Loading...
1#
2# MMC/SD host controller drivers
3#
4
5comment "MMC/SD/SDIO Host Controller Drivers"
6
7config MMC_ARMMMCI
8 tristate "ARM AMBA Multimedia Card Interface support"
9 depends on ARM_AMBA
10 help
11 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
12 Interface (PL180 and PL181) support. If you have an ARM(R)
13 platform with a Multimedia Card slot, say Y or M here.
14
15 If unsure, say N.
16
17config MMC_PXA
18 tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
19 depends on ARCH_PXA
20 help
21 This selects the Intel(R) PXA(R) Multimedia card Interface.
22 If you have a PXA(R) platform with a Multimedia Card slot,
23 say Y or M here.
24
25 If unsure, say N.
26
27config MMC_SDHCI
28 tristate "Secure Digital Host Controller Interface support"
29 depends on HAS_DMA
30 help
31 This selects the generic Secure Digital Host Controller Interface.
32 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
33 and Toshiba(R). Most controllers found in laptops are of this type.
34
35 If you have a controller with this interface, say Y or M here. You
36 also need to enable an appropriate bus interface.
37
38 If unsure, say N.
39
40config MMC_SDHCI_IO_ACCESSORS
41 bool
42 depends on MMC_SDHCI
43 help
44 This is silent Kconfig symbol that is selected by the drivers that
45 need to overwrite SDHCI IO memory accessors.
46
47config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
48 bool
49 select MMC_SDHCI_IO_ACCESSORS
50 help
51 This option is selected by drivers running on big endian hosts
52 and performing I/O to a SDHCI controller through a bus that
53 implements a hardware byte swapper using a 32-bit datum.
54 This endian mapping mode is called "data invariance" and
55 has the effect of scrambling the addresses and formats of data
56 accessed in sizes other than the datum size.
57
58 This is the case for the Freescale eSDHC and Nintendo Wii SDHCI.
59
60config MMC_SDHCI_PCI
61 tristate "SDHCI support on PCI bus"
62 depends on MMC_SDHCI && PCI
63 help
64 This selects the PCI Secure Digital Host Controller Interface.
65 Most controllers found today are PCI devices.
66
67 If you have a controller with this interface, say Y or M here.
68
69 If unsure, say N.
70
71config MMC_RICOH_MMC
72 bool "Ricoh MMC Controller Disabler (EXPERIMENTAL)"
73 depends on MMC_SDHCI_PCI
74 help
75 This adds a pci quirk to disable Ricoh MMC Controller. This
76 proprietary controller is unnecessary because the SDHCI driver
77 supports MMC cards on the SD controller, but if it is not
78 disabled, it will steal the MMC cards away - rendering them
79 useless. It is safe to select this even if you don't
80 have a Ricoh based card reader.
81
82 If unsure, say Y.
83
84config MMC_SDHCI_PLTFM
85 tristate "SDHCI platform and OF driver helper"
86 depends on MMC_SDHCI
87 help
88 This selects the common helper functions support for Secure Digital
89 Host Controller Interface based platform and OF drivers.
90
91 If you have a controller with this interface, say Y or M here.
92
93 If unsure, say N.
94
95config MMC_SDHCI_OF_ESDHC
96 tristate "SDHCI OF support for the Freescale eSDHC controller"
97 depends on MMC_SDHCI_PLTFM
98 depends on PPC_OF
99 select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
100 help
101 This selects the Freescale eSDHC controller support.
102
103 If you have a controller with this interface, say Y or M here.
104
105 If unsure, say N.
106
107config MMC_SDHCI_OF_HLWD
108 tristate "SDHCI OF support for the Nintendo Wii SDHCI controllers"
109 depends on MMC_SDHCI_PLTFM
110 depends on PPC_OF
111 select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
112 help
113 This selects the Secure Digital Host Controller Interface (SDHCI)
114 found in the "Hollywood" chipset of the Nintendo Wii video game
115 console.
116
117 If you have a controller with this interface, say Y or M here.
118
119 If unsure, say N.
120
121config MMC_SDHCI_CNS3XXX
122 tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
123 depends on ARCH_CNS3XXX
124 depends on MMC_SDHCI_PLTFM
125 help
126 This selects the SDHCI support for CNS3xxx System-on-Chip devices.
127
128 If you have a controller with this interface, say Y or M here.
129
130 If unsure, say N.
131
132config MMC_SDHCI_ESDHC_IMX
133 tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
134 depends on ARCH_MXC
135 depends on MMC_SDHCI_PLTFM
136 select MMC_SDHCI_IO_ACCESSORS
137 help
138 This selects the Freescale eSDHC/uSDHC controller support
139 found on i.MX25, i.MX35 i.MX5x and i.MX6x.
140
141 If you have a controller with this interface, say Y or M here.
142
143 If unsure, say N.
144
145config MMC_SDHCI_DOVE
146 tristate "SDHCI support on Marvell's Dove SoC"
147 depends on ARCH_DOVE
148 depends on MMC_SDHCI_PLTFM
149 select MMC_SDHCI_IO_ACCESSORS
150 help
151 This selects the Secure Digital Host Controller Interface in
152 Marvell's Dove SoC.
153
154 If you have a controller with this interface, say Y or M here.
155
156 If unsure, say N.
157
158config MMC_SDHCI_TEGRA
159 tristate "SDHCI platform support for the Tegra SD/MMC Controller"
160 depends on ARCH_TEGRA
161 depends on MMC_SDHCI_PLTFM
162 select MMC_SDHCI_IO_ACCESSORS
163 help
164 This selects the Tegra SD/MMC controller. If you have a Tegra
165 platform with SD or MMC devices, say Y or M here.
166
167 If unsure, say N.
168
169config MMC_SDHCI_S3C
170 tristate "SDHCI support on Samsung S3C SoC"
171 depends on MMC_SDHCI && PLAT_SAMSUNG
172 help
173 This selects the Secure Digital Host Controller Interface (SDHCI)
174 often referrered to as the HSMMC block in some of the Samsung S3C
175 range of SoC.
176
177 Note, due to the problems with DMA, the DMA support is only
178 available with CONFIG_EXPERIMENTAL is selected.
