1#
 2# Freescale device configuration
 3#
 4
 5config NET_VENDOR_FREESCALE
 6	bool "Freescale devices"
 7	default y
 8	depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
 9		   M523x || M527x || M5272 || M528x || M520x || M532x || \
10		   ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM)
11	---help---
12	  If you have a network (Ethernet) card belonging to this class, say Y
13	  and read the Ethernet-HOWTO, available from
14	  <http://www.tldp.org/docs.html#howto>.
15
16	  Note that the answer to this question doesn't directly affect the
17	  kernel: saying N will just cause the configurator to skip all
18	  the questions about Freescale devices. If you say Y, you will be
19	  asked for your specific card in the following questions.
20
21if NET_VENDOR_FREESCALE
22
23config FEC
24	tristate "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
25	depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
26		   ARCH_MXC || SOC_IMX28)
27	default ARCH_MXC || SOC_IMX28 if ARM
 
 
28	select PHYLIB
29	select PTP_1588_CLOCK
30	---help---
 
 
31	  Say Y here if you want to use the built-in 10/100 Fast ethernet
32	  controller on some Motorola ColdFire and Freescale i.MX processors.
33
34config FEC_MPC52xx
35	tristate "FEC MPC52xx driver"
36	depends on PPC_MPC52xx && PPC_BESTCOMM
37	select CRC32
38	select PHYLIB
39	select PPC_BESTCOMM_FEC
40	---help---
41	  This option enables support for the MPC5200's on-chip
42	  Fast Ethernet Controller
43	  If compiled as module, it will be called fec_mpc52xx.
44
45config FEC_MPC52xx_MDIO
46	bool "FEC MPC52xx MDIO bus driver"
47	depends on FEC_MPC52xx
48	default y
49	---help---
50	  The MPC5200's FEC can connect to the Ethernet either with
51	  an external MII PHY chip or 10 Mbps 7-wire interface
52	  (Motorola? industry standard).
53	  If your board uses an external PHY connected to FEC, enable this.
54	  If not sure, enable.
55	  If compiled as module, it will be called fec_mpc52xx_phy.
56
57source "drivers/net/ethernet/freescale/fs_enet/Kconfig"
 
58
59config FSL_PQ_MDIO
60	tristate "Freescale PQ MDIO"
61	depends on FSL_SOC
62	select PHYLIB
63	---help---
64	  This driver supports the MDIO bus used by the gianfar and UCC drivers.
65
66config FSL_XGMAC_MDIO
67	tristate "Freescale XGMAC MDIO"
68	depends on FSL_SOC
69	select PHYLIB
70	---help---
71	  This driver supports the MDIO bus on the Fman 10G Ethernet MACs.
 
 
 
 
72
73config UCC_GETH
74	tristate "Freescale QE Gigabit Ethernet"
75	depends on QUICC_ENGINE
76	select FSL_PQ_MDIO
77	select PHYLIB
78	---help---
 
79	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
80	  which is available on some Freescale SOCs.
81
82config UGETH_TX_ON_DEMAND
83	bool "Transmit on Demand support"
84	depends on UCC_GETH
85
86config GIANFAR
87	tristate "Gianfar Ethernet"
88	depends on FSL_SOC
89	select FSL_PQ_MDIO
90	select PHYLIB
 
91	select CRC32
92	---help---
93	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
94	  and MPC86xx family of chips, and the FEC on the 8540.
 
 
 
 
 
95
96endif # NET_VENDOR_FREESCALE

  1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# Freescale device configuration
  4#
  5
  6config NET_VENDOR_FREESCALE
  7	bool "Freescale devices"
  8	default y
  9	depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
 10		   M523x || M527x || M5272 || M528x || M520x || M532x || \
 11		   ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \
 12		   ARCH_LAYERSCAPE || ARCH_S32 || COMPILE_TEST
 13	help
 14	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 15
 16	  Note that the answer to this question doesn't directly affect the
 17	  kernel: saying N will just cause the configurator to skip all
 18	  the questions about Freescale devices. If you say Y, you will be
 19	  asked for your specific card in the following questions.
 20
 21if NET_VENDOR_FREESCALE
 22
 23config FEC
 24	tristate "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
 25	depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
 26		   ARCH_MXC || ARCH_S32 || SOC_IMX28 || COMPILE_TEST)
 27	default ARCH_MXC || SOC_IMX28 if ARM
 28	depends on PTP_1588_CLOCK_OPTIONAL
 29	select CRC32
 30	select PHYLIB
 31	select PAGE_POOL
 32	imply PAGE_POOL_STATS
 33	imply NET_SELFTESTS
 34	help
 35	  Say Y here if you want to use the built-in 10/100 Fast ethernet
 36	  controller on some Motorola ColdFire and Freescale i.MX/S32 processors.
 37
 38config FEC_MPC52xx
 39	tristate "FEC MPC52xx driver"
 40	depends on PPC_MPC52xx && PPC_BESTCOMM
 41	select CRC32
 42	select PHYLIB
 43	select PPC_BESTCOMM_FEC
 44	help
 45	  This option enables support for the MPC5200's on-chip
 46	  Fast Ethernet Controller
 47	  If compiled as module, it will be called fec_mpc52xx.
 48
 49config FEC_MPC52xx_MDIO
 50	bool "FEC MPC52xx MDIO bus driver"
 51	depends on FEC_MPC52xx
 52	default y
 53	help
 54	  The MPC5200's FEC can connect to the Ethernet either with
 55	  an external MII PHY chip or 10 Mbps 7-wire interface
 56	  (Motorola? industry standard).
 57	  If your board uses an external PHY connected to FEC, enable this.
 58	  If not sure, enable.
 59	  If compiled as module, it will be called fec_mpc52xx_phy.
 60
 61source "drivers/net/ethernet/freescale/fs_enet/Kconfig"
 62source "drivers/net/ethernet/freescale/fman/Kconfig"
 63
 64config FSL_PQ_MDIO
 65	tristate "Freescale PQ MDIO"
 
 66	select PHYLIB
 67	help
 68	  This driver supports the MDIO bus used by the gianfar and UCC drivers.
 69
 70config FSL_XGMAC_MDIO
 71	tristate "Freescale XGMAC MDIO"
 
 72	select PHYLIB
 73	depends on OF
 74	select MDIO_DEVRES
 75	select OF_MDIO
 76	help
 77	  This driver supports the MDIO bus on the Fman 10G Ethernet MACs, and
 78	  on the FMan mEMAC (which supports both Clauses 22 and 45)
 79
 80config UCC_GETH
 81	tristate "Freescale QE Gigabit Ethernet"
 82	depends on QUICC_ENGINE && PPC32
 83	select FSL_PQ_MDIO
 84	select PHYLIB
 85	select FIXED_PHY
 86	help
 87	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
 88	  which is available on some Freescale SOCs.
 89
 90config UGETH_TX_ON_DEMAND
 91	bool "Transmit on Demand support"
 92	depends on UCC_GETH
 93
 94config GIANFAR
 95	tristate "Gianfar Ethernet"
 96	depends on HAS_DMA
 97	select FSL_PQ_MDIO
 98	select PHYLIB
 99	select FIXED_PHY
100	select CRC32
101	help
102	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
103	  and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
104	  on the 8540.
105
106source "drivers/net/ethernet/freescale/dpaa/Kconfig"
107source "drivers/net/ethernet/freescale/dpaa2/Kconfig"
108source "drivers/net/ethernet/freescale/enetc/Kconfig"
109
110endif # NET_VENDOR_FREESCALE