Loading...
1/*
2 * linux/arch/arm/mach-omap2/sleep.S
3 *
4 * (C) Copyright 2004
5 * Texas Instruments, <www.ti.com>
6 * Richard Woodruff <r-woodruff2@ti.com>
7 *
8 * (C) Copyright 2006 Nokia Corporation
9 * Fixed idle loop sleep
10 * Igor Stoppa <igor.stoppa@nokia.com>
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * MA 02111-1307 USA
26 */
27
28#include <linux/linkage.h>
29#include <asm/assembler.h>
30
31#include <plat/omap24xx.h>
32
33#include "sdrc.h"
34
35/* First address of reserved address space? apparently valid for OMAP2 & 3 */
36#define A_SDRC0_V (0xC0000000)
37
38 .text
39
40/*
41 * Forces OMAP into idle state
42 *
43 * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI
44 * for normal idles.
45 *
46 * Note: This code get's copied to internal SRAM at boot. When the OMAP
47 * wakes up it continues execution at the point it went to sleep.
48 */
49 .align 3
50ENTRY(omap24xx_idle_loop_suspend)
51 stmfd sp!, {r0, lr} @ save registers on stack
52 mov r0, #0 @ clear for mcr setup
53 mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
54 ldmfd sp!, {r0, pc} @ restore regs and return
55
56ENTRY(omap24xx_idle_loop_suspend_sz)
57 .word . - omap24xx_idle_loop_suspend
58
59/*
60 * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing
61 * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore
62 * SDRC.
63 *
64 * Input:
65 * R0 : DLL ctrl value pre-Sleep
66 * R1 : SDRC_DLLA_CTRL
67 * R2 : SDRC_POWER
68 *
69 * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
70 * when we get called, but the DLL probably isn't. We will wait a bit more in
71 * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even
72 * if in unlocked mode.
73 *
74 * For less than 242x-ES2.2 upon wake from a sleep mode where the external
75 * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz
76 * clock can pass into the PRCM can cause problems at DSP and IVA.
77 * To work around this the code will switch to the 32kHz source prior to sleep.
78 * Post sleep we will shift back to using the DPLL. Apparently,
79 * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait
80 * 3x12MHz + 3x32kHz clocks for a full switch.
81 *
82 * The DLL load value is not kept in RETENTION or OFF. It needs to be restored
83 * at wake
84 */
85 .align 3
86ENTRY(omap24xx_cpu_suspend)
87 stmfd sp!, {r0 - r12, lr} @ save registers on stack
88 mov r3, #0x0 @ clear for mcr call
89 mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished
90 nop
91 nop
92 ldr r4, [r2] @ read SDRC_POWER
93 orr r4, r4, #0x40 @ enable self refresh on idle req
94 mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
95 str r4, [r2] @ make it so
96 nop
97 mcr p15, 0, r3, c7, c0, 4 @ wait for interrupt
98 nop
99loop:
100 subs r5, r5, #0x1 @ awake, wait just a bit
101 bne loop
102
103 /* The DPLL has to be on before we take the DDR out of self refresh */
104 bic r4, r4, #0x40 @ now clear self refresh bit.
105 str r4, [r2] @ write to SDRC_POWER
106 ldr r4, A_SDRC0 @ make a clock happen
107 ldr r4, [r4] @ read A_SDRC0
108 nop @ start auto refresh only after clk ok
109 movs r0, r0 @ see if DDR or SDR
110 strne r0, [r1] @ rewrite DLLA to force DLL reload
111 addne r1, r1, #0x8 @ move to DLLB
112 strne r0, [r1] @ rewrite DLLB to force DLL reload
113
114 mov r5, #0x1000
115loop2:
116 subs r5, r5, #0x1
117 bne loop2
118 /* resume*/
119 ldmfd sp!, {r0 - r12, pc} @ restore regs and return
120
121A_SDRC0:
122 .word A_SDRC0_V
123
124ENTRY(omap24xx_cpu_suspend_sz)
125 .word . - omap24xx_cpu_suspend
1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * linux/arch/arm/mach-omap2/sleep.S
4 *
5 * (C) Copyright 2004
6 * Texas Instruments, <www.ti.com>
7 * Richard Woodruff <r-woodruff2@ti.com>
8 *
9 * (C) Copyright 2006 Nokia Corporation
10 * Fixed idle loop sleep
11 * Igor Stoppa <igor.stoppa@nokia.com>
12 */
13
14#include <linux/linkage.h>
15#include <asm/assembler.h>
16
17#include "omap24xx.h"
18#include "sdrc.h"
19
20/* First address of reserved address space? apparently valid for OMAP2 & 3 */
21#define A_SDRC0_V (0xC0000000)
22
23 .text
24
25/*
26 * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing
27 * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore
28 * SDRC.
29 *
30 * Input:
31 * R0 : DLL ctrl value pre-Sleep
32 * R1 : SDRC_DLLA_CTRL
33 * R2 : SDRC_POWER
34 *
35 * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
36 * when we get called, but the DLL probably isn't. We will wait a bit more in
37 * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even
38 * if in unlocked mode.
39 *
40 * For less than 242x-ES2.2 upon wake from a sleep mode where the external
41 * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz
42 * clock can pass into the PRCM can cause problems at DSP and IVA.
43 * To work around this the code will switch to the 32kHz source prior to sleep.
44 * Post sleep we will shift back to using the DPLL. Apparently,
45 * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait
46 * 3x12MHz + 3x32kHz clocks for a full switch.
47 *
48 * The DLL load value is not kept in RETENTION or OFF. It needs to be restored
49 * at wake
50 */
51 .align 3
52ENTRY(omap24xx_cpu_suspend)
53 stmfd sp!, {r0 - r12, lr} @ save registers on stack
54 mov r3, #0x0 @ clear for mcr call
55 mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished
56 nop
57 nop
58 ldr r4, [r2] @ read SDRC_POWER
59 orr r4, r4, #0x40 @ enable self refresh on idle req
60 mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
61 str r4, [r2] @ make it so
62 nop
63 mcr p15, 0, r3, c7, c0, 4 @ wait for interrupt
64 nop
65loop:
66 subs r5, r5, #0x1 @ awake, wait just a bit
67 bne loop
68
69 /* The DPLL has to be on before we take the DDR out of self refresh */
70 bic r4, r4, #0x40 @ now clear self refresh bit.
71 str r4, [r2] @ write to SDRC_POWER
72 ldr r4, A_SDRC0 @ make a clock happen
73 ldr r4, [r4] @ read A_SDRC0
74 nop @ start auto refresh only after clk ok
75 movs r0, r0 @ see if DDR or SDR
76 strne r0, [r1] @ rewrite DLLA to force DLL reload
77 addne r1, r1, #0x8 @ move to DLLB
78 strne r0, [r1] @ rewrite DLLB to force DLL reload
79
80 mov r5, #0x1000
81loop2:
82 subs r5, r5, #0x1
83 bne loop2
84 /* resume*/
85 ldmfd sp!, {r0 - r12, pc} @ restore regs and return
86
87A_SDRC0:
88 .word A_SDRC0_V
89
90ENTRY(omap24xx_cpu_suspend_sz)
91 .word . - omap24xx_cpu_suspend