Loading...
1/*
2 * Simple "CDC Subset" USB Networking Links
3 * Copyright (C) 2000-2005 by David Brownell
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, see <http://www.gnu.org/licenses/>.
17 */
18
19#include <linux/module.h>
20#include <linux/kmod.h>
21#include <linux/netdevice.h>
22#include <linux/etherdevice.h>
23#include <linux/ethtool.h>
24#include <linux/workqueue.h>
25#include <linux/mii.h>
26#include <linux/usb.h>
27#include <linux/usb/usbnet.h>
28
29
30/*
31 * This supports simple USB network links that don't require any special
32 * framing or hardware control operations. The protocol used here is a
33 * strict subset of CDC Ethernet, with three basic differences reflecting
34 * the goal that almost any hardware should run it:
35 *
36 * - Minimal runtime control: one interface, no altsettings, and
37 * no vendor or class specific control requests. If a device is
38 * configured, it is allowed to exchange packets with the host.
39 * Fancier models would mean not working on some hardware.
40 *
41 * - Minimal manufacturing control: no IEEE "Organizationally
42 * Unique ID" required, or an EEPROMs to store one. Each host uses
43 * one random "locally assigned" Ethernet address instead, which can
44 * of course be overridden using standard tools like "ifconfig".
45 * (With 2^46 such addresses, same-net collisions are quite rare.)
46 *
47 * - There is no additional framing data for USB. Packets are written
48 * exactly as in CDC Ethernet, starting with an Ethernet header and
49 * terminated by a short packet. However, the host will never send a
50 * zero length packet; some systems can't handle those robustly.
51 *
52 * Anything that can transmit and receive USB bulk packets can implement
53 * this protocol. That includes both smart peripherals and quite a lot
54 * of "host-to-host" USB cables (which embed two devices back-to-back).
55 *
56 * Note that although Linux may use many of those host-to-host links
57 * with this "cdc_subset" framing, that doesn't mean there may not be a
58 * better approach. Handling the "other end unplugs/replugs" scenario
59 * well tends to require chip-specific vendor requests. Also, Windows
60 * peers at the other end of host-to-host cables may expect their own
61 * framing to be used rather than this "cdc_subset" model.
62 */
63
64#if defined(CONFIG_USB_EPSON2888) || defined(CONFIG_USB_ARMLINUX)
65/* PDA style devices are always connected if present */
66static int always_connected (struct usbnet *dev)
67{
68 return 0;
69}
70#endif
71
72#ifdef CONFIG_USB_ALI_M5632
73#define HAVE_HARDWARE
74
75/*-------------------------------------------------------------------------
76 *
77 * ALi M5632 driver ... does high speed
78 *
79 * NOTE that the MS-Windows drivers for this chip use some funky and
80 * (naturally) undocumented 7-byte prefix to each packet, so this is a
81 * case where we don't currently interoperate. Also, once you unplug
82 * one end of the cable, you need to replug the other end too ... since
83 * chip docs are unavailable, there's no way to reset the relevant state
84 * short of a power cycle.
85 *
86 *-------------------------------------------------------------------------*/
87
88static const struct driver_info ali_m5632_info = {
89 .description = "ALi M5632",
90 .flags = FLAG_POINTTOPOINT,
91};
92
93#endif
94
95
96#ifdef CONFIG_USB_AN2720
97#define HAVE_HARDWARE
98
99/*-------------------------------------------------------------------------
100 *
101 * AnchorChips 2720 driver ... http://www.cypress.com
102 *
103 * This doesn't seem to have a way to detect whether the peer is
104 * connected, or need any reset handshaking. It's got pretty big
105 * internal buffers (handles most of a frame's worth of data).
106 * Chip data sheets don't describe any vendor control messages.
107 *
108 *-------------------------------------------------------------------------*/
109
110static const struct driver_info an2720_info = {
111 .description = "AnchorChips/Cypress 2720",
112 .flags = FLAG_POINTTOPOINT,
113 // no reset available!
114 // no check_connect available!
