Linux Audio

Check our new training course

Loading...
v3.15
 
  1/*
  2 * Touchwindow serial touchscreen driver
  3 *
  4 * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
  5 *
  6 * Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c)
  7 * Copyright (c) 2004 Vojtech Pavlik
  8 * and Dan Streetman <ddstreet@ieee.org>
  9 */
 10
 11/*
 12 * This program is free software; you can redistribute it and/or modify it
 13 * under the terms of the GNU General Public License version 2 as published
 14 * by the Free Software Foundation.
 15 */
 16
 17/*
 18 * 2005/02/19 Rick Koch:
 19 *   The Touchwindow I used is made by Edmark Corp. and
 20 *   constantly outputs a stream of 0's unless it is touched.
 21 *   It then outputs 3 bytes: X, Y, and a copy of Y.
 22 */
 23
 24#include <linux/errno.h>
 25#include <linux/kernel.h>
 26#include <linux/module.h>
 27#include <linux/slab.h>
 28#include <linux/input.h>
 29#include <linux/serio.h>
 30
 31#define DRIVER_DESC	"Touchwindow serial touchscreen driver"
 32
 33MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
 34MODULE_DESCRIPTION(DRIVER_DESC);
 35MODULE_LICENSE("GPL");
 36
 37/*
 38 * Definitions & global arrays.
 39 */
 40
 41#define TW_LENGTH 3
 42
 43#define TW_MIN_XC 0
 44#define TW_MAX_XC 0xff
 45#define TW_MIN_YC 0
 46#define TW_MAX_YC 0xff
 47
 48/*
 49 * Per-touchscreen data.
 50 */
 51
 52struct tw {
 53	struct input_dev *dev;
 54	struct serio *serio;
 55	int idx;
 56	int touched;
 57	unsigned char data[TW_LENGTH];
 58	char phys[32];
 59};
 60
 61static irqreturn_t tw_interrupt(struct serio *serio,
 62		unsigned char data, unsigned int flags)
 63{
 64	struct tw *tw = serio_get_drvdata(serio);
 65	struct input_dev *dev = tw->dev;
 66
 67	if (data) {		/* touch */
 68		tw->touched = 1;
 69		tw->data[tw->idx++] = data;
 70		/* verify length and that the two Y's are the same */
 71		if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
 72			input_report_abs(dev, ABS_X, tw->data[0]);
 73			input_report_abs(dev, ABS_Y, tw->data[1]);
 74			input_report_key(dev, BTN_TOUCH, 1);
 75			input_sync(dev);
 76			tw->idx = 0;
 77		}
 78	} else if (tw->touched) {	/* untouch */
 79		input_report_key(dev, BTN_TOUCH, 0);
 80		input_sync(dev);
 81		tw->idx = 0;
 82		tw->touched = 0;
 83	}
 84
 85	return IRQ_HANDLED;
 86}
 87
 88/*
 89 * tw_disconnect() is the opposite of tw_connect()
 90 */
 91
 92static void tw_disconnect(struct serio *serio)
 93{
 94	struct tw *tw = serio_get_drvdata(serio);
 95
 96	input_get_device(tw->dev);
 97	input_unregister_device(tw->dev);
