1/*
   2 * This program is free software; you can redistribute it and/or
   3 * modify it under the terms of the GNU General Public License
   4 * as published by the Free Software Foundation; either version 2
   5 * of the License, or (at your option) any later version.
   6 *
   7 * This program is distributed in the hope that it will be useful,
   8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
   9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  10 * GNU General Public License for more details.
  11 *
  12 * You should have received a copy of the GNU General Public License
  13 * along with this program; if not, write to the Free Software
  14 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  15 *
  16 * Copyright (C) 2004 Mips Technologies, Inc
  17 * Copyright (C) 2008 Kevin D. Kissell
  18 */
  19
  20#include <linux/clockchips.h>
  21#include <linux/kernel.h>
  22#include <linux/sched.h>
  23#include <linux/smp.h>
  24#include <linux/cpumask.h>
  25#include <linux/interrupt.h>
  26#include <linux/kernel_stat.h>
  27#include <linux/module.h>
  28#include <linux/ftrace.h>
  29#include <linux/slab.h>
  30
  31#include <asm/cpu.h>
  32#include <asm/processor.h>
  33#include <linux/atomic.h>
  34#include <asm/hardirq.h>
  35#include <asm/hazards.h>
  36#include <asm/irq.h>
 
  37#include <asm/mmu_context.h>
  38#include <asm/mipsregs.h>
  39#include <asm/cacheflush.h>
  40#include <asm/time.h>
  41#include <asm/addrspace.h>
  42#include <asm/smtc.h>
  43#include <asm/smtc_proc.h>
 
  44
  45/*
  46 * SMTC Kernel needs to manipulate low-level CPU interrupt mask
  47 * in do_IRQ. These are passed in setup_irq_smtc() and stored
  48 * in this table.
  49 */
  50unsigned long irq_hwmask[NR_IRQS];
  51
  52#define LOCK_MT_PRA() \
  53	local_irq_save(flags); \
  54	mtflags = dmt()
  55
  56#define UNLOCK_MT_PRA() \
  57	emt(mtflags); \
  58	local_irq_restore(flags)
  59
  60#define LOCK_CORE_PRA() \
  61	local_irq_save(flags); \
  62	mtflags = dvpe()
  63
  64#define UNLOCK_CORE_PRA() \
  65	evpe(mtflags); \
  66	local_irq_restore(flags)
  67
  68/*
  69 * Data structures purely associated with SMTC parallelism
  70 */
  71
  72
  73/*
  74 * Table for tracking ASIDs whose lifetime is prolonged.
  75 */
  76
  77asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
  78
  79/*
  80 * Number of InterProcessor Interrupt (IPI) message buffers to allocate
  81 */
  82
  83#define IPIBUF_PER_CPU 4
  84
  85struct smtc_ipi_q IPIQ[NR_CPUS];
  86static struct smtc_ipi_q freeIPIq;
  87
  88
 
 
 
 
 
 
 
