Loading...
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 2007 MIPS Technologies, Inc.
7 * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
8 */
9#include <linux/clockchips.h>
10#include <linux/interrupt.h>
11#include <linux/percpu.h>
12#include <linux/smp.h>
13#include <linux/irq.h>
14
15#include <asm/smtc_ipi.h>
16#include <asm/time.h>
17#include <asm/cevt-r4k.h>
18
19/*
20 * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
21 * of these routines with SMTC-specific variants.
22 */
23
24#ifndef CONFIG_MIPS_MT_SMTC
25
26static int mips_next_event(unsigned long delta,
27 struct clock_event_device *evt)
28{
29 unsigned int cnt;
30 int res;
31
32 cnt = read_c0_count();
33 cnt += delta;
34 write_c0_compare(cnt);
35 res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
36 return res;
37}
38
39#endif /* CONFIG_MIPS_MT_SMTC */
40
41void mips_set_clock_mode(enum clock_event_mode mode,
42 struct clock_event_device *evt)
43{
44 /* Nothing to do ... */
45}
46
47DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
48int cp0_timer_irq_installed;
49
50#ifndef CONFIG_MIPS_MT_SMTC
51
52irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
53{
54 const int r2 = cpu_has_mips_r2;
55 struct clock_event_device *cd;
56 int cpu = smp_processor_id();
57
58 /*
59 * Suckage alert:
60 * Before R2 of the architecture there was no way to see if a
61 * performance counter interrupt was pending, so we have to run
62 * the performance counter interrupt handler anyway.
63 */
64 if (handle_perf_irq(r2))
65 goto out;
66
67 /*
68 * The same applies to performance counter interrupts. But with the
69 * above we now know that the reason we got here must be a timer
70 * interrupt. Being the paranoiacs we are we check anyway.
71 */
72 if (!r2 || (read_c0_cause() & (1 << 30))) {
73 /* Clear Count/Compare Interrupt */
74 write_c0_compare(read_c0_compare());
75 cd = &per_cpu(mips_clockevent_device, cpu);
76 cd->event_handler(cd);
77 }
78
79out:
80 return IRQ_HANDLED;
81}
82
83#endif /* Not CONFIG_MIPS_MT_SMTC */
84
85struct irqaction c0_compare_irqaction = {
86 .handler = c0_compare_interrupt,
87 .flags = IRQF_PERCPU | IRQF_TIMER,
88 .name = "timer",
89};
90
91
92void mips_event_handler(struct clock_event_device *dev)
93{
94}
95
96/*
97 * FIXME: This doesn't hold for the relocated E9000 compare interrupt.
98 */
99static int c0_compare_int_pending(void)
100{
101 return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP);
102}
103
104/*
105 * Compare interrupt can be routed and latched outside the core,
106 * so wait up to worst case number of cycle counter ticks for timer interrupt
107 * changes to propagate to the cause register.
108 */
109#define COMPARE_INT_SEEN_TICKS 50
110
111int c0_compare_int_usable(void)
112{
113 unsigned int delta;
114 unsigned int cnt;
115
116 /*
117 * IP7 already pending? Try to clear it by acking the timer.
118 */
119 if (c0_compare_int_pending()) {
120 cnt = read_c0_count();
121 write_c0_compare(cnt);
122 back_to_back_c0_hazard();
123 while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
124 if (!c0_compare_int_pending())
125 break;
126 if (c0_compare_int_pending())
127 return 0;
128 }
129
130 for (delta = 0x10; delta <= 0x400000; delta <<= 1) {
131 cnt = read_c0_count();
132 cnt += delta;
133 write_c0_compare(cnt);
134 back_to_back_c0_hazard();
135 if ((int)(read_c0_count() - cnt) < 0)
136 break;
137 /* increase delta if the timer was already expired */
138 }
139
140 while ((int)(read_c0_count() - cnt) <= 0)
141 ; /* Wait for expiry */
142
143 while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
144 if (c0_compare_int_pending())
145 break;
146 if (!c0_compare_int_pending())
147 return 0;
148 cnt = read_c0_count();
149 write_c0_compare(cnt);
150 back_to_back_c0_hazard();
151 while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
152 if (!c0_compare_int_pending())
153 break;
154 if (c0_compare_int_pending())
155 return 0;
156
157 /*
158 * Feels like a real count / compare timer.
