Loading...
1/*
2 * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
3 *
4 * Header file for Host Controller registers and I/O accessors.
5 *
6 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or (at
11 * your option) any later version.
12 */
13#ifndef __SDHCI_HW_H
14#define __SDHCI_HW_H
15
16#include <linux/scatterlist.h>
17#include <linux/compiler.h>
18#include <linux/types.h>
19#include <linux/io.h>
20
21#include <linux/mmc/sdhci.h>
22
23/*
24 * Controller registers
25 */
26
27#define SDHCI_DMA_ADDRESS 0x00
28#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS
29
30#define SDHCI_BLOCK_SIZE 0x04
31#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
32
33#define SDHCI_BLOCK_COUNT 0x06
34
35#define SDHCI_ARGUMENT 0x08
36
37#define SDHCI_TRANSFER_MODE 0x0C
38#define SDHCI_TRNS_DMA 0x01
39#define SDHCI_TRNS_BLK_CNT_EN 0x02
40#define SDHCI_TRNS_AUTO_CMD12 0x04
41#define SDHCI_TRNS_AUTO_CMD23 0x08
42#define SDHCI_TRNS_READ 0x10
43#define SDHCI_TRNS_MULTI 0x20
44
45#define SDHCI_COMMAND 0x0E
46#define SDHCI_CMD_RESP_MASK 0x03
47#define SDHCI_CMD_CRC 0x08
48#define SDHCI_CMD_INDEX 0x10
49#define SDHCI_CMD_DATA 0x20
50#define SDHCI_CMD_ABORTCMD 0xC0
51
52#define SDHCI_CMD_RESP_NONE 0x00
53#define SDHCI_CMD_RESP_LONG 0x01
54#define SDHCI_CMD_RESP_SHORT 0x02
55#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
56
57#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
58#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
59
60#define SDHCI_RESPONSE 0x10
61
62#define SDHCI_BUFFER 0x20
63
64#define SDHCI_PRESENT_STATE 0x24
65#define SDHCI_CMD_INHIBIT 0x00000001
66#define SDHCI_DATA_INHIBIT 0x00000002
67#define SDHCI_DOING_WRITE 0x00000100
68#define SDHCI_DOING_READ 0x00000200
69#define SDHCI_SPACE_AVAILABLE 0x00000400
70#define SDHCI_DATA_AVAILABLE 0x00000800
71#define SDHCI_CARD_PRESENT 0x00010000
72#define SDHCI_WRITE_PROTECT 0x00080000
73#define SDHCI_DATA_LVL_MASK 0x00F00000
74#define SDHCI_DATA_LVL_SHIFT 20
75
76#define SDHCI_HOST_CONTROL 0x28
77#define SDHCI_CTRL_LED 0x01
78#define SDHCI_CTRL_4BITBUS 0x02
79#define SDHCI_CTRL_HISPD 0x04
80#define SDHCI_CTRL_DMA_MASK 0x18
81#define SDHCI_CTRL_SDMA 0x00
82#define SDHCI_CTRL_ADMA1 0x08
83#define SDHCI_CTRL_ADMA32 0x10
84#define SDHCI_CTRL_ADMA64 0x18
85#define SDHCI_CTRL_8BITBUS 0x20
86
87#define SDHCI_POWER_CONTROL 0x29
88#define SDHCI_POWER_ON 0x01
89#define SDHCI_POWER_180 0x0A
90#define SDHCI_POWER_300 0x0C
91#define SDHCI_POWER_330 0x0E
92
93#define SDHCI_BLOCK_GAP_CONTROL 0x2A
94
95#define SDHCI_WAKE_UP_CONTROL 0x2B
96#define SDHCI_WAKE_ON_INT 0x01
97#define SDHCI_WAKE_ON_INSERT 0x02
98#define SDHCI_WAKE_ON_REMOVE 0x04
99
100#define SDHCI_CLOCK_CONTROL 0x2C
101#define SDHCI_DIVIDER_SHIFT 8
102#define SDHCI_DIVIDER_HI_SHIFT 6
103#define SDHCI_DIV_MASK 0xFF
104#define SDHCI_DIV_MASK_LEN 8
105#define SDHCI_DIV_HI_MASK 0x300
106#define SDHCI_PROG_CLOCK_MODE 0x0020
107#define SDHCI_CLOCK_CARD_EN 0x0004
108#define SDHCI_CLOCK_INT_STABLE 0x0002
109#define SDHCI_CLOCK_INT_EN 0x0001
110
111#define SDHCI_TIMEOUT_CONTROL 0x2E
112
113#define SDHCI_SOFTWARE_RESET 0x2F
114#define SDHCI_RESET_ALL 0x01
115#define SDHCI_RESET_CMD 0x02
116#define SDHCI_RESET_DATA 0x04
117
118#define SDHCI_INT_STATUS 0x30
119#define SDHCI_INT_ENABLE 0x34
120#define SDHCI_SIGNAL_ENABLE 0x38
121#define SDHCI_INT_RESPONSE 0x00000001
122#define SDHCI_INT_DATA_END 0x00000002
123#define SDHCI_INT_DMA_END 0x00000008
124#define SDHCI_INT_SPACE_AVAIL 0x00000010
125#define SDHCI_INT_DATA_AVAIL 0x00000020
126#define SDHCI_INT_CARD_INSERT 0x00000040
127#define SDHCI_INT_CARD_REMOVE 0x00000080
128#define SDHCI_INT_CARD_INT 0x00000100
129#define SDHCI_INT_ERROR 0x00008000
130#define SDHCI_INT_TIMEOUT 0x00010000
131#define SDHCI_INT_CRC 0x00020000
132#define SDHCI_INT_END_BIT 0x00040000
133#define SDHCI_INT_INDEX 0x00080000
134#define SDHCI_INT_DATA_TIMEOUT 0x00100000
