Loading...
Note: File does not exist in v3.5.6.
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * leds-blinkm.c
4 * (c) Jan-Simon Möller (dl9pf@gmx.de)
5 * (c) Joseph Strauss (jstrauss@mailbox.org)
6 */
7
8#include <linux/module.h>
9#include <linux/slab.h>
10#include <linux/jiffies.h>
11#include <linux/i2c.h>
12#include <linux/err.h>
13#include <linux/mutex.h>
14#include <linux/sysfs.h>
15#include <linux/printk.h>
16#include <linux/pm_runtime.h>
17#include <linux/leds.h>
18#include <linux/delay.h>
19#include <linux/led-class-multicolor.h>
20#include <linux/kconfig.h>
21
22#define NUM_LEDS 3
23
24/* Addresses to scan - BlinkM is on 0x09 by default*/
25static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };
26
27static int blinkm_transfer_hw(struct i2c_client *client, int cmd);
28static int blinkm_test_run(struct i2c_client *client);
29
30/* Contains structs for both the color-separated sysfs classes, and the new multicolor class */
31struct blinkm_led {
32 struct i2c_client *i2c_client;
33 union {
34 /* used when multicolor support is disabled */
35 struct led_classdev led_cdev;
36 struct led_classdev_mc mcled_cdev;
37 } cdev;
38 int id;
39};
40
41#define led_cdev_to_blmled(c) container_of(c, struct blinkm_led, cdev.led_cdev)
42#define mcled_cdev_to_led(c) container_of(c, struct blinkm_led, cdev.mcled_cdev)
43
44struct blinkm_data {
45 struct i2c_client *i2c_client;
46 struct mutex update_lock;
47 /* used for led class interface */
48 struct blinkm_led blinkm_leds[NUM_LEDS];
49 /* used for "blinkm" sysfs interface */
50 u8 red; /* color red */
51 u8 green; /* color green */
52 u8 blue; /* color blue */
53 /* next values to use for transfer */
54 u8 next_red; /* color red */
55 u8 next_green; /* color green */
56 u8 next_blue; /* color blue */
57 /* internal use */
58 u8 args[7]; /* set of args for transmission */
59 u8 i2c_addr; /* i2c addr */
60 u8 fw_ver; /* firmware version */
61 /* used, but not from userspace */
62 u8 hue; /* HSB hue */
63 u8 saturation; /* HSB saturation */
64 u8 brightness; /* HSB brightness */
65 u8 next_hue; /* HSB hue */
66 u8 next_saturation; /* HSB saturation */
67 u8 next_brightness; /* HSB brightness */
68 /* currently unused / todo */
69 u8 fade_speed; /* fade speed 1 - 255 */
70 s8 time_adjust; /* time adjust -128 - 127 */
71 u8 fade:1; /* fade on = 1, off = 0 */
72 u8 rand:1; /* rand fade mode on = 1 */
73 u8 script_id; /* script ID */
74 u8 script_repeats; /* repeats of script */
75 u8 script_startline; /* line to start */
76};
77
78/* Colors */
79#define RED 0
80#define GREEN 1
81#define BLUE 2
82
83/* mapping command names to cmd chars - see datasheet */
84#define BLM_GO_RGB 0
85#define BLM_FADE_RGB 1
86#define BLM_FADE_HSB 2
87#define BLM_FADE_RAND_RGB 3
88#define BLM_FADE_RAND_HSB 4
89#define BLM_PLAY_SCRIPT 5
90#define BLM_STOP_SCRIPT 6
91#define BLM_SET_FADE_SPEED 7
92#define BLM_SET_TIME_ADJ 8
93#define BLM_GET_CUR_RGB 9
94#define BLM_WRITE_SCRIPT_LINE 10
95#define BLM_READ_SCRIPT_LINE 11
96#define BLM_SET_SCRIPT_LR 12 /* Length & Repeats */
97#define BLM_SET_ADDR 13
