Loading...
1/*
2 * xHCI host controller driver
3 *
4 * Copyright (C) 2008 Intel Corp.
5 *
6 * Author: Sarah Sharp
7 * Some code borrowed from the Linux EHCI driver.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
16 * for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software Foundation,
20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23/*
24 * Ring initialization rules:
25 * 1. Each segment is initialized to zero, except for link TRBs.
26 * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or
27 * Consumer Cycle State (CCS), depending on ring function.
28 * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
29 *
30 * Ring behavior rules:
31 * 1. A ring is empty if enqueue == dequeue. This means there will always be at
32 * least one free TRB in the ring. This is useful if you want to turn that
33 * into a link TRB and expand the ring.
34 * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
35 * link TRB, then load the pointer with the address in the link TRB. If the
36 * link TRB had its toggle bit set, you may need to update the ring cycle
37 * state (see cycle bit rules). You may have to do this multiple times
38 * until you reach a non-link TRB.
39 * 3. A ring is full if enqueue++ (for the definition of increment above)
40 * equals the dequeue pointer.
41 *
42 * Cycle bit rules:
43 * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
44 * in a link TRB, it must toggle the ring cycle state.
45 * 2. When a producer increments an enqueue pointer and encounters a toggle bit
46 * in a link TRB, it must toggle the ring cycle state.
47 *
48 * Producer rules:
49 * 1. Check if ring is full before you enqueue.
50 * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
51 * Update enqueue pointer between each write (which may update the ring
52 * cycle state).
53 * 3. Notify consumer. If SW is producer, it rings the doorbell for command
54 * and endpoint rings. If HC is the producer for the event ring,
55 * and it generates an interrupt according to interrupt modulation rules.
56 *
57 * Consumer rules:
58 * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state,
59 * the TRB is owned by the consumer.
60 * 2. Update dequeue pointer (which may update the ring cycle state) and
61 * continue processing TRBs until you reach a TRB which is not owned by you.
62 * 3. Notify the producer. SW is the consumer for the event ring, and it
63 * updates event ring dequeue pointer. HC is the consumer for the command and
64 * endpoint rings; it generates events on the event ring for these.
65 */
66
67#include <linux/scatterlist.h>
68#include <linux/slab.h>
69#include "xhci.h"
70#include "xhci-trace.h"
71
72static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
73 struct xhci_virt_device *virt_dev,
74 struct xhci_event_cmd *event);
75
76/*
77 * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
78 * address of the TRB.
79 */
80dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
81 union xhci_trb *trb)
82{
83 unsigned long segment_offset;
84
85 if (!seg || !trb || trb < seg->trbs)
86 return 0;
87 /* offset in TRBs */
88 segment_offset = trb - seg->trbs;
89 if (segment_offset > TRBS_PER_SEGMENT)
90 return 0;
91 return seg->dma + (segment_offset * sizeof(*trb));
92}
93
94/* Does this link TRB point to the first segment in a ring,
95 * or was the previous TRB the last TRB on the last segment in the ERST?
96 */
97static bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring,
98 struct xhci_segment *seg, union xhci_trb *trb)
99{
100 if (ring == xhci->event_ring)
101 return (trb == &seg->trbs[TRBS_PER_SEGMENT]) &&
102 (seg->next == xhci->event_ring->first_seg);
103 else
104 return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
105}
106
107/* Is this TRB a link TRB or was the last TRB the last TRB in this event ring
108 * segment? I.e. would the updated event TRB pointer step off the end of the
109 * event seg?
110 */
111static int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
112 struct xhci_segment *seg, union xhci_trb *trb)
113{
114 if (ring == xhci->event_ring)
115 return trb == &seg->trbs[TRBS_PER_SEGMENT];
116 else
117 return TRB_TYPE_LINK_LE32(trb->link.control);
118}
119
120static int enqueue_is_link_trb(struct xhci_ring *ring)
121{
122 struct xhci_link_trb *link = &ring->enqueue->link;
123 return TRB_TYPE_LINK_LE32(link->control);
124}
125
126union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring)
127{
128 /* Enqueue pointer can be left pointing to the link TRB,
129 * we must handle that
130 */
131 if (TRB_TYPE_LINK_LE32(ring->enqueue->link.control))
132 return ring->enq_seg->next->trbs;
133 return ring->enqueue;
134}
135
136/* Updates trb to point to the next TRB in the ring, and updates seg if the next
137 * TRB is in a new segment. This does not skip over link TRBs, and it does not
138 * effect the ring dequeue or enqueue pointers.
139 */
140static void next_trb(struct xhci_hcd *xhci,
141 struct xhci_ring *ring,
142 struct xhci_segment **seg,
143 union xhci_trb **trb)
144{
145 if (last_trb(xhci, ring, *seg, *trb)) {
146 *seg = (*seg)->next;
147 *trb = ((*seg)->trbs);
148 } else {
149 (*trb)++;
150 }
151}
152
153/*
154 * See Cycle bit rules. SW is the consumer for the event ring only.
155 * Don't make a ring full of link TRBs. That would be dumb and this would loop.
156 */
157static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring)
158{
159 ring->deq_updates++;
160
161 /*
162 * If this is not event ring, and the dequeue pointer
163 * is not on a link TRB, there is one more usable TRB
164 */
165 if (ring->type != TYPE_EVENT &&
166 !last_trb(xhci, ring, ring->deq_seg, ring->dequeue))
167 ring->num_trbs_free++;
168
169 do {
170 /*
171 * Update the dequeue pointer further if that was a link TRB or
172 * we're at the end of an event ring segment (which doesn't have
173 * link TRBS)
174 */
175 if (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) {
176 if (ring->type == TYPE_EVENT &&
177 last_trb_on_last_seg(xhci, ring,
178 ring->deq_seg, ring->dequeue)) {
179 ring->cycle_state ^= 1;
180 }
181 ring->deq_seg = ring->deq_seg->next;
182 ring->dequeue = ring->deq_seg->trbs;
183 } else {
184 ring->dequeue++;
185 }
186 } while (last_trb(xhci, ring, ring->deq_seg, ring->dequeue));
187}
188
189/*
190 * See Cycle bit rules. SW is the consumer for the event ring only.
191 * Don't make a ring full of link TRBs. That would be dumb and this would loop.
192 *
193 * If we've just enqueued a TRB that is in the middle of a TD (meaning the
194 * chain bit is set), then set the chain bit in all the following link TRBs.
195 * If we've enqueued the last TRB in a TD, make sure the following link TRBs
196 * have their chain bit cleared (so that each Link TRB is a separate TD).
197 *
198 * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
199 * set, but other sections talk about dealing with the chain bit set. This was
200 * fixed in the 0.96 specification errata, but we have to assume that all 0.95
201 * xHCI hardware can't handle the chain bit being cleared on a link TRB.
202 *
203 * @more_trbs_coming: Will you enqueue more TRBs before calling
204 * prepare_transfer()?
205 */
206static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
207 bool more_trbs_coming)
208{
209 u32 chain;
210 union xhci_trb *next;
211
212 chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
213 /* If this is not event ring, there is one less usable TRB */
214 if (ring->type != TYPE_EVENT &&
215 !last_trb(xhci, ring, ring->enq_seg, ring->enqueue))
216 ring->num_trbs_free--;
217 next = ++(ring->enqueue);
218
219 ring->enq_updates++;
220 /* Update the dequeue pointer further if that was a link TRB or we're at
221 * the end of an event ring segment (which doesn't have link TRBS)
222 */
223 while (last_trb(xhci, ring, ring->enq_seg, next)) {
224 if (ring->type != TYPE_EVENT) {
225 /*
226 * If the caller doesn't plan on enqueueing more
227 * TDs before ringing the doorbell, then we
228 * don't want to give the link TRB to the
229 * hardware just yet. We'll give the link TRB
230 * back in prepare_ring() just before we enqueue
231 * the TD at the top of the ring.
232 */
233 if (!chain && !more_trbs_coming)
234 break;
235
236 /* If we're not dealing with 0.95 hardware or
237 * isoc rings on AMD 0.96 host,
238 * carry over the chain bit of the previous TRB
239 * (which may mean the chain bit is cleared).
240 */
241 if (!(ring->type == TYPE_ISOC &&
242 (xhci->quirks & XHCI_AMD_0x96_HOST))
243 && !xhci_link_trb_quirk(xhci)) {
244 next->link.control &=
245 cpu_to_le32(~TRB_CHAIN);
246 next->link.control |=
247 cpu_to_le32(chain);
248 }
249 /* Give this link TRB to the hardware */
250 wmb();
251 next->link.control ^= cpu_to_le32(TRB_CYCLE);
252
253 /* Toggle the cycle bit after the last ring segment. */
254 if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
255 ring->cycle_state = (ring->cycle_state ? 0 : 1);
256 }
257 }
258 ring->enq_seg = ring->enq_seg->next;
259 ring->enqueue = ring->enq_seg->trbs;
260 next = ring->enqueue;
261 }
262}
263
264/*
265 * Check to see if there's room to enqueue num_trbs on the ring and make sure
266 * enqueue pointer will not advance into dequeue segment. See rules above.
267 */
268static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
269 unsigned int num_trbs)
270{
271 int num_trbs_in_deq_seg;
272
273 if (ring->num_trbs_free < num_trbs)
274 return 0;
275
276 if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
277 num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
278 if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
279 return 0;
280 }
281
282 return 1;
283}
284
285/* Ring the host controller doorbell after placing a command on the ring */
286void xhci_ring_cmd_db(struct xhci_hcd *xhci)
287{
288 if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING))
289 return;
290
291 xhci_dbg(xhci, "// Ding dong!\n");
292 writel(DB_VALUE_HOST, &xhci->dba->doorbell[0]);
293 /* Flush PCI posted writes */
294 readl(&xhci->dba->doorbell[0]);
295}
296
297static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
298{
299 u64 temp_64;
300 int ret;
301
302 xhci_dbg(xhci, "Abort command ring\n");
303
304 if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING)) {
305 xhci_dbg(xhci, "The command ring isn't running, "
306 "Have the command ring been stopped?\n");
307 return 0;
308 }
309
310 temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
311 if (!(temp_64 & CMD_RING_RUNNING)) {
312 xhci_dbg(xhci, "Command ring had been stopped\n");
313 return 0;
314 }
315 xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
316 xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
317 &xhci->op_regs->cmd_ring);
318
319 /* Section 4.6.1.2 of xHCI 1.0 spec says software should
320 * time the completion od all xHCI commands, including
321 * the Command Abort operation. If software doesn't see
322 * CRR negated in a timely manner (e.g. longer than 5
323 * seconds), then it should assume that the there are
324 * larger problems with the xHC and assert HCRST.
325 */
326 ret = xhci_handshake(xhci, &xhci->op_regs->cmd_ring,
327 CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
328 if (ret < 0) {
329 xhci_err(xhci, "Stopped the command ring failed, "
330 "maybe the host is dead\n");
331 xhci->xhc_state |= XHCI_STATE_DYING;
332 xhci_quiesce(xhci);
333 xhci_halt(xhci);
334 return -ESHUTDOWN;
335 }
336
337 return 0;
338}
339
340static int xhci_queue_cd(struct xhci_hcd *xhci,
341 struct xhci_command *command,
342 union xhci_trb *cmd_trb)
343{
344 struct xhci_cd *cd;
345 cd = kzalloc(sizeof(struct xhci_cd), GFP_ATOMIC);
346 if (!cd)
347 return -ENOMEM;
348 INIT_LIST_HEAD(&cd->cancel_cmd_list);
349
350 cd->command = command;
351 cd->cmd_trb = cmd_trb;
352 list_add_tail(&cd->cancel_cmd_list, &xhci->cancel_cmd_list);
353
354 return 0;
355}
356
357/*
358 * Cancel the command which has issue.
359 *
360 * Some commands may hang due to waiting for acknowledgement from
361 * usb device. It is outside of the xHC's ability to control and
362 * will cause the command ring is blocked. When it occurs software
363 * should intervene to recover the command ring.
364 * See Section 4.6.1.1 and 4.6.1.2
365 */
366int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
367 union xhci_trb *cmd_trb)
368{
369 int retval = 0;
370 unsigned long flags;
371
372 spin_lock_irqsave(&xhci->lock, flags);
373
374 if (xhci->xhc_state & XHCI_STATE_DYING) {
375 xhci_warn(xhci, "Abort the command ring,"
376 " but the xHCI is dead.\n");
377 retval = -ESHUTDOWN;
378 goto fail;
379 }
380
381 /* queue the cmd desriptor to cancel_cmd_list */
382 retval = xhci_queue_cd(xhci, command, cmd_trb);
383 if (retval) {
384 xhci_warn(xhci, "Queuing command descriptor failed.\n");
385 goto fail;
386 }
387
388 /* abort command ring */
389 retval = xhci_abort_cmd_ring(xhci);
390 if (retval) {
391 xhci_err(xhci, "Abort command ring failed\n");
392 if (unlikely(retval == -ESHUTDOWN)) {
393 spin_unlock_irqrestore(&xhci->lock, flags);
394 usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
395 xhci_dbg(xhci, "xHCI host controller is dead.\n");
396 return retval;
397 }
398 }
399
400fail:
401 spin_unlock_irqrestore(&xhci->lock, flags);
402 return retval;
403}
404
405void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
406 unsigned int slot_id,
407 unsigned int ep_index,
408 unsigned int stream_id)
409{
410 __le32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
411 struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
412 unsigned int ep_state = ep->ep_state;
413
414 /* Don't ring the doorbell for this endpoint if there are pending
415 * cancellations because we don't want to interrupt processing.
416 * We don't want to restart any stream rings if there's a set dequeue
417 * pointer command pending because the device can choose to start any
418 * stream once the endpoint is on the HW schedule.
419 * FIXME - check all the stream rings for pending cancellations.
420 */
421 if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) ||
422 (ep_state & EP_HALTED))
423 return;
424 writel(DB_VALUE(ep_index, stream_id), db_addr);
425 /* The CPU has better things to do at this point than wait for a
426 * write-posting flush. It'll get there soon enough.
427 */
428}
429
430/* Ring the doorbell for any rings with pending URBs */
431static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
432 unsigned int slot_id,
433 unsigned int ep_index)
434{
435 unsigned int stream_id;
436 struct xhci_virt_ep *ep;
437
438 ep = &xhci->devs[slot_id]->eps[ep_index];
439
440 /* A ring has pending URBs if its TD list is not empty */
441 if (!(ep->ep_state & EP_HAS_STREAMS)) {
442 if (ep->ring && !(list_empty(&ep->ring->td_list)))
443 xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0);
444 return;
445 }
446
447 for (stream_id = 1; stream_id < ep->stream_info->num_streams;
448 stream_id++) {
449 struct xhci_stream_info *stream_info = ep->stream_info;
450 if (!list_empty(&stream_info->stream_rings[stream_id]->td_list))
451 xhci_ring_ep_doorbell(xhci, slot_id, ep_index,
452 stream_id);
453 }
454}
455
456/*
457 * Find the segment that trb is in. Start searching in start_seg.
458 * If we must move past a segment that has a link TRB with a toggle cycle state
459 * bit set, then we will toggle the value pointed at by cycle_state.
460 */
461static struct xhci_segment *find_trb_seg(
462 struct xhci_segment *start_seg,
463 union xhci_trb *trb, int *cycle_state)
464{
465 struct xhci_segment *cur_seg = start_seg;
466 struct xhci_generic_trb *generic_trb;
467
468 while (cur_seg->trbs > trb ||
469 &cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
470 generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic;
471 if (generic_trb->field[3] & cpu_to_le32(LINK_TOGGLE))
472 *cycle_state ^= 0x1;
473 cur_seg = cur_seg->next;
474 if (cur_seg == start_seg)
475 /* Looped over the entire list. Oops! */
476 return NULL;
477 }
478 return cur_seg;
479}
480
481
482static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
483 unsigned int slot_id, unsigned int ep_index,
484 unsigned int stream_id)
485{
486 struct xhci_virt_ep *ep;
487
488 ep = &xhci->devs[slot_id]->eps[ep_index];
489 /* Common case: no streams */
490 if (!(ep->ep_state & EP_HAS_STREAMS))
491 return ep->ring;
492
493 if (stream_id == 0) {
494 xhci_warn(xhci,
495 "WARN: Slot ID %u, ep index %u has streams, "
496 "but URB has no stream ID.\n",
497 slot_id, ep_index);
498 return NULL;
499 }
500
501 if (stream_id < ep->stream_info->num_streams)
502 return ep->stream_info->stream_rings[stream_id];
503
504 xhci_warn(xhci,
505 "WARN: Slot ID %u, ep index %u has "
506 "stream IDs 1 to %u allocated, "
507 "but stream ID %u is requested.\n",
508 slot_id, ep_index,
509 ep->stream_info->num_streams - 1,
510 stream_id);
511 return NULL;
512}
513
514/* Get the right ring for the given URB.
515 * If the endpoint supports streams, boundary check the URB's stream ID.
516 * If the endpoint doesn't support streams, return the singular endpoint ring.
517 */
518static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
519 struct urb *urb)
520{
521 return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
522 xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id);
523}
524
525/*
526 * Move the xHC's endpoint ring dequeue pointer past cur_td.
527 * Record the new state of the xHC's endpoint ring dequeue segment,
528 * dequeue pointer, and new consumer cycle state in state.
529 * Update our internal representation of the ring's dequeue pointer.
530 *
531 * We do this in three jumps:
532 * - First we update our new ring state to be the same as when the xHC stopped.
533 * - Then we traverse the ring to find the segment that contains
534 * the last TRB in the TD. We toggle the xHC's new cycle state when we pass
535 * any link TRBs with the toggle cycle bit set.
536 * - Finally we move the dequeue state one TRB further, toggling the cycle bit
537 * if we've moved it past a link TRB with the toggle cycle bit set.
538 *
539 * Some of the uses of xhci_generic_trb are grotty, but if they're done
540 * with correct __le32 accesses they should work fine. Only users of this are
541 * in here.
542 */
543void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
544 unsigned int slot_id, unsigned int ep_index,
545 unsigned int stream_id, struct xhci_td *cur_td,
546 struct xhci_dequeue_state *state)
547{
548 struct xhci_virt_device *dev = xhci->devs[slot_id];
549 struct xhci_virt_ep *ep = &dev->eps[ep_index];
550 struct xhci_ring *ep_ring;
551 struct xhci_generic_trb *trb;
552 dma_addr_t addr;
553 u64 hw_dequeue;
554
555 ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
556 ep_index, stream_id);
557 if (!ep_ring) {
558 xhci_warn(xhci, "WARN can't find new dequeue state "
559 "for invalid stream ID %u.\n",
560 stream_id);
561 return;
562 }
563
564 /* Dig out the cycle state saved by the xHC during the stop ep cmd */
565 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
566 "Finding endpoint context");
567 /* 4.6.9 the css flag is written to the stream context for streams */
568 if (ep->ep_state & EP_HAS_STREAMS) {
569 struct xhci_stream_ctx *ctx =
570 &ep->stream_info->stream_ctx_array[stream_id];
571 hw_dequeue = le64_to_cpu(ctx->stream_ring);
572 } else {
573 struct xhci_ep_ctx *ep_ctx
574 = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
575 hw_dequeue = le64_to_cpu(ep_ctx->deq);
576 }
577
578 /* Find virtual address and segment of hardware dequeue pointer */
579 state->new_deq_seg = ep_ring->deq_seg;
580 state->new_deq_ptr = ep_ring->dequeue;
581 while (xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr)
582 != (dma_addr_t)(hw_dequeue & ~0xf)) {
583 next_trb(xhci, ep_ring, &state->new_deq_seg,
584 &state->new_deq_ptr);
585 if (state->new_deq_ptr == ep_ring->dequeue) {
586 WARN_ON(1);
587 return;
588 }
589 }
590 /*
591 * Find cycle state for last_trb, starting at old cycle state of
592 * hw_dequeue. If there is only one segment ring, find_trb_seg() will
593 * return immediately and cannot toggle the cycle state if this search
594 * wraps around, so add one more toggle manually in that case.
595 */
596 state->new_cycle_state = hw_dequeue & 0x1;
597 if (ep_ring->first_seg == ep_ring->first_seg->next &&
598 cur_td->last_trb < state->new_deq_ptr)
599 state->new_cycle_state ^= 0x1;
600
601 state->new_deq_ptr = cur_td->last_trb;
602 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
603 "Finding segment containing last TRB in TD.");
604 state->new_deq_seg = find_trb_seg(state->new_deq_seg,
605 state->new_deq_ptr, &state->new_cycle_state);
606 if (!state->new_deq_seg) {
607 WARN_ON(1);
608 return;
609 }
610
611 /* Increment to find next TRB after last_trb. Cycle if appropriate. */
612 trb = &state->new_deq_ptr->generic;
613 if (TRB_TYPE_LINK_LE32(trb->field[3]) &&
614 (trb->field[3] & cpu_to_le32(LINK_TOGGLE)))
615 state->new_cycle_state ^= 0x1;
616 next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
617
618 /* Don't update the ring cycle state for the producer (us). */
619 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
620 "Cycle state = 0x%x", state->new_cycle_state);
621
622 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
623 "New dequeue segment = %p (virtual)",
624 state->new_deq_seg);
625 addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
626 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
627 "New dequeue pointer = 0x%llx (DMA)",
628 (unsigned long long) addr);
629}
630
631/* flip_cycle means flip the cycle bit of all but the first and last TRB.
632 * (The last TRB actually points to the ring enqueue pointer, which is not part
633 * of this TD.) This is used to remove partially enqueued isoc TDs from a ring.
634 */
635static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
636 struct xhci_td *cur_td, bool flip_cycle)
637{
638 struct xhci_segment *cur_seg;
639 union xhci_trb *cur_trb;
640
641 for (cur_seg = cur_td->start_seg, cur_trb = cur_td->first_trb;
642 true;
643 next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
644 if (TRB_TYPE_LINK_LE32(cur_trb->generic.field[3])) {
645 /* Unchain any chained Link TRBs, but
646 * leave the pointers intact.
647 */
648 cur_trb->generic.field[3] &= cpu_to_le32(~TRB_CHAIN);
649 /* Flip the cycle bit (link TRBs can't be the first
650 * or last TRB).
651 */
652 if (flip_cycle)
653 cur_trb->generic.field[3] ^=
654 cpu_to_le32(TRB_CYCLE);
655 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
656 "Cancel (unchain) link TRB");
657 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
658 "Address = %p (0x%llx dma); "
659 "in seg %p (0x%llx dma)",
660 cur_trb,
661 (unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb),
662 cur_seg,
663 (unsigned long long)cur_seg->dma);
664 } else {
665 cur_trb->generic.field[0] = 0;
666 cur_trb->generic.field[1] = 0;
667 cur_trb->generic.field[2] = 0;
668 /* Preserve only the cycle bit of this TRB */
669 cur_trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE);
670 /* Flip the cycle bit except on the first or last TRB */
671 if (flip_cycle && cur_trb != cur_td->first_trb &&
672 cur_trb != cur_td->last_trb)
673 cur_trb->generic.field[3] ^=
674 cpu_to_le32(TRB_CYCLE);
675 cur_trb->generic.field[3] |= cpu_to_le32(
676 TRB_TYPE(TRB_TR_NOOP));
677 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
678 "TRB to noop at offset 0x%llx",
679 (unsigned long long)
680 xhci_trb_virt_to_dma(cur_seg, cur_trb));
681 }
682 if (cur_trb == cur_td->last_trb)
683 break;
684 }
685}
686
687static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
688 unsigned int ep_index, unsigned int stream_id,
689 struct xhci_segment *deq_seg,
690 union xhci_trb *deq_ptr, u32 cycle_state);
691
692void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
693 unsigned int slot_id, unsigned int ep_index,
694 unsigned int stream_id,
695 struct xhci_dequeue_state *deq_state)
696{
697 struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
698
699 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
700 "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
701 "new deq ptr = %p (0x%llx dma), new cycle = %u",
702 deq_state->new_deq_seg,
703 (unsigned long long)deq_state->new_deq_seg->dma,
704 deq_state->new_deq_ptr,
705 (unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr),
706 deq_state->new_cycle_state);
707 queue_set_tr_deq(xhci, slot_id, ep_index, stream_id,
708 deq_state->new_deq_seg,
709 deq_state->new_deq_ptr,
710 (u32) deq_state->new_cycle_state);
711 /* Stop the TD queueing code from ringing the doorbell until
712 * this command completes. The HC won't set the dequeue pointer
713 * if the ring is running, and ringing the doorbell starts the
714 * ring running.
715 */
716 ep->ep_state |= SET_DEQ_PENDING;
717}
718
719static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci,
720 struct xhci_virt_ep *ep)
721{
722 ep->ep_state &= ~EP_HALT_PENDING;
723 /* Can't del_timer_sync in interrupt, so we attempt to cancel. If the
724 * timer is running on another CPU, we don't decrement stop_cmds_pending
725 * (since we didn't successfully stop the watchdog timer).
726 */
727 if (del_timer(&ep->stop_cmd_timer))
728 ep->stop_cmds_pending--;
729}
730
731/* Must be called with xhci->lock held in interrupt context */
732static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
733 struct xhci_td *cur_td, int status)
734{
735 struct usb_hcd *hcd;
736 struct urb *urb;
737 struct urb_priv *urb_priv;
738
739 urb = cur_td->urb;
740 urb_priv = urb->hcpriv;
741 urb_priv->td_cnt++;
742 hcd = bus_to_hcd(urb->dev->bus);
743
744 /* Only giveback urb when this is the last td in urb */
745 if (urb_priv->td_cnt == urb_priv->length) {
746 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
747 xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
748 if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
749 if (xhci->quirks & XHCI_AMD_PLL_FIX)
750 usb_amd_quirk_pll_enable();
751 }
752 }
753 usb_hcd_unlink_urb_from_ep(hcd, urb);
754
755 spin_unlock(&xhci->lock);
756 usb_hcd_giveback_urb(hcd, urb, status);
757 xhci_urb_free_priv(xhci, urb_priv);
758 spin_lock(&xhci->lock);
759 }
760}
761
762/*
763 * When we get a command completion for a Stop Endpoint Command, we need to
764 * unlink any cancelled TDs from the ring. There are two ways to do that:
765 *
766 * 1. If the HW was in the middle of processing the TD that needs to be
767 * cancelled, then we must move the ring's dequeue pointer past the last TRB
768 * in the TD with a Set Dequeue Pointer Command.
769 * 2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
770 * bit cleared) so that the HW will skip over them.
771 */
772static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
773 union xhci_trb *trb, struct xhci_event_cmd *event)
774{
775 unsigned int ep_index;
776 struct xhci_virt_device *virt_dev;
777 struct xhci_ring *ep_ring;
778 struct xhci_virt_ep *ep;
779 struct list_head *entry;
780 struct xhci_td *cur_td = NULL;
781 struct xhci_td *last_unlinked_td;
782
783 struct xhci_dequeue_state deq_state;
784
785 if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) {
786 virt_dev = xhci->devs[slot_id];
787 if (virt_dev)
788 handle_cmd_in_cmd_wait_list(xhci, virt_dev,
789 event);
790 else
791 xhci_warn(xhci, "Stop endpoint command "
792 "completion for disabled slot %u\n",
793 slot_id);
794 return;
795 }
796
797 memset(&deq_state, 0, sizeof(deq_state));
798 ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
799 ep = &xhci->devs[slot_id]->eps[ep_index];
800
801 if (list_empty(&ep->cancelled_td_list)) {
802 xhci_stop_watchdog_timer_in_irq(xhci, ep);
803 ep->stopped_td = NULL;
804 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
805 return;
806 }
807
808 /* Fix up the ep ring first, so HW stops executing cancelled TDs.
809 * We have the xHCI lock, so nothing can modify this list until we drop
810 * it. We're also in the event handler, so we can't get re-interrupted
811 * if another Stop Endpoint command completes
812 */
813 list_for_each(entry, &ep->cancelled_td_list) {
814 cur_td = list_entry(entry, struct xhci_td, cancelled_td_list);
815 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
816 "Removing canceled TD starting at 0x%llx (dma).",
817 (unsigned long long)xhci_trb_virt_to_dma(
818 cur_td->start_seg, cur_td->first_trb));
819 ep_ring = xhci_urb_to_transfer_ring(xhci, cur_td->urb);
820 if (!ep_ring) {
821 /* This shouldn't happen unless a driver is mucking
822 * with the stream ID after submission. This will
823 * leave the TD on the hardware ring, and the hardware
824 * will try to execute it, and may access a buffer
825 * that has already been freed. In the best case, the
826 * hardware will execute it, and the event handler will
827 * ignore the completion event for that TD, since it was
828 * removed from the td_list for that endpoint. In
829 * short, don't muck with the stream ID after
830 * submission.
831 */
832 xhci_warn(xhci, "WARN Cancelled URB %p "
833 "has invalid stream ID %u.\n",
834 cur_td->urb,
835 cur_td->urb->stream_id);
836 goto remove_finished_td;
837 }
838 /*
839 * If we stopped on the TD we need to cancel, then we have to
840 * move the xHC endpoint ring dequeue pointer past this TD.
841 */
842 if (cur_td == ep->stopped_td)
843 xhci_find_new_dequeue_state(xhci, slot_id, ep_index,
844 cur_td->urb->stream_id,
845 cur_td, &deq_state);
846 else
847 td_to_noop(xhci, ep_ring, cur_td, false);
848remove_finished_td:
849 /*
850 * The event handler won't see a completion for this TD anymore,
851 * so remove it from the endpoint ring's TD list. Keep it in
852 * the cancelled TD list for URB completion later.
853 */
854 list_del_init(&cur_td->td_list);
855 }
856 last_unlinked_td = cur_td;
857 xhci_stop_watchdog_timer_in_irq(xhci, ep);
858
859 /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
860 if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
861 xhci_queue_new_dequeue_state(xhci,
862 slot_id, ep_index,
863 ep->stopped_td->urb->stream_id,
864 &deq_state);
865 xhci_ring_cmd_db(xhci);
866 } else {
867 /* Otherwise ring the doorbell(s) to restart queued transfers */
868 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
869 }
870
871 /* Clear stopped_td if endpoint is not halted */
872 if (!(ep->ep_state & EP_HALTED))
873 ep->stopped_td = NULL;
874
875 /*
876 * Drop the lock and complete the URBs in the cancelled TD list.
877 * New TDs to be cancelled might be added to the end of the list before
878 * we can complete all the URBs for the TDs we already unlinked.
879 * So stop when we've completed the URB for the last TD we unlinked.
880 */
881 do {
882 cur_td = list_entry(ep->cancelled_td_list.next,
883 struct xhci_td, cancelled_td_list);
884 list_del_init(&cur_td->cancelled_td_list);
885
886 /* Clean up the cancelled URB */
887 /* Doesn't matter what we pass for status, since the core will
888 * just overwrite it (because the URB has been unlinked).
889 */
890 xhci_giveback_urb_in_irq(xhci, cur_td, 0);
891
892 /* Stop processing the cancelled list if the watchdog timer is
893 * running.
894 */
895 if (xhci->xhc_state & XHCI_STATE_DYING)
896 return;
897 } while (cur_td != last_unlinked_td);
898
899 /* Return to the event handler with xhci->lock re-acquired */
900}
901
902static void xhci_kill_ring_urbs(struct xhci_hcd *xhci, struct xhci_ring *ring)
903{
904 struct xhci_td *cur_td;
905
906 while (!list_empty(&ring->td_list)) {
907 cur_td = list_first_entry(&ring->td_list,
908 struct xhci_td, td_list);
909 list_del_init(&cur_td->td_list);
910 if (!list_empty(&cur_td->cancelled_td_list))
911 list_del_init(&cur_td->cancelled_td_list);
912 xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
913 }
914}
915
916static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci,
917 int slot_id, int ep_index)
918{
919 struct xhci_td *cur_td;
920 struct xhci_virt_ep *ep;
921 struct xhci_ring *ring;
922
923 ep = &xhci->devs[slot_id]->eps[ep_index];
924 if ((ep->ep_state & EP_HAS_STREAMS) ||
925 (ep->ep_state & EP_GETTING_NO_STREAMS)) {
926 int stream_id;
927
928 for (stream_id = 0; stream_id < ep->stream_info->num_streams;
929 stream_id++) {
930 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
931 "Killing URBs for slot ID %u, ep index %u, stream %u",
932 slot_id, ep_index, stream_id + 1);
933 xhci_kill_ring_urbs(xhci,
934 ep->stream_info->stream_rings[stream_id]);
935 }
936 } else {
937 ring = ep->ring;
938 if (!ring)
939 return;
940 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
941 "Killing URBs for slot ID %u, ep index %u",
942 slot_id, ep_index);
943 xhci_kill_ring_urbs(xhci, ring);
944 }
945 while (!list_empty(&ep->cancelled_td_list)) {
946 cur_td = list_first_entry(&ep->cancelled_td_list,
947 struct xhci_td, cancelled_td_list);
948 list_del_init(&cur_td->cancelled_td_list);
949 xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
950 }
951}
952
953/* Watchdog timer function for when a stop endpoint command fails to complete.
954 * In this case, we assume the host controller is broken or dying or dead. The
955 * host may still be completing some other events, so we have to be careful to
956 * let the event ring handler and the URB dequeueing/enqueueing functions know
957 * through xhci->state.
958 *
959 * The timer may also fire if the host takes a very long time to respond to the
960 * command, and the stop endpoint command completion handler cannot delete the
961 * timer before the timer function is called. Another endpoint cancellation may
962 * sneak in before the timer function can grab the lock, and that may queue
963 * another stop endpoint command and add the timer back. So we cannot use a
964 * simple flag to say whether there is a pending stop endpoint command for a
965 * particular endpoint.
966 *
967 * Instead we use a combination of that flag and a counter for the number of
968 * pending stop endpoint commands. If the timer is the tail end of the last
969 * stop endpoint command, and the endpoint's command is still pending, we assume
970 * the host is dying.
971 */
972void xhci_stop_endpoint_command_watchdog(unsigned long arg)
973{
974 struct xhci_hcd *xhci;
975 struct xhci_virt_ep *ep;
976 int ret, i, j;
977 unsigned long flags;
978
979 ep = (struct xhci_virt_ep *) arg;
980 xhci = ep->xhci;
981
982 spin_lock_irqsave(&xhci->lock, flags);
983
984 ep->stop_cmds_pending--;
985 if (xhci->xhc_state & XHCI_STATE_DYING) {
986 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
987 "Stop EP timer ran, but another timer marked "
988 "xHCI as DYING, exiting.");
989 spin_unlock_irqrestore(&xhci->lock, flags);
990 return;
991 }
992 if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) {
993 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
994 "Stop EP timer ran, but no command pending, "
995 "exiting.");
996 spin_unlock_irqrestore(&xhci->lock, flags);
997 return;
998 }
999
1000 xhci_warn(xhci, "xHCI host not responding to stop endpoint command.\n");
1001 xhci_warn(xhci, "Assuming host is dying, halting host.\n");
1002 /* Oops, HC is dead or dying or at least not responding to the stop
1003 * endpoint command.
1004 */
1005 xhci->xhc_state |= XHCI_STATE_DYING;
1006 /* Disable interrupts from the host controller and start halting it */
1007 xhci_quiesce(xhci);
1008 spin_unlock_irqrestore(&xhci->lock, flags);
1009
1010 ret = xhci_halt(xhci);
1011
1012 spin_lock_irqsave(&xhci->lock, flags);
1013 if (ret < 0) {
1014 /* This is bad; the host is not responding to commands and it's
1015 * not allowing itself to be halted. At least interrupts are
1016 * disabled. If we call usb_hc_died(), it will attempt to
1017 * disconnect all device drivers under this host. Those
1018 * disconnect() methods will wait for all URBs to be unlinked,
1019 * so we must complete them.
1020 */
1021 xhci_warn(xhci, "Non-responsive xHCI host is not halting.\n");
1022 xhci_warn(xhci, "Completing active URBs anyway.\n");
1023 /* We could turn all TDs on the rings to no-ops. This won't
1024 * help if the host has cached part of the ring, and is slow if
1025 * we want to preserve the cycle bit. Skip it and hope the host
1026 * doesn't touch the memory.
1027 */
1028 }
1029 for (i = 0; i < MAX_HC_SLOTS; i++) {
1030 if (!xhci->devs[i])
1031 continue;
1032 for (j = 0; j < 31; j++)
1033 xhci_kill_endpoint_urbs(xhci, i, j);
1034 }
1035 spin_unlock_irqrestore(&xhci->lock, flags);
1036 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1037 "Calling usb_hc_died()");
1038 usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
1039 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1040 "xHCI host controller is dead.");
1041}
1042
1043
1044static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci,
1045 struct xhci_virt_device *dev,
1046 struct xhci_ring *ep_ring,
1047 unsigned int ep_index)
1048{
1049 union xhci_trb *dequeue_temp;
1050 int num_trbs_free_temp;
1051 bool revert = false;
1052
1053 num_trbs_free_temp = ep_ring->num_trbs_free;
1054 dequeue_temp = ep_ring->dequeue;
1055
1056 /* If we get two back-to-back stalls, and the first stalled transfer
1057 * ends just before a link TRB, the dequeue pointer will be left on
1058 * the link TRB by the code in the while loop. So we have to update
1059 * the dequeue pointer one segment further, or we'll jump off
1060 * the segment into la-la-land.
1061 */
1062 if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) {
1063 ep_ring->deq_seg = ep_ring->deq_seg->next;
1064 ep_ring->dequeue = ep_ring->deq_seg->trbs;
1065 }
1066
1067 while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
1068 /* We have more usable TRBs */
1069 ep_ring->num_trbs_free++;
1070 ep_ring->dequeue++;
1071 if (last_trb(xhci, ep_ring, ep_ring->deq_seg,
1072 ep_ring->dequeue)) {
1073 if (ep_ring->dequeue ==
1074 dev->eps[ep_index].queued_deq_ptr)
1075 break;
1076 ep_ring->deq_seg = ep_ring->deq_seg->next;
1077 ep_ring->dequeue = ep_ring->deq_seg->trbs;
1078 }
1079 if (ep_ring->dequeue == dequeue_temp) {
1080 revert = true;
1081 break;
1082 }
1083 }
1084
1085 if (revert) {
1086 xhci_dbg(xhci, "Unable to find new dequeue pointer\n");
1087 ep_ring->num_trbs_free = num_trbs_free_temp;
1088 }
1089}
1090
1091/*
1092 * When we get a completion for a Set Transfer Ring Dequeue Pointer command,
1093 * we need to clear the set deq pending flag in the endpoint ring state, so that
1094 * the TD queueing code can ring the doorbell again. We also need to ring the
1095 * endpoint doorbell to restart the ring, but only if there aren't more
1096 * cancellations pending.