135#define SDHCI_INT_DATA_CRC 0x00200000
136#define SDHCI_INT_DATA_END_BIT 0x00400000
137#define SDHCI_INT_BUS_POWER 0x00800000
138#define SDHCI_INT_ACMD12ERR 0x01000000
139#define SDHCI_INT_ADMA_ERROR 0x02000000
140
141#define SDHCI_INT_NORMAL_MASK 0x00007FFF
142#define SDHCI_INT_ERROR_MASK 0xFFFF8000
143
144#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
145 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
146#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
147 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
148 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
149 SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR)
150#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
151
152#define SDHCI_ACMD12_ERR 0x3C
153
154#define SDHCI_HOST_CONTROL2 0x3E
155#define SDHCI_CTRL_UHS_MASK 0x0007
156#define SDHCI_CTRL_UHS_SDR12 0x0000
157#define SDHCI_CTRL_UHS_SDR25 0x0001
158#define SDHCI_CTRL_UHS_SDR50 0x0002
159#define SDHCI_CTRL_UHS_SDR104 0x0003
160#define SDHCI_CTRL_UHS_DDR50 0x0004
161#define SDHCI_CTRL_HS_SDR200 0x0005 /* reserved value in SDIO spec */
162#define SDHCI_CTRL_VDD_180 0x0008
163#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
164#define SDHCI_CTRL_DRV_TYPE_B 0x0000
165#define SDHCI_CTRL_DRV_TYPE_A 0x0010
166#define SDHCI_CTRL_DRV_TYPE_C 0x0020
167#define SDHCI_CTRL_DRV_TYPE_D 0x0030
168#define SDHCI_CTRL_EXEC_TUNING 0x0040
169#define SDHCI_CTRL_TUNED_CLK 0x0080
170#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
171
172#define SDHCI_CAPABILITIES 0x40
173#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
174#define SDHCI_TIMEOUT_CLK_SHIFT 0
175#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
176#define SDHCI_CLOCK_BASE_MASK 0x00003F00
177#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00
178#define SDHCI_CLOCK_BASE_SHIFT 8
179#define SDHCI_MAX_BLOCK_MASK 0x00030000
180#define SDHCI_MAX_BLOCK_SHIFT 16
181#define SDHCI_CAN_DO_8BIT 0x00040000
182#define SDHCI_CAN_DO_ADMA2 0x00080000
183#define SDHCI_CAN_DO_ADMA1 0x00100000
184#define SDHCI_CAN_DO_HISPD 0x00200000
185#define SDHCI_CAN_DO_SDMA 0x00400000
186#define SDHCI_CAN_VDD_330 0x01000000
187#define SDHCI_CAN_VDD_300 0x02000000
188#define SDHCI_CAN_VDD_180 0x04000000
189#define SDHCI_CAN_64BIT 0x10000000
190
191#define SDHCI_SUPPORT_SDR50 0x00000001
192#define SDHCI_SUPPORT_SDR104 0x00000002
193#define SDHCI_SUPPORT_DDR50 0x00000004
194#define SDHCI_DRIVER_TYPE_A 0x00000010
195#define SDHCI_DRIVER_TYPE_C 0x00000020
196#define SDHCI_DRIVER_TYPE_D 0x00000040
197#define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00
198#define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8
199#define SDHCI_USE_SDR50_TUNING 0x00002000
200#define SDHCI_RETUNING_MODE_MASK 0x0000C000
201#define SDHCI_RETUNING_MODE_SHIFT 14
202#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
203#define SDHCI_CLOCK_MUL_SHIFT 16
204
205#define SDHCI_CAPABILITIES_1 0x44
206
207#define SDHCI_MAX_CURRENT 0x48
208#define SDHCI_MAX_CURRENT_330_MASK 0x0000FF
209#define SDHCI_MAX_CURRENT_330_SHIFT 0
210#define SDHCI_MAX_CURRENT_300_MASK 0x00FF00
211#define SDHCI_MAX_CURRENT_300_SHIFT 8
212#define SDHCI_MAX_CURRENT_180_MASK 0xFF0000
213#define SDHCI_MAX_CURRENT_180_SHIFT 16
214#define SDHCI_MAX_CURRENT_MULTIPLIER 4
215
216/* 4C-4F reserved for more max current */
217
218#define SDHCI_SET_ACMD12_ERROR 0x50
219#define SDHCI_SET_INT_ERROR 0x52
220
221#define SDHCI_ADMA_ERROR 0x54
222
223/* 55-57 reserved */
224
225#define SDHCI_ADMA_ADDRESS 0x58
226
227/* 60-FB reserved */
228
229#define SDHCI_SLOT_INT_STATUS 0xFC
230
231#define SDHCI_HOST_VERSION 0xFE
232#define SDHCI_VENDOR_VER_MASK 0xFF00
233#define SDHCI_VENDOR_VER_SHIFT 8
234#define SDHCI_SPEC_VER_MASK 0x00FF
235#define SDHCI_SPEC_VER_SHIFT 0
236#define SDHCI_SPEC_100 0
237#define SDHCI_SPEC_200 1
238#define SDHCI_SPEC_300 2
239
240/*
241 * End of controller registers.
