Loading...
1
2#include <linux/module.h>
3
4#include <linux/platform_device.h>
5#include <linux/err.h>
6#include <linux/leds.h>
7
8#include <linux/io.h>
9#include <linux/dmi.h>
10
11#include <linux/i8042.h>
12
13#define CLEVO_MAIL_LED_OFF 0x0084
14#define CLEVO_MAIL_LED_BLINK_1HZ 0x008A
15#define CLEVO_MAIL_LED_BLINK_0_5HZ 0x0083
16
17MODULE_AUTHOR("Márton Németh <nm127@freemail.hu>");
18MODULE_DESCRIPTION("Clevo mail LED driver");
19MODULE_LICENSE("GPL");
20
21static bool __initdata nodetect;
22module_param_named(nodetect, nodetect, bool, 0);
23MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection");
24
25static struct platform_device *pdev;
26
27static int __init clevo_mail_led_dmi_callback(const struct dmi_system_id *id)
28{
29 printk(KERN_INFO KBUILD_MODNAME ": '%s' found\n", id->ident);
30 return 1;
31}
32
33/*
34 * struct mail_led_whitelist - List of known good models
35 *
36 * Contains the known good models this driver is compatible with.
37 * When adding a new model try to be as strict as possible. This
38 * makes it possible to keep the false positives (the model is
39 * detected as working, but in reality it is not) as low as
40 * possible.
41 */
42static struct dmi_system_id __initdata mail_led_whitelist[] = {
43 {
44 .callback = clevo_mail_led_dmi_callback,
45 .ident = "Clevo D410J",
46 .matches = {
47 DMI_MATCH(DMI_SYS_VENDOR, "VIA"),
48 DMI_MATCH(DMI_PRODUCT_NAME, "K8N800"),
49 DMI_MATCH(DMI_PRODUCT_VERSION, "VT8204B")
50 }
51 },
52 {
53 .callback = clevo_mail_led_dmi_callback,
54 .ident = "Clevo M5x0N",
55 .matches = {
56 DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
57 DMI_MATCH(DMI_PRODUCT_NAME, "M5x0N")
58 }
59 },
60 {
61 .callback = clevo_mail_led_dmi_callback,
62 .ident = "Positivo Mobile",
63 .matches = {
64 DMI_MATCH(DMI_BOARD_VENDOR, "CLEVO Co. "),
65 DMI_MATCH(DMI_BOARD_NAME, "M5X0V "),
66 DMI_MATCH(DMI_PRODUCT_NAME, "Positivo Mobile"),
67 DMI_MATCH(DMI_PRODUCT_VERSION, "VT6198")
68 }
69 },
70 {
71 .callback = clevo_mail_led_dmi_callback,
72 .ident = "Clevo D400P",
73 .matches = {
74 DMI_MATCH(DMI_BOARD_VENDOR, "Clevo"),
75 DMI_MATCH(DMI_BOARD_NAME, "D400P"),
76 DMI_MATCH(DMI_BOARD_VERSION, "Rev.A"),
77 DMI_MATCH(DMI_PRODUCT_VERSION, "0106")
78 }
79 },
80 {
81 .callback = clevo_mail_led_dmi_callback,
82 .ident = "Clevo D410V",
83 .matches = {
84 DMI_MATCH(DMI_BOARD_VENDOR, "Clevo, Co."),
85 DMI_MATCH(DMI_BOARD_NAME, "D400V/D470V"),
86 DMI_MATCH(DMI_BOARD_VERSION, "SS78B"),
87 DMI_MATCH(DMI_PRODUCT_VERSION, "Rev. A1")
88 }
89 },
90 { }
91};
92
93static void clevo_mail_led_set(struct led_classdev *led_cdev,
94 enum led_brightness value)
95{
96 i8042_lock_chip();
97
98 if (value == LED_OFF)
99 i8042_command(NULL, CLEVO_MAIL_LED_OFF);
100 else if (value <= LED_HALF)
101 i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
102 else
103 i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ);
104
105 i8042_unlock_chip();
106
107}
108
109static int clevo_mail_led_blink(struct led_classdev *led_cdev,
110 unsigned long *delay_on,
111 unsigned long *delay_off)
112{
113 int status = -EINVAL;
114
115 i8042_lock_chip();
116
117 if (*delay_on == 0 /* ms */ && *delay_off == 0 /* ms */) {
118 /* Special case: the leds subsystem requested us to
119 * chose one user friendly blinking of the LED, and
120 * start it. Let's blink the led slowly (0.5Hz).