1097 */
1098static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
1099 union xhci_trb *trb, u32 cmd_comp_code)
1100{
1101 unsigned int ep_index;
1102 unsigned int stream_id;
1103 struct xhci_ring *ep_ring;
1104 struct xhci_virt_device *dev;
1105 struct xhci_virt_ep *ep;
1106 struct xhci_ep_ctx *ep_ctx;
1107 struct xhci_slot_ctx *slot_ctx;
1108
1109 ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
1110 stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
1111 dev = xhci->devs[slot_id];
1112 ep = &dev->eps[ep_index];
1113
1114 ep_ring = xhci_stream_id_to_ring(dev, ep_index, stream_id);
1115 if (!ep_ring) {
1116 xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n",
1117 stream_id);
1118 /* XXX: Harmless??? */
1119 dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
1120 return;
1121 }
1122
1123 ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
1124 slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
1125
1126 if (cmd_comp_code != COMP_SUCCESS) {
1127 unsigned int ep_state;
1128 unsigned int slot_state;
1129
1130 switch (cmd_comp_code) {
1131 case COMP_TRB_ERR:
1132 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because of stream ID configuration\n");
1133 break;
1134 case COMP_CTX_STATE:
1135 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.\n");
1136 ep_state = le32_to_cpu(ep_ctx->ep_info);
1137 ep_state &= EP_STATE_MASK;
1138 slot_state = le32_to_cpu(slot_ctx->dev_state);
1139 slot_state = GET_SLOT_STATE(slot_state);
1140 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1141 "Slot state = %u, EP state = %u",
1142 slot_state, ep_state);
1143 break;
1144 case COMP_EBADSLT:
1145 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because slot %u was not enabled.\n",
1146 slot_id);
1147 break;
1148 default:
1149 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown completion code of %u.\n",
1150 cmd_comp_code);
1151 break;
1152 }
1153 /* OK what do we do now? The endpoint state is hosed, and we
1154 * should never get to this point if the synchronization between
1155 * queueing, and endpoint state are correct. This might happen
1156 * if the device gets disconnected after we've finished
1157 * cancelling URBs, which might not be an error...
1158 */
1159 } else {
1160 u64 deq;
1161 /* 4.6.10 deq ptr is written to the stream ctx for streams */
1162 if (ep->ep_state & EP_HAS_STREAMS) {
1163 struct xhci_stream_ctx *ctx =
1164 &ep->stream_info->stream_ctx_array[stream_id];
1165 deq = le64_to_cpu(ctx->stream_ring) & SCTX_DEQ_MASK;
1166 } else {
1167 deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK;
1168 }
1169 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1170 "Successful Set TR Deq Ptr cmd, deq = @%08llx", deq);
1171 if (xhci_trb_virt_to_dma(ep->queued_deq_seg,
1172 ep->queued_deq_ptr) == deq) {
1173 /* Update the ring's dequeue segment and dequeue pointer
1174 * to reflect the new position.
1175 */
1176 update_ring_for_set_deq_completion(xhci, dev,
1177 ep_ring, ep_index);
1178 } else {
1179 xhci_warn(xhci, "Mismatch between completed Set TR Deq Ptr command & xHCI internal state.\n");
1180 xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n",
1181 ep->queued_deq_seg, ep->queued_deq_ptr);
1182 }
1183 }
1184
1185 dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
1186 dev->eps[ep_index].queued_deq_seg = NULL;
1187 dev->eps[ep_index].queued_deq_ptr = NULL;
1188 /* Restart any rings with pending URBs */
1189 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1190}
1191
1192static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
1193 union xhci_trb *trb, u32 cmd_comp_code)
1194{
1195 unsigned int ep_index;
1196
1197 ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
1198 /* This command will only fail if the endpoint wasn't halted,
1199 * but we don't care.
1200 */
1201 xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
1202 "Ignoring reset ep completion code of %u", cmd_comp_code);
1203
1204 /* HW with the reset endpoint quirk needs to have a configure endpoint
1205 * command complete before the endpoint can be used. Queue that here
1206 * because the HW can't handle two commands being queued in a row.
1207 */
1208 if (xhci->quirks & XHCI_RESET_EP_QUIRK) {
1209 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
1210 "Queueing configure endpoint command");
1211 xhci_queue_configure_endpoint(xhci,
1212 xhci->devs[slot_id]->in_ctx->dma, slot_id,
1213 false);
1214 xhci_ring_cmd_db(xhci);
1215 } else {
1216 /* Clear our internal halted state and restart the ring(s) */
1217 xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
1218 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1219 }
1220}
1221
1222/* Complete the command and detele it from the devcie's command queue.
1223 */
1224static void xhci_complete_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
1225 struct xhci_command *command, u32 status)
1226{
1227 command->status = status;
1228 list_del(&command->cmd_list);
1229 if (command->completion)
1230 complete(command->completion);
1231 else
1232 xhci_free_command(xhci, command);
1233}
1234
1235
1236/* Check to see if a command in the device's command queue matches this one.
1237 * Signal the completion or free the command, and return 1. Return 0 if the
1238 * completed command isn't at the head of the command list.
1239 */
1240static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
1241 struct xhci_virt_device *virt_dev,
1242 struct xhci_event_cmd *event)
1243{
1244 struct xhci_command *command;
1245
1246 if (list_empty(&virt_dev->cmd_list))
1247 return 0;
1248
1249 command = list_entry(virt_dev->cmd_list.next,
1250 struct xhci_command, cmd_list);
1251 if (xhci->cmd_ring->dequeue != command->command_trb)
1252 return 0;
1253
1254 xhci_complete_cmd_in_cmd_wait_list(xhci, command,
1255 GET_COMP_CODE(le32_to_cpu(event->status)));
1256 return 1;
1257}
1258
1259/*
1260 * Finding the command trb need to be cancelled and modifying it to
1261 * NO OP command. And if the command is in device's command wait
1262 * list, finishing and freeing it.
1263 *
1264 * If we can't find the command trb, we think it had already been
1265 * executed.
1266 */
1267static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd)
1268{
1269 struct xhci_segment *cur_seg;
1270 union xhci_trb *cmd_trb;
1271 u32 cycle_state;
1272
1273 if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue)
1274 return;
1275
1276 /* find the current segment of command ring */
1277 cur_seg = find_trb_seg(xhci->cmd_ring->first_seg,
1278 xhci->cmd_ring->dequeue, &cycle_state);
1279
1280 if (!cur_seg) {
1281 xhci_warn(xhci, "Command ring mismatch, dequeue = %p %llx (dma)\n",
1282 xhci->cmd_ring->dequeue,
1283 (unsigned long long)
1284 xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
1285 xhci->cmd_ring->dequeue));
1286 xhci_debug_ring(xhci, xhci->cmd_ring);
1287 xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
1288 return;
1289 }
1290
1291 /* find the command trb matched by cd from command ring */
1292 for (cmd_trb = xhci->cmd_ring->dequeue;
1293 cmd_trb != xhci->cmd_ring->enqueue;
1294 next_trb(xhci, xhci->cmd_ring, &cur_seg, &cmd_trb)) {
1295 /* If the trb is link trb, continue */
1296 if (TRB_TYPE_LINK_LE32(cmd_trb->generic.field[3]))
1297 continue;
1298
1299 if (cur_cd->cmd_trb == cmd_trb) {
1300
1301 /* If the command in device's command list, we should
1302 * finish it and free the command structure.
1303 */
1304 if (cur_cd->command)
1305 xhci_complete_cmd_in_cmd_wait_list(xhci,
1306 cur_cd->command, COMP_CMD_STOP);
1307
1308 /* get cycle state from the origin command trb */
1309 cycle_state = le32_to_cpu(cmd_trb->generic.field[3])
1310 & TRB_CYCLE;
1311
1312 /* modify the command trb to NO OP command */
1313 cmd_trb->generic.field[0] = 0;
1314 cmd_trb->generic.field[1] = 0;
1315 cmd_trb->generic.field[2] = 0;
1316 cmd_trb->generic.field[3] = cpu_to_le32(
1317 TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
1318 break;
1319 }
1320 }
1321}
1322
1323static void xhci_cancel_cmd_in_cd_list(struct xhci_hcd *xhci)
1324{
1325 struct xhci_cd *cur_cd, *next_cd;
1326
1327 if (list_empty(&xhci->cancel_cmd_list))
1328 return;
1329
1330 list_for_each_entry_safe(cur_cd, next_cd,
1331 &xhci->cancel_cmd_list, cancel_cmd_list) {
1332 xhci_cmd_to_noop(xhci, cur_cd);
1333 list_del(&cur_cd->cancel_cmd_list);
1334 kfree(cur_cd);
1335 }
1336}
1337
1338/*
1339 * traversing the cancel_cmd_list. If the command descriptor according
1340 * to cmd_trb is found, the function free it and return 1, otherwise
1341 * return 0.
1342 */
1343static int xhci_search_cmd_trb_in_cd_list(struct xhci_hcd *xhci,
1344 union xhci_trb *cmd_trb)
1345{
1346 struct xhci_cd *cur_cd, *next_cd;
1347
1348 if (list_empty(&xhci->cancel_cmd_list))
1349 return 0;
1350
1351 list_for_each_entry_safe(cur_cd, next_cd,
1352 &xhci->cancel_cmd_list, cancel_cmd_list) {
1353 if (cur_cd->cmd_trb == cmd_trb) {
1354 if (cur_cd->command)
1355 xhci_complete_cmd_in_cmd_wait_list(xhci,
1356 cur_cd->command, COMP_CMD_STOP);
1357 list_del(&cur_cd->cancel_cmd_list);
1358 kfree(cur_cd);
1359 return 1;
1360 }
1361 }
1362
1363 return 0;
1364}
1365
1366/*
1367 * If the cmd_trb_comp_code is COMP_CMD_ABORT, we just check whether the
1368 * trb pointed by the command ring dequeue pointer is the trb we want to
1369 * cancel or not. And if the cmd_trb_comp_code is COMP_CMD_STOP, we will
1370 * traverse the cancel_cmd_list to trun the all of the commands according
1371 * to command descriptor to NO-OP trb.
1372 */
1373static int handle_stopped_cmd_ring(struct xhci_hcd *xhci,
1374 int cmd_trb_comp_code)
1375{
1376 int cur_trb_is_good = 0;
1377
1378 /* Searching the cmd trb pointed by the command ring dequeue
1379 * pointer in command descriptor list. If it is found, free it.
1380 */
1381 cur_trb_is_good = xhci_search_cmd_trb_in_cd_list(xhci,
1382 xhci->cmd_ring->dequeue);
1383
1384 if (cmd_trb_comp_code == COMP_CMD_ABORT)
1385 xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
1386 else if (cmd_trb_comp_code == COMP_CMD_STOP) {
1387 /* traversing the cancel_cmd_list and canceling
1388 * the command according to command descriptor
1389 */
1390 xhci_cancel_cmd_in_cd_list(xhci);
1391
1392 xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
1393 /*
1394 * ring command ring doorbell again to restart the
1395 * command ring
1396 */
1397 if (xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue)
1398 xhci_ring_cmd_db(xhci);
1399 }
1400 return cur_trb_is_good;
1401}
1402
1403static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id,
1404 u32 cmd_comp_code)
1405{
1406 if (cmd_comp_code == COMP_SUCCESS)
1407 xhci->slot_id = slot_id;
1408 else
1409 xhci->slot_id = 0;
1410 complete(&xhci->addr_dev);
1411}
1412
1413static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id)
1414{
1415 struct xhci_virt_device *virt_dev;
1416
1417 virt_dev = xhci->devs[slot_id];
1418 if (!virt_dev)
1419 return;
1420 if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
1421 /* Delete default control endpoint resources */
1422 xhci_free_device_endpoint_resources(xhci, virt_dev, true);
1423 xhci_free_virt_device(xhci, slot_id);
1424}
1425
1426static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
1427 struct xhci_event_cmd *event, u32 cmd_comp_code)
1428{
1429 struct xhci_virt_device *virt_dev;
1430 struct xhci_input_control_ctx *ctrl_ctx;
1431 unsigned int ep_index;
1432 unsigned int ep_state;
1433 u32 add_flags, drop_flags;
1434
1435 virt_dev = xhci->devs[slot_id];
1436 if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
1437 return;
1438 /*
1439 * Configure endpoint commands can come from the USB core
1440 * configuration or alt setting changes, or because the HW
1441 * needed an extra configure endpoint command after a reset
1442 * endpoint command or streams were being configured.
1443 * If the command was for a halted endpoint, the xHCI driver
1444 * is not waiting on the configure endpoint command.
1445 */
1446 ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
1447 if (!ctrl_ctx) {
1448 xhci_warn(xhci, "Could not get input context, bad type.\n");
1449 return;
1450 }
1451
1452 add_flags = le32_to_cpu(ctrl_ctx->add_flags);
1453 drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
1454 /* Input ctx add_flags are the endpoint index plus one */
1455 ep_index = xhci_last_valid_endpoint(add_flags) - 1;
1456
1457 /* A usb_set_interface() call directly after clearing a halted
1458 * condition may race on this quirky hardware. Not worth
1459 * worrying about, since this is prototype hardware. Not sure
1460 * if this will work for streams, but streams support was
1461 * untested on this prototype.
1462 */
1463 if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
1464 ep_index != (unsigned int) -1 &&
1465 add_flags - SLOT_FLAG == drop_flags) {
1466 ep_state = virt_dev->eps[ep_index].ep_state;
1467 if (!(ep_state & EP_HALTED))
1468 goto bandwidth_change;
1469 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
1470 "Completed config ep cmd - "
1471 "last ep index = %d, state = %d",
1472 ep_index, ep_state);
1473 /* Clear internal halted state and restart ring(s) */
1474 virt_dev->eps[ep_index].ep_state &= ~EP_HALTED;
1475 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1476 return;
1477 }
1478bandwidth_change:
1479 xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
1480 "Completed config ep cmd");
1481 virt_dev->cmd_status = cmd_comp_code;
1482 complete(&virt_dev->cmd_completion);
1483 return;
1484}
1485
1486static void xhci_handle_cmd_eval_ctx(struct xhci_hcd *xhci, int slot_id,
1487 struct xhci_event_cmd *event, u32 cmd_comp_code)
1488{
1489 struct xhci_virt_device *virt_dev;
1490
1491 virt_dev = xhci->devs[slot_id];
1492 if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
1493 return;
1494 virt_dev->cmd_status = cmd_comp_code;
1495 complete(&virt_dev->cmd_completion);
1496}
1497
1498static void xhci_handle_cmd_addr_dev(struct xhci_hcd *xhci, int slot_id,
1499 u32 cmd_comp_code)
1500{
1501 xhci->devs[slot_id]->cmd_status = cmd_comp_code;
1502 complete(&xhci->addr_dev);
1503}
1504
1505static void xhci_handle_cmd_reset_dev(struct xhci_hcd *xhci, int slot_id,
1506 struct xhci_event_cmd *event)
1507{
1508 struct xhci_virt_device *virt_dev;
1509
1510 xhci_dbg(xhci, "Completed reset device command.\n");
1511 virt_dev = xhci->devs[slot_id];
1512 if (virt_dev)
1513 handle_cmd_in_cmd_wait_list(xhci, virt_dev, event);
1514 else
1515 xhci_warn(xhci, "Reset device command completion "
1516 "for disabled slot %u\n", slot_id);
1517}
1518
1519static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci,
1520 struct xhci_event_cmd *event)
1521{
1522 if (!(xhci->quirks & XHCI_NEC_HOST)) {
1523 xhci->error_bitmask |= 1 << 6;
1524 return;
1525 }
1526 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
1527 "NEC firmware version %2x.%02x",
1528 NEC_FW_MAJOR(le32_to_cpu(event->status)),
1529 NEC_FW_MINOR(le32_to_cpu(event->status)));
1530}
1531
1532static void handle_cmd_completion(struct xhci_hcd *xhci,
1533 struct xhci_event_cmd *event)
1534{
1535 int slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
1536 u64 cmd_dma;
1537 dma_addr_t cmd_dequeue_dma;
1538 u32 cmd_comp_code;
1539 union xhci_trb *cmd_trb;
1540 u32 cmd_type;
1541
1542 cmd_dma = le64_to_cpu(event->cmd_trb);
1543 cmd_trb = xhci->cmd_ring->dequeue;
1544 cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
1545 cmd_trb);
1546 /* Is the command ring deq ptr out of sync with the deq seg ptr? */
1547 if (cmd_dequeue_dma == 0) {
1548 xhci->error_bitmask |= 1 << 4;
1549 return;
1550 }
1551 /* Does the DMA address match our internal dequeue pointer address? */
1552 if (cmd_dma != (u64) cmd_dequeue_dma) {
1553 xhci->error_bitmask |= 1 << 5;
1554 return;
1555 }
1556
1557 trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event);
1558
1559 cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status));
1560 if (cmd_comp_code == COMP_CMD_ABORT || cmd_comp_code == COMP_CMD_STOP) {
1561 /* If the return value is 0, we think the trb pointed by
1562 * command ring dequeue pointer is a good trb. The good
1563 * trb means we don't want to cancel the trb, but it have
1564 * been stopped by host. So we should handle it normally.
1565 * Otherwise, driver should invoke inc_deq() and return.
1566 */
1567 if (handle_stopped_cmd_ring(xhci, cmd_comp_code)) {
1568 inc_deq(xhci, xhci->cmd_ring);
1569 return;
1570 }
1571 /* There is no command to handle if we get a stop event when the
1572 * command ring is empty, event->cmd_trb points to the next
1573 * unset command
1574 */
1575 if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue)
1576 return;
1577 }
1578
1579 cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
1580 switch (cmd_type) {
1581 case TRB_ENABLE_SLOT:
1582 xhci_handle_cmd_enable_slot(xhci, slot_id, cmd_comp_code);
1583 break;
1584 case TRB_DISABLE_SLOT:
1585 xhci_handle_cmd_disable_slot(xhci, slot_id);
1586 break;
1587 case TRB_CONFIG_EP:
1588 xhci_handle_cmd_config_ep(xhci, slot_id, event, cmd_comp_code);
1589 break;
1590 case TRB_EVAL_CONTEXT:
1591 xhci_handle_cmd_eval_ctx(xhci, slot_id, event, cmd_comp_code);
1592 break;
1593 case TRB_ADDR_DEV:
1594 xhci_handle_cmd_addr_dev(xhci, slot_id, cmd_comp_code);
1595 break;
1596 case TRB_STOP_RING:
1597 WARN_ON(slot_id != TRB_TO_SLOT_ID(
1598 le32_to_cpu(cmd_trb->generic.field[3])));
1599 xhci_handle_cmd_stop_ep(xhci, slot_id, cmd_trb, event);
1600 break;
1601 case TRB_SET_DEQ:
1602 WARN_ON(slot_id != TRB_TO_SLOT_ID(
1603 le32_to_cpu(cmd_trb->generic.field[3])));
1604 xhci_handle_cmd_set_deq(xhci, slot_id, cmd_trb, cmd_comp_code);
1605 break;
1606 case TRB_CMD_NOOP:
1607 break;
1608 case TRB_RESET_EP:
1609 WARN_ON(slot_id != TRB_TO_SLOT_ID(
1610 le32_to_cpu(cmd_trb->generic.field[3])));
1611 xhci_handle_cmd_reset_ep(xhci, slot_id, cmd_trb, cmd_comp_code);
1612 break;
1613 case TRB_RESET_DEV:
1614 WARN_ON(slot_id != TRB_TO_SLOT_ID(
1615 le32_to_cpu(cmd_trb->generic.field[3])));
1616 xhci_handle_cmd_reset_dev(xhci, slot_id, event);
1617 break;
1618 case TRB_NEC_GET_FW:
1619 xhci_handle_cmd_nec_get_fw(xhci, event);
1620 break;
1621 default:
1622 /* Skip over unknown commands on the event ring */
1623 xhci->error_bitmask |= 1 << 6;
1624 break;
1625 }
1626 inc_deq(xhci, xhci->cmd_ring);
1627}
1628
1629static void handle_vendor_event(struct xhci_hcd *xhci,
1630 union xhci_trb *event)
1631{
1632 u32 trb_type;
1633
1634 trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->generic.field[3]));
1635 xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);
1636 if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST))
1637 handle_cmd_completion(xhci, &event->event_cmd);
1638}
1639
1640/* @port_id: the one-based port ID from the hardware (indexed from array of all
1641 * port registers -- USB 3.0 and USB 2.0).
1642 *
1643 * Returns a zero-based port number, which is suitable for indexing into each of
1644 * the split roothubs' port arrays and bus state arrays.
1645 * Add one to it in order to call xhci_find_slot_id_by_port.
1646 */
1647static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
1648 struct xhci_hcd *xhci, u32 port_id)
1649{
1650 unsigned int i;
1651 unsigned int num_similar_speed_ports = 0;
1652
1653 /* port_id from the hardware is 1-based, but port_array[], usb3_ports[],
1654 * and usb2_ports are 0-based indexes. Count the number of similar
1655 * speed ports, up to 1 port before this port.
1656 */
1657 for (i = 0; i < (port_id - 1); i++) {
1658 u8 port_speed = xhci->port_array[i];
1659
1660 /*
1661 * Skip ports that don't have known speeds, or have duplicate
1662 * Extended Capabilities port speed entries.
1663 */
1664 if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
1665 continue;
1666
1667 /*
1668 * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and
1669 * 1.1 ports are under the USB 2.0 hub. If the port speed
1670 * matches the device speed, it's a similar speed port.
1671 */
1672 if ((port_speed == 0x03) == (hcd->speed == HCD_USB3))
1673 num_similar_speed_ports++;
1674 }
1675 return num_similar_speed_ports;
1676}
1677
1678static void handle_device_notification(struct xhci_hcd *xhci,
1679 union xhci_trb *event)
1680{
1681 u32 slot_id;
1682 struct usb_device *udev;
1683
1684 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->generic.field[3]));
1685 if (!xhci->devs[slot_id]) {
1686 xhci_warn(xhci, "Device Notification event for "
1687 "unused slot %u\n", slot_id);
1688 return;
1689 }
1690
1691 xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",
1692 slot_id);
1693 udev = xhci->devs[slot_id]->udev;
1694 if (udev && udev->parent)
1695 usb_wakeup_notification(udev->parent, udev->portnum);
1696}
1697
1698static void handle_port_status(struct xhci_hcd *xhci,
1699 union xhci_trb *event)
1700{
1701 struct usb_hcd *hcd;
1702 u32 port_id;
1703 u32 temp, temp1;
1704 int max_ports;
1705 int slot_id;
1706 unsigned int faked_port_index;
1707 u8 major_revision;
1708 struct xhci_bus_state *bus_state;
1709 __le32 __iomem **port_array;
1710 bool bogus_port_status = false;
1711
1712 /* Port status change events always have a successful completion code */
1713 if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS) {
1714 xhci_warn(xhci, "WARN: xHC returned failed port status event\n");
1715 xhci->error_bitmask |= 1 << 8;
1716 }
1717 port_id = GET_PORT_ID(le32_to_cpu(event->generic.field[0]));
1718 xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id);
1719
1720 max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
1721 if ((port_id <= 0) || (port_id > max_ports)) {
1722 xhci_warn(xhci, "Invalid port id %d\n", port_id);
1723 inc_deq(xhci, xhci->event_ring);
1724 return;
1725 }
1726
1727 /* Figure out which usb_hcd this port is attached to:
1728 * is it a USB 3.0 port or a USB 2.0/1.1 port?
1729 */
1730 major_revision = xhci->port_array[port_id - 1];
1731
1732 /* Find the right roothub. */
1733 hcd = xhci_to_hcd(xhci);
1734 if ((major_revision == 0x03) != (hcd->speed == HCD_USB3))
1735 hcd = xhci->shared_hcd;
1736
1737 if (major_revision == 0) {
1738 xhci_warn(xhci, "Event for port %u not in "
1739 "Extended Capabilities, ignoring.\n",
1740 port_id);
1741 bogus_port_status = true;
1742 goto cleanup;
1743 }
1744 if (major_revision == DUPLICATE_ENTRY) {
1745 xhci_warn(xhci, "Event for port %u duplicated in"
1746 "Extended Capabilities, ignoring.\n",
1747 port_id);
1748 bogus_port_status = true;
1749 goto cleanup;
1750 }
1751
1752 /*
1753 * Hardware port IDs reported by a Port Status Change Event include USB
1754 * 3.0 and USB 2.0 ports. We want to check if the port has reported a
1755 * resume event, but we first need to translate the hardware port ID
1756 * into the index into the ports on the correct split roothub, and the
1757 * correct bus_state structure.
1758 */
1759 bus_state = &xhci->bus_state[hcd_index(hcd)];
1760 if (hcd->speed == HCD_USB3)
1761 port_array = xhci->usb3_ports;
1762 else
1763 port_array = xhci->usb2_ports;
1764 /* Find the faked port hub number */
1765 faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci,
1766 port_id);
1767
1768 temp = readl(port_array[faked_port_index]);
1769 if (hcd->state == HC_STATE_SUSPENDED) {
1770 xhci_dbg(xhci, "resume root hub\n");
1771 usb_hcd_resume_root_hub(hcd);
1772 }
1773
1774 if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
1775 xhci_dbg(xhci, "port resume event for port %d\n", port_id);
1776
1777 temp1 = readl(&xhci->op_regs->command);
1778 if (!(temp1 & CMD_RUN)) {
1779 xhci_warn(xhci, "xHC is not running.\n");
1780 goto cleanup;
1781 }
1782
1783 if (DEV_SUPERSPEED(temp)) {
1784 xhci_dbg(xhci, "remote wake SS port %d\n", port_id);
1785 /* Set a flag to say the port signaled remote wakeup,
1786 * so we can tell the difference between the end of
1787 * device and host initiated resume.
1788 */
1789 bus_state->port_remote_wakeup |= 1 << faked_port_index;
1790 xhci_test_and_clear_bit(xhci, port_array,
1791 faked_port_index, PORT_PLC);
1792 xhci_set_link_state(xhci, port_array, faked_port_index,
1793 XDEV_U0);
1794 /* Need to wait until the next link state change
1795 * indicates the device is actually in U0.
1796 */
1797 bogus_port_status = true;
1798 goto cleanup;
1799 } else {
1800 xhci_dbg(xhci, "resume HS port %d\n", port_id);
1801 bus_state->resume_done[faked_port_index] = jiffies +
1802 msecs_to_jiffies(20);
1803 set_bit(faked_port_index, &bus_state->resuming_ports);
1804 mod_timer(&hcd->rh_timer,
1805 bus_state->resume_done[faked_port_index]);
1806 /* Do the rest in GetPortStatus */
1807 }
1808 }
1809
1810 if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 &&
1811 DEV_SUPERSPEED(temp)) {
1812 xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
1813 /* We've just brought the device into U0 through either the
1814 * Resume state after a device remote wakeup, or through the
1815 * U3Exit state after a host-initiated resume. If it's a device
1816 * initiated remote wake, don't pass up the link state change,
1817 * so the roothub behavior is consistent with external
1818 * USB 3.0 hub behavior.
1819 */
1820 slot_id = xhci_find_slot_id_by_port(hcd, xhci,
1821 faked_port_index + 1);
1822 if (slot_id && xhci->devs[slot_id])
1823 xhci_ring_device(xhci, slot_id);
1824 if (bus_state->port_remote_wakeup & (1 << faked_port_index)) {
1825 bus_state->port_remote_wakeup &=
1826 ~(1 << faked_port_index);
1827 xhci_test_and_clear_bit(xhci, port_array,
1828 faked_port_index, PORT_PLC);
1829 usb_wakeup_notification(hcd->self.root_hub,
1830 faked_port_index + 1);
1831 bogus_port_status = true;
1832 goto cleanup;
1833 }
1834 }
1835
1836 /*
1837 * Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
1838 * RExit to a disconnect state). If so, let the the driver know it's
1839 * out of the RExit state.
1840 */
1841 if (!DEV_SUPERSPEED(temp) &&
1842 test_and_clear_bit(faked_port_index,
1843 &bus_state->rexit_ports)) {
1844 complete(&bus_state->rexit_done[faked_port_index]);
1845 bogus_port_status = true;
1846 goto cleanup;
1847 }
1848
1849 if (hcd->speed != HCD_USB3)
1850 xhci_test_and_clear_bit(xhci, port_array, faked_port_index,
1851 PORT_PLC);
1852
1853cleanup:
1854 /* Update event ring dequeue pointer before dropping the lock */
1855 inc_deq(xhci, xhci->event_ring);
1856
1857 /* Don't make the USB core poll the roothub if we got a bad port status
1858 * change event. Besides, at that point we can't tell which roothub
1859 * (USB 2.0 or USB 3.0) to kick.
1860 */
1861 if (bogus_port_status)
1862 return;
1863
1864 /*
1865 * xHCI port-status-change events occur when the "or" of all the
1866 * status-change bits in the portsc register changes from 0 to 1.
1867 * New status changes won't cause an event if any other change
1868 * bits are still set. When an event occurs, switch over to
1869 * polling to avoid losing status changes.
1870 */
1871 xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
1872 set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
1873 spin_unlock(&xhci->lock);
1874 /* Pass this up to the core */
1875 usb_hcd_poll_rh_status(hcd);
1876 spin_lock(&xhci->lock);
1877}
1878
1879/*
1880 * This TD is defined by the TRBs starting at start_trb in start_seg and ending
1881 * at end_trb, which may be in another segment. If the suspect DMA address is a
1882 * TRB in this TD, this function returns that TRB's segment. Otherwise it
1883 * returns 0.
1884 */
1885struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
1886 union xhci_trb *start_trb,
1887 union xhci_trb *end_trb,
1888 dma_addr_t suspect_dma)
1889{
1890 dma_addr_t start_dma;
1891 dma_addr_t end_seg_dma;
1892 dma_addr_t end_trb_dma;
1893 struct xhci_segment *cur_seg;
1894
1895 start_dma = xhci_trb_virt_to_dma(start_seg, start_trb);
1896 cur_seg = start_seg;
1897
1898 do {
1899 if (start_dma == 0)
1900 return NULL;
1901 /* We may get an event for a Link TRB in the middle of a TD */
1902 end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
1903 &cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
1904 /* If the end TRB isn't in this segment, this is set to 0 */
1905 end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
1906
1907 if (end_trb_dma > 0) {
1908 /* The end TRB is in this segment, so suspect should be here */
1909 if (start_dma <= end_trb_dma) {
1910 if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
1911 return cur_seg;
1912 } else {
1913 /* Case for one segment with
1914 * a TD wrapped around to the top
1915 */
1916 if ((suspect_dma >= start_dma &&
1917 suspect_dma <= end_seg_dma) ||
1918 (suspect_dma >= cur_seg->dma &&
1919 suspect_dma <= end_trb_dma))
1920 return cur_seg;
1921 }
1922 return NULL;
1923 } else {
1924 /* Might still be somewhere in this segment */
1925 if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
1926 return cur_seg;
1927 }
1928 cur_seg = cur_seg->next;
1929 start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
1930 } while (cur_seg != start_seg);
1931
1932 return NULL;
1933}
1934
1935static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
1936 unsigned int slot_id, unsigned int ep_index,
1937 unsigned int stream_id,
1938 struct xhci_td *td, union xhci_trb *event_trb)
1939{
1940 struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
1941 ep->ep_state |= EP_HALTED;
1942 ep->stopped_td = td;
1943 ep->stopped_stream = stream_id;
1944
1945 xhci_queue_reset_ep(xhci, slot_id, ep_index);
1946 xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
1947
1948 ep->stopped_td = NULL;
1949 ep->stopped_stream = 0;
1950
1951 xhci_ring_cmd_db(xhci);
1952}
1953
1954/* Check if an error has halted the endpoint ring. The class driver will
1955 * cleanup the halt for a non-default control endpoint if we indicate a stall.
1956 * However, a babble and other errors also halt the endpoint ring, and the class
1957 * driver won't clear the halt in that case, so we need to issue a Set Transfer
1958 * Ring Dequeue Pointer command manually.
1959 */
1960static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,
1961 struct xhci_ep_ctx *ep_ctx,
1962 unsigned int trb_comp_code)
1963{
1964 /* TRB completion codes that may require a manual halt cleanup */
1965 if (trb_comp_code == COMP_TX_ERR ||
1966 trb_comp_code == COMP_BABBLE ||
1967 trb_comp_code == COMP_SPLIT_ERR)
1968 /* The 0.96 spec says a babbling control endpoint
1969 * is not halted. The 0.96 spec says it is. Some HW
1970 * claims to be 0.95 compliant, but it halts the control
1971 * endpoint anyway. Check if a babble halted the
1972 * endpoint.
1973 */
1974 if ((ep_ctx->ep_info & cpu_to_le32(EP_STATE_MASK)) ==
1975 cpu_to_le32(EP_STATE_HALTED))
1976 return 1;
1977
1978 return 0;
1979}
1980
1981int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
1982{
1983 if (trb_comp_code >= 224 && trb_comp_code <= 255) {
1984 /* Vendor defined "informational" completion code,
1985 * treat as not-an-error.
1986 */
1987 xhci_dbg(xhci, "Vendor defined info completion code %u\n",
1988 trb_comp_code);
1989 xhci_dbg(xhci, "Treating code as success.\n");
1990 return 1;
1991 }
1992 return 0;
1993}
1994
1995/*
1996 * Finish the td processing, remove the td from td list;
1997 * Return 1 if the urb can be given back.
1998 */
1999static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
2000 union xhci_trb *event_trb, struct xhci_transfer_event *event,
2001 struct xhci_virt_ep *ep, int *status, bool skip)
2002{
2003 struct xhci_virt_device *xdev;
2004 struct xhci_ring *ep_ring;
2005 unsigned int slot_id;
2006 int ep_index;
2007 struct urb *urb = NULL;
2008 struct xhci_ep_ctx *ep_ctx;
2009 int ret = 0;
2010 struct urb_priv *urb_priv;
2011 u32 trb_comp_code;
2012
2013 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
2014 xdev = xhci->devs[slot_id];
2015 ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
2016 ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
2017 ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
2018 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2019
2020 if (skip)
2021 goto td_cleanup;
2022
2023 if (trb_comp_code == COMP_STOP_INVAL ||
2024 trb_comp_code == COMP_STOP) {
2025 /* The Endpoint Stop Command completion will take care of any
2026 * stopped TDs. A stopped TD may be restarted, so don't update
2027 * the ring dequeue pointer or take this TD off any lists yet.
2028 */
2029 ep->stopped_td = td;
2030 return 0;
2031 } else {
2032 if (trb_comp_code == COMP_STALL) {
2033 /* The transfer is completed from the driver's
2034 * perspective, but we need to issue a set dequeue
2035 * command for this stalled endpoint to move the dequeue
2036 * pointer past the TD. We can't do that here because
2037 * the halt condition must be cleared first. Let the
2038 * USB class driver clear the stall later.
2039 */
2040 ep->stopped_td = td;
2041 ep->stopped_stream = ep_ring->stream_id;
2042 } else if (xhci_requires_manual_halt_cleanup(xhci,
2043 ep_ctx, trb_comp_code)) {
2044 /* Other types of errors halt the endpoint, but the
2045 * class driver doesn't call usb_reset_endpoint() unless
2046 * the error is -EPIPE. Clear the halted status in the
2047 * xHCI hardware manually.
2048 */
2049 xhci_cleanup_halted_endpoint(xhci,
2050 slot_id, ep_index, ep_ring->stream_id,
2051 td, event_trb);
2052 } else {
2053 /* Update ring dequeue pointer */
2054 while (ep_ring->dequeue != td->last_trb)
2055 inc_deq(xhci, ep_ring);
2056 inc_deq(xhci, ep_ring);
2057 }
2058
2059td_cleanup:
2060 /* Clean up the endpoint's TD list */
2061 urb = td->urb;
2062 urb_priv = urb->hcpriv;
2063
2064 /* Do one last check of the actual transfer length.
2065 * If the host controller said we transferred more data than
2066 * the buffer length, urb->actual_length will be a very big
2067 * number (since it's unsigned). Play it safe and say we didn't
2068 * transfer anything.
2069 */
2070 if (urb->actual_length > urb->transfer_buffer_length) {
2071 xhci_warn(xhci, "URB transfer length is wrong, "
2072 "xHC issue? req. len = %u, "
2073 "act. len = %u\n",
2074 urb->transfer_buffer_length,
2075 urb->actual_length);
2076 urb->actual_length = 0;
2077 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
2078 *status = -EREMOTEIO;
2079 else
2080 *status = 0;
2081 }
2082 list_del_init(&td->td_list);
2083 /* Was this TD slated to be cancelled but completed anyway? */
2084 if (!list_empty(&td->cancelled_td_list))
2085 list_del_init(&td->cancelled_td_list);
2086
2087 urb_priv->td_cnt++;
2088 /* Giveback the urb when all the tds are completed */
2089 if (urb_priv->td_cnt == urb_priv->length) {
2090 ret = 1;
2091 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
2092 xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
2093 if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs
2094 == 0) {
2095 if (xhci->quirks & XHCI_AMD_PLL_FIX)
2096 usb_amd_quirk_pll_enable();
2097 }
2098 }
2099 }
2100 }
2101
2102 return ret;
2103}
2104
2105/*
2106 * Process control tds, update urb status and actual_length.
2107 */
2108static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
2109 union xhci_trb *event_trb, struct xhci_transfer_event *event,
2110 struct xhci_virt_ep *ep, int *status)
2111{
2112 struct xhci_virt_device *xdev;
2113 struct xhci_ring *ep_ring;
2114 unsigned int slot_id;
2115 int ep_index;
2116 struct xhci_ep_ctx *ep_ctx;
2117 u32 trb_comp_code;
2118
2119 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
2120 xdev = xhci->devs[slot_id];
2121 ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
2122 ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
2123 ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
2124 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2125
2126 switch (trb_comp_code) {
2127 case COMP_SUCCESS:
2128 if (event_trb == ep_ring->dequeue) {
2129 xhci_warn(xhci, "WARN: Success on ctrl setup TRB "
2130 "without IOC set??\n");
2131 *status = -ESHUTDOWN;
2132 } else if (event_trb != td->last_trb) {
2133 xhci_warn(xhci, "WARN: Success on ctrl data TRB "
2134 "without IOC set??\n");
2135 *status = -ESHUTDOWN;
2136 } else {
2137 *status = 0;
2138 }
2139 break;
2140 case COMP_SHORT_TX:
2141 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
2142 *status = -EREMOTEIO;
2143 else
2144 *status = 0;
2145 break;
2146 case COMP_STOP_INVAL:
2147 case COMP_STOP:
2148 return finish_td(xhci, td, event_trb, event, ep, status, false);
2149 default:
2150 if (!xhci_requires_manual_halt_cleanup(xhci,
2151 ep_ctx, trb_comp_code))
2152 break;
2153 xhci_dbg(xhci, "TRB error code %u, "
2154 "halted endpoint index = %u\n",
2155 trb_comp_code, ep_index);
2156 /* else fall through */
2157 case COMP_STALL:
2158 /* Did we transfer part of the data (middle) phase? */
2159 if (event_trb != ep_ring->dequeue &&
2160 event_trb != td->last_trb)
2161 td->urb->actual_length =
2162 td->urb->transfer_buffer_length -
2163 EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
2164 else
2165 td->urb->actual_length = 0;
2166
2167 xhci_cleanup_halted_endpoint(xhci,
2168 slot_id, ep_index, 0, td, event_trb);
2169 return finish_td(xhci, td, event_trb, event, ep, status, true);
2170 }
2171 /*
2172 * Did we transfer any data, despite the errors that might have
2173 * happened? I.e. did we get past the setup stage?
