Loading...
1/*
2 * Seiko Instruments S-35390A RTC Driver
3 *
4 * Copyright (c) 2007 Byron Bradley
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
10 */
11
12#include <linux/module.h>
13#include <linux/rtc.h>
14#include <linux/i2c.h>
15#include <linux/bitrev.h>
16#include <linux/bcd.h>
17#include <linux/slab.h>
18
19#define S35390A_CMD_STATUS1 0
20#define S35390A_CMD_STATUS2 1
21#define S35390A_CMD_TIME1 2
22
23#define S35390A_BYTE_YEAR 0
24#define S35390A_BYTE_MONTH 1
25#define S35390A_BYTE_DAY 2
26#define S35390A_BYTE_WDAY 3
27#define S35390A_BYTE_HOURS 4
28#define S35390A_BYTE_MINS 5
29#define S35390A_BYTE_SECS 6
30
31#define S35390A_FLAG_POC 0x01
32#define S35390A_FLAG_BLD 0x02
33#define S35390A_FLAG_24H 0x40
34#define S35390A_FLAG_RESET 0x80
35#define S35390A_FLAG_TEST 0x01
36
37static const struct i2c_device_id s35390a_id[] = {
38 { "s35390a", 0 },
39 { }
40};
41MODULE_DEVICE_TABLE(i2c, s35390a_id);
42
43struct s35390a {
44 struct i2c_client *client[8];
45 struct rtc_device *rtc;
46 int twentyfourhour;
47};
48
49static int s35390a_set_reg(struct s35390a *s35390a, int reg, char *buf, int len)
50{
51 struct i2c_client *client = s35390a->client[reg];
52 struct i2c_msg msg[] = {
53 { client->addr, 0, len, buf },
54 };
55
56 if ((i2c_transfer(client->adapter, msg, 1)) != 1)
57 return -EIO;
58
59 return 0;
60}
61
62static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len)
63{
64 struct i2c_client *client = s35390a->client[reg];
65 struct i2c_msg msg[] = {
66 { client->addr, I2C_M_RD, len, buf },
67 };
68
69 if ((i2c_transfer(client->adapter, msg, 1)) != 1)
70 return -EIO;
71
72 return 0;
73}
74
75static int s35390a_reset(struct s35390a *s35390a)
76{
77 char buf[1];
78
79 if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)) < 0)
80 return -EIO;
81
82 if (!(buf[0] & (S35390A_FLAG_POC | S35390A_FLAG_BLD)))
83 return 0;
84
85 buf[0] |= (S35390A_FLAG_RESET | S35390A_FLAG_24H);
86 buf[0] &= 0xf0;
87 return s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
88}
89
90static int s35390a_disable_test_mode(struct s35390a *s35390a)
91{
92 char buf[1];
93
94 if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf)) < 0)
95 return -EIO;
96
97 if (!(buf[0] & S35390A_FLAG_TEST))
98 return 0;
99
100 buf[0] &= ~S35390A_FLAG_TEST;
101 return s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf));
102}
103
104static char s35390a_hr2reg(struct s35390a *s35390a, int hour)
105{
106 if (s35390a->twentyfourhour)
107 return bin2bcd(hour);
108
109 if (hour < 12)
110 return bin2bcd(hour);
111
112 return 0x40 | bin2bcd(hour - 12);
113}
114
115static int s35390a_reg2hr(struct s35390a *s35390a, char reg)
116{
117 unsigned hour;
118
119 if (s35390a->twentyfourhour)
120 return bcd2bin(reg & 0x3f);
121
122 hour = bcd2bin(reg & 0x3f);
123 if (reg & 0x40)
124 hour += 12;
125
126 return hour;
127}
128
129static int s35390a_set_datetime(struct i2c_client *client, struct rtc_time *tm)
130{
131 struct s35390a *s35390a = i2c_get_clientdata(client);
132 int i, err;
133 char buf[7];
134
