Loading...
1/*
2 * Copyright (c) 2010, 2011 Fabien Marteau <fabien.marteau@armadeus.com>
3 * Sponsored by ARMadeus Systems
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 *
19 * Driver for Austria Microsystems joysticks AS5011
20 *
21 * TODO:
22 * - Power on the chip when open() and power down when close()
23 * - Manage power mode
24 */
25
26#include <linux/i2c.h>
27#include <linux/interrupt.h>
28#include <linux/input.h>
29#include <linux/gpio.h>
30#include <linux/delay.h>
31#include <linux/input/as5011.h>
32#include <linux/slab.h>
33#include <linux/module.h>
34
35#define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
36#define MODULE_DEVICE_ALIAS "as5011"
37
38MODULE_AUTHOR("Fabien Marteau <fabien.marteau@armadeus.com>");
39MODULE_DESCRIPTION(DRIVER_DESC);
40MODULE_LICENSE("GPL");
41
42/* registers */
43#define AS5011_CTRL1 0x76
44#define AS5011_CTRL2 0x75
45#define AS5011_XP 0x43
46#define AS5011_XN 0x44
47#define AS5011_YP 0x53
48#define AS5011_YN 0x54
49#define AS5011_X_REG 0x41
50#define AS5011_Y_REG 0x42
51#define AS5011_X_RES_INT 0x51
52#define AS5011_Y_RES_INT 0x52
53
54/* CTRL1 bits */
55#define AS5011_CTRL1_LP_PULSED 0x80
56#define AS5011_CTRL1_LP_ACTIVE 0x40
57#define AS5011_CTRL1_LP_CONTINUE 0x20
58#define AS5011_CTRL1_INT_WUP_EN 0x10
59#define AS5011_CTRL1_INT_ACT_EN 0x08
60#define AS5011_CTRL1_EXT_CLK_EN 0x04
61#define AS5011_CTRL1_SOFT_RST 0x02
62#define AS5011_CTRL1_DATA_VALID 0x01
63
64/* CTRL2 bits */
65#define AS5011_CTRL2_EXT_SAMPLE_EN 0x08
66#define AS5011_CTRL2_RC_BIAS_ON 0x04
67#define AS5011_CTRL2_INV_SPINNING 0x02
68
69#define AS5011_MAX_AXIS 80
70#define AS5011_MIN_AXIS (-80)
71#define AS5011_FUZZ 8
72#define AS5011_FLAT 40
73
74struct as5011_device {
75 struct input_dev *input_dev;
76 struct i2c_client *i2c_client;
77 unsigned int button_gpio;
78 unsigned int button_irq;
79 unsigned int axis_irq;
80};
81
82static int as5011_i2c_write(struct i2c_client *client,
83 uint8_t aregaddr,
84 uint8_t avalue)
85{
86 uint8_t data[2] = { aregaddr, avalue };
87 struct i2c_msg msg = {
88 .addr = client->addr,
89 .flags = I2C_M_IGNORE_NAK,
90 .len = 2,
91 .buf = (uint8_t *)data
92 };
93 int error;
94
95 error = i2c_transfer(client->adapter, &msg, 1);
96 return error < 0 ? error : 0;
97}
98
99static int as5011_i2c_read(struct i2c_client *client,
100 uint8_t aregaddr, signed char *value)
101{
102 uint8_t data[2] = { aregaddr };
103 struct i2c_msg msg_set[2] = {
104 {
105 .addr = client->addr,
106 .flags = I2C_M_REV_DIR_ADDR,
107 .len = 1,
108 .buf = (uint8_t *)data
109 },
110 {
111 .addr = client->addr,
112 .flags = I2C_M_RD | I2C_M_NOSTART,
113 .len = 1,
114 .buf = (uint8_t *)data
115 }
116 };
117 int error;
118
119 error = i2c_transfer(client->adapter, msg_set, 2);
120 if (error < 0)
121 return error;
122
123 *value = data[0] & 0x80 ? -1 * (1 + ~data[0]) : data[0];
124 return 0;
125}
126
127static irqreturn_t as5011_button_interrupt(int irq, void *dev_id)
128{
129 struct as5011_device *as5011 = dev_id;
130 int val = gpio_get_value_cansleep(as5011->button_gpio);
131
132 input_report_key(as5011->input_dev, BTN_JOYSTICK, !val);
133 input_sync(as5011->input_dev);
134
