Loading...
Note: File does not exist in v3.5.6.
1/*
2 * OMAP3xxx PRM module functions
3 *
4 * Copyright (C) 2010-2012 Texas Instruments, Inc.
5 * Copyright (C) 2010 Nokia Corporation
6 * Benoît Cousson
7 * Paul Walmsley
8 * Rajendra Nayak <rnayak@ti.com>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15#include <linux/kernel.h>
16#include <linux/errno.h>
17#include <linux/err.h>
18#include <linux/io.h>
19#include <linux/irq.h>
20#include <linux/of_irq.h>
21
22#include "soc.h"
23#include "common.h"
24#include "vp.h"
25#include "powerdomain.h"
26#include "prm3xxx.h"
27#include "prm2xxx_3xxx.h"
28#include "cm2xxx_3xxx.h"
29#include "prm-regbits-34xx.h"
30#include "cm3xxx.h"
31#include "cm-regbits-34xx.h"
32#include "clock.h"
33
34static void omap3xxx_prm_read_pending_irqs(unsigned long *events);
35static void omap3xxx_prm_ocp_barrier(void);
36static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
37static void omap3xxx_prm_restore_irqen(u32 *saved_mask);
38
39static const struct omap_prcm_irq omap3_prcm_irqs[] = {
40 OMAP_PRCM_IRQ("wkup", 0, 0),
41 OMAP_PRCM_IRQ("io", 9, 1),
42};
43
44static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
45 .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
46 .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
47 .nr_regs = 1,
48 .irqs = omap3_prcm_irqs,
49 .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
50 .irq = 11 + OMAP_INTC_START,
51 .read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
52 .ocp_barrier = &omap3xxx_prm_ocp_barrier,
53 .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
54 .restore_irqen = &omap3xxx_prm_restore_irqen,
55 .reconfigure_io_chain = NULL,
56};
57
58/*
59 * omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware
60 * register (which are specific to OMAP3xxx SoCs) to reset source ID
61 * bit shifts (which is an OMAP SoC-independent enumeration)
62 */
63static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = {
64 { OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
65 { OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
66 { OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
67 { OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
68 { OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
69 { OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
70 { OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT,
71 OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
72 { OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT,
73 OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
74 { OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
75 { OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT },
76 { -1, -1 },
77};
78
79/* PRM VP */
80
81/*
82 * struct omap3_vp - OMAP3 VP register access description.
83 * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
84 */
85struct omap3_vp {
86 u32 tranxdone_status;
87};
88
89static struct omap3_vp omap3_vp[] = {
90 [OMAP3_VP_VDD_MPU_ID] = {
91 .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
92 },
93 [OMAP3_VP_VDD_CORE_ID] = {
94 .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
95 },
96};
97
98#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
99
100static u32 omap3_prm_vp_check_txdone(u8 vp_id)
101{
102 struct omap3_vp *vp = &omap3_vp[vp_id];
103 u32 irqstatus;
104
105 irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
106 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
107 return irqstatus & vp->tranxdone_status;
108}
109
110static void omap3_prm_vp_clear_txdone(u8 vp_id)
111{
112 struct omap3_vp *vp = &omap3_vp[vp_id];
113
114 omap2_prm_write_mod_reg(vp->tranxdone_status,
115 OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
116}
117
118u32 omap3_prm_vcvp_read(u8 offset)
119{
120 return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
121}
122
123void omap3_prm_vcvp_write(u32 val, u8 offset)
124{
125 omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
126}
127
128u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
129{
130 return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
131}
132
133/**
134 * omap3xxx_prm_dpll3_reset - use DPLL3 reset to reboot the OMAP SoC
135 *
136 * Set the DPLL3 reset bit, which should reboot the SoC. This is the
137 * recommended way to restart the SoC, considering Errata i520. No
138 * return value.
139 */
140static void omap3xxx_prm_dpll3_reset(void)
141{
142 omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD,
143 OMAP2_RM_RSTCTRL);
144 /* OCP barrier */
145 omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL);
146}
147
148/**
149 * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
150 * @events: ptr to a u32, preallocated by caller
151 *
152 * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
153 * MPU IRQs, and store the result into the u32 pointed to by @events.
154 * No return value.
