Loading...
1/***********************license start***************
2 * Author: Cavium Networks
3 *
4 * Contact: support@caviumnetworks.com
5 * This file is part of the OCTEON SDK
6 *
7 * Copyright (c) 2003-2008 Cavium Networks
8 *
9 * This file is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License, Version 2, as
11 * published by the Free Software Foundation.
12 *
13 * This file is distributed in the hope that it will be useful, but
14 * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16 * NONINFRINGEMENT. See the GNU General Public License for more
17 * details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this file; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 * or visit http://www.gnu.org/licenses/.
23 *
24 * This file may also be available under a different license from Cavium.
25 * Contact Cavium Networks for more information
26 ***********************license end**************************************/
27
28/**
29 *
30 * This header file defines the work queue entry (wqe) data structure.
31 * Since this is a commonly used structure that depends on structures
32 * from several hardware blocks, those definitions have been placed
33 * in this file to create a single point of definition of the wqe
34 * format.
35 * Data structures are still named according to the block that they
36 * relate to.
37 *
38 */
39
40#ifndef __CVMX_WQE_H__
41#define __CVMX_WQE_H__
42
43#include <asm/octeon/cvmx-packet.h>
44
45
46#define OCT_TAG_TYPE_STRING(x) \
47 (((x) == CVMX_POW_TAG_TYPE_ORDERED) ? "ORDERED" : \
48 (((x) == CVMX_POW_TAG_TYPE_ATOMIC) ? "ATOMIC" : \
49 (((x) == CVMX_POW_TAG_TYPE_NULL) ? "NULL" : \
50 "NULL_NULL")))
51
52/**
53 * HW decode / err_code in work queue entry
54 */
55typedef union {
56 uint64_t u64;
57
58 /* Use this struct if the hardware determines that the packet is IP */
59 struct {
60 /* HW sets this to the number of buffers used by this packet */
61 uint64_t bufs:8;
62 /* HW sets to the number of L2 bytes prior to the IP */
63 uint64_t ip_offset:8;
64 /* set to 1 if we found DSA/VLAN in the L2 */
65 uint64_t vlan_valid:1;
66 /* Set to 1 if the DSA/VLAN tag is stacked */
67 uint64_t vlan_stacked:1;
68 uint64_t unassigned:1;
69 /* HW sets to the DSA/VLAN CFI flag (valid when vlan_valid) */
70 uint64_t vlan_cfi:1;
71 /* HW sets to the DSA/VLAN_ID field (valid when vlan_valid) */
72 uint64_t vlan_id:12;
73 /* Ring Identifier (if PCIe). Requires PIP_GBL_CTL[RING_EN]=1 */
74 uint64_t pr:4;
75 uint64_t unassigned2:8;
76 /* the packet needs to be decompressed */
77 uint64_t dec_ipcomp:1;
78 /* the packet is either TCP or UDP */
79 uint64_t tcp_or_udp:1;
80 /* the packet needs to be decrypted (ESP or AH) */
81 uint64_t dec_ipsec:1;
82 /* the packet is IPv6 */
83 uint64_t is_v6:1;
84
85 /*
86 * (rcv_error, not_IP, IP_exc, is_frag, L4_error,
87 * software, etc.).
88 */
89
90 /*
91 * reserved for software use, hardware will clear on
92 * packet creation.
93 */
94 uint64_t software:1;
95 /* exceptional conditions below */
96 /* the receive interface hardware detected an L4 error
97 * (only applies if !is_frag) (only applies if
98 * !rcv_error && !not_IP && !IP_exc && !is_frag)
99 * failure indicated in err_code below, decode:
100 *
101 * - 1 = Malformed L4
102 * - 2 = L4 Checksum Error: the L4 checksum value is
103 * - 3 = UDP Length Error: The UDP length field would
104 * make the UDP data longer than what remains in
105 * the IP packet (as defined by the IP header
106 * length field).
107 * - 4 = Bad L4 Port: either the source or destination
108 * TCP/UDP port is 0.
109 * - 8 = TCP FIN Only: the packet is TCP and only the
110 * FIN flag set.
111 * - 9 = TCP No Flags: the packet is TCP and no flags
112 * are set.
113 * - 10 = TCP FIN RST: the packet is TCP and both FIN
114 * and RST are set.
115 * - 11 = TCP SYN URG: the packet is TCP and both SYN
116 * and URG are set.
117 * - 12 = TCP SYN RST: the packet is TCP and both SYN
118 * and RST are set.
