Loading...
1/*
2 * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
3 *
4 * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
5 *
6 * Current driver maintained by Ben Dooks and Simtec Electronics
7 * Copyright (C) 2008 Simtec Electronics <ben-linux@fluff.org>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#include <linux/module.h>
15#include <linux/dma-mapping.h>
16#include <linux/clk.h>
17#include <linux/mmc/host.h>
18#include <linux/platform_device.h>
19#include <linux/cpufreq.h>
20#include <linux/debugfs.h>
21#include <linux/seq_file.h>
22#include <linux/gpio.h>
23#include <linux/irq.h>
24#include <linux/io.h>
25
26#include <mach/dma.h>
27
28#include <mach/regs-sdi.h>
29#include <mach/regs-gpio.h>
30
31#include <plat/mci.h>
32
33#include "s3cmci.h"
34
35#define DRIVER_NAME "s3c-mci"
36
37enum dbg_channels {
38 dbg_err = (1 << 0),
39 dbg_debug = (1 << 1),
40 dbg_info = (1 << 2),
41 dbg_irq = (1 << 3),
42 dbg_sg = (1 << 4),
43 dbg_dma = (1 << 5),
44 dbg_pio = (1 << 6),
45 dbg_fail = (1 << 7),
46 dbg_conf = (1 << 8),
47};
48
49static const int dbgmap_err = dbg_fail;
50static const int dbgmap_info = dbg_info | dbg_conf;
51static const int dbgmap_debug = dbg_err | dbg_debug;
52
53#define dbg(host, channels, args...) \
54 do { \
55 if (dbgmap_err & channels) \
56 dev_err(&host->pdev->dev, args); \
57 else if (dbgmap_info & channels) \
58 dev_info(&host->pdev->dev, args); \
59 else if (dbgmap_debug & channels) \
60 dev_dbg(&host->pdev->dev, args); \
61 } while (0)
62
63static struct s3c2410_dma_client s3cmci_dma_client = {
64 .name = "s3c-mci",
65};
66
67static void finalize_request(struct s3cmci_host *host);
68static void s3cmci_send_request(struct mmc_host *mmc);
69static void s3cmci_reset(struct s3cmci_host *host);
70
71#ifdef CONFIG_MMC_DEBUG
72
73static void dbg_dumpregs(struct s3cmci_host *host, char *prefix)
74{
75 u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize;
76 u32 datcon, datcnt, datsta, fsta, imask;
77
78 con = readl(host->base + S3C2410_SDICON);
79 pre = readl(host->base + S3C2410_SDIPRE);
80 cmdarg = readl(host->base + S3C2410_SDICMDARG);
81 cmdcon = readl(host->base + S3C2410_SDICMDCON);
82 cmdsta = readl(host->base + S3C2410_SDICMDSTAT);
83 r0 = readl(host->base + S3C2410_SDIRSP0);
84 r1 = readl(host->base + S3C2410_SDIRSP1);
85 r2 = readl(host->base + S3C2410_SDIRSP2);
86 r3 = readl(host->base + S3C2410_SDIRSP3);
87 timer = readl(host->base + S3C2410_SDITIMER);
88 bsize = readl(host->base + S3C2410_SDIBSIZE);
89 datcon = readl(host->base + S3C2410_SDIDCON);
90 datcnt = readl(host->base + S3C2410_SDIDCNT);
91 datsta = readl(host->base + S3C2410_SDIDSTA);
92 fsta = readl(host->base + S3C2410_SDIFSTA);
93 imask = readl(host->base + host->sdiimsk);
94
95 dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n",
96 prefix, con, pre, timer);
97
98 dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n",
99 prefix, cmdcon, cmdarg, cmdsta);
100
101 dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]"
102 " DSTA:[%08x] DCNT:[%08x]\n",
103 prefix, datcon, fsta, datsta, datcnt);
104
105 dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]"
106 " R2:[%08x] R3:[%08x]\n",
107 prefix, r0, r1, r2, r3);
108}
109
110static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
111 int stop)
112{
113 snprintf(host->dbgmsg_cmd, 300,
114 "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u",
115 host->ccnt, (stop ? " (STOP)" : ""),
116 cmd->opcode, cmd->arg, cmd->flags, cmd->retries);
117
118 if (cmd->data) {
119 snprintf(host->dbgmsg_dat, 300,
120 "#%u bsize:%u blocks:%u bytes:%u",
121 host->dcnt, cmd->data->blksz,
122 cmd->data->blocks,
123 cmd->data->blocks * cmd->data->blksz);
124 } else {
125 host->dbgmsg_dat[0] = '\0';
126 }
127}
128
129static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd,
130 int fail)
131{
132 unsigned int dbglvl = fail ? dbg_fail : dbg_debug;
133
134 if (!cmd)
135 return;
136
137 if (cmd->error == 0) {
138 dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n",
139 host->dbgmsg_cmd, cmd->resp[0]);
140 } else {
141 dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n",
142 cmd->error, host->dbgmsg_cmd, host->status);
143 }
144
145 if (!cmd->data)
146 return;
147
148 if (cmd->data->error == 0) {
149 dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat);
150 } else {
151 dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n",
152 cmd->data->error, host->dbgmsg_dat,
153 readl(host->base + S3C2410_SDIDCNT));
154 }
155}
156#else
157static void dbg_dumpcmd(struct s3cmci_host *host,
158 struct mmc_command *cmd, int fail) { }
159
160static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
161 int stop) { }
162
163static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { }
164
165#endif /* CONFIG_MMC_DEBUG */
166
167/**
168 * s3cmci_host_usedma - return whether the host is using dma or pio
169 * @host: The host state
170 *
171 * Return true if the host is using DMA to transfer data, else false
172 * to use PIO mode. Will return static data depending on the driver
173 * configuration.
174 */
175static inline bool s3cmci_host_usedma(struct s3cmci_host *host)
176{
177#ifdef CONFIG_MMC_S3C_PIO
178 return false;
179#elif defined(CONFIG_MMC_S3C_DMA)
180 return true;
181#else
182 return host->dodma;
183#endif
184}
185
186/**
187 * s3cmci_host_canpio - return true if host has pio code available
188 *
189 * Return true if the driver has been compiled with the PIO support code
190 * available.
191 */
192static inline bool s3cmci_host_canpio(void)
193{
194#ifdef CONFIG_MMC_S3C_PIO
195 return true;
196#else
197 return false;
198#endif
199}
200
201static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
202{
203 u32 newmask;
204
205 newmask = readl(host->base + host->sdiimsk);
206 newmask |= imask;
207
208 writel(newmask, host->base + host->sdiimsk);
209
210 return newmask;
211}
212
213static inline u32 disable_imask(struct s3cmci_host *host, u32 imask)
214{
215 u32 newmask;
216
217 newmask = readl(host->base + host->sdiimsk);
218 newmask &= ~imask;
219
220 writel(newmask, host->base + host->sdiimsk);
221
222 return newmask;
223}
224
225static inline void clear_imask(struct s3cmci_host *host)
226{
227 u32 mask = readl(host->base + host->sdiimsk);
228
229 /* preserve the SDIO IRQ mask state */
230 mask &= S3C2410_SDIIMSK_SDIOIRQ;
231 writel(mask, host->base + host->sdiimsk);
232}
233
234/**
235 * s3cmci_check_sdio_irq - test whether the SDIO IRQ is being signalled
236 * @host: The host to check.
237 *
238 * Test to see if the SDIO interrupt is being signalled in case the
239 * controller has failed to re-detect a card interrupt. Read GPE8 and
240 * see if it is low and if so, signal a SDIO interrupt.
241 *
242 * This is currently called if a request is finished (we assume that the
243 * bus is now idle) and when the SDIO IRQ is enabled in case the IRQ is
244 * already being indicated.
245*/
246static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
247{
248 if (host->sdio_irqen) {
249 if (gpio_get_value(S3C2410_GPE(8)) == 0) {
250 pr_debug("%s: signalling irq\n", __func__);
251 mmc_signal_sdio_irq(host->mmc);
252 }
253 }
254}
255
256static inline int get_data_buffer(struct s3cmci_host *host,
257 u32 *bytes, u32 **pointer)
258{
259 struct scatterlist *sg;
260
261 if (host->pio_active == XFER_NONE)
262 return -EINVAL;
263
264 if ((!host->mrq) || (!host->mrq->data))
265 return -EINVAL;
266
267 if (host->pio_sgptr >= host->mrq->data->sg_len) {
268 dbg(host, dbg_debug, "no more buffers (%i/%i)\n",
269 host->pio_sgptr, host->mrq->data->sg_len);
270 return -EBUSY;
271 }
272 sg = &host->mrq->data->sg[host->pio_sgptr];
273
274 *bytes = sg->length;
275 *pointer = sg_virt(sg);
276
277 host->pio_sgptr++;
278
279 dbg(host, dbg_sg, "new buffer (%i/%i)\n",
280 host->pio_sgptr, host->mrq->data->sg_len);
281
282 return 0;
283}
284
285static inline u32 fifo_count(struct s3cmci_host *host)
286{
287 u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
288
289 fifostat &= S3C2410_SDIFSTA_COUNTMASK;
290 return fifostat;
291}
292
293static inline u32 fifo_free(struct s3cmci_host *host)
294{
295 u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
296
297 fifostat &= S3C2410_SDIFSTA_COUNTMASK;
298 return 63 - fifostat;
299}
300
301/**
302 * s3cmci_enable_irq - enable IRQ, after having disabled it.
303 * @host: The device state.
304 * @more: True if more IRQs are expected from transfer.
305 *
306 * Enable the main IRQ if needed after it has been disabled.
307 *
308 * The IRQ can be one of the following states:
309 * - disabled during IDLE
310 * - disabled whilst processing data
311 * - enabled during transfer
312 * - enabled whilst awaiting SDIO interrupt detection
313 */
314static void s3cmci_enable_irq(struct s3cmci_host *host, bool more)
315{
316 unsigned long flags;
317 bool enable = false;
318
319 local_irq_save(flags);
320
321 host->irq_enabled = more;
322 host->irq_disabled = false;
323
324 enable = more | host->sdio_irqen;
325
326 if (host->irq_state != enable) {
327 host->irq_state = enable;
328
329 if (enable)
330 enable_irq(host->irq);
331 else
332 disable_irq(host->irq);
333 }
334
335 local_irq_restore(flags);
336}
337
338/**
339 *
340 */
341static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer)
342{
343 unsigned long flags;
344
345 local_irq_save(flags);
346
347 /* pr_debug("%s: transfer %d\n", __func__, transfer); */
348
349 host->irq_disabled = transfer;
350
351 if (transfer && host->irq_state) {
352 host->irq_state = false;
353 disable_irq(host->irq);
354 }
355
356 local_irq_restore(flags);
357}
358
359static void do_pio_read(struct s3cmci_host *host)
360{
361 int res;
362 u32 fifo;
363 u32 *ptr;
364 u32 fifo_words;
365 void __iomem *from_ptr;
366
367 /* write real prescaler to host, it might be set slow to fix */
368 writel(host->prescaler, host->base + S3C2410_SDIPRE);
369
370 from_ptr = host->base + host->sdidata;
371
372 while ((fifo = fifo_count(host))) {
373 if (!host->pio_bytes) {
374 res = get_data_buffer(host, &host->pio_bytes,
375 &host->pio_ptr);
376 if (res) {
377 host->pio_active = XFER_NONE;
378 host->complete_what = COMPLETION_FINALIZE;
379
380 dbg(host, dbg_pio, "pio_read(): "
381 "complete (no more data).\n");
382 return;
383 }
384
385 dbg(host, dbg_pio,
386 "pio_read(): new target: [%i]@[%p]\n",
387 host->pio_bytes, host->pio_ptr);
388 }
389
390 dbg(host, dbg_pio,
391 "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n",
392 fifo, host->pio_bytes,
393 readl(host->base + S3C2410_SDIDCNT));
394
395 /* If we have reached the end of the block, we can
396 * read a word and get 1 to 3 bytes. If we in the
397 * middle of the block, we have to read full words,
398 * otherwise we will write garbage, so round down to
399 * an even multiple of 4. */
400 if (fifo >= host->pio_bytes)
401 fifo = host->pio_bytes;
402 else
403 fifo -= fifo & 3;
404
405 host->pio_bytes -= fifo;
406 host->pio_count += fifo;
407
408 fifo_words = fifo >> 2;
409 ptr = host->pio_ptr;
410 while (fifo_words--)
411 *ptr++ = readl(from_ptr);
412 host->pio_ptr = ptr;
413
414 if (fifo & 3) {
415 u32 n = fifo & 3;
416 u32 data = readl(from_ptr);
417 u8 *p = (u8 *)host->pio_ptr;
418
419 while (n--) {
420 *p++ = data;
421 data >>= 8;
422 }
423 }
424 }
425
426 if (!host->pio_bytes) {
427 res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr);
428 if (res) {
429 dbg(host, dbg_pio,
430 "pio_read(): complete (no more buffers).\n");
431 host->pio_active = XFER_NONE;
432 host->complete_what = COMPLETION_FINALIZE;
433
434 return;
435 }
436 }
437
438 enable_imask(host,
439 S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST);
440}
441
442static void do_pio_write(struct s3cmci_host *host)
443{
444 void __iomem *to_ptr;
445 int res;
446 u32 fifo;
447 u32 *ptr;
448
449 to_ptr = host->base + host->sdidata;
450
451 while ((fifo = fifo_free(host)) > 3) {
452 if (!host->pio_bytes) {
453 res = get_data_buffer(host, &host->pio_bytes,
454 &host->pio_ptr);
455 if (res) {
456 dbg(host, dbg_pio,
457 "pio_write(): complete (no more data).\n");
458 host->pio_active = XFER_NONE;
459
460 return;
461 }
462
463 dbg(host, dbg_pio,
464 "pio_write(): new source: [%i]@[%p]\n",
465 host->pio_bytes, host->pio_ptr);
466
467 }
468
469 /* If we have reached the end of the block, we have to
470 * write exactly the remaining number of bytes. If we
471 * in the middle of the block, we have to write full
472 * words, so round down to an even multiple of 4. */
473 if (fifo >= host->pio_bytes)
474 fifo = host->pio_bytes;
475 else
476 fifo -= fifo & 3;
477
478 host->pio_bytes -= fifo;
479 host->pio_count += fifo;
480
481 fifo = (fifo + 3) >> 2;
482 ptr = host->pio_ptr;
483 while (fifo--)
484 writel(*ptr++, to_ptr);
485 host->pio_ptr = ptr;
486 }
487
488 enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
489}
490
491static void pio_tasklet(unsigned long data)
492{
493 struct s3cmci_host *host = (struct s3cmci_host *) data;
494
495 s3cmci_disable_irq(host, true);
496
497 if (host->pio_active == XFER_WRITE)
498 do_pio_write(host);
499
500 if (host->pio_active == XFER_READ)
501 do_pio_read(host);
502
503 if (host->complete_what == COMPLETION_FINALIZE) {
504 clear_imask(host);
505 if (host->pio_active != XFER_NONE) {
506 dbg(host, dbg_err, "unfinished %s "
507 "- pio_count:[%u] pio_bytes:[%u]\n",
508 (host->pio_active == XFER_READ) ? "read" : "write",
509 host->pio_count, host->pio_bytes);
510
511 if (host->mrq->data)
512 host->mrq->data->error = -EINVAL;
513 }
514
515 s3cmci_enable_irq(host, false);
516 finalize_request(host);
517 } else
518 s3cmci_enable_irq(host, true);
519}
520
521/*
522 * ISR for SDI Interface IRQ
523 * Communication between driver and ISR works as follows:
524 * host->mrq points to current request
525 * host->complete_what Indicates when the request is considered done
526 * COMPLETION_CMDSENT when the command was sent
527 * COMPLETION_RSPFIN when a response was received
528 * COMPLETION_XFERFINISH when the data transfer is finished
529 * COMPLETION_XFERFINISH_RSPFIN both of the above.