135 return IRQ_HANDLED;
136}
137
138static irqreturn_t as5011_axis_interrupt(int irq, void *dev_id)
139{
140 struct as5011_device *as5011 = dev_id;
141 int error;
142 signed char x, y;
143
144 error = as5011_i2c_read(as5011->i2c_client, AS5011_X_RES_INT, &x);
145 if (error < 0)
146 goto out;
147
148 error = as5011_i2c_read(as5011->i2c_client, AS5011_Y_RES_INT, &y);
149 if (error < 0)
150 goto out;
151
152 input_report_abs(as5011->input_dev, ABS_X, x);
153 input_report_abs(as5011->input_dev, ABS_Y, y);
154 input_sync(as5011->input_dev);
155
156out:
157 return IRQ_HANDLED;
158}
159
160static int as5011_configure_chip(struct as5011_device *as5011,
161 const struct as5011_platform_data *plat_dat)
162{
163 struct i2c_client *client = as5011->i2c_client;
164 int error;
165 signed char value;
166
167 /* chip soft reset */
168 error = as5011_i2c_write(client, AS5011_CTRL1,
169 AS5011_CTRL1_SOFT_RST);
170 if (error < 0) {
171 dev_err(&client->dev, "Soft reset failed\n");
172 return error;
173 }
174
175 mdelay(10);
176
177 error = as5011_i2c_write(client, AS5011_CTRL1,
178 AS5011_CTRL1_LP_PULSED |
179 AS5011_CTRL1_LP_ACTIVE |
180 AS5011_CTRL1_INT_ACT_EN);
181 if (error < 0) {
182 dev_err(&client->dev, "Power config failed\n");
183 return error;
184 }
185
186 error = as5011_i2c_write(client, AS5011_CTRL2,
187 AS5011_CTRL2_INV_SPINNING);
188 if (error < 0) {
189 dev_err(&client->dev, "Can't invert spinning\n");
190 return error;
191 }
192
193 /* write threshold */
194 error = as5011_i2c_write(client, AS5011_XP, plat_dat->xp);
195 if (error < 0) {
196 dev_err(&client->dev, "Can't write threshold\n");
197 return error;
198 }
199
200 error = as5011_i2c_write(client, AS5011_XN, plat_dat->xn);
201 if (error < 0) {
202 dev_err(&client->dev, "Can't write threshold\n");
203 return error;
204 }
205
206 error = as5011_i2c_write(client, AS5011_YP, plat_dat->yp);
207 if (error < 0) {
208 dev_err(&client->dev, "Can't write threshold\n");
209 return error;
210 }
211
212 error = as5011_i2c_write(client, AS5011_YN, plat_dat->yn);
213 if (error < 0) {
214 dev_err(&client->dev, "Can't write threshold\n");
215 return error;
216 }
217
218 /* to free irq gpio in chip */
219 error = as5011_i2c_read(client, AS5011_X_RES_INT, &value);
220 if (error < 0) {
221 dev_err(&client->dev, "Can't read i2c X resolution value\n");
222 return error;
223 }
224
225 return 0;
226}
227
228static int as5011_probe(struct i2c_client *client,
229 const struct i2c_device_id *id)
230{
231 const struct as5011_platform_data *plat_data;
232 struct as5011_device *as5011;
233 struct input_dev *input_dev;
234 int irq;
235 int error;
236
237 plat_data = dev_get_platdata(&client->dev);
238 if (!plat_data)
239 return -EINVAL;
240
241 if (!plat_data->axis_irq) {
242 dev_err(&client->dev, "No axis IRQ?\n");
243 return -EINVAL;
244 }
245
246 if (!i2c_check_functionality(client->adapter,
247 I2C_FUNC_NOSTART |
248 I2C_FUNC_PROTOCOL_MANGLING)) {
249 dev_err(&client->dev,
250 "need i2c bus that supports protocol mangling\n");
251 return -ENODEV;
252 }
253
254 as5011 = kmalloc(sizeof(struct as5011_device), GFP_KERNEL);
255 input_dev = input_allocate_device();
