Loading...
1/******************************************************************************
2 *
3 * Module Name: dsopcode - Dispatcher suport for regions and fields
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2012, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acparser.h"
47#include "amlcode.h"
48#include "acdispat.h"
49#include "acinterp.h"
50#include "acnamesp.h"
51#include "acevents.h"
52#include "actables.h"
53
54#define _COMPONENT ACPI_DISPATCHER
55ACPI_MODULE_NAME("dsopcode")
56
57/* Local prototypes */
58static acpi_status
59acpi_ds_init_buffer_field(u16 aml_opcode,
60 union acpi_operand_object *obj_desc,
61 union acpi_operand_object *buffer_desc,
62 union acpi_operand_object *offset_desc,
63 union acpi_operand_object *length_desc,
64 union acpi_operand_object *result_desc);
65
66/*******************************************************************************
67 *
68 * FUNCTION: acpi_ds_initialize_region
69 *
70 * PARAMETERS: obj_handle - Region namespace node
71 *
72 * RETURN: Status
73 *
74 * DESCRIPTION: Front end to ev_initialize_region
75 *
76 ******************************************************************************/
77
78acpi_status acpi_ds_initialize_region(acpi_handle obj_handle)
79{
80 union acpi_operand_object *obj_desc;
81 acpi_status status;
82
83 obj_desc = acpi_ns_get_attached_object(obj_handle);
84
85 /* Namespace is NOT locked */
86
87 status = acpi_ev_initialize_region(obj_desc, FALSE);
88 return (status);
89}
90
91/*******************************************************************************
92 *
93 * FUNCTION: acpi_ds_init_buffer_field
94 *
95 * PARAMETERS: aml_opcode - create_xxx_field
96 * obj_desc - buffer_field object
97 * buffer_desc - Host Buffer
98 * offset_desc - Offset into buffer
99 * length_desc - Length of field (CREATE_FIELD_OP only)
100 * result_desc - Where to store the result
101 *
102 * RETURN: Status
103 *
104 * DESCRIPTION: Perform actual initialization of a buffer field
105 *
106 ******************************************************************************/
107
108static acpi_status
109acpi_ds_init_buffer_field(u16 aml_opcode,
110 union acpi_operand_object *obj_desc,
111 union acpi_operand_object *buffer_desc,
112 union acpi_operand_object *offset_desc,
113 union acpi_operand_object *length_desc,
114 union acpi_operand_object *result_desc)
115{
116 u32 offset;
117 u32 bit_offset;
118 u32 bit_count;
119 u8 field_flags;
120 acpi_status status;
121
122 ACPI_FUNCTION_TRACE_PTR(ds_init_buffer_field, obj_desc);
123
124 /* Host object must be a Buffer */
125
126 if (buffer_desc->common.type != ACPI_TYPE_BUFFER) {
127 ACPI_ERROR((AE_INFO,
128 "Target of Create Field is not a Buffer object - %s",
129 acpi_ut_get_object_type_name(buffer_desc)));
130
131 status = AE_AML_OPERAND_TYPE;
132 goto cleanup;
133 }
134
135 /*
136 * The last parameter to all of these opcodes (result_desc) started
137 * out as a name_string, and should therefore now be a NS node
138 * after resolution in acpi_ex_resolve_operands().
139 */
140 if (ACPI_GET_DESCRIPTOR_TYPE(result_desc) != ACPI_DESC_TYPE_NAMED) {
141 ACPI_ERROR((AE_INFO,
142 "(%s) destination not a NS Node [%s]",
143 acpi_ps_get_opcode_name(aml_opcode),
144 acpi_ut_get_descriptor_name(result_desc)));
145
146 status = AE_AML_OPERAND_TYPE;
147 goto cleanup;
148 }
149
150 offset = (u32) offset_desc->integer.value;
151
152 /*
153 * Setup the Bit offsets and counts, according to the opcode
154 */
155 switch (aml_opcode) {
156 case AML_CREATE_FIELD_OP:
157
158 /* Offset is in bits, count is in bits */
159
160 field_flags = AML_FIELD_ACCESS_BYTE;
161 bit_offset = offset;
162 bit_count = (u32) length_desc->integer.value;
163
164 /* Must have a valid (>0) bit count */
165
166 if (bit_count == 0) {
167 ACPI_ERROR((AE_INFO,
168 "Attempt to CreateField of length zero"));
169 status = AE_AML_OPERAND_VALUE;
170 goto cleanup;
171 }
172 break;
173
174 case AML_CREATE_BIT_FIELD_OP:
175
176 /* Offset is in bits, Field is one bit */
177
178 bit_offset = offset;
179 bit_count = 1;
180 field_flags = AML_FIELD_ACCESS_BYTE;
181 break;
182
183 case AML_CREATE_BYTE_FIELD_OP:
184
185 /* Offset is in bytes, field is one byte */
186
187 bit_offset = 8 * offset;
188 bit_count = 8;
189 field_flags = AML_FIELD_ACCESS_BYTE;
190 break;
191
192 case AML_CREATE_WORD_FIELD_OP:
193
194 /* Offset is in bytes, field is one word */
195
196 bit_offset = 8 * offset;
197 bit_count = 16;
198 field_flags = AML_FIELD_ACCESS_WORD;
199 break;
200
201 case AML_CREATE_DWORD_FIELD_OP:
202
203 /* Offset is in bytes, field is one dword */
204
205 bit_offset = 8 * offset;
206 bit_count = 32;
207 field_flags = AML_FIELD_ACCESS_DWORD;
208 break;
209
210 case AML_CREATE_QWORD_FIELD_OP:
211
212 /* Offset is in bytes, field is one qword */
213
214 bit_offset = 8 * offset;
215 bit_count = 64;
216 field_flags = AML_FIELD_ACCESS_QWORD;
217 break;
218
219 default:
220
221 ACPI_ERROR((AE_INFO,
222 "Unknown field creation opcode 0x%02X",
223 aml_opcode));