530 * host->complete_request is the completion-object the driver waits for
531 *
532 * 1) Driver sets up host->mrq and host->complete_what
533 * 2) Driver prepares the transfer
534 * 3) Driver enables interrupts
535 * 4) Driver starts transfer
536 * 5) Driver waits for host->complete_rquest
537 * 6) ISR checks for request status (errors and success)
538 * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error
539 * 7) ISR completes host->complete_request
540 * 8) ISR disables interrupts
541 * 9) Driver wakes up and takes care of the request
542 *
543 * Note: "->error"-fields are expected to be set to 0 before the request
544 * was issued by mmc.c - therefore they are only set, when an error
545 * contition comes up
546 */
547
548static irqreturn_t s3cmci_irq(int irq, void *dev_id)
549{
550 struct s3cmci_host *host = dev_id;
551 struct mmc_command *cmd;
552 u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
553 u32 mci_cclear = 0, mci_dclear;
554 unsigned long iflags;
555
556 mci_dsta = readl(host->base + S3C2410_SDIDSTA);
557 mci_imsk = readl(host->base + host->sdiimsk);
558
559 if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) {
560 if (mci_imsk & S3C2410_SDIIMSK_SDIOIRQ) {
561 mci_dclear = S3C2410_SDIDSTA_SDIOIRQDETECT;
562 writel(mci_dclear, host->base + S3C2410_SDIDSTA);
563
564 mmc_signal_sdio_irq(host->mmc);
565 return IRQ_HANDLED;
566 }
567 }
568
569 spin_lock_irqsave(&host->complete_lock, iflags);
570
571 mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
572 mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
573 mci_fsta = readl(host->base + S3C2410_SDIFSTA);
574 mci_dclear = 0;
575
576 if ((host->complete_what == COMPLETION_NONE) ||
577 (host->complete_what == COMPLETION_FINALIZE)) {
578 host->status = "nothing to complete";
579 clear_imask(host);
580 goto irq_out;
581 }
582
583 if (!host->mrq) {
584 host->status = "no active mrq";
585 clear_imask(host);
586 goto irq_out;
587 }
588
589 cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd;
590
591 if (!cmd) {
592 host->status = "no active cmd";
593 clear_imask(host);
594 goto irq_out;
595 }
596
597 if (!s3cmci_host_usedma(host)) {
598 if ((host->pio_active == XFER_WRITE) &&
599 (mci_fsta & S3C2410_SDIFSTA_TFDET)) {
600
601 disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
602 tasklet_schedule(&host->pio_tasklet);
603 host->status = "pio tx";
604 }
605
606 if ((host->pio_active == XFER_READ) &&
607 (mci_fsta & S3C2410_SDIFSTA_RFDET)) {
608
609 disable_imask(host,
610 S3C2410_SDIIMSK_RXFIFOHALF |
611 S3C2410_SDIIMSK_RXFIFOLAST);
612
613 tasklet_schedule(&host->pio_tasklet);
614 host->status = "pio rx";
615 }
616 }
617
618 if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
619 dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n");
620 cmd->error = -ETIMEDOUT;
621 host->status = "error: command timeout";
622 goto fail_transfer;
623 }
624
625 if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) {
626 if (host->complete_what == COMPLETION_CMDSENT) {
627 host->status = "ok: command sent";
628 goto close_transfer;
629 }
630
631 mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT;
632 }
633
634 if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) {
635 if (cmd->flags & MMC_RSP_CRC) {
636 if (host->mrq->cmd->flags & MMC_RSP_136) {
637 dbg(host, dbg_irq,
638 "fixup: ignore CRC fail with long rsp\n");
639 } else {
640 /* note, we used to fail the transfer
641 * here, but it seems that this is just
642 * the hardware getting it wrong.
643 *
644 * cmd->error = -EILSEQ;
645 * host->status = "error: bad command crc";
646 * goto fail_transfer;
647 */
648 }
649 }
650
651 mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL;
652 }
653
654 if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) {
655 if (host->complete_what == COMPLETION_RSPFIN) {
656 host->status = "ok: command response received";
657 goto close_transfer;
658 }
659
660 if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
661 host->complete_what = COMPLETION_XFERFINISH;
662
663 mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN;
664 }
665
666 /* errors handled after this point are only relevant
667 when a data transfer is in progress */
668
669 if (!cmd->data)
670 goto clear_status_bits;
671
672 /* Check for FIFO failure */
673 if (host->is2440) {
674 if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) {
675 dbg(host, dbg_err, "FIFO failure\n");
676 host->mrq->data->error = -EILSEQ;
677 host->status = "error: 2440 fifo failure";
678 goto fail_transfer;
679 }
680 } else {
681 if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) {
682 dbg(host, dbg_err, "FIFO failure\n");
683 cmd->data->error = -EILSEQ;
684 host->status = "error: fifo failure";
685 goto fail_transfer;
686 }
687 }
688
689 if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) {
690 dbg(host, dbg_err, "bad data crc (outgoing)\n");
691 cmd->data->error = -EILSEQ;
692 host->status = "error: bad data crc (outgoing)";
693 goto fail_transfer;
694 }
695
696 if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) {
697 dbg(host, dbg_err, "bad data crc (incoming)\n");
698 cmd->data->error = -EILSEQ;
699 host->status = "error: bad data crc (incoming)";
700 goto fail_transfer;
701 }
702
703 if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) {
704 dbg(host, dbg_err, "data timeout\n");
705 cmd->data->error = -ETIMEDOUT;
706 host->status = "error: data timeout";
707 goto fail_transfer;
708 }
709
710 if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) {
711 if (host->complete_what == COMPLETION_XFERFINISH) {
712 host->status = "ok: data transfer completed";
713 goto close_transfer;
714 }
715
716 if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
717 host->complete_what = COMPLETION_RSPFIN;
718
719 mci_dclear |= S3C2410_SDIDSTA_XFERFINISH;
720 }
721
722clear_status_bits:
723 writel(mci_cclear, host->base + S3C2410_SDICMDSTAT);
724 writel(mci_dclear, host->base + S3C2410_SDIDSTA);
725
726 goto irq_out;
727
728fail_transfer:
729 host->pio_active = XFER_NONE;
730
731close_transfer:
732 host->complete_what = COMPLETION_FINALIZE;
733
734 clear_imask(host);
735 tasklet_schedule(&host->pio_tasklet);
736
737 goto irq_out;
738
739irq_out:
740 dbg(host, dbg_irq,
741 "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n",
742 mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status);
743
744 spin_unlock_irqrestore(&host->complete_lock, iflags);
745 return IRQ_HANDLED;
746
747}
748
749/*
750 * ISR for the CardDetect Pin
751*/
752
753static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
754{
755 struct s3cmci_host *host = (struct s3cmci_host *)dev_id;
756
757 dbg(host, dbg_irq, "card detect\n");
758
759 mmc_detect_change(host->mmc, msecs_to_jiffies(500));
760
761 return IRQ_HANDLED;
762}
763
764static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch,
765 void *buf_id, int size,
766 enum s3c2410_dma_buffresult result)
767{
768 struct s3cmci_host *host = buf_id;
769 unsigned long iflags;
770 u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt;
771
772 mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
773 mci_dsta = readl(host->base + S3C2410_SDIDSTA);
774 mci_fsta = readl(host->base + S3C2410_SDIFSTA);
775 mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
776
777 BUG_ON(!host->mrq);
778 BUG_ON(!host->mrq->data);
779 BUG_ON(!host->dmatogo);
780
781 spin_lock_irqsave(&host->complete_lock, iflags);
782
783 if (result != S3C2410_RES_OK) {
784 dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x "
785 "fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n",
786 mci_csta, mci_dsta, mci_fsta,
787 mci_dcnt, result, host->dmatogo);
788
789 goto fail_request;
790 }
791
792 host->dmatogo--;
793 if (host->dmatogo) {
794 dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] "
795 "DCNT:[%08x] toGo:%u\n",
796 size, mci_dsta, mci_dcnt, host->dmatogo);
797
798 goto out;
799 }
800
801 dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n",
802 size, mci_dsta, mci_dcnt);
803
804 host->dma_complete = 1;
805 host->complete_what = COMPLETION_FINALIZE;
806
807out:
808 tasklet_schedule(&host->pio_tasklet);
809 spin_unlock_irqrestore(&host->complete_lock, iflags);
810 return;
811
812fail_request:
813 host->mrq->data->error = -EINVAL;
814 host->complete_what = COMPLETION_FINALIZE;
815 clear_imask(host);
816
817 goto out;
818}
819
820static void finalize_request(struct s3cmci_host *host)
821{
822 struct mmc_request *mrq = host->mrq;
823 struct mmc_command *cmd;
824 int debug_as_failure = 0;
825
826 if (host->complete_what != COMPLETION_FINALIZE)
827 return;
828
829 if (!mrq)
830 return;
831 cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
832
833 if (cmd->data && (cmd->error == 0) &&
834 (cmd->data->error == 0)) {
835 if (s3cmci_host_usedma(host) && (!host->dma_complete)) {
836 dbg(host, dbg_dma, "DMA Missing (%d)!\n",
837 host->dma_complete);
838 return;
839 }
840 }
841
842 /* Read response from controller. */
843 cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0);
844 cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1);
845 cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2);
846 cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3);
847
848 writel(host->prescaler, host->base + S3C2410_SDIPRE);
849
850 if (cmd->error)
851 debug_as_failure = 1;
852
853 if (cmd->data && cmd->data->error)
854 debug_as_failure = 1;
855
856 dbg_dumpcmd(host, cmd, debug_as_failure);
857
858 /* Cleanup controller */
859 writel(0, host->base + S3C2410_SDICMDARG);
860 writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
861 writel(0, host->base + S3C2410_SDICMDCON);
862 clear_imask(host);
863
864 if (cmd->data && cmd->error)
865 cmd->data->error = cmd->error;
866
867 if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) {
868 host->cmd_is_stop = 1;
869 s3cmci_send_request(host->mmc);
870 return;
871 }
872
873 /* If we have no data transfer we are finished here */
874 if (!mrq->data)
875 goto request_done;
876
877 /* Calculate the amout of bytes transfer if there was no error */
878 if (mrq->data->error == 0) {
879 mrq->data->bytes_xfered =
880 (mrq->data->blocks * mrq->data->blksz);
881 } else {
882 mrq->data->bytes_xfered = 0;
883 }
884
885 /* If we had an error while transferring data we flush the
886 * DMA channel and the fifo to clear out any garbage. */
887 if (mrq->data->error != 0) {
888 if (s3cmci_host_usedma(host))
889 s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
890
891 if (host->is2440) {
892 /* Clear failure register and reset fifo. */
893 writel(S3C2440_SDIFSTA_FIFORESET |
894 S3C2440_SDIFSTA_FIFOFAIL,
895 host->base + S3C2410_SDIFSTA);
896 } else {
897 u32 mci_con;
898
899 /* reset fifo */
900 mci_con = readl(host->base + S3C2410_SDICON);
901 mci_con |= S3C2410_SDICON_FIFORESET;
902
903 writel(mci_con, host->base + S3C2410_SDICON);
904 }
905 }
906
907request_done:
908 host->complete_what = COMPLETION_NONE;
909 host->mrq = NULL;
910
911 s3cmci_check_sdio_irq(host);
912 mmc_request_done(host->mmc, mrq);
913}
914
915static void s3cmci_dma_setup(struct s3cmci_host *host,
916 enum dma_data_direction source)
917{
918 static enum dma_data_direction last_source = -1;
919 static int setup_ok;
920
921 if (last_source == source)
922 return;
923
924 last_source = source;
925
926 s3c2410_dma_devconfig(host->dma, source,
927 host->mem->start + host->sdidata);
928
929 if (!setup_ok) {
930 s3c2410_dma_config(host->dma, 4);
931 s3c2410_dma_set_buffdone_fn(host->dma,
932 s3cmci_dma_done_callback);
933 s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
934 setup_ok = 1;
935 }
936}
937
938static void s3cmci_send_command(struct s3cmci_host *host,
939 struct mmc_command *cmd)
940{
941 u32 ccon, imsk;
942
943 imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT |
944 S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT |
945 S3C2410_SDIIMSK_RESPONSECRC;
946
947 enable_imask(host, imsk);
948
949 if (cmd->data)
950 host->complete_what = COMPLETION_XFERFINISH_RSPFIN;
951 else if (cmd->flags & MMC_RSP_PRESENT)
952 host->complete_what = COMPLETION_RSPFIN;
953 else
954 host->complete_what = COMPLETION_CMDSENT;
955
956 writel(cmd->arg, host->base + S3C2410_SDICMDARG);
957
958 ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX;
959 ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART;
960
961 if (cmd->flags & MMC_RSP_PRESENT)
962 ccon |= S3C2410_SDICMDCON_WAITRSP;
