Linux Audio

Check our new training course

Loading...
v3.5.6
  1/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
  2 *
  3 * This program is free software; you can redistribute it and/or modify
  4 * it under the terms of the GNU General Public License version 2 and
  5 * only version 2 as published by the Free Software Foundation.
  6 *
  7 * This program is distributed in the hope that it will be useful,
  8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 10 * GNU General Public License for more details.
 11 */
 12
 13#include <linux/module.h>
 14#include <linux/init.h>
 15#include <linux/rtc.h>
 16#include <linux/pm.h>
 17#include <linux/slab.h>
 18#include <linux/spinlock.h>
 19
 20#include <linux/mfd/pm8xxx/core.h>
 21#include <linux/mfd/pm8xxx/rtc.h>
 22
 23
 24/* RTC Register offsets from RTC CTRL REG */
 25#define PM8XXX_ALARM_CTRL_OFFSET	0x01
 26#define PM8XXX_RTC_WRITE_OFFSET		0x02
 27#define PM8XXX_RTC_READ_OFFSET		0x06
 28#define PM8XXX_ALARM_RW_OFFSET		0x0A
 29
 30/* RTC_CTRL register bit fields */
 31#define PM8xxx_RTC_ENABLE		BIT(7)
 32#define PM8xxx_RTC_ALARM_ENABLE		BIT(1)
 33#define PM8xxx_RTC_ALARM_CLEAR		BIT(0)
 34
 35#define NUM_8_BIT_RTC_REGS		0x4
 36
 37/**
 38 * struct pm8xxx_rtc -  rtc driver internal structure
 39 * @rtc:		rtc device for this driver.
 40 * @rtc_alarm_irq:	rtc alarm irq number.
 41 * @rtc_base:		address of rtc control register.
 42 * @rtc_read_base:	base address of read registers.
 43 * @rtc_write_base:	base address of write registers.
 44 * @alarm_rw_base:	base address of alarm registers.
 45 * @ctrl_reg:		rtc control register.
 46 * @rtc_dev:		device structure.
 47 * @ctrl_reg_lock:	spinlock protecting access to ctrl_reg.
 48 */
 49struct pm8xxx_rtc {
 50	struct rtc_device *rtc;
 51	int rtc_alarm_irq;
 52	int rtc_base;
 53	int rtc_read_base;
 54	int rtc_write_base;
 55	int alarm_rw_base;
 56	u8  ctrl_reg;
 57	struct device *rtc_dev;
 58	spinlock_t ctrl_reg_lock;
 59};
 60
 61/*
 62 * The RTC registers need to be read/written one byte at a time. This is a
 63 * hardware limitation.
 64 */
 65static int pm8xxx_read_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
 66		int base, int count)
 67{
 68	int i, rc;
 69	struct device *parent = rtc_dd->rtc_dev->parent;
 70
 71	for (i = 0; i < count; i++) {
 72		rc = pm8xxx_readb(parent, base + i, &rtc_val[i]);
 73		if (rc < 0) {
 74			dev_err(rtc_dd->rtc_dev, "PMIC read failed\n");
 75			return rc;
 76		}
 77	}
 78
 79	return 0;
 80}
 81
 82static int pm8xxx_write_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
 83		int base, int count)
 84{
 85	int i, rc;
 86	struct device *parent = rtc_dd->rtc_dev->parent;
 87
 88	for (i = 0; i < count; i++) {
 89		rc = pm8xxx_writeb(parent, base + i, rtc_val[i]);
 90		if (rc < 0) {
 91			dev_err(rtc_dd->rtc_dev, "PMIC write failed\n");
 92			return rc;
 93		}
 94	}
 95
 96	return 0;
 97}
 98
 99/*
100 * Steps to write the RTC registers.
101 * 1. Disable alarm if enabled.
102 * 2. Write 0x00 to LSB.
103 * 3. Write Byte[1], Byte[2], Byte[3] then Byte[0].
104 * 4. Enable alarm if disabled in step 1.