  89/* Forward declarations */
  90
  91void ipi_decode(struct smtc_ipi *);
  92static void post_direct_ipi(int cpu, struct smtc_ipi *pipi);
  93static void setup_cross_vpe_interrupts(unsigned int nvpe);
  94void init_smtc_stats(void);
  95
  96/* Global SMTC Status */
  97
  98unsigned int smtc_status;
  99
 100/* Boot command line configuration overrides */
 101
 102static int vpe0limit;
 103static int ipibuffers;
 104static int nostlb;
 105static int asidmask;
 106unsigned long smtc_asid_mask = 0xff;
 107
 108static int __init vpe0tcs(char *str)
 109{
 110	get_option(&str, &vpe0limit);
 111
 112	return 1;
 113}
 114
 115static int __init ipibufs(char *str)
 116{
 117	get_option(&str, &ipibuffers);
 118	return 1;
 119}
 120
 121static int __init stlb_disable(char *s)
 122{
 123	nostlb = 1;
 124	return 1;
 125}
 126
 127static int __init asidmask_set(char *str)
 128{
 129	get_option(&str, &asidmask);
 130	switch (asidmask) {
 131	case 0x1:
 132	case 0x3:
 133	case 0x7:
 134	case 0xf:
 135	case 0x1f:
 136	case 0x3f:
 137	case 0x7f:
 138	case 0xff:
 139		smtc_asid_mask = (unsigned long)asidmask;
 140		break;
 141	default:
 142		printk("ILLEGAL ASID mask 0x%x from command line\n", asidmask);
 143	}
 144	return 1;
 145}
 146
 147__setup("vpe0tcs=", vpe0tcs);
 148__setup("ipibufs=", ipibufs);
 149__setup("nostlb", stlb_disable);
 150__setup("asidmask=", asidmask_set);
 151
 152#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 153
 154static int hang_trig;
 155
 156static int __init hangtrig_enable(char *s)
 157{
 158	hang_trig = 1;
 159	return 1;
 160}
 161
 162
 163__setup("hangtrig", hangtrig_enable);
 164
 165#define DEFAULT_BLOCKED_IPI_LIMIT 32
 166
 167static int timerq_limit = DEFAULT_BLOCKED_IPI_LIMIT;
 168
 169static int __init tintq(char *str)
 170{
 171	get_option(&str, &timerq_limit);
 172	return 1;
 173}
 174
 175__setup("tintq=", tintq);
 176
 177static int imstuckcount[2][8];
 178/* vpemask represents IM/IE bits of per-VPE Status registers, low-to-high */
 179static int vpemask[2][8] = {
 180	{0, 0, 1, 0, 0, 0, 0, 1},
 181	{0, 0, 0, 0, 0, 0, 0, 1}
 182};
 183int tcnoprog[NR_CPUS];
 184static atomic_t idle_hook_initialized = ATOMIC_INIT(0);
 185static int clock_hang_reported[NR_CPUS];
 186
 187#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
 188
 189/*
 190 * Configure shared TLB - VPC configuration bit must be set by caller
 191 */
 192
 193static void smtc_configure_tlb(void)
 194{
 195	int i, tlbsiz, vpes;
 196	unsigned long mvpconf0;
 197	unsigned long config1val;
 198
 199	/* Set up ASID preservation table */
 200	for (vpes=0; vpes<MAX_SMTC_TLBS; vpes++) {
 201	    for(i = 0; i < MAX_SMTC_ASIDS; i++) {
 202		smtc_live_asid[vpes][i] = 0;
 203	    }
 204	}
 205	mvpconf0 = read_c0_mvpconf0();
 206
 207	if ((vpes = ((mvpconf0 & MVPCONF0_PVPE)
 208			>> MVPCONF0_PVPE_SHIFT) + 1) > 1) {
 209	    /* If we have multiple VPEs, try to share the TLB */
 210	    if ((mvpconf0 & MVPCONF0_TLBS) && !nostlb) {
 211		/*
 212		 * If TLB sizing is programmable, shared TLB
 213		 * size is the total available complement.
 214		 * Otherwise, we have to take the sum of all
 215		 * static VPE TLB entries.
 216		 */
 217		if ((tlbsiz = ((mvpconf0 & MVPCONF0_PTLBE)
 218				>> MVPCONF0_PTLBE_SHIFT)) == 0) {
 219		    /*
 220		     * If there's more than one VPE, there had better
 221		     * be more than one TC, because we need one to bind
 222		     * to each VPE in turn to be able to read
 223		     * its configuration state!
 224		     */
 225		    settc(1);
 226		    /* Stop the TC from doing anything foolish */
 227		    write_tc_c0_tchalt(TCHALT_H);
 228		    mips_ihb();
 229		    /* No need to un-Halt - that happens later anyway */
 230		    for (i=0; i < vpes; i++) {
 231		    	write_tc_c0_tcbind(i);
 232			/*
 233			 * To be 100% sure we're really getting the right
 234			 * information, we exit the configuration state
 235			 * and do an IHB after each rebinding.
 236			 */
 237			write_c0_mvpcontrol(
 238				read_c0_mvpcontrol() & ~ MVPCONTROL_VPC );
 239			mips_ihb();
 240			/*
 241			 * Only count if the MMU Type indicated is TLB
 242			 */
 243			if (((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
 244				config1val = read_vpe_c0_config1();
 245				tlbsiz += ((config1val >> 25) & 0x3f) + 1;
 246			}
 247
 248			/* Put core back in configuration state */
 249			write_c0_mvpcontrol(
 250				read_c0_mvpcontrol() | MVPCONTROL_VPC );
 251			mips_ihb();
 252		    }
 253		}
 254		write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB);
 255		ehb();
 256
 257		/*
 258		 * Setup kernel data structures to use software total,
 259		 * rather than read the per-VPE Config1 value. The values
 260		 * for "CPU 0" gets copied to all the other CPUs as part
 261		 * of their initialization in smtc_cpu_setup().
 262		 */
 263
 264		/* MIPS32 limits TLB indices to 64 */
 265		if (tlbsiz > 64)
 266			tlbsiz = 64;
 267		cpu_data[0].tlbsize = current_cpu_data.tlbsize = tlbsiz;
 268		smtc_status |= SMTC_TLB_SHARED;
 269		local_flush_tlb_all();
 270
 271		printk("TLB of %d entry pairs shared by %d VPEs\n",
 272			tlbsiz, vpes);
 273	    } else {
 274		printk("WARNING: TLB Not Sharable on SMTC Boot!\n");
 275	    }
 276	}
 277}
 278
 279
 280/*
 281 * Incrementally build the CPU map out of constituent MIPS MT cores,
 282 * using the specified available VPEs and TCs.  Plaform code needs
 283 * to ensure that each MIPS MT core invokes this routine on reset,
 284 * one at a time(!).
 285 *
 286 * This version of the build_cpu_map and prepare_cpus routines assumes
 287 * that *all* TCs of a MIPS MT core will be used for Linux, and that
 288 * they will be spread across *all* available VPEs (to minimise the
 289 * loss of efficiency due to exception service serialization).
 290 * An improved version would pick up configuration information and
 291 * possibly leave some TCs/VPEs as "slave" processors.
 292 *
 293 * Use c0_MVPConf0 to find out how many TCs are available, setting up
 294 * cpu_possible_mask and the logical/physical mappings.
 295 */
 296
 297int __init smtc_build_cpu_map(int start_cpu_slot)
 298{
 299	int i, ntcs;
 300
 301	/*
 302	 * The CPU map isn't actually used for anything at this point,
 303	 * so it's not clear what else we should do apart from set
 304	 * everything up so that "logical" = "physical".
 305	 */
 306	ntcs = ((read_c0_mvpconf0() & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
 307	for (i=start_cpu_slot; i<NR_CPUS && i<ntcs; i++) {
 308		set_cpu_possible(i, true);
 309		__cpu_number_map[i] = i;
 310		__cpu_logical_map[i] = i;
 311	}
 312#ifdef CONFIG_MIPS_MT_FPAFF
 313	/* Initialize map of CPUs with FPUs */
 314	cpus_clear(mt_fpu_cpumask);
 315#endif
 316
 317	/* One of those TC's is the one booting, and not a secondary... */
 318	printk("%i available secondary CPU TC(s)\n", i - 1);
 319
 320	return i;
 321}
 322
 323/*
 324 * Common setup before any secondaries are started
 325 * Make sure all CPUs are in a sensible state before we boot any of the
 326 * secondaries.
 327 *
 328 * For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly
 329 * as possible across the available VPEs.
 330 */
 331
 332static void smtc_tc_setup(int vpe, int tc, int cpu)
 333{
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 334	settc(tc);
 335	write_tc_c0_tchalt(TCHALT_H);
 336	mips_ihb();
 337	write_tc_c0_tcstatus((read_tc_c0_tcstatus()
 338			& ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT))
 339			| TCSTATUS_A);
 340	/*
 341	 * TCContext gets an offset from the base of the IPIQ array
 342	 * to be used in low-level code to detect the presence of
 343	 * an active IPI queue.
 344	 */
 345	write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
 346	/* Bind tc to vpe */
 
 347	write_tc_c0_tcbind(vpe);
 
 348	/* In general, all TCs should have the same cpu_data indications. */
 349	memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips));
 350	/* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */
 351	if (cpu_data[0].cputype == CPU_34K ||
 352	    cpu_data[0].cputype == CPU_1004K)
 353		cpu_data[cpu].options &= ~MIPS_CPU_FPU;
 
 
 
 
 354	cpu_data[cpu].vpe_id = vpe;
 355	cpu_data[cpu].tc_id = tc;
 356	/* Multi-core SMTC hasn't been tested, but be prepared */
 
