Loading...
1/*******************************************************************************
2 *
3 * Module Name: dsmthdat - control method arguments and local variables
4 *
5 ******************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2012, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acdispat.h"
47#include "acnamesp.h"
48#include "acinterp.h"
49
50#define _COMPONENT ACPI_DISPATCHER
51ACPI_MODULE_NAME("dsmthdat")
52
53/* Local prototypes */
54static void
55acpi_ds_method_data_delete_value(u8 type,
56 u32 index, struct acpi_walk_state *walk_state);
57
58static acpi_status
59acpi_ds_method_data_set_value(u8 type,
60 u32 index,
61 union acpi_operand_object *object,
62 struct acpi_walk_state *walk_state);
63
64#ifdef ACPI_OBSOLETE_FUNCTIONS
65acpi_object_type
66acpi_ds_method_data_get_type(u16 opcode,
67 u32 index, struct acpi_walk_state *walk_state);
68#endif
69
70/*******************************************************************************
71 *
72 * FUNCTION: acpi_ds_method_data_init
73 *
74 * PARAMETERS: walk_state - Current walk state object
75 *
76 * RETURN: Status
77 *
78 * DESCRIPTION: Initialize the data structures that hold the method's arguments
79 * and locals. The data struct is an array of namespace nodes for
80 * each - this allows ref_of and de_ref_of to work properly for these
81 * special data types.
82 *
83 * NOTES: walk_state fields are initialized to zero by the
84 * ACPI_ALLOCATE_ZEROED().
85 *
86 * A pseudo-Namespace Node is assigned to each argument and local
87 * so that ref_of() can return a pointer to the Node.
88 *
89 ******************************************************************************/
90
91void acpi_ds_method_data_init(struct acpi_walk_state *walk_state)
92{
93 u32 i;
94
95 ACPI_FUNCTION_TRACE(ds_method_data_init);
96
97 /* Init the method arguments */
98
99 for (i = 0; i < ACPI_METHOD_NUM_ARGS; i++) {
100 ACPI_MOVE_32_TO_32(&walk_state->arguments[i].name,
101 NAMEOF_ARG_NTE);
102 walk_state->arguments[i].name.integer |= (i << 24);
103 walk_state->arguments[i].descriptor_type = ACPI_DESC_TYPE_NAMED;
104 walk_state->arguments[i].type = ACPI_TYPE_ANY;
105 walk_state->arguments[i].flags = ANOBJ_METHOD_ARG;
106 }
107
108 /* Init the method locals */
109
110 for (i = 0; i < ACPI_METHOD_NUM_LOCALS; i++) {
111 ACPI_MOVE_32_TO_32(&walk_state->local_variables[i].name,
112 NAMEOF_LOCAL_NTE);
113
114 walk_state->local_variables[i].name.integer |= (i << 24);
115 walk_state->local_variables[i].descriptor_type =
116 ACPI_DESC_TYPE_NAMED;
117 walk_state->local_variables[i].type = ACPI_TYPE_ANY;
118 walk_state->local_variables[i].flags = ANOBJ_METHOD_LOCAL;
119 }
120
121 return_VOID;
122}
123
124/*******************************************************************************
125 *
126 * FUNCTION: acpi_ds_method_data_delete_all
127 *
128 * PARAMETERS: walk_state - Current walk state object
129 *
130 * RETURN: None
131 *
132 * DESCRIPTION: Delete method locals and arguments. Arguments are only
133 * deleted if this method was called from another method.
134 *
135 ******************************************************************************/
136
137void acpi_ds_method_data_delete_all(struct acpi_walk_state *walk_state)
138{
139 u32 index;
140
141 ACPI_FUNCTION_TRACE(ds_method_data_delete_all);
142
143 /* Detach the locals */
144
145 for (index = 0; index < ACPI_METHOD_NUM_LOCALS; index++) {
146 if (walk_state->local_variables[index].object) {
147 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Deleting Local%u=%p\n",
148 index,
149 walk_state->local_variables[index].
150 object));
151
152 /* Detach object (if present) and remove a reference */
153
154 acpi_ns_detach_object(&walk_state->
155 local_variables[index]);
156 }
157 }
158
159 /* Detach the arguments */
160
161 for (index = 0; index < ACPI_METHOD_NUM_ARGS; index++) {
162 if (walk_state->arguments[index].object) {
163 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Deleting Arg%u=%p\n",
164 index,
165 walk_state->arguments[index].object));
166
167 /* Detach object (if present) and remove a reference */
168
169 acpi_ns_detach_object(&walk_state->arguments[index]);
170 }
171 }
172
173 return_VOID;
174}
175
176/*******************************************************************************
177 *
178 * FUNCTION: acpi_ds_method_data_init_args
179 *
180 * PARAMETERS: *Params - Pointer to a parameter list for the method
181 * max_param_count - The arg count for this method
182 * walk_state - Current walk state object
183 *
184 * RETURN: Status
185 *
186 * DESCRIPTION: Initialize arguments for a method. The parameter list is a list
187 * of ACPI operand objects, either null terminated or whose length
188 * is defined by max_param_count.