224 status = AE_AML_BAD_OPCODE;
225 goto cleanup;
226 }
227
228 /* Entire field must fit within the current length of the buffer */
229
230 if ((bit_offset + bit_count) > (8 * (u32) buffer_desc->buffer.length)) {
231 ACPI_ERROR((AE_INFO,
232 "Field [%4.4s] at %u exceeds Buffer [%4.4s] size %u (bits)",
233 acpi_ut_get_node_name(result_desc),
234 bit_offset + bit_count,
235 acpi_ut_get_node_name(buffer_desc->buffer.node),
236 8 * (u32) buffer_desc->buffer.length));
237 status = AE_AML_BUFFER_LIMIT;
238 goto cleanup;
239 }
240
241 /*
242 * Initialize areas of the field object that are common to all fields
243 * For field_flags, use LOCK_RULE = 0 (NO_LOCK),
244 * UPDATE_RULE = 0 (UPDATE_PRESERVE)
245 */
246 status = acpi_ex_prep_common_field_object(obj_desc, field_flags, 0,
247 bit_offset, bit_count);
248 if (ACPI_FAILURE(status)) {
249 goto cleanup;
250 }
251
252 obj_desc->buffer_field.buffer_obj = buffer_desc;
253
254 /* Reference count for buffer_desc inherits obj_desc count */
255
256 buffer_desc->common.reference_count = (u16)
257 (buffer_desc->common.reference_count +
258 obj_desc->common.reference_count);
259
260 cleanup:
261
262 /* Always delete the operands */
263
264 acpi_ut_remove_reference(offset_desc);
265 acpi_ut_remove_reference(buffer_desc);
266
267 if (aml_opcode == AML_CREATE_FIELD_OP) {
268 acpi_ut_remove_reference(length_desc);
269 }
270
271 /* On failure, delete the result descriptor */
272
273 if (ACPI_FAILURE(status)) {
274 acpi_ut_remove_reference(result_desc); /* Result descriptor */
275 } else {
276 /* Now the address and length are valid for this buffer_field */
277
278 obj_desc->buffer_field.flags |= AOPOBJ_DATA_VALID;
279 }
280
281 return_ACPI_STATUS(status);
282}
283
284/*******************************************************************************
285 *
286 * FUNCTION: acpi_ds_eval_buffer_field_operands
287 *
288 * PARAMETERS: walk_state - Current walk
289 * Op - A valid buffer_field Op object
290 *
291 * RETURN: Status
292 *
293 * DESCRIPTION: Get buffer_field Buffer and Index
294 * Called from acpi_ds_exec_end_op during buffer_field parse tree walk
295 *
296 ******************************************************************************/
297
298acpi_status
299acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state,
300 union acpi_parse_object *op)
301{
302 acpi_status status;
303 union acpi_operand_object *obj_desc;
304 struct acpi_namespace_node *node;
305 union acpi_parse_object *next_op;
306
307 ACPI_FUNCTION_TRACE_PTR(ds_eval_buffer_field_operands, op);
308
309 /*
310 * This is where we evaluate the address and length fields of the
311 * create_xxx_field declaration
312 */
313 node = op->common.node;
314
315 /* next_op points to the op that holds the Buffer */
316
317 next_op = op->common.value.arg;
318
319 /* Evaluate/create the address and length operands */
320
321 status = acpi_ds_create_operands(walk_state, next_op);
322 if (ACPI_FAILURE(status)) {
323 return_ACPI_STATUS(status);
324 }
325
326 obj_desc = acpi_ns_get_attached_object(node);
327 if (!obj_desc) {
328 return_ACPI_STATUS(AE_NOT_EXIST);
329 }
330
331 /* Resolve the operands */
332
333 status = acpi_ex_resolve_operands(op->common.aml_opcode,
334 ACPI_WALK_OPERANDS, walk_state);
335 if (ACPI_FAILURE(status)) {
336 ACPI_ERROR((AE_INFO, "(%s) bad operand(s), status 0x%X",
337 acpi_ps_get_opcode_name(op->common.aml_opcode),
338 status));
339
340 return_ACPI_STATUS(status);
341 }
342
343 /* Initialize the Buffer Field */
344
345 if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
346
347 /* NOTE: Slightly different operands for this opcode */
348
349 status =
350 acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
351 walk_state->operands[0],
352 walk_state->operands[1],
353 walk_state->operands[2],
354 walk_state->operands[3]);
355 } else {
356 /* All other, create_xxx_field opcodes */
357
358 status =
359 acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
360 walk_state->operands[0],
361 walk_state->operands[1], NULL,
362 walk_state->operands[2]);
363 }
364
365 return_ACPI_STATUS(status);
366}
367
368/*******************************************************************************
369 *
370 * FUNCTION: acpi_ds_eval_region_operands
371 *
372 * PARAMETERS: walk_state - Current walk
373 * Op - A valid region Op object
374 *
375 * RETURN: Status
376 *
377 * DESCRIPTION: Get region address and length
378 * Called from acpi_ds_exec_end_op during op_region parse tree walk
379 *
380 ******************************************************************************/
381
382acpi_status
383acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state,
384 union acpi_parse_object *op)
385{
386 acpi_status status;
387 union acpi_operand_object *obj_desc;
388 union acpi_operand_object *operand_desc;
389 struct acpi_namespace_node *node;
390 union acpi_parse_object *next_op;
391
392 ACPI_FUNCTION_TRACE_PTR(ds_eval_region_operands, op);
393
394 /*