963
964 if (cmd->flags & MMC_RSP_136)
965 ccon |= S3C2410_SDICMDCON_LONGRSP;
966
967 writel(ccon, host->base + S3C2410_SDICMDCON);
968}
969
970static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
971{
972 u32 dcon, imsk, stoptries = 3;
973
974 /* write DCON register */
975
976 if (!data) {
977 writel(0, host->base + S3C2410_SDIDCON);
978 return 0;
979 }
980
981 if ((data->blksz & 3) != 0) {
982 /* We cannot deal with unaligned blocks with more than
983 * one block being transferred. */
984
985 if (data->blocks > 1) {
986 pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz);
987 return -EINVAL;
988 }
989 }
990
991 while (readl(host->base + S3C2410_SDIDSTA) &
992 (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) {
993
994 dbg(host, dbg_err,
995 "mci_setup_data() transfer stillin progress.\n");
996
997 writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
998 s3cmci_reset(host);
999
1000 if ((stoptries--) == 0) {
1001 dbg_dumpregs(host, "DRF");
1002 return -EINVAL;
1003 }
1004 }
1005
1006 dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
1007
1008 if (s3cmci_host_usedma(host))
1009 dcon |= S3C2410_SDIDCON_DMAEN;
1010
1011 if (host->bus_width == MMC_BUS_WIDTH_4)
1012 dcon |= S3C2410_SDIDCON_WIDEBUS;
1013
1014 if (!(data->flags & MMC_DATA_STREAM))
1015 dcon |= S3C2410_SDIDCON_BLOCKMODE;
1016
1017 if (data->flags & MMC_DATA_WRITE) {
1018 dcon |= S3C2410_SDIDCON_TXAFTERRESP;
1019 dcon |= S3C2410_SDIDCON_XFER_TXSTART;
1020 }
1021
1022 if (data->flags & MMC_DATA_READ) {
1023 dcon |= S3C2410_SDIDCON_RXAFTERCMD;
1024 dcon |= S3C2410_SDIDCON_XFER_RXSTART;
1025 }
1026
1027 if (host->is2440) {
1028 dcon |= S3C2440_SDIDCON_DS_WORD;
1029 dcon |= S3C2440_SDIDCON_DATSTART;
1030 }
1031
1032 writel(dcon, host->base + S3C2410_SDIDCON);
1033
1034 /* write BSIZE register */
1035
1036 writel(data->blksz, host->base + S3C2410_SDIBSIZE);
1037
1038 /* add to IMASK register */
1039 imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC |
1040 S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH;
1041
1042 enable_imask(host, imsk);
1043
1044 /* write TIMER register */
1045
1046 if (host->is2440) {
1047 writel(0x007FFFFF, host->base + S3C2410_SDITIMER);
1048 } else {
1049 writel(0x0000FFFF, host->base + S3C2410_SDITIMER);
1050
1051 /* FIX: set slow clock to prevent timeouts on read */
1052 if (data->flags & MMC_DATA_READ)
1053 writel(0xFF, host->base + S3C2410_SDIPRE);
1054 }
1055
1056 return 0;
1057}
1058
1059#define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
1060
1061static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
1062{
1063 int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
1064
1065 BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
1066
1067 host->pio_sgptr = 0;
1068 host->pio_bytes = 0;
1069 host->pio_count = 0;
1070 host->pio_active = rw ? XFER_WRITE : XFER_READ;
1071
1072 if (rw) {
1073 do_pio_write(host);
1074 enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
1075 } else {
1076 enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF
1077 | S3C2410_SDIIMSK_RXFIFOLAST);
1078 }
1079
1080 return 0;
1081}
1082
1083static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
1084{
1085 int dma_len, i;
1086 int rw = data->flags & MMC_DATA_WRITE;
1087
1088 BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
1089
1090 s3cmci_dma_setup(host, rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
1091 s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
1092
1093 dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
1094 rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
1095
1096 if (dma_len == 0)
1097 return -ENOMEM;
1098
1099 host->dma_complete = 0;
1100 host->dmatogo = dma_len;
1101
1102 for (i = 0; i < dma_len; i++) {
1103 int res;
1104
1105 dbg(host, dbg_dma, "enqueue %i: %08x@%u\n", i,
1106 sg_dma_address(&data->sg[i]),
1107 sg_dma_len(&data->sg[i]));
1108
1109 res = s3c2410_dma_enqueue(host->dma, host,
1110 sg_dma_address(&data->sg[i]),
1111 sg_dma_len(&data->sg[i]));
1112
1113 if (res) {
1114 s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
1115 return -EBUSY;
1116 }
1117 }
1118
1119 s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START);
1120
1121 return 0;
1122}
1123
1124static void s3cmci_send_request(struct mmc_host *mmc)
1125{
1126 struct s3cmci_host *host = mmc_priv(mmc);
1127 struct mmc_request *mrq = host->mrq;
1128 struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
1129
1130 host->ccnt++;
1131 prepare_dbgmsg(host, cmd, host->cmd_is_stop);
1132
1133 /* Clear command, data and fifo status registers
1134 Fifo clear only necessary on 2440, but doesn't hurt on 2410
1135 */
1136 writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT);
1137 writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA);
1138 writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA);
1139
1140 if (cmd->data) {
1141 int res = s3cmci_setup_data(host, cmd->data);
1142
1143 host->dcnt++;
1144
1145 if (res) {
1146 dbg(host, dbg_err, "setup data error %d\n", res);
1147 cmd->error = res;
1148 cmd->data->error = res;
1149
1150 mmc_request_done(mmc, mrq);
1151 return;
1152 }
1153
1154 if (s3cmci_host_usedma(host))
1155 res = s3cmci_prepare_dma(host, cmd->data);
1156 else
1157 res = s3cmci_prepare_pio(host, cmd->data);
1158
1159 if (res) {
1160 dbg(host, dbg_err, "data prepare error %d\n", res);
1161 cmd->error = res;
1162 cmd->data->error = res;
1163
1164 mmc_request_done(mmc, mrq);
1165 return;
1166 }
1167 }
1168
1169 /* Send command */
1170 s3cmci_send_command(host, cmd);
1171
1172 /* Enable Interrupt */
1173 s3cmci_enable_irq(host, true);
1174}
1175
1176static int s3cmci_card_present(struct mmc_host *mmc)
1177{
1178 struct s3cmci_host *host = mmc_priv(mmc);
1179 struct s3c24xx_mci_pdata *pdata = host->pdata;
1180 int ret;
1181
1182 if (pdata->no_detect)
1183 return -ENOSYS;
1184
1185 ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1;
1186 return ret ^ pdata->detect_invert;
1187}
1188
1189static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1190{
1191 struct s3cmci_host *host = mmc_priv(mmc);
1192
1193 host->status = "mmc request";
1194 host->cmd_is_stop = 0;
1195 host->mrq = mrq;
1196
1197 if (s3cmci_card_present(mmc) == 0) {
1198 dbg(host, dbg_err, "%s: no medium present\n", __func__);
1199 host->mrq->cmd->error = -ENOMEDIUM;
1200 mmc_request_done(mmc, mrq);
1201 } else
1202 s3cmci_send_request(mmc);
1203}
1204
1205static void s3cmci_set_clk(struct s3cmci_host *host, struct mmc_ios *ios)
1206{
1207 u32 mci_psc;
1208
1209 /* Set clock */
1210 for (mci_psc = 0; mci_psc < 255; mci_psc++) {
1211 host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1));
1212
1213 if (host->real_rate <= ios->clock)
1214 break;
1215 }
1216
1217 if (mci_psc > 255)
1218 mci_psc = 255;
1219
1220 host->prescaler = mci_psc;
1221 writel(host->prescaler, host->base + S3C2410_SDIPRE);
1222
1223 /* If requested clock is 0, real_rate will be 0, too */
1224 if (ios->clock == 0)
1225 host->real_rate = 0;
1226}
1227
1228static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1229{
1230 struct s3cmci_host *host = mmc_priv(mmc);
1231 u32 mci_con;
1232
1233 /* Set the power state */
1234
1235 mci_con = readl(host->base + S3C2410_SDICON);
1236
1237 switch (ios->power_mode) {
1238 case MMC_POWER_ON:
1239 case MMC_POWER_UP:
1240 s3c2410_gpio_cfgpin(S3C2410_GPE(5), S3C2410_GPE5_SDCLK);
1241 s3c2410_gpio_cfgpin(S3C2410_GPE(6), S3C2410_GPE6_SDCMD);
1242 s3c2410_gpio_cfgpin(S3C2410_GPE(7), S3C2410_GPE7_SDDAT0);
1243 s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
1244 s3c2410_gpio_cfgpin(S3C2410_GPE(9), S3C2410_GPE9_SDDAT2);
1245 s3c2410_gpio_cfgpin(S3C2410_GPE(10), S3C2410_GPE10_SDDAT3);
1246
1247 if (host->pdata->set_power)
1248 host->pdata->set_power(ios->power_mode, ios->vdd);
1249
1250 if (!host->is2440)
1251 mci_con |= S3C2410_SDICON_FIFORESET;
1252
1253 break;
1254
1255 case MMC_POWER_OFF:
1256 default:
1257 gpio_direction_output(S3C2410_GPE(5), 0);
1258
1259 if (host->is2440)
1260 mci_con |= S3C2440_SDICON_SDRESET;
1261
1262 if (host->pdata->set_power)
1263 host->pdata->set_power(ios->power_mode, ios->vdd);
1264
1265 break;
1266 }
1267
1268 s3cmci_set_clk(host, ios);
1269
1270 /* Set CLOCK_ENABLE */
1271 if (ios->clock)
1272 mci_con |= S3C2410_SDICON_CLOCKTYPE;
1273 else
1274 mci_con &= ~S3C2410_SDICON_CLOCKTYPE;
1275
1276 writel(mci_con, host->base + S3C2410_SDICON);
1277
1278 if ((ios->power_mode == MMC_POWER_ON) ||
1279 (ios->power_mode == MMC_POWER_UP)) {
1280 dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n",
1281 host->real_rate/1000, ios->clock/1000);
1282 } else {
1283 dbg(host, dbg_conf, "powered down.\n");
1284 }
1285
1286 host->bus_width = ios->bus_width;
1287}
1288
1289static void s3cmci_reset(struct s3cmci_host *host)
1290{
1291 u32 con = readl(host->base + S3C2410_SDICON);
1292
1293 con |= S3C2440_SDICON_SDRESET;
1294 writel(con, host->base + S3C2410_SDICON);
1295}
1296
1297static int s3cmci_get_ro(struct mmc_host *mmc)
1298{
1299 struct s3cmci_host *host = mmc_priv(mmc);
1300 struct s3c24xx_mci_pdata *pdata = host->pdata;
1301 int ret;
1302
1303 if (pdata->no_wprotect)
1304 return 0;
1305
1306 ret = gpio_get_value(pdata->gpio_wprotect) ? 1 : 0;
1307 ret ^= pdata->wprotect_invert;
1308
1309 return ret;
1310}
1311
1312static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1313{
1314 struct s3cmci_host *host = mmc_priv(mmc);
1315 unsigned long flags;
1316 u32 con;
1317
1318 local_irq_save(flags);
1319
1320 con = readl(host->base + S3C2410_SDICON);
1321 host->sdio_irqen = enable;
1322
1323 if (enable == host->sdio_irqen)
1324 goto same_state;
1325
1326 if (enable) {
1327 con |= S3C2410_SDICON_SDIOIRQ;
1328 enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
1329
1330 if (!host->irq_state && !host->irq_disabled) {
1331 host->irq_state = true;
1332 enable_irq(host->irq);
1333 }
1334 } else {
1335 disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
1336 con &= ~S3C2410_SDICON_SDIOIRQ;
1337
1338 if (!host->irq_enabled && host->irq_state) {
1339 disable_irq_nosync(host->irq);
1340 host->irq_state = false;
1341 }
1342 }
1343
1344 writel(con, host->base + S3C2410_SDICON);
1345
1346 same_state:
1347 local_irq_restore(flags);
1348
1349 s3cmci_check_sdio_irq(host);
1350}
1351
1352static struct mmc_host_ops s3cmci_ops = {
1353 .request = s3cmci_request,
1354 .set_ios = s3cmci_set_ios,
1355 .get_ro = s3cmci_get_ro,
1356 .get_cd = s3cmci_card_present,
1357 .enable_sdio_irq = s3cmci_enable_sdio_irq,
1358};
1359
1360static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
1361 /* This is currently here to avoid a number of if (host->pdata)
1362 * checks. Any zero fields to ensure reasonable defaults are picked. */
1363 .no_wprotect = 1,
1364 .no_detect = 1,
1365};
1366
1367#ifdef CONFIG_CPU_FREQ
1368
1369static int s3cmci_cpufreq_transition(struct notifier_block *nb,
1370 unsigned long val, void *data)
1371{
1372 struct s3cmci_host *host;
1373 struct mmc_host *mmc;
1374 unsigned long newclk;
1375 unsigned long flags;
1376
1377 host = container_of(nb, struct s3cmci_host, freq_transition);
1378 newclk = clk_get_rate(host->clk);
1379 mmc = host->mmc;
1380
1381 if ((val == CPUFREQ_PRECHANGE && newclk > host->clk_rate) ||
1382 (val == CPUFREQ_POSTCHANGE && newclk < host->clk_rate)) {
1383 spin_lock_irqsave(&mmc->lock, flags);
1384
1385 host->clk_rate = newclk;
1386
1387 if (mmc->ios.power_mode != MMC_POWER_OFF &&
1388 mmc->ios.clock != 0)
1389 s3cmci_set_clk(host, &mmc->ios);
1390
1391 spin_unlock_irqrestore(&mmc->lock, flags);
1392 }
1393
1394 return 0;
1395}
1396
1397static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
1398{
1399 host->freq_transition.notifier_call = s3cmci_cpufreq_transition;
1400
1401 return cpufreq_register_notifier(&host->freq_transition,
1402 CPUFREQ_TRANSITION_NOTIFIER);
1403}
1404
1405static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
1406{
1407 cpufreq_unregister_notifier(&host->freq_transition,
1408 CPUFREQ_TRANSITION_NOTIFIER);
1409}
1410
1411#else
1412static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
1413{
1414 return 0;
1415}
1416
1417static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
1418{
1419}
1420#endif
1421
1422
1423#ifdef CONFIG_DEBUG_FS
1424
1425static int s3cmci_state_show(struct seq_file *seq, void *v)
1426{
1427 struct s3cmci_host *host = seq->private;
1428
