Loading...
Note: File does not exist in v3.5.6.
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * leds-blinkm.c
4 * (c) Jan-Simon Möller (dl9pf@gmx.de)
5 */
6
7#include <linux/module.h>
8#include <linux/slab.h>
9#include <linux/jiffies.h>
10#include <linux/i2c.h>
11#include <linux/err.h>
12#include <linux/mutex.h>
13#include <linux/sysfs.h>
14#include <linux/printk.h>
15#include <linux/pm_runtime.h>
16#include <linux/leds.h>
17#include <linux/delay.h>
18
19/* Addresses to scan - BlinkM is on 0x09 by default*/
20static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };
21
22static int blinkm_transfer_hw(struct i2c_client *client, int cmd);
23static int blinkm_test_run(struct i2c_client *client);
24
25struct blinkm_led {
26 struct i2c_client *i2c_client;
27 struct led_classdev led_cdev;
28 int id;
29};
30
31#define cdev_to_blmled(c) container_of(c, struct blinkm_led, led_cdev)
32
33struct blinkm_data {
34 struct i2c_client *i2c_client;
35 struct mutex update_lock;
36 /* used for led class interface */
37 struct blinkm_led blinkm_leds[3];
38 /* used for "blinkm" sysfs interface */
39 u8 red; /* color red */
40 u8 green; /* color green */
41 u8 blue; /* color blue */
42 /* next values to use for transfer */
43 u8 next_red; /* color red */
44 u8 next_green; /* color green */
45 u8 next_blue; /* color blue */
46 /* internal use */
47 u8 args[7]; /* set of args for transmission */
48 u8 i2c_addr; /* i2c addr */
49 u8 fw_ver; /* firmware version */
50 /* used, but not from userspace */
51 u8 hue; /* HSB hue */
52 u8 saturation; /* HSB saturation */
53 u8 brightness; /* HSB brightness */
54 u8 next_hue; /* HSB hue */
55 u8 next_saturation; /* HSB saturation */
56 u8 next_brightness; /* HSB brightness */
57 /* currently unused / todo */
58 u8 fade_speed; /* fade speed 1 - 255 */
59 s8 time_adjust; /* time adjust -128 - 127 */
60 u8 fade:1; /* fade on = 1, off = 0 */
61 u8 rand:1; /* rand fade mode on = 1 */
62 u8 script_id; /* script ID */
63 u8 script_repeats; /* repeats of script */
64 u8 script_startline; /* line to start */
65};
66
67/* Colors */
68#define RED 0
69#define GREEN 1
70#define BLUE 2
71
72/* mapping command names to cmd chars - see datasheet */
73#define BLM_GO_RGB 0
74#define BLM_FADE_RGB 1
75#define BLM_FADE_HSB 2
76#define BLM_FADE_RAND_RGB 3
77#define BLM_FADE_RAND_HSB 4
78#define BLM_PLAY_SCRIPT 5
79#define BLM_STOP_SCRIPT 6
80#define BLM_SET_FADE_SPEED 7
81#define BLM_SET_TIME_ADJ 8
82#define BLM_GET_CUR_RGB 9
83#define BLM_WRITE_SCRIPT_LINE 10
84#define BLM_READ_SCRIPT_LINE 11
85#define BLM_SET_SCRIPT_LR 12 /* Length & Repeats */
86#define BLM_SET_ADDR 13
87#define BLM_GET_ADDR 14
88#define BLM_GET_FW_VER 15
89#define BLM_SET_STARTUP_PARAM 16
90
91/* BlinkM Commands
92 * as extracted out of the datasheet:
93 *
94 * cmdchar = command (ascii)
95 * cmdbyte = command in hex
96 * nr_args = number of arguments (to send)
97 * nr_ret = number of return values (to read)
98 * dir = direction (0 = read, 1 = write, 2 = both)