119 * - 13 = TCP SYN FIN: the packet is TCP and both SYN
120 * and FIN are set.
121 */
122 uint64_t L4_error:1;
123 /* set if the packet is a fragment */
124 uint64_t is_frag:1;
125 /* the receive interface hardware detected an IP error
126 * / exception (only applies if !rcv_error && !not_IP)
127 * failure indicated in err_code below, decode:
128 *
129 * - 1 = Not IP: the IP version field is neither 4 nor
130 * 6.
131 * - 2 = IPv4 Header Checksum Error: the IPv4 header
132 * has a checksum violation.
133 * - 3 = IP Malformed Header: the packet is not long
134 * enough to contain the IP header.
135 * - 4 = IP Malformed: the packet is not long enough
136 * to contain the bytes indicated by the IP
137 * header. Pad is allowed.
138 * - 5 = IP TTL Hop: the IPv4 TTL field or the IPv6
139 * Hop Count field are zero.
140 * - 6 = IP Options
141 */
142 uint64_t IP_exc:1;
143 /*
144 * Set if the hardware determined that the packet is a
145 * broadcast.
146 */
147 uint64_t is_bcast:1;
148 /*
149 * St if the hardware determined that the packet is a
150 * multi-cast.
151 */
152 uint64_t is_mcast:1;
153 /*
154 * Set if the packet may not be IP (must be zero in
155 * this case).
156 */
157 uint64_t not_IP:1;
158 /*
159 * The receive interface hardware detected a receive
160 * error (must be zero in this case).
161 */
162 uint64_t rcv_error:1;
163 /* lower err_code = first-level descriptor of the
164 * work */
165 /* zero for packet submitted by hardware that isn't on
166 * the slow path */
167 /* type is cvmx_pip_err_t */
168 uint64_t err_code:8;
169 } s;
170
171 /* use this to get at the 16 vlan bits */
172 struct {
173 uint64_t unused1:16;
174 uint64_t vlan:16;
175 uint64_t unused2:32;
176 } svlan;
177
178 /*
179 * use this struct if the hardware could not determine that
180 * the packet is ip.
181 */
182 struct {
183 /*
184 * HW sets this to the number of buffers used by this
185 * packet.
186 */
187 uint64_t bufs:8;
188 uint64_t unused:8;
189 /* set to 1 if we found DSA/VLAN in the L2 */
190 uint64_t vlan_valid:1;
191 /* Set to 1 if the DSA/VLAN tag is stacked */
192 uint64_t vlan_stacked:1;
193 uint64_t unassigned:1;
194 /*
195 * HW sets to the DSA/VLAN CFI flag (valid when
196 * vlan_valid)
197 */
198 uint64_t vlan_cfi:1;
199 /*
200 * HW sets to the DSA/VLAN_ID field (valid when
201 * vlan_valid).
202 */
203 uint64_t vlan_id:12;
204 /*
205 * Ring Identifier (if PCIe). Requires
206 * PIP_GBL_CTL[RING_EN]=1
207 */
208 uint64_t pr:4;
209 uint64_t unassigned2:12;
210 /*
211 * reserved for software use, hardware will clear on
212 * packet creation.
213 */
214 uint64_t software:1;
215 uint64_t unassigned3:1;
216 /*
217 * set if the hardware determined that the packet is
218 * rarp.
219 */
220 uint64_t is_rarp:1;
221 /*
222 * set if the hardware determined that the packet is
223 * arp
224 */
225 uint64_t is_arp:1;
226 /*
227 * set if the hardware determined that the packet is a
228 * broadcast.
229 */
230 uint64_t is_bcast:1;
231 /*
232 * set if the hardware determined that the packet is a
233 * multi-cast
234 */
235 uint64_t is_mcast:1;
236 /*
237 * set if the packet may not be IP (must be one in
238 * this case)
239 */
240 uint64_t not_IP:1;
241 /* The receive interface hardware detected a receive
242 * error. Failure indicated in err_code below,
243 * decode:
244 *
245 * - 1 = partial error: a packet was partially
246 * received, but internal buffering / bandwidth
247 * was not adequate to receive the entire
248 * packet.
249 * - 2 = jabber error: the RGMII packet was too large
250 * and is truncated.
251 * - 3 = overrun error: the RGMII packet is longer
252 * than allowed and had an FCS error.
253 * - 4 = oversize error: the RGMII packet is longer
254 * than allowed.
255 * - 5 = alignment error: the RGMII packet is not an
256 * integer number of bytes
257 * and had an FCS error (100M and 10M only).