121 */
122 *delay_on = 1000; /* ms */
123 *delay_off = 1000; /* ms */
124 i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
125 status = 0;
126
127 } else if (*delay_on == 500 /* ms */ && *delay_off == 500 /* ms */) {
128 /* blink the led with 1Hz */
129 i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ);
130 status = 0;
131
132 } else if (*delay_on == 1000 /* ms */ && *delay_off == 1000 /* ms */) {
133 /* blink the led with 0.5Hz */
134 i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
135 status = 0;
136
137 } else {
138 printk(KERN_DEBUG KBUILD_MODNAME
139 ": clevo_mail_led_blink(..., %lu, %lu),"
140 " returning -EINVAL (unsupported)\n",
141 *delay_on, *delay_off);
142 }
143
144 i8042_unlock_chip();
145
146 return status;
147}
148
149static struct led_classdev clevo_mail_led = {
150 .name = "clevo::mail",
151 .brightness_set = clevo_mail_led_set,
152 .blink_set = clevo_mail_led_blink,
153 .flags = LED_CORE_SUSPENDRESUME,
154};
155
156static int __devinit clevo_mail_led_probe(struct platform_device *pdev)
157{
158 return led_classdev_register(&pdev->dev, &clevo_mail_led);
159}
160
161static int clevo_mail_led_remove(struct platform_device *pdev)
162{
163 led_classdev_unregister(&clevo_mail_led);
164 return 0;
165}
166
167static struct platform_driver clevo_mail_led_driver = {
168 .probe = clevo_mail_led_probe,
169 .remove = clevo_mail_led_remove,
170 .driver = {
171 .name = KBUILD_MODNAME,
172 .owner = THIS_MODULE,
173 },
174};
175
176static int __init clevo_mail_led_init(void)
177{
178 int error = 0;
179 int count = 0;
180
181 /* Check with the help of DMI if we are running on supported hardware */
182 if (!nodetect) {
183 count = dmi_check_system(mail_led_whitelist);
184 } else {
185 count = 1;
186 printk(KERN_ERR KBUILD_MODNAME ": Skipping DMI detection. "
187 "If the driver works on your hardware please "
188 "report model and the output of dmidecode in tracker "
189 "at http://sourceforge.net/projects/clevo-mailled/\n");
190 }
191
192 if (!count)
193 return -ENODEV;
194
195 pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
196 if (!IS_ERR(pdev)) {
197 error = platform_driver_probe(&clevo_mail_led_driver,
198 clevo_mail_led_probe);
199 if (error) {
200 printk(KERN_ERR KBUILD_MODNAME
201 ": Can't probe platform driver\n");
202 platform_device_unregister(pdev);
203 }
204 } else
205 error = PTR_ERR(pdev);
206
207 return error;
208}
209
210static void __exit clevo_mail_led_exit(void)
211{
212 platform_device_unregister(pdev);
213 platform_driver_unregister(&clevo_mail_led_driver);
214
215 clevo_mail_led_set(NULL, LED_OFF);
216}
217
218module_init(clevo_mail_led_init);
219module_exit(clevo_mail_led_exit);
1// SPDX-License-Identifier: GPL-2.0-only
2#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
3
4#include <linux/module.h>
5
6#include <linux/platform_device.h>
7#include <linux/err.h>
8#include <linux/leds.h>
9
10#include <linux/io.h>
11#include <linux/dmi.h>
12
13#include <linux/i8042.h>
14
15#define CLEVO_MAIL_LED_OFF 0x0084
16#define CLEVO_MAIL_LED_BLINK_1HZ 0x008A
17#define CLEVO_MAIL_LED_BLINK_0_5HZ 0x0083
18
19MODULE_AUTHOR("Márton Németh <nm127@freemail.hu>");
20MODULE_DESCRIPTION("Clevo mail LED driver");
21MODULE_LICENSE("GPL");
22
23static bool nodetect;
24module_param_named(nodetect, nodetect, bool, 0);
25MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection");
26
27static struct platform_device *pdev;
28
29static int __init clevo_mail_led_dmi_callback(const struct dmi_system_id *id)
30{
31 pr_info("'%s' found\n", id->ident);
32 return 1;
33}
34
35/*
36 * struct clevo_mail_led_dmi_table - List of known good models
37 *
38 * Contains the known good models this driver is compatible with.
39 * When adding a new model try to be as strict as possible. This
40 * makes it possible to keep the false positives (the model is
41 * detected as working, but in reality it is not) as low as
42 * possible.
