1/* hamachi.c: A Packet Engines GNIC-II Gigabit Ethernet driver for Linux. */
   2/*
   3	Written 1998-2000 by Donald Becker.
   4	Updates 2000 by Keith Underwood.
   5
   6	This software may be used and distributed according to the terms of
   7	the GNU General Public License (GPL), incorporated herein by reference.
   8	Drivers based on or derived from this code fall under the GPL and must
   9	retain the authorship, copyright and license notice.  This file is not
  10	a complete program and may only be used when the entire operating
  11	system is licensed under the GPL.
  12
  13	The author may be reached as becker@scyld.com, or C/O
  14	Scyld Computing Corporation
  15	410 Severn Ave., Suite 210
  16	Annapolis MD 21403
  17
  18	This driver is for the Packet Engines GNIC-II PCI Gigabit Ethernet
  19	adapter.
  20
  21	Support and updates available at
  22	http://www.scyld.com/network/hamachi.html
  23	[link no longer provides useful info -jgarzik]
  24	or
  25	http://www.parl.clemson.edu/~keithu/hamachi.html
  26
  27*/
  28
  29#define DRV_NAME	"hamachi"
  30#define DRV_VERSION	"2.1"
  31#define DRV_RELDATE	"Sept 11, 2006"
  32
  33
  34/* A few user-configurable values. */
  35
  36static int debug = 1;		/* 1 normal messages, 0 quiet .. 7 verbose.  */
  37#define final_version
  38#define hamachi_debug debug
  39/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
  40static int max_interrupt_work = 40;
  41static int mtu;
  42/* Default values selected by testing on a dual processor PIII-450 */
  43/* These six interrupt control parameters may be set directly when loading the
  44 * module, or through the rx_params and tx_params variables
  45 */
  46static int max_rx_latency = 0x11;
  47static int max_rx_gap = 0x05;
  48static int min_rx_pkt = 0x18;
  49static int max_tx_latency = 0x00;
  50static int max_tx_gap = 0x00;
  51static int min_tx_pkt = 0x30;
  52
  53/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
  54   -Setting to > 1518 causes all frames to be copied
  55	-Setting to 0 disables copies
  56*/
  57static int rx_copybreak;
  58
  59/* An override for the hardware detection of bus width.
  60	Set to 1 to force 32 bit PCI bus detection.  Set to 4 to force 64 bit.
  61	Add 2 to disable parity detection.
  62*/
  63static int force32;
  64
  65
  66/* Used to pass the media type, etc.
  67   These exist for driver interoperability.
  68   No media types are currently defined.
  69		- The lower 4 bits are reserved for the media type.
  70		- The next three bits may be set to one of the following:
  71			0x00000000 : Autodetect PCI bus
  72			0x00000010 : Force 32 bit PCI bus
  73			0x00000020 : Disable parity detection
  74			0x00000040 : Force 64 bit PCI bus
  75			Default is autodetect
  76		- The next bit can be used to force half-duplex.  This is a bad
  77		  idea since no known implementations implement half-duplex, and,
  78		  in general, half-duplex for gigabit ethernet is a bad idea.
  79			0x00000080 : Force half-duplex
  80			Default is full-duplex.
  81		- In the original driver, the ninth bit could be used to force
  82		  full-duplex.  Maintain that for compatibility
  83		   0x00000200 : Force full-duplex
  84*/
  85#define MAX_UNITS 8				/* More are supported, limit only on options */
  86static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
  87static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
  88/* The Hamachi chipset supports 3 parameters each for Rx and Tx
  89 * interruput management.  Parameters will be loaded as specified into
  90 * the TxIntControl and RxIntControl registers.
  91 *
  92 * The registers are arranged as follows:
  93 *     23 - 16   15 -  8   7    -    0
  94 *    _________________________________
  95 *   | min_pkt | max_gap | max_latency |
  96 *    ---------------------------------
  97 *   min_pkt      : The minimum number of packets processed between
  98 *                  interrupts.
  99 *   max_gap      : The maximum inter-packet gap in units of 8.192 us
 100 *   max_latency  : The absolute time between interrupts in units of 8.192 us
 101 *
 102 */
 103static int rx_params[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 104static int tx_params[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 105
 106/* Operational parameters that are set at compile time. */
 107
 108/* Keep the ring sizes a power of two for compile efficiency.
 109	The compiler will convert <unsigned>'%'<2^N> into a bit mask.
 110   Making the Tx ring too large decreases the effectiveness of channel
 111   bonding and packet priority.
 112   There are no ill effects from too-large receive rings, except for
 113	excessive memory usage */
 114/* Empirically it appears that the Tx ring needs to be a little bigger
 115   for these Gbit adapters or you get into an overrun condition really
 116   easily.  Also, things appear to work a bit better in back-to-back
 117   configurations if the Rx ring is 8 times the size of the Tx ring
 118*/
 119#define TX_RING_SIZE	64
 120#define RX_RING_SIZE	512
 121#define TX_TOTAL_SIZE	TX_RING_SIZE*sizeof(struct hamachi_desc)
 122#define RX_TOTAL_SIZE	RX_RING_SIZE*sizeof(struct hamachi_desc)
 123
 124/*
 125 * Enable netdev_ioctl.  Added interrupt coalescing parameter adjustment.
 126 * 2/19/99 Pete Wyckoff <wyckoff@ca.sandia.gov>
 127 */
 128
 129/* play with 64-bit addrlen; seems to be a teensy bit slower  --pw */
 130/* #define ADDRLEN 64 */
 131
 132/*
 133 * RX_CHECKSUM turns on card-generated receive checksum generation for
 134 *   TCP and UDP packets.  Otherwise the upper layers do the calculation.
 135 * 3/10/1999 Pete Wyckoff <wyckoff@ca.sandia.gov>
 136 */
 137#define RX_CHECKSUM
 138
 139/* Operational parameters that usually are not changed. */
 140/* Time in jiffies before concluding the transmitter is hung. */
 141#define TX_TIMEOUT  (5*HZ)
 142
 143#include <linux/capability.h>
 144#include <linux/module.h>
 145#include <linux/kernel.h>
 146#include <linux/string.h>
 147#include <linux/timer.h>
 148#include <linux/time.h>
 149#include <linux/errno.h>
 150#include <linux/ioport.h>
 151#include <linux/interrupt.h>
 152#include <linux/pci.h>
 153#include <linux/init.h>
 154#include <linux/ethtool.h>
 155#include <linux/mii.h>
 156#include <linux/netdevice.h>
 157#include <linux/etherdevice.h>
 158#include <linux/skbuff.h>
 159#include <linux/ip.h>
 160#include <linux/delay.h>
 161#include <linux/bitops.h>
 162
 163#include <asm/uaccess.h>
 164#include <asm/processor.h>	/* Processor type for cache alignment. */
 165#include <asm/io.h>
 166#include <asm/unaligned.h>
 167#include <asm/cache.h>
 168
 169static const char version[] =
 170KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE "  Written by Donald Becker\n"
 171"   Some modifications by Eric kasten <kasten@nscl.msu.edu>\n"
 172"   Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n";
 173
 174
 175/* IP_MF appears to be only defined in <netinet/ip.h>, however,
 176   we need it for hardware checksumming support.  FYI... some of
 177   the definitions in <netinet/ip.h> conflict/duplicate those in
 178   other linux headers causing many compiler warnings.
 179*/
 180#ifndef IP_MF
 181  #define IP_MF 0x2000   /* IP more frags from <netinet/ip.h> */
 182#endif
 183
 184/* Define IP_OFFSET to be IPOPT_OFFSET */
 185#ifndef IP_OFFSET
 186  #ifdef IPOPT_OFFSET
 187    #define IP_OFFSET IPOPT_OFFSET
 188  #else
 189    #define IP_OFFSET 2
 190  #endif
 191#endif
 192
 193#define RUN_AT(x) (jiffies + (x))
 194
 195#ifndef ADDRLEN
 196#define ADDRLEN 32
 197#endif
 198
 199/* Condensed bus+endian portability operations. */
 200#if ADDRLEN == 64
 201#define cpu_to_leXX(addr)	cpu_to_le64(addr)
 202#define leXX_to_cpu(addr)	le64_to_cpu(addr)
 203#else
 204#define cpu_to_leXX(addr)	cpu_to_le32(addr)
 205#define leXX_to_cpu(addr)	le32_to_cpu(addr)
 206#endif
 207
 208
 209/*
 210				Theory of Operation
 211
 212I. Board Compatibility
 213
 214This device driver is designed for the Packet Engines "Hamachi"
 215Gigabit Ethernet chip.  The only PCA currently supported is the GNIC-II 64-bit
 21666Mhz PCI card.
 217
 218II. Board-specific settings
 219
 220No jumpers exist on the board.  The chip supports software correction of
 221various motherboard wiring errors, however this driver does not support
 222that feature.
 223
 224III. Driver operation
 225
 226IIIa. Ring buffers
 227
 228The Hamachi uses a typical descriptor based bus-master architecture.
 229The descriptor list is similar to that used by the Digital Tulip.
 230This driver uses two statically allocated fixed-size descriptor lists
 231formed into rings by a branch from the final descriptor to the beginning of
 232the list.  The ring sizes are set at compile time by RX/TX_RING_SIZE.
 233
 234This driver uses a zero-copy receive and transmit scheme similar my other
 235network drivers.
 236The driver allocates full frame size skbuffs for the Rx ring buffers at
 237open() time and passes the skb->data field to the Hamachi as receive data
 238buffers.  When an incoming frame is less than RX_COPYBREAK bytes long,
 239a fresh skbuff is allocated and the frame is copied to the new skbuff.
 240When the incoming frame is larger, the skbuff is passed directly up the
 241protocol stack and replaced by a newly allocated skbuff.
 242
 243The RX_COPYBREAK value is chosen to trade-off the memory wasted by
 244using a full-sized skbuff for small frames vs. the copying costs of larger
 245frames.  Gigabit cards are typically used on generously configured machines
 246and the underfilled buffers have negligible impact compared to the benefit of
 247a single allocation size, so the default value of zero results in never
 248copying packets.
 249
 250IIIb/c. Transmit/Receive Structure
 251
 252The Rx and Tx descriptor structure are straight-forward, with no historical
 253baggage that must be explained.  Unlike the awkward DBDMA structure, there
 254are no unused fields or option bits that had only one allowable setting.
 255
 256Two details should be noted about the descriptors: The chip supports both 32
 257bit and 64 bit address structures, and the length field is overwritten on
 258the receive descriptors.  The descriptor length is set in the control word
 259for each channel. The development driver uses 32 bit addresses only, however
 26064 bit addresses may be enabled for 64 bit architectures e.g. the Alpha.
 261
 262IIId. Synchronization
 263
 264This driver is very similar to my other network drivers.
 265The driver runs as two independent, single-threaded flows of control.  One
 266is the send-packet routine, which enforces single-threaded use by the
 267dev->tbusy flag.  The other thread is the interrupt handler, which is single
 268threaded by the hardware and other software.
