Loading...
1/*
2 * Interrupt request handling routines. On the
3 * Sparc the IRQs are basically 'cast in stone'
4 * and you are supposed to probe the prom's device
5 * node trees to find out who's got which IRQ.
6 *
7 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
8 * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
9 * Copyright (C) 1995,2002 Pete A. Zaitcev (zaitcev@yahoo.com)
10 * Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
11 * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org)
12 */
13
14#include <linux/kernel_stat.h>
15#include <linux/seq_file.h>
16#include <linux/export.h>
17
18#include <asm/cacheflush.h>
19#include <asm/cpudata.h>
20#include <asm/pcic.h>
21#include <asm/leon.h>
22
23#include "kernel.h"
24#include "irq.h"
25
26/* platform specific irq setup */
27struct sparc_config sparc_config;
28
29unsigned long arch_local_irq_save(void)
30{
31 unsigned long retval;
32 unsigned long tmp;
33
34 __asm__ __volatile__(
35 "rd %%psr, %0\n\t"
36 "or %0, %2, %1\n\t"
37 "wr %1, 0, %%psr\n\t"
38 "nop; nop; nop\n"
39 : "=&r" (retval), "=r" (tmp)
40 : "i" (PSR_PIL)
41 : "memory");
42
43 return retval;
44}
45EXPORT_SYMBOL(arch_local_irq_save);
46
47void arch_local_irq_enable(void)
48{
49 unsigned long tmp;
50
51 __asm__ __volatile__(
52 "rd %%psr, %0\n\t"
53 "andn %0, %1, %0\n\t"
54 "wr %0, 0, %%psr\n\t"
55 "nop; nop; nop\n"
56 : "=&r" (tmp)
57 : "i" (PSR_PIL)
58 : "memory");
59}
60EXPORT_SYMBOL(arch_local_irq_enable);
61
62void arch_local_irq_restore(unsigned long old_psr)
63{
64 unsigned long tmp;
65
66 __asm__ __volatile__(
67 "rd %%psr, %0\n\t"
68 "and %2, %1, %2\n\t"
69 "andn %0, %1, %0\n\t"
70 "wr %0, %2, %%psr\n\t"
71 "nop; nop; nop\n"
72 : "=&r" (tmp)
73 : "i" (PSR_PIL), "r" (old_psr)
74 : "memory");
75}
76EXPORT_SYMBOL(arch_local_irq_restore);
77
78/*
79 * Dave Redman (djhr@tadpole.co.uk)
80 *
81 * IRQ numbers.. These are no longer restricted to 15..
82 *
83 * this is done to enable SBUS cards and onboard IO to be masked
84 * correctly. using the interrupt level isn't good enough.
85 *
86 * For example:
87 * A device interrupting at sbus level6 and the Floppy both come in
88 * at IRQ11, but enabling and disabling them requires writing to
89 * different bits in the SLAVIO/SEC.
90 *
91 * As a result of these changes sun4m machines could now support
92 * directed CPU interrupts using the existing enable/disable irq code
93 * with tweaks.
94 *
95 * Sun4d complicates things even further. IRQ numbers are arbitrary
96 * 32-bit values in that case. Since this is similar to sparc64,
97 * we adopt a virtual IRQ numbering scheme as is done there.
98 * Virutal interrupt numbers are allocated by build_irq(). So NR_IRQS
99 * just becomes a limit of how many interrupt sources we can handle in
100 * a single system. Even fully loaded SS2000 machines top off at
101 * about 32 interrupt sources or so, therefore a NR_IRQS value of 64
102 * is more than enough.
103 *
104 * We keep a map of per-PIL enable interrupts. These get wired
105 * up via the irq_chip->startup() method which gets invoked by
106 * the generic IRQ layer during request_irq().
