Loading...
1/*******************************************************************************
2 *
3 * Module Name: nsobject - Utilities for objects attached to namespace
4 * table entries
5 *
6 ******************************************************************************/
7
8/*
9 * Copyright (C) 2000 - 2012, Intel Corp.
10 * All rights reserved.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
30 *
31 * NO WARRANTY
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
43 */
44
45#include <acpi/acpi.h>
46#include "accommon.h"
47#include "acnamesp.h"
48
49#define _COMPONENT ACPI_NAMESPACE
50ACPI_MODULE_NAME("nsobject")
51
52/*******************************************************************************
53 *
54 * FUNCTION: acpi_ns_attach_object
55 *
56 * PARAMETERS: Node - Parent Node
57 * Object - Object to be attached
58 * Type - Type of object, or ACPI_TYPE_ANY if not
59 * known
60 *
61 * RETURN: Status
62 *
63 * DESCRIPTION: Record the given object as the value associated with the
64 * name whose acpi_handle is passed. If Object is NULL
65 * and Type is ACPI_TYPE_ANY, set the name as having no value.
66 * Note: Future may require that the Node->Flags field be passed
67 * as a parameter.
68 *
69 * MUTEX: Assumes namespace is locked
70 *
71 ******************************************************************************/
72acpi_status
73acpi_ns_attach_object(struct acpi_namespace_node *node,
74 union acpi_operand_object *object, acpi_object_type type)
75{
76 union acpi_operand_object *obj_desc;
77 union acpi_operand_object *last_obj_desc;
78 acpi_object_type object_type = ACPI_TYPE_ANY;
79
80 ACPI_FUNCTION_TRACE(ns_attach_object);
81
82 /*
83 * Parameter validation
84 */
85 if (!node) {
86
87 /* Invalid handle */
88
89 ACPI_ERROR((AE_INFO, "Null NamedObj handle"));
90 return_ACPI_STATUS(AE_BAD_PARAMETER);
91 }
92
93 if (!object && (ACPI_TYPE_ANY != type)) {
94
95 /* Null object */
96
97 ACPI_ERROR((AE_INFO,
98 "Null object, but type not ACPI_TYPE_ANY"));
99 return_ACPI_STATUS(AE_BAD_PARAMETER);
100 }
101
102 if (ACPI_GET_DESCRIPTOR_TYPE(node) != ACPI_DESC_TYPE_NAMED) {
103
104 /* Not a name handle */
105
106 ACPI_ERROR((AE_INFO, "Invalid handle %p [%s]",
107 node, acpi_ut_get_descriptor_name(node)));
108 return_ACPI_STATUS(AE_BAD_PARAMETER);
109 }
110
111 /* Check if this object is already attached */
112
113 if (node->object == object) {
114 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
115 "Obj %p already installed in NameObj %p\n",
116 object, node));
117
118 return_ACPI_STATUS(AE_OK);
119 }
120
121 /* If null object, we will just install it */
122
123 if (!object) {
124 obj_desc = NULL;
125 object_type = ACPI_TYPE_ANY;
126 }
127
128 /*
129 * If the source object is a namespace Node with an attached object,
130 * we will use that (attached) object
131 */
132 else if ((ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED) &&
133 ((struct acpi_namespace_node *)object)->object) {
134 /*
135 * Value passed is a name handle and that name has a
136 * non-null value. Use that name's value and type.
137 */
138 obj_desc = ((struct acpi_namespace_node *)object)->object;
139 object_type = ((struct acpi_namespace_node *)object)->type;
140 }
141
142 /*
143 * Otherwise, we will use the parameter object, but we must type
144 * it first
145 */
146 else {
147 obj_desc = (union acpi_operand_object *)object;
148
149 /* Use the given type */
150
151 object_type = type;
152 }
153
154 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Installing %p into Node %p [%4.4s]\n",
155 obj_desc, node, acpi_ut_get_node_name(node)));
156
157 /* Detach an existing attached object if present */
158
159 if (node->object) {
160 acpi_ns_detach_object(node);
161 }
162
163 if (obj_desc) {
164 /*
165 * Must increment the new value's reference count
166 * (if it is an internal object)
167 */
168 acpi_ut_add_reference(obj_desc);
169
170 /*
171 * Handle objects with multiple descriptors - walk
172 * to the end of the descriptor list
173 */
174 last_obj_desc = obj_desc;
175 while (last_obj_desc->common.next_object) {
176 last_obj_desc = last_obj_desc->common.next_object;
177 }
178
179 /* Install the object at the front of the object list */
180
181 last_obj_desc->common.next_object = node->object;
182 }
183
184 node->type = (u8) object_type;
185 node->object = obj_desc;
186
187 return_ACPI_STATUS(AE_OK);
188}
189
190/*******************************************************************************
191 *
192 * FUNCTION: acpi_ns_detach_object
193 *
194 * PARAMETERS: Node - A Namespace node whose object will be detached
195 *
196 * RETURN: None.