 269
 270The send packet thread has partial control over the Tx ring and 'dev->tbusy'
 271flag.  It sets the tbusy flag whenever it's queuing a Tx packet. If the next
 272queue slot is empty, it clears the tbusy flag when finished otherwise it sets
 273the 'hmp->tx_full' flag.
 274
 275The interrupt handler has exclusive control over the Rx ring and records stats
 276from the Tx ring.  After reaping the stats, it marks the Tx queue entry as
 277empty by incrementing the dirty_tx mark. Iff the 'hmp->tx_full' flag is set, it
 278clears both the tx_full and tbusy flags.
 279
 280IV. Notes
 281
 282Thanks to Kim Stearns of Packet Engines for providing a pair of GNIC-II boards.
 283
 284IVb. References
 285
 286Hamachi Engineering Design Specification, 5/15/97
 287(Note: This version was marked "Confidential".)
 288
 289IVc. Errata
 290
 291None noted.
 292
 293V.  Recent Changes
 294
 29501/15/1999 EPK  Enlargement of the TX and RX ring sizes.  This appears
 296    to help avoid some stall conditions -- this needs further research.
 297
 29801/15/1999 EPK  Creation of the hamachi_tx function.  This function cleans
 299    the Tx ring and is called from hamachi_start_xmit (this used to be
 300    called from hamachi_interrupt but it tends to delay execution of the
 301    interrupt handler and thus reduce bandwidth by reducing the latency
 302    between hamachi_rx()'s).  Notably, some modification has been made so
 303    that the cleaning loop checks only to make sure that the DescOwn bit
 304    isn't set in the status flag since the card is not required
 305    to set the entire flag to zero after processing.
 306
 30701/15/1999 EPK In the hamachi_start_tx function, the Tx ring full flag is
 308    checked before attempting to add a buffer to the ring.  If the ring is full
 309    an attempt is made to free any dirty buffers and thus find space for
 310    the new buffer or the function returns non-zero which should case the
 311    scheduler to reschedule the buffer later.
 312
 31301/15/1999 EPK Some adjustments were made to the chip initialization.
 314    End-to-end flow control should now be fully active and the interrupt
 315    algorithm vars have been changed.  These could probably use further tuning.
 316
 31701/15/1999 EPK Added the max_{rx,tx}_latency options.  These are used to
 318    set the rx and tx latencies for the Hamachi interrupts. If you're having
 319    problems with network stalls, try setting these to higher values.
 320    Valid values are 0x00 through 0xff.
 321
 32201/15/1999 EPK In general, the overall bandwidth has increased and
 323    latencies are better (sometimes by a factor of 2).  Stalls are rare at
 324    this point, however there still appears to be a bug somewhere between the
 325    hardware and driver.  TCP checksum errors under load also appear to be
 326    eliminated at this point.
 327
 32801/18/1999 EPK Ensured that the DescEndRing bit was being set on both the
 329    Rx and Tx rings.  This appears to have been affecting whether a particular
 330    peer-to-peer connection would hang under high load.  I believe the Rx
 331    rings was typically getting set correctly, but the Tx ring wasn't getting
 332    the DescEndRing bit set during initialization. ??? Does this mean the
 333    hamachi card is using the DescEndRing in processing even if a particular
 334    slot isn't in use -- hypothetically, the card might be searching the
 335    entire Tx ring for slots with the DescOwn bit set and then processing
 336    them.  If the DescEndRing bit isn't set, then it might just wander off
 337    through memory until it hits a chunk of data with that bit set
 338    and then looping back.
 339
 34002/09/1999 EPK Added Michel Mueller's TxDMA Interrupt and Tx-timeout
 341    problem (TxCmd and RxCmd need only to be set when idle or stopped.
 342
 34302/09/1999 EPK Added code to check/reset dev->tbusy in hamachi_interrupt.
 344    (Michel Mueller pointed out the ``permanently busy'' potential
 345    problem here).
 346
 34702/22/1999 EPK Added Pete Wyckoff's ioctl to control the Tx/Rx latencies.
 348
 34902/23/1999 EPK Verified that the interrupt status field bits for Tx were
 350    incorrectly defined and corrected (as per Michel Mueller).
 351
 35202/23/1999 EPK Corrected the Tx full check to check that at least 4 slots
 353    were available before reseting the tbusy and tx_full flags
 354    (as per Michel Mueller).
 355
 35603/11/1999 EPK Added Pete Wyckoff's hardware checksumming support.
 357
 35812/31/1999 KDU Cleaned up assorted things and added Don's code to force
 35932 bit.
 360
 36102/20/2000 KDU Some of the control was just plain odd.  Cleaned up the
 362hamachi_start_xmit() and hamachi_interrupt() code.  There is still some
 363re-structuring I would like to do.
 364
 36503/01/2000 KDU Experimenting with a WIDE range of interrupt mitigation
 366parameters on a dual P3-450 setup yielded the new default interrupt
 367mitigation parameters.  Tx should interrupt VERY infrequently due to
 368Eric's scheme.  Rx should be more often...
 369
 37003/13/2000 KDU Added a patch to make the Rx Checksum code interact
 371nicely with non-linux machines.
 372
 37303/13/2000 KDU Experimented with some of the configuration values:
 374
 375	-It seems that enabling PCI performance commands for descriptors
 376	(changing RxDMACtrl and TxDMACtrl lower nibble from 5 to D) has minimal
 377	performance impact for any of my tests. (ttcp, netpipe, netperf)  I will
 378	leave them that way until I hear further feedback.
 379
 380	-Increasing the PCI_LATENCY_TIMER to 130
 381	(2 + (burst size of 128 * (0 wait states + 1))) seems to slightly
 382	degrade performance.  Leaving default at 64 pending further information.
 383
 38403/14/2000 KDU Further tuning:
 385
 386	-adjusted boguscnt in hamachi_rx() to depend on interrupt
 387	mitigation parameters chosen.
 388
 389	-Selected a set of interrupt parameters based on some extensive testing.
 390	These may change with more testing.
 391
 392TO DO:
 393
 394-Consider borrowing from the acenic driver code to check PCI_COMMAND for
 395PCI_COMMAND_INVALIDATE.  Set maximum burst size to cache line size in
 396that case.
 397
 398-fix the reset procedure.  It doesn't quite work.
 399*/
 400
 401/* A few values that may be tweaked. */
 402/* Size of each temporary Rx buffer, calculated as:
 403 * 1518 bytes (ethernet packet) + 2 bytes (to get 8 byte alignment for
 404 * the card) + 8 bytes of status info + 8 bytes for the Rx Checksum
 405 */
 406#define PKT_BUF_SZ		1536
 407
 408/* For now, this is going to be set to the maximum size of an ethernet
 409 * packet.  Eventually, we may want to make it a variable that is
 410 * related to the MTU
 411 */
 412#define MAX_FRAME_SIZE  1518
 413
 414/* The rest of these values should never change. */
 415
 416static void hamachi_timer(unsigned long data);
 417
 418enum capability_flags {CanHaveMII=1, };
 419static const struct chip_info {
 420	u16	vendor_id, device_id, device_id_mask, pad;
 421	const char *name;
 422	void (*media_timer)(unsigned long data);
 423	int flags;
 424} chip_tbl[] = {
 425	{0x1318, 0x0911, 0xffff, 0, "Hamachi GNIC-II", hamachi_timer, 0},
 426	{0,},
 427};
 428
 429/* Offsets to the Hamachi registers.  Various sizes. */
 430enum hamachi_offsets {
 431	TxDMACtrl=0x00, TxCmd=0x04, TxStatus=0x06, TxPtr=0x08, TxCurPtr=0x10,
 432	RxDMACtrl=0x20, RxCmd=0x24, RxStatus=0x26, RxPtr=0x28, RxCurPtr=0x30,
 433	PCIClkMeas=0x060, MiscStatus=0x066, ChipRev=0x68, ChipReset=0x06B,
 434	LEDCtrl=0x06C, VirtualJumpers=0x06D, GPIO=0x6E,
 435	TxChecksum=0x074, RxChecksum=0x076,
 436	TxIntrCtrl=0x078, RxIntrCtrl=0x07C,
 437	InterruptEnable=0x080, InterruptClear=0x084, IntrStatus=0x088,
 438	EventStatus=0x08C,
 439	MACCnfg=0x0A0, FrameGap0=0x0A2, FrameGap1=0x0A4,
 440	/* See enum MII_offsets below. */
 441	MACCnfg2=0x0B0, RxDepth=0x0B8, FlowCtrl=0x0BC, MaxFrameSize=0x0CE,
 442	AddrMode=0x0D0, StationAddr=0x0D2,
 443	/* Gigabit AutoNegotiation. */
 444	ANCtrl=0x0E0, ANStatus=0x0E2, ANXchngCtrl=0x0E4, ANAdvertise=0x0E8,
 445	ANLinkPartnerAbility=0x0EA,
 446	EECmdStatus=0x0F0, EEData=0x0F1, EEAddr=0x0F2,
 447	FIFOcfg=0x0F8,
 448};
 449
 450/* Offsets to the MII-mode registers. */
 451enum MII_offsets {
 452	MII_Cmd=0xA6, MII_Addr=0xA8, MII_Wr_Data=0xAA, MII_Rd_Data=0xAC,
 453	MII_Status=0xAE,
 454};
 455
 456/* Bits in the interrupt status/mask registers. */
 457enum intr_status_bits {
 458	IntrRxDone=0x01, IntrRxPCIFault=0x02, IntrRxPCIErr=0x04,
 459	IntrTxDone=0x100, IntrTxPCIFault=0x200, IntrTxPCIErr=0x400,
