Loading...
Note: File does not exist in v3.5.6.
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * leon_pci_grpci1.c: GRPCI1 Host PCI driver
4 *
5 * Copyright (C) 2013 Aeroflex Gaisler AB
6 *
7 * This GRPCI1 driver does not support PCI interrupts taken from
8 * GPIO pins. Interrupt generation at PCI parity and system error
9 * detection is by default turned off since some GRPCI1 cores does
10 * not support detection. It can be turned on from the bootloader
11 * using the all_pci_errors property.
12 *
13 * Contributors: Daniel Hellstrom <daniel@gaisler.com>
14 */
15
16#include <linux/of_device.h>
17#include <linux/export.h>
18#include <linux/kernel.h>
19#include <linux/of_irq.h>
20#include <linux/delay.h>
21#include <linux/pci.h>
22
23#include <asm/leon_pci.h>
24#include <asm/sections.h>
25#include <asm/vaddrs.h>
26#include <asm/leon.h>
27#include <asm/io.h>
28
29#include "irq.h"
30
31/* Enable/Disable Debugging Configuration Space Access */
32#undef GRPCI1_DEBUG_CFGACCESS
33
34/*
35 * GRPCI1 APB Register MAP
36 */
37struct grpci1_regs {
38 unsigned int cfg_stat; /* 0x00 Configuration / Status */
39 unsigned int bar0; /* 0x04 BAR0 (RO) */
40 unsigned int page0; /* 0x08 PAGE0 (RO) */
41 unsigned int bar1; /* 0x0C BAR1 (RO) */
42 unsigned int page1; /* 0x10 PAGE1 */
43 unsigned int iomap; /* 0x14 IO Map */
44 unsigned int stat_cmd; /* 0x18 PCI Status & Command (RO) */
45 unsigned int irq; /* 0x1C Interrupt register */
46};
47
48#define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a))))
49#define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a)))
50
51#define PAGE0_BTEN_BIT 0
52#define PAGE0_BTEN (1 << PAGE0_BTEN_BIT)
53
54#define CFGSTAT_HOST_BIT 13
55#define CFGSTAT_CTO_BIT 8
56#define CFGSTAT_HOST (1 << CFGSTAT_HOST_BIT)
57#define CFGSTAT_CTO (1 << CFGSTAT_CTO_BIT)
58
59#define IRQ_DPE (1 << 9)
60#define IRQ_SSE (1 << 8)
61#define IRQ_RMA (1 << 7)
62#define IRQ_RTA (1 << 6)
63#define IRQ_STA (1 << 5)
64#define IRQ_DPED (1 << 4)
65#define IRQ_INTD (1 << 3)
66#define IRQ_INTC (1 << 2)
67#define IRQ_INTB (1 << 1)
68#define IRQ_INTA (1 << 0)
69#define IRQ_DEF_ERRORS (IRQ_RMA | IRQ_RTA | IRQ_STA)
70#define IRQ_ALL_ERRORS (IRQ_DPED | IRQ_DEF_ERRORS | IRQ_SSE | IRQ_DPE)
71#define IRQ_INTX (IRQ_INTA | IRQ_INTB | IRQ_INTC | IRQ_INTD)
72#define IRQ_MASK_BIT 16
73
74#define DEF_PCI_ERRORS (PCI_STATUS_SIG_TARGET_ABORT | \
75 PCI_STATUS_REC_TARGET_ABORT | \
76 PCI_STATUS_REC_MASTER_ABORT)
77#define ALL_PCI_ERRORS (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY | \
78 PCI_STATUS_SIG_SYSTEM_ERROR | DEF_PCI_ERRORS)
79
80#define TGT 256
81
82struct grpci1_priv {
83 struct leon_pci_info info; /* must be on top of this structure */
84 struct grpci1_regs __iomem *regs; /* GRPCI register map */
85 struct device *dev;
86 int pci_err_mask; /* STATUS register error mask */
87 int irq; /* LEON irqctrl GRPCI IRQ */
88 unsigned char irq_map[4]; /* GRPCI nexus PCI INTX# IRQs */
89 unsigned int irq_err; /* GRPCI nexus Virt Error IRQ */
90
91 /* AHB PCI Windows */
92 unsigned long pci_area; /* MEMORY */
