Loading...
1/*
2 * net/tipc/bearer.h: Include file for TIPC bearer code
3 *
4 * Copyright (c) 1996-2006, Ericsson AB
5 * Copyright (c) 2005, 2010-2011, Wind River Systems
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
35 */
36
37#ifndef _TIPC_BEARER_H
38#define _TIPC_BEARER_H
39
40#include "bcast.h"
41
42#define MAX_BEARERS 2
43#define MAX_MEDIA 2
44
45/*
46 * Identifiers associated with TIPC message header media address info
47 *
48 * - address info field is 20 bytes long
49 * - media type identifier located at offset 3
50 * - remaining bytes vary according to media type
51 */
52#define TIPC_MEDIA_ADDR_SIZE 20
53#define TIPC_MEDIA_TYPE_OFFSET 3
54
55/*
56 * Identifiers of supported TIPC media types
57 */
58#define TIPC_MEDIA_TYPE_ETH 1
59
60/*
61 * struct tipc_media_addr - destination address used by TIPC bearers
62 * @value: address info (format defined by media)
63 * @media_id: TIPC media type identifier
64 * @broadcast: non-zero if address is a broadcast address
65 */
66struct tipc_media_addr {
67 u8 value[TIPC_MEDIA_ADDR_SIZE];
68 u8 media_id;
69 u8 broadcast;
70};
71
72struct tipc_bearer;
73
74/**
75 * struct tipc_media - TIPC media information available to internal users
76 * @send_msg: routine which handles buffer transmission
77 * @enable_bearer: routine which enables a bearer
78 * @disable_bearer: routine which disables a bearer
79 * @addr2str: routine which converts media address to string
80 * @str2addr: routine which converts media address from string
81 * @addr2msg: routine which converts media address to protocol message area
82 * @msg2addr: routine which converts media address from protocol message area
83 * @bcast_addr: media address used in broadcasting
84 * @priority: default link (and bearer) priority
85 * @tolerance: default time (in ms) before declaring link failure
86 * @window: default window (in packets) before declaring link congestion
87 * @type_id: TIPC media identifier
88 * @name: media name
89 */
90struct tipc_media {
91 int (*send_msg)(struct sk_buff *buf,
92 struct tipc_bearer *b_ptr,
93 struct tipc_media_addr *dest);
94 int (*enable_bearer)(struct tipc_bearer *b_ptr);
95 void (*disable_bearer)(struct tipc_bearer *b_ptr);
96 int (*addr2str)(struct tipc_media_addr *a, char *str_buf, int str_size);
97 int (*str2addr)(struct tipc_media_addr *a, char *str_buf);
98 int (*addr2msg)(struct tipc_media_addr *a, char *msg_area);
99 int (*msg2addr)(struct tipc_media_addr *a, char *msg_area);
100 struct tipc_media_addr bcast_addr;
101 u32 priority;
102 u32 tolerance;
103 u32 window;
104 u32 type_id;
105 char name[TIPC_MAX_MEDIA_NAME];
106};
107
108/**
109 * struct tipc_bearer - TIPC bearer structure
110 * @usr_handle: pointer to additional media-specific information about bearer
111 * @mtu: max packet size bearer can support
112 * @blocked: non-zero if bearer is blocked
113 * @lock: spinlock for controlling access to bearer
114 * @addr: media-specific address associated with bearer
115 * @name: bearer name (format = media:interface)
116 * @media: ptr to media structure associated with bearer
117 * @priority: default link priority for bearer
118 * @window: default window size for bearer
119 * @tolerance: default link tolerance for bearer
120 * @identity: array index of this bearer within TIPC bearer array
121 * @link_req: ptr to (optional) structure making periodic link setup requests
122 * @links: list of non-congested links associated with bearer
123 * @cong_links: list of congested links associated with bearer
124 * @active: non-zero if bearer structure is represents a bearer
125 * @net_plane: network plane ('A' through 'H') currently associated with bearer
126 * @nodes: indicates which nodes in cluster can be reached through bearer
127 *
128 * Note: media-specific code is responsible for initialization of the fields
129 * indicated below when a bearer is enabled; TIPC's generic bearer code takes
130 * care of initializing all other fields.