 357	cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff;
 358}
 359
 360/*
 361 * Tweak to get Count registes in as close a sync as possible.  The
 362 * value seems good for 34K-class cores.
 363 */
 364
 365#define CP0_SKEW 8
 366
 367void smtc_prepare_cpus(int cpus)
 368{
 369	int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu;
 370	unsigned long flags;
 371	unsigned long val;
 372	int nipi;
 373	struct smtc_ipi *pipi;
 374
 375	/* disable interrupts so we can disable MT */
 376	local_irq_save(flags);
 377	/* disable MT so we can configure */
 378	dvpe();
 379	dmt();
 380
 381	spin_lock_init(&freeIPIq.lock);
 382
 383	/*
 384	 * We probably don't have as many VPEs as we do SMP "CPUs",
 385	 * but it's possible - and in any case we'll never use more!
 386	 */
 387	for (i=0; i<NR_CPUS; i++) {
 388		IPIQ[i].head = IPIQ[i].tail = NULL;
 389		spin_lock_init(&IPIQ[i].lock);
 390		IPIQ[i].depth = 0;
 391		IPIQ[i].resched_flag = 0; /* No reschedules queued initially */
 392	}
 393
 394	/* cpu_data index starts at zero */
 395	cpu = 0;
 396	cpu_data[cpu].vpe_id = 0;
 397	cpu_data[cpu].tc_id = 0;
 398	cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff;
 399	cpu++;
 400
 401	/* Report on boot-time options */
 402	mips_mt_set_cpuoptions();
 403	if (vpelimit > 0)
 404		printk("Limit of %d VPEs set\n", vpelimit);
 405	if (tclimit > 0)
 406		printk("Limit of %d TCs set\n", tclimit);
 407	if (nostlb) {
 408		printk("Shared TLB Use Inhibited - UNSAFE for Multi-VPE Operation\n");
 409	}
 410	if (asidmask)
 411		printk("ASID mask value override to 0x%x\n", asidmask);
 412
 413	/* Temporary */
 414#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 415	if (hang_trig)
 416		printk("Logic Analyser Trigger on suspected TC hang\n");
 417#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
 418
 419	/* Put MVPE's into 'configuration state' */
 420	write_c0_mvpcontrol( read_c0_mvpcontrol() | MVPCONTROL_VPC );
 421
 422	val = read_c0_mvpconf0();
 423	nvpe = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
 424	if (vpelimit > 0 && nvpe > vpelimit)
 425		nvpe = vpelimit;
 426	ntc = ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
 427	if (ntc > NR_CPUS)
 428		ntc = NR_CPUS;
 429	if (tclimit > 0 && ntc > tclimit)
 430		ntc = tclimit;
 431	slop = ntc % nvpe;
 432	for (i = 0; i < nvpe; i++) {
 433		tcpervpe[i] = ntc / nvpe;
 434		if (slop) {
 435			if((slop - i) > 0) tcpervpe[i]++;
 436		}
 437	}
 438	/* Handle command line override for VPE0 */
 439	if (vpe0limit > ntc) vpe0limit = ntc;
 440	if (vpe0limit > 0) {
 441		int slopslop;
 442		if (vpe0limit < tcpervpe[0]) {
 443		    /* Reducing TC count - distribute to others */
 444		    slop = tcpervpe[0] - vpe0limit;
 445		    slopslop = slop % (nvpe - 1);
 446		    tcpervpe[0] = vpe0limit;
 447		    for (i = 1; i < nvpe; i++) {
 448			tcpervpe[i] += slop / (nvpe - 1);
 449			if(slopslop && ((slopslop - (i - 1) > 0)))
 450				tcpervpe[i]++;
 451		    }
 452		} else if (vpe0limit > tcpervpe[0]) {
 453		    /* Increasing TC count - steal from others */
 454		    slop = vpe0limit - tcpervpe[0];
 455		    slopslop = slop % (nvpe - 1);
 456		    tcpervpe[0] = vpe0limit;
 457		    for (i = 1; i < nvpe; i++) {
 458			tcpervpe[i] -= slop / (nvpe - 1);
 459			if(slopslop && ((slopslop - (i - 1) > 0)))
 460				tcpervpe[i]--;
 461		    }
 462		}
 463	}
 464
 465	/* Set up shared TLB */
 466	smtc_configure_tlb();
 467
 468	for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) {
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 469		if (tcpervpe[vpe] == 0)
 470			continue;
 471		if (vpe != 0)
 472			printk(", ");
 473		printk("VPE %d: TC", vpe);
 474		for (i = 0; i < tcpervpe[vpe]; i++) {
 475			/*
 476			 * TC 0 is bound to VPE 0 at reset,
 477			 * and is presumably executing this
 478			 * code.  Leave it alone!
 479			 */
 480			if (tc != 0) {
 481				smtc_tc_setup(vpe, tc, cpu);
 
 
 
 
 
 
 
 
 
 
 