179
180 If you have a controller with this interface, say Y or M here.
181
182 If unsure, say N.
183
184config MMC_SDHCI_PXAV3
185 tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
186 depends on CLKDEV_LOOKUP
187 select MMC_SDHCI
188 select MMC_SDHCI_PLTFM
189 default CPU_MMP2
190 help
191 This selects the Marvell(R) PXAV3 SD Host Controller.
192 If you have a MMP2 platform with SD Host Controller
193 and a card slot, say Y or M here.
194
195 If unsure, say N.
196
197config MMC_SDHCI_PXAV2
198 tristate "Marvell PXA9XX SD Host Controller support (PXAV2)"
199 depends on CLKDEV_LOOKUP
200 select MMC_SDHCI
201 select MMC_SDHCI_PLTFM
202 default CPU_PXA910
203 help
204 This selects the Marvell(R) PXAV2 SD Host Controller.
205 If you have a PXA9XX platform with SD Host Controller
206 and a card slot, say Y or M here.
207
208 If unsure, say N.
209
210config MMC_SDHCI_SPEAR
211 tristate "SDHCI support on ST SPEAr platform"
212 depends on MMC_SDHCI && PLAT_SPEAR
213 help
214 This selects the Secure Digital Host Controller Interface (SDHCI)
215 often referrered to as the HSMMC block in some of the ST SPEAR range
216 of SoC
217
218 If you have a controller with this interface, say Y or M here.
219
220 If unsure, say N.
221
222config MMC_SDHCI_S3C_DMA
223 bool "DMA support on S3C SDHCI"
224 depends on MMC_SDHCI_S3C && EXPERIMENTAL
225 help
226 Enable DMA support on the Samsung S3C SDHCI glue. The DMA
227 has proved to be problematic if the controller encounters
228 certain errors, and thus should be treated with care.
229
230 YMMV.
231
232config MMC_OMAP
233 tristate "TI OMAP Multimedia Card Interface support"
234 depends on ARCH_OMAP
235 select TPS65010 if MACH_OMAP_H2
236 help
237 This selects the TI OMAP Multimedia card Interface.
238 If you have an OMAP board with a Multimedia Card slot,
239 say Y or M here.
240
241 If unsure, say N.
242
243config MMC_OMAP_HS
244 tristate "TI OMAP High Speed Multimedia Card Interface support"
245 depends on SOC_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4
246 help
247 This selects the TI OMAP High Speed Multimedia card Interface.
248 If you have an OMAP2430 or OMAP3 board or OMAP4 board with a
249 Multimedia Card slot, say Y or M here.
250
251 If unsure, say N.
252
253config MMC_WBSD
254 tristate "Winbond W83L51xD SD/MMC Card Interface support"
255 depends on ISA_DMA_API
256 help
257 This selects the Winbond(R) W83L51xD Secure digital and
258 Multimedia card Interface.
259 If you have a machine with a integrated W83L518D or W83L519D
260 SD/MMC card reader, say Y or M here.
261
262 If unsure, say N.
263
264config MMC_AU1X
265 tristate "Alchemy AU1XX0 MMC Card Interface support"
266 depends on MIPS_ALCHEMY
267 help
268 This selects the AMD Alchemy(R) Multimedia card interface.
269 If you have a Alchemy platform with a MMC slot, say Y or M here.
270
271 If unsure, say N.
272
273choice
274 prompt "Atmel SD/MMC Driver"
275 depends on AVR32 || ARCH_AT91
276 default MMC_ATMELMCI if AVR32
277 help
278 Choose which driver to use for the Atmel MCI Silicon
279
280config MMC_AT91
281 tristate "AT91 SD/MMC Card Interface support (DEPRECATED)"
282 depends on ARCH_AT91
283 help
284 This selects the AT91 MCI controller. This driver will
285 be removed soon (for more information have a look to
286 Documentation/feature-removal-schedule.txt). Please use
287 MMC_ATMEL_MCI.
288
289 If unsure, say N.
290
291config MMC_ATMELMCI
292 tristate "Atmel Multimedia Card Interface support"
293 depends on AVR32 || ARCH_AT91
294 help
295 This selects the Atmel Multimedia Card Interface driver. If
296 you have an AT32 (AVR32) or AT91 platform with a Multimedia
297 Card slot, say Y or M here.
298
299 If unsure, say N.
300
301endchoice
302
303config MMC_ATMELMCI_DMA
304 bool "Atmel MCI DMA support"
305 depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE
306 help
307 Say Y here to have the Atmel MCI driver use a DMA engine to
308 do data transfers and thus increase the throughput and
309 reduce the CPU utilization.
310
311 If unsure, say N.
312
313config MMC_MSM
314 tristate "Qualcomm SDCC Controller Support"
315 depends on MMC && ARCH_MSM
316 help
317 This provides support for the SD/MMC cell found in the
318 MSM and QSD SOCs from Qualcomm. The controller also has
319 support for SDIO devices.
320
321config MMC_MXC
322 tristate "Freescale i.MX21/27/31 Multimedia Card Interface support"
323 depends on ARCH_MXC
324 help
325 This selects the Freescale i.MX21, i.MX27 and i.MX31 Multimedia card
326 Interface. If you have a i.MX platform with a Multimedia Card slot,
327 say Y or M here.
328
329 If unsure, say N.
330
331config MMC_MXS
332 tristate "Freescale MXS Multimedia Card Interface support"
333 depends on ARCH_MXS && MXS_DMA
334 help
335 This selects the Freescale SSP MMC controller found on MXS based
336 platforms like mx23/28.
337
338 If unsure, say N.
339
340config MMC_TIFM_SD
341 tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)"
342 depends on EXPERIMENTAL && PCI
343 select TIFM_CORE
344 help
345 Say Y here if you want to be able to access MMC/SD cards with
346 the Texas Instruments(R) Flash Media card reader, found in many
347 laptops.
348 This option 'selects' (turns on, enables) 'TIFM_CORE', but you
349 probably also need appropriate card reader host adapter, such as
350 'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support
351 (TIFM_7XX1)'.
352
353 To compile this driver as a module, choose M here: the
354 module will be called tifm_sd.
