Linux Audio

Check our new training course

Loading...
v3.5.6
 
  1/*
  2 * NOOP APIC driver.
  3 *
  4 * Does almost nothing and should be substituted by a real apic driver via
  5 * probe routine.
  6 *
  7 * Though in case if apic is disabled (for some reason) we try
  8 * to not uglify the caller's code and allow to call (some) apic routines
  9 * like self-ipi, etc...
 10 */
 11
 12#include <linux/threads.h>
 13#include <linux/cpumask.h>
 14#include <linux/module.h>
 15#include <linux/string.h>
 16#include <linux/kernel.h>
 17#include <linux/ctype.h>
 18#include <linux/init.h>
 19#include <linux/errno.h>
 20#include <asm/fixmap.h>
 21#include <asm/mpspec.h>
 22#include <asm/apicdef.h>
 23#include <asm/apic.h>
 24#include <asm/setup.h>
 25
 26#include <linux/smp.h>
 27#include <asm/ipi.h>
 28
 29#include <linux/interrupt.h>
 30#include <asm/acpi.h>
 31#include <asm/e820.h>
 32
 33static void noop_init_apic_ldr(void) { }
 
 34static void noop_send_IPI_mask(const struct cpumask *cpumask, int vector) { }
 35static void noop_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector) { }
 36static void noop_send_IPI_allbutself(int vector) { }
 37static void noop_send_IPI_all(int vector) { }
 38static void noop_send_IPI_self(int vector) { }
 39static void noop_apic_wait_icr_idle(void) { }
 40static void noop_apic_icr_write(u32 low, u32 id) { }
 41
 42static int noop_wakeup_secondary_cpu(int apicid, unsigned long start_eip)
 43{
 44	return -1;
 45}
 46
 47static u32 noop_safe_apic_wait_icr_idle(void)
 48{
 49	return 0;
 50}
 51
 52static u64 noop_apic_icr_read(void)
 53{
 54	return 0;
 55}
 56
 57static int noop_phys_pkg_id(int cpuid_apic, int index_msb)
 58{
 59	return 0;
 60}
 61
 62static unsigned int noop_get_apic_id(unsigned long x)
 63{
 64	return 0;
 65}
 66
 67static int noop_probe(void)
 68{
 69	/*
 70	 * NOOP apic should not ever be
 71	 * enabled via probe routine
 72	 */
 73	return 0;
 74}
 75
 76static int noop_apic_id_registered(void)
 77{
 78	/*
 79	 * if we would be really "pedantic"
 80	 * we should pass read_apic_id() here
 81	 * but since NOOP suppose APIC ID = 0
 82	 * lets save a few cycles
 83	 */
 84	return physid_isset(0, phys_cpu_present_map);
 85}
 86
 87static const struct cpumask *noop_target_cpus(void)
 88{
 89	/* only BSP here */
 90	return cpumask_of(0);
 91}
 92
 93static unsigned long noop_check_apicid_used(physid_mask_t *map, int apicid)
 94{
 95	return physid_isset(apicid, *map);
 96}
 97
 98static unsigned long noop_check_apicid_present(int bit)
 99{
100	return physid_isset(bit, phys_cpu_present_map);
101}
102
103static void noop_vector_allocation_domain(int cpu, struct cpumask *retmask)
104{
105	if (cpu != 0)
106		pr_warning("APIC: Vector allocated for non-BSP cpu\n");
107	cpumask_clear(retmask);
108	cpumask_set_cpu(cpu, retmask);
109}
110
111static u32 noop_apic_read(u32 reg)
112{
113	WARN_ON_ONCE((cpu_has_apic && !disable_apic));
114	return 0;
115}
116
117static void noop_apic_write(u32 reg, u32 v)
118{
119	WARN_ON_ONCE(cpu_has_apic && !disable_apic);
120}
121
122struct apic apic_noop = {
 
 
 
 
 
 
 