131 */
132struct tipc_bearer {
133 void *usr_handle; /* initalized by media */
134 u32 mtu; /* initalized by media */
135 int blocked; /* initalized by media */
136 struct tipc_media_addr addr; /* initalized by media */
137 char name[TIPC_MAX_BEARER_NAME];
138 spinlock_t lock;
139 struct tipc_media *media;
140 u32 priority;
141 u32 window;
142 u32 tolerance;
143 u32 identity;
144 struct tipc_link_req *link_req;
145 struct list_head links;
146 struct list_head cong_links;
147 int active;
148 char net_plane;
149 struct tipc_node_map nodes;
150};
151
152struct tipc_bearer_names {
153 char media_name[TIPC_MAX_MEDIA_NAME];
154 char if_name[TIPC_MAX_IF_NAME];
155};
156
157struct tipc_link;
158
159extern struct tipc_bearer tipc_bearers[];
160
161/*
162 * TIPC routines available to supported media types
163 */
164int tipc_register_media(struct tipc_media *m_ptr);
165
166void tipc_recv_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr);
167
168int tipc_block_bearer(const char *name);
169void tipc_continue(struct tipc_bearer *tb_ptr);
170
171int tipc_enable_bearer(const char *bearer_name, u32 disc_domain, u32 priority);
172int tipc_disable_bearer(const char *name);
173
174/*
175 * Routines made available to TIPC by supported media types
176 */
177int tipc_eth_media_start(void);
178void tipc_eth_media_stop(void);
179
180int tipc_media_set_priority(const char *name, u32 new_value);
181int tipc_media_set_window(const char *name, u32 new_value);
182void tipc_media_addr_printf(struct print_buf *pb, struct tipc_media_addr *a);
183struct sk_buff *tipc_media_get_names(void);
184
185struct sk_buff *tipc_bearer_get_names(void);
186void tipc_bearer_add_dest(struct tipc_bearer *b_ptr, u32 dest);
187void tipc_bearer_remove_dest(struct tipc_bearer *b_ptr, u32 dest);
188void tipc_bearer_schedule(struct tipc_bearer *b_ptr, struct tipc_link *l_ptr);
189struct tipc_bearer *tipc_bearer_find(const char *name);
190struct tipc_bearer *tipc_bearer_find_interface(const char *if_name);
191struct tipc_media *tipc_media_find(const char *name);
192int tipc_bearer_resolve_congestion(struct tipc_bearer *b_ptr,
193 struct tipc_link *l_ptr);
194int tipc_bearer_congested(struct tipc_bearer *b_ptr, struct tipc_link *l_ptr);
195void tipc_bearer_stop(void);
196void tipc_bearer_lock_push(struct tipc_bearer *b_ptr);
197
198
199/**
200 * tipc_bearer_send- sends buffer to destination over bearer
201 *
202 * Returns true (1) if successful, or false (0) if unable to send
203 *
204 * IMPORTANT:
205 * The media send routine must not alter the buffer being passed in
206 * as it may be needed for later retransmission!
207 *
208 * If the media send routine returns a non-zero value (indicating that
209 * it was unable to send the buffer), it must:
210 * 1) mark the bearer as blocked,
211 * 2) call tipc_continue() once the bearer is able to send again.
212 * Media types that are unable to meet these two critera must ensure their
213 * send routine always returns success -- even if the buffer was not sent --
214 * and let TIPC's link code deal with the undelivered message.
215 */
216static inline int tipc_bearer_send(struct tipc_bearer *b_ptr,
217 struct sk_buff *buf,
218 struct tipc_media_addr *dest)
219{
220 return !b_ptr->media->send_msg(buf, b_ptr, dest);
221}
222
223#endif /* _TIPC_BEARER_H */
1/*
2 * net/tipc/bearer.h: Include file for TIPC bearer code
3 *
4 * Copyright (c) 1996-2006, Ericsson AB
5 * Copyright (c) 2005, 2010-2011, Wind River Systems
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
35 */
36
37#ifndef _TIPC_BEARER_H
38#define _TIPC_BEARER_H
39
40#include "bcast.h"
41
42#define MAX_BEARERS 8
43#define MAX_MEDIA 4
44
45/*
46 * Identifiers of supported TIPC media types
47 */
48#define TIPC_MEDIA_TYPE_ETH 1
49
50/*
51 * Destination address structure used by TIPC bearers when sending messages
52 *
53 * IMPORTANT: The fields of this structure MUST be stored using the specified
54 * byte order indicated below, as the structure is exchanged between nodes
55 * as part of a link setup process.
56 */
57struct tipc_media_addr {
58 __be32 type; /* bearer type (network byte order) */
59 union {
60 __u8 eth_addr[6]; /* 48 bit Ethernet addr (byte array) */
61 } dev_addr;
62};
63
64struct tipc_bearer;
65
66/**
67 * struct media - TIPC media information available to internal users
68 * @send_msg: routine which handles buffer transmission
69 * @enable_bearer: routine which enables a bearer
70 * @disable_bearer: routine which disables a bearer
71 * @addr2str: routine which converts bearer's address to string form
72 * @bcast_addr: media address used in broadcasting
73 * @priority: default link (and bearer) priority
74 * @tolerance: default time (in ms) before declaring link failure
75 * @window: default window (in packets) before declaring link congestion
76 * @type_id: TIPC media identifier
77 * @name: media name
78 */
79
80struct media {
81 int (*send_msg)(struct sk_buff *buf,
82 struct tipc_bearer *b_ptr,
83 struct tipc_media_addr *dest);
84 int (*enable_bearer)(struct tipc_bearer *b_ptr);
85 void (*disable_bearer)(struct tipc_bearer *b_ptr);
86 char *(*addr2str)(struct tipc_media_addr *a,
87 char *str_buf, int str_size);
88 struct tipc_media_addr bcast_addr;
89 u32 priority;
90 u32 tolerance;
91 u32 window;
92 u32 type_id;
93 char name[TIPC_MAX_MEDIA_NAME];
94};
95
96/**
97 * struct tipc_bearer - TIPC bearer structure
98 * @usr_handle: pointer to additional media-specific information about bearer
99 * @mtu: max packet size bearer can support
100 * @blocked: non-zero if bearer is blocked
101 * @lock: spinlock for controlling access to bearer
102 * @addr: media-specific address associated with bearer
103 * @name: bearer name (format = media:interface)
104 * @media: ptr to media structure associated with bearer
105 * @priority: default link priority for bearer
106 * @identity: array index of this bearer within TIPC bearer array
107 * @link_req: ptr to (optional) structure making periodic link setup requests
108 * @links: list of non-congested links associated with bearer
109 * @cong_links: list of congested links associated with bearer
110 * @active: non-zero if bearer structure is represents a bearer
111 * @net_plane: network plane ('A' through 'H') currently associated with bearer
112 * @nodes: indicates which nodes in cluster can be reached through bearer
113 *
114 * Note: media-specific code is responsible for initialization of the fields
115 * indicated below when a bearer is enabled; TIPC's generic bearer code takes
116 * care of initializing all other fields.