99 *
100 */
101static const struct {
102 char cmdchar;
103 u8 cmdbyte;
104 u8 nr_args;
105 u8 nr_ret;
106 u8 dir:2;
107} blinkm_cmds[17] = {
108 /* cmdchar, cmdbyte, nr_args, nr_ret, dir */
109 { 'n', 0x6e, 3, 0, 1},
110 { 'c', 0x63, 3, 0, 1},
111 { 'h', 0x68, 3, 0, 1},
112 { 'C', 0x43, 3, 0, 1},
113 { 'H', 0x48, 3, 0, 1},
114 { 'p', 0x70, 3, 0, 1},
115 { 'o', 0x6f, 0, 0, 1},
116 { 'f', 0x66, 1, 0, 1},
117 { 't', 0x74, 1, 0, 1},
118 { 'g', 0x67, 0, 3, 0},
119 { 'W', 0x57, 7, 0, 1},
120 { 'R', 0x52, 2, 5, 2},
121 { 'L', 0x4c, 3, 0, 1},
122 { 'A', 0x41, 4, 0, 1},
123 { 'a', 0x61, 0, 1, 0},
124 { 'Z', 0x5a, 0, 1, 0},
125 { 'B', 0x42, 5, 0, 1},
126};
127
128static ssize_t show_color_common(struct device *dev, char *buf, int color)
129{
130 struct i2c_client *client;
131 struct blinkm_data *data;
132 int ret;
133
134 client = to_i2c_client(dev);
135 data = i2c_get_clientdata(client);
136
137 ret = blinkm_transfer_hw(client, BLM_GET_CUR_RGB);
138 if (ret < 0)
139 return ret;
140 switch (color) {
141 case RED:
142 return scnprintf(buf, PAGE_SIZE, "%02X\n", data->red);
143 case GREEN:
144 return scnprintf(buf, PAGE_SIZE, "%02X\n", data->green);
145 case BLUE:
146 return scnprintf(buf, PAGE_SIZE, "%02X\n", data->blue);
147 default:
148 return -EINVAL;
149 }
150 return -EINVAL;
151}
152
153static int store_color_common(struct device *dev, const char *buf, int color)
154{
155 struct i2c_client *client;
156 struct blinkm_data *data;
157 int ret;
158 u8 value;
159
160 client = to_i2c_client(dev);
161 data = i2c_get_clientdata(client);
162
163 ret = kstrtou8(buf, 10, &value);
164 if (ret < 0) {
165 dev_err(dev, "BlinkM: value too large!\n");
166 return ret;
167 }
168
169 switch (color) {
170 case RED:
171 data->next_red = value;
172 break;
173 case GREEN:
174 data->next_green = value;
175 break;
176 case BLUE:
177 data->next_blue = value;
178 break;
179 default:
180 return -EINVAL;
181 }
182
183 dev_dbg(dev, "next_red = %d, next_green = %d, next_blue = %d\n",
184 data->next_red, data->next_green, data->next_blue);
185
186 /* if mode ... */
187 ret = blinkm_transfer_hw(client, BLM_GO_RGB);
188 if (ret < 0) {
189 dev_err(dev, "BlinkM: can't set RGB\n");
190 return ret;
191 }
192 return 0;
193}
194
195static ssize_t show_red(struct device *dev, struct device_attribute *attr,
196 char *buf)
197{
198 return show_color_common(dev, buf, RED);
199}
200
201static ssize_t store_red(struct device *dev, struct device_attribute *attr,
202 const char *buf, size_t count)
203{
204 int ret;
205
206 ret = store_color_common(dev, buf, RED);
207 if (ret < 0)
208 return ret;
209 return count;
210}
211
212static DEVICE_ATTR(red, S_IRUGO | S_IWUSR, show_red, store_red);
213
214static ssize_t show_green(struct device *dev, struct device_attribute *attr,
215 char *buf)
216{
217 return show_color_common(dev, buf, GREEN);
218}
219
220static ssize_t store_green(struct device *dev, struct device_attribute *attr,
221 const char *buf, size_t count)
222{
223
224 int ret;
225
