Loading...
1/* ppa.c -- low level driver for the IOMEGA PPA3
2 * parallel port SCSI host adapter.
3 *
4 * (The PPA3 is the embedded controller in the ZIP drive.)
5 *
6 * (c) 1995,1996 Grant R. Guenther, grant@torque.net,
7 * under the terms of the GNU General Public License.
8 *
9 */
10
11#include <linux/init.h>
12#include <linux/kernel.h>
13#include <linux/slab.h>
14#include <linux/module.h>
15#include <linux/blkdev.h>
16#include <linux/parport.h>
17#include <linux/workqueue.h>
18#include <linux/delay.h>
19#include <linux/jiffies.h>
20#include <asm/io.h>
21
22#include <scsi/scsi.h>
23#include <scsi/scsi_cmnd.h>
24#include <scsi/scsi_device.h>
25#include <scsi/scsi_host.h>
26
27
28static void ppa_reset_pulse(unsigned int base);
29
30typedef struct {
31 struct pardevice *dev; /* Parport device entry */
32 int base; /* Actual port address */
33 int mode; /* Transfer mode */
34 struct scsi_cmnd *cur_cmd; /* Current queued command */
35 struct delayed_work ppa_tq; /* Polling interrupt stuff */
36 unsigned long jstart; /* Jiffies at start */
37 unsigned long recon_tmo; /* How many usecs to wait for reconnection (6th bit) */
38 unsigned int failed:1; /* Failure flag */
39 unsigned wanted:1; /* Parport sharing busy flag */
40 wait_queue_head_t *waiting;
41 struct Scsi_Host *host;
42 struct list_head list;
43} ppa_struct;
44
45#include "ppa.h"
46
47static inline ppa_struct *ppa_dev(struct Scsi_Host *host)
48{
49 return *(ppa_struct **)&host->hostdata;
50}
51
52static DEFINE_SPINLOCK(arbitration_lock);
53
54static void got_it(ppa_struct *dev)
55{
56 dev->base = dev->dev->port->base;
57 if (dev->cur_cmd)
58 dev->cur_cmd->SCp.phase = 1;
59 else
60 wake_up(dev->waiting);
61}
62
63static void ppa_wakeup(void *ref)
64{
65 ppa_struct *dev = (ppa_struct *) ref;
66 unsigned long flags;
67
68 spin_lock_irqsave(&arbitration_lock, flags);
69 if (dev->wanted) {
70 parport_claim(dev->dev);
71 got_it(dev);
72 dev->wanted = 0;
73 }
74 spin_unlock_irqrestore(&arbitration_lock, flags);
75 return;
76}
77
78static int ppa_pb_claim(ppa_struct *dev)
79{
80 unsigned long flags;
81 int res = 1;
82 spin_lock_irqsave(&arbitration_lock, flags);
83 if (parport_claim(dev->dev) == 0) {
84 got_it(dev);
85 res = 0;
86 }
87 dev->wanted = res;
88 spin_unlock_irqrestore(&arbitration_lock, flags);
89 return res;
90}
91
92static void ppa_pb_dismiss(ppa_struct *dev)
93{
94 unsigned long flags;
95 int wanted;
96 spin_lock_irqsave(&arbitration_lock, flags);
97 wanted = dev->wanted;
98 dev->wanted = 0;
99 spin_unlock_irqrestore(&arbitration_lock, flags);
100 if (!wanted)
101 parport_release(dev->dev);
102}
103
104static inline void ppa_pb_release(ppa_struct *dev)
105{
106 parport_release(dev->dev);
107}
108
109/*
110 * Start of Chipset kludges
111 */
112
113/* This is to give the ppa driver a way to modify the timings (and other
114 * parameters) by writing to the /proc/scsi/ppa/0 file.
115 * Very simple method really... (To simple, no error checking :( )
116 * Reason: Kernel hackers HATE having to unload and reload modules for
117 * testing...
118 * Also gives a method to use a script to obtain optimum timings (TODO)
119 */
120
121static inline int ppa_write_info(struct Scsi_Host *host, char *buffer, int length)
122{
123 ppa_struct *dev = ppa_dev(host);
124 unsigned long x;
125
126 if ((length > 5) && (strncmp(buffer, "mode=", 5) == 0)) {
127 x = simple_strtoul(buffer + 5, NULL, 0);
128 dev->mode = x;
129 return length;
130 }
131 if ((length > 10) && (strncmp(buffer, "recon_tmo=", 10) == 0)) {
132 x = simple_strtoul(buffer + 10, NULL, 0);
133 dev->recon_tmo = x;
134 printk(KERN_INFO "ppa: recon_tmo set to %ld\n", x);
135 return length;
136 }
137 printk(KERN_WARNING "ppa /proc: invalid variable\n");
138 return -EINVAL;
139}
140
141static int ppa_show_info(struct seq_file *m, struct Scsi_Host *host)
142{
143 ppa_struct *dev = ppa_dev(host);
144
145 seq_printf(m, "Version : %s\n", PPA_VERSION);
146 seq_printf(m, "Parport : %s\n", dev->dev->port->name);
147 seq_printf(m, "Mode : %s\n", PPA_MODE_STRING[dev->mode]);
148#if PPA_DEBUG > 0
149 seq_printf(m, "recon_tmo : %lu\n", dev->recon_tmo);
150#endif
151 return 0;
152}
153
154static int device_check(ppa_struct *dev);
155
156#if PPA_DEBUG > 0
157#define ppa_fail(x,y) printk("ppa: ppa_fail(%i) from %s at line %d\n",\
158 y, __func__, __LINE__); ppa_fail_func(x,y);
159static inline void ppa_fail_func(ppa_struct *dev, int error_code)
160#else
161static inline void ppa_fail(ppa_struct *dev, int error_code)
162#endif
163{
164 /* If we fail a device then we trash status / message bytes */
165 if (dev->cur_cmd) {
166 dev->cur_cmd->result = error_code << 16;
167 dev->failed = 1;
168 }
169}
170
171/*
172 * Wait for the high bit to be set.
173 *
174 * In principle, this could be tied to an interrupt, but the adapter
175 * doesn't appear to be designed to support interrupts. We spin on
176 * the 0x80 ready bit.
177 */
178static unsigned char ppa_wait(ppa_struct *dev)
179{
180 int k;
181 unsigned short ppb = dev->base;
182 unsigned char r;
183
184 k = PPA_SPIN_TMO;
185 /* Wait for bit 6 and 7 - PJC */
186 for (r = r_str(ppb); ((r & 0xc0) != 0xc0) && (k); k--) {
187 udelay(1);
188 r = r_str(ppb);
189 }
190
191 /*
192 * return some status information.
193 * Semantics: 0xc0 = ZIP wants more data
194 * 0xd0 = ZIP wants to send more data
195 * 0xe0 = ZIP is expecting SCSI command data
196 * 0xf0 = end of transfer, ZIP is sending status
197 */
198 if (k)
199 return (r & 0xf0);
200
201 /* Counter expired - Time out occurred */
202 ppa_fail(dev, DID_TIME_OUT);
203 printk(KERN_WARNING "ppa timeout in ppa_wait\n");
204 return 0; /* command timed out */
205}
206
207/*
208 * Clear EPP Timeout Bit
209 */
210static inline void epp_reset(unsigned short ppb)
211{
212 int i;
213
214 i = r_str(ppb);
215 w_str(ppb, i);
216 w_str(ppb, i & 0xfe);
217}
218
219/*
220 * Wait for empty ECP fifo (if we are in ECP fifo mode only)
221 */
222static inline void ecp_sync(ppa_struct *dev)
223{
224 int i, ppb_hi = dev->dev->port->base_hi;
225
226 if (ppb_hi == 0)
227 return;
228
229 if ((r_ecr(ppb_hi) & 0xe0) == 0x60) { /* mode 011 == ECP fifo mode */
230 for (i = 0; i < 100; i++) {
231 if (r_ecr(ppb_hi) & 0x01)
232 return;
233 udelay(5);
234 }
235 printk(KERN_WARNING "ppa: ECP sync failed as data still present in FIFO.\n");
236 }
237}
238
239static int ppa_byte_out(unsigned short base, const char *buffer, int len)
240{
241 int i;
242
243 for (i = len; i; i--) {
244 w_dtr(base, *buffer++);
245 w_ctr(base, 0xe);
246 w_ctr(base, 0xc);
247 }
248 return 1; /* All went well - we hope! */
249}
250
251static int ppa_byte_in(unsigned short base, char *buffer, int len)
252{
253 int i;
254
255 for (i = len; i; i--) {
256 *buffer++ = r_dtr(base);
257 w_ctr(base, 0x27);
258 w_ctr(base, 0x25);
259 }
260 return 1; /* All went well - we hope! */
261}
262
263static int ppa_nibble_in(unsigned short base, char *buffer, int len)
264{
265 for (; len; len--) {
266 unsigned char h;
267
268 w_ctr(base, 0x4);
269 h = r_str(base) & 0xf0;
270 w_ctr(base, 0x6);
271 *buffer++ = h | ((r_str(base) & 0xf0) >> 4);
272 }
273 return 1; /* All went well - we hope! */
274}
275
276static int ppa_out(ppa_struct *dev, char *buffer, int len)
277{
278 int r;
279 unsigned short ppb = dev->base;
280
281 r = ppa_wait(dev);
282
283 if ((r & 0x50) != 0x40) {
284 ppa_fail(dev, DID_ERROR);
285 return 0;
286 }
287 switch (dev->mode) {
288 case PPA_NIBBLE:
289 case PPA_PS2:
290 /* 8 bit output, with a loop */
291 r = ppa_byte_out(ppb, buffer, len);
292 break;
293
294 case PPA_EPP_32:
295 case PPA_EPP_16:
296 case PPA_EPP_8:
297 epp_reset(ppb);
298 w_ctr(ppb, 0x4);