 460	LinkChange=0x10000, NegotiationChange=0x20000, StatsMax=0x40000, };
 461
 462/* The Hamachi Rx and Tx buffer descriptors. */
 463struct hamachi_desc {
 464	__le32 status_n_length;
 465#if ADDRLEN == 64
 466	u32 pad;
 467	__le64 addr;
 468#else
 469	__le32 addr;
 470#endif
 471};
 472
 473/* Bits in hamachi_desc.status_n_length */
 474enum desc_status_bits {
 475	DescOwn=0x80000000, DescEndPacket=0x40000000, DescEndRing=0x20000000,
 476	DescIntr=0x10000000,
 477};
 478
 479#define PRIV_ALIGN	15  			/* Required alignment mask */
 480#define MII_CNT		4
 481struct hamachi_private {
 482	/* Descriptor rings first for alignment.  Tx requires a second descriptor
 483	   for status. */
 484	struct hamachi_desc *rx_ring;
 485	struct hamachi_desc *tx_ring;
 486	struct sk_buff* rx_skbuff[RX_RING_SIZE];
 487	struct sk_buff* tx_skbuff[TX_RING_SIZE];
 488	dma_addr_t tx_ring_dma;
 489	dma_addr_t rx_ring_dma;
 490	struct timer_list timer;		/* Media selection timer. */
 491	/* Frequently used and paired value: keep adjacent for cache effect. */
 492	spinlock_t lock;
 493	int chip_id;
 494	unsigned int cur_rx, dirty_rx;		/* Producer/consumer ring indices */
 495	unsigned int cur_tx, dirty_tx;
 496	unsigned int rx_buf_sz;			/* Based on MTU+slack. */
 497	unsigned int tx_full:1;			/* The Tx queue is full. */
 498	unsigned int duplex_lock:1;
 499	unsigned int default_port:4;		/* Last dev->if_port value. */
 500	/* MII transceiver section. */
 501	int mii_cnt;								/* MII device addresses. */
 502	struct mii_if_info mii_if;		/* MII lib hooks/info */
 503	unsigned char phys[MII_CNT];		/* MII device addresses, only first one used. */
 504	u32 rx_int_var, tx_int_var;	/* interrupt control variables */
 505	u32 option;							/* Hold on to a copy of the options */
 506	struct pci_dev *pci_dev;
 507	void __iomem *base;
 508};
 509
 510MODULE_AUTHOR("Donald Becker <becker@scyld.com>, Eric Kasten <kasten@nscl.msu.edu>, Keith Underwood <keithu@parl.clemson.edu>");
 511MODULE_DESCRIPTION("Packet Engines 'Hamachi' GNIC-II Gigabit Ethernet driver");
 512MODULE_LICENSE("GPL");
 513
 514module_param(max_interrupt_work, int, 0);
 515module_param(mtu, int, 0);
 516module_param(debug, int, 0);
 517module_param(min_rx_pkt, int, 0);
 518module_param(max_rx_gap, int, 0);
 519module_param(max_rx_latency, int, 0);
 520module_param(min_tx_pkt, int, 0);
 521module_param(max_tx_gap, int, 0);
 522module_param(max_tx_latency, int, 0);
 523module_param(rx_copybreak, int, 0);
 524module_param_array(rx_params, int, NULL, 0);
 525module_param_array(tx_params, int, NULL, 0);
 526module_param_array(options, int, NULL, 0);
 527module_param_array(full_duplex, int, NULL, 0);
 528module_param(force32, int, 0);
 529MODULE_PARM_DESC(max_interrupt_work, "GNIC-II maximum events handled per interrupt");
 530MODULE_PARM_DESC(mtu, "GNIC-II MTU (all boards)");
 531MODULE_PARM_DESC(debug, "GNIC-II debug level (0-7)");
 532MODULE_PARM_DESC(min_rx_pkt, "GNIC-II minimum Rx packets processed between interrupts");
 533MODULE_PARM_DESC(max_rx_gap, "GNIC-II maximum Rx inter-packet gap in 8.192 microsecond units");
 534MODULE_PARM_DESC(max_rx_latency, "GNIC-II time between Rx interrupts in 8.192 microsecond units");
 535MODULE_PARM_DESC(min_tx_pkt, "GNIC-II minimum Tx packets processed between interrupts");
 536MODULE_PARM_DESC(max_tx_gap, "GNIC-II maximum Tx inter-packet gap in 8.192 microsecond units");
 537MODULE_PARM_DESC(max_tx_latency, "GNIC-II time between Tx interrupts in 8.192 microsecond units");
 538MODULE_PARM_DESC(rx_copybreak, "GNIC-II copy breakpoint for copy-only-tiny-frames");
 539MODULE_PARM_DESC(rx_params, "GNIC-II min_rx_pkt+max_rx_gap+max_rx_latency");
 540MODULE_PARM_DESC(tx_params, "GNIC-II min_tx_pkt+max_tx_gap+max_tx_latency");
 541MODULE_PARM_DESC(options, "GNIC-II Bits 0-3: media type, bits 4-6: as force32, bit 7: half duplex, bit 9 full duplex");
 542MODULE_PARM_DESC(full_duplex, "GNIC-II full duplex setting(s) (1)");
 543MODULE_PARM_DESC(force32, "GNIC-II: Bit 0: 32 bit PCI, bit 1: disable parity, bit 2: 64 bit PCI (all boards)");
 544
 545static int read_eeprom(void __iomem *ioaddr, int location);
 546static int mdio_read(struct net_device *dev, int phy_id, int location);
 547static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
 548static int hamachi_open(struct net_device *dev);
 549static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 550static void hamachi_timer(unsigned long data);
 551static void hamachi_tx_timeout(struct net_device *dev);
 
 
 552static void hamachi_init_ring(struct net_device *dev);
 553static netdev_tx_t hamachi_start_xmit(struct sk_buff *skb,
 554				      struct net_device *dev);
 555static irqreturn_t hamachi_interrupt(int irq, void *dev_instance);
 556static int hamachi_rx(struct net_device *dev);
 557static inline int hamachi_tx(struct net_device *dev);
 558static void hamachi_error(struct net_device *dev, int intr_status);
 559static int hamachi_close(struct net_device *dev);
 560static struct net_device_stats *hamachi_get_stats(struct net_device *dev);
 561static void set_rx_mode(struct net_device *dev);
 562static const struct ethtool_ops ethtool_ops;
 563static const struct ethtool_ops ethtool_ops_no_mii;
 564
 565static const struct net_device_ops hamachi_netdev_ops = {
 566	.ndo_open		= hamachi_open,
 567	.ndo_stop		= hamachi_close,
 568	.ndo_start_xmit		= hamachi_start_xmit,
 569	.ndo_get_stats		= hamachi_get_stats,
 570	.ndo_set_rx_mode	= set_rx_mode,
 571	.ndo_change_mtu		= eth_change_mtu,
 572	.ndo_validate_addr	= eth_validate_addr,
 573	.ndo_set_mac_address 	= eth_mac_addr,
 574	.ndo_tx_timeout		= hamachi_tx_timeout,
 575	.ndo_do_ioctl		= netdev_ioctl,
 
 576};
 577
 578
 579static int hamachi_init_one(struct pci_dev *pdev,
 580			    const struct pci_device_id *ent)
 581{
 582	struct hamachi_private *hmp;
 583	int option, i, rx_int_var, tx_int_var, boguscnt;
 584	int chip_id = ent->driver_data;
 585	int irq;
 586	void __iomem *ioaddr;
 587	unsigned long base;
 588	static int card_idx;
 589	struct net_device *dev;
 590	void *ring_space;
 591	dma_addr_t ring_dma;
 592	int ret = -ENOMEM;
 
 593
 594/* when built into the kernel, we only print version if device is found */
 595#ifndef MODULE
 596	static int printed_version;
 597	if (!printed_version++)
 598		printk(version);
 599#endif
 600
 601	if (pci_enable_device(pdev)) {
 602		ret = -EIO;
 603		goto err_out;
 604	}
 605
 606	base = pci_resource_start(pdev, 0);
 607#ifdef __alpha__				/* Really "64 bit addrs" */
 608	base |= (pci_resource_start(pdev, 1) << 32);
 609#endif
 610
 611	pci_set_master(pdev);
 612
 613	i = pci_request_regions(pdev, DRV_NAME);
 614	if (i)
 615		return i;
 616
 617	irq = pdev->irq;
 618	ioaddr = ioremap(base, 0x400);
 619	if (!ioaddr)
 620		goto err_out_release;
 621
 622	dev = alloc_etherdev(sizeof(struct hamachi_private));
 623	if (!dev)
 624		goto err_out_iounmap;
 625
 626	SET_NETDEV_DEV(dev, &pdev->dev);
 627
 628	for (i = 0; i < 6; i++)
 629		dev->dev_addr[i] = 1 ? read_eeprom(ioaddr, 4 + i)
 630			: readb(ioaddr + StationAddr + i);
 631
 632#if ! defined(final_version)
 633	if (hamachi_debug > 4)
 634		for (i = 0; i < 0x10; i++)
 635			printk("%2.2x%s",
 636				   read_eeprom(ioaddr, i), i % 16 != 15 ? " " : "\n");
 637#endif
 638
 639	hmp = netdev_priv(dev);
 640	spin_lock_init(&hmp->lock);
 641
 642	hmp->mii_if.dev = dev;
 643	hmp->mii_if.mdio_read = mdio_read;
 644	hmp->mii_if.mdio_write = mdio_write;
 645	hmp->mii_if.phy_id_mask = 0x1f;
 646	hmp->mii_if.reg_num_mask = 0x1f;
 647
 648	ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
 
 649	if (!ring_space)
 650		goto err_out_cleardev;
 651	hmp->tx_ring = ring_space;
 652	hmp->tx_ring_dma = ring_dma;
 653
 654	ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
 
 655	if (!ring_space)
 656		goto err_out_unmap_tx;
 657	hmp->rx_ring = ring_space;
 658	hmp->rx_ring_dma = ring_dma;
 659
 660	/* Check for options being passed in */
 661	option = card_idx < MAX_UNITS ? options[card_idx] : 0;
 662	if (dev->mem_start)
 663		option = dev->mem_start;
 664
 665	/* If the bus size is misidentified, do the following. */
 666	force32 = force32 ? force32 :
 667		((option  >= 0) ? ((option & 0x00000070) >> 4) : 0 );
 668	if (force32)
 669		writeb(force32, ioaddr + VirtualJumpers);
 670
 671	/* Hmmm, do we really need to reset the chip???. */
 672	writeb(0x01, ioaddr + ChipReset);
 673
 674	/* After a reset, the clock speed measurement of the PCI bus will not
 675	 * be valid for a moment.  Wait for a little while until it is.  If
 676	 * it takes more than 10ms, forget it.