226 ret = store_color_common(dev, buf, GREEN);
227 if (ret < 0)
228 return ret;
229 return count;
230}
231
232static DEVICE_ATTR(green, S_IRUGO | S_IWUSR, show_green, store_green);
233
234static ssize_t show_blue(struct device *dev, struct device_attribute *attr,
235 char *buf)
236{
237 return show_color_common(dev, buf, BLUE);
238}
239
240static ssize_t store_blue(struct device *dev, struct device_attribute *attr,
241 const char *buf, size_t count)
242{
243 int ret;
244
245 ret = store_color_common(dev, buf, BLUE);
246 if (ret < 0)
247 return ret;
248 return count;
249}
250
251static DEVICE_ATTR(blue, S_IRUGO | S_IWUSR, show_blue, store_blue);
252
253static ssize_t show_test(struct device *dev, struct device_attribute *attr,
254 char *buf)
255{
256 return scnprintf(buf, PAGE_SIZE,
257 "#Write into test to start test sequence!#\n");
258}
259
260static ssize_t store_test(struct device *dev, struct device_attribute *attr,
261 const char *buf, size_t count)
262{
263
264 struct i2c_client *client;
265 int ret;
266 client = to_i2c_client(dev);
267
268 /*test */
269 ret = blinkm_test_run(client);
270 if (ret < 0)
271 return ret;
272
273 return count;
274}
275
276static DEVICE_ATTR(test, S_IRUGO | S_IWUSR, show_test, store_test);
277
278/* TODO: HSB, fade, timeadj, script ... */
279
280static struct attribute *blinkm_attrs[] = {
281 &dev_attr_red.attr,
282 &dev_attr_green.attr,
283 &dev_attr_blue.attr,
284 &dev_attr_test.attr,
285 NULL,
286};
287
288static const struct attribute_group blinkm_group = {
289 .name = "blinkm",
290 .attrs = blinkm_attrs,
291};
292
293static int blinkm_write(struct i2c_client *client, int cmd, u8 *arg)
294{
295 int result;
296 int i;
297 int arglen = blinkm_cmds[cmd].nr_args;
298 /* write out cmd to blinkm - always / default step */
299 result = i2c_smbus_write_byte(client, blinkm_cmds[cmd].cmdbyte);
300 if (result < 0)
301 return result;
302 /* no args to write out */
303 if (arglen == 0)
304 return 0;
305
306 for (i = 0; i < arglen; i++) {
307 /* repeat for arglen */
308 result = i2c_smbus_write_byte(client, arg[i]);
309 if (result < 0)
310 return result;
311 }
312 return 0;
313}
314
315static int blinkm_read(struct i2c_client *client, int cmd, u8 *arg)
316{
317 int result;
318 int i;
319 int retlen = blinkm_cmds[cmd].nr_ret;
320 for (i = 0; i < retlen; i++) {
321 /* repeat for retlen */
322 result = i2c_smbus_read_byte(client);
323 if (result < 0)
324 return result;
325 arg[i] = result;
326 }
327
328 return 0;
329}
330
331static int blinkm_transfer_hw(struct i2c_client *client, int cmd)
332{
333 /* the protocol is simple but non-standard:
334 * e.g. cmd 'g' (= 0x67) for "get device address"
335 * - which defaults to 0x09 - would be the sequence:
336 * a) write 0x67 to the device (byte write)
337 * b) read the value (0x09) back right after (byte read)
338 *
339 * Watch out for "unfinished" sequences (i.e. not enough reads
340 * or writes after a command. It will make the blinkM misbehave.
341 * Sequence is key here.