242 */
243
244#define SDHCI_MAX_DIV_SPEC_200 256
245#define SDHCI_MAX_DIV_SPEC_300 2046
246
247/*
248 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
249 */
250#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
251#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
252
253struct sdhci_ops {
254#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
255 u32 (*read_l)(struct sdhci_host *host, int reg);
256 u16 (*read_w)(struct sdhci_host *host, int reg);
257 u8 (*read_b)(struct sdhci_host *host, int reg);
258 void (*write_l)(struct sdhci_host *host, u32 val, int reg);
259 void (*write_w)(struct sdhci_host *host, u16 val, int reg);
260 void (*write_b)(struct sdhci_host *host, u8 val, int reg);
261#endif
262
263 void (*set_clock)(struct sdhci_host *host, unsigned int clock);
264
265 int (*enable_dma)(struct sdhci_host *host);
266 unsigned int (*get_max_clock)(struct sdhci_host *host);
267 unsigned int (*get_min_clock)(struct sdhci_host *host);
268 unsigned int (*get_timeout_clock)(struct sdhci_host *host);
269 int (*platform_8bit_width)(struct sdhci_host *host,
270 int width);
271 void (*platform_send_init_74_clocks)(struct sdhci_host *host,
272 u8 power_mode);
273 unsigned int (*get_ro)(struct sdhci_host *host);
274 void (*platform_reset_enter)(struct sdhci_host *host, u8 mask);
275 void (*platform_reset_exit)(struct sdhci_host *host, u8 mask);
276 int (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
277 void (*hw_reset)(struct sdhci_host *host);
278 void (*platform_suspend)(struct sdhci_host *host);
279 void (*platform_resume)(struct sdhci_host *host);
280};
281
282#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
283
284static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
285{
286 if (unlikely(host->ops->write_l))
287 host->ops->write_l(host, val, reg);
288 else
289 writel(val, host->ioaddr + reg);
290}
291
292static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
293{
294 if (unlikely(host->ops->write_w))
295 host->ops->write_w(host, val, reg);
296 else
297 writew(val, host->ioaddr + reg);
298}
299
300static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
301{
302 if (unlikely(host->ops->write_b))
303 host->ops->write_b(host, val, reg);
304 else
305 writeb(val, host->ioaddr + reg);
306}
307
308static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
309{
310 if (unlikely(host->ops->read_l))
311 return host->ops->read_l(host, reg);
312 else
313 return readl(host->ioaddr + reg);
314}
315
316static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
317{
318 if (unlikely(host->ops->read_w))
319 return host->ops->read_w(host, reg);
320 else
321 return readw(host->ioaddr + reg);
322}
323
324static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
325{
326 if (unlikely(host->ops->read_b))
327 return host->ops->read_b(host, reg);
328 else
329 return readb(host->ioaddr + reg);
330}
331
332#else
333
334static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
335{
336 writel(val, host->ioaddr + reg);
337}
338
339static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
340{
341 writew(val, host->ioaddr + reg);
342}
343
344static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
345{
346 writeb(val, host->ioaddr + reg);
347}
348
349static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
350{
351 return readl(host->ioaddr + reg);
352}
353
354static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
355{
356 return readw(host->ioaddr + reg);
357}
358
359static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
360{
361 return readb(host->ioaddr + reg);
362}
363
364#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
365
366extern struct sdhci_host *sdhci_alloc_host(struct device *dev,
367 size_t priv_size);
368extern void sdhci_free_host(struct sdhci_host *host);
369
370static inline void *sdhci_priv(struct sdhci_host *host)
371{
372 return (void *)host->private;
373}
374
375extern void sdhci_card_detect(struct sdhci_host *host);
376extern int sdhci_add_host(struct sdhci_host *host);
377extern void sdhci_remove_host(struct sdhci_host *host, int dead);
378
379#ifdef CONFIG_PM
380extern int sdhci_suspend_host(struct sdhci_host *host);
381extern int sdhci_resume_host(struct sdhci_host *host);
382extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
383#endif
384
385#ifdef CONFIG_PM_RUNTIME
386extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
387extern int sdhci_runtime_resume_host(struct sdhci_host *host);
388#endif
389
390#endif /* __SDHCI_HW_H */
1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
4 *
5 * Header file for Host Controller registers and I/O accessors.
6 *
7 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
8 */
9#ifndef __SDHCI_HW_H
10#define __SDHCI_HW_H
11
12#include <linux/bits.h>
13#include <linux/scatterlist.h>
14#include <linux/compiler.h>
15#include <linux/types.h>
16#include <linux/io.h>
17#include <linux/leds.h>
18#include <linux/interrupt.h>
19
20#include <linux/mmc/host.h>
21
22/*
23 * Controller registers
24 */
25
26#define SDHCI_DMA_ADDRESS 0x00
27#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS
28#define SDHCI_32BIT_BLK_CNT SDHCI_DMA_ADDRESS
29
30#define SDHCI_BLOCK_SIZE 0x04
31#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
32
33#define SDHCI_BLOCK_COUNT 0x06
34