155 */
156static void omap3xxx_prm_read_pending_irqs(unsigned long *events)
157{
158 u32 mask, st;
159
160 /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
161 mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
162 st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
163
164 events[0] = mask & st;
165}
166
167/**
168 * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
169 *
170 * Force any buffered writes to the PRM IP block to complete. Needed
171 * by the PRM IRQ handler, which reads and writes directly to the IP
172 * block, to avoid race conditions after acknowledging or clearing IRQ
173 * bits. No return value.
174 */
175static void omap3xxx_prm_ocp_barrier(void)
176{
177 omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
178}
179
180/**
181 * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
182 * @saved_mask: ptr to a u32 array to save IRQENABLE bits
183 *
184 * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
185 * must be allocated by the caller. Intended to be used in the PRM
186 * interrupt handler suspend callback. The OCP barrier is needed to
187 * ensure the write to disable PRM interrupts reaches the PRM before
188 * returning; otherwise, spurious interrupts might occur. No return
189 * value.
190 */
191static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
192{
193 saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
194 OMAP3_PRM_IRQENABLE_MPU_OFFSET);
195 omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
196
197 /* OCP barrier */
198 omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
199}
200
201/**
202 * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
203 * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
204 *
205 * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
206 * to be used in the PRM interrupt handler resume callback to restore
207 * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
208 * barrier should be needed here; any pending PRM interrupts will fire
209 * once the writes reach the PRM. No return value.
210 */
211static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
212{
213 omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
214 OMAP3_PRM_IRQENABLE_MPU_OFFSET);
215}
216
217/**
218 * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
219 * @module: PRM module to clear wakeups from
220 * @regs: register set to clear, 1 or 3
221 * @wkst_mask: wkst bits to clear
222 *
223 * The purpose of this function is to clear any wake-up events latched
224 * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
225 * may occur whilst attempting to clear a PM_WKST_x register and thus
226 * set another bit in this register. A while loop is used to ensure
227 * that any peripheral wake-up events occurring while attempting to
228 * clear the PM_WKST_x are detected and cleared.
229 */
230static int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
231{
232 u32 wkst, fclk, iclk, clken;
233 u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
234 u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
235 u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
236 u16 grpsel_off = (regs == 3) ?
237 OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
238 int c = 0;
239
240 wkst = omap2_prm_read_mod_reg(module, wkst_off);
241 wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
242 wkst &= wkst_mask;
243 if (wkst) {
244 iclk = omap2_cm_read_mod_reg(module, iclk_off);
245 fclk = omap2_cm_read_mod_reg(module, fclk_off);
246 while (wkst) {
247 clken = wkst;
248 omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
249 /*
250 * For USBHOST, we don't know whether HOST1 or
251 * HOST2 woke us up, so enable both f-clocks
252 */
253 if (module == OMAP3430ES2_USBHOST_MOD)
254 clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
255 omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
256 omap2_prm_write_mod_reg(wkst, module, wkst_off);
257 wkst = omap2_prm_read_mod_reg(module, wkst_off);
258 wkst &= wkst_mask;
259 c++;
260 }
261 omap2_cm_write_mod_reg(iclk, module, iclk_off);
262 omap2_cm_write_mod_reg(fclk, module, fclk_off);
263 }
264
265 return c;
266}
267
268/**
269 * omap3_prm_reset_modem - toggle reset signal for modem
270 *
271 * Toggles the reset signal to modem IP block. Required to allow
272 * OMAP3430 without stacked modem to idle properly.
273 */
274void __init omap3_prm_reset_modem(void)
275{
276 omap2_prm_write_mod_reg(
277 OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
278 OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
279 CORE_MOD, OMAP2_RM_RSTCTRL);
280 omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
281}
282
283/**
284 * omap3_prm_init_pm - initialize PM related registers for PRM
285 * @has_uart4: SoC has UART4
286 * @has_iva: SoC has IVA
287 *
288 * Initializes PRM registers for PM use. Called from PM init.
289 */
290void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
291{
292 u32 en_uart4_mask;
293 u32 grpsel_uart4_mask;
294
295 /*
296 * Enable control of expternal oscillator through
297 * sys_clkreq. In the long run clock framework should
298 * take care of this.