395 * This is where we evaluate the address and length fields of the
396 * op_region declaration
397 */
398 node = op->common.node;
399
400 /* next_op points to the op that holds the space_iD */
401
402 next_op = op->common.value.arg;
403
404 /* next_op points to address op */
405
406 next_op = next_op->common.next;
407
408 /* Evaluate/create the address and length operands */
409
410 status = acpi_ds_create_operands(walk_state, next_op);
411 if (ACPI_FAILURE(status)) {
412 return_ACPI_STATUS(status);
413 }
414
415 /* Resolve the length and address operands to numbers */
416
417 status = acpi_ex_resolve_operands(op->common.aml_opcode,
418 ACPI_WALK_OPERANDS, walk_state);
419 if (ACPI_FAILURE(status)) {
420 return_ACPI_STATUS(status);
421 }
422
423 obj_desc = acpi_ns_get_attached_object(node);
424 if (!obj_desc) {
425 return_ACPI_STATUS(AE_NOT_EXIST);
426 }
427
428 /*
429 * Get the length operand and save it
430 * (at Top of stack)
431 */
432 operand_desc = walk_state->operands[walk_state->num_operands - 1];
433
434 obj_desc->region.length = (u32) operand_desc->integer.value;
435 acpi_ut_remove_reference(operand_desc);
436
437 /*
438 * Get the address and save it
439 * (at top of stack - 1)
440 */
441 operand_desc = walk_state->operands[walk_state->num_operands - 2];
442
443 obj_desc->region.address = (acpi_physical_address)
444 operand_desc->integer.value;
445 acpi_ut_remove_reference(operand_desc);
446
447 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
448 obj_desc,
449 ACPI_FORMAT_NATIVE_UINT(obj_desc->region.address),
450 obj_desc->region.length));
451
452 /* Now the address and length are valid for this opregion */
453
454 obj_desc->region.flags |= AOPOBJ_DATA_VALID;
455
456 return_ACPI_STATUS(status);
457}
458
459/*******************************************************************************
460 *
461 * FUNCTION: acpi_ds_eval_table_region_operands
462 *
463 * PARAMETERS: walk_state - Current walk
464 * Op - A valid region Op object
465 *
466 * RETURN: Status
467 *
468 * DESCRIPTION: Get region address and length.
469 * Called from acpi_ds_exec_end_op during data_table_region parse
470 * tree walk.
471 *
472 ******************************************************************************/
473
474acpi_status
475acpi_ds_eval_table_region_operands(struct acpi_walk_state *walk_state,
476 union acpi_parse_object *op)
477{
478 acpi_status status;
479 union acpi_operand_object *obj_desc;
480 union acpi_operand_object **operand;
481 struct acpi_namespace_node *node;
482 union acpi_parse_object *next_op;
483 u32 table_index;
484 struct acpi_table_header *table;
485
486 ACPI_FUNCTION_TRACE_PTR(ds_eval_table_region_operands, op);
487
488 /*
489 * This is where we evaluate the signature_string and oem_iDString
490 * and oem_table_iDString of the data_table_region declaration
491 */
492 node = op->common.node;
493
494 /* next_op points to signature_string op */
495
496 next_op = op->common.value.arg;
497
498 /*
499 * Evaluate/create the signature_string and oem_iDString
500 * and oem_table_iDString operands
501 */
502 status = acpi_ds_create_operands(walk_state, next_op);
503 if (ACPI_FAILURE(status)) {
504 return_ACPI_STATUS(status);
505 }
506
507 /*
508 * Resolve the signature_string and oem_iDString
509 * and oem_table_iDString operands
510 */
511 status = acpi_ex_resolve_operands(op->common.aml_opcode,
512 ACPI_WALK_OPERANDS, walk_state);
513 if (ACPI_FAILURE(status)) {
514 return_ACPI_STATUS(status);
515 }
516
517 operand = &walk_state->operands[0];
518
519 /* Find the ACPI table */
520
521 status = acpi_tb_find_table(operand[0]->string.pointer,
522 operand[1]->string.pointer,
523 operand[2]->string.pointer, &table_index);
524 if (ACPI_FAILURE(status)) {
525 return_ACPI_STATUS(status);
526 }
527
528 acpi_ut_remove_reference(operand[0]);
529 acpi_ut_remove_reference(operand[1]);
530 acpi_ut_remove_reference(operand[2]);
531
532 status = acpi_get_table_by_index(table_index, &table);
533 if (ACPI_FAILURE(status)) {
534 return_ACPI_STATUS(status);
535 }
536
537 obj_desc = acpi_ns_get_attached_object(node);
538 if (!obj_desc) {
539 return_ACPI_STATUS(AE_NOT_EXIST);
540 }
541
542 obj_desc->region.address =
543 (acpi_physical_address) ACPI_TO_INTEGER(table);
544 obj_desc->region.length = table->length;
545
546 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
547 obj_desc,
548 ACPI_FORMAT_NATIVE_UINT(obj_desc->region.address),
549 obj_desc->region.length));
550
551 /* Now the address and length are valid for this opregion */
552
553 obj_desc->region.flags |= AOPOBJ_DATA_VALID;
554
555 return_ACPI_STATUS(status);
556}
557
558/*******************************************************************************
559 *
560 * FUNCTION: acpi_ds_eval_data_object_operands
561 *
562 * PARAMETERS: walk_state - Current walk
563 * Op - A valid data_object Op object
564 * obj_desc - data_object
565 *
566 * RETURN: Status
567 *
568 * DESCRIPTION: Get the operands and complete the following data object types:
569 * Buffer, Package.