105 */
106static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
107{
108	int rc, i;
109	unsigned long secs, irq_flags;
110	u8 value[NUM_8_BIT_RTC_REGS], reg = 0, alarm_enabled = 0, ctrl_reg;
111	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
112
113	rtc_tm_to_time(tm, &secs);
114
115	for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
116		value[i] = secs & 0xFF;
117		secs >>= 8;
118	}
119
120	dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
121
122	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
123	ctrl_reg = rtc_dd->ctrl_reg;
124
125	if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) {
126		alarm_enabled = 1;
127		ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
128		rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
129				1);
130		if (rc < 0) {
131			dev_err(dev, "Write to RTC control register "
132								"failed\n");
133			goto rtc_rw_fail;
134		}
135		rtc_dd->ctrl_reg = ctrl_reg;
136	} else
137		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
138
139	/* Write 0 to Byte[0] */
140	reg = 0;
141	rc = pm8xxx_write_wrapper(rtc_dd, &reg, rtc_dd->rtc_write_base, 1);
142	if (rc < 0) {
143		dev_err(dev, "Write to RTC write data register failed\n");
144		goto rtc_rw_fail;
145	}
146
147	/* Write Byte[1], Byte[2], Byte[3] */
148	rc = pm8xxx_write_wrapper(rtc_dd, value + 1,
149					rtc_dd->rtc_write_base + 1, 3);
150	if (rc < 0) {
151		dev_err(dev, "Write to RTC write data register failed\n");
152		goto rtc_rw_fail;
153	}
154
155	/* Write Byte[0] */
156	rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->rtc_write_base, 1);
157	if (rc < 0) {
158		dev_err(dev, "Write to RTC write data register failed\n");
159		goto rtc_rw_fail;
160	}
161
162	if (alarm_enabled) {
163		ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
164		rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
165									1);
166		if (rc < 0) {
167			dev_err(dev, "Write to RTC control register "
168								"failed\n");
169			goto rtc_rw_fail;
170		}
171		rtc_dd->ctrl_reg = ctrl_reg;
172	}
173
174rtc_rw_fail:
175	if (alarm_enabled)
176		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
177
178	return rc;
179}
180
181static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
182{
183	int rc;
184	u8 value[NUM_8_BIT_RTC_REGS], reg;
185	unsigned long secs;
186	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
187
188	rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->rtc_read_base,
189							NUM_8_BIT_RTC_REGS);
190	if (rc < 0) {
191		dev_err(dev, "RTC read data register failed\n");
192		return rc;
193	}
194
195	/*
196	 * Read the LSB again and check if there has been a carry over.
197	 * If there is, redo the read operation.
198	 */
199	rc = pm8xxx_read_wrapper(rtc_dd, &reg, rtc_dd->rtc_read_base, 1);
200	if (rc < 0) {
201		dev_err(dev, "RTC read data register failed\n");
202		return rc;
203	}
204
205	if (unlikely(reg < value[0])) {
206		rc = pm8xxx_read_wrapper(rtc_dd, value,
207				rtc_dd->rtc_read_base, NUM_8_BIT_RTC_REGS);
208		if (rc < 0) {
209			dev_err(dev, "RTC read data register failed\n");
210			return rc;
211		}
212	}
213
214	secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
215
216	rtc_time_to_tm(secs, tm);
217
218	rc = rtc_valid_tm(tm);
219	if (rc < 0) {
220		dev_err(dev, "Invalid time read from RTC\n");
221		return rc;
222	}
223
224	dev_dbg(dev, "secs = %lu, h:m:s == %d:%d:%d, d/m/y = %d/%d/%d\n",
225				secs, tm->tm_hour, tm->tm_min, tm->tm_sec,
226				tm->tm_mday, tm->tm_mon, tm->tm_year);
227
228	return 0;
229}
230
231static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
232{
233	int rc, i;
234	u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg;
235	unsigned long secs, irq_flags;
236	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
237
238	rtc_tm_to_time(&alarm->time, &secs);
239
240	for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
241		value[i] = secs & 0xFF;
242		secs >>= 8;
243	}
244
245	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
246
247	rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
248							NUM_8_BIT_RTC_REGS);
249	if (rc < 0) {
250		dev_err(dev, "Write to RTC ALARM register failed\n");
251		goto rtc_rw_fail;
252	}
253
254	ctrl_reg = rtc_dd->ctrl_reg;
255	ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
