Loading...
1/*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13/*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46*/
47/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49#include <linux/kernel.h>
50#include <linux/module.h>
51#include <linux/errno.h>
52#include <linux/init.h>
53#include <linux/seq_file.h>
54#include <linux/slab.h>
55#include <linux/types.h>
56#include <linux/pci.h>
57#include <linux/kdev_t.h>
58#include <linux/blkdev.h>
59#include <linux/delay.h>
60#include <linux/interrupt.h> /* needed for in_interrupt() proto */
61#include <linux/dma-mapping.h>
62#include <asm/io.h>
63#ifdef CONFIG_MTRR
64#include <asm/mtrr.h>
65#endif
66#include <linux/kthread.h>
67#include <scsi/scsi_host.h>
68
69#include "mptbase.h"
70#include "lsi/mpi_log_fc.h"
71
72/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
73#define my_NAME "Fusion MPT base driver"
74#define my_VERSION MPT_LINUX_VERSION_COMMON
75#define MYNAM "mptbase"
76
77MODULE_AUTHOR(MODULEAUTHOR);
78MODULE_DESCRIPTION(my_NAME);
79MODULE_LICENSE("GPL");
80MODULE_VERSION(my_VERSION);
81
82/*
83 * cmd line parameters
84 */
85
86static int mpt_msi_enable_spi;
87module_param(mpt_msi_enable_spi, int, 0);
88MODULE_PARM_DESC(mpt_msi_enable_spi,
89 " Enable MSI Support for SPI controllers (default=0)");
90
91static int mpt_msi_enable_fc;
92module_param(mpt_msi_enable_fc, int, 0);
93MODULE_PARM_DESC(mpt_msi_enable_fc,
94 " Enable MSI Support for FC controllers (default=0)");
95
96static int mpt_msi_enable_sas;
97module_param(mpt_msi_enable_sas, int, 0);
98MODULE_PARM_DESC(mpt_msi_enable_sas,
99 " Enable MSI Support for SAS controllers (default=0)");
100
101static int mpt_channel_mapping;
102module_param(mpt_channel_mapping, int, 0);
103MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
104
105static int mpt_debug_level;
106static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
107module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
108 &mpt_debug_level, 0600);
109MODULE_PARM_DESC(mpt_debug_level,
110 " debug level - refer to mptdebug.h - (default=0)");
111
112int mpt_fwfault_debug;
113EXPORT_SYMBOL(mpt_fwfault_debug);
114module_param(mpt_fwfault_debug, int, 0600);
115MODULE_PARM_DESC(mpt_fwfault_debug,
116 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
117
118static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
119 [MPT_MAX_CALLBACKNAME_LEN+1];
120
121#ifdef MFCNT
122static int mfcounter = 0;
123#define PRINT_MF_COUNT 20000
124#endif
125
126/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
127/*
128 * Public data...
129 */
130
131#define WHOINIT_UNKNOWN 0xAA
132
133/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
134/*
135 * Private data...
136 */
137 /* Adapter link list */
138LIST_HEAD(ioc_list);
139 /* Callback lookup table */
140static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
141 /* Protocol driver class lookup table */
142static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
143 /* Event handler lookup table */
144static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
145 /* Reset handler lookup table */
146static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
147static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
148
149#ifdef CONFIG_PROC_FS
150static struct proc_dir_entry *mpt_proc_root_dir;
151#endif
152
153/*
154 * Driver Callback Index's
155 */
156static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
157static u8 last_drv_idx;
158
159/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
160/*
161 * Forward protos...
162 */
163static irqreturn_t mpt_interrupt(int irq, void *bus_id);
164static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
165 MPT_FRAME_HDR *reply);
166static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
167 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
168 int sleepFlag);
169static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
170static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
171static void mpt_adapter_disable(MPT_ADAPTER *ioc);
172static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
173
174static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
175static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
176static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
177static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
178static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
179static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
180static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
181static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
182static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
183static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
184static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
185static int PrimeIocFifos(MPT_ADAPTER *ioc);
186static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
187static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
188static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
189static int GetLanConfigPages(MPT_ADAPTER *ioc);
190static int GetIoUnitPage2(MPT_ADAPTER *ioc);
191int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
192static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
193static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
194static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
195static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
196static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
197static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
198 int sleepFlag);
199static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
200static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
201static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
202
203#ifdef CONFIG_PROC_FS
204static const struct file_operations mpt_summary_proc_fops;
205static const struct file_operations mpt_version_proc_fops;
206static const struct file_operations mpt_iocinfo_proc_fops;
207#endif
208static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
209
210static int ProcessEventNotification(MPT_ADAPTER *ioc,
211 EventNotificationReply_t *evReply, int *evHandlers);
212static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
213static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
214static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
215static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
216static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
217static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
218
219/* module entry point */
220static int __init fusion_init (void);
221static void __exit fusion_exit (void);
222
223#define CHIPREG_READ32(addr) readl_relaxed(addr)
224#define CHIPREG_READ32_dmasync(addr) readl(addr)
225#define CHIPREG_WRITE32(addr,val) writel(val, addr)
226#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
227#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
228
229static void
230pci_disable_io_access(struct pci_dev *pdev)
231{
232 u16 command_reg;
233
234 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
235 command_reg &= ~1;
236 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
237}
238
239static void
240pci_enable_io_access(struct pci_dev *pdev)
241{
242 u16 command_reg;
243
244 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
245 command_reg |= 1;
246 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
247}
248
249static int mpt_set_debug_level(const char *val, struct kernel_param *kp)
250{
251 int ret = param_set_int(val, kp);
252 MPT_ADAPTER *ioc;
253
254 if (ret)
255 return ret;
256
257 list_for_each_entry(ioc, &ioc_list, list)
258 ioc->debug_level = mpt_debug_level;
259 return 0;
260}
261
262/**
263 * mpt_get_cb_idx - obtain cb_idx for registered driver
264 * @dclass: class driver enum
265 *
266 * Returns cb_idx, or zero means it wasn't found
267 **/
268static u8
269mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
270{
271 u8 cb_idx;
272
273 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
274 if (MptDriverClass[cb_idx] == dclass)
275 return cb_idx;
276 return 0;
277}
278
279/**
280 * mpt_is_discovery_complete - determine if discovery has completed
281 * @ioc: per adatper instance
282 *
283 * Returns 1 when discovery completed, else zero.
284 */
285static int
286mpt_is_discovery_complete(MPT_ADAPTER *ioc)
287{
288 ConfigExtendedPageHeader_t hdr;
289 CONFIGPARMS cfg;
290 SasIOUnitPage0_t *buffer;
291 dma_addr_t dma_handle;
292 int rc = 0;
293
294 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
295 memset(&cfg, 0, sizeof(CONFIGPARMS));
296 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
297 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
298 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
299 cfg.cfghdr.ehdr = &hdr;
300 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
301
302 if ((mpt_config(ioc, &cfg)))
303 goto out;
304 if (!hdr.ExtPageLength)
305 goto out;
306
307 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
308 &dma_handle);
309 if (!buffer)
310 goto out;
311
312 cfg.physAddr = dma_handle;
313 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
314
315 if ((mpt_config(ioc, &cfg)))
316 goto out_free_consistent;
317
318 if (!(buffer->PhyData[0].PortFlags &
319 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
320 rc = 1;
321
322 out_free_consistent:
323 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
324 buffer, dma_handle);
325 out:
326 return rc;
327}
328
329
330/**
331 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
332 * @arg: input argument, used to derive ioc
333 *
334 * Return 0 if controller is removed from pci subsystem.
335 * Return -1 for other case.
336 */
337static int mpt_remove_dead_ioc_func(void *arg)
338{
339 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
340 struct pci_dev *pdev;
341
342 if ((ioc == NULL))
343 return -1;
344
345 pdev = ioc->pcidev;
346 if ((pdev == NULL))
347 return -1;
348
349 pci_stop_and_remove_bus_device_locked(pdev);
350 return 0;
351}
352
353
354
355/**
356 * mpt_fault_reset_work - work performed on workq after ioc fault
357 * @work: input argument, used to derive ioc
358 *
359**/
360static void
361mpt_fault_reset_work(struct work_struct *work)
362{
363 MPT_ADAPTER *ioc =
364 container_of(work, MPT_ADAPTER, fault_reset_work.work);
365 u32 ioc_raw_state;
366 int rc;
367 unsigned long flags;
368 MPT_SCSI_HOST *hd;
369 struct task_struct *p;
370
371 if (ioc->ioc_reset_in_progress || !ioc->active)
372 goto out;
373
374
375 ioc_raw_state = mpt_GetIocState(ioc, 0);
376 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
377 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
378 ioc->name, __func__);
379
380 /*
381 * Call mptscsih_flush_pending_cmds callback so that we
382 * flush all pending commands back to OS.
383 * This call is required to aovid deadlock at block layer.
384 * Dead IOC will fail to do diag reset,and this call is safe
385 * since dead ioc will never return any command back from HW.
386 */
387 hd = shost_priv(ioc->sh);
388 ioc->schedule_dead_ioc_flush_running_cmds(hd);
389
390 /*Remove the Dead Host */
391 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
392 "mpt_dead_ioc_%d", ioc->id);
393 if (IS_ERR(p)) {
394 printk(MYIOC_s_ERR_FMT
395 "%s: Running mpt_dead_ioc thread failed !\n",
396 ioc->name, __func__);
397 } else {
398 printk(MYIOC_s_WARN_FMT
399 "%s: Running mpt_dead_ioc thread success !\n",
400 ioc->name, __func__);
401 }
402 return; /* don't rearm timer */
403 }
404
405 if ((ioc_raw_state & MPI_IOC_STATE_MASK)
406 == MPI_IOC_STATE_FAULT) {
407 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
408 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
409 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
410 ioc->name, __func__);
411 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
412 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
413 __func__, (rc == 0) ? "success" : "failed");
414 ioc_raw_state = mpt_GetIocState(ioc, 0);
415 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
416 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
417 "reset (%04xh)\n", ioc->name, ioc_raw_state &
418 MPI_DOORBELL_DATA_MASK);
419 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
420 if ((mpt_is_discovery_complete(ioc))) {
421 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
422 "discovery_quiesce_io flag\n", ioc->name));
423 ioc->sas_discovery_quiesce_io = 0;
424 }
425 }
426
427 out:
428 /*
429 * Take turns polling alternate controller
430 */
431 if (ioc->alt_ioc)
432 ioc = ioc->alt_ioc;
433
434 /* rearm the timer */
435 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
436 if (ioc->reset_work_q)
437 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
438 msecs_to_jiffies(MPT_POLLING_INTERVAL));
439 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
440}
441
442
443/*
444 * Process turbo (context) reply...
445 */
446static void
447mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
448{
449 MPT_FRAME_HDR *mf = NULL;
450 MPT_FRAME_HDR *mr = NULL;
451 u16 req_idx = 0;
452 u8 cb_idx;
453
454 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
455 ioc->name, pa));
456
457 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
458 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
459 req_idx = pa & 0x0000FFFF;
460 cb_idx = (pa & 0x00FF0000) >> 16;
461 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
462 break;
463 case MPI_CONTEXT_REPLY_TYPE_LAN:
464 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
465 /*
466 * Blind set of mf to NULL here was fatal
467 * after lan_reply says "freeme"
468 * Fix sort of combined with an optimization here;
469 * added explicit check for case where lan_reply
470 * was just returning 1 and doing nothing else.
471 * For this case skip the callback, but set up
472 * proper mf value first here:-)
473 */
474 if ((pa & 0x58000000) == 0x58000000) {
475 req_idx = pa & 0x0000FFFF;
476 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
477 mpt_free_msg_frame(ioc, mf);
478 mb();
479 return;
480 break;
481 }
482 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
483 break;
484 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
485 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
486 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
487 break;
488 default:
489 cb_idx = 0;
490 BUG();
491 }
492
493 /* Check for (valid) IO callback! */
494 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
495 MptCallbacks[cb_idx] == NULL) {
496 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
497 __func__, ioc->name, cb_idx);
498 goto out;
499 }
500
501 if (MptCallbacks[cb_idx](ioc, mf, mr))
502 mpt_free_msg_frame(ioc, mf);
503 out:
504 mb();
505}
506
507static void
508mpt_reply(MPT_ADAPTER *ioc, u32 pa)
509{
510 MPT_FRAME_HDR *mf;
511 MPT_FRAME_HDR *mr;
512 u16 req_idx;
513 u8 cb_idx;
514 int freeme;
515
516 u32 reply_dma_low;
517 u16 ioc_stat;
518
519 /* non-TURBO reply! Hmmm, something may be up...
520 * Newest turbo reply mechanism; get address
521 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
522 */
523
524 /* Map DMA address of reply header to cpu address.
525 * pa is 32 bits - but the dma address may be 32 or 64 bits
526 * get offset based only only the low addresses
527 */
528
529 reply_dma_low = (pa <<= 1);
530 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
531 (reply_dma_low - ioc->reply_frames_low_dma));
532
533 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
534 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
535 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
536
537 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
538 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
539 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
540
541 /* Check/log IOC log info
542 */
543 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
544 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
545 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
546 if (ioc->bus_type == FC)
547 mpt_fc_log_info(ioc, log_info);
548 else if (ioc->bus_type == SPI)
549 mpt_spi_log_info(ioc, log_info);
550 else if (ioc->bus_type == SAS)
551 mpt_sas_log_info(ioc, log_info, cb_idx);
552 }
553
554 if (ioc_stat & MPI_IOCSTATUS_MASK)
555 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
556
557 /* Check for (valid) IO callback! */
558 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
559 MptCallbacks[cb_idx] == NULL) {
560 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
561 __func__, ioc->name, cb_idx);
562 freeme = 0;
563 goto out;
564 }
565
566 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
567
568 out:
569 /* Flush (non-TURBO) reply with a WRITE! */
570 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
571
572 if (freeme)
573 mpt_free_msg_frame(ioc, mf);
574 mb();
575}
576
577/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
578/**
579 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
580 * @irq: irq number (not used)
581 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
582 *
583 * This routine is registered via the request_irq() kernel API call,
584 * and handles all interrupts generated from a specific MPT adapter
585 * (also referred to as a IO Controller or IOC).
586 * This routine must clear the interrupt from the adapter and does
587 * so by reading the reply FIFO. Multiple replies may be processed
588 * per single call to this routine.
589 *
590 * This routine handles register-level access of the adapter but
591 * dispatches (calls) a protocol-specific callback routine to handle
592 * the protocol-specific details of the MPT request completion.
593 */
594static irqreturn_t
595mpt_interrupt(int irq, void *bus_id)
596{
597 MPT_ADAPTER *ioc = bus_id;
598 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
599
600 if (pa == 0xFFFFFFFF)
601 return IRQ_NONE;
602
603 /*
604 * Drain the reply FIFO!
605 */
606 do {
607 if (pa & MPI_ADDRESS_REPLY_A_BIT)
608 mpt_reply(ioc, pa);
609 else
610 mpt_turbo_reply(ioc, pa);
611 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
612 } while (pa != 0xFFFFFFFF);
613
614 return IRQ_HANDLED;
615}
616
617/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
618/**
619 * mptbase_reply - MPT base driver's callback routine
620 * @ioc: Pointer to MPT_ADAPTER structure
621 * @req: Pointer to original MPT request frame
622 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
623 *
624 * MPT base driver's callback routine; all base driver
625 * "internal" request/reply processing is routed here.
626 * Currently used for EventNotification and EventAck handling.
627 *
628 * Returns 1 indicating original alloc'd request frame ptr
629 * should be freed, or 0 if it shouldn't.
630 */
631static int
632mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
633{
634 EventNotificationReply_t *pEventReply;
635 u8 event;
636 int evHandlers;
637 int freereq = 1;
638
639 switch (reply->u.hdr.Function) {
640 case MPI_FUNCTION_EVENT_NOTIFICATION:
641 pEventReply = (EventNotificationReply_t *)reply;
642 evHandlers = 0;
643 ProcessEventNotification(ioc, pEventReply, &evHandlers);
644 event = le32_to_cpu(pEventReply->Event) & 0xFF;
645 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
646 freereq = 0;
647 if (event != MPI_EVENT_EVENT_CHANGE)
648 break;
649 case MPI_FUNCTION_CONFIG:
650 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
651 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
652 if (reply) {
653 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
654 memcpy(ioc->mptbase_cmds.reply, reply,
655 min(MPT_DEFAULT_FRAME_SIZE,
656 4 * reply->u.reply.MsgLength));
657 }
658 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
659 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
660 complete(&ioc->mptbase_cmds.done);
661 } else
662 freereq = 0;
663 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
664 freereq = 1;
665 break;
666 case MPI_FUNCTION_EVENT_ACK:
667 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
668 "EventAck reply received\n", ioc->name));
669 break;
670 default:
671 printk(MYIOC_s_ERR_FMT
672 "Unexpected msg function (=%02Xh) reply received!\n",
673 ioc->name, reply->u.hdr.Function);
674 break;
675 }
676
677 /*
678 * Conditionally tell caller to free the original
679 * EventNotification/EventAck/unexpected request frame!
680 */
681 return freereq;
682}
683
684/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
685/**
686 * mpt_register - Register protocol-specific main callback handler.
687 * @cbfunc: callback function pointer
688 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
689 * @func_name: call function's name
690 *
691 * This routine is called by a protocol-specific driver (SCSI host,
692 * LAN, SCSI target) to register its reply callback routine. Each
693 * protocol-specific driver must do this before it will be able to
694 * use any IOC resources, such as obtaining request frames.
695 *
696 * NOTES: The SCSI protocol driver currently calls this routine thrice
697 * in order to register separate callbacks; one for "normal" SCSI IO;
698 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
699 *
700 * Returns u8 valued "handle" in the range (and S.O.D. order)
701 * {N,...,7,6,5,...,1} if successful.
702 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
703 * considered an error by the caller.
704 */
705u8
706mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
707{
708 u8 cb_idx;
709 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
710
711 /*
712 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
713 * (slot/handle 0 is reserved!)
714 */
715 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
716 if (MptCallbacks[cb_idx] == NULL) {
717 MptCallbacks[cb_idx] = cbfunc;
718 MptDriverClass[cb_idx] = dclass;
719 MptEvHandlers[cb_idx] = NULL;
720 last_drv_idx = cb_idx;
721 strlcpy(MptCallbacksName[cb_idx], func_name,
722 MPT_MAX_CALLBACKNAME_LEN+1);
723 break;
724 }
725 }
726
727 return last_drv_idx;
728}
729
730/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
731/**
732 * mpt_deregister - Deregister a protocol drivers resources.
733 * @cb_idx: previously registered callback handle
734 *
735 * Each protocol-specific driver should call this routine when its
736 * module is unloaded.
737 */
738void
739mpt_deregister(u8 cb_idx)
740{
741 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
742 MptCallbacks[cb_idx] = NULL;
743 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
744 MptEvHandlers[cb_idx] = NULL;
745
746 last_drv_idx++;
747 }
748}
749
750/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
751/**
752 * mpt_event_register - Register protocol-specific event callback handler.
753 * @cb_idx: previously registered (via mpt_register) callback handle
754 * @ev_cbfunc: callback function
755 *
756 * This routine can be called by one or more protocol-specific drivers
757 * if/when they choose to be notified of MPT events.
758 *
759 * Returns 0 for success.
760 */
761int
762mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
763{
764 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
765 return -1;
766
767 MptEvHandlers[cb_idx] = ev_cbfunc;
768 return 0;
769}
770
771/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
772/**
773 * mpt_event_deregister - Deregister protocol-specific event callback handler
774 * @cb_idx: previously registered callback handle
775 *
776 * Each protocol-specific driver should call this routine
777 * when it does not (or can no longer) handle events,
778 * or when its module is unloaded.
