Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 | config BF52x def_bool y depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) if (BF52x) source "arch/blackfin/mach-bf527/boards/Kconfig" menu "BF527 Specific Configuration" comment "Alternative Multiplexing Scheme" choice prompt "SPORT0" default BF527_SPORT0_PORTG help Select PORT used for SPORT0. See Hardware Reference Manual config BF527_SPORT0_PORTF bool "PORT F" help PORT F config BF527_SPORT0_PORTG bool "PORT G" help PORT G endchoice choice prompt "SPORT0 TSCLK Location" depends on BF527_SPORT0_PORTG default BF527_SPORT0_TSCLK_PG10 help Select PIN used for SPORT0_TSCLK. See Hardware Reference Manual config BF527_SPORT0_TSCLK_PG10 bool "PORT PG10" help PORT PG10 config BF527_SPORT0_TSCLK_PG14 bool "PORT PG14" help PORT PG14 endchoice choice prompt "UART1" default BF527_UART1_PORTF help Select PORT used for UART1. See Hardware Reference Manual config BF527_UART1_PORTF bool "PORT F" help PORT F config BF527_UART1_PORTG bool "PORT G" help PORT G endchoice choice prompt "NAND (NFC) Data" default BF527_NAND_D_PORTH help Select PORT used for NAND Data Bus. See Hardware Reference Manual config BF527_NAND_D_PORTF bool "PORT F" help PORT F config BF527_NAND_D_PORTH bool "PORT H" help PORT H endchoice comment "Hysteresis/Schmitt Trigger Control" config BFIN_HYSTERESIS_CONTROL bool "Enable Hysteresis Control" help The ADSP-BF52x allows to control input hysteresis for Port F, Port G and Port H and other processor signal inputs. The Schmitt trigger enables can be set only for pin groups. Saying Y will overwrite the default reset or boot loader initialization. menu "PORT F" depends on BFIN_HYSTERESIS_CONTROL config GPIO_HYST_PORTF_0_7 bool "Enable Hysteresis on PORTF {0...7}" config GPIO_HYST_PORTF_8_9 bool "Enable Hysteresis on PORTF {8, 9}" config GPIO_HYST_PORTF_10 bool "Enable Hysteresis on PORTF 10" config GPIO_HYST_PORTF_11 bool "Enable Hysteresis on PORTF 11" config GPIO_HYST_PORTF_12_13 bool "Enable Hysteresis on PORTF {12, 13}" config GPIO_HYST_PORTF_14_15 bool "Enable Hysteresis on PORTF {14, 15}" endmenu menu "PORT G" depends on BFIN_HYSTERESIS_CONTROL config GPIO_HYST_PORTG_0 bool "Enable Hysteresis on PORTG 0" config GPIO_HYST_PORTG_1_4 bool "Enable Hysteresis on PORTG {1...4}" config GPIO_HYST_PORTG_5_6 bool "Enable Hysteresis on PORTG {5, 6}" config GPIO_HYST_PORTG_7_8 bool "Enable Hysteresis on PORTG {7, 8}" config GPIO_HYST_PORTG_9 bool "Enable Hysteresis on PORTG 9" config GPIO_HYST_PORTG_10 bool "Enable Hysteresis on PORTG 10" config GPIO_HYST_PORTG_11_13 bool "Enable Hysteresis on PORTG {11...13}" config GPIO_HYST_PORTG_14_15 bool "Enable Hysteresis on PORTG {14, 15}" endmenu menu "PORT H" depends on BFIN_HYSTERESIS_CONTROL config GPIO_HYST_PORTH_0_7 bool "Enable Hysteresis on PORTH {0...7}" config GPIO_HYST_PORTH_8 bool "Enable Hysteresis on PORTH 8" config GPIO_HYST_PORTH_9_15 bool "Enable Hysteresis on PORTH {9...15}" endmenu menu "None-GPIO" depends on BFIN_HYSTERESIS_CONTROL config NONEGPIO_HYST_TMR0_FS1_PPICLK bool "Enable Hysteresis on {TMR0, PPI_FS1, PPI_CLK}" config