256					(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
257
258	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
259	if (rc < 0) {
260		dev_err(dev, "Write to RTC control register failed\n");
261		goto rtc_rw_fail;
262	}
263
264	rtc_dd->ctrl_reg = ctrl_reg;
265
266	dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
267				alarm->time.tm_hour, alarm->time.tm_min,
268				alarm->time.tm_sec, alarm->time.tm_mday,
269				alarm->time.tm_mon, alarm->time.tm_year);
270rtc_rw_fail:
271	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
272	return rc;
273}
274
275static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
276{
277	int rc;
278	u8 value[NUM_8_BIT_RTC_REGS];
279	unsigned long secs;
280	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
281
282	rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
283			NUM_8_BIT_RTC_REGS);
284	if (rc < 0) {
285		dev_err(dev, "RTC alarm time read failed\n");
286		return rc;
287	}
288
289	secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
290
291	rtc_time_to_tm(secs, &alarm->time);
292
293	rc = rtc_valid_tm(&alarm->time);
294	if (rc < 0) {
295		dev_err(dev, "Invalid alarm time read from RTC\n");
296		return rc;
297	}
298
299	dev_dbg(dev, "Alarm set for - h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
300				alarm->time.tm_hour, alarm->time.tm_min,
301				alarm->time.tm_sec, alarm->time.tm_mday,
302				alarm->time.tm_mon, alarm->time.tm_year);
303
304	return 0;
305}
306
307static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
308{
309	int rc;
310	unsigned long irq_flags;
311	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
312	u8 ctrl_reg;
313
314	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
315	ctrl_reg = rtc_dd->ctrl_reg;
316	ctrl_reg = (enable) ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
317				(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
318
319	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
320	if (rc < 0) {
321		dev_err(dev, "Write to RTC control register failed\n");
322		goto rtc_rw_fail;
323	}
324
325	rtc_dd->ctrl_reg = ctrl_reg;
326
327rtc_rw_fail:
328	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
329	return rc;
330}
331
332static struct rtc_class_ops pm8xxx_rtc_ops = {
333	.read_time	= pm8xxx_rtc_read_time,
334	.set_alarm	= pm8xxx_rtc_set_alarm,
335	.read_alarm	= pm8xxx_rtc_read_alarm,
336	.alarm_irq_enable = pm8xxx_rtc_alarm_irq_enable,
337};
338
339static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
340{
341	struct pm8xxx_rtc *rtc_dd = dev_id;
342	u8 ctrl_reg;
343	int rc;
344	unsigned long irq_flags;
345
346	rtc_update_irq(rtc_dd->rtc, 1, RTC_IRQF | RTC_AF);
347
348	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
349
350	/* Clear the alarm enable bit */
351	ctrl_reg = rtc_dd->ctrl_reg;
352	ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
353
354	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
355	if (rc < 0) {
356		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
357		dev_err(rtc_dd->rtc_dev, "Write to RTC control register "
358								"failed\n");
359		goto rtc_alarm_handled;
360	}
361
362	rtc_dd->ctrl_reg = ctrl_reg;
363	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
364
365	/* Clear RTC alarm register */
366	rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
367						PM8XXX_ALARM_CTRL_OFFSET, 1);
368	if (rc < 0) {
369		dev_err(rtc_dd->rtc_dev, "RTC Alarm control register read "
370								"failed\n");
371		goto rtc_alarm_handled;
372	}
373
374	ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR;
375	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
376						PM8XXX_ALARM_CTRL_OFFSET, 1);
377	if (rc < 0)
378		dev_err(rtc_dd->rtc_dev, "Write to RTC Alarm control register"
379								" failed\n");
380
381rtc_alarm_handled:
382	return IRQ_HANDLED;
383}
384
385static int __devinit pm8xxx_rtc_probe(struct platform_device *pdev)
386{
387	int rc;
388	u8 ctrl_reg;
389	bool rtc_write_enable = false;
390	struct pm8xxx_rtc *rtc_dd;
391	struct resource *rtc_resource;
392	const struct pm8xxx_rtc_platform_data *pdata =
393						dev_get_platdata(&pdev->dev);
394
395	if (pdata != NULL)
396		rtc_write_enable = pdata->rtc_write_enable;
397
398	rtc_dd = kzalloc(sizeof(*rtc_dd), GFP_KERNEL);
399	if (rtc_dd == NULL) {
400		dev_err(&pdev->dev, "Unable to allocate memory!\n");