779 */
780void
781mpt_event_deregister(u8 cb_idx)
782{
783 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
784 return;
785
786 MptEvHandlers[cb_idx] = NULL;
787}
788
789/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
790/**
791 * mpt_reset_register - Register protocol-specific IOC reset handler.
792 * @cb_idx: previously registered (via mpt_register) callback handle
793 * @reset_func: reset function
794 *
795 * This routine can be called by one or more protocol-specific drivers
796 * if/when they choose to be notified of IOC resets.
797 *
798 * Returns 0 for success.
799 */
800int
801mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
802{
803 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
804 return -1;
805
806 MptResetHandlers[cb_idx] = reset_func;
807 return 0;
808}
809
810/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
811/**
812 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
813 * @cb_idx: previously registered callback handle
814 *
815 * Each protocol-specific driver should call this routine
816 * when it does not (or can no longer) handle IOC reset handling,
817 * or when its module is unloaded.
818 */
819void
820mpt_reset_deregister(u8 cb_idx)
821{
822 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
823 return;
824
825 MptResetHandlers[cb_idx] = NULL;
826}
827
828/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
829/**
830 * mpt_device_driver_register - Register device driver hooks
831 * @dd_cbfunc: driver callbacks struct
832 * @cb_idx: MPT protocol driver index
833 */
834int
835mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
836{
837 MPT_ADAPTER *ioc;
838 const struct pci_device_id *id;
839
840 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
841 return -EINVAL;
842
843 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
844
845 /* call per pci device probe entry point */
846 list_for_each_entry(ioc, &ioc_list, list) {
847 id = ioc->pcidev->driver ?
848 ioc->pcidev->driver->id_table : NULL;
849 if (dd_cbfunc->probe)
850 dd_cbfunc->probe(ioc->pcidev, id);
851 }
852
853 return 0;
854}
855
856/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
857/**
858 * mpt_device_driver_deregister - DeRegister device driver hooks
859 * @cb_idx: MPT protocol driver index
860 */
861void
862mpt_device_driver_deregister(u8 cb_idx)
863{
864 struct mpt_pci_driver *dd_cbfunc;
865 MPT_ADAPTER *ioc;
866
867 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
868 return;
869
870 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
871
872 list_for_each_entry(ioc, &ioc_list, list) {
873 if (dd_cbfunc->remove)
874 dd_cbfunc->remove(ioc->pcidev);
875 }
876
877 MptDeviceDriverHandlers[cb_idx] = NULL;
878}
879
880
881/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
882/**
883 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
884 * @cb_idx: Handle of registered MPT protocol driver
885 * @ioc: Pointer to MPT adapter structure
886 *
887 * Obtain an MPT request frame from the pool (of 1024) that are
888 * allocated per MPT adapter.
889 *
890 * Returns pointer to a MPT request frame or %NULL if none are available
891 * or IOC is not active.
892 */
893MPT_FRAME_HDR*
894mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
895{
896 MPT_FRAME_HDR *mf;
897 unsigned long flags;
898 u16 req_idx; /* Request index */
899
900 /* validate handle and ioc identifier */
901
902#ifdef MFCNT
903 if (!ioc->active)
904 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
905 "returning NULL!\n", ioc->name);
906#endif
907
908 /* If interrupts are not attached, do not return a request frame */
909 if (!ioc->active)
910 return NULL;
911
912 spin_lock_irqsave(&ioc->FreeQlock, flags);
913 if (!list_empty(&ioc->FreeQ)) {
914 int req_offset;
915
916 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
917 u.frame.linkage.list);
918 list_del(&mf->u.frame.linkage.list);
919 mf->u.frame.linkage.arg1 = 0;
920 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
921 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
922 /* u16! */
923 req_idx = req_offset / ioc->req_sz;
924 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
925 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
926 /* Default, will be changed if necessary in SG generation */
927 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
928#ifdef MFCNT
929 ioc->mfcnt++;
930#endif
931 }
932 else
933 mf = NULL;
934 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
935
936#ifdef MFCNT
937 if (mf == NULL)
938 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
939 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
940 ioc->req_depth);
941 mfcounter++;
942 if (mfcounter == PRINT_MF_COUNT)
943 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
944 ioc->mfcnt, ioc->req_depth);
945#endif
946
947 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
948 ioc->name, cb_idx, ioc->id, mf));
949 return mf;
950}
951
952/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
953/**
954 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
955 * @cb_idx: Handle of registered MPT protocol driver
956 * @ioc: Pointer to MPT adapter structure
957 * @mf: Pointer to MPT request frame
958 *
959 * This routine posts an MPT request frame to the request post FIFO of a
960 * specific MPT adapter.
961 */
962void
963mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
964{
965 u32 mf_dma_addr;
966 int req_offset;
967 u16 req_idx; /* Request index */
968
969 /* ensure values are reset properly! */
970 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
971 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
972 /* u16! */
973 req_idx = req_offset / ioc->req_sz;
974 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
975 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
976
977 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
978
979 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
980 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
981 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
982 ioc->RequestNB[req_idx]));
983 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
984}
985
986/**
987 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
988 * @cb_idx: Handle of registered MPT protocol driver
989 * @ioc: Pointer to MPT adapter structure
990 * @mf: Pointer to MPT request frame
991 *
992 * Send a protocol-specific MPT request frame to an IOC using
993 * hi-priority request queue.
994 *
995 * This routine posts an MPT request frame to the request post FIFO of a
996 * specific MPT adapter.
997 **/
998void
999mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1000{
1001 u32 mf_dma_addr;
1002 int req_offset;
1003 u16 req_idx; /* Request index */
1004
1005 /* ensure values are reset properly! */
1006 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1007 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
1008 req_idx = req_offset / ioc->req_sz;
1009 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1010 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1011
1012 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1013
1014 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1015 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1016 ioc->name, mf_dma_addr, req_idx));
1017 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1018}
1019
1020/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1021/**
1022 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1023 * @ioc: Pointer to MPT adapter structure
1024 * @mf: Pointer to MPT request frame
1025 *
1026 * This routine places a MPT request frame back on the MPT adapter's
1027 * FreeQ.
1028 */
1029void
1030mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1031{
1032 unsigned long flags;
1033
1034 /* Put Request back on FreeQ! */
1035 spin_lock_irqsave(&ioc->FreeQlock, flags);
1036 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1037 goto out;
1038 /* signature to know if this mf is freed */
1039 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1040 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
1041#ifdef MFCNT
1042 ioc->mfcnt--;
1043#endif
1044 out:
1045 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1046}
1047
1048/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1049/**
1050 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1051 * @pAddr: virtual address for SGE
1052 * @flagslength: SGE flags and data transfer length
1053 * @dma_addr: Physical address
1054 *
1055 * This routine places a MPT request frame back on the MPT adapter's
1056 * FreeQ.
1057 */
1058static void
1059mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1060{
1061 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1062 pSge->FlagsLength = cpu_to_le32(flagslength);
1063 pSge->Address = cpu_to_le32(dma_addr);
1064}
1065
1066/**
1067 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1068 * @pAddr: virtual address for SGE
1069 * @flagslength: SGE flags and data transfer length
1070 * @dma_addr: Physical address
1071 *
1072 * This routine places a MPT request frame back on the MPT adapter's
1073 * FreeQ.
1074 **/
1075static void
1076mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1077{
1078 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1079 pSge->Address.Low = cpu_to_le32
1080 (lower_32_bits(dma_addr));
1081 pSge->Address.High = cpu_to_le32
1082 (upper_32_bits(dma_addr));
1083 pSge->FlagsLength = cpu_to_le32
1084 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1085}
1086
1087/**
1088 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1089 * @pAddr: virtual address for SGE
1090 * @flagslength: SGE flags and data transfer length
1091 * @dma_addr: Physical address
1092 *
1093 * This routine places a MPT request frame back on the MPT adapter's
1094 * FreeQ.
1095 **/
1096static void
1097mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1098{
1099 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1100 u32 tmp;
1101
1102 pSge->Address.Low = cpu_to_le32
1103 (lower_32_bits(dma_addr));
1104 tmp = (u32)(upper_32_bits(dma_addr));
1105
1106 /*
1107 * 1078 errata workaround for the 36GB limitation
1108 */
1109 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1110 flagslength |=
1111 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1112 tmp |= (1<<31);
1113 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1114 printk(KERN_DEBUG "1078 P0M2 addressing for "
1115 "addr = 0x%llx len = %d\n",
1116 (unsigned long long)dma_addr,
1117 MPI_SGE_LENGTH(flagslength));
1118 }
1119
1120 pSge->Address.High = cpu_to_le32(tmp);
1121 pSge->FlagsLength = cpu_to_le32(
1122 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1123}
1124
1125/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1126/**
1127 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1128 * @pAddr: virtual address for SGE
1129 * @next: nextChainOffset value (u32's)
1130 * @length: length of next SGL segment
1131 * @dma_addr: Physical address
1132 *
1133 */
1134static void
1135mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1136{
1137 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1138 pChain->Length = cpu_to_le16(length);
1139 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1140 pChain->NextChainOffset = next;
1141 pChain->Address = cpu_to_le32(dma_addr);
1142}
1143
1144/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1145/**
1146 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1147 * @pAddr: virtual address for SGE
1148 * @next: nextChainOffset value (u32's)
1149 * @length: length of next SGL segment
1150 * @dma_addr: Physical address
1151 *
1152 */
1153static void
1154mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1155{
1156 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1157 u32 tmp = dma_addr & 0xFFFFFFFF;
1158
1159 pChain->Length = cpu_to_le16(length);
1160 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1161 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1162
1163 pChain->NextChainOffset = next;
1164
1165 pChain->Address.Low = cpu_to_le32(tmp);
1166 tmp = (u32)(upper_32_bits(dma_addr));
1167 pChain->Address.High = cpu_to_le32(tmp);
1168}
1169
1170/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1171/**
1172 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1173 * @cb_idx: Handle of registered MPT protocol driver
1174 * @ioc: Pointer to MPT adapter structure
1175 * @reqBytes: Size of the request in bytes
1176 * @req: Pointer to MPT request frame
1177 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1178 *
1179 * This routine is used exclusively to send MptScsiTaskMgmt
1180 * requests since they are required to be sent via doorbell handshake.
1181 *
1182 * NOTE: It is the callers responsibility to byte-swap fields in the
1183 * request which are greater than 1 byte in size.
1184 *
1185 * Returns 0 for success, non-zero for failure.
1186 */
1187int
1188mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1189{
1190 int r = 0;
1191 u8 *req_as_bytes;
1192 int ii;
1193
1194 /* State is known to be good upon entering
1195 * this function so issue the bus reset
1196 * request.
1197 */
1198
1199 /*
1200 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1201 * setting cb_idx/req_idx. But ONLY if this request
1202 * is in proper (pre-alloc'd) request buffer range...
1203 */
1204 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1205 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1206 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1207 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1208 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1209 }
1210
1211 /* Make sure there are no doorbells */
1212 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1213
1214 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1215 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1216 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1217
1218 /* Wait for IOC doorbell int */
1219 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1220 return ii;
1221 }
1222
1223 /* Read doorbell and check for active bit */
1224 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1225 return -5;
1226
1227 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1228 ioc->name, ii));
1229
1230 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1231
1232 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1233 return -2;
1234 }
1235
1236 /* Send request via doorbell handshake */
1237 req_as_bytes = (u8 *) req;
1238 for (ii = 0; ii < reqBytes/4; ii++) {
1239 u32 word;
1240
1241 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1242 (req_as_bytes[(ii*4) + 1] << 8) |
1243 (req_as_bytes[(ii*4) + 2] << 16) |
1244 (req_as_bytes[(ii*4) + 3] << 24));
1245 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1246 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1247 r = -3;
1248 break;
1249 }
1250 }
1251
1252 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1253 r = 0;
1254 else
1255 r = -4;
1256
1257 /* Make sure there are no doorbells */
1258 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1259
1260 return r;
1261}
1262
1263/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1264/**
1265 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1266 * @ioc: Pointer to MPT adapter structure
1267 * @access_control_value: define bits below
1268 * @sleepFlag: Specifies whether the process can sleep
1269 *
1270 * Provides mechanism for the host driver to control the IOC's
1271 * Host Page Buffer access.
1272 *
1273 * Access Control Value - bits[15:12]
1274 * 0h Reserved
1275 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1276 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1277 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1278 *
1279 * Returns 0 for success, non-zero for failure.
1280 */
1281
1282static int
1283mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1284{
1285 int r = 0;
1286
1287 /* return if in use */
1288 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1289 & MPI_DOORBELL_ACTIVE)
1290 return -1;
1291
1292 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1293
1294 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1295 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1296 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1297 (access_control_value<<12)));
1298
1299 /* Wait for IOC to clear Doorbell Status bit */
1300 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1301 return -2;
1302 }else
1303 return 0;
1304}
1305
1306/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1307/**
1308 * mpt_host_page_alloc - allocate system memory for the fw
1309 * @ioc: Pointer to pointer to IOC adapter
1310 * @ioc_init: Pointer to ioc init config page
1311 *
1312 * If we already allocated memory in past, then resend the same pointer.
1313 * Returns 0 for success, non-zero for failure.
1314 */
1315static int
1316mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1317{
1318 char *psge;
1319 int flags_length;
1320 u32 host_page_buffer_sz=0;
1321
1322 if(!ioc->HostPageBuffer) {
1323
1324 host_page_buffer_sz =
1325 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1326
1327 if(!host_page_buffer_sz)
1328 return 0; /* fw doesn't need any host buffers */
1329
1330 /* spin till we get enough memory */
1331 while(host_page_buffer_sz > 0) {
1332
1333 if((ioc->HostPageBuffer = pci_alloc_consistent(
1334 ioc->pcidev,
1335 host_page_buffer_sz,
1336 &ioc->HostPageBuffer_dma)) != NULL) {
1337
1338 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1339 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1340 ioc->name, ioc->HostPageBuffer,
1341 (u32)ioc->HostPageBuffer_dma,
1342 host_page_buffer_sz));
1343 ioc->alloc_total += host_page_buffer_sz;
1344 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1345 break;
1346 }
1347
1348 host_page_buffer_sz -= (4*1024);
1349 }
1350 }
1351
1352 if(!ioc->HostPageBuffer) {
1353 printk(MYIOC_s_ERR_FMT
1354 "Failed to alloc memory for host_page_buffer!\n",
1355 ioc->name);
1356 return -999;
1357 }
1358
1359 psge = (char *)&ioc_init->HostPageBufferSGE;
1360 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1361 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1362 MPI_SGE_FLAGS_HOST_TO_IOC |
1363 MPI_SGE_FLAGS_END_OF_BUFFER;
1364 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1365 flags_length |= ioc->HostPageBuffer_sz;
1366 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1367 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1368
1369return 0;
1370}
1371
1372/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1373/**
1374 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1375 * @iocid: IOC unique identifier (integer)
1376 * @iocpp: Pointer to pointer to IOC adapter
1377 *
1378 * Given a unique IOC identifier, set pointer to the associated MPT
1379 * adapter structure.
1380 *
1381 * Returns iocid and sets iocpp if iocid is found.
1382 * Returns -1 if iocid is not found.