115
116 .in = 2, .out = 2, // direction distinguishes these
117};
118
119#endif /* CONFIG_USB_AN2720 */
120
121
122#ifdef CONFIG_USB_BELKIN
123#define HAVE_HARDWARE
124
125/*-------------------------------------------------------------------------
126 *
127 * Belkin F5U104 ... two NetChip 2280 devices + Atmel AVR microcontroller
128 *
129 * ... also two eTEK designs, including one sold as "Advance USBNET"
130 *
131 *-------------------------------------------------------------------------*/
132
133static const struct driver_info belkin_info = {
134 .description = "Belkin, eTEK, or compatible",
135 .flags = FLAG_POINTTOPOINT,
136};
137
138#endif /* CONFIG_USB_BELKIN */
139
140
141
142#ifdef CONFIG_USB_EPSON2888
143#define HAVE_HARDWARE
144
145/*-------------------------------------------------------------------------
146 *
147 * EPSON USB clients
148 *
149 * This is the same idea as Linux PDAs (below) except the firmware in the
150 * device might not be Tux-powered. Epson provides reference firmware that
151 * implements this interface. Product developers can reuse or modify that
152 * code, such as by using their own product and vendor codes.
153 *
154 * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
155 *
156 *-------------------------------------------------------------------------*/
157
158static const struct driver_info epson2888_info = {
159 .description = "Epson USB Device",
160 .check_connect = always_connected,
161 .flags = FLAG_POINTTOPOINT,
162
163 .in = 4, .out = 3,
164};
165
166#endif /* CONFIG_USB_EPSON2888 */
167
168
169/*-------------------------------------------------------------------------
170 *
171 * info from Jonathan McDowell <noodles@earth.li>
172 *
173 *-------------------------------------------------------------------------*/
174#ifdef CONFIG_USB_KC2190
175#define HAVE_HARDWARE
176static const struct driver_info kc2190_info = {
177 .description = "KC Technology KC-190",
178 .flags = FLAG_POINTTOPOINT,
179};
180#endif /* CONFIG_USB_KC2190 */
181
182
183#ifdef CONFIG_USB_ARMLINUX
184#define HAVE_HARDWARE
185
186/*-------------------------------------------------------------------------
187 *
188 * Intel's SA-1100 chip integrates basic USB support, and is used
189 * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
190 * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
191 * network using minimal USB framing data.
192 *
193 * This describes the driver currently in standard ARM Linux kernels.
194 * The Zaurus uses a different driver (see later).
195 *
196 * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
197 * and different USB endpoint numbering than the SA1100 devices. The
198 * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
199 * so we rely on the endpoint descriptors.
200 *
201 *-------------------------------------------------------------------------*/
202
203static const struct driver_info linuxdev_info = {
204 .description = "Linux Device",
205 .check_connect = always_connected,
206 .flags = FLAG_POINTTOPOINT,
207};
208
209static const struct driver_info yopy_info = {
210 .description = "Yopy",
211 .check_connect = always_connected,
212 .flags = FLAG_POINTTOPOINT,
213};
214
215static const struct driver_info blob_info = {
216 .description = "Boot Loader OBject",
217 .check_connect = always_connected,
218 .flags = FLAG_POINTTOPOINT,
219};
220
221#endif /* CONFIG_USB_ARMLINUX */
222
223
224/*-------------------------------------------------------------------------*/
225
226#ifndef HAVE_HARDWARE
227#warning You need to configure some hardware for this driver
228#endif
229
230/*
231 * chip vendor names won't normally be on the cables, and
232 * may not be on the device.