93 unsigned long pci_area_end;
94 unsigned long pci_io; /* I/O */
95 unsigned long pci_conf; /* CONFIGURATION */
96 unsigned long pci_conf_end;
97 unsigned long pci_io_va;
98};
99
100static struct grpci1_priv *grpci1priv;
101
102static int grpci1_cfg_w32(struct grpci1_priv *priv, unsigned int bus,
103 unsigned int devfn, int where, u32 val);
104
105static int grpci1_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
106{
107 struct grpci1_priv *priv = dev->bus->sysdata;
108 int irq_group;
109
110 /* Use default IRQ decoding on PCI BUS0 according slot numbering */
111 irq_group = slot & 0x3;
112 pin = ((pin - 1) + irq_group) & 0x3;
113
114 return priv->irq_map[pin];
115}
116
117static int grpci1_cfg_r32(struct grpci1_priv *priv, unsigned int bus,
118 unsigned int devfn, int where, u32 *val)
119{
120 u32 *pci_conf, tmp, cfg;
121
122 if (where & 0x3)
123 return -EINVAL;
124
125 if (bus == 0) {
126 devfn += (0x8 * 6); /* start at AD16=Device0 */
127 } else if (bus == TGT) {
128 bus = 0;
129 devfn = 0; /* special case: bridge controller itself */
130 }
131
132 /* Select bus */
133 cfg = REGLOAD(priv->regs->cfg_stat);
134 REGSTORE(priv->regs->cfg_stat, (cfg & ~(0xf << 23)) | (bus << 23));
135
136 /* do read access */
137 pci_conf = (u32 *) (priv->pci_conf | (devfn << 8) | (where & 0xfc));
138 tmp = LEON3_BYPASS_LOAD_PA(pci_conf);
139
140 /* check if master abort was received */
141 if (REGLOAD(priv->regs->cfg_stat) & CFGSTAT_CTO) {
142 *val = 0xffffffff;
143 /* Clear Master abort bit in PCI cfg space (is set) */
144 tmp = REGLOAD(priv->regs->stat_cmd);
145 grpci1_cfg_w32(priv, TGT, 0, PCI_COMMAND, tmp);
146 } else {
147 /* Bus always little endian (unaffected by byte-swapping) */
148 *val = swab32(tmp);
149 }
150
151 return 0;
152}
153
154static int grpci1_cfg_r16(struct grpci1_priv *priv, unsigned int bus,
155 unsigned int devfn, int where, u32 *val)
156{
157 u32 v;
158 int ret;
159
160 if (where & 0x1)
161 return -EINVAL;
162 ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
163 *val = 0xffff & (v >> (8 * (where & 0x3)));
164 return ret;
165}
166
167static int grpci1_cfg_r8(struct grpci1_priv *priv, unsigned int bus,
168 unsigned int devfn, int where, u32 *val)
169{
170 u32 v;
171 int ret;
172
173 ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
174 *val = 0xff & (v >> (8 * (where & 3)));
175
176 return ret;
177}
178
179static int grpci1_cfg_w32(struct grpci1_priv *priv, unsigned int bus,
180 unsigned int devfn, int where, u32 val)
181{
182 unsigned int *pci_conf;
183 u32 cfg;
184
185 if (where & 0x3)
186 return -EINVAL;
187
188 if (bus == 0) {
189 devfn += (0x8 * 6); /* start at AD16=Device0 */
190 } else if (bus == TGT) {
191 bus = 0;
192 devfn = 0; /* special case: bridge controller itself */
193 }
194
195 /* Select bus */
196 cfg = REGLOAD(priv->regs->cfg_stat);
197 REGSTORE(priv->regs->cfg_stat, (cfg & ~(0xf << 23)) | (bus << 23));
198
199 pci_conf = (unsigned int *) (priv->pci_conf |
200 (devfn << 8) | (where & 0xfc));
201 LEON3_BYPASS_STORE_PA(pci_conf, swab32(val));
202