258 * - 6 = fragment error: the RGMII packet is shorter
259 * than allowed and had an FCS error.
260 * - 7 = GMX FCS error: the RGMII packet had an FCS
261 * error.
262 * - 8 = undersize error: the RGMII packet is shorter
263 * than allowed.
264 * - 9 = extend error: the RGMII packet had an extend
265 * error.
266 * - 10 = length mismatch error: the RGMII packet had
267 * a length that did not match the length field
268 * in the L2 HDR.
269 * - 11 = RGMII RX error/SPI4 DIP4 Error: the RGMII
270 * packet had one or more data reception errors
271 * (RXERR) or the SPI4 packet had one or more
272 * DIP4 errors.
273 * - 12 = RGMII skip error/SPI4 Abort Error: the RGMII
274 * packet was not large enough to cover the
275 * skipped bytes or the SPI4 packet was
276 * terminated with an About EOPS.
277 * - 13 = RGMII nibble error/SPI4 Port NXA Error: the
278 * RGMII packet had a studder error (data not
279 * repeated - 10/100M only) or the SPI4 packet
280 * was sent to an NXA.
281 * - 16 = FCS error: a SPI4.2 packet had an FCS error.
282 * - 17 = Skip error: a packet was not large enough to
283 * cover the skipped bytes.
284 * - 18 = L2 header malformed: the packet is not long
285 * enough to contain the L2.
286 */
287
288 uint64_t rcv_error:1;
289 /*
290 * lower err_code = first-level descriptor of the
291 * work
292 */
293 /*
294 * zero for packet submitted by hardware that isn't on
295 * the slow path
296 */
297 /* type is cvmx_pip_err_t (union, so can't use directly */
298 uint64_t err_code:8;
299 } snoip;
300
301} cvmx_pip_wqe_word2;
302
303/**
304 * Work queue entry format
305 *
306 * must be 8-byte aligned
307 */
308typedef struct {
309
310 /*****************************************************************
311 * WORD 0
312 * HW WRITE: the following 64 bits are filled by HW when a packet arrives
313 */
314
315 /**
316 * raw chksum result generated by the HW
317 */
318 uint16_t hw_chksum;
319 /**
320 * Field unused by hardware - available for software
321 */
322 uint8_t unused;
323 /**
324 * Next pointer used by hardware for list maintenance.
325 * May be written/read by HW before the work queue
326 * entry is scheduled to a PP
327 * (Only 36 bits used in Octeon 1)
328 */
329 uint64_t next_ptr:40;
330
331 /*****************************************************************
332 * WORD 1
333 * HW WRITE: the following 64 bits are filled by HW when a packet arrives
334 */
335
336 /**
337 * HW sets to the total number of bytes in the packet
338 */
339 uint64_t len:16;
340 /**
341 * HW sets this to input physical port
342 */
343 uint64_t ipprt:6;
344
345 /**
346 * HW sets this to what it thought the priority of the input packet was
347 */
348 uint64_t qos:3;
349
350 /**
351 * the group that the work queue entry will be scheduled to
352 */
353 uint64_t grp:4;
354 /**
355 * the type of the tag (ORDERED, ATOMIC, NULL)
356 */
357 uint64_t tag_type:3;
358 /**
359 * the synchronization/ordering tag
360 */
361 uint64_t tag:32;
362
363 /**
364 * WORD 2 HW WRITE: the following 64-bits are filled in by
365 * hardware when a packet arrives This indicates a variety of
366 * status and error conditions.
367 */
368 cvmx_pip_wqe_word2 word2;
369
370 /**
371 * Pointer to the first segment of the packet.
372 */
373 union cvmx_buf_ptr packet_ptr;
374
375 /**
376 * HW WRITE: octeon will fill in a programmable amount from the
377 * packet, up to (at most, but perhaps less) the amount
378 * needed to fill the work queue entry to 128 bytes
379 *
380 * If the packet is recognized to be IP, the hardware starts
381 * (except that the IPv4 header is padded for appropriate
382 * alignment) writing here where the IP header starts. If the
383 * packet is not recognized to be IP, the hardware starts
384 * writing the beginning of the packet here.
385 */
386 uint8_t packet_data[96];
387
388 /**
389 * If desired, SW can make the work Q entry any length. For the
390 * purposes of discussion here, Assume 128B always, as this is all that
391 * the hardware deals with.
392 *
393 */
394
395} CVMX_CACHE_LINE_ALIGNED cvmx_wqe_t;
396
397#endif /* __CVMX_WQE_H__ */