401		return -ENOMEM;
402	}
403
404	/* Initialise spinlock to protect RTC control register */
405	spin_lock_init(&rtc_dd->ctrl_reg_lock);
406
407	rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0);
408	if (rtc_dd->rtc_alarm_irq < 0) {
409		dev_err(&pdev->dev, "Alarm IRQ resource absent!\n");
410		rc = -ENXIO;
411		goto fail_rtc_enable;
412	}
413
414	rtc_resource = platform_get_resource_byname(pdev, IORESOURCE_IO,
415							"pmic_rtc_base");
416	if (!(rtc_resource && rtc_resource->start)) {
417		dev_err(&pdev->dev, "RTC IO resource absent!\n");
418		rc = -ENXIO;
419		goto fail_rtc_enable;
420	}
421
422	rtc_dd->rtc_base = rtc_resource->start;
423
424	/* Setup RTC register addresses */
425	rtc_dd->rtc_write_base = rtc_dd->rtc_base + PM8XXX_RTC_WRITE_OFFSET;
426	rtc_dd->rtc_read_base = rtc_dd->rtc_base + PM8XXX_RTC_READ_OFFSET;
427	rtc_dd->alarm_rw_base = rtc_dd->rtc_base + PM8XXX_ALARM_RW_OFFSET;
428
429	rtc_dd->rtc_dev = &pdev->dev;
430
431	/* Check if the RTC is on, else turn it on */
432	rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
433	if (rc < 0) {
434		dev_err(&pdev->dev, "RTC control register read failed!\n");
435		goto fail_rtc_enable;
436	}
437
438	if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
439		ctrl_reg |= PM8xxx_RTC_ENABLE;
440		rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
441									1);
442		if (rc < 0) {
443			dev_err(&pdev->dev, "Write to RTC control register "
444								"failed\n");
445			goto fail_rtc_enable;
446		}
447	}
448
449	rtc_dd->ctrl_reg = ctrl_reg;
450	if (rtc_write_enable == true)
451		pm8xxx_rtc_ops.set_time = pm8xxx_rtc_set_time;
452
453	platform_set_drvdata(pdev, rtc_dd);
454
455	/* Register the RTC device */
456	rtc_dd->rtc = rtc_device_register("pm8xxx_rtc", &pdev->dev,
457				&pm8xxx_rtc_ops, THIS_MODULE);
458	if (IS_ERR(rtc_dd->rtc)) {
459		dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n",
460					__func__, PTR_ERR(rtc_dd->rtc));
461		rc = PTR_ERR(rtc_dd->rtc);
462		goto fail_rtc_enable;
463	}
464
465	/* Request the alarm IRQ */
466	rc = request_any_context_irq(rtc_dd->rtc_alarm_irq,
467				 pm8xxx_alarm_trigger, IRQF_TRIGGER_RISING,
468				 "pm8xxx_rtc_alarm", rtc_dd);
469	if (rc < 0) {
470		dev_err(&pdev->dev, "Request IRQ failed (%d)\n", rc);
471		goto fail_req_irq;
472	}
473
474	device_init_wakeup(&pdev->dev, 1);
475
476	dev_dbg(&pdev->dev, "Probe success !!\n");
477
478	return 0;
479
480fail_req_irq:
481	rtc_device_unregister(rtc_dd->rtc);
482fail_rtc_enable:
483	platform_set_drvdata(pdev, NULL);
484	kfree(rtc_dd);
485	return rc;
486}
487
488static int __devexit pm8xxx_rtc_remove(struct platform_device *pdev)
489{
490	struct pm8xxx_rtc *rtc_dd = platform_get_drvdata(pdev);
491
492	device_init_wakeup(&pdev->dev, 0);
493	free_irq(rtc_dd->rtc_alarm_irq, rtc_dd);
494	rtc_device_unregister(rtc_dd->rtc);
495	platform_set_drvdata(pdev, NULL);
496	kfree(rtc_dd);
497
498	return 0;
499}
500
501#ifdef CONFIG_PM_SLEEP
502static int pm8xxx_rtc_resume(struct device *dev)
503{
504	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
505
506	if (device_may_wakeup(dev))
507		disable_irq_wake(rtc_dd->rtc_alarm_irq);
508
509	return 0;
510}
511
512static int pm8xxx_rtc_suspend(struct device *dev)
513{
514	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
515
516	if (device_may_wakeup(dev))
517		enable_irq_wake(rtc_dd->rtc_alarm_irq);
518
519	return 0;
520}
521#endif
522
523static SIMPLE_DEV_PM_OPS(pm8xxx_rtc_pm_ops, pm8xxx_rtc_suspend, pm8xxx_rtc_resume);
524
525static struct platform_driver pm8xxx_rtc_driver = {
526	.probe		= pm8xxx_rtc_probe,
527	.remove		= __devexit_p(pm8xxx_rtc_remove),
528	.driver	= {
529		.name	= PM8XXX_RTC_DEV_NAME,
530		.owner	= THIS_MODULE,
531		.pm	= &pm8xxx_rtc_pm_ops,
532	},
533};
534
535module_platform_driver(pm8xxx_rtc_driver);
 
 
 
 
 
 
 
 
 
 
536
537MODULE_ALIAS("platform:rtc-pm8xxx");
538MODULE_DESCRIPTION("PMIC8xxx RTC driver");
539MODULE_LICENSE("GPL v2");
540MODULE_AUTHOR("Anirudh Ghayal <aghayal@codeaurora.org>");
v3.1
  1/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
  2 *
  3 * This program is free software; you can redistribute it and/or modify
  4 * it under the terms of the GNU General Public License version 2 and
  5 * only version 2 as published by the Free Software Foundation.