107 */
108
109
110/* Table of allocated irqs. Unused entries has irq == 0 */
111static struct irq_bucket irq_table[NR_IRQS];
112/* Protect access to irq_table */
113static DEFINE_SPINLOCK(irq_table_lock);
114
115/* Map between the irq identifier used in hw to the irq_bucket. */
116struct irq_bucket *irq_map[SUN4D_MAX_IRQ];
117/* Protect access to irq_map */
118static DEFINE_SPINLOCK(irq_map_lock);
119
120/* Allocate a new irq from the irq_table */
121unsigned int irq_alloc(unsigned int real_irq, unsigned int pil)
122{
123 unsigned long flags;
124 unsigned int i;
125
126 spin_lock_irqsave(&irq_table_lock, flags);
127 for (i = 1; i < NR_IRQS; i++) {
128 if (irq_table[i].real_irq == real_irq && irq_table[i].pil == pil)
129 goto found;
130 }
131
132 for (i = 1; i < NR_IRQS; i++) {
133 if (!irq_table[i].irq)
134 break;
135 }
136
137 if (i < NR_IRQS) {
138 irq_table[i].real_irq = real_irq;
139 irq_table[i].irq = i;
140 irq_table[i].pil = pil;
141 } else {
142 printk(KERN_ERR "IRQ: Out of virtual IRQs.\n");
143 i = 0;
144 }
145found:
146 spin_unlock_irqrestore(&irq_table_lock, flags);
147
148 return i;
149}
150
151/* Based on a single pil handler_irq may need to call several
152 * interrupt handlers. Use irq_map as entry to irq_table,
153 * and let each entry in irq_table point to the next entry.
154 */
155void irq_link(unsigned int irq)
156{
157 struct irq_bucket *p;
158 unsigned long flags;
159 unsigned int pil;
160
161 BUG_ON(irq >= NR_IRQS);
162
163 spin_lock_irqsave(&irq_map_lock, flags);
164
165 p = &irq_table[irq];
166 pil = p->pil;
167 BUG_ON(pil > SUN4D_MAX_IRQ);
168 p->next = irq_map[pil];
169 irq_map[pil] = p;
170
171 spin_unlock_irqrestore(&irq_map_lock, flags);
172}
173
174void irq_unlink(unsigned int irq)
175{
176 struct irq_bucket *p, **pnext;
177 unsigned long flags;
178
179 BUG_ON(irq >= NR_IRQS);
180
181 spin_lock_irqsave(&irq_map_lock, flags);
182
183 p = &irq_table[irq];
184 BUG_ON(p->pil > SUN4D_MAX_IRQ);
185 pnext = &irq_map[p->pil];
186 while (*pnext != p)
187 pnext = &(*pnext)->next;
188 *pnext = p->next;
189
190 spin_unlock_irqrestore(&irq_map_lock, flags);
191}
192
193
194/* /proc/interrupts printing */
195int arch_show_interrupts(struct seq_file *p, int prec)
196{
197 int j;
198
199#ifdef CONFIG_SMP
200 seq_printf(p, "RES: ");
201 for_each_online_cpu(j)
202 seq_printf(p, "%10u ", cpu_data(j).irq_resched_count);
203 seq_printf(p, " IPI rescheduling interrupts\n");
204 seq_printf(p, "CAL: ");
205 for_each_online_cpu(j)
206 seq_printf(p, "%10u ", cpu_data(j).irq_call_count);
207 seq_printf(p, " IPI function call interrupts\n");
208#endif
209 seq_printf(p, "NMI: ");
210 for_each_online_cpu(j)
211 seq_printf(p, "%10u ", cpu_data(j).counter);
212 seq_printf(p, " Non-maskable interrupts\n");
213 return 0;
214}
215
216void handler_irq(unsigned int pil, struct pt_regs *regs)
217{
218 struct pt_regs *old_regs;
219 struct irq_bucket *p;
220
221 BUG_ON(pil > 15);
222 old_regs = set_irq_regs(regs);
223 irq_enter();
224
225 p = irq_map[pil];
226 while (p) {
227 struct irq_bucket *next = p->next;
228
229 generic_handle_irq(p->irq);
230 p = next;
231 }
232 irq_exit();
233 set_irq_regs(old_regs);
234}
235
236#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
237static unsigned int floppy_irq;
238
239int sparc_floppy_request_irq(unsigned int irq, irq_handler_t irq_handler)
240{
241 unsigned int cpu_irq;
242 int err;
243
244
245 err = request_irq(irq, irq_handler, 0, "floppy", NULL);
246 if (err)