1429 seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base);
1430 seq_printf(seq, "Clock rate = %ld\n", host->clk_rate);
1431 seq_printf(seq, "Prescale = %d\n", host->prescaler);
1432 seq_printf(seq, "is2440 = %d\n", host->is2440);
1433 seq_printf(seq, "IRQ = %d\n", host->irq);
1434 seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled);
1435 seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled);
1436 seq_printf(seq, "IRQ state = %d\n", host->irq_state);
1437 seq_printf(seq, "CD IRQ = %d\n", host->irq_cd);
1438 seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host));
1439 seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk);
1440 seq_printf(seq, "SDIDATA at %d\n", host->sdidata);
1441
1442 return 0;
1443}
1444
1445static int s3cmci_state_open(struct inode *inode, struct file *file)
1446{
1447 return single_open(file, s3cmci_state_show, inode->i_private);
1448}
1449
1450static const struct file_operations s3cmci_fops_state = {
1451 .owner = THIS_MODULE,
1452 .open = s3cmci_state_open,
1453 .read = seq_read,
1454 .llseek = seq_lseek,
1455 .release = single_release,
1456};
1457
1458#define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r }
1459
1460struct s3cmci_reg {
1461 unsigned short addr;
1462 unsigned char *name;
1463} debug_regs[] = {
1464 DBG_REG(CON),
1465 DBG_REG(PRE),
1466 DBG_REG(CMDARG),
1467 DBG_REG(CMDCON),
1468 DBG_REG(CMDSTAT),
1469 DBG_REG(RSP0),
1470 DBG_REG(RSP1),
1471 DBG_REG(RSP2),
1472 DBG_REG(RSP3),
1473 DBG_REG(TIMER),
1474 DBG_REG(BSIZE),
1475 DBG_REG(DCON),
1476 DBG_REG(DCNT),
1477 DBG_REG(DSTA),
1478 DBG_REG(FSTA),
1479 {}
1480};
1481
1482static int s3cmci_regs_show(struct seq_file *seq, void *v)
1483{
1484 struct s3cmci_host *host = seq->private;
1485 struct s3cmci_reg *rptr = debug_regs;
1486
1487 for (; rptr->name; rptr++)
1488 seq_printf(seq, "SDI%s\t=0x%08x\n", rptr->name,
1489 readl(host->base + rptr->addr));
1490
1491 seq_printf(seq, "SDIIMSK\t=0x%08x\n", readl(host->base + host->sdiimsk));
1492
1493 return 0;
1494}
1495
1496static int s3cmci_regs_open(struct inode *inode, struct file *file)
1497{
1498 return single_open(file, s3cmci_regs_show, inode->i_private);
1499}
1500
1501static const struct file_operations s3cmci_fops_regs = {
1502 .owner = THIS_MODULE,
1503 .open = s3cmci_regs_open,
1504 .read = seq_read,
1505 .llseek = seq_lseek,
1506 .release = single_release,
1507};
1508
1509static void s3cmci_debugfs_attach(struct s3cmci_host *host)
1510{
1511 struct device *dev = &host->pdev->dev;
1512
1513 host->debug_root = debugfs_create_dir(dev_name(dev), NULL);
1514 if (IS_ERR(host->debug_root)) {
1515 dev_err(dev, "failed to create debugfs root\n");
1516 return;
1517 }
1518
1519 host->debug_state = debugfs_create_file("state", 0444,
1520 host->debug_root, host,
1521 &s3cmci_fops_state);
1522
1523 if (IS_ERR(host->debug_state))
1524 dev_err(dev, "failed to create debug state file\n");
1525
1526 host->debug_regs = debugfs_create_file("regs", 0444,
1527 host->debug_root, host,
1528 &s3cmci_fops_regs);
1529
1530 if (IS_ERR(host->debug_regs))
1531 dev_err(dev, "failed to create debug regs file\n");
1532}
1533
1534static void s3cmci_debugfs_remove(struct s3cmci_host *host)
1535{
1536 debugfs_remove(host->debug_regs);
1537 debugfs_remove(host->debug_state);
1538 debugfs_remove(host->debug_root);
1539}
1540
1541#else
1542static inline void s3cmci_debugfs_attach(struct s3cmci_host *host) { }
1543static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
1544
1545#endif /* CONFIG_DEBUG_FS */
1546
1547static int __devinit s3cmci_probe(struct platform_device *pdev)
1548{
1549 struct s3cmci_host *host;
1550 struct mmc_host *mmc;
1551 int ret;
1552 int is2440;
1553 int i;
1554
1555 is2440 = platform_get_device_id(pdev)->driver_data;
1556
1557 mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
1558 if (!mmc) {
1559 ret = -ENOMEM;
1560 goto probe_out;
1561 }
1562
1563 for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
1564 ret = gpio_request(i, dev_name(&pdev->dev));
1565 if (ret) {
1566 dev_err(&pdev->dev, "failed to get gpio %d\n", i);
1567
1568 for (i--; i >= S3C2410_GPE(5); i--)
1569 gpio_free(i);
1570
1571 goto probe_free_host;
1572 }
1573 }
1574
1575 host = mmc_priv(mmc);
1576 host->mmc = mmc;
1577 host->pdev = pdev;
1578 host->is2440 = is2440;
1579
1580 host->pdata = pdev->dev.platform_data;
1581 if (!host->pdata) {
1582 pdev->dev.platform_data = &s3cmci_def_pdata;
1583 host->pdata = &s3cmci_def_pdata;
1584 }
1585
1586 spin_lock_init(&host->complete_lock);
1587 tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
1588
1589 if (is2440) {
1590 host->sdiimsk = S3C2440_SDIIMSK;
1591 host->sdidata = S3C2440_SDIDATA;
1592 host->clk_div = 1;
1593 } else {
1594 host->sdiimsk = S3C2410_SDIIMSK;
1595 host->sdidata = S3C2410_SDIDATA;
1596 host->clk_div = 2;
1597 }
1598
1599 host->complete_what = COMPLETION_NONE;
1600 host->pio_active = XFER_NONE;
1601
1602#ifdef CONFIG_MMC_S3C_PIODMA
1603 host->dodma = host->pdata->use_dma;
1604#endif
1605
1606 host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1607 if (!host->mem) {
1608 dev_err(&pdev->dev,
1609 "failed to get io memory region resource.\n");
1610
1611 ret = -ENOENT;
1612 goto probe_free_gpio;
1613 }
1614
1615 host->mem = request_mem_region(host->mem->start,
1616 resource_size(host->mem), pdev->name);
1617
1618 if (!host->mem) {
1619 dev_err(&pdev->dev, "failed to request io memory region.\n");
1620 ret = -ENOENT;
1621 goto probe_free_gpio;
1622 }
1623
1624 host->base = ioremap(host->mem->start, resource_size(host->mem));
1625 if (!host->base) {
1626 dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
1627 ret = -EINVAL;
1628 goto probe_free_mem_region;
1629 }
1630
1631 host->irq = platform_get_irq(pdev, 0);
1632 if (host->irq == 0) {
1633 dev_err(&pdev->dev, "failed to get interrupt resource.\n");
1634 ret = -EINVAL;
1635 goto probe_iounmap;
1636 }
1637
1638 if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) {
1639 dev_err(&pdev->dev, "failed to request mci interrupt.\n");
1640 ret = -ENOENT;
1641 goto probe_iounmap;
1642 }
1643
1644 /* We get spurious interrupts even when we have set the IMSK
1645 * register to ignore everything, so use disable_irq() to make
1646 * ensure we don't lock the system with un-serviceable requests. */
1647
1648 disable_irq(host->irq);
1649 host->irq_state = false;
1650
1651 if (!host->pdata->no_detect) {
1652 ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect");
1653 if (ret) {
1654 dev_err(&pdev->dev, "failed to get detect gpio\n");
1655 goto probe_free_irq;
1656 }
1657
1658 host->irq_cd = gpio_to_irq(host->pdata->gpio_detect);
1659
1660 if (host->irq_cd >= 0) {
1661 if (request_irq(host->irq_cd, s3cmci_irq_cd,
1662 IRQF_TRIGGER_RISING |
1663 IRQF_TRIGGER_FALLING,
1664 DRIVER_NAME, host)) {
1665 dev_err(&pdev->dev,
1666 "can't get card detect irq.\n");
1667 ret = -ENOENT;
1668 goto probe_free_gpio_cd;
1669 }
1670 } else {
1671 dev_warn(&pdev->dev,
1672 "host detect has no irq available\n");
1673 gpio_direction_input(host->pdata->gpio_detect);
1674 }
1675 } else
1676 host->irq_cd = -1;
1677
1678 if (!host->pdata->no_wprotect) {
1679 ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp");
1680 if (ret) {
1681 dev_err(&pdev->dev, "failed to get writeprotect\n");
1682 goto probe_free_irq_cd;
1683 }
1684
1685 gpio_direction_input(host->pdata->gpio_wprotect);
1686 }
1687
1688 /* depending on the dma state, get a dma channel to use. */
1689
1690 if (s3cmci_host_usedma(host)) {
1691 host->dma = s3c2410_dma_request(DMACH_SDI, &s3cmci_dma_client,
1692 host);
1693 if (host->dma < 0) {
1694 dev_err(&pdev->dev, "cannot get DMA channel.\n");
1695 if (!s3cmci_host_canpio()) {
1696 ret = -EBUSY;
1697 goto probe_free_gpio_wp;
1698 } else {
1699 dev_warn(&pdev->dev, "falling back to PIO.\n");
1700 host->dodma = 0;
1701 }
1702 }
1703 }
1704
1705 host->clk = clk_get(&pdev->dev, "sdi");
1706 if (IS_ERR(host->clk)) {
1707 dev_err(&pdev->dev, "failed to find clock source.\n");
1708 ret = PTR_ERR(host->clk);
1709 host->clk = NULL;
1710 goto probe_free_dma;
1711 }
1712
1713 ret = clk_enable(host->clk);
1714 if (ret) {
1715 dev_err(&pdev->dev, "failed to enable clock source.\n");
1716 goto clk_free;
1717 }
1718
1719 host->clk_rate = clk_get_rate(host->clk);
1720
1721 mmc->ops = &s3cmci_ops;
1722 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
1723#ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ
1724 mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
1725#else
1726 mmc->caps = MMC_CAP_4_BIT_DATA;
1727#endif
1728 mmc->f_min = host->clk_rate / (host->clk_div * 256);
1729 mmc->f_max = host->clk_rate / host->clk_div;
1730
1731 if (host->pdata->ocr_avail)
1732 mmc->ocr_avail = host->pdata->ocr_avail;
1733
1734 mmc->max_blk_count = 4095;
1735 mmc->max_blk_size = 4095;
1736 mmc->max_req_size = 4095 * 512;
1737 mmc->max_seg_size = mmc->max_req_size;
1738
1739 mmc->max_segs = 128;
1740
1741 dbg(host, dbg_debug,
1742 "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n",
1743 (host->is2440?"2440":""),
1744 host->base, host->irq, host->irq_cd, host->dma);
1745
1746 ret = s3cmci_cpufreq_register(host);
1747 if (ret) {
1748 dev_err(&pdev->dev, "failed to register cpufreq\n");
1749 goto free_dmabuf;
1750 }
1751
1752 ret = mmc_add_host(mmc);
1753 if (ret) {
1754 dev_err(&pdev->dev, "failed to add mmc host.\n");
1755 goto free_cpufreq;
1756 }
1757
1758 s3cmci_debugfs_attach(host);
1759
1760 platform_set_drvdata(pdev, mmc);
1761 dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc),
1762 s3cmci_host_usedma(host) ? "dma" : "pio",
1763 mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw");
1764
1765 return 0;
1766
1767 free_cpufreq:
1768 s3cmci_cpufreq_deregister(host);
1769
1770 free_dmabuf:
1771 clk_disable(host->clk);
1772
1773 clk_free:
1774 clk_put(host->clk);
1775
1776 probe_free_dma:
1777 if (s3cmci_host_usedma(host))
1778 s3c2410_dma_free(host->dma, &s3cmci_dma_client);
1779
1780 probe_free_gpio_wp:
1781 if (!host->pdata->no_wprotect)
1782 gpio_free(host->pdata->gpio_wprotect);
1783
1784 probe_free_gpio_cd:
1785 if (!host->pdata->no_detect)
1786 gpio_free(host->pdata->gpio_detect);
1787
1788 probe_free_irq_cd:
1789 if (host->irq_cd >= 0)
1790 free_irq(host->irq_cd, host);
1791
1792 probe_free_irq:
1793 free_irq(host->irq, host);
1794
1795 probe_iounmap:
1796 iounmap(host->base);
1797
1798 probe_free_mem_region:
1799 release_mem_region(host->mem->start, resource_size(host->mem));
1800
1801 probe_free_gpio:
1802 for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
1803 gpio_free(i);
1804
1805 probe_free_host:
1806 mmc_free_host(mmc);
1807
1808 probe_out:
1809 return ret;
1810}
1811
1812static void s3cmci_shutdown(struct platform_device *pdev)
1813{
1814 struct mmc_host *mmc = platform_get_drvdata(pdev);
1815 struct s3cmci_host *host = mmc_priv(mmc);
1816
1817 if (host->irq_cd >= 0)
1818 free_irq(host->irq_cd, host);
1819
1820 s3cmci_debugfs_remove(host);
1821 s3cmci_cpufreq_deregister(host);
1822 mmc_remove_host(mmc);
1823 clk_disable(host->clk);
1824}
1825
1826static int __devexit s3cmci_remove(struct platform_device *pdev)
1827{
1828 struct mmc_host *mmc = platform_get_drvdata(pdev);
1829 struct s3cmci_host *host = mmc_priv(mmc);
1830 struct s3c24xx_mci_pdata *pd = host->pdata;
1831 int i;
1832
1833 s3cmci_shutdown(pdev);
1834
1835 clk_put(host->clk);
1836
1837 tasklet_disable(&host->pio_tasklet);
1838
1839 if (s3cmci_host_usedma(host))
1840 s3c2410_dma_free(host->dma, &s3cmci_dma_client);
1841
1842 free_irq(host->irq, host);
1843
1844 if (!pd->no_wprotect)
1845 gpio_free(pd->gpio_wprotect);
1846
1847 if (!pd->no_detect)
1848 gpio_free(pd->gpio_detect);
1849
1850 for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
1851 gpio_free(i);
1852
1853
1854 iounmap(host->base);
1855 release_mem_region(host->mem->start, resource_size(host->mem));
1856
1857 mmc_free_host(mmc);
1858 return 0;
1859}
1860
1861static struct platform_device_id s3cmci_driver_ids[] = {
1862 {
1863 .name = "s3c2410-sdi",
1864 .driver_data = 0,
1865 }, {
1866 .name = "s3c2412-sdi",
1867 .driver_data = 1,
1868 }, {
1869 .name = "s3c2440-sdi",
1870 .driver_data = 1,
1871 },
1872 { }
1873};
1874
1875MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids);
1876
1877
1878#ifdef CONFIG_PM
1879
1880static int s3cmci_suspend(struct device *dev)
1881{
1882 struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
