Loading...
1/*
2 * OMAP hardware spinlock driver
3 *
4 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
5 *
6 * Contact: Simon Que <sque@ti.com>
7 * Hari Kanigeri <h-kanigeri2@ti.com>
8 * Ohad Ben-Cohen <ohad@wizery.com>
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * version 2 as published by the Free Software Foundation.
13 *
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
18 */
19
20#include <linux/kernel.h>
21#include <linux/module.h>
22#include <linux/device.h>
23#include <linux/delay.h>
24#include <linux/io.h>
25#include <linux/bitops.h>
26#include <linux/pm_runtime.h>
27#include <linux/slab.h>
28#include <linux/spinlock.h>
29#include <linux/hwspinlock.h>
30#include <linux/platform_device.h>
31
32#include "hwspinlock_internal.h"
33
34/* Spinlock register offsets */
35#define SYSSTATUS_OFFSET 0x0014
36#define LOCK_BASE_OFFSET 0x0800
37
38#define SPINLOCK_NUMLOCKS_BIT_OFFSET (24)
39
40/* Possible values of SPINLOCK_LOCK_REG */
41#define SPINLOCK_NOTTAKEN (0) /* free */
42#define SPINLOCK_TAKEN (1) /* locked */
43
44static int omap_hwspinlock_trylock(struct hwspinlock *lock)
45{
46 void __iomem *lock_addr = lock->priv;
47
48 /* attempt to acquire the lock by reading its value */
49 return (SPINLOCK_NOTTAKEN == readl(lock_addr));
50}
51
52static void omap_hwspinlock_unlock(struct hwspinlock *lock)
53{
54 void __iomem *lock_addr = lock->priv;
55
56 /* release the lock by writing 0 to it */
57 writel(SPINLOCK_NOTTAKEN, lock_addr);
58}
59
60/*
61 * relax the OMAP interconnect while spinning on it.
62 *
63 * The specs recommended that the retry delay time will be
64 * just over half of the time that a requester would be
65 * expected to hold the lock.
66 *
67 * The number below is taken from an hardware specs example,
68 * obviously it is somewhat arbitrary.
69 */
70static void omap_hwspinlock_relax(struct hwspinlock *lock)
71{
72 ndelay(50);
73}
74
75static const struct hwspinlock_ops omap_hwspinlock_ops = {
76 .trylock = omap_hwspinlock_trylock,
77 .unlock = omap_hwspinlock_unlock,
78 .relax = omap_hwspinlock_relax,
79};
80
81static int __devinit omap_hwspinlock_probe(struct platform_device *pdev)
82{
83 struct hwspinlock_pdata *pdata = pdev->dev.platform_data;
84 struct hwspinlock_device *bank;
85 struct hwspinlock *hwlock;
86 struct resource *res;
87 void __iomem *io_base;
88 int num_locks, i, ret;
89
90 if (!pdata)
91 return -ENODEV;
92
93 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
94 if (!res)
95 return -ENODEV;
96
97 io_base = ioremap(res->start, resource_size(res));
98 if (!io_base)
99 return -ENOMEM;
100
101 /* Determine number of locks */
102 i = readl(io_base + SYSSTATUS_OFFSET);
103 i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET;
104
105 /* one of the four lsb's must be set, and nothing else */
106 if (hweight_long(i & 0xf) != 1 || i > 8) {
107 ret = -EINVAL;
108 goto iounmap_base;
109 }
110
111 num_locks = i * 32; /* actual number of locks in this device */
112
113 bank = kzalloc(sizeof(*bank) + num_locks * sizeof(*hwlock), GFP_KERNEL);
114 if (!bank) {
115 ret = -ENOMEM;
116 goto iounmap_base;
117 }
118
119 platform_set_drvdata(pdev, bank);
120
121 for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
122 hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
123
124 /*
125 * runtime PM will make sure the clock of this module is
126 * enabled iff at least one lock is requested