2174 */
2175 if (event_trb != ep_ring->dequeue) {
2176 /* The event was for the status stage */
2177 if (event_trb == td->last_trb) {
2178 if (td->urb->actual_length != 0) {
2179 /* Don't overwrite a previously set error code
2180 */
2181 if ((*status == -EINPROGRESS || *status == 0) &&
2182 (td->urb->transfer_flags
2183 & URB_SHORT_NOT_OK))
2184 /* Did we already see a short data
2185 * stage? */
2186 *status = -EREMOTEIO;
2187 } else {
2188 td->urb->actual_length =
2189 td->urb->transfer_buffer_length;
2190 }
2191 } else {
2192 /* Maybe the event was for the data stage? */
2193 td->urb->actual_length =
2194 td->urb->transfer_buffer_length -
2195 EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
2196 xhci_dbg(xhci, "Waiting for status "
2197 "stage event\n");
2198 return 0;
2199 }
2200 }
2201
2202 return finish_td(xhci, td, event_trb, event, ep, status, false);
2203}
2204
2205/*
2206 * Process isochronous tds, update urb packet status and actual_length.
2207 */
2208static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
2209 union xhci_trb *event_trb, struct xhci_transfer_event *event,
2210 struct xhci_virt_ep *ep, int *status)
2211{
2212 struct xhci_ring *ep_ring;
2213 struct urb_priv *urb_priv;
2214 int idx;
2215 int len = 0;
2216 union xhci_trb *cur_trb;
2217 struct xhci_segment *cur_seg;
2218 struct usb_iso_packet_descriptor *frame;
2219 u32 trb_comp_code;
2220 bool skip_td = false;
2221
2222 ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
2223 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2224 urb_priv = td->urb->hcpriv;
2225 idx = urb_priv->td_cnt;
2226 frame = &td->urb->iso_frame_desc[idx];
2227
2228 /* handle completion code */
2229 switch (trb_comp_code) {
2230 case COMP_SUCCESS:
2231 if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
2232 frame->status = 0;
2233 break;
2234 }
2235 if ((xhci->quirks & XHCI_TRUST_TX_LENGTH))
2236 trb_comp_code = COMP_SHORT_TX;
2237 case COMP_SHORT_TX:
2238 frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
2239 -EREMOTEIO : 0;
2240 break;
2241 case COMP_BW_OVER:
2242 frame->status = -ECOMM;
2243 skip_td = true;
2244 break;
2245 case COMP_BUFF_OVER:
2246 case COMP_BABBLE:
2247 frame->status = -EOVERFLOW;
2248 skip_td = true;
2249 break;
2250 case COMP_DEV_ERR:
2251 case COMP_STALL:
2252 case COMP_TX_ERR:
2253 frame->status = -EPROTO;
2254 skip_td = true;
2255 break;
2256 case COMP_STOP:
2257 case COMP_STOP_INVAL:
2258 break;
2259 default:
2260 frame->status = -1;
2261 break;
2262 }
2263
2264 if (trb_comp_code == COMP_SUCCESS || skip_td) {
2265 frame->actual_length = frame->length;
2266 td->urb->actual_length += frame->length;
2267 } else {
2268 for (cur_trb = ep_ring->dequeue,
2269 cur_seg = ep_ring->deq_seg; cur_trb != event_trb;
2270 next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
2271 if (!TRB_TYPE_NOOP_LE32(cur_trb->generic.field[3]) &&
2272 !TRB_TYPE_LINK_LE32(cur_trb->generic.field[3]))
2273 len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
2274 }
2275 len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
2276 EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
2277
2278 if (trb_comp_code != COMP_STOP_INVAL) {
2279 frame->actual_length = len;
2280 td->urb->actual_length += len;
2281 }
2282 }
2283
2284 return finish_td(xhci, td, event_trb, event, ep, status, false);
2285}
2286
2287static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
2288 struct xhci_transfer_event *event,
2289 struct xhci_virt_ep *ep, int *status)
2290{
2291 struct xhci_ring *ep_ring;
2292 struct urb_priv *urb_priv;
2293 struct usb_iso_packet_descriptor *frame;
2294 int idx;
2295
2296 ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
2297 urb_priv = td->urb->hcpriv;
2298 idx = urb_priv->td_cnt;
2299 frame = &td->urb->iso_frame_desc[idx];
2300
2301 /* The transfer is partly done. */
2302 frame->status = -EXDEV;
2303
2304 /* calc actual length */
2305 frame->actual_length = 0;
2306
2307 /* Update ring dequeue pointer */
2308 while (ep_ring->dequeue != td->last_trb)
2309 inc_deq(xhci, ep_ring);
2310 inc_deq(xhci, ep_ring);
2311
2312 return finish_td(xhci, td, NULL, event, ep, status, true);
2313}
2314
2315/*
2316 * Process bulk and interrupt tds, update urb status and actual_length.
2317 */
2318static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
2319 union xhci_trb *event_trb, struct xhci_transfer_event *event,
2320 struct xhci_virt_ep *ep, int *status)
2321{
2322 struct xhci_ring *ep_ring;
2323 union xhci_trb *cur_trb;
2324 struct xhci_segment *cur_seg;
2325 u32 trb_comp_code;
2326
2327 ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
2328 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2329
2330 switch (trb_comp_code) {
2331 case COMP_SUCCESS:
2332 /* Double check that the HW transferred everything. */
2333 if (event_trb != td->last_trb ||
2334 EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
2335 xhci_warn(xhci, "WARN Successful completion "
2336 "on short TX\n");
2337 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
2338 *status = -EREMOTEIO;
2339 else
2340 *status = 0;
2341 if ((xhci->quirks & XHCI_TRUST_TX_LENGTH))
2342 trb_comp_code = COMP_SHORT_TX;
2343 } else {
2344 *status = 0;
2345 }
2346 break;
2347 case COMP_SHORT_TX:
2348 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
2349 *status = -EREMOTEIO;
2350 else
2351 *status = 0;
2352 break;
2353 default:
2354 /* Others already handled above */
2355 break;
2356 }
2357 if (trb_comp_code == COMP_SHORT_TX)
2358 xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
2359 "%d bytes untransferred\n",
2360 td->urb->ep->desc.bEndpointAddress,
2361 td->urb->transfer_buffer_length,
2362 EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)));
2363 /* Fast path - was this the last TRB in the TD for this URB? */
2364 if (event_trb == td->last_trb) {
2365 if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
2366 td->urb->actual_length =
2367 td->urb->transfer_buffer_length -
2368 EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
2369 if (td->urb->transfer_buffer_length <
2370 td->urb->actual_length) {
2371 xhci_warn(xhci, "HC gave bad length "
2372 "of %d bytes left\n",
2373 EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)));
2374 td->urb->actual_length = 0;
2375 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
2376 *status = -EREMOTEIO;
2377 else
2378 *status = 0;
2379 }
2380 /* Don't overwrite a previously set error code */
2381 if (*status == -EINPROGRESS) {
2382 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
2383 *status = -EREMOTEIO;
2384 else
2385 *status = 0;
2386 }
2387 } else {
2388 td->urb->actual_length =
2389 td->urb->transfer_buffer_length;
2390 /* Ignore a short packet completion if the
2391 * untransferred length was zero.
2392 */
2393 if (*status == -EREMOTEIO)
2394 *status = 0;
2395 }
2396 } else {
2397 /* Slow path - walk the list, starting from the dequeue
2398 * pointer, to get the actual length transferred.
2399 */
2400 td->urb->actual_length = 0;
2401 for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
2402 cur_trb != event_trb;
2403 next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
2404 if (!TRB_TYPE_NOOP_LE32(cur_trb->generic.field[3]) &&
2405 !TRB_TYPE_LINK_LE32(cur_trb->generic.field[3]))
2406 td->urb->actual_length +=
2407 TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
2408 }
2409 /* If the ring didn't stop on a Link or No-op TRB, add
2410 * in the actual bytes transferred from the Normal TRB
2411 */
2412 if (trb_comp_code != COMP_STOP_INVAL)
2413 td->urb->actual_length +=
2414 TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
2415 EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
2416 }
2417
2418 return finish_td(xhci, td, event_trb, event, ep, status, false);
2419}
2420
2421/*
2422 * If this function returns an error condition, it means it got a Transfer
2423 * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
2424 * At this point, the host controller is probably hosed and should be reset.
2425 */
2426static int handle_tx_event(struct xhci_hcd *xhci,
2427 struct xhci_transfer_event *event)
2428 __releases(&xhci->lock)
2429 __acquires(&xhci->lock)
2430{
2431 struct xhci_virt_device *xdev;
2432 struct xhci_virt_ep *ep;
2433 struct xhci_ring *ep_ring;
2434 unsigned int slot_id;
2435 int ep_index;
2436 struct xhci_td *td = NULL;
2437 dma_addr_t event_dma;
2438 struct xhci_segment *event_seg;
2439 union xhci_trb *event_trb;
2440 struct urb *urb = NULL;
2441 int status = -EINPROGRESS;
2442 struct urb_priv *urb_priv;
2443 struct xhci_ep_ctx *ep_ctx;
2444 struct list_head *tmp;
2445 u32 trb_comp_code;
2446 int ret = 0;
2447 int td_num = 0;
2448
2449 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
2450 xdev = xhci->devs[slot_id];
2451 if (!xdev) {
2452 xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
2453 xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
2454 (unsigned long long) xhci_trb_virt_to_dma(
2455 xhci->event_ring->deq_seg,
2456 xhci->event_ring->dequeue),
2457 lower_32_bits(le64_to_cpu(event->buffer)),
2458 upper_32_bits(le64_to_cpu(event->buffer)),
2459 le32_to_cpu(event->transfer_len),
2460 le32_to_cpu(event->flags));
2461 xhci_dbg(xhci, "Event ring:\n");
2462 xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
2463 return -ENODEV;
2464 }
2465
2466 /* Endpoint ID is 1 based, our index is zero based */
2467 ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
2468 ep = &xdev->eps[ep_index];
2469 ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
2470 ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
2471 if (!ep_ring ||
2472 (le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) ==
2473 EP_STATE_DISABLED) {
2474 xhci_err(xhci, "ERROR Transfer event for disabled endpoint "
2475 "or incorrect stream ring\n");
2476 xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
2477 (unsigned long long) xhci_trb_virt_to_dma(
2478 xhci->event_ring->deq_seg,
2479 xhci->event_ring->dequeue),
2480 lower_32_bits(le64_to_cpu(event->buffer)),
2481 upper_32_bits(le64_to_cpu(event->buffer)),
2482 le32_to_cpu(event->transfer_len),
2483 le32_to_cpu(event->flags));
2484 xhci_dbg(xhci, "Event ring:\n");
2485 xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
2486 return -ENODEV;
2487 }
2488
2489 /* Count current td numbers if ep->skip is set */
2490 if (ep->skip) {
2491 list_for_each(tmp, &ep_ring->td_list)
2492 td_num++;
2493 }
2494
2495 event_dma = le64_to_cpu(event->buffer);
2496 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2497 /* Look for common error cases */
2498 switch (trb_comp_code) {
2499 /* Skip codes that require special handling depending on
2500 * transfer type
2501 */
2502 case COMP_SUCCESS:
2503 if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
2504 break;
2505 if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
2506 trb_comp_code = COMP_SHORT_TX;
2507 else
2508 xhci_warn_ratelimited(xhci,
2509 "WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?\n");
2510 case COMP_SHORT_TX:
2511 break;
2512 case COMP_STOP:
2513 xhci_dbg(xhci, "Stopped on Transfer TRB\n");
2514 break;
2515 case COMP_STOP_INVAL:
2516 xhci_dbg(xhci, "Stopped on No-op or Link TRB\n");
2517 break;
2518 case COMP_STALL:
2519 xhci_dbg(xhci, "Stalled endpoint\n");
2520 ep->ep_state |= EP_HALTED;
2521 status = -EPIPE;
2522 break;
2523 case COMP_TRB_ERR:
2524 xhci_warn(xhci, "WARN: TRB error on endpoint\n");
2525 status = -EILSEQ;
2526 break;
2527 case COMP_SPLIT_ERR:
2528 case COMP_TX_ERR:
2529 xhci_dbg(xhci, "Transfer error on endpoint\n");
2530 status = -EPROTO;
2531 break;
2532 case COMP_BABBLE:
2533 xhci_dbg(xhci, "Babble error on endpoint\n");
2534 status = -EOVERFLOW;
2535 break;
2536 case COMP_DB_ERR:
2537 xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
2538 status = -ENOSR;
2539 break;
2540 case COMP_BW_OVER:
2541 xhci_warn(xhci, "WARN: bandwidth overrun event on endpoint\n");
2542 break;
2543 case COMP_BUFF_OVER:
2544 xhci_warn(xhci, "WARN: buffer overrun event on endpoint\n");
2545 break;
2546 case COMP_UNDERRUN:
2547 /*
2548 * When the Isoch ring is empty, the xHC will generate
2549 * a Ring Overrun Event for IN Isoch endpoint or Ring
2550 * Underrun Event for OUT Isoch endpoint.
2551 */
2552 xhci_dbg(xhci, "underrun event on endpoint\n");
2553 if (!list_empty(&ep_ring->td_list))
2554 xhci_dbg(xhci, "Underrun Event for slot %d ep %d "
2555 "still with TDs queued?\n",
2556 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
2557 ep_index);
2558 goto cleanup;
2559 case COMP_OVERRUN:
2560 xhci_dbg(xhci, "overrun event on endpoint\n");
2561 if (!list_empty(&ep_ring->td_list))
2562 xhci_dbg(xhci, "Overrun Event for slot %d ep %d "
2563 "still with TDs queued?\n",
2564 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
2565 ep_index);
2566 goto cleanup;
2567 case COMP_DEV_ERR:
2568 xhci_warn(xhci, "WARN: detect an incompatible device");
2569 status = -EPROTO;
2570 break;
2571 case COMP_MISSED_INT:
2572 /*
2573 * When encounter missed service error, one or more isoc tds
2574 * may be missed by xHC.
2575 * Set skip flag of the ep_ring; Complete the missed tds as
2576 * short transfer when process the ep_ring next time.
2577 */
2578 ep->skip = true;
2579 xhci_dbg(xhci, "Miss service interval error, set skip flag\n");
2580 goto cleanup;
2581 default:
2582 if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
2583 status = 0;
2584 break;
2585 }
2586 xhci_warn(xhci, "ERROR Unknown event condition, HC probably "
2587 "busted\n");
2588 goto cleanup;
2589 }
2590
2591 do {
2592 /* This TRB should be in the TD at the head of this ring's
2593 * TD list.
2594 */
2595 if (list_empty(&ep_ring->td_list)) {
2596 /*
2597 * A stopped endpoint may generate an extra completion
2598 * event if the device was suspended. Don't print
2599 * warnings.
2600 */
2601 if (!(trb_comp_code == COMP_STOP ||
2602 trb_comp_code == COMP_STOP_INVAL)) {
2603 xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
2604 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
2605 ep_index);
2606 xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
2607 (le32_to_cpu(event->flags) &
2608 TRB_TYPE_BITMASK)>>10);
2609 xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
2610 }
2611 if (ep->skip) {
2612 ep->skip = false;
2613 xhci_dbg(xhci, "td_list is empty while skip "
2614 "flag set. Clear skip flag.\n");
2615 }
2616 ret = 0;
2617 goto cleanup;
2618 }
2619
2620 /* We've skipped all the TDs on the ep ring when ep->skip set */
2621 if (ep->skip && td_num == 0) {
2622 ep->skip = false;
2623 xhci_dbg(xhci, "All tds on the ep_ring skipped. "
2624 "Clear skip flag.\n");
2625 ret = 0;
2626 goto cleanup;
2627 }
2628
2629 td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
2630 if (ep->skip)
2631 td_num--;
2632
2633 /* Is this a TRB in the currently executing TD? */
2634 event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
2635 td->last_trb, event_dma);
2636
2637 /*
2638 * Skip the Force Stopped Event. The event_trb(event_dma) of FSE
2639 * is not in the current TD pointed by ep_ring->dequeue because
2640 * that the hardware dequeue pointer still at the previous TRB
2641 * of the current TD. The previous TRB maybe a Link TD or the
2642 * last TRB of the previous TD. The command completion handle
2643 * will take care the rest.
2644 */
2645 if (!event_seg && trb_comp_code == COMP_STOP_INVAL) {
2646 ret = 0;
2647 goto cleanup;
2648 }
2649
2650 if (!event_seg) {
2651 if (!ep->skip ||
2652 !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
2653 /* Some host controllers give a spurious
2654 * successful event after a short transfer.
2655 * Ignore it.
2656 */
2657 if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) &&
2658 ep_ring->last_td_was_short) {
2659 ep_ring->last_td_was_short = false;
2660 ret = 0;
2661 goto cleanup;
2662 }
2663 /* HC is busted, give up! */
2664 xhci_err(xhci,
2665 "ERROR Transfer event TRB DMA ptr not "
2666 "part of current TD\n");
2667 return -ESHUTDOWN;
2668 }
2669
2670 ret = skip_isoc_td(xhci, td, event, ep, &status);
2671 goto cleanup;
2672 }
2673 if (trb_comp_code == COMP_SHORT_TX)
2674 ep_ring->last_td_was_short = true;
2675 else
2676 ep_ring->last_td_was_short = false;
2677
2678 if (ep->skip) {
2679 xhci_dbg(xhci, "Found td. Clear skip flag.\n");
2680 ep->skip = false;
2681 }
2682
2683 event_trb = &event_seg->trbs[(event_dma - event_seg->dma) /
2684 sizeof(*event_trb)];
2685 /*
2686 * No-op TRB should not trigger interrupts.
2687 * If event_trb is a no-op TRB, it means the
2688 * corresponding TD has been cancelled. Just ignore
2689 * the TD.
2690 */
2691 if (TRB_TYPE_NOOP_LE32(event_trb->generic.field[3])) {
2692 xhci_dbg(xhci,
2693 "event_trb is a no-op TRB. Skip it\n");
2694 goto cleanup;
2695 }
2696
2697 /* Now update the urb's actual_length and give back to
2698 * the core
2699 */
2700 if (usb_endpoint_xfer_control(&td->urb->ep->desc))
2701 ret = process_ctrl_td(xhci, td, event_trb, event, ep,
2702 &status);
2703 else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc))
2704 ret = process_isoc_td(xhci, td, event_trb, event, ep,
2705 &status);
2706 else
2707 ret = process_bulk_intr_td(xhci, td, event_trb, event,
2708 ep, &status);
2709
2710cleanup:
2711 /*
2712 * Do not update event ring dequeue pointer if ep->skip is set.
2713 * Will roll back to continue process missed tds.
2714 */
2715 if (trb_comp_code == COMP_MISSED_INT || !ep->skip) {
2716 inc_deq(xhci, xhci->event_ring);
2717 }
2718
2719 if (ret) {
2720 urb = td->urb;
2721 urb_priv = urb->hcpriv;
2722 /* Leave the TD around for the reset endpoint function
2723 * to use(but only if it's not a control endpoint,
2724 * since we already queued the Set TR dequeue pointer
2725 * command for stalled control endpoints).
2726 */
2727 if (usb_endpoint_xfer_control(&urb->ep->desc) ||
2728 (trb_comp_code != COMP_STALL &&
2729 trb_comp_code != COMP_BABBLE))
2730 xhci_urb_free_priv(xhci, urb_priv);
2731 else
2732 kfree(urb_priv);
2733
2734 usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
2735 if ((urb->actual_length != urb->transfer_buffer_length &&
2736 (urb->transfer_flags &
2737 URB_SHORT_NOT_OK)) ||
2738 (status != 0 &&
2739 !usb_endpoint_xfer_isoc(&urb->ep->desc)))
2740 xhci_dbg(xhci, "Giveback URB %p, len = %d, "
2741 "expected = %d, status = %d\n",
2742 urb, urb->actual_length,
2743 urb->transfer_buffer_length,
2744 status);
2745 spin_unlock(&xhci->lock);
2746 /* EHCI, UHCI, and OHCI always unconditionally set the
2747 * urb->status of an isochronous endpoint to 0.
2748 */
2749 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
2750 status = 0;
2751 usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status);
2752 spin_lock(&xhci->lock);
2753 }
2754
2755 /*
2756 * If ep->skip is set, it means there are missed tds on the
2757 * endpoint ring need to take care of.
2758 * Process them as short transfer until reach the td pointed by
2759 * the event.
2760 */
2761 } while (ep->skip && trb_comp_code != COMP_MISSED_INT);
2762
2763 return 0;
2764}
2765
2766/*
2767 * This function handles all OS-owned events on the event ring. It may drop
2768 * xhci->lock between event processing (e.g. to pass up port status changes).
2769 * Returns >0 for "possibly more events to process" (caller should call again),
2770 * otherwise 0 if done. In future, <0 returns should indicate error code.
2771 */
2772static int xhci_handle_event(struct xhci_hcd *xhci)
2773{
2774 union xhci_trb *event;
2775 int update_ptrs = 1;
2776 int ret;
2777
2778 if (!xhci->event_ring || !xhci->event_ring->dequeue) {
2779 xhci->error_bitmask |= 1 << 1;
2780 return 0;
2781 }
2782
2783 event = xhci->event_ring->dequeue;
2784 /* Does the HC or OS own the TRB? */
2785 if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) !=
2786 xhci->event_ring->cycle_state) {
2787 xhci->error_bitmask |= 1 << 2;
2788 return 0;
2789 }
2790
2791 /*
2792 * Barrier between reading the TRB_CYCLE (valid) flag above and any
2793 * speculative reads of the event's flags/data below.
2794 */
2795 rmb();
2796 /* FIXME: Handle more event types. */
2797 switch ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK)) {
2798 case TRB_TYPE(TRB_COMPLETION):
2799 handle_cmd_completion(xhci, &event->event_cmd);
2800 break;
2801 case TRB_TYPE(TRB_PORT_STATUS):
2802 handle_port_status(xhci, event);
2803 update_ptrs = 0;
2804 break;
2805 case TRB_TYPE(TRB_TRANSFER):
2806 ret = handle_tx_event(xhci, &event->trans_event);
2807 if (ret < 0)
2808 xhci->error_bitmask |= 1 << 9;
2809 else
2810 update_ptrs = 0;
2811 break;
2812 case TRB_TYPE(TRB_DEV_NOTE):
2813 handle_device_notification(xhci, event);
2814 break;
2815 default:
2816 if ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK) >=
2817 TRB_TYPE(48))
2818 handle_vendor_event(xhci, event);
2819 else
2820 xhci->error_bitmask |= 1 << 3;
2821 }
2822 /* Any of the above functions may drop and re-acquire the lock, so check
2823 * to make sure a watchdog timer didn't mark the host as non-responsive.
2824 */
2825 if (xhci->xhc_state & XHCI_STATE_DYING) {
2826 xhci_dbg(xhci, "xHCI host dying, returning from "
2827 "event handler.\n");
2828 return 0;
2829 }
2830
2831 if (update_ptrs)
2832 /* Update SW event ring dequeue pointer */
2833 inc_deq(xhci, xhci->event_ring);
2834
2835 /* Are there more items on the event ring? Caller will call us again to
2836 * check.
2837 */
2838 return 1;
2839}
2840
2841/*
2842 * xHCI spec says we can get an interrupt, and if the HC has an error condition,
2843 * we might get bad data out of the event ring. Section 4.10.2.7 has a list of
2844 * indicators of an event TRB error, but we check the status *first* to be safe.
2845 */
2846irqreturn_t xhci_irq(struct usb_hcd *hcd)
2847{
2848 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
2849 u32 status;
2850 u64 temp_64;
2851 union xhci_trb *event_ring_deq;
2852 dma_addr_t deq;
2853
2854 spin_lock(&xhci->lock);
2855 /* Check if the xHC generated the interrupt, or the irq is shared */
2856 status = readl(&xhci->op_regs->status);
2857 if (status == 0xffffffff)
2858 goto hw_died;
2859
2860 if (!(status & STS_EINT)) {
2861 spin_unlock(&xhci->lock);
2862 return IRQ_NONE;
2863 }
2864 if (status & STS_FATAL) {
2865 xhci_warn(xhci, "WARNING: Host System Error\n");
2866 xhci_halt(xhci);
2867hw_died:
2868 spin_unlock(&xhci->lock);
2869 return -ESHUTDOWN;
2870 }
2871
2872 /*
2873 * Clear the op reg interrupt status first,
2874 * so we can receive interrupts from other MSI-X interrupters.
2875 * Write 1 to clear the interrupt status.
2876 */
2877 status |= STS_EINT;
2878 writel(status, &xhci->op_regs->status);
2879 /* FIXME when MSI-X is supported and there are multiple vectors */
2880 /* Clear the MSI-X event interrupt status */
2881
2882 if (hcd->irq) {
2883 u32 irq_pending;
2884 /* Acknowledge the PCI interrupt */
2885 irq_pending = readl(&xhci->ir_set->irq_pending);
2886 irq_pending |= IMAN_IP;
2887 writel(irq_pending, &xhci->ir_set->irq_pending);
2888 }
2889
2890 if (xhci->xhc_state & XHCI_STATE_DYING) {
2891 xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
2892 "Shouldn't IRQs be disabled?\n");
2893 /* Clear the event handler busy flag (RW1C);
2894 * the event ring should be empty.
2895 */
2896 temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
2897 xhci_write_64(xhci, temp_64 | ERST_EHB,
2898 &xhci->ir_set->erst_dequeue);
2899 spin_unlock(&xhci->lock);
2900
2901 return IRQ_HANDLED;
2902 }
2903
2904 event_ring_deq = xhci->event_ring->dequeue;
2905 /* FIXME this should be a delayed service routine
2906 * that clears the EHB.
2907 */
2908 while (xhci_handle_event(xhci) > 0) {}
2909
2910 temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
2911 /* If necessary, update the HW's version of the event ring deq ptr. */
2912 if (event_ring_deq != xhci->event_ring->dequeue) {
2913 deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
2914 xhci->event_ring->dequeue);
2915 if (deq == 0)
2916 xhci_warn(xhci, "WARN something wrong with SW event "
2917 "ring dequeue ptr.\n");
2918 /* Update HC event ring dequeue pointer */
2919 temp_64 &= ERST_PTR_MASK;
2920 temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK);
2921 }
2922
2923 /* Clear the event handler busy flag (RW1C); event ring is empty. */
2924 temp_64 |= ERST_EHB;
2925 xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
2926
2927 spin_unlock(&xhci->lock);
2928
2929 return IRQ_HANDLED;
2930}
2931
2932irqreturn_t xhci_msi_irq(int irq, void *hcd)
2933{
2934 return xhci_irq(hcd);
2935}
2936
2937/**** Endpoint Ring Operations ****/
2938
2939/*
2940 * Generic function for queueing a TRB on a ring.
2941 * The caller must have checked to make sure there's room on the ring.
2942 *
2943 * @more_trbs_coming: Will you enqueue more TRBs before calling
2944 * prepare_transfer()?
2945 */
2946static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
2947 bool more_trbs_coming,
2948 u32 field1, u32 field2, u32 field3, u32 field4)
2949{
2950 struct xhci_generic_trb *trb;
2951
2952 trb = &ring->enqueue->generic;
2953 trb->field[0] = cpu_to_le32(field1);
2954 trb->field[1] = cpu_to_le32(field2);
2955 trb->field[2] = cpu_to_le32(field3);
2956 trb->field[3] = cpu_to_le32(field4);
2957 inc_enq(xhci, ring, more_trbs_coming);
2958}
2959
2960/*
2961 * Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
2962 * FIXME allocate segments if the ring is full.
2963 */
2964static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
2965 u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
2966{
2967 unsigned int num_trbs_needed;
2968
2969 /* Make sure the endpoint has been added to xHC schedule */
2970 switch (ep_state) {
2971 case EP_STATE_DISABLED:
2972 /*
2973 * USB core changed config/interfaces without notifying us,
2974 * or hardware is reporting the wrong state.
2975 */
2976 xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
2977 return -ENOENT;
2978 case EP_STATE_ERROR:
2979 xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
2980 /* FIXME event handling code for error needs to clear it */
2981 /* XXX not sure if this should be -ENOENT or not */
2982 return -EINVAL;
2983 case EP_STATE_HALTED:
2984 xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
2985 case EP_STATE_STOPPED:
2986 case EP_STATE_RUNNING:
2987 break;
2988 default:
2989 xhci_err(xhci, "ERROR unknown endpoint state for ep\n");
2990 /*
2991 * FIXME issue Configure Endpoint command to try to get the HC
2992 * back into a known state.
2993 */
2994 return -EINVAL;
2995 }
2996
2997 while (1) {
2998 if (room_on_ring(xhci, ep_ring, num_trbs))
2999 break;
3000
3001 if (ep_ring == xhci->cmd_ring) {
3002 xhci_err(xhci, "Do not support expand command ring\n");
3003 return -ENOMEM;
3004 }
3005
3006 xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion,
3007 "ERROR no room on ep ring, try ring expansion");
3008 num_trbs_needed = num_trbs - ep_ring->num_trbs_free;
3009 if (xhci_ring_expansion(xhci, ep_ring, num_trbs_needed,
3010 mem_flags)) {
3011 xhci_err(xhci, "Ring expansion failed\n");
3012 return -ENOMEM;
3013 }
3014 }
3015
3016 if (enqueue_is_link_trb(ep_ring)) {
3017 struct xhci_ring *ring = ep_ring;
3018 union xhci_trb *next;
3019
3020 next = ring->enqueue;
3021
3022 while (last_trb(xhci, ring, ring->enq_seg, next)) {
3023 /* If we're not dealing with 0.95 hardware or isoc rings
3024 * on AMD 0.96 host, clear the chain bit.
3025 */
3026 if (!xhci_link_trb_quirk(xhci) &&
3027 !(ring->type == TYPE_ISOC &&
3028 (xhci->quirks & XHCI_AMD_0x96_HOST)))
3029 next->link.control &= cpu_to_le32(~TRB_CHAIN);
3030 else
3031 next->link.control |= cpu_to_le32(TRB_CHAIN);
3032
3033 wmb();
3034 next->link.control ^= cpu_to_le32(TRB_CYCLE);
3035
3036 /* Toggle the cycle bit after the last ring segment. */
3037 if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
3038 ring->cycle_state = (ring->cycle_state ? 0 : 1);
3039 }
3040 ring->enq_seg = ring->enq_seg->next;
3041 ring->enqueue = ring->enq_seg->trbs;
3042 next = ring->enqueue;
3043 }
3044 }
3045
3046 return 0;
3047}
3048
3049static int prepare_transfer(struct xhci_hcd *xhci,
3050 struct xhci_virt_device *xdev,
3051 unsigned int ep_index,
3052 unsigned int stream_id,
3053 unsigned int num_trbs,
3054 struct urb *urb,
3055 unsigned int td_index,
3056 gfp_t mem_flags)
3057{
3058 int ret;
3059 struct urb_priv *urb_priv;
3060 struct xhci_td *td;
3061 struct xhci_ring *ep_ring;
3062 struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
3063
3064 ep_ring = xhci_stream_id_to_ring(xdev, ep_index, stream_id);
3065 if (!ep_ring) {
3066 xhci_dbg(xhci, "Can't prepare ring for bad stream ID %u\n",
3067 stream_id);
3068 return -EINVAL;
3069 }
3070
3071 ret = prepare_ring(xhci, ep_ring,
3072 le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK,
3073 num_trbs, mem_flags);
3074 if (ret)
3075 return ret;
3076
3077 urb_priv = urb->hcpriv;
3078 td = urb_priv->td[td_index];
3079
3080 INIT_LIST_HEAD(&td->td_list);
3081 INIT_LIST_HEAD(&td->cancelled_td_list);
3082
3083 if (td_index == 0) {
3084 ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb);
3085 if (unlikely(ret))
3086 return ret;
3087 }
3088
3089 td->urb = urb;
3090 /* Add this TD to the tail of the endpoint ring's TD list */
3091 list_add_tail(&td->td_list, &ep_ring->td_list);
3092 td->start_seg = ep_ring->enq_seg;
3093 td->first_trb = ep_ring->enqueue;
3094
3095 urb_priv->td[td_index] = td;
3096
3097 return 0;
3098}
3099
3100static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
3101{
3102 int num_sgs, num_trbs, running_total, temp, i;
3103 struct scatterlist *sg;
3104
3105 sg = NULL;
3106 num_sgs = urb->num_mapped_sgs;
3107 temp = urb->transfer_buffer_length;
3108
3109 num_trbs = 0;
3110 for_each_sg(urb->sg, sg, num_sgs, i) {
3111 unsigned int len = sg_dma_len(sg);
3112
3113 /* Scatter gather list entries may cross 64KB boundaries */
3114 running_total = TRB_MAX_BUFF_SIZE -
3115 (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1));
3116 running_total &= TRB_MAX_BUFF_SIZE - 1;
3117 if (running_total != 0)
3118 num_trbs++;
3119
3120 /* How many more 64KB chunks to transfer, how many more TRBs? */
3121 while (running_total < sg_dma_len(sg) && running_total < temp) {
3122 num_trbs++;
3123 running_total += TRB_MAX_BUFF_SIZE;
3124 }
3125 len = min_t(int, len, temp);
3126 temp -= len;
3127 if (temp == 0)
3128 break;
3129 }
3130 return num_trbs;
3131}
3132
3133static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
3134{
3135 if (num_trbs != 0)
3136 dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
3137 "TRBs, %d left\n", __func__,
3138 urb->ep->desc.bEndpointAddress, num_trbs);
3139 if (running_total != urb->transfer_buffer_length)
3140 dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
3141 "queued %#x (%d), asked for %#x (%d)\n",
3142 __func__,
3143 urb->ep->desc.bEndpointAddress,
3144 running_total, running_total,
3145 urb->transfer_buffer_length,
3146 urb->transfer_buffer_length);
3147}
3148
3149static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
3150 unsigned int ep_index, unsigned int stream_id, int start_cycle,
3151 struct xhci_generic_trb *start_trb)
3152{
3153 /*
3154 * Pass all the TRBs to the hardware at once and make sure this write
3155 * isn't reordered.
3156 */
3157 wmb();
3158 if (start_cycle)
3159 start_trb->field[3] |= cpu_to_le32(start_cycle);
3160 else
3161 start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
3162 xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
3163}
3164
3165/*
3166 * xHCI uses normal TRBs for both bulk and interrupt. When the interrupt
3167 * endpoint is to be serviced, the xHC will consume (at most) one TD. A TD
3168 * (comprised of sg list entries) can take several service intervals to
3169 * transmit.
3170 */
3171int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3172 struct urb *urb, int slot_id, unsigned int ep_index)
3173{
3174 struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci,
3175 xhci->devs[slot_id]->out_ctx, ep_index);
3176 int xhci_interval;
3177 int ep_interval;
3178
3179 xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info));
3180 ep_interval = urb->interval;
3181 /* Convert to microframes */
3182 if (urb->dev->speed == USB_SPEED_LOW ||
3183 urb->dev->speed == USB_SPEED_FULL)
3184 ep_interval *= 8;
3185 /* FIXME change this to a warning and a suggestion to use the new API
3186 * to set the polling interval (once the API is added).
3187 */
3188 if (xhci_interval != ep_interval) {
3189 dev_dbg_ratelimited(&urb->dev->dev,
3190 "Driver uses different interval (%d microframe%s) than xHCI (%d microframe%s)\n",
3191 ep_interval, ep_interval == 1 ? "" : "s",
3192 xhci_interval, xhci_interval == 1 ? "" : "s");
3193 urb->interval = xhci_interval;
3194 /* Convert back to frames for LS/FS devices */
3195 if (urb->dev->speed == USB_SPEED_LOW ||
3196 urb->dev->speed == USB_SPEED_FULL)
3197 urb->interval /= 8;
3198 }
3199 return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
3200}
3201
3202/*
3203 * The TD size is the number of bytes remaining in the TD (including this TRB),
3204 * right shifted by 10.
3205 * It must fit in bits 21:17, so it can't be bigger than 31.
3206 */
3207static u32 xhci_td_remainder(unsigned int remainder)
3208{
3209 u32 max = (1 << (21 - 17 + 1)) - 1;
3210
3211 if ((remainder >> 10) >= max)
3212 return max << 17;
3213 else
3214 return (remainder >> 10) << 17;
3215}
3216
3217/*
3218 * For xHCI 1.0 host controllers, TD size is the number of max packet sized
3219 * packets remaining in the TD (*not* including this TRB).
3220 *
3221 * Total TD packet count = total_packet_count =
3222 * DIV_ROUND_UP(TD size in bytes / wMaxPacketSize)
3223 *
3224 * Packets transferred up to and including this TRB = packets_transferred =
3225 * rounddown(total bytes transferred including this TRB / wMaxPacketSize)
3226 *
3227 * TD size = total_packet_count - packets_transferred
3228 *
3229 * It must fit in bits 21:17, so it can't be bigger than 31.
3230 * The last TRB in a TD must have the TD size set to zero.
3231 */
3232static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len,
3233 unsigned int total_packet_count, struct urb *urb,
3234 unsigned int num_trbs_left)
3235{
3236 int packets_transferred;
3237
3238 /* One TRB with a zero-length data packet. */
3239 if (num_trbs_left == 0 || (running_total == 0 && trb_buff_len == 0))
3240 return 0;
3241
3242 /* All the TRB queueing functions don't count the current TRB in
3243 * running_total.
3244 */
3245 packets_transferred = (running_total + trb_buff_len) /
3246 GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
3247
3248 if ((total_packet_count - packets_transferred) > 31)
3249 return 31 << 17;
3250 return (total_packet_count - packets_transferred) << 17;
3251}
3252
3253static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3254 struct urb *urb, int slot_id, unsigned int ep_index)
3255{
3256 struct xhci_ring *ep_ring;
3257 unsigned int num_trbs;
3258 struct urb_priv *urb_priv;
3259 struct xhci_td *td;
3260 struct scatterlist *sg;
3261 int num_sgs;
3262 int trb_buff_len, this_sg_len, running_total;
3263 unsigned int total_packet_count;
3264 bool first_trb;
3265 u64 addr;
3266 bool more_trbs_coming;
3267
3268 struct xhci_generic_trb *start_trb;
3269 int start_cycle;
3270
3271 ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
3272 if (!ep_ring)
3273 return -EINVAL;
3274
3275 num_trbs = count_sg_trbs_needed(xhci, urb);
3276 num_sgs = urb->num_mapped_sgs;
3277 total_packet_count = DIV_ROUND_UP(urb->transfer_buffer_length,
3278 usb_endpoint_maxp(&urb->ep->desc));
3279
3280 trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
3281 ep_index, urb->stream_id,
3282 num_trbs, urb, 0, mem_flags);
3283 if (trb_buff_len < 0)
3284 return trb_buff_len;
3285
3286 urb_priv = urb->hcpriv;
3287 td = urb_priv->td[0];
3288
3289 /*
3290 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3291 * until we've finished creating all the other TRBs. The ring's cycle
3292 * state may change as we enqueue the other TRBs, so save it too.
3293 */
3294 start_trb = &ep_ring->enqueue->generic;
3295 start_cycle = ep_ring->cycle_state;
3296
3297 running_total = 0;
3298 /*
3299 * How much data is in the first TRB?
3300 *
3301 * There are three forces at work for TRB buffer pointers and lengths:
3302 * 1. We don't want to walk off the end of this sg-list entry buffer.
3303 * 2. The transfer length that the driver requested may be smaller than
3304 * the amount of memory allocated for this scatter-gather list.
3305 * 3. TRBs buffers can't cross 64KB boundaries.