135 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d mday=%d, "
136 "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
137 tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
138 tm->tm_wday);
139
140 buf[S35390A_BYTE_YEAR] = bin2bcd(tm->tm_year - 100);
141 buf[S35390A_BYTE_MONTH] = bin2bcd(tm->tm_mon + 1);
142 buf[S35390A_BYTE_DAY] = bin2bcd(tm->tm_mday);
143 buf[S35390A_BYTE_WDAY] = bin2bcd(tm->tm_wday);
144 buf[S35390A_BYTE_HOURS] = s35390a_hr2reg(s35390a, tm->tm_hour);
145 buf[S35390A_BYTE_MINS] = bin2bcd(tm->tm_min);
146 buf[S35390A_BYTE_SECS] = bin2bcd(tm->tm_sec);
147
148 /* This chip expects the bits of each byte to be in reverse order */
149 for (i = 0; i < 7; ++i)
150 buf[i] = bitrev8(buf[i]);
151
152 err = s35390a_set_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
153
154 return err;
155}
156
157static int s35390a_get_datetime(struct i2c_client *client, struct rtc_time *tm)
158{
159 struct s35390a *s35390a = i2c_get_clientdata(client);
160 char buf[7];
161 int i, err;
162
163 err = s35390a_get_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
164 if (err < 0)
165 return err;
166
167 /* This chip returns the bits of each byte in reverse order */
168 for (i = 0; i < 7; ++i)
169 buf[i] = bitrev8(buf[i]);
170
171 tm->tm_sec = bcd2bin(buf[S35390A_BYTE_SECS]);
172 tm->tm_min = bcd2bin(buf[S35390A_BYTE_MINS]);
173 tm->tm_hour = s35390a_reg2hr(s35390a, buf[S35390A_BYTE_HOURS]);
174 tm->tm_wday = bcd2bin(buf[S35390A_BYTE_WDAY]);
175 tm->tm_mday = bcd2bin(buf[S35390A_BYTE_DAY]);
176 tm->tm_mon = bcd2bin(buf[S35390A_BYTE_MONTH]) - 1;
177 tm->tm_year = bcd2bin(buf[S35390A_BYTE_YEAR]) + 100;
178
179 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, mday=%d, "
180 "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
181 tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
182 tm->tm_wday);
183
184 return rtc_valid_tm(tm);
185}
186
187static int s35390a_rtc_read_time(struct device *dev, struct rtc_time *tm)
188{
189 return s35390a_get_datetime(to_i2c_client(dev), tm);
190}
191
192static int s35390a_rtc_set_time(struct device *dev, struct rtc_time *tm)
193{
194 return s35390a_set_datetime(to_i2c_client(dev), tm);
195}
196
197static const struct rtc_class_ops s35390a_rtc_ops = {
198 .read_time = s35390a_rtc_read_time,
199 .set_time = s35390a_rtc_set_time,
200};
201
202static struct i2c_driver s35390a_driver;
203
204static int s35390a_probe(struct i2c_client *client,
205 const struct i2c_device_id *id)
206{
207 int err;
208 unsigned int i;
209 struct s35390a *s35390a;
210 struct rtc_time tm;
211 char buf[1];
212
213 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
214 err = -ENODEV;
215 goto exit;
216 }
217
218 s35390a = kzalloc(sizeof(struct s35390a), GFP_KERNEL);
219 if (!s35390a) {
220 err = -ENOMEM;
221 goto exit;
222 }
223
224 s35390a->client[0] = client;
225 i2c_set_clientdata(client, s35390a);
226
227 /* This chip uses multiple addresses, use dummy devices for them */
228 for (i = 1; i < 8; ++i) {
229 s35390a->client[i] = i2c_new_dummy(client->adapter,