299#ifdef CONFIG_SCSI_IZIP_EPP16
300 if (!(((long) buffer | len) & 0x01))
301 outsw(ppb + 4, buffer, len >> 1);
302#else
303 if (!(((long) buffer | len) & 0x03))
304 outsl(ppb + 4, buffer, len >> 2);
305#endif
306 else
307 outsb(ppb + 4, buffer, len);
308 w_ctr(ppb, 0xc);
309 r = !(r_str(ppb) & 0x01);
310 w_ctr(ppb, 0xc);
311 ecp_sync(dev);
312 break;
313
314 default:
315 printk(KERN_ERR "PPA: bug in ppa_out()\n");
316 r = 0;
317 }
318 return r;
319}
320
321static int ppa_in(ppa_struct *dev, char *buffer, int len)
322{
323 int r;
324 unsigned short ppb = dev->base;
325
326 r = ppa_wait(dev);
327
328 if ((r & 0x50) != 0x50) {
329 ppa_fail(dev, DID_ERROR);
330 return 0;
331 }
332 switch (dev->mode) {
333 case PPA_NIBBLE:
334 /* 4 bit input, with a loop */
335 r = ppa_nibble_in(ppb, buffer, len);
336 w_ctr(ppb, 0xc);
337 break;
338
339 case PPA_PS2:
340 /* 8 bit input, with a loop */
341 w_ctr(ppb, 0x25);
342 r = ppa_byte_in(ppb, buffer, len);
343 w_ctr(ppb, 0x4);
344 w_ctr(ppb, 0xc);
345 break;
346
347 case PPA_EPP_32:
348 case PPA_EPP_16:
349 case PPA_EPP_8:
350 epp_reset(ppb);
351 w_ctr(ppb, 0x24);
352#ifdef CONFIG_SCSI_IZIP_EPP16
353 if (!(((long) buffer | len) & 0x01))
354 insw(ppb + 4, buffer, len >> 1);
355#else
356 if (!(((long) buffer | len) & 0x03))
357 insl(ppb + 4, buffer, len >> 2);
358#endif
359 else
360 insb(ppb + 4, buffer, len);
361 w_ctr(ppb, 0x2c);
362 r = !(r_str(ppb) & 0x01);
363 w_ctr(ppb, 0x2c);
364 ecp_sync(dev);
365 break;
366
367 default:
368 printk(KERN_ERR "PPA: bug in ppa_ins()\n");
369 r = 0;
370 break;
371 }
372 return r;
373}
374
375/* end of ppa_io.h */
376static inline void ppa_d_pulse(unsigned short ppb, unsigned char b)
377{
378 w_dtr(ppb, b);
379 w_ctr(ppb, 0xc);
380 w_ctr(ppb, 0xe);
381 w_ctr(ppb, 0xc);
382 w_ctr(ppb, 0x4);
383 w_ctr(ppb, 0xc);
384}
385
386static void ppa_disconnect(ppa_struct *dev)
387{
388 unsigned short ppb = dev->base;
389
390 ppa_d_pulse(ppb, 0);
391 ppa_d_pulse(ppb, 0x3c);
392 ppa_d_pulse(ppb, 0x20);
393 ppa_d_pulse(ppb, 0xf);
394}
395
396static inline void ppa_c_pulse(unsigned short ppb, unsigned char b)
397{
398 w_dtr(ppb, b);
399 w_ctr(ppb, 0x4);
400 w_ctr(ppb, 0x6);
401 w_ctr(ppb, 0x4);
402 w_ctr(ppb, 0xc);
403}
404
405static inline void ppa_connect(ppa_struct *dev, int flag)
406{
407 unsigned short ppb = dev->base;
408
409 ppa_c_pulse(ppb, 0);
410 ppa_c_pulse(ppb, 0x3c);
411 ppa_c_pulse(ppb, 0x20);
412 if ((flag == CONNECT_EPP_MAYBE) && IN_EPP_MODE(dev->mode))
413 ppa_c_pulse(ppb, 0xcf);
414 else
415 ppa_c_pulse(ppb, 0x8f);
416}
417
418static int ppa_select(ppa_struct *dev, int target)
419{
420 int k;
421 unsigned short ppb = dev->base;
422
423 /*
424 * Bit 6 (0x40) is the device selected bit.
425 * First we must wait till the current device goes off line...
426 */
427 k = PPA_SELECT_TMO;
428 do {
429 k--;
430 udelay(1);
431 } while ((r_str(ppb) & 0x40) && (k));
432 if (!k)
433 return 0;
434
435 w_dtr(ppb, (1 << target));
436 w_ctr(ppb, 0xe);
437 w_ctr(ppb, 0xc);
438 w_dtr(ppb, 0x80); /* This is NOT the initator */
439 w_ctr(ppb, 0x8);
440
441 k = PPA_SELECT_TMO;
442 do {
443 k--;
444 udelay(1);
445 }
446 while (!(r_str(ppb) & 0x40) && (k));
447 if (!k)
448 return 0;
449
450 return 1;
451}
452
453/*
454 * This is based on a trace of what the Iomega DOS 'guest' driver does.
455 * I've tried several different kinds of parallel ports with guest and
456 * coded this to react in the same ways that it does.
457 *
458 * The return value from this function is just a hint about where the
459 * handshaking failed.
460 *
461 */
462static int ppa_init(ppa_struct *dev)
463{
464 int retv;
465 unsigned short ppb = dev->base;
466
467 ppa_disconnect(dev);
468 ppa_connect(dev, CONNECT_NORMAL);
469
470 retv = 2; /* Failed */
471
472 w_ctr(ppb, 0xe);
473 if ((r_str(ppb) & 0x08) == 0x08)
474 retv--;
475
476 w_ctr(ppb, 0xc);
477 if ((r_str(ppb) & 0x08) == 0x00)
478 retv--;
479
480 if (!retv)
481 ppa_reset_pulse(ppb);
482 udelay(1000); /* Allow devices to settle down */
483 ppa_disconnect(dev);
484 udelay(1000); /* Another delay to allow devices to settle */
485
486 if (retv)
487 return -EIO;
488
489 return device_check(dev);
490}
491
492static inline int ppa_send_command(struct scsi_cmnd *cmd)
493{
494 ppa_struct *dev = ppa_dev(cmd->device->host);
495 int k;
496
497 w_ctr(dev->base, 0x0c);
498
499 for (k = 0; k < cmd->cmd_len; k++)
500 if (!ppa_out(dev, &cmd->cmnd[k], 1))
501 return 0;
502 return 1;
503}
504
505/*
506 * The bulk flag enables some optimisations in the data transfer loops,
507 * it should be true for any command that transfers data in integral
508 * numbers of sectors.
509 *
510 * The driver appears to remain stable if we speed up the parallel port
511 * i/o in this function, but not elsewhere.
512 */
513static int ppa_completion(struct scsi_cmnd *cmd)
514{
515 /* Return codes:
516 * -1 Error
517 * 0 Told to schedule
518 * 1 Finished data transfer
519 */
520 ppa_struct *dev = ppa_dev(cmd->device->host);
521 unsigned short ppb = dev->base;
522 unsigned long start_jiffies = jiffies;
523
524 unsigned char r, v;
525 int fast, bulk, status;
526
527 v = cmd->cmnd[0];
528 bulk = ((v == READ_6) ||
529 (v == READ_10) || (v == WRITE_6) || (v == WRITE_10));
530
531 /*
532 * We only get here if the drive is ready to comunicate,
533 * hence no need for a full ppa_wait.
534 */
535 r = (r_str(ppb) & 0xf0);
536
537 while (r != (unsigned char) 0xf0) {
538 /*
539 * If we have been running for more than a full timer tick
540 * then take a rest.
541 */
542 if (time_after(jiffies, start_jiffies + 1))
543 return 0;
544
545 if ((cmd->SCp.this_residual <= 0)) {
546 ppa_fail(dev, DID_ERROR);
547 return -1; /* ERROR_RETURN */
548 }
549
550 /* On some hardware we have SCSI disconnected (6th bit low)
551 * for about 100usecs. It is too expensive to wait a
552 * tick on every loop so we busy wait for no more than
553 * 500usecs to give the drive a chance first. We do not
554 * change things for "normal" hardware since generally
555 * the 6th bit is always high.
556 * This makes the CPU load higher on some hardware
557 * but otherwise we can not get more than 50K/secs
558 * on this problem hardware.
559 */
560 if ((r & 0xc0) != 0xc0) {
561 /* Wait for reconnection should be no more than
562 * jiffy/2 = 5ms = 5000 loops
563 */
564 unsigned long k = dev->recon_tmo;
565 for (; k && ((r = (r_str(ppb) & 0xf0)) & 0xc0) != 0xc0;
566 k--)
567 udelay(1);
568
569 if (!k)
570 return 0;
571 }
572
573 /* determine if we should use burst I/O */
574 fast = (bulk && (cmd->SCp.this_residual >= PPA_BURST_SIZE))
575 ? PPA_BURST_SIZE : 1;
576
577 if (r == (unsigned char) 0xc0)
578 status = ppa_out(dev, cmd->SCp.ptr, fast);
579 else
580 status = ppa_in(dev, cmd->SCp.ptr, fast);
581
582 cmd->SCp.ptr += fast;
583 cmd->SCp.this_residual -= fast;
584
585 if (!status) {
586 ppa_fail(dev, DID_BUS_BUSY);
587 return -1; /* ERROR_RETURN */
588 }
589 if (cmd->SCp.buffer && !cmd->SCp.this_residual) {
590 /* if scatter/gather, advance to the next segment */
591 if (cmd->SCp.buffers_residual--) {
592 cmd->SCp.buffer++;
593 cmd->SCp.this_residual =
594 cmd->SCp.buffer->length;
595 cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
596 }
597 }
598 /* Now check to see if the drive is ready to comunicate */
599 r = (r_str(ppb) & 0xf0);
600 /* If not, drop back down to the scheduler and wait a timer tick */
601 if (!(r & 0x80))
602 return 0;
603 }
604 return 1; /* FINISH_RETURN */
605}
606
607/*
608 * Since the PPA itself doesn't generate interrupts, we use
609 * the scheduler's task queue to generate a stream of call-backs and
610 * complete the request when the drive is ready.