570 *
571 ******************************************************************************/
572
573acpi_status
574acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state,
575 union acpi_parse_object *op,
576 union acpi_operand_object *obj_desc)
577{
578 acpi_status status;
579 union acpi_operand_object *arg_desc;
580 u32 length;
581
582 ACPI_FUNCTION_TRACE(ds_eval_data_object_operands);
583
584 /* The first operand (for all of these data objects) is the length */
585
586 /*
587 * Set proper index into operand stack for acpi_ds_obj_stack_push
588 * invoked inside acpi_ds_create_operand.
589 */
590 walk_state->operand_index = walk_state->num_operands;
591
592 status = acpi_ds_create_operand(walk_state, op->common.value.arg, 1);
593 if (ACPI_FAILURE(status)) {
594 return_ACPI_STATUS(status);
595 }
596
597 status = acpi_ex_resolve_operands(walk_state->opcode,
598 &(walk_state->
599 operands[walk_state->num_operands -
600 1]), walk_state);
601 if (ACPI_FAILURE(status)) {
602 return_ACPI_STATUS(status);
603 }
604
605 /* Extract length operand */
606
607 arg_desc = walk_state->operands[walk_state->num_operands - 1];
608 length = (u32) arg_desc->integer.value;
609
610 /* Cleanup for length operand */
611
612 status = acpi_ds_obj_stack_pop(1, walk_state);
613 if (ACPI_FAILURE(status)) {
614 return_ACPI_STATUS(status);
615 }
616
617 acpi_ut_remove_reference(arg_desc);
618
619 /*
620 * Create the actual data object
621 */
622 switch (op->common.aml_opcode) {
623 case AML_BUFFER_OP:
624
625 status =
626 acpi_ds_build_internal_buffer_obj(walk_state, op, length,
627 &obj_desc);
628 break;
629
630 case AML_PACKAGE_OP:
631 case AML_VAR_PACKAGE_OP:
632
633 status =
634 acpi_ds_build_internal_package_obj(walk_state, op, length,
635 &obj_desc);
636 break;
637
638 default:
639 return_ACPI_STATUS(AE_AML_BAD_OPCODE);
640 }
641
642 if (ACPI_SUCCESS(status)) {
643 /*
644 * Return the object in the walk_state, unless the parent is a package -
645 * in this case, the return object will be stored in the parse tree
646 * for the package.
647 */
648 if ((!op->common.parent) ||
649 ((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
650 (op->common.parent->common.aml_opcode !=
651 AML_VAR_PACKAGE_OP)
652 && (op->common.parent->common.aml_opcode != AML_NAME_OP))) {
653 walk_state->result_obj = obj_desc;
654 }
655 }
656
657 return_ACPI_STATUS(status);
658}
659
660/*******************************************************************************
661 *
662 * FUNCTION: acpi_ds_eval_bank_field_operands
663 *
664 * PARAMETERS: walk_state - Current walk
665 * Op - A valid bank_field Op object
666 *
667 * RETURN: Status
668 *
669 * DESCRIPTION: Get bank_field bank_value
670 * Called from acpi_ds_exec_end_op during bank_field parse tree walk
671 *
672 ******************************************************************************/
673
674acpi_status
675acpi_ds_eval_bank_field_operands(struct acpi_walk_state *walk_state,
676 union acpi_parse_object *op)
677{
678 acpi_status status;
679 union acpi_operand_object *obj_desc;
680 union acpi_operand_object *operand_desc;
681 struct acpi_namespace_node *node;
682 union acpi_parse_object *next_op;
683 union acpi_parse_object *arg;
684
685 ACPI_FUNCTION_TRACE_PTR(ds_eval_bank_field_operands, op);
686
687 /*
688 * This is where we evaluate the bank_value field of the
689 * bank_field declaration
690 */
691
692 /* next_op points to the op that holds the Region */
693
694 next_op = op->common.value.arg;
695
696 /* next_op points to the op that holds the Bank Register */
697
698 next_op = next_op->common.next;
699
700 /* next_op points to the op that holds the Bank Value */
701
702 next_op = next_op->common.next;
703
704 /*
705 * Set proper index into operand stack for acpi_ds_obj_stack_push
706 * invoked inside acpi_ds_create_operand.
707 *
708 * We use walk_state->Operands[0] to store the evaluated bank_value
709 */
710 walk_state->operand_index = 0;
711
712 status = acpi_ds_create_operand(walk_state, next_op, 0);
713 if (ACPI_FAILURE(status)) {
714 return_ACPI_STATUS(status);
715 }
716
717 status = acpi_ex_resolve_to_value(&walk_state->operands[0], walk_state);
718 if (ACPI_FAILURE(status)) {
719 return_ACPI_STATUS(status);
720 }
721
722 ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS,
723 acpi_ps_get_opcode_name(op->common.aml_opcode), 1);
724 /*
725 * Get the bank_value operand and save it
726 * (at Top of stack)
727 */
728 operand_desc = walk_state->operands[0];
729
730 /* Arg points to the start Bank Field */
731
732 arg = acpi_ps_get_arg(op, 4);
733 while (arg) {
734
735 /* Ignore OFFSET and ACCESSAS terms here */
736
737 if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
738 node = arg->common.node;
739
740 obj_desc = acpi_ns_get_attached_object(node);
741 if (!obj_desc) {
742 return_ACPI_STATUS(AE_NOT_EXIST);
743 }
744
745 obj_desc->bank_field.value =
746 (u32) operand_desc->integer.value;
747 }
748
749 /* Move to next field in the list */
750
751 arg = arg->common.next;
752 }
753
754 acpi_ut_remove_reference(operand_desc);
755 return_ACPI_STATUS(status);
756}
1// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
2/******************************************************************************
3 *
4 * Module Name: dsopcode - Dispatcher support for regions and fields
5 *
6 * Copyright (C) 2000 - 2018, Intel Corp.