203 return 0;
204}
205
206static int grpci1_cfg_w16(struct grpci1_priv *priv, unsigned int bus,
207 unsigned int devfn, int where, u32 val)
208{
209 int ret;
210 u32 v;
211
212 if (where & 0x1)
213 return -EINVAL;
214 ret = grpci1_cfg_r32(priv, bus, devfn, where&~3, &v);
215 if (ret)
216 return ret;
217 v = (v & ~(0xffff << (8 * (where & 0x3)))) |
218 ((0xffff & val) << (8 * (where & 0x3)));
219 return grpci1_cfg_w32(priv, bus, devfn, where & ~0x3, v);
220}
221
222static int grpci1_cfg_w8(struct grpci1_priv *priv, unsigned int bus,
223 unsigned int devfn, int where, u32 val)
224{
225 int ret;
226 u32 v;
227
228 ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
229 if (ret != 0)
230 return ret;
231 v = (v & ~(0xff << (8 * (where & 0x3)))) |
232 ((0xff & val) << (8 * (where & 0x3)));
233 return grpci1_cfg_w32(priv, bus, devfn, where & ~0x3, v);
234}
235
236/* Read from Configuration Space. When entering here the PCI layer has taken
237 * the pci_lock spinlock and IRQ is off.
238 */
239static int grpci1_read_config(struct pci_bus *bus, unsigned int devfn,
240 int where, int size, u32 *val)
241{
242 struct grpci1_priv *priv = grpci1priv;
243 unsigned int busno = bus->number;
244 int ret;
245
246 if (PCI_SLOT(devfn) > 15 || busno > 15) {
247 *val = ~0;
248 return 0;
249 }
250
251 switch (size) {
252 case 1:
253 ret = grpci1_cfg_r8(priv, busno, devfn, where, val);
254 break;
255 case 2:
256 ret = grpci1_cfg_r16(priv, busno, devfn, where, val);
257 break;
258 case 4:
259 ret = grpci1_cfg_r32(priv, busno, devfn, where, val);
260 break;
261 default:
262 ret = -EINVAL;
263 break;
264 }
265
266#ifdef GRPCI1_DEBUG_CFGACCESS
267 printk(KERN_INFO
268 "grpci1_read_config: [%02x:%02x:%x] ofs=%d val=%x size=%d\n",
269 busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where, *val, size);
270#endif
271
272 return ret;
273}
274
275/* Write to Configuration Space. When entering here the PCI layer has taken
276 * the pci_lock spinlock and IRQ is off.
277 */
278static int grpci1_write_config(struct pci_bus *bus, unsigned int devfn,
279 int where, int size, u32 val)
280{
281 struct grpci1_priv *priv = grpci1priv;
282 unsigned int busno = bus->number;
283
284 if (PCI_SLOT(devfn) > 15 || busno > 15)
285 return 0;
286
287#ifdef GRPCI1_DEBUG_CFGACCESS
288 printk(KERN_INFO
289 "grpci1_write_config: [%02x:%02x:%x] ofs=%d size=%d val=%x\n",
290 busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
291#endif
292
293 switch (size) {
294 default:
295 return -EINVAL;
296 case 1:
297 return grpci1_cfg_w8(priv, busno, devfn, where, val);
298 case 2:
299 return grpci1_cfg_w16(priv, busno, devfn, where, val);
300 case 4:
301 return grpci1_cfg_w32(priv, busno, devfn, where, val);
302 }
303}
304
305static struct pci_ops grpci1_ops = {
306 .read = grpci1_read_config,
307 .write = grpci1_write_config,
308};
309
310/* GENIRQ IRQ chip implementation for grpci1 irqmode=0..2. In configuration
311 * 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller
312 * this is not needed and the standard IRQ controller can be used.