159 */
160 return 1;
161}
162
163#ifndef CONFIG_MIPS_MT_SMTC
164
165int __cpuinit r4k_clockevent_init(void)
166{
167 unsigned int cpu = smp_processor_id();
168 struct clock_event_device *cd;
169 unsigned int irq;
170
171 if (!cpu_has_counter || !mips_hpt_frequency)
172 return -ENXIO;
173
174 if (!c0_compare_int_usable())
175 return -ENXIO;
176
177 /*
178 * With vectored interrupts things are getting platform specific.
179 * get_c0_compare_int is a hook to allow a platform to return the
180 * interrupt number of it's liking.
181 */
182 irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
183 if (get_c0_compare_int)
184 irq = get_c0_compare_int();
185
186 cd = &per_cpu(mips_clockevent_device, cpu);
187
188 cd->name = "MIPS";
189 cd->features = CLOCK_EVT_FEAT_ONESHOT;
190
191 clockevent_set_clock(cd, mips_hpt_frequency);
192
193 /* Calculate the min / max delta */
194 cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
195 cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
196
197 cd->rating = 300;
198 cd->irq = irq;
199 cd->cpumask = cpumask_of(cpu);
200 cd->set_next_event = mips_next_event;
201 cd->set_mode = mips_set_clock_mode;
202 cd->event_handler = mips_event_handler;
203
204 clockevents_register_device(cd);
205
206 if (cp0_timer_irq_installed)
207 return 0;
208
209 cp0_timer_irq_installed = 1;
210
211 setup_irq(irq, &c0_compare_irqaction);
212
213 return 0;
214}
215
216#endif /* Not CONFIG_MIPS_MT_SMTC */
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 2007 MIPS Technologies, Inc.
7 * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
8 */
9#include <linux/clockchips.h>
10#include <linux/interrupt.h>
11#include <linux/percpu.h>
12#include <linux/smp.h>
13#include <linux/irq.h>
14
15#include <asm/smtc_ipi.h>
16#include <asm/time.h>
17#include <asm/cevt-r4k.h>
18#include <asm/gic.h>
19
20/*
21 * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
22 * of these routines with SMTC-specific variants.
23 */
24
25#ifndef CONFIG_MIPS_MT_SMTC
26static int mips_next_event(unsigned long delta,
27 struct clock_event_device *evt)
28{
29 unsigned int cnt;
30 int res;
31
32 cnt = read_c0_count();
33 cnt += delta;
34 write_c0_compare(cnt);
35 res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
36 return res;
37}
38
39#endif /* CONFIG_MIPS_MT_SMTC */
40
41void mips_set_clock_mode(enum clock_event_mode mode,
42 struct clock_event_device *evt)
43{
44 /* Nothing to do ... */
45}
46
47DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
48int cp0_timer_irq_installed;
49
50#ifndef CONFIG_MIPS_MT_SMTC
51irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
52{
53 const int r2 = cpu_has_mips_r2;
54 struct clock_event_device *cd;
55 int cpu = smp_processor_id();
56
57 /*
58 * Suckage alert:
59 * Before R2 of the architecture there was no way to see if a
60 * performance counter interrupt was pending, so we have to run
61 * the performance counter interrupt handler anyway.
62 */
63 if (handle_perf_irq(r2))
64 goto out;
65
66 /*
67 * The same applies to performance counter interrupts. But with the
68 * above we now know that the reason we got here must be a timer
69 * interrupt. Being the paranoiacs we are we check anyway.
70 */
71 if (!r2 || (read_c0_cause() & (1 << 30))) {
72 /* Clear Count/Compare Interrupt */
73 write_c0_compare(read_c0_compare());
74 cd = &per_cpu(mips_clockevent_device, cpu);
75#ifdef CONFIG_CEVT_GIC
76 if (!gic_present)
77#endif
78 cd->event_handler(cd);
79 }
80
81out:
82 return IRQ_HANDLED;
83}
84
85#endif /* Not CONFIG_MIPS_MT_SMTC */
86
87struct irqaction c0_compare_irqaction = {
88 .handler = c0_compare_interrupt,
89 .flags = IRQF_PERCPU | IRQF_TIMER,
90 .name = "timer",
91};
92
93
94void mips_event_handler(struct clock_event_device *dev)
95{
96}
97
98/*
99 * FIXME: This doesn't hold for the relocated E9000 compare interrupt.