43 */
44static const struct dmi_system_id clevo_mail_led_dmi_table[] __initconst = {
45 {
46 .callback = clevo_mail_led_dmi_callback,
47 .ident = "Clevo D410J",
48 .matches = {
49 DMI_MATCH(DMI_SYS_VENDOR, "VIA"),
50 DMI_MATCH(DMI_PRODUCT_NAME, "K8N800"),
51 DMI_MATCH(DMI_PRODUCT_VERSION, "VT8204B")
52 }
53 },
54 {
55 .callback = clevo_mail_led_dmi_callback,
56 .ident = "Clevo M5x0N",
57 .matches = {
58 DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
59 DMI_MATCH(DMI_PRODUCT_NAME, "M5x0N")
60 }
61 },
62 {
63 .callback = clevo_mail_led_dmi_callback,
64 .ident = "Clevo M5x0V",
65 .matches = {
66 DMI_MATCH(DMI_BOARD_VENDOR, "CLEVO Co. "),
67 DMI_MATCH(DMI_BOARD_NAME, "M5X0V "),
68 DMI_MATCH(DMI_PRODUCT_VERSION, "VT6198")
69 }
70 },
71 {
72 .callback = clevo_mail_led_dmi_callback,
73 .ident = "Clevo D400P",
74 .matches = {
75 DMI_MATCH(DMI_BOARD_VENDOR, "Clevo"),
76 DMI_MATCH(DMI_BOARD_NAME, "D400P"),
77 DMI_MATCH(DMI_BOARD_VERSION, "Rev.A"),
78 DMI_MATCH(DMI_PRODUCT_VERSION, "0106")
79 }
80 },
81 {
82 .callback = clevo_mail_led_dmi_callback,
83 .ident = "Clevo D410V",
84 .matches = {
85 DMI_MATCH(DMI_BOARD_VENDOR, "Clevo, Co."),
86 DMI_MATCH(DMI_BOARD_NAME, "D400V/D470V"),
87 DMI_MATCH(DMI_BOARD_VERSION, "SS78B"),
88 DMI_MATCH(DMI_PRODUCT_VERSION, "Rev. A1")
89 }
90 },
91 { }
92};
93MODULE_DEVICE_TABLE(dmi, clevo_mail_led_dmi_table);
94
95static void clevo_mail_led_set(struct led_classdev *led_cdev,
96 enum led_brightness value)
97{
98 i8042_lock_chip();
99
100 if (value == LED_OFF)
101 i8042_command(NULL, CLEVO_MAIL_LED_OFF);
102 else if (value <= LED_HALF)
103 i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
104 else
105 i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ);
106
107 i8042_unlock_chip();
108
109}
110
111static int clevo_mail_led_blink(struct led_classdev *led_cdev,
112 unsigned long *delay_on,
113 unsigned long *delay_off)
114{
115 int status = -EINVAL;
116
117 i8042_lock_chip();
118
119 if (*delay_on == 0 /* ms */ && *delay_off == 0 /* ms */) {
120 /* Special case: the leds subsystem requested us to
121 * chose one user friendly blinking of the LED, and
122 * start it. Let's blink the led slowly (0.5Hz).
123 */
124 *delay_on = 1000; /* ms */
125 *delay_off = 1000; /* ms */
126 i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
127 status = 0;
128
129 } else if (*delay_on == 500 /* ms */ && *delay_off == 500 /* ms */) {
130 /* blink the led with 1Hz */
131 i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ);
132 status = 0;
133
134 } else if (*delay_on == 1000 /* ms */ && *delay_off == 1000 /* ms */) {
135 /* blink the led with 0.5Hz */
136 i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
137 status = 0;
138
139 } else {
140 pr_debug("clevo_mail_led_blink(..., %lu, %lu),"
141 " returning -EINVAL (unsupported)\n",
142 *delay_on, *delay_off);
143 }
144
145 i8042_unlock_chip();
146
147 return status;
148}
149
150static struct led_classdev clevo_mail_led = {
151 .name = "clevo::mail",
152 .brightness_set = clevo_mail_led_set,
153 .blink_set = clevo_mail_led_blink,
154 .flags = LED_CORE_SUSPENDRESUME,
155};
156
157static int __init clevo_mail_led_probe(struct platform_device *pdev)
158{
159 return led_classdev_register(&pdev->dev, &clevo_mail_led);
160}
161
162static int clevo_mail_led_remove(struct platform_device *pdev)
163{
164 led_classdev_unregister(&clevo_mail_led);
165 return 0;
166}
167
168static struct platform_driver clevo_mail_led_driver = {
169 .remove = clevo_mail_led_remove,
170 .driver = {
171 .name = KBUILD_MODNAME,
172 },
173};
174
175static int __init clevo_mail_led_init(void)
176{
177 int error = 0;
178 int count = 0;
179
180 /* Check with the help of DMI if we are running on supported hardware */
181 if (!nodetect) {
182 count = dmi_check_system(clevo_mail_led_dmi_table);
183 } else {
184 count = 1;
185 pr_err("Skipping DMI detection. "
186 "If the driver works on your hardware please "
187 "report model and the output of dmidecode in tracker "
188 "at http://sourceforge.net/projects/clevo-mailled/\n");
189 }
190
191 if (!count)
192 return -ENODEV;
193
194 pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
195 if (!IS_ERR(pdev)) {
196 error = platform_driver_probe(&clevo_mail_led_driver,
197 clevo_mail_led_probe);
198 if (error) {
199 pr_err("Can't probe platform driver\n");
200 platform_device_unregister(pdev);
201 }
202 } else
203 error = PTR_ERR(pdev);
204
205 return error;
206}
207
208static void __exit clevo_mail_led_exit(void)
209{
210 platform_device_unregister(pdev);
211 platform_driver_unregister(&clevo_mail_led_driver);
212
213 clevo_mail_led_set(NULL, LED_OFF);
214}
215
216module_init(clevo_mail_led_init);
217module_exit(clevo_mail_led_exit);