247 return -1;
248
249 /* Save for later use in floppy interrupt handler */
250 floppy_irq = irq;
251
252 cpu_irq = (irq & (NR_IRQS - 1));
253
254 /* Dork with trap table if we get this far. */
255#define INSTANTIATE(table) \
256 table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_one = SPARC_RD_PSR_L0; \
257 table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_two = \
258 SPARC_BRANCH((unsigned long) floppy_hardint, \
259 (unsigned long) &table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_two);\
260 table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_three = SPARC_RD_WIM_L3; \
261 table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_four = SPARC_NOP;
262
263 INSTANTIATE(sparc_ttable)
264
265#if defined CONFIG_SMP
266 if (sparc_cpu_model != sparc_leon) {
267 struct tt_entry *trap_table;
268
269 trap_table = &trapbase_cpu1;
270 INSTANTIATE(trap_table)
271 trap_table = &trapbase_cpu2;
272 INSTANTIATE(trap_table)
273 trap_table = &trapbase_cpu3;
274 INSTANTIATE(trap_table)
275 }
276#endif
277#undef INSTANTIATE
278 /*
279 * XXX Correct thing whould be to flush only I- and D-cache lines
280 * which contain the handler in question. But as of time of the
281 * writing we have no CPU-neutral interface to fine-grained flushes.
282 */
283 flush_cache_all();
284 return 0;
285}
286EXPORT_SYMBOL(sparc_floppy_request_irq);
287
288/*
289 * These variables are used to access state from the assembler
290 * interrupt handler, floppy_hardint, so we cannot put these in
291 * the floppy driver image because that would not work in the
292 * modular case.
293 */
294volatile unsigned char *fdc_status;
295EXPORT_SYMBOL(fdc_status);
296
297char *pdma_vaddr;
298EXPORT_SYMBOL(pdma_vaddr);
299
300unsigned long pdma_size;
301EXPORT_SYMBOL(pdma_size);
302
303volatile int doing_pdma;
304EXPORT_SYMBOL(doing_pdma);
305
306char *pdma_base;
307EXPORT_SYMBOL(pdma_base);
308
309unsigned long pdma_areasize;
310EXPORT_SYMBOL(pdma_areasize);
311
312/* Use the generic irq support to call floppy_interrupt
313 * which was setup using request_irq() in sparc_floppy_request_irq().
314 * We only have one floppy interrupt so we do not need to check
315 * for additional handlers being wired up by irq_link()
316 */
317void sparc_floppy_irq(int irq, void *dev_id, struct pt_regs *regs)
318{
319 struct pt_regs *old_regs;
320
321 old_regs = set_irq_regs(regs);
322 irq_enter();
323 generic_handle_irq(floppy_irq);
324 irq_exit();
325 set_irq_regs(old_regs);
326}
327#endif
328
329/* djhr
330 * This could probably be made indirect too and assigned in the CPU
331 * bits of the code. That would be much nicer I think and would also
332 * fit in with the idea of being able to tune your kernel for your machine
333 * by removing unrequired machine and device support.
334 *
335 */
336
337void __init init_IRQ(void)
338{
339 switch (sparc_cpu_model) {
340 case sun4m:
341 pcic_probe();
342 if (pcic_present())
343 sun4m_pci_init_IRQ();
344 else
345 sun4m_init_IRQ();
346 break;
347
348 case sun4d:
349 sun4d_init_IRQ();
350 break;
351
352 case sparc_leon:
353 leon_init_IRQ();
354 break;
355
356 default:
357 prom_printf("Cannot initialize IRQs on this Sun machine...");
358 break;
359 }
360}
361
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Interrupt request handling routines. On the
4 * Sparc the IRQs are basically 'cast in stone'
5 * and you are supposed to probe the prom's device
6 * node trees to find out who's got which IRQ.