299 */
300 omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
301 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
302 OMAP3430_GR_MOD,
303 OMAP3_PRM_CLKSRC_CTRL_OFFSET);
304
305 /* setup wakup source */
306 omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
307 OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
308 WKUP_MOD, PM_WKEN);
309 /* No need to write EN_IO, that is always enabled */
310 omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
311 OMAP3430_GRPSEL_GPT1_MASK |
312 OMAP3430_GRPSEL_GPT12_MASK,
313 WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
314
315 /* Enable PM_WKEN to support DSS LPR */
316 omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
317 OMAP3430_DSS_MOD, PM_WKEN);
318
319 if (has_uart4) {
320 en_uart4_mask = OMAP3630_EN_UART4_MASK;
321 grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
322 } else {
323 en_uart4_mask = 0;
324 grpsel_uart4_mask = 0;
325 }
326
327 /* Enable wakeups in PER */
328 omap2_prm_write_mod_reg(en_uart4_mask |
329 OMAP3430_EN_GPIO2_MASK |
330 OMAP3430_EN_GPIO3_MASK |
331 OMAP3430_EN_GPIO4_MASK |
332 OMAP3430_EN_GPIO5_MASK |
333 OMAP3430_EN_GPIO6_MASK |
334 OMAP3430_EN_UART3_MASK |
335 OMAP3430_EN_MCBSP2_MASK |
336 OMAP3430_EN_MCBSP3_MASK |
337 OMAP3430_EN_MCBSP4_MASK,
338 OMAP3430_PER_MOD, PM_WKEN);
339
340 /* and allow them to wake up MPU */
341 omap2_prm_write_mod_reg(grpsel_uart4_mask |
342 OMAP3430_GRPSEL_GPIO2_MASK |
343 OMAP3430_GRPSEL_GPIO3_MASK |
344 OMAP3430_GRPSEL_GPIO4_MASK |
345 OMAP3430_GRPSEL_GPIO5_MASK |
346 OMAP3430_GRPSEL_GPIO6_MASK |
347 OMAP3430_GRPSEL_UART3_MASK |
348 OMAP3430_GRPSEL_MCBSP2_MASK |
349 OMAP3430_GRPSEL_MCBSP3_MASK |
350 OMAP3430_GRPSEL_MCBSP4_MASK,
351 OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
352
353 /* Don't attach IVA interrupts */
354 if (has_iva) {
355 omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
356 omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
357 omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
358 omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
359 OMAP3430_PM_IVAGRPSEL);
360 }
361
362 /* Clear any pending 'reset' flags */
363 omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
364 omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
365 omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
366 omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
367 omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
368 omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
369 omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD,
370 OMAP2_RM_RSTST);
371
372 /* Clear any pending PRCM interrupts */
373 omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
374
375 /* We need to idle iva2_pwrdm even on am3703 with no iva2. */
376 omap3xxx_prm_iva_idle();
377
378 omap3_prm_reset_modem();
379}
380
381/**
382 * omap3430_pre_es3_1_reconfigure_io_chain - restart wake-up daisy chain
383 *
384 * The ST_IO_CHAIN bit does not exist in 3430 before es3.1. The only
385 * thing we can do is toggle EN_IO bit for earlier omaps.
386 */
387static void omap3430_pre_es3_1_reconfigure_io_chain(void)
388{
389 omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
390 PM_WKEN);
391 omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
392 PM_WKEN);
393 omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
394}
395
396/**
397 * omap3_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
398 *
399 * Clear any previously-latched I/O wakeup events and ensure that the
400 * I/O wakeup gates are aligned with the current mux settings. Works
401 * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
402 * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
403 * return value. These registers are only available in 3430 es3.1 and later.
404 */
405static void omap3_prm_reconfigure_io_chain(void)
406{
407 int i = 0;
408
409 omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
410 PM_WKEN);
411
412 omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
413 OMAP3430_ST_IO_CHAIN_MASK,
414 MAX_IOPAD_LATCH_TIME, i);
415 if (i == MAX_IOPAD_LATCH_TIME)
416 pr_warn("PRM: I/O chain clock line assertion timed out\n");
417
418 omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
419 PM_WKEN);
420
421 omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
422 PM_WKST);
423
424 omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
425}
426
427/**
428 * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
429 *
430 * Activates the I/O wakeup event latches and allows events logged by
431 * those latches to signal a wakeup event to the PRCM. For I/O
432 * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
433 * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
434 * No return value.