342 */
343
344 /* args / return are in private data struct */
345 struct blinkm_data *data = i2c_get_clientdata(client);
346
347 /* We start hardware transfers which are not to be
348 * mixed with other commands. Aquire a lock now. */
349 if (mutex_lock_interruptible(&data->update_lock) < 0)
350 return -EAGAIN;
351
352 /* switch cmd - usually write before reads */
353 switch (cmd) {
354 case BLM_FADE_RAND_RGB:
355 case BLM_GO_RGB:
356 case BLM_FADE_RGB:
357 data->args[0] = data->next_red;
358 data->args[1] = data->next_green;
359 data->args[2] = data->next_blue;
360 blinkm_write(client, cmd, data->args);
361 data->red = data->args[0];
362 data->green = data->args[1];
363 data->blue = data->args[2];
364 break;
365 case BLM_FADE_HSB:
366 case BLM_FADE_RAND_HSB:
367 data->args[0] = data->next_hue;
368 data->args[1] = data->next_saturation;
369 data->args[2] = data->next_brightness;
370 blinkm_write(client, cmd, data->args);
371 data->hue = data->next_hue;
372 data->saturation = data->next_saturation;
373 data->brightness = data->next_brightness;
374 break;
375 case BLM_PLAY_SCRIPT:
376 data->args[0] = data->script_id;
377 data->args[1] = data->script_repeats;
378 data->args[2] = data->script_startline;
379 blinkm_write(client, cmd, data->args);
380 break;
381 case BLM_STOP_SCRIPT:
382 blinkm_write(client, cmd, NULL);
383 break;
384 case BLM_GET_CUR_RGB:
385 data->args[0] = data->red;
386 data->args[1] = data->green;
387 data->args[2] = data->blue;
388 blinkm_write(client, cmd, NULL);
389 blinkm_read(client, cmd, data->args);
390 data->red = data->args[0];
391 data->green = data->args[1];
392 data->blue = data->args[2];
393 break;
394 case BLM_GET_ADDR:
395 data->args[0] = data->i2c_addr;
396 blinkm_write(client, cmd, NULL);
397 blinkm_read(client, cmd, data->args);
398 data->i2c_addr = data->args[0];
399 break;
400 case BLM_SET_TIME_ADJ:
401 case BLM_SET_FADE_SPEED:
402 case BLM_READ_SCRIPT_LINE:
403 case BLM_WRITE_SCRIPT_LINE:
404 case BLM_SET_SCRIPT_LR:
405 case BLM_SET_ADDR:
406 case BLM_GET_FW_VER:
407 case BLM_SET_STARTUP_PARAM:
408 dev_err(&client->dev,
409 "BlinkM: cmd %d not implemented yet.\n", cmd);
410 break;
411 default:
412 dev_err(&client->dev, "BlinkM: unknown command %d\n", cmd);
413 mutex_unlock(&data->update_lock);
414 return -EINVAL;
415 } /* end switch(cmd) */
416
417 /* transfers done, unlock */
418 mutex_unlock(&data->update_lock);
419 return 0;
420}
421
422static int blinkm_led_common_set(struct led_classdev *led_cdev,
423 enum led_brightness value, int color)
424{
425 /* led_brightness is 0, 127 or 255 - we just use it here as-is */
426 struct blinkm_led *led = cdev_to_blmled(led_cdev);
427 struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);
428
429 switch (color) {
430 case RED:
431 /* bail out if there's no change */
432 if (data->next_red == (u8) value)
433 return 0;
434 data->next_red = (u8) value;
435 break;
436 case GREEN:
437 /* bail out if there's no change */
438 if (data->next_green == (u8) value)
439 return 0;
440 data->next_green = (u8) value;
441 break;
442 case BLUE:
443 /* bail out if there's no change */
444 if (data->next_blue == (u8) value)
445 return 0;
446 data->next_blue = (u8) value;
447 break;
448
449 default:
450 dev_err(&led->i2c_client->dev, "BlinkM: unknown color.\n");
451 return -EINVAL;
452 }
453
454 blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB);
455 dev_dbg(&led->i2c_client->dev,
456 "# DONE # next_red = %d, next_green = %d,"
457 " next_blue = %d\n",
458 data->next_red, data->next_green,
459 data->next_blue);
460 return 0;
461}
462
463static int blinkm_led_red_set(struct led_classdev *led_cdev,
464 enum led_brightness value)
465{
466 return blinkm_led_common_set(led_cdev, value, RED);
467}
468