1883
1884 return mmc_suspend_host(mmc);
1885}
1886
1887static int s3cmci_resume(struct device *dev)
1888{
1889 struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
1890
1891 return mmc_resume_host(mmc);
1892}
1893
1894static const struct dev_pm_ops s3cmci_pm = {
1895 .suspend = s3cmci_suspend,
1896 .resume = s3cmci_resume,
1897};
1898
1899#define s3cmci_pm_ops &s3cmci_pm
1900#else /* CONFIG_PM */
1901#define s3cmci_pm_ops NULL
1902#endif /* CONFIG_PM */
1903
1904
1905static struct platform_driver s3cmci_driver = {
1906 .driver = {
1907 .name = "s3c-sdi",
1908 .owner = THIS_MODULE,
1909 .pm = s3cmci_pm_ops,
1910 },
1911 .id_table = s3cmci_driver_ids,
1912 .probe = s3cmci_probe,
1913 .remove = __devexit_p(s3cmci_remove),
1914 .shutdown = s3cmci_shutdown,
1915};
1916
1917module_platform_driver(s3cmci_driver);
1918
1919MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
1920MODULE_LICENSE("GPL v2");
1921MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");
1/*
2 * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
3 *
4 * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
5 *
6 * Current driver maintained by Ben Dooks and Simtec Electronics
7 * Copyright (C) 2008 Simtec Electronics <ben-linux@fluff.org>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#include <linux/module.h>
15#include <linux/dmaengine.h>
16#include <linux/dma-mapping.h>
17#include <linux/clk.h>
18#include <linux/mmc/host.h>
19#include <linux/platform_device.h>
20#include <linux/cpufreq.h>
21#include <linux/debugfs.h>
22#include <linux/seq_file.h>
23#include <linux/gpio.h>
24#include <linux/interrupt.h>
25#include <linux/irq.h>
26#include <linux/io.h>
27#include <linux/of.h>
28#include <linux/of_device.h>
29#include <linux/of_gpio.h>
30#include <linux/mmc/slot-gpio.h>
31
32#include <plat/gpio-cfg.h>
33#include <mach/dma.h>
34#include <mach/gpio-samsung.h>
35
36#include <linux/platform_data/mmc-s3cmci.h>
37
38#include "s3cmci.h"
39
40#define DRIVER_NAME "s3c-mci"
41
42#define S3C2410_SDICON (0x00)
43#define S3C2410_SDIPRE (0x04)
44#define S3C2410_SDICMDARG (0x08)
45#define S3C2410_SDICMDCON (0x0C)
46#define S3C2410_SDICMDSTAT (0x10)
47#define S3C2410_SDIRSP0 (0x14)
48#define S3C2410_SDIRSP1 (0x18)
49#define S3C2410_SDIRSP2 (0x1C)
50#define S3C2410_SDIRSP3 (0x20)
51#define S3C2410_SDITIMER (0x24)
52#define S3C2410_SDIBSIZE (0x28)
53#define S3C2410_SDIDCON (0x2C)
54#define S3C2410_SDIDCNT (0x30)
55#define S3C2410_SDIDSTA (0x34)
56#define S3C2410_SDIFSTA (0x38)
57
58#define S3C2410_SDIDATA (0x3C)
59#define S3C2410_SDIIMSK (0x40)
60
61#define S3C2440_SDIDATA (0x40)
62#define S3C2440_SDIIMSK (0x3C)
63
64#define S3C2440_SDICON_SDRESET (1 << 8)
65#define S3C2410_SDICON_SDIOIRQ (1 << 3)
66#define S3C2410_SDICON_FIFORESET (1 << 1)
67#define S3C2410_SDICON_CLOCKTYPE (1 << 0)
68
69#define S3C2410_SDICMDCON_LONGRSP (1 << 10)
70#define S3C2410_SDICMDCON_WAITRSP (1 << 9)
71#define S3C2410_SDICMDCON_CMDSTART (1 << 8)
72#define S3C2410_SDICMDCON_SENDERHOST (1 << 6)
73#define S3C2410_SDICMDCON_INDEX (0x3f)
74
75#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12)
76#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11)
77#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10)
78#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9)
79
80#define S3C2440_SDIDCON_DS_WORD (2 << 22)
81#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20)
82#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19)
83#define S3C2410_SDIDCON_BLOCKMODE (1 << 17)
84#define S3C2410_SDIDCON_WIDEBUS (1 << 16)
85#define S3C2410_SDIDCON_DMAEN (1 << 15)
86#define S3C2410_SDIDCON_STOP (1 << 14)
87#define S3C2440_SDIDCON_DATSTART (1 << 14)
88
89#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12)
90#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12)
91
92#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
93
94#define S3C2410_SDIDSTA_SDIOIRQDETECT (1 << 9)
95#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8)
96#define S3C2410_SDIDSTA_CRCFAIL (1 << 7)
97#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6)
98#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5)
99#define S3C2410_SDIDSTA_XFERFINISH (1 << 4)
100#define S3C2410_SDIDSTA_TXDATAON (1 << 1)
101#define S3C2410_SDIDSTA_RXDATAON (1 << 0)
102
103#define S3C2440_SDIFSTA_FIFORESET (1 << 16)
104#define S3C2440_SDIFSTA_FIFOFAIL (3 << 14)
105#define S3C2410_SDIFSTA_TFDET (1 << 13)
106#define S3C2410_SDIFSTA_RFDET (1 << 12)
107#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
108
109#define S3C2410_SDIIMSK_RESPONSECRC (1 << 17)
110#define S3C2410_SDIIMSK_CMDSENT (1 << 16)
111#define S3C2410_SDIIMSK_CMDTIMEOUT (1 << 15)
112#define S3C2410_SDIIMSK_RESPONSEND (1 << 14)
113#define S3C2410_SDIIMSK_SDIOIRQ (1 << 12)
114#define S3C2410_SDIIMSK_FIFOFAIL (1 << 11)
115#define S3C2410_SDIIMSK_CRCSTATUS (1 << 10)
116#define S3C2410_SDIIMSK_DATACRC (1 << 9)
117#define S3C2410_SDIIMSK_DATATIMEOUT (1 << 8)
118#define S3C2410_SDIIMSK_DATAFINISH (1 << 7)
119#define S3C2410_SDIIMSK_TXFIFOHALF (1 << 4)
120#define S3C2410_SDIIMSK_RXFIFOLAST (1 << 2)
121#define S3C2410_SDIIMSK_RXFIFOHALF (1 << 0)
122
123enum dbg_channels {
124 dbg_err = (1 << 0),
125 dbg_debug = (1 << 1),
126 dbg_info = (1 << 2),
127 dbg_irq = (1 << 3),
128 dbg_sg = (1 << 4),
129 dbg_dma = (1 << 5),
130 dbg_pio = (1 << 6),
131 dbg_fail = (1 << 7),
132 dbg_conf = (1 << 8),
133};
134
135static const int dbgmap_err = dbg_fail;
136static const int dbgmap_info = dbg_info | dbg_conf;
137static const int dbgmap_debug = dbg_err | dbg_debug;
138
139#define dbg(host, channels, args...) \
140 do { \
141 if (dbgmap_err & channels) \
142 dev_err(&host->pdev->dev, args); \
143 else if (dbgmap_info & channels) \
144 dev_info(&host->pdev->dev, args); \
145 else if (dbgmap_debug & channels) \
146 dev_dbg(&host->pdev->dev, args); \
147 } while (0)
148
149static void finalize_request(struct s3cmci_host *host);
150static void s3cmci_send_request(struct mmc_host *mmc);
151static void s3cmci_reset(struct s3cmci_host *host);
152
153#ifdef CONFIG_MMC_DEBUG
154
155static void dbg_dumpregs(struct s3cmci_host *host, char *prefix)
156{
157 u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize;
158 u32 datcon, datcnt, datsta, fsta, imask;
159
160 con = readl(host->base + S3C2410_SDICON);
161 pre = readl(host->base + S3C2410_SDIPRE);
162 cmdarg = readl(host->base + S3C2410_SDICMDARG);
163 cmdcon = readl(host->base + S3C2410_SDICMDCON);
164 cmdsta = readl(host->base + S3C2410_SDICMDSTAT);
165 r0 = readl(host->base + S3C2410_SDIRSP0);
166 r1 = readl(host->base + S3C2410_SDIRSP1);
167 r2 = readl(host->base + S3C2410_SDIRSP2);
168 r3 = readl(host->base + S3C2410_SDIRSP3);
169 timer = readl(host->base + S3C2410_SDITIMER);
170 bsize = readl(host->base + S3C2410_SDIBSIZE);
171 datcon = readl(host->base + S3C2410_SDIDCON);
172 datcnt = readl(host->base + S3C2410_SDIDCNT);
173 datsta = readl(host->base + S3C2410_SDIDSTA);
174 fsta = readl(host->base + S3C2410_SDIFSTA);
175 imask = readl(host->base + host->sdiimsk);
176
177 dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n",
178 prefix, con, pre, timer);
179
180 dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n",
181 prefix, cmdcon, cmdarg, cmdsta);
182
183 dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]"
184 " DSTA:[%08x] DCNT:[%08x]\n",
185 prefix, datcon, fsta, datsta, datcnt);
186
187 dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]"
188 " R2:[%08x] R3:[%08x]\n",
189 prefix, r0, r1, r2, r3);
190}
191
192static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
193 int stop)
194{
195 snprintf(host->dbgmsg_cmd, 300,
196 "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u",
197 host->ccnt, (stop ? " (STOP)" : ""),
198 cmd->opcode, cmd->arg, cmd->flags, cmd->retries);
199
200 if (cmd->data) {
201 snprintf(host->dbgmsg_dat, 300,
202 "#%u bsize:%u blocks:%u bytes:%u",
203 host->dcnt, cmd->data->blksz,
204 cmd->data->blocks,
205 cmd->data->blocks * cmd->data->blksz);
206 } else {
207 host->dbgmsg_dat[0] = '\0';
208 }
209}
210
211static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd,
212 int fail)
213{
214 unsigned int dbglvl = fail ? dbg_fail : dbg_debug;
215
216 if (!cmd)
217 return;
218
219 if (cmd->error == 0) {
220 dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n",
221 host->dbgmsg_cmd, cmd->resp[0]);
222 } else {
223 dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n",
224 cmd->error, host->dbgmsg_cmd, host->status);
225 }
226
227 if (!cmd->data)
228 return;
229
230 if (cmd->data->error == 0) {
231 dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat);
232 } else {
233 dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n",
234 cmd->data->error, host->dbgmsg_dat,
235 readl(host->base + S3C2410_SDIDCNT));
236 }
237}
238#else
239static void dbg_dumpcmd(struct s3cmci_host *host,
240 struct mmc_command *cmd, int fail) { }
241
242static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
243 int stop) { }
244
245static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { }
246
247#endif /* CONFIG_MMC_DEBUG */
248
249/**
250 * s3cmci_host_usedma - return whether the host is using dma or pio
251 * @host: The host state
252 *
253 * Return true if the host is using DMA to transfer data, else false
254 * to use PIO mode. Will return static data depending on the driver
255 * configuration.
256 */
257static inline bool s3cmci_host_usedma(struct s3cmci_host *host)
258{
259#ifdef CONFIG_MMC_S3C_PIO
260 return false;
261#else /* CONFIG_MMC_S3C_DMA */
262 return true;
263#endif
264}
265
266static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
267{
268 u32 newmask;
269
270 newmask = readl(host->base + host->sdiimsk);
271 newmask |= imask;
272
273 writel(newmask, host->base + host->sdiimsk);
274
275 return newmask;
276}
277
278static inline u32 disable_imask(struct s3cmci_host *host, u32 imask)
279{
280 u32 newmask;
281
282 newmask = readl(host->base + host->sdiimsk);
283 newmask &= ~imask;
284
285 writel(newmask, host->base + host->sdiimsk);
286
287 return newmask;
288}
289
290static inline void clear_imask(struct s3cmci_host *host)
291{
292 u32 mask = readl(host->base + host->sdiimsk);
293
294 /* preserve the SDIO IRQ mask state */
295 mask &= S3C2410_SDIIMSK_SDIOIRQ;
296 writel(mask, host->base + host->sdiimsk);
297}
298
299/**
300 * s3cmci_check_sdio_irq - test whether the SDIO IRQ is being signalled
301 * @host: The host to check.
302 *
303 * Test to see if the SDIO interrupt is being signalled in case the
304 * controller has failed to re-detect a card interrupt. Read GPE8 and
305 * see if it is low and if so, signal a SDIO interrupt.
306 *
307 * This is currently called if a request is finished (we assume that the
308 * bus is now idle) and when the SDIO IRQ is enabled in case the IRQ is
309 * already being indicated.
310*/
311static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
312{
313 if (host->sdio_irqen) {
314 if (gpio_get_value(S3C2410_GPE(8)) == 0) {
315 pr_debug("%s: signalling irq\n", __func__);
316 mmc_signal_sdio_irq(host->mmc);
317 }
318 }
319}
320
321static inline int get_data_buffer(struct s3cmci_host *host,
322 u32 *bytes, u32 **pointer)
323{
324 struct scatterlist *sg;
325
326 if (host->pio_active == XFER_NONE)
327 return -EINVAL;
328
329 if ((!host->mrq) || (!host->mrq->data))
330 return -EINVAL;
331
332 if (host->pio_sgptr >= host->mrq->data->sg_len) {
333 dbg(host, dbg_debug, "no more buffers (%i/%i)\n",
334 host->pio_sgptr, host->mrq->data->sg_len);
335 return -EBUSY;
336 }
337 sg = &host->mrq->data->sg[host->pio_sgptr];
338
339 *bytes = sg->length;
340 *pointer = sg_virt(sg);
341
342 host->pio_sgptr++;
343
344 dbg(host, dbg_sg, "new buffer (%i/%i)\n",
345 host->pio_sgptr, host->mrq->data->sg_len);
346
347 return 0;
348}
349
350static inline u32 fifo_count(struct s3cmci_host *host)
351{
352 u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
353
354 fifostat &= S3C2410_SDIFSTA_COUNTMASK;
355 return fifostat;
356}
357
358static inline u32 fifo_free(struct s3cmci_host *host)
359{
360 u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
361
362 fifostat &= S3C2410_SDIFSTA_COUNTMASK;
363 return 63 - fifostat;
364}
365
366/**
367 * s3cmci_enable_irq - enable IRQ, after having disabled it.
368 * @host: The device state.
369 * @more: True if more IRQs are expected from transfer.
370 *
371 * Enable the main IRQ if needed after it has been disabled.