1383 */
1384int
1385mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1386{
1387 MPT_ADAPTER *ioc;
1388
1389 list_for_each_entry(ioc,&ioc_list,list) {
1390 if (ioc->id == iocid) {
1391 *iocpp =ioc;
1392 return iocid;
1393 }
1394 }
1395
1396 *iocpp = NULL;
1397 return -1;
1398}
1399
1400/**
1401 * mpt_get_product_name - returns product string
1402 * @vendor: pci vendor id
1403 * @device: pci device id
1404 * @revision: pci revision id
1405 * @prod_name: string returned
1406 *
1407 * Returns product string displayed when driver loads,
1408 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1409 *
1410 **/
1411static void
1412mpt_get_product_name(u16 vendor, u16 device, u8 revision, char *prod_name)
1413{
1414 char *product_str = NULL;
1415
1416 if (vendor == PCI_VENDOR_ID_BROCADE) {
1417 switch (device)
1418 {
1419 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1420 switch (revision)
1421 {
1422 case 0x00:
1423 product_str = "BRE040 A0";
1424 break;
1425 case 0x01:
1426 product_str = "BRE040 A1";
1427 break;
1428 default:
1429 product_str = "BRE040";
1430 break;
1431 }
1432 break;
1433 }
1434 goto out;
1435 }
1436
1437 switch (device)
1438 {
1439 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1440 product_str = "LSIFC909 B1";
1441 break;
1442 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1443 product_str = "LSIFC919 B0";
1444 break;
1445 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1446 product_str = "LSIFC929 B0";
1447 break;
1448 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1449 if (revision < 0x80)
1450 product_str = "LSIFC919X A0";
1451 else
1452 product_str = "LSIFC919XL A1";
1453 break;
1454 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1455 if (revision < 0x80)
1456 product_str = "LSIFC929X A0";
1457 else
1458 product_str = "LSIFC929XL A1";
1459 break;
1460 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1461 product_str = "LSIFC939X A1";
1462 break;
1463 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1464 product_str = "LSIFC949X A1";
1465 break;
1466 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1467 switch (revision)
1468 {
1469 case 0x00:
1470 product_str = "LSIFC949E A0";
1471 break;
1472 case 0x01:
1473 product_str = "LSIFC949E A1";
1474 break;
1475 default:
1476 product_str = "LSIFC949E";
1477 break;
1478 }
1479 break;
1480 case MPI_MANUFACTPAGE_DEVID_53C1030:
1481 switch (revision)
1482 {
1483 case 0x00:
1484 product_str = "LSI53C1030 A0";
1485 break;
1486 case 0x01:
1487 product_str = "LSI53C1030 B0";
1488 break;
1489 case 0x03:
1490 product_str = "LSI53C1030 B1";
1491 break;
1492 case 0x07:
1493 product_str = "LSI53C1030 B2";
1494 break;
1495 case 0x08:
1496 product_str = "LSI53C1030 C0";
1497 break;
1498 case 0x80:
1499 product_str = "LSI53C1030T A0";
1500 break;
1501 case 0x83:
1502 product_str = "LSI53C1030T A2";
1503 break;
1504 case 0x87:
1505 product_str = "LSI53C1030T A3";
1506 break;
1507 case 0xc1:
1508 product_str = "LSI53C1020A A1";
1509 break;
1510 default:
1511 product_str = "LSI53C1030";
1512 break;
1513 }
1514 break;
1515 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1516 switch (revision)
1517 {
1518 case 0x03:
1519 product_str = "LSI53C1035 A2";
1520 break;
1521 case 0x04:
1522 product_str = "LSI53C1035 B0";
1523 break;
1524 default:
1525 product_str = "LSI53C1035";
1526 break;
1527 }
1528 break;
1529 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1530 switch (revision)
1531 {
1532 case 0x00:
1533 product_str = "LSISAS1064 A1";
1534 break;
1535 case 0x01:
1536 product_str = "LSISAS1064 A2";
1537 break;
1538 case 0x02:
1539 product_str = "LSISAS1064 A3";
1540 break;
1541 case 0x03:
1542 product_str = "LSISAS1064 A4";
1543 break;
1544 default:
1545 product_str = "LSISAS1064";
1546 break;
1547 }
1548 break;
1549 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1550 switch (revision)
1551 {
1552 case 0x00:
1553 product_str = "LSISAS1064E A0";
1554 break;
1555 case 0x01:
1556 product_str = "LSISAS1064E B0";
1557 break;
1558 case 0x02:
1559 product_str = "LSISAS1064E B1";
1560 break;
1561 case 0x04:
1562 product_str = "LSISAS1064E B2";
1563 break;
1564 case 0x08:
1565 product_str = "LSISAS1064E B3";
1566 break;
1567 default:
1568 product_str = "LSISAS1064E";
1569 break;
1570 }
1571 break;
1572 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1573 switch (revision)
1574 {
1575 case 0x00:
1576 product_str = "LSISAS1068 A0";
1577 break;
1578 case 0x01:
1579 product_str = "LSISAS1068 B0";
1580 break;
1581 case 0x02:
1582 product_str = "LSISAS1068 B1";
1583 break;
1584 default:
1585 product_str = "LSISAS1068";
1586 break;
1587 }
1588 break;
1589 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1590 switch (revision)
1591 {
1592 case 0x00:
1593 product_str = "LSISAS1068E A0";
1594 break;
1595 case 0x01:
1596 product_str = "LSISAS1068E B0";
1597 break;
1598 case 0x02:
1599 product_str = "LSISAS1068E B1";
1600 break;
1601 case 0x04:
1602 product_str = "LSISAS1068E B2";
1603 break;
1604 case 0x08:
1605 product_str = "LSISAS1068E B3";
1606 break;
1607 default:
1608 product_str = "LSISAS1068E";
1609 break;
1610 }
1611 break;
1612 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1613 switch (revision)
1614 {
1615 case 0x00:
1616 product_str = "LSISAS1078 A0";
1617 break;
1618 case 0x01:
1619 product_str = "LSISAS1078 B0";
1620 break;
1621 case 0x02:
1622 product_str = "LSISAS1078 C0";
1623 break;
1624 case 0x03:
1625 product_str = "LSISAS1078 C1";
1626 break;
1627 case 0x04:
1628 product_str = "LSISAS1078 C2";
1629 break;
1630 default:
1631 product_str = "LSISAS1078";
1632 break;
1633 }
1634 break;
1635 }
1636
1637 out:
1638 if (product_str)
1639 sprintf(prod_name, "%s", product_str);
1640}
1641
1642/**
1643 * mpt_mapresources - map in memory mapped io
1644 * @ioc: Pointer to pointer to IOC adapter
1645 *
1646 **/
1647static int
1648mpt_mapresources(MPT_ADAPTER *ioc)
1649{
1650 u8 __iomem *mem;
1651 int ii;
1652 resource_size_t mem_phys;
1653 unsigned long port;
1654 u32 msize;
1655 u32 psize;
1656 int r = -ENODEV;
1657 struct pci_dev *pdev;
1658
1659 pdev = ioc->pcidev;
1660 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1661 if (pci_enable_device_mem(pdev)) {
1662 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1663 "failed\n", ioc->name);
1664 return r;
1665 }
1666 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1667 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1668 "MEM failed\n", ioc->name);
1669 goto out_pci_disable_device;
1670 }
1671
1672 if (sizeof(dma_addr_t) > 4) {
1673 const uint64_t required_mask = dma_get_required_mask
1674 (&pdev->dev);
1675 if (required_mask > DMA_BIT_MASK(32)
1676 && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
1677 && !pci_set_consistent_dma_mask(pdev,
1678 DMA_BIT_MASK(64))) {
1679 ioc->dma_mask = DMA_BIT_MASK(64);
1680 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1681 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1682 ioc->name));
1683 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1684 && !pci_set_consistent_dma_mask(pdev,
1685 DMA_BIT_MASK(32))) {
1686 ioc->dma_mask = DMA_BIT_MASK(32);
1687 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1688 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1689 ioc->name));
1690 } else {
1691 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1692 ioc->name, pci_name(pdev));
1693 goto out_pci_release_region;
1694 }
1695 } else {
1696 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1697 && !pci_set_consistent_dma_mask(pdev,
1698 DMA_BIT_MASK(32))) {
1699 ioc->dma_mask = DMA_BIT_MASK(32);
1700 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1701 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1702 ioc->name));
1703 } else {
1704 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1705 ioc->name, pci_name(pdev));
1706 goto out_pci_release_region;
1707 }
1708 }
1709
1710 mem_phys = msize = 0;
1711 port = psize = 0;
1712 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1713 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1714 if (psize)
1715 continue;
1716 /* Get I/O space! */
1717 port = pci_resource_start(pdev, ii);
1718 psize = pci_resource_len(pdev, ii);
1719 } else {
1720 if (msize)
1721 continue;
1722 /* Get memmap */
1723 mem_phys = pci_resource_start(pdev, ii);
1724 msize = pci_resource_len(pdev, ii);
1725 }
1726 }
1727 ioc->mem_size = msize;
1728
1729 mem = NULL;
1730 /* Get logical ptr for PciMem0 space */
1731 /*mem = ioremap(mem_phys, msize);*/
1732 mem = ioremap(mem_phys, msize);
1733 if (mem == NULL) {
1734 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1735 " memory!\n", ioc->name);
1736 r = -EINVAL;
1737 goto out_pci_release_region;
1738 }
1739 ioc->memmap = mem;
1740 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1741 ioc->name, mem, (unsigned long long)mem_phys));
1742
1743 ioc->mem_phys = mem_phys;
1744 ioc->chip = (SYSIF_REGS __iomem *)mem;
1745
1746 /* Save Port IO values in case we need to do downloadboot */
1747 ioc->pio_mem_phys = port;
1748 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1749
1750 return 0;
1751
1752out_pci_release_region:
1753 pci_release_selected_regions(pdev, ioc->bars);
1754out_pci_disable_device:
1755 pci_disable_device(pdev);
1756 return r;
1757}
1758
1759/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1760/**
1761 * mpt_attach - Install a PCI intelligent MPT adapter.
1762 * @pdev: Pointer to pci_dev structure
1763 * @id: PCI device ID information
1764 *
1765 * This routine performs all the steps necessary to bring the IOC of
1766 * a MPT adapter to a OPERATIONAL state. This includes registering
1767 * memory regions, registering the interrupt, and allocating request
1768 * and reply memory pools.
1769 *
1770 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1771 * MPT adapter.
1772 *
1773 * Returns 0 for success, non-zero for failure.
1774 *
1775 * TODO: Add support for polled controllers
1776 */
1777int
1778mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1779{
1780 MPT_ADAPTER *ioc;
1781 u8 cb_idx;
1782 int r = -ENODEV;
1783 u8 pcixcmd;
1784 static int mpt_ids = 0;
1785#ifdef CONFIG_PROC_FS
1786 struct proc_dir_entry *dent;
1787#endif
1788
1789 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
1790 if (ioc == NULL) {
1791 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1792 return -ENOMEM;
1793 }
1794
1795 ioc->id = mpt_ids++;
1796 sprintf(ioc->name, "ioc%d", ioc->id);
1797 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1798
1799 /*
1800 * set initial debug level
1801 * (refer to mptdebug.h)
1802 *
1803 */
1804 ioc->debug_level = mpt_debug_level;
1805 if (mpt_debug_level)
1806 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1807
1808 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1809
1810 ioc->pcidev = pdev;
1811 if (mpt_mapresources(ioc)) {
1812 kfree(ioc);
1813 return r;
1814 }
1815
1816 /*
1817 * Setting up proper handlers for scatter gather handling
1818 */
1819 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1820 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1821 ioc->add_sge = &mpt_add_sge_64bit_1078;
1822 else
1823 ioc->add_sge = &mpt_add_sge_64bit;
1824 ioc->add_chain = &mpt_add_chain_64bit;
1825 ioc->sg_addr_size = 8;
1826 } else {
1827 ioc->add_sge = &mpt_add_sge;
1828 ioc->add_chain = &mpt_add_chain;
1829 ioc->sg_addr_size = 4;
1830 }
1831 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1832
1833 ioc->alloc_total = sizeof(MPT_ADAPTER);
1834 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1835 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1836
1837
1838 spin_lock_init(&ioc->taskmgmt_lock);
1839 mutex_init(&ioc->internal_cmds.mutex);
1840 init_completion(&ioc->internal_cmds.done);
1841 mutex_init(&ioc->mptbase_cmds.mutex);
1842 init_completion(&ioc->mptbase_cmds.done);
1843 mutex_init(&ioc->taskmgmt_cmds.mutex);
1844 init_completion(&ioc->taskmgmt_cmds.done);
1845
1846 /* Initialize the event logging.
1847 */
1848 ioc->eventTypes = 0; /* None */
1849 ioc->eventContext = 0;
1850 ioc->eventLogSize = 0;
1851 ioc->events = NULL;
1852
1853#ifdef MFCNT
1854 ioc->mfcnt = 0;
1855#endif
1856
1857 ioc->sh = NULL;
1858 ioc->cached_fw = NULL;
1859
1860 /* Initialize SCSI Config Data structure
1861 */
1862 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1863
1864 /* Initialize the fc rport list head.
1865 */
1866 INIT_LIST_HEAD(&ioc->fc_rports);
1867
1868 /* Find lookup slot. */
1869 INIT_LIST_HEAD(&ioc->list);
1870
1871
1872 /* Initialize workqueue */
1873 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1874
1875 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
1876 "mpt_poll_%d", ioc->id);
1877 ioc->reset_work_q =
1878 create_singlethread_workqueue(ioc->reset_work_q_name);
1879 if (!ioc->reset_work_q) {
1880 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1881 ioc->name);
1882 pci_release_selected_regions(pdev, ioc->bars);
1883 kfree(ioc);
1884 return -ENOMEM;
1885 }
1886
1887 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1888 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1889
1890 mpt_get_product_name(pdev->vendor, pdev->device, pdev->revision,
1891 ioc->prod_name);
1892
1893 switch (pdev->device)
1894 {
1895 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1896 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1897 ioc->errata_flag_1064 = 1;
1898 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1899 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1900 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1901 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1902 ioc->bus_type = FC;
1903 break;
1904
1905 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1906 if (pdev->revision < XL_929) {
1907 /* 929X Chip Fix. Set Split transactions level
1908 * for PCIX. Set MOST bits to zero.
1909 */
1910 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1911 pcixcmd &= 0x8F;
1912 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1913 } else {
1914 /* 929XL Chip Fix. Set MMRBC to 0x08.
1915 */
1916 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1917 pcixcmd |= 0x08;
1918 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1919 }
1920 ioc->bus_type = FC;
1921 break;
1922
1923 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1924 /* 919X Chip Fix. Set Split transactions level
1925 * for PCIX. Set MOST bits to zero.
1926 */
1927 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1928 pcixcmd &= 0x8F;
1929 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1930 ioc->bus_type = FC;
1931 break;
1932
1933 case MPI_MANUFACTPAGE_DEVID_53C1030:
1934 /* 1030 Chip Fix. Disable Split transactions
1935 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1936 */
1937 if (pdev->revision < C0_1030) {
1938 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1939 pcixcmd &= 0x8F;
1940 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1941 }
1942
1943 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1944 ioc->bus_type = SPI;
1945 break;
1946
1947 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1948 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1949 ioc->errata_flag_1064 = 1;
1950 ioc->bus_type = SAS;
1951 break;
1952
1953 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1954 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1955 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1956 ioc->bus_type = SAS;
1957 break;
1958 }
1959
1960
1961 switch (ioc->bus_type) {
1962
1963 case SAS:
1964 ioc->msi_enable = mpt_msi_enable_sas;
1965 break;
1966
1967 case SPI:
1968 ioc->msi_enable = mpt_msi_enable_spi;
1969 break;
1970
1971 case FC:
1972 ioc->msi_enable = mpt_msi_enable_fc;
1973 break;
1974
1975 default:
1976 ioc->msi_enable = 0;
1977 break;
1978 }
1979
1980 ioc->fw_events_off = 1;
1981
1982 if (ioc->errata_flag_1064)
1983 pci_disable_io_access(pdev);
1984
1985 spin_lock_init(&ioc->FreeQlock);
1986
1987 /* Disable all! */
1988 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1989 ioc->active = 0;
1990 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1991
1992 /* Set IOC ptr in the pcidev's driver data. */
1993 pci_set_drvdata(ioc->pcidev, ioc);
1994
1995 /* Set lookup ptr. */
1996 list_add_tail(&ioc->list, &ioc_list);
1997
1998 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1999 */
2000 mpt_detect_bound_ports(ioc, pdev);
2001
2002 INIT_LIST_HEAD(&ioc->fw_event_list);
2003 spin_lock_init(&ioc->fw_event_lock);
2004 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
2005 ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
2006
2007 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2008 CAN_SLEEP)) != 0){
2009 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
2010 ioc->name, r);
2011
2012 list_del(&ioc->list);
2013 if (ioc->alt_ioc)
2014 ioc->alt_ioc->alt_ioc = NULL;
2015 iounmap(ioc->memmap);
2016 if (r != -5)
2017 pci_release_selected_regions(pdev, ioc->bars);
2018
2019 destroy_workqueue(ioc->reset_work_q);
2020 ioc->reset_work_q = NULL;
2021
2022 kfree(ioc);
2023 pci_set_drvdata(pdev, NULL);
2024 return r;
2025 }
2026
2027 /* call per device driver probe entry point */
2028 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2029 if(MptDeviceDriverHandlers[cb_idx] &&
2030 MptDeviceDriverHandlers[cb_idx]->probe) {
2031 MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
2032 }
2033 }
2034
2035#ifdef CONFIG_PROC_FS
2036 /*
2037 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2038 */
2039 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2040 if (dent) {
2041 proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc);
2042 proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc);
2043 }
2044#endif
2045
2046 if (!ioc->alt_ioc)
2047 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2048 msecs_to_jiffies(MPT_POLLING_INTERVAL));
2049
2050 return 0;
2051}
2052
2053/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2054/**
2055 * mpt_detach - Remove a PCI intelligent MPT adapter.
2056 * @pdev: Pointer to pci_dev structure
2057 */
2058
2059void
2060mpt_detach(struct pci_dev *pdev)
2061{
2062 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2063 char pname[32];
2064 u8 cb_idx;
2065 unsigned long flags;
2066 struct workqueue_struct *wq;
2067
2068 /*
2069 * Stop polling ioc for fault condition
2070 */
2071 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2072 wq = ioc->reset_work_q;
2073 ioc->reset_work_q = NULL;
2074 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2075 cancel_delayed_work(&ioc->fault_reset_work);
2076 destroy_workqueue(wq);
2077
2078 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2079 wq = ioc->fw_event_q;
2080 ioc->fw_event_q = NULL;
2081 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2082 destroy_workqueue(wq);
2083
2084 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2085 remove_proc_entry(pname, NULL);
2086 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2087 remove_proc_entry(pname, NULL);
2088 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2089 remove_proc_entry(pname, NULL);
2090
2091 /* call per device driver remove entry point */
2092 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2093 if(MptDeviceDriverHandlers[cb_idx] &&
2094 MptDeviceDriverHandlers[cb_idx]->remove) {
2095 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2096 }
2097 }
2098
2099 /* Disable interrupts! */
2100 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2101
2102 ioc->active = 0;
2103 synchronize_irq(pdev->irq);
2104
2105 /* Clear any lingering interrupt */
2106 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2107
2108 CHIPREG_READ32(&ioc->chip->IntStatus);
2109
2110 mpt_adapter_dispose(ioc);
2111
2112}
2113
2114/**************************************************************************
2115 * Power Management
2116 */
2117#ifdef CONFIG_PM
2118/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2119/**
2120 * mpt_suspend - Fusion MPT base driver suspend routine.
2121 * @pdev: Pointer to pci_dev structure
2122 * @state: new state to enter
2123 */
2124int
2125mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2126{
2127 u32 device_state;
2128 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2129
2130 device_state = pci_choose_state(pdev, state);
2131 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2132 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2133 device_state);
2134
2135 /* put ioc into READY_STATE */
2136 if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2137 printk(MYIOC_s_ERR_FMT
2138 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2139 }
2140
2141 /* disable interrupts */
2142 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2143 ioc->active = 0;
2144
2145 /* Clear any lingering interrupt */
2146 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2147
2148 free_irq(ioc->pci_irq, ioc);
2149 if (ioc->msi_enable)
2150 pci_disable_msi(ioc->pcidev);
2151 ioc->pci_irq = -1;
2152 pci_save_state(pdev);
2153 pci_disable_device(pdev);
2154 pci_release_selected_regions(pdev, ioc->bars);
2155 pci_set_power_state(pdev, device_state);
2156 return 0;
2157}
2158
2159/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2160/**
2161 * mpt_resume - Fusion MPT base driver resume routine.
2162 * @pdev: Pointer to pci_dev structure
2163 */
2164int
2165mpt_resume(struct pci_dev *pdev)
2166{
2167 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2168 u32 device_state = pdev->current_state;
2169 int recovery_state;
2170 int err;
2171
2172 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2173 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2174 device_state);
2175
2176 pci_set_power_state(pdev, PCI_D0);
2177 pci_enable_wake(pdev, PCI_D0, 0);
2178 pci_restore_state(pdev);
2179 ioc->pcidev = pdev;
2180 err = mpt_mapresources(ioc);
2181 if (err)
2182 return err;
2183
2184 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2185 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2186 ioc->add_sge = &mpt_add_sge_64bit_1078;
2187 else
2188 ioc->add_sge = &mpt_add_sge_64bit;
2189 ioc->add_chain = &mpt_add_chain_64bit;
2190 ioc->sg_addr_size = 8;
2191 } else {
2192
2193 ioc->add_sge = &mpt_add_sge;
2194 ioc->add_chain = &mpt_add_chain;
2195 ioc->sg_addr_size = 4;
2196 }
2197 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2198
2199 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2200 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2201 CHIPREG_READ32(&ioc->chip->Doorbell));
2202
2203 /*
2204 * Errata workaround for SAS pci express:
2205 * Upon returning to the D0 state, the contents of the doorbell will be
2206 * stale data, and this will incorrectly signal to the host driver that
2207 * the firmware is ready to process mpt commands. The workaround is
2208 * to issue a diagnostic reset.
2209 */
2210 if (ioc->bus_type == SAS && (pdev->device ==
2211 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2212 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2213 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2214 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2215 ioc->name);
2216 goto out;
2217 }
2218 }
2219
2220 /* bring ioc to operational state */
2221 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2222 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2223 CAN_SLEEP);
2224 if (recovery_state != 0)
2225 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2226 "error:[%x]\n", ioc->name, recovery_state);
2227 else
2228 printk(MYIOC_s_INFO_FMT
2229 "pci-resume: success\n", ioc->name);
2230 out:
2231 return 0;
2232
2233}
2234#endif
2235
2236static int
2237mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2238{
2239 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2240 ioc->bus_type != SPI) ||
2241 (MptDriverClass[index] == MPTFC_DRIVER &&
2242 ioc->bus_type != FC) ||
2243 (MptDriverClass[index] == MPTSAS_DRIVER &&
2244 ioc->bus_type != SAS))
2245 /* make sure we only call the relevant reset handler
2246 * for the bus */
2247 return 0;
2248 return (MptResetHandlers[index])(ioc, reset_phase);
2249}
2250
2251/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2252/**
2253 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2254 * @ioc: Pointer to MPT adapter structure
2255 * @reason: Event word / reason
2256 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2257 *
2258 * This routine performs all the steps necessary to bring the IOC
2259 * to a OPERATIONAL state.
2260 *
2261 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2262 * MPT adapter.