 677	 */
 678	udelay(10);
 679	i = readb(ioaddr + PCIClkMeas);
 680	for (boguscnt = 0; (!(i & 0x080)) && boguscnt < 1000; boguscnt++){
 681		udelay(10);
 682		i = readb(ioaddr + PCIClkMeas);
 683	}
 684
 685	hmp->base = ioaddr;
 686	pci_set_drvdata(pdev, dev);
 687
 688	hmp->chip_id = chip_id;
 689	hmp->pci_dev = pdev;
 690
 691	/* The lower four bits are the media type. */
 692	if (option > 0) {
 693		hmp->option = option;
 694		if (option & 0x200)
 695			hmp->mii_if.full_duplex = 1;
 696		else if (option & 0x080)
 697			hmp->mii_if.full_duplex = 0;
 698		hmp->default_port = option & 15;
 699		if (hmp->default_port)
 700			hmp->mii_if.force_media = 1;
 701	}
 702	if (card_idx < MAX_UNITS  &&  full_duplex[card_idx] > 0)
 703		hmp->mii_if.full_duplex = 1;
 704
 705	/* lock the duplex mode if someone specified a value */
 706	if (hmp->mii_if.full_duplex || (option & 0x080))
 707		hmp->duplex_lock = 1;
 708
 709	/* Set interrupt tuning parameters */
 710	max_rx_latency = max_rx_latency & 0x00ff;
 711	max_rx_gap = max_rx_gap & 0x00ff;
 712	min_rx_pkt = min_rx_pkt & 0x00ff;
 713	max_tx_latency = max_tx_latency & 0x00ff;
 714	max_tx_gap = max_tx_gap & 0x00ff;
 715	min_tx_pkt = min_tx_pkt & 0x00ff;
 716
 717	rx_int_var = card_idx < MAX_UNITS ? rx_params[card_idx] : -1;
 718	tx_int_var = card_idx < MAX_UNITS ? tx_params[card_idx] : -1;
 719	hmp->rx_int_var = rx_int_var >= 0 ? rx_int_var :
 720		(min_rx_pkt << 16 | max_rx_gap << 8 | max_rx_latency);
 721	hmp->tx_int_var = tx_int_var >= 0 ? tx_int_var :
 722		(min_tx_pkt << 16 | max_tx_gap << 8 | max_tx_latency);
 723
 724
 725	/* The Hamachi-specific entries in the device structure. */
 726	dev->netdev_ops = &hamachi_netdev_ops;
 727	if (chip_tbl[hmp->chip_id].flags & CanHaveMII)
 728		SET_ETHTOOL_OPS(dev, &ethtool_ops);
 729	else
 730		SET_ETHTOOL_OPS(dev, &ethtool_ops_no_mii);
 731	dev->watchdog_timeo = TX_TIMEOUT;
 732	if (mtu)
 733		dev->mtu = mtu;
 734
 735	i = register_netdev(dev);
 736	if (i) {
 737		ret = i;
 738		goto err_out_unmap_rx;
 739	}
 740
 741	printk(KERN_INFO "%s: %s type %x at %p, %pM, IRQ %d.\n",
 742		   dev->name, chip_tbl[chip_id].name, readl(ioaddr + ChipRev),
 743		   ioaddr, dev->dev_addr, irq);
 744	i = readb(ioaddr + PCIClkMeas);
 745	printk(KERN_INFO "%s:  %d-bit %d Mhz PCI bus (%d), Virtual Jumpers "
 746		   "%2.2x, LPA %4.4x.\n",
 747		   dev->name, readw(ioaddr + MiscStatus) & 1 ? 64 : 32,
 748		   i ? 2000/(i&0x7f) : 0, i&0x7f, (int)readb(ioaddr + VirtualJumpers),
 749		   readw(ioaddr + ANLinkPartnerAbility));
 750
 751	if (chip_tbl[hmp->chip_id].flags & CanHaveMII) {
 752		int phy, phy_idx = 0;
 753		for (phy = 0; phy < 32 && phy_idx < MII_CNT; phy++) {
 754			int mii_status = mdio_read(dev, phy, MII_BMSR);
 755			if (mii_status != 0xffff  &&
 756				mii_status != 0x0000) {
 757				hmp->phys[phy_idx++] = phy;
 758				hmp->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
 759				printk(KERN_INFO "%s: MII PHY found at address %d, status "
 760					   "0x%4.4x advertising %4.4x.\n",
 761					   dev->name, phy, mii_status, hmp->mii_if.advertising);
 762			}
 763		}
 764		hmp->mii_cnt = phy_idx;
 765		if (hmp->mii_cnt > 0)
 766			hmp->mii_if.phy_id = hmp->phys[0];
 767		else
 768			memset(&hmp->mii_if, 0, sizeof(hmp->mii_if));
 769	}
 770	/* Configure gigabit autonegotiation. */
 771	writew(0x0400, ioaddr + ANXchngCtrl);	/* Enable legacy links. */
 772	writew(0x08e0, ioaddr + ANAdvertise);	/* Set our advertise word. */
 773	writew(0x1000, ioaddr + ANCtrl);			/* Enable negotiation */
 774
 775	card_idx++;
 776	return 0;
 777
 778err_out_unmap_rx:
 779	pci_free_consistent(pdev, RX_TOTAL_SIZE, hmp->rx_ring,
 780		hmp->rx_ring_dma);
 781err_out_unmap_tx:
 782	pci_free_consistent(pdev, TX_TOTAL_SIZE, hmp->tx_ring,
 783		hmp->tx_ring_dma);
 784err_out_cleardev:
 785	free_netdev (dev);
 786err_out_iounmap:
 787	iounmap(ioaddr);
 788err_out_release:
 789	pci_release_regions(pdev);
 790err_out:
 791	return ret;
 792}
 793
 794static int read_eeprom(void __iomem *ioaddr, int location)
 795{
 796	int bogus_cnt = 1000;
 797
 798	/* We should check busy first - per docs -KDU */
 799	while ((readb(ioaddr + EECmdStatus) & 0x40)  && --bogus_cnt > 0);
 800	writew(location, ioaddr + EEAddr);
 801	writeb(0x02, ioaddr + EECmdStatus);
 802	bogus_cnt = 1000;
 803	while ((readb(ioaddr + EECmdStatus) & 0x40)  && --bogus_cnt > 0);
 804	if (hamachi_debug > 5)
 805		printk("   EEPROM status is %2.2x after %d ticks.\n",
 806			   (int)readb(ioaddr + EECmdStatus), 1000- bogus_cnt);
 807	return readb(ioaddr + EEData);
 808}
 809
 810/* MII Managemen Data I/O accesses.
 811   These routines assume the MDIO controller is idle, and do not exit until
 812   the command is finished. */
 813
 814static int mdio_read(struct net_device *dev, int phy_id, int location)
 815{
 816	struct hamachi_private *hmp = netdev_priv(dev);
 817	void __iomem *ioaddr = hmp->base;
 818	int i;
 819
 820	/* We should check busy first - per docs -KDU */
 821	for (i = 10000; i >= 0; i--)
 822		if ((readw(ioaddr + MII_Status) & 1) == 0)
 823			break;
 824	writew((phy_id<<8) + location, ioaddr + MII_Addr);
 825	writew(0x0001, ioaddr + MII_Cmd);
 826	for (i = 10000; i >= 0; i--)
 827		if ((readw(ioaddr + MII_Status) & 1) == 0)
 828			break;
 829	return readw(ioaddr + MII_Rd_Data);
 830}
 831
 832static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
 833{
 834	struct hamachi_private *hmp = netdev_priv(dev);
 835	void __iomem *ioaddr = hmp->base;
 836	int i;
 837
 838	/* We should check busy first - per docs -KDU */
 839	for (i = 10000; i >= 0; i--)
 840		if ((readw(ioaddr + MII_Status) & 1) == 0)
 841			break;
 842	writew((phy_id<<8) + location, ioaddr + MII_Addr);
 843	writew(value, ioaddr + MII_Wr_Data);
 844
 845	/* Wait for the command to finish. */
 846	for (i = 10000; i >= 0; i--)
 847		if ((readw(ioaddr + MII_Status) & 1) == 0)
 848			break;
 849}
 850
 851
 852static int hamachi_open(struct net_device *dev)
 853{
 854	struct hamachi_private *hmp = netdev_priv(dev);
 855	void __iomem *ioaddr = hmp->base;
 856	int i;
 857	u32 rx_int_var, tx_int_var;
 858	u16 fifo_info;
 859
 860	i = request_irq(hmp->pci_dev->irq, hamachi_interrupt, IRQF_SHARED,
 861			dev->name, dev);
 862	if (i)
 863		return i;
 864
 865	hamachi_init_ring(dev);
 866
 867#if ADDRLEN == 64
 868	/* writellll anyone ? */
 869	writel(hmp->rx_ring_dma, ioaddr + RxPtr);
 870	writel(hmp->rx_ring_dma >> 32, ioaddr + RxPtr + 4);
 871	writel(hmp->tx_ring_dma, ioaddr + TxPtr);
 872	writel(hmp->tx_ring_dma >> 32, ioaddr + TxPtr + 4);
 873#else
 874	writel(hmp->rx_ring_dma, ioaddr + RxPtr);
 875	writel(hmp->tx_ring_dma, ioaddr + TxPtr);
 876#endif
 877
 878	/* TODO:  It would make sense to organize this as words since the card
 879	 * documentation does. -KDU
 880	 */
 881	for (i = 0; i < 6; i++)
 882		writeb(dev->dev_addr[i], ioaddr + StationAddr + i);
 883
 884	/* Initialize other registers: with so many this eventually this will
 885	   converted to an offset/value list. */
 886
 887	/* Configure the FIFO */
 888	fifo_info = (readw(ioaddr + GPIO) & 0x00C0) >> 6;
 889	switch (fifo_info){
 890		case 0 :
 891			/* No FIFO */
 892			writew(0x0000, ioaddr + FIFOcfg);
 893			break;
 894		case 1 :
 895			/* Configure the FIFO for 512K external, 16K used for Tx. */
 896			writew(0x0028, ioaddr + FIFOcfg);
 897			break;
 898		case 2 :
 899			/* Configure the FIFO for 1024 external, 32K used for Tx. */
 900			writew(0x004C, ioaddr + FIFOcfg);
 901			break;
 902		case 3 :
 903			/* Configure the FIFO for 2048 external, 32K used for Tx. */
 904			writew(0x006C, ioaddr + FIFOcfg);
 905			break;
 906		default :
 907			printk(KERN_WARNING "%s:  Unsupported external memory config!\n",
 908				dev->name);
 909			/* Default to no FIFO */
 910			writew(0x0000, ioaddr + FIFOcfg);
 911			break;
 912	}
 913
 914	if (dev->if_port == 0)
 915		dev->if_port = hmp->default_port;
 916
 917
 918	/* Setting the Rx mode will start the Rx process. */
 919	/* If someone didn't choose a duplex, default to full-duplex */
 920	if (hmp->duplex_lock != 1)
 921		hmp->mii_if.full_duplex = 1;
 922
 923	/* always 1, takes no more time to do it */
 924	writew(0x0001, ioaddr + RxChecksum);
 925	writew(0x0000, ioaddr + TxChecksum);
 926	writew(0x8000, ioaddr + MACCnfg); /* Soft reset the MAC */
 927	writew(0x215F, ioaddr + MACCnfg);
 928	writew(0x000C, ioaddr + FrameGap0);
 929	/* WHAT?!?!?  Why isn't this documented somewhere? -KDU */
 930	writew(0x1018, ioaddr + FrameGap1);
 931	/* Why do we enable receives/transmits here? -KDU */
 932	writew(0x0780, ioaddr + MACCnfg2); /* Upper 16 bits control LEDs. */
 933	/* Enable automatic generation of flow control frames, period 0xffff. */
 934	writel(0x0030FFFF, ioaddr + FlowCtrl);
 935	writew(MAX_FRAME_SIZE, ioaddr + MaxFrameSize); 	/* dev->mtu+14 ??? */
 936
 937	/* Enable legacy links. */
 938	writew(0x0400, ioaddr + ANXchngCtrl);	/* Enable legacy links. */
 939	/* Initial Link LED to blinking red. */
 940	writeb(0x03, ioaddr + LEDCtrl);
 941
 942	/* Configure interrupt mitigation.  This has a great effect on
 943	   performance, so systems tuning should start here!. */
 944
 945	rx_int_var = hmp->rx_int_var;
 946	tx_int_var = hmp->tx_int_var;
 947
 948	if (hamachi_debug > 1) {
 949		printk("max_tx_latency: %d, max_tx_gap: %d, min_tx_pkt: %d\n",
 950			tx_int_var & 0x00ff, (tx_int_var & 0x00ff00) >> 8,
 951			(tx_int_var & 0x00ff0000) >> 16);