256 if (!as5011 || !input_dev) {
257 dev_err(&client->dev,
258 "Can't allocate memory for device structure\n");
259 error = -ENOMEM;
260 goto err_free_mem;
261 }
262
263 as5011->i2c_client = client;
264 as5011->input_dev = input_dev;
265 as5011->button_gpio = plat_data->button_gpio;
266 as5011->axis_irq = plat_data->axis_irq;
267
268 input_dev->name = "Austria Microsystem as5011 joystick";
269 input_dev->id.bustype = BUS_I2C;
270 input_dev->dev.parent = &client->dev;
271
272 __set_bit(EV_KEY, input_dev->evbit);
273 __set_bit(EV_ABS, input_dev->evbit);
274 __set_bit(BTN_JOYSTICK, input_dev->keybit);
275
276 input_set_abs_params(input_dev, ABS_X,
277 AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT);
278 input_set_abs_params(as5011->input_dev, ABS_Y,
279 AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT);
280
281 error = gpio_request(as5011->button_gpio, "AS5011 button");
282 if (error < 0) {
283 dev_err(&client->dev, "Failed to request button gpio\n");
284 goto err_free_mem;
285 }
286
287 irq = gpio_to_irq(as5011->button_gpio);
288 if (irq < 0) {
289 dev_err(&client->dev,
290 "Failed to get irq number for button gpio\n");
291 error = irq;
292 goto err_free_button_gpio;
293 }
294
295 as5011->button_irq = irq;
296
297 error = request_threaded_irq(as5011->button_irq,
298 NULL, as5011_button_interrupt,
299 IRQF_TRIGGER_RISING |
300 IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
301 "as5011_button", as5011);
302 if (error < 0) {
303 dev_err(&client->dev,
304 "Can't allocate button irq %d\n", as5011->button_irq);
305 goto err_free_button_gpio;
306 }
307
308 error = as5011_configure_chip(as5011, plat_data);
309 if (error)
310 goto err_free_button_irq;
311
312 error = request_threaded_irq(as5011->axis_irq, NULL,
313 as5011_axis_interrupt,
314 plat_data->axis_irqflags | IRQF_ONESHOT,
315 "as5011_joystick", as5011);
316 if (error) {
317 dev_err(&client->dev,
318 "Can't allocate axis irq %d\n", plat_data->axis_irq);
319 goto err_free_button_irq;
320 }
321
322 error = input_register_device(as5011->input_dev);
323 if (error) {
324 dev_err(&client->dev, "Failed to register input device\n");
325 goto err_free_axis_irq;
326 }
327
328 i2c_set_clientdata(client, as5011);
329
330 return 0;
331
332err_free_axis_irq:
333 free_irq(as5011->axis_irq, as5011);
334err_free_button_irq:
335 free_irq(as5011->button_irq, as5011);
336err_free_button_gpio:
337 gpio_free(as5011->button_gpio);
338err_free_mem:
339 input_free_device(input_dev);
340 kfree(as5011);
341
342 return error;
343}
344
345static int as5011_remove(struct i2c_client *client)
346{
347 struct as5011_device *as5011 = i2c_get_clientdata(client);
348
349 free_irq(as5011->axis_irq, as5011);
350 free_irq(as5011->button_irq, as5011);
351 gpio_free(as5011->button_gpio);
352
353 input_unregister_device(as5011->input_dev);
354 kfree(as5011);
355
356 return 0;
357}
358
359static const struct i2c_device_id as5011_id[] = {
360 { MODULE_DEVICE_ALIAS, 0 },
361 { }
362};
363MODULE_DEVICE_TABLE(i2c, as5011_id);
364
365static struct i2c_driver as5011_driver = {
366 .driver = {
367 .name = "as5011",
368 },
369 .probe = as5011_probe,
370 .remove = as5011_remove,