2263 *
2264 * Returns:
2265 * 0 for success
2266 * -1 if failed to get board READY
2267 * -2 if READY but IOCFacts Failed
2268 * -3 if READY but PrimeIOCFifos Failed
2269 * -4 if READY but IOCInit Failed
2270 * -5 if failed to enable_device and/or request_selected_regions
2271 * -6 if failed to upload firmware
2272 */
2273static int
2274mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2275{
2276 int hard_reset_done = 0;
2277 int alt_ioc_ready = 0;
2278 int hard;
2279 int rc=0;
2280 int ii;
2281 int ret = 0;
2282 int reset_alt_ioc_active = 0;
2283 int irq_allocated = 0;
2284 u8 *a;
2285
2286 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2287 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2288
2289 /* Disable reply interrupts (also blocks FreeQ) */
2290 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2291 ioc->active = 0;
2292
2293 if (ioc->alt_ioc) {
2294 if (ioc->alt_ioc->active ||
2295 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2296 reset_alt_ioc_active = 1;
2297 /* Disable alt-IOC's reply interrupts
2298 * (and FreeQ) for a bit
2299 **/
2300 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2301 0xFFFFFFFF);
2302 ioc->alt_ioc->active = 0;
2303 }
2304 }
2305
2306 hard = 1;
2307 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2308 hard = 0;
2309
2310 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2311 if (hard_reset_done == -4) {
2312 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2313 ioc->name);
2314
2315 if (reset_alt_ioc_active && ioc->alt_ioc) {
2316 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2317 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2318 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2319 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2320 ioc->alt_ioc->active = 1;
2321 }
2322
2323 } else {
2324 printk(MYIOC_s_WARN_FMT
2325 "NOT READY WARNING!\n", ioc->name);
2326 }
2327 ret = -1;
2328 goto out;
2329 }
2330
2331 /* hard_reset_done = 0 if a soft reset was performed
2332 * and 1 if a hard reset was performed.
2333 */
2334 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2335 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2336 alt_ioc_ready = 1;
2337 else
2338 printk(MYIOC_s_WARN_FMT
2339 ": alt-ioc Not ready WARNING!\n",
2340 ioc->alt_ioc->name);
2341 }
2342
2343 for (ii=0; ii<5; ii++) {
2344 /* Get IOC facts! Allow 5 retries */
2345 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2346 break;
2347 }
2348
2349
2350 if (ii == 5) {
2351 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2352 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2353 ret = -2;
2354 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2355 MptDisplayIocCapabilities(ioc);
2356 }
2357
2358 if (alt_ioc_ready) {
2359 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2360 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2361 "Initial Alt IocFacts failed rc=%x\n",
2362 ioc->name, rc));
2363 /* Retry - alt IOC was initialized once
2364 */
2365 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2366 }
2367 if (rc) {
2368 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2369 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2370 alt_ioc_ready = 0;
2371 reset_alt_ioc_active = 0;
2372 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2373 MptDisplayIocCapabilities(ioc->alt_ioc);
2374 }
2375 }
2376
2377 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2378 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2379 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2380 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2381 IORESOURCE_IO);
2382 if (pci_enable_device(ioc->pcidev))
2383 return -5;
2384 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2385 "mpt"))
2386 return -5;
2387 }
2388
2389 /*
2390 * Device is reset now. It must have de-asserted the interrupt line
2391 * (if it was asserted) and it should be safe to register for the
2392 * interrupt now.
2393 */
2394 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2395 ioc->pci_irq = -1;
2396 if (ioc->pcidev->irq) {
2397 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2398 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2399 ioc->name);
2400 else
2401 ioc->msi_enable = 0;
2402 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2403 IRQF_SHARED, ioc->name, ioc);
2404 if (rc < 0) {
2405 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2406 "interrupt %d!\n",
2407 ioc->name, ioc->pcidev->irq);
2408 if (ioc->msi_enable)
2409 pci_disable_msi(ioc->pcidev);
2410 ret = -EBUSY;
2411 goto out;
2412 }
2413 irq_allocated = 1;
2414 ioc->pci_irq = ioc->pcidev->irq;
2415 pci_set_master(ioc->pcidev); /* ?? */
2416 pci_set_drvdata(ioc->pcidev, ioc);
2417 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2418 "installed at interrupt %d\n", ioc->name,
2419 ioc->pcidev->irq));
2420 }
2421 }
2422
2423 /* Prime reply & request queues!
2424 * (mucho alloc's) Must be done prior to
2425 * init as upper addresses are needed for init.
2426 * If fails, continue with alt-ioc processing
2427 */
2428 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2429 ioc->name));
2430 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2431 ret = -3;
2432
2433 /* May need to check/upload firmware & data here!
2434 * If fails, continue with alt-ioc processing
2435 */
2436 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2437 ioc->name));
2438 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2439 ret = -4;
2440// NEW!
2441 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2442 printk(MYIOC_s_WARN_FMT
2443 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2444 ioc->alt_ioc->name, rc);
2445 alt_ioc_ready = 0;
2446 reset_alt_ioc_active = 0;
2447 }
2448
2449 if (alt_ioc_ready) {
2450 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2451 alt_ioc_ready = 0;
2452 reset_alt_ioc_active = 0;
2453 printk(MYIOC_s_WARN_FMT
2454 ": alt-ioc: (%d) init failure WARNING!\n",
2455 ioc->alt_ioc->name, rc);
2456 }
2457 }
2458
2459 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2460 if (ioc->upload_fw) {
2461 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2462 "firmware upload required!\n", ioc->name));
2463
2464 /* Controller is not operational, cannot do upload
2465 */
2466 if (ret == 0) {
2467 rc = mpt_do_upload(ioc, sleepFlag);
2468 if (rc == 0) {
2469 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2470 /*
2471 * Maintain only one pointer to FW memory
2472 * so there will not be two attempt to
2473 * downloadboot onboard dual function
2474 * chips (mpt_adapter_disable,
2475 * mpt_diag_reset)
2476 */
2477 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2478 "mpt_upload: alt_%s has cached_fw=%p \n",
2479 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2480 ioc->cached_fw = NULL;
2481 }
2482 } else {
2483 printk(MYIOC_s_WARN_FMT
2484 "firmware upload failure!\n", ioc->name);
2485 ret = -6;
2486 }
2487 }
2488 }
2489 }
2490
2491 /* Enable MPT base driver management of EventNotification
2492 * and EventAck handling.
2493 */
2494 if ((ret == 0) && (!ioc->facts.EventState)) {
2495 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2496 "SendEventNotification\n",
2497 ioc->name));
2498 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2499 }
2500
2501 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2502 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2503
2504 if (ret == 0) {
2505 /* Enable! (reply interrupt) */
2506 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2507 ioc->active = 1;
2508 }
2509 if (rc == 0) { /* alt ioc */
2510 if (reset_alt_ioc_active && ioc->alt_ioc) {
2511 /* (re)Enable alt-IOC! (reply interrupt) */
2512 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2513 "reply irq re-enabled\n",
2514 ioc->alt_ioc->name));
2515 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2516 MPI_HIM_DIM);
2517 ioc->alt_ioc->active = 1;
2518 }
2519 }
2520
2521
2522 /* Add additional "reason" check before call to GetLanConfigPages
2523 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2524 * recursive scenario; GetLanConfigPages times out, timer expired
2525 * routine calls HardResetHandler, which calls into here again,
2526 * and we try GetLanConfigPages again...
2527 */
2528 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2529
2530 /*
2531 * Initialize link list for inactive raid volumes.
2532 */
2533 mutex_init(&ioc->raid_data.inactive_list_mutex);
2534 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2535
2536 switch (ioc->bus_type) {
2537
2538 case SAS:
2539 /* clear persistency table */
2540 if(ioc->facts.IOCExceptions &
2541 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2542 ret = mptbase_sas_persist_operation(ioc,
2543 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2544 if(ret != 0)
2545 goto out;
2546 }
2547
2548 /* Find IM volumes
2549 */
2550 mpt_findImVolumes(ioc);
2551
2552 /* Check, and possibly reset, the coalescing value
2553 */
2554 mpt_read_ioc_pg_1(ioc);
2555
2556 break;
2557
2558 case FC:
2559 if ((ioc->pfacts[0].ProtocolFlags &
2560 MPI_PORTFACTS_PROTOCOL_LAN) &&
2561 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2562 /*
2563 * Pre-fetch the ports LAN MAC address!
2564 * (LANPage1_t stuff)
2565 */
2566 (void) GetLanConfigPages(ioc);
2567 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2568 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2569 "LanAddr = %02X:%02X:%02X"
2570 ":%02X:%02X:%02X\n",
2571 ioc->name, a[5], a[4],
2572 a[3], a[2], a[1], a[0]));
2573 }
2574 break;
2575
2576 case SPI:
2577 /* Get NVRAM and adapter maximums from SPP 0 and 2
2578 */
2579 mpt_GetScsiPortSettings(ioc, 0);
2580
2581 /* Get version and length of SDP 1
2582 */
2583 mpt_readScsiDevicePageHeaders(ioc, 0);
2584
2585 /* Find IM volumes
2586 */
2587 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2588 mpt_findImVolumes(ioc);
2589
2590 /* Check, and possibly reset, the coalescing value
2591 */
2592 mpt_read_ioc_pg_1(ioc);
2593
2594 mpt_read_ioc_pg_4(ioc);
2595
2596 break;
2597 }
2598
2599 GetIoUnitPage2(ioc);
2600 mpt_get_manufacturing_pg_0(ioc);
2601 }
2602
2603 out:
2604 if ((ret != 0) && irq_allocated) {
2605 free_irq(ioc->pci_irq, ioc);
2606 if (ioc->msi_enable)
2607 pci_disable_msi(ioc->pcidev);
2608 }
2609 return ret;
2610}
2611
2612/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2613/**
2614 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2615 * @ioc: Pointer to MPT adapter structure
2616 * @pdev: Pointer to (struct pci_dev) structure
2617 *
2618 * Search for PCI bus/dev_function which matches
2619 * PCI bus/dev_function (+/-1) for newly discovered 929,
2620 * 929X, 1030 or 1035.
2621 *
2622 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2623 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2624 */
2625static void
2626mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2627{
2628 struct pci_dev *peer=NULL;
2629 unsigned int slot = PCI_SLOT(pdev->devfn);
2630 unsigned int func = PCI_FUNC(pdev->devfn);
2631 MPT_ADAPTER *ioc_srch;
2632
2633 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2634 " searching for devfn match on %x or %x\n",
2635 ioc->name, pci_name(pdev), pdev->bus->number,
2636 pdev->devfn, func-1, func+1));
2637
2638 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2639 if (!peer) {
2640 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2641 if (!peer)
2642 return;
2643 }
2644
2645 list_for_each_entry(ioc_srch, &ioc_list, list) {
2646 struct pci_dev *_pcidev = ioc_srch->pcidev;
2647 if (_pcidev == peer) {
2648 /* Paranoia checks */
2649 if (ioc->alt_ioc != NULL) {
2650 printk(MYIOC_s_WARN_FMT
2651 "Oops, already bound (%s <==> %s)!\n",
2652 ioc->name, ioc->name, ioc->alt_ioc->name);
2653 break;
2654 } else if (ioc_srch->alt_ioc != NULL) {
2655 printk(MYIOC_s_WARN_FMT
2656 "Oops, already bound (%s <==> %s)!\n",
2657 ioc_srch->name, ioc_srch->name,
2658 ioc_srch->alt_ioc->name);
2659 break;
2660 }
2661 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2662 "FOUND! binding %s <==> %s\n",
2663 ioc->name, ioc->name, ioc_srch->name));
2664 ioc_srch->alt_ioc = ioc;
2665 ioc->alt_ioc = ioc_srch;
2666 }
2667 }
2668 pci_dev_put(peer);
2669}
2670
2671/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2672/**
2673 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2674 * @ioc: Pointer to MPT adapter structure
2675 */
2676static void
2677mpt_adapter_disable(MPT_ADAPTER *ioc)
2678{
2679 int sz;
2680 int ret;
2681
2682 if (ioc->cached_fw != NULL) {
2683 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2684 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2685 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2686 ioc->cached_fw, CAN_SLEEP)) < 0) {
2687 printk(MYIOC_s_WARN_FMT
2688 ": firmware downloadboot failure (%d)!\n",
2689 ioc->name, ret);
2690 }
2691 }
2692
2693 /*
2694 * Put the controller into ready state (if its not already)
2695 */
2696 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2697 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2698 CAN_SLEEP)) {
2699 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2700 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2701 "reset failed to put ioc in ready state!\n",
2702 ioc->name, __func__);
2703 } else
2704 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2705 "failed!\n", ioc->name, __func__);
2706 }
2707
2708
2709 /* Disable adapter interrupts! */
2710 synchronize_irq(ioc->pcidev->irq);
2711 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2712 ioc->active = 0;
2713
2714 /* Clear any lingering interrupt */
2715 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2716 CHIPREG_READ32(&ioc->chip->IntStatus);
2717
2718 if (ioc->alloc != NULL) {
2719 sz = ioc->alloc_sz;
2720 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2721 ioc->name, ioc->alloc, ioc->alloc_sz));
2722 pci_free_consistent(ioc->pcidev, sz,
2723 ioc->alloc, ioc->alloc_dma);
2724 ioc->reply_frames = NULL;
2725 ioc->req_frames = NULL;
2726 ioc->alloc = NULL;
2727 ioc->alloc_total -= sz;
2728 }
2729
2730 if (ioc->sense_buf_pool != NULL) {
2731 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2732 pci_free_consistent(ioc->pcidev, sz,
2733 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
2734 ioc->sense_buf_pool = NULL;
2735 ioc->alloc_total -= sz;
2736 }
2737
2738 if (ioc->events != NULL){
2739 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2740 kfree(ioc->events);
2741 ioc->events = NULL;
2742 ioc->alloc_total -= sz;
2743 }
2744
2745 mpt_free_fw_memory(ioc);
2746
2747 kfree(ioc->spi_data.nvram);
2748 mpt_inactive_raid_list_free(ioc);
2749 kfree(ioc->raid_data.pIocPg2);
2750 kfree(ioc->raid_data.pIocPg3);
2751 ioc->spi_data.nvram = NULL;
2752 ioc->raid_data.pIocPg3 = NULL;
2753
2754 if (ioc->spi_data.pIocPg4 != NULL) {
2755 sz = ioc->spi_data.IocPg4Sz;
2756 pci_free_consistent(ioc->pcidev, sz,
2757 ioc->spi_data.pIocPg4,
2758 ioc->spi_data.IocPg4_dma);
2759 ioc->spi_data.pIocPg4 = NULL;
2760 ioc->alloc_total -= sz;
2761 }
2762
2763 if (ioc->ReqToChain != NULL) {
2764 kfree(ioc->ReqToChain);
2765 kfree(ioc->RequestNB);
2766 ioc->ReqToChain = NULL;
2767 }
2768
2769 kfree(ioc->ChainToChain);
2770 ioc->ChainToChain = NULL;
2771
2772 if (ioc->HostPageBuffer != NULL) {
2773 if((ret = mpt_host_page_access_control(ioc,
2774 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2775 printk(MYIOC_s_ERR_FMT
2776 ": %s: host page buffers free failed (%d)!\n",
2777 ioc->name, __func__, ret);
2778 }
2779 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2780 "HostPageBuffer free @ %p, sz=%d bytes\n",
2781 ioc->name, ioc->HostPageBuffer,
2782 ioc->HostPageBuffer_sz));
2783 pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
2784 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2785 ioc->HostPageBuffer = NULL;
2786 ioc->HostPageBuffer_sz = 0;
2787 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2788 }
2789
2790 pci_set_drvdata(ioc->pcidev, NULL);
2791}
2792/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2793/**
2794 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2795 * @ioc: Pointer to MPT adapter structure
2796 *
2797 * This routine unregisters h/w resources and frees all alloc'd memory
2798 * associated with a MPT adapter structure.
2799 */
2800static void
2801mpt_adapter_dispose(MPT_ADAPTER *ioc)
2802{
2803 int sz_first, sz_last;
2804
2805 if (ioc == NULL)
2806 return;
2807
2808 sz_first = ioc->alloc_total;
2809
2810 mpt_adapter_disable(ioc);
2811
2812 if (ioc->pci_irq != -1) {
2813 free_irq(ioc->pci_irq, ioc);
2814 if (ioc->msi_enable)
2815 pci_disable_msi(ioc->pcidev);
2816 ioc->pci_irq = -1;
2817 }
2818
2819 if (ioc->memmap != NULL) {
2820 iounmap(ioc->memmap);
2821 ioc->memmap = NULL;
2822 }
2823
2824 pci_disable_device(ioc->pcidev);
2825 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2826
2827#if defined(CONFIG_MTRR) && 0
2828 if (ioc->mtrr_reg > 0) {
2829 mtrr_del(ioc->mtrr_reg, 0, 0);
2830 dprintk(ioc, printk(MYIOC_s_INFO_FMT "MTRR region de-registered\n", ioc->name));
2831 }
2832#endif
2833
2834 /* Zap the adapter lookup ptr! */
2835 list_del(&ioc->list);
2836
2837 sz_last = ioc->alloc_total;
2838 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2839 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2840
2841 if (ioc->alt_ioc)
2842 ioc->alt_ioc->alt_ioc = NULL;
2843
2844 kfree(ioc);
2845}
2846
2847/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2848/**
2849 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2850 * @ioc: Pointer to MPT adapter structure
2851 */
2852static void
2853MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2854{
2855 int i = 0;
2856
2857 printk(KERN_INFO "%s: ", ioc->name);
2858 if (ioc->prod_name)
2859 printk("%s: ", ioc->prod_name);
2860 printk("Capabilities={");
2861
2862 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2863 printk("Initiator");
2864 i++;
2865 }
2866
2867 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2868 printk("%sTarget", i ? "," : "");
2869 i++;
2870 }
2871
2872 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2873 printk("%sLAN", i ? "," : "");
2874 i++;
2875 }
2876
2877#if 0
2878 /*
2879 * This would probably evoke more questions than it's worth
2880 */
2881 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2882 printk("%sLogBusAddr", i ? "," : "");
2883 i++;
2884 }
2885#endif
2886
2887 printk("}\n");
2888}
2889
2890/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2891/**
2892 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2893 * @ioc: Pointer to MPT_ADAPTER structure
2894 * @force: Force hard KickStart of IOC
2895 * @sleepFlag: Specifies whether the process can sleep
2896 *
2897 * Returns:
2898 * 1 - DIAG reset and READY
2899 * 0 - READY initially OR soft reset and READY
2900 * -1 - Any failure on KickStart
2901 * -2 - Msg Unit Reset Failed
2902 * -3 - IO Unit Reset Failed
2903 * -4 - IOC owned by a PEER
2904 */
2905static int
2906MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2907{
2908 u32 ioc_state;
2909 int statefault = 0;
2910 int cntdn;
2911 int hard_reset_done = 0;
2912 int r;
2913 int ii;
2914 int whoinit;
2915
2916 /* Get current [raw] IOC state */
2917 ioc_state = mpt_GetIocState(ioc, 0);
2918 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2919
2920 /*
2921 * Check to see if IOC got left/stuck in doorbell handshake
2922 * grip of death. If so, hard reset the IOC.
2923 */
2924 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2925 statefault = 1;
2926 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2927 ioc->name);
2928 }
2929
2930 /* Is it already READY? */
2931 if (!statefault &&
2932 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2933 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2934 "IOC is in READY state\n", ioc->name));
2935 return 0;
2936 }
2937
2938 /*
2939 * Check to see if IOC is in FAULT state.
2940 */
2941 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2942 statefault = 2;
2943 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2944 ioc->name);
2945 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2946 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2947 }
2948
2949 /*
2950 * Hmmm... Did it get left operational?
2951 */
2952 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2953 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2954 ioc->name));
2955
2956 /* Check WhoInit.
2957 * If PCI Peer, exit.
2958 * Else, if no fault conditions are present, issue a MessageUnitReset
2959 * Else, fall through to KickStart case
2960 */
2961 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2962 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2963 "whoinit 0x%x statefault %d force %d\n",
2964 ioc->name, whoinit, statefault, force));
2965 if (whoinit == MPI_WHOINIT_PCI_PEER)
2966 return -4;
2967 else {
2968 if ((statefault == 0 ) && (force == 0)) {
2969 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2970 return 0;
2971 }
2972 statefault = 3;
2973 }
2974 }
2975
2976 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2977 if (hard_reset_done < 0)
2978 return -1;
2979
2980 /*
2981 * Loop here waiting for IOC to come READY.