98#define BLM_GET_ADDR 14
99#define BLM_GET_FW_VER 15
100#define BLM_SET_STARTUP_PARAM 16
101
102/* BlinkM Commands
103 * as extracted out of the datasheet:
104 *
105 * cmdchar = command (ascii)
106 * cmdbyte = command in hex
107 * nr_args = number of arguments (to send)
108 * nr_ret = number of return values (to read)
109 * dir = direction (0 = read, 1 = write, 2 = both)
110 *
111 */
112static const struct {
113 char cmdchar;
114 u8 cmdbyte;
115 u8 nr_args;
116 u8 nr_ret;
117 u8 dir:2;
118} blinkm_cmds[17] = {
119 /* cmdchar, cmdbyte, nr_args, nr_ret, dir */
120 { 'n', 0x6e, 3, 0, 1},
121 { 'c', 0x63, 3, 0, 1},
122 { 'h', 0x68, 3, 0, 1},
123 { 'C', 0x43, 3, 0, 1},
124 { 'H', 0x48, 3, 0, 1},
125 { 'p', 0x70, 3, 0, 1},
126 { 'o', 0x6f, 0, 0, 1},
127 { 'f', 0x66, 1, 0, 1},
128 { 't', 0x74, 1, 0, 1},
129 { 'g', 0x67, 0, 3, 0},
130 { 'W', 0x57, 7, 0, 1},
131 { 'R', 0x52, 2, 5, 2},
132 { 'L', 0x4c, 3, 0, 1},
133 { 'A', 0x41, 4, 0, 1},
134 { 'a', 0x61, 0, 1, 0},
135 { 'Z', 0x5a, 0, 1, 0},
136 { 'B', 0x42, 5, 0, 1},
137};
138
139static ssize_t show_color_common(struct device *dev, char *buf, int color)
140{
141 struct i2c_client *client;
142 struct blinkm_data *data;
143 int ret;
144
145 client = to_i2c_client(dev);
146 data = i2c_get_clientdata(client);
147
148 ret = blinkm_transfer_hw(client, BLM_GET_CUR_RGB);
149 if (ret < 0)
150 return ret;
151 switch (color) {
152 case RED:
153 return sysfs_emit(buf, "%02X\n", data->red);
154 case GREEN:
155 return sysfs_emit(buf, "%02X\n", data->green);
156 case BLUE:
157 return sysfs_emit(buf, "%02X\n", data->blue);
158 default:
159 return -EINVAL;
160 }
161 return -EINVAL;
162}
163
164static int store_color_common(struct device *dev, const char *buf, int color)
165{
166 struct i2c_client *client;
167 struct blinkm_data *data;
168 int ret;
169 u8 value;
170
171 client = to_i2c_client(dev);
172 data = i2c_get_clientdata(client);
173
174 ret = kstrtou8(buf, 10, &value);
175 if (ret < 0) {
176 dev_err(dev, "BlinkM: value too large!\n");
177 return ret;
178 }
179
180 switch (color) {
181 case RED:
182 data->next_red = value;
183 break;
184 case GREEN:
185 data->next_green = value;
186 break;
187 case BLUE:
188 data->next_blue = value;
189 break;
190 default:
191 return -EINVAL;
192 }
193
194 dev_dbg(dev, "next_red = %d, next_green = %d, next_blue = %d\n",
195 data->next_red, data->next_green, data->next_blue);
196
197 /* if mode ... */
198 ret = blinkm_transfer_hw(client, BLM_GO_RGB);
199 if (ret < 0) {
200 dev_err(dev, "BlinkM: can't set RGB\n");
201 return ret;
202 }
203 return 0;
204}
205
206static ssize_t red_show(struct device *dev, struct device_attribute *attr,
207 char *buf)
208{
209 return show_color_common(dev, buf, RED);
210}
211
212static ssize_t red_store(struct device *dev, struct device_attribute *attr,
213 const char *buf, size_t count)
214{
215 int ret;
216
217 ret = store_color_common(dev, buf, RED);
218 if (ret < 0)
219 return ret;
220 return count;
221}
222
223static DEVICE_ATTR_RW(red);
224
225static ssize_t green_show(struct device *dev, struct device_attribute *attr,