7 *
8 *****************************************************************************/
9
10#include <acpi/acpi.h>
11#include "accommon.h"
12#include "acparser.h"
13#include "amlcode.h"
14#include "acdispat.h"
15#include "acinterp.h"
16#include "acnamesp.h"
17#include "acevents.h"
18#include "actables.h"
19
20#define _COMPONENT ACPI_DISPATCHER
21ACPI_MODULE_NAME("dsopcode")
22
23/* Local prototypes */
24static acpi_status
25acpi_ds_init_buffer_field(u16 aml_opcode,
26 union acpi_operand_object *obj_desc,
27 union acpi_operand_object *buffer_desc,
28 union acpi_operand_object *offset_desc,
29 union acpi_operand_object *length_desc,
30 union acpi_operand_object *result_desc);
31
32/*******************************************************************************
33 *
34 * FUNCTION: acpi_ds_initialize_region
35 *
36 * PARAMETERS: obj_handle - Region namespace node
37 *
38 * RETURN: Status
39 *
40 * DESCRIPTION: Front end to ev_initialize_region
41 *
42 ******************************************************************************/
43
44acpi_status acpi_ds_initialize_region(acpi_handle obj_handle)
45{
46 union acpi_operand_object *obj_desc;
47 acpi_status status;
48
49 obj_desc = acpi_ns_get_attached_object(obj_handle);
50
51 /* Namespace is NOT locked */
52
53 status = acpi_ev_initialize_region(obj_desc);
54 return (status);
55}
56
57/*******************************************************************************
58 *
59 * FUNCTION: acpi_ds_init_buffer_field
60 *
61 * PARAMETERS: aml_opcode - create_xxx_field
62 * obj_desc - buffer_field object
63 * buffer_desc - Host Buffer
64 * offset_desc - Offset into buffer
65 * length_desc - Length of field (CREATE_FIELD_OP only)
66 * result_desc - Where to store the result
67 *
68 * RETURN: Status
69 *
70 * DESCRIPTION: Perform actual initialization of a buffer field
71 *
72 ******************************************************************************/
73
74static acpi_status
75acpi_ds_init_buffer_field(u16 aml_opcode,
76 union acpi_operand_object *obj_desc,
77 union acpi_operand_object *buffer_desc,
78 union acpi_operand_object *offset_desc,
79 union acpi_operand_object *length_desc,
80 union acpi_operand_object *result_desc)
81{
82 u32 offset;
83 u32 bit_offset;
84 u32 bit_count;
85 u8 field_flags;
86 acpi_status status;
87
88 ACPI_FUNCTION_TRACE_PTR(ds_init_buffer_field, obj_desc);
89
90 /* Host object must be a Buffer */
91
92 if (buffer_desc->common.type != ACPI_TYPE_BUFFER) {
93 ACPI_ERROR((AE_INFO,
94 "Target of Create Field is not a Buffer object - %s",
95 acpi_ut_get_object_type_name(buffer_desc)));
96
97 status = AE_AML_OPERAND_TYPE;
98 goto cleanup;
99 }
100
101 /*
102 * The last parameter to all of these opcodes (result_desc) started
103 * out as a name_string, and should therefore now be a NS node
104 * after resolution in acpi_ex_resolve_operands().
105 */
106 if (ACPI_GET_DESCRIPTOR_TYPE(result_desc) != ACPI_DESC_TYPE_NAMED) {
107 ACPI_ERROR((AE_INFO,
108 "(%s) destination not a NS Node [%s]",
109 acpi_ps_get_opcode_name(aml_opcode),
110 acpi_ut_get_descriptor_name(result_desc)));
111
112 status = AE_AML_OPERAND_TYPE;
113 goto cleanup;
114 }
115
116 offset = (u32) offset_desc->integer.value;
117
118 /*
119 * Setup the Bit offsets and counts, according to the opcode
120 */
121 switch (aml_opcode) {
122 case AML_CREATE_FIELD_OP:
123
124 /* Offset is in bits, count is in bits */
125
126 field_flags = AML_FIELD_ACCESS_BYTE;
127 bit_offset = offset;
128 bit_count = (u32) length_desc->integer.value;
129
130 /* Must have a valid (>0) bit count */
131
132 if (bit_count == 0) {
133 ACPI_ERROR((AE_INFO,
134 "Attempt to CreateField of length zero"));
135 status = AE_AML_OPERAND_VALUE;
136 goto cleanup;
137 }
138 break;
139
140 case AML_CREATE_BIT_FIELD_OP:
141
142 /* Offset is in bits, Field is one bit */
143
144 bit_offset = offset;
145 bit_count = 1;
146 field_flags = AML_FIELD_ACCESS_BYTE;
147 break;
148
149 case AML_CREATE_BYTE_FIELD_OP:
150
151 /* Offset is in bytes, field is one byte */
152
153 bit_offset = 8 * offset;
154 bit_count = 8;
155 field_flags = AML_FIELD_ACCESS_BYTE;
156 break;
157
158 case AML_CREATE_WORD_FIELD_OP:
159
160 /* Offset is in bytes, field is one word */
161
162 bit_offset = 8 * offset;
163 bit_count = 16;
164 field_flags = AML_FIELD_ACCESS_WORD;
165 break;
166
167 case AML_CREATE_DWORD_FIELD_OP:
168
169 /* Offset is in bytes, field is one dword */
170
171 bit_offset = 8 * offset;
172 bit_count = 32;
173 field_flags = AML_FIELD_ACCESS_DWORD;
174 break;
175
176 case AML_CREATE_QWORD_FIELD_OP:
177
178 /* Offset is in bytes, field is one qword */
179
180 bit_offset = 8 * offset;
181 bit_count = 64;
182 field_flags = AML_FIELD_ACCESS_QWORD;
183 break;
184
185 default:
186
187 ACPI_ERROR((AE_INFO,
188 "Unknown field creation opcode 0x%02X",
189 aml_opcode));
190 status = AE_AML_BAD_OPCODE;
191 goto cleanup;
192 }
193
194 /* Entire field must fit within the current length of the buffer */
195