2982 */
2983 ii = 0;
2984 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
2985
2986 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
2987 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
2988 /*
2989 * BIOS or previous driver load left IOC in OP state.
2990 * Reset messaging FIFOs.
2991 */
2992 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
2993 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
2994 return -2;
2995 }
2996 } else if (ioc_state == MPI_IOC_STATE_RESET) {
2997 /*
2998 * Something is wrong. Try to get IOC back
2999 * to a known state.
3000 */
3001 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3002 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3003 return -3;
3004 }
3005 }
3006
3007 ii++; cntdn--;
3008 if (!cntdn) {
3009 printk(MYIOC_s_ERR_FMT
3010 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3011 ioc->name, ioc_state, (int)((ii+5)/HZ));
3012 return -ETIME;
3013 }
3014
3015 if (sleepFlag == CAN_SLEEP) {
3016 msleep(1);
3017 } else {
3018 mdelay (1); /* 1 msec delay */
3019 }
3020
3021 }
3022
3023 if (statefault < 3) {
3024 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3025 statefault == 1 ? "stuck handshake" : "IOC FAULT");
3026 }
3027
3028 return hard_reset_done;
3029}
3030
3031/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3032/**
3033 * mpt_GetIocState - Get the current state of a MPT adapter.
3034 * @ioc: Pointer to MPT_ADAPTER structure
3035 * @cooked: Request raw or cooked IOC state
3036 *
3037 * Returns all IOC Doorbell register bits if cooked==0, else just the
3038 * Doorbell bits in MPI_IOC_STATE_MASK.
3039 */
3040u32
3041mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3042{
3043 u32 s, sc;
3044
3045 /* Get! */
3046 s = CHIPREG_READ32(&ioc->chip->Doorbell);
3047 sc = s & MPI_IOC_STATE_MASK;
3048
3049 /* Save! */
3050 ioc->last_state = sc;
3051
3052 return cooked ? sc : s;
3053}
3054
3055/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3056/**
3057 * GetIocFacts - Send IOCFacts request to MPT adapter.
3058 * @ioc: Pointer to MPT_ADAPTER structure
3059 * @sleepFlag: Specifies whether the process can sleep
3060 * @reason: If recovery, only update facts.
3061 *
3062 * Returns 0 for success, non-zero for failure.
3063 */
3064static int
3065GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3066{
3067 IOCFacts_t get_facts;
3068 IOCFactsReply_t *facts;
3069 int r;
3070 int req_sz;
3071 int reply_sz;
3072 int sz;
3073 u32 status, vv;
3074 u8 shiftFactor=1;
3075
3076 /* IOC *must* NOT be in RESET state! */
3077 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3078 printk(KERN_ERR MYNAM
3079 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3080 ioc->name, ioc->last_state);
3081 return -44;
3082 }
3083
3084 facts = &ioc->facts;
3085
3086 /* Destination (reply area)... */
3087 reply_sz = sizeof(*facts);
3088 memset(facts, 0, reply_sz);
3089
3090 /* Request area (get_facts on the stack right now!) */
3091 req_sz = sizeof(get_facts);
3092 memset(&get_facts, 0, req_sz);
3093
3094 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3095 /* Assert: All other get_facts fields are zero! */
3096
3097 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3098 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3099 ioc->name, req_sz, reply_sz));
3100
3101 /* No non-zero fields in the get_facts request are greater than
3102 * 1 byte in size, so we can just fire it off as is.
3103 */
3104 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3105 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3106 if (r != 0)
3107 return r;
3108
3109 /*
3110 * Now byte swap (GRRR) the necessary fields before any further
3111 * inspection of reply contents.
3112 *
3113 * But need to do some sanity checks on MsgLength (byte) field
3114 * to make sure we don't zero IOC's req_sz!
3115 */
3116 /* Did we get a valid reply? */
3117 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3118 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3119 /*
3120 * If not been here, done that, save off first WhoInit value
3121 */
3122 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3123 ioc->FirstWhoInit = facts->WhoInit;
3124 }
3125
3126 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3127 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3128 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3129 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3130 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3131 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
3132 /* CHECKME! IOCStatus, IOCLogInfo */
3133
3134 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3135 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3136
3137 /*
3138 * FC f/w version changed between 1.1 and 1.2
3139 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3140 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3141 */
3142 if (facts->MsgVersion < MPI_VERSION_01_02) {
3143 /*
3144 * Handle old FC f/w style, convert to new...
3145 */
3146 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3147 facts->FWVersion.Word =
3148 ((oldv<<12) & 0xFF000000) |
3149 ((oldv<<8) & 0x000FFF00);
3150 } else
3151 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3152
3153 facts->ProductID = le16_to_cpu(facts->ProductID);
3154
3155 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3156 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3157 ioc->ir_firmware = 1;
3158
3159 facts->CurrentHostMfaHighAddr =
3160 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3161 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3162 facts->CurrentSenseBufferHighAddr =
3163 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3164 facts->CurReplyFrameSize =
3165 le16_to_cpu(facts->CurReplyFrameSize);
3166 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3167
3168 /*
3169 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3170 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3171 * to 14 in MPI-1.01.0x.
3172 */
3173 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3174 facts->MsgVersion > MPI_VERSION_01_00) {
3175 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3176 }
3177
3178 sz = facts->FWImageSize;
3179 if ( sz & 0x01 )
3180 sz += 1;
3181 if ( sz & 0x02 )
3182 sz += 2;
3183 facts->FWImageSize = sz;
3184
3185 if (!facts->RequestFrameSize) {
3186 /* Something is wrong! */
3187 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3188 ioc->name);
3189 return -55;
3190 }
3191
3192 r = sz = facts->BlockSize;
3193 vv = ((63 / (sz * 4)) + 1) & 0x03;
3194 ioc->NB_for_64_byte_frame = vv;
3195 while ( sz )
3196 {
3197 shiftFactor++;
3198 sz = sz >> 1;
3199 }
3200 ioc->NBShiftFactor = shiftFactor;
3201 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3202 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3203 ioc->name, vv, shiftFactor, r));
3204
3205 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3206 /*
3207 * Set values for this IOC's request & reply frame sizes,
3208 * and request & reply queue depths...
3209 */
3210 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3211 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3212 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3213 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3214
3215 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3216 ioc->name, ioc->reply_sz, ioc->reply_depth));
3217 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3218 ioc->name, ioc->req_sz, ioc->req_depth));
3219
3220 /* Get port facts! */
3221 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3222 return r;
3223 }
3224 } else {
3225 printk(MYIOC_s_ERR_FMT
3226 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3227 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3228 RequestFrameSize)/sizeof(u32)));
3229 return -66;
3230 }
3231
3232 return 0;
3233}
3234
3235/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3236/**
3237 * GetPortFacts - Send PortFacts request to MPT adapter.
3238 * @ioc: Pointer to MPT_ADAPTER structure
3239 * @portnum: Port number
3240 * @sleepFlag: Specifies whether the process can sleep
3241 *
3242 * Returns 0 for success, non-zero for failure.
3243 */
3244static int
3245GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3246{
3247 PortFacts_t get_pfacts;
3248 PortFactsReply_t *pfacts;
3249 int ii;
3250 int req_sz;
3251 int reply_sz;
3252 int max_id;
3253
3254 /* IOC *must* NOT be in RESET state! */
3255 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3256 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3257 ioc->name, ioc->last_state );
3258 return -4;
3259 }
3260
3261 pfacts = &ioc->pfacts[portnum];
3262
3263 /* Destination (reply area)... */
3264 reply_sz = sizeof(*pfacts);
3265 memset(pfacts, 0, reply_sz);
3266
3267 /* Request area (get_pfacts on the stack right now!) */
3268 req_sz = sizeof(get_pfacts);
3269 memset(&get_pfacts, 0, req_sz);
3270
3271 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3272 get_pfacts.PortNumber = portnum;
3273 /* Assert: All other get_pfacts fields are zero! */
3274
3275 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3276 ioc->name, portnum));
3277
3278 /* No non-zero fields in the get_pfacts request are greater than
3279 * 1 byte in size, so we can just fire it off as is.
3280 */
3281 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3282 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3283 if (ii != 0)
3284 return ii;
3285
3286 /* Did we get a valid reply? */
3287
3288 /* Now byte swap the necessary fields in the response. */
3289 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3290 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3291 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3292 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3293 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3294 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3295 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3296 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3297 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3298
3299 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3300 pfacts->MaxDevices;
3301 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3302 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3303
3304 /*
3305 * Place all the devices on channels
3306 *
3307 * (for debuging)
3308 */
3309 if (mpt_channel_mapping) {
3310 ioc->devices_per_bus = 1;
3311 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3312 }
3313
3314 return 0;
3315}
3316
3317/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3318/**
3319 * SendIocInit - Send IOCInit request to MPT adapter.
3320 * @ioc: Pointer to MPT_ADAPTER structure
3321 * @sleepFlag: Specifies whether the process can sleep
3322 *
3323 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3324 *
3325 * Returns 0 for success, non-zero for failure.
3326 */
3327static int
3328SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3329{
3330 IOCInit_t ioc_init;
3331 MPIDefaultReply_t init_reply;
3332 u32 state;
3333 int r;
3334 int count;
3335 int cntdn;
3336
3337 memset(&ioc_init, 0, sizeof(ioc_init));
3338 memset(&init_reply, 0, sizeof(init_reply));
3339
3340 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3341 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3342
3343 /* If we are in a recovery mode and we uploaded the FW image,
3344 * then this pointer is not NULL. Skip the upload a second time.
3345 * Set this flag if cached_fw set for either IOC.
3346 */
3347 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3348 ioc->upload_fw = 1;
3349 else
3350 ioc->upload_fw = 0;
3351 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3352 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3353
3354 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3355 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3356
3357 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3358 ioc->name, ioc->facts.MsgVersion));
3359 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3360 // set MsgVersion and HeaderVersion host driver was built with
3361 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3362 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3363
3364 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3365 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3366 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3367 return -99;
3368 }
3369 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3370
3371 if (ioc->sg_addr_size == sizeof(u64)) {
3372 /* Save the upper 32-bits of the request
3373 * (reply) and sense buffers.
3374 */
3375 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3376 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3377 } else {
3378 /* Force 32-bit addressing */
3379 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3380 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3381 }
3382
3383 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3384 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3385 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3386 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3387
3388 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3389 ioc->name, &ioc_init));
3390
3391 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3392 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3393 if (r != 0) {
3394 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3395 return r;
3396 }
3397
3398 /* No need to byte swap the multibyte fields in the reply
3399 * since we don't even look at its contents.
3400 */
3401
3402 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3403 ioc->name, &ioc_init));
3404
3405 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3406 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3407 return r;
3408 }
3409
3410 /* YIKES! SUPER IMPORTANT!!!
3411 * Poll IocState until _OPERATIONAL while IOC is doing
3412 * LoopInit and TargetDiscovery!
3413 */
3414 count = 0;
3415 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3416 state = mpt_GetIocState(ioc, 1);
3417 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3418 if (sleepFlag == CAN_SLEEP) {
3419 msleep(1);
3420 } else {
3421 mdelay(1);
3422 }
3423
3424 if (!cntdn) {
3425 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3426 ioc->name, (int)((count+5)/HZ));
3427 return -9;
3428 }
3429
3430 state = mpt_GetIocState(ioc, 1);
3431 count++;
3432 }
3433 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3434 ioc->name, count));
3435
3436 ioc->aen_event_read_flag=0;
3437 return r;
3438}
3439
3440/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3441/**
3442 * SendPortEnable - Send PortEnable request to MPT adapter port.
3443 * @ioc: Pointer to MPT_ADAPTER structure
3444 * @portnum: Port number to enable
3445 * @sleepFlag: Specifies whether the process can sleep
3446 *
3447 * Send PortEnable to bring IOC to OPERATIONAL state.
3448 *
3449 * Returns 0 for success, non-zero for failure.
3450 */
3451static int
3452SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3453{
3454 PortEnable_t port_enable;
3455 MPIDefaultReply_t reply_buf;
3456 int rc;
3457 int req_sz;
3458 int reply_sz;
3459
3460 /* Destination... */
3461 reply_sz = sizeof(MPIDefaultReply_t);
3462 memset(&reply_buf, 0, reply_sz);
3463
3464 req_sz = sizeof(PortEnable_t);
3465 memset(&port_enable, 0, req_sz);
3466
3467 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3468 port_enable.PortNumber = portnum;
3469/* port_enable.ChainOffset = 0; */
3470/* port_enable.MsgFlags = 0; */
3471/* port_enable.MsgContext = 0; */
3472
3473 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3474 ioc->name, portnum, &port_enable));
3475
3476 /* RAID FW may take a long time to enable
3477 */
3478 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3479 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3480 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3481 300 /*seconds*/, sleepFlag);
3482 } else {
3483 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3484 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3485 30 /*seconds*/, sleepFlag);
3486 }
3487 return rc;
3488}
3489
3490/**
3491 * mpt_alloc_fw_memory - allocate firmware memory
3492 * @ioc: Pointer to MPT_ADAPTER structure
3493 * @size: total FW bytes
3494 *
3495 * If memory has already been allocated, the same (cached) value
3496 * is returned.
3497 *
3498 * Return 0 if successful, or non-zero for failure
3499 **/
3500int
3501mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3502{
3503 int rc;
3504
3505 if (ioc->cached_fw) {
3506 rc = 0; /* use already allocated memory */
3507 goto out;
3508 }
3509 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3510 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3511 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3512 rc = 0;
3513 goto out;
3514 }
3515 ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
3516 if (!ioc->cached_fw) {
3517 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3518 ioc->name);
3519 rc = -1;
3520 } else {
3521 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3522 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3523 ioc->alloc_total += size;
3524 rc = 0;
3525 }
3526 out:
3527 return rc;
3528}
3529
3530/**
3531 * mpt_free_fw_memory - free firmware memory
3532 * @ioc: Pointer to MPT_ADAPTER structure
3533 *
3534 * If alt_img is NULL, delete from ioc structure.
3535 * Else, delete a secondary image in same format.
3536 **/
3537void
3538mpt_free_fw_memory(MPT_ADAPTER *ioc)
3539{
3540 int sz;
3541
3542 if (!ioc->cached_fw)
3543 return;
3544
3545 sz = ioc->facts.FWImageSize;
3546 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3547 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3548 pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
3549 ioc->alloc_total -= sz;
3550 ioc->cached_fw = NULL;
3551}
3552
3553/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3554/**
3555 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3556 * @ioc: Pointer to MPT_ADAPTER structure
3557 * @sleepFlag: Specifies whether the process can sleep
3558 *
3559 * Returns 0 for success, >0 for handshake failure
3560 * <0 for fw upload failure.
3561 *
3562 * Remark: If bound IOC and a successful FWUpload was performed
3563 * on the bound IOC, the second image is discarded
3564 * and memory is free'd. Both channels must upload to prevent
3565 * IOC from running in degraded mode.
3566 */
3567static int
3568mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3569{
3570 u8 reply[sizeof(FWUploadReply_t)];
3571 FWUpload_t *prequest;
3572 FWUploadReply_t *preply;
3573 FWUploadTCSGE_t *ptcsge;
3574 u32 flagsLength;
3575 int ii, sz, reply_sz;
3576 int cmdStatus;
3577 int request_size;
3578 /* If the image size is 0, we are done.
3579 */
3580 if ((sz = ioc->facts.FWImageSize) == 0)
3581 return 0;
3582
3583 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3584 return -ENOMEM;
3585
3586 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3587 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3588
3589 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3590 kzalloc(ioc->req_sz, GFP_KERNEL);
3591 if (!prequest) {
3592 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3593 "while allocating memory \n", ioc->name));
3594 mpt_free_fw_memory(ioc);
3595 return -ENOMEM;
3596 }
3597
3598 preply = (FWUploadReply_t *)&reply;
3599
3600 reply_sz = sizeof(reply);
3601 memset(preply, 0, reply_sz);
3602
3603 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3604 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3605
3606 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3607 ptcsge->DetailsLength = 12;
3608 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3609 ptcsge->ImageSize = cpu_to_le32(sz);
3610 ptcsge++;
3611
3612 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3613 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3614 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3615 ioc->SGE_size;
3616 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3617 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3618 ioc->facts.FWImageSize, request_size));
3619 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3620
3621 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3622 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3623
3624 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3625 "rc=%x \n", ioc->name, ii));
3626
3627 cmdStatus = -EFAULT;
3628 if (ii == 0) {
3629 /* Handshake transfer was complete and successful.
3630 * Check the Reply Frame.
3631 */
3632 int status;
3633 status = le16_to_cpu(preply->IOCStatus) &
3634 MPI_IOCSTATUS_MASK;
3635 if (status == MPI_IOCSTATUS_SUCCESS &&
3636 ioc->facts.FWImageSize ==
3637 le32_to_cpu(preply->ActualImageSize))
3638 cmdStatus = 0;
3639 }
3640 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3641 ioc->name, cmdStatus));
3642
3643
3644 if (cmdStatus) {
3645 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3646 "freeing image \n", ioc->name));
3647 mpt_free_fw_memory(ioc);
3648 }
3649 kfree(prequest);
3650
3651 return cmdStatus;
3652}
3653
3654/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3655/**
3656 * mpt_downloadboot - DownloadBoot code
3657 * @ioc: Pointer to MPT_ADAPTER structure
3658 * @pFwHeader: Pointer to firmware header info
3659 * @sleepFlag: Specifies whether the process can sleep
3660 *
3661 * FwDownloadBoot requires Programmed IO access.
3662 *
3663 * Returns 0 for success
3664 * -1 FW Image size is 0
3665 * -2 No valid cached_fw Pointer
3666 * <0 for fw upload failure.
3667 */
3668static int
3669mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3670{
3671 MpiExtImageHeader_t *pExtImage;
3672 u32 fwSize;
3673 u32 diag0val;
3674 int count;
3675 u32 *ptrFw;
3676 u32 diagRwData;
3677 u32 nextImage;
3678 u32 load_addr;
3679 u32 ioc_state=0;
3680
3681 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3682 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3683
3684 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3685 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3686 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3687 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3688 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3689 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3690
3691 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3692
3693 /* wait 1 msec */
3694 if (sleepFlag == CAN_SLEEP) {
3695 msleep(1);
3696 } else {
3697 mdelay (1);
3698 }
3699
3700 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3701 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3702
3703 for (count = 0; count < 30; count ++) {
3704 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3705 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3706 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3707 ioc->name, count));
3708 break;
3709 }
3710 /* wait .1 sec */
3711 if (sleepFlag == CAN_SLEEP) {
3712 msleep (100);
3713 } else {
3714 mdelay (100);
3715 }
3716 }
3717
3718 if ( count == 30 ) {
3719 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3720 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3721 ioc->name, diag0val));
3722 return -3;
3723 }
3724
3725 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3726 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3727 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3728 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3729 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3730 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3731
3732 /* Set the DiagRwEn and Disable ARM bits */
3733 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3734
3735 fwSize = (pFwHeader->ImageSize + 3)/4;
3736 ptrFw = (u32 *) pFwHeader;
3737
3738 /* Write the LoadStartAddress to the DiagRw Address Register
3739 * using Programmed IO
3740 */
3741 if (ioc->errata_flag_1064)
3742 pci_enable_io_access(ioc->pcidev);
3743
3744 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3745 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3746 ioc->name, pFwHeader->LoadStartAddress));
3747
3748 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3749 ioc->name, fwSize*4, ptrFw));
3750 while (fwSize--) {
3751 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3752 }
3753
3754 nextImage = pFwHeader->NextImageHeaderOffset;
3755 while (nextImage) {
3756 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3757
3758 load_addr = pExtImage->LoadStartAddress;
3759
3760 fwSize = (pExtImage->ImageSize + 3) >> 2;
3761 ptrFw = (u32 *)pExtImage;
3762
3763 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3764 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3765 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3766
3767 while (fwSize--) {
3768 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3769 }
3770 nextImage = pExtImage->NextImageHeaderOffset;
3771 }
3772
3773 /* Write the IopResetVectorRegAddr */
3774 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3775 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3776
3777 /* Write the IopResetVectorValue */
3778 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3779 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3780
3781 /* Clear the internal flash bad bit - autoincrementing register,
3782 * so must do two writes.
