Loading...
1/*
2 * linux/arch/x86_64/kernel/head.S -- start in 32bit and switch to 64bit
3 *
4 * Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
5 * Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
6 * Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
7 * Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
8 * Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com>
9 */
10
11
12#include <linux/linkage.h>
13#include <linux/threads.h>
14#include <linux/init.h>
15#include <asm/segment.h>
16#include <asm/pgtable.h>
17#include <asm/page.h>
18#include <asm/msr.h>
19#include <asm/cache.h>
20#include <asm/processor-flags.h>
21#include <asm/percpu.h>
22#include <asm/nops.h>
23
24#ifdef CONFIG_PARAVIRT
25#include <asm/asm-offsets.h>
26#include <asm/paravirt.h>
27#define GET_CR2_INTO(reg) GET_CR2_INTO_RAX ; movq %rax, reg
28#else
29#define GET_CR2_INTO(reg) movq %cr2, reg
30#define INTERRUPT_RETURN iretq
31#endif
32
33/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
34 * because we need identity-mapped pages.
35 *
36 */
37
38#define pud_index(x) (((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
39
40L4_PAGE_OFFSET = pgd_index(__PAGE_OFFSET)
41L3_PAGE_OFFSET = pud_index(__PAGE_OFFSET)
42L4_START_KERNEL = pgd_index(__START_KERNEL_map)
43L3_START_KERNEL = pud_index(__START_KERNEL_map)
44
45 .text
46 __HEAD
47 .code64
48 .globl startup_64
49startup_64:
50
51 /*
52 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
53 * and someone has loaded an identity mapped page table
54 * for us. These identity mapped page tables map all of the
55 * kernel pages and possibly all of memory.
56 *
57 * %esi holds a physical pointer to real_mode_data.
58 *
59 * We come here either directly from a 64bit bootloader, or from
60 * arch/x86_64/boot/compressed/head.S.
61 *
62 * We only come here initially at boot nothing else comes here.
63 *
64 * Since we may be loaded at an address different from what we were
65 * compiled to run at we first fixup the physical addresses in our page
66 * tables and then reload them.
67 */
68
69 /* Compute the delta between the address I am compiled to run at and the
70 * address I am actually running at.
71 */
72 leaq _text(%rip), %rbp
73 subq $_text - __START_KERNEL_map, %rbp
74
75 /* Is the address not 2M aligned? */
76 movq %rbp, %rax
77 andl $~PMD_PAGE_MASK, %eax
78 testl %eax, %eax
79 jnz bad_address
80
81 /* Is the address too large? */
82 leaq _text(%rip), %rdx
83 movq $PGDIR_SIZE, %rax
84 cmpq %rax, %rdx
85 jae bad_address
86
87 /* Fixup the physical addresses in the page table
88 */
89 addq %rbp, init_level4_pgt + 0(%rip)
90 addq %rbp, init_level4_pgt + (L4_PAGE_OFFSET*8)(%rip)
91 addq %rbp, init_level4_pgt + (L4_START_KERNEL*8)(%rip)
92
93 addq %rbp, level3_ident_pgt + 0(%rip)
94
95 addq %rbp, level3_kernel_pgt + (510*8)(%rip)
96 addq %rbp, level3_kernel_pgt + (511*8)(%rip)
97
98 addq %rbp, level2_fixmap_pgt + (506*8)(%rip)
99
100 /* Add an Identity mapping if I am above 1G */
101 leaq _text(%rip), %rdi
102 andq $PMD_PAGE_MASK, %rdi
103
104 movq %rdi, %rax
105 shrq $PUD_SHIFT, %rax
106 andq $(PTRS_PER_PUD - 1), %rax
107 jz ident_complete
108
109 leaq (level2_spare_pgt - __START_KERNEL_map + _KERNPG_TABLE)(%rbp), %rdx
110 leaq level3_ident_pgt(%rip), %rbx
111 movq %rdx, 0(%rbx, %rax, 8)
112
113 movq %rdi, %rax
114 shrq $PMD_SHIFT, %rax
115 andq $(PTRS_PER_PMD - 1), %rax
116 leaq __PAGE_KERNEL_IDENT_LARGE_EXEC(%rdi), %rdx
117 leaq level2_spare_pgt(%rip), %rbx
118 movq %rdx, 0(%rbx, %rax, 8)
119ident_complete:
120
121 /*
122 * Fixup the kernel text+data virtual addresses. Note that
123 * we might write invalid pmds, when the kernel is relocated
124 * cleanup_highmap() fixes this up along with the mappings
125 * beyond _end.