3306 */
3307 sg = urb->sg;
3308 addr = (u64) sg_dma_address(sg);
3309 this_sg_len = sg_dma_len(sg);
3310 trb_buff_len = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1));
3311 trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
3312 if (trb_buff_len > urb->transfer_buffer_length)
3313 trb_buff_len = urb->transfer_buffer_length;
3314
3315 first_trb = true;
3316 /* Queue the first TRB, even if it's zero-length */
3317 do {
3318 u32 field = 0;
3319 u32 length_field = 0;
3320 u32 remainder = 0;
3321
3322 /* Don't change the cycle bit of the first TRB until later */
3323 if (first_trb) {
3324 first_trb = false;
3325 if (start_cycle == 0)
3326 field |= 0x1;
3327 } else
3328 field |= ep_ring->cycle_state;
3329
3330 /* Chain all the TRBs together; clear the chain bit in the last
3331 * TRB to indicate it's the last TRB in the chain.
3332 */
3333 if (num_trbs > 1) {
3334 field |= TRB_CHAIN;
3335 } else {
3336 /* FIXME - add check for ZERO_PACKET flag before this */
3337 td->last_trb = ep_ring->enqueue;
3338 field |= TRB_IOC;
3339 }
3340
3341 /* Only set interrupt on short packet for IN endpoints */
3342 if (usb_urb_dir_in(urb))
3343 field |= TRB_ISP;
3344
3345 if (TRB_MAX_BUFF_SIZE -
3346 (addr & (TRB_MAX_BUFF_SIZE - 1)) < trb_buff_len) {
3347 xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n");
3348 xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n",
3349 (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
3350 (unsigned int) addr + trb_buff_len);
3351 }
3352
3353 /* Set the TRB length, TD size, and interrupter fields. */
3354 if (xhci->hci_version < 0x100) {
3355 remainder = xhci_td_remainder(
3356 urb->transfer_buffer_length -
3357 running_total);
3358 } else {
3359 remainder = xhci_v1_0_td_remainder(running_total,
3360 trb_buff_len, total_packet_count, urb,
3361 num_trbs - 1);
3362 }
3363 length_field = TRB_LEN(trb_buff_len) |
3364 remainder |
3365 TRB_INTR_TARGET(0);
3366
3367 if (num_trbs > 1)
3368 more_trbs_coming = true;
3369 else
3370 more_trbs_coming = false;
3371 queue_trb(xhci, ep_ring, more_trbs_coming,
3372 lower_32_bits(addr),
3373 upper_32_bits(addr),
3374 length_field,
3375 field | TRB_TYPE(TRB_NORMAL));
3376 --num_trbs;
3377 running_total += trb_buff_len;
3378
3379 /* Calculate length for next transfer --
3380 * Are we done queueing all the TRBs for this sg entry?
3381 */
3382 this_sg_len -= trb_buff_len;
3383 if (this_sg_len == 0) {
3384 --num_sgs;
3385 if (num_sgs == 0)
3386 break;
3387 sg = sg_next(sg);
3388 addr = (u64) sg_dma_address(sg);
3389 this_sg_len = sg_dma_len(sg);
3390 } else {
3391 addr += trb_buff_len;
3392 }
3393
3394 trb_buff_len = TRB_MAX_BUFF_SIZE -
3395 (addr & (TRB_MAX_BUFF_SIZE - 1));
3396 trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
3397 if (running_total + trb_buff_len > urb->transfer_buffer_length)
3398 trb_buff_len =
3399 urb->transfer_buffer_length - running_total;
3400 } while (running_total < urb->transfer_buffer_length);
3401
3402 check_trb_math(urb, num_trbs, running_total);
3403 giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
3404 start_cycle, start_trb);
3405 return 0;
3406}
3407
3408/* This is very similar to what ehci-q.c qtd_fill() does */
3409int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3410 struct urb *urb, int slot_id, unsigned int ep_index)
3411{
3412 struct xhci_ring *ep_ring;
3413 struct urb_priv *urb_priv;
3414 struct xhci_td *td;
3415 int num_trbs;
3416 struct xhci_generic_trb *start_trb;
3417 bool first_trb;
3418 bool more_trbs_coming;
3419 int start_cycle;
3420 u32 field, length_field;
3421
3422 int running_total, trb_buff_len, ret;
3423 unsigned int total_packet_count;
3424 u64 addr;
3425
3426 if (urb->num_sgs)
3427 return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
3428
3429 ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
3430 if (!ep_ring)
3431 return -EINVAL;
3432
3433 num_trbs = 0;
3434 /* How much data is (potentially) left before the 64KB boundary? */
3435 running_total = TRB_MAX_BUFF_SIZE -
3436 (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1));
3437 running_total &= TRB_MAX_BUFF_SIZE - 1;
3438
3439 /* If there's some data on this 64KB chunk, or we have to send a
3440 * zero-length transfer, we need at least one TRB
3441 */
3442 if (running_total != 0 || urb->transfer_buffer_length == 0)
3443 num_trbs++;
3444 /* How many more 64KB chunks to transfer, how many more TRBs? */
3445 while (running_total < urb->transfer_buffer_length) {
3446 num_trbs++;
3447 running_total += TRB_MAX_BUFF_SIZE;
3448 }
3449 /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
3450
3451 ret = prepare_transfer(xhci, xhci->devs[slot_id],
3452 ep_index, urb->stream_id,
3453 num_trbs, urb, 0, mem_flags);
3454 if (ret < 0)
3455 return ret;
3456
3457 urb_priv = urb->hcpriv;
3458 td = urb_priv->td[0];
3459
3460 /*
3461 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3462 * until we've finished creating all the other TRBs. The ring's cycle
3463 * state may change as we enqueue the other TRBs, so save it too.
3464 */
3465 start_trb = &ep_ring->enqueue->generic;
3466 start_cycle = ep_ring->cycle_state;
3467
3468 running_total = 0;
3469 total_packet_count = DIV_ROUND_UP(urb->transfer_buffer_length,
3470 usb_endpoint_maxp(&urb->ep->desc));
3471 /* How much data is in the first TRB? */
3472 addr = (u64) urb->transfer_dma;
3473 trb_buff_len = TRB_MAX_BUFF_SIZE -
3474 (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1));
3475 if (trb_buff_len > urb->transfer_buffer_length)
3476 trb_buff_len = urb->transfer_buffer_length;
3477
3478 first_trb = true;
3479
3480 /* Queue the first TRB, even if it's zero-length */
3481 do {
3482 u32 remainder = 0;
3483 field = 0;
3484
3485 /* Don't change the cycle bit of the first TRB until later */
3486 if (first_trb) {
3487 first_trb = false;
3488 if (start_cycle == 0)
3489 field |= 0x1;
3490 } else
3491 field |= ep_ring->cycle_state;
3492
3493 /* Chain all the TRBs together; clear the chain bit in the last
3494 * TRB to indicate it's the last TRB in the chain.
3495 */
3496 if (num_trbs > 1) {
3497 field |= TRB_CHAIN;
3498 } else {
3499 /* FIXME - add check for ZERO_PACKET flag before this */
3500 td->last_trb = ep_ring->enqueue;
3501 field |= TRB_IOC;
3502 }
3503
3504 /* Only set interrupt on short packet for IN endpoints */
3505 if (usb_urb_dir_in(urb))
3506 field |= TRB_ISP;
3507
3508 /* Set the TRB length, TD size, and interrupter fields. */
3509 if (xhci->hci_version < 0x100) {
3510 remainder = xhci_td_remainder(
3511 urb->transfer_buffer_length -
3512 running_total);
3513 } else {
3514 remainder = xhci_v1_0_td_remainder(running_total,
3515 trb_buff_len, total_packet_count, urb,
3516 num_trbs - 1);
3517 }
3518 length_field = TRB_LEN(trb_buff_len) |
3519 remainder |
3520 TRB_INTR_TARGET(0);
3521
3522 if (num_trbs > 1)
3523 more_trbs_coming = true;
3524 else
3525 more_trbs_coming = false;
3526 queue_trb(xhci, ep_ring, more_trbs_coming,
3527 lower_32_bits(addr),
3528 upper_32_bits(addr),
3529 length_field,
3530 field | TRB_TYPE(TRB_NORMAL));
3531 --num_trbs;
3532 running_total += trb_buff_len;
3533
3534 /* Calculate length for next transfer */
3535 addr += trb_buff_len;
3536 trb_buff_len = urb->transfer_buffer_length - running_total;
3537 if (trb_buff_len > TRB_MAX_BUFF_SIZE)
3538 trb_buff_len = TRB_MAX_BUFF_SIZE;
3539 } while (running_total < urb->transfer_buffer_length);
3540
3541 check_trb_math(urb, num_trbs, running_total);
3542 giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
3543 start_cycle, start_trb);
3544 return 0;
3545}
3546
3547/* Caller must have locked xhci->lock */
3548int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3549 struct urb *urb, int slot_id, unsigned int ep_index)
3550{
3551 struct xhci_ring *ep_ring;
3552 int num_trbs;
3553 int ret;
3554 struct usb_ctrlrequest *setup;
3555 struct xhci_generic_trb *start_trb;
3556 int start_cycle;
3557 u32 field, length_field;
3558 struct urb_priv *urb_priv;
3559 struct xhci_td *td;
3560
3561 ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
3562 if (!ep_ring)
3563 return -EINVAL;
3564
3565 /*
3566 * Need to copy setup packet into setup TRB, so we can't use the setup
3567 * DMA address.
3568 */
3569 if (!urb->setup_packet)
3570 return -EINVAL;
3571
3572 /* 1 TRB for setup, 1 for status */
3573 num_trbs = 2;
3574 /*
3575 * Don't need to check if we need additional event data and normal TRBs,
3576 * since data in control transfers will never get bigger than 16MB
3577 * XXX: can we get a buffer that crosses 64KB boundaries?
3578 */
3579 if (urb->transfer_buffer_length > 0)
3580 num_trbs++;
3581 ret = prepare_transfer(xhci, xhci->devs[slot_id],
3582 ep_index, urb->stream_id,
3583 num_trbs, urb, 0, mem_flags);
3584 if (ret < 0)
3585 return ret;
3586
3587 urb_priv = urb->hcpriv;
3588 td = urb_priv->td[0];
3589
3590 /*
3591 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3592 * until we've finished creating all the other TRBs. The ring's cycle
3593 * state may change as we enqueue the other TRBs, so save it too.
3594 */
3595 start_trb = &ep_ring->enqueue->generic;
3596 start_cycle = ep_ring->cycle_state;
3597
3598 /* Queue setup TRB - see section 6.4.1.2.1 */
3599 /* FIXME better way to translate setup_packet into two u32 fields? */
3600 setup = (struct usb_ctrlrequest *) urb->setup_packet;
3601 field = 0;
3602 field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
3603 if (start_cycle == 0)
3604 field |= 0x1;
3605
3606 /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
3607 if (xhci->hci_version == 0x100) {
3608 if (urb->transfer_buffer_length > 0) {
3609 if (setup->bRequestType & USB_DIR_IN)
3610 field |= TRB_TX_TYPE(TRB_DATA_IN);
3611 else
3612 field |= TRB_TX_TYPE(TRB_DATA_OUT);
3613 }
3614 }
3615
3616 queue_trb(xhci, ep_ring, true,
3617 setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16,
3618 le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16,
3619 TRB_LEN(8) | TRB_INTR_TARGET(0),
3620 /* Immediate data in pointer */
3621 field);
3622
3623 /* If there's data, queue data TRBs */
3624 /* Only set interrupt on short packet for IN endpoints */
3625 if (usb_urb_dir_in(urb))
3626 field = TRB_ISP | TRB_TYPE(TRB_DATA);
3627 else
3628 field = TRB_TYPE(TRB_DATA);
3629
3630 length_field = TRB_LEN(urb->transfer_buffer_length) |
3631 xhci_td_remainder(urb->transfer_buffer_length) |
3632 TRB_INTR_TARGET(0);
3633 if (urb->transfer_buffer_length > 0) {
3634 if (setup->bRequestType & USB_DIR_IN)
3635 field |= TRB_DIR_IN;
3636 queue_trb(xhci, ep_ring, true,
3637 lower_32_bits(urb->transfer_dma),
3638 upper_32_bits(urb->transfer_dma),
3639 length_field,
3640 field | ep_ring->cycle_state);
3641 }
3642
3643 /* Save the DMA address of the last TRB in the TD */
3644 td->last_trb = ep_ring->enqueue;
3645
3646 /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
3647 /* If the device sent data, the status stage is an OUT transfer */
3648 if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN)
3649 field = 0;
3650 else
3651 field = TRB_DIR_IN;
3652 queue_trb(xhci, ep_ring, false,
3653 0,
3654 0,
3655 TRB_INTR_TARGET(0),
3656 /* Event on completion */
3657 field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
3658
3659 giveback_first_trb(xhci, slot_id, ep_index, 0,
3660 start_cycle, start_trb);
3661 return 0;
3662}
3663
3664static int count_isoc_trbs_needed(struct xhci_hcd *xhci,
3665 struct urb *urb, int i)
3666{
3667 int num_trbs = 0;
3668 u64 addr, td_len;
3669
3670 addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
3671 td_len = urb->iso_frame_desc[i].length;
3672
3673 num_trbs = DIV_ROUND_UP(td_len + (addr & (TRB_MAX_BUFF_SIZE - 1)),
3674 TRB_MAX_BUFF_SIZE);
3675 if (num_trbs == 0)
3676 num_trbs++;
3677
3678 return num_trbs;
3679}
3680
3681/*
3682 * The transfer burst count field of the isochronous TRB defines the number of
3683 * bursts that are required to move all packets in this TD. Only SuperSpeed
3684 * devices can burst up to bMaxBurst number of packets per service interval.
3685 * This field is zero based, meaning a value of zero in the field means one
3686 * burst. Basically, for everything but SuperSpeed devices, this field will be
3687 * zero. Only xHCI 1.0 host controllers support this field.
3688 */
3689static unsigned int xhci_get_burst_count(struct xhci_hcd *xhci,
3690 struct usb_device *udev,
3691 struct urb *urb, unsigned int total_packet_count)
3692{
3693 unsigned int max_burst;
3694
3695 if (xhci->hci_version < 0x100 || udev->speed != USB_SPEED_SUPER)
3696 return 0;
3697
3698 max_burst = urb->ep->ss_ep_comp.bMaxBurst;
3699 return roundup(total_packet_count, max_burst + 1) - 1;
3700}
3701
3702/*
3703 * Returns the number of packets in the last "burst" of packets. This field is
3704 * valid for all speeds of devices. USB 2.0 devices can only do one "burst", so
3705 * the last burst packet count is equal to the total number of packets in the
3706 * TD. SuperSpeed endpoints can have up to 3 bursts. All but the last burst
3707 * must contain (bMaxBurst + 1) number of packets, but the last burst can
3708 * contain 1 to (bMaxBurst + 1) packets.
3709 */
3710static unsigned int xhci_get_last_burst_packet_count(struct xhci_hcd *xhci,
3711 struct usb_device *udev,
3712 struct urb *urb, unsigned int total_packet_count)
3713{
3714 unsigned int max_burst;
3715 unsigned int residue;
3716
3717 if (xhci->hci_version < 0x100)
3718 return 0;
3719
3720 switch (udev->speed) {
3721 case USB_SPEED_SUPER:
3722 /* bMaxBurst is zero based: 0 means 1 packet per burst */
3723 max_burst = urb->ep->ss_ep_comp.bMaxBurst;
3724 residue = total_packet_count % (max_burst + 1);
3725 /* If residue is zero, the last burst contains (max_burst + 1)
3726 * number of packets, but the TLBPC field is zero-based.
3727 */
3728 if (residue == 0)
3729 return max_burst;
3730 return residue - 1;
3731 default:
3732 if (total_packet_count == 0)
3733 return 0;
3734 return total_packet_count - 1;
3735 }
3736}
3737
3738/* This is for isoc transfer */
3739static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3740 struct urb *urb, int slot_id, unsigned int ep_index)
3741{
3742 struct xhci_ring *ep_ring;
3743 struct urb_priv *urb_priv;
3744 struct xhci_td *td;
3745 int num_tds, trbs_per_td;
3746 struct xhci_generic_trb *start_trb;
3747 bool first_trb;
3748 int start_cycle;
3749 u32 field, length_field;
3750 int running_total, trb_buff_len, td_len, td_remain_len, ret;
3751 u64 start_addr, addr;
3752 int i, j;
3753 bool more_trbs_coming;
3754
3755 ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
3756
3757 num_tds = urb->number_of_packets;
3758 if (num_tds < 1) {
3759 xhci_dbg(xhci, "Isoc URB with zero packets?\n");
3760 return -EINVAL;
3761 }
3762
3763 start_addr = (u64) urb->transfer_dma;
3764 start_trb = &ep_ring->enqueue->generic;
3765 start_cycle = ep_ring->cycle_state;
3766
3767 urb_priv = urb->hcpriv;
3768 /* Queue the first TRB, even if it's zero-length */
3769 for (i = 0; i < num_tds; i++) {
3770 unsigned int total_packet_count;
3771 unsigned int burst_count;
3772 unsigned int residue;
3773
3774 first_trb = true;
3775 running_total = 0;
3776 addr = start_addr + urb->iso_frame_desc[i].offset;
3777 td_len = urb->iso_frame_desc[i].length;
3778 td_remain_len = td_len;
3779 total_packet_count = DIV_ROUND_UP(td_len,
3780 GET_MAX_PACKET(
3781 usb_endpoint_maxp(&urb->ep->desc)));
3782 /* A zero-length transfer still involves at least one packet. */
3783 if (total_packet_count == 0)
3784 total_packet_count++;
3785 burst_count = xhci_get_burst_count(xhci, urb->dev, urb,
3786 total_packet_count);
3787 residue = xhci_get_last_burst_packet_count(xhci,
3788 urb->dev, urb, total_packet_count);
3789
3790 trbs_per_td = count_isoc_trbs_needed(xhci, urb, i);
3791
3792 ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
3793 urb->stream_id, trbs_per_td, urb, i, mem_flags);
3794 if (ret < 0) {
3795 if (i == 0)
3796 return ret;
3797 goto cleanup;
3798 }
3799
3800 td = urb_priv->td[i];
3801 for (j = 0; j < trbs_per_td; j++) {
3802 u32 remainder = 0;
3803 field = 0;
3804
3805 if (first_trb) {
3806 field = TRB_TBC(burst_count) |
3807 TRB_TLBPC(residue);
3808 /* Queue the isoc TRB */
3809 field |= TRB_TYPE(TRB_ISOC);
3810 /* Assume URB_ISO_ASAP is set */
3811 field |= TRB_SIA;
3812 if (i == 0) {
3813 if (start_cycle == 0)
3814 field |= 0x1;
3815 } else
3816 field |= ep_ring->cycle_state;
3817 first_trb = false;
3818 } else {
3819 /* Queue other normal TRBs */
3820 field |= TRB_TYPE(TRB_NORMAL);
3821 field |= ep_ring->cycle_state;
3822 }
3823
3824 /* Only set interrupt on short packet for IN EPs */
3825 if (usb_urb_dir_in(urb))
3826 field |= TRB_ISP;
3827
3828 /* Chain all the TRBs together; clear the chain bit in
3829 * the last TRB to indicate it's the last TRB in the
3830 * chain.
3831 */
3832 if (j < trbs_per_td - 1) {
3833 field |= TRB_CHAIN;
3834 more_trbs_coming = true;
3835 } else {
3836 td->last_trb = ep_ring->enqueue;
3837 field |= TRB_IOC;
3838 if (xhci->hci_version == 0x100 &&
3839 !(xhci->quirks &
3840 XHCI_AVOID_BEI)) {
3841 /* Set BEI bit except for the last td */
3842 if (i < num_tds - 1)
3843 field |= TRB_BEI;
3844 }
3845 more_trbs_coming = false;
3846 }
3847
3848 /* Calculate TRB length */
3849 trb_buff_len = TRB_MAX_BUFF_SIZE -
3850 (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
3851 if (trb_buff_len > td_remain_len)
3852 trb_buff_len = td_remain_len;
3853
3854 /* Set the TRB length, TD size, & interrupter fields. */
3855 if (xhci->hci_version < 0x100) {
3856 remainder = xhci_td_remainder(
3857 td_len - running_total);
3858 } else {
3859 remainder = xhci_v1_0_td_remainder(
3860 running_total, trb_buff_len,
3861 total_packet_count, urb,
3862 (trbs_per_td - j - 1));
3863 }
3864 length_field = TRB_LEN(trb_buff_len) |
3865 remainder |
3866 TRB_INTR_TARGET(0);
3867
3868 queue_trb(xhci, ep_ring, more_trbs_coming,
3869 lower_32_bits(addr),
3870 upper_32_bits(addr),
3871 length_field,
3872 field);
3873 running_total += trb_buff_len;
3874
3875 addr += trb_buff_len;
3876 td_remain_len -= trb_buff_len;
3877 }
3878
3879 /* Check TD length */
3880 if (running_total != td_len) {
3881 xhci_err(xhci, "ISOC TD length unmatch\n");
3882 ret = -EINVAL;
3883 goto cleanup;
3884 }
3885 }
3886
3887 if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
3888 if (xhci->quirks & XHCI_AMD_PLL_FIX)
3889 usb_amd_quirk_pll_disable();
3890 }
3891 xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++;
3892
3893 giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
3894 start_cycle, start_trb);
3895 return 0;
3896cleanup:
3897 /* Clean up a partially enqueued isoc transfer. */
3898
3899 for (i--; i >= 0; i--)
3900 list_del_init(&urb_priv->td[i]->td_list);
3901
3902 /* Use the first TD as a temporary variable to turn the TDs we've queued
3903 * into No-ops with a software-owned cycle bit. That way the hardware
3904 * won't accidentally start executing bogus TDs when we partially
3905 * overwrite them. td->first_trb and td->start_seg are already set.
3906 */
3907 urb_priv->td[0]->last_trb = ep_ring->enqueue;
3908 /* Every TRB except the first & last will have its cycle bit flipped. */
3909 td_to_noop(xhci, ep_ring, urb_priv->td[0], true);
3910
3911 /* Reset the ring enqueue back to the first TRB and its cycle bit. */
3912 ep_ring->enqueue = urb_priv->td[0]->first_trb;
3913 ep_ring->enq_seg = urb_priv->td[0]->start_seg;
3914 ep_ring->cycle_state = start_cycle;
3915 ep_ring->num_trbs_free = ep_ring->num_trbs_free_temp;
3916 usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
3917 return ret;
3918}
3919
3920/*
3921 * Check transfer ring to guarantee there is enough room for the urb.
3922 * Update ISO URB start_frame and interval.
3923 * Update interval as xhci_queue_intr_tx does. Just use xhci frame_index to
3924 * update the urb->start_frame by now.
3925 * Always assume URB_ISO_ASAP set, and NEVER use urb->start_frame as input.
3926 */
3927int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
3928 struct urb *urb, int slot_id, unsigned int ep_index)
3929{
3930 struct xhci_virt_device *xdev;
3931 struct xhci_ring *ep_ring;
3932 struct xhci_ep_ctx *ep_ctx;
3933 int start_frame;
3934 int xhci_interval;
3935 int ep_interval;
3936 int num_tds, num_trbs, i;
3937 int ret;
3938
3939 xdev = xhci->devs[slot_id];
3940 ep_ring = xdev->eps[ep_index].ring;
3941 ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
3942
3943 num_trbs = 0;
3944 num_tds = urb->number_of_packets;
3945 for (i = 0; i < num_tds; i++)
3946 num_trbs += count_isoc_trbs_needed(xhci, urb, i);
3947
3948 /* Check the ring to guarantee there is enough room for the whole urb.
3949 * Do not insert any td of the urb to the ring if the check failed.
3950 */
3951 ret = prepare_ring(xhci, ep_ring, le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK,
3952 num_trbs, mem_flags);
3953 if (ret)
3954 return ret;
3955
3956 start_frame = readl(&xhci->run_regs->microframe_index);
3957 start_frame &= 0x3fff;
3958
3959 urb->start_frame = start_frame;
3960 if (urb->dev->speed == USB_SPEED_LOW ||
3961 urb->dev->speed == USB_SPEED_FULL)
3962 urb->start_frame >>= 3;
3963
3964 xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info));
3965 ep_interval = urb->interval;
3966 /* Convert to microframes */
3967 if (urb->dev->speed == USB_SPEED_LOW ||
3968 urb->dev->speed == USB_SPEED_FULL)
3969 ep_interval *= 8;
3970 /* FIXME change this to a warning and a suggestion to use the new API
3971 * to set the polling interval (once the API is added).
3972 */
3973 if (xhci_interval != ep_interval) {
3974 dev_dbg_ratelimited(&urb->dev->dev,
3975 "Driver uses different interval (%d microframe%s) than xHCI (%d microframe%s)\n",
3976 ep_interval, ep_interval == 1 ? "" : "s",
3977 xhci_interval, xhci_interval == 1 ? "" : "s");
3978 urb->interval = xhci_interval;
3979 /* Convert back to frames for LS/FS devices */
3980 if (urb->dev->speed == USB_SPEED_LOW ||
3981 urb->dev->speed == USB_SPEED_FULL)
3982 urb->interval /= 8;
3983 }
3984 ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free;
3985
3986 return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
3987}
3988
3989/**** Command Ring Operations ****/
3990
3991/* Generic function for queueing a command TRB on the command ring.
3992 * Check to make sure there's room on the command ring for one command TRB.
3993 * Also check that there's room reserved for commands that must not fail.
3994 * If this is a command that must not fail, meaning command_must_succeed = TRUE,
3995 * then only check for the number of reserved spots.
3996 * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB
3997 * because the command event handler may want to resubmit a failed command.
3998 */
3999static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
4000 u32 field3, u32 field4, bool command_must_succeed)
4001{
4002 int reserved_trbs = xhci->cmd_ring_reserved_trbs;
4003 int ret;
4004
4005 if (!command_must_succeed)
4006 reserved_trbs++;
4007
4008 ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
4009 reserved_trbs, GFP_ATOMIC);
4010 if (ret < 0) {
4011 xhci_err(xhci, "ERR: No room for command on command ring\n");
4012 if (command_must_succeed)
4013 xhci_err(xhci, "ERR: Reserved TRB counting for "
4014 "unfailable commands failed.\n");
4015 return ret;
4016 }
4017 queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
4018 field4 | xhci->cmd_ring->cycle_state);
4019 return 0;
4020}
4021
4022/* Queue a slot enable or disable request on the command ring */
4023int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
4024{
4025 return queue_command(xhci, 0, 0, 0,
4026 TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false);
4027}
4028
4029/* Queue an address device command TRB */
4030int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
4031 u32 slot_id, enum xhci_setup_dev setup)
4032{
4033 return queue_command(xhci, lower_32_bits(in_ctx_ptr),
4034 upper_32_bits(in_ctx_ptr), 0,
4035 TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id)
4036 | (setup == SETUP_CONTEXT_ONLY ? TRB_BSR : 0), false);
4037}
4038
4039int xhci_queue_vendor_command(struct xhci_hcd *xhci,
4040 u32 field1, u32 field2, u32 field3, u32 field4)
4041{
4042 return queue_command(xhci, field1, field2, field3, field4, false);
4043}
4044
4045/* Queue a reset device command TRB */
4046int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id)
4047{
4048 return queue_command(xhci, 0, 0, 0,
4049 TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id),
4050 false);
4051}
4052
4053/* Queue a configure endpoint command TRB */
4054int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
4055 u32 slot_id, bool command_must_succeed)
4056{
4057 return queue_command(xhci, lower_32_bits(in_ctx_ptr),
4058 upper_32_bits(in_ctx_ptr), 0,
4059 TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id),
4060 command_must_succeed);
4061}
4062
4063/* Queue an evaluate context command TRB */
4064int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
4065 u32 slot_id, bool command_must_succeed)
4066{
4067 return queue_command(xhci, lower_32_bits(in_ctx_ptr),
4068 upper_32_bits(in_ctx_ptr), 0,
4069 TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id),
4070 command_must_succeed);
4071}
4072
4073/*
4074 * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop
4075 * activity on an endpoint that is about to be suspended.
4076 */
4077int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
4078 unsigned int ep_index, int suspend)
4079{
4080 u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
4081 u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
4082 u32 type = TRB_TYPE(TRB_STOP_RING);
4083 u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend);
4084
4085 return queue_command(xhci, 0, 0, 0,
4086 trb_slot_id | trb_ep_index | type | trb_suspend, false);
4087}
4088
4089/* Set Transfer Ring Dequeue Pointer command.
4090 * This should not be used for endpoints that have streams enabled.
4091 */
4092static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
4093 unsigned int ep_index, unsigned int stream_id,
4094 struct xhci_segment *deq_seg,
4095 union xhci_trb *deq_ptr, u32 cycle_state)
4096{
4097 dma_addr_t addr;
4098 u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
4099 u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
4100 u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id);
4101 u32 trb_sct = 0;
4102 u32 type = TRB_TYPE(TRB_SET_DEQ);
4103 struct xhci_virt_ep *ep;
4104
4105 addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
4106 if (addr == 0) {
4107 xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
4108 xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
4109 deq_seg, deq_ptr);
4110 return 0;
4111 }
4112 ep = &xhci->devs[slot_id]->eps[ep_index];
4113 if ((ep->ep_state & SET_DEQ_PENDING)) {
4114 xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
4115 xhci_warn(xhci, "A Set TR Deq Ptr command is pending.\n");
4116 return 0;
4117 }
4118 ep->queued_deq_seg = deq_seg;
4119 ep->queued_deq_ptr = deq_ptr;
4120 if (stream_id)
4121 trb_sct = SCT_FOR_TRB(SCT_PRI_TR);
4122 return queue_command(xhci, lower_32_bits(addr) | trb_sct | cycle_state,
4123 upper_32_bits(addr), trb_stream_id,
4124 trb_slot_id | trb_ep_index | type, false);
4125}
4126
4127int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
4128 unsigned int ep_index)
4129{
4130 u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
4131 u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
4132 u32 type = TRB_TYPE(TRB_RESET_EP);
4133
4134 return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type,
4135 false);
4136}
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * xHCI host controller driver
4 *
5 * Copyright (C) 2008 Intel Corp.
6 *
7 * Author: Sarah Sharp
8 * Some code borrowed from the Linux EHCI driver.
9 */
10
11/*
12 * Ring initialization rules:
13 * 1. Each segment is initialized to zero, except for link TRBs.
14 * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or
15 * Consumer Cycle State (CCS), depending on ring function.
16 * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
17 *
18 * Ring behavior rules:
19 * 1. A ring is empty if enqueue == dequeue. This means there will always be at
20 * least one free TRB in the ring. This is useful if you want to turn that
21 * into a link TRB and expand the ring.
22 * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
23 * link TRB, then load the pointer with the address in the link TRB. If the
24 * link TRB had its toggle bit set, you may need to update the ring cycle
25 * state (see cycle bit rules). You may have to do this multiple times
26 * until you reach a non-link TRB.
27 * 3. A ring is full if enqueue++ (for the definition of increment above)
28 * equals the dequeue pointer.
29 *
30 * Cycle bit rules:
31 * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
32 * in a link TRB, it must toggle the ring cycle state.
33 * 2. When a producer increments an enqueue pointer and encounters a toggle bit
34 * in a link TRB, it must toggle the ring cycle state.
35 *
36 * Producer rules:
37 * 1. Check if ring is full before you enqueue.
38 * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
39 * Update enqueue pointer between each write (which may update the ring
40 * cycle state).
41 * 3. Notify consumer. If SW is producer, it rings the doorbell for command
42 * and endpoint rings. If HC is the producer for the event ring,
43 * and it generates an interrupt according to interrupt modulation rules.
44 *
45 * Consumer rules:
46 * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state,
47 * the TRB is owned by the consumer.
48 * 2. Update dequeue pointer (which may update the ring cycle state) and
49 * continue processing TRBs until you reach a TRB which is not owned by you.
50 * 3. Notify the producer. SW is the consumer for the event ring, and it
51 * updates event ring dequeue pointer. HC is the consumer for the command and
52 * endpoint rings; it generates events on the event ring for these.
53 */
54
55#include <linux/jiffies.h>
56#include <linux/scatterlist.h>
57#include <linux/slab.h>
58#include <linux/dma-mapping.h>
59#include "xhci.h"
60#include "xhci-trace.h"
61
62static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
63 u32 field1, u32 field2,
64 u32 field3, u32 field4, bool command_must_succeed);
65
66/*
67 * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
68 * address of the TRB.
69 */
70dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
71 union xhci_trb *trb)
72{
73 unsigned long segment_offset;
74
75 if (!seg || !trb || trb < seg->trbs)
76 return 0;
77 /* offset in TRBs */
78 segment_offset = trb - seg->trbs;
79 if (segment_offset >= TRBS_PER_SEGMENT)
80 return 0;
81 return seg->dma + (segment_offset * sizeof(*trb));
82}
83
84static bool trb_is_noop(union xhci_trb *trb)
85{
86 return TRB_TYPE_NOOP_LE32(trb->generic.field[3]);
87}
88
89static bool trb_is_link(union xhci_trb *trb)
90{
91 return TRB_TYPE_LINK_LE32(trb->link.control);
92}
93
94static bool last_trb_on_seg(struct xhci_segment *seg, union xhci_trb *trb)
95{
96 return trb == &seg->trbs[TRBS_PER_SEGMENT - 1];
97}
98
99static bool last_trb_on_ring(struct xhci_ring *ring,
100 struct xhci_segment *seg, union xhci_trb *trb)
101{
102 return last_trb_on_seg(seg, trb) && (seg->next == ring->first_seg);
103}
104
105static bool link_trb_toggles_cycle(union xhci_trb *trb)
106{
107 return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
108}
109
110static bool last_td_in_urb(struct xhci_td *td)
111{
112 struct urb_priv *urb_priv = td->urb->hcpriv;
113
114 return urb_priv->num_tds_done == urb_priv->num_tds;
115}
116
117static bool unhandled_event_trb(struct xhci_ring *ring)
118{
119 return ((le32_to_cpu(ring->dequeue->event_cmd.flags) & TRB_CYCLE) ==
120 ring->cycle_state);
121}
122
123static void inc_td_cnt(struct urb *urb)
124{
125 struct urb_priv *urb_priv = urb->hcpriv;
126
127 urb_priv->num_tds_done++;
128}
129
130static void trb_to_noop(union xhci_trb *trb, u32 noop_type)
131{
132 if (trb_is_link(trb)) {
133 /* unchain chained link TRBs */
134 trb->link.control &= cpu_to_le32(~TRB_CHAIN);
135 } else {
136 trb->generic.field[0] = 0;
137 trb->generic.field[1] = 0;
138 trb->generic.field[2] = 0;
139 /* Preserve only the cycle bit of this TRB */
140 trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE);
141 trb->generic.field[3] |= cpu_to_le32(TRB_TYPE(noop_type));
142 }
143}
144
145/* Updates trb to point to the next TRB in the ring, and updates seg if the next
146 * TRB is in a new segment. This does not skip over link TRBs, and it does not
147 * effect the ring dequeue or enqueue pointers.
148 */
149static void next_trb(struct xhci_segment **seg,
150 union xhci_trb **trb)
151{
152 if (trb_is_link(*trb) || last_trb_on_seg(*seg, *trb)) {
153 *seg = (*seg)->next;
154 *trb = ((*seg)->trbs);
155 } else {
156 (*trb)++;
157 }
158}
159
160/*
161 * See Cycle bit rules. SW is the consumer for the event ring only.
162 */
163void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring)
164{
165 unsigned int link_trb_count = 0;
166
167 /* event ring doesn't have link trbs, check for last trb */
168 if (ring->type == TYPE_EVENT) {
169 if (!last_trb_on_seg(ring->deq_seg, ring->dequeue)) {
170 ring->dequeue++;
171 return;
172 }
173 if (last_trb_on_ring(ring, ring->deq_seg, ring->dequeue))
174 ring->cycle_state ^= 1;
175 ring->deq_seg = ring->deq_seg->next;
176 ring->dequeue = ring->deq_seg->trbs;
177
178 trace_xhci_inc_deq(ring);
179
180 return;
181 }
182
183 /* All other rings have link trbs */
184 if (!trb_is_link(ring->dequeue)) {
185 if (last_trb_on_seg(ring->deq_seg, ring->dequeue))
186 xhci_warn(xhci, "Missing link TRB at end of segment\n");
187 else
188 ring->dequeue++;
189 }
190
191 while (trb_is_link(ring->dequeue)) {
192 ring->deq_seg = ring->deq_seg->next;
193 ring->dequeue = ring->deq_seg->trbs;
194
195 trace_xhci_inc_deq(ring);
196
197 if (link_trb_count++ > ring->num_segs) {
198 xhci_warn(xhci, "Ring is an endless link TRB loop\n");
199 break;
200 }
201 }
202 return;
203}
204
205/*
206 * See Cycle bit rules. SW is the consumer for the event ring only.
207 *
208 * If we've just enqueued a TRB that is in the middle of a TD (meaning the
209 * chain bit is set), then set the chain bit in all the following link TRBs.
210 * If we've enqueued the last TRB in a TD, make sure the following link TRBs
211 * have their chain bit cleared (so that each Link TRB is a separate TD).
212 *
213 * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
214 * set, but other sections talk about dealing with the chain bit set. This was
215 * fixed in the 0.96 specification errata, but we have to assume that all 0.95
216 * xHCI hardware can't handle the chain bit being cleared on a link TRB.
217 *
218 * @more_trbs_coming: Will you enqueue more TRBs before calling
219 * prepare_transfer()?
220 */
221static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
222 bool more_trbs_coming)
223{
224 u32 chain;
225 union xhci_trb *next;
226 unsigned int link_trb_count = 0;
227
228 chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
229
230 if (last_trb_on_seg(ring->enq_seg, ring->enqueue)) {
231 xhci_err(xhci, "Tried to move enqueue past ring segment\n");
232 return;
233 }
234
235 next = ++(ring->enqueue);
236
237 /* Update the dequeue pointer further if that was a link TRB */
238 while (trb_is_link(next)) {
239
240 /*
241 * If the caller doesn't plan on enqueueing more TDs before
242 * ringing the doorbell, then we don't want to give the link TRB
243 * to the hardware just yet. We'll give the link TRB back in
244 * prepare_ring() just before we enqueue the TD at the top of
245 * the ring.
246 */
247 if (!chain && !more_trbs_coming)
248 break;
249
250 /* If we're not dealing with 0.95 hardware or isoc rings on
251 * AMD 0.96 host, carry over the chain bit of the previous TRB
252 * (which may mean the chain bit is cleared).
253 */
254 if (!xhci_link_chain_quirk(xhci, ring->type)) {
255 next->link.control &= cpu_to_le32(~TRB_CHAIN);
256 next->link.control |= cpu_to_le32(chain);
257 }
258 /* Give this link TRB to the hardware */
259 wmb();
260 next->link.control ^= cpu_to_le32(TRB_CYCLE);
261
262 /* Toggle the cycle bit after the last ring segment. */
263 if (link_trb_toggles_cycle(next))
264 ring->cycle_state ^= 1;
265
266 ring->enq_seg = ring->enq_seg->next;
267 ring->enqueue = ring->enq_seg->trbs;
268 next = ring->enqueue;
269
270 trace_xhci_inc_enq(ring);
271
272 if (link_trb_count++ > ring->num_segs) {
273 xhci_warn(xhci, "%s: Ring link TRB loop\n", __func__);
274 break;
275 }
276 }
277}
278
279/*
280 * Return number of free normal TRBs from enqueue to dequeue pointer on ring.
281 * Not counting an assumed link TRB at end of each TRBS_PER_SEGMENT sized segment.
282 * Only for transfer and command rings where driver is the producer, not for
283 * event rings.