230 client->addr + i);
231 if (!s35390a->client[i]) {
232 dev_err(&client->dev, "Address %02x unavailable\n",
233 client->addr + i);
234 err = -EBUSY;
235 goto exit_dummy;
236 }
237 }
238
239 err = s35390a_reset(s35390a);
240 if (err < 0) {
241 dev_err(&client->dev, "error resetting chip\n");
242 goto exit_dummy;
243 }
244
245 err = s35390a_disable_test_mode(s35390a);
246 if (err < 0) {
247 dev_err(&client->dev, "error disabling test mode\n");
248 goto exit_dummy;
249 }
250
251 err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
252 if (err < 0) {
253 dev_err(&client->dev, "error checking 12/24 hour mode\n");
254 goto exit_dummy;
255 }
256 if (buf[0] & S35390A_FLAG_24H)
257 s35390a->twentyfourhour = 1;
258 else
259 s35390a->twentyfourhour = 0;
260
261 if (s35390a_get_datetime(client, &tm) < 0)
262 dev_warn(&client->dev, "clock needs to be set\n");
263
264 s35390a->rtc = rtc_device_register(s35390a_driver.driver.name,
265 &client->dev, &s35390a_rtc_ops, THIS_MODULE);
266
267 if (IS_ERR(s35390a->rtc)) {
268 err = PTR_ERR(s35390a->rtc);
269 goto exit_dummy;
270 }
271 return 0;
272
273exit_dummy:
274 for (i = 1; i < 8; ++i)
275 if (s35390a->client[i])
276 i2c_unregister_device(s35390a->client[i]);
277 kfree(s35390a);
278
279exit:
280 return err;
281}
282
283static int s35390a_remove(struct i2c_client *client)
284{
285 unsigned int i;
286
287 struct s35390a *s35390a = i2c_get_clientdata(client);
288 for (i = 1; i < 8; ++i)
289 if (s35390a->client[i])
290 i2c_unregister_device(s35390a->client[i]);
291
292 rtc_device_unregister(s35390a->rtc);
293 kfree(s35390a);
294
295 return 0;
296}
297
298static struct i2c_driver s35390a_driver = {
299 .driver = {
300 .name = "rtc-s35390a",
301 },
302 .probe = s35390a_probe,
303 .remove = s35390a_remove,
304 .id_table = s35390a_id,
305};
306
307module_i2c_driver(s35390a_driver);
308
309MODULE_AUTHOR("Byron Bradley <byron.bbradley@gmail.com>");
310MODULE_DESCRIPTION("S35390A RTC driver");
311MODULE_LICENSE("GPL");
1/*
2 * Seiko Instruments S-35390A RTC Driver
3 *
4 * Copyright (c) 2007 Byron Bradley
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
10 */
11
12#include <linux/module.h>
13#include <linux/rtc.h>
14#include <linux/i2c.h>
15#include <linux/bitrev.h>
16#include <linux/bcd.h>
17#include <linux/slab.h>
18#include <linux/delay.h>
19
20#define S35390A_CMD_STATUS1 0
21#define S35390A_CMD_STATUS2 1
22#define S35390A_CMD_TIME1 2
23#define S35390A_CMD_TIME2 3
24#define S35390A_CMD_INT2_REG1 5
25
26#define S35390A_BYTE_YEAR 0
27#define S35390A_BYTE_MONTH 1
28#define S35390A_BYTE_DAY 2
29#define S35390A_BYTE_WDAY 3
30#define S35390A_BYTE_HOURS 4
31#define S35390A_BYTE_MINS 5
32#define S35390A_BYTE_SECS 6
33
34#define S35390A_ALRM_BYTE_WDAY 0
35#define S35390A_ALRM_BYTE_HOURS 1
36#define S35390A_ALRM_BYTE_MINS 2
37
38/* flags for STATUS1 */
39#define S35390A_FLAG_POC 0x01
40#define S35390A_FLAG_BLD 0x02
41#define S35390A_FLAG_INT2 0x04
42#define S35390A_FLAG_24H 0x40
43#define S35390A_FLAG_RESET 0x80
44
45/* flag for STATUS2 */