189 *
190 ******************************************************************************/
191
192acpi_status
193acpi_ds_method_data_init_args(union acpi_operand_object **params,
194 u32 max_param_count,
195 struct acpi_walk_state *walk_state)
196{
197 acpi_status status;
198 u32 index = 0;
199
200 ACPI_FUNCTION_TRACE_PTR(ds_method_data_init_args, params);
201
202 if (!params) {
203 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
204 "No param list passed to method\n"));
205 return_ACPI_STATUS(AE_OK);
206 }
207
208 /* Copy passed parameters into the new method stack frame */
209
210 while ((index < ACPI_METHOD_NUM_ARGS) &&
211 (index < max_param_count) && params[index]) {
212 /*
213 * A valid parameter.
214 * Store the argument in the method/walk descriptor.
215 * Do not copy the arg in order to implement call by reference
216 */
217 status = acpi_ds_method_data_set_value(ACPI_REFCLASS_ARG, index,
218 params[index],
219 walk_state);
220 if (ACPI_FAILURE(status)) {
221 return_ACPI_STATUS(status);
222 }
223
224 index++;
225 }
226
227 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%u args passed to method\n", index));
228 return_ACPI_STATUS(AE_OK);
229}
230
231/*******************************************************************************
232 *
233 * FUNCTION: acpi_ds_method_data_get_node
234 *
235 * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
236 * ACPI_REFCLASS_ARG
237 * Index - Which Local or Arg whose type to get
238 * walk_state - Current walk state object
239 * Node - Where the node is returned.
240 *
241 * RETURN: Status and node
242 *
243 * DESCRIPTION: Get the Node associated with a local or arg.
244 *
245 ******************************************************************************/
246
247acpi_status
248acpi_ds_method_data_get_node(u8 type,
249 u32 index,
250 struct acpi_walk_state *walk_state,
251 struct acpi_namespace_node **node)
252{
253 ACPI_FUNCTION_TRACE(ds_method_data_get_node);
254
255 /*
256 * Method Locals and Arguments are supported
257 */
258 switch (type) {
259 case ACPI_REFCLASS_LOCAL:
260
261 if (index > ACPI_METHOD_MAX_LOCAL) {
262 ACPI_ERROR((AE_INFO,
263 "Local index %u is invalid (max %u)",
264 index, ACPI_METHOD_MAX_LOCAL));
265 return_ACPI_STATUS(AE_AML_INVALID_INDEX);
266 }
267
268 /* Return a pointer to the pseudo-node */
269
270 *node = &walk_state->local_variables[index];
271 break;
272
273 case ACPI_REFCLASS_ARG:
274
275 if (index > ACPI_METHOD_MAX_ARG) {
276 ACPI_ERROR((AE_INFO,
277 "Arg index %u is invalid (max %u)",
278 index, ACPI_METHOD_MAX_ARG));
279 return_ACPI_STATUS(AE_AML_INVALID_INDEX);
280 }
281
282 /* Return a pointer to the pseudo-node */
283
284 *node = &walk_state->arguments[index];
285 break;
286
287 default:
288 ACPI_ERROR((AE_INFO, "Type %u is invalid", type));
289 return_ACPI_STATUS(AE_TYPE);
290 }
291
292 return_ACPI_STATUS(AE_OK);
293}
294
295/*******************************************************************************
296 *
297 * FUNCTION: acpi_ds_method_data_set_value
298 *
299 * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
300 * ACPI_REFCLASS_ARG
301 * Index - Which Local or Arg to get
302 * Object - Object to be inserted into the stack entry
303 * walk_state - Current walk state object
304 *
305 * RETURN: Status
306 *
307 * DESCRIPTION: Insert an object onto the method stack at entry Opcode:Index.
308 * Note: There is no "implicit conversion" for locals.
309 *
310 ******************************************************************************/
311
312static acpi_status
313acpi_ds_method_data_set_value(u8 type,
314 u32 index,
315 union acpi_operand_object *object,
316 struct acpi_walk_state *walk_state)
317{
318 acpi_status status;
319 struct acpi_namespace_node *node;
320
321 ACPI_FUNCTION_TRACE(ds_method_data_set_value);
322
323 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
324 "NewObj %p Type %2.2X, Refs=%u [%s]\n", object,
325 type, object->common.reference_count,
326 acpi_ut_get_type_name(object->common.type)));
327
328 /* Get the namespace node for the arg/local */
329
330 status = acpi_ds_method_data_get_node(type, index, walk_state, &node);
331 if (ACPI_FAILURE(status)) {
332 return_ACPI_STATUS(status);
333 }
334
335 /*
336 * Increment ref count so object can't be deleted while installed.
337 * NOTE: We do not copy the object in order to preserve the call by
338 * reference semantics of ACPI Control Method invocation.
339 * (See ACPI Specification 2.0_c)
340 */
341 acpi_ut_add_reference(object);
342
343 /* Install the object */
344
345 node->object = object;
346 return_ACPI_STATUS(status);
347}
348
349/*******************************************************************************
350 *
351 * FUNCTION: acpi_ds_method_data_get_value
352 *
353 * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
354 * ACPI_REFCLASS_ARG
355 * Index - Which local_var or argument to get
356 * walk_state - Current walk state object
357 * dest_desc - Where Arg or Local value is returned
358 *
359 * RETURN: Status
360 *
361 * DESCRIPTION: Retrieve value of selected Arg or Local for this method
362 * Used only in acpi_ex_resolve_to_value().