313 */
314
315static void grpci1_mask_irq(struct irq_data *data)
316{
317 u32 irqidx;
318 struct grpci1_priv *priv = grpci1priv;
319
320 irqidx = (u32)data->chip_data - 1;
321 if (irqidx > 3) /* only mask PCI interrupts here */
322 return;
323 irqidx += IRQ_MASK_BIT;
324
325 REGSTORE(priv->regs->irq, REGLOAD(priv->regs->irq) & ~(1 << irqidx));
326}
327
328static void grpci1_unmask_irq(struct irq_data *data)
329{
330 u32 irqidx;
331 struct grpci1_priv *priv = grpci1priv;
332
333 irqidx = (u32)data->chip_data - 1;
334 if (irqidx > 3) /* only unmask PCI interrupts here */
335 return;
336 irqidx += IRQ_MASK_BIT;
337
338 REGSTORE(priv->regs->irq, REGLOAD(priv->regs->irq) | (1 << irqidx));
339}
340
341static unsigned int grpci1_startup_irq(struct irq_data *data)
342{
343 grpci1_unmask_irq(data);
344 return 0;
345}
346
347static void grpci1_shutdown_irq(struct irq_data *data)
348{
349 grpci1_mask_irq(data);
350}
351
352static struct irq_chip grpci1_irq = {
353 .name = "grpci1",
354 .irq_startup = grpci1_startup_irq,
355 .irq_shutdown = grpci1_shutdown_irq,
356 .irq_mask = grpci1_mask_irq,
357 .irq_unmask = grpci1_unmask_irq,
358};
359
360/* Handle one or multiple IRQs from the PCI core */
361static void grpci1_pci_flow_irq(struct irq_desc *desc)
362{
363 struct grpci1_priv *priv = grpci1priv;
364 int i, ack = 0;
365 unsigned int irqreg;
366
367 irqreg = REGLOAD(priv->regs->irq);
368 irqreg = (irqreg >> IRQ_MASK_BIT) & irqreg;
369
370 /* Error Interrupt? */
371 if (irqreg & IRQ_ALL_ERRORS) {
372 generic_handle_irq(priv->irq_err);
373 ack = 1;
374 }
375
376 /* PCI Interrupt? */
377 if (irqreg & IRQ_INTX) {
378 /* Call respective PCI Interrupt handler */
379 for (i = 0; i < 4; i++) {
380 if (irqreg & (1 << i))
381 generic_handle_irq(priv->irq_map[i]);
382 }
383 ack = 1;
384 }
385
386 /*
387 * Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ
388 * Controller, this must be done after IRQ sources have been handled to
389 * avoid double IRQ generation
390 */
391 if (ack)
392 desc->irq_data.chip->irq_eoi(&desc->irq_data);
393}
394
395/* Create a virtual IRQ */
396static unsigned int grpci1_build_device_irq(unsigned int irq)
397{
398 unsigned int virq = 0, pil;
399
400 pil = 1 << 8;
401 virq = irq_alloc(irq, pil);
402 if (virq == 0)
403 goto out;
404
405 irq_set_chip_and_handler_name(virq, &grpci1_irq, handle_simple_irq,
406 "pcilvl");
407 irq_set_chip_data(virq, (void *)irq);
408
409out:
410 return virq;
411}
412
413/*
414 * Initialize mappings AMBA<->PCI, clear IRQ state, setup PCI interface
415 *
416 * Target BARs:
417 * BAR0: unused in this implementation
418 * BAR1: peripheral DMA to host's memory (size at least 256MByte)
419 * BAR2..BAR5: not implemented in hardware
420 */
421static void grpci1_hw_init(struct grpci1_priv *priv)
422{
423 u32 ahbadr, bar_sz, data, pciadr;
424 struct grpci1_regs __iomem *regs = priv->regs;
425
426 /* set 1:1 mapping between AHB -> PCI memory space */
427 REGSTORE(regs->cfg_stat, priv->pci_area & 0xf0000000);
428
429 /* map PCI accesses to target BAR1 to Linux kernel memory 1:1 */
430 ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN((unsigned long) &_end));
431 REGSTORE(regs->page1, ahbadr);
432
433 /* translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */
434 REGSTORE(regs->iomap, REGLOAD(regs->iomap) & 0x0000ffff);
435
436 /* disable and clear pending interrupts */
437 REGSTORE(regs->irq, 0);
438
439 /* Setup BAR0 outside access range so that it does not conflict with
440 * peripheral DMA. There is no need to set up the PAGE0 register.