226 char *buf)
227{
228 return show_color_common(dev, buf, GREEN);
229}
230
231static ssize_t green_store(struct device *dev, struct device_attribute *attr,
232 const char *buf, size_t count)
233{
234
235 int ret;
236
237 ret = store_color_common(dev, buf, GREEN);
238 if (ret < 0)
239 return ret;
240 return count;
241}
242
243static DEVICE_ATTR_RW(green);
244
245static ssize_t blue_show(struct device *dev, struct device_attribute *attr,
246 char *buf)
247{
248 return show_color_common(dev, buf, BLUE);
249}
250
251static ssize_t blue_store(struct device *dev, struct device_attribute *attr,
252 const char *buf, size_t count)
253{
254 int ret;
255
256 ret = store_color_common(dev, buf, BLUE);
257 if (ret < 0)
258 return ret;
259 return count;
260}
261
262static DEVICE_ATTR_RW(blue);
263
264static ssize_t test_show(struct device *dev, struct device_attribute *attr,
265 char *buf)
266{
267 return sysfs_emit(buf,
268 "#Write into test to start test sequence!#\n");
269}
270
271static ssize_t test_store(struct device *dev, struct device_attribute *attr,
272 const char *buf, size_t count)
273{
274
275 struct i2c_client *client;
276 int ret;
277 client = to_i2c_client(dev);
278
279 /*test */
280 ret = blinkm_test_run(client);
281 if (ret < 0)
282 return ret;
283
284 return count;
285}
286
287static DEVICE_ATTR_RW(test);
288
289/* TODO: HSB, fade, timeadj, script ... */
290
291static struct attribute *blinkm_attrs[] = {
292 &dev_attr_red.attr,
293 &dev_attr_green.attr,
294 &dev_attr_blue.attr,
295 &dev_attr_test.attr,
296 NULL,
297};
298
299static const struct attribute_group blinkm_group = {
300 .name = "blinkm",
301 .attrs = blinkm_attrs,
302};
303
304static int blinkm_write(struct i2c_client *client, int cmd, u8 *arg)
305{
306 int result;
307 int i;
308 int arglen = blinkm_cmds[cmd].nr_args;
309 /* write out cmd to blinkm - always / default step */
310 result = i2c_smbus_write_byte(client, blinkm_cmds[cmd].cmdbyte);
311 if (result < 0)
312 return result;
313 /* no args to write out */
314 if (arglen == 0)
315 return 0;
316
317 for (i = 0; i < arglen; i++) {
318 /* repeat for arglen */
319 result = i2c_smbus_write_byte(client, arg[i]);
320 if (result < 0)
321 return result;
322 }
323 return 0;
324}
325
326static int blinkm_read(struct i2c_client *client, int cmd, u8 *arg)
327{
328 int result;
329 int i;
330 int retlen = blinkm_cmds[cmd].nr_ret;
331 for (i = 0; i < retlen; i++) {
332 /* repeat for retlen */
333 result = i2c_smbus_read_byte(client);
334 if (result < 0)
335 return result;
336 arg[i] = result;
337 }
338
339 return 0;
340}
341
342static int blinkm_transfer_hw(struct i2c_client *client, int cmd)
343{
344 /* the protocol is simple but non-standard:
345 * e.g. cmd 'g' (= 0x67) for "get device address"
346 * - which defaults to 0x09 - would be the sequence:
347 * a) write 0x67 to the device (byte write)
348 * b) read the value (0x09) back right after (byte read)
349 *
350 * Watch out for "unfinished" sequences (i.e. not enough reads
351 * or writes after a command. It will make the blinkM misbehave.
352 * Sequence is key here.