372 *
373 * The IRQ can be one of the following states:
374 * - disabled during IDLE
375 * - disabled whilst processing data
376 * - enabled during transfer
377 * - enabled whilst awaiting SDIO interrupt detection
378 */
379static void s3cmci_enable_irq(struct s3cmci_host *host, bool more)
380{
381 unsigned long flags;
382 bool enable = false;
383
384 local_irq_save(flags);
385
386 host->irq_enabled = more;
387 host->irq_disabled = false;
388
389 enable = more | host->sdio_irqen;
390
391 if (host->irq_state != enable) {
392 host->irq_state = enable;
393
394 if (enable)
395 enable_irq(host->irq);
396 else
397 disable_irq(host->irq);
398 }
399
400 local_irq_restore(flags);
401}
402
403/**
404 *
405 */
406static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer)
407{
408 unsigned long flags;
409
410 local_irq_save(flags);
411
412 /* pr_debug("%s: transfer %d\n", __func__, transfer); */
413
414 host->irq_disabled = transfer;
415
416 if (transfer && host->irq_state) {
417 host->irq_state = false;
418 disable_irq(host->irq);
419 }
420
421 local_irq_restore(flags);
422}
423
424static void do_pio_read(struct s3cmci_host *host)
425{
426 int res;
427 u32 fifo;
428 u32 *ptr;
429 u32 fifo_words;
430 void __iomem *from_ptr;
431
432 /* write real prescaler to host, it might be set slow to fix */
433 writel(host->prescaler, host->base + S3C2410_SDIPRE);
434
435 from_ptr = host->base + host->sdidata;
436
437 while ((fifo = fifo_count(host))) {
438 if (!host->pio_bytes) {
439 res = get_data_buffer(host, &host->pio_bytes,
440 &host->pio_ptr);
441 if (res) {
442 host->pio_active = XFER_NONE;
443 host->complete_what = COMPLETION_FINALIZE;
444
445 dbg(host, dbg_pio, "pio_read(): "
446 "complete (no more data).\n");
447 return;
448 }
449
450 dbg(host, dbg_pio,
451 "pio_read(): new target: [%i]@[%p]\n",
452 host->pio_bytes, host->pio_ptr);
453 }
454
455 dbg(host, dbg_pio,
456 "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n",
457 fifo, host->pio_bytes,
458 readl(host->base + S3C2410_SDIDCNT));
459
460 /* If we have reached the end of the block, we can
461 * read a word and get 1 to 3 bytes. If we in the
462 * middle of the block, we have to read full words,
463 * otherwise we will write garbage, so round down to
464 * an even multiple of 4. */
465 if (fifo >= host->pio_bytes)
466 fifo = host->pio_bytes;
467 else
468 fifo -= fifo & 3;
469
470 host->pio_bytes -= fifo;
471 host->pio_count += fifo;
472
473 fifo_words = fifo >> 2;
474 ptr = host->pio_ptr;
475 while (fifo_words--)
476 *ptr++ = readl(from_ptr);
477 host->pio_ptr = ptr;
478
479 if (fifo & 3) {
480 u32 n = fifo & 3;
481 u32 data = readl(from_ptr);
482 u8 *p = (u8 *)host->pio_ptr;
483
484 while (n--) {
485 *p++ = data;
486 data >>= 8;
487 }
488 }
489 }
490
491 if (!host->pio_bytes) {
492 res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr);
493 if (res) {
494 dbg(host, dbg_pio,
495 "pio_read(): complete (no more buffers).\n");
496 host->pio_active = XFER_NONE;
497 host->complete_what = COMPLETION_FINALIZE;
498
499 return;
500 }
501 }
502
503 enable_imask(host,
504 S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST);
505}
506
507static void do_pio_write(struct s3cmci_host *host)
508{
509 void __iomem *to_ptr;
510 int res;
511 u32 fifo;
512 u32 *ptr;
513
514 to_ptr = host->base + host->sdidata;
515
516 while ((fifo = fifo_free(host)) > 3) {
517 if (!host->pio_bytes) {
518 res = get_data_buffer(host, &host->pio_bytes,
519 &host->pio_ptr);
520 if (res) {
521 dbg(host, dbg_pio,
522 "pio_write(): complete (no more data).\n");
523 host->pio_active = XFER_NONE;
524
525 return;
526 }
527
528 dbg(host, dbg_pio,
529 "pio_write(): new source: [%i]@[%p]\n",
530 host->pio_bytes, host->pio_ptr);
531
532 }
533
534 /* If we have reached the end of the block, we have to
535 * write exactly the remaining number of bytes. If we
536 * in the middle of the block, we have to write full
537 * words, so round down to an even multiple of 4. */
538 if (fifo >= host->pio_bytes)
539 fifo = host->pio_bytes;
540 else
541 fifo -= fifo & 3;
542
543 host->pio_bytes -= fifo;
544 host->pio_count += fifo;
545
546 fifo = (fifo + 3) >> 2;
547 ptr = host->pio_ptr;
548 while (fifo--)
549 writel(*ptr++, to_ptr);
550 host->pio_ptr = ptr;
551 }
552
553 enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
554}
555
556static void pio_tasklet(unsigned long data)
557{
558 struct s3cmci_host *host = (struct s3cmci_host *) data;
559
560 s3cmci_disable_irq(host, true);
561
562 if (host->pio_active == XFER_WRITE)
563 do_pio_write(host);
564
565 if (host->pio_active == XFER_READ)
566 do_pio_read(host);
567
568 if (host->complete_what == COMPLETION_FINALIZE) {
569 clear_imask(host);
570 if (host->pio_active != XFER_NONE) {
571 dbg(host, dbg_err, "unfinished %s "
572 "- pio_count:[%u] pio_bytes:[%u]\n",
573 (host->pio_active == XFER_READ) ? "read" : "write",
574 host->pio_count, host->pio_bytes);
575
576 if (host->mrq->data)
577 host->mrq->data->error = -EINVAL;
578 }
579
580 s3cmci_enable_irq(host, false);
581 finalize_request(host);
582 } else
583 s3cmci_enable_irq(host, true);
584}
585
586/*
587 * ISR for SDI Interface IRQ
588 * Communication between driver and ISR works as follows:
589 * host->mrq points to current request
590 * host->complete_what Indicates when the request is considered done
591 * COMPLETION_CMDSENT when the command was sent
592 * COMPLETION_RSPFIN when a response was received
593 * COMPLETION_XFERFINISH when the data transfer is finished
594 * COMPLETION_XFERFINISH_RSPFIN both of the above.
595 * host->complete_request is the completion-object the driver waits for
596 *
597 * 1) Driver sets up host->mrq and host->complete_what
598 * 2) Driver prepares the transfer
599 * 3) Driver enables interrupts
600 * 4) Driver starts transfer
601 * 5) Driver waits for host->complete_rquest
602 * 6) ISR checks for request status (errors and success)
603 * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error
604 * 7) ISR completes host->complete_request
605 * 8) ISR disables interrupts
606 * 9) Driver wakes up and takes care of the request
607 *
608 * Note: "->error"-fields are expected to be set to 0 before the request
609 * was issued by mmc.c - therefore they are only set, when an error
610 * contition comes up
611 */
612
613static irqreturn_t s3cmci_irq(int irq, void *dev_id)
614{
615 struct s3cmci_host *host = dev_id;
616 struct mmc_command *cmd;
617 u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
618 u32 mci_cclear = 0, mci_dclear;
619 unsigned long iflags;
620
621 mci_dsta = readl(host->base + S3C2410_SDIDSTA);
622 mci_imsk = readl(host->base + host->sdiimsk);
623
624 if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) {
625 if (mci_imsk & S3C2410_SDIIMSK_SDIOIRQ) {
626 mci_dclear = S3C2410_SDIDSTA_SDIOIRQDETECT;
627 writel(mci_dclear, host->base + S3C2410_SDIDSTA);
628
629 mmc_signal_sdio_irq(host->mmc);
630 return IRQ_HANDLED;
631 }
632 }
633
634 spin_lock_irqsave(&host->complete_lock, iflags);
635
636 mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
637 mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
638 mci_fsta = readl(host->base + S3C2410_SDIFSTA);
639 mci_dclear = 0;
640
641 if ((host->complete_what == COMPLETION_NONE) ||
642 (host->complete_what == COMPLETION_FINALIZE)) {
643 host->status = "nothing to complete";
644 clear_imask(host);
645 goto irq_out;
646 }
647
648 if (!host->mrq) {
649 host->status = "no active mrq";
650 clear_imask(host);
651 goto irq_out;
652 }
653
654 cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd;
655
656 if (!cmd) {
657 host->status = "no active cmd";
658 clear_imask(host);
659 goto irq_out;
660 }
661
662 if (!s3cmci_host_usedma(host)) {
663 if ((host->pio_active == XFER_WRITE) &&
664 (mci_fsta & S3C2410_SDIFSTA_TFDET)) {
665
666 disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
667 tasklet_schedule(&host->pio_tasklet);
668 host->status = "pio tx";
669 }
670
671 if ((host->pio_active == XFER_READ) &&
672 (mci_fsta & S3C2410_SDIFSTA_RFDET)) {
673
674 disable_imask(host,
675 S3C2410_SDIIMSK_RXFIFOHALF |
676 S3C2410_SDIIMSK_RXFIFOLAST);
677
678 tasklet_schedule(&host->pio_tasklet);
679 host->status = "pio rx";
680 }
681 }
682
683 if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
684 dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n");
685 cmd->error = -ETIMEDOUT;
686 host->status = "error: command timeout";
687 goto fail_transfer;
688 }
689
690 if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) {
691 if (host->complete_what == COMPLETION_CMDSENT) {
692 host->status = "ok: command sent";
693 goto close_transfer;
694 }
695
696 mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT;
697 }
698
699 if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) {
700 if (cmd->flags & MMC_RSP_CRC) {
701 if (host->mrq->cmd->flags & MMC_RSP_136) {
702 dbg(host, dbg_irq,
703 "fixup: ignore CRC fail with long rsp\n");
704 } else {
705 /* note, we used to fail the transfer
706 * here, but it seems that this is just
707 * the hardware getting it wrong.
708 *
709 * cmd->error = -EILSEQ;
710 * host->status = "error: bad command crc";
711 * goto fail_transfer;
712 */
713 }
714 }
715
716 mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL;
717 }
718
719 if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) {
720 if (host->complete_what == COMPLETION_RSPFIN) {
721 host->status = "ok: command response received";
722 goto close_transfer;
723 }
724
725 if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
726 host->complete_what = COMPLETION_XFERFINISH;
727
728 mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN;
729 }
730
731 /* errors handled after this point are only relevant
732 when a data transfer is in progress */
733
734 if (!cmd->data)
735 goto clear_status_bits;
736
737 /* Check for FIFO failure */
738 if (host->is2440) {
739 if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) {
740 dbg(host, dbg_err, "FIFO failure\n");
741 host->mrq->data->error = -EILSEQ;
742 host->status = "error: 2440 fifo failure";
743 goto fail_transfer;
744 }
745 } else {
746 if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) {
747 dbg(host, dbg_err, "FIFO failure\n");
748 cmd->data->error = -EILSEQ;
749 host->status = "error: fifo failure";
750 goto fail_transfer;
751 }
752 }
753
754 if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) {
755 dbg(host, dbg_err, "bad data crc (outgoing)\n");
756 cmd->data->error = -EILSEQ;
757 host->status = "error: bad data crc (outgoing)";
758 goto fail_transfer;
759 }
760
761 if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) {
762 dbg(host, dbg_err, "bad data crc (incoming)\n");
763 cmd->data->error = -EILSEQ;
764 host->status = "error: bad data crc (incoming)";
765 goto fail_transfer;
766 }
767
768 if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) {
769 dbg(host, dbg_err, "data timeout\n");
770 cmd->data->error = -ETIMEDOUT;
771 host->status = "error: data timeout";
772 goto fail_transfer;
773 }
774
775 if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) {
776 if (host->complete_what == COMPLETION_XFERFINISH) {
777 host->status = "ok: data transfer completed";
778 goto close_transfer;
779 }
780
781 if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
782 host->complete_what = COMPLETION_RSPFIN;
783
784 mci_dclear |= S3C2410_SDIDSTA_XFERFINISH;
785 }
786
787clear_status_bits:
788 writel(mci_cclear, host->base + S3C2410_SDICMDSTAT);
789 writel(mci_dclear, host->base + S3C2410_SDIDSTA);
790
791 goto irq_out;
792
793fail_transfer:
794 host->pio_active = XFER_NONE;
795
796close_transfer:
797 host->complete_what = COMPLETION_FINALIZE;
798
799 clear_imask(host);
800 tasklet_schedule(&host->pio_tasklet);
801
802 goto irq_out;
803
804irq_out:
805 dbg(host, dbg_irq,
806 "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n",
807 mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status);
808
809 spin_unlock_irqrestore(&host->complete_lock, iflags);
810 return IRQ_HANDLED;
811
812}
813
814static void s3cmci_dma_done_callback(void *arg)
815{
816 struct s3cmci_host *host = arg;
817 unsigned long iflags;
818
819 BUG_ON(!host->mrq);
820 BUG_ON(!host->mrq->data);
821
822 spin_lock_irqsave(&host->complete_lock, iflags);
823
824 dbg(host, dbg_dma, "DMA FINISHED\n");
825
826 host->dma_complete = 1;
827 host->complete_what = COMPLETION_FINALIZE;
828
829 tasklet_schedule(&host->pio_tasklet);
830 spin_unlock_irqrestore(&host->complete_lock, iflags);
831
832}
833
834static void finalize_request(struct s3cmci_host *host)
835{
836 struct mmc_request *mrq = host->mrq;
837 struct mmc_command *cmd;
838 int debug_as_failure = 0;
839
840 if (host->complete_what != COMPLETION_FINALIZE)
841 return;
842
843 if (!mrq)
844 return;
845 cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
846
847 if (cmd->data && (cmd->error == 0) &&
848 (cmd->data->error == 0)) {
849 if (s3cmci_host_usedma(host) && (!host->dma_complete)) {
850 dbg(host, dbg_dma, "DMA Missing (%d)!\n",
851 host->dma_complete);
852 return;
853 }
854 }
855
856 /* Read response from controller. */
857 cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0);
858 cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1);
859 cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2);
860 cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3);
861
862 writel(host->prescaler, host->base + S3C2410_SDIPRE);
863
864 if (cmd->error)
865 debug_as_failure = 1;
866
867 if (cmd->data && cmd->data->error)
868 debug_as_failure = 1;
869
870 dbg_dumpcmd(host, cmd, debug_as_failure);
871
872 /* Cleanup controller */