 
 482				cpu++;
 483			}
 484			printk(" %d", tc);
 485			tc++;
 486		}
 487		if (vpe != 0) {
 488			/*
 489			 * Allow this VPE to control others.
 490			 */
 491			write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() |
 492					      VPECONF0_MVP);
 493
 494			/*
 495			 * Clear any stale software interrupts from VPE's Cause
 496			 */
 497			write_vpe_c0_cause(0);
 498
 499			/*
 500			 * Clear ERL/EXL of VPEs other than 0
 501			 * and set restricted interrupt enable/mask.
 502			 */
 503			write_vpe_c0_status((read_vpe_c0_status()
 504				& ~(ST0_BEV | ST0_ERL | ST0_EXL | ST0_IM))
 505				| (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7
 506				| ST0_IE));
 507			/*
 508			 * set config to be the same as vpe0,
 509			 *  particularly kseg0 coherency alg
 510			 */
 511			write_vpe_c0_config(read_c0_config());
 512			/* Clear any pending timer interrupt */
 513			write_vpe_c0_compare(0);
 514			/* Propagate Config7 */
 515			write_vpe_c0_config7(read_c0_config7());
 516			write_vpe_c0_count(read_c0_count() + CP0_SKEW);
 517			ehb();
 518		}
 519		/* enable multi-threading within VPE */
 520		write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE);
 521		/* enable the VPE */
 522		write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
 523	}
 524
 525	/*
 526	 * Pull any physically present but unused TCs out of circulation.
 527	 */
 528	while (tc < (((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1)) {
 529		set_cpu_possible(tc, false);
 530		set_cpu_present(tc, false);
 531		tc++;
 532	}
 533
 534	/* release config state */
 535	write_c0_mvpcontrol( read_c0_mvpcontrol() & ~ MVPCONTROL_VPC );
 536
 537	printk("\n");
 538
 539	/* Set up coprocessor affinity CPU mask(s) */
 540
 541#ifdef CONFIG_MIPS_MT_FPAFF
 542	for (tc = 0; tc < ntc; tc++) {
 543		if (cpu_data[tc].options & MIPS_CPU_FPU)
 544			cpu_set(tc, mt_fpu_cpumask);
 545	}
 546#endif
 547
 548	/* set up ipi interrupts... */
 549
 550	/* If we have multiple VPEs running, set up the cross-VPE interrupt */
 551
 552	setup_cross_vpe_interrupts(nvpe);
 553
 554	/* Set up queue of free IPI "messages". */
 555	nipi = NR_CPUS * IPIBUF_PER_CPU;
 556	if (ipibuffers > 0)
 557		nipi = ipibuffers;
 558
 559	pipi = kmalloc(nipi *sizeof(struct smtc_ipi), GFP_KERNEL);
 560	if (pipi == NULL)
 561		panic("kmalloc of IPI message buffers failed");
 562	else
 563		printk("IPI buffer pool of %d buffers\n", nipi);
 564	for (i = 0; i < nipi; i++) {
 565		smtc_ipi_nq(&freeIPIq, pipi);
 566		pipi++;
 567	}
 568
 569	/* Arm multithreading and enable other VPEs - but all TCs are Halted */
 570	emt(EMT_ENABLE);
 571	evpe(EVPE_ENABLE);
 572	local_irq_restore(flags);
 573	/* Initialize SMTC /proc statistics/diagnostics */
 574	init_smtc_stats();
 575}
 576
 577
 578/*
 579 * Setup the PC, SP, and GP of a secondary processor and start it
 580 * running!
 581 * smp_bootstrap is the place to resume from
 582 * __KSTK_TOS(idle) is apparently the stack pointer
 583 * (unsigned long)idle->thread_info the gp
 584 *
 585 */
 586void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
 587{
 588	extern u32 kernelsp[NR_CPUS];
 589	unsigned long flags;
 590	int mtflags;
 591
 592	LOCK_MT_PRA();
 593	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
 594		dvpe();
 595	}
 596	settc(cpu_data[cpu].tc_id);
 597
 598	/* pc */
 599	write_tc_c0_tcrestart((unsigned long)&smp_bootstrap);
 600
 601	/* stack pointer */
 602	kernelsp[cpu] = __KSTK_TOS(idle);
 603	write_tc_gpr_sp(__KSTK_TOS(idle));
 604
 605	/* global pointer */
 606	write_tc_gpr_gp((unsigned long)task_thread_info(idle));
 607
 608	smtc_status |= SMTC_MTC_ACTIVE;
 609	write_tc_c0_tchalt(0);
 610	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
 611		evpe(EVPE_ENABLE);
 612	}
 613	UNLOCK_MT_PRA();
 614}
 615
 616void smtc_init_secondary(void)
 617{
 618}
 619
 620void smtc_smp_finish(void)
 621{
 622	int cpu = smp_processor_id();
 623
 624	/*
 625	 * Lowest-numbered CPU per VPE starts a clock tick.
 626	 * Like per_cpu_trap_init() hack, this assumes that
 627	 * SMTC init code assigns TCs consdecutively and
 628	 * in ascending order across available VPEs.
 629	 */
 630	if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
 631		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
 632
 633	local_irq_enable();
 634
 635	printk("TC %d going on-line as CPU %d\n",
 636		cpu_data[smp_processor_id()].tc_id, smp_processor_id());
 637}
 638
 639void smtc_cpus_done(void)
 640{
 641}
 642
 643/*
 644 * Support for SMTC-optimized driver IRQ registration
 645 */
 646
 647/*
 648 * SMTC Kernel needs to manipulate low-level CPU interrupt mask
 649 * in do_IRQ. These are passed in setup_irq_smtc() and stored
 650 * in this table.
 651 */
 652
 653int setup_irq_smtc(unsigned int irq, struct irqaction * new,
 654			unsigned long hwmask)
 655{
 656#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 657	unsigned int vpe = current_cpu_data.vpe_id;
 658
 659	vpemask[vpe][irq - MIPS_CPU_IRQ_BASE] = 1;
 660#endif
 661	irq_hwmask[irq] = hwmask;
 662
 663	return setup_irq(irq, new);
 664}
 665
 666#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
 667/*
 668 * Support for IRQ affinity to TCs
 669 */
 670
 671void smtc_set_irq_affinity(unsigned int irq, cpumask_t affinity)
 672{
 673	/*
 674	 * If a "fast path" cache of quickly decodable affinity state
 675	 * is maintained, this is where it gets done, on a call up
 676	 * from the platform affinity code.
 677	 */
 678}
 679
 680void smtc_forward_irq(struct irq_data *d)
 681{
 682	unsigned int irq = d->irq;
 683	int target;
 684
 685	/*
 686	 * OK wise guy, now figure out how to get the IRQ
 687	 * to be serviced on an authorized "CPU".
 688	 *
 689	 * Ideally, to handle the situation where an IRQ has multiple
 690	 * eligible CPUS, we would maintain state per IRQ that would
 691	 * allow a fair distribution of service requests.  Since the