7 *
8 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
9 * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
10 * Copyright (C) 1995,2002 Pete A. Zaitcev (zaitcev@yahoo.com)
11 * Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
12 * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org)
13 */
14
15#include <linux/kernel_stat.h>
16#include <linux/seq_file.h>
17#include <linux/export.h>
18
19#include <asm/cacheflush.h>
20#include <asm/cpudata.h>
21#include <asm/setup.h>
22#include <asm/pcic.h>
23#include <asm/leon.h>
24
25#include "kernel.h"
26#include "irq.h"
27
28/* platform specific irq setup */
29struct sparc_config sparc_config;
30
31unsigned long arch_local_irq_save(void)
32{
33 unsigned long retval;
34 unsigned long tmp;
35
36 __asm__ __volatile__(
37 "rd %%psr, %0\n\t"
38 "or %0, %2, %1\n\t"
39 "wr %1, 0, %%psr\n\t"
40 "nop; nop; nop\n"
41 : "=&r" (retval), "=r" (tmp)
42 : "i" (PSR_PIL)
43 : "memory");
44
45 return retval;
46}
47EXPORT_SYMBOL(arch_local_irq_save);
48
49void arch_local_irq_enable(void)
50{
51 unsigned long tmp;
52
53 __asm__ __volatile__(
54 "rd %%psr, %0\n\t"
55 "andn %0, %1, %0\n\t"
56 "wr %0, 0, %%psr\n\t"
57 "nop; nop; nop\n"
58 : "=&r" (tmp)
59 : "i" (PSR_PIL)
60 : "memory");
61}
62EXPORT_SYMBOL(arch_local_irq_enable);
63
64void arch_local_irq_restore(unsigned long old_psr)
65{
66 unsigned long tmp;
67
68 __asm__ __volatile__(
69 "rd %%psr, %0\n\t"
70 "and %2, %1, %2\n\t"
71 "andn %0, %1, %0\n\t"
72 "wr %0, %2, %%psr\n\t"
73 "nop; nop; nop\n"
74 : "=&r" (tmp)
75 : "i" (PSR_PIL), "r" (old_psr)
76 : "memory");
77}
78EXPORT_SYMBOL(arch_local_irq_restore);
79
80/*
81 * Dave Redman (djhr@tadpole.co.uk)
82 *
83 * IRQ numbers.. These are no longer restricted to 15..
84 *
85 * this is done to enable SBUS cards and onboard IO to be masked
86 * correctly. using the interrupt level isn't good enough.
87 *
88 * For example:
89 * A device interrupting at sbus level6 and the Floppy both come in
90 * at IRQ11, but enabling and disabling them requires writing to
91 * different bits in the SLAVIO/SEC.
92 *
93 * As a result of these changes sun4m machines could now support
94 * directed CPU interrupts using the existing enable/disable irq code
95 * with tweaks.
96 *
97 * Sun4d complicates things even further. IRQ numbers are arbitrary
98 * 32-bit values in that case. Since this is similar to sparc64,
99 * we adopt a virtual IRQ numbering scheme as is done there.
100 * Virutal interrupt numbers are allocated by build_irq(). So NR_IRQS
101 * just becomes a limit of how many interrupt sources we can handle in
102 * a single system. Even fully loaded SS2000 machines top off at
103 * about 32 interrupt sources or so, therefore a NR_IRQS value of 64
104 * is more than enough.
105 *
106 * We keep a map of per-PIL enable interrupts. These get wired
107 * up via the irq_chip->startup() method which gets invoked by
108 * the generic IRQ layer during request_irq().