197 *
198 * DESCRIPTION: Detach/delete an object associated with a namespace node.
199 * if the object is an allocated object, it is freed.
200 * Otherwise, the field is simply cleared.
201 *
202 ******************************************************************************/
203
204void acpi_ns_detach_object(struct acpi_namespace_node *node)
205{
206 union acpi_operand_object *obj_desc;
207
208 ACPI_FUNCTION_TRACE(ns_detach_object);
209
210 obj_desc = node->object;
211
212 if (!obj_desc || (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) {
213 return_VOID;
214 }
215
216 if (node->flags & ANOBJ_ALLOCATED_BUFFER) {
217
218 /* Free the dynamic aml buffer */
219
220 if (obj_desc->common.type == ACPI_TYPE_METHOD) {
221 ACPI_FREE(obj_desc->method.aml_start);
222 }
223 }
224
225 /* Clear the entry in all cases */
226
227 node->object = NULL;
228 if (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) == ACPI_DESC_TYPE_OPERAND) {
229 node->object = obj_desc->common.next_object;
230 if (node->object &&
231 ((node->object)->common.type != ACPI_TYPE_LOCAL_DATA)) {
232 node->object = node->object->common.next_object;
233 }
234 }
235
236 /* Reset the node type to untyped */
237
238 node->type = ACPI_TYPE_ANY;
239
240 ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "Node %p [%4.4s] Object %p\n",
241 node, acpi_ut_get_node_name(node), obj_desc));
242
243 /* Remove one reference on the object (and all subobjects) */
244
245 acpi_ut_remove_reference(obj_desc);
246 return_VOID;
247}
248
249/*******************************************************************************
250 *
251 * FUNCTION: acpi_ns_get_attached_object
252 *
253 * PARAMETERS: Node - Namespace node
254 *
255 * RETURN: Current value of the object field from the Node whose
256 * handle is passed
257 *
258 * DESCRIPTION: Obtain the object attached to a namespace node.
259 *
260 ******************************************************************************/
261
262union acpi_operand_object *acpi_ns_get_attached_object(struct
263 acpi_namespace_node
264 *node)
265{
266 ACPI_FUNCTION_TRACE_PTR(ns_get_attached_object, node);
267
268 if (!node) {
269 ACPI_WARNING((AE_INFO, "Null Node ptr"));
270 return_PTR(NULL);
271 }
272
273 if (!node->object ||
274 ((ACPI_GET_DESCRIPTOR_TYPE(node->object) != ACPI_DESC_TYPE_OPERAND)
275 && (ACPI_GET_DESCRIPTOR_TYPE(node->object) !=
276 ACPI_DESC_TYPE_NAMED))
277 || ((node->object)->common.type == ACPI_TYPE_LOCAL_DATA)) {
278 return_PTR(NULL);
279 }
280
281 return_PTR(node->object);
282}
283
284/*******************************************************************************
285 *
286 * FUNCTION: acpi_ns_get_secondary_object
287 *
288 * PARAMETERS: Node - Namespace node
289 *
290 * RETURN: Current value of the object field from the Node whose
291 * handle is passed.
292 *
293 * DESCRIPTION: Obtain a secondary object associated with a namespace node.