196 if ((bit_offset + bit_count) > (8 * (u32)buffer_desc->buffer.length)) {
197 ACPI_ERROR((AE_INFO,
198 "Field [%4.4s] at bit offset/length %u/%u "
199 "exceeds size of target Buffer (%u bits)",
200 acpi_ut_get_node_name(result_desc), bit_offset,
201 bit_count, 8 * (u32)buffer_desc->buffer.length));
202 status = AE_AML_BUFFER_LIMIT;
203 goto cleanup;
204 }
205
206 /*
207 * Initialize areas of the field object that are common to all fields
208 * For field_flags, use LOCK_RULE = 0 (NO_LOCK),
209 * UPDATE_RULE = 0 (UPDATE_PRESERVE)
210 */
211 status =
212 acpi_ex_prep_common_field_object(obj_desc, field_flags, 0,
213 bit_offset, bit_count);
214 if (ACPI_FAILURE(status)) {
215 goto cleanup;
216 }
217
218 obj_desc->buffer_field.buffer_obj = buffer_desc;
219
220 /* Reference count for buffer_desc inherits obj_desc count */
221
222 buffer_desc->common.reference_count = (u16)
223 (buffer_desc->common.reference_count +
224 obj_desc->common.reference_count);
225
226cleanup:
227
228 /* Always delete the operands */
229
230 acpi_ut_remove_reference(offset_desc);
231 acpi_ut_remove_reference(buffer_desc);
232
233 if (aml_opcode == AML_CREATE_FIELD_OP) {
234 acpi_ut_remove_reference(length_desc);
235 }
236
237 /* On failure, delete the result descriptor */
238
239 if (ACPI_FAILURE(status)) {
240 acpi_ut_remove_reference(result_desc); /* Result descriptor */
241 } else {
242 /* Now the address and length are valid for this buffer_field */
243
244 obj_desc->buffer_field.flags |= AOPOBJ_DATA_VALID;
245 }
246
247 return_ACPI_STATUS(status);
248}
249
250/*******************************************************************************
251 *
252 * FUNCTION: acpi_ds_eval_buffer_field_operands
253 *
254 * PARAMETERS: walk_state - Current walk
255 * op - A valid buffer_field Op object
256 *
257 * RETURN: Status
258 *
259 * DESCRIPTION: Get buffer_field Buffer and Index
260 * Called from acpi_ds_exec_end_op during buffer_field parse tree walk
261 *
262 ******************************************************************************/
263
264acpi_status
265acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state,
266 union acpi_parse_object *op)
267{
268 acpi_status status;
269 union acpi_operand_object *obj_desc;
270 struct acpi_namespace_node *node;
271 union acpi_parse_object *next_op;
272
273 ACPI_FUNCTION_TRACE_PTR(ds_eval_buffer_field_operands, op);
274
275 /*
276 * This is where we evaluate the address and length fields of the
277 * create_xxx_field declaration
278 */
279 node = op->common.node;
280
281 /* next_op points to the op that holds the Buffer */
282
283 next_op = op->common.value.arg;
284
285 /* Evaluate/create the address and length operands */
286
287 status = acpi_ds_create_operands(walk_state, next_op);
288 if (ACPI_FAILURE(status)) {
289 return_ACPI_STATUS(status);
290 }
291
292 obj_desc = acpi_ns_get_attached_object(node);
293 if (!obj_desc) {
294 return_ACPI_STATUS(AE_NOT_EXIST);
295 }
296
297 /* Resolve the operands */
298
299 status =
300 acpi_ex_resolve_operands(op->common.aml_opcode, ACPI_WALK_OPERANDS,
301 walk_state);
302 if (ACPI_FAILURE(status)) {
303 ACPI_ERROR((AE_INFO, "(%s) bad operand(s), status 0x%X",
304 acpi_ps_get_opcode_name(op->common.aml_opcode),
305 status));
306
307 return_ACPI_STATUS(status);
308 }
309
310 /* Initialize the Buffer Field */
311
312 if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
313
314 /* NOTE: Slightly different operands for this opcode */
315
316 status =
317 acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
318 walk_state->operands[0],
319 walk_state->operands[1],
320 walk_state->operands[2],
321 walk_state->operands[3]);
322 } else {
323 /* All other, create_xxx_field opcodes */
324
325 status =
326 acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
327 walk_state->operands[0],
328 walk_state->operands[1], NULL,
329 walk_state->operands[2]);
330 }
331
332 return_ACPI_STATUS(status);
333}
334
335/*******************************************************************************
336 *
337 * FUNCTION: acpi_ds_eval_region_operands
338 *
339 * PARAMETERS: walk_state - Current walk
340 * op - A valid region Op object
341 *
342 * RETURN: Status
343 *
344 * DESCRIPTION: Get region address and length
345 * Called from acpi_ds_exec_end_op during op_region parse tree walk
346 *
347 ******************************************************************************/
348
349acpi_status
350acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state,
351 union acpi_parse_object *op)
352{
353 acpi_status status;
354 union acpi_operand_object *obj_desc;
355 union acpi_operand_object *operand_desc;
356 struct acpi_namespace_node *node;
357 union acpi_parse_object *next_op;
358
359 ACPI_FUNCTION_TRACE_PTR(ds_eval_region_operands, op);
360
361 /*
362 * This is where we evaluate the address and length fields of the
363 * op_region declaration
364 */
365 node = op->common.node;
366
367 /* next_op points to the op that holds the space_ID */
368