117 */
118struct tipc_bearer {
119 void *usr_handle; /* initalized by media */
120 u32 mtu; /* initalized by media */
121 int blocked; /* initalized by media */
122 struct tipc_media_addr addr; /* initalized by media */
123 char name[TIPC_MAX_BEARER_NAME];
124 spinlock_t lock;
125 struct media *media;
126 u32 priority;
127 u32 identity;
128 struct link_req *link_req;
129 struct list_head links;
130 struct list_head cong_links;
131 int active;
132 char net_plane;
133 struct tipc_node_map nodes;
134};
135
136struct bearer_name {
137 char media_name[TIPC_MAX_MEDIA_NAME];
138 char if_name[TIPC_MAX_IF_NAME];
139};
140
141struct link;
142
143extern struct tipc_bearer tipc_bearers[];
144
145/*
146 * TIPC routines available to supported media types
147 */
148int tipc_register_media(u32 media_type,
149 char *media_name, int (*enable)(struct tipc_bearer *),
150 void (*disable)(struct tipc_bearer *),
151 int (*send_msg)(struct sk_buff *,
152 struct tipc_bearer *, struct tipc_media_addr *),
153 char *(*addr2str)(struct tipc_media_addr *a,
154 char *str_buf, int str_size),
155 struct tipc_media_addr *bcast_addr, const u32 bearer_priority,
156 const u32 link_tolerance, /* [ms] */
157 const u32 send_window_limit);
158
159void tipc_recv_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr);
160
161int tipc_block_bearer(const char *name);
162void tipc_continue(struct tipc_bearer *tb_ptr);
163
164int tipc_enable_bearer(const char *bearer_name, u32 disc_domain, u32 priority);
165int tipc_disable_bearer(const char *name);
166
167/*
168 * Routines made available to TIPC by supported media types
169 */
170int tipc_eth_media_start(void);
171void tipc_eth_media_stop(void);
172
173void tipc_media_addr_printf(struct print_buf *pb, struct tipc_media_addr *a);
174struct sk_buff *tipc_media_get_names(void);
175
176struct sk_buff *tipc_bearer_get_names(void);
177void tipc_bearer_add_dest(struct tipc_bearer *b_ptr, u32 dest);
178void tipc_bearer_remove_dest(struct tipc_bearer *b_ptr, u32 dest);
179void tipc_bearer_schedule(struct tipc_bearer *b_ptr, struct link *l_ptr);
180struct tipc_bearer *tipc_bearer_find_interface(const char *if_name);
181int tipc_bearer_resolve_congestion(struct tipc_bearer *b_ptr, struct link *l_ptr);
182int tipc_bearer_congested(struct tipc_bearer *b_ptr, struct link *l_ptr);
183void tipc_bearer_stop(void);
184void tipc_bearer_lock_push(struct tipc_bearer *b_ptr);
185
186
187/**
188 * tipc_bearer_send- sends buffer to destination over bearer
189 *
190 * Returns true (1) if successful, or false (0) if unable to send
191 *
192 * IMPORTANT:
193 * The media send routine must not alter the buffer being passed in
194 * as it may be needed for later retransmission!
195 *
196 * If the media send routine returns a non-zero value (indicating that
197 * it was unable to send the buffer), it must:
198 * 1) mark the bearer as blocked,
199 * 2) call tipc_continue() once the bearer is able to send again.
200 * Media types that are unable to meet these two critera must ensure their
201 * send routine always returns success -- even if the buffer was not sent --
202 * and let TIPC's link code deal with the undelivered message.
203 */
204
205static inline int tipc_bearer_send(struct tipc_bearer *b_ptr,
206 struct sk_buff *buf,
207 struct tipc_media_addr *dest)
208{
209 return !b_ptr->media->send_msg(buf, b_ptr, dest);
210}
211
212#endif /* _TIPC_BEARER_H */