284 */
285static unsigned int xhci_num_trbs_free(struct xhci_ring *ring)
286{
287 struct xhci_segment *enq_seg = ring->enq_seg;
288 union xhci_trb *enq = ring->enqueue;
289 union xhci_trb *last_on_seg;
290 unsigned int free = 0;
291 int i = 0;
292
293 /* Ring might be empty even if enq != deq if enq is left on a link trb */
294 if (trb_is_link(enq)) {
295 enq_seg = enq_seg->next;
296 enq = enq_seg->trbs;
297 }
298
299 /* Empty ring, common case, don't walk the segments */
300 if (enq == ring->dequeue)
301 return ring->num_segs * (TRBS_PER_SEGMENT - 1);
302
303 do {
304 if (ring->deq_seg == enq_seg && ring->dequeue >= enq)
305 return free + (ring->dequeue - enq);
306 last_on_seg = &enq_seg->trbs[TRBS_PER_SEGMENT - 1];
307 free += last_on_seg - enq;
308 enq_seg = enq_seg->next;
309 enq = enq_seg->trbs;
310 } while (i++ < ring->num_segs);
311
312 return free;
313}
314
315/*
316 * Check to see if there's room to enqueue num_trbs on the ring and make sure
317 * enqueue pointer will not advance into dequeue segment. See rules above.
318 * return number of new segments needed to ensure this.
319 */
320
321static unsigned int xhci_ring_expansion_needed(struct xhci_hcd *xhci, struct xhci_ring *ring,
322 unsigned int num_trbs)
323{
324 struct xhci_segment *seg;
325 int trbs_past_seg;
326 int enq_used;
327 int new_segs;
328
329 enq_used = ring->enqueue - ring->enq_seg->trbs;
330
331 /* how many trbs will be queued past the enqueue segment? */
332 trbs_past_seg = enq_used + num_trbs - (TRBS_PER_SEGMENT - 1);
333
334 /*
335 * Consider expanding the ring already if num_trbs fills the current
336 * segment (i.e. trbs_past_seg == 0), not only when num_trbs goes into
337 * the next segment. Avoids confusing full ring with special empty ring
338 * case below
339 */
340 if (trbs_past_seg < 0)
341 return 0;
342
343 /* Empty ring special case, enqueue stuck on link trb while dequeue advanced */
344 if (trb_is_link(ring->enqueue) && ring->enq_seg->next->trbs == ring->dequeue)
345 return 0;
346
347 new_segs = 1 + (trbs_past_seg / (TRBS_PER_SEGMENT - 1));
348 seg = ring->enq_seg;
349
350 while (new_segs > 0) {
351 seg = seg->next;
352 if (seg == ring->deq_seg) {
353 xhci_dbg(xhci, "Adding %d trbs requires expanding ring by %d segments\n",
354 num_trbs, new_segs);
355 return new_segs;
356 }
357 new_segs--;
358 }
359
360 return 0;
361}
362
363/* Ring the host controller doorbell after placing a command on the ring */
364void xhci_ring_cmd_db(struct xhci_hcd *xhci)
365{
366 if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING))
367 return;
368
369 xhci_dbg(xhci, "// Ding dong!\n");
370
371 trace_xhci_ring_host_doorbell(0, DB_VALUE_HOST);
372
373 writel(DB_VALUE_HOST, &xhci->dba->doorbell[0]);
374 /* Flush PCI posted writes */
375 readl(&xhci->dba->doorbell[0]);
376}
377
378static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci)
379{
380 return mod_delayed_work(system_wq, &xhci->cmd_timer,
381 msecs_to_jiffies(xhci->current_cmd->timeout_ms));
382}
383
384static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci)
385{
386 return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command,
387 cmd_list);
388}
389
390/*
391 * Turn all commands on command ring with status set to "aborted" to no-op trbs.
392 * If there are other commands waiting then restart the ring and kick the timer.
393 * This must be called with command ring stopped and xhci->lock held.
394 */
395static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
396 struct xhci_command *cur_cmd)
397{
398 struct xhci_command *i_cmd;
399
400 /* Turn all aborted commands in list to no-ops, then restart */
401 list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) {
402
403 if (i_cmd->status != COMP_COMMAND_ABORTED)
404 continue;
405
406 i_cmd->status = COMP_COMMAND_RING_STOPPED;
407
408 xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
409 i_cmd->command_trb);
410
411 trb_to_noop(i_cmd->command_trb, TRB_CMD_NOOP);
412
413 /*
414 * caller waiting for completion is called when command
415 * completion event is received for these no-op commands
416 */
417 }
418
419 xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
420
421 /* ring command ring doorbell to restart the command ring */
422 if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
423 !(xhci->xhc_state & XHCI_STATE_DYING)) {
424 xhci->current_cmd = cur_cmd;
425 if (cur_cmd)
426 xhci_mod_cmd_timer(xhci);
427 xhci_ring_cmd_db(xhci);
428 }
429}
430
431/* Must be called with xhci->lock held, releases and acquires lock back */
432static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
433{
434 struct xhci_segment *new_seg = xhci->cmd_ring->deq_seg;
435 union xhci_trb *new_deq = xhci->cmd_ring->dequeue;
436 u64 crcr;
437 int ret;
438
439 xhci_dbg(xhci, "Abort command ring\n");
440
441 reinit_completion(&xhci->cmd_ring_stop_completion);
442
443 /*
444 * The control bits like command stop, abort are located in lower
445 * dword of the command ring control register.
446 * Some controllers require all 64 bits to be written to abort the ring.
447 * Make sure the upper dword is valid, pointing to the next command,
448 * avoiding corrupting the command ring pointer in case the command ring
449 * is stopped by the time the upper dword is written.
450 */
451 next_trb(&new_seg, &new_deq);
452 if (trb_is_link(new_deq))
453 next_trb(&new_seg, &new_deq);
454
455 crcr = xhci_trb_virt_to_dma(new_seg, new_deq);
456 xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
457
458 /* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
459 * completion of the Command Abort operation. If CRR is not negated in 5
460 * seconds then driver handles it as if host died (-ENODEV).
461 * In the future we should distinguish between -ENODEV and -ETIMEDOUT
462 * and try to recover a -ETIMEDOUT with a host controller reset.
463 */
464 ret = xhci_handshake_check_state(xhci, &xhci->op_regs->cmd_ring,
465 CMD_RING_RUNNING, 0, 5 * 1000 * 1000,
466 XHCI_STATE_REMOVING);
467 if (ret < 0) {
468 xhci_err(xhci, "Abort failed to stop command ring: %d\n", ret);
469 xhci_halt(xhci);
470 xhci_hc_died(xhci);
471 return ret;
472 }
473 /*
474 * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
475 * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
476 * but the completion event in never sent. Wait 2 secs (arbitrary
477 * number) to handle those cases after negation of CMD_RING_RUNNING.
478 */
479 spin_unlock_irqrestore(&xhci->lock, flags);
480 ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion,
481 msecs_to_jiffies(2000));
482 spin_lock_irqsave(&xhci->lock, flags);
483 if (!ret) {
484 xhci_dbg(xhci, "No stop event for abort, ring start fail?\n");
485 xhci_cleanup_command_queue(xhci);
486 } else {
487 xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci));
488 }
489 return 0;
490}
491
492void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
493 unsigned int slot_id,
494 unsigned int ep_index,
495 unsigned int stream_id)
496{
497 __le32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
498 struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
499 unsigned int ep_state = ep->ep_state;
500
501 /* Don't ring the doorbell for this endpoint if there are pending
502 * cancellations because we don't want to interrupt processing.
503 * We don't want to restart any stream rings if there's a set dequeue
504 * pointer command pending because the device can choose to start any
505 * stream once the endpoint is on the HW schedule.
506 */
507 if ((ep_state & EP_STOP_CMD_PENDING) || (ep_state & SET_DEQ_PENDING) ||
508 (ep_state & EP_HALTED) || (ep_state & EP_CLEARING_TT))
509 return;
510
511 trace_xhci_ring_ep_doorbell(slot_id, DB_VALUE(ep_index, stream_id));
512
513 writel(DB_VALUE(ep_index, stream_id), db_addr);
514 /* flush the write */
515 readl(db_addr);
516}
517
518/* Ring the doorbell for any rings with pending URBs */
519static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
520 unsigned int slot_id,
521 unsigned int ep_index)
522{
523 unsigned int stream_id;
524 struct xhci_virt_ep *ep;
525
526 ep = &xhci->devs[slot_id]->eps[ep_index];
527
528 /* A ring has pending URBs if its TD list is not empty */
529 if (!(ep->ep_state & EP_HAS_STREAMS)) {
530 if (ep->ring && !(list_empty(&ep->ring->td_list)))
531 xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0);
532 return;
533 }
534
535 for (stream_id = 1; stream_id < ep->stream_info->num_streams;
536 stream_id++) {
537 struct xhci_stream_info *stream_info = ep->stream_info;
538 if (!list_empty(&stream_info->stream_rings[stream_id]->td_list))
539 xhci_ring_ep_doorbell(xhci, slot_id, ep_index,
540 stream_id);
541 }
542}
543
544void xhci_ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
545 unsigned int slot_id,
546 unsigned int ep_index)
547{
548 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
549}
550
551static struct xhci_virt_ep *xhci_get_virt_ep(struct xhci_hcd *xhci,
552 unsigned int slot_id,
553 unsigned int ep_index)
554{
555 if (slot_id == 0 || slot_id >= MAX_HC_SLOTS) {
556 xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
557 return NULL;
558 }
559 if (ep_index >= EP_CTX_PER_DEV) {
560 xhci_warn(xhci, "Invalid endpoint index %u\n", ep_index);
561 return NULL;
562 }
563 if (!xhci->devs[slot_id]) {
564 xhci_warn(xhci, "No xhci virt device for slot_id %u\n", slot_id);
565 return NULL;
566 }
567
568 return &xhci->devs[slot_id]->eps[ep_index];
569}
570
571static struct xhci_ring *xhci_virt_ep_to_ring(struct xhci_hcd *xhci,
572 struct xhci_virt_ep *ep,
573 unsigned int stream_id)
574{
575 /* common case, no streams */
576 if (!(ep->ep_state & EP_HAS_STREAMS))
577 return ep->ring;
578
579 if (!ep->stream_info)
580 return NULL;
581
582 if (stream_id == 0 || stream_id >= ep->stream_info->num_streams) {
583 xhci_warn(xhci, "Invalid stream_id %u request for slot_id %u ep_index %u\n",
584 stream_id, ep->vdev->slot_id, ep->ep_index);
585 return NULL;
586 }
587
588 return ep->stream_info->stream_rings[stream_id];
589}
590
591/* Get the right ring for the given slot_id, ep_index and stream_id.
592 * If the endpoint supports streams, boundary check the URB's stream ID.
593 * If the endpoint doesn't support streams, return the singular endpoint ring.
594 */
595struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
596 unsigned int slot_id, unsigned int ep_index,
597 unsigned int stream_id)
598{
599 struct xhci_virt_ep *ep;
600
601 ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
602 if (!ep)
603 return NULL;
604
605 return xhci_virt_ep_to_ring(xhci, ep, stream_id);
606}
607
608
609/*
610 * Get the hw dequeue pointer xHC stopped on, either directly from the
611 * endpoint context, or if streams are in use from the stream context.
612 * The returned hw_dequeue contains the lowest four bits with cycle state
613 * and possbile stream context type.
614 */
615static u64 xhci_get_hw_deq(struct xhci_hcd *xhci, struct xhci_virt_device *vdev,
616 unsigned int ep_index, unsigned int stream_id)
617{
618 struct xhci_ep_ctx *ep_ctx;
619 struct xhci_stream_ctx *st_ctx;
620 struct xhci_virt_ep *ep;
621
622 ep = &vdev->eps[ep_index];
623
624 if (ep->ep_state & EP_HAS_STREAMS) {
625 st_ctx = &ep->stream_info->stream_ctx_array[stream_id];
626 return le64_to_cpu(st_ctx->stream_ring);
627 }
628 ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
629 return le64_to_cpu(ep_ctx->deq);
630}
631
632static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci,
633 unsigned int slot_id, unsigned int ep_index,
634 unsigned int stream_id, struct xhci_td *td)
635{
636 struct xhci_virt_device *dev = xhci->devs[slot_id];
637 struct xhci_virt_ep *ep = &dev->eps[ep_index];
638 struct xhci_ring *ep_ring;
639 struct xhci_command *cmd;
640 struct xhci_segment *new_seg;
641 union xhci_trb *new_deq;
642 int new_cycle;
643 dma_addr_t addr;
644 u64 hw_dequeue;
645 bool cycle_found = false;
646 bool td_last_trb_found = false;
647 u32 trb_sct = 0;
648 int ret;
649
650 ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
651 ep_index, stream_id);
652 if (!ep_ring) {
653 xhci_warn(xhci, "WARN can't find new dequeue, invalid stream ID %u\n",
654 stream_id);
655 return -ENODEV;
656 }
657
658 hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id);
659 new_seg = ep_ring->deq_seg;
660 new_deq = ep_ring->dequeue;
661 new_cycle = hw_dequeue & 0x1;
662
663 /*
664 * We want to find the pointer, segment and cycle state of the new trb
665 * (the one after current TD's end_trb). We know the cycle state at
666 * hw_dequeue, so walk the ring until both hw_dequeue and end_trb are
667 * found.
668 */
669 do {
670 if (!cycle_found && xhci_trb_virt_to_dma(new_seg, new_deq)
671 == (dma_addr_t)(hw_dequeue & ~0xf)) {
672 cycle_found = true;
673 if (td_last_trb_found)
674 break;
675 }
676 if (new_deq == td->end_trb)
677 td_last_trb_found = true;
678
679 if (cycle_found && trb_is_link(new_deq) &&
680 link_trb_toggles_cycle(new_deq))
681 new_cycle ^= 0x1;
682
683 next_trb(&new_seg, &new_deq);
684
685 /* Search wrapped around, bail out */
686 if (new_deq == ep->ring->dequeue) {
687 xhci_err(xhci, "Error: Failed finding new dequeue state\n");
688 return -EINVAL;
689 }
690
691 } while (!cycle_found || !td_last_trb_found);
692
693 /* Don't update the ring cycle state for the producer (us). */
694 addr = xhci_trb_virt_to_dma(new_seg, new_deq);
695 if (addr == 0) {
696 xhci_warn(xhci, "Can't find dma of new dequeue ptr\n");
697 xhci_warn(xhci, "deq seg = %p, deq ptr = %p\n", new_seg, new_deq);
698 return -EINVAL;
699 }
700
701 if ((ep->ep_state & SET_DEQ_PENDING)) {
702 xhci_warn(xhci, "Set TR Deq already pending, don't submit for 0x%pad\n",
703 &addr);
704 return -EBUSY;
705 }
706
707 /* This function gets called from contexts where it cannot sleep */
708 cmd = xhci_alloc_command(xhci, false, GFP_ATOMIC);
709 if (!cmd) {
710 xhci_warn(xhci, "Can't alloc Set TR Deq cmd 0x%pad\n", &addr);
711 return -ENOMEM;
712 }
713
714 if (stream_id)
715 trb_sct = SCT_FOR_TRB(SCT_PRI_TR);
716 ret = queue_command(xhci, cmd,
717 lower_32_bits(addr) | trb_sct | new_cycle,
718 upper_32_bits(addr),
719 STREAM_ID_FOR_TRB(stream_id), SLOT_ID_FOR_TRB(slot_id) |
720 EP_INDEX_FOR_TRB(ep_index) | TRB_TYPE(TRB_SET_DEQ), false);
721 if (ret < 0) {
722 xhci_free_command(xhci, cmd);
723 return ret;
724 }
725 ep->queued_deq_seg = new_seg;
726 ep->queued_deq_ptr = new_deq;
727
728 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
729 "Set TR Deq ptr 0x%llx, cycle %u\n", addr, new_cycle);
730
731 /* Stop the TD queueing code from ringing the doorbell until
732 * this command completes. The HC won't set the dequeue pointer
733 * if the ring is running, and ringing the doorbell starts the
734 * ring running.
735 */
736 ep->ep_state |= SET_DEQ_PENDING;
737 xhci_ring_cmd_db(xhci);
738 return 0;
739}
740
741/* flip_cycle means flip the cycle bit of all but the first and last TRB.
742 * (The last TRB actually points to the ring enqueue pointer, which is not part
743 * of this TD.) This is used to remove partially enqueued isoc TDs from a ring.
744 */
745static void td_to_noop(struct xhci_td *td, bool flip_cycle)
746{
747 struct xhci_segment *seg = td->start_seg;
748 union xhci_trb *trb = td->start_trb;
749
750 while (1) {
751 trb_to_noop(trb, TRB_TR_NOOP);
752
753 /* flip cycle if asked to */
754 if (flip_cycle && trb != td->start_trb && trb != td->end_trb)
755 trb->generic.field[3] ^= cpu_to_le32(TRB_CYCLE);
756
757 if (trb == td->end_trb)
758 break;
759
760 next_trb(&seg, &trb);
761 }
762}
763
764static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
765 struct xhci_td *cur_td, int status)
766{
767 struct urb *urb = cur_td->urb;
768 struct urb_priv *urb_priv = urb->hcpriv;
769 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
770
771 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
772 xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
773 if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
774 if (xhci->quirks & XHCI_AMD_PLL_FIX)
775 usb_amd_quirk_pll_enable();
776 }
777 }
778 xhci_urb_free_priv(urb_priv);
779 usb_hcd_unlink_urb_from_ep(hcd, urb);
780 trace_xhci_urb_giveback(urb);
781 usb_hcd_giveback_urb(hcd, urb, status);
782}
783
784static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci,
785 struct xhci_ring *ring, struct xhci_td *td)
786{
787 struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
788 struct xhci_segment *seg = td->bounce_seg;
789 struct urb *urb = td->urb;
790 size_t len;
791
792 if (!ring || !seg || !urb)
793 return;
794
795 if (usb_urb_dir_out(urb)) {
796 dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
797 DMA_TO_DEVICE);
798 return;
799 }
800
801 dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
802 DMA_FROM_DEVICE);
803 /* for in transfers we need to copy the data from bounce to sg */
804 if (urb->num_sgs) {
805 len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf,
806 seg->bounce_len, seg->bounce_offs);
807 if (len != seg->bounce_len)
808 xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n",
809 len, seg->bounce_len);
810 } else {
811 memcpy(urb->transfer_buffer + seg->bounce_offs, seg->bounce_buf,
812 seg->bounce_len);
813 }
814 seg->bounce_len = 0;
815 seg->bounce_offs = 0;
816}
817
818static void xhci_td_cleanup(struct xhci_hcd *xhci, struct xhci_td *td,
819 struct xhci_ring *ep_ring, int status)
820{
821 struct urb *urb = NULL;
822
823 /* Clean up the endpoint's TD list */
824 urb = td->urb;
825
826 /* if a bounce buffer was used to align this td then unmap it */
827 xhci_unmap_td_bounce_buffer(xhci, ep_ring, td);
828
829 /* Do one last check of the actual transfer length.
830 * If the host controller said we transferred more data than the buffer
831 * length, urb->actual_length will be a very big number (since it's
832 * unsigned). Play it safe and say we didn't transfer anything.
833 */
834 if (urb->actual_length > urb->transfer_buffer_length) {
835 xhci_warn(xhci, "URB req %u and actual %u transfer length mismatch\n",
836 urb->transfer_buffer_length, urb->actual_length);
837 urb->actual_length = 0;
838 status = 0;
839 }
840 /* TD might be removed from td_list if we are giving back a cancelled URB */
841 if (!list_empty(&td->td_list))
842 list_del_init(&td->td_list);
843 /* Giving back a cancelled URB, or if a slated TD completed anyway */
844 if (!list_empty(&td->cancelled_td_list))
845 list_del_init(&td->cancelled_td_list);
846
847 inc_td_cnt(urb);
848 /* Giveback the urb when all the tds are completed */
849 if (last_td_in_urb(td)) {
850 if ((urb->actual_length != urb->transfer_buffer_length &&
851 (urb->transfer_flags & URB_SHORT_NOT_OK)) ||
852 (status != 0 && !usb_endpoint_xfer_isoc(&urb->ep->desc)))
853 xhci_dbg(xhci, "Giveback URB %p, len = %d, expected = %d, status = %d\n",
854 urb, urb->actual_length,
855 urb->transfer_buffer_length, status);
856
857 /* set isoc urb status to 0 just as EHCI, UHCI, and OHCI */
858 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
859 status = 0;
860 xhci_giveback_urb_in_irq(xhci, td, status);
861 }
862}
863
864/* Give back previous TD and move on to the next TD. */
865static void xhci_dequeue_td(struct xhci_hcd *xhci, struct xhci_td *td, struct xhci_ring *ring,
866 u32 status)
867{
868 ring->dequeue = td->end_trb;
869 ring->deq_seg = td->end_seg;
870 inc_deq(xhci, ring);
871
872 xhci_td_cleanup(xhci, td, ring, status);
873}
874
875/* Complete the cancelled URBs we unlinked from td_list. */
876static void xhci_giveback_invalidated_tds(struct xhci_virt_ep *ep)
877{
878 struct xhci_ring *ring;
879 struct xhci_td *td, *tmp_td;
880
881 list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list,
882 cancelled_td_list) {
883
884 ring = xhci_urb_to_transfer_ring(ep->xhci, td->urb);
885
886 if (td->cancel_status == TD_CLEARED) {
887 xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n",
888 __func__, td->urb);
889 xhci_td_cleanup(ep->xhci, td, ring, td->status);
890 } else {
891 xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n",
892 __func__, td->urb, td->cancel_status);
893 }
894 if (ep->xhci->xhc_state & XHCI_STATE_DYING)
895 return;
896 }
897}
898
899static int xhci_reset_halted_ep(struct xhci_hcd *xhci, unsigned int slot_id,
900 unsigned int ep_index, enum xhci_ep_reset_type reset_type)
901{
902 struct xhci_command *command;
903 int ret = 0;
904
905 command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
906 if (!command) {
907 ret = -ENOMEM;
908 goto done;
909 }
910
911 xhci_dbg(xhci, "%s-reset ep %u, slot %u\n",
912 (reset_type == EP_HARD_RESET) ? "Hard" : "Soft",
913 ep_index, slot_id);
914
915 ret = xhci_queue_reset_ep(xhci, command, slot_id, ep_index, reset_type);
916done:
917 if (ret)
918 xhci_err(xhci, "ERROR queuing reset endpoint for slot %d ep_index %d, %d\n",
919 slot_id, ep_index, ret);
920 return ret;
921}
922
923static int xhci_handle_halted_endpoint(struct xhci_hcd *xhci,
924 struct xhci_virt_ep *ep,
925 struct xhci_td *td,
926 enum xhci_ep_reset_type reset_type)
927{
928 unsigned int slot_id = ep->vdev->slot_id;
929 int err;
930
931 /*
932 * Avoid resetting endpoint if link is inactive. Can cause host hang.
933 * Device will be reset soon to recover the link so don't do anything
934 */
935 if (ep->vdev->flags & VDEV_PORT_ERROR)
936 return -ENODEV;
937
938 /* add td to cancelled list and let reset ep handler take care of it */
939 if (reset_type == EP_HARD_RESET) {
940 ep->ep_state |= EP_HARD_CLEAR_TOGGLE;
941 if (td && list_empty(&td->cancelled_td_list)) {
942 list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
943 td->cancel_status = TD_HALTED;
944 }
945 }
946
947 if (ep->ep_state & EP_HALTED) {
948 xhci_dbg(xhci, "Reset ep command for ep_index %d already pending\n",
949 ep->ep_index);
950 return 0;
951 }
952
953 err = xhci_reset_halted_ep(xhci, slot_id, ep->ep_index, reset_type);
954 if (err)
955 return err;
956
957 ep->ep_state |= EP_HALTED;
958
959 xhci_ring_cmd_db(xhci);
960
961 return 0;
962}
963
964/*
965 * Fix up the ep ring first, so HW stops executing cancelled TDs.
966 * We have the xHCI lock, so nothing can modify this list until we drop it.
967 * We're also in the event handler, so we can't get re-interrupted if another
968 * Stop Endpoint command completes.
969 *
970 * only call this when ring is not in a running state
971 */
972
973static int xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep)
974{
975 struct xhci_hcd *xhci;
976 struct xhci_td *td = NULL;
977 struct xhci_td *tmp_td = NULL;
978 struct xhci_td *cached_td = NULL;
979 struct xhci_ring *ring;
980 u64 hw_deq;
981 unsigned int slot_id = ep->vdev->slot_id;
982 int err;
983
984 /*
985 * This is not going to work if the hardware is changing its dequeue
986 * pointers as we look at them. Completion handler will call us later.
987 */
988 if (ep->ep_state & SET_DEQ_PENDING)
989 return 0;
990
991 xhci = ep->xhci;
992
993 list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list, cancelled_td_list) {
994 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
995 "Removing canceled TD starting at 0x%llx (dma) in stream %u URB %p",
996 (unsigned long long)xhci_trb_virt_to_dma(
997 td->start_seg, td->start_trb),
998 td->urb->stream_id, td->urb);
999 list_del_init(&td->td_list);
1000 ring = xhci_urb_to_transfer_ring(xhci, td->urb);
1001 if (!ring) {
1002 xhci_warn(xhci, "WARN Cancelled URB %p has invalid stream ID %u.\n",
1003 td->urb, td->urb->stream_id);
1004 continue;
1005 }
1006 /*
1007 * If a ring stopped on the TD we need to cancel then we have to
1008 * move the xHC endpoint ring dequeue pointer past this TD.
1009 * Rings halted due to STALL may show hw_deq is past the stalled
1010 * TD, but still require a set TR Deq command to flush xHC cache.
1011 */
1012 hw_deq = xhci_get_hw_deq(xhci, ep->vdev, ep->ep_index,
1013 td->urb->stream_id);
1014 hw_deq &= ~0xf;
1015
1016 if (td->cancel_status == TD_HALTED || trb_in_td(xhci, td, hw_deq, false)) {
1017 switch (td->cancel_status) {
1018 case TD_CLEARED: /* TD is already no-op */
1019 case TD_CLEARING_CACHE: /* set TR deq command already queued */
1020 break;
1021 case TD_DIRTY: /* TD is cached, clear it */
1022 case TD_HALTED:
1023 case TD_CLEARING_CACHE_DEFERRED:
1024 if (cached_td) {
1025 if (cached_td->urb->stream_id != td->urb->stream_id) {
1026 /* Multiple streams case, defer move dq */
1027 xhci_dbg(xhci,
1028 "Move dq deferred: stream %u URB %p\n",
1029 td->urb->stream_id, td->urb);
1030 td->cancel_status = TD_CLEARING_CACHE_DEFERRED;
1031 break;
1032 }
1033
1034 /* Should never happen, but clear the TD if it does */
1035 xhci_warn(xhci,
1036 "Found multiple active URBs %p and %p in stream %u?\n",
1037 td->urb, cached_td->urb,
1038 td->urb->stream_id);
1039 td_to_noop(cached_td, false);
1040 cached_td->cancel_status = TD_CLEARED;
1041 }
1042 td_to_noop(td, false);
1043 td->cancel_status = TD_CLEARING_CACHE;
1044 cached_td = td;
1045 break;
1046 }
1047 } else {
1048 td_to_noop(td, false);
1049 td->cancel_status = TD_CLEARED;
1050 }
1051 }
1052
1053 /* If there's no need to move the dequeue pointer then we're done */
1054 if (!cached_td)
1055 return 0;
1056
1057 err = xhci_move_dequeue_past_td(xhci, slot_id, ep->ep_index,
1058 cached_td->urb->stream_id,
1059 cached_td);
1060 if (err) {
1061 /* Failed to move past cached td, just set cached TDs to no-op */
1062 list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list, cancelled_td_list) {
1063 /*
1064 * Deferred TDs need to have the deq pointer set after the above command
1065 * completes, so if that failed we just give up on all of them (and
1066 * complain loudly since this could cause issues due to caching).
1067 */
1068 if (td->cancel_status != TD_CLEARING_CACHE &&
1069 td->cancel_status != TD_CLEARING_CACHE_DEFERRED)
1070 continue;
1071 xhci_warn(xhci, "Failed to clear cancelled cached URB %p, mark clear anyway\n",
1072 td->urb);
1073 td_to_noop(td, false);
1074 td->cancel_status = TD_CLEARED;
1075 }
1076 }
1077 return 0;
1078}
1079
1080/*
1081 * Erase queued TDs from transfer ring(s) and give back those the xHC didn't
1082 * stop on. If necessary, queue commands to move the xHC off cancelled TDs it
1083 * stopped on. Those will be given back later when the commands complete.
1084 *
1085 * Call under xhci->lock on a stopped endpoint.
1086 */
1087void xhci_process_cancelled_tds(struct xhci_virt_ep *ep)
1088{
1089 xhci_invalidate_cancelled_tds(ep);
1090 xhci_giveback_invalidated_tds(ep);
1091}
1092
1093/*
1094 * Returns the TD the endpoint ring halted on.
1095 * Only call for non-running rings without streams.
1096 */
1097static struct xhci_td *find_halted_td(struct xhci_virt_ep *ep)
1098{
1099 struct xhci_td *td;
1100 u64 hw_deq;
1101
1102 if (!list_empty(&ep->ring->td_list)) { /* Not streams compatible */
1103 hw_deq = xhci_get_hw_deq(ep->xhci, ep->vdev, ep->ep_index, 0);
1104 hw_deq &= ~0xf;
1105 td = list_first_entry(&ep->ring->td_list, struct xhci_td, td_list);
1106 if (trb_in_td(ep->xhci, td, hw_deq, false))
1107 return td;
1108 }
1109 return NULL;
1110}
1111
1112/*
1113 * When we get a command completion for a Stop Endpoint Command, we need to
1114 * unlink any cancelled TDs from the ring. There are two ways to do that:
1115 *
1116 * 1. If the HW was in the middle of processing the TD that needs to be
1117 * cancelled, then we must move the ring's dequeue pointer past the last TRB
1118 * in the TD with a Set Dequeue Pointer Command.
1119 * 2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
1120 * bit cleared) so that the HW will skip over them.
1121 */
1122static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
1123 union xhci_trb *trb, u32 comp_code)
1124{
1125 unsigned int ep_index;
1126 struct xhci_virt_ep *ep;
1127 struct xhci_ep_ctx *ep_ctx;
1128 struct xhci_td *td = NULL;
1129 enum xhci_ep_reset_type reset_type;
1130 struct xhci_command *command;
1131 int err;
1132
1133 if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) {
1134 if (!xhci->devs[slot_id])
1135 xhci_warn(xhci, "Stop endpoint command completion for disabled slot %u\n",
1136 slot_id);
1137 return;
1138 }
1139
1140 ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
1141 ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
1142 if (!ep)
1143 return;
1144
1145 ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
1146
1147 trace_xhci_handle_cmd_stop_ep(ep_ctx);
1148
1149 if (comp_code == COMP_CONTEXT_STATE_ERROR) {
1150 /*
1151 * If stop endpoint command raced with a halting endpoint we need to
1152 * reset the host side endpoint first.
1153 * If the TD we halted on isn't cancelled the TD should be given back
1154 * with a proper error code, and the ring dequeue moved past the TD.
1155 * If streams case we can't find hw_deq, or the TD we halted on so do a
1156 * soft reset.
1157 *
1158 * Proper error code is unknown here, it would be -EPIPE if device side
1159 * of enadpoit halted (aka STALL), and -EPROTO if not (transaction error)
1160 * We use -EPROTO, if device is stalled it should return a stall error on
1161 * next transfer, which then will return -EPIPE, and device side stall is
1162 * noted and cleared by class driver.
1163 */
1164 switch (GET_EP_CTX_STATE(ep_ctx)) {
1165 case EP_STATE_HALTED:
1166 xhci_dbg(xhci, "Stop ep completion raced with stall, reset ep\n");
1167 if (ep->ep_state & EP_HAS_STREAMS) {
1168 reset_type = EP_SOFT_RESET;
1169 } else {
1170 reset_type = EP_HARD_RESET;
1171 td = find_halted_td(ep);
1172 if (td)
1173 td->status = -EPROTO;
1174 }
1175 /* reset ep, reset handler cleans up cancelled tds */
1176 err = xhci_handle_halted_endpoint(xhci, ep, td, reset_type);
1177 if (err)
1178 break;
1179 ep->ep_state &= ~EP_STOP_CMD_PENDING;
1180 return;
1181 case EP_STATE_STOPPED:
1182 /*
1183 * Per xHCI 4.6.9, Stop Endpoint command on a Stopped
1184 * EP is a Context State Error, and EP stays Stopped.
1185 *
1186 * But maybe it failed on Halted, and somebody ran Reset
1187 * Endpoint later. EP state is now Stopped and EP_HALTED
1188 * still set because Reset EP handler will run after us.
1189 */
1190 if (ep->ep_state & EP_HALTED)
1191 break;
1192 /*
1193 * On some HCs EP state remains Stopped for some tens of
1194 * us to a few ms or more after a doorbell ring, and any
1195 * new Stop Endpoint fails without aborting the restart.
1196 * This handler may run quickly enough to still see this
1197 * Stopped state, but it will soon change to Running.
1198 *
1199 * Assume this bug on unexpected Stop Endpoint failures.
1200 * Keep retrying until the EP starts and stops again, on
1201 * chips where this is known to help. Wait for 100ms.
1202 */
1203 if (time_is_before_jiffies(ep->stop_time + msecs_to_jiffies(100)))
1204 break;
1205 fallthrough;
1206 case EP_STATE_RUNNING:
1207 /* Race, HW handled stop ep cmd before ep was running */
1208 xhci_dbg(xhci, "Stop ep completion ctx error, ctx_state %d\n",
1209 GET_EP_CTX_STATE(ep_ctx));
1210
1211 command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
1212 if (!command) {
1213 ep->ep_state &= ~EP_STOP_CMD_PENDING;
1214 return;
1215 }
1216 xhci_queue_stop_endpoint(xhci, command, slot_id, ep_index, 0);
1217 xhci_ring_cmd_db(xhci);
1218
1219 return;
1220 default:
1221 break;
1222 }
1223 }
1224
1225 /* will queue a set TR deq if stopped on a cancelled, uncleared TD */
1226 xhci_invalidate_cancelled_tds(ep);
1227 ep->ep_state &= ~EP_STOP_CMD_PENDING;
1228
1229 /* Otherwise ring the doorbell(s) to restart queued transfers */
1230 xhci_giveback_invalidated_tds(ep);
1231 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1232}
1233
1234static void xhci_kill_ring_urbs(struct xhci_hcd *xhci, struct xhci_ring *ring)
1235{
1236 struct xhci_td *cur_td;
1237 struct xhci_td *tmp;
1238
1239 list_for_each_entry_safe(cur_td, tmp, &ring->td_list, td_list) {
1240 list_del_init(&cur_td->td_list);
1241
1242 if (!list_empty(&cur_td->cancelled_td_list))
1243 list_del_init(&cur_td->cancelled_td_list);
1244
1245 xhci_unmap_td_bounce_buffer(xhci, ring, cur_td);
1246
1247 inc_td_cnt(cur_td->urb);
1248 if (last_td_in_urb(cur_td))
1249 xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
1250 }
1251}
1252
1253static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci,
1254 int slot_id, int ep_index)
1255{
1256 struct xhci_td *cur_td;
1257 struct xhci_td *tmp;
1258 struct xhci_virt_ep *ep;
1259 struct xhci_ring *ring;
1260
1261 ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
1262 if (!ep)
1263 return;
1264
1265 if ((ep->ep_state & EP_HAS_STREAMS) ||
1266 (ep->ep_state & EP_GETTING_NO_STREAMS)) {
1267 int stream_id;
1268
1269 for (stream_id = 1; stream_id < ep->stream_info->num_streams;
1270 stream_id++) {
1271 ring = ep->stream_info->stream_rings[stream_id];
1272 if (!ring)
1273 continue;
1274
1275 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1276 "Killing URBs for slot ID %u, ep index %u, stream %u",
1277 slot_id, ep_index, stream_id);
1278 xhci_kill_ring_urbs(xhci, ring);
1279 }
1280 } else {
1281 ring = ep->ring;
1282 if (!ring)
1283 return;
1284 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1285 "Killing URBs for slot ID %u, ep index %u",
1286 slot_id, ep_index);
1287 xhci_kill_ring_urbs(xhci, ring);
1288 }
1289
1290 list_for_each_entry_safe(cur_td, tmp, &ep->cancelled_td_list,
1291 cancelled_td_list) {
1292 list_del_init(&cur_td->cancelled_td_list);
1293 inc_td_cnt(cur_td->urb);
1294
1295 if (last_td_in_urb(cur_td))
1296 xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
1297 }
1298}
1299
1300/*
1301 * host controller died, register read returns 0xffffffff
1302 * Complete pending commands, mark them ABORTED.
1303 * URBs need to be given back as usb core might be waiting with device locks
1304 * held for the URBs to finish during device disconnect, blocking host remove.
1305 *
1306 * Call with xhci->lock held.
1307 * lock is relased and re-acquired while giving back urb.
1308 */
1309void xhci_hc_died(struct xhci_hcd *xhci)
1310{
1311 int i, j;
1312
1313 if (xhci->xhc_state & XHCI_STATE_DYING)
1314 return;
1315
1316 xhci_err(xhci, "xHCI host controller not responding, assume dead\n");
1317 xhci->xhc_state |= XHCI_STATE_DYING;
1318
1319 xhci_cleanup_command_queue(xhci);
1320
1321 /* return any pending urbs, remove may be waiting for them */
1322 for (i = 0; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
1323 if (!xhci->devs[i])
1324 continue;
1325 for (j = 0; j < 31; j++)
1326 xhci_kill_endpoint_urbs(xhci, i, j);
1327 }
1328
1329 /* inform usb core hc died if PCI remove isn't already handling it */
1330 if (!(xhci->xhc_state & XHCI_STATE_REMOVING))
1331 usb_hc_died(xhci_to_hcd(xhci));
1332}
1333
1334static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci,
1335 struct xhci_virt_device *dev,
1336 struct xhci_ring *ep_ring,
1337 unsigned int ep_index)
1338{
1339 union xhci_trb *dequeue_temp;
1340
1341 dequeue_temp = ep_ring->dequeue;
1342
1343 /* If we get two back-to-back stalls, and the first stalled transfer
1344 * ends just before a link TRB, the dequeue pointer will be left on
1345 * the link TRB by the code in the while loop. So we have to update
1346 * the dequeue pointer one segment further, or we'll jump off
1347 * the segment into la-la-land.
1348 */
1349 if (trb_is_link(ep_ring->dequeue)) {
1350 ep_ring->deq_seg = ep_ring->deq_seg->next;
1351 ep_ring->dequeue = ep_ring->deq_seg->trbs;
1352 }
1353
1354 while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
1355 /* We have more usable TRBs */
1356 ep_ring->dequeue++;
1357 if (trb_is_link(ep_ring->dequeue)) {
1358 if (ep_ring->dequeue ==
1359 dev->eps[ep_index].queued_deq_ptr)
1360 break;
1361 ep_ring->deq_seg = ep_ring->deq_seg->next;
1362 ep_ring->dequeue = ep_ring->deq_seg->trbs;
1363 }
1364 if (ep_ring->dequeue == dequeue_temp) {
1365 xhci_dbg(xhci, "Unable to find new dequeue pointer\n");
1366 break;
1367 }
1368 }
1369}
1370
1371/*
1372 * When we get a completion for a Set Transfer Ring Dequeue Pointer command,
1373 * we need to clear the set deq pending flag in the endpoint ring state, so that
1374 * the TD queueing code can ring the doorbell again. We also need to ring the
1375 * endpoint doorbell to restart the ring, but only if there aren't more
1376 * cancellations pending.