611 */
612static void ppa_interrupt(struct work_struct *work)
613{
614 ppa_struct *dev = container_of(work, ppa_struct, ppa_tq.work);
615 struct scsi_cmnd *cmd = dev->cur_cmd;
616
617 if (!cmd) {
618 printk(KERN_ERR "PPA: bug in ppa_interrupt\n");
619 return;
620 }
621 if (ppa_engine(dev, cmd)) {
622 schedule_delayed_work(&dev->ppa_tq, 1);
623 return;
624 }
625 /* Command must of completed hence it is safe to let go... */
626#if PPA_DEBUG > 0
627 switch ((cmd->result >> 16) & 0xff) {
628 case DID_OK:
629 break;
630 case DID_NO_CONNECT:
631 printk(KERN_DEBUG "ppa: no device at SCSI ID %i\n", cmd->device->target);
632 break;
633 case DID_BUS_BUSY:
634 printk(KERN_DEBUG "ppa: BUS BUSY - EPP timeout detected\n");
635 break;
636 case DID_TIME_OUT:
637 printk(KERN_DEBUG "ppa: unknown timeout\n");
638 break;
639 case DID_ABORT:
640 printk(KERN_DEBUG "ppa: told to abort\n");
641 break;
642 case DID_PARITY:
643 printk(KERN_DEBUG "ppa: parity error (???)\n");
644 break;
645 case DID_ERROR:
646 printk(KERN_DEBUG "ppa: internal driver error\n");
647 break;
648 case DID_RESET:
649 printk(KERN_DEBUG "ppa: told to reset device\n");
650 break;
651 case DID_BAD_INTR:
652 printk(KERN_WARNING "ppa: bad interrupt (???)\n");
653 break;
654 default:
655 printk(KERN_WARNING "ppa: bad return code (%02x)\n",
656 (cmd->result >> 16) & 0xff);
657 }
658#endif
659
660 if (cmd->SCp.phase > 1)
661 ppa_disconnect(dev);
662
663 ppa_pb_dismiss(dev);
664
665 dev->cur_cmd = NULL;
666
667 cmd->scsi_done(cmd);
668}
669
670static int ppa_engine(ppa_struct *dev, struct scsi_cmnd *cmd)
671{
672 unsigned short ppb = dev->base;
673 unsigned char l = 0, h = 0;
674 int retv;
675
676 /* First check for any errors that may of occurred
677 * Here we check for internal errors
678 */
679 if (dev->failed)
680 return 0;
681
682 switch (cmd->SCp.phase) {
683 case 0: /* Phase 0 - Waiting for parport */
684 if (time_after(jiffies, dev->jstart + HZ)) {
685 /*
686 * We waited more than a second
687 * for parport to call us
688 */
689 ppa_fail(dev, DID_BUS_BUSY);
690 return 0;
691 }
692 return 1; /* wait until ppa_wakeup claims parport */
693 case 1: /* Phase 1 - Connected */
694 { /* Perform a sanity check for cable unplugged */
695 int retv = 2; /* Failed */
696
697 ppa_connect(dev, CONNECT_EPP_MAYBE);
698
699 w_ctr(ppb, 0xe);
700 if ((r_str(ppb) & 0x08) == 0x08)
701 retv--;
702
703 w_ctr(ppb, 0xc);
704 if ((r_str(ppb) & 0x08) == 0x00)
705 retv--;
706
707 if (retv) {
708 if (time_after(jiffies, dev->jstart + (1 * HZ))) {
709 printk(KERN_ERR "ppa: Parallel port cable is unplugged.\n");
710 ppa_fail(dev, DID_BUS_BUSY);
711 return 0;
712 } else {
713 ppa_disconnect(dev);
714 return 1; /* Try again in a jiffy */
715 }
716 }
717 cmd->SCp.phase++;
718 }
719
720 case 2: /* Phase 2 - We are now talking to the scsi bus */
721 if (!ppa_select(dev, scmd_id(cmd))) {
722 ppa_fail(dev, DID_NO_CONNECT);
723 return 0;
724 }
725 cmd->SCp.phase++;
726
727 case 3: /* Phase 3 - Ready to accept a command */
728 w_ctr(ppb, 0x0c);
729 if (!(r_str(ppb) & 0x80))
730 return 1;
731
732 if (!ppa_send_command(cmd))
733 return 0;
734 cmd->SCp.phase++;
735
736 case 4: /* Phase 4 - Setup scatter/gather buffers */
737 if (scsi_bufflen(cmd)) {
738 cmd->SCp.buffer = scsi_sglist(cmd);
739 cmd->SCp.this_residual = cmd->SCp.buffer->length;
740 cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
741 } else {
742 cmd->SCp.buffer = NULL;
743 cmd->SCp.this_residual = 0;
744 cmd->SCp.ptr = NULL;
745 }
746 cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
747 cmd->SCp.phase++;
748
749 case 5: /* Phase 5 - Data transfer stage */
750 w_ctr(ppb, 0x0c);
751 if (!(r_str(ppb) & 0x80))
752 return 1;
753
754 retv = ppa_completion(cmd);
755 if (retv == -1)
756 return 0;
757 if (retv == 0)
758 return 1;
759 cmd->SCp.phase++;
760
761 case 6: /* Phase 6 - Read status/message */
762 cmd->result = DID_OK << 16;
763 /* Check for data overrun */
764 if (ppa_wait(dev) != (unsigned char) 0xf0) {
765 ppa_fail(dev, DID_ERROR);
766 return 0;
767 }
768 if (ppa_in(dev, &l, 1)) { /* read status byte */
769 /* Check for optional message byte */
770 if (ppa_wait(dev) == (unsigned char) 0xf0)
771 ppa_in(dev, &h, 1);
772 cmd->result =
773 (DID_OK << 16) + (h << 8) + (l & STATUS_MASK);
774 }
775 return 0; /* Finished */
776 break;
777
778 default:
779 printk(KERN_ERR "ppa: Invalid scsi phase\n");
780 }
781 return 0;
782}
783
784static int ppa_queuecommand_lck(struct scsi_cmnd *cmd,
785 void (*done) (struct scsi_cmnd *))
786{
787 ppa_struct *dev = ppa_dev(cmd->device->host);
788
789 if (dev->cur_cmd) {
790 printk(KERN_ERR "PPA: bug in ppa_queuecommand\n");
791 return 0;
792 }
793 dev->failed = 0;
794 dev->jstart = jiffies;
795 dev->cur_cmd = cmd;
796 cmd->scsi_done = done;
797 cmd->result = DID_ERROR << 16; /* default return code */
798 cmd->SCp.phase = 0; /* bus free */
799
800 schedule_delayed_work(&dev->ppa_tq, 0);
801
802 ppa_pb_claim(dev);
803
804 return 0;
805}
806
807static DEF_SCSI_QCMD(ppa_queuecommand)
808
809/*
810 * Apparently the disk->capacity attribute is off by 1 sector
811 * for all disk drives. We add the one here, but it should really
812 * be done in sd.c. Even if it gets fixed there, this will still
813 * work.