 692	 * expected use model is any-or-only-one, for simplicity
 693	 * and efficiency, we just pick the easiest one to find.
 694	 */
 695
 696	target = cpumask_first(d->affinity);
 697
 698	/*
 699	 * We depend on the platform code to have correctly processed
 700	 * IRQ affinity change requests to ensure that the IRQ affinity
 701	 * mask has been purged of bits corresponding to nonexistent and
 702	 * offline "CPUs", and to TCs bound to VPEs other than the VPE
 703	 * connected to the physical interrupt input for the interrupt
 704	 * in question.  Otherwise we have a nasty problem with interrupt
 705	 * mask management.  This is best handled in non-performance-critical
 706	 * platform IRQ affinity setting code,  to minimize interrupt-time
 707	 * checks.
 708	 */
 709
 710	/* If no one is eligible, service locally */
 711	if (target >= NR_CPUS)
 712		do_IRQ_no_affinity(irq);
 713	else
 714		smtc_send_ipi(target, IRQ_AFFINITY_IPI, irq);
 715}
 716
 717#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
 718
 719/*
 720 * IPI model for SMTC is tricky, because interrupts aren't TC-specific.
 721 * Within a VPE one TC can interrupt another by different approaches.
 722 * The easiest to get right would probably be to make all TCs except
 723 * the target IXMT and set a software interrupt, but an IXMT-based
 724 * scheme requires that a handler must run before a new IPI could
 725 * be sent, which would break the "broadcast" loops in MIPS MT.
 726 * A more gonzo approach within a VPE is to halt the TC, extract
 727 * its Restart, Status, and a couple of GPRs, and program the Restart
 728 * address to emulate an interrupt.
 729 *
 730 * Within a VPE, one can be confident that the target TC isn't in
 731 * a critical EXL state when halted, since the write to the Halt
 732 * register could not have issued on the writing thread if the
 733 * halting thread had EXL set. So k0 and k1 of the target TC
 734 * can be used by the injection code.  Across VPEs, one can't
 735 * be certain that the target TC isn't in a critical exception
 736 * state. So we try a two-step process of sending a software
 737 * interrupt to the target VPE, which either handles the event
 738 * itself (if it was the target) or injects the event within
 739 * the VPE.
 740 */
 741
 742static void smtc_ipi_qdump(void)
 743{
 744	int i;
 745	struct smtc_ipi *temp;
 746
 747	for (i = 0; i < NR_CPUS ;i++) {
 748		pr_info("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n",
 749			i, (unsigned)IPIQ[i].head, (unsigned)IPIQ[i].tail,
 750			IPIQ[i].depth);
 751		temp = IPIQ[i].head;
 752
 753		while (temp != IPIQ[i].tail) {
 754			pr_debug("%d %d %d: ", temp->type, temp->dest,
 755			       (int)temp->arg);
 756#ifdef	SMTC_IPI_DEBUG
 757		    pr_debug("%u %lu\n", temp->sender, temp->stamp);
 758#else
 759		    pr_debug("\n");
 760#endif
 761		    temp = temp->flink;
 762		}
 763	}
 764}
 765
 766/*
 767 * The standard atomic.h primitives don't quite do what we want
 768 * here: We need an atomic add-and-return-previous-value (which
 769 * could be done with atomic_add_return and a decrement) and an
 770 * atomic set/zero-and-return-previous-value (which can't really
 771 * be done with the atomic.h primitives). And since this is
 772 * MIPS MT, we can assume that we have LL/SC.
 773 */
 774static inline int atomic_postincrement(atomic_t *v)
 775{
 776	unsigned long result;
 777
 778	unsigned long temp;
 779
 780	__asm__ __volatile__(
 781	"1:	ll	%0, %2					\n"
 782	"	addu	%1, %0, 1				\n"
 783	"	sc	%1, %2					\n"
 784	"	beqz	%1, 1b					\n"
 785	__WEAK_LLSC_MB
 786	: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 787	: "m" (v->counter)
 788	: "memory");
 789
 790	return result;
 791}
 792
 793void smtc_send_ipi(int cpu, int type, unsigned int action)
 794{
 795	int tcstatus;
 796	struct smtc_ipi *pipi;
 797	unsigned long flags;
 798	int mtflags;
 799	unsigned long tcrestart;
 800	extern void r4k_wait_irqoff(void), __pastwait(void);
 801	int set_resched_flag = (type == LINUX_SMP_IPI &&
 802				action == SMP_RESCHEDULE_YOURSELF);
 803
 804	if (cpu == smp_processor_id()) {
 805		printk("Cannot Send IPI to self!\n");
 806		return;
 807	}
 808	if (set_resched_flag && IPIQ[cpu].resched_flag != 0)
 809		return; /* There is a reschedule queued already */
 810
 811	/* Set up a descriptor, to be delivered either promptly or queued */
 812	pipi = smtc_ipi_dq(&freeIPIq);
 813	if (pipi == NULL) {
 814		bust_spinlocks(1);
 815		mips_mt_regdump(dvpe());
 816		panic("IPI Msg. Buffers Depleted");
 817	}
 818	pipi->type = type;
 819	pipi->arg = (void *)action;
 820	pipi->dest = cpu;
 821	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
 822		/* If not on same VPE, enqueue and send cross-VPE interrupt */
 823		IPIQ[cpu].resched_flag |= set_resched_flag;
 824		smtc_ipi_nq(&IPIQ[cpu], pipi);
 825		LOCK_CORE_PRA();
 826		settc(cpu_data[cpu].tc_id);
 827		write_vpe_c0_cause(read_vpe_c0_cause() | C_SW1);
 828		UNLOCK_CORE_PRA();
 829	} else {
 830		/*
 831		 * Not sufficient to do a LOCK_MT_PRA (dmt) here,
 832		 * since ASID shootdown on the other VPE may
 833		 * collide with this operation.
 834		 */
 835		LOCK_CORE_PRA();
 836		settc(cpu_data[cpu].tc_id);
 837		/* Halt the targeted TC */
 838		write_tc_c0_tchalt(TCHALT_H);
 839		mips_ihb();
 840
 841		/*
 842	 	 * Inspect TCStatus - if IXMT is set, we have to queue
 843		 * a message. Otherwise, we set up the "interrupt"
 844		 * of the other TC
 845	 	 */
 846		tcstatus = read_tc_c0_tcstatus();
 847
 848		if ((tcstatus & TCSTATUS_IXMT) != 0) {
 849			/*
 850			 * If we're in the the irq-off version of the wait
 851			 * loop, we need to force exit from the wait and
 852			 * do a direct post of the IPI.
 853			 */
 854			if (cpu_wait == r4k_wait_irqoff) {
 855				tcrestart = read_tc_c0_tcrestart();
 856				if (tcrestart >= (unsigned long)r4k_wait_irqoff
 857				    && tcrestart < (unsigned long)__pastwait) {