NONEGPIO_HYST_NMI_RST_BMODE bool "Enable Hysteresis on {NMI, RESET, BMODE}" config NONEGPIO_HYST_JTAG bool "Enable Hysteresis on JTAG" endmenu comment "Interrupt Priority Assignment" menu "Priority" config IRQ_PLL_WAKEUP int "IRQ_PLL_WAKEUP" default 7 config IRQ_DMA0_ERROR int "IRQ_DMA0_ERROR" default 7 config IRQ_DMAR0_BLK int "IRQ_DMAR0_BLK" default 7 config IRQ_DMAR1_BLK int "IRQ_DMAR1_BLK" default 7 config IRQ_DMAR0_OVR int "IRQ_DMAR0_OVR" default 7 config IRQ_DMAR1_OVR int "IRQ_DMAR1_OVR" default 7 config IRQ_PPI_ERROR int "IRQ_PPI_ERROR" default 7 config IRQ_MAC_ERROR int "IRQ_MAC_ERROR" default 7 config IRQ_SPORT0_ERROR int "IRQ_SPORT0_ERROR" default 7 config IRQ_SPORT1_ERROR int "IRQ_SPORT1_ERROR" default 7 config IRQ_UART0_ERROR int "IRQ_UART0_ERROR" default 7 config IRQ_UART1_ERROR int "IRQ_UART1_ERROR" default 7 config IRQ_RTC int "IRQ_RTC" default 8 config IRQ_PPI int "IRQ_PPI" default 8 config IRQ_SPORT0_RX int "IRQ_SPORT0_RX" default 9 config IRQ_SPORT0_TX int "IRQ_SPORT0_TX" default 9 config IRQ_SPORT1_RX int "IRQ_SPORT1_RX" default 9 config IRQ_SPORT1_TX int "IRQ_SPORT1_TX" default 9 config IRQ_TWI int "IRQ_TWI" default 10 config IRQ_SPI int "IRQ_SPI" default 10 config IRQ_UART0_RX int "IRQ_UART0_RX" default 10 config IRQ_UART0_TX int "IRQ_UART0_TX" default 10 config IRQ_UART1_RX int "IRQ_UART1_RX" default 10 config IRQ_UART1_TX int "IRQ_UART1_TX" default 10 config IRQ_OPTSEC int "IRQ_OPTSEC" default 11 config IRQ_CNT int "IRQ_CNT" default 11 config IRQ_MAC_RX int "IRQ_MAC_RX" default 11 config IRQ_PORTH_INTA int "IRQ_PORTH_INTA" default 11 config IRQ_MAC_TX int "IRQ_MAC_TX/NFC" default 11 config IRQ_PORTH_INTB int "IRQ_PORTH_INTB" default 11 config IRQ_TIMER0 int "IRQ_TIMER0" default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "IRQ_TIMER1" default 12 config IRQ_TIMER2 int "IRQ_TIMER2" default 12 config IRQ_TIMER3 int "IRQ_TIMER3" default 12 config IRQ_TIMER4 int "IRQ_TIMER4" default 12 config IRQ_TIMER5 int "IRQ_TIMER5" default 12 config IRQ_TIMER6 int "IRQ_TIMER6" default 12 config IRQ_TIMER7 int "IRQ_TIMER7" default 12 config IRQ_PORTG_INTA int "IRQ_PORTG_INTA" default 12 config IRQ_PORTG_INTB int "IRQ_PORTG_INTB" default 12 config IRQ_MEM_DMA0 int "IRQ_MEM_DMA0" default 13 config IRQ_MEM_DMA1 int "IRQ_MEM_DMA1" default 13 config IRQ_WATCH int "IRQ_WATCH" default 13 config IRQ_PORTF_INTA int "IRQ_PORTF_INTA" default 13 config IRQ_PORTF_INTB int "IRQ_PORTF_INTB" default 13 config IRQ_SPI_ERROR int "IRQ_SPI_ERROR" default 7 config IRQ_NFC_ERROR int "IRQ_NFC_ERROR" default 7 config IRQ_HDMA_ERROR int "IRQ_HDMA_ERROR" default 7 config IRQ_HDMA int "IRQ_HDMA" default 7 config IRQ_USB_EINT int "IRQ_USB_EINT" default 10 config IRQ_USB_INT0 int "IRQ_USB_INT0" default 10 config IRQ_USB_INT1 int "IRQ_USB_INT1" default 10 config IRQ_USB_INT2 int "IRQ_USB_INT2" default 10 config IRQ_USB_DMA int "IRQ_USB_DMA" default 10 help Enter the priority numbers between 7-13 ONLY. Others are Reserved. This applies to all the above. It is not recommended to assign the highest priority number 7 to UART or any other device. endmenu endmenu endif |