814 */
815static int ppa_biosparam(struct scsi_device *sdev, struct block_device *dev,
816 sector_t capacity, int ip[])
817{
818 ip[0] = 0x40;
819 ip[1] = 0x20;
820 ip[2] = ((unsigned long) capacity + 1) / (ip[0] * ip[1]);
821 if (ip[2] > 1024) {
822 ip[0] = 0xff;
823 ip[1] = 0x3f;
824 ip[2] = ((unsigned long) capacity + 1) / (ip[0] * ip[1]);
825 if (ip[2] > 1023)
826 ip[2] = 1023;
827 }
828 return 0;
829}
830
831static int ppa_abort(struct scsi_cmnd *cmd)
832{
833 ppa_struct *dev = ppa_dev(cmd->device->host);
834 /*
835 * There is no method for aborting commands since Iomega
836 * have tied the SCSI_MESSAGE line high in the interface
837 */
838
839 switch (cmd->SCp.phase) {
840 case 0: /* Do not have access to parport */
841 case 1: /* Have not connected to interface */
842 dev->cur_cmd = NULL; /* Forget the problem */
843 return SUCCESS;
844 break;
845 default: /* SCSI command sent, can not abort */
846 return FAILED;
847 break;
848 }
849}
850
851static void ppa_reset_pulse(unsigned int base)
852{
853 w_dtr(base, 0x40);
854 w_ctr(base, 0x8);
855 udelay(30);
856 w_ctr(base, 0xc);
857}
858
859static int ppa_reset(struct scsi_cmnd *cmd)
860{
861 ppa_struct *dev = ppa_dev(cmd->device->host);
862
863 if (cmd->SCp.phase)
864 ppa_disconnect(dev);
865 dev->cur_cmd = NULL; /* Forget the problem */
866
867 ppa_connect(dev, CONNECT_NORMAL);
868 ppa_reset_pulse(dev->base);
869 mdelay(1); /* device settle delay */
870 ppa_disconnect(dev);
871 mdelay(1); /* device settle delay */
872 return SUCCESS;
873}
874
875static int device_check(ppa_struct *dev)
876{
877 /* This routine looks for a device and then attempts to use EPP
878 to send a command. If all goes as planned then EPP is available. */
879
880 static u8 cmd[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
881 int loop, old_mode, status, k, ppb = dev->base;
882 unsigned char l;
883
884 old_mode = dev->mode;
885 for (loop = 0; loop < 8; loop++) {
886 /* Attempt to use EPP for Test Unit Ready */
887 if ((ppb & 0x0007) == 0x0000)
888 dev->mode = PPA_EPP_32;
889
890second_pass:
891 ppa_connect(dev, CONNECT_EPP_MAYBE);
892 /* Select SCSI device */
893 if (!ppa_select(dev, loop)) {
894 ppa_disconnect(dev);
895 continue;
896 }
897 printk(KERN_INFO "ppa: Found device at ID %i, Attempting to use %s\n",
898 loop, PPA_MODE_STRING[dev->mode]);
899
900 /* Send SCSI command */
901 status = 1;
902 w_ctr(ppb, 0x0c);
903 for (l = 0; (l < 6) && (status); l++)
904 status = ppa_out(dev, cmd, 1);
905
906 if (!status) {
907 ppa_disconnect(dev);
908 ppa_connect(dev, CONNECT_EPP_MAYBE);
909 w_dtr(ppb, 0x40);
910 w_ctr(ppb, 0x08);
911 udelay(30);
912 w_ctr(ppb, 0x0c);
913 udelay(1000);
914 ppa_disconnect(dev);
915 udelay(1000);
916 if (dev->mode == PPA_EPP_32) {
917 dev->mode = old_mode;
918 goto second_pass;
919 }
920 return -EIO;
921 }
922 w_ctr(ppb, 0x0c);
923 k = 1000000; /* 1 Second */
924 do {
925 l = r_str(ppb);
926 k--;
927 udelay(1);
928 } while (!(l & 0x80) && (k));
929
930 l &= 0xf0;
931
932 if (l != 0xf0) {
933 ppa_disconnect(dev);
934 ppa_connect(dev, CONNECT_EPP_MAYBE);
935 ppa_reset_pulse(ppb);
936 udelay(1000);
937 ppa_disconnect(dev);
938 udelay(1000);
939 if (dev->mode == PPA_EPP_32) {
940 dev->mode = old_mode;
941 goto second_pass;
942 }
943 return -EIO;
944 }
945 ppa_disconnect(dev);
946 printk(KERN_INFO "ppa: Communication established with ID %i using %s\n",
947 loop, PPA_MODE_STRING[dev->mode]);
948 ppa_connect(dev, CONNECT_EPP_MAYBE);
949 ppa_reset_pulse(ppb);
950 udelay(1000);
951 ppa_disconnect(dev);
952 udelay(1000);
953 return 0;
954 }
955 return -ENODEV;
956}
957
958static int ppa_adjust_queue(struct scsi_device *device)
959{
960 blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
961 return 0;
962}
963
964static struct scsi_host_template ppa_template = {
965 .module = THIS_MODULE,
966 .proc_name = "ppa",
967 .show_info = ppa_show_info,
968 .write_info = ppa_write_info,
969 .name = "Iomega VPI0 (ppa) interface",
970 .queuecommand = ppa_queuecommand,
971 .eh_abort_handler = ppa_abort,
972 .eh_bus_reset_handler = ppa_reset,
973 .eh_host_reset_handler = ppa_reset,
974 .bios_param = ppa_biosparam,
975 .this_id = -1,
976 .sg_tablesize = SG_ALL,
977 .cmd_per_lun = 1,
978 .use_clustering = ENABLE_CLUSTERING,
979 .can_queue = 1,
980 .slave_alloc = ppa_adjust_queue,
981};
982
983/***************************************************************************
984 * Parallel port probing routines *
985 ***************************************************************************/
986
987static LIST_HEAD(ppa_hosts);
988
989static int __ppa_attach(struct parport *pb)
990{
991 struct Scsi_Host *host;
992 DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waiting);
993 DEFINE_WAIT(wait);
994 ppa_struct *dev;
995 int ports;
996 int modes, ppb, ppb_hi;
997 int err = -ENOMEM;
998
999 dev = kzalloc(sizeof(ppa_struct), GFP_KERNEL);
1000 if (!dev)
1001 return -ENOMEM;
1002 dev->base = -1;
1003 dev->mode = PPA_AUTODETECT;
1004 dev->recon_tmo = PPA_RECON_TMO;
1005 init_waitqueue_head(&waiting);
1006 dev->dev = parport_register_device(pb, "ppa", NULL, ppa_wakeup,
1007 NULL, 0, dev);
1008
1009 if (!dev->dev)
1010 goto out;
1011
1012 /* Claim the bus so it remembers what we do to the control
1013 * registers. [ CTR and ECP ]
1014 */
1015 err = -EBUSY;
1016 dev->waiting = &waiting;
1017 prepare_to_wait(&waiting, &wait, TASK_UNINTERRUPTIBLE);
1018 if (ppa_pb_claim(dev))
1019 schedule_timeout(3 * HZ);
1020 if (dev->wanted) {
1021 printk(KERN_ERR "ppa%d: failed to claim parport because "
1022 "a pardevice is owning the port for too long "
1023 "time!\n", pb->number);
1024 ppa_pb_dismiss(dev);
1025 dev->waiting = NULL;
1026 finish_wait(&waiting, &wait);
1027 goto out1;
1028 }
1029 dev->waiting = NULL;
1030 finish_wait(&waiting, &wait);
1031 ppb = dev->base = dev->dev->port->base;
1032 ppb_hi = dev->dev->port->base_hi;
1033 w_ctr(ppb, 0x0c);
1034 modes = dev->dev->port->modes;
1035
1036 /* Mode detection works up the chain of speed
1037 * This avoids a nasty if-then-else-if-... tree
1038 */
1039 dev->mode = PPA_NIBBLE;
1040
1041 if (modes & PARPORT_MODE_TRISTATE)
1042 dev->mode = PPA_PS2;
1043
1044 if (modes & PARPORT_MODE_ECP) {
1045 w_ecr(ppb_hi, 0x20);
1046 dev->mode = PPA_PS2;
1047 }
1048 if ((modes & PARPORT_MODE_EPP) && (modes & PARPORT_MODE_ECP))
1049 w_ecr(ppb_hi, 0x80);
1050
1051 /* Done configuration */
1052
1053 err = ppa_init(dev);
1054 ppa_pb_release(dev);
1055
1056 if (err)
1057 goto out1;
1058
1059 /* now the glue ... */
1060 if (dev->mode == PPA_NIBBLE || dev->mode == PPA_PS2)
1061 ports = 3;
1062 else
1063 ports = 8;
1064
1065 INIT_DELAYED_WORK(&dev->ppa_tq, ppa_interrupt);
1066
1067 err = -ENOMEM;
1068 host = scsi_host_alloc(&ppa_template, sizeof(ppa_struct *));
1069 if (!host)
1070 goto out1;
1071 host->io_port = pb->base;
1072 host->n_io_port = ports;
1073 host->dma_channel = -1;
1074 host->unique_id = pb->number;
1075 *(ppa_struct **)&host->hostdata = dev;
1076 dev->host = host;
1077 list_add_tail(&dev->list, &ppa_hosts);
1078 err = scsi_add_host(host, NULL);
1079 if (err)
1080 goto out2;
1081 scsi_scan_host(host);
1082 return 0;
1083out2:
1084 list_del_init(&dev->list);
1085 scsi_host_put(host);
1086out1:
1087 parport_unregister_device(dev->dev);
1088out:
1089 kfree(dev);
1090 return err;
1091}
1092
1093static void ppa_attach(struct parport *pb)
1094{
1095 __ppa_attach(pb);
1096}
1097
1098static void ppa_detach(struct parport *pb)
1099{
1100 ppa_struct *dev;
1101 list_for_each_entry(dev, &ppa_hosts, list) {
1102 if (dev->dev->port == pb) {
1103 list_del_init(&dev->list);
1104 scsi_remove_host(dev->host);
1105 scsi_host_put(dev->host);
1106 parport_unregister_device(dev->dev);
1107 kfree(dev);
1108 break;
1109 }
1110 }
1111}
1112
1113static struct parport_driver ppa_driver = {
1114 .name = "ppa",
1115 .attach = ppa_attach,
1116 .detach = ppa_detach,
1117};
1118
1119static int __init ppa_driver_init(void)
1120{
1121 printk(KERN_INFO "ppa: Version %s\n", PPA_VERSION);
1122 return parport_register_driver(&ppa_driver);
1123}
1124
1125static void __exit ppa_driver_exit(void)
1126{
1127 parport_unregister_driver(&ppa_driver);
1128}
1129
1130module_init(ppa_driver_init);
1131module_exit(ppa_driver_exit);
1132MODULE_LICENSE("GPL");
1/* ppa.c -- low level driver for the IOMEGA PPA3
2 * parallel port SCSI host adapter.
3 *
4 * (The PPA3 is the embedded controller in the ZIP drive.)
5 *
6 * (c) 1995,1996 Grant R. Guenther, grant@torque.net,
7 * under the terms of the GNU General Public License.