435 */
436static void __init omap3xxx_prm_enable_io_wakeup(void)
437{
438 if (prm_features & PRM_HAS_IO_WAKEUP)
439 omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
440 PM_WKEN);
441}
442
443/**
444 * omap3xxx_prm_read_reset_sources - return the last SoC reset source
445 *
446 * Return a u32 representing the last reset sources of the SoC. The
447 * returned reset source bits are standardized across OMAP SoCs.
448 */
449static u32 omap3xxx_prm_read_reset_sources(void)
450{
451 struct prm_reset_src_map *p;
452 u32 r = 0;
453 u32 v;
454
455 v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
456
457 p = omap3xxx_prm_reset_src_map;
458 while (p->reg_shift >= 0 && p->std_shift >= 0) {
459 if (v & (1 << p->reg_shift))
460 r |= 1 << p->std_shift;
461 p++;
462 }
463
464 return r;
465}
466
467/**
468 * omap3xxx_prm_iva_idle - ensure IVA is in idle so it can be put into retention
469 *
470 * In cases where IVA2 is activated by bootcode, it may prevent
471 * full-chip retention or off-mode because it is not idle. This
472 * function forces the IVA2 into idle state so it can go
473 * into retention/off and thus allow full-chip retention/off.
474 */
475void omap3xxx_prm_iva_idle(void)
476{
477 /* ensure IVA2 clock is disabled */
478 omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
479
480 /* if no clock activity, nothing else to do */
481 if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
482 OMAP3430_CLKACTIVITY_IVA2_MASK))
483 return;
484
485 /* Reset IVA2 */
486 omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
487 OMAP3430_RST2_IVA2_MASK |
488 OMAP3430_RST3_IVA2_MASK,
489 OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
490
491 /* Enable IVA2 clock */
492 omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
493 OMAP3430_IVA2_MOD, CM_FCLKEN);
494
495 /* Un-reset IVA2 */
496 omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
497
498 /* Disable IVA2 clock */
499 omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
500
501 /* Reset IVA2 */
502 omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
503 OMAP3430_RST2_IVA2_MASK |
504 OMAP3430_RST3_IVA2_MASK,
505 OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
506}
507
508/**
509 * omap3xxx_prm_clear_global_cold_reset - checks the global cold reset status
510 * and clears it if asserted
511 *
512 * Checks if cold-reset has occurred and clears the status bit if yes. Returns
513 * 1 if cold-reset has occurred, 0 otherwise.
514 */
515int omap3xxx_prm_clear_global_cold_reset(void)
516{
517 if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
518 OMAP3430_GLOBAL_COLD_RST_MASK) {
519 omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
520 OMAP3430_GR_MOD,
521 OMAP3_PRM_RSTST_OFFSET);
522 return 1;
523 }
524
525 return 0;
526}
527
528void omap3_prm_save_scratchpad_contents(u32 *ptr)
529{
530 *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
531 OMAP3_PRM_CLKSRC_CTRL_OFFSET);
532
533 *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
534 OMAP3_PRM_CLKSEL_OFFSET);
535}
536
537/* Powerdomain low-level functions */
538
539static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
540{
541 omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
542 (pwrst << OMAP_POWERSTATE_SHIFT),
543 pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
544 return 0;
545}
546
547static int omap3_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
548{
549 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
550 OMAP2_PM_PWSTCTRL,
551 OMAP_POWERSTATE_MASK);
552}
553
554static int omap3_pwrdm_read_pwrst(struct powerdomain *pwrdm)
555{
556 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
557 OMAP2_PM_PWSTST,
558 OMAP_POWERSTATEST_MASK);
559}
560
561/* Applicable only for OMAP3. Not supported on OMAP2 */
562static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
563{
564 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
565 OMAP3430_PM_PREPWSTST,
566 OMAP3430_LASTPOWERSTATEENTERED_MASK);
567}
568
569static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
570{
571 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
572 OMAP2_PM_PWSTST,
573 OMAP3430_LOGICSTATEST_MASK);
574}
575
576static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
577{
578 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
579 OMAP2_PM_PWSTCTRL,
580 OMAP3430_LOGICSTATEST_MASK);
581}
582
583static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
584{