294 *
295 ******************************************************************************/
296
297union acpi_operand_object *acpi_ns_get_secondary_object(union
298 acpi_operand_object
299 *obj_desc)
300{
301 ACPI_FUNCTION_TRACE_PTR(ns_get_secondary_object, obj_desc);
302
303 if ((!obj_desc) ||
304 (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA) ||
305 (!obj_desc->common.next_object) ||
306 ((obj_desc->common.next_object)->common.type ==
307 ACPI_TYPE_LOCAL_DATA)) {
308 return_PTR(NULL);
309 }
310
311 return_PTR(obj_desc->common.next_object);
312}
313
314/*******************************************************************************
315 *
316 * FUNCTION: acpi_ns_attach_data
317 *
318 * PARAMETERS: Node - Namespace node
319 * Handler - Handler to be associated with the data
320 * Data - Data to be attached
321 *
322 * RETURN: Status
323 *
324 * DESCRIPTION: Low-level attach data. Create and attach a Data object.
325 *
326 ******************************************************************************/
327
328acpi_status
329acpi_ns_attach_data(struct acpi_namespace_node *node,
330 acpi_object_handler handler, void *data)
331{
332 union acpi_operand_object *prev_obj_desc;
333 union acpi_operand_object *obj_desc;
334 union acpi_operand_object *data_desc;
335
336 /* We only allow one attachment per handler */
337
338 prev_obj_desc = NULL;
339 obj_desc = node->object;
340 while (obj_desc) {
341 if ((obj_desc->common.type == ACPI_TYPE_LOCAL_DATA) &&
342 (obj_desc->data.handler == handler)) {
343 return (AE_ALREADY_EXISTS);
344 }
345
346 prev_obj_desc = obj_desc;
347 obj_desc = obj_desc->common.next_object;
348 }
349
350 /* Create an internal object for the data */
351
352 data_desc = acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_DATA);
353 if (!data_desc) {
354 return (AE_NO_MEMORY);
355 }
356
357 data_desc->data.handler = handler;
358 data_desc->data.pointer = data;
359
360 /* Install the data object */
361
362 if (prev_obj_desc) {
363 prev_obj_desc->common.next_object = data_desc;
364 } else {
365 node->object = data_desc;
366 }
367
368 return (AE_OK);
369}
370
371/*******************************************************************************
372 *
373 * FUNCTION: acpi_ns_detach_data
374 *
375 * PARAMETERS: Node - Namespace node
376 * Handler - Handler associated with the data
377 *
378 * RETURN: Status
379 *
380 * DESCRIPTION: Low-level detach data. Delete the data node, but the caller
381 * is responsible for the actual data.
382 *
383 ******************************************************************************/
384
385acpi_status
386acpi_ns_detach_data(struct acpi_namespace_node * node,
387 acpi_object_handler handler)
388{
389 union acpi_operand_object *obj_desc;
390 union acpi_operand_object *prev_obj_desc;
391
392 prev_obj_desc = NULL;
393 obj_desc = node->object;
394 while (obj_desc) {
395 if ((obj_desc->common.type == ACPI_TYPE_LOCAL_DATA) &&
396 (obj_desc->data.handler == handler)) {
397 if (prev_obj_desc) {
398 prev_obj_desc->common.next_object =
399 obj_desc->common.next_object;
400 } else {
401 node->object = obj_desc->common.next_object;
402 }
403
404 acpi_ut_remove_reference(obj_desc);
405 return (AE_OK);
406 }
407
408 prev_obj_desc = obj_desc;
409 obj_desc = obj_desc->common.next_object;
410 }
411
412 return (AE_NOT_FOUND);
413}
414
415/*******************************************************************************
416 *
417 * FUNCTION: acpi_ns_get_attached_data
418 *
419 * PARAMETERS: Node - Namespace node
420 * Handler - Handler associated with the data
421 * Data - Where the data is returned
422 *
423 * RETURN: Status
424 *
425 * DESCRIPTION: Low level interface to obtain data previously associated with
426 * a namespace node.
427 *
428 ******************************************************************************/
429
430acpi_status
431acpi_ns_get_attached_data(struct acpi_namespace_node * node,
432 acpi_object_handler handler, void **data)
433{
434 union acpi_operand_object *obj_desc;
435
436 obj_desc = node->object;
437 while (obj_desc) {
438 if ((obj_desc->common.type == ACPI_TYPE_LOCAL_DATA) &&
439 (obj_desc->data.handler == handler)) {
440 *data = obj_desc->data.pointer;
441 return (AE_OK);
442 }
443
444 obj_desc = obj_desc->common.next_object;
445 }
446
447 return (AE_NOT_FOUND);
448}
1/*******************************************************************************
2 *
3 * Module Name: nsobject - Utilities for objects attached to namespace
4 * table entries
5 *
6 ******************************************************************************/
7
8/*
9 * Copyright (C) 2000 - 2014, Intel Corp.