  6 *
  7 * This program is distributed in the hope that it will be useful,
  8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 10 * GNU General Public License for more details.
 11 */
 12
 13#include <linux/module.h>
 14#include <linux/init.h>
 15#include <linux/rtc.h>
 16#include <linux/pm.h>
 17#include <linux/slab.h>
 18#include <linux/spinlock.h>
 19
 20#include <linux/mfd/pm8xxx/core.h>
 21#include <linux/mfd/pm8xxx/rtc.h>
 22
 23
 24/* RTC Register offsets from RTC CTRL REG */
 25#define PM8XXX_ALARM_CTRL_OFFSET	0x01
 26#define PM8XXX_RTC_WRITE_OFFSET		0x02
 27#define PM8XXX_RTC_READ_OFFSET		0x06
 28#define PM8XXX_ALARM_RW_OFFSET		0x0A
 29
 30/* RTC_CTRL register bit fields */
 31#define PM8xxx_RTC_ENABLE		BIT(7)
 32#define PM8xxx_RTC_ALARM_ENABLE		BIT(1)
 33#define PM8xxx_RTC_ALARM_CLEAR		BIT(0)
 34
 35#define NUM_8_BIT_RTC_REGS		0x4
 36
 37/**
 38 * struct pm8xxx_rtc -  rtc driver internal structure
 39 * @rtc:		rtc device for this driver.
 40 * @rtc_alarm_irq:	rtc alarm irq number.
 41 * @rtc_base:		address of rtc control register.
 42 * @rtc_read_base:	base address of read registers.
 43 * @rtc_write_base:	base address of write registers.
 44 * @alarm_rw_base:	base address of alarm registers.
 45 * @ctrl_reg:		rtc control register.
 46 * @rtc_dev:		device structure.
 47 * @ctrl_reg_lock:	spinlock protecting access to ctrl_reg.
 48 */
 49struct pm8xxx_rtc {
 50	struct rtc_device *rtc;
 51	int rtc_alarm_irq;
 52	int rtc_base;
 53	int rtc_read_base;
 54	int rtc_write_base;
 55	int alarm_rw_base;
 56	u8  ctrl_reg;
 57	struct device *rtc_dev;
 58	spinlock_t ctrl_reg_lock;
 59};
 60
 61/*
 62 * The RTC registers need to be read/written one byte at a time. This is a
 63 * hardware limitation.
 64 */
 65static int pm8xxx_read_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
 66		int base, int count)
 67{
 68	int i, rc;
 69	struct device *parent = rtc_dd->rtc_dev->parent;
 70
 71	for (i = 0; i < count; i++) {
 72		rc = pm8xxx_readb(parent, base + i, &rtc_val[i]);
 73		if (rc < 0) {
 74			dev_err(rtc_dd->rtc_dev, "PMIC read failed\n");
 75			return rc;
 76		}
 77	}
 78
 79	return 0;
 80}
 81
 82static int pm8xxx_write_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
 83		int base, int count)
 84{
 85	int i, rc;
 86	struct device *parent = rtc_dd->rtc_dev->parent;
 87
 88	for (i = 0; i < count; i++) {
 89		rc = pm8xxx_writeb(parent, base + i, rtc_val[i]);
 90		if (rc < 0) {
 91			dev_err(rtc_dd->rtc_dev, "PMIC write failed\n");
 92			return rc;
 93		}
 94	}
 95
 96	return 0;
 97}
 98
 99/*
100 * Steps to write the RTC registers.
101 * 1. Disable alarm if enabled.
102 * 2. Write 0x00 to LSB.
103 * 3. Write Byte[1], Byte[2], Byte[3] then Byte[0].
104 * 4. Enable alarm if disabled in step 1.