 858					write_tc_c0_tcrestart(__pastwait);
 859					tcstatus &= ~TCSTATUS_IXMT;
 860					write_tc_c0_tcstatus(tcstatus);
 861					goto postdirect;
 862				}
 863			}
 864			/*
 865			 * Otherwise we queue the message for the target TC
 866			 * to pick up when he does a local_irq_restore()
 867			 */
 868			write_tc_c0_tchalt(0);
 869			UNLOCK_CORE_PRA();
 870			IPIQ[cpu].resched_flag |= set_resched_flag;
 871			smtc_ipi_nq(&IPIQ[cpu], pipi);
 872		} else {
 873postdirect:
 874			post_direct_ipi(cpu, pipi);
 875			write_tc_c0_tchalt(0);
 876			UNLOCK_CORE_PRA();
 877		}
 878	}
 879}
 880
 881/*
 882 * Send IPI message to Halted TC, TargTC/TargVPE already having been set
 883 */
 884static void post_direct_ipi(int cpu, struct smtc_ipi *pipi)
 885{
 886	struct pt_regs *kstack;
 887	unsigned long tcstatus;
 888	unsigned long tcrestart;
 889	extern u32 kernelsp[NR_CPUS];
 890	extern void __smtc_ipi_vector(void);
 891//printk("%s: on %d for %d\n", __func__, smp_processor_id(), cpu);
 892
 893	/* Extract Status, EPC from halted TC */
 894	tcstatus = read_tc_c0_tcstatus();
 895	tcrestart = read_tc_c0_tcrestart();
 896	/* If TCRestart indicates a WAIT instruction, advance the PC */
 897	if ((tcrestart & 0x80000000)
 898	    && ((*(unsigned int *)tcrestart & 0xfe00003f) == 0x42000020)) {
 899		tcrestart += 4;
 900	}
 901	/*
 902	 * Save on TC's future kernel stack
 903	 *
 904	 * CU bit of Status is indicator that TC was
 905	 * already running on a kernel stack...
 906	 */
 907	if (tcstatus & ST0_CU0)  {
 908		/* Note that this "- 1" is pointer arithmetic */
 909		kstack = ((struct pt_regs *)read_tc_gpr_sp()) - 1;
 910	} else {
 911		kstack = ((struct pt_regs *)kernelsp[cpu]) - 1;
 912	}
 913
 914	kstack->cp0_epc = (long)tcrestart;
 915	/* Save TCStatus */
 916	kstack->cp0_tcstatus = tcstatus;
 917	/* Pass token of operation to be performed kernel stack pad area */
 918	kstack->pad0[4] = (unsigned long)pipi;
 919	/* Pass address of function to be called likewise */
 920	kstack->pad0[5] = (unsigned long)&ipi_decode;
 921	/* Set interrupt exempt and kernel mode */
 922	tcstatus |= TCSTATUS_IXMT;
 923	tcstatus &= ~TCSTATUS_TKSU;
 924	write_tc_c0_tcstatus(tcstatus);
 925	ehb();
 926	/* Set TC Restart address to be SMTC IPI vector */
 927	write_tc_c0_tcrestart(__smtc_ipi_vector);
 928}
 929
 930static void ipi_resched_interrupt(void)
 931{
 932	scheduler_ipi();
 933}
 934
 935static void ipi_call_interrupt(void)
 936{
 937	/* Invoke generic function invocation code in smp.c */
 938	smp_call_function_interrupt();
 939}
 940
 941DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
 942
 943static void __irq_entry smtc_clock_tick_interrupt(void)
 944{
 945	unsigned int cpu = smp_processor_id();
 946	struct clock_event_device *cd;
 947	int irq = MIPS_CPU_IRQ_BASE + 1;
 948
 949	irq_enter();
 950	kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
 951	cd = &per_cpu(mips_clockevent_device, cpu);
 952	cd->event_handler(cd);
 953	irq_exit();
 954}
 955
 956void ipi_decode(struct smtc_ipi *pipi)
 957{
 958	void *arg_copy = pipi->arg;
 959	int type_copy = pipi->type;
 960
 961	smtc_ipi_nq(&freeIPIq, pipi);
 962
 963	switch (type_copy) {
 964	case SMTC_CLOCK_TICK:
 965		smtc_clock_tick_interrupt();
 966		break;
 967
 968	case LINUX_SMP_IPI:
 969		switch ((int)arg_copy) {
 970		case SMP_RESCHEDULE_YOURSELF:
 971			ipi_resched_interrupt();
 972			break;
 973		case SMP_CALL_FUNCTION:
 974			ipi_call_interrupt();
 975			break;
 976		default:
 977			printk("Impossible SMTC IPI Argument %p\n", arg_copy);
 978			break;
 979		}
 980		break;
 981#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
 982	case IRQ_AFFINITY_IPI:
 983		/*
 984		 * Accept a "forwarded" interrupt that was initially
 985		 * taken by a TC who doesn't have affinity for the IRQ.
 986		 */
 987		do_IRQ_no_affinity((int)arg_copy);
 988		break;
 989#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
 990	default:
 991		printk("Impossible SMTC IPI Type 0x%x\n", type_copy);
 992		break;
 993	}
 994}
 995
 996/*
 997 * Similar to smtc_ipi_replay(), but invoked from context restore,
 998 * so it reuses the current exception frame rather than set up a
 999 * new one with self_ipi.
1000 */
1001
1002void deferred_smtc_ipi(void)
1003{
1004	int cpu = smp_processor_id();
1005
1006	/*
1007	 * Test is not atomic, but much faster than a dequeue,
1008	 * and the vast majority of invocations will have a null queue.
1009	 * If irq_disabled when this was called, then any IPIs queued
1010	 * after we test last will be taken on the next irq_enable/restore.
1011	 * If interrupts were enabled, then any IPIs added after the
1012	 * last test will be taken directly.
1013	 */
1014
1015	while (IPIQ[cpu].head != NULL) {
1016		struct smtc_ipi_q *q = &IPIQ[cpu];
1017		struct smtc_ipi *pipi;
1018		unsigned long flags;
1019
1020		/*
1021		 * It may be possible we'll come in with interrupts
1022		 * already enabled.
1023		 */
1024		local_irq_save(flags);
1025		spin_lock(&q->lock);
1026		pipi = __smtc_ipi_dq(q);
1027		spin_unlock(&q->lock);
1028		if (pipi != NULL) {
1029			if (pipi->type == LINUX_SMP_IPI &&
1030			    (int)pipi->arg == SMP_RESCHEDULE_YOURSELF)
1031				IPIQ[cpu].resched_flag = 0;
1032			ipi_decode(pipi);
1033		}
1034		/*
1035		 * The use of the __raw_local restore isn't
1036		 * as obviously necessary here as in smtc_ipi_replay(),
1037		 * but it's more efficient, given that we're already
1038		 * running down the IPI queue.
1039		 */
1040		__arch_local_irq_restore(flags);
1041	}
1042}
1043
1044/*
1045 * Cross-VPE interrupts in the SMTC prototype use "software interrupts"
1046 * set via cross-VPE MTTR manipulation of the Cause register. It would be
1047 * in some regards preferable to have external logic for "doorbell" hardware
1048 * interrupts.
1049 */
1050
1051static int cpu_ipi_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_IRQ;
1052