 952		printk("max_rx_latency: %d, max_rx_gap: %d, min_rx_pkt: %d\n",
 953			rx_int_var & 0x00ff, (rx_int_var & 0x00ff00) >> 8,
 954			(rx_int_var & 0x00ff0000) >> 16);
 955		printk("rx_int_var: %x, tx_int_var: %x\n", rx_int_var, tx_int_var);
 956	}
 957
 958	writel(tx_int_var, ioaddr + TxIntrCtrl);
 959	writel(rx_int_var, ioaddr + RxIntrCtrl);
 960
 961	set_rx_mode(dev);
 962
 963	netif_start_queue(dev);
 964
 965	/* Enable interrupts by setting the interrupt mask. */
 966	writel(0x80878787, ioaddr + InterruptEnable);
 967	writew(0x0000, ioaddr + EventStatus);	/* Clear non-interrupting events */
 968
 969	/* Configure and start the DMA channels. */
 970	/* Burst sizes are in the low three bits: size = 4<<(val&7) */
 971#if ADDRLEN == 64
 972	writew(0x005D, ioaddr + RxDMACtrl); 		/* 128 dword bursts */
 973	writew(0x005D, ioaddr + TxDMACtrl);
 974#else
 975	writew(0x001D, ioaddr + RxDMACtrl);
 976	writew(0x001D, ioaddr + TxDMACtrl);
 977#endif
 978	writew(0x0001, ioaddr + RxCmd);
 979
 980	if (hamachi_debug > 2) {
 981		printk(KERN_DEBUG "%s: Done hamachi_open(), status: Rx %x Tx %x.\n",
 982			   dev->name, readw(ioaddr + RxStatus), readw(ioaddr + TxStatus));
 983	}
 984	/* Set the timer to check for link beat. */
 985	init_timer(&hmp->timer);
 986	hmp->timer.expires = RUN_AT((24*HZ)/10);			/* 2.4 sec. */
 987	hmp->timer.data = (unsigned long)dev;
 988	hmp->timer.function = hamachi_timer;				/* timer handler */
 989	add_timer(&hmp->timer);
 990
 991	return 0;
 992}
 993
 994static inline int hamachi_tx(struct net_device *dev)
 995{
 996	struct hamachi_private *hmp = netdev_priv(dev);
 997
 998	/* Update the dirty pointer until we find an entry that is
 999		still owned by the card */
1000	for (; hmp->cur_tx - hmp->dirty_tx > 0; hmp->dirty_tx++) {
1001		int entry = hmp->dirty_tx % TX_RING_SIZE;
1002		struct sk_buff *skb;
1003
1004		if (hmp->tx_ring[entry].status_n_length & cpu_to_le32(DescOwn))
1005			break;
1006		/* Free the original skb. */
1007		skb = hmp->tx_skbuff[entry];
1008		if (skb) {
1009			pci_unmap_single(hmp->pci_dev,
1010				leXX_to_cpu(hmp->tx_ring[entry].addr),
1011				skb->len, PCI_DMA_TODEVICE);
1012			dev_kfree_skb(skb);
1013			hmp->tx_skbuff[entry] = NULL;
1014		}
1015		hmp->tx_ring[entry].status_n_length = 0;
1016		if (entry >= TX_RING_SIZE-1)
1017			hmp->tx_ring[TX_RING_SIZE-1].status_n_length |=
1018				cpu_to_le32(DescEndRing);
1019		dev->stats.tx_packets++;
1020	}
1021
1022	return 0;
1023}
1024
1025static void hamachi_timer(unsigned long data)
1026{
1027	struct net_device *dev = (struct net_device *)data;
1028	struct hamachi_private *hmp = netdev_priv(dev);
1029	void __iomem *ioaddr = hmp->base;
1030	int next_tick = 10*HZ;
1031
1032	if (hamachi_debug > 2) {
1033		printk(KERN_INFO "%s: Hamachi Autonegotiation status %4.4x, LPA "
1034			   "%4.4x.\n", dev->name, readw(ioaddr + ANStatus),
1035			   readw(ioaddr + ANLinkPartnerAbility));
1036		printk(KERN_INFO "%s: Autonegotiation regs %4.4x %4.4x %4.4x "
1037		       "%4.4x %4.4x %4.4x.\n", dev->name,
1038		       readw(ioaddr + 0x0e0),
1039		       readw(ioaddr + 0x0e2),
1040		       readw(ioaddr + 0x0e4),
1041		       readw(ioaddr + 0x0e6),
1042		       readw(ioaddr + 0x0e8),
1043		       readw(ioaddr + 0x0eA));
1044	}
1045	/* We could do something here... nah. */
1046	hmp->timer.expires = RUN_AT(next_tick);
1047	add_timer(&hmp->timer);
1048}
1049
1050static void hamachi_tx_timeout(struct net_device *dev)
1051{
1052	int i;
1053	struct hamachi_private *hmp = netdev_priv(dev);
1054	void __iomem *ioaddr = hmp->base;
1055
1056	printk(KERN_WARNING "%s: Hamachi transmit timed out, status %8.8x,"
1057		   " resetting...\n", dev->name, (int)readw(ioaddr + TxStatus));
1058
1059	{
1060		printk(KERN_DEBUG "  Rx ring %p: ", hmp->rx_ring);
1061		for (i = 0; i < RX_RING_SIZE; i++)
1062			printk(KERN_CONT " %8.8x",
1063			       le32_to_cpu(hmp->rx_ring[i].status_n_length));
1064		printk(KERN_CONT "\n");
1065		printk(KERN_DEBUG"  Tx ring %p: ", hmp->tx_ring);
1066		for (i = 0; i < TX_RING_SIZE; i++)
1067			printk(KERN_CONT " %4.4x",
1068			       le32_to_cpu(hmp->tx_ring[i].status_n_length));
1069		printk(KERN_CONT "\n");
1070	}
1071
1072	/* Reinit the hardware and make sure the Rx and Tx processes
1073		are up and running.
1074	 */
1075	dev->if_port = 0;
1076	/* The right way to do Reset. -KDU
1077	 *		-Clear OWN bit in all Rx/Tx descriptors
1078	 *		-Wait 50 uS for channels to go idle
1079	 *		-Turn off MAC receiver
1080	 *		-Issue Reset
1081	 */
1082
1083	for (i = 0; i < RX_RING_SIZE; i++)
1084		hmp->rx_ring[i].status_n_length &= cpu_to_le32(~DescOwn);
1085
1086	/* Presume that all packets in the Tx queue are gone if we have to
1087	 * re-init the hardware.
1088	 */
1089	for (i = 0; i < TX_RING_SIZE; i++){
1090		struct sk_buff *skb;
1091
1092		if (i >= TX_RING_SIZE - 1)
1093			hmp->tx_ring[i].status_n_length =
1094				cpu_to_le32(DescEndRing) |
1095				(hmp->tx_ring[i].status_n_length &
1096				 cpu_to_le32(0x0000ffff));
1097		else
1098			hmp->tx_ring[i].status_n_length &= cpu_to_le32(0x0000ffff);
1099		skb = hmp->tx_skbuff[i];
1100		if (skb){
1101			pci_unmap_single(hmp->pci_dev, leXX_to_cpu(hmp->tx_ring[i].addr),
1102				skb->len, PCI_DMA_TODEVICE);
 
1103			dev_kfree_skb(skb);
1104			hmp->tx_skbuff[i] = NULL;
1105		}
1106	}
1107
1108	udelay(60); /* Sleep 60 us just for safety sake */
1109	writew(0x0002, ioaddr + RxCmd); /* STOP Rx */
1110
1111	writeb(0x01, ioaddr + ChipReset);  /* Reinit the hardware */
1112
1113	hmp->tx_full = 0;
1114	hmp->cur_rx = hmp->cur_tx = 0;
1115	hmp->dirty_rx = hmp->dirty_tx = 0;
1116	/* Rx packets are also presumed lost; however, we need to make sure a
1117	 * ring of buffers is in tact. -KDU
1118	 */
1119	for (i = 0; i < RX_RING_SIZE; i++){
1120		struct sk_buff *skb = hmp->rx_skbuff[i];
1121
1122		if (skb){
1123			pci_unmap_single(hmp->pci_dev,
1124				leXX_to_cpu(hmp->rx_ring[i].addr),
1125				hmp->rx_buf_sz, PCI_DMA_FROMDEVICE);
1126			dev_kfree_skb(skb);
1127			hmp->rx_skbuff[i] = NULL;
1128		}
1129	}
1130	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
1131	for (i = 0; i < RX_RING_SIZE; i++) {
1132		struct sk_buff *skb;
1133
1134		skb = netdev_alloc_skb_ip_align(dev, hmp->rx_buf_sz);
1135		hmp->rx_skbuff[i] = skb;
1136		if (skb == NULL)
1137			break;
1138
1139                hmp->rx_ring[i].addr = cpu_to_leXX(pci_map_single(hmp->pci_dev,
1140			skb->data, hmp->rx_buf_sz, PCI_DMA_FROMDEVICE));
 
 
1141		hmp->rx_ring[i].status_n_length = cpu_to_le32(DescOwn |
1142			DescEndPacket | DescIntr | (hmp->rx_buf_sz - 2));
1143	}
1144	hmp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
1145	/* Mark the last entry as wrapping the ring. */
1146	hmp->rx_ring[RX_RING_SIZE-1].status_n_length |= cpu_to_le32(DescEndRing);
1147
1148	/* Trigger an immediate transmit demand. */
1149	dev->trans_start = jiffies; /* prevent tx timeout */
1150	dev->stats.tx_errors++;
1151
1152	/* Restart the chip's Tx/Rx processes . */
1153	writew(0x0002, ioaddr + TxCmd); /* STOP Tx */
1154	writew(0x0001, ioaddr + TxCmd); /* START Tx */
1155	writew(0x0001, ioaddr + RxCmd); /* START Rx */
1156
1157	netif_wake_queue(dev);
1158}
1159
1160
1161/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
1162static void hamachi_init_ring(struct net_device *dev)
1163{
1164	struct hamachi_private *hmp = netdev_priv(dev);
1165	int i;
1166
1167	hmp->tx_full = 0;
1168	hmp->cur_rx = hmp->cur_tx = 0;
1169	hmp->dirty_rx = hmp->dirty_tx = 0;
1170
1171	/* +26 gets the maximum ethernet encapsulation, +7 & ~7 because the
1172	 * card needs room to do 8 byte alignment, +2 so we can reserve
1173	 * the first 2 bytes, and +16 gets room for the status word from the
1174	 * card.  -KDU
1175	 */
1176	hmp->rx_buf_sz = (dev->mtu <= 1492 ? PKT_BUF_SZ :
1177		(((dev->mtu+26+7) & ~7) + 16));
1178
1179	/* Initialize all Rx descriptors. */
1180	for (i = 0; i < RX_RING_SIZE; i++) {
1181		hmp->rx_ring[i].status_n_length = 0;
1182		hmp->rx_skbuff[i] = NULL;
1183	}
1184	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
1185	for (i = 0; i < RX_RING_SIZE; i++) {
1186		struct sk_buff *skb = netdev_alloc_skb(dev, hmp->rx_buf_sz + 2);
1187		hmp->rx_skbuff[i] = skb;
1188		if (skb == NULL)
1189			break;
1190		skb_reserve(skb, 2); /* 16 byte align the IP header. */
1191                hmp->rx_ring[i].addr = cpu_to_leXX(pci_map_single(hmp->pci_dev,
1192			skb->data, hmp->rx_buf_sz, PCI_DMA_FROMDEVICE));
 
 
1193		/* -2 because it doesn't REALLY have that first 2 bytes -KDU */
1194		hmp->rx_ring[i].status_n_length = cpu_to_le32(DescOwn |
1195			DescEndPacket | DescIntr | (hmp->rx_buf_sz -2));
1196	}
1197	hmp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
1198	hmp->rx_ring[RX_RING_SIZE-1].status_n_length |= cpu_to_le32(DescEndRing);
1199
1200	for (i = 0; i < TX_RING_SIZE; i++) {
1201		hmp->tx_skbuff[i] = NULL;
1202		hmp->tx_ring[i].status_n_length = 0;
1203	}
1204	/* Mark the last entry of the ring */
1205	hmp->tx_ring[TX_RING_SIZE-1].status_n_length |= cpu_to_le32(DescEndRing);
1206}
1207
1208
1209static netdev_tx_t hamachi_start_xmit(struct sk_buff *skb,
1210				      struct net_device *dev)
1211{
1212	struct hamachi_private *hmp = netdev_priv(dev);
1213	unsigned entry;
1214	u16 status;
1215
1216	/* Ok, now make sure that the queue has space before trying to
1217		add another skbuff.  if we return non-zero the scheduler
1218		should interpret this as a queue full and requeue the buffer
1219		for later.