46#define S35390A_FLAG_TEST 0x01
47
48#define S35390A_INT2_MODE_MASK 0xF0
49
50#define S35390A_INT2_MODE_NOINTR 0x00
51#define S35390A_INT2_MODE_FREQ 0x10
52#define S35390A_INT2_MODE_ALARM 0x40
53#define S35390A_INT2_MODE_PMIN_EDG 0x20
54
55static const struct i2c_device_id s35390a_id[] = {
56 { "s35390a", 0 },
57 { }
58};
59MODULE_DEVICE_TABLE(i2c, s35390a_id);
60
61static const struct of_device_id s35390a_of_match[] = {
62 { .compatible = "s35390a" },
63 { .compatible = "sii,s35390a" },
64 { }
65};
66MODULE_DEVICE_TABLE(of, s35390a_of_match);
67
68struct s35390a {
69 struct i2c_client *client[8];
70 struct rtc_device *rtc;
71 int twentyfourhour;
72};
73
74static int s35390a_set_reg(struct s35390a *s35390a, int reg, char *buf, int len)
75{
76 struct i2c_client *client = s35390a->client[reg];
77 struct i2c_msg msg[] = {
78 {
79 .addr = client->addr,
80 .len = len,
81 .buf = buf
82 },
83 };
84
85 if ((i2c_transfer(client->adapter, msg, 1)) != 1)
86 return -EIO;
87
88 return 0;
89}
90
91static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len)
92{
93 struct i2c_client *client = s35390a->client[reg];
94 struct i2c_msg msg[] = {
95 {
96 .addr = client->addr,
97 .flags = I2C_M_RD,
98 .len = len,
99 .buf = buf
100 },
101 };
102
103 if ((i2c_transfer(client->adapter, msg, 1)) != 1)
104 return -EIO;
105
106 return 0;
107}
108
109static int s35390a_init(struct s35390a *s35390a)
110{
111 char buf;
112 int ret;
113 unsigned initcount = 0;
114
115 /*
116 * At least one of POC and BLD are set, so reinitialise chip. Keeping
117 * this information in the hardware to know later that the time isn't
118 * valid is unfortunately not possible because POC and BLD are cleared
119 * on read. So the reset is best done now.
120 *
121 * The 24H bit is kept over reset, so set it already here.
122 */
123initialize:
124 buf = S35390A_FLAG_RESET | S35390A_FLAG_24H;
125 ret = s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, &buf, 1);
126
127 if (ret < 0)
128 return ret;
129
130 ret = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &buf, 1);
131 if (ret < 0)
132 return ret;
133
134 if (buf & (S35390A_FLAG_POC | S35390A_FLAG_BLD)) {
135 /* Try up to five times to reset the chip */
136 if (initcount < 5) {
137 ++initcount;
138 goto initialize;
139 } else
140 return -EIO;
141 }
142
143 return 1;
144}
145
146/*
147 * Returns <0 on error, 0 if rtc is setup fine and 1 if the chip was reset.
148 * To keep the information if an irq is pending, pass the value read from
149 * STATUS1 to the caller.
150 */
151static int s35390a_read_status(struct s35390a *s35390a, char *status1)
152{
153 int ret;
154
155 ret = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, status1, 1);
156 if (ret < 0)
157 return ret;
158
159 if (*status1 & S35390A_FLAG_POC) {
160 /*
161 * Do not communicate for 0.5 seconds since the power-on
162 * detection circuit is in operation.
163 */
164 msleep(500);
165 return 1;
166 } else if (*status1 & S35390A_FLAG_BLD)
167 return 1;
168 /*
169 * If both POC and BLD are unset everything is fine.