109 */
110
111
112/* Table of allocated irqs. Unused entries has irq == 0 */
113static struct irq_bucket irq_table[NR_IRQS];
114/* Protect access to irq_table */
115static DEFINE_SPINLOCK(irq_table_lock);
116
117/* Map between the irq identifier used in hw to the irq_bucket. */
118struct irq_bucket *irq_map[SUN4D_MAX_IRQ];
119/* Protect access to irq_map */
120static DEFINE_SPINLOCK(irq_map_lock);
121
122/* Allocate a new irq from the irq_table */
123unsigned int irq_alloc(unsigned int real_irq, unsigned int pil)
124{
125 unsigned long flags;
126 unsigned int i;
127
128 spin_lock_irqsave(&irq_table_lock, flags);
129 for (i = 1; i < NR_IRQS; i++) {
130 if (irq_table[i].real_irq == real_irq && irq_table[i].pil == pil)
131 goto found;
132 }
133
134 for (i = 1; i < NR_IRQS; i++) {
135 if (!irq_table[i].irq)
136 break;
137 }
138
139 if (i < NR_IRQS) {
140 irq_table[i].real_irq = real_irq;
141 irq_table[i].irq = i;
142 irq_table[i].pil = pil;
143 } else {
144 printk(KERN_ERR "IRQ: Out of virtual IRQs.\n");
145 i = 0;
146 }
147found:
148 spin_unlock_irqrestore(&irq_table_lock, flags);
149
150 return i;
151}
152
153/* Based on a single pil handler_irq may need to call several
154 * interrupt handlers. Use irq_map as entry to irq_table,
155 * and let each entry in irq_table point to the next entry.
156 */
157void irq_link(unsigned int irq)
158{
159 struct irq_bucket *p;
160 unsigned long flags;
161 unsigned int pil;
162
163 BUG_ON(irq >= NR_IRQS);
164
165 spin_lock_irqsave(&irq_map_lock, flags);
166
167 p = &irq_table[irq];
168 pil = p->pil;
169 BUG_ON(pil >= SUN4D_MAX_IRQ);
170 p->next = irq_map[pil];
171 irq_map[pil] = p;
172
173 spin_unlock_irqrestore(&irq_map_lock, flags);
174}
175
176void irq_unlink(unsigned int irq)
177{
178 struct irq_bucket *p, **pnext;
179 unsigned long flags;
180
181 BUG_ON(irq >= NR_IRQS);
182
183 spin_lock_irqsave(&irq_map_lock, flags);
184
185 p = &irq_table[irq];
186 BUG_ON(p->pil >= SUN4D_MAX_IRQ);
187 pnext = &irq_map[p->pil];
188 while (*pnext != p)
189 pnext = &(*pnext)->next;
190 *pnext = p->next;
191
192 spin_unlock_irqrestore(&irq_map_lock, flags);
193}
194
195
196/* /proc/interrupts printing */
197int arch_show_interrupts(struct seq_file *p, int prec)
198{
199 int j;
200
201#ifdef CONFIG_SMP
202 seq_printf(p, "RES: ");
203 for_each_online_cpu(j)
204 seq_printf(p, "%10u ", cpu_data(j).irq_resched_count);
205 seq_printf(p, " IPI rescheduling interrupts\n");
206 seq_printf(p, "CAL: ");
207 for_each_online_cpu(j)
208 seq_printf(p, "%10u ", cpu_data(j).irq_call_count);
209 seq_printf(p, " IPI function call interrupts\n");
210#endif
211 seq_printf(p, "NMI: ");
212 for_each_online_cpu(j)
213 seq_printf(p, "%10u ", cpu_data(j).counter);
214 seq_printf(p, " Non-maskable interrupts\n");
215 return 0;
216}
217
218void handler_irq(unsigned int pil, struct pt_regs *regs)
219{
220 struct pt_regs *old_regs;
221 struct irq_bucket *p;
222
223 BUG_ON(pil > 15);
224 old_regs = set_irq_regs(regs);
225 irq_enter();
226
227 p = irq_map[pil];
228 while (p) {
229 struct irq_bucket *next = p->next;
230
231 generic_handle_irq(p->irq);
232 p = next;
233 }
234 irq_exit();
235 set_irq_regs(old_regs);
236}
237
238#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
239static unsigned int floppy_irq;
240
241int sparc_floppy_request_irq(unsigned int irq, irq_handler_t irq_handler)