233 */
234
235static const struct usb_device_id products [] = {
236
237#ifdef CONFIG_USB_ALI_M5632
238{
239 USB_DEVICE (0x0402, 0x5632), // ALi defaults
240 .driver_info = (unsigned long) &ali_m5632_info,
241},
242{
243 USB_DEVICE (0x182d,0x207c), // SiteCom CN-124
244 .driver_info = (unsigned long) &ali_m5632_info,
245},
246#endif
247
248#ifdef CONFIG_USB_AN2720
249{
250 USB_DEVICE (0x0547, 0x2720), // AnchorChips defaults
251 .driver_info = (unsigned long) &an2720_info,
252}, {
253 USB_DEVICE (0x0547, 0x2727), // Xircom PGUNET
254 .driver_info = (unsigned long) &an2720_info,
255},
256#endif
257
258#ifdef CONFIG_USB_BELKIN
259{
260 USB_DEVICE (0x050d, 0x0004), // Belkin
261 .driver_info = (unsigned long) &belkin_info,
262}, {
263 USB_DEVICE (0x056c, 0x8100), // eTEK
264 .driver_info = (unsigned long) &belkin_info,
265}, {
266 USB_DEVICE (0x0525, 0x9901), // Advance USBNET (eTEK)
267 .driver_info = (unsigned long) &belkin_info,
268},
269#endif
270
271#ifdef CONFIG_USB_EPSON2888
272{
273 USB_DEVICE (0x0525, 0x2888), // EPSON USB client
274 .driver_info = (unsigned long) &epson2888_info,
275},
276#endif
277
278#ifdef CONFIG_USB_KC2190
279{
280 USB_DEVICE (0x050f, 0x0190), // KC-190
281 .driver_info = (unsigned long) &kc2190_info,
282},
283#endif
284
285#ifdef CONFIG_USB_ARMLINUX
286/*
287 * SA-1100 using standard ARM Linux kernels, or compatible.
288 * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
289 * The sa-1100 "usb-eth" driver handles the basic framing.
290 *
291 * PXA25x or PXA210 ... these use a "usb-eth" driver much like
292 * the sa1100 one, but hardware uses different endpoint numbers.
293 *
294 * Or the Linux "Ethernet" gadget on hardware that can't talk
295 * CDC Ethernet (e.g., no altsettings), in either of two modes:
296 * - acting just like the old "usb-eth" firmware, though
297 * the implementation is different
298 * - supporting RNDIS as the first/default configuration for
299 * MS-Windows interop; Linux needs to use the other config
300 */
301{
302 // 1183 = 0x049F, both used as hex values?
303 // Compaq "Itsy" vendor/product id
304 USB_DEVICE (0x049F, 0x505A), // usb-eth, or compatible
305 .driver_info = (unsigned long) &linuxdev_info,
306}, {
307 USB_DEVICE (0x0E7E, 0x1001), // G.Mate "Yopy"
308 .driver_info = (unsigned long) &yopy_info,
309}, {
310 USB_DEVICE (0x8086, 0x07d3), // "blob" bootloader
311 .driver_info = (unsigned long) &blob_info,
312}, {
313 USB_DEVICE (0x1286, 0x8001), // "blob" bootloader
314 .driver_info = (unsigned long) &blob_info,
315}, {
316 // Linux Ethernet/RNDIS gadget, mostly on PXA, second config
317 // e.g. Gumstix, current OpenZaurus, ... or anything else
318 // that just enables this gadget option.
319 USB_DEVICE (0x0525, 0xa4a2),
320 .driver_info = (unsigned long) &linuxdev_info,
321},
322#endif
323
324 { }, // END
325};
326MODULE_DEVICE_TABLE(usb, products);
327
328/*-------------------------------------------------------------------------*/
329
330static struct usb_driver cdc_subset_driver = {
331 .name = "cdc_subset",
332 .probe = usbnet_probe,
333 .suspend = usbnet_suspend,
334 .resume = usbnet_resume,
335 .disconnect = usbnet_disconnect,
336 .id_table = products,
337 .disable_hub_initiated_lpm = 1,
338};
339
340module_usb_driver(cdc_subset_driver);
341
342MODULE_AUTHOR("David Brownell");
343MODULE_DESCRIPTION("Simple 'CDC Subset' USB networking links");
344MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Simple "CDC Subset" USB Networking Links
4 * Copyright (C) 2000-2005 by David Brownell
5 */
6
7#include <linux/module.h>
8#include <linux/kmod.h>
9#include <linux/netdevice.h>
10#include <linux/etherdevice.h>
11#include <linux/ethtool.h>
12#include <linux/workqueue.h>
13#include <linux/mii.h>
14#include <linux/usb.h>
15#include <linux/usb/usbnet.h>
16
17
18/*
19 * This supports simple USB network links that don't require any special
20 * framing or hardware control operations. The protocol used here is a
21 * strict subset of CDC Ethernet, with three basic differences reflecting
22 * the goal that almost any hardware should run it:
23 *
24 * - Minimal runtime control: one interface, no altsettings, and
25 * no vendor or class specific control requests. If a device is
26 * configured, it is allowed to exchange packets with the host.