441 */
442 grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0, 0xffffffff);
443 grpci1_cfg_r32(priv, TGT, 0, PCI_BASE_ADDRESS_0, &bar_sz);
444 bar_sz = ~bar_sz + 1;
445 pciadr = priv->pci_area - bar_sz;
446 grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0, pciadr);
447
448 /*
449 * Setup the Host's PCI Target BAR1 for other peripherals to access,
450 * and do DMA to the host's memory.
451 */
452 grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_1, ahbadr);
453
454 /*
455 * Setup Latency Timer and cache line size. Default cache line
456 * size will result in poor performance (256 word fetches), 0xff
457 * will set it according to the max size of the PCI FIFO.
458 */
459 grpci1_cfg_w8(priv, TGT, 0, PCI_CACHE_LINE_SIZE, 0xff);
460 grpci1_cfg_w8(priv, TGT, 0, PCI_LATENCY_TIMER, 0x40);
461
462 /* set as bus master, enable pci memory responses, clear status bits */
463 grpci1_cfg_r32(priv, TGT, 0, PCI_COMMAND, &data);
464 data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
465 grpci1_cfg_w32(priv, TGT, 0, PCI_COMMAND, data);
466}
467
468static irqreturn_t grpci1_jump_interrupt(int irq, void *arg)
469{
470 struct grpci1_priv *priv = arg;
471 dev_err(priv->dev, "Jump IRQ happened\n");
472 return IRQ_NONE;
473}
474
475/* Handle GRPCI1 Error Interrupt */
476static irqreturn_t grpci1_err_interrupt(int irq, void *arg)
477{
478 struct grpci1_priv *priv = arg;
479 u32 status;
480
481 grpci1_cfg_r16(priv, TGT, 0, PCI_STATUS, &status);
482 status &= priv->pci_err_mask;
483
484 if (status == 0)
485 return IRQ_NONE;
486
487 if (status & PCI_STATUS_PARITY)
488 dev_err(priv->dev, "Data Parity Error\n");
489
490 if (status & PCI_STATUS_SIG_TARGET_ABORT)
491 dev_err(priv->dev, "Signalled Target Abort\n");
492
493 if (status & PCI_STATUS_REC_TARGET_ABORT)
494 dev_err(priv->dev, "Received Target Abort\n");
495
496 if (status & PCI_STATUS_REC_MASTER_ABORT)
497 dev_err(priv->dev, "Received Master Abort\n");
498
499 if (status & PCI_STATUS_SIG_SYSTEM_ERROR)
500 dev_err(priv->dev, "Signalled System Error\n");
501
502 if (status & PCI_STATUS_DETECTED_PARITY)
503 dev_err(priv->dev, "Parity Error\n");
504
505 /* Clear handled INT TYPE IRQs */
506 grpci1_cfg_w16(priv, TGT, 0, PCI_STATUS, status);
507
508 return IRQ_HANDLED;
509}
510
511static int grpci1_of_probe(struct platform_device *ofdev)
512{
513 struct grpci1_regs __iomem *regs;
514 struct grpci1_priv *priv;
515 int err, len;
516 const int *tmp;
517 u32 cfg, size, err_mask;
518 struct resource *res;
519
520 if (grpci1priv) {
521 dev_err(&ofdev->dev, "only one GRPCI1 supported\n");
522 return -ENODEV;
523 }
524
525 if (ofdev->num_resources < 3) {
526 dev_err(&ofdev->dev, "not enough APB/AHB resources\n");
527 return -EIO;
528 }
529
530 priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL);
531 if (!priv) {
532 dev_err(&ofdev->dev, "memory allocation failed\n");
533 return -ENOMEM;
534 }
535 platform_set_drvdata(ofdev, priv);
536 priv->dev = &ofdev->dev;
537
538 /* find device register base address */
539 res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
540 regs = devm_ioremap_resource(&ofdev->dev, res);
541 if (IS_ERR(regs))
542 return PTR_ERR(regs);
543
544 /*
545 * check that we're in Host Slot and that we can act as a Host Bridge
546 * and not only as target/peripheral.