105 */
106static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
107{
108	int rc, i;
109	unsigned long secs, irq_flags;
110	u8 value[NUM_8_BIT_RTC_REGS], reg = 0, alarm_enabled = 0, ctrl_reg;
111	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
112
113	rtc_tm_to_time(tm, &secs);
114
115	for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
116		value[i] = secs & 0xFF;
117		secs >>= 8;
118	}
119
120	dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
121
122	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
123	ctrl_reg = rtc_dd->ctrl_reg;
124
125	if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) {
126		alarm_enabled = 1;
127		ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
128		rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
129				1);
130		if (rc < 0) {
131			dev_err(dev, "Write to RTC control register "
132								"failed\n");
133			goto rtc_rw_fail;
134		}
135		rtc_dd->ctrl_reg = ctrl_reg;
136	} else
137		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
138
139	/* Write 0 to Byte[0] */
140	reg = 0;
141	rc = pm8xxx_write_wrapper(rtc_dd, &reg, rtc_dd->rtc_write_base, 1);
142	if (rc < 0) {
143		dev_err(dev, "Write to RTC write data register failed\n");
144		goto rtc_rw_fail;
145	}
146
147	/* Write Byte[1], Byte[2], Byte[3] */
148	rc = pm8xxx_write_wrapper(rtc_dd, value + 1,
149					rtc_dd->rtc_write_base + 1, 3);
150	if (rc < 0) {
151		dev_err(dev, "Write to RTC write data register failed\n");
152		goto rtc_rw_fail;
153	}
154
155	/* Write Byte[0] */
156	rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->rtc_write_base, 1);
157	if (rc < 0) {
158		dev_err(dev, "Write to RTC write data register failed\n");
159		goto rtc_rw_fail;
160	}
161
162	if (alarm_enabled) {
163		ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
164		rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
165									1);
166		if (rc < 0) {
167			dev_err(dev, "Write to RTC control register "
168								"failed\n");
169			goto rtc_rw_fail;
170		}
171		rtc_dd->ctrl_reg = ctrl_reg;
172	}
173
174rtc_rw_fail:
175	if (alarm_enabled)
176		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
177
178	return rc;
179}
180
181static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
182{
183	int rc;
184	u8 value[NUM_8_BIT_RTC_REGS], reg;
185	unsigned long secs;
186	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
187
188	rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->rtc_read_base,
189							NUM_8_BIT_RTC_REGS);
190	if (rc < 0) {
191		dev_err(dev, "RTC read data register failed\n");
192		return rc;
193	}
194
195	/*
196	 * Read the LSB again and check if there has been a carry over.
197	 * If there is, redo the read operation.
198	 */
199	rc = pm8xxx_read_wrapper(rtc_dd, &reg, rtc_dd->rtc_read_base, 1);
200	if (rc < 0) {
201		dev_err(dev, "RTC read data register failed\n");
202		return rc;
203	}
204
205	if (unlikely(reg < value[0])) {
206		rc = pm8xxx_read_wrapper(rtc_dd, value,
207				rtc_dd->rtc_read_base, NUM_8_BIT_RTC_REGS);
208		if (rc < 0) {
209			dev_err(dev, "RTC read data register failed\n");
210			return rc;
211		}
212	}
213
214	secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
215
216	rtc_time_to_tm(secs, tm);
217
218	rc = rtc_valid_tm(tm);
219	if (rc < 0) {
220		dev_err(dev, "Invalid time read from RTC\n");
221		return rc;
222	}
223
224	dev_dbg(dev, "secs = %lu, h:m:s == %d:%d:%d, d/m/y = %d/%d/%d\n",
225				secs, tm->tm_hour, tm->tm_min, tm->tm_sec,
226				tm->tm_mday, tm->tm_mon, tm->tm_year);
227
228	return 0;
229}
230
231static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
232{
233	int rc, i;
234	u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg;
235	unsigned long secs, irq_flags;
236	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
237
238	rtc_tm_to_time(&alarm->time, &secs);
239
240	for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
241		value[i] = secs & 0xFF;
242		secs >>= 8;
243	}
244
245	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
246
247	rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
248							NUM_8_BIT_RTC_REGS);
249	if (rc < 0) {
250		dev_err(dev, "Write to RTC ALARM register failed\n");
251		goto rtc_rw_fail;
252	}
253
254	ctrl_reg = rtc_dd->ctrl_reg;
255	ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