363 *
364 ******************************************************************************/
365
366acpi_status
367acpi_ds_method_data_get_value(u8 type,
368 u32 index,
369 struct acpi_walk_state *walk_state,
370 union acpi_operand_object **dest_desc)
371{
372 acpi_status status;
373 struct acpi_namespace_node *node;
374 union acpi_operand_object *object;
375
376 ACPI_FUNCTION_TRACE(ds_method_data_get_value);
377
378 /* Validate the object descriptor */
379
380 if (!dest_desc) {
381 ACPI_ERROR((AE_INFO, "Null object descriptor pointer"));
382 return_ACPI_STATUS(AE_BAD_PARAMETER);
383 }
384
385 /* Get the namespace node for the arg/local */
386
387 status = acpi_ds_method_data_get_node(type, index, walk_state, &node);
388 if (ACPI_FAILURE(status)) {
389 return_ACPI_STATUS(status);
390 }
391
392 /* Get the object from the node */
393
394 object = node->object;
395
396 /* Examine the returned object, it must be valid. */
397
398 if (!object) {
399 /*
400 * Index points to uninitialized object.
401 * This means that either 1) The expected argument was
402 * not passed to the method, or 2) A local variable
403 * was referenced by the method (via the ASL)
404 * before it was initialized. Either case is an error.
405 */
406
407 /* If slack enabled, init the local_x/arg_x to an Integer of value zero */
408
409 if (acpi_gbl_enable_interpreter_slack) {
410 object = acpi_ut_create_integer_object((u64) 0);
411 if (!object) {
412 return_ACPI_STATUS(AE_NO_MEMORY);
413 }
414
415 node->object = object;
416 }
417
418 /* Otherwise, return the error */
419
420 else
421 switch (type) {
422 case ACPI_REFCLASS_ARG:
423
424 ACPI_ERROR((AE_INFO,
425 "Uninitialized Arg[%u] at node %p",
426 index, node));
427
428 return_ACPI_STATUS(AE_AML_UNINITIALIZED_ARG);
429
430 case ACPI_REFCLASS_LOCAL:
431
432 /*
433 * No error message for this case, will be trapped again later to
434 * detect and ignore cases of Store(local_x,local_x)
435 */
436 return_ACPI_STATUS(AE_AML_UNINITIALIZED_LOCAL);
437
438 default:
439
440 ACPI_ERROR((AE_INFO,
441 "Not a Arg/Local opcode: 0x%X",
442 type));
443 return_ACPI_STATUS(AE_AML_INTERNAL);
444 }
445 }
446
447 /*
448 * The Index points to an initialized and valid object.
449 * Return an additional reference to the object
450 */
451 *dest_desc = object;
452 acpi_ut_add_reference(object);
453
454 return_ACPI_STATUS(AE_OK);
455}
456
457/*******************************************************************************
458 *
459 * FUNCTION: acpi_ds_method_data_delete_value
460 *
461 * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
462 * ACPI_REFCLASS_ARG
463 * Index - Which local_var or argument to delete
464 * walk_state - Current walk state object
465 *
466 * RETURN: None
467 *
468 * DESCRIPTION: Delete the entry at Opcode:Index. Inserts
469 * a null into the stack slot after the object is deleted.
470 *
471 ******************************************************************************/
472
473static void
474acpi_ds_method_data_delete_value(u8 type,
475 u32 index, struct acpi_walk_state *walk_state)
476{
477 acpi_status status;
478 struct acpi_namespace_node *node;
479 union acpi_operand_object *object;
480
481 ACPI_FUNCTION_TRACE(ds_method_data_delete_value);
482
483 /* Get the namespace node for the arg/local */
484
485 status = acpi_ds_method_data_get_node(type, index, walk_state, &node);
486 if (ACPI_FAILURE(status)) {
487 return_VOID;
488 }
489
490 /* Get the associated object */
491
492 object = acpi_ns_get_attached_object(node);
493
494 /*
495 * Undefine the Arg or Local by setting its descriptor
496 * pointer to NULL. Locals/Args can contain both
497 * ACPI_OPERAND_OBJECTS and ACPI_NAMESPACE_NODEs
498 */
499 node->object = NULL;
500
501 if ((object) &&
502 (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_OPERAND)) {
503 /*
504 * There is a valid object.
505 * Decrement the reference count by one to balance the
506 * increment when the object was stored.
507 */
508 acpi_ut_remove_reference(object);
509 }
510
511 return_VOID;
512}
513
514/*******************************************************************************
515 *
516 * FUNCTION: acpi_ds_store_object_to_local
517 *
518 * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
519 * ACPI_REFCLASS_ARG
520 * Index - Which Local or Arg to set
521 * obj_desc - Value to be stored
522 * walk_state - Current walk state
523 *
524 * RETURN: Status
525 *
526 * DESCRIPTION: Store a value in an Arg or Local. The obj_desc is installed
527 * as the new value for the Arg or Local and the reference count
528 * for obj_desc is incremented.
529 *
530 ******************************************************************************/
531
532acpi_status
533acpi_ds_store_object_to_local(u8 type,
534 u32 index,
535 union acpi_operand_object *obj_desc,
536 struct acpi_walk_state *walk_state)
537{
538 acpi_status status;
539 struct acpi_namespace_node *node;
540 union acpi_operand_object *current_obj_desc;
541 union acpi_operand_object *new_obj_desc;
542
543 ACPI_FUNCTION_TRACE(ds_store_object_to_local);
544 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Type=%2.2X Index=%u Obj=%p\n",
545 type, index, obj_desc));
546
547 /* Parameter validation */
548
549 if (!obj_desc) {
550 return_ACPI_STATUS(AE_BAD_PARAMETER);
551 }
552
553 /* Get the namespace node for the arg/local */
554
555 status = acpi_ds_method_data_get_node(type, index, walk_state, &node);
556 if (ACPI_FAILURE(status)) {
557 return_ACPI_STATUS(status);
558 }
559
560 current_obj_desc = acpi_ns_get_attached_object(node);
561 if (current_obj_desc == obj_desc) {
562 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Obj=%p already installed!\n",
563 obj_desc));
564 return_ACPI_STATUS(status);
565 }
566
567 /*
568 * If the reference count on the object is more than one, we must
569 * take a copy of the object before we store. A reference count
570 * of exactly 1 means that the object was just created during the
571 * evaluation of an expression, and we can safely use it since it
572 * is not used anywhere else.