170 */
171 return 0;
172}
173
174static int s35390a_disable_test_mode(struct s35390a *s35390a)
175{
176 char buf[1];
177
178 if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf)) < 0)
179 return -EIO;
180
181 if (!(buf[0] & S35390A_FLAG_TEST))
182 return 0;
183
184 buf[0] &= ~S35390A_FLAG_TEST;
185 return s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf));
186}
187
188static char s35390a_hr2reg(struct s35390a *s35390a, int hour)
189{
190 if (s35390a->twentyfourhour)
191 return bin2bcd(hour);
192
193 if (hour < 12)
194 return bin2bcd(hour);
195
196 return 0x40 | bin2bcd(hour - 12);
197}
198
199static int s35390a_reg2hr(struct s35390a *s35390a, char reg)
200{
201 unsigned hour;
202
203 if (s35390a->twentyfourhour)
204 return bcd2bin(reg & 0x3f);
205
206 hour = bcd2bin(reg & 0x3f);
207 if (reg & 0x40)
208 hour += 12;
209
210 return hour;
211}
212
213static int s35390a_rtc_set_time(struct device *dev, struct rtc_time *tm)
214{
215 struct i2c_client *client = to_i2c_client(dev);
216 struct s35390a *s35390a = i2c_get_clientdata(client);
217 int i, err;
218 char buf[7], status;
219
220 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d mday=%d, "
221 "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
222 tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
223 tm->tm_wday);
224
225 if (s35390a_read_status(s35390a, &status) == 1)
226 s35390a_init(s35390a);
227
228 buf[S35390A_BYTE_YEAR] = bin2bcd(tm->tm_year - 100);
229 buf[S35390A_BYTE_MONTH] = bin2bcd(tm->tm_mon + 1);
230 buf[S35390A_BYTE_DAY] = bin2bcd(tm->tm_mday);
231 buf[S35390A_BYTE_WDAY] = bin2bcd(tm->tm_wday);
232 buf[S35390A_BYTE_HOURS] = s35390a_hr2reg(s35390a, tm->tm_hour);
233 buf[S35390A_BYTE_MINS] = bin2bcd(tm->tm_min);
234 buf[S35390A_BYTE_SECS] = bin2bcd(tm->tm_sec);
235
236 /* This chip expects the bits of each byte to be in reverse order */
237 for (i = 0; i < 7; ++i)
238 buf[i] = bitrev8(buf[i]);
239
240 err = s35390a_set_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
241
242 return err;
243}
244
245static int s35390a_rtc_read_time(struct device *dev, struct rtc_time *tm)
246{
247 struct i2c_client *client = to_i2c_client(dev);
248 struct s35390a *s35390a = i2c_get_clientdata(client);
249 char buf[7], status;
250 int i, err;
251
252 if (s35390a_read_status(s35390a, &status) == 1)
253 return -EINVAL;
254
255 err = s35390a_get_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
256 if (err < 0)
257 return err;
258
259 /* This chip returns the bits of each byte in reverse order */
260 for (i = 0; i < 7; ++i)
261 buf[i] = bitrev8(buf[i]);
262
263 tm->tm_sec = bcd2bin(buf[S35390A_BYTE_SECS]);
264 tm->tm_min = bcd2bin(buf[S35390A_BYTE_MINS]);
265 tm->tm_hour = s35390a_reg2hr(s35390a, buf[S35390A_BYTE_HOURS]);
266 tm->tm_wday = bcd2bin(buf[S35390A_BYTE_WDAY]);
267 tm->tm_mday = bcd2bin(buf[S35390A_BYTE_DAY]);
268 tm->tm_mon = bcd2bin(buf[S35390A_BYTE_MONTH]) - 1;
269 tm->tm_year = bcd2bin(buf[S35390A_BYTE_YEAR]) + 100;
270
271 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, mday=%d, "
272 "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
273 tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
274 tm->tm_wday);
275
276 return 0;
277}
278
279static int s35390a_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
280{
281 struct i2c_client *client = to_i2c_client(dev);
282 struct s35390a *s35390a = i2c_get_clientdata(client);
283 char buf[3], sts = 0;
284 int err, i;
285