10 * All rights reserved.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
30 *
31 * NO WARRANTY
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
43 */
44
45#include <acpi/acpi.h>
46#include "accommon.h"
47#include "acnamesp.h"
48
49#define _COMPONENT ACPI_NAMESPACE
50ACPI_MODULE_NAME("nsobject")
51
52/*******************************************************************************
53 *
54 * FUNCTION: acpi_ns_attach_object
55 *
56 * PARAMETERS: node - Parent Node
57 * object - Object to be attached
58 * type - Type of object, or ACPI_TYPE_ANY if not
59 * known
60 *
61 * RETURN: Status
62 *
63 * DESCRIPTION: Record the given object as the value associated with the
64 * name whose acpi_handle is passed. If Object is NULL
65 * and Type is ACPI_TYPE_ANY, set the name as having no value.
66 * Note: Future may require that the Node->Flags field be passed
67 * as a parameter.
68 *
69 * MUTEX: Assumes namespace is locked
70 *
71 ******************************************************************************/
72acpi_status
73acpi_ns_attach_object(struct acpi_namespace_node *node,
74 union acpi_operand_object *object, acpi_object_type type)
75{
76 union acpi_operand_object *obj_desc;
77 union acpi_operand_object *last_obj_desc;
78 acpi_object_type object_type = ACPI_TYPE_ANY;
79
80 ACPI_FUNCTION_TRACE(ns_attach_object);
81
82 /*
83 * Parameter validation
84 */
85 if (!node) {
86
87 /* Invalid handle */
88
89 ACPI_ERROR((AE_INFO, "Null NamedObj handle"));
90 return_ACPI_STATUS(AE_BAD_PARAMETER);
91 }
92
93 if (!object && (ACPI_TYPE_ANY != type)) {
94
95 /* Null object */
96
97 ACPI_ERROR((AE_INFO,
98 "Null object, but type not ACPI_TYPE_ANY"));
99 return_ACPI_STATUS(AE_BAD_PARAMETER);
100 }
101
102 if (ACPI_GET_DESCRIPTOR_TYPE(node) != ACPI_DESC_TYPE_NAMED) {
103
104 /* Not a name handle */
105
106 ACPI_ERROR((AE_INFO, "Invalid handle %p [%s]",
107 node, acpi_ut_get_descriptor_name(node)));
108 return_ACPI_STATUS(AE_BAD_PARAMETER);
109 }
110
111 /* Check if this object is already attached */
112
113 if (node->object == object) {
114 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
115 "Obj %p already installed in NameObj %p\n",
116 object, node));
117
118 return_ACPI_STATUS(AE_OK);
119 }
120
121 /* If null object, we will just install it */
122
123 if (!object) {
124 obj_desc = NULL;
125 object_type = ACPI_TYPE_ANY;
126 }
127
128 /*
129 * If the source object is a namespace Node with an attached object,
130 * we will use that (attached) object
131 */
132 else if ((ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED) &&
133 ((struct acpi_namespace_node *)object)->object) {
134 /*
135 * Value passed is a name handle and that name has a
136 * non-null value. Use that name's value and type.
137 */
138 obj_desc = ((struct acpi_namespace_node *)object)->object;
139 object_type = ((struct acpi_namespace_node *)object)->type;
140 }
141
142 /*
143 * Otherwise, we will use the parameter object, but we must type
144 * it first
145 */
146 else {
147 obj_desc = (union acpi_operand_object *)object;
148
149 /* Use the given type */
150
151 object_type = type;
152 }
153
154 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Installing %p into Node %p [%4.4s]\n",
155 obj_desc, node, acpi_ut_get_node_name(node)));
156
157 /* Detach an existing attached object if present */
158
159 if (node->object) {
160 acpi_ns_detach_object(node);
161 }
162
163 if (obj_desc) {
164 /*
165 * Must increment the new value's reference count
166 * (if it is an internal object)
167 */
168 acpi_ut_add_reference(obj_desc);
169
170 /*
171 * Handle objects with multiple descriptors - walk
172 * to the end of the descriptor list
173 */
174 last_obj_desc = obj_desc;
175 while (last_obj_desc->common.next_object) {
176 last_obj_desc = last_obj_desc->common.next_object;
177 }
178
179 /* Install the object at the front of the object list */
180
181 last_obj_desc->common.next_object = node->object;
182 }
183
184 node->type = (u8) object_type;
185 node->object = obj_desc;
186
187 return_ACPI_STATUS(AE_OK);
188}
189
190/*******************************************************************************
191 *
192 * FUNCTION: acpi_ns_detach_object
193 *
194 * PARAMETERS: node - A Namespace node whose object will be detached
195 *
196 * RETURN: None.