1377 */
1378static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
1379 union xhci_trb *trb, u32 cmd_comp_code)
1380{
1381 unsigned int ep_index;
1382 unsigned int stream_id;
1383 struct xhci_ring *ep_ring;
1384 struct xhci_virt_ep *ep;
1385 struct xhci_ep_ctx *ep_ctx;
1386 struct xhci_slot_ctx *slot_ctx;
1387 struct xhci_stream_ctx *stream_ctx;
1388 struct xhci_td *td, *tmp_td;
1389
1390 ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
1391 stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
1392 ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
1393 if (!ep)
1394 return;
1395
1396 ep_ring = xhci_virt_ep_to_ring(xhci, ep, stream_id);
1397 if (!ep_ring) {
1398 xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n",
1399 stream_id);
1400 /* XXX: Harmless??? */
1401 goto cleanup;
1402 }
1403
1404 ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
1405 slot_ctx = xhci_get_slot_ctx(xhci, ep->vdev->out_ctx);
1406 trace_xhci_handle_cmd_set_deq(slot_ctx);
1407 trace_xhci_handle_cmd_set_deq_ep(ep_ctx);
1408
1409 if (ep->ep_state & EP_HAS_STREAMS) {
1410 stream_ctx = &ep->stream_info->stream_ctx_array[stream_id];
1411 trace_xhci_handle_cmd_set_deq_stream(ep->stream_info, stream_id);
1412 }
1413
1414 if (cmd_comp_code != COMP_SUCCESS) {
1415 unsigned int ep_state;
1416 unsigned int slot_state;
1417
1418 switch (cmd_comp_code) {
1419 case COMP_TRB_ERROR:
1420 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because of stream ID configuration\n");
1421 break;
1422 case COMP_CONTEXT_STATE_ERROR:
1423 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.\n");
1424 ep_state = GET_EP_CTX_STATE(ep_ctx);
1425 slot_state = le32_to_cpu(slot_ctx->dev_state);
1426 slot_state = GET_SLOT_STATE(slot_state);
1427 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1428 "Slot state = %u, EP state = %u",
1429 slot_state, ep_state);
1430 break;
1431 case COMP_SLOT_NOT_ENABLED_ERROR:
1432 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because slot %u was not enabled.\n",
1433 slot_id);
1434 break;
1435 default:
1436 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown completion code of %u.\n",
1437 cmd_comp_code);
1438 break;
1439 }
1440 /* OK what do we do now? The endpoint state is hosed, and we
1441 * should never get to this point if the synchronization between
1442 * queueing, and endpoint state are correct. This might happen
1443 * if the device gets disconnected after we've finished
1444 * cancelling URBs, which might not be an error...
1445 */
1446 } else {
1447 u64 deq;
1448 /* 4.6.10 deq ptr is written to the stream ctx for streams */
1449 if (ep->ep_state & EP_HAS_STREAMS) {
1450 deq = le64_to_cpu(stream_ctx->stream_ring) & SCTX_DEQ_MASK;
1451
1452 /*
1453 * Cadence xHCI controllers store some endpoint state
1454 * information within Rsvd0 fields of Stream Endpoint
1455 * context. This field is not cleared during Set TR
1456 * Dequeue Pointer command which causes XDMA to skip
1457 * over transfer ring and leads to data loss on stream
1458 * pipe.
1459 * To fix this issue driver must clear Rsvd0 field.
1460 */
1461 if (xhci->quirks & XHCI_CDNS_SCTX_QUIRK) {
1462 stream_ctx->reserved[0] = 0;
1463 stream_ctx->reserved[1] = 0;
1464 }
1465 } else {
1466 deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK;
1467 }
1468 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1469 "Successful Set TR Deq Ptr cmd, deq = @%08llx", deq);
1470 if (xhci_trb_virt_to_dma(ep->queued_deq_seg,
1471 ep->queued_deq_ptr) == deq) {
1472 /* Update the ring's dequeue segment and dequeue pointer
1473 * to reflect the new position.
1474 */
1475 update_ring_for_set_deq_completion(xhci, ep->vdev,
1476 ep_ring, ep_index);
1477 } else {
1478 xhci_warn(xhci, "Mismatch between completed Set TR Deq Ptr command & xHCI internal state.\n");
1479 xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n",
1480 ep->queued_deq_seg, ep->queued_deq_ptr);
1481 }
1482 }
1483 /* HW cached TDs cleared from cache, give them back */
1484 list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list,
1485 cancelled_td_list) {
1486 ep_ring = xhci_urb_to_transfer_ring(ep->xhci, td->urb);
1487 if (td->cancel_status == TD_CLEARING_CACHE) {
1488 td->cancel_status = TD_CLEARED;
1489 xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n",
1490 __func__, td->urb);
1491 xhci_td_cleanup(ep->xhci, td, ep_ring, td->status);
1492 } else {
1493 xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n",
1494 __func__, td->urb, td->cancel_status);
1495 }
1496 }
1497cleanup:
1498 ep->ep_state &= ~SET_DEQ_PENDING;
1499 ep->queued_deq_seg = NULL;
1500 ep->queued_deq_ptr = NULL;
1501
1502 /* Check for deferred or newly cancelled TDs */
1503 if (!list_empty(&ep->cancelled_td_list)) {
1504 xhci_dbg(ep->xhci, "%s: Pending TDs to clear, continuing with invalidation\n",
1505 __func__);
1506 xhci_invalidate_cancelled_tds(ep);
1507 /* Try to restart the endpoint if all is done */
1508 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1509 /* Start giving back any TDs invalidated above */
1510 xhci_giveback_invalidated_tds(ep);
1511 } else {
1512 /* Restart any rings with pending URBs */
1513 xhci_dbg(ep->xhci, "%s: All TDs cleared, ring doorbell\n", __func__);
1514 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1515 }
1516}
1517
1518static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
1519 union xhci_trb *trb, u32 cmd_comp_code)
1520{
1521 struct xhci_virt_ep *ep;
1522 struct xhci_ep_ctx *ep_ctx;
1523 unsigned int ep_index;
1524
1525 ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
1526 ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
1527 if (!ep)
1528 return;
1529
1530 ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
1531 trace_xhci_handle_cmd_reset_ep(ep_ctx);
1532
1533 /* This command will only fail if the endpoint wasn't halted,
1534 * but we don't care.
1535 */
1536 xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
1537 "Ignoring reset ep completion code of %u", cmd_comp_code);
1538
1539 /* Cleanup cancelled TDs as ep is stopped. May queue a Set TR Deq cmd */
1540 xhci_invalidate_cancelled_tds(ep);
1541
1542 /* Clear our internal halted state */
1543 ep->ep_state &= ~EP_HALTED;
1544
1545 xhci_giveback_invalidated_tds(ep);
1546
1547 /* if this was a soft reset, then restart */
1548 if ((le32_to_cpu(trb->generic.field[3])) & TRB_TSP)
1549 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1550}
1551
1552static void xhci_handle_cmd_enable_slot(int slot_id, struct xhci_command *command,
1553 u32 cmd_comp_code)
1554{
1555 if (cmd_comp_code == COMP_SUCCESS)
1556 command->slot_id = slot_id;
1557 else
1558 command->slot_id = 0;
1559}
1560
1561static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id)
1562{
1563 struct xhci_virt_device *virt_dev;
1564 struct xhci_slot_ctx *slot_ctx;
1565
1566 virt_dev = xhci->devs[slot_id];
1567 if (!virt_dev)
1568 return;
1569
1570 slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
1571 trace_xhci_handle_cmd_disable_slot(slot_ctx);
1572
1573 if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
1574 /* Delete default control endpoint resources */
1575 xhci_free_device_endpoint_resources(xhci, virt_dev, true);
1576}
1577
1578static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id)
1579{
1580 struct xhci_virt_device *virt_dev;
1581 struct xhci_input_control_ctx *ctrl_ctx;
1582 struct xhci_ep_ctx *ep_ctx;
1583 unsigned int ep_index;
1584 u32 add_flags;
1585
1586 /*
1587 * Configure endpoint commands can come from the USB core configuration
1588 * or alt setting changes, or when streams were being configured.
1589 */
1590
1591 virt_dev = xhci->devs[slot_id];
1592 if (!virt_dev)
1593 return;
1594 ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
1595 if (!ctrl_ctx) {
1596 xhci_warn(xhci, "Could not get input context, bad type.\n");
1597 return;
1598 }
1599
1600 add_flags = le32_to_cpu(ctrl_ctx->add_flags);
1601
1602 /* Input ctx add_flags are the endpoint index plus one */
1603 ep_index = xhci_last_valid_endpoint(add_flags) - 1;
1604
1605 ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->out_ctx, ep_index);
1606 trace_xhci_handle_cmd_config_ep(ep_ctx);
1607
1608 return;
1609}
1610
1611static void xhci_handle_cmd_addr_dev(struct xhci_hcd *xhci, int slot_id)
1612{
1613 struct xhci_virt_device *vdev;
1614 struct xhci_slot_ctx *slot_ctx;
1615
1616 vdev = xhci->devs[slot_id];
1617 if (!vdev)
1618 return;
1619 slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
1620 trace_xhci_handle_cmd_addr_dev(slot_ctx);
1621}
1622
1623static void xhci_handle_cmd_reset_dev(struct xhci_hcd *xhci, int slot_id)
1624{
1625 struct xhci_virt_device *vdev;
1626 struct xhci_slot_ctx *slot_ctx;
1627
1628 vdev = xhci->devs[slot_id];
1629 if (!vdev) {
1630 xhci_warn(xhci, "Reset device command completion for disabled slot %u\n",
1631 slot_id);
1632 return;
1633 }
1634 slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
1635 trace_xhci_handle_cmd_reset_dev(slot_ctx);
1636
1637 xhci_dbg(xhci, "Completed reset device command.\n");
1638}
1639
1640static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci,
1641 struct xhci_event_cmd *event)
1642{
1643 if (!(xhci->quirks & XHCI_NEC_HOST)) {
1644 xhci_warn(xhci, "WARN NEC_GET_FW command on non-NEC host\n");
1645 return;
1646 }
1647 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
1648 "NEC firmware version %2x.%02x",
1649 NEC_FW_MAJOR(le32_to_cpu(event->status)),
1650 NEC_FW_MINOR(le32_to_cpu(event->status)));
1651}
1652
1653static void xhci_complete_del_and_free_cmd(struct xhci_command *cmd, u32 status)
1654{
1655 list_del(&cmd->cmd_list);
1656
1657 if (cmd->completion) {
1658 cmd->status = status;
1659 complete(cmd->completion);
1660 } else {
1661 kfree(cmd);
1662 }
1663}
1664
1665void xhci_cleanup_command_queue(struct xhci_hcd *xhci)
1666{
1667 struct xhci_command *cur_cmd, *tmp_cmd;
1668 xhci->current_cmd = NULL;
1669 list_for_each_entry_safe(cur_cmd, tmp_cmd, &xhci->cmd_list, cmd_list)
1670 xhci_complete_del_and_free_cmd(cur_cmd, COMP_COMMAND_ABORTED);
1671}
1672
1673void xhci_handle_command_timeout(struct work_struct *work)
1674{
1675 struct xhci_hcd *xhci;
1676 unsigned long flags;
1677 char str[XHCI_MSG_MAX];
1678 u64 hw_ring_state;
1679 u32 cmd_field3;
1680 u32 usbsts;
1681
1682 xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer);
1683
1684 spin_lock_irqsave(&xhci->lock, flags);
1685
1686 /*
1687 * If timeout work is pending, or current_cmd is NULL, it means we
1688 * raced with command completion. Command is handled so just return.
1689 */
1690 if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) {
1691 spin_unlock_irqrestore(&xhci->lock, flags);
1692 return;
1693 }
1694
1695 cmd_field3 = le32_to_cpu(xhci->current_cmd->command_trb->generic.field[3]);
1696 usbsts = readl(&xhci->op_regs->status);
1697 xhci_dbg(xhci, "Command timeout, USBSTS:%s\n", xhci_decode_usbsts(str, usbsts));
1698
1699 /* Bail out and tear down xhci if a stop endpoint command failed */
1700 if (TRB_FIELD_TO_TYPE(cmd_field3) == TRB_STOP_RING) {
1701 struct xhci_virt_ep *ep;
1702
1703 xhci_warn(xhci, "xHCI host not responding to stop endpoint command\n");
1704
1705 ep = xhci_get_virt_ep(xhci, TRB_TO_SLOT_ID(cmd_field3),
1706 TRB_TO_EP_INDEX(cmd_field3));
1707 if (ep)
1708 ep->ep_state &= ~EP_STOP_CMD_PENDING;
1709
1710 xhci_halt(xhci);
1711 xhci_hc_died(xhci);
1712 goto time_out_completed;
1713 }
1714
1715 /* mark this command to be cancelled */
1716 xhci->current_cmd->status = COMP_COMMAND_ABORTED;
1717
1718 /* Make sure command ring is running before aborting it */
1719 hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
1720 if (hw_ring_state == ~(u64)0) {
1721 xhci_hc_died(xhci);
1722 goto time_out_completed;
1723 }
1724
1725 if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
1726 (hw_ring_state & CMD_RING_RUNNING)) {
1727 /* Prevent new doorbell, and start command abort */
1728 xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
1729 xhci_dbg(xhci, "Command timeout\n");
1730 xhci_abort_cmd_ring(xhci, flags);
1731 goto time_out_completed;
1732 }
1733
1734 /* host removed. Bail out */
1735 if (xhci->xhc_state & XHCI_STATE_REMOVING) {
1736 xhci_dbg(xhci, "host removed, ring start fail?\n");
1737 xhci_cleanup_command_queue(xhci);
1738
1739 goto time_out_completed;
1740 }
1741
1742 /* command timeout on stopped ring, ring can't be aborted */
1743 xhci_dbg(xhci, "Command timeout on stopped ring\n");
1744 xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd);
1745
1746time_out_completed:
1747 spin_unlock_irqrestore(&xhci->lock, flags);
1748 return;
1749}
1750
1751static void handle_cmd_completion(struct xhci_hcd *xhci,
1752 struct xhci_event_cmd *event)
1753{
1754 unsigned int slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
1755 u64 cmd_dma;
1756 dma_addr_t cmd_dequeue_dma;
1757 u32 cmd_comp_code;
1758 union xhci_trb *cmd_trb;
1759 struct xhci_command *cmd;
1760 u32 cmd_type;
1761
1762 if (slot_id >= MAX_HC_SLOTS) {
1763 xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
1764 return;
1765 }
1766
1767 cmd_dma = le64_to_cpu(event->cmd_trb);
1768 cmd_trb = xhci->cmd_ring->dequeue;
1769
1770 trace_xhci_handle_command(xhci->cmd_ring, &cmd_trb->generic, cmd_dma);
1771
1772 cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status));
1773
1774 /* If CMD ring stopped we own the trbs between enqueue and dequeue */
1775 if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) {
1776 complete_all(&xhci->cmd_ring_stop_completion);
1777 return;
1778 }
1779
1780 cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
1781 cmd_trb);
1782 /*
1783 * Check whether the completion event is for our internal kept
1784 * command.
1785 */
1786 if (!cmd_dequeue_dma || cmd_dma != (u64)cmd_dequeue_dma) {
1787 xhci_warn(xhci,
1788 "ERROR mismatched command completion event\n");
1789 return;
1790 }
1791
1792 cmd = list_first_entry(&xhci->cmd_list, struct xhci_command, cmd_list);
1793
1794 cancel_delayed_work(&xhci->cmd_timer);
1795
1796 if (cmd->command_trb != xhci->cmd_ring->dequeue) {
1797 xhci_err(xhci,
1798 "Command completion event does not match command\n");
1799 return;
1800 }
1801
1802 /*
1803 * Host aborted the command ring, check if the current command was
1804 * supposed to be aborted, otherwise continue normally.
1805 * The command ring is stopped now, but the xHC will issue a Command
1806 * Ring Stopped event which will cause us to restart it.
1807 */
1808 if (cmd_comp_code == COMP_COMMAND_ABORTED) {
1809 xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
1810 if (cmd->status == COMP_COMMAND_ABORTED) {
1811 if (xhci->current_cmd == cmd)
1812 xhci->current_cmd = NULL;
1813 goto event_handled;
1814 }
1815 }
1816
1817 cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
1818 switch (cmd_type) {
1819 case TRB_ENABLE_SLOT:
1820 xhci_handle_cmd_enable_slot(slot_id, cmd, cmd_comp_code);
1821 break;
1822 case TRB_DISABLE_SLOT:
1823 xhci_handle_cmd_disable_slot(xhci, slot_id);
1824 break;
1825 case TRB_CONFIG_EP:
1826 if (!cmd->completion)
1827 xhci_handle_cmd_config_ep(xhci, slot_id);
1828 break;
1829 case TRB_EVAL_CONTEXT:
1830 break;
1831 case TRB_ADDR_DEV:
1832 xhci_handle_cmd_addr_dev(xhci, slot_id);
1833 break;
1834 case TRB_STOP_RING:
1835 WARN_ON(slot_id != TRB_TO_SLOT_ID(
1836 le32_to_cpu(cmd_trb->generic.field[3])));
1837 if (!cmd->completion)
1838 xhci_handle_cmd_stop_ep(xhci, slot_id, cmd_trb,
1839 cmd_comp_code);
1840 break;
1841 case TRB_SET_DEQ:
1842 WARN_ON(slot_id != TRB_TO_SLOT_ID(
1843 le32_to_cpu(cmd_trb->generic.field[3])));
1844 xhci_handle_cmd_set_deq(xhci, slot_id, cmd_trb, cmd_comp_code);
1845 break;
1846 case TRB_CMD_NOOP:
1847 /* Is this an aborted command turned to NO-OP? */
1848 if (cmd->status == COMP_COMMAND_RING_STOPPED)
1849 cmd_comp_code = COMP_COMMAND_RING_STOPPED;
1850 break;
1851 case TRB_RESET_EP:
1852 WARN_ON(slot_id != TRB_TO_SLOT_ID(
1853 le32_to_cpu(cmd_trb->generic.field[3])));
1854 xhci_handle_cmd_reset_ep(xhci, slot_id, cmd_trb, cmd_comp_code);
1855 break;
1856 case TRB_RESET_DEV:
1857 /* SLOT_ID field in reset device cmd completion event TRB is 0.
1858 * Use the SLOT_ID from the command TRB instead (xhci 4.6.11)
1859 */
1860 slot_id = TRB_TO_SLOT_ID(
1861 le32_to_cpu(cmd_trb->generic.field[3]));
1862 xhci_handle_cmd_reset_dev(xhci, slot_id);
1863 break;
1864 case TRB_NEC_GET_FW:
1865 xhci_handle_cmd_nec_get_fw(xhci, event);
1866 break;
1867 default:
1868 /* Skip over unknown commands on the event ring */
1869 xhci_info(xhci, "INFO unknown command type %d\n", cmd_type);
1870 break;
1871 }
1872
1873 /* restart timer if this wasn't the last command */
1874 if (!list_is_singular(&xhci->cmd_list)) {
1875 xhci->current_cmd = list_first_entry(&cmd->cmd_list,
1876 struct xhci_command, cmd_list);
1877 xhci_mod_cmd_timer(xhci);
1878 } else if (xhci->current_cmd == cmd) {
1879 xhci->current_cmd = NULL;
1880 }
1881
1882event_handled:
1883 xhci_complete_del_and_free_cmd(cmd, cmd_comp_code);
1884
1885 inc_deq(xhci, xhci->cmd_ring);
1886}
1887
1888static void handle_vendor_event(struct xhci_hcd *xhci,
1889 union xhci_trb *event, u32 trb_type)
1890{
1891 xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);
1892 if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST))
1893 handle_cmd_completion(xhci, &event->event_cmd);
1894}
1895
1896static void handle_device_notification(struct xhci_hcd *xhci,
1897 union xhci_trb *event)
1898{
1899 u32 slot_id;
1900 struct usb_device *udev;
1901
1902 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->generic.field[3]));
1903 if (!xhci->devs[slot_id]) {
1904 xhci_warn(xhci, "Device Notification event for "
1905 "unused slot %u\n", slot_id);
1906 return;
1907 }
1908
1909 xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",
1910 slot_id);
1911 udev = xhci->devs[slot_id]->udev;
1912 if (udev && udev->parent)
1913 usb_wakeup_notification(udev->parent, udev->portnum);
1914}
1915
1916/*
1917 * Quirk hanlder for errata seen on Cavium ThunderX2 processor XHCI
1918 * Controller.
1919 * As per ThunderX2errata-129 USB 2 device may come up as USB 1
1920 * If a connection to a USB 1 device is followed by another connection
1921 * to a USB 2 device.
1922 *
1923 * Reset the PHY after the USB device is disconnected if device speed
1924 * is less than HCD_USB3.
1925 * Retry the reset sequence max of 4 times checking the PLL lock status.
1926 *
1927 */
1928static void xhci_cavium_reset_phy_quirk(struct xhci_hcd *xhci)
1929{
1930 struct usb_hcd *hcd = xhci_to_hcd(xhci);
1931 u32 pll_lock_check;
1932 u32 retry_count = 4;
1933
1934 do {
1935 /* Assert PHY reset */
1936 writel(0x6F, hcd->regs + 0x1048);
1937 udelay(10);
1938 /* De-assert the PHY reset */
1939 writel(0x7F, hcd->regs + 0x1048);
1940 udelay(200);
1941 pll_lock_check = readl(hcd->regs + 0x1070);
1942 } while (!(pll_lock_check & 0x1) && --retry_count);
1943}
1944
1945static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event)
1946{
1947 struct usb_hcd *hcd;
1948 u32 port_id;
1949 u32 portsc, cmd_reg;
1950 int max_ports;
1951 unsigned int hcd_portnum;
1952 struct xhci_bus_state *bus_state;
1953 bool bogus_port_status = false;
1954 struct xhci_port *port;
1955
1956 /* Port status change events always have a successful completion code */
1957 if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS)
1958 xhci_warn(xhci,
1959 "WARN: xHC returned failed port status event\n");
1960
1961 port_id = GET_PORT_ID(le32_to_cpu(event->generic.field[0]));
1962 max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
1963
1964 if ((port_id <= 0) || (port_id > max_ports)) {
1965 xhci_warn(xhci, "Port change event with invalid port ID %d\n",
1966 port_id);
1967 return;
1968 }
1969
1970 port = &xhci->hw_ports[port_id - 1];
1971 if (!port || !port->rhub || port->hcd_portnum == DUPLICATE_ENTRY) {
1972 xhci_warn(xhci, "Port change event, no port for port ID %u\n",
1973 port_id);
1974 bogus_port_status = true;
1975 goto cleanup;
1976 }
1977
1978 /* We might get interrupts after shared_hcd is removed */
1979 if (port->rhub == &xhci->usb3_rhub && xhci->shared_hcd == NULL) {
1980 xhci_dbg(xhci, "ignore port event for removed USB3 hcd\n");
1981 bogus_port_status = true;
1982 goto cleanup;
1983 }
1984
1985 hcd = port->rhub->hcd;
1986 bus_state = &port->rhub->bus_state;
1987 hcd_portnum = port->hcd_portnum;
1988 portsc = readl(port->addr);
1989
1990 xhci_dbg(xhci, "Port change event, %d-%d, id %d, portsc: 0x%x\n",
1991 hcd->self.busnum, hcd_portnum + 1, port_id, portsc);
1992
1993 trace_xhci_handle_port_status(port, portsc);
1994
1995 if (hcd->state == HC_STATE_SUSPENDED) {
1996 xhci_dbg(xhci, "resume root hub\n");
1997 usb_hcd_resume_root_hub(hcd);
1998 }
1999
2000 if (hcd->speed >= HCD_USB3 &&
2001 (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) {
2002 if (port->slot_id && xhci->devs[port->slot_id])
2003 xhci->devs[port->slot_id]->flags |= VDEV_PORT_ERROR;
2004 }
2005
2006 if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) {
2007 xhci_dbg(xhci, "port resume event for port %d\n", port_id);
2008
2009 cmd_reg = readl(&xhci->op_regs->command);
2010 if (!(cmd_reg & CMD_RUN)) {
2011 xhci_warn(xhci, "xHC is not running.\n");
2012 goto cleanup;
2013 }
2014
2015 if (DEV_SUPERSPEED_ANY(portsc)) {
2016 xhci_dbg(xhci, "remote wake SS port %d\n", port_id);
2017 /* Set a flag to say the port signaled remote wakeup,
2018 * so we can tell the difference between the end of
2019 * device and host initiated resume.
2020 */
2021 bus_state->port_remote_wakeup |= 1 << hcd_portnum;
2022 xhci_test_and_clear_bit(xhci, port, PORT_PLC);
2023 usb_hcd_start_port_resume(&hcd->self, hcd_portnum);
2024 xhci_set_link_state(xhci, port, XDEV_U0);
2025 /* Need to wait until the next link state change
2026 * indicates the device is actually in U0.
2027 */
2028 bogus_port_status = true;
2029 goto cleanup;
2030 } else if (!test_bit(hcd_portnum, &bus_state->resuming_ports)) {
2031 xhci_dbg(xhci, "resume HS port %d\n", port_id);
2032 port->resume_timestamp = jiffies +
2033 msecs_to_jiffies(USB_RESUME_TIMEOUT);
2034 set_bit(hcd_portnum, &bus_state->resuming_ports);
2035 /* Do the rest in GetPortStatus after resume time delay.
2036 * Avoid polling roothub status before that so that a
2037 * usb device auto-resume latency around ~40ms.
2038 */
2039 set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2040 mod_timer(&hcd->rh_timer,
2041 port->resume_timestamp);
2042 usb_hcd_start_port_resume(&hcd->self, hcd_portnum);
2043 bogus_port_status = true;
2044 }
2045 }
2046
2047 if ((portsc & PORT_PLC) &&
2048 DEV_SUPERSPEED_ANY(portsc) &&
2049 ((portsc & PORT_PLS_MASK) == XDEV_U0 ||
2050 (portsc & PORT_PLS_MASK) == XDEV_U1 ||
2051 (portsc & PORT_PLS_MASK) == XDEV_U2)) {
2052 xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
2053 complete(&port->u3exit_done);
2054 /* We've just brought the device into U0/1/2 through either the
2055 * Resume state after a device remote wakeup, or through the
2056 * U3Exit state after a host-initiated resume. If it's a device
2057 * initiated remote wake, don't pass up the link state change,
2058 * so the roothub behavior is consistent with external
2059 * USB 3.0 hub behavior.
2060 */
2061 if (port->slot_id && xhci->devs[port->slot_id])
2062 xhci_ring_device(xhci, port->slot_id);
2063 if (bus_state->port_remote_wakeup & (1 << hcd_portnum)) {
2064 xhci_test_and_clear_bit(xhci, port, PORT_PLC);
2065 usb_wakeup_notification(hcd->self.root_hub,
2066 hcd_portnum + 1);
2067 bogus_port_status = true;
2068 goto cleanup;
2069 }
2070 }
2071
2072 /*
2073 * Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
2074 * RExit to a disconnect state). If so, let the driver know it's
2075 * out of the RExit state.
2076 */
2077 if (hcd->speed < HCD_USB3 && port->rexit_active) {
2078 complete(&port->rexit_done);
2079 port->rexit_active = false;
2080 bogus_port_status = true;
2081 goto cleanup;
2082 }
2083
2084 if (hcd->speed < HCD_USB3) {
2085 xhci_test_and_clear_bit(xhci, port, PORT_PLC);
2086 if ((xhci->quirks & XHCI_RESET_PLL_ON_DISCONNECT) &&
2087 (portsc & PORT_CSC) && !(portsc & PORT_CONNECT))
2088 xhci_cavium_reset_phy_quirk(xhci);
2089 }
2090
2091cleanup:
2092
2093 /* Don't make the USB core poll the roothub if we got a bad port status
2094 * change event. Besides, at that point we can't tell which roothub
2095 * (USB 2.0 or USB 3.0) to kick.
2096 */
2097 if (bogus_port_status)
2098 return;
2099
2100 /*
2101 * xHCI port-status-change events occur when the "or" of all the
2102 * status-change bits in the portsc register changes from 0 to 1.
2103 * New status changes won't cause an event if any other change
2104 * bits are still set. When an event occurs, switch over to
2105 * polling to avoid losing status changes.
2106 */
2107 xhci_dbg(xhci, "%s: starting usb%d port polling.\n",
2108 __func__, hcd->self.busnum);
2109 set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2110 spin_unlock(&xhci->lock);
2111 /* Pass this up to the core */
2112 usb_hcd_poll_rh_status(hcd);
2113 spin_lock(&xhci->lock);
2114}
2115
2116/*
2117 * If the suspect DMA address is a TRB in this TD, this function returns that
2118 * TRB's segment. Otherwise it returns 0.
2119 */
2120struct xhci_segment *trb_in_td(struct xhci_hcd *xhci, struct xhci_td *td, dma_addr_t suspect_dma,
2121 bool debug)
2122{
2123 dma_addr_t start_dma;
2124 dma_addr_t end_seg_dma;
2125 dma_addr_t end_trb_dma;
2126 struct xhci_segment *cur_seg;
2127
2128 start_dma = xhci_trb_virt_to_dma(td->start_seg, td->start_trb);
2129 cur_seg = td->start_seg;
2130
2131 do {
2132 if (start_dma == 0)
2133 return NULL;
2134 /* We may get an event for a Link TRB in the middle of a TD */
2135 end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
2136 &cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
2137 /* If the end TRB isn't in this segment, this is set to 0 */
2138 end_trb_dma = xhci_trb_virt_to_dma(cur_seg, td->end_trb);
2139
2140 if (debug)
2141 xhci_warn(xhci,
2142 "Looking for event-dma %016llx trb-start %016llx trb-end %016llx seg-start %016llx seg-end %016llx\n",
2143 (unsigned long long)suspect_dma,
2144 (unsigned long long)start_dma,
2145 (unsigned long long)end_trb_dma,
2146 (unsigned long long)cur_seg->dma,
2147 (unsigned long long)end_seg_dma);
2148
2149 if (end_trb_dma > 0) {
2150 /* The end TRB is in this segment, so suspect should be here */
2151 if (start_dma <= end_trb_dma) {
2152 if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
2153 return cur_seg;
2154 } else {
2155 /* Case for one segment with
2156 * a TD wrapped around to the top
2157 */
2158 if ((suspect_dma >= start_dma &&
2159 suspect_dma <= end_seg_dma) ||
2160 (suspect_dma >= cur_seg->dma &&
2161 suspect_dma <= end_trb_dma))
2162 return cur_seg;
2163 }
2164 return NULL;
2165 } else {
2166 /* Might still be somewhere in this segment */
2167 if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
2168 return cur_seg;
2169 }
2170 cur_seg = cur_seg->next;
2171 start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
2172 } while (cur_seg != td->start_seg);
2173
2174 return NULL;
2175}
2176
2177static void xhci_clear_hub_tt_buffer(struct xhci_hcd *xhci, struct xhci_td *td,
2178 struct xhci_virt_ep *ep)
2179{
2180 /*
2181 * As part of low/full-speed endpoint-halt processing
2182 * we must clear the TT buffer (USB 2.0 specification 11.17.5).
2183 */
2184 if (td->urb->dev->tt && !usb_pipeint(td->urb->pipe) &&
2185 (td->urb->dev->tt->hub != xhci_to_hcd(xhci)->self.root_hub) &&
2186 !(ep->ep_state & EP_CLEARING_TT)) {
2187 ep->ep_state |= EP_CLEARING_TT;
2188 td->urb->ep->hcpriv = td->urb->dev;
2189 if (usb_hub_clear_tt_buffer(td->urb))
2190 ep->ep_state &= ~EP_CLEARING_TT;
2191 }
2192}
2193
2194/*
2195 * Check if xhci internal endpoint state has gone to a "halt" state due to an
2196 * error or stall, including default control pipe protocol stall.
2197 * The internal halt needs to be cleared with a reset endpoint command.
2198 *
2199 * External device side is also halted in functional stall cases. Class driver
2200 * will clear the device halt with a CLEAR_FEATURE(ENDPOINT_HALT) request later.
2201 */
2202static bool xhci_halted_host_endpoint(struct xhci_ep_ctx *ep_ctx, unsigned int comp_code)
2203{
2204 /* Stall halts both internal and device side endpoint */
2205 if (comp_code == COMP_STALL_ERROR)
2206 return true;
2207
2208 /* TRB completion codes that may require internal halt cleanup */
2209 if (comp_code == COMP_USB_TRANSACTION_ERROR ||
2210 comp_code == COMP_BABBLE_DETECTED_ERROR ||
2211 comp_code == COMP_SPLIT_TRANSACTION_ERROR)
2212 /*
2213 * The 0.95 spec says a babbling control endpoint is not halted.
2214 * The 0.96 spec says it is. Some HW claims to be 0.95
2215 * compliant, but it halts the control endpoint anyway.
2216 * Check endpoint context if endpoint is halted.
2217 */
2218 if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_HALTED)
2219 return true;
2220
2221 return false;
2222}
2223
2224int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
2225{
2226 if (trb_comp_code >= 224 && trb_comp_code <= 255) {
2227 /* Vendor defined "informational" completion code,
2228 * treat as not-an-error.
2229 */
2230 xhci_dbg(xhci, "Vendor defined info completion code %u\n",
2231 trb_comp_code);
2232 xhci_dbg(xhci, "Treating code as success.\n");
2233 return 1;
2234 }
2235 return 0;
2236}
2237
2238static void finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
2239 struct xhci_ring *ep_ring, struct xhci_td *td,
2240 u32 trb_comp_code)
2241{
2242 struct xhci_ep_ctx *ep_ctx;
2243
2244 ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index);
2245
2246 switch (trb_comp_code) {
2247 case COMP_STOPPED_LENGTH_INVALID:
2248 case COMP_STOPPED_SHORT_PACKET:
2249 case COMP_STOPPED:
2250 /*
2251 * The "Stop Endpoint" completion will take care of any
2252 * stopped TDs. A stopped TD may be restarted, so don't update
2253 * the ring dequeue pointer or take this TD off any lists yet.
2254 */
2255 return;
2256 case COMP_USB_TRANSACTION_ERROR:
2257 case COMP_BABBLE_DETECTED_ERROR:
2258 case COMP_SPLIT_TRANSACTION_ERROR:
2259 /*
2260 * If endpoint context state is not halted we might be
2261 * racing with a reset endpoint command issued by a unsuccessful
2262 * stop endpoint completion (context error). In that case the
2263 * td should be on the cancelled list, and EP_HALTED flag set.
2264 *
2265 * Or then it's not halted due to the 0.95 spec stating that a
2266 * babbling control endpoint should not halt. The 0.96 spec
2267 * again says it should. Some HW claims to be 0.95 compliant,
2268 * but it halts the control endpoint anyway.
2269 */
2270 if (GET_EP_CTX_STATE(ep_ctx) != EP_STATE_HALTED) {
2271 /*
2272 * If EP_HALTED is set and TD is on the cancelled list
2273 * the TD and dequeue pointer will be handled by reset
2274 * ep command completion
2275 */
2276 if ((ep->ep_state & EP_HALTED) &&
2277 !list_empty(&td->cancelled_td_list)) {
2278 xhci_dbg(xhci, "Already resolving halted ep for 0x%llx\n",
2279 (unsigned long long)xhci_trb_virt_to_dma(
2280 td->start_seg, td->start_trb));
2281 return;
2282 }
2283 /* endpoint not halted, don't reset it */
2284 break;
2285 }
2286 /* Almost same procedure as for STALL_ERROR below */
2287 xhci_clear_hub_tt_buffer(xhci, td, ep);
2288 xhci_handle_halted_endpoint(xhci, ep, td, EP_HARD_RESET);
2289 return;
2290 case COMP_STALL_ERROR:
2291 /*
2292 * xhci internal endpoint state will go to a "halt" state for
2293 * any stall, including default control pipe protocol stall.
2294 * To clear the host side halt we need to issue a reset endpoint
2295 * command, followed by a set dequeue command to move past the
2296 * TD.
2297 * Class drivers clear the device side halt from a functional
2298 * stall later. Hub TT buffer should only be cleared for FS/LS
2299 * devices behind HS hubs for functional stalls.
2300 */
2301 if (ep->ep_index != 0)
2302 xhci_clear_hub_tt_buffer(xhci, td, ep);
2303
2304 xhci_handle_halted_endpoint(xhci, ep, td, EP_HARD_RESET);
2305
2306 return; /* xhci_handle_halted_endpoint marked td cancelled */
2307 default:
2308 break;
2309 }
2310
2311 xhci_dequeue_td(xhci, td, ep_ring, td->status);
2312}
2313
2314/* sum trb lengths from the first trb up to stop_trb, _excluding_ stop_trb */
2315static u32 sum_trb_lengths(struct xhci_td *td, union xhci_trb *stop_trb)
2316{
2317 u32 sum;
2318 union xhci_trb *trb = td->start_trb;
2319 struct xhci_segment *seg = td->start_seg;
2320
2321 for (sum = 0; trb != stop_trb; next_trb(&seg, &trb)) {
2322 if (!trb_is_noop(trb) && !trb_is_link(trb))
2323 sum += TRB_LEN(le32_to_cpu(trb->generic.field[2]));
2324 }
2325 return sum;
2326}
2327
2328/*
2329 * Process control tds, update urb status and actual_length.
2330 */
2331static void process_ctrl_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
2332 struct xhci_ring *ep_ring, struct xhci_td *td,
2333 union xhci_trb *ep_trb, struct xhci_transfer_event *event)
2334{
2335 struct xhci_ep_ctx *ep_ctx;
2336 u32 trb_comp_code;
2337 u32 remaining, requested;
2338 u32 trb_type;
2339
2340 trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(ep_trb->generic.field[3]));
2341 ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index);
2342 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2343 requested = td->urb->transfer_buffer_length;
2344 remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
2345
2346 switch (trb_comp_code) {
2347 case COMP_SUCCESS:
2348 if (trb_type != TRB_STATUS) {
2349 xhci_warn(xhci, "WARN: Success on ctrl %s TRB without IOC set?\n",
2350 (trb_type == TRB_DATA) ? "data" : "setup");
2351 td->status = -ESHUTDOWN;
2352 break;
2353 }
2354 td->status = 0;
2355 break;
2356 case COMP_SHORT_PACKET:
2357 td->status = 0;
2358 break;
2359 case COMP_STOPPED_SHORT_PACKET:
2360 if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
2361 td->urb->actual_length = remaining;
2362 else
2363 xhci_warn(xhci, "WARN: Stopped Short Packet on ctrl setup or status TRB\n");
2364 goto finish_td;
2365 case COMP_STOPPED:
2366 switch (trb_type) {
2367 case TRB_SETUP:
2368 td->urb->actual_length = 0;
2369 goto finish_td;
2370 case TRB_DATA:
2371 case TRB_NORMAL:
2372 td->urb->actual_length = requested - remaining;
2373 goto finish_td;
2374 case TRB_STATUS:
2375 td->urb->actual_length = requested;
2376 goto finish_td;
2377 default:
2378 xhci_warn(xhci, "WARN: unexpected TRB Type %d\n",
2379 trb_type);
2380 goto finish_td;
2381 }
2382 case COMP_STOPPED_LENGTH_INVALID:
2383 goto finish_td;
2384 default:
2385 if (!xhci_halted_host_endpoint(ep_ctx, trb_comp_code))
2386 break;
2387 xhci_dbg(xhci, "TRB error %u, halted endpoint index = %u\n",
2388 trb_comp_code, ep->ep_index);
2389 fallthrough;
2390 case COMP_STALL_ERROR:
2391 /* Did we transfer part of the data (middle) phase? */
2392 if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
2393 td->urb->actual_length = requested - remaining;
2394 else if (!td->urb_length_set)
2395 td->urb->actual_length = 0;
2396 goto finish_td;
2397 }
2398
2399 /* stopped at setup stage, no data transferred */
2400 if (trb_type == TRB_SETUP)
2401 goto finish_td;
2402
2403 /*
2404 * if on data stage then update the actual_length of the URB and flag it
2405 * as set, so it won't be overwritten in the event for the last TRB.