355
356config MMC_MVSDIO
357 tristate "Marvell MMC/SD/SDIO host driver"
358 depends on PLAT_ORION
359 ---help---
360 This selects the Marvell SDIO host driver.
361 SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
362 SoC controllers.
363
364 To compile this driver as a module, choose M here: the
365 module will be called mvsdio.
366
367config MMC_DAVINCI
368 tristate "TI DAVINCI Multimedia Card Interface support"
369 depends on ARCH_DAVINCI
370 help
371 This selects the TI DAVINCI Multimedia card Interface.
372 If you have an DAVINCI board with a Multimedia Card slot,
373 say Y or M here. If unsure, say N.
374
375config MMC_SPI
376 tristate "MMC/SD/SDIO over SPI"
377 depends on SPI_MASTER && !HIGHMEM && HAS_DMA
378 select CRC7
379 select CRC_ITU_T
380 help
381 Some systems access MMC/SD/SDIO cards using a SPI controller
382 instead of using a "native" MMC/SD/SDIO controller. This has a
383 disadvantage of being relatively high overhead, but a compensating
384 advantage of working on many systems without dedicated MMC/SD/SDIO
385 controllers.
386
387 If unsure, or if your system has no SPI master driver, say N.
388
389config MMC_S3C
390 tristate "Samsung S3C SD/MMC Card Interface support"
391 depends on ARCH_S3C24XX
392 help
393 This selects a driver for the MCI interface found in
394 Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
395 If you have a board based on one of those and a MMC/SD
396 slot, say Y or M here.
397
398 If unsure, say N.
399
400config MMC_S3C_HW_SDIO_IRQ
401 bool "Hardware support for SDIO IRQ"
402 depends on MMC_S3C
403 help
404 Enable the hardware support for SDIO interrupts instead of using
405 the generic polling code.
406
407choice
408 prompt "Samsung S3C SD/MMC transfer code"
409 depends on MMC_S3C
410
411config MMC_S3C_PIO
412 bool "Use PIO transfers only"
413 help
414 Use PIO to transfer data between memory and the hardware.
415
416 PIO is slower than DMA as it requires CPU instructions to
417 move the data. This has been the traditional default for
418 the S3C MCI driver.
419
420config MMC_S3C_DMA
421 bool "Use DMA transfers only (EXPERIMENTAL)"
422 depends on EXPERIMENTAL
423 help
424 Use DMA to transfer data between memory and the hardare.
425
426 Currently, the DMA support in this driver seems to not be
427 working properly and needs to be debugged before this
428 option is useful.
429
430config MMC_S3C_PIODMA
431 bool "Support for both PIO and DMA (EXPERIMENTAL)"
432 help
433 Compile both the PIO and DMA transfer routines into the
434 driver and let the platform select at run-time which one
435 is best.
436
437 See notes for the DMA option.
438
439endchoice
440
441config MMC_SDRICOH_CS
442 tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
443 depends on EXPERIMENTAL && PCI && PCMCIA
444 help
445 Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
446 card whenever you insert a MMC or SD card into the card slot.
447
448 To compile this driver as a module, choose M here: the
449 module will be called sdricoh_cs.
450
451config MMC_TMIO_CORE
452 tristate
453
454config MMC_TMIO
455 tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
456 depends on MFD_TMIO || MFD_ASIC3
457 select MMC_TMIO_CORE
458 help
459 This provides support for the SD/MMC cell found in TC6393XB,
460 T7L66XB and also HTC ASIC3
461
462config MMC_SDHI
463 tristate "SH-Mobile SDHI SD/SDIO controller support"
464 depends on SUPERH || ARCH_SHMOBILE
465 select MMC_TMIO_CORE
466 help
467 This provides support for the SDHI SD/SDIO controller found in
468 SuperH and ARM SH-Mobile SoCs
469
470config MMC_CB710
471 tristate "ENE CB710 MMC/SD Interface support"
472 depends on PCI
473 select CB710_CORE
474 help
475 This option enables support for MMC/SD part of ENE CB710/720 Flash
476 memory card reader found in some laptops (ie. some versions of
477 HP Compaq nx9500).
478
479 This driver can also be built as a module. If so, the module
480 will be called cb710-mmc.
481
482config MMC_VIA_SDMMC
483 tristate "VIA SD/MMC Card Reader Driver"
484 depends on PCI
485 help
486 This selects the VIA SD/MMC Card Reader driver, say Y or M here.
487 VIA provides one multi-functional card reader which integrated into
488 some motherboards manufactured by VIA. This card reader supports
489 SD/MMC/SDHC.
490 If you have a controller with this interface, say Y or M here.
491
492 If unsure, say N.
493
494config SDH_BFIN
495 tristate "Blackfin Secure Digital Host support"
496 depends on (BF54x && !BF544) || (BF51x && !BF512)
497 help
498 If you say yes here you will get support for the Blackfin on-chip
499 Secure Digital Host interface. This includes support for MMC and
500 SD cards.
501
502 To compile this driver as a module, choose M here: the
503 module will be called bfin_sdh.
504
505 If unsure, say N.
506
507config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
508 bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround"
509 depends on SDH_BFIN
510 help
511 If you say yes here SD-Cards may work on the EZkit.
512
513config MMC_DW
514 tristate "Synopsys DesignWare Memory Card Interface"
515 depends on ARM
516 help
517 This selects support for the Synopsys DesignWare Mobile Storage IP
518 block, this provides host support for SD and MMC interfaces, in both
519 PIO and external DMA modes.
520
521config MMC_DW_IDMAC
522 bool "Internal DMAC interface"
523 depends on MMC_DW
524 help
525 This selects support for the internal DMAC block within the Synopsys
526 Designware Mobile Storage IP block. This disables the external DMA
527 interface.