127 */
128 pm_runtime_enable(&pdev->dev);
129
130 ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
131 pdata->base_id, num_locks);
132 if (ret)
133 goto reg_fail;
134
135 return 0;
136
137reg_fail:
138 pm_runtime_disable(&pdev->dev);
139 kfree(bank);
140iounmap_base:
141 iounmap(io_base);
142 return ret;
143}
144
145static int __devexit omap_hwspinlock_remove(struct platform_device *pdev)
146{
147 struct hwspinlock_device *bank = platform_get_drvdata(pdev);
148 void __iomem *io_base = bank->lock[0].priv - LOCK_BASE_OFFSET;
149 int ret;
150
151 ret = hwspin_lock_unregister(bank);
152 if (ret) {
153 dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
154 return ret;
155 }
156
157 pm_runtime_disable(&pdev->dev);
158 iounmap(io_base);
159 kfree(bank);
160
161 return 0;
162}
163
164static struct platform_driver omap_hwspinlock_driver = {
165 .probe = omap_hwspinlock_probe,
166 .remove = __devexit_p(omap_hwspinlock_remove),
167 .driver = {
168 .name = "omap_hwspinlock",
169 .owner = THIS_MODULE,
170 },
171};
172
173static int __init omap_hwspinlock_init(void)
174{
175 return platform_driver_register(&omap_hwspinlock_driver);
176}
177/* board init code might need to reserve hwspinlocks for predefined purposes */
178postcore_initcall(omap_hwspinlock_init);
179
180static void __exit omap_hwspinlock_exit(void)
181{
182 platform_driver_unregister(&omap_hwspinlock_driver);
183}
184module_exit(omap_hwspinlock_exit);
185
186MODULE_LICENSE("GPL v2");
187MODULE_DESCRIPTION("Hardware spinlock driver for OMAP");
188MODULE_AUTHOR("Simon Que <sque@ti.com>");
189MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>");
190MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * OMAP hardware spinlock driver
4 *
5 * Copyright (C) 2010-2015 Texas Instruments Incorporated - http://www.ti.com
6 *
7 * Contact: Simon Que <sque@ti.com>
8 * Hari Kanigeri <h-kanigeri2@ti.com>
9 * Ohad Ben-Cohen <ohad@wizery.com>
10 */
11
12#include <linux/kernel.h>
13#include <linux/module.h>
14#include <linux/device.h>
15#include <linux/delay.h>
16#include <linux/io.h>
17#include <linux/bitops.h>
18#include <linux/pm_runtime.h>
19#include <linux/slab.h>
20#include <linux/spinlock.h>
21#include <linux/hwspinlock.h>
22#include <linux/of.h>
23#include <linux/platform_device.h>
24
25#include "hwspinlock_internal.h"
26
27/* Spinlock register offsets */
28#define SYSSTATUS_OFFSET 0x0014
29#define LOCK_BASE_OFFSET 0x0800
30
31#define SPINLOCK_NUMLOCKS_BIT_OFFSET (24)
32
33/* Possible values of SPINLOCK_LOCK_REG */
34#define SPINLOCK_NOTTAKEN (0) /* free */
35#define SPINLOCK_TAKEN (1) /* locked */
36
37static int omap_hwspinlock_trylock(struct hwspinlock *lock)
38{
39 void __iomem *lock_addr = lock->priv;
40
41 /* attempt to acquire the lock by reading its value */
42 return (SPINLOCK_NOTTAKEN == readl(lock_addr));
43}
44
45static void omap_hwspinlock_unlock(struct hwspinlock *lock)
46{
47 void __iomem *lock_addr = lock->priv;
48
49 /* release the lock by writing 0 to it */
50 writel(SPINLOCK_NOTTAKEN, lock_addr);
51}
52
53/*
54 * relax the OMAP interconnect while spinning on it.
55 *
56 * The specs recommended that the retry delay time will be
57 * just over half of the time that a requester would be
58 * expected to hold the lock.
59 *
60 * The number below is taken from an hardware specs example,
61 * obviously it is somewhat arbitrary.