35#define SDHCI_ARGUMENT 0x08
36
37#define SDHCI_TRANSFER_MODE 0x0C
38#define SDHCI_TRNS_DMA 0x01
39#define SDHCI_TRNS_BLK_CNT_EN 0x02
40#define SDHCI_TRNS_AUTO_CMD12 0x04
41#define SDHCI_TRNS_AUTO_CMD23 0x08
42#define SDHCI_TRNS_AUTO_SEL 0x0C
43#define SDHCI_TRNS_READ 0x10
44#define SDHCI_TRNS_MULTI 0x20
45
46/*
47 * Defined in Host Version 4.0.
48 */
49#define SDHCI_TRNS_RES_TYPE 0x40
50#define SDHCI_TRNS_RES_ERR_CHECK 0x80
51#define SDHCI_TRNS_RES_INT_DIS 0x0100
52
53#define SDHCI_COMMAND 0x0E
54#define SDHCI_CMD_RESP_MASK 0x03
55
56/*
57 * Host Version 4.10 adds this bit to distinguish a main command or
58 * sub command.
59 * For example with SDIO, CMD52 (sub command) issued during CMD53 (main command).
60 */
61#define SDHCI_CMD_SUB_CMD 0x04
62
63#define SDHCI_CMD_CRC 0x08
64#define SDHCI_CMD_INDEX 0x10
65#define SDHCI_CMD_DATA 0x20
66#define SDHCI_CMD_ABORTCMD 0xC0
67
68#define SDHCI_CMD_RESP_NONE 0x00
69#define SDHCI_CMD_RESP_LONG 0x01
70#define SDHCI_CMD_RESP_SHORT 0x02
71#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
72
73#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
74#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
75
76#define SDHCI_RESPONSE 0x10
77
78#define SDHCI_BUFFER 0x20
79
80#define SDHCI_PRESENT_STATE 0x24
81#define SDHCI_CMD_INHIBIT 0x00000001
82#define SDHCI_DATA_INHIBIT 0x00000002
83
84#define SDHCI_DAT_4_TO_7_LVL_MASK 0x000000F0
85
86#define SDHCI_DOING_WRITE 0x00000100
87#define SDHCI_DOING_READ 0x00000200
88#define SDHCI_SPACE_AVAILABLE 0x00000400
89#define SDHCI_DATA_AVAILABLE 0x00000800
90#define SDHCI_CARD_PRESENT 0x00010000
91#define SDHCI_CARD_PRES_SHIFT 16
92#define SDHCI_CD_STABLE 0x00020000
93#define SDHCI_CD_LVL 0x00040000
94#define SDHCI_CD_LVL_SHIFT 18
95#define SDHCI_WRITE_PROTECT 0x00080000
96#define SDHCI_DATA_LVL_MASK 0x00F00000
97#define SDHCI_DATA_LVL_SHIFT 20
98#define SDHCI_DATA_0_LVL_MASK 0x00100000
99#define SDHCI_CMD_LVL 0x01000000
100
101/* Host Version 4.10 */
102
103#define SDHCI_HOST_REGULATOR_STABLE 0x02000000
104#define SDHCI_CMD_NOT_ISSUED_ERR 0x08000000
105#define SDHCI_SUB_CMD_STATUS 0x10000000
106#define SDHCI_UHS2_IN_DORMANT_STATE 0x20000000
107#define SDHCI_UHS2_LANE_SYNC 0x40000000
108#define SDHCI_UHS2_IF_DETECT 0x80000000
109
110#define SDHCI_HOST_CONTROL 0x28
111#define SDHCI_CTRL_LED 0x01
112#define SDHCI_CTRL_4BITBUS 0x02
113#define SDHCI_CTRL_HISPD 0x04
114#define SDHCI_CTRL_DMA_MASK 0x18
115#define SDHCI_CTRL_SDMA 0x00
116#define SDHCI_CTRL_ADMA1 0x08
117#define SDHCI_CTRL_ADMA32 0x10
118#define SDHCI_CTRL_ADMA64 0x18
119#define SDHCI_CTRL_ADMA3 0x18
120#define SDHCI_CTRL_8BITBUS 0x20
121#define SDHCI_CTRL_CDTEST_INS 0x40
122#define SDHCI_CTRL_CDTEST_EN 0x80
123
124#define SDHCI_POWER_CONTROL 0x29
125#define SDHCI_POWER_ON 0x01
126#define SDHCI_POWER_180 0x0A
127#define SDHCI_POWER_300 0x0C
128#define SDHCI_POWER_330 0x0E
129/*
130 * VDD2 - UHS2 or PCIe/NVMe
131 * VDD2 power on/off and voltage select
132 */
133#define SDHCI_VDD2_POWER_ON 0x10
134#define SDHCI_VDD2_POWER_120 0x80
135#define SDHCI_VDD2_POWER_180 0xA0
136
137#define SDHCI_BLOCK_GAP_CONTROL 0x2A
138
139#define SDHCI_WAKE_UP_CONTROL 0x2B
140#define SDHCI_WAKE_ON_INT 0x01
141#define SDHCI_WAKE_ON_INSERT 0x02
142#define SDHCI_WAKE_ON_REMOVE 0x04
143
144#define SDHCI_CLOCK_CONTROL 0x2C
145#define SDHCI_DIVIDER_SHIFT 8
146#define SDHCI_DIVIDER_HI_SHIFT 6
147#define SDHCI_DIV_MASK 0xFF
148#define SDHCI_DIV_MASK_LEN 8
149#define SDHCI_DIV_HI_MASK 0x300
150#define SDHCI_PROG_CLOCK_MODE 0x0020
151#define SDHCI_CLOCK_CARD_EN 0x0004
152#define SDHCI_CLOCK_PLL_EN 0x0008
153#define SDHCI_CLOCK_INT_STABLE 0x0002
154#define SDHCI_CLOCK_INT_EN 0x0001
155
156#define SDHCI_TIMEOUT_CONTROL 0x2E
157
158#define SDHCI_SOFTWARE_RESET 0x2F
159#define SDHCI_RESET_ALL 0x01
160#define SDHCI_RESET_CMD 0x02
161#define SDHCI_RESET_DATA 0x04
162
163#define SDHCI_INT_STATUS 0x30
164#define SDHCI_INT_ENABLE 0x34
165#define SDHCI_SIGNAL_ENABLE 0x38
166#define SDHCI_INT_RESPONSE 0x00000001
167#define SDHCI_INT_DATA_END 0x00000002
168#define SDHCI_INT_BLK_GAP 0x00000004
169#define SDHCI_INT_DMA_END 0x00000008
170#define SDHCI_INT_SPACE_AVAIL 0x00000010
171#define SDHCI_INT_DATA_AVAIL 0x00000020
172#define SDHCI_INT_CARD_INSERT 0x00000040
173#define SDHCI_INT_CARD_REMOVE 0x00000080
174#define SDHCI_INT_CARD_INT 0x00000100
175#define SDHCI_INT_RETUNE 0x00001000
176
177/* Host Version 4.10 */
178#define SDHCI_INT_FX_EVENT 0x00002000
179
180#define SDHCI_INT_CQE 0x00004000
181#define SDHCI_INT_ERROR 0x00008000
182#define SDHCI_INT_TIMEOUT 0x00010000
183#define SDHCI_INT_CRC 0x00020000
184#define SDHCI_INT_END_BIT 0x00040000
185#define SDHCI_INT_INDEX 0x00080000
186#define SDHCI_INT_DATA_TIMEOUT 0x00100000
187#define SDHCI_INT_DATA_CRC 0x00200000
188#define SDHCI_INT_DATA_END_BIT 0x00400000
189#define SDHCI_INT_BUS_POWER 0x00800000
190#define SDHCI_INT_AUTO_CMD_ERR 0x01000000
191#define SDHCI_INT_ADMA_ERROR 0x02000000
192#define SDHCI_INT_TUNING_ERROR 0x04000000
193
194/* Host Version 4.0 */
195#define SDHCI_INT_RESP_ERR 0x08000000
196
197#define SDHCI_INT_NORMAL_MASK 0x00007FFF
198#define SDHCI_INT_ERROR_MASK 0xFFFF8000
199
200#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
201 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX | \
202 SDHCI_INT_AUTO_CMD_ERR)