528
529config MMC_DW_PLTFM
530 tristate "Synopsys Designware MCI Support as platform device"
531 depends on MMC_DW
532 default y
533 help
534 This selects the common helper functions support for Host Controller
535 Interface based platform driver. Please select this option if the IP
536 is present as a platform device. This is the common interface for the
537 Synopsys Designware IP.
538
539 If you have a controller with this interface, say Y or M here.
540
541 If unsure, say Y.
542
543config MMC_DW_PCI
544 tristate "Synopsys Designware MCI support on PCI bus"
545 depends on MMC_DW && PCI
546 help
547 This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
548 Select this option if the IP is present on PCI platform.
549
550 If you have a controller with this interface, say Y or M here.
551
552 If unsure, say N.
553
554config MMC_SH_MMCIF
555 tristate "SuperH Internal MMCIF support"
556 depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE)
557 help
558 This selects the MMC Host Interface controller (MMCIF).
559
560 This driver supports MMCIF in sh7724/sh7757/sh7372.
561
562config MMC_JZ4740
563 tristate "JZ4740 SD/Multimedia Card Interface support"
564 depends on MACH_JZ4740
565 help
566 This selects support for the SD/MMC controller on Ingenic JZ4740
567 SoCs.
568 If you have a board based on such a SoC and with a SD/MMC slot,
569 say Y or M here.
570
571config MMC_VUB300
572 tristate "VUB300 USB to SDIO/SD/MMC Host Controller support"
573 depends on USB
574 help
575 This selects support for Elan Digital Systems' VUB300 chip.
576
577 The VUB300 is a USB-SDIO Host Controller Interface chip
578 that enables the host computer to use SDIO/SD/MMC cards
579 via a USB 2.0 or USB 1.1 host.
580
581 The VUB300 chip will be found in both physically separate
582 USB to SDIO/SD/MMC adapters and embedded on some motherboards.
583
584 The VUB300 chip supports SD and MMC memory cards in addition
585 to single and multifunction SDIO cards.
586
587 Some SDIO cards will need a firmware file to be loaded and
588 sent to VUB300 chip in order to achieve better data throughput.
589 Download these "Offload Pseudocode" from Elan Digital Systems'
590 web-site http://www.elandigitalsystems.com/support/downloads.php
591 and put them in /lib/firmware. Note that without these additional
592 firmware files the VUB300 chip will still function, but not at
593 the best obtainable data rate.
594
595 To compile this mmc host controller driver as a module,
596 choose M here: the module will be called vub300.
597
598 If you have a computer with an embedded VUB300 chip
599 or if you intend connecting a USB adapter based on a
600 VUB300 chip say Y or M here.
601
602config MMC_USHC
603 tristate "USB SD Host Controller (USHC) support"
604 depends on USB
605 help
606 This selects support for USB SD Host Controllers based on
607 the Cypress Astoria chip with firmware compliant with CSR's
608 USB SD Host Controller specification (CS-118793-SP).
609
610 CSR boards with this device include: USB<>SDIO (M1985v2),
611 and Ultrasira.
612
613 Note: These controllers only support SDIO cards and do not
614 support MMC or SD memory cards.
1#
2# MMC/SD host controller drivers
3#
4
5comment "MMC/SD/SDIO Host Controller Drivers"
6
7config MMC_ARMMMCI
8 tristate "ARM AMBA Multimedia Card Interface support"
9 depends on ARM_AMBA
10 help
11 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
12 Interface (PL180 and PL181) support. If you have an ARM(R)
13 platform with a Multimedia Card slot, say Y or M here.
14
15 If unsure, say N.
16
17config MMC_QCOM_DML
18 tristate "Qualcomm Data Mover for SD Card Controller"
19 depends on MMC_ARMMMCI && QCOM_BAM_DMA
20 default y
21 help
22 This selects the Qualcomm Data Mover lite/local on SD Card controller.
23 This option will enable the dma to work correctly, if you are using
24 Qcom SOCs and MMC, you would probably need this option to get DMA working.
25
26 if unsure, say N.
27
28config MMC_PXA
29 tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
30 depends on ARCH_PXA
31 help
32 This selects the Intel(R) PXA(R) Multimedia card Interface.
33 If you have a PXA(R) platform with a Multimedia Card slot,
34 say Y or M here.
35
36 If unsure, say N.
37
38config MMC_SDHCI
39 tristate "Secure Digital Host Controller Interface support"
40 depends on HAS_DMA
41 help
42 This selects the generic Secure Digital Host Controller Interface.
43 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
44 and Toshiba(R). Most controllers found in laptops are of this type.
45
46 If you have a controller with this interface, say Y or M here. You
47 also need to enable an appropriate bus interface.
48
49 If unsure, say N.
50
51config MMC_SDHCI_IO_ACCESSORS
52 bool
53 depends on MMC_SDHCI
54 help
55 This is silent Kconfig symbol that is selected by the drivers that
56 need to overwrite SDHCI IO memory accessors.
57
58config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
59 bool
60 depends on MMC_SDHCI
61 select MMC_SDHCI_IO_ACCESSORS
62 help
63 This option is selected by drivers running on big endian hosts
64 and performing I/O to a SDHCI controller through a bus that
65 implements a hardware byte swapper using a 32-bit datum.
66 This endian mapping mode is called "data invariance" and
67 has the effect of scrambling the addresses and formats of data
68 accessed in sizes other than the datum size.
69
70 This is the case for the Nintendo Wii SDHCI.
71
72config MMC_SDHCI_PCI
73 tristate "SDHCI support on PCI bus"
74 depends on MMC_SDHCI && PCI
75 help
76 This selects the PCI Secure Digital Host Controller Interface.
77 Most controllers found today are PCI devices.
78
79 If you have a controller with this interface, say Y or M here.
80
81 If unsure, say N.
82
83config MMC_RICOH_MMC
84 bool "Ricoh MMC Controller Disabler"
85 depends on MMC_SDHCI_PCI
86 default y
87 help
88 This adds a pci quirk to disable Ricoh MMC Controller. This
89 proprietary controller is unnecessary because the SDHCI driver
90 supports MMC cards on the SD controller, but if it is not
91 disabled, it will steal the MMC cards away - rendering them
92 useless. It is safe to select this even if you don't
93 have a Ricoh based card reader.