353 */
354
355 /* args / return are in private data struct */
356 struct blinkm_data *data = i2c_get_clientdata(client);
357
358 /* We start hardware transfers which are not to be
359 * mixed with other commands. Aquire a lock now. */
360 if (mutex_lock_interruptible(&data->update_lock) < 0)
361 return -EAGAIN;
362
363 /* switch cmd - usually write before reads */
364 switch (cmd) {
365 case BLM_FADE_RAND_RGB:
366 case BLM_GO_RGB:
367 case BLM_FADE_RGB:
368 data->args[0] = data->next_red;
369 data->args[1] = data->next_green;
370 data->args[2] = data->next_blue;
371 blinkm_write(client, cmd, data->args);
372 data->red = data->args[0];
373 data->green = data->args[1];
374 data->blue = data->args[2];
375 break;
376 case BLM_FADE_HSB:
377 case BLM_FADE_RAND_HSB:
378 data->args[0] = data->next_hue;
379 data->args[1] = data->next_saturation;
380 data->args[2] = data->next_brightness;
381 blinkm_write(client, cmd, data->args);
382 data->hue = data->next_hue;
383 data->saturation = data->next_saturation;
384 data->brightness = data->next_brightness;
385 break;
386 case BLM_PLAY_SCRIPT:
387 data->args[0] = data->script_id;
388 data->args[1] = data->script_repeats;
389 data->args[2] = data->script_startline;
390 blinkm_write(client, cmd, data->args);
391 break;
392 case BLM_STOP_SCRIPT:
393 blinkm_write(client, cmd, NULL);
394 break;
395 case BLM_GET_CUR_RGB:
396 data->args[0] = data->red;
397 data->args[1] = data->green;
398 data->args[2] = data->blue;
399 blinkm_write(client, cmd, NULL);
400 blinkm_read(client, cmd, data->args);
401 data->red = data->args[0];
402 data->green = data->args[1];
403 data->blue = data->args[2];
404 break;
405 case BLM_GET_ADDR:
406 data->args[0] = data->i2c_addr;
407 blinkm_write(client, cmd, NULL);
408 blinkm_read(client, cmd, data->args);
409 data->i2c_addr = data->args[0];
410 break;
411 case BLM_SET_TIME_ADJ:
412 case BLM_SET_FADE_SPEED:
413 case BLM_READ_SCRIPT_LINE:
414 case BLM_WRITE_SCRIPT_LINE:
415 case BLM_SET_SCRIPT_LR:
416 case BLM_SET_ADDR:
417 case BLM_GET_FW_VER:
418 case BLM_SET_STARTUP_PARAM:
419 dev_err(&client->dev,
420 "BlinkM: cmd %d not implemented yet.\n", cmd);
421 break;
422 default:
423 dev_err(&client->dev, "BlinkM: unknown command %d\n", cmd);
424 mutex_unlock(&data->update_lock);
425 return -EINVAL;
426 } /* end switch(cmd) */
427
428 /* transfers done, unlock */
429 mutex_unlock(&data->update_lock);
430 return 0;
431}
432
433static int blinkm_set_mc_brightness(struct led_classdev *led_cdev,
434 enum led_brightness value)
435{
436 struct led_classdev_mc *mcled_cdev = lcdev_to_mccdev(led_cdev);
437 struct blinkm_led *led = mcled_cdev_to_led(mcled_cdev);
438 struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);
439
440 led_mc_calc_color_components(mcled_cdev, value);
441
442 data->next_red = (u8) mcled_cdev->subled_info[RED].brightness;
443 data->next_green = (u8) mcled_cdev->subled_info[GREEN].brightness;
444 data->next_blue = (u8) mcled_cdev->subled_info[BLUE].brightness;
445
446 blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB);
447
448 return 0;
449}
450
451static int blinkm_led_common_set(struct led_classdev *led_cdev,
452 enum led_brightness value, int color)
453{
454 /* led_brightness is 0, 127 or 255 - we just use it here as-is */
455 struct blinkm_led *led = led_cdev_to_blmled(led_cdev);
456 struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);
457
458 switch (color) {
459 case RED:
460 /* bail out if there's no change */
461 if (data->next_red == (u8) value)
462 return 0;
463 data->next_red = (u8) value;
464 break;
465 case GREEN:
466 /* bail out if there's no change */
467 if (data->next_green == (u8) value)
468 return 0;
469 data->next_green = (u8) value;
470 break;
471 case BLUE:
472 /* bail out if there's no change */
473 if (data->next_blue == (u8) value)
474 return 0;