203#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
204 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
205 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
206 SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \
207 SDHCI_INT_BLK_GAP | SDHCI_INT_TUNING_ERROR)
208#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
209
210#define SDHCI_CQE_INT_ERR_MASK ( \
211 SDHCI_INT_ADMA_ERROR | SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | \
212 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | \
213 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)
214
215#define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE)
216
217#define SDHCI_AUTO_CMD_STATUS 0x3C
218#define SDHCI_AUTO_CMD_TIMEOUT 0x00000002
219#define SDHCI_AUTO_CMD_CRC 0x00000004
220#define SDHCI_AUTO_CMD_END_BIT 0x00000008
221#define SDHCI_AUTO_CMD_INDEX 0x00000010
222
223/* Host Version 4.10 */
224#define SDHCI_AUTO_CMD_RESP_ERR 0x0020
225
226#define SDHCI_HOST_CONTROL2 0x3E
227#define SDHCI_CTRL_UHS_MASK 0x0007
228#define SDHCI_CTRL_UHS_SDR12 0x0000
229#define SDHCI_CTRL_UHS_SDR25 0x0001
230#define SDHCI_CTRL_UHS_SDR50 0x0002
231#define SDHCI_CTRL_UHS_SDR104 0x0003
232#define SDHCI_CTRL_UHS_DDR50 0x0004
233#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
234#define SDHCI_CTRL_UHS2 0x0007
235#define SDHCI_CTRL_VDD_180 0x0008
236#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
237#define SDHCI_CTRL_DRV_TYPE_B 0x0000
238#define SDHCI_CTRL_DRV_TYPE_A 0x0010
239#define SDHCI_CTRL_DRV_TYPE_C 0x0020
240#define SDHCI_CTRL_DRV_TYPE_D 0x0030
241#define SDHCI_CTRL_EXEC_TUNING 0x0040
242#define SDHCI_CTRL_TUNED_CLK 0x0080
243#define SDHCI_CTRL_UHS2_ENABLE 0x0100
244#define SDHCI_CTRL_ADMA2_LEN_MODE 0x0400
245#define SDHCI_CMD23_ENABLE 0x0800
246#define SDHCI_CTRL_V4_MODE 0x1000
247#define SDHCI_CTRL_64BIT_ADDR 0x2000
248#define SDHCI_CTRL_ASYNC_INT_ENABLE 0x4000
249#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
250
251#define SDHCI_CAPABILITIES 0x40
252#define SDHCI_TIMEOUT_CLK_MASK GENMASK(5, 0)
253#define SDHCI_TIMEOUT_CLK_SHIFT 0
254#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
255#define SDHCI_CLOCK_BASE_MASK GENMASK(13, 8)
256#define SDHCI_CLOCK_BASE_SHIFT 8
257#define SDHCI_CLOCK_V3_BASE_MASK GENMASK(15, 8)
258#define SDHCI_MAX_BLOCK_MASK 0x00030000
259#define SDHCI_MAX_BLOCK_SHIFT 16
260#define SDHCI_CAN_DO_8BIT 0x00040000
261#define SDHCI_CAN_DO_ADMA2 0x00080000
262#define SDHCI_CAN_DO_ADMA1 0x00100000
263#define SDHCI_CAN_DO_HISPD 0x00200000
264#define SDHCI_CAN_DO_SDMA 0x00400000
265#define SDHCI_CAN_DO_SUSPEND 0x00800000
266#define SDHCI_CAN_VDD_330 0x01000000
267#define SDHCI_CAN_VDD_300 0x02000000
268#define SDHCI_CAN_VDD_180 0x04000000
269#define SDHCI_CAN_64BIT_V4 0x08000000
270#define SDHCI_CAN_64BIT 0x10000000
271#define SDHCI_CAN_ASYNC_INT 0x20000000
272
273#define SDHCI_CAPABILITIES_1 0x44
274#define SDHCI_SUPPORT_SDR50 0x00000001
275#define SDHCI_SUPPORT_SDR104 0x00000002
276#define SDHCI_SUPPORT_DDR50 0x00000004
277#define SDHCI_SUPPORT_UHS2 0x00000008
278#define SDHCI_DRIVER_TYPE_A 0x00000010
279#define SDHCI_DRIVER_TYPE_C 0x00000020
280#define SDHCI_DRIVER_TYPE_D 0x00000040
281#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8)
282#define SDHCI_USE_SDR50_TUNING 0x00002000
283#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14)
284#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16)
285#define SDHCI_CAN_DO_ADMA3 0x08000000
286#define SDHCI_CAN_VDD2_180 0x10000000 /* UHS-2 1.8V VDD2 */
287#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
288
289#define SDHCI_MAX_CURRENT 0x48
290#define SDHCI_MAX_CURRENT_LIMIT GENMASK(7, 0)
291#define SDHCI_MAX_CURRENT_330_MASK GENMASK(7, 0)
292#define SDHCI_MAX_CURRENT_300_MASK GENMASK(15, 8)
293#define SDHCI_MAX_CURRENT_180_MASK GENMASK(23, 16)
294#define SDHCI_MAX_CURRENT_1 0x4C
295#define SDHCI_MAX_CURRENT_VDD2_180_MASK GENMASK(7, 0) /* UHS2 */
296#define SDHCI_MAX_CURRENT_MULTIPLIER 4
297
298/* 4C-4F reserved for more max current */
299
300#define SDHCI_SET_ACMD12_ERROR 0x50
301/* Host Version 4.10 */
302#define SDHCI_SET_INT_ERROR 0x52
303
304#define SDHCI_ADMA_ERROR 0x54
305
306/* 55-57 reserved */
307
308#define SDHCI_ADMA_ADDRESS 0x58
309#define SDHCI_ADMA_ADDRESS_HI 0x5C
310
311/* 60-FB reserved */
312
313#define SDHCI_PRESET_FOR_HIGH_SPEED 0x64
314#define SDHCI_PRESET_FOR_SDR12 0x66
315#define SDHCI_PRESET_FOR_SDR25 0x68
316#define SDHCI_PRESET_FOR_SDR50 0x6A
317#define SDHCI_PRESET_FOR_SDR104 0x6C
318#define SDHCI_PRESET_FOR_DDR50 0x6E
319#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
320
321/* UHS2 */
322#define SDHCI_PRESET_FOR_UHS2 0x74
323#define SDHCI_PRESET_DRV_MASK GENMASK(15, 14)
324#define SDHCI_PRESET_CLKGEN_SEL BIT(10)
325#define SDHCI_PRESET_SDCLK_FREQ_MASK GENMASK(9, 0)
326
327#define SDHCI_ADMA3_ADDRESS 0x78
328
329#define SDHCI_SLOT_INT_STATUS 0xFC
330
331#define SDHCI_HOST_VERSION 0xFE
332#define SDHCI_VENDOR_VER_MASK 0xFF00
333#define SDHCI_VENDOR_VER_SHIFT 8
334#define SDHCI_SPEC_VER_MASK 0x00FF
335#define SDHCI_SPEC_VER_SHIFT 0
336#define SDHCI_SPEC_100 0
337#define SDHCI_SPEC_200 1
338#define SDHCI_SPEC_300 2
339#define SDHCI_SPEC_400 3
340#define SDHCI_SPEC_410 4
341#define SDHCI_SPEC_420 5
342
343/*
344 * End of controller registers.