94
95 If unsure, say Y.
96
97config MMC_SDHCI_ACPI
98 tristate "SDHCI support for ACPI enumerated SDHCI controllers"
99 depends on MMC_SDHCI && ACPI
100 select IOSF_MBI if X86
101 help
102 This selects support for ACPI enumerated SDHCI controllers,
103 identified by ACPI Compatibility ID PNP0D40 or specific
104 ACPI Hardware IDs.
105
106 If you have a controller with this interface, say Y or M here.
107
108 If unsure, say N.
109
110config MMC_SDHCI_PLTFM
111 tristate "SDHCI platform and OF driver helper"
112 depends on MMC_SDHCI
113 help
114 This selects the common helper functions support for Secure Digital
115 Host Controller Interface based platform and OF drivers.
116
117 If you have a controller with this interface, say Y or M here.
118
119 If unsure, say N.
120
121config MMC_SDHCI_OF_ARASAN
122 tristate "SDHCI OF support for the Arasan SDHCI controllers"
123 depends on MMC_SDHCI_PLTFM
124 depends on OF
125 help
126 This selects the Arasan Secure Digital Host Controller Interface
127 (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
128
129 If you have a controller with this interface, say Y or M here.
130
131 If unsure, say N.
132
133config MMC_SDHCI_OF_AT91
134 tristate "SDHCI OF support for the Atmel SDMMC controller"
135 depends on MMC_SDHCI_PLTFM
136 depends on OF
137 select MMC_SDHCI_IO_ACCESSORS
138 help
139 This selects the Atmel SDMMC driver
140
141config MMC_SDHCI_OF_ESDHC
142 tristate "SDHCI OF support for the Freescale eSDHC controller"
143 depends on MMC_SDHCI_PLTFM
144 depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE
145 select MMC_SDHCI_IO_ACCESSORS
146 help
147 This selects the Freescale eSDHC controller support.
148
149 If you have a controller with this interface, say Y or M here.
150
151 If unsure, say N.
152
153config MMC_SDHCI_OF_HLWD
154 tristate "SDHCI OF support for the Nintendo Wii SDHCI controllers"
155 depends on MMC_SDHCI_PLTFM
156 depends on PPC
157 select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
158 help
159 This selects the Secure Digital Host Controller Interface (SDHCI)
160 found in the "Hollywood" chipset of the Nintendo Wii video game
161 console.
162
163 If you have a controller with this interface, say Y or M here.
164
165 If unsure, say N.
166
167config MMC_SDHCI_CNS3XXX
168 tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
169 depends on ARCH_CNS3XXX
170 depends on MMC_SDHCI_PLTFM
171 help
172 This selects the SDHCI support for CNS3xxx System-on-Chip devices.
173
174 If you have a controller with this interface, say Y or M here.
175
176 If unsure, say N.
177
178config MMC_SDHCI_ESDHC_IMX
179 tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
180 depends on ARCH_MXC
181 depends on MMC_SDHCI_PLTFM
182 select MMC_SDHCI_IO_ACCESSORS
183 help
184 This selects the Freescale eSDHC/uSDHC controller support
185 found on i.MX25, i.MX35 i.MX5x and i.MX6x.
186
187 If you have a controller with this interface, say Y or M here.
188
189 If unsure, say N.
190
191config MMC_SDHCI_DOVE
192 tristate "SDHCI support on Marvell's Dove SoC"
193 depends on ARCH_DOVE || MACH_DOVE
194 depends on MMC_SDHCI_PLTFM
195 select MMC_SDHCI_IO_ACCESSORS
196 help
197 This selects the Secure Digital Host Controller Interface in
198 Marvell's Dove SoC.
199
200 If you have a controller with this interface, say Y or M here.
201
202 If unsure, say N.
203
204config MMC_SDHCI_TEGRA
205 tristate "SDHCI platform support for the Tegra SD/MMC Controller"
206 depends on ARCH_TEGRA
207 depends on MMC_SDHCI_PLTFM
208 select MMC_SDHCI_IO_ACCESSORS
209 help
210 This selects the Tegra SD/MMC controller. If you have a Tegra
211 platform with SD or MMC devices, say Y or M here.
212
213 If unsure, say N.
214
215config MMC_SDHCI_S3C
216 tristate "SDHCI support on Samsung S3C SoC"
217 depends on MMC_SDHCI && PLAT_SAMSUNG
218 help
219 This selects the Secure Digital Host Controller Interface (SDHCI)
220 often referrered to as the HSMMC block in some of the Samsung S3C
221 range of SoC.
222
223 If you have a controller with this interface, say Y or M here.
224
225 If unsure, say N.
226
227config MMC_SDHCI_SIRF
228 tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
229 depends on ARCH_SIRF
230 depends on MMC_SDHCI_PLTFM
231 select MMC_SDHCI_IO_ACCESSORS
232 help
233 This selects the SDHCI support for SiRF System-on-Chip devices.
234
235 If you have a controller with this interface, say Y or M here.
236
237 If unsure, say N.
238
239config MMC_SDHCI_PXAV3
240 tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
241 depends on CLKDEV_LOOKUP
242 depends on MMC_SDHCI_PLTFM
243 depends on ARCH_BERLIN || ARCH_MMP || ARCH_MVEBU || COMPILE_TEST
244 default CPU_MMP2
245 help
246 This selects the Marvell(R) PXAV3 SD Host Controller.
247 If you have a MMP2 platform with SD Host Controller
248 and a card slot, say Y or M here.
249
250 If unsure, say N.
251
252config MMC_SDHCI_PXAV2
253 tristate "Marvell PXA9XX SD Host Controller support (PXAV2)"
254 depends on CLKDEV_LOOKUP
255 depends on MMC_SDHCI_PLTFM
256 depends on ARCH_MMP || COMPILE_TEST
257 default CPU_PXA910
258 help
259 This selects the Marvell(R) PXAV2 SD Host Controller.
260 If you have a PXA9XX platform with SD Host Controller
261 and a card slot, say Y or M here.
262
263 If unsure, say N.
264
265config MMC_SDHCI_SPEAR
266 tristate "SDHCI support on ST SPEAr platform"
267 depends on MMC_SDHCI && PLAT_SPEAR
268 depends on OF
269 help
270 This selects the Secure Digital Host Controller Interface (SDHCI)
271 often referrered to as the HSMMC block in some of the ST SPEAR range
272 of SoC
273
274 If you have a controller with this interface, say Y or M here.
275
276 If unsure, say N.
277
278config MMC_SDHCI_S3C_DMA
279 bool "DMA support on S3C SDHCI"
280 depends on MMC_SDHCI_S3C
281 help
282 Enable DMA support on the Samsung S3C SDHCI glue. The DMA
283 has proved to be problematic if the controller encounters
284 certain errors, and thus should be treated with care.