286 dev_dbg(&client->dev, "%s: alm is secs=%d, mins=%d, hours=%d mday=%d, "\
287 "mon=%d, year=%d, wday=%d\n", __func__, alm->time.tm_sec,
288 alm->time.tm_min, alm->time.tm_hour, alm->time.tm_mday,
289 alm->time.tm_mon, alm->time.tm_year, alm->time.tm_wday);
290
291 /* disable interrupt (which deasserts the irq line) */
292 err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
293 if (err < 0)
294 return err;
295
296 /* clear pending interrupt (in STATUS1 only), if any */
297 err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &sts, sizeof(sts));
298 if (err < 0)
299 return err;
300
301 if (alm->enabled)
302 sts = S35390A_INT2_MODE_ALARM;
303 else
304 sts = S35390A_INT2_MODE_NOINTR;
305
306 /* This chip expects the bits of each byte to be in reverse order */
307 sts = bitrev8(sts);
308
309 /* set interupt mode*/
310 err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
311 if (err < 0)
312 return err;
313
314 if (alm->time.tm_wday != -1)
315 buf[S35390A_ALRM_BYTE_WDAY] = bin2bcd(alm->time.tm_wday) | 0x80;
316 else
317 buf[S35390A_ALRM_BYTE_WDAY] = 0;
318
319 buf[S35390A_ALRM_BYTE_HOURS] = s35390a_hr2reg(s35390a,
320 alm->time.tm_hour) | 0x80;
321 buf[S35390A_ALRM_BYTE_MINS] = bin2bcd(alm->time.tm_min) | 0x80;
322
323 if (alm->time.tm_hour >= 12)
324 buf[S35390A_ALRM_BYTE_HOURS] |= 0x40;
325
326 for (i = 0; i < 3; ++i)
327 buf[i] = bitrev8(buf[i]);
328
329 err = s35390a_set_reg(s35390a, S35390A_CMD_INT2_REG1, buf,
330 sizeof(buf));
331
332 return err;
333}
334
335static int s35390a_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
336{
337 struct i2c_client *client = to_i2c_client(dev);
338 struct s35390a *s35390a = i2c_get_clientdata(client);
339 char buf[3], sts;
340 int i, err;
341
342 err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
343 if (err < 0)
344 return err;
345
346 if ((bitrev8(sts) & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
347 /*
348 * When the alarm isn't enabled, the register to configure
349 * the alarm time isn't accessible.
350 */
351 alm->enabled = 0;
352 return 0;
353 } else {
354 alm->enabled = 1;
355 }
356
357 err = s35390a_get_reg(s35390a, S35390A_CMD_INT2_REG1, buf, sizeof(buf));
358 if (err < 0)
359 return err;
360
361 /* This chip returns the bits of each byte in reverse order */
362 for (i = 0; i < 3; ++i)
363 buf[i] = bitrev8(buf[i]);
364
365 /*
366 * B0 of the three matching registers is an enable flag. Iff it is set
367 * the configured value is used for matching.
368 */
369 if (buf[S35390A_ALRM_BYTE_WDAY] & 0x80)
370 alm->time.tm_wday =
371 bcd2bin(buf[S35390A_ALRM_BYTE_WDAY] & ~0x80);
372
373 if (buf[S35390A_ALRM_BYTE_HOURS] & 0x80)
374 alm->time.tm_hour =
375 s35390a_reg2hr(s35390a,
376 buf[S35390A_ALRM_BYTE_HOURS] & ~0x80);
377
378 if (buf[S35390A_ALRM_BYTE_MINS] & 0x80)
379 alm->time.tm_min = bcd2bin(buf[S35390A_ALRM_BYTE_MINS] & ~0x80);
380
381 /* alarm triggers always at s=0 */
382 alm->time.tm_sec = 0;
383
384 dev_dbg(&client->dev, "%s: alm is mins=%d, hours=%d, wday=%d\n",
385 __func__, alm->time.tm_min, alm->time.tm_hour,
386 alm->time.tm_wday);
387
388 return 0;
389}
390
391static int s35390a_rtc_ioctl(struct device *dev, unsigned int cmd,
392 unsigned long arg)
393{
394 struct i2c_client *client = to_i2c_client(dev);
395 struct s35390a *s35390a = i2c_get_clientdata(client);
396 char sts;
397 int err;
398
399 switch (cmd) {
400 case RTC_VL_READ:
401 /* s35390a_reset set lowvoltage flag and init RTC if needed */
402 err = s35390a_read_status(s35390a, &sts);
403 if (err < 0)