873 writel(0, host->base + S3C2410_SDICMDARG);
874 writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
875 writel(0, host->base + S3C2410_SDICMDCON);
876 clear_imask(host);
877
878 if (cmd->data && cmd->error)
879 cmd->data->error = cmd->error;
880
881 if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) {
882 host->cmd_is_stop = 1;
883 s3cmci_send_request(host->mmc);
884 return;
885 }
886
887 /* If we have no data transfer we are finished here */
888 if (!mrq->data)
889 goto request_done;
890
891 /* Calculate the amout of bytes transfer if there was no error */
892 if (mrq->data->error == 0) {
893 mrq->data->bytes_xfered =
894 (mrq->data->blocks * mrq->data->blksz);
895 } else {
896 mrq->data->bytes_xfered = 0;
897 }
898
899 /* If we had an error while transferring data we flush the
900 * DMA channel and the fifo to clear out any garbage. */
901 if (mrq->data->error != 0) {
902 if (s3cmci_host_usedma(host))
903 dmaengine_terminate_all(host->dma);
904
905 if (host->is2440) {
906 /* Clear failure register and reset fifo. */
907 writel(S3C2440_SDIFSTA_FIFORESET |
908 S3C2440_SDIFSTA_FIFOFAIL,
909 host->base + S3C2410_SDIFSTA);
910 } else {
911 u32 mci_con;
912
913 /* reset fifo */
914 mci_con = readl(host->base + S3C2410_SDICON);
915 mci_con |= S3C2410_SDICON_FIFORESET;
916
917 writel(mci_con, host->base + S3C2410_SDICON);
918 }
919 }
920
921request_done:
922 host->complete_what = COMPLETION_NONE;
923 host->mrq = NULL;
924
925 s3cmci_check_sdio_irq(host);
926 mmc_request_done(host->mmc, mrq);
927}
928
929static void s3cmci_send_command(struct s3cmci_host *host,
930 struct mmc_command *cmd)
931{
932 u32 ccon, imsk;
933
934 imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT |
935 S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT |
936 S3C2410_SDIIMSK_RESPONSECRC;
937
938 enable_imask(host, imsk);
939
940 if (cmd->data)
941 host->complete_what = COMPLETION_XFERFINISH_RSPFIN;
942 else if (cmd->flags & MMC_RSP_PRESENT)
943 host->complete_what = COMPLETION_RSPFIN;
944 else
945 host->complete_what = COMPLETION_CMDSENT;
946
947 writel(cmd->arg, host->base + S3C2410_SDICMDARG);
948
949 ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX;
950 ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART;
951
952 if (cmd->flags & MMC_RSP_PRESENT)
953 ccon |= S3C2410_SDICMDCON_WAITRSP;
954
955 if (cmd->flags & MMC_RSP_136)
956 ccon |= S3C2410_SDICMDCON_LONGRSP;
957
958 writel(ccon, host->base + S3C2410_SDICMDCON);
959}
960
961static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
962{
963 u32 dcon, imsk, stoptries = 3;
964
965 /* write DCON register */
966
967 if (!data) {
968 writel(0, host->base + S3C2410_SDIDCON);
969 return 0;
970 }
971
972 if ((data->blksz & 3) != 0) {
973 /* We cannot deal with unaligned blocks with more than
974 * one block being transferred. */
975
976 if (data->blocks > 1) {
977 pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n",
978 __func__, data->blksz);
979 return -EINVAL;
980 }
981 }
982
983 while (readl(host->base + S3C2410_SDIDSTA) &
984 (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) {
985
986 dbg(host, dbg_err,
987 "mci_setup_data() transfer stillin progress.\n");
988
989 writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
990 s3cmci_reset(host);
991
992 if ((stoptries--) == 0) {
993 dbg_dumpregs(host, "DRF");
994 return -EINVAL;
995 }
996 }
997
998 dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
999
1000 if (s3cmci_host_usedma(host))
1001 dcon |= S3C2410_SDIDCON_DMAEN;
1002
1003 if (host->bus_width == MMC_BUS_WIDTH_4)
1004 dcon |= S3C2410_SDIDCON_WIDEBUS;
1005
1006 dcon |= S3C2410_SDIDCON_BLOCKMODE;
1007
1008 if (data->flags & MMC_DATA_WRITE) {
1009 dcon |= S3C2410_SDIDCON_TXAFTERRESP;
1010 dcon |= S3C2410_SDIDCON_XFER_TXSTART;
1011 }
1012
1013 if (data->flags & MMC_DATA_READ) {
1014 dcon |= S3C2410_SDIDCON_RXAFTERCMD;
1015 dcon |= S3C2410_SDIDCON_XFER_RXSTART;
1016 }
1017
1018 if (host->is2440) {
1019 dcon |= S3C2440_SDIDCON_DS_WORD;
1020 dcon |= S3C2440_SDIDCON_DATSTART;
1021 }
1022
1023 writel(dcon, host->base + S3C2410_SDIDCON);
1024
1025 /* write BSIZE register */
1026
1027 writel(data->blksz, host->base + S3C2410_SDIBSIZE);
1028
1029 /* add to IMASK register */
1030 imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC |
1031 S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH;
1032
1033 enable_imask(host, imsk);
1034
1035 /* write TIMER register */
1036
1037 if (host->is2440) {
1038 writel(0x007FFFFF, host->base + S3C2410_SDITIMER);
1039 } else {
1040 writel(0x0000FFFF, host->base + S3C2410_SDITIMER);
1041
1042 /* FIX: set slow clock to prevent timeouts on read */
1043 if (data->flags & MMC_DATA_READ)
1044 writel(0xFF, host->base + S3C2410_SDIPRE);
1045 }
1046
1047 return 0;
1048}
1049
1050#define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
1051
1052static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
1053{
1054 int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
1055
1056 BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
1057
1058 host->pio_sgptr = 0;
1059 host->pio_bytes = 0;
1060 host->pio_count = 0;
1061 host->pio_active = rw ? XFER_WRITE : XFER_READ;
1062
1063 if (rw) {
1064 do_pio_write(host);
1065 enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
1066 } else {
1067 enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF
1068 | S3C2410_SDIIMSK_RXFIFOLAST);
1069 }
1070
1071 return 0;
1072}
1073
1074static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
1075{
1076 int rw = data->flags & MMC_DATA_WRITE;
1077 struct dma_async_tx_descriptor *desc;
1078 struct dma_slave_config conf = {
1079 .src_addr = host->mem->start + host->sdidata,
1080 .dst_addr = host->mem->start + host->sdidata,
1081 .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
1082 .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
1083 };
1084
1085 BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
1086
1087 /* Restore prescaler value */
1088 writel(host->prescaler, host->base + S3C2410_SDIPRE);
1089
1090 if (!rw)
1091 conf.direction = DMA_DEV_TO_MEM;
1092 else
1093 conf.direction = DMA_MEM_TO_DEV;
1094
1095 dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
1096 mmc_get_dma_dir(data));
1097
1098 dmaengine_slave_config(host->dma, &conf);
1099 desc = dmaengine_prep_slave_sg(host->dma, data->sg, data->sg_len,
1100 conf.direction,
1101 DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
1102 if (!desc)
1103 goto unmap_exit;
1104 desc->callback = s3cmci_dma_done_callback;
1105 desc->callback_param = host;
1106 dmaengine_submit(desc);
1107 dma_async_issue_pending(host->dma);
1108
1109 return 0;
1110
1111unmap_exit:
1112 dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
1113 mmc_get_dma_dir(data));
1114 return -ENOMEM;
1115}
1116
1117static void s3cmci_send_request(struct mmc_host *mmc)
1118{
1119 struct s3cmci_host *host = mmc_priv(mmc);
1120 struct mmc_request *mrq = host->mrq;
1121 struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
1122
1123 host->ccnt++;
1124 prepare_dbgmsg(host, cmd, host->cmd_is_stop);
1125
1126 /* Clear command, data and fifo status registers
1127 Fifo clear only necessary on 2440, but doesn't hurt on 2410
1128 */
1129 writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT);
1130 writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA);
1131 writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA);
1132
1133 if (cmd->data) {
1134 int res = s3cmci_setup_data(host, cmd->data);
1135
1136 host->dcnt++;
1137
1138 if (res) {
1139 dbg(host, dbg_err, "setup data error %d\n", res);
1140 cmd->error = res;
1141 cmd->data->error = res;
1142
1143 mmc_request_done(mmc, mrq);
1144 return;
1145 }
1146
1147 if (s3cmci_host_usedma(host))
1148 res = s3cmci_prepare_dma(host, cmd->data);
1149 else
1150 res = s3cmci_prepare_pio(host, cmd->data);
1151
1152 if (res) {
1153 dbg(host, dbg_err, "data prepare error %d\n", res);
1154 cmd->error = res;
1155 cmd->data->error = res;
1156
1157 mmc_request_done(mmc, mrq);
1158 return;
1159 }
1160 }
1161
1162 /* Send command */
1163 s3cmci_send_command(host, cmd);
1164
1165 /* Enable Interrupt */
1166 s3cmci_enable_irq(host, true);
1167}
1168
1169static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1170{
1171 struct s3cmci_host *host = mmc_priv(mmc);
1172
1173 host->status = "mmc request";
1174 host->cmd_is_stop = 0;
1175 host->mrq = mrq;
1176
1177 if (mmc_gpio_get_cd(mmc) == 0) {
1178 dbg(host, dbg_err, "%s: no medium present\n", __func__);
1179 host->mrq->cmd->error = -ENOMEDIUM;
1180 mmc_request_done(mmc, mrq);
1181 } else
1182 s3cmci_send_request(mmc);
1183}
1184
1185static void s3cmci_set_clk(struct s3cmci_host *host, struct mmc_ios *ios)
1186{
1187 u32 mci_psc;
1188
1189 /* Set clock */
1190 for (mci_psc = 0; mci_psc < 255; mci_psc++) {
1191 host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1));
1192
1193 if (host->real_rate <= ios->clock)
1194 break;
1195 }
1196
1197 if (mci_psc > 255)
1198 mci_psc = 255;
1199
1200 host->prescaler = mci_psc;
1201 writel(host->prescaler, host->base + S3C2410_SDIPRE);
1202
1203 /* If requested clock is 0, real_rate will be 0, too */
1204 if (ios->clock == 0)
1205 host->real_rate = 0;
1206}
1207
1208static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1209{
1210 struct s3cmci_host *host = mmc_priv(mmc);
1211 u32 mci_con;
1212
1213 /* Set the power state */
1214
1215 mci_con = readl(host->base + S3C2410_SDICON);
1216
1217 switch (ios->power_mode) {
1218 case MMC_POWER_ON:
1219 case MMC_POWER_UP:
1220 /* Configure GPE5...GPE10 pins in SD mode */
1221 if (!host->pdev->dev.of_node)
1222 s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
1223 S3C_GPIO_PULL_NONE);
1224
1225 if (host->pdata->set_power)
1226 host->pdata->set_power(ios->power_mode, ios->vdd);
1227
1228 if (!host->is2440)
1229 mci_con |= S3C2410_SDICON_FIFORESET;
1230
1231 break;
1232
1233 case MMC_POWER_OFF:
1234 default:
1235 if (!host->pdev->dev.of_node)
1236 gpio_direction_output(S3C2410_GPE(5), 0);
1237
1238 if (host->is2440)
1239 mci_con |= S3C2440_SDICON_SDRESET;
1240
1241 if (host->pdata->set_power)
1242 host->pdata->set_power(ios->power_mode, ios->vdd);
1243
1244 break;
1245 }
1246
1247 s3cmci_set_clk(host, ios);
1248
1249 /* Set CLOCK_ENABLE */
1250 if (ios->clock)
1251 mci_con |= S3C2410_SDICON_CLOCKTYPE;
1252 else
1253 mci_con &= ~S3C2410_SDICON_CLOCKTYPE;
1254
1255 writel(mci_con, host->base + S3C2410_SDICON);
1256
1257 if ((ios->power_mode == MMC_POWER_ON) ||
1258 (ios->power_mode == MMC_POWER_UP)) {
1259 dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n",
1260 host->real_rate/1000, ios->clock/1000);
1261 } else {
1262 dbg(host, dbg_conf, "powered down.\n");
1263 }
1264
1265 host->bus_width = ios->bus_width;
1266}
1267
1268static void s3cmci_reset(struct s3cmci_host *host)
1269{
1270 u32 con = readl(host->base + S3C2410_SDICON);
1271
1272 con |= S3C2440_SDICON_SDRESET;
1273 writel(con, host->base + S3C2410_SDICON);
1274}
1275
1276static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1277{
1278 struct s3cmci_host *host = mmc_priv(mmc);
1279 unsigned long flags;
1280 u32 con;
1281
1282 local_irq_save(flags);
1283
1284 con = readl(host->base + S3C2410_SDICON);
1285 host->sdio_irqen = enable;
1286
1287 if (enable == host->sdio_irqen)
1288 goto same_state;
1289
1290 if (enable) {
1291 con |= S3C2410_SDICON_SDIOIRQ;
1292 enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
1293
1294 if (!host->irq_state && !host->irq_disabled) {
1295 host->irq_state = true;
1296 enable_irq(host->irq);
1297 }
1298 } else {
1299 disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
1300 con &= ~S3C2410_SDICON_SDIOIRQ;
1301
1302 if (!host->irq_enabled && host->irq_state) {
1303 disable_irq_nosync(host->irq);
1304 host->irq_state = false;
1305 }
1306 }
1307
1308 writel(con, host->base + S3C2410_SDICON);
1309
1310 same_state:
1311 local_irq_restore(flags);
1312
1313 s3cmci_check_sdio_irq(host);
1314}
1315
1316static const struct mmc_host_ops s3cmci_ops = {
1317 .request = s3cmci_request,
1318 .set_ios = s3cmci_set_ios,
1319 .get_ro = mmc_gpio_get_ro,
1320 .get_cd = mmc_gpio_get_cd,
1321 .enable_sdio_irq = s3cmci_enable_sdio_irq,
1322};
1323
1324static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
1325 /* This is currently here to avoid a number of if (host->pdata)
1326 * checks. Any zero fields to ensure reasonable defaults are picked. */
1327 .no_wprotect = 1,
1328 .no_detect = 1,
1329};
1330
1331#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
1332
1333static int s3cmci_cpufreq_transition(struct notifier_block *nb,
1334 unsigned long val, void *data)
1335{
1336 struct s3cmci_host *host;
1337 struct mmc_host *mmc;
1338 unsigned long newclk;
1339 unsigned long flags;
1340
1341 host = container_of(nb, struct s3cmci_host, freq_transition);
1342 newclk = clk_get_rate(host->clk);
1343 mmc = host->mmc;
1344
1345 if ((val == CPUFREQ_PRECHANGE && newclk > host->clk_rate) ||
1346 (val == CPUFREQ_POSTCHANGE && newclk < host->clk_rate)) {
1347 spin_lock_irqsave(&mmc->lock, flags);
1348
1349 host->clk_rate = newclk;
1350
1351 if (mmc->ios.power_mode != MMC_POWER_OFF &&
1352 mmc->ios.clock != 0)
1353 s3cmci_set_clk(host, &mmc->ios);
1354
1355 spin_unlock_irqrestore(&mmc->lock, flags);
1356 }
1357
1358 return 0;
1359}
1360
1361static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
1362{
1363 host->freq_transition.notifier_call = s3cmci_cpufreq_transition;
1364
1365 return cpufreq_register_notifier(&host->freq_transition,
1366 CPUFREQ_TRANSITION_NOTIFIER);
1367}
1368
1369static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
1370{