8 *
9 */
10
11#include <linux/init.h>
12#include <linux/kernel.h>
13#include <linux/slab.h>
14#include <linux/module.h>
15#include <linux/blkdev.h>
16#include <linux/parport.h>
17#include <linux/workqueue.h>
18#include <linux/delay.h>
19#include <linux/jiffies.h>
20#include <asm/io.h>
21
22#include <scsi/scsi.h>
23#include <scsi/scsi_cmnd.h>
24#include <scsi/scsi_device.h>
25#include <scsi/scsi_host.h>
26
27
28static void ppa_reset_pulse(unsigned int base);
29
30typedef struct {
31 struct pardevice *dev; /* Parport device entry */
32 int base; /* Actual port address */
33 int mode; /* Transfer mode */
34 struct scsi_cmnd *cur_cmd; /* Current queued command */
35 struct delayed_work ppa_tq; /* Polling interrupt stuff */
36 unsigned long jstart; /* Jiffies at start */
37 unsigned long recon_tmo; /* How many usecs to wait for reconnection (6th bit) */
38 unsigned int failed:1; /* Failure flag */
39 unsigned wanted:1; /* Parport sharing busy flag */
40 unsigned int dev_no; /* Device number */
41 wait_queue_head_t *waiting;
42 struct Scsi_Host *host;
43 struct list_head list;
44} ppa_struct;
45
46#include "ppa.h"
47
48static unsigned int mode = PPA_AUTODETECT;
49module_param(mode, uint, 0644);
50MODULE_PARM_DESC(mode, "Transfer mode (0 = Autodetect, 1 = SPP 4-bit, "
51 "2 = SPP 8-bit, 3 = EPP 8-bit, 4 = EPP 16-bit, 5 = EPP 32-bit");
52
53static struct scsi_pointer *ppa_scsi_pointer(struct scsi_cmnd *cmd)
54{
55 return scsi_cmd_priv(cmd);
56}
57
58static inline ppa_struct *ppa_dev(struct Scsi_Host *host)
59{
60 return *(ppa_struct **)&host->hostdata;
61}
62
63static DEFINE_SPINLOCK(arbitration_lock);
64
65static void got_it(ppa_struct *dev)
66{
67 dev->base = dev->dev->port->base;
68 if (dev->cur_cmd)
69 ppa_scsi_pointer(dev->cur_cmd)->phase = 1;
70 else
71 wake_up(dev->waiting);
72}
73
74static void ppa_wakeup(void *ref)
75{
76 ppa_struct *dev = (ppa_struct *) ref;
77 unsigned long flags;
78
79 spin_lock_irqsave(&arbitration_lock, flags);
80 if (dev->wanted) {
81 parport_claim(dev->dev);
82 got_it(dev);
83 dev->wanted = 0;
84 }
85 spin_unlock_irqrestore(&arbitration_lock, flags);
86 return;
87}
88
89static int ppa_pb_claim(ppa_struct *dev)
90{
91 unsigned long flags;
92 int res = 1;
93 spin_lock_irqsave(&arbitration_lock, flags);
94 if (parport_claim(dev->dev) == 0) {
95 got_it(dev);
96 res = 0;
97 }
98 dev->wanted = res;
99 spin_unlock_irqrestore(&arbitration_lock, flags);
100 return res;
101}
102
103static void ppa_pb_dismiss(ppa_struct *dev)
104{
105 unsigned long flags;
106 int wanted;
107 spin_lock_irqsave(&arbitration_lock, flags);
108 wanted = dev->wanted;
109 dev->wanted = 0;
110 spin_unlock_irqrestore(&arbitration_lock, flags);
111 if (!wanted)
112 parport_release(dev->dev);
113}
114
115static inline void ppa_pb_release(ppa_struct *dev)
116{
117 parport_release(dev->dev);
118}
119
120/*
121 * Start of Chipset kludges
122 */
123
124/* This is to give the ppa driver a way to modify the timings (and other
125 * parameters) by writing to the /proc/scsi/ppa/0 file.
126 * Very simple method really... (To simple, no error checking :( )
127 * Reason: Kernel hackers HATE having to unload and reload modules for
128 * testing...
129 * Also gives a method to use a script to obtain optimum timings (TODO)
130 */
131
132static inline int ppa_write_info(struct Scsi_Host *host, char *buffer, int length)
133{
134 ppa_struct *dev = ppa_dev(host);
135 unsigned long x;
136
137 if ((length > 5) && (strncmp(buffer, "mode=", 5) == 0)) {
138 x = simple_strtoul(buffer + 5, NULL, 0);
139 dev->mode = x;
140 return length;
141 }
142 if ((length > 10) && (strncmp(buffer, "recon_tmo=", 10) == 0)) {
143 x = simple_strtoul(buffer + 10, NULL, 0);
144 dev->recon_tmo = x;
145 printk(KERN_INFO "ppa: recon_tmo set to %ld\n", x);
146 return length;
147 }
148 printk(KERN_WARNING "ppa /proc: invalid variable\n");
149 return -EINVAL;
150}
151
152static int ppa_show_info(struct seq_file *m, struct Scsi_Host *host)
153{
154 ppa_struct *dev = ppa_dev(host);
155
156 seq_printf(m, "Version : %s\n", PPA_VERSION);
157 seq_printf(m, "Parport : %s\n", dev->dev->port->name);
158 seq_printf(m, "Mode : %s\n", PPA_MODE_STRING[dev->mode]);
159#if PPA_DEBUG > 0
160 seq_printf(m, "recon_tmo : %lu\n", dev->recon_tmo);
161#endif
162 return 0;
163}
164
165static int device_check(ppa_struct *dev, bool autodetect);
166
167#if PPA_DEBUG > 0
168#define ppa_fail(x,y) printk("ppa: ppa_fail(%i) from %s at line %d\n",\
169 y, __func__, __LINE__); ppa_fail_func(x,y);
170static inline void ppa_fail_func(ppa_struct *dev, int error_code)
171#else
172static inline void ppa_fail(ppa_struct *dev, int error_code)
173#endif
174{
175 /* If we fail a device then we trash status / message bytes */
176 if (dev->cur_cmd) {
177 dev->cur_cmd->result = error_code << 16;
178 dev->failed = 1;
179 }
180}
181
182/*
183 * Wait for the high bit to be set.
184 *
185 * In principle, this could be tied to an interrupt, but the adapter
186 * doesn't appear to be designed to support interrupts. We spin on
187 * the 0x80 ready bit.
188 */
189static unsigned char ppa_wait(ppa_struct *dev)
190{
191 int k;
192 unsigned short ppb = dev->base;
193 unsigned char r;
194
195 k = PPA_SPIN_TMO;
196 /* Wait for bit 6 and 7 - PJC */
197 for (r = r_str(ppb); ((r & 0xc0) != 0xc0) && (k); k--) {
198 udelay(1);
199 r = r_str(ppb);
200 }
201
202 /*
203 * return some status information.
204 * Semantics: 0xc0 = ZIP wants more data
205 * 0xd0 = ZIP wants to send more data
206 * 0xe0 = ZIP is expecting SCSI command data
207 * 0xf0 = end of transfer, ZIP is sending status
208 */
209 if (k)
210 return (r & 0xf0);
211
212 /* Counter expired - Time out occurred */
213 ppa_fail(dev, DID_TIME_OUT);
214 printk(KERN_WARNING "ppa timeout in ppa_wait\n");
215 return 0; /* command timed out */
216}
217
218/*
219 * Clear EPP Timeout Bit
220 */
221static inline void epp_reset(unsigned short ppb)
222{
223 int i;
224
225 i = r_str(ppb);
226 w_str(ppb, i);
227 w_str(ppb, i & 0xfe);
228}
229
230/*
231 * Wait for empty ECP fifo (if we are in ECP fifo mode only)
232 */
233static inline void ecp_sync(ppa_struct *dev)
234{
235 int i, ppb_hi = dev->dev->port->base_hi;
236
237 if (ppb_hi == 0)
238 return;
239
240 if ((r_ecr(ppb_hi) & 0xe0) == 0x60) { /* mode 011 == ECP fifo mode */
241 for (i = 0; i < 100; i++) {
242 if (r_ecr(ppb_hi) & 0x01)
243 return;
244 udelay(5);
245 }
246 printk(KERN_WARNING "ppa: ECP sync failed as data still present in FIFO.\n");
247 }
248}
249
250static int ppa_byte_out(unsigned short base, const char *buffer, int len)
251{
252 int i;
253
254 for (i = len; i; i--) {
255 w_dtr(base, *buffer++);
256 w_ctr(base, 0xe);
257 w_ctr(base, 0xc);
258 }
259 return 1; /* All went well - we hope! */
260}
261
262static int ppa_byte_in(unsigned short base, char *buffer, int len)
263{
264 int i;
265
266 for (i = len; i; i--) {
267 *buffer++ = r_dtr(base);
268 w_ctr(base, 0x27);
269 w_ctr(base, 0x25);
270 }
271 return 1; /* All went well - we hope! */
272}
273
274static int ppa_nibble_in(unsigned short base, char *buffer, int len)
275{
276 for (; len; len--) {
277 unsigned char h;
278
279 w_ctr(base, 0x4);
280 h = r_str(base) & 0xf0;
281 w_ctr(base, 0x6);
282 *buffer++ = h | ((r_str(base) & 0xf0) >> 4);
283 }
284 return 1; /* All went well - we hope! */
285}
286
287static int ppa_out(ppa_struct *dev, char *buffer, int len)
288{
289 int r;
290 unsigned short ppb = dev->base;
291
292 r = ppa_wait(dev);
293
294 if ((r & 0x50) != 0x40) {
295 ppa_fail(dev, DID_ERROR);