256					(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
257
258	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
259	if (rc < 0) {
260		dev_err(dev, "Write to RTC control register failed\n");
261		goto rtc_rw_fail;
262	}
263
264	rtc_dd->ctrl_reg = ctrl_reg;
265
266	dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
267				alarm->time.tm_hour, alarm->time.tm_min,
268				alarm->time.tm_sec, alarm->time.tm_mday,
269				alarm->time.tm_mon, alarm->time.tm_year);
270rtc_rw_fail:
271	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
272	return rc;
273}
274
275static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
276{
277	int rc;
278	u8 value[NUM_8_BIT_RTC_REGS];
279	unsigned long secs;
280	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
281
282	rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
283			NUM_8_BIT_RTC_REGS);
284	if (rc < 0) {
285		dev_err(dev, "RTC alarm time read failed\n");
286		return rc;
287	}
288
289	secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
290
291	rtc_time_to_tm(secs, &alarm->time);
292
293	rc = rtc_valid_tm(&alarm->time);
294	if (rc < 0) {
295		dev_err(dev, "Invalid alarm time read from RTC\n");
296		return rc;
297	}
298
299	dev_dbg(dev, "Alarm set for - h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
300				alarm->time.tm_hour, alarm->time.tm_min,
301				alarm->time.tm_sec, alarm->time.tm_mday,
302				alarm->time.tm_mon, alarm->time.tm_year);
303
304	return 0;
305}
306
307static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
308{
309	int rc;
310	unsigned long irq_flags;
311	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
312	u8 ctrl_reg;
313
314	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
315	ctrl_reg = rtc_dd->ctrl_reg;
316	ctrl_reg = (enable) ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
317				(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
318
319	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
320	if (rc < 0) {
321		dev_err(dev, "Write to RTC control register failed\n");
322		goto rtc_rw_fail;
323	}
324
325	rtc_dd->ctrl_reg = ctrl_reg;
326
327rtc_rw_fail:
328	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
329	return rc;
330}
331
332static struct rtc_class_ops pm8xxx_rtc_ops = {
333	.read_time	= pm8xxx_rtc_read_time,
334	.set_alarm	= pm8xxx_rtc_set_alarm,
335	.read_alarm	= pm8xxx_rtc_read_alarm,
336	.alarm_irq_enable = pm8xxx_rtc_alarm_irq_enable,
337};
338
339static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
340{
341	struct pm8xxx_rtc *rtc_dd = dev_id;
342	u8 ctrl_reg;
343	int rc;
344	unsigned long irq_flags;
345
346	rtc_update_irq(rtc_dd->rtc, 1, RTC_IRQF | RTC_AF);
347
348	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
349
350	/* Clear the alarm enable bit */
351	ctrl_reg = rtc_dd->ctrl_reg;
352	ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
353
354	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
355	if (rc < 0) {
356		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
357		dev_err(rtc_dd->rtc_dev, "Write to RTC control register "
358								"failed\n");
359		goto rtc_alarm_handled;
360	}
361
362	rtc_dd->ctrl_reg = ctrl_reg;
363	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
364
365	/* Clear RTC alarm register */
366	rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
367						PM8XXX_ALARM_CTRL_OFFSET, 1);
368	if (rc < 0) {
369		dev_err(rtc_dd->rtc_dev, "RTC Alarm control register read "
370								"failed\n");
371		goto rtc_alarm_handled;
372	}
373
374	ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR;
375	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
376						PM8XXX_ALARM_CTRL_OFFSET, 1);
377	if (rc < 0)
378		dev_err(rtc_dd->rtc_dev, "Write to RTC Alarm control register"
379								" failed\n");
380
381rtc_alarm_handled:
382	return IRQ_HANDLED;
383}
384
385static int __devinit pm8xxx_rtc_probe(struct platform_device *pdev)
386{
387	int rc;
388	u8 ctrl_reg;
389	bool rtc_write_enable = false;
390	struct pm8xxx_rtc *rtc_dd;
391	struct resource *rtc_resource;
392	const struct pm8xxx_rtc_platform_data *pdata =
393						dev_get_platdata(&pdev->dev);
394
395	if (pdata != NULL)
396		rtc_write_enable = pdata->rtc_write_enable;
397
398	rtc_dd = kzalloc(sizeof(*rtc_dd), GFP_KERNEL);
399	if (rtc_dd == NULL) {