1220	 */
1221	if (hmp->tx_full) {
1222		/* We should NEVER reach this point -KDU */
1223		printk(KERN_WARNING "%s: Hamachi transmit queue full at slot %d.\n",dev->name, hmp->cur_tx);
1224
1225		/* Wake the potentially-idle transmit channel. */
1226		/* If we don't need to read status, DON'T -KDU */
1227		status=readw(hmp->base + TxStatus);
1228		if( !(status & 0x0001) || (status & 0x0002))
1229			writew(0x0001, hmp->base + TxCmd);
1230		return NETDEV_TX_BUSY;
1231	}
1232
1233	/* Caution: the write order is important here, set the field
1234	   with the "ownership" bits last. */
1235
1236	/* Calculate the next Tx descriptor entry. */
1237	entry = hmp->cur_tx % TX_RING_SIZE;
1238
1239	hmp->tx_skbuff[entry] = skb;
1240
1241        hmp->tx_ring[entry].addr = cpu_to_leXX(pci_map_single(hmp->pci_dev,
1242		skb->data, skb->len, PCI_DMA_TODEVICE));
 
 
1243
1244	/* Hmmmm, could probably put a DescIntr on these, but the way
1245		the driver is currently coded makes Tx interrupts unnecessary
1246		since the clearing of the Tx ring is handled by the start_xmit
1247		routine.  This organization helps mitigate the interrupts a
1248		bit and probably renders the max_tx_latency param useless.
1249
1250		Update: Putting a DescIntr bit on all of the descriptors and
1251		mitigating interrupt frequency with the tx_min_pkt parameter. -KDU
1252	*/
1253	if (entry >= TX_RING_SIZE-1)		 /* Wrap ring */
1254		hmp->tx_ring[entry].status_n_length = cpu_to_le32(DescOwn |
1255			DescEndPacket | DescEndRing | DescIntr | skb->len);
1256	else
1257		hmp->tx_ring[entry].status_n_length = cpu_to_le32(DescOwn |
1258			DescEndPacket | DescIntr | skb->len);
1259	hmp->cur_tx++;
1260
1261	/* Non-x86 Todo: explicitly flush cache lines here. */
1262
1263	/* Wake the potentially-idle transmit channel. */
1264	/* If we don't need to read status, DON'T -KDU */
1265	status=readw(hmp->base + TxStatus);
1266	if( !(status & 0x0001) || (status & 0x0002))
1267		writew(0x0001, hmp->base + TxCmd);
1268
1269	/* Immediately before returning, let's clear as many entries as we can. */
1270	hamachi_tx(dev);
1271
1272	/* We should kick the bottom half here, since we are not accepting
1273	 * interrupts with every packet.  i.e. realize that Gigabit ethernet
1274	 * can transmit faster than ordinary machines can load packets;
1275	 * hence, any packet that got put off because we were in the transmit
1276	 * routine should IMMEDIATELY get a chance to be re-queued. -KDU
1277	 */
1278	if ((hmp->cur_tx - hmp->dirty_tx) < (TX_RING_SIZE - 4))
1279		netif_wake_queue(dev);  /* Typical path */
1280	else {
1281		hmp->tx_full = 1;
1282		netif_stop_queue(dev);
1283	}
1284
1285	if (hamachi_debug > 4) {
1286		printk(KERN_DEBUG "%s: Hamachi transmit frame #%d queued in slot %d.\n",
1287			   dev->name, hmp->cur_tx, entry);
1288	}
1289	return NETDEV_TX_OK;
1290}
1291
1292/* The interrupt handler does all of the Rx thread work and cleans up
1293   after the Tx thread. */
1294static irqreturn_t hamachi_interrupt(int irq, void *dev_instance)
1295{
1296	struct net_device *dev = dev_instance;
1297	struct hamachi_private *hmp = netdev_priv(dev);
1298	void __iomem *ioaddr = hmp->base;
1299	long boguscnt = max_interrupt_work;
1300	int handled = 0;
1301
1302#ifndef final_version			/* Can never occur. */
1303	if (dev == NULL) {
1304		printk (KERN_ERR "hamachi_interrupt(): irq %d for unknown device.\n", irq);
1305		return IRQ_NONE;
1306	}
1307#endif
1308
1309	spin_lock(&hmp->lock);
1310
1311	do {
1312		u32 intr_status = readl(ioaddr + InterruptClear);
1313
1314		if (hamachi_debug > 4)
1315			printk(KERN_DEBUG "%s: Hamachi interrupt, status %4.4x.\n",
1316				   dev->name, intr_status);
1317
1318		if (intr_status == 0)
1319			break;
1320
1321		handled = 1;
1322
1323		if (intr_status & IntrRxDone)
1324			hamachi_rx(dev);
1325
1326		if (intr_status & IntrTxDone){
1327			/* This code should RARELY need to execute. After all, this is
1328			 * a gigabit link, it should consume packets as fast as we put
1329			 * them in AND we clear the Tx ring in hamachi_start_xmit().
1330			 */
1331			if (hmp->tx_full){
1332				for (; hmp->cur_tx - hmp->dirty_tx > 0; hmp->dirty_tx++){
1333					int entry = hmp->dirty_tx % TX_RING_SIZE;
1334					struct sk_buff *skb;
1335
1336					if (hmp->tx_ring[entry].status_n_length & cpu_to_le32(DescOwn))
1337						break;
1338					skb = hmp->tx_skbuff[entry];
1339					/* Free the original skb. */
1340					if (skb){
1341						pci_unmap_single(hmp->pci_dev,
1342							leXX_to_cpu(hmp->tx_ring[entry].addr),
1343							skb->len,
1344							PCI_DMA_TODEVICE);
1345						dev_kfree_skb_irq(skb);
1346						hmp->tx_skbuff[entry] = NULL;
1347					}
1348					hmp->tx_ring[entry].status_n_length = 0;
1349					if (entry >= TX_RING_SIZE-1)
1350						hmp->tx_ring[TX_RING_SIZE-1].status_n_length |=
1351							cpu_to_le32(DescEndRing);
1352					dev->stats.tx_packets++;
1353				}
1354				if (hmp->cur_tx - hmp->dirty_tx < TX_RING_SIZE - 4){
1355					/* The ring is no longer full */
1356					hmp->tx_full = 0;
1357					netif_wake_queue(dev);
1358				}
1359			} else {
1360				netif_wake_queue(dev);
1361			}
1362		}
1363
1364
1365		/* Abnormal error summary/uncommon events handlers. */
1366		if (intr_status &
1367			(IntrTxPCIFault | IntrTxPCIErr | IntrRxPCIFault | IntrRxPCIErr |
1368			 LinkChange | NegotiationChange | StatsMax))
1369			hamachi_error(dev, intr_status);
1370
1371		if (--boguscnt < 0) {
1372			printk(KERN_WARNING "%s: Too much work at interrupt, status=0x%4.4x.\n",
1373				   dev->name, intr_status);
1374			break;
1375		}
1376	} while (1);
1377
1378	if (hamachi_debug > 3)
1379		printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
1380			   dev->name, readl(ioaddr + IntrStatus));
1381
1382#ifndef final_version
1383	/* Code that should never be run!  Perhaps remove after testing.. */
1384	{
1385		static int stopit = 10;
1386		if (dev->start == 0  &&  --stopit < 0) {
1387			printk(KERN_ERR "%s: Emergency stop, looping startup interrupt.\n",
1388				   dev->name);
1389			free_irq(irq, dev);
1390		}
1391	}
1392#endif
1393
1394	spin_unlock(&hmp->lock);
1395	return IRQ_RETVAL(handled);
1396}
1397
1398/* This routine is logically part of the interrupt handler, but separated
1399   for clarity and better register allocation. */
1400static int hamachi_rx(struct net_device *dev)
1401{
1402	struct hamachi_private *hmp = netdev_priv(dev);
1403	int entry = hmp->cur_rx % RX_RING_SIZE;
1404	int boguscnt = (hmp->dirty_rx + RX_RING_SIZE) - hmp->cur_rx;
1405
1406	if (hamachi_debug > 4) {
1407		printk(KERN_DEBUG " In hamachi_rx(), entry %d status %4.4x.\n",
1408			   entry, hmp->rx_ring[entry].status_n_length);
1409	}
1410
1411	/* If EOP is set on the next entry, it's a new packet. Send it up. */
1412	while (1) {
1413		struct hamachi_desc *desc = &(hmp->rx_ring[entry]);
1414		u32 desc_status = le32_to_cpu(desc->status_n_length);
1415		u16 data_size = desc_status;	/* Implicit truncate */
1416		u8 *buf_addr;
1417		s32 frame_status;
1418
1419		if (desc_status & DescOwn)
1420			break;
1421		pci_dma_sync_single_for_cpu(hmp->pci_dev,
1422					    leXX_to_cpu(desc->addr),
1423					    hmp->rx_buf_sz,
1424					    PCI_DMA_FROMDEVICE);
1425		buf_addr = (u8 *) hmp->rx_skbuff[entry]->data;
1426		frame_status = get_unaligned_le32(&(buf_addr[data_size - 12]));
1427		if (hamachi_debug > 4)
1428			printk(KERN_DEBUG "  hamachi_rx() status was %8.8x.\n",
1429				frame_status);
1430		if (--boguscnt < 0)
1431			break;
1432		if ( ! (desc_status & DescEndPacket)) {
1433			printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
1434				   "multiple buffers, entry %#x length %d status %4.4x!\n",
1435				   dev->name, hmp->cur_rx, data_size, desc_status);
1436			printk(KERN_WARNING "%s: Oversized Ethernet frame %p vs %p.\n",
1437				   dev->name, desc, &hmp->rx_ring[hmp->cur_rx % RX_RING_SIZE]);
1438			printk(KERN_WARNING "%s: Oversized Ethernet frame -- next status %x/%x last status %x.\n",
1439				   dev->name,
1440				   le32_to_cpu(hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length) & 0xffff0000,
1441				   le32_to_cpu(hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length) & 0x0000ffff,
1442				   le32_to_cpu(hmp->rx_ring[(hmp->cur_rx-1) % RX_RING_SIZE].status_n_length));
1443			dev->stats.rx_length_errors++;
1444		} /* else  Omit for prototype errata??? */