123	.name				= "noop",
124	.probe				= noop_probe,
125	.acpi_madt_oem_check		= NULL,
126
127	.apic_id_valid			= default_apic_id_valid,
128	.apic_id_registered		= noop_apic_id_registered,
129
130	.irq_delivery_mode		= dest_LowestPrio,
131	/* logical delivery broadcast to all CPUs: */
132	.irq_dest_mode			= 1,
133
134	.target_cpus			= noop_target_cpus,
135	.disable_esr			= 0,
136	.dest_logical			= APIC_DEST_LOGICAL,
137	.check_apicid_used		= noop_check_apicid_used,
138	.check_apicid_present		= noop_check_apicid_present,
139
140	.vector_allocation_domain	= noop_vector_allocation_domain,
141	.init_apic_ldr			= noop_init_apic_ldr,
142
143	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
144	.setup_apic_routing		= NULL,
145	.multi_timer_check		= NULL,
146
147	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
148	.apicid_to_cpu_present		= physid_set_mask_of_physid,
149
150	.setup_portio_remap		= NULL,
151	.check_phys_apicid_present	= default_check_phys_apicid_present,
152	.enable_apic_mode		= NULL,
153
154	.phys_pkg_id			= noop_phys_pkg_id,
155
156	.mps_oem_check			= NULL,
157
158	.get_apic_id			= noop_get_apic_id,
159	.set_apic_id			= NULL,
160	.apic_id_mask			= 0x0F << 24,
161
162	.cpu_mask_to_apicid		= default_cpu_mask_to_apicid,
163	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
164
 
165	.send_IPI_mask			= noop_send_IPI_mask,
166	.send_IPI_mask_allbutself	= noop_send_IPI_mask_allbutself,
167	.send_IPI_allbutself		= noop_send_IPI_allbutself,
168	.send_IPI_all			= noop_send_IPI_all,
169	.send_IPI_self			= noop_send_IPI_self,
170
171	.wakeup_secondary_cpu		= noop_wakeup_secondary_cpu,
172
173	/* should be safe */
174	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
175	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
176
177	.wait_for_init_deassert		= NULL,
178
179	.smp_callin_clear_local_apic	= NULL,
180	.inquire_remote_apic		= NULL,
181
182	.read				= noop_apic_read,
183	.write				= noop_apic_write,
184	.eoi_write			= noop_apic_write,
185	.icr_read			= noop_apic_icr_read,
186	.icr_write			= noop_apic_icr_write,
187	.wait_icr_idle			= noop_apic_wait_icr_idle,
188	.safe_wait_icr_idle		= noop_safe_apic_wait_icr_idle,
189
190#ifdef CONFIG_X86_32
191	.x86_32_early_logical_apicid	= noop_x86_32_early_logical_apicid,
192#endif
193};
v5.9
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * NOOP APIC driver.
  4 *
  5 * Does almost nothing and should be substituted by a real apic driver via
  6 * probe routine.
  7 *
  8 * Though in case if apic is disabled (for some reason) we try
  9 * to not uglify the caller's code and allow to call (some) apic routines
 10 * like self-ipi, etc...
 11 */
 
 
 12#include <linux/cpumask.h>
 13#include <linux/thread_info.h>
 
 
 
 
 
 
 
 
 
 
 
 
 