100 */
101static int c0_compare_int_pending(void)
102{
103#ifdef CONFIG_IRQ_GIC
104 if (cpu_has_veic)
105 return gic_get_timer_pending();
106#endif
107 return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP);
108}
109
110/*
111 * Compare interrupt can be routed and latched outside the core,
112 * so wait up to worst case number of cycle counter ticks for timer interrupt
113 * changes to propagate to the cause register.
114 */
115#define COMPARE_INT_SEEN_TICKS 50
116
117int c0_compare_int_usable(void)
118{
119 unsigned int delta;
120 unsigned int cnt;
121
122#ifdef CONFIG_KVM_GUEST
123 return 1;
124#endif
125
126 /*
127 * IP7 already pending? Try to clear it by acking the timer.
128 */
129 if (c0_compare_int_pending()) {
130 cnt = read_c0_count();
131 write_c0_compare(cnt);
132 back_to_back_c0_hazard();
133 while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
134 if (!c0_compare_int_pending())
135 break;
136 if (c0_compare_int_pending())
137 return 0;
138 }
139
140 for (delta = 0x10; delta <= 0x400000; delta <<= 1) {
141 cnt = read_c0_count();
142 cnt += delta;
143 write_c0_compare(cnt);
144 back_to_back_c0_hazard();
145 if ((int)(read_c0_count() - cnt) < 0)
146 break;
147 /* increase delta if the timer was already expired */
148 }
149
150 while ((int)(read_c0_count() - cnt) <= 0)
151 ; /* Wait for expiry */
152
153 while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
154 if (c0_compare_int_pending())
155 break;
156 if (!c0_compare_int_pending())
157 return 0;
158 cnt = read_c0_count();
159 write_c0_compare(cnt);
160 back_to_back_c0_hazard();
161 while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
162 if (!c0_compare_int_pending())
163 break;
164 if (c0_compare_int_pending())
165 return 0;
166
167 /*
168 * Feels like a real count / compare timer.
169 */
170 return 1;
171}
172
173#ifndef CONFIG_MIPS_MT_SMTC
174int r4k_clockevent_init(void)
175{
176 unsigned int cpu = smp_processor_id();
177 struct clock_event_device *cd;
178 unsigned int irq;
179
180 if (!cpu_has_counter || !mips_hpt_frequency)
181 return -ENXIO;
182
183 if (!c0_compare_int_usable())
184 return -ENXIO;
185
186 /*
187 * With vectored interrupts things are getting platform specific.
188 * get_c0_compare_int is a hook to allow a platform to return the
189 * interrupt number of it's liking.
190 */
191 irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
192 if (get_c0_compare_int)
193 irq = get_c0_compare_int();
194
195 cd = &per_cpu(mips_clockevent_device, cpu);
196
197 cd->name = "MIPS";
198 cd->features = CLOCK_EVT_FEAT_ONESHOT;
199
200 clockevent_set_clock(cd, mips_hpt_frequency);
201
202 /* Calculate the min / max delta */
203 cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
204 cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
205
206 cd->rating = 300;
207 cd->irq = irq;
208 cd->cpumask = cpumask_of(cpu);
209 cd->set_next_event = mips_next_event;
210 cd->set_mode = mips_set_clock_mode;
211 cd->event_handler = mips_event_handler;
212
213#ifdef CONFIG_CEVT_GIC
214 if (!gic_present)
215#endif
216 clockevents_register_device(cd);
217
218 if (cp0_timer_irq_installed)
219 return 0;
220
221 cp0_timer_irq_installed = 1;
222
223 setup_irq(irq, &c0_compare_irqaction);
224
225 return 0;
226}
227
228#endif /* Not CONFIG_MIPS_MT_SMTC */