296 return 0;
297 }
298 switch (dev->mode) {
299 case PPA_NIBBLE:
300 case PPA_PS2:
301 /* 8 bit output, with a loop */
302 r = ppa_byte_out(ppb, buffer, len);
303 break;
304
305 case PPA_EPP_32:
306 case PPA_EPP_16:
307 case PPA_EPP_8:
308 epp_reset(ppb);
309 w_ctr(ppb, 0x4);
310 if (dev->mode == PPA_EPP_32 && !(((long) buffer | len) & 0x03))
311 outsl(ppb + 4, buffer, len >> 2);
312 else if (dev->mode == PPA_EPP_16 && !(((long) buffer | len) & 0x01))
313 outsw(ppb + 4, buffer, len >> 1);
314 else
315 outsb(ppb + 4, buffer, len);
316 w_ctr(ppb, 0xc);
317 r = !(r_str(ppb) & 0x01);
318 w_ctr(ppb, 0xc);
319 ecp_sync(dev);
320 break;
321
322 default:
323 printk(KERN_ERR "PPA: bug in ppa_out()\n");
324 r = 0;
325 }
326 return r;
327}
328
329static int ppa_in(ppa_struct *dev, char *buffer, int len)
330{
331 int r;
332 unsigned short ppb = dev->base;
333
334 r = ppa_wait(dev);
335
336 if ((r & 0x50) != 0x50) {
337 ppa_fail(dev, DID_ERROR);
338 return 0;
339 }
340 switch (dev->mode) {
341 case PPA_NIBBLE:
342 /* 4 bit input, with a loop */
343 r = ppa_nibble_in(ppb, buffer, len);
344 w_ctr(ppb, 0xc);
345 break;
346
347 case PPA_PS2:
348 /* 8 bit input, with a loop */
349 w_ctr(ppb, 0x25);
350 r = ppa_byte_in(ppb, buffer, len);
351 w_ctr(ppb, 0x4);
352 w_ctr(ppb, 0xc);
353 break;
354
355 case PPA_EPP_32:
356 case PPA_EPP_16:
357 case PPA_EPP_8:
358 epp_reset(ppb);
359 w_ctr(ppb, 0x24);
360 if (dev->mode == PPA_EPP_32 && !(((long) buffer | len) & 0x03))
361 insl(ppb + 4, buffer, len >> 2);
362 else if (dev->mode == PPA_EPP_16 && !(((long) buffer | len) & 0x01))
363 insw(ppb + 4, buffer, len >> 1);
364 else
365 insb(ppb + 4, buffer, len);
366 w_ctr(ppb, 0x2c);
367 r = !(r_str(ppb) & 0x01);
368 w_ctr(ppb, 0x2c);
369 ecp_sync(dev);
370 break;
371
372 default:
373 printk(KERN_ERR "PPA: bug in ppa_ins()\n");
374 r = 0;
375 break;
376 }
377 return r;
378}
379
380/* end of ppa_io.h */
381static inline void ppa_d_pulse(unsigned short ppb, unsigned char b)
382{
383 w_dtr(ppb, b);
384 w_ctr(ppb, 0xc);
385 w_ctr(ppb, 0xe);
386 w_ctr(ppb, 0xc);
387 w_ctr(ppb, 0x4);
388 w_ctr(ppb, 0xc);
389}
390
391static void ppa_disconnect(ppa_struct *dev)
392{
393 unsigned short ppb = dev->base;
394
395 ppa_d_pulse(ppb, 0);
396 ppa_d_pulse(ppb, 0x3c);
397 ppa_d_pulse(ppb, 0x20);
398 ppa_d_pulse(ppb, 0xf);
399}
400
401static inline void ppa_c_pulse(unsigned short ppb, unsigned char b)
402{
403 w_dtr(ppb, b);
404 w_ctr(ppb, 0x4);
405 w_ctr(ppb, 0x6);
406 w_ctr(ppb, 0x4);
407 w_ctr(ppb, 0xc);
408}
409
410static inline void ppa_connect(ppa_struct *dev, int flag)
411{
412 unsigned short ppb = dev->base;
413
414 ppa_c_pulse(ppb, 0);
415 ppa_c_pulse(ppb, 0x3c);
416 ppa_c_pulse(ppb, 0x20);
417 if ((flag == CONNECT_EPP_MAYBE) && IN_EPP_MODE(dev->mode))
418 ppa_c_pulse(ppb, 0xcf);
419 else
420 ppa_c_pulse(ppb, 0x8f);
421}
422
423static int ppa_select(ppa_struct *dev, int target)
424{
425 int k;
426 unsigned short ppb = dev->base;
427
428 /*
429 * Bit 6 (0x40) is the device selected bit.
430 * First we must wait till the current device goes off line...
431 */
432 k = PPA_SELECT_TMO;
433 do {
434 k--;
435 udelay(1);
436 } while ((r_str(ppb) & 0x40) && (k));
437 if (!k)
438 return 0;
439
440 w_dtr(ppb, (1 << target));
441 w_ctr(ppb, 0xe);
442 w_ctr(ppb, 0xc);
443 w_dtr(ppb, 0x80); /* This is NOT the initator */
444 w_ctr(ppb, 0x8);
445
446 k = PPA_SELECT_TMO;
447 do {
448 k--;
449 udelay(1);
450 }
451 while (!(r_str(ppb) & 0x40) && (k));
452 if (!k)
453 return 0;
454
455 return 1;
456}
457
458/*
459 * This is based on a trace of what the Iomega DOS 'guest' driver does.
460 * I've tried several different kinds of parallel ports with guest and
461 * coded this to react in the same ways that it does.
462 *
463 * The return value from this function is just a hint about where the
464 * handshaking failed.
465 *
466 */
467static int ppa_init(ppa_struct *dev)
468{
469 int retv;
470 unsigned short ppb = dev->base;
471 bool autodetect = dev->mode == PPA_AUTODETECT;
472
473 if (autodetect) {
474 int modes = dev->dev->port->modes;
475 int ppb_hi = dev->dev->port->base_hi;
476
477 /* Mode detection works up the chain of speed
478 * This avoids a nasty if-then-else-if-... tree
479 */
480 dev->mode = PPA_NIBBLE;
481
482 if (modes & PARPORT_MODE_TRISTATE)
483 dev->mode = PPA_PS2;
484
485 if (modes & PARPORT_MODE_ECP) {
486 w_ecr(ppb_hi, 0x20);
487 dev->mode = PPA_PS2;
488 }
489 if ((modes & PARPORT_MODE_EPP) && (modes & PARPORT_MODE_ECP))
490 w_ecr(ppb_hi, 0x80);
491 }
492
493 ppa_disconnect(dev);
494 ppa_connect(dev, CONNECT_NORMAL);
495
496 retv = 2; /* Failed */
497
498 w_ctr(ppb, 0xe);
499 if ((r_str(ppb) & 0x08) == 0x08)
500 retv--;
501
502 w_ctr(ppb, 0xc);
503 if ((r_str(ppb) & 0x08) == 0x00)
504 retv--;
505
506 if (!retv)
507 ppa_reset_pulse(ppb);
508 udelay(1000); /* Allow devices to settle down */
509 ppa_disconnect(dev);
510 udelay(1000); /* Another delay to allow devices to settle */
511
512 if (retv)
513 return -EIO;
514
515 return device_check(dev, autodetect);
516}
517
518static inline int ppa_send_command(struct scsi_cmnd *cmd)
519{
520 ppa_struct *dev = ppa_dev(cmd->device->host);
521 int k;
522
523 w_ctr(dev->base, 0x0c);
524
525 for (k = 0; k < cmd->cmd_len; k++)
526 if (!ppa_out(dev, &cmd->cmnd[k], 1))
527 return 0;
528 return 1;
529}
530
531/*
532 * The bulk flag enables some optimisations in the data transfer loops,
533 * it should be true for any command that transfers data in integral
534 * numbers of sectors.
535 *
536 * The driver appears to remain stable if we speed up the parallel port
537 * i/o in this function, but not elsewhere.
538 */
539static int ppa_completion(struct scsi_cmnd *const cmd)
540{
541 /* Return codes:
542 * -1 Error
543 * 0 Told to schedule
544 * 1 Finished data transfer
545 */
546 struct scsi_pointer *scsi_pointer = ppa_scsi_pointer(cmd);
547 ppa_struct *dev = ppa_dev(cmd->device->host);
548 unsigned short ppb = dev->base;
549 unsigned long start_jiffies = jiffies;
550
551 unsigned char r, v;
552 int fast, bulk, status;
553
554 v = cmd->cmnd[0];
555 bulk = ((v == READ_6) ||
556 (v == READ_10) || (v == WRITE_6) || (v == WRITE_10));
557
558 /*
559 * We only get here if the drive is ready to comunicate,
560 * hence no need for a full ppa_wait.
561 */
562 r = (r_str(ppb) & 0xf0);
563
564 while (r != (unsigned char) 0xf0) {
565 /*
566 * If we have been running for more than a full timer tick
567 * then take a rest.
568 */
569 if (time_after(jiffies, start_jiffies + 1))
570 return 0;
571
572 if (scsi_pointer->this_residual <= 0) {
573 ppa_fail(dev, DID_ERROR);
574 return -1; /* ERROR_RETURN */
575 }
576
577 /* On some hardware we have SCSI disconnected (6th bit low)
578 * for about 100usecs. It is too expensive to wait a
579 * tick on every loop so we busy wait for no more than
580 * 500usecs to give the drive a chance first. We do not
581 * change things for "normal" hardware since generally
582 * the 6th bit is always high.
583 * This makes the CPU load higher on some hardware
584 * but otherwise we can not get more than 50K/secs
585 * on this problem hardware.
586 */
587 if ((r & 0xc0) != 0xc0) {
588 /* Wait for reconnection should be no more than
589 * jiffy/2 = 5ms = 5000 loops
590 */
591 unsigned long k = dev->recon_tmo;
592 for (; k && ((r = (r_str(ppb) & 0xf0)) & 0xc0) != 0xc0;
593 k--)
594 udelay(1);
595
596 if (!k)
597 return 0;
598 }
599
600 /* determine if we should use burst I/O */
601 fast = bulk && scsi_pointer->this_residual >= PPA_BURST_SIZE ?