3783 */
3784 if (ioc->bus_type == SPI) {
3785 /*
3786 * 1030 and 1035 H/W errata, workaround to access
3787 * the ClearFlashBadSignatureBit
3788 */
3789 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3790 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3791 diagRwData |= 0x40000000;
3792 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3793 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3794
3795 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3796 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3797 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3798 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3799
3800 /* wait 1 msec */
3801 if (sleepFlag == CAN_SLEEP) {
3802 msleep (1);
3803 } else {
3804 mdelay (1);
3805 }
3806 }
3807
3808 if (ioc->errata_flag_1064)
3809 pci_disable_io_access(ioc->pcidev);
3810
3811 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3812 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3813 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3814 ioc->name, diag0val));
3815 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3816 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3817 ioc->name, diag0val));
3818 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3819
3820 /* Write 0xFF to reset the sequencer */
3821 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3822
3823 if (ioc->bus_type == SAS) {
3824 ioc_state = mpt_GetIocState(ioc, 0);
3825 if ( (GetIocFacts(ioc, sleepFlag,
3826 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3827 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3828 ioc->name, ioc_state));
3829 return -EFAULT;
3830 }
3831 }
3832
3833 for (count=0; count<HZ*20; count++) {
3834 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3835 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3836 "downloadboot successful! (count=%d) IocState=%x\n",
3837 ioc->name, count, ioc_state));
3838 if (ioc->bus_type == SAS) {
3839 return 0;
3840 }
3841 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3842 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3843 "downloadboot: SendIocInit failed\n",
3844 ioc->name));
3845 return -EFAULT;
3846 }
3847 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3848 "downloadboot: SendIocInit successful\n",
3849 ioc->name));
3850 return 0;
3851 }
3852 if (sleepFlag == CAN_SLEEP) {
3853 msleep (10);
3854 } else {
3855 mdelay (10);
3856 }
3857 }
3858 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3859 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3860 return -EFAULT;
3861}
3862
3863/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3864/**
3865 * KickStart - Perform hard reset of MPT adapter.
3866 * @ioc: Pointer to MPT_ADAPTER structure
3867 * @force: Force hard reset
3868 * @sleepFlag: Specifies whether the process can sleep
3869 *
3870 * This routine places MPT adapter in diagnostic mode via the
3871 * WriteSequence register, and then performs a hard reset of adapter
3872 * via the Diagnostic register.
3873 *
3874 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3875 * or NO_SLEEP (interrupt thread, use mdelay)
3876 * force - 1 if doorbell active, board fault state
3877 * board operational, IOC_RECOVERY or
3878 * IOC_BRINGUP and there is an alt_ioc.
3879 * 0 else
3880 *
3881 * Returns:
3882 * 1 - hard reset, READY
3883 * 0 - no reset due to History bit, READY
3884 * -1 - no reset due to History bit but not READY
3885 * OR reset but failed to come READY
3886 * -2 - no reset, could not enter DIAG mode
3887 * -3 - reset but bad FW bit
3888 */
3889static int
3890KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3891{
3892 int hard_reset_done = 0;
3893 u32 ioc_state=0;
3894 int cnt,cntdn;
3895
3896 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3897 if (ioc->bus_type == SPI) {
3898 /* Always issue a Msg Unit Reset first. This will clear some
3899 * SCSI bus hang conditions.
3900 */
3901 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3902
3903 if (sleepFlag == CAN_SLEEP) {
3904 msleep (1000);
3905 } else {
3906 mdelay (1000);
3907 }
3908 }
3909
3910 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3911 if (hard_reset_done < 0)
3912 return hard_reset_done;
3913
3914 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3915 ioc->name));
3916
3917 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3918 for (cnt=0; cnt<cntdn; cnt++) {
3919 ioc_state = mpt_GetIocState(ioc, 1);
3920 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3921 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3922 ioc->name, cnt));
3923 return hard_reset_done;
3924 }
3925 if (sleepFlag == CAN_SLEEP) {
3926 msleep (10);
3927 } else {
3928 mdelay (10);
3929 }
3930 }
3931
3932 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3933 ioc->name, mpt_GetIocState(ioc, 0)));
3934 return -1;
3935}
3936
3937/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3938/**
3939 * mpt_diag_reset - Perform hard reset of the adapter.
3940 * @ioc: Pointer to MPT_ADAPTER structure
3941 * @ignore: Set if to honor and clear to ignore
3942 * the reset history bit
3943 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3944 * else set to NO_SLEEP (use mdelay instead)
3945 *
3946 * This routine places the adapter in diagnostic mode via the
3947 * WriteSequence register and then performs a hard reset of adapter
3948 * via the Diagnostic register. Adapter should be in ready state
3949 * upon successful completion.
3950 *
3951 * Returns: 1 hard reset successful
3952 * 0 no reset performed because reset history bit set
3953 * -2 enabling diagnostic mode failed
3954 * -3 diagnostic reset failed
3955 */
3956static int
3957mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3958{
3959 u32 diag0val;
3960 u32 doorbell;
3961 int hard_reset_done = 0;
3962 int count = 0;
3963 u32 diag1val = 0;
3964 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3965 u8 cb_idx;
3966
3967 /* Clear any existing interrupts */
3968 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3969
3970 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3971
3972 if (!ignore)
3973 return 0;
3974
3975 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3976 "address=%p\n", ioc->name, __func__,
3977 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3978 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3979 if (sleepFlag == CAN_SLEEP)
3980 msleep(1);
3981 else
3982 mdelay(1);
3983
3984 /*
3985 * Call each currently registered protocol IOC reset handler
3986 * with pre-reset indication.
3987 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3988 * MptResetHandlers[] registered yet.
3989 */
3990 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
3991 if (MptResetHandlers[cb_idx])
3992 (*(MptResetHandlers[cb_idx]))(ioc,
3993 MPT_IOC_PRE_RESET);
3994 }
3995
3996 for (count = 0; count < 60; count ++) {
3997 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
3998 doorbell &= MPI_IOC_STATE_MASK;
3999
4000 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4001 "looking for READY STATE: doorbell=%x"
4002 " count=%d\n",
4003 ioc->name, doorbell, count));
4004
4005 if (doorbell == MPI_IOC_STATE_READY) {
4006 return 1;
4007 }
4008
4009 /* wait 1 sec */
4010 if (sleepFlag == CAN_SLEEP)
4011 msleep(1000);
4012 else
4013 mdelay(1000);
4014 }
4015 return -1;
4016 }
4017
4018 /* Use "Diagnostic reset" method! (only thing available!) */
4019 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4020
4021 if (ioc->debug_level & MPT_DEBUG) {
4022 if (ioc->alt_ioc)
4023 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4024 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4025 ioc->name, diag0val, diag1val));
4026 }
4027
4028 /* Do the reset if we are told to ignore the reset history
4029 * or if the reset history is 0
4030 */
4031 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4032 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4033 /* Write magic sequence to WriteSequence register
4034 * Loop until in diagnostic mode
4035 */
4036 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4037 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4038 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4039 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4040 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4041 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4042
4043 /* wait 100 msec */
4044 if (sleepFlag == CAN_SLEEP) {
4045 msleep (100);
4046 } else {
4047 mdelay (100);
4048 }
4049
4050 count++;
4051 if (count > 20) {
4052 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4053 ioc->name, diag0val);
4054 return -2;
4055
4056 }
4057
4058 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4059
4060 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4061 ioc->name, diag0val));
4062 }
4063
4064 if (ioc->debug_level & MPT_DEBUG) {
4065 if (ioc->alt_ioc)
4066 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4067 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4068 ioc->name, diag0val, diag1val));
4069 }
4070 /*
4071 * Disable the ARM (Bug fix)
4072 *
4073 */
4074 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4075 mdelay(1);
4076
4077 /*
4078 * Now hit the reset bit in the Diagnostic register
4079 * (THE BIG HAMMER!) (Clears DRWE bit).
4080 */
4081 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4082 hard_reset_done = 1;
4083 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4084 ioc->name));
4085
4086 /*
4087 * Call each currently registered protocol IOC reset handler
4088 * with pre-reset indication.
4089 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4090 * MptResetHandlers[] registered yet.
4091 */
4092 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4093 if (MptResetHandlers[cb_idx]) {
4094 mpt_signal_reset(cb_idx,
4095 ioc, MPT_IOC_PRE_RESET);
4096 if (ioc->alt_ioc) {
4097 mpt_signal_reset(cb_idx,
4098 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4099 }
4100 }
4101 }
4102
4103 if (ioc->cached_fw)
4104 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4105 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4106 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4107 else
4108 cached_fw = NULL;
4109 if (cached_fw) {
4110 /* If the DownloadBoot operation fails, the
4111 * IOC will be left unusable. This is a fatal error
4112 * case. _diag_reset will return < 0
4113 */
4114 for (count = 0; count < 30; count ++) {
4115 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4116 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4117 break;
4118 }
4119
4120 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4121 ioc->name, diag0val, count));
4122 /* wait 1 sec */
4123 if (sleepFlag == CAN_SLEEP) {
4124 msleep (1000);
4125 } else {
4126 mdelay (1000);
4127 }
4128 }
4129 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4130 printk(MYIOC_s_WARN_FMT
4131 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4132 }
4133
4134 } else {
4135 /* Wait for FW to reload and for board
4136 * to go to the READY state.
4137 * Maximum wait is 60 seconds.
4138 * If fail, no error will check again
4139 * with calling program.
4140 */
4141 for (count = 0; count < 60; count ++) {
4142 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4143 doorbell &= MPI_IOC_STATE_MASK;
4144
4145 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4146 "looking for READY STATE: doorbell=%x"
4147 " count=%d\n", ioc->name, doorbell, count));
4148
4149 if (doorbell == MPI_IOC_STATE_READY) {
4150 break;
4151 }
4152
4153 /* wait 1 sec */
4154 if (sleepFlag == CAN_SLEEP) {
4155 msleep (1000);
4156 } else {
4157 mdelay (1000);
4158 }
4159 }
4160
4161 if (doorbell != MPI_IOC_STATE_READY)
4162 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4163 "after reset! IocState=%x", ioc->name,
4164 doorbell);
4165 }
4166 }
4167
4168 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4169 if (ioc->debug_level & MPT_DEBUG) {
4170 if (ioc->alt_ioc)
4171 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4172 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4173 ioc->name, diag0val, diag1val));
4174 }
4175
4176 /* Clear RESET_HISTORY bit! Place board in the
4177 * diagnostic mode to update the diag register.
4178 */
4179 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4180 count = 0;
4181 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4182 /* Write magic sequence to WriteSequence register
4183 * Loop until in diagnostic mode
4184 */
4185 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4186 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4187 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4188 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4189 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4190 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4191
4192 /* wait 100 msec */
4193 if (sleepFlag == CAN_SLEEP) {
4194 msleep (100);
4195 } else {
4196 mdelay (100);
4197 }
4198
4199 count++;
4200 if (count > 20) {
4201 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4202 ioc->name, diag0val);
4203 break;
4204 }
4205 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4206 }
4207 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4208 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4209 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4210 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4211 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4212 ioc->name);
4213 }
4214
4215 /* Disable Diagnostic Mode
4216 */
4217 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4218
4219 /* Check FW reload status flags.
4220 */
4221 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4222 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4223 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4224 ioc->name, diag0val);
4225 return -3;
4226 }
4227
4228 if (ioc->debug_level & MPT_DEBUG) {
4229 if (ioc->alt_ioc)
4230 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4231 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4232 ioc->name, diag0val, diag1val));
4233 }
4234
4235 /*
4236 * Reset flag that says we've enabled event notification
4237 */
4238 ioc->facts.EventState = 0;
4239
4240 if (ioc->alt_ioc)
4241 ioc->alt_ioc->facts.EventState = 0;
4242
4243 return hard_reset_done;
4244}
4245
4246/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4247/**
4248 * SendIocReset - Send IOCReset request to MPT adapter.
4249 * @ioc: Pointer to MPT_ADAPTER structure
4250 * @reset_type: reset type, expected values are
4251 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4252 * @sleepFlag: Specifies whether the process can sleep
4253 *
4254 * Send IOCReset request to the MPT adapter.
4255 *
4256 * Returns 0 for success, non-zero for failure.
4257 */
4258static int
4259SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4260{
4261 int r;
4262 u32 state;
4263 int cntdn, count;
4264
4265 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4266 ioc->name, reset_type));
4267 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4268 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4269 return r;
4270
4271 /* FW ACK'd request, wait for READY state
4272 */
4273 count = 0;
4274 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4275
4276 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4277 cntdn--;
4278 count++;
4279 if (!cntdn) {
4280 if (sleepFlag != CAN_SLEEP)
4281 count *= 10;
4282
4283 printk(MYIOC_s_ERR_FMT
4284 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4285 ioc->name, state, (int)((count+5)/HZ));
4286 return -ETIME;
4287 }
4288
4289 if (sleepFlag == CAN_SLEEP) {
4290 msleep(1);
4291 } else {
4292 mdelay (1); /* 1 msec delay */
4293 }
4294 }
4295
4296 /* TODO!
4297 * Cleanup all event stuff for this IOC; re-issue EventNotification
4298 * request if needed.
4299 */
4300 if (ioc->facts.Function)
4301 ioc->facts.EventState = 0;
4302
4303 return 0;
4304}
4305
4306/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4307/**
4308 * initChainBuffers - Allocate memory for and initialize chain buffers
4309 * @ioc: Pointer to MPT_ADAPTER structure
4310 *
4311 * Allocates memory for and initializes chain buffers,
4312 * chain buffer control arrays and spinlock.
4313 */
4314static int
4315initChainBuffers(MPT_ADAPTER *ioc)
4316{
4317 u8 *mem;
4318 int sz, ii, num_chain;
4319 int scale, num_sge, numSGE;
4320
4321 /* ReqToChain size must equal the req_depth
4322 * index = req_idx
4323 */
4324 if (ioc->ReqToChain == NULL) {
4325 sz = ioc->req_depth * sizeof(int);
4326 mem = kmalloc(sz, GFP_ATOMIC);
4327 if (mem == NULL)
4328 return -1;
4329
4330 ioc->ReqToChain = (int *) mem;
4331 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4332 ioc->name, mem, sz));
4333 mem = kmalloc(sz, GFP_ATOMIC);
4334 if (mem == NULL)
4335 return -1;
4336
4337 ioc->RequestNB = (int *) mem;
4338 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4339 ioc->name, mem, sz));
4340 }
4341 for (ii = 0; ii < ioc->req_depth; ii++) {
4342 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4343 }
4344
4345 /* ChainToChain size must equal the total number
4346 * of chain buffers to be allocated.
4347 * index = chain_idx
4348 *
4349 * Calculate the number of chain buffers needed(plus 1) per I/O
4350 * then multiply the maximum number of simultaneous cmds
4351 *
4352 * num_sge = num sge in request frame + last chain buffer
4353 * scale = num sge per chain buffer if no chain element
4354 */
4355 scale = ioc->req_sz / ioc->SGE_size;
4356 if (ioc->sg_addr_size == sizeof(u64))
4357 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4358 else
4359 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4360
4361 if (ioc->sg_addr_size == sizeof(u64)) {
4362 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4363 (ioc->req_sz - 60) / ioc->SGE_size;
4364 } else {
4365 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4366 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4367 }
4368 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4369 ioc->name, num_sge, numSGE));
4370
4371 if (ioc->bus_type == FC) {
4372 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4373 numSGE = MPT_SCSI_FC_SG_DEPTH;
4374 } else {
4375 if (numSGE > MPT_SCSI_SG_DEPTH)
4376 numSGE = MPT_SCSI_SG_DEPTH;
4377 }
4378
4379 num_chain = 1;
4380 while (numSGE - num_sge > 0) {
4381 num_chain++;
4382 num_sge += (scale - 1);
4383 }
4384 num_chain++;
4385
4386 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4387 ioc->name, numSGE, num_sge, num_chain));
4388
4389 if (ioc->bus_type == SPI)
4390 num_chain *= MPT_SCSI_CAN_QUEUE;
4391 else if (ioc->bus_type == SAS)
4392 num_chain *= MPT_SAS_CAN_QUEUE;
4393 else
4394 num_chain *= MPT_FC_CAN_QUEUE;
4395
4396 ioc->num_chain = num_chain;
4397
4398 sz = num_chain * sizeof(int);
4399 if (ioc->ChainToChain == NULL) {
4400 mem = kmalloc(sz, GFP_ATOMIC);
4401 if (mem == NULL)
4402 return -1;
4403
4404 ioc->ChainToChain = (int *) mem;
4405 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4406 ioc->name, mem, sz));
4407 } else {
4408 mem = (u8 *) ioc->ChainToChain;
4409 }
4410 memset(mem, 0xFF, sz);
4411 return num_chain;
4412}
4413
4414/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4415/**
4416 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4417 * @ioc: Pointer to MPT_ADAPTER structure
4418 *
4419 * This routine allocates memory for the MPT reply and request frame
4420 * pools (if necessary), and primes the IOC reply FIFO with
4421 * reply frames.
4422 *
4423 * Returns 0 for success, non-zero for failure.
4424 */
4425static int
4426PrimeIocFifos(MPT_ADAPTER *ioc)
4427{
4428 MPT_FRAME_HDR *mf;
4429 unsigned long flags;
4430 dma_addr_t alloc_dma;
4431 u8 *mem;
4432 int i, reply_sz, sz, total_size, num_chain;
4433 u64 dma_mask;
4434
4435 dma_mask = 0;
4436
4437 /* Prime reply FIFO... */
4438
4439 if (ioc->reply_frames == NULL) {
4440 if ( (num_chain = initChainBuffers(ioc)) < 0)
4441 return -1;
4442 /*
4443 * 1078 errata workaround for the 36GB limitation
4444 */
4445 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4446 ioc->dma_mask > DMA_BIT_MASK(35)) {
4447 if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
4448 && !pci_set_consistent_dma_mask(ioc->pcidev,
4449 DMA_BIT_MASK(32))) {
4450 dma_mask = DMA_BIT_MASK(35);
4451 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4452 "setting 35 bit addressing for "
4453 "Request/Reply/Chain and Sense Buffers\n",
4454 ioc->name));
4455 } else {
4456 /*Reseting DMA mask to 64 bit*/
4457 pci_set_dma_mask(ioc->pcidev,
4458 DMA_BIT_MASK(64));
4459 pci_set_consistent_dma_mask(ioc->pcidev,
4460 DMA_BIT_MASK(64));
4461
4462 printk(MYIOC_s_ERR_FMT
4463 "failed setting 35 bit addressing for "
4464 "Request/Reply/Chain and Sense Buffers\n",
4465 ioc->name);
4466 return -1;
4467 }
4468 }
4469
4470 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4471 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4472 ioc->name, ioc->reply_sz, ioc->reply_depth));
4473 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4474 ioc->name, reply_sz, reply_sz));
4475
4476 sz = (ioc->req_sz * ioc->req_depth);
4477 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4478 ioc->name, ioc->req_sz, ioc->req_depth));
4479 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4480 ioc->name, sz, sz));
4481 total_size += sz;
4482
4483 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4484 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4485 ioc->name, ioc->req_sz, num_chain));
4486 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4487 ioc->name, sz, sz, num_chain));
4488
4489 total_size += sz;
4490 mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma);
4491 if (mem == NULL) {
4492 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4493 ioc->name);
4494 goto out_fail;
4495 }
4496
4497 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4498 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4499
4500 memset(mem, 0, total_size);
4501 ioc->alloc_total += total_size;
4502 ioc->alloc = mem;
4503 ioc->alloc_dma = alloc_dma;
4504 ioc->alloc_sz = total_size;
4505 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4506 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4507
4508 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4509 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4510
4511 alloc_dma += reply_sz;
4512 mem += reply_sz;
4513
4514 /* Request FIFO - WE manage this! */
4515
4516 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4517 ioc->req_frames_dma = alloc_dma;
4518
4519 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4520 ioc->name, mem, (void *)(ulong)alloc_dma));
4521
4522 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4523
4524#if defined(CONFIG_MTRR) && 0
4525 /*
4526 * Enable Write Combining MTRR for IOC's memory region.