371 .id_table = as5011_id,
372};
373
374module_i2c_driver(as5011_driver);
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (c) 2010, 2011 Fabien Marteau <fabien.marteau@armadeus.com>
4 * Sponsored by ARMadeus Systems
5 *
6 * Driver for Austria Microsystems joysticks AS5011
7 *
8 * TODO:
9 * - Power on the chip when open() and power down when close()
10 * - Manage power mode
11 */
12
13#include <linux/i2c.h>
14#include <linux/interrupt.h>
15#include <linux/input.h>
16#include <linux/gpio/consumer.h>
17#include <linux/delay.h>
18#include <linux/input/as5011.h>
19#include <linux/slab.h>
20#include <linux/module.h>
21
22#define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
23#define MODULE_DEVICE_ALIAS "as5011"
24
25MODULE_AUTHOR("Fabien Marteau <fabien.marteau@armadeus.com>");
26MODULE_DESCRIPTION(DRIVER_DESC);
27MODULE_LICENSE("GPL");
28
29/* registers */
30#define AS5011_CTRL1 0x76
31#define AS5011_CTRL2 0x75
32#define AS5011_XP 0x43
33#define AS5011_XN 0x44
34#define AS5011_YP 0x53
35#define AS5011_YN 0x54
36#define AS5011_X_REG 0x41
37#define AS5011_Y_REG 0x42
38#define AS5011_X_RES_INT 0x51
39#define AS5011_Y_RES_INT 0x52
40
41/* CTRL1 bits */
42#define AS5011_CTRL1_LP_PULSED 0x80
43#define AS5011_CTRL1_LP_ACTIVE 0x40
44#define AS5011_CTRL1_LP_CONTINUE 0x20
45#define AS5011_CTRL1_INT_WUP_EN 0x10
46#define AS5011_CTRL1_INT_ACT_EN 0x08
47#define AS5011_CTRL1_EXT_CLK_EN 0x04
48#define AS5011_CTRL1_SOFT_RST 0x02
49#define AS5011_CTRL1_DATA_VALID 0x01
50
51/* CTRL2 bits */
52#define AS5011_CTRL2_EXT_SAMPLE_EN 0x08
53#define AS5011_CTRL2_RC_BIAS_ON 0x04
54#define AS5011_CTRL2_INV_SPINNING 0x02
55
56#define AS5011_MAX_AXIS 80
57#define AS5011_MIN_AXIS (-80)
58#define AS5011_FUZZ 8
59#define AS5011_FLAT 40
60
61struct as5011_device {
62 struct input_dev *input_dev;
63 struct i2c_client *i2c_client;
64 struct gpio_desc *button_gpiod;
65 unsigned int button_irq;
66 unsigned int axis_irq;
67};
68
69static int as5011_i2c_write(struct i2c_client *client,
70 uint8_t aregaddr,
71 uint8_t avalue)
72{
73 uint8_t data[2] = { aregaddr, avalue };
74 struct i2c_msg msg = {
75 .addr = client->addr,
76 .flags = I2C_M_IGNORE_NAK,
77 .len = 2,
78 .buf = (uint8_t *)data
79 };
80 int error;
81
82 error = i2c_transfer(client->adapter, &msg, 1);
83 return error < 0 ? error : 0;
84}
85
86static int as5011_i2c_read(struct i2c_client *client,
87 uint8_t aregaddr, signed char *value)
88{
89 uint8_t data[2] = { aregaddr };
90 struct i2c_msg msg_set[2] = {
91 {
92 .addr = client->addr,
93 .flags = I2C_M_REV_DIR_ADDR,
94 .len = 1,
95 .buf = (uint8_t *)data
96 },
97 {
98 .addr = client->addr,
99 .flags = I2C_M_RD | I2C_M_NOSTART,
100 .len = 1,
101 .buf = (uint8_t *)data
102 }
103 };
104 int error;
105
106 error = i2c_transfer(client->adapter, msg_set, 2);
107 if (error < 0)
108 return error;
109
110 *value = data[0] & 0x80 ? -1 * (1 + ~data[0]) : data[0];
111 return 0;
112}
113
114static irqreturn_t as5011_button_interrupt(int irq, void *dev_id)
115{
116 struct as5011_device *as5011 = dev_id;
117 int val = gpiod_get_value_cansleep(as5011->button_gpiod);
118
119 input_report_key(as5011->input_dev, BTN_JOYSTICK, !val);