242{
243 unsigned int cpu_irq;
244 int err;
245
246
247 err = request_irq(irq, irq_handler, 0, "floppy", NULL);
248 if (err)
249 return -1;
250
251 /* Save for later use in floppy interrupt handler */
252 floppy_irq = irq;
253
254 cpu_irq = (irq & (NR_IRQS - 1));
255
256 /* Dork with trap table if we get this far. */
257#define INSTANTIATE(table) \
258 table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_one = SPARC_RD_PSR_L0; \
259 table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_two = \
260 SPARC_BRANCH((unsigned long) floppy_hardint, \
261 (unsigned long) &table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_two);\
262 table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_three = SPARC_RD_WIM_L3; \
263 table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_four = SPARC_NOP;
264
265 INSTANTIATE(sparc_ttable)
266
267#if defined CONFIG_SMP
268 if (sparc_cpu_model != sparc_leon) {
269 struct tt_entry *trap_table;
270
271 trap_table = &trapbase_cpu1;
272 INSTANTIATE(trap_table)
273 trap_table = &trapbase_cpu2;
274 INSTANTIATE(trap_table)
275 trap_table = &trapbase_cpu3;
276 INSTANTIATE(trap_table)
277 }
278#endif
279#undef INSTANTIATE
280 /*
281 * XXX Correct thing whould be to flush only I- and D-cache lines
282 * which contain the handler in question. But as of time of the
283 * writing we have no CPU-neutral interface to fine-grained flushes.
284 */
285 flush_cache_all();
286 return 0;
287}
288EXPORT_SYMBOL(sparc_floppy_request_irq);
289
290/*
291 * These variables are used to access state from the assembler
292 * interrupt handler, floppy_hardint, so we cannot put these in
293 * the floppy driver image because that would not work in the
294 * modular case.
295 */
296volatile unsigned char *fdc_status;
297EXPORT_SYMBOL(fdc_status);
298
299char *pdma_vaddr;
300EXPORT_SYMBOL(pdma_vaddr);
301
302unsigned long pdma_size;
303EXPORT_SYMBOL(pdma_size);
304
305volatile int doing_pdma;
306EXPORT_SYMBOL(doing_pdma);
307
308char *pdma_base;
309EXPORT_SYMBOL(pdma_base);
310
311unsigned long pdma_areasize;
312EXPORT_SYMBOL(pdma_areasize);
313
314/* Use the generic irq support to call floppy_interrupt
315 * which was setup using request_irq() in sparc_floppy_request_irq().
316 * We only have one floppy interrupt so we do not need to check
317 * for additional handlers being wired up by irq_link()
318 */
319void sparc_floppy_irq(int irq, void *dev_id, struct pt_regs *regs)
320{
321 struct pt_regs *old_regs;
322
323 old_regs = set_irq_regs(regs);
324 irq_enter();
325 generic_handle_irq(floppy_irq);
326 irq_exit();
327 set_irq_regs(old_regs);
328}
329#endif
330
331/* djhr
332 * This could probably be made indirect too and assigned in the CPU
333 * bits of the code. That would be much nicer I think and would also
334 * fit in with the idea of being able to tune your kernel for your machine
335 * by removing unrequired machine and device support.
336 *
337 */
338
339void __init init_IRQ(void)
340{
341 switch (sparc_cpu_model) {
342 case sun4m:
343 pcic_probe();
344 if (pcic_present())
345 sun4m_pci_init_IRQ();
346 else
347 sun4m_init_IRQ();
348 break;
349
350 case sun4d:
351 sun4d_init_IRQ();
352 break;
353
354 case sparc_leon:
355 leon_init_IRQ();
356 break;
357
358 default:
359 prom_printf("Cannot initialize IRQs on this Sun machine...");
360 break;
361 }
362}
363