126 */
127
128 leaq level2_kernel_pgt(%rip), %rdi
129 leaq 4096(%rdi), %r8
130 /* See if it is a valid page table entry */
1311: testq $1, 0(%rdi)
132 jz 2f
133 addq %rbp, 0(%rdi)
134 /* Go to the next page */
1352: addq $8, %rdi
136 cmp %r8, %rdi
137 jne 1b
138
139 /* Fixup phys_base */
140 addq %rbp, phys_base(%rip)
141
142 /* Due to ENTRY(), sometimes the empty space gets filled with
143 * zeros. Better take a jmp than relying on empty space being
144 * filled with 0x90 (nop)
145 */
146 jmp secondary_startup_64
147ENTRY(secondary_startup_64)
148 /*
149 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
150 * and someone has loaded a mapped page table.
151 *
152 * %esi holds a physical pointer to real_mode_data.
153 *
154 * We come here either from startup_64 (using physical addresses)
155 * or from trampoline.S (using virtual addresses).
156 *
157 * Using virtual addresses from trampoline.S removes the need
158 * to have any identity mapped pages in the kernel page table
159 * after the boot processor executes this code.
160 */
161
162 /* Enable PAE mode and PGE */
163 movl $(X86_CR4_PAE | X86_CR4_PGE), %eax
164 movq %rax, %cr4
165
166 /* Setup early boot stage 4 level pagetables. */
167 movq $(init_level4_pgt - __START_KERNEL_map), %rax
168 addq phys_base(%rip), %rax
169 movq %rax, %cr3
170
171 /* Ensure I am executing from virtual addresses */
172 movq $1f, %rax
173 jmp *%rax
1741:
175
176 /* Check if nx is implemented */
177 movl $0x80000001, %eax
178 cpuid
179 movl %edx,%edi
180
181 /* Setup EFER (Extended Feature Enable Register) */
182 movl $MSR_EFER, %ecx
183 rdmsr
184 btsl $_EFER_SCE, %eax /* Enable System Call */
185 btl $20,%edi /* No Execute supported? */
186 jnc 1f
187 btsl $_EFER_NX, %eax
1881: wrmsr /* Make changes effective */
189
190 /* Setup cr0 */
191#define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \
192 X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \
193 X86_CR0_PG)
194 movl $CR0_STATE, %eax
195 /* Make changes effective */
196 movq %rax, %cr0
197
198 /* Setup a boot time stack */
199 movq stack_start(%rip),%rsp
200
201 /* zero EFLAGS after setting rsp */
202 pushq $0
203 popfq
204
205 /*
206 * We must switch to a new descriptor in kernel space for the GDT
207 * because soon the kernel won't have access anymore to the userspace
208 * addresses where we're currently running on. We have to do that here
209 * because in 32bit we couldn't load a 64bit linear address.
210 */
211 lgdt early_gdt_descr(%rip)
212
213 /* set up data segments */
214 xorl %eax,%eax
215 movl %eax,%ds
216 movl %eax,%ss
217 movl %eax,%es
218
219 /*
220 * We don't really need to load %fs or %gs, but load them anyway
221 * to kill any stale realmode selectors. This allows execution
222 * under VT hardware.
223 */
224 movl %eax,%fs
225 movl %eax,%gs
226
227 /* Set up %gs.
228 *
229 * The base of %gs always points to the bottom of the irqstack
230 * union. If the stack protector canary is enabled, it is
231 * located at %gs:40. Note that, on SMP, the boot cpu uses
232 * init data section till per cpu areas are set up.
233 */
234 movl $MSR_GS_BASE,%ecx
235 movl initial_gs(%rip),%eax
236 movl initial_gs+4(%rip),%edx
237 wrmsr
238
239 /* esi is pointer to real mode structure with interesting info.
240 pass it to C */
241 movl %esi, %edi
242
243 /* Finally jump to run C code and to be on real kernel address
244 * Since we are running on identity-mapped space we have to jump
245 * to the full 64bit address, this is only possible as indirect
246 * jump. In addition we need to ensure %cs is set so we make this
247 * a far return.