1053static irqreturn_t ipi_interrupt(int irq, void *dev_idm)
1054{
1055	int my_vpe = cpu_data[smp_processor_id()].vpe_id;
1056	int my_tc = cpu_data[smp_processor_id()].tc_id;
1057	int cpu;
1058	struct smtc_ipi *pipi;
1059	unsigned long tcstatus;
1060	int sent;
1061	unsigned long flags;
1062	unsigned int mtflags;
1063	unsigned int vpflags;
1064
1065	/*
1066	 * So long as cross-VPE interrupts are done via
1067	 * MFTR/MTTR read-modify-writes of Cause, we need
1068	 * to stop other VPEs whenever the local VPE does
1069	 * anything similar.
1070	 */
1071	local_irq_save(flags);
1072	vpflags = dvpe();
1073	clear_c0_cause(0x100 << MIPS_CPU_IPI_IRQ);
1074	set_c0_status(0x100 << MIPS_CPU_IPI_IRQ);
1075	irq_enable_hazard();
1076	evpe(vpflags);
1077	local_irq_restore(flags);
1078
1079	/*
1080	 * Cross-VPE Interrupt handler: Try to directly deliver IPIs
1081	 * queued for TCs on this VPE other than the current one.
1082	 * Return-from-interrupt should cause us to drain the queue
1083	 * for the current TC, so we ought not to have to do it explicitly here.
1084	 */
1085
1086	for_each_online_cpu(cpu) {
1087		if (cpu_data[cpu].vpe_id != my_vpe)
1088			continue;
1089
1090		pipi = smtc_ipi_dq(&IPIQ[cpu]);
1091		if (pipi != NULL) {
1092			if (cpu_data[cpu].tc_id != my_tc) {
1093				sent = 0;
1094				LOCK_MT_PRA();
1095				settc(cpu_data[cpu].tc_id);
1096				write_tc_c0_tchalt(TCHALT_H);
1097				mips_ihb();
1098				tcstatus = read_tc_c0_tcstatus();
1099				if ((tcstatus & TCSTATUS_IXMT) == 0) {
1100					post_direct_ipi(cpu, pipi);
1101					sent = 1;
1102				}
1103				write_tc_c0_tchalt(0);
1104				UNLOCK_MT_PRA();
1105				if (!sent) {
1106					smtc_ipi_req(&IPIQ[cpu], pipi);
1107				}
1108			} else {
1109				/*
1110				 * ipi_decode() should be called
1111				 * with interrupts off
1112				 */
1113				local_irq_save(flags);
1114				if (pipi->type == LINUX_SMP_IPI &&
1115				    (int)pipi->arg == SMP_RESCHEDULE_YOURSELF)
1116					IPIQ[cpu].resched_flag = 0;
1117				ipi_decode(pipi);
1118				local_irq_restore(flags);
1119			}
1120		}
1121	}
1122
1123	return IRQ_HANDLED;
1124}
1125
1126static void ipi_irq_dispatch(void)
1127{
1128	do_IRQ(cpu_ipi_irq);
1129}
1130
1131static struct irqaction irq_ipi = {
1132	.handler	= ipi_interrupt,
1133	.flags		= IRQF_PERCPU,
1134	.name		= "SMTC_IPI"
1135};
1136
1137static void setup_cross_vpe_interrupts(unsigned int nvpe)
1138{
1139	if (nvpe < 1)
1140		return;
1141
1142	if (!cpu_has_vint)
1143		panic("SMTC Kernel requires Vectored Interrupt support");
1144
1145	set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch);
1146
1147	setup_irq_smtc(cpu_ipi_irq, &irq_ipi, (0x100 << MIPS_CPU_IPI_IRQ));
1148
1149	irq_set_handler(cpu_ipi_irq, handle_percpu_irq);
1150}
1151
1152/*
1153 * SMTC-specific hacks invoked from elsewhere in the kernel.
1154 */
1155
1156 /*
1157  * smtc_ipi_replay is called from raw_local_irq_restore
1158  */
1159
1160void smtc_ipi_replay(void)
1161{
1162	unsigned int cpu = smp_processor_id();
1163
1164	/*
1165	 * To the extent that we've ever turned interrupts off,
1166	 * we may have accumulated deferred IPIs.  This is subtle.
1167	 * we should be OK:  If we pick up something and dispatch
1168	 * it here, that's great. If we see nothing, but concurrent
1169	 * with this operation, another TC sends us an IPI, IXMT
1170	 * is clear, and we'll handle it as a real pseudo-interrupt
1171	 * and not a pseudo-pseudo interrupt.  The important thing
1172	 * is to do the last check for queued message *after* the
1173	 * re-enabling of interrupts.
1174	 */
1175	while (IPIQ[cpu].head != NULL) {
1176		struct smtc_ipi_q *q = &IPIQ[cpu];
1177		struct smtc_ipi *pipi;
1178		unsigned long flags;
1179
1180		/*
1181		 * It's just possible we'll come in with interrupts
1182		 * already enabled.
1183		 */
1184		local_irq_save(flags);
1185
1186		spin_lock(&q->lock);
1187		pipi = __smtc_ipi_dq(q);
1188		spin_unlock(&q->lock);
1189		/*
1190		 ** But use a raw restore here to avoid recursion.
1191		 */
1192		__arch_local_irq_restore(flags);
1193
1194		if (pipi) {
1195			self_ipi(pipi);
1196			smtc_cpu_stats[cpu].selfipis++;
1197		}
1198	}
1199}
1200
1201EXPORT_SYMBOL(smtc_ipi_replay);
1202
1203void smtc_idle_loop_hook(void)
1204{
1205#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
1206	int im;
1207	int flags;
1208	int mtflags;
1209	int bit;
1210	int vpe;
1211	int tc;
1212	int hook_ntcs;
1213	/*
1214	 * printk within DMT-protected regions can deadlock,
1215	 * so buffer diagnostic messages for later output.
1216	 */
1217	char *pdb_msg;
1218	char id_ho_db_msg[768]; /* worst-case use should be less than 700 */
1219
1220	if (atomic_read(&idle_hook_initialized) == 0) { /* fast test */
1221		if (atomic_add_return(1, &idle_hook_initialized) == 1) {
1222			int mvpconf0;
1223			/* Tedious stuff to just do once */
1224			mvpconf0 = read_c0_mvpconf0();
1225			hook_ntcs = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
1226			if (hook_ntcs > NR_CPUS)
1227				hook_ntcs = NR_CPUS;
1228			for (tc = 0; tc < hook_ntcs; tc++) {
1229				tcnoprog[tc] = 0;
1230				clock_hang_reported[tc] = 0;
1231	    		}
1232			for (vpe = 0; vpe < 2; vpe++)
1233				for (im = 0; im < 8; im++)
1234					imstuckcount[vpe][im] = 0;
1235			printk("Idle loop test hook initialized for %d TCs\n", hook_ntcs);
1236			atomic_set(&idle_hook_initialized, 1000);
1237		} else {
1238			/* Someone else is initializing in parallel - let 'em finish */
1239			while (atomic_read(&idle_hook_initialized) < 1000)
1240				;
1241		}
1242	}
1243
1244	/* Have we stupidly left IXMT set somewhere? */
1245	if (read_c0_tcstatus() & 0x400) {
1246		write_c0_tcstatus(read_c0_tcstatus() & ~0x400);
1247		ehb();
1248		printk("Dangling IXMT in cpu_idle()\n");
1249	}
1250
1251	/* Have we stupidly left an IM bit turned off? */
1252#define IM_LIMIT 2000
1253	local_irq_save(flags);
1254	mtflags = dmt();
1255	pdb_msg = &id_ho_db_msg[0];
1256	im = read_c0_status();