285
286 YMMV.
287
288config MMC_SDHCI_BCM_KONA
289 tristate "SDHCI support on Broadcom KONA platform"
290 depends on ARCH_BCM_MOBILE
291 depends on MMC_SDHCI_PLTFM
292 help
293 This selects the Broadcom Kona Secure Digital Host Controller
294 Interface(SDHCI) support.
295 This is used in Broadcom mobile SoCs.
296
297 If you have a controller with this interface, say Y or M here.
298
299config MMC_SDHCI_BCM2835
300 tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
301 depends on ARCH_BCM2835
302 depends on MMC_SDHCI_PLTFM
303 select MMC_SDHCI_IO_ACCESSORS
304 help
305 This selects the BCM2835 SD/MMC controller. If you have a BCM2835
306 platform with SD or MMC devices, say Y or M here.
307
308 If unsure, say N.
309
310config MMC_SDHCI_F_SDH30
311 tristate "SDHCI support for Fujitsu Semiconductor F_SDH30"
312 depends on MMC_SDHCI_PLTFM
313 depends on OF
314 help
315 This selects the Secure Digital Host Controller Interface (SDHCI)
316 Needed by some Fujitsu SoC for MMC / SD / SDIO support.
317 If you have a controller with this interface, say Y or M here.
318
319 If unsure, say N.
320
321config MMC_SDHCI_IPROC
322 tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
323 depends on ARCH_BCM2835 || ARCH_BCM_IPROC || COMPILE_TEST
324 depends on MMC_SDHCI_PLTFM
325 default ARCH_BCM_IPROC
326 select MMC_SDHCI_IO_ACCESSORS
327 help
328 This selects the iProc SD/MMC controller.
329
330 If you have a BCM2835 or IPROC platform with SD or MMC devices,
331 say Y or M here.
332
333 If unsure, say N.
334
335config MMC_MOXART
336 tristate "MOXART SD/MMC Host Controller support"
337 depends on ARCH_MOXART && MMC
338 help
339 This selects support for the MOXART SD/MMC Host Controller.
340 MOXA provides one multi-functional card reader which can
341 be found on some embedded hardware such as UC-7112-LX.
342 If you have a controller with this interface, say Y here.
343
344config MMC_SDHCI_ST
345 tristate "SDHCI support on STMicroelectronics SoC"
346 depends on ARCH_STI
347 depends on MMC_SDHCI_PLTFM
348 select MMC_SDHCI_IO_ACCESSORS
349 help
350 This selects the Secure Digital Host Controller Interface in
351 STMicroelectronics SoCs.
352
353 If you have a controller with this interface, say Y or M here.
354 If unsure, say N.
355
356config MMC_OMAP
357 tristate "TI OMAP Multimedia Card Interface support"
358 depends on ARCH_OMAP
359 depends on TPS65010 || !MACH_OMAP_H2
360 help
361 This selects the TI OMAP Multimedia card Interface.
362 If you have an OMAP board with a Multimedia Card slot,
363 say Y or M here.
364
365 If unsure, say N.
366
367config MMC_OMAP_HS
368 tristate "TI OMAP High Speed Multimedia Card Interface support"
369 depends on HAS_DMA
370 depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
371 help
372 This selects the TI OMAP High Speed Multimedia card Interface.
373 If you have an omap2plus board with a Multimedia Card slot,
374 say Y or M here.
375
376 If unsure, say N.
377
378config MMC_WBSD
379 tristate "Winbond W83L51xD SD/MMC Card Interface support"
380 depends on ISA_DMA_API
381 help
382 This selects the Winbond(R) W83L51xD Secure digital and
383 Multimedia card Interface.
384 If you have a machine with a integrated W83L518D or W83L519D
385 SD/MMC card reader, say Y or M here.
386
387 If unsure, say N.
388
389config MMC_AU1X
390 tristate "Alchemy AU1XX0 MMC Card Interface support"
391 depends on MIPS_ALCHEMY
392 help
393 This selects the AMD Alchemy(R) Multimedia card interface.
394 If you have a Alchemy platform with a MMC slot, say Y or M here.
395
396 If unsure, say N.
397
398config MMC_ATMELMCI
399 tristate "Atmel SD/MMC Driver (Multimedia Card Interface)"
400 depends on AVR32 || ARCH_AT91
401 help
402 This selects the Atmel Multimedia Card Interface driver. If
403 you have an AT32 (AVR32) or AT91 platform with a Multimedia
404 Card slot, say Y or M here.
405
406 If unsure, say N.
407
408config MMC_SDHCI_MSM
409 tristate "Qualcomm SDHCI Controller Support"
410 depends on ARCH_QCOM || (ARM && COMPILE_TEST)
411 depends on MMC_SDHCI_PLTFM
412 help
413 This selects the Secure Digital Host Controller Interface (SDHCI)
414 support present in Qualcomm SOCs. The controller supports
415 SD/MMC/SDIO devices.
416
417 If you have a controller with this interface, say Y or M here.
418
419 If unsure, say N.
420
421config MMC_MXC
422 tristate "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
423 depends on ARCH_MXC || PPC_MPC512x
424 help
425 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
426 Multimedia Card Interface. If you have an i.MX or MPC512x platform
427 with a Multimedia Card slot, say Y or M here.
428
429 If unsure, say N.
430
431config MMC_MXS
432 tristate "Freescale MXS Multimedia Card Interface support"
433 depends on ARCH_MXS && MXS_DMA
434 help
435 This selects the Freescale SSP MMC controller found on MXS based
436 platforms like mx23/28.
437
438 If unsure, say N.
439
440config MMC_TIFM_SD
441 tristate "TI Flash Media MMC/SD Interface support"
442 depends on PCI
443 select TIFM_CORE
444 help
445 Say Y here if you want to be able to access MMC/SD cards with
446 the Texas Instruments(R) Flash Media card reader, found in many
447 laptops.
448 This option 'selects' (turns on, enables) 'TIFM_CORE', but you
449 probably also need appropriate card reader host adapter, such as
450 'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support
451 (TIFM_7XX1)'.