345 */
346
347#define SDHCI_MAX_DIV_SPEC_200 256
348#define SDHCI_MAX_DIV_SPEC_300 2046
349
350/*
351 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
352 */
353#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
354#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
355
356/* ADMA2 32-bit DMA descriptor size */
357#define SDHCI_ADMA2_32_DESC_SZ 8
358
359/* ADMA2 32-bit descriptor */
360struct sdhci_adma2_32_desc {
361 __le16 cmd;
362 __le16 len;
363 __le32 addr;
364} __packed __aligned(4);
365
366/* ADMA2 data alignment */
367#define SDHCI_ADMA2_ALIGN 4
368#define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1)
369
370/*
371 * ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte
372 * alignment for the descriptor table even in 32-bit DMA mode. Memory
373 * allocation is at least 8 byte aligned anyway, so just stipulate 8 always.
374 */
375#define SDHCI_ADMA2_DESC_ALIGN 8
376
377/*
378 * ADMA2 64-bit DMA descriptor size
379 * According to SD Host Controller spec v4.10, there are two kinds of
380 * descriptors for 64-bit addressing mode: 96-bit Descriptor and 128-bit
381 * Descriptor, if Host Version 4 Enable is set in the Host Control 2
382 * register, 128-bit Descriptor will be selected.
383 */
384#define SDHCI_ADMA2_64_DESC_SZ(host) ((host)->v4_mode ? 16 : 12)
385
386/*
387 * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
388 * aligned.
389 */
390struct sdhci_adma2_64_desc {
391 __le16 cmd;
392 __le16 len;
393 __le32 addr_lo;
394 __le32 addr_hi;
395} __packed __aligned(4);
396
397#define ADMA2_TRAN_VALID 0x21
398#define ADMA2_NOP_END_VALID 0x3
399#define ADMA2_END 0x2
400
401/*
402 * Maximum segments assuming a 512KiB maximum requisition size and a minimum
403 * 4KiB page size. Note this also allows enough for multiple descriptors in
404 * case of PAGE_SIZE >= 64KiB.
405 */
406#define SDHCI_MAX_SEGS 128
407
408/* Allow for a command request and a data request at the same time */
409#define SDHCI_MAX_MRQS 2
410
411/*
412 * 48bit command and 136 bit response in 100KHz clock could take upto 2.48ms.
413 * However since the start time of the command, the time between
414 * command and response, and the time between response and start of data is
415 * not known, set the command transfer time to 10ms.
416 */
417#define MMC_CMD_TRANSFER_TIME (10 * NSEC_PER_MSEC) /* max 10 ms */
418
419#define sdhci_err_stats_inc(host, err_name) \
420 mmc_debugfs_err_stats_inc((host)->mmc, MMC_ERR_##err_name)
421
422enum sdhci_cookie {
423 COOKIE_UNMAPPED,
424 COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */
425 COOKIE_MAPPED, /* mapped by sdhci_prepare_data() */
426};
427
428struct sdhci_host {
429 /* Data set by hardware interface driver */
430 const char *hw_name; /* Hardware bus name */
431
432 unsigned int quirks; /* Deviations from spec. */
433
434/* Controller doesn't honor resets unless we touch the clock register */
435#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
436/* Controller has bad caps bits, but really supports DMA */
437#define SDHCI_QUIRK_FORCE_DMA (1<<1)
438/* Controller doesn't like to be reset when there is no card inserted. */
439#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
440/* Controller doesn't like clearing the power reg before a change */
441#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
442/* Controller has an unusable DMA engine */
443#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
444/* Controller has an unusable ADMA engine */
445#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
446/* Controller can only DMA from 32-bit aligned addresses */
447#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
448/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
449#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
450/* Controller can only ADMA chunks that are a multiple of 32 bits */
451#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
452/* Controller needs to be reset after each request to stay stable */
453#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
454/* Controller needs voltage and power writes to happen separately */
455#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
456/* Controller provides an incorrect timeout value for transfers */
457#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
458/* Controller has an issue with buffer bits for small transfers */
459#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
460/* Controller does not provide transfer-complete interrupt when not busy */
461#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
462/* Controller has unreliable card detection */
463#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
464/* Controller reports inverted write-protect state */
465#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
466/* Controller has unusable command queue engine */
467#define SDHCI_QUIRK_BROKEN_CQE (1<<17)
468/* Controller does not like fast PIO transfers */
469#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
470/* Controller does not have a LED */
471#define SDHCI_QUIRK_NO_LED (1<<19)
472/* Controller has to be forced to use block size of 2048 bytes */
473#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
474/* Controller cannot do multi-block transfers */
475#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
476/* Controller can only handle 1-bit data transfers */
477#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
478/* Controller needs 10ms delay between applying power and clock */
479#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
480/* Controller uses SDCLK instead of TMCLK for data timeouts */
481#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
482/* Controller reports wrong base clock capability */
483#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
484/* Controller cannot support End Attribute in NOP ADMA descriptor */
485#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
486/* Controller uses Auto CMD12 command to stop the transfer */
487#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
488/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
489#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
490/* Controller treats ADMA descriptors with length 0000h incorrectly */
491#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30)
492
493 unsigned int quirks2; /* More deviations from spec. */
494
495#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0)
496#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1)
497/* The system physically doesn't support 1.8v, even if the host does */
498#define SDHCI_QUIRK2_NO_1_8_V (1<<2)
499#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3)
500#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4)
501/* Controller has a non-standard host control register */
502#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5)
503/* Controller does not support HS200 */
504#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6)
505/* Controller does not support DDR50 */
506#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
507/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
508#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8)
509/* Controller does not support 64-bit DMA */
510#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9)
511/* need clear transfer mode register before send cmd */
512#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10)
513/* Capability register bit-63 indicates HS400 support */
514#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11)
515/* forced tuned clock */
516#define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12)
517/* disable the block count for single block transactions */
518#define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13)
519/* Controller broken with using ACMD23 */
520#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14)
521/* Broken Clock divider zero in controller */
522#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
523/* Controller has CRC in 136 bit Command Response */
524#define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16)
525/*
526 * Disable HW timeout if the requested timeout is more than the maximum
527 * obtainable timeout.
528 */
529#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17)
530/*
531 * 32-bit block count may not support eMMC where upper bits of CMD23 are used
532 * for other purposes. Consequently we support 16-bit block count by default.
533 * Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit
534 * block count.