1257	vpe = current_cpu_data.vpe_id;
1258	for (bit = 0; bit < 8; bit++) {
1259		/*
1260		 * In current prototype, I/O interrupts
1261		 * are masked for VPE > 0
1262		 */
1263		if (vpemask[vpe][bit]) {
1264			if (!(im & (0x100 << bit)))
1265				imstuckcount[vpe][bit]++;
1266			else
1267				imstuckcount[vpe][bit] = 0;
1268			if (imstuckcount[vpe][bit] > IM_LIMIT) {
1269				set_c0_status(0x100 << bit);
1270				ehb();
1271				imstuckcount[vpe][bit] = 0;
1272				pdb_msg += sprintf(pdb_msg,
1273					"Dangling IM %d fixed for VPE %d\n", bit,
1274					vpe);
1275			}
1276		}
1277	}
1278
1279	emt(mtflags);
1280	local_irq_restore(flags);
1281	if (pdb_msg != &id_ho_db_msg[0])
1282		printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
1283#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
1284
1285	smtc_ipi_replay();
1286}
1287
1288void smtc_soft_dump(void)
1289{
1290	int i;
1291
1292	printk("Counter Interrupts taken per CPU (TC)\n");
1293	for (i=0; i < NR_CPUS; i++) {
1294		printk("%d: %ld\n", i, smtc_cpu_stats[i].timerints);
1295	}
1296	printk("Self-IPI invocations:\n");
1297	for (i=0; i < NR_CPUS; i++) {
1298		printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
1299	}
1300	smtc_ipi_qdump();
1301	printk("%d Recoveries of \"stolen\" FPU\n",
1302	       atomic_read(&smtc_fpu_recoveries));
1303}
1304
1305
1306/*
1307 * TLB management routines special to SMTC
1308 */
1309
1310void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
1311{
1312	unsigned long flags, mtflags, tcstat, prevhalt, asid;
1313	int tlb, i;
1314
1315	/*
1316	 * It would be nice to be able to use a spinlock here,
1317	 * but this is invoked from within TLB flush routines
1318	 * that protect themselves with DVPE, so if a lock is
1319	 * held by another TC, it'll never be freed.
1320	 *
1321	 * DVPE/DMT must not be done with interrupts enabled,
1322	 * so even so most callers will already have disabled
1323	 * them, let's be really careful...
1324	 */
1325
1326	local_irq_save(flags);
1327	if (smtc_status & SMTC_TLB_SHARED) {
1328		mtflags = dvpe();
1329		tlb = 0;
1330	} else {
1331		mtflags = dmt();
1332		tlb = cpu_data[cpu].vpe_id;
1333	}
1334	asid = asid_cache(cpu);
1335
1336	do {
1337		if (!((asid += ASID_INC) & ASID_MASK) ) {
1338			if (cpu_has_vtag_icache)
1339				flush_icache_all();
1340			/* Traverse all online CPUs (hack requires contiguous range) */
1341			for_each_online_cpu(i) {
1342				/*
1343				 * We don't need to worry about our own CPU, nor those of
1344				 * CPUs who don't share our TLB.
1345				 */
1346				if ((i != smp_processor_id()) &&
1347				    ((smtc_status & SMTC_TLB_SHARED) ||
1348				     (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))) {
1349					settc(cpu_data[i].tc_id);
1350					prevhalt = read_tc_c0_tchalt() & TCHALT_H;
1351					if (!prevhalt) {
1352						write_tc_c0_tchalt(TCHALT_H);
1353						mips_ihb();
1354					}
1355					tcstat = read_tc_c0_tcstatus();
1356					smtc_live_asid[tlb][(tcstat & ASID_MASK)] |= (asiduse)(0x1 << i);
1357					if (!prevhalt)
1358						write_tc_c0_tchalt(0);
1359				}
1360			}
1361			if (!asid)		/* fix version if needed */
1362				asid = ASID_FIRST_VERSION;
1363			local_flush_tlb_all();	/* start new asid cycle */
1364		}
1365	} while (smtc_live_asid[tlb][(asid & ASID_MASK)]);
1366
1367	/*
1368	 * SMTC shares the TLB within VPEs and possibly across all VPEs.
1369	 */
1370	for_each_online_cpu(i) {
1371		if ((smtc_status & SMTC_TLB_SHARED) ||
1372		    (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))
1373			cpu_context(i, mm) = asid_cache(i) = asid;
1374	}
1375
1376	if (smtc_status & SMTC_TLB_SHARED)
1377		evpe(mtflags);
1378	else
1379		emt(mtflags);
1380	local_irq_restore(flags);
1381}
1382
1383/*
1384 * Invoked from macros defined in mmu_context.h
1385 * which must already have disabled interrupts
1386 * and done a DVPE or DMT as appropriate.
1387 */
1388
1389void smtc_flush_tlb_asid(unsigned long asid)
1390{
1391	int entry;
1392	unsigned long ehi;
1393
1394	entry = read_c0_wired();
1395
1396	/* Traverse all non-wired entries */
1397	while (entry < current_cpu_data.tlbsize) {
1398		write_c0_index(entry);
1399		ehb();
1400		tlb_read();
1401		ehb();
1402		ehi = read_c0_entryhi();
1403		if ((ehi & ASID_MASK) == asid) {
1404		    /*
1405		     * Invalidate only entries with specified ASID,
1406		     * makiing sure all entries differ.
1407		     */
1408		    write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1)));
1409		    write_c0_entrylo0(0);
1410		    write_c0_entrylo1(0);
1411		    mtc0_tlbw_hazard();
1412		    tlb_write_indexed();
1413		}
1414		entry++;
1415	}
1416	write_c0_index(PARKED_INDEX);
1417	tlbw_use_hazard();
1418}
1419
1420/*
1421 * Support for single-threading cache flush operations.
1422 */
1423
1424static int halt_state_save[NR_CPUS];
1425
1426/*
1427 * To really, really be sure that nothing is being done
1428 * by other TCs, halt them all.  This code assumes that
1429 * a DVPE has already been done, so while their Halted
1430 * state is theoretically architecturally unstable, in
1431 * practice, it's not going to change while we're looking
1432 * at it.
1433 */
1434
1435void smtc_cflush_lockdown(void)
1436{
1437	int cpu;
1438
1439	for_each_online_cpu(cpu) {
1440		if (cpu != smp_processor_id()) {
1441			settc(cpu_data[cpu].tc_id);
1442			halt_state_save[cpu] = read_tc_c0_tchalt();
1443			write_tc_c0_tchalt(TCHALT_H);
1444		}
1445	}
1446	mips_ihb();
1447}
1448
1449/* It would be cheating to change the cpu_online states during a flush! */
1450
1451void smtc_cflush_release(void)
1452{
1453	int cpu;
1454
1455	/*
1456	 * Start with a hazard barrier to ensure
1457	 * that all CACHE ops have played through.
1458	 */
1459	mips_ihb();
1460
1461	for_each_online_cpu(cpu) {
1462		if (cpu != smp_processor_id()) {
1463			settc(cpu_data[cpu].tc_id);
1464			write_tc_c0_tchalt(halt_state_save[cpu]);
1465		}
1466	}
1467	mips_ihb();
1468}