Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.5.6.
  1// SPDX-License-Identifier: GPL-2.0
  2
  3/*
  4 * Buddha, Catweasel and X-Surf PATA controller driver
  5 *
  6 * Copyright (c) 2018 Samsung Electronics Co., Ltd.
  7 *		http://www.samsung.com
  8 *
  9 * Based on buddha.c:
 10 *
 11 *	Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
 12 */
 13
 14#include <linux/ata.h>
 15#include <linux/blkdev.h>
 16#include <linux/delay.h>
 17#include <linux/interrupt.h>
 18#include <linux/kernel.h>
 19#include <linux/libata.h>
 20#include <linux/mm.h>
 21#include <linux/mod_devicetable.h>
 22#include <linux/module.h>
 23#include <linux/types.h>
 24#include <linux/zorro.h>
 25#include <scsi/scsi_cmnd.h>
 26#include <scsi/scsi_host.h>
 27
 28#include <asm/amigahw.h>
 29#include <asm/amigaints.h>
 30#include <asm/ide.h>
 31#include <asm/setup.h>
 32
 33#define DRV_NAME "pata_buddha"
 34#define DRV_VERSION "0.1.1"
 35
 36#define BUDDHA_BASE1	0x800
 37#define BUDDHA_BASE2	0xa00
 38#define BUDDHA_BASE3	0xc00
 39#define XSURF_BASE1	0xb000 /* 2.5" interface */
 40#define XSURF_BASE2	0xd000 /* 3.5" interface */
 41#define BUDDHA_CONTROL	0x11a
 42#define BUDDHA_IRQ	0xf00
 43#define XSURF_IRQ	0x7e
 44#define BUDDHA_IRQ_MR	0xfc0	/* master interrupt enable */
 45
 46enum {
 47	BOARD_BUDDHA = 0,
 48	BOARD_CATWEASEL,
 49	BOARD_XSURF
 50};
 51
 52static unsigned int buddha_bases[3] = {
 53	BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
 54};
 55
 56static unsigned int xsurf_bases[2] = {
 57	XSURF_BASE1, XSURF_BASE2
 58};
 59
 60static struct scsi_host_template pata_buddha_sht = {
 61	ATA_PIO_SHT(DRV_NAME),
 62};
 63
 64/* FIXME: is this needed? */
 65static unsigned int pata_buddha_data_xfer(struct ata_queued_cmd *qc,
 66					 unsigned char *buf,
 67					 unsigned int buflen, int rw)
 68{
 69	struct ata_device *dev = qc->dev;
 70	struct ata_port *ap = dev->link->ap;
 71	void __iomem *data_addr = ap->ioaddr.data_addr;
 72	unsigned int words = buflen >> 1;
 73
 74	/* Transfer multiple of 2 bytes */
 75	if (rw == READ)
 76		raw_insw((u16 *)data_addr, (u16 *)buf, words);
 77	else
 78		raw_outsw((u16 *)data_addr, (u16 *)buf, words);
 79
 80	/* Transfer trailing byte, if any. */
 81	if (unlikely(buflen & 0x01)) {
 82		unsigned char pad[2] = { };
 83
 84		/* Point buf to the tail of buffer */
 85		buf += buflen - 1;
 86
 87		if (rw == READ) {
 88			raw_insw((u16 *)data_addr, (u16 *)pad, 1);
 89			*buf = pad[0];
 90		} else {
 91			pad[0] = *buf;
 92			raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
 93		}
 94		words++;
 95	}
 96
 97	return words << 1;
 98}
 99
100/*
101 * Provide our own set_mode() as we don't want to change anything that has
102 * already been configured..
103 */
104static int pata_buddha_set_mode(struct ata_link *link,
105				struct ata_device **unused)
106{
107	struct ata_device *dev;
108
109	ata_for_each_dev(dev, link, ENABLED) {
110		/* We don't really care */
111		dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
112		dev->xfer_shift = ATA_SHIFT_PIO;
113		dev->flags |= ATA_DFLAG_PIO;
114		ata_dev_info(dev, "configured for PIO\n");
115	}
116	return 0;
117}
118
119static bool pata_buddha_irq_check(struct ata_port *ap)
120{
121	u8 ch;
122
123	ch = z_readb((unsigned long)ap->private_data);
124
125	return !!(ch & 0x80);
126}
127
128static void pata_xsurf_irq_clear(struct ata_port *ap)
129{
130	z_writeb(0, (unsigned long)ap->private_data);
131}
132
133static struct ata_port_operations pata_buddha_ops = {
134	.inherits	= &ata_sff_port_ops,
135	.sff_data_xfer	= pata_buddha_data_xfer,
136	.sff_irq_check	= pata_buddha_irq_check,
137	.cable_detect	= ata_cable_unknown,
138	.set_mode	= pata_buddha_set_mode,
139};
140
141static struct ata_port_operations pata_xsurf_ops = {
142	.inherits	= &ata_sff_port_ops,
143	.sff_data_xfer	= pata_buddha_data_xfer,
144	.sff_irq_check	= pata_buddha_irq_check,
145	.sff_irq_clear	= pata_xsurf_irq_clear,
146	.cable_detect	= ata_cable_unknown,
147	.set_mode	= pata_buddha_set_mode,
148};
149
150static int pata_buddha_probe(struct zorro_dev *z,
151			     const struct zorro_device_id *ent)
152{
153	static const char * const board_name[] = {
154		"Buddha", "Catweasel", "X-Surf"
155	};
156	struct ata_host *host;
157	void __iomem *buddha_board;
158	unsigned long board;
159	unsigned int type = ent->driver_data;
