2123", },
448 /* Deprecated, do not use */
449 { .compatible = "nxp,rtc-pcf2123", },
450 { /* sentinel */ }
451};
452MODULE_DEVICE_TABLE(of, pcf2123_dt_ids);
453#endif
454
455static const struct spi_device_id pcf2123_spi_ids[] = {
456 { .name = "pcf2123", },
457 { .name = "rv2123", },
458 { .name = "rtc-pcf2123", },
459 { /* sentinel */ }
460};
461MODULE_DEVICE_TABLE(spi, pcf2123_spi_ids);
462
463static struct spi_driver pcf2123_driver = {
464 .driver = {
465 .name = "rtc-pcf2123",
466 .of_match_table = of_match_ptr(pcf2123_dt_ids),
467 },
468 .probe = pcf2123_probe,
469 .id_table = pcf2123_spi_ids,
470};
471
472module_spi_driver(pcf2123_driver);
473
474MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>");
475MODULE_DESCRIPTION("NXP PCF2123 RTC driver");
476MODULE_LICENSE("GPL");