573 */
574 new_obj_desc = obj_desc;
575 if (obj_desc->common.reference_count > 1) {
576 status =
577 acpi_ut_copy_iobject_to_iobject(obj_desc, &new_obj_desc,
578 walk_state);
579 if (ACPI_FAILURE(status)) {
580 return_ACPI_STATUS(status);
581 }
582 }
583
584 /*
585 * If there is an object already in this slot, we either
586 * have to delete it, or if this is an argument and there
587 * is an object reference stored there, we have to do
588 * an indirect store!
589 */
590 if (current_obj_desc) {
591 /*
592 * Check for an indirect store if an argument
593 * contains an object reference (stored as an Node).
594 * We don't allow this automatic dereferencing for
595 * locals, since a store to a local should overwrite
596 * anything there, including an object reference.
597 *
598 * If both Arg0 and Local0 contain ref_of (Local4):
599 *
600 * Store (1, Arg0) - Causes indirect store to local4
601 * Store (1, Local0) - Stores 1 in local0, overwriting
602 * the reference to local4
603 * Store (1, de_refof (Local0)) - Causes indirect store to local4
604 *
605 * Weird, but true.
606 */
607 if (type == ACPI_REFCLASS_ARG) {
608 /*
609 * If we have a valid reference object that came from ref_of(),
610 * do the indirect store
611 */
612 if ((ACPI_GET_DESCRIPTOR_TYPE(current_obj_desc) ==
613 ACPI_DESC_TYPE_OPERAND)
614 && (current_obj_desc->common.type ==
615 ACPI_TYPE_LOCAL_REFERENCE)
616 && (current_obj_desc->reference.class ==
617 ACPI_REFCLASS_REFOF)) {
618 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
619 "Arg (%p) is an ObjRef(Node), storing in node %p\n",
620 new_obj_desc,
621 current_obj_desc));
622
623 /*
624 * Store this object to the Node (perform the indirect store)
625 * NOTE: No implicit conversion is performed, as per the ACPI
626 * specification rules on storing to Locals/Args.
627 */
628 status =
629 acpi_ex_store_object_to_node(new_obj_desc,
630 current_obj_desc->
631 reference.
632 object,
633 walk_state,
634 ACPI_NO_IMPLICIT_CONVERSION);
635
636 /* Remove local reference if we copied the object above */
637
638 if (new_obj_desc != obj_desc) {
639 acpi_ut_remove_reference(new_obj_desc);
640 }
641 return_ACPI_STATUS(status);
642 }
643 }
644
645 /* Delete the existing object before storing the new one */
646
647 acpi_ds_method_data_delete_value(type, index, walk_state);
648 }
649
650 /*
651 * Install the Obj descriptor (*new_obj_desc) into
652 * the descriptor for the Arg or Local.
653 * (increments the object reference count by one)
654 */
655 status =
656 acpi_ds_method_data_set_value(type, index, new_obj_desc,
657 walk_state);
658
659 /* Remove local reference if we copied the object above */
660
661 if (new_obj_desc != obj_desc) {
662 acpi_ut_remove_reference(new_obj_desc);
663 }
664
665 return_ACPI_STATUS(status);
666}
667
668#ifdef ACPI_OBSOLETE_FUNCTIONS
669/*******************************************************************************
670 *
671 * FUNCTION: acpi_ds_method_data_get_type
672 *
673 * PARAMETERS: Opcode - Either AML_LOCAL_OP or AML_ARG_OP
674 * Index - Which Local or Arg whose type to get
675 * walk_state - Current walk state object
676 *
677 * RETURN: Data type of current value of the selected Arg or Local
678 *
679 * DESCRIPTION: Get the type of the object stored in the Local or Arg
680 *
681 ******************************************************************************/
682
683acpi_object_type
684acpi_ds_method_data_get_type(u16 opcode,
685 u32 index, struct acpi_walk_state *walk_state)
686{
687 acpi_status status;
688 struct acpi_namespace_node *node;
689 union acpi_operand_object *object;
690
691 ACPI_FUNCTION_TRACE(ds_method_data_get_type);
692
693 /* Get the namespace node for the arg/local */
694
695 status = acpi_ds_method_data_get_node(opcode, index, walk_state, &node);
696 if (ACPI_FAILURE(status)) {
697 return_VALUE((ACPI_TYPE_NOT_FOUND));
698 }
699
700 /* Get the object */
701
702 object = acpi_ns_get_attached_object(node);
703 if (!object) {
704
705 /* Uninitialized local/arg, return TYPE_ANY */
706
707 return_VALUE(ACPI_TYPE_ANY);
708 }
709
710 /* Get the object type */
711
712 return_VALUE(object->type);
713}
714#endif
1// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
2/*******************************************************************************
3 *
4 * Module Name: dsmthdat - control method arguments and local variables
5 *
6 ******************************************************************************/
7
8#include <acpi/acpi.h>
9#include "accommon.h"
10#include "acdispat.h"
11#include "acnamesp.h"
12#include "acinterp.h"
13
14#define _COMPONENT ACPI_DISPATCHER
15ACPI_MODULE_NAME("dsmthdat")
16
17/* Local prototypes */
18static void
19acpi_ds_method_data_delete_value(u8 type,
20 u32 index, struct acpi_walk_state *walk_state);
21
22static acpi_status
23acpi_ds_method_data_set_value(u8 type,
24 u32 index,
25 union acpi_operand_object *object,
26 struct acpi_walk_state *walk_state);
27
28#ifdef ACPI_OBSOLETE_FUNCTIONS
29acpi_object_type
30acpi_ds_method_data_get_type(u16 opcode,
31 u32 index, struct acpi_walk_state *walk_state);
32#endif
33
34/*******************************************************************************
35 *
36 * FUNCTION: acpi_ds_method_data_init
37 *
38 * PARAMETERS: walk_state - Current walk state object
39 *
40 * RETURN: Status
41 *
42 * DESCRIPTION: Initialize the data structures that hold the method's arguments
43 * and locals. The data struct is an array of namespace nodes for
44 * each - this allows ref_of and de_ref_of to work properly for these
45 * special data types.