248 */
249 movq initial_code(%rip),%rax
250 pushq $0 # fake return address to stop unwinder
251 pushq $__KERNEL_CS # set correct cs
252 pushq %rax # target address in negative space
253 lretq
254
255 /* SMP bootup changes these two */
256 __REFDATA
257 .align 8
258 ENTRY(initial_code)
259 .quad x86_64_start_kernel
260 ENTRY(initial_gs)
261 .quad INIT_PER_CPU_VAR(irq_stack_union)
262
263 ENTRY(stack_start)
264 .quad init_thread_union+THREAD_SIZE-8
265 .word 0
266 __FINITDATA
267
268bad_address:
269 jmp bad_address
270
271 .section ".init.text","ax"
272 .globl early_idt_handlers
273early_idt_handlers:
274 # 104(%rsp) %rflags
275 # 96(%rsp) %cs
276 # 88(%rsp) %rip
277 # 80(%rsp) error code
278 i = 0
279 .rept NUM_EXCEPTION_VECTORS
280 .if (EXCEPTION_ERRCODE_MASK >> i) & 1
281 ASM_NOP2
282 .else
283 pushq $0 # Dummy error code, to make stack frame uniform
284 .endif
285 pushq $i # 72(%rsp) Vector number
286 jmp early_idt_handler
287 i = i + 1
288 .endr
289
290ENTRY(early_idt_handler)
291 cld
292
293 cmpl $2,early_recursion_flag(%rip)
294 jz 1f
295 incl early_recursion_flag(%rip)
296
297 pushq %rax # 64(%rsp)
298 pushq %rcx # 56(%rsp)
299 pushq %rdx # 48(%rsp)
300 pushq %rsi # 40(%rsp)
301 pushq %rdi # 32(%rsp)
302 pushq %r8 # 24(%rsp)
303 pushq %r9 # 16(%rsp)
304 pushq %r10 # 8(%rsp)
305 pushq %r11 # 0(%rsp)
306
307 cmpl $__KERNEL_CS,96(%rsp)
308 jne 10f
309
310 leaq 88(%rsp),%rdi # Pointer to %rip
311 call early_fixup_exception
312 andl %eax,%eax
313 jnz 20f # Found an exception entry
314
31510:
316#ifdef CONFIG_EARLY_PRINTK
317 GET_CR2_INTO(%r9) # can clobber any volatile register if pv
318 movl 80(%rsp),%r8d # error code
319 movl 72(%rsp),%esi # vector number
320 movl 96(%rsp),%edx # %cs
321 movq 88(%rsp),%rcx # %rip
322 xorl %eax,%eax
323 leaq early_idt_msg(%rip),%rdi
324 call early_printk
325 cmpl $2,early_recursion_flag(%rip)
326 jz 1f
327 call dump_stack
328#ifdef CONFIG_KALLSYMS
329 leaq early_idt_ripmsg(%rip),%rdi
330 movq 40(%rsp),%rsi # %rip again
331 call __print_symbol
332#endif
333#endif /* EARLY_PRINTK */
3341: hlt
335 jmp 1b
336
33720: # Exception table entry found
338 popq %r11
339 popq %r10
340 popq %r9
341 popq %r8
342 popq %rdi
343 popq %rsi
344 popq %rdx
345 popq %rcx
346 popq %rax
347 addq $16,%rsp # drop vector number and error code
348 decl early_recursion_flag(%rip)
349 INTERRUPT_RETURN
350
351 .balign 4
352early_recursion_flag:
353 .long 0
354
355#ifdef CONFIG_EARLY_PRINTK
356early_idt_msg:
357 .asciz "PANIC: early exception %02lx rip %lx:%lx error %lx cr2 %lx\n"
358early_idt_ripmsg:
359 .asciz "RIP %s\n"
360#endif /* CONFIG_EARLY_PRINTK */
361 .previous
362
363#define NEXT_PAGE(name) \
364 .balign PAGE_SIZE; \
365ENTRY(name)
366
367/* Automate the creation of 1 to 1 mapping pmd entries */
368#define PMDS(START, PERM, COUNT) \
369 i = 0 ; \
370 .rept (COUNT) ; \
371 .quad (START) + (i << PMD_SHIFT) + (PERM) ; \
372 i = i + 1 ; \
373 .endr
374
375 .data
376 /*
377 * This default setting generates an ident mapping at address 0x100000
378 * and a mapping for the kernel that precisely maps virtual address
379 * 0xffffffff80000000 to physical address 0x000000. (always using
380 * 2Mbyte large pages provided by PAE mode)
381 */
382NEXT_PAGE(init_level4_pgt)
383 .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
384 .org init_level4_pgt + L4_PAGE_OFFSET*8, 0
385 .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
386 .org init_level4_pgt + L4_START_KERNEL*8, 0
387 /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
388 .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE
389
390NEXT_PAGE(level3_ident_pgt)
391 .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
392 .fill 511,8,0
393
394NEXT_PAGE(level3_kernel_pgt)
395 .fill L3_START_KERNEL,8,0
396 /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
397 .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
398 .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
399
400NEXT_PAGE(level2_fixmap_pgt)
401 .fill 506,8,0
402 .quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
403 /* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */
404 .fill 5,8,0
405
406NEXT_PAGE(level1_fixmap_pgt)
407 .fill 512,8,0
408
409NEXT_PAGE(level2_ident_pgt)
410 /* Since I easily can, map the first 1G.
411 * Don't set NX because code runs from these pages.
412 */
413 PMDS(0, __PAGE_KERNEL_IDENT_LARGE_EXEC, PTRS_PER_PMD)
414
415NEXT_PAGE(level2_kernel_pgt)
416 /*
417 * 512 MB kernel mapping. We spend a full page on this pagetable
418 * anyway.