120 input_sync(as5011->input_dev);
121
122 return IRQ_HANDLED;
123}
124
125static irqreturn_t as5011_axis_interrupt(int irq, void *dev_id)
126{
127 struct as5011_device *as5011 = dev_id;
128 int error;
129 signed char x, y;
130
131 error = as5011_i2c_read(as5011->i2c_client, AS5011_X_RES_INT, &x);
132 if (error < 0)
133 goto out;
134
135 error = as5011_i2c_read(as5011->i2c_client, AS5011_Y_RES_INT, &y);
136 if (error < 0)
137 goto out;
138
139 input_report_abs(as5011->input_dev, ABS_X, x);
140 input_report_abs(as5011->input_dev, ABS_Y, y);
141 input_sync(as5011->input_dev);
142
143out:
144 return IRQ_HANDLED;
145}
146
147static int as5011_configure_chip(struct as5011_device *as5011,
148 const struct as5011_platform_data *plat_dat)
149{
150 struct i2c_client *client = as5011->i2c_client;
151 int error;
152 signed char value;
153
154 /* chip soft reset */
155 error = as5011_i2c_write(client, AS5011_CTRL1,
156 AS5011_CTRL1_SOFT_RST);
157 if (error < 0) {
158 dev_err(&client->dev, "Soft reset failed\n");
159 return error;
160 }
161
162 mdelay(10);
163
164 error = as5011_i2c_write(client, AS5011_CTRL1,
165 AS5011_CTRL1_LP_PULSED |
166 AS5011_CTRL1_LP_ACTIVE |
167 AS5011_CTRL1_INT_ACT_EN);
168 if (error < 0) {
169 dev_err(&client->dev, "Power config failed\n");
170 return error;
171 }
172
173 error = as5011_i2c_write(client, AS5011_CTRL2,
174 AS5011_CTRL2_INV_SPINNING);
175 if (error < 0) {
176 dev_err(&client->dev, "Can't invert spinning\n");
177 return error;
178 }
179
180 /* write threshold */
181 error = as5011_i2c_write(client, AS5011_XP, plat_dat->xp);
182 if (error < 0) {
183 dev_err(&client->dev, "Can't write threshold\n");
184 return error;
185 }
186
187 error = as5011_i2c_write(client, AS5011_XN, plat_dat->xn);
188 if (error < 0) {
189 dev_err(&client->dev, "Can't write threshold\n");
190 return error;
191 }
192
193 error = as5011_i2c_write(client, AS5011_YP, plat_dat->yp);
194 if (error < 0) {
195 dev_err(&client->dev, "Can't write threshold\n");
196 return error;
197 }
198
199 error = as5011_i2c_write(client, AS5011_YN, plat_dat->yn);
200 if (error < 0) {
201 dev_err(&client->dev, "Can't write threshold\n");
202 return error;
203 }
204
205 /* to free irq gpio in chip */
206 error = as5011_i2c_read(client, AS5011_X_RES_INT, &value);
207 if (error < 0) {
208 dev_err(&client->dev, "Can't read i2c X resolution value\n");
209 return error;
210 }
211
212 return 0;
213}
214
215static int as5011_probe(struct i2c_client *client)
216{
217 const struct as5011_platform_data *plat_data;
218 struct as5011_device *as5011;
219 struct input_dev *input_dev;
220 int irq;
221 int error;
222
223 plat_data = dev_get_platdata(&client->dev);
224 if (!plat_data)
225 return -EINVAL;
226
227 if (!plat_data->axis_irq) {
228 dev_err(&client->dev, "No axis IRQ?\n");
229 return -EINVAL;
230 }
231
232 if (!i2c_check_functionality(client->adapter,
233 I2C_FUNC_NOSTART |
234 I2C_FUNC_PROTOCOL_MANGLING)) {
235 dev_err(&client->dev,
236 "need i2c bus that supports protocol mangling\n");
237 return -ENODEV;
238 }
239
240 as5011 = kmalloc(sizeof(struct as5011_device), GFP_KERNEL);