197 *
198 * DESCRIPTION: Detach/delete an object associated with a namespace node.
199 * if the object is an allocated object, it is freed.
200 * Otherwise, the field is simply cleared.
201 *
202 ******************************************************************************/
203
204void acpi_ns_detach_object(struct acpi_namespace_node *node)
205{
206 union acpi_operand_object *obj_desc;
207
208 ACPI_FUNCTION_TRACE(ns_detach_object);
209
210 obj_desc = node->object;
211
212 if (!obj_desc || (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) {
213 return_VOID;
214 }
215
216 if (node->flags & ANOBJ_ALLOCATED_BUFFER) {
217
218 /* Free the dynamic aml buffer */
219
220 if (obj_desc->common.type == ACPI_TYPE_METHOD) {
221 ACPI_FREE(obj_desc->method.aml_start);
222 }
223 }
224
225 /* Clear the Node entry in all cases */
226
227 node->object = NULL;
228 if (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) == ACPI_DESC_TYPE_OPERAND) {
229
230 /* Unlink object from front of possible object list */
231
232 node->object = obj_desc->common.next_object;
233
234 /* Handle possible 2-descriptor object */
235
236 if (node->object &&
237 (node->object->common.type != ACPI_TYPE_LOCAL_DATA)) {
238 node->object = node->object->common.next_object;
239 }
240 }
241
242 /* Reset the node type to untyped */
243
244 node->type = ACPI_TYPE_ANY;
245
246 ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "Node %p [%4.4s] Object %p\n",
247 node, acpi_ut_get_node_name(node), obj_desc));
248
249 /* Remove one reference on the object (and all subobjects) */
250
251 acpi_ut_remove_reference(obj_desc);
252 return_VOID;
253}
254
255/*******************************************************************************
256 *
257 * FUNCTION: acpi_ns_get_attached_object
258 *
259 * PARAMETERS: node - Namespace node
260 *
261 * RETURN: Current value of the object field from the Node whose
262 * handle is passed
263 *
264 * DESCRIPTION: Obtain the object attached to a namespace node.
265 *
266 ******************************************************************************/
267
268union acpi_operand_object *acpi_ns_get_attached_object(struct
269 acpi_namespace_node
270 *node)
271{
272 ACPI_FUNCTION_TRACE_PTR(ns_get_attached_object, node);
273
274 if (!node) {
275 ACPI_WARNING((AE_INFO, "Null Node ptr"));
276 return_PTR(NULL);
277 }
278
279 if (!node->object ||
280 ((ACPI_GET_DESCRIPTOR_TYPE(node->object) != ACPI_DESC_TYPE_OPERAND)
281 && (ACPI_GET_DESCRIPTOR_TYPE(node->object) !=
282 ACPI_DESC_TYPE_NAMED))
283 || ((node->object)->common.type == ACPI_TYPE_LOCAL_DATA)) {
284 return_PTR(NULL);
285 }
286
287 return_PTR(node->object);
288}
289
290/*******************************************************************************
291 *
292 * FUNCTION: acpi_ns_get_secondary_object
293 *
294 * PARAMETERS: node - Namespace node
295 *
296 * RETURN: Current value of the object field from the Node whose
297 * handle is passed.
298 *
299 * DESCRIPTION: Obtain a secondary object associated with a namespace node.