62 */
63static void omap_hwspinlock_relax(struct hwspinlock *lock)
64{
65 ndelay(50);
66}
67
68static const struct hwspinlock_ops omap_hwspinlock_ops = {
69 .trylock = omap_hwspinlock_trylock,
70 .unlock = omap_hwspinlock_unlock,
71 .relax = omap_hwspinlock_relax,
72};
73
74static int omap_hwspinlock_probe(struct platform_device *pdev)
75{
76 struct device_node *node = pdev->dev.of_node;
77 struct hwspinlock_device *bank;
78 struct hwspinlock *hwlock;
79 struct resource *res;
80 void __iomem *io_base;
81 int num_locks, i, ret;
82 /* Only a single hwspinlock block device is supported */
83 int base_id = 0;
84
85 if (!node)
86 return -ENODEV;
87
88 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
89 if (!res)
90 return -ENODEV;
91
92 io_base = ioremap(res->start, resource_size(res));
93 if (!io_base)
94 return -ENOMEM;
95
96 /*
97 * make sure the module is enabled and clocked before reading
98 * the module SYSSTATUS register
99 */
100 pm_runtime_enable(&pdev->dev);
101 ret = pm_runtime_get_sync(&pdev->dev);
102 if (ret < 0) {
103 pm_runtime_put_noidle(&pdev->dev);
104 goto iounmap_base;
105 }
106
107 /* Determine number of locks */
108 i = readl(io_base + SYSSTATUS_OFFSET);
109 i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET;
110
111 /*
112 * runtime PM will make sure the clock of this module is
113 * enabled again iff at least one lock is requested
114 */
115 ret = pm_runtime_put(&pdev->dev);
116 if (ret < 0)
117 goto iounmap_base;
118
119 /* one of the four lsb's must be set, and nothing else */
120 if (hweight_long(i & 0xf) != 1 || i > 8) {
121 ret = -EINVAL;
122 goto iounmap_base;
123 }
124
125 num_locks = i * 32; /* actual number of locks in this device */
126
127 bank = kzalloc(struct_size(bank, lock, num_locks), GFP_KERNEL);
128 if (!bank) {
129 ret = -ENOMEM;
130 goto iounmap_base;
131 }
132
133 platform_set_drvdata(pdev, bank);
134
135 for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
136 hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
137
138 ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
139 base_id, num_locks);
140 if (ret)
141 goto reg_fail;
142
143 dev_dbg(&pdev->dev, "Registered %d locks with HwSpinlock core\n",
144 num_locks);
145
146 return 0;
147
148reg_fail:
149 kfree(bank);
150iounmap_base:
151 pm_runtime_disable(&pdev->dev);
152 iounmap(io_base);
153 return ret;
154}
155
156static int omap_hwspinlock_remove(struct platform_device *pdev)
157{
158 struct hwspinlock_device *bank = platform_get_drvdata(pdev);
159 void __iomem *io_base = bank->lock[0].priv - LOCK_BASE_OFFSET;
160 int ret;
161
162 ret = hwspin_lock_unregister(bank);
163 if (ret) {
164 dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
165 return ret;
166 }
167
168 pm_runtime_disable(&pdev->dev);
169 iounmap(io_base);
170 kfree(bank);
171
172 return 0;
173}
174
175static const struct of_device_id omap_hwspinlock_of_match[] = {
176 { .compatible = "ti,omap4-hwspinlock", },
177 { .compatible = "ti,am654-hwspinlock", },
178 { /* end */ },
179};
180MODULE_DEVICE_TABLE(of, omap_hwspinlock_of_match);
181
182static struct platform_driver omap_hwspinlock_driver = {
183 .probe = omap_hwspinlock_probe,
184 .remove = omap_hwspinlock_remove,
185 .driver = {
186 .name = "omap_hwspinlock",
187 .of_match_table = of_match_ptr(omap_hwspinlock_of_match),
188 },
189};
190
191static int __init omap_hwspinlock_init(void)
192{
193 return platform_driver_register(&omap_hwspinlock_driver);
194}
195/* board init code might need to reserve hwspinlocks for predefined purposes */
196postcore_initcall(omap_hwspinlock_init);
197
198static void __exit omap_hwspinlock_exit(void)
199{
200 platform_driver_unregister(&omap_hwspinlock_driver);
201}
202module_exit(omap_hwspinlock_exit);
203
204MODULE_LICENSE("GPL v2");
205MODULE_DESCRIPTION("Hardware spinlock driver for OMAP");
206MODULE_AUTHOR("Simon Que <sque@ti.com>");
207MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>");
208MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>");