Loading...
1/*
2 * drivers/mmc/host/sdhci-spear.c
3 *
4 * Support of SDHCI platform devices for spear soc family
5 *
6 * Copyright (C) 2010 ST Microelectronics
7 * Viresh Kumar <viresh.linux@gmail.com>
8 *
9 * Inspired by sdhci-pltfm.c
10 *
11 * This file is licensed under the terms of the GNU General Public
12 * License version 2. This program is licensed "as is" without any
13 * warranty of any kind, whether express or implied.
14 */
15
16#include <linux/clk.h>
17#include <linux/delay.h>
18#include <linux/gpio.h>
19#include <linux/highmem.h>
20#include <linux/module.h>
21#include <linux/interrupt.h>
22#include <linux/irq.h>
23#include <linux/platform_device.h>
24#include <linux/pm.h>
25#include <linux/slab.h>
26#include <linux/mmc/host.h>
27#include <linux/mmc/sdhci-spear.h>
28#include <linux/io.h>
29#include "sdhci.h"
30
31struct spear_sdhci {
32 struct clk *clk;
33 struct sdhci_plat_data *data;
34};
35
36/* sdhci ops */
37static struct sdhci_ops sdhci_pltfm_ops = {
38 /* Nothing to do for now. */
39};
40
41/* gpio card detection interrupt handler */
42static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id)
43{
44 struct platform_device *pdev = dev_id;
45 struct sdhci_host *host = platform_get_drvdata(pdev);
46 struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
47 unsigned long gpio_irq_type;
48 int val;
49
50 val = gpio_get_value(sdhci->data->card_int_gpio);
51
52 /* val == 1 -> card removed, val == 0 -> card inserted */
53 /* if card removed - set irq for low level, else vice versa */
54 gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
55 irq_set_irq_type(irq, gpio_irq_type);
56
57 if (sdhci->data->card_power_gpio >= 0) {
58 if (!sdhci->data->power_always_enb) {
59 /* if card inserted, give power, otherwise remove it */
60 val = sdhci->data->power_active_high ? !val : val ;
61 gpio_set_value(sdhci->data->card_power_gpio, val);
62 }
63 }
64
65 /* inform sdhci driver about card insertion/removal */
66 tasklet_schedule(&host->card_tasklet);
67
68 return IRQ_HANDLED;
69}
70
71static int __devinit sdhci_probe(struct platform_device *pdev)
72{
73 struct sdhci_host *host;
74 struct resource *iomem;
75 struct spear_sdhci *sdhci;
76 int ret;
77
78 iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
79 if (!iomem) {
80 ret = -ENOMEM;
81 dev_dbg(&pdev->dev, "memory resource not defined\n");
82 goto err;
83 }
84
85 if (!devm_request_mem_region(&pdev->dev, iomem->start,
86 resource_size(iomem), "spear-sdhci")) {
87 ret = -EBUSY;
88 dev_dbg(&pdev->dev, "cannot request region\n");
89 goto err;
90 }
91
92 sdhci = devm_kzalloc(&pdev->dev, sizeof(*sdhci), GFP_KERNEL);
93 if (!sdhci) {
94 ret = -ENOMEM;
95 dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
96 goto err;
97 }
98
99 /* clk enable */
100 sdhci->clk = clk_get(&pdev->dev, NULL);
101 if (IS_ERR(sdhci->clk)) {
102 ret = PTR_ERR(sdhci->clk);
103 dev_dbg(&pdev->dev, "Error getting clock\n");
104 goto err;
105 }
106
107 ret = clk_enable(sdhci->clk);
108 if (ret) {
109 dev_dbg(&pdev->dev, "Error enabling clock\n");
110 goto put_clk;
111 }
112
113 /* overwrite platform_data */
114 sdhci->data = dev_get_platdata(&pdev->dev);
115 pdev->dev.platform_data = sdhci;
116
117 if (pdev->dev.parent)
118 host = sdhci_alloc_host(pdev->dev.parent, 0);
119 else
120 host = sdhci_alloc_host(&pdev->dev, 0);
121
122 if (IS_ERR(host)) {
123 ret = PTR_ERR(host);
124 dev_dbg(&pdev->dev, "error allocating host\n");
125 goto disable_clk;
126 }
127
128 host->hw_name = "sdhci";
129 host->ops = &sdhci_pltfm_ops;
130 host->irq = platform_get_irq(pdev, 0);
131 host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
132
133 host->ioaddr = devm_ioremap(&pdev->dev, iomem->start,
134 resource_size(iomem));
135 if (!host->ioaddr) {
136 ret = -ENOMEM;
137 dev_dbg(&pdev->dev, "failed to remap registers\n");
138 goto free_host;
139 }
140
141 ret = sdhci_add_host(host);
142 if (ret) {
143 dev_dbg(&pdev->dev, "error adding host\n");
144 goto free_host;
145 }
146
147 platform_set_drvdata(pdev, host);
148
149 /*
150 * It is optional to use GPIOs for sdhci Power control & sdhci card
151 * interrupt detection. If sdhci->data is NULL, then use original sdhci
152 * lines otherwise GPIO lines.