419 *
420 * The kernel code+data+bss must not be bigger than that.
421 *
422 * (NOTE: at +512MB starts the module area, see MODULES_VADDR.
423 * If you want to increase this then increase MODULES_VADDR
424 * too.)
425 */
426 PMDS(0, __PAGE_KERNEL_LARGE_EXEC,
427 KERNEL_IMAGE_SIZE/PMD_SIZE)
428
429NEXT_PAGE(level2_spare_pgt)
430 .fill 512, 8, 0
431
432#undef PMDS
433#undef NEXT_PAGE
434
435 .data
436 .align 16
437 .globl early_gdt_descr
438early_gdt_descr:
439 .word GDT_ENTRIES*8-1
440early_gdt_descr_base:
441 .quad INIT_PER_CPU_VAR(gdt_page)
442
443ENTRY(phys_base)
444 /* This must match the first entry in level2_kernel_pgt */
445 .quad 0x0000000000000000
446
447#include "../../x86/xen/xen-head.S"
448
449 .section .bss, "aw", @nobits
450 .align L1_CACHE_BYTES
451ENTRY(idt_table)
452 .skip IDT_ENTRIES * 16
453
454 .align L1_CACHE_BYTES
455ENTRY(nmi_idt_table)
456 .skip IDT_ENTRIES * 16
457
458 __PAGE_ALIGNED_BSS
459 .align PAGE_SIZE
460ENTRY(empty_zero_page)
461 .skip PAGE_SIZE
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * linux/arch/x86/kernel/head_64.S -- start in 32bit and switch to 64bit
4 *
5 * Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
6 * Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
7 * Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
8 * Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
9 * Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com>
10 */
11
12
13#include <linux/linkage.h>
14#include <linux/threads.h>
15#include <linux/init.h>
16#include <linux/pgtable.h>
17#include <asm/segment.h>
18#include <asm/page.h>
19#include <asm/msr.h>
20#include <asm/cache.h>
21#include <asm/processor-flags.h>
22#include <asm/percpu.h>
23#include <asm/nops.h>
24#include "../entry/calling.h"
25#include <asm/export.h>
26#include <asm/nospec-branch.h>
27#include <asm/fixmap.h>
28
29/*
30 * We are not able to switch in one step to the final KERNEL ADDRESS SPACE
31 * because we need identity-mapped pages.
32 */
33#define l4_index(x) (((x) >> 39) & 511)
34#define pud_index(x) (((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
35
36L4_PAGE_OFFSET = l4_index(__PAGE_OFFSET_BASE_L4)
37L4_START_KERNEL = l4_index(__START_KERNEL_map)
38
39L3_START_KERNEL = pud_index(__START_KERNEL_map)
40
41 .text
42 __HEAD
43 .code64
44SYM_CODE_START_NOALIGN(startup_64)
45 UNWIND_HINT_EMPTY
46 /*
47 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
48 * and someone has loaded an identity mapped page table
49 * for us. These identity mapped page tables map all of the
50 * kernel pages and possibly all of memory.
51 *
52 * %rsi holds a physical pointer to real_mode_data.
53 *
54 * We come here either directly from a 64bit bootloader, or from
55 * arch/x86/boot/compressed/head_64.S.
56 *
57 * We only come here initially at boot nothing else comes here.
58 *
59 * Since we may be loaded at an address different from what we were
60 * compiled to run at we first fixup the physical addresses in our page
61 * tables and then reload them.
62 */
63
64 /* Set up the stack for verify_cpu(), similar to initial_stack below */
65 leaq (__end_init_task - FRAME_SIZE)(%rip), %rsp
66
67 leaq _text(%rip), %rdi
68 pushq %rsi
69 call startup_64_setup_env
70 popq %rsi
71
72 /* Now switch to __KERNEL_CS so IRET works reliably */
73 pushq $__KERNEL_CS
74 leaq .Lon_kernel_cs(%rip), %rax
75 pushq %rax
76 lretq
77
78.Lon_kernel_cs:
79 UNWIND_HINT_EMPTY
80
81 /* Sanitize CPU configuration */
82 call verify_cpu
83
84 /*
85 * Perform pagetable fixups. Additionally, if SME is active, encrypt
86 * the kernel and retrieve the modifier (SME encryption mask if SME
87 * is active) to be added to the initial pgdir entry that will be
88 * programmed into CR3.
89 */
90 leaq _text(%rip), %rdi
91 pushq %rsi
92 call __startup_64
93 popq %rsi
94
95 /* Form the CR3 value being sure to include the CR3 modifier */
96 addq $(early_top_pgt - __START_KERNEL_map), %rax
97 jmp 1f
98SYM_CODE_END(startup_64)
99
100SYM_CODE_START(secondary_startup_64)
101 UNWIND_HINT_EMPTY
102 /*
103 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
104 * and someone has loaded a mapped page table.