46 *
47 * NOTES: walk_state fields are initialized to zero by the
48 * ACPI_ALLOCATE_ZEROED().
49 *
50 * A pseudo-Namespace Node is assigned to each argument and local
51 * so that ref_of() can return a pointer to the Node.
52 *
53 ******************************************************************************/
54
55void acpi_ds_method_data_init(struct acpi_walk_state *walk_state)
56{
57 u32 i;
58
59 ACPI_FUNCTION_TRACE(ds_method_data_init);
60
61 /* Init the method arguments */
62
63 for (i = 0; i < ACPI_METHOD_NUM_ARGS; i++) {
64 ACPI_MOVE_32_TO_32(&walk_state->arguments[i].name,
65 NAMEOF_ARG_NTE);
66
67 walk_state->arguments[i].name.integer |= (i << 24);
68 walk_state->arguments[i].descriptor_type = ACPI_DESC_TYPE_NAMED;
69 walk_state->arguments[i].type = ACPI_TYPE_ANY;
70 walk_state->arguments[i].flags = ANOBJ_METHOD_ARG;
71 }
72
73 /* Init the method locals */
74
75 for (i = 0; i < ACPI_METHOD_NUM_LOCALS; i++) {
76 ACPI_MOVE_32_TO_32(&walk_state->local_variables[i].name,
77 NAMEOF_LOCAL_NTE);
78
79 walk_state->local_variables[i].name.integer |= (i << 24);
80 walk_state->local_variables[i].descriptor_type =
81 ACPI_DESC_TYPE_NAMED;
82 walk_state->local_variables[i].type = ACPI_TYPE_ANY;
83 walk_state->local_variables[i].flags = ANOBJ_METHOD_LOCAL;
84 }
85
86 return_VOID;
87}
88
89/*******************************************************************************
90 *
91 * FUNCTION: acpi_ds_method_data_delete_all
92 *
93 * PARAMETERS: walk_state - Current walk state object
94 *
95 * RETURN: None
96 *
97 * DESCRIPTION: Delete method locals and arguments. Arguments are only
98 * deleted if this method was called from another method.
99 *
100 ******************************************************************************/
101
102void acpi_ds_method_data_delete_all(struct acpi_walk_state *walk_state)
103{
104 u32 index;
105
106 ACPI_FUNCTION_TRACE(ds_method_data_delete_all);
107
108 /* Detach the locals */
109
110 for (index = 0; index < ACPI_METHOD_NUM_LOCALS; index++) {
111 if (walk_state->local_variables[index].object) {
112 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Deleting Local%u=%p\n",
113 index,
114 walk_state->local_variables[index].
115 object));
116
117 /* Detach object (if present) and remove a reference */
118
119 acpi_ns_detach_object(&walk_state->
120 local_variables[index]);
121 }
122 }
123
124 /* Detach the arguments */
125
126 for (index = 0; index < ACPI_METHOD_NUM_ARGS; index++) {
127 if (walk_state->arguments[index].object) {
128 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Deleting Arg%u=%p\n",
129 index,
130 walk_state->arguments[index].object));
131
132 /* Detach object (if present) and remove a reference */
133
134 acpi_ns_detach_object(&walk_state->arguments[index]);
135 }
136 }
137
138 return_VOID;
139}
140
141/*******************************************************************************
142 *
143 * FUNCTION: acpi_ds_method_data_init_args
144 *
145 * PARAMETERS: *params - Pointer to a parameter list for the method
146 * max_param_count - The arg count for this method
147 * walk_state - Current walk state object
148 *
149 * RETURN: Status
150 *
151 * DESCRIPTION: Initialize arguments for a method. The parameter list is a list
152 * of ACPI operand objects, either null terminated or whose length
153 * is defined by max_param_count.