535 */
536#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18)
537/* Issue CMD and DATA reset together */
538#define SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER (1<<19)
539
540 int irq; /* Device IRQ */
541 void __iomem *ioaddr; /* Mapped address */
542 phys_addr_t mapbase; /* physical address base */
543 char *bounce_buffer; /* For packing SDMA reads/writes */
544 dma_addr_t bounce_addr;
545 unsigned int bounce_buffer_size;
546
547 const struct sdhci_ops *ops; /* Low level hw interface */
548
549 /* Internal data */
550 struct mmc_host *mmc; /* MMC structure */
551 struct mmc_host_ops mmc_host_ops; /* MMC host ops */
552 u64 dma_mask; /* custom DMA mask */
553
554#if IS_ENABLED(CONFIG_LEDS_CLASS)
555 struct led_classdev led; /* LED control */
556 char led_name[32];
557#endif
558
559 spinlock_t lock; /* Mutex */
560
561 int flags; /* Host attributes */
562#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
563#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
564#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
565#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
566#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */
567#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */
568#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
569#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */
570#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
571#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */
572#define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */
573#define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */
574#define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */
575
576 unsigned int version; /* SDHCI spec. version */
577
578 unsigned int max_clk; /* Max possible freq (MHz) */
579 unsigned int timeout_clk; /* Timeout freq (KHz) */
580 u8 max_timeout_count; /* Vendor specific max timeout count */
581 unsigned int clk_mul; /* Clock Muliplier value */
582
583 unsigned int clock; /* Current clock (MHz) */
584 u8 pwr; /* Current voltage */
585 u8 drv_type; /* Current UHS-I driver type */
586 bool reinit_uhs; /* Force UHS-related re-initialization */
587
588 bool runtime_suspended; /* Host is runtime suspended */
589 bool bus_on; /* Bus power prevents runtime suspend */
590 bool preset_enabled; /* Preset is enabled */
591 bool pending_reset; /* Cmd/data reset is pending */
592 bool irq_wake_enabled; /* IRQ wakeup is enabled */
593 bool v4_mode; /* Host Version 4 Enable */
594 bool use_external_dma; /* Host selects to use external DMA */
595 bool always_defer_done; /* Always defer to complete requests */
596
597 struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */
598 struct mmc_command *cmd; /* Current command */
599 struct mmc_command *data_cmd; /* Current data command */
600 struct mmc_command *deferred_cmd; /* Deferred command */
601 struct mmc_data *data; /* Current data request */
602 unsigned int data_early:1; /* Data finished before cmd */
603
604 struct sg_mapping_iter sg_miter; /* SG state for PIO */
605 unsigned int blocks; /* remaining PIO blocks */
606
607 int sg_count; /* Mapped sg entries */
608 int max_adma; /* Max. length in ADMA descriptor */
609
610 void *adma_table; /* ADMA descriptor table */
611 void *align_buffer; /* Bounce buffer */
612
613 size_t adma_table_sz; /* ADMA descriptor table size */
614 size_t align_buffer_sz; /* Bounce buffer size */
615
616 dma_addr_t adma_addr; /* Mapped ADMA descr. table */
617 dma_addr_t align_addr; /* Mapped bounce buffer */
618
619 unsigned int desc_sz; /* ADMA current descriptor size */
620 unsigned int alloc_desc_sz; /* ADMA descr. max size host supports */
621
622 struct workqueue_struct *complete_wq; /* Request completion wq */
623 struct work_struct complete_work; /* Request completion work */
624
625 struct timer_list timer; /* Timer for timeouts */
626 struct timer_list data_timer; /* Timer for data timeouts */
627
628 void (*complete_work_fn)(struct work_struct *work);
629 irqreturn_t (*thread_irq_fn)(int irq, void *dev_id);
630
631#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
632 struct dma_chan *rx_chan;
633 struct dma_chan *tx_chan;
634#endif
635
636 u32 caps; /* CAPABILITY_0 */
637 u32 caps1; /* CAPABILITY_1 */
638 bool read_caps; /* Capability flags have been read */
639
640 bool sdhci_core_to_disable_vqmmc; /* sdhci core can disable vqmmc */
641 unsigned int ocr_avail_sdio; /* OCR bit masks */
642 unsigned int ocr_avail_sd;
643 unsigned int ocr_avail_mmc;
644 u32 ocr_mask; /* available voltages */
645
646 unsigned timing; /* Current timing */
647
648 u32 thread_isr;
649
650 /* cached registers */
651 u32 ier;
652
653 bool cqe_on; /* CQE is operating */
654 u32 cqe_ier; /* CQE interrupt mask */
655 u32 cqe_err_ier; /* CQE error interrupt mask */
656
657 wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */
658 unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */
659
660 unsigned int tuning_count; /* Timer count for re-tuning */
661 unsigned int tuning_mode; /* Re-tuning mode supported by host */
662 unsigned int tuning_err; /* Error code for re-tuning */
663#define SDHCI_TUNING_MODE_1 0
664#define SDHCI_TUNING_MODE_2 1
665#define SDHCI_TUNING_MODE_3 2
666 /* Delay (ms) between tuning commands */
667 int tuning_delay;
668 int tuning_loop_count;
669
670 /* Host SDMA buffer boundary. */
671 u32 sdma_boundary;
672
673 /* Host ADMA table count */
674 u32 adma_table_cnt;
675
676 u64 data_timeout;
677
678 unsigned long private[] ____cacheline_aligned;
679};
680
681struct sdhci_ops {
682#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
683 u32 (*read_l)(struct sdhci_host *host, int reg);
684 u16 (*read_w)(struct sdhci_host *host, int reg);
685 u8 (*read_b)(struct sdhci_host *host, int reg);
686 void (*write_l)(struct sdhci_host *host, u32 val, int reg);
687 void (*write_w)(struct sdhci_host *host, u16 val, int reg);
688 void (*write_b)(struct sdhci_host *host, u8 val, int reg);
689#endif
690
691 void (*set_clock)(struct sdhci_host *host, unsigned int clock);
692 void (*set_power)(struct sdhci_host *host, unsigned char mode,
693 unsigned short vdd);
694
695 u32 (*irq)(struct sdhci_host *host, u32 intmask);
696
697 int (*set_dma_mask)(struct sdhci_host *host);
698 int (*enable_dma)(struct sdhci_host *host);
699 unsigned int (*get_max_clock)(struct sdhci_host *host);
700 unsigned int (*get_min_clock)(struct sdhci_host *host);
701 /* get_timeout_clock should return clk rate in unit of Hz */
702 unsigned int (*get_timeout_clock)(struct sdhci_host *host);
703 unsigned int (*get_max_timeout_count)(struct sdhci_host *host);
704 void (*set_timeout)(struct sdhci_host *host,
705 struct mmc_command *cmd);
706 void (*set_bus_width)(struct sdhci_host *host, int width);
707 void (*platform_send_init_74_clocks)(struct sdhci_host *host,
708 u8 power_mode);
709 unsigned int (*get_ro)(struct sdhci_host *host);
710 void (*reset)(struct sdhci_host *host, u8 mask);
711 int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode);