469static int blinkm_led_green_set(struct led_classdev *led_cdev,
470 enum led_brightness value)
471{
472 return blinkm_led_common_set(led_cdev, value, GREEN);
473}
474
475static int blinkm_led_blue_set(struct led_classdev *led_cdev,
476 enum led_brightness value)
477{
478 return blinkm_led_common_set(led_cdev, value, BLUE);
479}
480
481static void blinkm_init_hw(struct i2c_client *client)
482{
483 int ret;
484 ret = blinkm_transfer_hw(client, BLM_STOP_SCRIPT);
485 ret = blinkm_transfer_hw(client, BLM_GO_RGB);
486}
487
488static int blinkm_test_run(struct i2c_client *client)
489{
490 int ret;
491 struct blinkm_data *data = i2c_get_clientdata(client);
492
493 data->next_red = 0x01;
494 data->next_green = 0x05;
495 data->next_blue = 0x10;
496 ret = blinkm_transfer_hw(client, BLM_GO_RGB);
497 if (ret < 0)
498 return ret;
499 msleep(2000);
500
501 data->next_red = 0x25;
502 data->next_green = 0x10;
503 data->next_blue = 0x31;
504 ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
505 if (ret < 0)
506 return ret;
507 msleep(2000);
508
509 data->next_hue = 0x50;
510 data->next_saturation = 0x10;
511 data->next_brightness = 0x20;
512 ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
513 if (ret < 0)
514 return ret;
515 msleep(2000);
516
517 return 0;
518}
519
520/* Return 0 if detection is successful, -ENODEV otherwise */
521static int blinkm_detect(struct i2c_client *client, struct i2c_board_info *info)
522{
523 struct i2c_adapter *adapter = client->adapter;
524 int ret;
525 int count = 99;
526 u8 tmpargs[7];
527
528 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
529 | I2C_FUNC_SMBUS_WORD_DATA
530 | I2C_FUNC_SMBUS_WRITE_BYTE))
531 return -ENODEV;
532
533 /* Now, we do the remaining detection. Simple for now. */
534 /* We might need more guards to protect other i2c slaves */
535
536 /* make sure the blinkM is balanced (read/writes) */
537 while (count > 0) {
538 ret = blinkm_write(client, BLM_GET_ADDR, NULL);
539 if (ret)
540 return ret;
541 usleep_range(5000, 10000);
542 ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
543 if (ret)
544 return ret;
545 usleep_range(5000, 10000);
546 if (tmpargs[0] == 0x09)
547 count = 0;
548 count--;
549 }
550
551 /* Step 1: Read BlinkM address back - cmd_char 'a' */
552 ret = blinkm_write(client, BLM_GET_ADDR, NULL);
553 if (ret < 0)
554 return ret;
555 usleep_range(20000, 30000); /* allow a small delay */
556 ret = blinkm_read(client, BLM_GET_ADDR, tmpargs);
557 if (ret < 0)
558 return ret;
559
560 if (tmpargs[0] != 0x09) {
561 dev_err(&client->dev, "enodev DEV ADDR = 0x%02X\n", tmpargs[0]);
562 return -ENODEV;
563 }
564
565 strlcpy(info->type, "blinkm", I2C_NAME_SIZE);
566 return 0;
567}
568
569static int blinkm_probe(struct i2c_client *client,
570 const struct i2c_device_id *id)
571{
572 struct blinkm_data *data;
573 struct blinkm_led *led[3];
574 int err, i;
575 char blinkm_led_name[28];
576
577 data = devm_kzalloc(&client->dev,
578 sizeof(struct blinkm_data), GFP_KERNEL);
579 if (!data) {
580 err = -ENOMEM;
581 goto exit;
582 }
583
584 data->i2c_addr = 0x08;
585 /* i2c addr - use fake addr of 0x08 initially (real is 0x09) */
586 data->fw_ver = 0xfe;
587 /* firmware version - use fake until we read real value
588 * (currently broken - BlinkM confused!) */
589 data->script_id = 0x01;
590 data->i2c_client = client;
591
592 i2c_set_clientdata(client, data);
593 mutex_init(&data->update_lock);
594
595 /* Register sysfs hooks */
596 err = sysfs_create_group(&client->dev.kobj, &blinkm_group);
597 if (err < 0) {
598 dev_err(&client->dev, "couldn't register sysfs group\n");
599 goto exit;
600 }
601
602 for (i = 0; i < 3; i++) {
603 /* RED = 0, GREEN = 1, BLUE = 2 */
604 led[i] = &data->blinkm_leds[i];
605 led[i]->i2c_client = client;
606 led[i]->id = i;
