1#
 2# Makefile for the linux kernel.
 3#
 4
 5# Common support
 6obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
 7	 serial.o devices.o dma.o fb.o
 8obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
 9
10ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
11obj-y += mcbsp.o
12endif
13
14obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
15
16# OCPI interconnect support for 1710, 1610 and 5912
17obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
18
19# Power Management
20obj-$(CONFIG_PM) += pm.o sleep.o
21
22i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
23obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
24
25led-y := leds.o
26
27usb-fs-$(CONFIG_USB)			:= usb.o
28obj-y					+= $(usb-fs-m) $(usb-fs-y)
29
30# Specific board support
31obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o \
32					   board-nand.o
33obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
34obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
35obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o board-nand.o
36obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
37obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
38obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
39					   board-nand.o
40obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
41obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
42obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
43obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
44obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
45obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o ams-delta-fiq.o \
46					   ams-delta-fiq-handler.o
47obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
48obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
49
50ifeq ($(CONFIG_ARCH_OMAP15XX),y)
51# Innovator-1510 FPGA
52obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
53endif
54
55# GPIO
56obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
57obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
58obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
59obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
60
61ifneq ($(CONFIG_FB_OMAP),)
62obj-y += lcd_dma.o
63endif

 1# SPDX-License-Identifier: GPL-2.0
 2#
 3# Makefile for the linux kernel.
 4#
 5
 6# Common support
 7obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
 8	 serial.o devices.o dma.o omap-dma.o fb.o
 9obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
10
11ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),)
12obj-y += mcbsp.o
13endif
14
15obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
16
17# OCPI interconnect support for 1710, 1610 and 5912
18obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
19
20# Power Management
21obj-$(CONFIG_PM) += pm.o sleep.o
22
23i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
24obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
25
26led-y := leds.o
27
28usb-fs-$(CONFIG_USB_SUPPORT)		:= usb.o
29obj-y					+= $(usb-fs-m) $(usb-fs-y)
30
31# Specific board support
 
 
 
 
 
 
32obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
 
 
 
33obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 
 
34obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
35obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o ams-delta-fiq.o \
36					   ams-delta-fiq-handler.o
37obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
 
 
 
 
 
 
38
39# GPIO
 
 
40obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
41obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o