2406 */
2407 if (trb_type == TRB_DATA ||
2408 trb_type == TRB_NORMAL) {
2409 td->urb_length_set = true;
2410 td->urb->actual_length = requested - remaining;
2411 xhci_dbg(xhci, "Waiting for status stage event\n");
2412 return;
2413 }
2414
2415 /* at status stage */
2416 if (!td->urb_length_set)
2417 td->urb->actual_length = requested;
2418
2419finish_td:
2420 finish_td(xhci, ep, ep_ring, td, trb_comp_code);
2421}
2422
2423/*
2424 * Process isochronous tds, update urb packet status and actual_length.
2425 */
2426static void process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
2427 struct xhci_ring *ep_ring, struct xhci_td *td,
2428 union xhci_trb *ep_trb, struct xhci_transfer_event *event)
2429{
2430 struct urb_priv *urb_priv;
2431 int idx;
2432 struct usb_iso_packet_descriptor *frame;
2433 u32 trb_comp_code;
2434 bool sum_trbs_for_length = false;
2435 u32 remaining, requested, ep_trb_len;
2436 int short_framestatus;
2437
2438 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2439 urb_priv = td->urb->hcpriv;
2440 idx = urb_priv->num_tds_done;
2441 frame = &td->urb->iso_frame_desc[idx];
2442 requested = frame->length;
2443 remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
2444 ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
2445 short_framestatus = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
2446 -EREMOTEIO : 0;
2447
2448 /* handle completion code */
2449 switch (trb_comp_code) {
2450 case COMP_SUCCESS:
2451 /* Don't overwrite status if TD had an error, see xHCI 4.9.1 */
2452 if (td->error_mid_td)
2453 break;
2454 if (remaining) {
2455 frame->status = short_framestatus;
2456 sum_trbs_for_length = true;
2457 break;
2458 }
2459 frame->status = 0;
2460 break;
2461 case COMP_SHORT_PACKET:
2462 frame->status = short_framestatus;
2463 sum_trbs_for_length = true;
2464 break;
2465 case COMP_BANDWIDTH_OVERRUN_ERROR:
2466 frame->status = -ECOMM;
2467 break;
2468 case COMP_BABBLE_DETECTED_ERROR:
2469 sum_trbs_for_length = true;
2470 fallthrough;
2471 case COMP_ISOCH_BUFFER_OVERRUN:
2472 frame->status = -EOVERFLOW;
2473 if (ep_trb != td->end_trb)
2474 td->error_mid_td = true;
2475 break;
2476 case COMP_INCOMPATIBLE_DEVICE_ERROR:
2477 case COMP_STALL_ERROR:
2478 frame->status = -EPROTO;
2479 break;
2480 case COMP_USB_TRANSACTION_ERROR:
2481 frame->status = -EPROTO;
2482 sum_trbs_for_length = true;
2483 if (ep_trb != td->end_trb)
2484 td->error_mid_td = true;
2485 break;
2486 case COMP_STOPPED:
2487 sum_trbs_for_length = true;
2488 break;
2489 case COMP_STOPPED_SHORT_PACKET:
2490 /* field normally containing residue now contains transferred */
2491 frame->status = short_framestatus;
2492 requested = remaining;
2493 break;
2494 case COMP_STOPPED_LENGTH_INVALID:
2495 /* exclude stopped trb with invalid length from length sum */
2496 sum_trbs_for_length = true;
2497 ep_trb_len = 0;
2498 remaining = 0;
2499 break;
2500 default:
2501 sum_trbs_for_length = true;
2502 frame->status = -1;
2503 break;
2504 }
2505
2506 if (td->urb_length_set)
2507 goto finish_td;
2508
2509 if (sum_trbs_for_length)
2510 frame->actual_length = sum_trb_lengths(td, ep_trb) +
2511 ep_trb_len - remaining;
2512 else
2513 frame->actual_length = requested;
2514
2515 td->urb->actual_length += frame->actual_length;
2516
2517finish_td:
2518 /* Don't give back TD yet if we encountered an error mid TD */
2519 if (td->error_mid_td && ep_trb != td->end_trb) {
2520 xhci_dbg(xhci, "Error mid isoc TD, wait for final completion event\n");
2521 td->urb_length_set = true;
2522 return;
2523 }
2524 finish_td(xhci, ep, ep_ring, td, trb_comp_code);
2525}
2526
2527static void skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
2528 struct xhci_virt_ep *ep, int status)
2529{
2530 struct urb_priv *urb_priv;
2531 struct usb_iso_packet_descriptor *frame;
2532 int idx;
2533
2534 urb_priv = td->urb->hcpriv;
2535 idx = urb_priv->num_tds_done;
2536 frame = &td->urb->iso_frame_desc[idx];
2537
2538 /* The transfer is partly done. */
2539 frame->status = -EXDEV;
2540
2541 /* calc actual length */
2542 frame->actual_length = 0;
2543
2544 xhci_dequeue_td(xhci, td, ep->ring, status);
2545}
2546
2547/*
2548 * Process bulk and interrupt tds, update urb status and actual_length.
2549 */
2550static void process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
2551 struct xhci_ring *ep_ring, struct xhci_td *td,
2552 union xhci_trb *ep_trb, struct xhci_transfer_event *event)
2553{
2554 struct xhci_slot_ctx *slot_ctx;
2555 u32 trb_comp_code;
2556 u32 remaining, requested, ep_trb_len;
2557
2558 slot_ctx = xhci_get_slot_ctx(xhci, ep->vdev->out_ctx);
2559 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2560 remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
2561 ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
2562 requested = td->urb->transfer_buffer_length;
2563
2564 switch (trb_comp_code) {
2565 case COMP_SUCCESS:
2566 ep->err_count = 0;
2567 /* handle success with untransferred data as short packet */
2568 if (ep_trb != td->end_trb || remaining) {
2569 xhci_warn(xhci, "WARN Successful completion on short TX\n");
2570 xhci_dbg(xhci, "ep %#x - asked for %d bytes, %d bytes untransferred\n",
2571 td->urb->ep->desc.bEndpointAddress,
2572 requested, remaining);
2573 }
2574 td->status = 0;
2575 break;
2576 case COMP_SHORT_PACKET:
2577 td->status = 0;
2578 break;
2579 case COMP_STOPPED_SHORT_PACKET:
2580 td->urb->actual_length = remaining;
2581 goto finish_td;
2582 case COMP_STOPPED_LENGTH_INVALID:
2583 /* stopped on ep trb with invalid length, exclude it */
2584 td->urb->actual_length = sum_trb_lengths(td, ep_trb);
2585 goto finish_td;
2586 case COMP_USB_TRANSACTION_ERROR:
2587 if (xhci->quirks & XHCI_NO_SOFT_RETRY ||
2588 (ep->err_count++ > MAX_SOFT_RETRY) ||
2589 le32_to_cpu(slot_ctx->tt_info) & TT_SLOT)
2590 break;
2591
2592 td->status = 0;
2593
2594 xhci_handle_halted_endpoint(xhci, ep, td, EP_SOFT_RESET);
2595 return;
2596 default:
2597 /* do nothing */
2598 break;
2599 }
2600
2601 if (ep_trb == td->end_trb)
2602 td->urb->actual_length = requested - remaining;
2603 else
2604 td->urb->actual_length =
2605 sum_trb_lengths(td, ep_trb) +
2606 ep_trb_len - remaining;
2607finish_td:
2608 if (remaining > requested) {
2609 xhci_warn(xhci, "bad transfer trb length %d in event trb\n",
2610 remaining);
2611 td->urb->actual_length = 0;
2612 }
2613
2614 finish_td(xhci, ep, ep_ring, td, trb_comp_code);
2615}
2616
2617/* Transfer events which don't point to a transfer TRB, see xhci 4.17.4 */
2618static int handle_transferless_tx_event(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
2619 u32 trb_comp_code)
2620{
2621 switch (trb_comp_code) {
2622 case COMP_STALL_ERROR:
2623 case COMP_USB_TRANSACTION_ERROR:
2624 case COMP_INVALID_STREAM_TYPE_ERROR:
2625 case COMP_INVALID_STREAM_ID_ERROR:
2626 xhci_dbg(xhci, "Stream transaction error ep %u no id\n", ep->ep_index);
2627 if (ep->err_count++ > MAX_SOFT_RETRY)
2628 xhci_handle_halted_endpoint(xhci, ep, NULL, EP_HARD_RESET);
2629 else
2630 xhci_handle_halted_endpoint(xhci, ep, NULL, EP_SOFT_RESET);
2631 break;
2632 case COMP_RING_UNDERRUN:
2633 case COMP_RING_OVERRUN:
2634 case COMP_STOPPED_LENGTH_INVALID:
2635 break;
2636 default:
2637 xhci_err(xhci, "Transfer event %u for unknown stream ring slot %u ep %u\n",
2638 trb_comp_code, ep->vdev->slot_id, ep->ep_index);
2639 return -ENODEV;
2640 }
2641 return 0;
2642}
2643
2644/*
2645 * If this function returns an error condition, it means it got a Transfer
2646 * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
2647 * At this point, the host controller is probably hosed and should be reset.
2648 */
2649static int handle_tx_event(struct xhci_hcd *xhci,
2650 struct xhci_interrupter *ir,
2651 struct xhci_transfer_event *event)
2652{
2653 struct xhci_virt_ep *ep;
2654 struct xhci_ring *ep_ring;
2655 unsigned int slot_id;
2656 int ep_index;
2657 struct xhci_td *td = NULL;
2658 dma_addr_t ep_trb_dma;
2659 struct xhci_segment *ep_seg;
2660 union xhci_trb *ep_trb;
2661 int status = -EINPROGRESS;
2662 struct xhci_ep_ctx *ep_ctx;
2663 u32 trb_comp_code;
2664
2665 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
2666 ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
2667 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2668 ep_trb_dma = le64_to_cpu(event->buffer);
2669
2670 ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
2671 if (!ep) {
2672 xhci_err(xhci, "ERROR Invalid Transfer event\n");
2673 goto err_out;
2674 }
2675
2676 ep_ring = xhci_dma_to_transfer_ring(ep, ep_trb_dma);
2677 ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
2678
2679 if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_DISABLED) {
2680 xhci_err(xhci,
2681 "ERROR Transfer event for disabled endpoint slot %u ep %u\n",
2682 slot_id, ep_index);
2683 goto err_out;
2684 }
2685
2686 if (!ep_ring)
2687 return handle_transferless_tx_event(xhci, ep, trb_comp_code);
2688
2689 /* Look for common error cases */
2690 switch (trb_comp_code) {
2691 /* Skip codes that require special handling depending on
2692 * transfer type
2693 */
2694 case COMP_SUCCESS:
2695 if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
2696 trb_comp_code = COMP_SHORT_PACKET;
2697 xhci_dbg(xhci, "Successful completion on short TX for slot %u ep %u with last td short %d\n",
2698 slot_id, ep_index, ep_ring->last_td_was_short);
2699 }
2700 break;
2701 case COMP_SHORT_PACKET:
2702 break;
2703 /* Completion codes for endpoint stopped state */
2704 case COMP_STOPPED:
2705 xhci_dbg(xhci, "Stopped on Transfer TRB for slot %u ep %u\n",
2706 slot_id, ep_index);
2707 break;
2708 case COMP_STOPPED_LENGTH_INVALID:
2709 xhci_dbg(xhci,
2710 "Stopped on No-op or Link TRB for slot %u ep %u\n",
2711 slot_id, ep_index);
2712 break;
2713 case COMP_STOPPED_SHORT_PACKET:
2714 xhci_dbg(xhci,
2715 "Stopped with short packet transfer detected for slot %u ep %u\n",
2716 slot_id, ep_index);
2717 break;
2718 /* Completion codes for endpoint halted state */
2719 case COMP_STALL_ERROR:
2720 xhci_dbg(xhci, "Stalled endpoint for slot %u ep %u\n", slot_id,
2721 ep_index);
2722 status = -EPIPE;
2723 break;
2724 case COMP_SPLIT_TRANSACTION_ERROR:
2725 xhci_dbg(xhci, "Split transaction error for slot %u ep %u\n",
2726 slot_id, ep_index);
2727 status = -EPROTO;
2728 break;
2729 case COMP_USB_TRANSACTION_ERROR:
2730 xhci_dbg(xhci, "Transfer error for slot %u ep %u on endpoint\n",
2731 slot_id, ep_index);
2732 status = -EPROTO;
2733 break;
2734 case COMP_BABBLE_DETECTED_ERROR:
2735 xhci_dbg(xhci, "Babble error for slot %u ep %u on endpoint\n",
2736 slot_id, ep_index);
2737 status = -EOVERFLOW;
2738 break;
2739 /* Completion codes for endpoint error state */
2740 case COMP_TRB_ERROR:
2741 xhci_warn(xhci,
2742 "WARN: TRB error for slot %u ep %u on endpoint\n",
2743 slot_id, ep_index);
2744 status = -EILSEQ;
2745 break;
2746 /* completion codes not indicating endpoint state change */
2747 case COMP_DATA_BUFFER_ERROR:
2748 xhci_warn(xhci,
2749 "WARN: HC couldn't access mem fast enough for slot %u ep %u\n",
2750 slot_id, ep_index);
2751 status = -ENOSR;
2752 break;
2753 case COMP_BANDWIDTH_OVERRUN_ERROR:
2754 xhci_warn(xhci,
2755 "WARN: bandwidth overrun event for slot %u ep %u on endpoint\n",
2756 slot_id, ep_index);
2757 break;
2758 case COMP_ISOCH_BUFFER_OVERRUN:
2759 xhci_warn(xhci,
2760 "WARN: buffer overrun event for slot %u ep %u on endpoint",
2761 slot_id, ep_index);
2762 break;
2763 case COMP_RING_UNDERRUN:
2764 /*
2765 * When the Isoch ring is empty, the xHC will generate
2766 * a Ring Overrun Event for IN Isoch endpoint or Ring
2767 * Underrun Event for OUT Isoch endpoint.
2768 */
2769 xhci_dbg(xhci, "Underrun event on slot %u ep %u\n", slot_id, ep_index);
2770 if (ep->skip)
2771 break;
2772 return 0;
2773 case COMP_RING_OVERRUN:
2774 xhci_dbg(xhci, "Overrun event on slot %u ep %u\n", slot_id, ep_index);
2775 if (ep->skip)
2776 break;
2777 return 0;
2778 case COMP_MISSED_SERVICE_ERROR:
2779 /*
2780 * When encounter missed service error, one or more isoc tds
2781 * may be missed by xHC.
2782 * Set skip flag of the ep_ring; Complete the missed tds as
2783 * short transfer when process the ep_ring next time.
2784 */
2785 ep->skip = true;
2786 xhci_dbg(xhci,
2787 "Miss service interval error for slot %u ep %u, set skip flag\n",
2788 slot_id, ep_index);
2789 return 0;
2790 case COMP_NO_PING_RESPONSE_ERROR:
2791 ep->skip = true;
2792 xhci_dbg(xhci,
2793 "No Ping response error for slot %u ep %u, Skip one Isoc TD\n",
2794 slot_id, ep_index);
2795 return 0;
2796
2797 case COMP_INCOMPATIBLE_DEVICE_ERROR:
2798 /* needs disable slot command to recover */
2799 xhci_warn(xhci,
2800 "WARN: detect an incompatible device for slot %u ep %u",
2801 slot_id, ep_index);
2802 status = -EPROTO;
2803 break;
2804 default:
2805 if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
2806 status = 0;
2807 break;
2808 }
2809 xhci_warn(xhci,
2810 "ERROR Unknown event condition %u for slot %u ep %u , HC probably busted\n",
2811 trb_comp_code, slot_id, ep_index);
2812 if (ep->skip)
2813 break;
2814 return 0;
2815 }
2816
2817 /*
2818 * xhci 4.10.2 states isoc endpoints should continue
2819 * processing the next TD if there was an error mid TD.
2820 * So host like NEC don't generate an event for the last
2821 * isoc TRB even if the IOC flag is set.
2822 * xhci 4.9.1 states that if there are errors in mult-TRB
2823 * TDs xHC should generate an error for that TRB, and if xHC
2824 * proceeds to the next TD it should genete an event for
2825 * any TRB with IOC flag on the way. Other host follow this.
2826 *
2827 * We wait for the final IOC event, but if we get an event
2828 * anywhere outside this TD, just give it back already.
2829 */
2830 td = list_first_entry_or_null(&ep_ring->td_list, struct xhci_td, td_list);
2831
2832 if (td && td->error_mid_td && !trb_in_td(xhci, td, ep_trb_dma, false)) {
2833 xhci_dbg(xhci, "Missing TD completion event after mid TD error\n");
2834 xhci_dequeue_td(xhci, td, ep_ring, td->status);
2835 }
2836
2837 if (list_empty(&ep_ring->td_list)) {
2838 /*
2839 * Don't print wanings if ring is empty due to a stopped endpoint generating an
2840 * extra completion event if the device was suspended. Or, a event for the last TRB
2841 * of a short TD we already got a short event for. The short TD is already removed
2842 * from the TD list.
2843 */
2844 if (trb_comp_code != COMP_STOPPED &&
2845 trb_comp_code != COMP_STOPPED_LENGTH_INVALID &&
2846 !ep_ring->last_td_was_short) {
2847 xhci_warn(xhci, "Event TRB for slot %u ep %u with no TDs queued\n",
2848 slot_id, ep_index);
2849 }
2850
2851 ep->skip = false;
2852 goto check_endpoint_halted;
2853 }
2854
2855 do {
2856 td = list_first_entry(&ep_ring->td_list, struct xhci_td,
2857 td_list);
2858
2859 /* Is this a TRB in the currently executing TD? */
2860 ep_seg = trb_in_td(xhci, td, ep_trb_dma, false);
2861
2862 if (!ep_seg) {
2863
2864 if (ep->skip && usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
2865 skip_isoc_td(xhci, td, ep, status);
2866 if (!list_empty(&ep_ring->td_list))
2867 continue;
2868
2869 xhci_dbg(xhci, "All TDs skipped for slot %u ep %u. Clear skip flag.\n",
2870 slot_id, ep_index);
2871 ep->skip = false;
2872 td = NULL;
2873 goto check_endpoint_halted;
2874 }
2875
2876 /*
2877 * Skip the Force Stopped Event. The 'ep_trb' of FSE is not in the current
2878 * TD pointed by 'ep_ring->dequeue' because that the hardware dequeue
2879 * pointer still at the previous TRB of the current TD. The previous TRB
2880 * maybe a Link TD or the last TRB of the previous TD. The command
2881 * completion handle will take care the rest.
2882 */
2883 if (trb_comp_code == COMP_STOPPED ||
2884 trb_comp_code == COMP_STOPPED_LENGTH_INVALID) {
2885 return 0;
2886 }
2887
2888 /*
2889 * Some hosts give a spurious success event after a short
2890 * transfer. Ignore it.
2891 */
2892 if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) &&
2893 ep_ring->last_td_was_short) {
2894 ep_ring->last_td_was_short = false;
2895 return 0;
2896 }
2897
2898 /* HC is busted, give up! */
2899 xhci_err(xhci,
2900 "ERROR Transfer event TRB DMA ptr not part of current TD ep_index %d comp_code %u\n",
2901 ep_index, trb_comp_code);
2902 trb_in_td(xhci, td, ep_trb_dma, true);
2903
2904 return -ESHUTDOWN;
2905 }
2906
2907 if (ep->skip) {
2908 xhci_dbg(xhci,
2909 "Found td. Clear skip flag for slot %u ep %u.\n",
2910 slot_id, ep_index);
2911 ep->skip = false;
2912 }
2913
2914 /*
2915 * If ep->skip is set, it means there are missed tds on the
2916 * endpoint ring need to take care of.
2917 * Process them as short transfer until reach the td pointed by
2918 * the event.
2919 */
2920 } while (ep->skip);
2921
2922 if (trb_comp_code == COMP_SHORT_PACKET)
2923 ep_ring->last_td_was_short = true;
2924 else
2925 ep_ring->last_td_was_short = false;
2926
2927 ep_trb = &ep_seg->trbs[(ep_trb_dma - ep_seg->dma) / sizeof(*ep_trb)];
2928 trace_xhci_handle_transfer(ep_ring, (struct xhci_generic_trb *) ep_trb, ep_trb_dma);
2929
2930 /*
2931 * No-op TRB could trigger interrupts in a case where a URB was killed
2932 * and a STALL_ERROR happens right after the endpoint ring stopped.
2933 * Reset the halted endpoint. Otherwise, the endpoint remains stalled
2934 * indefinitely.
2935 */
2936
2937 if (trb_is_noop(ep_trb))
2938 goto check_endpoint_halted;
2939
2940 td->status = status;
2941
2942 /* update the urb's actual_length and give back to the core */
2943 if (usb_endpoint_xfer_control(&td->urb->ep->desc))
2944 process_ctrl_td(xhci, ep, ep_ring, td, ep_trb, event);
2945 else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc))
2946 process_isoc_td(xhci, ep, ep_ring, td, ep_trb, event);
2947 else
2948 process_bulk_intr_td(xhci, ep, ep_ring, td, ep_trb, event);
2949 return 0;
2950
2951check_endpoint_halted:
2952 if (xhci_halted_host_endpoint(ep_ctx, trb_comp_code))
2953 xhci_handle_halted_endpoint(xhci, ep, td, EP_HARD_RESET);
2954
2955 return 0;
2956
2957err_out:
2958 xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
2959 (unsigned long long) xhci_trb_virt_to_dma(
2960 ir->event_ring->deq_seg,
2961 ir->event_ring->dequeue),
2962 lower_32_bits(le64_to_cpu(event->buffer)),
2963 upper_32_bits(le64_to_cpu(event->buffer)),
2964 le32_to_cpu(event->transfer_len),
2965 le32_to_cpu(event->flags));
2966 return -ENODEV;
2967}
2968
2969/*
2970 * This function handles one OS-owned event on the event ring. It may drop
2971 * xhci->lock between event processing (e.g. to pass up port status changes).
2972 */
2973static int xhci_handle_event_trb(struct xhci_hcd *xhci, struct xhci_interrupter *ir,
2974 union xhci_trb *event)
2975{
2976 u32 trb_type;
2977
2978 trace_xhci_handle_event(ir->event_ring, &event->generic,
2979 xhci_trb_virt_to_dma(ir->event_ring->deq_seg,
2980 ir->event_ring->dequeue));
2981
2982 /*
2983 * Barrier between reading the TRB_CYCLE (valid) flag before, and any
2984 * speculative reads of the event's flags/data below.
2985 */
2986 rmb();
2987 trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->event_cmd.flags));
2988 /* FIXME: Handle more event types. */
2989
2990 switch (trb_type) {
2991 case TRB_COMPLETION:
2992 handle_cmd_completion(xhci, &event->event_cmd);
2993 break;
2994 case TRB_PORT_STATUS:
2995 handle_port_status(xhci, event);
2996 break;
2997 case TRB_TRANSFER:
2998 handle_tx_event(xhci, ir, &event->trans_event);
2999 break;
3000 case TRB_DEV_NOTE:
3001 handle_device_notification(xhci, event);
3002 break;
3003 default:
3004 if (trb_type >= TRB_VENDOR_DEFINED_LOW)
3005 handle_vendor_event(xhci, event, trb_type);
3006 else
3007 xhci_warn(xhci, "ERROR unknown event type %d\n", trb_type);
3008 }
3009 /* Any of the above functions may drop and re-acquire the lock, so check
3010 * to make sure a watchdog timer didn't mark the host as non-responsive.
3011 */
3012 if (xhci->xhc_state & XHCI_STATE_DYING) {
3013 xhci_dbg(xhci, "xHCI host dying, returning from event handler.\n");
3014 return -ENODEV;
3015 }
3016
3017 return 0;
3018}
3019
3020/*
3021 * Update Event Ring Dequeue Pointer:
3022 * - When all events have finished
3023 * - To avoid "Event Ring Full Error" condition
3024 */
3025static void xhci_update_erst_dequeue(struct xhci_hcd *xhci,
3026 struct xhci_interrupter *ir,
3027 bool clear_ehb)
3028{
3029 u64 temp_64;
3030 dma_addr_t deq;
3031
3032 temp_64 = xhci_read_64(xhci, &ir->ir_set->erst_dequeue);
3033 deq = xhci_trb_virt_to_dma(ir->event_ring->deq_seg,
3034 ir->event_ring->dequeue);
3035 if (deq == 0)
3036 xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr\n");
3037 /*
3038 * Per 4.9.4, Software writes to the ERDP register shall always advance
3039 * the Event Ring Dequeue Pointer value.
3040 */
3041 if ((temp_64 & ERST_PTR_MASK) == (deq & ERST_PTR_MASK) && !clear_ehb)
3042 return;
3043
3044 /* Update HC event ring dequeue pointer */
3045 temp_64 = ir->event_ring->deq_seg->num & ERST_DESI_MASK;
3046 temp_64 |= deq & ERST_PTR_MASK;
3047
3048 /* Clear the event handler busy flag (RW1C) */
3049 if (clear_ehb)
3050 temp_64 |= ERST_EHB;
3051 xhci_write_64(xhci, temp_64, &ir->ir_set->erst_dequeue);
3052}
3053
3054/* Clear the interrupt pending bit for a specific interrupter. */
3055static void xhci_clear_interrupt_pending(struct xhci_interrupter *ir)
3056{
3057 if (!ir->ip_autoclear) {
3058 u32 irq_pending;
3059
3060 irq_pending = readl(&ir->ir_set->irq_pending);
3061 irq_pending |= IMAN_IP;
3062 writel(irq_pending, &ir->ir_set->irq_pending);
3063 }
3064}
3065
3066/*
3067 * Handle all OS-owned events on an interrupter event ring. It may drop
3068 * and reaquire xhci->lock between event processing.
3069 */
3070static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
3071{
3072 int event_loop = 0;
3073 int err;
3074 u64 temp;
3075
3076 xhci_clear_interrupt_pending(ir);
3077
3078 /* Event ring hasn't been allocated yet. */
3079 if (!ir->event_ring || !ir->event_ring->dequeue) {
3080 xhci_err(xhci, "ERROR interrupter event ring not ready\n");
3081 return -ENOMEM;
3082 }
3083
3084 if (xhci->xhc_state & XHCI_STATE_DYING ||
3085 xhci->xhc_state & XHCI_STATE_HALTED) {
3086 xhci_dbg(xhci, "xHCI dying, ignoring interrupt. Shouldn't IRQs be disabled?\n");
3087
3088 /* Clear the event handler busy flag (RW1C) */
3089 temp = xhci_read_64(xhci, &ir->ir_set->erst_dequeue);
3090 xhci_write_64(xhci, temp | ERST_EHB, &ir->ir_set->erst_dequeue);
3091 return -ENODEV;
3092 }
3093
3094 /* Process all OS owned event TRBs on this event ring */
3095 while (unhandled_event_trb(ir->event_ring)) {
3096 err = xhci_handle_event_trb(xhci, ir, ir->event_ring->dequeue);
3097
3098 /*
3099 * If half a segment of events have been handled in one go then
3100 * update ERDP, and force isoc trbs to interrupt more often
3101 */
3102 if (event_loop++ > TRBS_PER_SEGMENT / 2) {
3103 xhci_update_erst_dequeue(xhci, ir, false);
3104
3105 if (ir->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN)
3106 ir->isoc_bei_interval = ir->isoc_bei_interval / 2;
3107
3108 event_loop = 0;
3109 }
3110
3111 /* Update SW event ring dequeue pointer */
3112 inc_deq(xhci, ir->event_ring);
3113
3114 if (err)
3115 break;
3116 }
3117
3118 xhci_update_erst_dequeue(xhci, ir, true);
3119
3120 return 0;
3121}
3122
3123/*
3124 * xHCI spec says we can get an interrupt, and if the HC has an error condition,
3125 * we might get bad data out of the event ring. Section 4.10.2.7 has a list of
3126 * indicators of an event TRB error, but we check the status *first* to be safe.
3127 */
3128irqreturn_t xhci_irq(struct usb_hcd *hcd)
3129{
3130 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
3131 irqreturn_t ret = IRQ_HANDLED;
3132 u32 status;
3133
3134 spin_lock(&xhci->lock);
3135 /* Check if the xHC generated the interrupt, or the irq is shared */
3136 status = readl(&xhci->op_regs->status);
3137 if (status == ~(u32)0) {
3138 xhci_hc_died(xhci);
3139 goto out;
3140 }
3141
3142 if (!(status & STS_EINT)) {
3143 ret = IRQ_NONE;
3144 goto out;
3145 }
3146
3147 if (status & STS_HCE) {
3148 xhci_warn(xhci, "WARNING: Host Controller Error\n");
3149 goto out;
3150 }
3151
3152 if (status & STS_FATAL) {
3153 xhci_warn(xhci, "WARNING: Host System Error\n");
3154 xhci_halt(xhci);
3155 goto out;
3156 }
3157
3158 /*
3159 * Clear the op reg interrupt status first,
3160 * so we can receive interrupts from other MSI-X interrupters.
3161 * Write 1 to clear the interrupt status.
3162 */
3163 status |= STS_EINT;
3164 writel(status, &xhci->op_regs->status);
3165
3166 /* This is the handler of the primary interrupter */
3167 xhci_handle_events(xhci, xhci->interrupters[0]);
3168out:
3169 spin_unlock(&xhci->lock);
3170
3171 return ret;
3172}
3173
3174irqreturn_t xhci_msi_irq(int irq, void *hcd)
3175{
3176 return xhci_irq(hcd);
3177}
3178EXPORT_SYMBOL_GPL(xhci_msi_irq);
3179
3180/**** Endpoint Ring Operations ****/
3181
3182/*
3183 * Generic function for queueing a TRB on a ring.
3184 * The caller must have checked to make sure there's room on the ring.
3185 *
3186 * @more_trbs_coming: Will you enqueue more TRBs before calling
3187 * prepare_transfer()?
3188 */
3189static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
3190 bool more_trbs_coming,
3191 u32 field1, u32 field2, u32 field3, u32 field4)
3192{
3193 struct xhci_generic_trb *trb;
3194
3195 trb = &ring->enqueue->generic;
3196 trb->field[0] = cpu_to_le32(field1);
3197 trb->field[1] = cpu_to_le32(field2);
3198 trb->field[2] = cpu_to_le32(field3);
3199 /* make sure TRB is fully written before giving it to the controller */
3200 wmb();
3201 trb->field[3] = cpu_to_le32(field4);
3202
3203 trace_xhci_queue_trb(ring, trb,
3204 xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue));
3205
3206 inc_enq(xhci, ring, more_trbs_coming);
3207}
3208
3209/*
3210 * Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
3211 * expand ring if it start to be full.
3212 */
3213static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
3214 u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
3215{
3216 unsigned int link_trb_count = 0;
3217 unsigned int new_segs = 0;
3218
3219 /* Make sure the endpoint has been added to xHC schedule */
3220 switch (ep_state) {
3221 case EP_STATE_DISABLED:
3222 /*
3223 * USB core changed config/interfaces without notifying us,
3224 * or hardware is reporting the wrong state.
3225 */
3226 xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
3227 return -ENOENT;
3228 case EP_STATE_ERROR:
3229 xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
3230 /* FIXME event handling code for error needs to clear it */
3231 /* XXX not sure if this should be -ENOENT or not */
3232 return -EINVAL;
3233 case EP_STATE_HALTED:
3234 xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
3235 break;
3236 case EP_STATE_STOPPED:
3237 case EP_STATE_RUNNING:
3238 break;
3239 default:
3240 xhci_err(xhci, "ERROR unknown endpoint state for ep\n");
3241 /*
3242 * FIXME issue Configure Endpoint command to try to get the HC
3243 * back into a known state.
3244 */
3245 return -EINVAL;
3246 }
3247
3248 if (ep_ring != xhci->cmd_ring) {
3249 new_segs = xhci_ring_expansion_needed(xhci, ep_ring, num_trbs);
3250 } else if (xhci_num_trbs_free(ep_ring) <= num_trbs) {
3251 xhci_err(xhci, "Do not support expand command ring\n");
3252 return -ENOMEM;
3253 }
3254
3255 if (new_segs) {
3256 xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion,
3257 "ERROR no room on ep ring, try ring expansion");
3258 if (xhci_ring_expansion(xhci, ep_ring, new_segs, mem_flags)) {
3259 xhci_err(xhci, "Ring expansion failed\n");
3260 return -ENOMEM;
3261 }
3262 }
3263
3264 while (trb_is_link(ep_ring->enqueue)) {
3265 /* If we're not dealing with 0.95 hardware or isoc rings
3266 * on AMD 0.96 host, clear the chain bit.
3267 */
3268 if (!xhci_link_chain_quirk(xhci, ep_ring->type))
3269 ep_ring->enqueue->link.control &=
3270 cpu_to_le32(~TRB_CHAIN);
3271 else
3272 ep_ring->enqueue->link.control |=
3273 cpu_to_le32(TRB_CHAIN);
3274
3275 wmb();
3276 ep_ring->enqueue->link.control ^= cpu_to_le32(TRB_CYCLE);
3277
3278 /* Toggle the cycle bit after the last ring segment. */
3279 if (link_trb_toggles_cycle(ep_ring->enqueue))
3280 ep_ring->cycle_state ^= 1;
3281
3282 ep_ring->enq_seg = ep_ring->enq_seg->next;
3283 ep_ring->enqueue = ep_ring->enq_seg->trbs;
3284
3285 /* prevent infinite loop if all first trbs are link trbs */
3286 if (link_trb_count++ > ep_ring->num_segs) {
3287 xhci_warn(xhci, "Ring is an endless link TRB loop\n");
3288 return -EINVAL;
3289 }
3290 }
3291
3292 if (last_trb_on_seg(ep_ring->enq_seg, ep_ring->enqueue)) {
3293 xhci_warn(xhci, "Missing link TRB at end of ring segment\n");
3294 return -EINVAL;
3295 }
3296
3297 return 0;
3298}
3299
3300static int prepare_transfer(struct xhci_hcd *xhci,
3301 struct xhci_virt_device *xdev,
3302 unsigned int ep_index,
3303 unsigned int stream_id,
3304 unsigned int num_trbs,
3305 struct urb *urb,
3306 unsigned int td_index,
3307 gfp_t mem_flags)
3308{
3309 int ret;
3310 struct urb_priv *urb_priv;
3311 struct xhci_td *td;
3312 struct xhci_ring *ep_ring;
3313 struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
3314
3315 ep_ring = xhci_triad_to_transfer_ring(xhci, xdev->slot_id, ep_index,
3316 stream_id);
3317 if (!ep_ring) {
3318 xhci_dbg(xhci, "Can't prepare ring for bad stream ID %u\n",
3319 stream_id);
3320 return -EINVAL;
3321 }
3322
3323 ret = prepare_ring(xhci, ep_ring, GET_EP_CTX_STATE(ep_ctx),
3324 num_trbs, mem_flags);
3325 if (ret)
3326 return ret;
3327
3328 urb_priv = urb->hcpriv;
3329 td = &urb_priv->td[td_index];
3330
3331 INIT_LIST_HEAD(&td->td_list);
3332 INIT_LIST_HEAD(&td->cancelled_td_list);
3333
3334 if (td_index == 0) {
3335 ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb);
3336 if (unlikely(ret))
3337 return ret;
3338 }
3339
3340 td->urb = urb;
3341 /* Add this TD to the tail of the endpoint ring's TD list */
3342 list_add_tail(&td->td_list, &ep_ring->td_list);
3343 td->start_seg = ep_ring->enq_seg;
3344 td->start_trb = ep_ring->enqueue;
3345
3346 return 0;
3347}
3348
3349unsigned int count_trbs(u64 addr, u64 len)
3350{
3351 unsigned int num_trbs;
3352
3353 num_trbs = DIV_ROUND_UP(len + (addr & (TRB_MAX_BUFF_SIZE - 1)),
3354 TRB_MAX_BUFF_SIZE);
3355 if (num_trbs == 0)
3356 num_trbs++;
3357
3358 return num_trbs;
3359}
3360
3361static inline unsigned int count_trbs_needed(struct urb *urb)
3362{
3363 return count_trbs(urb->transfer_dma, urb->transfer_buffer_length);
3364}
3365
3366static unsigned int count_sg_trbs_needed(struct urb *urb)
3367{
3368 struct scatterlist *sg;
3369 unsigned int i, len, full_len, num_trbs = 0;
3370
3371 full_len = urb->transfer_buffer_length;
3372
3373 for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
3374 len = sg_dma_len(sg);
3375 num_trbs += count_trbs(sg_dma_address(sg), len);
3376 len = min_t(unsigned int, len, full_len);
3377 full_len -= len;
3378 if (full_len == 0)
3379 break;
3380 }
3381
3382 return num_trbs;
3383}
3384
3385static unsigned int count_isoc_trbs_needed(struct urb *urb, int i)
3386{
3387 u64 addr, len;
3388
3389 addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
3390 len = urb->iso_frame_desc[i].length;
3391
3392 return count_trbs(addr, len);
3393}
3394
3395static void check_trb_math(struct urb *urb, int running_total)
3396{
3397 if (unlikely(running_total != urb->transfer_buffer_length))
3398 dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
3399 "queued %#x (%d), asked for %#x (%d)\n",
3400 __func__,
3401 urb->ep->desc.bEndpointAddress,
3402 running_total, running_total,
3403 urb->transfer_buffer_length,
3404 urb->transfer_buffer_length);
3405}
3406
3407static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
3408 unsigned int ep_index, unsigned int stream_id, int start_cycle,
3409 struct xhci_generic_trb *start_trb)
3410{
3411 /*
3412 * Pass all the TRBs to the hardware at once and make sure this write
3413 * isn't reordered.
3414 */
3415 wmb();
3416 if (start_cycle)
3417 start_trb->field[3] |= cpu_to_le32(start_cycle);
3418 else
3419 start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
3420 xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
3421}
3422
3423static void check_interval(struct urb *urb, struct xhci_ep_ctx *ep_ctx)
3424{
3425 int xhci_interval;
3426 int ep_interval;
3427
3428 xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info));
3429 ep_interval = urb->interval;
3430
3431 /* Convert to microframes */
3432 if (urb->dev->speed == USB_SPEED_LOW ||
3433 urb->dev->speed == USB_SPEED_FULL)
3434 ep_interval *= 8;
3435
3436 /* FIXME change this to a warning and a suggestion to use the new API
3437 * to set the polling interval (once the API is added).