369 next_op = op->common.value.arg;
370
371 /* next_op points to address op */
372
373 next_op = next_op->common.next;
374
375 /* Evaluate/create the address and length operands */
376
377 status = acpi_ds_create_operands(walk_state, next_op);
378 if (ACPI_FAILURE(status)) {
379 return_ACPI_STATUS(status);
380 }
381
382 /* Resolve the length and address operands to numbers */
383
384 status =
385 acpi_ex_resolve_operands(op->common.aml_opcode, ACPI_WALK_OPERANDS,
386 walk_state);
387 if (ACPI_FAILURE(status)) {
388 return_ACPI_STATUS(status);
389 }
390
391 obj_desc = acpi_ns_get_attached_object(node);
392 if (!obj_desc) {
393 return_ACPI_STATUS(AE_NOT_EXIST);
394 }
395
396 /*
397 * Get the length operand and save it
398 * (at Top of stack)
399 */
400 operand_desc = walk_state->operands[walk_state->num_operands - 1];
401
402 obj_desc->region.length = (u32) operand_desc->integer.value;
403 acpi_ut_remove_reference(operand_desc);
404
405 /*
406 * Get the address and save it
407 * (at top of stack - 1)
408 */
409 operand_desc = walk_state->operands[walk_state->num_operands - 2];
410
411 obj_desc->region.address = (acpi_physical_address)
412 operand_desc->integer.value;
413 acpi_ut_remove_reference(operand_desc);
414
415 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
416 obj_desc,
417 ACPI_FORMAT_UINT64(obj_desc->region.address),
418 obj_desc->region.length));
419
420 /* Now the address and length are valid for this opregion */
421
422 obj_desc->region.flags |= AOPOBJ_DATA_VALID;
423 return_ACPI_STATUS(status);
424}
425
426/*******************************************************************************
427 *
428 * FUNCTION: acpi_ds_eval_table_region_operands
429 *
430 * PARAMETERS: walk_state - Current walk
431 * op - A valid region Op object
432 *
433 * RETURN: Status
434 *
435 * DESCRIPTION: Get region address and length.
436 * Called from acpi_ds_exec_end_op during data_table_region parse
437 * tree walk.
438 *
439 ******************************************************************************/
440
441acpi_status
442acpi_ds_eval_table_region_operands(struct acpi_walk_state *walk_state,
443 union acpi_parse_object *op)
444{
445 acpi_status status;
446 union acpi_operand_object *obj_desc;
447 union acpi_operand_object **operand;
448 struct acpi_namespace_node *node;
449 union acpi_parse_object *next_op;
450 struct acpi_table_header *table;
451 u32 table_index;
452
453 ACPI_FUNCTION_TRACE_PTR(ds_eval_table_region_operands, op);
454
455 /*
456 * This is where we evaluate the Signature string, oem_id string,
457 * and oem_table_id string of the Data Table Region declaration
458 */
459 node = op->common.node;
460
461 /* next_op points to Signature string op */
462
463 next_op = op->common.value.arg;
464
465 /*
466 * Evaluate/create the Signature string, oem_id string,
467 * and oem_table_id string operands
468 */
469 status = acpi_ds_create_operands(walk_state, next_op);
470 if (ACPI_FAILURE(status)) {
471 return_ACPI_STATUS(status);
472 }
473
474 operand = &walk_state->operands[0];
475
476 /*
477 * Resolve the Signature string, oem_id string,
478 * and oem_table_id string operands
479 */
480 status =
481 acpi_ex_resolve_operands(op->common.aml_opcode, ACPI_WALK_OPERANDS,
482 walk_state);
483 if (ACPI_FAILURE(status)) {
484 goto cleanup;
485 }
486
487 /* Find the ACPI table */
488
489 status = acpi_tb_find_table(operand[0]->string.pointer,
490 operand[1]->string.pointer,
491 operand[2]->string.pointer, &table_index);
492 if (ACPI_FAILURE(status)) {
493 if (status == AE_NOT_FOUND) {
494 ACPI_ERROR((AE_INFO,
495 "ACPI Table [%4.4s] OEM:(%s, %s) not found in RSDT/XSDT",
496 operand[0]->string.pointer,
497 operand[1]->string.pointer,
498 operand[2]->string.pointer));
499 }
500 goto cleanup;
501 }
502
503 status = acpi_get_table_by_index(table_index, &table);
504 if (ACPI_FAILURE(status)) {
505 goto cleanup;
506 }
507
508 obj_desc = acpi_ns_get_attached_object(node);
509 if (!obj_desc) {
510 status = AE_NOT_EXIST;
511 goto cleanup;
512 }
513
514 obj_desc->region.address = ACPI_PTR_TO_PHYSADDR(table);
515 obj_desc->region.length = table->length;
516
517 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
518 obj_desc,
519 ACPI_FORMAT_UINT64(obj_desc->region.address),
520 obj_desc->region.length));
521
522 /* Now the address and length are valid for this opregion */
523
524 obj_desc->region.flags |= AOPOBJ_DATA_VALID;
525
526cleanup:
527 acpi_ut_remove_reference(operand[0]);
528 acpi_ut_remove_reference(operand[1]);
529 acpi_ut_remove_reference(operand[2]);
530
531 return_ACPI_STATUS(status);
532}
533
534/*******************************************************************************
535 *
536 * FUNCTION: acpi_ds_eval_data_object_operands
537 *
538 * PARAMETERS: walk_state - Current walk
539 * op - A valid data_object Op object
540 * obj_desc - data_object
541 *
542 * RETURN: Status
543 *
544 * DESCRIPTION: Get the operands and complete the following data object types:
545 * Buffer, Package.