105 *
106 * %rsi holds a physical pointer to real_mode_data.
107 *
108 * We come here either from startup_64 (using physical addresses)
109 * or from trampoline.S (using virtual addresses).
110 *
111 * Using virtual addresses from trampoline.S removes the need
112 * to have any identity mapped pages in the kernel page table
113 * after the boot processor executes this code.
114 */
115
116 /* Sanitize CPU configuration */
117 call verify_cpu
118
119 /*
120 * The secondary_startup_64_no_verify entry point is only used by
121 * SEV-ES guests. In those guests the call to verify_cpu() would cause
122 * #VC exceptions which can not be handled at this stage of secondary
123 * CPU bringup.
124 *
125 * All non SEV-ES systems, especially Intel systems, need to execute
126 * verify_cpu() above to make sure NX is enabled.
127 */
128SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
129 UNWIND_HINT_EMPTY
130
131 /*
132 * Retrieve the modifier (SME encryption mask if SME is active) to be
133 * added to the initial pgdir entry that will be programmed into CR3.
134 */
135 pushq %rsi
136 call __startup_secondary_64
137 popq %rsi
138
139 /* Form the CR3 value being sure to include the CR3 modifier */
140 addq $(init_top_pgt - __START_KERNEL_map), %rax
1411:
142
143 /* Enable PAE mode, PGE and LA57 */
144 movl $(X86_CR4_PAE | X86_CR4_PGE), %ecx
145#ifdef CONFIG_X86_5LEVEL
146 testl $1, __pgtable_l5_enabled(%rip)
147 jz 1f
148 orl $X86_CR4_LA57, %ecx
1491:
150#endif
151 movq %rcx, %cr4
152
153 /* Setup early boot stage 4-/5-level pagetables. */
154 addq phys_base(%rip), %rax
155
156 /*
157 * For SEV guests: Verify that the C-bit is correct. A malicious
158 * hypervisor could lie about the C-bit position to perform a ROP
159 * attack on the guest by writing to the unencrypted stack and wait for
160 * the next RET instruction.
161 * %rsi carries pointer to realmode data and is callee-clobbered. Save
162 * and restore it.
163 */
164 pushq %rsi
165 movq %rax, %rdi
166 call sev_verify_cbit
167 popq %rsi
168
169 /* Switch to new page-table */
170 movq %rax, %cr3
171
172 /* Ensure I am executing from virtual addresses */
173 movq $1f, %rax
174 ANNOTATE_RETPOLINE_SAFE
175 jmp *%rax
1761:
177 UNWIND_HINT_EMPTY
178
179 /*
180 * We must switch to a new descriptor in kernel space for the GDT
181 * because soon the kernel won't have access anymore to the userspace
182 * addresses where we're currently running on. We have to do that here
183 * because in 32bit we couldn't load a 64bit linear address.
184 */
185 lgdt early_gdt_descr(%rip)
186
187 /* set up data segments */
188 xorl %eax,%eax
189 movl %eax,%ds
190 movl %eax,%ss
191 movl %eax,%es
192
193 /*
194 * We don't really need to load %fs or %gs, but load them anyway
195 * to kill any stale realmode selectors. This allows execution
196 * under VT hardware.
197 */
198 movl %eax,%fs
199 movl %eax,%gs
200
201 /* Set up %gs.
202 *
203 * The base of %gs always points to fixed_percpu_data. If the
204 * stack protector canary is enabled, it is located at %gs:40.
205 * Note that, on SMP, the boot cpu uses init data section until
206 * the per cpu areas are set up.
207 */
208 movl $MSR_GS_BASE,%ecx
209 movl initial_gs(%rip),%eax
210 movl initial_gs+4(%rip),%edx
211 wrmsr
212
213 /*
214 * Setup a boot time stack - Any secondary CPU will have lost its stack
215 * by now because the cr3-switch above unmaps the real-mode stack
216 */
217 movq initial_stack(%rip), %rsp
218
219 /* Setup and Load IDT */
220 pushq %rsi
221 call early_setup_idt
222 popq %rsi
223
224 /* Check if nx is implemented */
225 movl $0x80000001, %eax
226 cpuid
227 movl %edx,%edi
228
229 /* Setup EFER (Extended Feature Enable Register) */
230 movl $MSR_EFER, %ecx
231 rdmsr
232 btsl $_EFER_SCE, %eax /* Enable System Call */
233 btl $20,%edi /* No Execute supported? */
234 jnc 1f
235 btsl $_EFER_NX, %eax
236 btsq $_PAGE_BIT_NX,early_pmd_flags(%rip)
2371: wrmsr /* Make changes effective */
238
239 /* Setup cr0 */
240 movl $CR0_STATE, %eax
241 /* Make changes effective */
242 movq %rax, %cr0
243
244 /* zero EFLAGS after setting rsp */
245 pushq $0
246 popfq
247
248 /* rsi is pointer to real mode structure with interesting info.