27 * Fancier models would mean not working on some hardware.
28 *
29 * - Minimal manufacturing control: no IEEE "Organizationally
30 * Unique ID" required, or an EEPROMs to store one. Each host uses
31 * one random "locally assigned" Ethernet address instead, which can
32 * of course be overridden using standard tools like "ifconfig".
33 * (With 2^46 such addresses, same-net collisions are quite rare.)
34 *
35 * - There is no additional framing data for USB. Packets are written
36 * exactly as in CDC Ethernet, starting with an Ethernet header and
37 * terminated by a short packet. However, the host will never send a
38 * zero length packet; some systems can't handle those robustly.
39 *
40 * Anything that can transmit and receive USB bulk packets can implement
41 * this protocol. That includes both smart peripherals and quite a lot
42 * of "host-to-host" USB cables (which embed two devices back-to-back).
43 *
44 * Note that although Linux may use many of those host-to-host links
45 * with this "cdc_subset" framing, that doesn't mean there may not be a
46 * better approach. Handling the "other end unplugs/replugs" scenario
47 * well tends to require chip-specific vendor requests. Also, Windows
48 * peers at the other end of host-to-host cables may expect their own
49 * framing to be used rather than this "cdc_subset" model.
50 */
51
52#if defined(CONFIG_USB_EPSON2888) || defined(CONFIG_USB_ARMLINUX)
53/* PDA style devices are always connected if present */
54static int always_connected (struct usbnet *dev)
55{
56 return 0;
57}
58#endif
59
60#ifdef CONFIG_USB_ALI_M5632
61#define HAVE_HARDWARE
62
63/*-------------------------------------------------------------------------
64 *
65 * ALi M5632 driver ... does high speed
66 *
67 * NOTE that the MS-Windows drivers for this chip use some funky and
68 * (naturally) undocumented 7-byte prefix to each packet, so this is a
69 * case where we don't currently interoperate. Also, once you unplug
70 * one end of the cable, you need to replug the other end too ... since
71 * chip docs are unavailable, there's no way to reset the relevant state
72 * short of a power cycle.
73 *
74 *-------------------------------------------------------------------------*/
75
76static void m5632_recover(struct usbnet *dev)
77{
78 struct usb_device *udev = dev->udev;
79 struct usb_interface *intf = dev->intf;
80 int r;
81
82 r = usb_lock_device_for_reset(udev, intf);
83 if (r < 0)
84 return;
85
86 usb_reset_device(udev);
87 usb_unlock_device(udev);
88}
89
90static const struct driver_info ali_m5632_info = {
91 .description = "ALi M5632",
92 .flags = FLAG_POINTTOPOINT,
93 .recover = m5632_recover,
94};
95
96#endif
97
98#ifdef CONFIG_USB_AN2720
99#define HAVE_HARDWARE
100
101/*-------------------------------------------------------------------------
102 *
103 * AnchorChips 2720 driver ... http://www.cypress.com
104 *
105 * This doesn't seem to have a way to detect whether the peer is
106 * connected, or need any reset handshaking. It's got pretty big
107 * internal buffers (handles most of a frame's worth of data).
108 * Chip data sheets don't describe any vendor control messages.
109 *
110 *-------------------------------------------------------------------------*/
111
112static const struct driver_info an2720_info = {
113 .description = "AnchorChips/Cypress 2720",
114 .flags = FLAG_POINTTOPOINT,
115 // no reset available!
116 // no check_connect available!