154 *
155 ******************************************************************************/
156
157acpi_status
158acpi_ds_method_data_init_args(union acpi_operand_object **params,
159 u32 max_param_count,
160 struct acpi_walk_state *walk_state)
161{
162 acpi_status status;
163 u32 index = 0;
164
165 ACPI_FUNCTION_TRACE_PTR(ds_method_data_init_args, params);
166
167 if (!params) {
168 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
169 "No parameter list passed to method\n"));
170 return_ACPI_STATUS(AE_OK);
171 }
172
173 /* Copy passed parameters into the new method stack frame */
174
175 while ((index < ACPI_METHOD_NUM_ARGS) &&
176 (index < max_param_count) && params[index]) {
177 /*
178 * A valid parameter.
179 * Store the argument in the method/walk descriptor.
180 * Do not copy the arg in order to implement call by reference
181 */
182 status =
183 acpi_ds_method_data_set_value(ACPI_REFCLASS_ARG, index,
184 params[index], walk_state);
185 if (ACPI_FAILURE(status)) {
186 return_ACPI_STATUS(status);
187 }
188
189 index++;
190 }
191
192 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%u args passed to method\n", index));
193 return_ACPI_STATUS(AE_OK);
194}
195
196/*******************************************************************************
197 *
198 * FUNCTION: acpi_ds_method_data_get_node
199 *
200 * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
201 * ACPI_REFCLASS_ARG
202 * index - Which Local or Arg whose type to get
203 * walk_state - Current walk state object
204 * node - Where the node is returned.
205 *
206 * RETURN: Status and node
207 *
208 * DESCRIPTION: Get the Node associated with a local or arg.
209 *
210 ******************************************************************************/
211
212acpi_status
213acpi_ds_method_data_get_node(u8 type,
214 u32 index,
215 struct acpi_walk_state *walk_state,
216 struct acpi_namespace_node **node)
217{
218 ACPI_FUNCTION_TRACE(ds_method_data_get_node);
219
220 /*
221 * Method Locals and Arguments are supported
222 */
223 switch (type) {
224 case ACPI_REFCLASS_LOCAL:
225
226 if (index > ACPI_METHOD_MAX_LOCAL) {
227 ACPI_ERROR((AE_INFO,
228 "Local index %u is invalid (max %u)",
229 index, ACPI_METHOD_MAX_LOCAL));
230 return_ACPI_STATUS(AE_AML_INVALID_INDEX);
231 }
232
233 /* Return a pointer to the pseudo-node */
234
235 *node = &walk_state->local_variables[index];
236 break;
237
238 case ACPI_REFCLASS_ARG:
239
240 if (index > ACPI_METHOD_MAX_ARG) {
241 ACPI_ERROR((AE_INFO,
242 "Arg index %u is invalid (max %u)",
243 index, ACPI_METHOD_MAX_ARG));
244 return_ACPI_STATUS(AE_AML_INVALID_INDEX);
245 }
246
247 /* Return a pointer to the pseudo-node */
248
249 *node = &walk_state->arguments[index];
250 break;
251
252 default:
253
254 ACPI_ERROR((AE_INFO, "Type %u is invalid", type));
255 return_ACPI_STATUS(AE_TYPE);
256 }
257
258 return_ACPI_STATUS(AE_OK);
259}
260
261/*******************************************************************************
262 *
263 * FUNCTION: acpi_ds_method_data_set_value
264 *
265 * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
266 * ACPI_REFCLASS_ARG
267 * index - Which Local or Arg to get
268 * object - Object to be inserted into the stack entry
269 * walk_state - Current walk state object
270 *
271 * RETURN: Status
272 *
273 * DESCRIPTION: Insert an object onto the method stack at entry Opcode:Index.
274 * Note: There is no "implicit conversion" for locals.
275 *
276 ******************************************************************************/
277
278static acpi_status
279acpi_ds_method_data_set_value(u8 type,
280 u32 index,
281 union acpi_operand_object *object,
282 struct acpi_walk_state *walk_state)
283{
284 acpi_status status;
285 struct acpi_namespace_node *node;
286
287 ACPI_FUNCTION_TRACE(ds_method_data_set_value);
288
289 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
290 "NewObj %p Type %2.2X, Refs=%u [%s]\n", object,
291 type, object->common.reference_count,
292 acpi_ut_get_type_name(object->common.type)));
293
294 /* Get the namespace node for the arg/local */
295
296 status = acpi_ds_method_data_get_node(type, index, walk_state, &node);
297 if (ACPI_FAILURE(status)) {
298 return_ACPI_STATUS(status);
299 }
300
301 /*
302 * Increment ref count so object can't be deleted while installed.
303 * NOTE: We do not copy the object in order to preserve the call by
304 * reference semantics of ACPI Control Method invocation.
305 * (See ACPI Specification 2.0C)
306 */
307 acpi_ut_add_reference(object);
308
309 /* Install the object */
310
311 node->object = object;
312 return_ACPI_STATUS(status);
313}
314
315/*******************************************************************************
316 *
317 * FUNCTION: acpi_ds_method_data_get_value
318 *
319 * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
320 * ACPI_REFCLASS_ARG
321 * index - Which localVar or argument to get
322 * walk_state - Current walk state object
323 * dest_desc - Where Arg or Local value is returned
324 *
325 * RETURN: Status
326 *
327 * DESCRIPTION: Retrieve value of selected Arg or Local for this method
328 * Used only in acpi_ex_resolve_to_value().