153 * If GPIO is selected for power control, then power should be disabled
154 * after card removal and should be enabled when card insertion
155 * interrupt occurs
156 */
157 if (!sdhci->data)
158 return 0;
159
160 if (sdhci->data->card_power_gpio >= 0) {
161 int val = 0;
162
163 ret = devm_gpio_request(&pdev->dev,
164 sdhci->data->card_power_gpio, "sdhci");
165 if (ret < 0) {
166 dev_dbg(&pdev->dev, "gpio request fail: %d\n",
167 sdhci->data->card_power_gpio);
168 goto set_drvdata;
169 }
170
171 if (sdhci->data->power_always_enb)
172 val = sdhci->data->power_active_high;
173 else
174 val = !sdhci->data->power_active_high;
175
176 ret = gpio_direction_output(sdhci->data->card_power_gpio, val);
177 if (ret) {
178 dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
179 sdhci->data->card_power_gpio);
180 goto set_drvdata;
181 }
182 }
183
184 if (sdhci->data->card_int_gpio >= 0) {
185 ret = devm_gpio_request(&pdev->dev, sdhci->data->card_int_gpio,
186 "sdhci");
187 if (ret < 0) {
188 dev_dbg(&pdev->dev, "gpio request fail: %d\n",
189 sdhci->data->card_int_gpio);
190 goto set_drvdata;
191 }
192
193 ret = gpio_direction_input(sdhci->data->card_int_gpio);
194 if (ret) {
195 dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
196 sdhci->data->card_int_gpio);
197 goto set_drvdata;
198 }
199 ret = devm_request_irq(&pdev->dev,
200 gpio_to_irq(sdhci->data->card_int_gpio),
201 sdhci_gpio_irq, IRQF_TRIGGER_LOW,
202 mmc_hostname(host->mmc), pdev);
203 if (ret) {
204 dev_dbg(&pdev->dev, "gpio request irq fail: %d\n",
205 sdhci->data->card_int_gpio);
206 goto set_drvdata;
207 }
208
209 }
210
211 return 0;
212
213set_drvdata:
214 platform_set_drvdata(pdev, NULL);
215 sdhci_remove_host(host, 1);
216free_host:
217 sdhci_free_host(host);
218disable_clk:
219 clk_disable(sdhci->clk);
220put_clk:
221 clk_put(sdhci->clk);
222err:
223 dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret);
224 return ret;
225}
226
227static int __devexit sdhci_remove(struct platform_device *pdev)
228{
229 struct sdhci_host *host = platform_get_drvdata(pdev);
230 struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
231 int dead = 0;
232 u32 scratch;
233
234 platform_set_drvdata(pdev, NULL);
235 scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
236 if (scratch == (u32)-1)
237 dead = 1;
238
239 sdhci_remove_host(host, dead);
240 sdhci_free_host(host);
241 clk_disable(sdhci->clk);
242 clk_put(sdhci->clk);
243
244 return 0;
245}
246
247#ifdef CONFIG_PM
248static int sdhci_suspend(struct device *dev)
249{
250 struct sdhci_host *host = dev_get_drvdata(dev);
251 struct spear_sdhci *sdhci = dev_get_platdata(dev);
252 int ret;
253
254 ret = sdhci_suspend_host(host);
255 if (!ret)
256 clk_disable(sdhci->clk);
257
258 return ret;
259}
260
261static int sdhci_resume(struct device *dev)
262{
263 struct sdhci_host *host = dev_get_drvdata(dev);
264 struct spear_sdhci *sdhci = dev_get_platdata(dev);
265 int ret;
266
267 ret = clk_enable(sdhci->clk);
268 if (ret) {
269 dev_dbg(dev, "Resume: Error enabling clock\n");
270 return ret;
271 }
272
273 return sdhci_resume_host(host);
274}
275#endif
276
277static SIMPLE_DEV_PM_OPS(sdhci_pm_ops, sdhci_suspend, sdhci_resume);
278
279static struct platform_driver sdhci_driver = {
280 .driver = {
281 .name = "sdhci",
282 .owner = THIS_MODULE,
283 .pm = &sdhci_pm_ops,
284 },