117
118 .in = 2, .out = 2, // direction distinguishes these
119};
120
121#endif /* CONFIG_USB_AN2720 */
122
123
124#ifdef CONFIG_USB_BELKIN
125#define HAVE_HARDWARE
126
127/*-------------------------------------------------------------------------
128 *
129 * Belkin F5U104 ... two NetChip 2280 devices + Atmel AVR microcontroller
130 *
131 * ... also two eTEK designs, including one sold as "Advance USBNET"
132 *
133 *-------------------------------------------------------------------------*/
134
135static const struct driver_info belkin_info = {
136 .description = "Belkin, eTEK, or compatible",
137 .flags = FLAG_POINTTOPOINT,
138};
139
140#endif /* CONFIG_USB_BELKIN */
141
142
143
144#ifdef CONFIG_USB_EPSON2888
145#define HAVE_HARDWARE
146
147/*-------------------------------------------------------------------------
148 *
149 * EPSON USB clients
150 *
151 * This is the same idea as Linux PDAs (below) except the firmware in the
152 * device might not be Tux-powered. Epson provides reference firmware that
153 * implements this interface. Product developers can reuse or modify that
154 * code, such as by using their own product and vendor codes.
155 *
156 * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
157 *
158 *-------------------------------------------------------------------------*/
159
160static const struct driver_info epson2888_info = {
161 .description = "Epson USB Device",
162 .check_connect = always_connected,
163 .flags = FLAG_POINTTOPOINT,
164
165 .in = 4, .out = 3,
166};
167
168#endif /* CONFIG_USB_EPSON2888 */
169
170
171/*-------------------------------------------------------------------------
172 *
173 * info from Jonathan McDowell <noodles@earth.li>
174 *
175 *-------------------------------------------------------------------------*/
176#ifdef CONFIG_USB_KC2190
177#define HAVE_HARDWARE
178static const struct driver_info kc2190_info = {
179 .description = "KC Technology KC-190",
180 .flags = FLAG_POINTTOPOINT,
181};
182#endif /* CONFIG_USB_KC2190 */
183
184
185#ifdef CONFIG_USB_ARMLINUX
186#define HAVE_HARDWARE
187
188/*-------------------------------------------------------------------------
189 *
190 * Intel's SA-1100 chip integrates basic USB support, and is used
191 * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
192 * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
193 * network using minimal USB framing data.
194 *
195 * This describes the driver currently in standard ARM Linux kernels.
196 * The Zaurus uses a different driver (see later).
197 *
198 * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
199 * and different USB endpoint numbering than the SA1100 devices. The
200 * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
201 * so we rely on the endpoint descriptors.
202 *
203 *-------------------------------------------------------------------------*/
204
205static const struct driver_info linuxdev_info = {
206 .description = "Linux Device",
207 .check_connect = always_connected,
208 .flags = FLAG_POINTTOPOINT,
209};
210
211static const struct driver_info yopy_info = {
212 .description = "Yopy",
213 .check_connect = always_connected,
214 .flags = FLAG_POINTTOPOINT,
215};
216
217static const struct driver_info blob_info = {
218 .description = "Boot Loader OBject",
219 .check_connect = always_connected,
220 .flags = FLAG_POINTTOPOINT,
221};
222
223#endif /* CONFIG_USB_ARMLINUX */
224
225
226/*-------------------------------------------------------------------------*/
227
228#ifndef HAVE_HARDWARE
229#warning You need to configure some hardware for this driver
230#endif
231
232/*
233 * chip vendor names won't normally be on the cables, and
234 * may not be on the device.