241 input_dev = input_allocate_device();
242 if (!as5011 || !input_dev) {
243 dev_err(&client->dev,
244 "Can't allocate memory for device structure\n");
245 error = -ENOMEM;
246 goto err_free_mem;
247 }
248
249 as5011->i2c_client = client;
250 as5011->input_dev = input_dev;
251 as5011->axis_irq = plat_data->axis_irq;
252
253 input_dev->name = "Austria Microsystem as5011 joystick";
254 input_dev->id.bustype = BUS_I2C;
255 input_dev->dev.parent = &client->dev;
256
257 input_set_capability(input_dev, EV_KEY, BTN_JOYSTICK);
258
259 input_set_abs_params(input_dev, ABS_X,
260 AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT);
261 input_set_abs_params(as5011->input_dev, ABS_Y,
262 AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT);
263
264 as5011->button_gpiod = devm_gpiod_get(&client->dev, NULL, GPIOD_IN);
265 if (IS_ERR(as5011->button_gpiod)) {
266 error = PTR_ERR(as5011->button_gpiod);
267 dev_err(&client->dev, "Failed to request button GPIO\n");
268 goto err_free_mem;
269 }
270 gpiod_set_consumer_name(as5011->button_gpiod, "AS5011 button");
271
272 irq = gpiod_to_irq(as5011->button_gpiod);
273 if (irq < 0) {
274 dev_err(&client->dev,
275 "Failed to get irq number for button gpio\n");
276 error = irq;
277 goto err_free_mem;
278 }
279
280 as5011->button_irq = irq;
281
282 error = request_threaded_irq(as5011->button_irq,
283 NULL, as5011_button_interrupt,
284 IRQF_TRIGGER_RISING |
285 IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
286 "as5011_button", as5011);
287 if (error < 0) {
288 dev_err(&client->dev,
289 "Can't allocate button irq %d\n", as5011->button_irq);
290 goto err_free_mem;
291 }
292
293 error = as5011_configure_chip(as5011, plat_data);
294 if (error)
295 goto err_free_button_irq;
296
297 error = request_threaded_irq(as5011->axis_irq, NULL,
298 as5011_axis_interrupt,
299 plat_data->axis_irqflags | IRQF_ONESHOT,
300 "as5011_joystick", as5011);
301 if (error) {
302 dev_err(&client->dev,
303 "Can't allocate axis irq %d\n", plat_data->axis_irq);
304 goto err_free_button_irq;
305 }
306
307 error = input_register_device(as5011->input_dev);
308 if (error) {
309 dev_err(&client->dev, "Failed to register input device\n");
310 goto err_free_axis_irq;
311 }
312
313 i2c_set_clientdata(client, as5011);
314
315 return 0;
316
317err_free_axis_irq:
318 free_irq(as5011->axis_irq, as5011);
319err_free_button_irq:
320 free_irq(as5011->button_irq, as5011);
321err_free_mem:
322 input_free_device(input_dev);
323 kfree(as5011);
324
325 return error;
326}
327
328static void as5011_remove(struct i2c_client *client)
329{
330 struct as5011_device *as5011 = i2c_get_clientdata(client);
331
332 free_irq(as5011->axis_irq, as5011);
333 free_irq(as5011->button_irq, as5011);
334
335 input_unregister_device(as5011->input_dev);
336 kfree(as5011);
337}
338
339static const struct i2c_device_id as5011_id[] = {
340 { MODULE_DEVICE_ALIAS, 0 },
341 { }
342};
343MODULE_DEVICE_TABLE(i2c, as5011_id);
344
345static struct i2c_driver as5011_driver = {
346 .driver = {
347 .name = "as5011",
348 },
349 .probe = as5011_probe,
350 .remove = as5011_remove,
351 .id_table = as5011_id,
352};
353
354module_i2c_driver(as5011_driver);