475 data->next_blue = (u8) value;
476 break;
477
478 default:
479 dev_err(&led->i2c_client->dev, "BlinkM: unknown color.\n");
480 return -EINVAL;
481 }
482
483 blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB);
484 dev_dbg(&led->i2c_client->dev,
485 "# DONE # next_red = %d, next_green = %d,"
486 " next_blue = %d\n",
487 data->next_red, data->next_green,
488 data->next_blue);
489 return 0;
490}
491
492static int blinkm_led_red_set(struct led_classdev *led_cdev,
493 enum led_brightness value)
494{
495 return blinkm_led_common_set(led_cdev, value, RED);
496}
497
498static int blinkm_led_green_set(struct led_classdev *led_cdev,
499 enum led_brightness value)
500{
501 return blinkm_led_common_set(led_cdev, value, GREEN);
502}
503
504static int blinkm_led_blue_set(struct led_classdev *led_cdev,
505 enum led_brightness value)
506{
507 return blinkm_led_common_set(led_cdev, value, BLUE);
508}
509
510static void blinkm_init_hw(struct i2c_client *client)
511{
512 blinkm_transfer_hw(client, BLM_STOP_SCRIPT);
513 blinkm_transfer_hw(client, BLM_GO_RGB);
514}
515
516static int blinkm_test_run(struct i2c_client *client)
517{
518 int ret;
519 struct blinkm_data *data = i2c_get_clientdata(client);
520
521 data->next_red = 0x01;
522 data->next_green = 0x05;
523 data->next_blue = 0x10;
524 ret = blinkm_transfer_hw(client, BLM_GO_RGB);
525 if (ret < 0)
526 return ret;
527 msleep(2000);
528
529 data->next_red = 0x25;
530 data->next_green = 0x10;
531 data->next_blue = 0x31;
532 ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
533 if (ret < 0)
534 return ret;
535 msleep(2000);
536
537 data->next_hue = 0x50;
538 data->next_saturation = 0x10;
539 data->next_brightness = 0x20;
540 ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
541 if (ret < 0)
542 return ret;
543 msleep(2000);
544
545 return 0;
546}
547
548/* Return 0 if detection is successful, -ENODEV otherwise */
549static int blinkm_detect(struct i2c_client *client, struct i2c_board_info *info)
550{
551 struct i2c_adapter *adapter = client->adapter;
552 int ret;
553 int count = 99;
554 u8 tmpargs[7];
555
556 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
557 | I2C_FUNC_SMBUS_WORD_DATA
558 | I2C_FUNC_SMBUS_WRITE_BYTE))
559 return -ENODEV;
560
561 /* Now, we do the remaining detection. Simple for now. */
562 /* We might need more guards to protect other i2c slaves */
563
564 /* make sure the blinkM is balanced (read/writes) */
565 while (count > 0) {
566 ret = blinkm_write(client, BLM_GET_ADDR, NULL);
567 if (ret)
568 return ret;
569 usleep_range(5000, 10000);
570 ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
571 if (ret)
572 return ret;
573 usleep_range(5000, 10000);
574 if (tmpargs[0] == 0x09)
575 count = 0;
576 count--;
577 }
578
579 /* Step 1: Read BlinkM address back - cmd_char 'a' */
580 ret = blinkm_write(client, BLM_GET_ADDR, NULL);
581 if (ret < 0)
582 return ret;
583 usleep_range(20000, 30000); /* allow a small delay */
584 ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
585 if (ret < 0)
586 return ret;
587
588 if (tmpargs[0] != 0x09) {
589 dev_err(&client->dev, "enodev DEV ADDR = 0x%02X\n", tmpargs[0]);
590 return -ENODEV;
591 }
592
593 strscpy(info->type, "blinkm", I2C_NAME_SIZE);
594 return 0;
595}
596
597static int register_separate_colors(struct i2c_client *client, struct blinkm_data *data)
598{
599 /* 3 separate classes for red, green, and blue respectively */
600 struct blinkm_led *leds[NUM_LEDS];
601 int err;
602 char blinkm_led_name[28];
603 /* Register red, green, and blue sysfs classes */
604 for (int i = 0; i < NUM_LEDS; i++) {
605 /* RED = 0, GREEN = 1, BLUE = 2 */
606 leds[i] = &data->blinkm_leds[i];
607 leds[i]->i2c_client = client;
608 leds[i]->id = i;
609 leds[i]->cdev.led_cdev.max_brightness = 255;
610 leds[i]->cdev.led_cdev.flags = LED_CORE_SUSPENDRESUME;
611 switch (i) {