235 */
236
237static const struct usb_device_id products [] = {
238
239#ifdef CONFIG_USB_ALI_M5632
240{
241 USB_DEVICE (0x0402, 0x5632), // ALi defaults
242 .driver_info = (unsigned long) &ali_m5632_info,
243},
244{
245 USB_DEVICE (0x182d,0x207c), // SiteCom CN-124
246 .driver_info = (unsigned long) &ali_m5632_info,
247},
248#endif
249
250#ifdef CONFIG_USB_AN2720
251{
252 USB_DEVICE (0x0547, 0x2720), // AnchorChips defaults
253 .driver_info = (unsigned long) &an2720_info,
254}, {
255 USB_DEVICE (0x0547, 0x2727), // Xircom PGUNET
256 .driver_info = (unsigned long) &an2720_info,
257},
258#endif
259
260#ifdef CONFIG_USB_BELKIN
261{
262 USB_DEVICE (0x050d, 0x0004), // Belkin
263 .driver_info = (unsigned long) &belkin_info,
264}, {
265 USB_DEVICE (0x056c, 0x8100), // eTEK
266 .driver_info = (unsigned long) &belkin_info,
267}, {
268 USB_DEVICE (0x0525, 0x9901), // Advance USBNET (eTEK)
269 .driver_info = (unsigned long) &belkin_info,
270},
271#endif
272
273#ifdef CONFIG_USB_EPSON2888
274{
275 USB_DEVICE (0x0525, 0x2888), // EPSON USB client
276 .driver_info = (unsigned long) &epson2888_info,
277},
278#endif
279
280#ifdef CONFIG_USB_KC2190
281{
282 USB_DEVICE (0x050f, 0x0190), // KC-190
283 .driver_info = (unsigned long) &kc2190_info,
284},
285#endif
286
287#ifdef CONFIG_USB_ARMLINUX
288/*
289 * SA-1100 using standard ARM Linux kernels, or compatible.
290 * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
291 * The sa-1100 "usb-eth" driver handles the basic framing.
292 *
293 * PXA25x or PXA210 ... these use a "usb-eth" driver much like
294 * the sa1100 one, but hardware uses different endpoint numbers.
295 *
296 * Or the Linux "Ethernet" gadget on hardware that can't talk
297 * CDC Ethernet (e.g., no altsettings), in either of two modes:
298 * - acting just like the old "usb-eth" firmware, though
299 * the implementation is different
300 * - supporting RNDIS as the first/default configuration for
301 * MS-Windows interop; Linux needs to use the other config
302 */
303{
304 // 1183 = 0x049F, both used as hex values?
305 // Compaq "Itsy" vendor/product id
306 USB_DEVICE (0x049F, 0x505A), // usb-eth, or compatible
307 .driver_info = (unsigned long) &linuxdev_info,
308}, {
309 USB_DEVICE (0x0E7E, 0x1001), // G.Mate "Yopy"
310 .driver_info = (unsigned long) &yopy_info,
311}, {
312 USB_DEVICE (0x8086, 0x07d3), // "blob" bootloader
313 .driver_info = (unsigned long) &blob_info,
314}, {
315 USB_DEVICE (0x1286, 0x8001), // "blob" bootloader
316 .driver_info = (unsigned long) &blob_info,
317}, {
318 // Linux Ethernet/RNDIS gadget, mostly on PXA, second config
319 // e.g. Gumstix, current OpenZaurus, ... or anything else
320 // that just enables this gadget option.
321 USB_DEVICE (0x0525, 0xa4a2),
322 .driver_info = (unsigned long) &linuxdev_info,
323},
324#endif
325
326 { }, // END
327};
328MODULE_DEVICE_TABLE(usb, products);
329
330/*-------------------------------------------------------------------------*/
331static int dummy_prereset(struct usb_interface *intf)
332{
333 return 0;
334}
335
336static int dummy_postreset(struct usb_interface *intf)
337{
338 return 0;
339}
340
341static struct usb_driver cdc_subset_driver = {
342 .name = "cdc_subset",
343 .probe = usbnet_probe,
344 .suspend = usbnet_suspend,
345 .resume = usbnet_resume,
346 .pre_reset = dummy_prereset,
347 .post_reset = dummy_postreset,
348 .disconnect = usbnet_disconnect,
349 .id_table = products,
350 .disable_hub_initiated_lpm = 1,
351};
352
353module_usb_driver(cdc_subset_driver);
354
355MODULE_AUTHOR("David Brownell");
356MODULE_DESCRIPTION("Simple 'CDC Subset' USB networking links");
357MODULE_LICENSE("GPL");