607 led[i]->led_cdev.max_brightness = 255;
608 led[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME;
609 switch (i) {
610 case RED:
611 snprintf(blinkm_led_name, sizeof(blinkm_led_name),
612 "blinkm-%d-%d-red",
613 client->adapter->nr,
614 client->addr);
615 led[i]->led_cdev.name = blinkm_led_name;
616 led[i]->led_cdev.brightness_set_blocking =
617 blinkm_led_red_set;
618 err = led_classdev_register(&client->dev,
619 &led[i]->led_cdev);
620 if (err < 0) {
621 dev_err(&client->dev,
622 "couldn't register LED %s\n",
623 led[i]->led_cdev.name);
624 goto failred;
625 }
626 break;
627 case GREEN:
628 snprintf(blinkm_led_name, sizeof(blinkm_led_name),
629 "blinkm-%d-%d-green",
630 client->adapter->nr,
631 client->addr);
632 led[i]->led_cdev.name = blinkm_led_name;
633 led[i]->led_cdev.brightness_set_blocking =
634 blinkm_led_green_set;
635 err = led_classdev_register(&client->dev,
636 &led[i]->led_cdev);
637 if (err < 0) {
638 dev_err(&client->dev,
639 "couldn't register LED %s\n",
640 led[i]->led_cdev.name);
641 goto failgreen;
642 }
643 break;
644 case BLUE:
645 snprintf(blinkm_led_name, sizeof(blinkm_led_name),
646 "blinkm-%d-%d-blue",
647 client->adapter->nr,
648 client->addr);
649 led[i]->led_cdev.name = blinkm_led_name;
650 led[i]->led_cdev.brightness_set_blocking =
651 blinkm_led_blue_set;
652 err = led_classdev_register(&client->dev,
653 &led[i]->led_cdev);
654 if (err < 0) {
655 dev_err(&client->dev,
656 "couldn't register LED %s\n",
657 led[i]->led_cdev.name);
658 goto failblue;
659 }
660 break;
661 } /* end switch */
662 } /* end for */
663
664 /* Initialize the blinkm */
665 blinkm_init_hw(client);
666
667 return 0;
668
669failblue:
670 led_classdev_unregister(&led[GREEN]->led_cdev);
671
672failgreen:
673 led_classdev_unregister(&led[RED]->led_cdev);
674
675failred:
676 sysfs_remove_group(&client->dev.kobj, &blinkm_group);
677exit:
678 return err;
679}
680
681static int blinkm_remove(struct i2c_client *client)
682{
683 struct blinkm_data *data = i2c_get_clientdata(client);
684 int ret = 0;
685 int i;
686
687 /* make sure no workqueue entries are pending */
688 for (i = 0; i < 3; i++)
689 led_classdev_unregister(&data->blinkm_leds[i].led_cdev);
690
691 /* reset rgb */
692 data->next_red = 0x00;
693 data->next_green = 0x00;
694 data->next_blue = 0x00;
695 ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
696 if (ret < 0)
697 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
698
699 /* reset hsb */
700 data->next_hue = 0x00;
701 data->next_saturation = 0x00;
702 data->next_brightness = 0x00;
703 ret = blinkm_transfer_hw(client, BLM_FADE_HSB);
704 if (ret < 0)
705 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
706
707 /* red fade to off */
708 data->next_red = 0xff;
709 ret = blinkm_transfer_hw(client, BLM_GO_RGB);
710 if (ret < 0)
711 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
712
713 /* off */
714 data->next_red = 0x00;
715 ret = blinkm_transfer_hw(client, BLM_FADE_RGB);
716 if (ret < 0)
717 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n");
718
719 sysfs_remove_group(&client->dev.kobj, &blinkm_group);
720 return 0;
721}
722
723static const struct i2c_device_id blinkm_id[] = {
724 {"blinkm", 0},
725 {}
726};
727
728MODULE_DEVICE_TABLE(i2c, blinkm_id);
729
730 /* This is the driver that will be inserted */
731static struct i2c_driver blinkm_driver = {
732 .class = I2C_CLASS_HWMON,
733 .driver = {
734 .name = "blinkm",
735 },
736 .probe = blinkm_probe,
737 .remove = blinkm_remove,
738 .id_table = blinkm_id,
739 .detect = blinkm_detect,
740 .address_list = normal_i2c,
741};
742
743module_i2c_driver(blinkm_driver);
744
745MODULE_AUTHOR("Jan-Simon Moeller <dl9pf@gmx.de>");
746MODULE_DESCRIPTION("BlinkM RGB LED driver");
747MODULE_LICENSE("GPL");
748