 98	serio_close(serio);
 99	serio_set_drvdata(serio, NULL);
100	input_put_device(tw->dev);
101	kfree(tw);
102}
103
104/*
105 * tw_connect() is the routine that is called when someone adds a
106 * new serio device that supports the Touchwin protocol and registers it as
107 * an input device.
108 */
109
110static int tw_connect(struct serio *serio, struct serio_driver *drv)
111{
112	struct tw *tw;
113	struct input_dev *input_dev;
114	int err;
115
116	tw = kzalloc(sizeof(struct tw), GFP_KERNEL);
117	input_dev = input_allocate_device();
118	if (!tw || !input_dev) {
119		err = -ENOMEM;
120		goto fail1;
121	}
122
123	tw->serio = serio;
124	tw->dev = input_dev;
125	snprintf(tw->phys, sizeof(tw->phys), "%s/input0", serio->phys);
126
127	input_dev->name = "Touchwindow Serial TouchScreen";
128	input_dev->phys = tw->phys;
129	input_dev->id.bustype = BUS_RS232;
130	input_dev->id.vendor = SERIO_TOUCHWIN;
131	input_dev->id.product = 0;
132	input_dev->id.version = 0x0100;
133	input_dev->dev.parent = &serio->dev;
134	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
135	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
136	input_set_abs_params(tw->dev, ABS_X, TW_MIN_XC, TW_MAX_XC, 0, 0);
137	input_set_abs_params(tw->dev, ABS_Y, TW_MIN_YC, TW_MAX_YC, 0, 0);
138
139	serio_set_drvdata(serio, tw);
140
141	err = serio_open(serio, drv);
142	if (err)
143		goto fail2;
144
145	err = input_register_device(tw->dev);
146	if (err)
147		goto fail3;
148
149	return 0;
150
151 fail3:	serio_close(serio);
152 fail2:	serio_set_drvdata(serio, NULL);
153 fail1:	input_free_device(input_dev);
154	kfree(tw);
155	return err;
156}
157
158/*
159 * The serio driver structure.
160 */
161
162static struct serio_device_id tw_serio_ids[] = {
163	{
164		.type	= SERIO_RS232,
165		.proto	= SERIO_TOUCHWIN,
166		.id	= SERIO_ANY,
167		.extra	= SERIO_ANY,
168	},
169	{ 0 }
170};
171
172MODULE_DEVICE_TABLE(serio, tw_serio_ids);
173
174static struct serio_driver tw_drv = {
175	.driver		= {
176		.name	= "touchwin",
177	},
178	.description	= DRIVER_DESC,
179	.id_table	= tw_serio_ids,
180	.interrupt	= tw_interrupt,
181	.connect	= tw_connect,
182	.disconnect	= tw_disconnect,
183};
184
185module_serio_driver(tw_drv);
v6.8
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Touchwindow serial touchscreen driver
  4 *
  5 * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
  6 *
  7 * Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c)
  8 * Copyright (c) 2004 Vojtech Pavlik
  9 * and Dan Streetman <ddstreet@ieee.org>
 10 */
 11
 