4527 * (at least as much as we can; "size and base must be
4528 * multiples of 4 kiB"
4529 */
4530 ioc->mtrr_reg = mtrr_add(ioc->req_frames_dma,
4531 sz,
4532 MTRR_TYPE_WRCOMB, 1);
4533 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MTRR region registered (base:size=%08x:%x)\n",
4534 ioc->name, ioc->req_frames_dma, sz));
4535#endif
4536
4537 for (i = 0; i < ioc->req_depth; i++) {
4538 alloc_dma += ioc->req_sz;
4539 mem += ioc->req_sz;
4540 }
4541
4542 ioc->ChainBuffer = mem;
4543 ioc->ChainBufferDMA = alloc_dma;
4544
4545 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4546 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4547
4548 /* Initialize the free chain Q.
4549 */
4550
4551 INIT_LIST_HEAD(&ioc->FreeChainQ);
4552
4553 /* Post the chain buffers to the FreeChainQ.
4554 */
4555 mem = (u8 *)ioc->ChainBuffer;
4556 for (i=0; i < num_chain; i++) {
4557 mf = (MPT_FRAME_HDR *) mem;
4558 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4559 mem += ioc->req_sz;
4560 }
4561
4562 /* Initialize Request frames linked list
4563 */
4564 alloc_dma = ioc->req_frames_dma;
4565 mem = (u8 *) ioc->req_frames;
4566
4567 spin_lock_irqsave(&ioc->FreeQlock, flags);
4568 INIT_LIST_HEAD(&ioc->FreeQ);
4569 for (i = 0; i < ioc->req_depth; i++) {
4570 mf = (MPT_FRAME_HDR *) mem;
4571
4572 /* Queue REQUESTs *internally*! */
4573 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4574
4575 mem += ioc->req_sz;
4576 }
4577 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4578
4579 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4580 ioc->sense_buf_pool =
4581 pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma);
4582 if (ioc->sense_buf_pool == NULL) {
4583 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4584 ioc->name);
4585 goto out_fail;
4586 }
4587
4588 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4589 ioc->alloc_total += sz;
4590 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4591 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4592
4593 }
4594
4595 /* Post Reply frames to FIFO
4596 */
4597 alloc_dma = ioc->alloc_dma;
4598 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4599 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4600
4601 for (i = 0; i < ioc->reply_depth; i++) {
4602 /* Write each address to the IOC! */
4603 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4604 alloc_dma += ioc->reply_sz;
4605 }
4606
4607 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4608 ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
4609 ioc->dma_mask))
4610 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4611 "restoring 64 bit addressing\n", ioc->name));
4612
4613 return 0;
4614
4615out_fail:
4616
4617 if (ioc->alloc != NULL) {
4618 sz = ioc->alloc_sz;
4619 pci_free_consistent(ioc->pcidev,
4620 sz,
4621 ioc->alloc, ioc->alloc_dma);
4622 ioc->reply_frames = NULL;
4623 ioc->req_frames = NULL;
4624 ioc->alloc_total -= sz;
4625 }
4626 if (ioc->sense_buf_pool != NULL) {
4627 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4628 pci_free_consistent(ioc->pcidev,
4629 sz,
4630 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
4631 ioc->sense_buf_pool = NULL;
4632 }
4633
4634 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4635 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
4636 DMA_BIT_MASK(64)))
4637 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4638 "restoring 64 bit addressing\n", ioc->name));
4639
4640 return -1;
4641}
4642
4643/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4644/**
4645 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4646 * from IOC via doorbell handshake method.
4647 * @ioc: Pointer to MPT_ADAPTER structure
4648 * @reqBytes: Size of the request in bytes
4649 * @req: Pointer to MPT request frame
4650 * @replyBytes: Expected size of the reply in bytes
4651 * @u16reply: Pointer to area where reply should be written
4652 * @maxwait: Max wait time for a reply (in seconds)
4653 * @sleepFlag: Specifies whether the process can sleep
4654 *
4655 * NOTES: It is the callers responsibility to byte-swap fields in the
4656 * request which are greater than 1 byte in size. It is also the
4657 * callers responsibility to byte-swap response fields which are
4658 * greater than 1 byte in size.
4659 *
4660 * Returns 0 for success, non-zero for failure.
4661 */
4662static int
4663mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4664 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4665{
4666 MPIDefaultReply_t *mptReply;
4667 int failcnt = 0;
4668 int t;
4669
4670 /*
4671 * Get ready to cache a handshake reply
4672 */
4673 ioc->hs_reply_idx = 0;
4674 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4675 mptReply->MsgLength = 0;
4676
4677 /*
4678 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4679 * then tell IOC that we want to handshake a request of N words.
4680 * (WRITE u32val to Doorbell reg).
4681 */
4682 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4683 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4684 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4685 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4686
4687 /*
4688 * Wait for IOC's doorbell handshake int
4689 */
4690 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4691 failcnt++;
4692
4693 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4694 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4695
4696 /* Read doorbell and check for active bit */
4697 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4698 return -1;
4699
4700 /*
4701 * Clear doorbell int (WRITE 0 to IntStatus reg),
4702 * then wait for IOC to ACKnowledge that it's ready for
4703 * our handshake request.
4704 */
4705 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4706 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4707 failcnt++;
4708
4709 if (!failcnt) {
4710 int ii;
4711 u8 *req_as_bytes = (u8 *) req;
4712
4713 /*
4714 * Stuff request words via doorbell handshake,
4715 * with ACK from IOC for each.
4716 */
4717 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4718 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4719 (req_as_bytes[(ii*4) + 1] << 8) |
4720 (req_as_bytes[(ii*4) + 2] << 16) |
4721 (req_as_bytes[(ii*4) + 3] << 24));
4722
4723 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4724 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4725 failcnt++;
4726 }
4727
4728 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4729 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4730
4731 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4732 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4733
4734 /*
4735 * Wait for completion of doorbell handshake reply from the IOC
4736 */
4737 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4738 failcnt++;
4739
4740 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4741 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4742
4743 /*
4744 * Copy out the cached reply...
4745 */
4746 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4747 u16reply[ii] = ioc->hs_reply[ii];
4748 } else {
4749 return -99;
4750 }
4751
4752 return -failcnt;
4753}
4754
4755/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4756/**
4757 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4758 * @ioc: Pointer to MPT_ADAPTER structure
4759 * @howlong: How long to wait (in seconds)
4760 * @sleepFlag: Specifies whether the process can sleep
4761 *
4762 * This routine waits (up to ~2 seconds max) for IOC doorbell
4763 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4764 * bit in its IntStatus register being clear.
4765 *
4766 * Returns a negative value on failure, else wait loop count.
4767 */
4768static int
4769WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4770{
4771 int cntdn;
4772 int count = 0;
4773 u32 intstat=0;
4774
4775 cntdn = 1000 * howlong;
4776
4777 if (sleepFlag == CAN_SLEEP) {
4778 while (--cntdn) {
4779 msleep (1);
4780 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4781 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4782 break;
4783 count++;
4784 }
4785 } else {
4786 while (--cntdn) {
4787 udelay (1000);
4788 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4789 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4790 break;
4791 count++;
4792 }
4793 }
4794
4795 if (cntdn) {
4796 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4797 ioc->name, count));
4798 return count;
4799 }
4800
4801 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4802 ioc->name, count, intstat);
4803 return -1;
4804}
4805
4806/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4807/**
4808 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4809 * @ioc: Pointer to MPT_ADAPTER structure
4810 * @howlong: How long to wait (in seconds)
4811 * @sleepFlag: Specifies whether the process can sleep
4812 *
4813 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4814 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4815 *
4816 * Returns a negative value on failure, else wait loop count.
4817 */
4818static int
4819WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4820{
4821 int cntdn;
4822 int count = 0;
4823 u32 intstat=0;
4824
4825 cntdn = 1000 * howlong;
4826 if (sleepFlag == CAN_SLEEP) {
4827 while (--cntdn) {
4828 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4829 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4830 break;
4831 msleep(1);
4832 count++;
4833 }
4834 } else {
4835 while (--cntdn) {
4836 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4837 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4838 break;
4839 udelay (1000);
4840 count++;
4841 }
4842 }
4843
4844 if (cntdn) {
4845 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4846 ioc->name, count, howlong));
4847 return count;
4848 }
4849
4850 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4851 ioc->name, count, intstat);
4852 return -1;
4853}
4854
4855/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4856/**
4857 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4858 * @ioc: Pointer to MPT_ADAPTER structure
4859 * @howlong: How long to wait (in seconds)
4860 * @sleepFlag: Specifies whether the process can sleep
4861 *
4862 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4863 * Reply is cached to IOC private area large enough to hold a maximum
4864 * of 128 bytes of reply data.
4865 *
4866 * Returns a negative value on failure, else size of reply in WORDS.
4867 */
4868static int
4869WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4870{
4871 int u16cnt = 0;
4872 int failcnt = 0;
4873 int t;
4874 u16 *hs_reply = ioc->hs_reply;
4875 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4876 u16 hword;
4877
4878 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4879
4880 /*
4881 * Get first two u16's so we can look at IOC's intended reply MsgLength
4882 */
4883 u16cnt=0;
4884 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4885 failcnt++;
4886 } else {
4887 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4888 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4889 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4890 failcnt++;
4891 else {
4892 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4893 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4894 }
4895 }
4896
4897 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4898 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4899 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4900
4901 /*
4902 * If no error (and IOC said MsgLength is > 0), piece together
4903 * reply 16 bits at a time.
4904 */
4905 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4906 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4907 failcnt++;
4908 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4909 /* don't overflow our IOC hs_reply[] buffer! */
4910 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4911 hs_reply[u16cnt] = hword;
4912 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4913 }
4914
4915 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4916 failcnt++;
4917 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4918
4919 if (failcnt) {
4920 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4921 ioc->name);
4922 return -failcnt;
4923 }
4924#if 0
4925 else if (u16cnt != (2 * mptReply->MsgLength)) {
4926 return -101;
4927 }
4928 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4929 return -102;
4930 }
4931#endif
4932
4933 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4934 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4935
4936 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4937 ioc->name, t, u16cnt/2));
4938 return u16cnt/2;
4939}
4940
4941/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4942/**
4943 * GetLanConfigPages - Fetch LANConfig pages.
4944 * @ioc: Pointer to MPT_ADAPTER structure
4945 *
4946 * Return: 0 for success
4947 * -ENOMEM if no memory available
4948 * -EPERM if not allowed due to ISR context
4949 * -EAGAIN if no msg frames currently available
4950 * -EFAULT for non-successful reply or no reply (timeout)
4951 */
4952static int
4953GetLanConfigPages(MPT_ADAPTER *ioc)
4954{
4955 ConfigPageHeader_t hdr;
4956 CONFIGPARMS cfg;
4957 LANPage0_t *ppage0_alloc;
4958 dma_addr_t page0_dma;
4959 LANPage1_t *ppage1_alloc;
4960 dma_addr_t page1_dma;
4961 int rc = 0;
4962 int data_sz;
4963 int copy_sz;
4964
4965 /* Get LAN Page 0 header */
4966 hdr.PageVersion = 0;
4967 hdr.PageLength = 0;
4968 hdr.PageNumber = 0;
4969 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4970 cfg.cfghdr.hdr = &hdr;
4971 cfg.physAddr = -1;
4972 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4973 cfg.dir = 0;
4974 cfg.pageAddr = 0;
4975 cfg.timeout = 0;
4976
4977 if ((rc = mpt_config(ioc, &cfg)) != 0)
4978 return rc;
4979
4980 if (hdr.PageLength > 0) {
4981 data_sz = hdr.PageLength * 4;
4982 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4983 rc = -ENOMEM;
4984 if (ppage0_alloc) {
4985 memset((u8 *)ppage0_alloc, 0, data_sz);
4986 cfg.physAddr = page0_dma;
4987 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4988
4989 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4990 /* save the data */
4991 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4992 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4993
4994 }
4995
4996 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4997
4998 /* FIXME!
4999 * Normalize endianness of structure data,
5000 * by byte-swapping all > 1 byte fields!
5001 */
5002
5003 }
5004
5005 if (rc)
5006 return rc;
5007 }
5008
5009 /* Get LAN Page 1 header */
5010 hdr.PageVersion = 0;
5011 hdr.PageLength = 0;
5012 hdr.PageNumber = 1;
5013 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
5014 cfg.cfghdr.hdr = &hdr;
5015 cfg.physAddr = -1;
5016 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5017 cfg.dir = 0;
5018 cfg.pageAddr = 0;
5019
5020 if ((rc = mpt_config(ioc, &cfg)) != 0)
5021 return rc;
5022
5023 if (hdr.PageLength == 0)
5024 return 0;
5025
5026 data_sz = hdr.PageLength * 4;
5027 rc = -ENOMEM;
5028 ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
5029 if (ppage1_alloc) {
5030 memset((u8 *)ppage1_alloc, 0, data_sz);
5031 cfg.physAddr = page1_dma;
5032 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5033
5034 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5035 /* save the data */
5036 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5037 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5038 }
5039
5040 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
5041
5042 /* FIXME!
5043 * Normalize endianness of structure data,
5044 * by byte-swapping all > 1 byte fields!
5045 */
5046
5047 }
5048
5049 return rc;
5050}
5051
5052/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5053/**
5054 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5055 * @ioc: Pointer to MPT_ADAPTER structure
5056 * @persist_opcode: see below
5057 *
5058 * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
5059 * devices not currently present.
5060 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
5061 *
5062 * NOTE: Don't use not this function during interrupt time.
5063 *
5064 * Returns 0 for success, non-zero error
5065 */
5066
5067/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5068int
5069mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5070{
5071 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5072 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5073 MPT_FRAME_HDR *mf = NULL;
5074 MPIHeader_t *mpi_hdr;
5075 int ret = 0;
5076 unsigned long timeleft;
5077
5078 mutex_lock(&ioc->mptbase_cmds.mutex);
5079
5080 /* init the internal cmd struct */
5081 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5082 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5083
5084 /* insure garbage is not sent to fw */
5085 switch(persist_opcode) {
5086
5087 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5088 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5089 break;
5090
5091 default:
5092 ret = -1;
5093 goto out;
5094 }
5095
5096 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5097 __func__, persist_opcode);
5098
5099 /* Get a MF for this command.
5100 */
5101 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5102 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5103 ret = -1;
5104 goto out;
5105 }
5106
5107 mpi_hdr = (MPIHeader_t *) mf;
5108 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5109 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5110 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5111 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5112 sasIoUnitCntrReq->Operation = persist_opcode;
5113
5114 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5115 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5116 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5117 ret = -ETIME;
5118 printk(KERN_DEBUG "%s: failed\n", __func__);
5119 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5120 goto out;
5121 if (!timeleft) {
5122 printk(MYIOC_s_WARN_FMT
5123 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5124 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5125 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5126 mpt_free_msg_frame(ioc, mf);
5127 }
5128 goto out;
5129 }
5130
5131 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5132 ret = -1;
5133 goto out;
5134 }
5135
5136 sasIoUnitCntrReply =
5137 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5138 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5139 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5140 __func__, sasIoUnitCntrReply->IOCStatus,
5141 sasIoUnitCntrReply->IOCLogInfo);
5142 printk(KERN_DEBUG "%s: failed\n", __func__);
5143 ret = -1;
5144 } else
5145 printk(KERN_DEBUG "%s: success\n", __func__);
5146 out:
5147
5148 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5149 mutex_unlock(&ioc->mptbase_cmds.mutex);
5150 return ret;
5151}
5152
5153/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5154
5155static void
5156mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5157 MpiEventDataRaid_t * pRaidEventData)
5158{
5159 int volume;
5160 int reason;
5161 int disk;
5162 int status;
5163 int flags;
5164 int state;
5165
5166 volume = pRaidEventData->VolumeID;
5167 reason = pRaidEventData->ReasonCode;
5168 disk = pRaidEventData->PhysDiskNum;
5169 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5170 flags = (status >> 0) & 0xff;
5171 state = (status >> 8) & 0xff;
5172
5173 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5174 return;
5175 }
5176
5177 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5178 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5179 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5180 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5181 ioc->name, disk, volume);
5182 } else {
5183 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5184 ioc->name, volume);
5185 }
5186
5187 switch(reason) {
5188 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5189 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5190 ioc->name);
5191 break;
5192
5193 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5194
5195 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5196 ioc->name);
5197 break;
5198
5199 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5200 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5201 ioc->name);
5202 break;
5203
5204 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5205 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5206 ioc->name,
5207 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5208 ? "optimal"
5209 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5210 ? "degraded"
5211 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5212 ? "failed"
5213 : "state unknown",
5214 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5215 ? ", enabled" : "",
5216 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5217 ? ", quiesced" : "",
5218 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5219 ? ", resync in progress" : "" );
5220 break;
5221
5222 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5223 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5224 ioc->name, disk);
5225 break;
5226
5227 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5228 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5229 ioc->name);
5230 break;
5231
5232 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5233 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5234 ioc->name);
5235 break;
5236
5237 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5238 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5239 ioc->name);
5240 break;
5241
5242 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5243 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5244 ioc->name,
5245 state == MPI_PHYSDISK0_STATUS_ONLINE
5246 ? "online"
5247 : state == MPI_PHYSDISK0_STATUS_MISSING
5248 ? "missing"
5249 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5250 ? "not compatible"
5251 : state == MPI_PHYSDISK0_STATUS_FAILED
5252 ? "failed"
5253 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5254 ? "initializing"
5255 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5256 ? "offline requested"
5257 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5258 ? "failed requested"
5259 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5260 ? "offline"
5261 : "state unknown",
5262 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5263 ? ", out of sync" : "",
5264 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5265 ? ", quiesced" : "" );
5266 break;
5267
5268 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5269 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5270 ioc->name, disk);
5271 break;
5272
5273 case MPI_EVENT_RAID_RC_SMART_DATA:
5274 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5275 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5276 break;
5277
5278 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5279 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5280 ioc->name, disk);
5281 break;
5282 }
5283}
5284
5285/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5286/**
5287 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5288 * @ioc: Pointer to MPT_ADAPTER structure
5289 *
5290 * Returns: 0 for success
5291 * -ENOMEM if no memory available
5292 * -EPERM if not allowed due to ISR context
5293 * -EAGAIN if no msg frames currently available
5294 * -EFAULT for non-successful reply or no reply (timeout)
5295 */
5296static int
5297GetIoUnitPage2(MPT_ADAPTER *ioc)
5298{
5299 ConfigPageHeader_t hdr;
5300 CONFIGPARMS cfg;
5301 IOUnitPage2_t *ppage_alloc;
5302 dma_addr_t page_dma;
5303 int data_sz;
5304 int rc;
5305
5306 /* Get the page header */
5307 hdr.PageVersion = 0;
5308 hdr.PageLength = 0;
5309 hdr.PageNumber = 2;
5310 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5311 cfg.cfghdr.hdr = &hdr;
5312 cfg.physAddr = -1;
5313 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5314 cfg.dir = 0;
5315 cfg.pageAddr = 0;
5316 cfg.timeout = 0;
5317
5318 if ((rc = mpt_config(ioc, &cfg)) != 0)
5319 return rc;
5320
5321 if (hdr.PageLength == 0)
5322 return 0;
5323
5324 /* Read the config page */
5325 data_sz = hdr.PageLength * 4;
5326 rc = -ENOMEM;
5327 ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
5328 if (ppage_alloc) {
5329 memset((u8 *)ppage_alloc, 0, data_sz);
5330 cfg.physAddr = page_dma;
5331 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5332
5333 /* If Good, save data */
5334 if ((rc = mpt_config(ioc, &cfg)) == 0)
5335 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5336
5337 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
5338 }
5339
5340 return rc;
5341}
5342
5343/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5344/**
5345 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5346 * @ioc: Pointer to a Adapter Strucutre
5347 * @portnum: IOC port number
5348 *
5349 * Return: -EFAULT if read of config page header fails
5350 * or if no nvram
5351 * If read of SCSI Port Page 0 fails,
5352 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5353 * Adapter settings: async, narrow
5354 * Return 1
5355 * If read of SCSI Port Page 2 fails,
5356 * Adapter settings valid
5357 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5358 * Return 1
5359 * Else
5360 * Both valid
5361 * Return 0
5362 * CHECK - what type of locking mechanisms should be used????