1445		if (frame_status & 0x00380000) {
1446			/* There was an error. */
1447			if (hamachi_debug > 2)
1448				printk(KERN_DEBUG "  hamachi_rx() Rx error was %8.8x.\n",
1449					   frame_status);
1450			dev->stats.rx_errors++;
1451			if (frame_status & 0x00600000)
1452				dev->stats.rx_length_errors++;
1453			if (frame_status & 0x00080000)
1454				dev->stats.rx_frame_errors++;
1455			if (frame_status & 0x00100000)
1456				dev->stats.rx_crc_errors++;
1457			if (frame_status < 0)
1458				dev->stats.rx_dropped++;
1459		} else {
1460			struct sk_buff *skb;
1461			/* Omit CRC */
1462			u16 pkt_len = (frame_status & 0x07ff) - 4;
1463#ifdef RX_CHECKSUM
1464			u32 pfck = *(u32 *) &buf_addr[data_size - 8];
1465#endif
1466
1467
1468#ifndef final_version
1469			if (hamachi_debug > 4)
1470				printk(KERN_DEBUG "  hamachi_rx() normal Rx pkt length %d"
1471					   " of %d, bogus_cnt %d.\n",
1472					   pkt_len, data_size, boguscnt);
1473			if (hamachi_debug > 5)
1474				printk(KERN_DEBUG"%s:  rx status %8.8x %8.8x %8.8x %8.8x %8.8x.\n",
1475					   dev->name,
1476					   *(s32*)&(buf_addr[data_size - 20]),
1477					   *(s32*)&(buf_addr[data_size - 16]),
1478					   *(s32*)&(buf_addr[data_size - 12]),
1479					   *(s32*)&(buf_addr[data_size - 8]),
1480					   *(s32*)&(buf_addr[data_size - 4]));
1481#endif
1482			/* Check if the packet is long enough to accept without copying
1483			   to a minimally-sized skbuff. */
1484			if (pkt_len < rx_copybreak &&
1485			    (skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) {
1486#ifdef RX_CHECKSUM
1487				printk(KERN_ERR "%s: rx_copybreak non-zero "
1488				  "not good with RX_CHECKSUM\n", dev->name);
1489#endif
1490				skb_reserve(skb, 2);	/* 16 byte align the IP header */
1491				pci_dma_sync_single_for_cpu(hmp->pci_dev,
1492							    leXX_to_cpu(hmp->rx_ring[entry].addr),
1493							    hmp->rx_buf_sz,
1494							    PCI_DMA_FROMDEVICE);
1495				/* Call copy + cksum if available. */
1496#if 1 || USE_IP_COPYSUM
1497				skb_copy_to_linear_data(skb,
1498					hmp->rx_skbuff[entry]->data, pkt_len);
1499				skb_put(skb, pkt_len);
1500#else
1501				memcpy(skb_put(skb, pkt_len), hmp->rx_ring_dma
1502					+ entry*sizeof(*desc), pkt_len);
1503#endif
1504				pci_dma_sync_single_for_device(hmp->pci_dev,
1505							       leXX_to_cpu(hmp->rx_ring[entry].addr),
1506							       hmp->rx_buf_sz,
1507							       PCI_DMA_FROMDEVICE);
1508			} else {
1509				pci_unmap_single(hmp->pci_dev,
1510						 leXX_to_cpu(hmp->rx_ring[entry].addr),
1511						 hmp->rx_buf_sz, PCI_DMA_FROMDEVICE);
 
1512				skb_put(skb = hmp->rx_skbuff[entry], pkt_len);
1513				hmp->rx_skbuff[entry] = NULL;
1514			}
1515			skb->protocol = eth_type_trans(skb, dev);
1516
1517
1518#ifdef RX_CHECKSUM
1519			/* TCP or UDP on ipv4, DIX encoding */
1520			if (pfck>>24 == 0x91 || pfck>>24 == 0x51) {
1521				struct iphdr *ih = (struct iphdr *) skb->data;
1522				/* Check that IP packet is at least 46 bytes, otherwise,
1523				 * there may be pad bytes included in the hardware checksum.
1524				 * This wouldn't happen if everyone padded with 0.
1525				 */
1526				if (ntohs(ih->tot_len) >= 46){
1527					/* don't worry about frags */
1528					if (!(ih->frag_off & cpu_to_be16(IP_MF|IP_OFFSET))) {
1529						u32 inv = *(u32 *) &buf_addr[data_size - 16];
1530						u32 *p = (u32 *) &buf_addr[data_size - 20];
1531						register u32 crc, p_r, p_r1;
1532
1533						if (inv & 4) {
1534							inv &= ~4;
1535							--p;
1536						}
1537						p_r = *p;
1538						p_r1 = *(p-1);
1539						switch (inv) {
1540							case 0:
1541								crc = (p_r & 0xffff) + (p_r >> 16);
1542								break;
1543							case 1:
1544								crc = (p_r >> 16) + (p_r & 0xffff)
1545									+ (p_r1 >> 16 & 0xff00);
1546								break;
1547							case 2:
1548								crc = p_r + (p_r1 >> 16);
1549								break;
1550							case 3:
1551								crc = p_r + (p_r1 & 0xff00) + (p_r1 >> 16);
1552								break;
1553							default:	/*NOTREACHED*/ crc = 0;
1554						}
1555						if (crc & 0xffff0000) {
1556							crc &= 0xffff;
1557							++crc;
1558						}
1559						/* tcp/udp will add in pseudo */
1560						skb->csum = ntohs(pfck & 0xffff);
1561						if (skb->csum > crc)
1562							skb->csum -= crc;
1563						else
1564							skb->csum += (~crc & 0xffff);
1565						/*
1566						* could do the pseudo myself and return
1567						* CHECKSUM_UNNECESSARY
1568						*/
1569						skb->ip_summed = CHECKSUM_COMPLETE;
1570					}
1571				}
1572			}
1573#endif  /* RX_CHECKSUM */
1574
1575			netif_rx(skb);
1576			dev->stats.rx_packets++;
1577		}
1578		entry = (++hmp->cur_rx) % RX_RING_SIZE;
1579	}
1580
1581	/* Refill the Rx ring buffers. */
1582	for (; hmp->cur_rx - hmp->dirty_rx > 0; hmp->dirty_rx++) {
1583		struct hamachi_desc *desc;
1584
1585		entry = hmp->dirty_rx % RX_RING_SIZE;
1586		desc = &(hmp->rx_ring[entry]);
1587		if (hmp->rx_skbuff[entry] == NULL) {
1588			struct sk_buff *skb = netdev_alloc_skb(dev, hmp->rx_buf_sz + 2);
1589
1590			hmp->rx_skbuff[entry] = skb;
1591			if (skb == NULL)
1592				break;		/* Better luck next round. */
1593			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
1594                	desc->addr = cpu_to_leXX(pci_map_single(hmp->pci_dev,
1595				skb->data, hmp->rx_buf_sz, PCI_DMA_FROMDEVICE));
 
 
1596		}
1597		desc->status_n_length = cpu_to_le32(hmp->rx_buf_sz);
1598		if (entry >= RX_RING_SIZE-1)
1599			desc->status_n_length |= cpu_to_le32(DescOwn |
1600				DescEndPacket | DescEndRing | DescIntr);
1601		else
1602			desc->status_n_length |= cpu_to_le32(DescOwn |
1603				DescEndPacket | DescIntr);
1604	}
1605
1606	/* Restart Rx engine if stopped. */
1607	/* If we don't need to check status, don't. -KDU */
1608	if (readw(hmp->base + RxStatus) & 0x0002)
1609		writew(0x0001, hmp->base + RxCmd);
1610
1611	return 0;
1612}
1613
1614/* This is more properly named "uncommon interrupt events", as it covers more
1615   than just errors. */
1616static void hamachi_error(struct net_device *dev, int intr_status)
1617{
1618	struct hamachi_private *hmp = netdev_priv(dev);
1619	void __iomem *ioaddr = hmp->base;
1620
1621	if (intr_status & (LinkChange|NegotiationChange)) {
1622		if (hamachi_debug > 1)
1623			printk(KERN_INFO "%s: Link changed: AutoNegotiation Ctrl"
1624				   " %4.4x, Status %4.4x %4.4x Intr status %4.4x.\n",
1625				   dev->name, readw(ioaddr + 0x0E0), readw(ioaddr + 0x0E2),
1626				   readw(ioaddr + ANLinkPartnerAbility),
1627				   readl(ioaddr + IntrStatus));
1628		if (readw(ioaddr + ANStatus) & 0x20)
1629			writeb(0x01, ioaddr + LEDCtrl);
1630		else
1631			writeb(0x03, ioaddr + LEDCtrl);
1632	}
1633	if (intr_status & StatsMax) {
1634		hamachi_get_stats(dev);
1635		/* Read the overflow bits to clear. */
1636		readl(ioaddr + 0x370);
1637		readl(ioaddr + 0x3F0);
1638	}
1639	if ((intr_status & ~(LinkChange|StatsMax|NegotiationChange|IntrRxDone|IntrTxDone)) &&
1640	    hamachi_debug)
1641		printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
1642		       dev->name, intr_status);
1643	/* Hmmmmm, it's not clear how to recover from PCI faults. */
1644	if (intr_status & (IntrTxPCIErr | IntrTxPCIFault))
1645		dev->stats.tx_fifo_errors++;
1646	if (intr_status & (IntrRxPCIErr | IntrRxPCIFault))
1647		dev->stats.rx_fifo_errors++;
1648}
1649
1650static int hamachi_close(struct net_device *dev)
1651{
1652	struct hamachi_private *hmp = netdev_priv(dev);
1653	void __iomem *ioaddr = hmp->base;
1654	struct sk_buff *skb;
1655	int i;
1656
1657	netif_stop_queue(dev);
1658
1659	if (hamachi_debug > 1) {
1660		printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %4.4x Rx %4.4x Int %2.2x.\n",
1661			   dev->name, readw(ioaddr + TxStatus),
1662			   readw(ioaddr + RxStatus), readl(ioaddr + IntrStatus));
1663		printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d,  Rx %d / %d.\n",
1664			   dev->name, hmp->cur_tx, hmp->dirty_tx, hmp->cur_rx, hmp->dirty_rx);
1665	}
1666
1667	/* Disable interrupts by clearing the interrupt mask. */
1668	writel(0x0000, ioaddr + InterruptEnable);
1669
1670	/* Stop the chip's Tx and Rx processes. */
1671	writel(2, ioaddr + RxCmd);
1672	writew(2, ioaddr + TxCmd);
1673
1674#ifdef __i386__
1675	if (hamachi_debug > 2) {
1676		printk(KERN_DEBUG "  Tx ring at %8.8x:\n",
1677			   (int)hmp->tx_ring_dma);
1678		for (i = 0; i < TX_RING_SIZE; i++)