400		dev_err(&pdev->dev, "Unable to allocate memory!\n");
401		return -ENOMEM;
402	}
403
404	/* Initialise spinlock to protect RTC control register */
405	spin_lock_init(&rtc_dd->ctrl_reg_lock);
406
407	rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0);
408	if (rtc_dd->rtc_alarm_irq < 0) {
409		dev_err(&pdev->dev, "Alarm IRQ resource absent!\n");
410		rc = -ENXIO;
411		goto fail_rtc_enable;
412	}
413
414	rtc_resource = platform_get_resource_byname(pdev, IORESOURCE_IO,
415							"pmic_rtc_base");
416	if (!(rtc_resource && rtc_resource->start)) {
417		dev_err(&pdev->dev, "RTC IO resource absent!\n");
418		rc = -ENXIO;
419		goto fail_rtc_enable;
420	}
421
422	rtc_dd->rtc_base = rtc_resource->start;
423
424	/* Setup RTC register addresses */
425	rtc_dd->rtc_write_base = rtc_dd->rtc_base + PM8XXX_RTC_WRITE_OFFSET;
426	rtc_dd->rtc_read_base = rtc_dd->rtc_base + PM8XXX_RTC_READ_OFFSET;
427	rtc_dd->alarm_rw_base = rtc_dd->rtc_base + PM8XXX_ALARM_RW_OFFSET;
428
429	rtc_dd->rtc_dev = &pdev->dev;
430
431	/* Check if the RTC is on, else turn it on */
432	rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
433	if (rc < 0) {
434		dev_err(&pdev->dev, "RTC control register read failed!\n");
435		goto fail_rtc_enable;
436	}
437
438	if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
439		ctrl_reg |= PM8xxx_RTC_ENABLE;
440		rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
441									1);
442		if (rc < 0) {
443			dev_err(&pdev->dev, "Write to RTC control register "
444								"failed\n");
445			goto fail_rtc_enable;
446		}
447	}
448
449	rtc_dd->ctrl_reg = ctrl_reg;
450	if (rtc_write_enable == true)
451		pm8xxx_rtc_ops.set_time = pm8xxx_rtc_set_time;
452
453	platform_set_drvdata(pdev, rtc_dd);
454
455	/* Register the RTC device */
456	rtc_dd->rtc = rtc_device_register("pm8xxx_rtc", &pdev->dev,
457				&pm8xxx_rtc_ops, THIS_MODULE);
458	if (IS_ERR(rtc_dd->rtc)) {
459		dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n",
460					__func__, PTR_ERR(rtc_dd->rtc));
461		rc = PTR_ERR(rtc_dd->rtc);
462		goto fail_rtc_enable;
463	}
464
465	/* Request the alarm IRQ */
466	rc = request_any_context_irq(rtc_dd->rtc_alarm_irq,
467				 pm8xxx_alarm_trigger, IRQF_TRIGGER_RISING,
468				 "pm8xxx_rtc_alarm", rtc_dd);
469	if (rc < 0) {
470		dev_err(&pdev->dev, "Request IRQ failed (%d)\n", rc);
471		goto fail_req_irq;
472	}
473
474	device_init_wakeup(&pdev->dev, 1);
475
476	dev_dbg(&pdev->dev, "Probe success !!\n");
477
478	return 0;
479
480fail_req_irq:
481	rtc_device_unregister(rtc_dd->rtc);
482fail_rtc_enable:
483	platform_set_drvdata(pdev, NULL);
484	kfree(rtc_dd);
485	return rc;
486}
487
488static int __devexit pm8xxx_rtc_remove(struct platform_device *pdev)
489{
490	struct pm8xxx_rtc *rtc_dd = platform_get_drvdata(pdev);
491
492	device_init_wakeup(&pdev->dev, 0);
493	free_irq(rtc_dd->rtc_alarm_irq, rtc_dd);
494	rtc_device_unregister(rtc_dd->rtc);
495	platform_set_drvdata(pdev, NULL);
496	kfree(rtc_dd);
497
498	return 0;
499}
500
501#ifdef CONFIG_PM_SLEEP
502static int pm8xxx_rtc_resume(struct device *dev)
503{
504	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
505
506	if (device_may_wakeup(dev))
507		disable_irq_wake(rtc_dd->rtc_alarm_irq);
508
509	return 0;
510}
511
512static int pm8xxx_rtc_suspend(struct device *dev)
513{
514	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
515
516	if (device_may_wakeup(dev))
517		enable_irq_wake(rtc_dd->rtc_alarm_irq);
518
519	return 0;
520}
521#endif
522
523SIMPLE_DEV_PM_OPS(pm8xxx_rtc_pm_ops, pm8xxx_rtc_suspend, pm8xxx_rtc_resume);
524
525static struct platform_driver pm8xxx_rtc_driver = {
526	.probe		= pm8xxx_rtc_probe,
527	.remove		= __devexit_p(pm8xxx_rtc_remove),
528	.driver	= {
529		.name	= PM8XXX_RTC_DEV_NAME,
530		.owner	= THIS_MODULE,
531		.pm	= &pm8xxx_rtc_pm_ops,
532	},
533};
534
535static int __init pm8xxx_rtc_init(void)
536{
537	return platform_driver_register(&pm8xxx_rtc_driver);
538}
539module_init(pm8xxx_rtc_init);
540
541static void __exit pm8xxx_rtc_exit(void)
542{
543	platform_driver_unregister(&pm8xxx_rtc_driver);
544}
545module_exit(pm8xxx_rtc_exit);
546
547MODULE_ALIAS("platform:rtc-pm8xxx");
548MODULE_DESCRIPTION("PMIC8xxx RTC driver");
549MODULE_LICENSE("GPL v2");
550MODULE_AUTHOR("Anirudh Ghayal <aghayal@codeaurora.org>");