 
 
 
 
 12
 13/*
 14 * 2005/02/19 Rick Koch:
 15 *   The Touchwindow I used is made by Edmark Corp. and
 16 *   constantly outputs a stream of 0's unless it is touched.
 17 *   It then outputs 3 bytes: X, Y, and a copy of Y.
 18 */
 19
 20#include <linux/errno.h>
 21#include <linux/kernel.h>
 22#include <linux/module.h>
 23#include <linux/slab.h>
 24#include <linux/input.h>
 25#include <linux/serio.h>
 26
 27#define DRIVER_DESC	"Touchwindow serial touchscreen driver"
 28
 29MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
 30MODULE_DESCRIPTION(DRIVER_DESC);
 31MODULE_LICENSE("GPL");
 32
 33/*
 34 * Definitions & global arrays.
 35 */
 36
 37#define TW_LENGTH 3
 38
 39#define TW_MIN_XC 0
 40#define TW_MAX_XC 0xff
 41#define TW_MIN_YC 0
 42#define TW_MAX_YC 0xff
 43
 44/*
 45 * Per-touchscreen data.
 46 */
 47
 48struct tw {
 49	struct input_dev *dev;
 50	struct serio *serio;
 51	int idx;
 52	int touched;
 53	unsigned char data[TW_LENGTH];
 54	char phys[32];
 55};
 56
 57static irqreturn_t tw_interrupt(struct serio *serio,
 58		unsigned char data, unsigned int flags)
 59{
 60	struct tw *tw = serio_get_drvdata(serio);
 61	struct input_dev *dev = tw->dev;
 62
 63	if (data) {		/* touch */
 64		tw->touched = 1;
 65		tw->data[tw->idx++] = data;
 66		/* verify length and that the two Y's are the same */
 67		if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
 68			input_report_abs(dev, ABS_X, tw->data[0]);
 69			input_report_abs(dev, ABS_Y, tw->data[1]);
 70			input_report_key(dev, BTN_TOUCH, 1);
 71			input_sync(dev);
 72			tw->idx = 0;
 73		}
 74	} else if (tw->touched) {	/* untouch */
 75		input_report_key(dev, BTN_TOUCH, 0);
 76		input_sync(dev);
 77		tw->idx = 0;
 78		tw->touched = 0;
 79	}
 80
 81	return IRQ_HANDLED;
 82}
 83
 84/*
 85 * tw_disconnect() is the opposite of tw_connect()
 86 */
 87
 88static void tw_disconnect(struct serio *serio)
 89{
 90	struct tw *tw = serio_get_drvdata(serio);
 91
 92	input_get_device(tw->dev);
 93	input_unregister_device(tw->dev);
 94	serio_close(serio);
 95	serio_set_drvdata(serio, NULL);
 96	input_put_device(tw->dev);
 97	kfree(tw);
 98}
 99
100/*
101 * tw_connect() is the routine that is called when someone adds a
102 * new serio device that supports the Touchwin protocol and registers it as
103 * an input device.
104 */
105
106static int tw_connect(struct serio *serio, struct serio_driver *drv)
107{
108	struct tw *tw;
109	struct input_dev *input_dev;
110	int err;
111
112	tw = kzalloc(sizeof(struct tw), GFP_KERNEL);
113	input_dev = input_allocate_device();
114	if (!tw || !input_dev) {
115		err = -ENOMEM;
116		goto fail1;
117	}
118
119	tw->serio = serio;
120	tw->dev = input_dev;
121	snprintf(tw->phys, sizeof(tw->phys), "%s/input0", serio->phys);
122
123	input_dev->name = "Touchwindow Serial TouchScreen";
124	input_dev->phys = tw->phys;
125	input_dev->id.bustype = BUS_RS232;
126	input_dev->id.vendor = SERIO_TOUCHWIN;
127	input_dev->id.product = 0;
128	input_dev->id.version = 0x0100;
129	input_dev->dev.parent = &serio->dev;
130	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
131	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
132	input_set_abs_params(tw->dev, ABS_X, TW_MIN_XC, TW_MAX_XC, 0, 0);
133	input_set_abs_params(tw->dev, ABS_Y, TW_MIN_YC, TW_MAX_YC, 0, 0);
134
135	serio_set_drvdata(serio, tw);
136
137	err = serio_open(serio, drv);
138	if (err)
139		goto fail2;
140
141	err = input_register_device(tw->dev);
142	if (err)
143		goto fail3;
144
145	return 0;
146
147 fail3:	serio_close(serio);
148 fail2:	serio_set_drvdata(serio, NULL);
149 fail1:	input_free_device(input_dev);
150	kfree(tw);
151	return err;
152}
153
154/*
155 * The serio driver structure.
156 */
157
158static const struct serio_device_id tw_serio_ids[] = {
159	{
160		.type	= SERIO_RS232,
161		.proto	= SERIO_TOUCHWIN,
162		.id	= SERIO_ANY,
163		.extra	= SERIO_ANY,
164	},
165	{ 0 }
166};
167
168MODULE_DEVICE_TABLE(serio, tw_serio_ids);
169
170static struct serio_driver tw_drv = {
171	.driver		= {
172		.name	= "touchwin",
173	},
174	.description	= DRIVER_DESC,
175	.id_table	= tw_serio_ids,
176	.interrupt	= tw_interrupt,
177	.connect	= tw_connect,
178	.disconnect	= tw_disconnect,
179};
180
181module_serio_driver(tw_drv);