602 PPA_BURST_SIZE : 1;
603
604 if (r == (unsigned char) 0xc0)
605 status = ppa_out(dev, scsi_pointer->ptr, fast);
606 else
607 status = ppa_in(dev, scsi_pointer->ptr, fast);
608
609 scsi_pointer->ptr += fast;
610 scsi_pointer->this_residual -= fast;
611
612 if (!status) {
613 ppa_fail(dev, DID_BUS_BUSY);
614 return -1; /* ERROR_RETURN */
615 }
616 if (scsi_pointer->buffer && !scsi_pointer->this_residual) {
617 /* if scatter/gather, advance to the next segment */
618 if (scsi_pointer->buffers_residual--) {
619 scsi_pointer->buffer =
620 sg_next(scsi_pointer->buffer);
621 scsi_pointer->this_residual =
622 scsi_pointer->buffer->length;
623 scsi_pointer->ptr =
624 sg_virt(scsi_pointer->buffer);
625 }
626 }
627 /* Now check to see if the drive is ready to comunicate */
628 r = (r_str(ppb) & 0xf0);
629 /* If not, drop back down to the scheduler and wait a timer tick */
630 if (!(r & 0x80))
631 return 0;
632 }
633 return 1; /* FINISH_RETURN */
634}
635
636/*
637 * Since the PPA itself doesn't generate interrupts, we use
638 * the scheduler's task queue to generate a stream of call-backs and
639 * complete the request when the drive is ready.
640 */
641static void ppa_interrupt(struct work_struct *work)
642{
643 ppa_struct *dev = container_of(work, ppa_struct, ppa_tq.work);
644 struct scsi_cmnd *cmd = dev->cur_cmd;
645
646 if (!cmd) {
647 printk(KERN_ERR "PPA: bug in ppa_interrupt\n");
648 return;
649 }
650 if (ppa_engine(dev, cmd)) {
651 schedule_delayed_work(&dev->ppa_tq, 1);
652 return;
653 }
654 /* Command must of completed hence it is safe to let go... */
655#if PPA_DEBUG > 0
656 switch ((cmd->result >> 16) & 0xff) {
657 case DID_OK:
658 break;
659 case DID_NO_CONNECT:
660 printk(KERN_DEBUG "ppa: no device at SCSI ID %i\n", scmd_id(cmd));
661 break;
662 case DID_BUS_BUSY:
663 printk(KERN_DEBUG "ppa: BUS BUSY - EPP timeout detected\n");
664 break;
665 case DID_TIME_OUT:
666 printk(KERN_DEBUG "ppa: unknown timeout\n");
667 break;
668 case DID_ABORT:
669 printk(KERN_DEBUG "ppa: told to abort\n");
670 break;
671 case DID_PARITY:
672 printk(KERN_DEBUG "ppa: parity error (???)\n");
673 break;
674 case DID_ERROR:
675 printk(KERN_DEBUG "ppa: internal driver error\n");
676 break;
677 case DID_RESET:
678 printk(KERN_DEBUG "ppa: told to reset device\n");
679 break;
680 case DID_BAD_INTR:
681 printk(KERN_WARNING "ppa: bad interrupt (???)\n");
682 break;
683 default:
684 printk(KERN_WARNING "ppa: bad return code (%02x)\n",
685 (cmd->result >> 16) & 0xff);
686 }
687#endif
688
689 if (ppa_scsi_pointer(cmd)->phase > 1)
690 ppa_disconnect(dev);
691
692 ppa_pb_dismiss(dev);
693
694 dev->cur_cmd = NULL;
695
696 scsi_done(cmd);
697}
698
699static int ppa_engine(ppa_struct *dev, struct scsi_cmnd *cmd)
700{
701 struct scsi_pointer *scsi_pointer = ppa_scsi_pointer(cmd);
702 unsigned short ppb = dev->base;
703 unsigned char l = 0, h = 0;
704 int retv;
705
706 /* First check for any errors that may of occurred
707 * Here we check for internal errors
708 */
709 if (dev->failed)
710 return 0;
711
712 switch (scsi_pointer->phase) {
713 case 0: /* Phase 0 - Waiting for parport */
714 if (time_after(jiffies, dev->jstart + HZ)) {
715 /*
716 * We waited more than a second
717 * for parport to call us
718 */
719 ppa_fail(dev, DID_BUS_BUSY);
720 return 0;
721 }
722 return 1; /* wait until ppa_wakeup claims parport */
723 case 1: /* Phase 1 - Connected */
724 { /* Perform a sanity check for cable unplugged */
725 int retv = 2; /* Failed */
726
727 ppa_connect(dev, CONNECT_EPP_MAYBE);
728
729 w_ctr(ppb, 0xe);
730 if ((r_str(ppb) & 0x08) == 0x08)
731 retv--;
732
733 w_ctr(ppb, 0xc);
734 if ((r_str(ppb) & 0x08) == 0x00)
735 retv--;
736
737 if (retv) {
738 if (time_after(jiffies, dev->jstart + (1 * HZ))) {
739 printk(KERN_ERR "ppa: Parallel port cable is unplugged.\n");
740 ppa_fail(dev, DID_BUS_BUSY);
741 return 0;
742 } else {
743 ppa_disconnect(dev);
744 return 1; /* Try again in a jiffy */
745 }
746 }
747 scsi_pointer->phase++;
748 }
749 fallthrough;
750
751 case 2: /* Phase 2 - We are now talking to the scsi bus */
752 if (!ppa_select(dev, scmd_id(cmd))) {
753 ppa_fail(dev, DID_NO_CONNECT);
754 return 0;
755 }
756 scsi_pointer->phase++;
757 fallthrough;
758
759 case 3: /* Phase 3 - Ready to accept a command */
760 w_ctr(ppb, 0x0c);
761 if (!(r_str(ppb) & 0x80))
762 return 1;
763
764 if (!ppa_send_command(cmd))
765 return 0;
766 scsi_pointer->phase++;
767 fallthrough;
768
769 case 4: /* Phase 4 - Setup scatter/gather buffers */
770 if (scsi_bufflen(cmd)) {
771 scsi_pointer->buffer = scsi_sglist(cmd);
772 scsi_pointer->this_residual =
773 scsi_pointer->buffer->length;
774 scsi_pointer->ptr = sg_virt(scsi_pointer->buffer);
775 } else {
776 scsi_pointer->buffer = NULL;
777 scsi_pointer->this_residual = 0;
778 scsi_pointer->ptr = NULL;
779 }
780 scsi_pointer->buffers_residual = scsi_sg_count(cmd) - 1;
781 scsi_pointer->phase++;
782 fallthrough;
783
784 case 5: /* Phase 5 - Data transfer stage */
785 w_ctr(ppb, 0x0c);
786 if (!(r_str(ppb) & 0x80))
787 return 1;
788
789 retv = ppa_completion(cmd);
790 if (retv == -1)
791 return 0;
792 if (retv == 0)
793 return 1;
794 scsi_pointer->phase++;
795 fallthrough;
796
797 case 6: /* Phase 6 - Read status/message */
798 cmd->result = DID_OK << 16;
799 /* Check for data overrun */
800 if (ppa_wait(dev) != (unsigned char) 0xf0) {
801 ppa_fail(dev, DID_ERROR);
802 return 0;
803 }
804 if (ppa_in(dev, &l, 1)) { /* read status byte */
805 /* Check for optional message byte */
806 if (ppa_wait(dev) == (unsigned char) 0xf0)
807 ppa_in(dev, &h, 1);
808 cmd->result =
809 (DID_OK << 16) + (h << 8) + (l & STATUS_MASK);
810 }
811 return 0; /* Finished */
812
813 default:
814 printk(KERN_ERR "ppa: Invalid scsi phase\n");
815 }
816 return 0;
817}
818
819static int ppa_queuecommand_lck(struct scsi_cmnd *cmd)
820{
821 ppa_struct *dev = ppa_dev(cmd->device->host);
822
823 if (dev->cur_cmd) {
824 printk(KERN_ERR "PPA: bug in ppa_queuecommand\n");
825 return 0;
826 }
827 dev->failed = 0;
828 dev->jstart = jiffies;
829 dev->cur_cmd = cmd;
830 cmd->result = DID_ERROR << 16; /* default return code */
831 ppa_scsi_pointer(cmd)->phase = 0; /* bus free */
832
833 schedule_delayed_work(&dev->ppa_tq, 0);
834
835 ppa_pb_claim(dev);
836
837 return 0;
838}
839
840static DEF_SCSI_QCMD(ppa_queuecommand)
841
842/*
843 * Apparently the disk->capacity attribute is off by 1 sector
844 * for all disk drives. We add the one here, but it should really
845 * be done in sd.c. Even if it gets fixed there, this will still
846 * work.