249 pass it to C */
250 movq %rsi, %rdi
251
252.Ljump_to_C_code:
253 /*
254 * Jump to run C code and to be on a real kernel address.
255 * Since we are running on identity-mapped space we have to jump
256 * to the full 64bit address, this is only possible as indirect
257 * jump. In addition we need to ensure %cs is set so we make this
258 * a far return.
259 *
260 * Note: do not change to far jump indirect with 64bit offset.
261 *
262 * AMD does not support far jump indirect with 64bit offset.
263 * AMD64 Architecture Programmer's Manual, Volume 3: states only
264 * JMP FAR mem16:16 FF /5 Far jump indirect,
265 * with the target specified by a far pointer in memory.
266 * JMP FAR mem16:32 FF /5 Far jump indirect,
267 * with the target specified by a far pointer in memory.
268 *
269 * Intel64 does support 64bit offset.
270 * Software Developer Manual Vol 2: states:
271 * FF /5 JMP m16:16 Jump far, absolute indirect,
272 * address given in m16:16
273 * FF /5 JMP m16:32 Jump far, absolute indirect,
274 * address given in m16:32.
275 * REX.W + FF /5 JMP m16:64 Jump far, absolute indirect,
276 * address given in m16:64.
277 */
278 pushq $.Lafter_lret # put return address on stack for unwinder
279 xorl %ebp, %ebp # clear frame pointer
280 movq initial_code(%rip), %rax
281 pushq $__KERNEL_CS # set correct cs
282 pushq %rax # target address in negative space
283 lretq
284.Lafter_lret:
285SYM_CODE_END(secondary_startup_64)
286
287#include "verify_cpu.S"
288#include "sev_verify_cbit.S"
289
290#ifdef CONFIG_HOTPLUG_CPU
291/*
292 * Boot CPU0 entry point. It's called from play_dead(). Everything has been set
293 * up already except stack. We just set up stack here. Then call
294 * start_secondary() via .Ljump_to_C_code.
295 */
296SYM_CODE_START(start_cpu0)
297 UNWIND_HINT_EMPTY
298 movq initial_stack(%rip), %rsp
299 jmp .Ljump_to_C_code
300SYM_CODE_END(start_cpu0)
301#endif
302
303#ifdef CONFIG_AMD_MEM_ENCRYPT
304/*
305 * VC Exception handler used during early boot when running on kernel
306 * addresses, but before the switch to the idt_table can be made.
307 * The early_idt_handler_array can't be used here because it calls into a lot
308 * of __init code and this handler is also used during CPU offlining/onlining.
309 * Therefore this handler ends up in the .text section so that it stays around
310 * when .init.text is freed.
311 */
312SYM_CODE_START_NOALIGN(vc_boot_ghcb)
313 UNWIND_HINT_IRET_REGS offset=8
314
315 /* Build pt_regs */
316 PUSH_AND_CLEAR_REGS
317
318 /* Call C handler */
319 movq %rsp, %rdi
320 movq ORIG_RAX(%rsp), %rsi
321 movq initial_vc_handler(%rip), %rax
322 ANNOTATE_RETPOLINE_SAFE
323 call *%rax
324
325 /* Unwind pt_regs */
326 POP_REGS
327
328 /* Remove Error Code */
329 addq $8, %rsp
330
331 /* Pure iret required here - don't use INTERRUPT_RETURN */
332 iretq
333SYM_CODE_END(vc_boot_ghcb)
334#endif
335
336 /* Both SMP bootup and ACPI suspend change these variables */
337 __REFDATA
338 .balign 8
339SYM_DATA(initial_code, .quad x86_64_start_kernel)
340SYM_DATA(initial_gs, .quad INIT_PER_CPU_VAR(fixed_percpu_data))
341#ifdef CONFIG_AMD_MEM_ENCRYPT
342SYM_DATA(initial_vc_handler, .quad handle_vc_boot_ghcb)
343#endif
344
345/*
346 * The FRAME_SIZE gap is a convention which helps the in-kernel unwinder
347 * reliably detect the end of the stack.