160	unsigned int nr_ports = (type == BOARD_CATWEASEL) ? 3 : 2;
161	void *old_drvdata;
162	int i;
163
164	dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
165
166	board = z->resource.start;
167
168	if (type != BOARD_XSURF) {
169		if (!devm_request_mem_region(&z->dev,
170					     board + BUDDHA_BASE1,
171					     0x800, DRV_NAME))
172			return -ENXIO;
173	} else {
174		if (!devm_request_mem_region(&z->dev,
175					     board + XSURF_BASE1,
176					     0x1000, DRV_NAME))
177			return -ENXIO;
178		if (!devm_request_mem_region(&z->dev,
179					     board + XSURF_BASE2,
180					     0x1000, DRV_NAME)) {
181		}
182	}
183
184	/* Workaround for X-Surf: Save drvdata in case zorro8390 has set it */
185	if (type == BOARD_XSURF)
186		old_drvdata = dev_get_drvdata(&z->dev);
187
188	/* allocate host */
189	host = ata_host_alloc(&z->dev, nr_ports);
190	if (type == BOARD_XSURF)
191		dev_set_drvdata(&z->dev, old_drvdata);
192	if (!host)
193		return -ENXIO;
194
195	buddha_board = ZTWO_VADDR(board);
196
197	/* enable the board IRQ on Buddha/Catweasel */
198	if (type != BOARD_XSURF)
199		z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
200
201	for (i = 0; i < nr_ports; i++) {
202		struct ata_port *ap = host->ports[i];
203		void __iomem *base, *irqport;
204		unsigned long ctl = 0;
205
206		if (type != BOARD_XSURF) {
207			ap->ops = &pata_buddha_ops;
208			base = buddha_board + buddha_bases[i];
209			ctl = BUDDHA_CONTROL;
210			irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
211		} else {
212			ap->ops = &pata_xsurf_ops;
213			base = buddha_board + xsurf_bases[i];
214			/* X-Surf has no CS1* (Control/AltStat) */
215			irqport = buddha_board + XSURF_IRQ;
216		}
217
218		ap->pio_mask = ATA_PIO4;
219		ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
220
221		ap->ioaddr.data_addr		= base;
222		ap->ioaddr.error_addr		= base + 2 + 1 * 4;
223		ap->ioaddr.feature_addr		= base + 2 + 1 * 4;
224		ap->ioaddr.nsect_addr		= base + 2 + 2 * 4;
225		ap->ioaddr.lbal_addr		= base + 2 + 3 * 4;
226		ap->ioaddr.lbam_addr		= base + 2 + 4 * 4;
227		ap->ioaddr.lbah_addr		= base + 2 + 5 * 4;
228		ap->ioaddr.device_addr		= base + 2 + 6 * 4;
229		ap->ioaddr.status_addr		= base + 2 + 7 * 4;
230		ap->ioaddr.command_addr		= base + 2 + 7 * 4;
231
232		if (ctl) {
233			ap->ioaddr.altstatus_addr = base + ctl;
234			ap->ioaddr.ctl_addr	  = base + ctl;
235		}
236
237		ap->private_data = (void *)irqport;
238
239		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
240			      ctl ? board + buddha_bases[i] + ctl : 0);
241	}
242
243	ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
244			  IRQF_SHARED, &pata_buddha_sht);
245
246	return 0;
247}
248
249static void pata_buddha_remove(struct zorro_dev *z)
250{
251	struct ata_host *host = dev_get_drvdata(&z->dev);
252
253	ata_host_detach(host);
254}
255
256static const struct zorro_device_id pata_buddha_zorro_tbl[] = {
257	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA, BOARD_BUDDHA},
258	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL, BOARD_CATWEASEL},
259	{ 0 }
260};
261MODULE_DEVICE_TABLE(zorro, pata_buddha_zorro_tbl);
262
263static struct zorro_driver pata_buddha_driver = {
264	.name           = "pata_buddha",
265	.id_table       = pata_buddha_zorro_tbl,
266	.probe          = pata_buddha_probe,
267	.remove         = pata_buddha_remove,
268};
269
270/*
271 * We cannot have a modalias for X-Surf boards, as it competes with the
272 * zorro8390 network driver. As a stopgap measure until we have proper
273 * MFD support for this board, we manually attach to it late after Zorro
274 * has enumerated its boards.
275 */
276static int __init pata_buddha_late_init(void)
277{
278	struct zorro_dev *z = NULL;
279
280	/* Auto-bind to regular boards */
281	zorro_register_driver(&pata_buddha_driver);
282
283	/* Manually bind to all X-Surf boards */
284	while ((z = zorro_find_device(ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, z))) {
285		static struct zorro_device_id xsurf_ent = {
286			ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, BOARD_XSURF
287		};
288
289		pata_buddha_probe(z, &xsurf_ent);
290	}
291
292	return 0;
293}
294late_initcall(pata_buddha_late_init);
295
296MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
297MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA");
298MODULE_LICENSE("GPL v2");
299MODULE_VERSION(DRV_VERSION);