547 */
548 cfg = REGLOAD(regs->cfg_stat);
549 if ((cfg & CFGSTAT_HOST) == 0) {
550 dev_err(&ofdev->dev, "not in host system slot\n");
551 return -EIO;
552 }
553
554 /* check that BAR1 support 256 MByte so that we can map kernel space */
555 REGSTORE(regs->page1, 0xffffffff);
556 size = ~REGLOAD(regs->page1) + 1;
557 if (size < 0x10000000) {
558 dev_err(&ofdev->dev, "BAR1 must be at least 256MByte\n");
559 return -EIO;
560 }
561
562 /* hardware must support little-endian PCI (byte-twisting) */
563 if ((REGLOAD(regs->page0) & PAGE0_BTEN) == 0) {
564 dev_err(&ofdev->dev, "byte-twisting is required\n");
565 return -EIO;
566 }
567
568 priv->regs = regs;
569 priv->irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
570 dev_info(&ofdev->dev, "host found at 0x%p, irq%d\n", regs, priv->irq);
571
572 /* Find PCI Memory, I/O and Configuration Space Windows */
573 priv->pci_area = ofdev->resource[1].start;
574 priv->pci_area_end = ofdev->resource[1].end+1;
575 priv->pci_io = ofdev->resource[2].start;
576 priv->pci_conf = ofdev->resource[2].start + 0x10000;
577 priv->pci_conf_end = priv->pci_conf + 0x10000;
578 priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000);
579 if (!priv->pci_io_va) {
580 dev_err(&ofdev->dev, "unable to map PCI I/O area\n");
581 return -EIO;
582 }
583
584 printk(KERN_INFO
585 "GRPCI1: MEMORY SPACE [0x%08lx - 0x%08lx]\n"
586 " I/O SPACE [0x%08lx - 0x%08lx]\n"
587 " CONFIG SPACE [0x%08lx - 0x%08lx]\n",
588 priv->pci_area, priv->pci_area_end-1,
589 priv->pci_io, priv->pci_conf-1,
590 priv->pci_conf, priv->pci_conf_end-1);
591
592 /*
593 * I/O Space resources in I/O Window mapped into Virtual Adr Space
594 * We never use low 4KB because some devices seem have problems using
595 * address 0.
596 */
597 priv->info.io_space.name = "GRPCI1 PCI I/O Space";
598 priv->info.io_space.start = priv->pci_io_va + 0x1000;
599 priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1;
600 priv->info.io_space.flags = IORESOURCE_IO;
601
602 /*
603 * grpci1 has no prefetchable memory, map everything as
604 * non-prefetchable memory
605 */
606 priv->info.mem_space.name = "GRPCI1 PCI MEM Space";
607 priv->info.mem_space.start = priv->pci_area;
608 priv->info.mem_space.end = priv->pci_area_end - 1;
609 priv->info.mem_space.flags = IORESOURCE_MEM;
610
611 if (request_resource(&iomem_resource, &priv->info.mem_space) < 0) {
612 dev_err(&ofdev->dev, "unable to request PCI memory area\n");
613 err = -ENOMEM;
614 goto err1;
615 }
616
617 if (request_resource(&ioport_resource, &priv->info.io_space) < 0) {
618 dev_err(&ofdev->dev, "unable to request PCI I/O area\n");
619 err = -ENOMEM;
620 goto err2;
621 }
622
623 /* setup maximum supported PCI buses */
624 priv->info.busn.name = "GRPCI1 busn";
625 priv->info.busn.start = 0;
626 priv->info.busn.end = 15;
627
628 grpci1priv = priv;
629
630 /* Initialize hardware */
631 grpci1_hw_init(priv);
632
633 /*
634 * Get PCI Interrupt to System IRQ mapping and setup IRQ handling
635 * Error IRQ. All PCI and PCI-Error interrupts are shared using the
636 * same system IRQ.