612 case RED:
613 scnprintf(blinkm_led_name, sizeof(blinkm_led_name),
614 "blinkm-%d-%d-red",
615 client->adapter->nr,
616 client->addr);
617 leds[i]->cdev.led_cdev.name = blinkm_led_name;
618 leds[i]->cdev.led_cdev.brightness_set_blocking =
619 blinkm_led_red_set;
620 err = led_classdev_register(&client->dev,
621 &leds[i]->cdev.led_cdev);
622 if (err < 0) {
623 dev_err(&client->dev,
624 "couldn't register LED %s\n",
625 leds[i]->cdev.led_cdev.name);
626 goto failred;
627 }
628 break;
629 case GREEN:
630 scnprintf(blinkm_led_name, sizeof(blinkm_led_name),
631 "blinkm-%d-%d-green",
632 client->adapter->nr,
633 client->addr);
634 leds[i]->cdev.led_cdev.name = blinkm_led_name;
635 leds[i]->cdev.led_cdev.brightness_set_blocking =
636 blinkm_led_green_set;
637 err = led_classdev_register(&client->dev,
638 &leds[i]->cdev.led_cdev);
639 if (err < 0) {
640 dev_err(&client->dev,
641 "couldn't register LED %s\n",
642 leds[i]->cdev.led_cdev.name);
643 goto failgreen;
644 }
645 break;
646 case BLUE:
647 scnprintf(blinkm_led_name, sizeof(blinkm_led_name),
648 "blinkm-%d-%d-blue",
649 client->adapter->nr,
650 client->addr);
651 leds[i]->cdev.led_cdev.name = blinkm_led_name;
652 leds[i]->cdev.led_cdev.brightness_set_blocking =
653 blinkm_led_blue_set;
654 err = led_classdev_register(&client->dev,
655 &leds[i]->cdev.led_cdev);
656 if (err < 0) {
657 dev_err(&client->dev,
658 "couldn't register LED %s\n",
659 leds[i]->cdev.led_cdev.name);
660 goto failblue;
661 }
662 break;
663 default:
664 break;
665 } /* end switch */
666 } /* end for */
667 return 0;
668
669failblue:
670 led_classdev_unregister(&leds[GREEN]->cdev.led_cdev);
671failgreen:
672 led_classdev_unregister(&leds[RED]->cdev.led_cdev);
673failred:
674 sysfs_remove_group(&client->dev.kobj, &blinkm_group);
675
676 return err;
677}
678
679static int register_multicolor(struct i2c_client *client, struct blinkm_data *data)
680{
681 struct blinkm_led *mc_led;
682 struct mc_subled *mc_led_info;
683 char blinkm_led_name[28];
684 int err;
685
686 /* Register multicolor sysfs class */
687 /* The first element of leds is used for multicolor facilities */
688 mc_led = &data->blinkm_leds[RED];
689 mc_led->i2c_client = client;
690
691 mc_led_info = devm_kcalloc(&client->dev, NUM_LEDS, sizeof(*mc_led_info),
692 GFP_KERNEL);
693 if (!mc_led_info)
694 return -ENOMEM;
695
696 mc_led_info[RED].color_index = LED_COLOR_ID_RED;
697 mc_led_info[GREEN].color_index = LED_COLOR_ID_GREEN;
698 mc_led_info[BLUE].color_index = LED_COLOR_ID_BLUE;
699
700 mc_led->cdev.mcled_cdev.subled_info = mc_led_info;
701 mc_led->cdev.mcled_cdev.num_colors = NUM_LEDS;
702 mc_led->cdev.mcled_cdev.led_cdev.brightness = 255;
703 mc_led->cdev.mcled_cdev.led_cdev.max_brightness = 255;
704 mc_led->cdev.mcled_cdev.led_cdev.flags = LED_CORE_SUSPENDRESUME;
705
706 scnprintf(blinkm_led_name, sizeof(blinkm_led_name),
707 "blinkm-%d-%d:rgb:indicator",
708 client->adapter->nr,
709 client->addr);
710 mc_led->cdev.mcled_cdev.led_cdev.name = blinkm_led_name;
711 mc_led->cdev.mcled_cdev.led_cdev.brightness_set_blocking = blinkm_set_mc_brightness;
712
713 err = led_classdev_multicolor_register(&client->dev, &mc_led->cdev.mcled_cdev);
714 if (err < 0) {
715 dev_err(&client->dev, "couldn't register LED %s\n",
716 mc_led->cdev.led_cdev.name);
717 sysfs_remove_group(&client->dev.kobj, &blinkm_group);
718 }
719 return 0;
720}
721
722static int blinkm_probe(struct i2c_client *client)
723{
724 struct blinkm_data *data;
725 int err;
726
727 data = devm_kzalloc(&client->dev,
728 sizeof(struct blinkm_data), GFP_KERNEL);
729 if (!data)
730 return -ENOMEM;
731
732 data->i2c_addr = 0x08;
733 /* i2c addr - use fake addr of 0x08 initially (real is 0x09) */
734 data->fw_ver = 0xfe;
735 /* firmware version - use fake until we read real value
736 * (currently broken - BlinkM confused!)