452
453 To compile this driver as a module, choose M here: the
454 module will be called tifm_sd.
455
456config MMC_MVSDIO
457 tristate "Marvell MMC/SD/SDIO host driver"
458 depends on PLAT_ORION
459 depends on OF
460 ---help---
461 This selects the Marvell SDIO host driver.
462 SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
463 SoC controllers.
464
465 To compile this driver as a module, choose M here: the
466 module will be called mvsdio.
467
468config MMC_DAVINCI
469 tristate "TI DAVINCI Multimedia Card Interface support"
470 depends on ARCH_DAVINCI
471 help
472 This selects the TI DAVINCI Multimedia card Interface.
473 If you have an DAVINCI board with a Multimedia Card slot,
474 say Y or M here. If unsure, say N.
475
476config MMC_GOLDFISH
477 tristate "goldfish qemu Multimedia Card Interface support"
478 depends on HAS_DMA
479 depends on GOLDFISH || COMPILE_TEST
480 help
481 This selects the Goldfish Multimedia card Interface emulation
482 found on the Goldfish Android virtual device emulation.
483
484config MMC_SPI
485 tristate "MMC/SD/SDIO over SPI"
486 depends on SPI_MASTER && !HIGHMEM && HAS_DMA
487 select CRC7
488 select CRC_ITU_T
489 help
490 Some systems access MMC/SD/SDIO cards using a SPI controller
491 instead of using a "native" MMC/SD/SDIO controller. This has a
492 disadvantage of being relatively high overhead, but a compensating
493 advantage of working on many systems without dedicated MMC/SD/SDIO
494 controllers.
495
496 If unsure, or if your system has no SPI master driver, say N.
497
498config MMC_S3C
499 tristate "Samsung S3C SD/MMC Card Interface support"
500 depends on ARCH_S3C24XX
501 depends on S3C24XX_DMAC
502 help
503 This selects a driver for the MCI interface found in
504 Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
505 If you have a board based on one of those and a MMC/SD
506 slot, say Y or M here.
507
508 If unsure, say N.
509
510config MMC_S3C_HW_SDIO_IRQ
511 bool "Hardware support for SDIO IRQ"
512 depends on MMC_S3C
513 help
514 Enable the hardware support for SDIO interrupts instead of using
515 the generic polling code.
516
517choice
518 prompt "Samsung S3C SD/MMC transfer code"
519 depends on MMC_S3C
520
521config MMC_S3C_PIO
522 bool "Use PIO transfers only"
523 help
524 Use PIO to transfer data between memory and the hardware.
525
526 PIO is slower than DMA as it requires CPU instructions to
527 move the data. This has been the traditional default for
528 the S3C MCI driver.
529
530config MMC_S3C_DMA
531 bool "Use DMA transfers only"
532 help
533 Use DMA to transfer data between memory and the hardare.
534
535 Currently, the DMA support in this driver seems to not be
536 working properly and needs to be debugged before this
537 option is useful.
538
539endchoice
540
541config MMC_SDRICOH_CS
542 tristate "MMC/SD driver for Ricoh Bay1Controllers"
543 depends on PCI && PCMCIA
544 help
545 Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
546 card whenever you insert a MMC or SD card into the card slot.
547
548 To compile this driver as a module, choose M here: the
549 module will be called sdricoh_cs.
550
551config MMC_TMIO_CORE
552 tristate
553
554config MMC_TMIO
555 tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
556 depends on MFD_TMIO || MFD_ASIC3
557 select MMC_TMIO_CORE
558 help
559 This provides support for the SD/MMC cell found in TC6393XB,
560 T7L66XB and also HTC ASIC3
561
562config MMC_SDHI
563 tristate "SH-Mobile SDHI SD/SDIO controller support"
564 depends on SUPERH || ARM || ARM64
565 depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
566 select MMC_TMIO_CORE
567 help
568 This provides support for the SDHI SD/SDIO controller found in
569 SuperH and ARM SH-Mobile SoCs
570
571config MMC_CB710
572 tristate "ENE CB710 MMC/SD Interface support"
573 depends on PCI
574 select CB710_CORE
575 help
576 This option enables support for MMC/SD part of ENE CB710/720 Flash
577 memory card reader found in some laptops (ie. some versions of
578 HP Compaq nx9500).
579
580 This driver can also be built as a module. If so, the module
581 will be called cb710-mmc.
582
583config MMC_VIA_SDMMC
584 tristate "VIA SD/MMC Card Reader Driver"
585 depends on PCI
586 help
587 This selects the VIA SD/MMC Card Reader driver, say Y or M here.
588 VIA provides one multi-functional card reader which integrated into
589 some motherboards manufactured by VIA. This card reader supports
590 SD/MMC/SDHC.
591 If you have a controller with this interface, say Y or M here.
592
593 If unsure, say N.
594
595config SDH_BFIN
596 tristate "Blackfin Secure Digital Host support"
597 depends on (BF54x && !BF544) || (BF51x && !BF512)
598 help
599 If you say yes here you will get support for the Blackfin on-chip
600 Secure Digital Host interface. This includes support for MMC and
601 SD cards.
602
603 To compile this driver as a module, choose M here: the
604 module will be called bfin_sdh.
605
606 If unsure, say N.
607
608config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
609 bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround"
610 depends on SDH_BFIN
611 help
612 If you say yes here SD-Cards may work on the EZkit.
613
614config MMC_DW
615 tristate "Synopsys DesignWare Memory Card Interface"
616 depends on HAS_DMA
617 depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
618 help
619 This selects support for the Synopsys DesignWare Mobile Storage IP
620 block, this provides host support for SD and MMC interfaces, in both
621 PIO, internal DMA mode and external DMA mode.
622
623config MMC_DW_PLTFM
624 tristate "Synopsys Designware MCI Support as platform device"
625 depends on MMC_DW
626 default y
627 help
628 This selects the common helper functions support for Host Controller
629 Interface based platform driver. Please select this option if the IP
630 is present as a platform device. This is the common interface for the
631 Synopsys Designware IP.
632
633 If you have a controller with this interface, say Y or M here.
634
635 If unsure, say Y.
636
637config MMC_DW_EXYNOS
638 tristate "Exynos specific extensions for Synopsys DW Memory Card Interface"
639 depends on MMC_DW
640 select MMC_DW_PLTFM
641 help
642 This selects support for Samsung Exynos SoC specific extensions to the
643 Synopsys DesignWare Memory Card Interface driver. Select this option
644 for platforms based on Exynos4 and Exynos5 SoC's.