329 *
330 ******************************************************************************/
331
332acpi_status
333acpi_ds_method_data_get_value(u8 type,
334 u32 index,
335 struct acpi_walk_state *walk_state,
336 union acpi_operand_object **dest_desc)
337{
338 acpi_status status;
339 struct acpi_namespace_node *node;
340 union acpi_operand_object *object;
341
342 ACPI_FUNCTION_TRACE(ds_method_data_get_value);
343
344 /* Validate the object descriptor */
345
346 if (!dest_desc) {
347 ACPI_ERROR((AE_INFO, "Null object descriptor pointer"));
348 return_ACPI_STATUS(AE_BAD_PARAMETER);
349 }
350
351 /* Get the namespace node for the arg/local */
352
353 status = acpi_ds_method_data_get_node(type, index, walk_state, &node);
354 if (ACPI_FAILURE(status)) {
355 return_ACPI_STATUS(status);
356 }
357
358 /* Get the object from the node */
359
360 object = node->object;
361
362 /* Examine the returned object, it must be valid. */
363
364 if (!object) {
365 /*
366 * Index points to uninitialized object.
367 * This means that either 1) The expected argument was
368 * not passed to the method, or 2) A local variable
369 * was referenced by the method (via the ASL)
370 * before it was initialized. Either case is an error.
371 */
372
373 /* If slack enabled, init the local_x/arg_x to an Integer of value zero */
374
375 if (acpi_gbl_enable_interpreter_slack) {
376 object = acpi_ut_create_integer_object((u64) 0);
377 if (!object) {
378 return_ACPI_STATUS(AE_NO_MEMORY);
379 }
380
381 node->object = object;
382 }
383
384 /* Otherwise, return the error */
385
386 else
387 switch (type) {
388 case ACPI_REFCLASS_ARG:
389
390 ACPI_ERROR((AE_INFO,
391 "Uninitialized Arg[%u] at node %p",
392 index, node));
393
394 return_ACPI_STATUS(AE_AML_UNINITIALIZED_ARG);
395
396 case ACPI_REFCLASS_LOCAL:
397 /*
398 * No error message for this case, will be trapped again later to
399 * detect and ignore cases of Store(local_x,local_x)
400 */
401 return_ACPI_STATUS(AE_AML_UNINITIALIZED_LOCAL);
402
403 default:
404
405 ACPI_ERROR((AE_INFO,
406 "Not a Arg/Local opcode: 0x%X",
407 type));
408 return_ACPI_STATUS(AE_AML_INTERNAL);
409 }
410 }
411
412 /*
413 * The Index points to an initialized and valid object.
414 * Return an additional reference to the object
415 */
416 *dest_desc = object;
417 acpi_ut_add_reference(object);
418
419 return_ACPI_STATUS(AE_OK);
420}
421
422/*******************************************************************************
423 *
424 * FUNCTION: acpi_ds_method_data_delete_value
425 *
426 * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
427 * ACPI_REFCLASS_ARG
428 * index - Which localVar or argument to delete
429 * walk_state - Current walk state object
430 *
431 * RETURN: None
432 *
433 * DESCRIPTION: Delete the entry at Opcode:Index. Inserts
434 * a null into the stack slot after the object is deleted.
435 *
436 ******************************************************************************/
437
438static void
439acpi_ds_method_data_delete_value(u8 type,
440 u32 index, struct acpi_walk_state *walk_state)
441{
442 acpi_status status;
443 struct acpi_namespace_node *node;
444 union acpi_operand_object *object;
445
446 ACPI_FUNCTION_TRACE(ds_method_data_delete_value);
447
448 /* Get the namespace node for the arg/local */
449
450 status = acpi_ds_method_data_get_node(type, index, walk_state, &node);
451 if (ACPI_FAILURE(status)) {
452 return_VOID;
453 }
454
455 /* Get the associated object */
456
457 object = acpi_ns_get_attached_object(node);
458
459 /*
460 * Undefine the Arg or Local by setting its descriptor
461 * pointer to NULL. Locals/Args can contain both
462 * ACPI_OPERAND_OBJECTS and ACPI_NAMESPACE_NODEs
463 */
464 node->object = NULL;
465
466 if ((object) &&
467 (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_OPERAND)) {
468 /*
469 * There is a valid object.
470 * Decrement the reference count by one to balance the
471 * increment when the object was stored.
472 */
473 acpi_ut_remove_reference(object);
474 }
475
476 return_VOID;
477}
478
479/*******************************************************************************
480 *
481 * FUNCTION: acpi_ds_store_object_to_local
482 *
483 * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
484 * ACPI_REFCLASS_ARG
485 * index - Which Local or Arg to set
486 * obj_desc - Value to be stored
487 * walk_state - Current walk state
488 *
489 * RETURN: Status
490 *
491 * DESCRIPTION: Store a value in an Arg or Local. The obj_desc is installed
492 * as the new value for the Arg or Local and the reference count
493 * for obj_desc is incremented.
494 *
495 ******************************************************************************/
496
497acpi_status
498acpi_ds_store_object_to_local(u8 type,
499 u32 index,
500 union acpi_operand_object *obj_desc,
501 struct acpi_walk_state *walk_state)
502{
503 acpi_status status;
504 struct acpi_namespace_node *node;
505 union acpi_operand_object *current_obj_desc;
506 union acpi_operand_object *new_obj_desc;
507
508 ACPI_FUNCTION_TRACE(ds_store_object_to_local);
509 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Type=%2.2X Index=%u Obj=%p\n",
510 type, index, obj_desc));
511
512 /* Parameter validation */
513
514 if (!obj_desc) {
515 return_ACPI_STATUS(AE_BAD_PARAMETER);
516 }
517
518 /* Get the namespace node for the arg/local */
519
520 status = acpi_ds_method_data_get_node(type, index, walk_state, &node);
521 if (ACPI_FAILURE(status)) {
522 return_ACPI_STATUS(status);
523 }
524
525 current_obj_desc = acpi_ns_get_attached_object(node);
526 if (current_obj_desc == obj_desc) {
527 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Obj=%p already installed!\n",
528 obj_desc));
529 return_ACPI_STATUS(status);
530 }
531
532 /*
533 * If the reference count on the object is more than one, we must
534 * take a copy of the object before we store. A reference count
535 * of exactly 1 means that the object was just created during the
536 * evaluation of an expression, and we can safely use it since it
537 * is not used anywhere else.