737 */
738 data->script_id = 0x01;
739 data->i2c_client = client;
740
741 i2c_set_clientdata(client, data);
742 mutex_init(&data->update_lock);
743
744 /* Register sysfs hooks */
745 err = sysfs_create_group(&client->dev.kobj, &blinkm_group);
746 if (err < 0) {
747 dev_err(&client->dev, "couldn't register sysfs group\n");
748 return err;
749 }
750
751 if (!IS_ENABLED(CONFIG_LEDS_BLINKM_MULTICOLOR)) {
752 err = register_separate_colors(client, data);
753 if (err < 0)
754 return err;
755 } else {
756 err = register_multicolor(client, data);
757 if (err < 0)
758 return err;
759 }
760
761 blinkm_init_hw(client);
762
763 return 0;
764}
765
766static void blinkm_remove(struct i2c_client *client)
767{
768 struct blinkm_data *data = i2c_get_clientdata(client);
769 int ret = 0;
770 int i;
771
772 /* make sure no workqueue entries are pending */
773 for (i = 0; i < NUM_LEDS; i++)
774 led_classdev_unregister(&data->blinkm_leds[i].cdev.led_cdev);
775
776 /* reset rgb */
777 data->next_red = 0x00;
778 data->next_green = 0x00;
779 data->next_blue = 0x00;
780 ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
781 if (ret < 0)
782 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
783
784 /* reset hsb */
785 data->next_hue = 0x00;
786 data->next_saturation = 0x00;
787 data->next_brightness = 0x00;
788 ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
789 if (ret < 0)
790 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
791
792 /* red fade to off */
793 data->next_red = 0xff;
794 ret = blinkm_transfer_hw(client, BLM_GO_RGB);
795 if (ret < 0)
796 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
797
798 /* off */
799 data->next_red = 0x00;
800 ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
801 if (ret < 0)
802 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
803
804 sysfs_remove_group(&client->dev.kobj, &blinkm_group);
805}
806
807static const struct i2c_device_id blinkm_id[] = {
808 { "blinkm" },
809 {}
810};
811
812MODULE_DEVICE_TABLE(i2c, blinkm_id);
813
814 /* This is the driver that will be inserted */
815static struct i2c_driver blinkm_driver = {
816 .class = I2C_CLASS_HWMON,
817 .driver = {
818 .name = "blinkm",
819 },
820 .probe = blinkm_probe,
821 .remove = blinkm_remove,
822 .id_table = blinkm_id,
823 .detect = blinkm_detect,
824 .address_list = normal_i2c,
825};
826
827module_i2c_driver(blinkm_driver);
828
829MODULE_AUTHOR("Jan-Simon Moeller <dl9pf@gmx.de>");
830MODULE_AUTHOR("Joseph Strauss <jstrauss@mailbox.org>");
831MODULE_DESCRIPTION("BlinkM RGB LED driver");
832MODULE_LICENSE("GPL");
833