645
646config MMC_DW_K3
647 tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
648 depends on MMC_DW
649 select MMC_DW_PLTFM
650 help
651 This selects support for Hisilicon K3 SoC specific extensions to the
652 Synopsys DesignWare Memory Card Interface driver. Select this option
653 for platforms based on Hisilicon K3 SoC's.
654
655config MMC_DW_PCI
656 tristate "Synopsys Designware MCI support on PCI bus"
657 depends on MMC_DW && PCI
658 help
659 This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
660 Select this option if the IP is present on PCI platform.
661
662 If you have a controller with this interface, say Y or M here.
663
664 If unsure, say N.
665
666config MMC_DW_ROCKCHIP
667 tristate "Rockchip specific extensions for Synopsys DW Memory Card Interface"
668 depends on MMC_DW && ARCH_ROCKCHIP
669 select MMC_DW_PLTFM
670 help
671 This selects support for Rockchip SoC specific extensions to the
672 Synopsys DesignWare Memory Card Interface driver. Select this option
673 for platforms based on RK3066, RK3188 and RK3288 SoC's.
674
675config MMC_SH_MMCIF
676 tristate "SuperH Internal MMCIF support"
677 depends on HAS_DMA
678 depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
679 help
680 This selects the MMC Host Interface controller (MMCIF).
681
682 This driver supports MMCIF in sh7724/sh7757/sh7372.
683
684config MMC_JZ4740
685 tristate "JZ4740 SD/Multimedia Card Interface support"
686 depends on MACH_JZ4740
687 help
688 This selects support for the SD/MMC controller on Ingenic JZ4740
689 SoCs.
690 If you have a board based on such a SoC and with a SD/MMC slot,
691 say Y or M here.
692
693config MMC_VUB300
694 tristate "VUB300 USB to SDIO/SD/MMC Host Controller support"
695 depends on USB
696 help
697 This selects support for Elan Digital Systems' VUB300 chip.
698
699 The VUB300 is a USB-SDIO Host Controller Interface chip
700 that enables the host computer to use SDIO/SD/MMC cards
701 via a USB 2.0 or USB 1.1 host.
702
703 The VUB300 chip will be found in both physically separate
704 USB to SDIO/SD/MMC adapters and embedded on some motherboards.
705
706 The VUB300 chip supports SD and MMC memory cards in addition
707 to single and multifunction SDIO cards.
708
709 Some SDIO cards will need a firmware file to be loaded and
710 sent to VUB300 chip in order to achieve better data throughput.
711 Download these "Offload Pseudocode" from Elan Digital Systems'
712 web-site http://www.elandigitalsystems.com/support/downloads.php
713 and put them in /lib/firmware. Note that without these additional
714 firmware files the VUB300 chip will still function, but not at
715 the best obtainable data rate.
716
717 To compile this mmc host controller driver as a module,
718 choose M here: the module will be called vub300.
719
720 If you have a computer with an embedded VUB300 chip
721 or if you intend connecting a USB adapter based on a
722 VUB300 chip say Y or M here.
723
724config MMC_USHC
725 tristate "USB SD Host Controller (USHC) support"
726 depends on USB
727 help
728 This selects support for USB SD Host Controllers based on
729 the Cypress Astoria chip with firmware compliant with CSR's
730 USB SD Host Controller specification (CS-118793-SP).
731
732 CSR boards with this device include: USB<>SDIO (M1985v2),
733 and Ultrasira.
734
735 Note: These controllers only support SDIO cards and do not
736 support MMC or SD memory cards.
737
738config MMC_WMT
739 tristate "Wondermedia SD/MMC Host Controller support"
740 depends on ARCH_VT8500
741 default y
742 help
743 This selects support for the SD/MMC Host Controller on
744 Wondermedia WM8505/WM8650 based SoCs.
745
746 To compile this driver as a module, choose M here: the
747 module will be called wmt-sdmmc.
748
749config MMC_USDHI6ROL0
750 tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
751 depends on HAS_DMA
752 help
753 This selects support for the Renesas USDHI6ROL0 SD/SDIO
754 Host Controller
755
756config MMC_REALTEK_PCI
757 tristate "Realtek PCI-E SD/MMC Card Interface Driver"
758 depends on MFD_RTSX_PCI
759 help
760 Say Y here to include driver code to support SD/MMC card interface
761 of Realtek PCI-E card reader
762
763config MMC_REALTEK_USB
764 tristate "Realtek USB SD/MMC Card Interface Driver"
765 depends on MFD_RTSX_USB
766 help
767 Say Y here to include driver code to support SD/MMC card interface
768 of Realtek RTS5129/39 series card reader
769
770config MMC_SUNXI
771 tristate "Allwinner sunxi SD/MMC Host Controller support"
772 depends on ARCH_SUNXI
773 help
774 This selects support for the SD/MMC Host Controller on
775 Allwinner sunxi SoCs.
776
777config MMC_TOSHIBA_PCI
778 tristate "Toshiba Type A SD/MMC Card Interface Driver"
779 depends on PCI
780 help
781
782config MMC_MTK
783 tristate "MediaTek SD/MMC Card Interface support"
784 depends on HAS_DMA
785 help
786 This selects the MediaTek(R) Secure digital and Multimedia card Interface.
787 If you have a machine with a integrated SD/MMC card reader, say Y or M here.
788 This is needed if support for any SD/SDIO/MMC devices is required.
789 If unsure, say N.
790
791config MMC_SDHCI_MICROCHIP_PIC32
792 tristate "Microchip PIC32MZDA SDHCI support"
793 depends on MMC_SDHCI && PIC32MZDA && MMC_SDHCI_PLTFM
794 help
795 This selects the Secure Digital Host Controller Interface (SDHCI)
796 for PIC32MZDA platform.
797
798 If you have a controller with this interface, say Y or M here.
799
800 If unsure, say N.