300 *
301 ******************************************************************************/
302
303union acpi_operand_object *acpi_ns_get_secondary_object(union
304 acpi_operand_object
305 *obj_desc)
306{
307 ACPI_FUNCTION_TRACE_PTR(ns_get_secondary_object, obj_desc);
308
309 if ((!obj_desc) ||
310 (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA) ||
311 (!obj_desc->common.next_object) ||
312 ((obj_desc->common.next_object)->common.type ==
313 ACPI_TYPE_LOCAL_DATA)) {
314 return_PTR(NULL);
315 }
316
317 return_PTR(obj_desc->common.next_object);
318}
319
320/*******************************************************************************
321 *
322 * FUNCTION: acpi_ns_attach_data
323 *
324 * PARAMETERS: node - Namespace node
325 * handler - Handler to be associated with the data
326 * data - Data to be attached
327 *
328 * RETURN: Status
329 *
330 * DESCRIPTION: Low-level attach data. Create and attach a Data object.
331 *
332 ******************************************************************************/
333
334acpi_status
335acpi_ns_attach_data(struct acpi_namespace_node *node,
336 acpi_object_handler handler, void *data)
337{
338 union acpi_operand_object *prev_obj_desc;
339 union acpi_operand_object *obj_desc;
340 union acpi_operand_object *data_desc;
341
342 /* We only allow one attachment per handler */
343
344 prev_obj_desc = NULL;
345 obj_desc = node->object;
346 while (obj_desc) {
347 if ((obj_desc->common.type == ACPI_TYPE_LOCAL_DATA) &&
348 (obj_desc->data.handler == handler)) {
349 return (AE_ALREADY_EXISTS);
350 }
351
352 prev_obj_desc = obj_desc;
353 obj_desc = obj_desc->common.next_object;
354 }
355
356 /* Create an internal object for the data */
357
358 data_desc = acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_DATA);
359 if (!data_desc) {
360 return (AE_NO_MEMORY);
361 }
362
363 data_desc->data.handler = handler;
364 data_desc->data.pointer = data;
365
366 /* Install the data object */
367
368 if (prev_obj_desc) {
369 prev_obj_desc->common.next_object = data_desc;
370 } else {
371 node->object = data_desc;
372 }
373
374 return (AE_OK);
375}
376
377/*******************************************************************************
378 *
379 * FUNCTION: acpi_ns_detach_data
380 *
381 * PARAMETERS: node - Namespace node
382 * handler - Handler associated with the data
383 *
384 * RETURN: Status
385 *
386 * DESCRIPTION: Low-level detach data. Delete the data node, but the caller
387 * is responsible for the actual data.
388 *
389 ******************************************************************************/
390
391acpi_status
392acpi_ns_detach_data(struct acpi_namespace_node * node,
393 acpi_object_handler handler)
394{
395 union acpi_operand_object *obj_desc;
396 union acpi_operand_object *prev_obj_desc;
397
398 prev_obj_desc = NULL;
399 obj_desc = node->object;
400 while (obj_desc) {
401 if ((obj_desc->common.type == ACPI_TYPE_LOCAL_DATA) &&
402 (obj_desc->data.handler == handler)) {
403 if (prev_obj_desc) {
404 prev_obj_desc->common.next_object =
405 obj_desc->common.next_object;
406 } else {
407 node->object = obj_desc->common.next_object;
408 }
409
410 acpi_ut_remove_reference(obj_desc);
411 return (AE_OK);
412 }
413
414 prev_obj_desc = obj_desc;
415 obj_desc = obj_desc->common.next_object;
416 }
417
418 return (AE_NOT_FOUND);
419}
420
421/*******************************************************************************
422 *
423 * FUNCTION: acpi_ns_get_attached_data
424 *
425 * PARAMETERS: node - Namespace node
426 * handler - Handler associated with the data
427 * data - Where the data is returned
428 *
429 * RETURN: Status
430 *
431 * DESCRIPTION: Low level interface to obtain data previously associated with
432 * a namespace node.
433 *
434 ******************************************************************************/
435
436acpi_status
437acpi_ns_get_attached_data(struct acpi_namespace_node * node,
438 acpi_object_handler handler, void **data)
439{
440 union acpi_operand_object *obj_desc;
441
442 obj_desc = node->object;
443 while (obj_desc) {
444 if ((obj_desc->common.type == ACPI_TYPE_LOCAL_DATA) &&
445 (obj_desc->data.handler == handler)) {
446 *data = obj_desc->data.pointer;
447 return (AE_OK);
448 }
449
450 obj_desc = obj_desc->common.next_object;
451 }
452
453 return (AE_NOT_FOUND);
454}