585 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
586 OMAP3430_PM_PREPWSTST,
587 OMAP3430_LASTLOGICSTATEENTERED_MASK);
588}
589
590static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
591{
592 switch (bank) {
593 case 0:
594 return OMAP3430_LASTMEM1STATEENTERED_MASK;
595 case 1:
596 return OMAP3430_LASTMEM2STATEENTERED_MASK;
597 case 2:
598 return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
599 case 3:
600 return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
601 default:
602 WARN_ON(1); /* should never happen */
603 return -EEXIST;
604 }
605 return 0;
606}
607
608static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
609{
610 u32 m;
611
612 m = omap3_get_mem_bank_lastmemst_mask(bank);
613
614 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
615 OMAP3430_PM_PREPWSTST, m);
616}
617
618static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
619{
620 omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
621 return 0;
622}
623
624static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
625{
626 return omap2_prm_rmw_mod_reg_bits(0,
627 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
628 pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
629}
630
631static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
632{
633 return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
634 0, pwrdm->prcm_offs,
635 OMAP2_PM_PWSTCTRL);
636}
637
638struct pwrdm_ops omap3_pwrdm_operations = {
639 .pwrdm_set_next_pwrst = omap3_pwrdm_set_next_pwrst,
640 .pwrdm_read_next_pwrst = omap3_pwrdm_read_next_pwrst,
641 .pwrdm_read_pwrst = omap3_pwrdm_read_pwrst,
642 .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst,
643 .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
644 .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
645 .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst,
646 .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst,
647 .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
648 .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
649 .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
650 .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
651 .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst,
652 .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst,
653 .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar,
654 .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar,
655 .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
656};
657
658/*
659 *
660 */
661
662static int omap3xxx_prm_late_init(void);
663
664static struct prm_ll_data omap3xxx_prm_ll_data = {
665 .read_reset_sources = &omap3xxx_prm_read_reset_sources,
666 .late_init = &omap3xxx_prm_late_init,
667 .assert_hardreset = &omap2_prm_assert_hardreset,
668 .deassert_hardreset = &omap2_prm_deassert_hardreset,
669 .is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
670 .reset_system = &omap3xxx_prm_dpll3_reset,
671 .clear_mod_irqs = &omap3xxx_prm_clear_mod_irqs,
672 .vp_check_txdone = &omap3_prm_vp_check_txdone,
673 .vp_clear_txdone = &omap3_prm_vp_clear_txdone,
674};
675
676int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data)
677{
678 omap2_clk_legacy_provider_init(TI_CLKM_PRM,
679 prm_base.va + OMAP3430_IVA2_MOD);
680 if (omap3_has_io_wakeup())
681 prm_features |= PRM_HAS_IO_WAKEUP;
682
683 return prm_register(&omap3xxx_prm_ll_data);
684}
685
686static const struct of_device_id omap3_prm_dt_match_table[] = {
687 { .compatible = "ti,omap3-prm" },
688 { }
689};
690
691static int omap3xxx_prm_late_init(void)
692{
693 struct device_node *np;
694 int irq_num;
695
696 if (!(prm_features & PRM_HAS_IO_WAKEUP))
697 return 0;
698
699 if (omap3_has_io_chain_ctrl())
700 omap3_prcm_irq_setup.reconfigure_io_chain =
701 omap3_prm_reconfigure_io_chain;
702 else
703 omap3_prcm_irq_setup.reconfigure_io_chain =
704 omap3430_pre_es3_1_reconfigure_io_chain;
705
706 np = of_find_matching_node(NULL, omap3_prm_dt_match_table);
707 if (!np) {
708 pr_err("PRM: no device tree node for interrupt?\n");
709
710 return -ENODEV;
711 }
712
713 irq_num = of_irq_get(np, 0);
714 if (irq_num == -EPROBE_DEFER)
715 return irq_num;
716
717 omap3_prcm_irq_setup.irq = irq_num;
718
719 omap3xxx_prm_enable_io_wakeup();
720
721 return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
722}
723
724static void __exit omap3xxx_prm_exit(void)
725{
726 prm_unregister(&omap3xxx_prm_ll_data);
727}
728__exitcall(omap3xxx_prm_exit);