348 */
349SYM_DATA(initial_stack, .quad init_thread_union + THREAD_SIZE - FRAME_SIZE)
350 __FINITDATA
351
352 __INIT
353SYM_CODE_START(early_idt_handler_array)
354 i = 0
355 .rept NUM_EXCEPTION_VECTORS
356 .if ((EXCEPTION_ERRCODE_MASK >> i) & 1) == 0
357 UNWIND_HINT_IRET_REGS
358 pushq $0 # Dummy error code, to make stack frame uniform
359 .else
360 UNWIND_HINT_IRET_REGS offset=8
361 .endif
362 pushq $i # 72(%rsp) Vector number
363 jmp early_idt_handler_common
364 UNWIND_HINT_IRET_REGS
365 i = i + 1
366 .fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
367 .endr
368 UNWIND_HINT_IRET_REGS offset=16
369SYM_CODE_END(early_idt_handler_array)
370
371SYM_CODE_START_LOCAL(early_idt_handler_common)
372 /*
373 * The stack is the hardware frame, an error code or zero, and the
374 * vector number.
375 */
376 cld
377
378 incl early_recursion_flag(%rip)
379
380 /* The vector number is currently in the pt_regs->di slot. */
381 pushq %rsi /* pt_regs->si */
382 movq 8(%rsp), %rsi /* RSI = vector number */
383 movq %rdi, 8(%rsp) /* pt_regs->di = RDI */
384 pushq %rdx /* pt_regs->dx */
385 pushq %rcx /* pt_regs->cx */
386 pushq %rax /* pt_regs->ax */
387 pushq %r8 /* pt_regs->r8 */
388 pushq %r9 /* pt_regs->r9 */
389 pushq %r10 /* pt_regs->r10 */
390 pushq %r11 /* pt_regs->r11 */
391 pushq %rbx /* pt_regs->bx */
392 pushq %rbp /* pt_regs->bp */
393 pushq %r12 /* pt_regs->r12 */
394 pushq %r13 /* pt_regs->r13 */
395 pushq %r14 /* pt_regs->r14 */
396 pushq %r15 /* pt_regs->r15 */
397 UNWIND_HINT_REGS
398
399 movq %rsp,%rdi /* RDI = pt_regs; RSI is already trapnr */
400 call do_early_exception
401
402 decl early_recursion_flag(%rip)
403 jmp restore_regs_and_return_to_kernel
404SYM_CODE_END(early_idt_handler_common)
405
406#ifdef CONFIG_AMD_MEM_ENCRYPT
407/*
408 * VC Exception handler used during very early boot. The
409 * early_idt_handler_array can't be used because it returns via the
410 * paravirtualized INTERRUPT_RETURN and pv-ops don't work that early.
411 *
412 * This handler will end up in the .init.text section and not be
413 * available to boot secondary CPUs.
414 */
415SYM_CODE_START_NOALIGN(vc_no_ghcb)
416 UNWIND_HINT_IRET_REGS offset=8
417
418 /* Build pt_regs */
419 PUSH_AND_CLEAR_REGS
420
421 /* Call C handler */
422 movq %rsp, %rdi
423 movq ORIG_RAX(%rsp), %rsi
424 call do_vc_no_ghcb
425
426 /* Unwind pt_regs */
427 POP_REGS
428
429 /* Remove Error Code */
430 addq $8, %rsp
431
432 /* Pure iret required here - don't use INTERRUPT_RETURN */
433 iretq
434SYM_CODE_END(vc_no_ghcb)
435#endif
436
437#define SYM_DATA_START_PAGE_ALIGNED(name) \
438 SYM_START(name, SYM_L_GLOBAL, .balign PAGE_SIZE)
439
440#ifdef CONFIG_PAGE_TABLE_ISOLATION
441/*
442 * Each PGD needs to be 8k long and 8k aligned. We do not
443 * ever go out to userspace with these, so we do not
444 * strictly *need* the second page, but this allows us to
445 * have a single set_pgd() implementation that does not
446 * need to worry about whether it has 4k or 8k to work
447 * with.
448 *
449 * This ensures PGDs are 8k long:
450 */
451#define PTI_USER_PGD_FILL 512
452/* This ensures they are 8k-aligned: */
453#define SYM_DATA_START_PTI_ALIGNED(name) \
454 SYM_START(name, SYM_L_GLOBAL, .balign 2 * PAGE_SIZE)
455#else
456#define SYM_DATA_START_PTI_ALIGNED(name) \
457 SYM_DATA_START_PAGE_ALIGNED(name)
458#define PTI_USER_PGD_FILL 0
459#endif
460
461/* Automate the creation of 1 to 1 mapping pmd entries */
462#define PMDS(START, PERM, COUNT) \
463 i = 0 ; \
464 .rept (COUNT) ; \
465 .quad (START) + (i << PMD_SHIFT) + (PERM) ; \
466 i = i + 1 ; \
467 .endr
468
469 __INITDATA
470 .balign 4
471
472SYM_DATA_START_PTI_ALIGNED(early_top_pgt)
473 .fill 512,8,0
474 .fill PTI_USER_PGD_FILL,8,0
475SYM_DATA_END(early_top_pgt)
476
477SYM_DATA_START_PAGE_ALIGNED(early_dynamic_pgts)
478 .fill 512*EARLY_DYNAMIC_PAGE_TABLES,8,0
479SYM_DATA_END(early_dynamic_pgts)
480
481SYM_DATA(early_recursion_flag, .long 0)
482
483 .data
484
485#if defined(CONFIG_XEN_PV) || defined(CONFIG_PVH)
486SYM_DATA_START_PTI_ALIGNED(init_top_pgt)
487 .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
488 .org init_top_pgt + L4_PAGE_OFFSET*8, 0
489 .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
490 .org init_top_pgt + L4_START_KERNEL*8, 0
491 /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
492 .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
493 .fill PTI_USER_PGD_FILL,8,0
494SYM_DATA_END(init_top_pgt)
495
496SYM_DATA_START_PAGE_ALIGNED(level3_ident_pgt)
497 .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
498 .fill 511, 8, 0
499SYM_DATA_END(level3_ident_pgt)
500SYM_DATA_START_PAGE_ALIGNED(level2_ident_pgt)
501 /*
502 * Since I easily can, map the first 1G.