637 */
638 leon_update_virq_handling(priv->irq, grpci1_pci_flow_irq, "pcilvl", 0);
639
640 priv->irq_map[0] = grpci1_build_device_irq(1);
641 priv->irq_map[1] = grpci1_build_device_irq(2);
642 priv->irq_map[2] = grpci1_build_device_irq(3);
643 priv->irq_map[3] = grpci1_build_device_irq(4);
644 priv->irq_err = grpci1_build_device_irq(5);
645
646 printk(KERN_INFO " PCI INTA..D#: IRQ%d, IRQ%d, IRQ%d, IRQ%d\n",
647 priv->irq_map[0], priv->irq_map[1], priv->irq_map[2],
648 priv->irq_map[3]);
649
650 /* Enable IRQs on LEON IRQ controller */
651 err = devm_request_irq(&ofdev->dev, priv->irq, grpci1_jump_interrupt, 0,
652 "GRPCI1_JUMP", priv);
653 if (err) {
654 dev_err(&ofdev->dev, "ERR IRQ request failed: %d\n", err);
655 goto err3;
656 }
657
658 /* Setup IRQ handler for access errors */
659 err = devm_request_irq(&ofdev->dev, priv->irq_err,
660 grpci1_err_interrupt, IRQF_SHARED, "GRPCI1_ERR",
661 priv);
662 if (err) {
663 dev_err(&ofdev->dev, "ERR VIRQ request failed: %d\n", err);
664 goto err3;
665 }
666
667 tmp = of_get_property(ofdev->dev.of_node, "all_pci_errors", &len);
668 if (tmp && (len == 4)) {
669 priv->pci_err_mask = ALL_PCI_ERRORS;
670 err_mask = IRQ_ALL_ERRORS << IRQ_MASK_BIT;
671 } else {
672 priv->pci_err_mask = DEF_PCI_ERRORS;
673 err_mask = IRQ_DEF_ERRORS << IRQ_MASK_BIT;
674 }
675
676 /*
677 * Enable Error Interrupts. PCI interrupts are unmasked once request_irq
678 * is called by the PCI Device drivers
679 */
680 REGSTORE(regs->irq, err_mask);
681
682 /* Init common layer and scan buses */
683 priv->info.ops = &grpci1_ops;
684 priv->info.map_irq = grpci1_map_irq;
685 leon_pci_init(ofdev, &priv->info);
686
687 return 0;
688
689err3:
690 release_resource(&priv->info.io_space);
691err2:
692 release_resource(&priv->info.mem_space);
693err1:
694 iounmap((void __iomem *)priv->pci_io_va);
695 grpci1priv = NULL;
696 return err;
697}
698
699static const struct of_device_id grpci1_of_match[] __initconst = {
700 {
701 .name = "GAISLER_PCIFBRG",
702 },
703 {
704 .name = "01_014",
705 },
706 {},
707};
708
709static struct platform_driver grpci1_of_driver = {
710 .driver = {
711 .name = "grpci1",
712 .of_match_table = grpci1_of_match,
713 },
714 .probe = grpci1_of_probe,
715};
716
717static int __init grpci1_init(void)
718{
719 return platform_driver_register(&grpci1_of_driver);
720}
721
722subsys_initcall(grpci1_init);