538 */
539 new_obj_desc = obj_desc;
540 if (obj_desc->common.reference_count > 1) {
541 status =
542 acpi_ut_copy_iobject_to_iobject(obj_desc, &new_obj_desc,
543 walk_state);
544 if (ACPI_FAILURE(status)) {
545 return_ACPI_STATUS(status);
546 }
547 }
548
549 /*
550 * If there is an object already in this slot, we either
551 * have to delete it, or if this is an argument and there
552 * is an object reference stored there, we have to do
553 * an indirect store!
554 */
555 if (current_obj_desc) {
556 /*
557 * Check for an indirect store if an argument
558 * contains an object reference (stored as an Node).
559 * We don't allow this automatic dereferencing for
560 * locals, since a store to a local should overwrite
561 * anything there, including an object reference.
562 *
563 * If both Arg0 and Local0 contain ref_of (Local4):
564 *
565 * Store (1, Arg0) - Causes indirect store to local4
566 * Store (1, Local0) - Stores 1 in local0, overwriting
567 * the reference to local4
568 * Store (1, de_refof (Local0)) - Causes indirect store to local4
569 *
570 * Weird, but true.
571 */
572 if (type == ACPI_REFCLASS_ARG) {
573 /*
574 * If we have a valid reference object that came from ref_of(),
575 * do the indirect store
576 */
577 if ((ACPI_GET_DESCRIPTOR_TYPE(current_obj_desc) ==
578 ACPI_DESC_TYPE_OPERAND) &&
579 (current_obj_desc->common.type ==
580 ACPI_TYPE_LOCAL_REFERENCE) &&
581 (current_obj_desc->reference.class ==
582 ACPI_REFCLASS_REFOF)) {
583 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
584 "Arg (%p) is an ObjRef(Node), storing in node %p\n",
585 new_obj_desc,
586 current_obj_desc));
587
588 /*
589 * Store this object to the Node (perform the indirect store)
590 * NOTE: No implicit conversion is performed, as per the ACPI
591 * specification rules on storing to Locals/Args.
592 */
593 status =
594 acpi_ex_store_object_to_node(new_obj_desc,
595 current_obj_desc->
596 reference.
597 object,
598 walk_state,
599 ACPI_NO_IMPLICIT_CONVERSION);
600
601 /* Remove local reference if we copied the object above */
602
603 if (new_obj_desc != obj_desc) {
604 acpi_ut_remove_reference(new_obj_desc);
605 }
606
607 return_ACPI_STATUS(status);
608 }
609 }
610
611 /* Delete the existing object before storing the new one */
612
613 acpi_ds_method_data_delete_value(type, index, walk_state);
614 }
615
616 /*
617 * Install the Obj descriptor (*new_obj_desc) into
618 * the descriptor for the Arg or Local.
619 * (increments the object reference count by one)
620 */
621 status =
622 acpi_ds_method_data_set_value(type, index, new_obj_desc,
623 walk_state);
624
625 /* Remove local reference if we copied the object above */
626
627 if (new_obj_desc != obj_desc) {
628 acpi_ut_remove_reference(new_obj_desc);
629 }
630
631 return_ACPI_STATUS(status);
632}
633
634#ifdef ACPI_OBSOLETE_FUNCTIONS
635/*******************************************************************************
636 *
637 * FUNCTION: acpi_ds_method_data_get_type
638 *
639 * PARAMETERS: opcode - Either AML_FIRST LOCAL_OP or
640 * AML_FIRST_ARG_OP
641 * index - Which Local or Arg whose type to get
642 * walk_state - Current walk state object
643 *
644 * RETURN: Data type of current value of the selected Arg or Local
645 *
646 * DESCRIPTION: Get the type of the object stored in the Local or Arg
647 *
648 ******************************************************************************/
649
650acpi_object_type
651acpi_ds_method_data_get_type(u16 opcode,
652 u32 index, struct acpi_walk_state *walk_state)
653{
654 acpi_status status;
655 struct acpi_namespace_node *node;
656 union acpi_operand_object *object;
657
658 ACPI_FUNCTION_TRACE(ds_method_data_get_type);
659
660 /* Get the namespace node for the arg/local */
661
662 status = acpi_ds_method_data_get_node(opcode, index, walk_state, &node);
663 if (ACPI_FAILURE(status)) {
664 return_VALUE((ACPI_TYPE_NOT_FOUND));
665 }
666
667 /* Get the object */
668
669 object = acpi_ns_get_attached_object(node);
670 if (!object) {
671
672 /* Uninitialized local/arg, return TYPE_ANY */
673
674 return_VALUE(ACPI_TYPE_ANY);
675 }
676
677 /* Get the object type */
678
679 return_VALUE(object->type);
680}
681#endif