546 *
547 ******************************************************************************/
548
549acpi_status
550acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state,
551 union acpi_parse_object *op,
552 union acpi_operand_object *obj_desc)
553{
554 acpi_status status;
555 union acpi_operand_object *arg_desc;
556 u32 length;
557
558 ACPI_FUNCTION_TRACE(ds_eval_data_object_operands);
559
560 /* The first operand (for all of these data objects) is the length */
561
562 /*
563 * Set proper index into operand stack for acpi_ds_obj_stack_push
564 * invoked inside acpi_ds_create_operand.
565 */
566 walk_state->operand_index = walk_state->num_operands;
567
568 /* Ignore if child is not valid */
569
570 if (!op->common.value.arg) {
571 ACPI_ERROR((AE_INFO,
572 "Missing child while evaluating opcode %4.4X, Op %p",
573 op->common.aml_opcode, op));
574 return_ACPI_STATUS(AE_OK);
575 }
576
577 status = acpi_ds_create_operand(walk_state, op->common.value.arg, 1);
578 if (ACPI_FAILURE(status)) {
579 return_ACPI_STATUS(status);
580 }
581
582 status = acpi_ex_resolve_operands(walk_state->opcode,
583 &(walk_state->
584 operands[walk_state->num_operands -
585 1]), walk_state);
586 if (ACPI_FAILURE(status)) {
587 return_ACPI_STATUS(status);
588 }
589
590 /* Extract length operand */
591
592 arg_desc = walk_state->operands[walk_state->num_operands - 1];
593 length = (u32) arg_desc->integer.value;
594
595 /* Cleanup for length operand */
596
597 status = acpi_ds_obj_stack_pop(1, walk_state);
598 if (ACPI_FAILURE(status)) {
599 return_ACPI_STATUS(status);
600 }
601
602 acpi_ut_remove_reference(arg_desc);
603
604 /*
605 * Create the actual data object
606 */
607 switch (op->common.aml_opcode) {
608 case AML_BUFFER_OP:
609
610 status =
611 acpi_ds_build_internal_buffer_obj(walk_state, op, length,
612 &obj_desc);
613 break;
614
615 case AML_PACKAGE_OP:
616 case AML_VARIABLE_PACKAGE_OP:
617
618 status =
619 acpi_ds_build_internal_package_obj(walk_state, op, length,
620 &obj_desc);
621 break;
622
623 default:
624
625 return_ACPI_STATUS(AE_AML_BAD_OPCODE);
626 }
627
628 if (ACPI_SUCCESS(status)) {
629 /*
630 * Return the object in the walk_state, unless the parent is a package -
631 * in this case, the return object will be stored in the parse tree
632 * for the package.
633 */
634 if ((!op->common.parent) ||
635 ((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
636 (op->common.parent->common.aml_opcode !=
637 AML_VARIABLE_PACKAGE_OP)
638 && (op->common.parent->common.aml_opcode !=
639 AML_NAME_OP))) {
640 walk_state->result_obj = obj_desc;
641 }
642 }
643
644 return_ACPI_STATUS(status);
645}
646
647/*******************************************************************************
648 *
649 * FUNCTION: acpi_ds_eval_bank_field_operands
650 *
651 * PARAMETERS: walk_state - Current walk
652 * op - A valid bank_field Op object
653 *
654 * RETURN: Status
655 *
656 * DESCRIPTION: Get bank_field bank_value
657 * Called from acpi_ds_exec_end_op during bank_field parse tree walk
658 *
659 ******************************************************************************/
660
661acpi_status
662acpi_ds_eval_bank_field_operands(struct acpi_walk_state *walk_state,
663 union acpi_parse_object *op)
664{
665 acpi_status status;
666 union acpi_operand_object *obj_desc;
667 union acpi_operand_object *operand_desc;
668 struct acpi_namespace_node *node;
669 union acpi_parse_object *next_op;
670 union acpi_parse_object *arg;
671
672 ACPI_FUNCTION_TRACE_PTR(ds_eval_bank_field_operands, op);
673
674 /*
675 * This is where we evaluate the bank_value field of the
676 * bank_field declaration
677 */
678
679 /* next_op points to the op that holds the Region */
680
681 next_op = op->common.value.arg;
682
683 /* next_op points to the op that holds the Bank Register */
684
685 next_op = next_op->common.next;
686
687 /* next_op points to the op that holds the Bank Value */
688
689 next_op = next_op->common.next;
690
691 /*
692 * Set proper index into operand stack for acpi_ds_obj_stack_push
693 * invoked inside acpi_ds_create_operand.
694 *
695 * We use walk_state->Operands[0] to store the evaluated bank_value
696 */
697 walk_state->operand_index = 0;
698
699 status = acpi_ds_create_operand(walk_state, next_op, 0);
700 if (ACPI_FAILURE(status)) {
701 return_ACPI_STATUS(status);
702 }
703
704 status = acpi_ex_resolve_to_value(&walk_state->operands[0], walk_state);
705 if (ACPI_FAILURE(status)) {
706 return_ACPI_STATUS(status);
707 }
708
709 ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS,
710 acpi_ps_get_opcode_name(op->common.aml_opcode), 1);
711 /*
712 * Get the bank_value operand and save it
713 * (at Top of stack)
714 */
715 operand_desc = walk_state->operands[0];
716
717 /* Arg points to the start Bank Field */
718
719 arg = acpi_ps_get_arg(op, 4);
720 while (arg) {
721
722 /* Ignore OFFSET and ACCESSAS terms here */
723
724 if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
725 node = arg->common.node;
726
727 obj_desc = acpi_ns_get_attached_object(node);
728 if (!obj_desc) {
729 return_ACPI_STATUS(AE_NOT_EXIST);
730 }
731
732 obj_desc->bank_field.value =
733 (u32) operand_desc->integer.value;
734 }
735
736 /* Move to next field in the list */
737
738 arg = arg->common.next;
739 }
740
741 acpi_ut_remove_reference(operand_desc);
742 return_ACPI_STATUS(status);
743}