1371 cpufreq_unregister_notifier(&host->freq_transition,
1372 CPUFREQ_TRANSITION_NOTIFIER);
1373}
1374
1375#else
1376static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
1377{
1378 return 0;
1379}
1380
1381static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
1382{
1383}
1384#endif
1385
1386
1387#ifdef CONFIG_DEBUG_FS
1388
1389static int s3cmci_state_show(struct seq_file *seq, void *v)
1390{
1391 struct s3cmci_host *host = seq->private;
1392
1393 seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base);
1394 seq_printf(seq, "Clock rate = %ld\n", host->clk_rate);
1395 seq_printf(seq, "Prescale = %d\n", host->prescaler);
1396 seq_printf(seq, "is2440 = %d\n", host->is2440);
1397 seq_printf(seq, "IRQ = %d\n", host->irq);
1398 seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled);
1399 seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled);
1400 seq_printf(seq, "IRQ state = %d\n", host->irq_state);
1401 seq_printf(seq, "CD IRQ = %d\n", host->irq_cd);
1402 seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host));
1403 seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk);
1404 seq_printf(seq, "SDIDATA at %d\n", host->sdidata);
1405
1406 return 0;
1407}
1408
1409static int s3cmci_state_open(struct inode *inode, struct file *file)
1410{
1411 return single_open(file, s3cmci_state_show, inode->i_private);
1412}
1413
1414static const struct file_operations s3cmci_fops_state = {
1415 .owner = THIS_MODULE,
1416 .open = s3cmci_state_open,
1417 .read = seq_read,
1418 .llseek = seq_lseek,
1419 .release = single_release,
1420};
1421
1422#define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r }
1423
1424struct s3cmci_reg {
1425 unsigned short addr;
1426 unsigned char *name;
1427};
1428
1429static const struct s3cmci_reg debug_regs[] = {
1430 DBG_REG(CON),
1431 DBG_REG(PRE),
1432 DBG_REG(CMDARG),
1433 DBG_REG(CMDCON),
1434 DBG_REG(CMDSTAT),
1435 DBG_REG(RSP0),
1436 DBG_REG(RSP1),
1437 DBG_REG(RSP2),
1438 DBG_REG(RSP3),
1439 DBG_REG(TIMER),
1440 DBG_REG(BSIZE),
1441 DBG_REG(DCON),
1442 DBG_REG(DCNT),
1443 DBG_REG(DSTA),
1444 DBG_REG(FSTA),
1445 {}
1446};
1447
1448static int s3cmci_regs_show(struct seq_file *seq, void *v)
1449{
1450 struct s3cmci_host *host = seq->private;
1451 const struct s3cmci_reg *rptr = debug_regs;
1452
1453 for (; rptr->name; rptr++)
1454 seq_printf(seq, "SDI%s\t=0x%08x\n", rptr->name,
1455 readl(host->base + rptr->addr));
1456
1457 seq_printf(seq, "SDIIMSK\t=0x%08x\n", readl(host->base + host->sdiimsk));
1458
1459 return 0;
1460}
1461
1462static int s3cmci_regs_open(struct inode *inode, struct file *file)
1463{
1464 return single_open(file, s3cmci_regs_show, inode->i_private);
1465}
1466
1467static const struct file_operations s3cmci_fops_regs = {
1468 .owner = THIS_MODULE,
1469 .open = s3cmci_regs_open,
1470 .read = seq_read,
1471 .llseek = seq_lseek,
1472 .release = single_release,
1473};
1474
1475static void s3cmci_debugfs_attach(struct s3cmci_host *host)
1476{
1477 struct device *dev = &host->pdev->dev;
1478
1479 host->debug_root = debugfs_create_dir(dev_name(dev), NULL);
1480 if (IS_ERR(host->debug_root)) {
1481 dev_err(dev, "failed to create debugfs root\n");
1482 return;
1483 }
1484
1485 host->debug_state = debugfs_create_file("state", 0444,
1486 host->debug_root, host,
1487 &s3cmci_fops_state);
1488
1489 if (IS_ERR(host->debug_state))
1490 dev_err(dev, "failed to create debug state file\n");
1491
1492 host->debug_regs = debugfs_create_file("regs", 0444,
1493 host->debug_root, host,
1494 &s3cmci_fops_regs);
1495
1496 if (IS_ERR(host->debug_regs))
1497 dev_err(dev, "failed to create debug regs file\n");
1498}
1499
1500static void s3cmci_debugfs_remove(struct s3cmci_host *host)
1501{
1502 debugfs_remove(host->debug_regs);
1503 debugfs_remove(host->debug_state);
1504 debugfs_remove(host->debug_root);
1505}
1506
1507#else
1508static inline void s3cmci_debugfs_attach(struct s3cmci_host *host) { }
1509static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
1510
1511#endif /* CONFIG_DEBUG_FS */
1512
1513static int s3cmci_probe_pdata(struct s3cmci_host *host)
1514{
1515 struct platform_device *pdev = host->pdev;
1516 struct mmc_host *mmc = host->mmc;
1517 struct s3c24xx_mci_pdata *pdata;
1518 int i, ret;
1519
1520 host->is2440 = platform_get_device_id(pdev)->driver_data;
1521
1522 for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
1523 ret = gpio_request(i, dev_name(&pdev->dev));
1524 if (ret) {
1525 dev_err(&pdev->dev, "failed to get gpio %d\n", i);
1526
1527 for (i--; i >= S3C2410_GPE(5); i--)
1528 gpio_free(i);
1529
1530 return ret;
1531 }
1532 }
1533
1534 if (!pdev->dev.platform_data)
1535 pdev->dev.platform_data = &s3cmci_def_pdata;
1536
1537 pdata = pdev->dev.platform_data;
1538
1539 if (pdata->no_wprotect)
1540 mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
1541
1542 if (pdata->no_detect)
1543 mmc->caps |= MMC_CAP_NEEDS_POLL;
1544
1545 if (pdata->wprotect_invert)
1546 mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
1547
1548 if (pdata->detect_invert)
1549 mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
1550
1551 if (gpio_is_valid(pdata->gpio_detect)) {
1552 ret = mmc_gpio_request_cd(mmc, pdata->gpio_detect, 0);
1553 if (ret) {
1554 dev_err(&pdev->dev, "error requesting GPIO for CD %d\n",
1555 ret);
1556 return ret;
1557 }
1558 }
1559
1560 if (gpio_is_valid(pdata->gpio_wprotect)) {
1561 ret = mmc_gpio_request_ro(mmc, pdata->gpio_wprotect);
1562 if (ret) {
1563 dev_err(&pdev->dev, "error requesting GPIO for WP %d\n",
1564 ret);
1565 return ret;
1566 }
1567 }
1568
1569 return 0;
1570}
1571
1572static int s3cmci_probe_dt(struct s3cmci_host *host)
1573{
1574 struct platform_device *pdev = host->pdev;
1575 struct s3c24xx_mci_pdata *pdata;
1576 struct mmc_host *mmc = host->mmc;
1577 int ret;
1578
1579 host->is2440 = (int) of_device_get_match_data(&pdev->dev);
1580
1581 ret = mmc_of_parse(mmc);
1582 if (ret)
1583 return ret;
1584
1585 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
1586 if (!pdata)
1587 return -ENOMEM;
1588
1589 pdev->dev.platform_data = pdata;
1590
1591 return 0;
1592}
1593
1594static int s3cmci_probe(struct platform_device *pdev)
1595{
1596 struct s3cmci_host *host;
1597 struct mmc_host *mmc;
1598 int ret;
1599 int i;
1600
1601 mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
1602 if (!mmc) {
1603 ret = -ENOMEM;
1604 goto probe_out;
1605 }
1606
1607 host = mmc_priv(mmc);
1608 host->mmc = mmc;
1609 host->pdev = pdev;
1610
1611 if (pdev->dev.of_node)
1612 ret = s3cmci_probe_dt(host);
1613 else
1614 ret = s3cmci_probe_pdata(host);
1615
1616 if (ret)
1617 goto probe_free_host;
1618
1619 host->pdata = pdev->dev.platform_data;
1620
1621 spin_lock_init(&host->complete_lock);
1622 tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
1623
1624 if (host->is2440) {
1625 host->sdiimsk = S3C2440_SDIIMSK;
1626 host->sdidata = S3C2440_SDIDATA;
1627 host->clk_div = 1;
1628 } else {
1629 host->sdiimsk = S3C2410_SDIIMSK;
1630 host->sdidata = S3C2410_SDIDATA;
1631 host->clk_div = 2;
1632 }
1633
1634 host->complete_what = COMPLETION_NONE;
1635 host->pio_active = XFER_NONE;
1636
1637 host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1638 if (!host->mem) {
1639 dev_err(&pdev->dev,
1640 "failed to get io memory region resource.\n");
1641
1642 ret = -ENOENT;
1643 goto probe_free_gpio;
1644 }
1645
1646 host->mem = request_mem_region(host->mem->start,
1647 resource_size(host->mem), pdev->name);
1648
1649 if (!host->mem) {
1650 dev_err(&pdev->dev, "failed to request io memory region.\n");
1651 ret = -ENOENT;
1652 goto probe_free_gpio;
1653 }
1654
1655 host->base = ioremap(host->mem->start, resource_size(host->mem));
1656 if (!host->base) {
1657 dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
1658 ret = -EINVAL;
1659 goto probe_free_mem_region;
1660 }
1661
1662 host->irq = platform_get_irq(pdev, 0);
1663 if (host->irq <= 0) {
1664 dev_err(&pdev->dev, "failed to get interrupt resource.\n");
1665 ret = -EINVAL;
1666 goto probe_iounmap;
1667 }
1668
1669 if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) {
1670 dev_err(&pdev->dev, "failed to request mci interrupt.\n");
1671 ret = -ENOENT;
1672 goto probe_iounmap;
1673 }
1674
1675 /* We get spurious interrupts even when we have set the IMSK
1676 * register to ignore everything, so use disable_irq() to make
1677 * ensure we don't lock the system with un-serviceable requests. */
1678
1679 disable_irq(host->irq);
1680 host->irq_state = false;
1681
1682 /* Depending on the dma state, get a DMA channel to use. */
1683
1684 if (s3cmci_host_usedma(host)) {
1685 host->dma = dma_request_chan(&pdev->dev, "rx-tx");
1686 ret = PTR_ERR_OR_ZERO(host->dma);
1687 if (ret) {
1688 dev_err(&pdev->dev, "cannot get DMA channel.\n");
1689 goto probe_free_irq;
1690 }
1691 }
1692
1693 host->clk = clk_get(&pdev->dev, "sdi");
1694 if (IS_ERR(host->clk)) {
1695 dev_err(&pdev->dev, "failed to find clock source.\n");
1696 ret = PTR_ERR(host->clk);
1697 host->clk = NULL;
1698 goto probe_free_dma;
1699 }
1700
1701 ret = clk_prepare_enable(host->clk);
1702 if (ret) {
1703 dev_err(&pdev->dev, "failed to enable clock source.\n");
1704 goto clk_free;
1705 }
1706
1707 host->clk_rate = clk_get_rate(host->clk);
1708
1709 mmc->ops = &s3cmci_ops;
1710 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
1711#ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ
1712 mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
1713#else
1714 mmc->caps = MMC_CAP_4_BIT_DATA;
1715#endif
1716 mmc->f_min = host->clk_rate / (host->clk_div * 256);
1717 mmc->f_max = host->clk_rate / host->clk_div;
1718
1719 if (host->pdata->ocr_avail)
1720 mmc->ocr_avail = host->pdata->ocr_avail;
1721
1722 mmc->max_blk_count = 4095;
1723 mmc->max_blk_size = 4095;
1724 mmc->max_req_size = 4095 * 512;
1725 mmc->max_seg_size = mmc->max_req_size;
1726
1727 mmc->max_segs = 128;
1728
1729 dbg(host, dbg_debug,
1730 "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%p.\n",
1731 (host->is2440?"2440":""),
1732 host->base, host->irq, host->irq_cd, host->dma);
1733
1734 ret = s3cmci_cpufreq_register(host);
1735 if (ret) {
1736 dev_err(&pdev->dev, "failed to register cpufreq\n");
1737 goto free_dmabuf;
1738 }
1739
1740 ret = mmc_add_host(mmc);
1741 if (ret) {
1742 dev_err(&pdev->dev, "failed to add mmc host.\n");
1743 goto free_cpufreq;
1744 }
1745
1746 s3cmci_debugfs_attach(host);
1747
1748 platform_set_drvdata(pdev, mmc);
1749 dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc),
1750 s3cmci_host_usedma(host) ? "dma" : "pio",
1751 mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw");
1752
1753 return 0;
1754
1755 free_cpufreq:
1756 s3cmci_cpufreq_deregister(host);
1757
1758 free_dmabuf:
1759 clk_disable_unprepare(host->clk);
1760
1761 clk_free:
1762 clk_put(host->clk);
1763
1764 probe_free_dma:
1765 if (s3cmci_host_usedma(host))
1766 dma_release_channel(host->dma);
1767
1768 probe_free_irq:
1769 free_irq(host->irq, host);
1770
1771 probe_iounmap:
1772 iounmap(host->base);
1773
1774 probe_free_mem_region:
1775 release_mem_region(host->mem->start, resource_size(host->mem));
1776
1777 probe_free_gpio:
1778 if (!pdev->dev.of_node)
1779 for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
1780 gpio_free(i);
1781
1782 probe_free_host:
1783 mmc_free_host(mmc);
1784
1785 probe_out:
1786 return ret;
1787}
1788
1789static void s3cmci_shutdown(struct platform_device *pdev)
1790{
1791 struct mmc_host *mmc = platform_get_drvdata(pdev);
1792 struct s3cmci_host *host = mmc_priv(mmc);
1793
1794 if (host->irq_cd >= 0)
1795 free_irq(host->irq_cd, host);
1796
1797 s3cmci_debugfs_remove(host);
1798 s3cmci_cpufreq_deregister(host);
1799 mmc_remove_host(mmc);
1800 clk_disable_unprepare(host->clk);
1801}
1802
1803static int s3cmci_remove(struct platform_device *pdev)
1804{
1805 struct mmc_host *mmc = platform_get_drvdata(pdev);
1806 struct s3cmci_host *host = mmc_priv(mmc);
1807 int i;
1808
1809 s3cmci_shutdown(pdev);
1810
1811 clk_put(host->clk);
1812
1813 tasklet_disable(&host->pio_tasklet);
1814
1815 if (s3cmci_host_usedma(host))
1816 dma_release_channel(host->dma);
1817
1818 free_irq(host->irq, host);
1819
1820 if (!pdev->dev.of_node)
1821 for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
1822 gpio_free(i);
1823
1824 iounmap(host->base);
1825 release_mem_region(host->mem->start, resource_size(host->mem));
1826
1827 mmc_free_host(mmc);
1828 return 0;
1829}
1830
1831static const struct of_device_id s3cmci_dt_match[] = {
1832 {
1833 .compatible = "samsung,s3c2410-sdi",
1834 .data = (void *)0,
1835 },
1836 {
1837 .compatible = "samsung,s3c2412-sdi",
1838 .data = (void *)1,
1839 },
1840 {
1841 .compatible = "samsung,s3c2440-sdi",
1842 .data = (void *)1,
1843 },
1844 { /* sentinel */ },
1845};
1846MODULE_DEVICE_TABLE(of, s3cmci_dt_match);
1847
1848static const struct platform_device_id s3cmci_driver_ids[] = {
1849 {
1850 .name = "s3c2410-sdi",
1851 .driver_data = 0,
1852 }, {
1853 .name = "s3c2412-sdi",
1854 .driver_data = 1,
1855 }, {
1856 .name = "s3c2440-sdi",
1857 .driver_data = 1,
1858 },
1859 { }
1860};
1861
1862MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids);
1863
1864static struct platform_driver s3cmci_driver = {
1865 .driver = {
1866 .name = "s3c-sdi",
1867 .of_match_table = s3cmci_dt_match,
1868 },
1869 .id_table = s3cmci_driver_ids,
1870 .probe = s3cmci_probe,
1871 .remove = s3cmci_remove,
1872 .shutdown = s3cmci_shutdown,
1873};
1874
1875module_platform_driver(s3cmci_driver);
1876
1877MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
1878MODULE_LICENSE("GPL v2");
1879MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");