3438 */
3439 if (xhci_interval != ep_interval) {
3440 dev_dbg_ratelimited(&urb->dev->dev,
3441 "Driver uses different interval (%d microframe%s) than xHCI (%d microframe%s)\n",
3442 ep_interval, ep_interval == 1 ? "" : "s",
3443 xhci_interval, xhci_interval == 1 ? "" : "s");
3444 urb->interval = xhci_interval;
3445 /* Convert back to frames for LS/FS devices */
3446 if (urb->dev->speed == USB_SPEED_LOW ||
3447 urb->dev->speed == USB_SPEED_FULL)
3448 urb->interval /= 8;
3449 }
3450}
3451
3452/*
3453 * xHCI uses normal TRBs for both bulk and interrupt. When the interrupt
3454 * endpoint is to be serviced, the xHC will consume (at most) one TD. A TD
3455 * (comprised of sg list entries) can take several service intervals to
3456 * transmit.
3457 */
3458int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3459 struct urb *urb, int slot_id, unsigned int ep_index)
3460{
3461 struct xhci_ep_ctx *ep_ctx;
3462
3463 ep_ctx = xhci_get_ep_ctx(xhci, xhci->devs[slot_id]->out_ctx, ep_index);
3464 check_interval(urb, ep_ctx);
3465
3466 return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
3467}
3468
3469/*
3470 * For xHCI 1.0 host controllers, TD size is the number of max packet sized
3471 * packets remaining in the TD (*not* including this TRB).
3472 *
3473 * Total TD packet count = total_packet_count =
3474 * DIV_ROUND_UP(TD size in bytes / wMaxPacketSize)
3475 *
3476 * Packets transferred up to and including this TRB = packets_transferred =
3477 * rounddown(total bytes transferred including this TRB / wMaxPacketSize)
3478 *
3479 * TD size = total_packet_count - packets_transferred
3480 *
3481 * For xHCI 0.96 and older, TD size field should be the remaining bytes
3482 * including this TRB, right shifted by 10
3483 *
3484 * For all hosts it must fit in bits 21:17, so it can't be bigger than 31.
3485 * This is taken care of in the TRB_TD_SIZE() macro
3486 *
3487 * The last TRB in a TD must have the TD size set to zero.
3488 */
3489static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred,
3490 int trb_buff_len, unsigned int td_total_len,
3491 struct urb *urb, bool more_trbs_coming)
3492{
3493 u32 maxp, total_packet_count;
3494
3495 /* MTK xHCI 0.96 contains some features from 1.0 */
3496 if (xhci->hci_version < 0x100 && !(xhci->quirks & XHCI_MTK_HOST))
3497 return ((td_total_len - transferred) >> 10);
3498
3499 /* One TRB with a zero-length data packet. */
3500 if (!more_trbs_coming || (transferred == 0 && trb_buff_len == 0) ||
3501 trb_buff_len == td_total_len)
3502 return 0;
3503
3504 /* for MTK xHCI 0.96, TD size include this TRB, but not in 1.x */
3505 if ((xhci->quirks & XHCI_MTK_HOST) && (xhci->hci_version < 0x100))
3506 trb_buff_len = 0;
3507
3508 maxp = usb_endpoint_maxp(&urb->ep->desc);
3509 total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
3510
3511 /* Queueing functions don't count the current TRB into transferred */
3512 return (total_packet_count - ((transferred + trb_buff_len) / maxp));
3513}
3514
3515
3516static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len,
3517 u32 *trb_buff_len, struct xhci_segment *seg)
3518{
3519 struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
3520 unsigned int unalign;
3521 unsigned int max_pkt;
3522 u32 new_buff_len;
3523 size_t len;
3524
3525 max_pkt = usb_endpoint_maxp(&urb->ep->desc);
3526 unalign = (enqd_len + *trb_buff_len) % max_pkt;
3527
3528 /* we got lucky, last normal TRB data on segment is packet aligned */
3529 if (unalign == 0)
3530 return 0;
3531
3532 xhci_dbg(xhci, "Unaligned %d bytes, buff len %d\n",
3533 unalign, *trb_buff_len);
3534
3535 /* is the last nornal TRB alignable by splitting it */
3536 if (*trb_buff_len > unalign) {
3537 *trb_buff_len -= unalign;
3538 xhci_dbg(xhci, "split align, new buff len %d\n", *trb_buff_len);
3539 return 0;
3540 }
3541
3542 /*
3543 * We want enqd_len + trb_buff_len to sum up to a number aligned to
3544 * number which is divisible by the endpoint's wMaxPacketSize. IOW:
3545 * (size of currently enqueued TRBs + remainder) % wMaxPacketSize == 0.
3546 */
3547 new_buff_len = max_pkt - (enqd_len % max_pkt);
3548
3549 if (new_buff_len > (urb->transfer_buffer_length - enqd_len))
3550 new_buff_len = (urb->transfer_buffer_length - enqd_len);
3551
3552 /* create a max max_pkt sized bounce buffer pointed to by last trb */
3553 if (usb_urb_dir_out(urb)) {
3554 if (urb->num_sgs) {
3555 len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
3556 seg->bounce_buf, new_buff_len, enqd_len);
3557 if (len != new_buff_len)
3558 xhci_warn(xhci, "WARN Wrong bounce buffer write length: %zu != %d\n",
3559 len, new_buff_len);
3560 } else {
3561 memcpy(seg->bounce_buf, urb->transfer_buffer + enqd_len, new_buff_len);
3562 }
3563
3564 seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
3565 max_pkt, DMA_TO_DEVICE);
3566 } else {
3567 seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
3568 max_pkt, DMA_FROM_DEVICE);
3569 }
3570
3571 if (dma_mapping_error(dev, seg->bounce_dma)) {
3572 /* try without aligning. Some host controllers survive */
3573 xhci_warn(xhci, "Failed mapping bounce buffer, not aligning\n");
3574 return 0;
3575 }
3576 *trb_buff_len = new_buff_len;
3577 seg->bounce_len = new_buff_len;
3578 seg->bounce_offs = enqd_len;
3579
3580 xhci_dbg(xhci, "Bounce align, new buff len %d\n", *trb_buff_len);
3581
3582 return 1;
3583}
3584
3585/* This is very similar to what ehci-q.c qtd_fill() does */
3586int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3587 struct urb *urb, int slot_id, unsigned int ep_index)
3588{
3589 struct xhci_ring *ring;
3590 struct urb_priv *urb_priv;
3591 struct xhci_td *td;
3592 struct xhci_generic_trb *start_trb;
3593 struct scatterlist *sg = NULL;
3594 bool more_trbs_coming = true;
3595 bool need_zero_pkt = false;
3596 bool first_trb = true;
3597 unsigned int num_trbs;
3598 unsigned int start_cycle, num_sgs = 0;
3599 unsigned int enqd_len, block_len, trb_buff_len, full_len;
3600 int sent_len, ret;
3601 u32 field, length_field, remainder;
3602 u64 addr, send_addr;
3603
3604 ring = xhci_urb_to_transfer_ring(xhci, urb);
3605 if (!ring)
3606 return -EINVAL;
3607
3608 full_len = urb->transfer_buffer_length;
3609 /* If we have scatter/gather list, we use it. */
3610 if (urb->num_sgs && !(urb->transfer_flags & URB_DMA_MAP_SINGLE)) {
3611 num_sgs = urb->num_mapped_sgs;
3612 sg = urb->sg;
3613 addr = (u64) sg_dma_address(sg);
3614 block_len = sg_dma_len(sg);
3615 num_trbs = count_sg_trbs_needed(urb);
3616 } else {
3617 num_trbs = count_trbs_needed(urb);
3618 addr = (u64) urb->transfer_dma;
3619 block_len = full_len;
3620 }
3621 ret = prepare_transfer(xhci, xhci->devs[slot_id],
3622 ep_index, urb->stream_id,
3623 num_trbs, urb, 0, mem_flags);
3624 if (unlikely(ret < 0))
3625 return ret;
3626
3627 urb_priv = urb->hcpriv;
3628
3629 /* Deal with URB_ZERO_PACKET - need one more td/trb */
3630 if (urb->transfer_flags & URB_ZERO_PACKET && urb_priv->num_tds > 1)
3631 need_zero_pkt = true;
3632
3633 td = &urb_priv->td[0];
3634
3635 /*
3636 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3637 * until we've finished creating all the other TRBs. The ring's cycle
3638 * state may change as we enqueue the other TRBs, so save it too.
3639 */
3640 start_trb = &ring->enqueue->generic;
3641 start_cycle = ring->cycle_state;
3642 send_addr = addr;
3643
3644 /* Queue the TRBs, even if they are zero-length */
3645 for (enqd_len = 0; first_trb || enqd_len < full_len;
3646 enqd_len += trb_buff_len) {
3647 field = TRB_TYPE(TRB_NORMAL);
3648
3649 /* TRB buffer should not cross 64KB boundaries */
3650 trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
3651 trb_buff_len = min_t(unsigned int, trb_buff_len, block_len);
3652
3653 if (enqd_len + trb_buff_len > full_len)
3654 trb_buff_len = full_len - enqd_len;
3655
3656 /* Don't change the cycle bit of the first TRB until later */
3657 if (first_trb) {
3658 first_trb = false;
3659 if (start_cycle == 0)
3660 field |= TRB_CYCLE;
3661 } else
3662 field |= ring->cycle_state;
3663
3664 /* Chain all the TRBs together; clear the chain bit in the last
3665 * TRB to indicate it's the last TRB in the chain.
3666 */
3667 if (enqd_len + trb_buff_len < full_len) {
3668 field |= TRB_CHAIN;
3669 if (trb_is_link(ring->enqueue + 1)) {
3670 if (xhci_align_td(xhci, urb, enqd_len,
3671 &trb_buff_len,
3672 ring->enq_seg)) {
3673 send_addr = ring->enq_seg->bounce_dma;
3674 /* assuming TD won't span 2 segs */
3675 td->bounce_seg = ring->enq_seg;
3676 }
3677 }
3678 }
3679 if (enqd_len + trb_buff_len >= full_len) {
3680 field &= ~TRB_CHAIN;
3681 field |= TRB_IOC;
3682 more_trbs_coming = false;
3683 td->end_trb = ring->enqueue;
3684 td->end_seg = ring->enq_seg;
3685 if (xhci_urb_suitable_for_idt(urb)) {
3686 memcpy(&send_addr, urb->transfer_buffer,
3687 trb_buff_len);
3688 le64_to_cpus(&send_addr);
3689 field |= TRB_IDT;
3690 }
3691 }
3692
3693 /* Only set interrupt on short packet for IN endpoints */
3694 if (usb_urb_dir_in(urb))
3695 field |= TRB_ISP;
3696
3697 /* Set the TRB length, TD size, and interrupter fields. */
3698 remainder = xhci_td_remainder(xhci, enqd_len, trb_buff_len,
3699 full_len, urb, more_trbs_coming);
3700
3701 length_field = TRB_LEN(trb_buff_len) |
3702 TRB_TD_SIZE(remainder) |
3703 TRB_INTR_TARGET(0);
3704
3705 queue_trb(xhci, ring, more_trbs_coming | need_zero_pkt,
3706 lower_32_bits(send_addr),
3707 upper_32_bits(send_addr),
3708 length_field,
3709 field);
3710 addr += trb_buff_len;
3711 sent_len = trb_buff_len;
3712
3713 while (sg && sent_len >= block_len) {
3714 /* New sg entry */
3715 --num_sgs;
3716 sent_len -= block_len;
3717 sg = sg_next(sg);
3718 if (num_sgs != 0 && sg) {
3719 block_len = sg_dma_len(sg);
3720 addr = (u64) sg_dma_address(sg);
3721 addr += sent_len;
3722 }
3723 }
3724 block_len -= sent_len;
3725 send_addr = addr;
3726 }
3727
3728 if (need_zero_pkt) {
3729 ret = prepare_transfer(xhci, xhci->devs[slot_id],
3730 ep_index, urb->stream_id,
3731 1, urb, 1, mem_flags);
3732 urb_priv->td[1].end_trb = ring->enqueue;
3733 urb_priv->td[1].end_seg = ring->enq_seg;
3734 field = TRB_TYPE(TRB_NORMAL) | ring->cycle_state | TRB_IOC;
3735 queue_trb(xhci, ring, 0, 0, 0, TRB_INTR_TARGET(0), field);
3736 }
3737
3738 check_trb_math(urb, enqd_len);
3739 giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
3740 start_cycle, start_trb);
3741 return 0;
3742}
3743
3744/* Caller must have locked xhci->lock */
3745int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3746 struct urb *urb, int slot_id, unsigned int ep_index)
3747{
3748 struct xhci_ring *ep_ring;
3749 int num_trbs;
3750 int ret;
3751 struct usb_ctrlrequest *setup;
3752 struct xhci_generic_trb *start_trb;
3753 int start_cycle;
3754 u32 field;
3755 struct urb_priv *urb_priv;
3756 struct xhci_td *td;
3757
3758 ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
3759 if (!ep_ring)
3760 return -EINVAL;
3761
3762 /*
3763 * Need to copy setup packet into setup TRB, so we can't use the setup
3764 * DMA address.
3765 */
3766 if (!urb->setup_packet)
3767 return -EINVAL;
3768
3769 if ((xhci->quirks & XHCI_ETRON_HOST) &&
3770 urb->dev->speed >= USB_SPEED_SUPER) {
3771 /*
3772 * If next available TRB is the Link TRB in the ring segment then
3773 * enqueue a No Op TRB, this can prevent the Setup and Data Stage
3774 * TRB to be breaked by the Link TRB.
3775 */
3776 if (trb_is_link(ep_ring->enqueue + 1)) {
3777 field = TRB_TYPE(TRB_TR_NOOP) | ep_ring->cycle_state;
3778 queue_trb(xhci, ep_ring, false, 0, 0,
3779 TRB_INTR_TARGET(0), field);
3780 }
3781 }
3782
3783 /* 1 TRB for setup, 1 for status */
3784 num_trbs = 2;
3785 /*
3786 * Don't need to check if we need additional event data and normal TRBs,
3787 * since data in control transfers will never get bigger than 16MB
3788 * XXX: can we get a buffer that crosses 64KB boundaries?
3789 */
3790 if (urb->transfer_buffer_length > 0)
3791 num_trbs++;
3792 ret = prepare_transfer(xhci, xhci->devs[slot_id],
3793 ep_index, urb->stream_id,
3794 num_trbs, urb, 0, mem_flags);
3795 if (ret < 0)
3796 return ret;
3797
3798 urb_priv = urb->hcpriv;
3799 td = &urb_priv->td[0];
3800
3801 /*
3802 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3803 * until we've finished creating all the other TRBs. The ring's cycle
3804 * state may change as we enqueue the other TRBs, so save it too.
3805 */
3806 start_trb = &ep_ring->enqueue->generic;
3807 start_cycle = ep_ring->cycle_state;
3808
3809 /* Queue setup TRB - see section 6.4.1.2.1 */
3810 /* FIXME better way to translate setup_packet into two u32 fields? */
3811 setup = (struct usb_ctrlrequest *) urb->setup_packet;
3812 field = 0;
3813 field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
3814 if (start_cycle == 0)
3815 field |= 0x1;
3816
3817 /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
3818 if ((xhci->hci_version >= 0x100) || (xhci->quirks & XHCI_MTK_HOST)) {
3819 if (urb->transfer_buffer_length > 0) {
3820 if (setup->bRequestType & USB_DIR_IN)
3821 field |= TRB_TX_TYPE(TRB_DATA_IN);
3822 else
3823 field |= TRB_TX_TYPE(TRB_DATA_OUT);
3824 }
3825 }
3826
3827 queue_trb(xhci, ep_ring, true,
3828 setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16,
3829 le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16,
3830 TRB_LEN(8) | TRB_INTR_TARGET(0),
3831 /* Immediate data in pointer */
3832 field);
3833
3834 /* If there's data, queue data TRBs */
3835 /* Only set interrupt on short packet for IN endpoints */
3836 if (usb_urb_dir_in(urb))
3837 field = TRB_ISP | TRB_TYPE(TRB_DATA);
3838 else
3839 field = TRB_TYPE(TRB_DATA);
3840
3841 if (urb->transfer_buffer_length > 0) {
3842 u32 length_field, remainder;
3843 u64 addr;
3844
3845 if (xhci_urb_suitable_for_idt(urb)) {
3846 memcpy(&addr, urb->transfer_buffer,
3847 urb->transfer_buffer_length);
3848 le64_to_cpus(&addr);
3849 field |= TRB_IDT;
3850 } else {
3851 addr = (u64) urb->transfer_dma;
3852 }
3853
3854 remainder = xhci_td_remainder(xhci, 0,
3855 urb->transfer_buffer_length,
3856 urb->transfer_buffer_length,
3857 urb, 1);
3858 length_field = TRB_LEN(urb->transfer_buffer_length) |
3859 TRB_TD_SIZE(remainder) |
3860 TRB_INTR_TARGET(0);
3861 if (setup->bRequestType & USB_DIR_IN)
3862 field |= TRB_DIR_IN;
3863 queue_trb(xhci, ep_ring, true,
3864 lower_32_bits(addr),
3865 upper_32_bits(addr),
3866 length_field,
3867 field | ep_ring->cycle_state);
3868 }
3869
3870 /* Save the DMA address of the last TRB in the TD */
3871 td->end_trb = ep_ring->enqueue;
3872 td->end_seg = ep_ring->enq_seg;
3873
3874 /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
3875 /* If the device sent data, the status stage is an OUT transfer */
3876 if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN)
3877 field = 0;
3878 else
3879 field = TRB_DIR_IN;
3880 queue_trb(xhci, ep_ring, false,
3881 0,
3882 0,
3883 TRB_INTR_TARGET(0),
3884 /* Event on completion */
3885 field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
3886
3887 giveback_first_trb(xhci, slot_id, ep_index, 0,
3888 start_cycle, start_trb);
3889 return 0;
3890}
3891
3892/*
3893 * The transfer burst count field of the isochronous TRB defines the number of
3894 * bursts that are required to move all packets in this TD. Only SuperSpeed
3895 * devices can burst up to bMaxBurst number of packets per service interval.
3896 * This field is zero based, meaning a value of zero in the field means one
3897 * burst. Basically, for everything but SuperSpeed devices, this field will be
3898 * zero. Only xHCI 1.0 host controllers support this field.
3899 */
3900static unsigned int xhci_get_burst_count(struct xhci_hcd *xhci,
3901 struct urb *urb, unsigned int total_packet_count)
3902{
3903 unsigned int max_burst;
3904
3905 if (xhci->hci_version < 0x100 || urb->dev->speed < USB_SPEED_SUPER)
3906 return 0;
3907
3908 max_burst = urb->ep->ss_ep_comp.bMaxBurst;
3909 return DIV_ROUND_UP(total_packet_count, max_burst + 1) - 1;
3910}
3911
3912/*
3913 * Returns the number of packets in the last "burst" of packets. This field is
3914 * valid for all speeds of devices. USB 2.0 devices can only do one "burst", so
3915 * the last burst packet count is equal to the total number of packets in the
3916 * TD. SuperSpeed endpoints can have up to 3 bursts. All but the last burst
3917 * must contain (bMaxBurst + 1) number of packets, but the last burst can
3918 * contain 1 to (bMaxBurst + 1) packets.
3919 */
3920static unsigned int xhci_get_last_burst_packet_count(struct xhci_hcd *xhci,
3921 struct urb *urb, unsigned int total_packet_count)
3922{
3923 unsigned int max_burst;
3924 unsigned int residue;
3925
3926 if (xhci->hci_version < 0x100)
3927 return 0;
3928
3929 if (urb->dev->speed >= USB_SPEED_SUPER) {
3930 /* bMaxBurst is zero based: 0 means 1 packet per burst */
3931 max_burst = urb->ep->ss_ep_comp.bMaxBurst;
3932 residue = total_packet_count % (max_burst + 1);
3933 /* If residue is zero, the last burst contains (max_burst + 1)
3934 * number of packets, but the TLBPC field is zero-based.
3935 */
3936 if (residue == 0)
3937 return max_burst;
3938 return residue - 1;
3939 }
3940 if (total_packet_count == 0)
3941 return 0;
3942 return total_packet_count - 1;
3943}
3944
3945/*
3946 * Calculates Frame ID field of the isochronous TRB identifies the
3947 * target frame that the Interval associated with this Isochronous
3948 * Transfer Descriptor will start on. Refer to 4.11.2.5 in 1.1 spec.
3949 *
3950 * Returns actual frame id on success, negative value on error.
3951 */
3952static int xhci_get_isoc_frame_id(struct xhci_hcd *xhci,
3953 struct urb *urb, int index)
3954{
3955 int start_frame, ist, ret = 0;
3956 int start_frame_id, end_frame_id, current_frame_id;
3957
3958 if (urb->dev->speed == USB_SPEED_LOW ||
3959 urb->dev->speed == USB_SPEED_FULL)
3960 start_frame = urb->start_frame + index * urb->interval;
3961 else
3962 start_frame = (urb->start_frame + index * urb->interval) >> 3;
3963
3964 /* Isochronous Scheduling Threshold (IST, bits 0~3 in HCSPARAMS2):
3965 *
3966 * If bit [3] of IST is cleared to '0', software can add a TRB no
3967 * later than IST[2:0] Microframes before that TRB is scheduled to
3968 * be executed.
3969 * If bit [3] of IST is set to '1', software can add a TRB no later
3970 * than IST[2:0] Frames before that TRB is scheduled to be executed.
3971 */
3972 ist = HCS_IST(xhci->hcs_params2) & 0x7;
3973 if (HCS_IST(xhci->hcs_params2) & (1 << 3))
3974 ist <<= 3;
3975
3976 /* Software shall not schedule an Isoch TD with a Frame ID value that
3977 * is less than the Start Frame ID or greater than the End Frame ID,
3978 * where:
3979 *
3980 * End Frame ID = (Current MFINDEX register value + 895 ms.) MOD 2048
3981 * Start Frame ID = (Current MFINDEX register value + IST + 1) MOD 2048
3982 *
3983 * Both the End Frame ID and Start Frame ID values are calculated
3984 * in microframes. When software determines the valid Frame ID value;
3985 * The End Frame ID value should be rounded down to the nearest Frame
3986 * boundary, and the Start Frame ID value should be rounded up to the
3987 * nearest Frame boundary.
3988 */
3989 current_frame_id = readl(&xhci->run_regs->microframe_index);
3990 start_frame_id = roundup(current_frame_id + ist + 1, 8);
3991 end_frame_id = rounddown(current_frame_id + 895 * 8, 8);
3992
3993 start_frame &= 0x7ff;
3994 start_frame_id = (start_frame_id >> 3) & 0x7ff;
3995 end_frame_id = (end_frame_id >> 3) & 0x7ff;
3996
3997 if (start_frame_id < end_frame_id) {
3998 if (start_frame > end_frame_id ||
3999 start_frame < start_frame_id)
4000 ret = -EINVAL;
4001 } else if (start_frame_id > end_frame_id) {
4002 if ((start_frame > end_frame_id &&
4003 start_frame < start_frame_id))
4004 ret = -EINVAL;
4005 } else {
4006 ret = -EINVAL;
4007 }
4008
4009 if (index == 0) {
4010 if (ret == -EINVAL || start_frame == start_frame_id) {
4011 start_frame = start_frame_id + 1;
4012 if (urb->dev->speed == USB_SPEED_LOW ||
4013 urb->dev->speed == USB_SPEED_FULL)
4014 urb->start_frame = start_frame;
4015 else
4016 urb->start_frame = start_frame << 3;
4017 ret = 0;
4018 }
4019 }
4020
4021 if (ret) {
4022 xhci_warn(xhci, "Frame ID %d (reg %d, index %d) beyond range (%d, %d)\n",
4023 start_frame, current_frame_id, index,
4024 start_frame_id, end_frame_id);
4025 xhci_warn(xhci, "Ignore frame ID field, use SIA bit instead\n");
4026 return ret;
4027 }
4028
4029 return start_frame;
4030}
4031
4032/* Check if we should generate event interrupt for a TD in an isoc URB */
4033static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i,
4034 struct xhci_interrupter *ir)
4035{
4036 if (xhci->hci_version < 0x100)
4037 return false;
4038 /* always generate an event interrupt for the last TD */
4039 if (i == num_tds - 1)
4040 return false;
4041 /*
4042 * If AVOID_BEI is set the host handles full event rings poorly,
4043 * generate an event at least every 8th TD to clear the event ring
4044 */
4045 if (i && ir->isoc_bei_interval && xhci->quirks & XHCI_AVOID_BEI)
4046 return !!(i % ir->isoc_bei_interval);
4047
4048 return true;
4049}
4050
4051/* This is for isoc transfer */
4052static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
4053 struct urb *urb, int slot_id, unsigned int ep_index)
4054{
4055 struct xhci_interrupter *ir;
4056 struct xhci_ring *ep_ring;
4057 struct urb_priv *urb_priv;
4058 struct xhci_td *td;
4059 int num_tds, trbs_per_td;
4060 struct xhci_generic_trb *start_trb;
4061 bool first_trb;
4062 int start_cycle;
4063 u32 field, length_field;
4064 int running_total, trb_buff_len, td_len, td_remain_len, ret;
4065 u64 start_addr, addr;
4066 int i, j;
4067 bool more_trbs_coming;
4068 struct xhci_virt_ep *xep;
4069 int frame_id;
4070
4071 xep = &xhci->devs[slot_id]->eps[ep_index];
4072 ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
4073 ir = xhci->interrupters[0];
4074
4075 num_tds = urb->number_of_packets;
4076 if (num_tds < 1) {
4077 xhci_dbg(xhci, "Isoc URB with zero packets?\n");
4078 return -EINVAL;
4079 }
4080 start_addr = (u64) urb->transfer_dma;
4081 start_trb = &ep_ring->enqueue->generic;
4082 start_cycle = ep_ring->cycle_state;
4083
4084 urb_priv = urb->hcpriv;
4085 /* Queue the TRBs for each TD, even if they are zero-length */
4086 for (i = 0; i < num_tds; i++) {
4087 unsigned int total_pkt_count, max_pkt;
4088 unsigned int burst_count, last_burst_pkt_count;
4089 u32 sia_frame_id;
4090
4091 first_trb = true;
4092 running_total = 0;
4093 addr = start_addr + urb->iso_frame_desc[i].offset;
4094 td_len = urb->iso_frame_desc[i].length;
4095 td_remain_len = td_len;
4096 max_pkt = usb_endpoint_maxp(&urb->ep->desc);
4097 total_pkt_count = DIV_ROUND_UP(td_len, max_pkt);
4098
4099 /* A zero-length transfer still involves at least one packet. */
4100 if (total_pkt_count == 0)
4101 total_pkt_count++;
4102 burst_count = xhci_get_burst_count(xhci, urb, total_pkt_count);
4103 last_burst_pkt_count = xhci_get_last_burst_packet_count(xhci,
4104 urb, total_pkt_count);
4105
4106 trbs_per_td = count_isoc_trbs_needed(urb, i);
4107
4108 ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
4109 urb->stream_id, trbs_per_td, urb, i, mem_flags);
4110 if (ret < 0) {
4111 if (i == 0)
4112 return ret;
4113 goto cleanup;
4114 }
4115 td = &urb_priv->td[i];
4116 /* use SIA as default, if frame id is used overwrite it */
4117 sia_frame_id = TRB_SIA;
4118 if (!(urb->transfer_flags & URB_ISO_ASAP) &&
4119 HCC_CFC(xhci->hcc_params)) {
4120 frame_id = xhci_get_isoc_frame_id(xhci, urb, i);
4121 if (frame_id >= 0)
4122 sia_frame_id = TRB_FRAME_ID(frame_id);
4123 }
4124 /*
4125 * Set isoc specific data for the first TRB in a TD.
4126 * Prevent HW from getting the TRBs by keeping the cycle state
4127 * inverted in the first TDs isoc TRB.
4128 */
4129 field = TRB_TYPE(TRB_ISOC) |
4130 TRB_TLBPC(last_burst_pkt_count) |
4131 sia_frame_id |
4132 (i ? ep_ring->cycle_state : !start_cycle);
4133
4134 /* xhci 1.1 with ETE uses TD_Size field for TBC, old is Rsvdz */
4135 if (!xep->use_extended_tbc)
4136 field |= TRB_TBC(burst_count);
4137
4138 /* fill the rest of the TRB fields, and remaining normal TRBs */
4139 for (j = 0; j < trbs_per_td; j++) {
4140 u32 remainder = 0;
4141
4142 /* only first TRB is isoc, overwrite otherwise */
4143 if (!first_trb)
4144 field = TRB_TYPE(TRB_NORMAL) |
4145 ep_ring->cycle_state;
4146
4147 /* Only set interrupt on short packet for IN EPs */
4148 if (usb_urb_dir_in(urb))
4149 field |= TRB_ISP;
4150
4151 /* Set the chain bit for all except the last TRB */
4152 if (j < trbs_per_td - 1) {
4153 more_trbs_coming = true;
4154 field |= TRB_CHAIN;
4155 } else {
4156 more_trbs_coming = false;
4157 td->end_trb = ep_ring->enqueue;
4158 td->end_seg = ep_ring->enq_seg;
4159 field |= TRB_IOC;
4160 if (trb_block_event_intr(xhci, num_tds, i, ir))
4161 field |= TRB_BEI;
4162 }
4163 /* Calculate TRB length */
4164 trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
4165 if (trb_buff_len > td_remain_len)
4166 trb_buff_len = td_remain_len;
4167
4168 /* Set the TRB length, TD size, & interrupter fields. */
4169 remainder = xhci_td_remainder(xhci, running_total,
4170 trb_buff_len, td_len,
4171 urb, more_trbs_coming);
4172
4173 length_field = TRB_LEN(trb_buff_len) |
4174 TRB_INTR_TARGET(0);
4175
4176 /* xhci 1.1 with ETE uses TD Size field for TBC */
4177 if (first_trb && xep->use_extended_tbc)
4178 length_field |= TRB_TD_SIZE_TBC(burst_count);
4179 else
4180 length_field |= TRB_TD_SIZE(remainder);
4181 first_trb = false;
4182
4183 queue_trb(xhci, ep_ring, more_trbs_coming,
4184 lower_32_bits(addr),
4185 upper_32_bits(addr),
4186 length_field,
4187 field);
4188 running_total += trb_buff_len;
4189
4190 addr += trb_buff_len;
4191 td_remain_len -= trb_buff_len;
4192 }
4193
4194 /* Check TD length */
4195 if (running_total != td_len) {
4196 xhci_err(xhci, "ISOC TD length unmatch\n");
4197 ret = -EINVAL;
4198 goto cleanup;
4199 }
4200 }
4201
4202 /* store the next frame id */
4203 if (HCC_CFC(xhci->hcc_params))
4204 xep->next_frame_id = urb->start_frame + num_tds * urb->interval;
4205
4206 if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
4207 if (xhci->quirks & XHCI_AMD_PLL_FIX)
4208 usb_amd_quirk_pll_disable();
4209 }
4210 xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++;
4211
4212 giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
4213 start_cycle, start_trb);
4214 return 0;
4215cleanup:
4216 /* Clean up a partially enqueued isoc transfer. */
4217
4218 for (i--; i >= 0; i--)
4219 list_del_init(&urb_priv->td[i].td_list);
4220
4221 /* Use the first TD as a temporary variable to turn the TDs we've queued
4222 * into No-ops with a software-owned cycle bit. That way the hardware
4223 * won't accidentally start executing bogus TDs when we partially
4224 * overwrite them. td->start_trb and td->start_seg are already set.
4225 */
4226 urb_priv->td[0].end_trb = ep_ring->enqueue;
4227 /* Every TRB except the first & last will have its cycle bit flipped. */
4228 td_to_noop(&urb_priv->td[0], true);
4229
4230 /* Reset the ring enqueue back to the first TRB and its cycle bit. */
4231 ep_ring->enqueue = urb_priv->td[0].start_trb;
4232 ep_ring->enq_seg = urb_priv->td[0].start_seg;
4233 ep_ring->cycle_state = start_cycle;
4234 usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
4235 return ret;
4236}
4237
4238/*
4239 * Check transfer ring to guarantee there is enough room for the urb.
4240 * Update ISO URB start_frame and interval.
4241 * Update interval as xhci_queue_intr_tx does. Use xhci frame_index to
4242 * update urb->start_frame if URB_ISO_ASAP is set in transfer_flags or
4243 * Contiguous Frame ID is not supported by HC.
4244 */
4245int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
4246 struct urb *urb, int slot_id, unsigned int ep_index)
4247{
4248 struct xhci_virt_device *xdev;
4249 struct xhci_ring *ep_ring;
4250 struct xhci_ep_ctx *ep_ctx;
4251 int start_frame;
4252 int num_tds, num_trbs, i;
4253 int ret;
4254 struct xhci_virt_ep *xep;
4255 int ist;
4256
4257 xdev = xhci->devs[slot_id];
4258 xep = &xhci->devs[slot_id]->eps[ep_index];
4259 ep_ring = xdev->eps[ep_index].ring;
4260 ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
4261
4262 num_trbs = 0;
4263 num_tds = urb->number_of_packets;
4264 for (i = 0; i < num_tds; i++)
4265 num_trbs += count_isoc_trbs_needed(urb, i);
4266
4267 /* Check the ring to guarantee there is enough room for the whole urb.
4268 * Do not insert any td of the urb to the ring if the check failed.
4269 */
4270 ret = prepare_ring(xhci, ep_ring, GET_EP_CTX_STATE(ep_ctx),
4271 num_trbs, mem_flags);
4272 if (ret)
4273 return ret;
4274
4275 /*
4276 * Check interval value. This should be done before we start to
4277 * calculate the start frame value.
4278 */
4279 check_interval(urb, ep_ctx);
4280
4281 /* Calculate the start frame and put it in urb->start_frame. */
4282 if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) {
4283 if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_RUNNING) {
4284 urb->start_frame = xep->next_frame_id;
4285 goto skip_start_over;
4286 }
4287 }
4288
4289 start_frame = readl(&xhci->run_regs->microframe_index);
4290 start_frame &= 0x3fff;
4291 /*
4292 * Round up to the next frame and consider the time before trb really
4293 * gets scheduled by hardare.
4294 */
4295 ist = HCS_IST(xhci->hcs_params2) & 0x7;
4296 if (HCS_IST(xhci->hcs_params2) & (1 << 3))
4297 ist <<= 3;
4298 start_frame += ist + XHCI_CFC_DELAY;
4299 start_frame = roundup(start_frame, 8);
4300
4301 /*
4302 * Round up to the next ESIT (Endpoint Service Interval Time) if ESIT
4303 * is greate than 8 microframes.
4304 */
4305 if (urb->dev->speed == USB_SPEED_LOW ||
4306 urb->dev->speed == USB_SPEED_FULL) {
4307 start_frame = roundup(start_frame, urb->interval << 3);
4308 urb->start_frame = start_frame >> 3;
4309 } else {
4310 start_frame = roundup(start_frame, urb->interval);
4311 urb->start_frame = start_frame;
4312 }
4313
4314skip_start_over:
4315
4316 return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
4317}
4318
4319/**** Command Ring Operations ****/
4320
4321/* Generic function for queueing a command TRB on the command ring.
4322 * Check to make sure there's room on the command ring for one command TRB.
4323 * Also check that there's room reserved for commands that must not fail.
4324 * If this is a command that must not fail, meaning command_must_succeed = TRUE,
4325 * then only check for the number of reserved spots.
4326 * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB
4327 * because the command event handler may want to resubmit a failed command.
4328 */
4329static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
4330 u32 field1, u32 field2,
4331 u32 field3, u32 field4, bool command_must_succeed)
4332{
4333 int reserved_trbs = xhci->cmd_ring_reserved_trbs;
4334 int ret;
4335
4336 if ((xhci->xhc_state & XHCI_STATE_DYING) ||
4337 (xhci->xhc_state & XHCI_STATE_HALTED)) {
4338 xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
4339 return -ESHUTDOWN;
4340 }
4341
4342 if (!command_must_succeed)
4343 reserved_trbs++;
4344
4345 ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
4346 reserved_trbs, GFP_ATOMIC);
4347 if (ret < 0) {
4348 xhci_err(xhci, "ERR: No room for command on command ring\n");
4349 if (command_must_succeed)
4350 xhci_err(xhci, "ERR: Reserved TRB counting for "
4351 "unfailable commands failed.\n");
4352 return ret;
4353 }
4354
4355 cmd->command_trb = xhci->cmd_ring->enqueue;
4356
4357 /* if there are no other commands queued we start the timeout timer */
4358 if (list_empty(&xhci->cmd_list)) {
4359 xhci->current_cmd = cmd;
4360 xhci_mod_cmd_timer(xhci);
4361 }
4362
4363 list_add_tail(&cmd->cmd_list, &xhci->cmd_list);
4364
4365 queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
4366 field4 | xhci->cmd_ring->cycle_state);
4367 return 0;
4368}
4369
4370/* Queue a slot enable or disable request on the command ring */
4371int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd,
4372 u32 trb_type, u32 slot_id)
4373{
4374 return queue_command(xhci, cmd, 0, 0, 0,
4375 TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false);
4376}
4377
4378/* Queue an address device command TRB */
4379int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
4380 dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev setup)
4381{
4382 return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
4383 upper_32_bits(in_ctx_ptr), 0,
4384 TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id)
4385 | (setup == SETUP_CONTEXT_ONLY ? TRB_BSR : 0), false);
4386}
4387
4388int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
4389 u32 field1, u32 field2, u32 field3, u32 field4)
4390{
4391 return queue_command(xhci, cmd, field1, field2, field3, field4, false);
4392}
4393
4394/* Queue a reset device command TRB */
4395int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
4396 u32 slot_id)
4397{
4398 return queue_command(xhci, cmd, 0, 0, 0,
4399 TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id),
4400 false);
4401}
4402
4403/* Queue a configure endpoint command TRB */
4404int xhci_queue_configure_endpoint(struct xhci_hcd *xhci,
4405 struct xhci_command *cmd, dma_addr_t in_ctx_ptr,
4406 u32 slot_id, bool command_must_succeed)
4407{
4408 return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
4409 upper_32_bits(in_ctx_ptr), 0,
4410 TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id),
4411 command_must_succeed);
4412}
4413
4414/* Queue an evaluate context command TRB */
4415int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd,
4416 dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed)
4417{
4418 return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
4419 upper_32_bits(in_ctx_ptr), 0,
4420 TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id),
4421 command_must_succeed);
4422}
4423
4424/*
4425 * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop
4426 * activity on an endpoint that is about to be suspended.
4427 */
4428int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd,
4429 int slot_id, unsigned int ep_index, int suspend)
4430{
4431 u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
4432 u32 trb_ep_index = EP_INDEX_FOR_TRB(ep_index);
4433 u32 type = TRB_TYPE(TRB_STOP_RING);
4434 u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend);
4435
4436 return queue_command(xhci, cmd, 0, 0, 0,
4437 trb_slot_id | trb_ep_index | type | trb_suspend, false);
4438}
4439
4440int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd,
4441 int slot_id, unsigned int ep_index,
4442 enum xhci_ep_reset_type reset_type)
4443{
4444 u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
4445 u32 trb_ep_index = EP_INDEX_FOR_TRB(ep_index);
4446 u32 type = TRB_TYPE(TRB_RESET_EP);
4447
4448 if (reset_type == EP_SOFT_RESET)
4449 type |= TRB_TSP;
4450
4451 return queue_command(xhci, cmd, 0, 0, 0,
4452 trb_slot_id | trb_ep_index | type, false);
4453}