1679			printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x.\n",
1680				   readl(ioaddr + TxCurPtr) == (long)&hmp->tx_ring[i] ? '>' : ' ',
1681				   i, hmp->tx_ring[i].status_n_length, hmp->tx_ring[i].addr);
1682		printk(KERN_DEBUG "  Rx ring %8.8x:\n",
1683			   (int)hmp->rx_ring_dma);
1684		for (i = 0; i < RX_RING_SIZE; i++) {
1685			printk(KERN_DEBUG " %c #%d desc. %4.4x %8.8x\n",
1686				   readl(ioaddr + RxCurPtr) == (long)&hmp->rx_ring[i] ? '>' : ' ',
1687				   i, hmp->rx_ring[i].status_n_length, hmp->rx_ring[i].addr);
1688			if (hamachi_debug > 6) {
1689				if (*(u8*)hmp->rx_skbuff[i]->data != 0x69) {
1690					u16 *addr = (u16 *)
1691						hmp->rx_skbuff[i]->data;
1692					int j;
1693					printk(KERN_DEBUG "Addr: ");
1694					for (j = 0; j < 0x50; j++)
1695						printk(" %4.4x", addr[j]);
1696					printk("\n");
1697				}
1698			}
1699		}
1700	}
1701#endif /* __i386__ debugging only */
1702
1703	free_irq(hmp->pci_dev->irq, dev);
1704
1705	del_timer_sync(&hmp->timer);
1706
1707	/* Free all the skbuffs in the Rx queue. */
1708	for (i = 0; i < RX_RING_SIZE; i++) {
1709		skb = hmp->rx_skbuff[i];
1710		hmp->rx_ring[i].status_n_length = 0;
1711		if (skb) {
1712			pci_unmap_single(hmp->pci_dev,
1713				leXX_to_cpu(hmp->rx_ring[i].addr),
1714				hmp->rx_buf_sz, PCI_DMA_FROMDEVICE);
1715			dev_kfree_skb(skb);
1716			hmp->rx_skbuff[i] = NULL;
1717		}
1718		hmp->rx_ring[i].addr = cpu_to_leXX(0xBADF00D0); /* An invalid address. */
1719	}
1720	for (i = 0; i < TX_RING_SIZE; i++) {
1721		skb = hmp->tx_skbuff[i];
1722		if (skb) {
1723			pci_unmap_single(hmp->pci_dev,
1724				leXX_to_cpu(hmp->tx_ring[i].addr),
1725				skb->len, PCI_DMA_TODEVICE);
1726			dev_kfree_skb(skb);
1727			hmp->tx_skbuff[i] = NULL;
1728		}
1729	}
1730
1731	writeb(0x00, ioaddr + LEDCtrl);
1732
1733	return 0;
1734}
1735
1736static struct net_device_stats *hamachi_get_stats(struct net_device *dev)
1737{
1738	struct hamachi_private *hmp = netdev_priv(dev);
1739	void __iomem *ioaddr = hmp->base;
1740
1741	/* We should lock this segment of code for SMP eventually, although
1742	   the vulnerability window is very small and statistics are
1743	   non-critical. */
1744        /* Ok, what goes here?  This appears to be stuck at 21 packets
1745           according to ifconfig.  It does get incremented in hamachi_tx(),
1746           so I think I'll comment it out here and see if better things
1747           happen.
1748        */
1749	/* dev->stats.tx_packets	= readl(ioaddr + 0x000); */
1750
1751	/* Total Uni+Brd+Multi */
1752	dev->stats.rx_bytes = readl(ioaddr + 0x330);
1753	/* Total Uni+Brd+Multi */
1754	dev->stats.tx_bytes = readl(ioaddr + 0x3B0);
1755	/* Multicast Rx */
1756	dev->stats.multicast = readl(ioaddr + 0x320);
1757
1758	/* Over+Undersized */
1759	dev->stats.rx_length_errors = readl(ioaddr + 0x368);
1760	/* Jabber */
1761	dev->stats.rx_over_errors = readl(ioaddr + 0x35C);
1762	/* Jabber */
1763	dev->stats.rx_crc_errors = readl(ioaddr + 0x360);
1764	/* Symbol Errs */
1765	dev->stats.rx_frame_errors = readl(ioaddr + 0x364);
1766	/* Dropped */
1767	dev->stats.rx_missed_errors = readl(ioaddr + 0x36C);
1768
1769	return &dev->stats;
1770}
1771
1772static void set_rx_mode(struct net_device *dev)
1773{
1774	struct hamachi_private *hmp = netdev_priv(dev);
1775	void __iomem *ioaddr = hmp->base;
1776
1777	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
1778		writew(0x000F, ioaddr + AddrMode);
1779	} else if ((netdev_mc_count(dev) > 63) || (dev->flags & IFF_ALLMULTI)) {
1780		/* Too many to match, or accept all multicasts. */
1781		writew(0x000B, ioaddr + AddrMode);
1782	} else if (!netdev_mc_empty(dev)) { /* Must use the CAM filter. */
1783		struct netdev_hw_addr *ha;
1784		int i = 0;
1785
1786		netdev_for_each_mc_addr(ha, dev) {
1787			writel(*(u32 *)(ha->addr), ioaddr + 0x100 + i*8);
1788			writel(0x20000 | (*(u16 *)&ha->addr[4]),
1789				   ioaddr + 0x104 + i*8);
1790			i++;
1791		}
1792		/* Clear remaining entries. */
1793		for (; i < 64; i++)
1794			writel(0, ioaddr + 0x104 + i*8);
1795		writew(0x0003, ioaddr + AddrMode);
1796	} else {					/* Normal, unicast/broadcast-only mode. */
1797		writew(0x0001, ioaddr + AddrMode);
1798	}
1799}
1800
1801static int check_if_running(struct net_device *dev)
1802{
1803	if (!netif_running(dev))
1804		return -EINVAL;
1805	return 0;
1806}
1807
1808static void hamachi_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1809{
1810	struct hamachi_private *np = netdev_priv(dev);
1811
1812	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1813	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1814	strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info));
1815}
1816
1817static int hamachi_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 
1818{
1819	struct hamachi_private *np = netdev_priv(dev);
1820	spin_lock_irq(&np->lock);
1821	mii_ethtool_gset(&np->mii_if, ecmd);
1822	spin_unlock_irq(&np->lock);
1823	return 0;
1824}
1825
1826static int hamachi_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 
1827{
1828	struct hamachi_private *np = netdev_priv(dev);
1829	int res;
1830	spin_lock_irq(&np->lock);
1831	res = mii_ethtool_sset(&np->mii_if, ecmd);
1832	spin_unlock_irq(&np->lock);
1833	return res;
1834}
1835
1836static int hamachi_nway_reset(struct net_device *dev)
1837{
1838	struct hamachi_private *np = netdev_priv(dev);
1839	return mii_nway_restart(&np->mii_if);
1840}
1841
1842static u32 hamachi_get_link(struct net_device *dev)
1843{
1844	struct hamachi_private *np = netdev_priv(dev);
1845	return mii_link_ok(&np->mii_if);
1846}
1847
1848static const struct ethtool_ops ethtool_ops = {
1849	.begin = check_if_running,
1850	.get_drvinfo = hamachi_get_drvinfo,
1851	.get_settings = hamachi_get_settings,
1852	.set_settings = hamachi_set_settings,
1853	.nway_reset = hamachi_nway_reset,
1854	.get_link = hamachi_get_link,
 
 
1855};
1856
1857static const struct ethtool_ops ethtool_ops_no_mii = {
1858	.begin = check_if_running,
1859	.get_drvinfo = hamachi_get_drvinfo,
1860};
1861
1862static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1863{
1864	struct hamachi_private *np = netdev_priv(dev);
1865	struct mii_ioctl_data *data = if_mii(rq);
1866	int rc;
1867
1868	if (!netif_running(dev))
1869		return -EINVAL;
1870
1871	if (cmd == (SIOCDEVPRIVATE+3)) { /* set rx,tx intr params */
1872		u32 *d = (u32 *)&rq->ifr_ifru;
1873		/* Should add this check here or an ordinary user can do nasty
1874		 * things. -KDU
1875		 *
1876		 * TODO: Shut down the Rx and Tx engines while doing this.
1877		 */
1878		if (!capable(CAP_NET_ADMIN))
1879			return -EPERM;
1880		writel(d[0], np->base + TxIntrCtrl);
1881		writel(d[1], np->base + RxIntrCtrl);
1882		printk(KERN_NOTICE "%s: tx %08x, rx %08x intr\n", dev->name,
1883		  (u32) readl(np->base + TxIntrCtrl),
1884		  (u32) readl(np->base + RxIntrCtrl));
1885		rc = 0;
1886	}
1887
1888	else {
1889		spin_lock_irq(&np->lock);
1890		rc = generic_mii_ioctl(&np->mii_if, data, cmd, NULL);
1891		spin_unlock_irq(&np->lock);
1892	}
1893
1894	return rc;
1895}
1896
1897
1898static void hamachi_remove_one(struct pci_dev *pdev)
1899{
1900	struct net_device *dev = pci_get_drvdata(pdev);
1901
1902	if (dev) {
1903		struct hamachi_private *hmp = netdev_priv(dev);
1904
1905		pci_free_consistent(pdev, RX_TOTAL_SIZE, hmp->rx_ring,
1906			hmp->rx_ring_dma);
1907		pci_free_consistent(pdev, TX_TOTAL_SIZE, hmp->tx_ring,
1908			hmp->tx_ring_dma);
1909		unregister_netdev(dev);
1910		iounmap(hmp->base);
1911		free_netdev(dev);
1912		pci_release_regions(pdev);
1913	}
1914}
1915
1916static DEFINE_PCI_DEVICE_TABLE(hamachi_pci_tbl) = {
1917	{ 0x1318, 0x0911, PCI_ANY_ID, PCI_ANY_ID, },
1918	{ 0, }
1919};
1920MODULE_DEVICE_TABLE(pci, hamachi_pci_tbl);
1921
1922static struct pci_driver hamachi_driver = {
1923	.name		= DRV_NAME,
1924	.id_table	= hamachi_pci_tbl,
1925	.probe		= hamachi_init_one,
1926	.remove		= hamachi_remove_one,
1927};
1928
1929static int __init hamachi_init (void)
1930{
1931/* when a module, this is printed whether or not devices are found in probe */
1932#ifdef MODULE
1933	printk(version);
1934#endif
1935	return pci_register_driver(&hamachi_driver);
1936}
1937
1938static void __exit hamachi_exit (void)
1939{
1940	pci_unregister_driver(&hamachi_driver);
1941}
1942
1943
1944module_init(hamachi_init);
1945module_exit(hamachi_exit);