285 .probe = sdhci_probe,
286 .remove = __devexit_p(sdhci_remove),
287};
288
289module_platform_driver(sdhci_driver);
290
291MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
292MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
293MODULE_LICENSE("GPL v2");
1/*
2 * drivers/mmc/host/sdhci-spear.c
3 *
4 * Support of SDHCI platform devices for spear soc family
5 *
6 * Copyright (C) 2010 ST Microelectronics
7 * Viresh Kumar <vireshk@kernel.org>
8 *
9 * Inspired by sdhci-pltfm.c
10 *
11 * This file is licensed under the terms of the GNU General Public
12 * License version 2. This program is licensed "as is" without any
13 * warranty of any kind, whether express or implied.
14 */
15
16#include <linux/clk.h>
17#include <linux/delay.h>
18#include <linux/gpio.h>
19#include <linux/highmem.h>
20#include <linux/module.h>
21#include <linux/interrupt.h>
22#include <linux/irq.h>
23#include <linux/of.h>
24#include <linux/of_gpio.h>
25#include <linux/platform_device.h>
26#include <linux/pm.h>
27#include <linux/slab.h>
28#include <linux/mmc/host.h>
29#include <linux/mmc/slot-gpio.h>
30#include <linux/io.h>
31#include "sdhci.h"
32
33struct spear_sdhci {
34 struct clk *clk;
35 int card_int_gpio;
36};
37
38/* sdhci ops */
39static const struct sdhci_ops sdhci_pltfm_ops = {
40 .set_clock = sdhci_set_clock,
41 .set_bus_width = sdhci_set_bus_width,
42 .reset = sdhci_reset,
43 .set_uhs_signaling = sdhci_set_uhs_signaling,
44};
45
46static void sdhci_probe_config_dt(struct device_node *np,
47 struct spear_sdhci *host)
48{
49 int cd_gpio;
50
51 cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
52 if (!gpio_is_valid(cd_gpio))
53 cd_gpio = -1;
54
55 host->card_int_gpio = cd_gpio;
56}
57
58static int sdhci_probe(struct platform_device *pdev)
59{
60 struct sdhci_host *host;
61 struct resource *iomem;
62 struct spear_sdhci *sdhci;
63 struct device *dev;
64 int ret;
65
66 dev = pdev->dev.parent ? pdev->dev.parent : &pdev->dev;
67 host = sdhci_alloc_host(dev, sizeof(*sdhci));
68 if (IS_ERR(host)) {
69 ret = PTR_ERR(host);
70 dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
71 goto err;
72 }
73
74 iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
75 host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem);
76 if (IS_ERR(host->ioaddr)) {
77 ret = PTR_ERR(host->ioaddr);
78 dev_dbg(&pdev->dev, "unable to map iomem: %d\n", ret);
79 goto err_host;
80 }
81
82 host->hw_name = "sdhci";
83 host->ops = &sdhci_pltfm_ops;
84 host->irq = platform_get_irq(pdev, 0);
85 host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
86
87 sdhci = sdhci_priv(host);
88
89 /* clk enable */
90 sdhci->clk = devm_clk_get(&pdev->dev, NULL);
91 if (IS_ERR(sdhci->clk)) {
92 ret = PTR_ERR(sdhci->clk);
93 dev_dbg(&pdev->dev, "Error getting clock\n");
94 goto err_host;
95 }
96
97 ret = clk_prepare_enable(sdhci->clk);
98 if (ret) {
99 dev_dbg(&pdev->dev, "Error enabling clock\n");
100 goto err_host;
101 }
102
103 ret = clk_set_rate(sdhci->clk, 50000000);
104 if (ret)
105 dev_dbg(&pdev->dev, "Error setting desired clk, clk=%lu\n",
106 clk_get_rate(sdhci->clk));
107
108 sdhci_probe_config_dt(pdev->dev.of_node, sdhci);
109 /*
110 * It is optional to use GPIOs for sdhci card detection. If
111 * sdhci->card_int_gpio < 0, then use original sdhci lines otherwise
112 * GPIO lines. We use the built-in GPIO support for this.