404 return err;
405 if (copy_to_user((void __user *)arg, &err, sizeof(int)))
406 return -EFAULT;
407 break;
408 case RTC_VL_CLR:
409 /* update flag and clear register */
410 err = s35390a_init(s35390a);
411 if (err < 0)
412 return err;
413 break;
414 default:
415 return -ENOIOCTLCMD;
416 }
417
418 return 0;
419}
420
421static const struct rtc_class_ops s35390a_rtc_ops = {
422 .read_time = s35390a_rtc_read_time,
423 .set_time = s35390a_rtc_set_time,
424 .set_alarm = s35390a_rtc_set_alarm,
425 .read_alarm = s35390a_rtc_read_alarm,
426 .ioctl = s35390a_rtc_ioctl,
427};
428
429static struct i2c_driver s35390a_driver;
430
431static int s35390a_probe(struct i2c_client *client,
432 const struct i2c_device_id *id)
433{
434 int err, err_read;
435 unsigned int i;
436 struct s35390a *s35390a;
437 char buf, status1;
438
439 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
440 err = -ENODEV;
441 goto exit;
442 }
443
444 s35390a = devm_kzalloc(&client->dev, sizeof(struct s35390a),
445 GFP_KERNEL);
446 if (!s35390a) {
447 err = -ENOMEM;
448 goto exit;
449 }
450
451 s35390a->client[0] = client;
452 i2c_set_clientdata(client, s35390a);
453
454 /* This chip uses multiple addresses, use dummy devices for them */
455 for (i = 1; i < 8; ++i) {
456 s35390a->client[i] = i2c_new_dummy(client->adapter,
457 client->addr + i);
458 if (!s35390a->client[i]) {
459 dev_err(&client->dev, "Address %02x unavailable\n",
460 client->addr + i);
461 err = -EBUSY;
462 goto exit_dummy;
463 }
464 }
465
466 err_read = s35390a_read_status(s35390a, &status1);
467 if (err_read < 0) {
468 err = err_read;
469 dev_err(&client->dev, "error resetting chip\n");
470 goto exit_dummy;
471 }
472
473 if (status1 & S35390A_FLAG_24H)
474 s35390a->twentyfourhour = 1;
475 else
476 s35390a->twentyfourhour = 0;
477
478 if (status1 & S35390A_FLAG_INT2) {
479 /* disable alarm (and maybe test mode) */
480 buf = 0;
481 err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &buf, 1);
482 if (err < 0) {
483 dev_err(&client->dev, "error disabling alarm");
484 goto exit_dummy;
485 }
486 } else {
487 err = s35390a_disable_test_mode(s35390a);
488 if (err < 0) {
489 dev_err(&client->dev, "error disabling test mode\n");
490 goto exit_dummy;
491 }
492 }
493
494 device_set_wakeup_capable(&client->dev, 1);
495
496 s35390a->rtc = devm_rtc_device_register(&client->dev,
497 s35390a_driver.driver.name,
498 &s35390a_rtc_ops, THIS_MODULE);
499
500 if (IS_ERR(s35390a->rtc)) {
501 err = PTR_ERR(s35390a->rtc);
502 goto exit_dummy;
503 }
504
505 if (status1 & S35390A_FLAG_INT2)
506 rtc_update_irq(s35390a->rtc, 1, RTC_AF);
507
508 return 0;
509
510exit_dummy:
511 for (i = 1; i < 8; ++i)
512 if (s35390a->client[i])
513 i2c_unregister_device(s35390a->client[i]);
514
515exit:
516 return err;
517}
518
519static int s35390a_remove(struct i2c_client *client)
520{
521 unsigned int i;
522 struct s35390a *s35390a = i2c_get_clientdata(client);
523
524 for (i = 1; i < 8; ++i)
525 if (s35390a->client[i])
526 i2c_unregister_device(s35390a->client[i]);
527
528 return 0;
529}
530
531static struct i2c_driver s35390a_driver = {
532 .driver = {
533 .name = "rtc-s35390a",
534 .of_match_table = of_match_ptr(s35390a_of_match),
535 },
536 .probe = s35390a_probe,
537 .remove = s35390a_remove,
538 .id_table = s35390a_id,
539};
540
541module_i2c_driver(s35390a_driver);
542
543MODULE_AUTHOR("Byron Bradley <byron.bbradley@gmail.com>");
544MODULE_DESCRIPTION("S35390A RTC driver");
545MODULE_LICENSE("GPL");