712 void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
713 void (*hw_reset)(struct sdhci_host *host);
714 void (*adma_workaround)(struct sdhci_host *host, u32 intmask);
715 void (*card_event)(struct sdhci_host *host);
716 void (*voltage_switch)(struct sdhci_host *host);
717 void (*adma_write_desc)(struct sdhci_host *host, void **desc,
718 dma_addr_t addr, int len, unsigned int cmd);
719 void (*copy_to_bounce_buffer)(struct sdhci_host *host,
720 struct mmc_data *data,
721 unsigned int length);
722 void (*request_done)(struct sdhci_host *host,
723 struct mmc_request *mrq);
724 void (*dump_vendor_regs)(struct sdhci_host *host);
725 void (*dump_uhs2_regs)(struct sdhci_host *host);
726 void (*uhs2_pre_detect_init)(struct sdhci_host *host);
727};
728
729#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
730
731static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
732{
733 if (unlikely(host->ops->write_l))
734 host->ops->write_l(host, val, reg);
735 else
736 writel(val, host->ioaddr + reg);
737}
738
739static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
740{
741 if (unlikely(host->ops->write_w))
742 host->ops->write_w(host, val, reg);
743 else
744 writew(val, host->ioaddr + reg);
745}
746
747static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
748{
749 if (unlikely(host->ops->write_b))
750 host->ops->write_b(host, val, reg);
751 else
752 writeb(val, host->ioaddr + reg);
753}
754
755static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
756{
757 if (unlikely(host->ops->read_l))
758 return host->ops->read_l(host, reg);
759 else
760 return readl(host->ioaddr + reg);
761}
762
763static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
764{
765 if (unlikely(host->ops->read_w))
766 return host->ops->read_w(host, reg);
767 else
768 return readw(host->ioaddr + reg);
769}
770
771static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
772{
773 if (unlikely(host->ops->read_b))
774 return host->ops->read_b(host, reg);
775 else
776 return readb(host->ioaddr + reg);
777}
778
779#else
780
781static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
782{
783 writel(val, host->ioaddr + reg);
784}
785
786static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
787{
788 writew(val, host->ioaddr + reg);
789}
790
791static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
792{
793 writeb(val, host->ioaddr + reg);
794}
795
796static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
797{
798 return readl(host->ioaddr + reg);
799}
800
801static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
802{
803 return readw(host->ioaddr + reg);
804}
805
806static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
807{
808 return readb(host->ioaddr + reg);
809}
810
811#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
812
813struct sdhci_host *sdhci_alloc_host(struct device *dev, size_t priv_size);
814void sdhci_free_host(struct sdhci_host *host);
815
816static inline void *sdhci_priv(struct sdhci_host *host)
817{
818 return host->private;
819}
820
821void __sdhci_read_caps(struct sdhci_host *host, const u16 *ver,
822 const u32 *caps, const u32 *caps1);
823int sdhci_setup_host(struct sdhci_host *host);
824void sdhci_cleanup_host(struct sdhci_host *host);
825int __sdhci_add_host(struct sdhci_host *host);
826int sdhci_add_host(struct sdhci_host *host);
827void sdhci_remove_host(struct sdhci_host *host, int dead);
828
829static inline void sdhci_read_caps(struct sdhci_host *host)
830{
831 __sdhci_read_caps(host, NULL, NULL, NULL);
832}
833
834bool sdhci_needs_reset(struct sdhci_host *host, struct mmc_request *mrq);
835bool sdhci_data_line_cmd(struct mmc_command *cmd);
836void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, unsigned long timeout);
837void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data);
838void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data);
839void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq);
840void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq);
841void __sdhci_finish_data_common(struct sdhci_host *host, bool defer_reset);
842bool sdhci_present_error(struct sdhci_host *host, struct mmc_command *cmd, bool present);
843u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
844 unsigned int *actual_clock);
845void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
846void sdhci_enable_clk(struct sdhci_host *host, u16 clk);
847void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
848 unsigned short vdd);
849void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
850 unsigned char mode,
851 unsigned short vdd);
852unsigned short sdhci_get_vdd_value(unsigned short vdd);
853void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
854 unsigned short vdd);
855int sdhci_get_cd_nogpio(struct mmc_host *mmc);
856int sdhci_get_ro(struct mmc_host *mmc);
857void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
858int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
859void sdhci_set_bus_width(struct sdhci_host *host, int width);
860void sdhci_reset(struct sdhci_host *host, u8 mask);
861bool sdhci_do_reset(struct sdhci_host *host, u8 mask);
862void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
863int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
864int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode);
865void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
866void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios);
867void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
868int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
869 struct mmc_ios *ios);
870void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable);
871void sdhci_request_done_dma(struct sdhci_host *host, struct mmc_request *mrq);
872void sdhci_complete_work(struct work_struct *work);
873irqreturn_t sdhci_thread_irq(int irq, void *dev_id);
874void sdhci_adma_write_desc(struct sdhci_host *host, void **desc,
875 dma_addr_t addr, int len, unsigned int cmd);
876
877#ifdef CONFIG_PM
878int sdhci_suspend_host(struct sdhci_host *host);
879int sdhci_resume_host(struct sdhci_host *host);
880int sdhci_runtime_suspend_host(struct sdhci_host *host);
881int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset);
882#endif
883
884void sdhci_cqe_enable(struct mmc_host *mmc);
885void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery);
886bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
887 int *data_error);
888
889void sdhci_dumpregs(struct sdhci_host *host);
890void sdhci_enable_v4_mode(struct sdhci_host *host);
891
892void sdhci_start_tuning(struct sdhci_host *host);
893void sdhci_end_tuning(struct sdhci_host *host);
894void sdhci_reset_tuning(struct sdhci_host *host);
895void sdhci_send_tuning(struct sdhci_host *host, u32 opcode);
896void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode);
897void sdhci_switch_external_dma(struct sdhci_host *host, bool en);
898void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable);
899void __sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
900
901#endif /* __SDHCI_HW_H */