503 * Don't set NX because code runs from these pages.
504 *
505 * Note: This sets _PAGE_GLOBAL despite whether
506 * the CPU supports it or it is enabled. But,
507 * the CPU should ignore the bit.
508 */
509 PMDS(0, __PAGE_KERNEL_IDENT_LARGE_EXEC, PTRS_PER_PMD)
510SYM_DATA_END(level2_ident_pgt)
511#else
512SYM_DATA_START_PTI_ALIGNED(init_top_pgt)
513 .fill 512,8,0
514 .fill PTI_USER_PGD_FILL,8,0
515SYM_DATA_END(init_top_pgt)
516#endif
517
518#ifdef CONFIG_X86_5LEVEL
519SYM_DATA_START_PAGE_ALIGNED(level4_kernel_pgt)
520 .fill 511,8,0
521 .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
522SYM_DATA_END(level4_kernel_pgt)
523#endif
524
525SYM_DATA_START_PAGE_ALIGNED(level3_kernel_pgt)
526 .fill L3_START_KERNEL,8,0
527 /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
528 .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
529 .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
530SYM_DATA_END(level3_kernel_pgt)
531
532SYM_DATA_START_PAGE_ALIGNED(level2_kernel_pgt)
533 /*
534 * Kernel high mapping.
535 *
536 * The kernel code+data+bss must be located below KERNEL_IMAGE_SIZE in
537 * virtual address space, which is 1 GiB if RANDOMIZE_BASE is enabled,
538 * 512 MiB otherwise.
539 *
540 * (NOTE: after that starts the module area, see MODULES_VADDR.)
541 *
542 * This table is eventually used by the kernel during normal runtime.
543 * Care must be taken to clear out undesired bits later, like _PAGE_RW
544 * or _PAGE_GLOBAL in some cases.
545 */
546 PMDS(0, __PAGE_KERNEL_LARGE_EXEC, KERNEL_IMAGE_SIZE/PMD_SIZE)
547SYM_DATA_END(level2_kernel_pgt)
548
549SYM_DATA_START_PAGE_ALIGNED(level2_fixmap_pgt)
550 .fill (512 - 4 - FIXMAP_PMD_NUM),8,0
551 pgtno = 0
552 .rept (FIXMAP_PMD_NUM)
553 .quad level1_fixmap_pgt + (pgtno << PAGE_SHIFT) - __START_KERNEL_map \
554 + _PAGE_TABLE_NOENC;
555 pgtno = pgtno + 1
556 .endr
557 /* 6 MB reserved space + a 2MB hole */
558 .fill 4,8,0
559SYM_DATA_END(level2_fixmap_pgt)
560
561SYM_DATA_START_PAGE_ALIGNED(level1_fixmap_pgt)
562 .rept (FIXMAP_PMD_NUM)
563 .fill 512,8,0
564 .endr
565SYM_DATA_END(level1_fixmap_pgt)
566
567#undef PMDS
568
569 .data
570 .align 16
571
572SYM_DATA(early_gdt_descr, .word GDT_ENTRIES*8-1)
573SYM_DATA_LOCAL(early_gdt_descr_base, .quad INIT_PER_CPU_VAR(gdt_page))
574
575 .align 16
576/* This must match the first entry in level2_kernel_pgt */
577SYM_DATA(phys_base, .quad 0x0)
578EXPORT_SYMBOL(phys_base)
579
580#include "../../x86/xen/xen-head.S"
581
582 __PAGE_ALIGNED_BSS
583SYM_DATA_START_PAGE_ALIGNED(empty_zero_page)
584 .skip PAGE_SIZE
585SYM_DATA_END(empty_zero_page)
586EXPORT_SYMBOL(empty_zero_page)
587