 14
 15#include <asm/apic.h>
 
 
 16
 17static void noop_init_apic_ldr(void) { }
 18static void noop_send_IPI(int cpu, int vector) { }
 19static void noop_send_IPI_mask(const struct cpumask *cpumask, int vector) { }
 20static void noop_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector) { }
 21static void noop_send_IPI_allbutself(int vector) { }
 22static void noop_send_IPI_all(int vector) { }
 23static void noop_send_IPI_self(int vector) { }
 24static void noop_apic_wait_icr_idle(void) { }
 25static void noop_apic_icr_write(u32 low, u32 id) { }
 26
 27static int noop_wakeup_secondary_cpu(int apicid, unsigned long start_eip)
 28{
 29	return -1;
 30}
 31
 32static u32 noop_safe_apic_wait_icr_idle(void)
 33{
 34	return 0;
 35}
 36
 37static u64 noop_apic_icr_read(void)
 38{
 39	return 0;
 40}
 41
 42static int noop_phys_pkg_id(int cpuid_apic, int index_msb)
 43{
 44	return 0;
 45}
 46
 47static unsigned int noop_get_apic_id(unsigned long x)
 48{
 49	return 0;
 50}
 51
 52static int noop_probe(void)
 53{
 54	/*
 55	 * NOOP apic should not ever be
 56	 * enabled via probe routine
 57	 */
 58	return 0;
 59}
 60
 61static int noop_apic_id_registered(void)
 62{
 63	/*
 64	 * if we would be really "pedantic"
 65	 * we should pass read_apic_id() here
 66	 * but since NOOP suppose APIC ID = 0
 67	 * lets save a few cycles
 68	 */
 69	return physid_isset(0, phys_cpu_present_map);
 70}
 71
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 72static u32 noop_apic_read(u32 reg)
 73{
 74	WARN_ON_ONCE(boot_cpu_has(X86_FEATURE_APIC) && !disable_apic);
 75	return 0;
 76}
 77
 78static void noop_apic_write(u32 reg, u32 v)
 79{
 80	WARN_ON_ONCE(boot_cpu_has(X86_FEATURE_APIC) && !disable_apic);
 81}
 82
 83#ifdef CONFIG_X86_32
 84static int noop_x86_32_early_logical_apicid(int cpu)
 85{
 86	return BAD_APICID;
 87}
 88#endif
 89
 90struct apic apic_noop __ro_after_init = {
 91	.name				= "noop",
 92	.probe				= noop_probe,
 93	.acpi_madt_oem_check		= NULL,
 94
 95	.apic_id_valid			= default_apic_id_valid,
 96	.apic_id_registered		= noop_apic_id_registered,
 97
 98	.irq_delivery_mode		= dest_Fixed,
 99	/* logical delivery broadcast to all CPUs: */
100	.irq_dest_mode			= 1,
101
 
102	.disable_esr			= 0,
103	.dest_logical			= APIC_DEST_LOGICAL,
104	.check_apicid_used		= default_check_apicid_used,
 
105
 
106	.init_apic_ldr			= noop_init_apic_ldr,
107
108	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
109	.setup_apic_routing		= NULL,
 
110
111	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
112	.apicid_to_cpu_present		= physid_set_mask_of_physid,
113
 
114	.check_phys_apicid_present	= default_check_phys_apicid_present,
 
115
116	.phys_pkg_id			= noop_phys_pkg_id,
117
 
 
118	.get_apic_id			= noop_get_apic_id,
119	.set_apic_id			= NULL,
 
120
121	.calc_dest_apicid		= apic_flat_calc_apicid,
 
122
123	.send_IPI			= noop_send_IPI,
124	.send_IPI_mask			= noop_send_IPI_mask,
125	.send_IPI_mask_allbutself	= noop_send_IPI_mask_allbutself,
126	.send_IPI_allbutself		= noop_send_IPI_allbutself,
127	.send_IPI_all			= noop_send_IPI_all,
128	.send_IPI_self			= noop_send_IPI_self,
129
130	.wakeup_secondary_cpu		= noop_wakeup_secondary_cpu,
131
 
 
 
 
 
 
 
132	.inquire_remote_apic		= NULL,
133
134	.read				= noop_apic_read,
135	.write				= noop_apic_write,
136	.eoi_write			= noop_apic_write,
137	.icr_read			= noop_apic_icr_read,
138	.icr_write			= noop_apic_icr_write,
139	.wait_icr_idle			= noop_apic_wait_icr_idle,
140	.safe_wait_icr_idle		= noop_safe_apic_wait_icr_idle,
141
142#ifdef CONFIG_X86_32
143	.x86_32_early_logical_apicid	= noop_x86_32_early_logical_apicid,
144#endif
145};