113 */
114 if (sdhci->card_int_gpio >= 0) {
115 ret = mmc_gpio_request_cd(host->mmc, sdhci->card_int_gpio, 0);
116 if (ret < 0) {
117 dev_dbg(&pdev->dev,
118 "failed to request card-detect gpio%d\n",
119 sdhci->card_int_gpio);
120 goto disable_clk;
121 }
122 }
123
124 ret = sdhci_add_host(host);
125 if (ret) {
126 dev_dbg(&pdev->dev, "error adding host\n");
127 goto disable_clk;
128 }
129
130 platform_set_drvdata(pdev, host);
131
132 return 0;
133
134disable_clk:
135 clk_disable_unprepare(sdhci->clk);
136err_host:
137 sdhci_free_host(host);
138err:
139 dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret);
140 return ret;
141}
142
143static int sdhci_remove(struct platform_device *pdev)
144{
145 struct sdhci_host *host = platform_get_drvdata(pdev);
146 struct spear_sdhci *sdhci = sdhci_priv(host);
147 int dead = 0;
148 u32 scratch;
149
150 scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
151 if (scratch == (u32)-1)
152 dead = 1;
153
154 sdhci_remove_host(host, dead);
155 clk_disable_unprepare(sdhci->clk);
156 sdhci_free_host(host);
157
158 return 0;
159}
160
161#ifdef CONFIG_PM_SLEEP
162static int sdhci_suspend(struct device *dev)
163{
164 struct sdhci_host *host = dev_get_drvdata(dev);
165 struct spear_sdhci *sdhci = sdhci_priv(host);
166 int ret;
167
168 ret = sdhci_suspend_host(host);
169 if (!ret)
170 clk_disable(sdhci->clk);
171
172 return ret;
173}
174
175static int sdhci_resume(struct device *dev)
176{
177 struct sdhci_host *host = dev_get_drvdata(dev);
178 struct spear_sdhci *sdhci = sdhci_priv(host);
179 int ret;
180
181 ret = clk_enable(sdhci->clk);
182 if (ret) {
183 dev_dbg(dev, "Resume: Error enabling clock\n");
184 return ret;
185 }
186
187 return sdhci_resume_host(host);
188}
189#endif
190
191static SIMPLE_DEV_PM_OPS(sdhci_pm_ops, sdhci_suspend, sdhci_resume);
192
193#ifdef CONFIG_OF
194static const struct of_device_id sdhci_spear_id_table[] = {
195 { .compatible = "st,spear300-sdhci" },
196 {}
197};
198MODULE_DEVICE_TABLE(of, sdhci_spear_id_table);
199#endif
200
201static struct platform_driver sdhci_driver = {
202 .driver = {
203 .name = "sdhci",
204 .pm = &sdhci_pm_ops,
205 .of_match_table = of_match_ptr(sdhci_spear_id_table),
206 },
207 .probe = sdhci_probe,
208 .remove = sdhci_remove,
209};
210
211module_platform_driver(sdhci_driver);
212
213MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
214MODULE_AUTHOR("Viresh Kumar <vireshk@kernel.org>");
215MODULE_LICENSE("GPL v2");