847 */
848static int ppa_biosparam(struct scsi_device *sdev, struct block_device *dev,
849 sector_t capacity, int ip[])
850{
851 ip[0] = 0x40;
852 ip[1] = 0x20;
853 ip[2] = ((unsigned long) capacity + 1) / (ip[0] * ip[1]);
854 if (ip[2] > 1024) {
855 ip[0] = 0xff;
856 ip[1] = 0x3f;
857 ip[2] = ((unsigned long) capacity + 1) / (ip[0] * ip[1]);
858 if (ip[2] > 1023)
859 ip[2] = 1023;
860 }
861 return 0;
862}
863
864static int ppa_abort(struct scsi_cmnd *cmd)
865{
866 ppa_struct *dev = ppa_dev(cmd->device->host);
867 /*
868 * There is no method for aborting commands since Iomega
869 * have tied the SCSI_MESSAGE line high in the interface
870 */
871
872 switch (ppa_scsi_pointer(cmd)->phase) {
873 case 0: /* Do not have access to parport */
874 case 1: /* Have not connected to interface */
875 dev->cur_cmd = NULL; /* Forget the problem */
876 return SUCCESS;
877 default: /* SCSI command sent, can not abort */
878 return FAILED;
879 }
880}
881
882static void ppa_reset_pulse(unsigned int base)
883{
884 w_dtr(base, 0x40);
885 w_ctr(base, 0x8);
886 udelay(30);
887 w_ctr(base, 0xc);
888}
889
890static int ppa_reset(struct scsi_cmnd *cmd)
891{
892 ppa_struct *dev = ppa_dev(cmd->device->host);
893
894 if (ppa_scsi_pointer(cmd)->phase)
895 ppa_disconnect(dev);
896 dev->cur_cmd = NULL; /* Forget the problem */
897
898 ppa_connect(dev, CONNECT_NORMAL);
899 ppa_reset_pulse(dev->base);
900 mdelay(1); /* device settle delay */
901 ppa_disconnect(dev);
902 mdelay(1); /* device settle delay */
903 return SUCCESS;
904}
905
906static int device_check(ppa_struct *dev, bool autodetect)
907{
908 /* This routine looks for a device and then attempts to use EPP
909 to send a command. If all goes as planned then EPP is available. */
910
911 static u8 cmd[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
912 int loop, old_mode, status, k, ppb = dev->base;
913 unsigned char l;
914
915 old_mode = dev->mode;
916 for (loop = 0; loop < 8; loop++) {
917 /* Attempt to use EPP for Test Unit Ready */
918 if (autodetect && (ppb & 0x0007) == 0x0000)
919 dev->mode = PPA_EPP_8;
920
921second_pass:
922 ppa_connect(dev, CONNECT_EPP_MAYBE);
923 /* Select SCSI device */
924 if (!ppa_select(dev, loop)) {
925 ppa_disconnect(dev);
926 continue;
927 }
928 printk(KERN_INFO "ppa: Found device at ID %i, Attempting to use %s\n",
929 loop, PPA_MODE_STRING[dev->mode]);
930
931 /* Send SCSI command */
932 status = 1;
933 w_ctr(ppb, 0x0c);
934 for (l = 0; (l < 6) && (status); l++)
935 status = ppa_out(dev, cmd, 1);
936
937 if (!status) {
938 ppa_disconnect(dev);
939 ppa_connect(dev, CONNECT_EPP_MAYBE);
940 w_dtr(ppb, 0x40);
941 w_ctr(ppb, 0x08);
942 udelay(30);
943 w_ctr(ppb, 0x0c);
944 udelay(1000);
945 ppa_disconnect(dev);
946 udelay(1000);
947 if (dev->mode != old_mode) {
948 dev->mode = old_mode;
949 goto second_pass;
950 }
951 return -EIO;
952 }
953 w_ctr(ppb, 0x0c);
954 k = 1000000; /* 1 Second */
955 do {
956 l = r_str(ppb);
957 k--;
958 udelay(1);
959 } while (!(l & 0x80) && (k));
960
961 l &= 0xf0;
962
963 if (l != 0xf0) {
964 ppa_disconnect(dev);
965 ppa_connect(dev, CONNECT_EPP_MAYBE);
966 ppa_reset_pulse(ppb);
967 udelay(1000);
968 ppa_disconnect(dev);
969 udelay(1000);
970 if (dev->mode != old_mode) {
971 dev->mode = old_mode;
972 goto second_pass;
973 }
974 return -EIO;
975 }
976 ppa_disconnect(dev);
977 printk(KERN_INFO "ppa: Communication established with ID %i using %s\n",
978 loop, PPA_MODE_STRING[dev->mode]);
979 ppa_connect(dev, CONNECT_EPP_MAYBE);
980 ppa_reset_pulse(ppb);
981 udelay(1000);
982 ppa_disconnect(dev);
983 udelay(1000);
984 return 0;
985 }
986 return -ENODEV;
987}
988
989static const struct scsi_host_template ppa_template = {
990 .module = THIS_MODULE,
991 .proc_name = "ppa",
992 .show_info = ppa_show_info,
993 .write_info = ppa_write_info,
994 .name = "Iomega VPI0 (ppa) interface",
995 .queuecommand = ppa_queuecommand,
996 .eh_abort_handler = ppa_abort,
997 .eh_host_reset_handler = ppa_reset,
998 .bios_param = ppa_biosparam,
999 .this_id = -1,
1000 .sg_tablesize = SG_ALL,
1001 .can_queue = 1,
1002 .cmd_size = sizeof(struct scsi_pointer),
1003};
1004
1005/***************************************************************************
1006 * Parallel port probing routines *
1007 ***************************************************************************/
1008
1009static LIST_HEAD(ppa_hosts);
1010
1011/*
1012 * Finds the first available device number that can be alloted to the
1013 * new ppa device and returns the address of the previous node so that
1014 * we can add to the tail and have a list in the ascending order.
1015 */
1016
1017static inline ppa_struct *find_parent(void)
1018{
1019 ppa_struct *dev, *par = NULL;
1020 unsigned int cnt = 0;
1021
1022 if (list_empty(&ppa_hosts))
1023 return NULL;
1024
1025 list_for_each_entry(dev, &ppa_hosts, list) {
1026 if (dev->dev_no != cnt)
1027 return par;
1028 cnt++;
1029 par = dev;
1030 }
1031
1032 return par;
1033}
1034
1035static int __ppa_attach(struct parport *pb)
1036{
1037 struct Scsi_Host *host;
1038 DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waiting);
1039 DEFINE_WAIT(wait);
1040 ppa_struct *dev, *temp;
1041 int ports;
1042 int err = -ENOMEM;
1043 struct pardev_cb ppa_cb;
1044
1045 dev = kzalloc(sizeof(ppa_struct), GFP_KERNEL);
1046 if (!dev)
1047 return -ENOMEM;
1048 dev->base = -1;
1049 dev->mode = mode < PPA_UNKNOWN ? mode : PPA_AUTODETECT;
1050 dev->recon_tmo = PPA_RECON_TMO;
1051 init_waitqueue_head(&waiting);
1052 temp = find_parent();
1053 if (temp)
1054 dev->dev_no = temp->dev_no + 1;
1055
1056 memset(&ppa_cb, 0, sizeof(ppa_cb));
1057 ppa_cb.private = dev;
1058 ppa_cb.wakeup = ppa_wakeup;
1059
1060 dev->dev = parport_register_dev_model(pb, "ppa", &ppa_cb, dev->dev_no);
1061
1062 if (!dev->dev)
1063 goto out;
1064
1065 /* Claim the bus so it remembers what we do to the control
1066 * registers. [ CTR and ECP ]
1067 */
1068 err = -EBUSY;
1069 dev->waiting = &waiting;
1070 prepare_to_wait(&waiting, &wait, TASK_UNINTERRUPTIBLE);
1071 if (ppa_pb_claim(dev))
1072 schedule_timeout(3 * HZ);
1073 if (dev->wanted) {
1074 printk(KERN_ERR "ppa%d: failed to claim parport because "
1075 "a pardevice is owning the port for too long "
1076 "time!\n", pb->number);
1077 ppa_pb_dismiss(dev);
1078 dev->waiting = NULL;
1079 finish_wait(&waiting, &wait);
1080 goto out1;
1081 }
1082 dev->waiting = NULL;
1083 finish_wait(&waiting, &wait);
1084 dev->base = dev->dev->port->base;
1085 w_ctr(dev->base, 0x0c);
1086
1087 /* Done configuration */
1088
1089 err = ppa_init(dev);
1090 ppa_pb_release(dev);
1091
1092 if (err)
1093 goto out1;
1094
1095 /* now the glue ... */
1096 if (dev->mode == PPA_NIBBLE || dev->mode == PPA_PS2)
1097 ports = 3;
1098 else
1099 ports = 8;
1100
1101 INIT_DELAYED_WORK(&dev->ppa_tq, ppa_interrupt);
1102
1103 err = -ENOMEM;
1104 host = scsi_host_alloc(&ppa_template, sizeof(ppa_struct *));
1105 if (!host)
1106 goto out1;
1107 host->no_highmem = true;
1108 host->io_port = pb->base;
1109 host->n_io_port = ports;
1110 host->dma_channel = -1;
1111 host->unique_id = pb->number;
1112 *(ppa_struct **)&host->hostdata = dev;
1113 dev->host = host;
1114 list_add_tail(&dev->list, &ppa_hosts);
1115 err = scsi_add_host(host, NULL);
1116 if (err)
1117 goto out2;
1118 scsi_scan_host(host);
1119 return 0;
1120out2:
1121 list_del_init(&dev->list);
1122 scsi_host_put(host);
1123out1:
1124 parport_unregister_device(dev->dev);
1125out:
1126 kfree(dev);
1127 return err;
1128}
1129
1130static void ppa_attach(struct parport *pb)
1131{
1132 __ppa_attach(pb);
1133}
1134
1135static void ppa_detach(struct parport *pb)
1136{
1137 ppa_struct *dev;
1138 list_for_each_entry(dev, &ppa_hosts, list) {
1139 if (dev->dev->port == pb) {
1140 list_del_init(&dev->list);
1141 scsi_remove_host(dev->host);
1142 scsi_host_put(dev->host);
1143 parport_unregister_device(dev->dev);
1144 kfree(dev);
1145 break;
1146 }
1147 }
1148}
1149
1150static struct parport_driver ppa_driver = {
1151 .name = "ppa",
1152 .match_port = ppa_attach,
1153 .detach = ppa_detach,
1154};
1155module_parport_driver(ppa_driver);
1156
1157MODULE_DESCRIPTION("IOMEGA PPA3 parallel port SCSI host adapter driver");
1158MODULE_LICENSE("GPL");