5363 */
5364static int
5365mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5366{
5367 u8 *pbuf;
5368 dma_addr_t buf_dma;
5369 CONFIGPARMS cfg;
5370 ConfigPageHeader_t header;
5371 int ii;
5372 int data, rc = 0;
5373
5374 /* Allocate memory
5375 */
5376 if (!ioc->spi_data.nvram) {
5377 int sz;
5378 u8 *mem;
5379 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5380 mem = kmalloc(sz, GFP_ATOMIC);
5381 if (mem == NULL)
5382 return -EFAULT;
5383
5384 ioc->spi_data.nvram = (int *) mem;
5385
5386 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5387 ioc->name, ioc->spi_data.nvram, sz));
5388 }
5389
5390 /* Invalidate NVRAM information
5391 */
5392 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5393 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5394 }
5395
5396 /* Read SPP0 header, allocate memory, then read page.
5397 */
5398 header.PageVersion = 0;
5399 header.PageLength = 0;
5400 header.PageNumber = 0;
5401 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5402 cfg.cfghdr.hdr = &header;
5403 cfg.physAddr = -1;
5404 cfg.pageAddr = portnum;
5405 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5406 cfg.dir = 0;
5407 cfg.timeout = 0; /* use default */
5408 if (mpt_config(ioc, &cfg) != 0)
5409 return -EFAULT;
5410
5411 if (header.PageLength > 0) {
5412 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5413 if (pbuf) {
5414 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5415 cfg.physAddr = buf_dma;
5416 if (mpt_config(ioc, &cfg) != 0) {
5417 ioc->spi_data.maxBusWidth = MPT_NARROW;
5418 ioc->spi_data.maxSyncOffset = 0;
5419 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5420 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5421 rc = 1;
5422 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5423 "Unable to read PortPage0 minSyncFactor=%x\n",
5424 ioc->name, ioc->spi_data.minSyncFactor));
5425 } else {
5426 /* Save the Port Page 0 data
5427 */
5428 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5429 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5430 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5431
5432 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5433 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5434 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5435 "noQas due to Capabilities=%x\n",
5436 ioc->name, pPP0->Capabilities));
5437 }
5438 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5439 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5440 if (data) {
5441 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5442 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5443 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5444 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5445 "PortPage0 minSyncFactor=%x\n",
5446 ioc->name, ioc->spi_data.minSyncFactor));
5447 } else {
5448 ioc->spi_data.maxSyncOffset = 0;
5449 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5450 }
5451
5452 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5453
5454 /* Update the minSyncFactor based on bus type.
5455 */
5456 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5457 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5458
5459 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5460 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5461 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5462 "HVD or SE detected, minSyncFactor=%x\n",
5463 ioc->name, ioc->spi_data.minSyncFactor));
5464 }
5465 }
5466 }
5467 if (pbuf) {
5468 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5469 }
5470 }
5471 }
5472
5473 /* SCSI Port Page 2 - Read the header then the page.
5474 */
5475 header.PageVersion = 0;
5476 header.PageLength = 0;
5477 header.PageNumber = 2;
5478 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5479 cfg.cfghdr.hdr = &header;
5480 cfg.physAddr = -1;
5481 cfg.pageAddr = portnum;
5482 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5483 cfg.dir = 0;
5484 if (mpt_config(ioc, &cfg) != 0)
5485 return -EFAULT;
5486
5487 if (header.PageLength > 0) {
5488 /* Allocate memory and read SCSI Port Page 2
5489 */
5490 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5491 if (pbuf) {
5492 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5493 cfg.physAddr = buf_dma;
5494 if (mpt_config(ioc, &cfg) != 0) {
5495 /* Nvram data is left with INVALID mark
5496 */
5497 rc = 1;
5498 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5499
5500 /* This is an ATTO adapter, read Page2 accordingly
5501 */
5502 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5503 ATTODeviceInfo_t *pdevice = NULL;
5504 u16 ATTOFlags;
5505
5506 /* Save the Port Page 2 data
5507 * (reformat into a 32bit quantity)
5508 */
5509 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5510 pdevice = &pPP2->DeviceSettings[ii];
5511 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5512 data = 0;
5513
5514 /* Translate ATTO device flags to LSI format
5515 */
5516 if (ATTOFlags & ATTOFLAG_DISC)
5517 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5518 if (ATTOFlags & ATTOFLAG_ID_ENB)
5519 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5520 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5521 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5522 if (ATTOFlags & ATTOFLAG_TAGGED)
5523 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5524 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5525 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5526
5527 data = (data << 16) | (pdevice->Period << 8) | 10;
5528 ioc->spi_data.nvram[ii] = data;
5529 }
5530 } else {
5531 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5532 MpiDeviceInfo_t *pdevice = NULL;
5533
5534 /*
5535 * Save "Set to Avoid SCSI Bus Resets" flag
5536 */
5537 ioc->spi_data.bus_reset =
5538 (le32_to_cpu(pPP2->PortFlags) &
5539 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5540 0 : 1 ;
5541
5542 /* Save the Port Page 2 data
5543 * (reformat into a 32bit quantity)
5544 */
5545 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5546 ioc->spi_data.PortFlags = data;
5547 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5548 pdevice = &pPP2->DeviceSettings[ii];
5549 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5550 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5551 ioc->spi_data.nvram[ii] = data;
5552 }
5553 }
5554
5555 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5556 }
5557 }
5558
5559 /* Update Adapter limits with those from NVRAM
5560 * Comment: Don't need to do this. Target performance
5561 * parameters will never exceed the adapters limits.
5562 */
5563
5564 return rc;
5565}
5566
5567/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5568/**
5569 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5570 * @ioc: Pointer to a Adapter Strucutre
5571 * @portnum: IOC port number
5572 *
5573 * Return: -EFAULT if read of config page header fails
5574 * or 0 if success.
5575 */
5576static int
5577mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5578{
5579 CONFIGPARMS cfg;
5580 ConfigPageHeader_t header;
5581
5582 /* Read the SCSI Device Page 1 header
5583 */
5584 header.PageVersion = 0;
5585 header.PageLength = 0;
5586 header.PageNumber = 1;
5587 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5588 cfg.cfghdr.hdr = &header;
5589 cfg.physAddr = -1;
5590 cfg.pageAddr = portnum;
5591 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5592 cfg.dir = 0;
5593 cfg.timeout = 0;
5594 if (mpt_config(ioc, &cfg) != 0)
5595 return -EFAULT;
5596
5597 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5598 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5599
5600 header.PageVersion = 0;
5601 header.PageLength = 0;
5602 header.PageNumber = 0;
5603 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5604 if (mpt_config(ioc, &cfg) != 0)
5605 return -EFAULT;
5606
5607 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5608 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5609
5610 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5611 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5612
5613 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5614 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5615 return 0;
5616}
5617
5618/**
5619 * mpt_inactive_raid_list_free - This clears this link list.
5620 * @ioc : pointer to per adapter structure
5621 **/
5622static void
5623mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5624{
5625 struct inactive_raid_component_info *component_info, *pNext;
5626
5627 if (list_empty(&ioc->raid_data.inactive_list))
5628 return;
5629
5630 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5631 list_for_each_entry_safe(component_info, pNext,
5632 &ioc->raid_data.inactive_list, list) {
5633 list_del(&component_info->list);
5634 kfree(component_info);
5635 }
5636 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5637}
5638
5639/**
5640 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5641 *
5642 * @ioc : pointer to per adapter structure
5643 * @channel : volume channel
5644 * @id : volume target id
5645 **/
5646static void
5647mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5648{
5649 CONFIGPARMS cfg;
5650 ConfigPageHeader_t hdr;
5651 dma_addr_t dma_handle;
5652 pRaidVolumePage0_t buffer = NULL;
5653 int i;
5654 RaidPhysDiskPage0_t phys_disk;
5655 struct inactive_raid_component_info *component_info;
5656 int handle_inactive_volumes;
5657
5658 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5659 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5660 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5661 cfg.pageAddr = (channel << 8) + id;
5662 cfg.cfghdr.hdr = &hdr;
5663 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5664
5665 if (mpt_config(ioc, &cfg) != 0)
5666 goto out;
5667
5668 if (!hdr.PageLength)
5669 goto out;
5670
5671 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5672 &dma_handle);
5673
5674 if (!buffer)
5675 goto out;
5676
5677 cfg.physAddr = dma_handle;
5678 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5679
5680 if (mpt_config(ioc, &cfg) != 0)
5681 goto out;
5682
5683 if (!buffer->NumPhysDisks)
5684 goto out;
5685
5686 handle_inactive_volumes =
5687 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5688 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5689 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5690 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5691
5692 if (!handle_inactive_volumes)
5693 goto out;
5694
5695 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5696 for (i = 0; i < buffer->NumPhysDisks; i++) {
5697 if(mpt_raid_phys_disk_pg0(ioc,
5698 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5699 continue;
5700
5701 if ((component_info = kmalloc(sizeof (*component_info),
5702 GFP_KERNEL)) == NULL)
5703 continue;
5704
5705 component_info->volumeID = id;
5706 component_info->volumeBus = channel;
5707 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5708 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5709 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5710 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5711
5712 list_add_tail(&component_info->list,
5713 &ioc->raid_data.inactive_list);
5714 }
5715 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5716
5717 out:
5718 if (buffer)
5719 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5720 dma_handle);
5721}
5722
5723/**
5724 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5725 * @ioc: Pointer to a Adapter Structure
5726 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5727 * @phys_disk: requested payload data returned
5728 *
5729 * Return:
5730 * 0 on success
5731 * -EFAULT if read of config page header fails or data pointer not NULL
5732 * -ENOMEM if pci_alloc failed
5733 **/
5734int
5735mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5736 RaidPhysDiskPage0_t *phys_disk)
5737{
5738 CONFIGPARMS cfg;
5739 ConfigPageHeader_t hdr;
5740 dma_addr_t dma_handle;
5741 pRaidPhysDiskPage0_t buffer = NULL;
5742 int rc;
5743
5744 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5745 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5746 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5747
5748 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5749 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5750 cfg.cfghdr.hdr = &hdr;
5751 cfg.physAddr = -1;
5752 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5753
5754 if (mpt_config(ioc, &cfg) != 0) {
5755 rc = -EFAULT;
5756 goto out;
5757 }
5758
5759 if (!hdr.PageLength) {
5760 rc = -EFAULT;
5761 goto out;
5762 }
5763
5764 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5765 &dma_handle);
5766
5767 if (!buffer) {
5768 rc = -ENOMEM;
5769 goto out;
5770 }
5771
5772 cfg.physAddr = dma_handle;
5773 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5774 cfg.pageAddr = phys_disk_num;
5775
5776 if (mpt_config(ioc, &cfg) != 0) {
5777 rc = -EFAULT;
5778 goto out;
5779 }
5780
5781 rc = 0;
5782 memcpy(phys_disk, buffer, sizeof(*buffer));
5783 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5784
5785 out:
5786
5787 if (buffer)
5788 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5789 dma_handle);
5790
5791 return rc;
5792}
5793
5794/**
5795 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5796 * @ioc: Pointer to a Adapter Structure
5797 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5798 *
5799 * Return:
5800 * returns number paths
5801 **/
5802int
5803mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5804{
5805 CONFIGPARMS cfg;
5806 ConfigPageHeader_t hdr;
5807 dma_addr_t dma_handle;
5808 pRaidPhysDiskPage1_t buffer = NULL;
5809 int rc;
5810
5811 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5812 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5813
5814 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5815 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5816 hdr.PageNumber = 1;
5817 cfg.cfghdr.hdr = &hdr;
5818 cfg.physAddr = -1;
5819 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5820
5821 if (mpt_config(ioc, &cfg) != 0) {
5822 rc = 0;
5823 goto out;
5824 }
5825
5826 if (!hdr.PageLength) {
5827 rc = 0;
5828 goto out;
5829 }
5830
5831 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5832 &dma_handle);
5833
5834 if (!buffer) {
5835 rc = 0;
5836 goto out;
5837 }
5838
5839 cfg.physAddr = dma_handle;
5840 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5841 cfg.pageAddr = phys_disk_num;
5842
5843 if (mpt_config(ioc, &cfg) != 0) {
5844 rc = 0;
5845 goto out;
5846 }
5847
5848 rc = buffer->NumPhysDiskPaths;
5849 out:
5850
5851 if (buffer)
5852 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5853 dma_handle);
5854
5855 return rc;
5856}
5857EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5858
5859/**
5860 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5861 * @ioc: Pointer to a Adapter Structure
5862 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5863 * @phys_disk: requested payload data returned
5864 *
5865 * Return:
5866 * 0 on success
5867 * -EFAULT if read of config page header fails or data pointer not NULL
5868 * -ENOMEM if pci_alloc failed
5869 **/
5870int
5871mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5872 RaidPhysDiskPage1_t *phys_disk)
5873{
5874 CONFIGPARMS cfg;
5875 ConfigPageHeader_t hdr;
5876 dma_addr_t dma_handle;
5877 pRaidPhysDiskPage1_t buffer = NULL;
5878 int rc;
5879 int i;
5880 __le64 sas_address;
5881
5882 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5883 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5884 rc = 0;
5885
5886 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5887 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5888 hdr.PageNumber = 1;
5889 cfg.cfghdr.hdr = &hdr;
5890 cfg.physAddr = -1;
5891 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5892
5893 if (mpt_config(ioc, &cfg) != 0) {
5894 rc = -EFAULT;
5895 goto out;
5896 }
5897
5898 if (!hdr.PageLength) {
5899 rc = -EFAULT;
5900 goto out;
5901 }
5902
5903 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5904 &dma_handle);
5905
5906 if (!buffer) {
5907 rc = -ENOMEM;
5908 goto out;
5909 }
5910
5911 cfg.physAddr = dma_handle;
5912 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5913 cfg.pageAddr = phys_disk_num;
5914
5915 if (mpt_config(ioc, &cfg) != 0) {
5916 rc = -EFAULT;
5917 goto out;
5918 }
5919
5920 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5921 phys_disk->PhysDiskNum = phys_disk_num;
5922 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5923 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5924 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5925 phys_disk->Path[i].OwnerIdentifier =
5926 buffer->Path[i].OwnerIdentifier;
5927 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5928 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5929 sas_address = le64_to_cpu(sas_address);
5930 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5931 memcpy(&sas_address,
5932 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5933 sas_address = le64_to_cpu(sas_address);
5934 memcpy(&phys_disk->Path[i].OwnerWWID,
5935 &sas_address, sizeof(__le64));
5936 }
5937
5938 out:
5939
5940 if (buffer)
5941 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5942 dma_handle);
5943
5944 return rc;
5945}
5946EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5947
5948
5949/**
5950 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5951 * @ioc: Pointer to a Adapter Strucutre
5952 *
5953 * Return:
5954 * 0 on success
5955 * -EFAULT if read of config page header fails or data pointer not NULL
5956 * -ENOMEM if pci_alloc failed
5957 **/
5958int
5959mpt_findImVolumes(MPT_ADAPTER *ioc)
5960{
5961 IOCPage2_t *pIoc2;
5962 u8 *mem;
5963 dma_addr_t ioc2_dma;
5964 CONFIGPARMS cfg;
5965 ConfigPageHeader_t header;
5966 int rc = 0;
5967 int iocpage2sz;
5968 int i;
5969
5970 if (!ioc->ir_firmware)
5971 return 0;
5972
5973 /* Free the old page
5974 */
5975 kfree(ioc->raid_data.pIocPg2);
5976 ioc->raid_data.pIocPg2 = NULL;
5977 mpt_inactive_raid_list_free(ioc);
5978
5979 /* Read IOCP2 header then the page.
5980 */
5981 header.PageVersion = 0;
5982 header.PageLength = 0;
5983 header.PageNumber = 2;
5984 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5985 cfg.cfghdr.hdr = &header;
5986 cfg.physAddr = -1;
5987 cfg.pageAddr = 0;
5988 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5989 cfg.dir = 0;
5990 cfg.timeout = 0;
5991 if (mpt_config(ioc, &cfg) != 0)
5992 return -EFAULT;
5993
5994 if (header.PageLength == 0)
5995 return -EFAULT;
5996
5997 iocpage2sz = header.PageLength * 4;
5998 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
5999 if (!pIoc2)
6000 return -ENOMEM;
6001
6002 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6003 cfg.physAddr = ioc2_dma;
6004 if (mpt_config(ioc, &cfg) != 0)
6005 goto out;
6006
6007 mem = kmalloc(iocpage2sz, GFP_KERNEL);
6008 if (!mem) {
6009 rc = -ENOMEM;
6010 goto out;
6011 }
6012
6013 memcpy(mem, (u8 *)pIoc2, iocpage2sz);
6014 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6015
6016 mpt_read_ioc_pg_3(ioc);
6017
6018 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6019 mpt_inactive_raid_volumes(ioc,
6020 pIoc2->RaidVolume[i].VolumeBus,
6021 pIoc2->RaidVolume[i].VolumeID);
6022
6023 out:
6024 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
6025
6026 return rc;
6027}
6028
6029static int
6030mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6031{
6032 IOCPage3_t *pIoc3;
6033 u8 *mem;
6034 CONFIGPARMS cfg;
6035 ConfigPageHeader_t header;
6036 dma_addr_t ioc3_dma;
6037 int iocpage3sz = 0;
6038
6039 /* Free the old page
6040 */
6041 kfree(ioc->raid_data.pIocPg3);
6042 ioc->raid_data.pIocPg3 = NULL;
6043
6044 /* There is at least one physical disk.
6045 * Read and save IOC Page 3
6046 */
6047 header.PageVersion = 0;
6048 header.PageLength = 0;
6049 header.PageNumber = 3;
6050 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6051 cfg.cfghdr.hdr = &header;
6052 cfg.physAddr = -1;
6053 cfg.pageAddr = 0;
6054 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6055 cfg.dir = 0;
6056 cfg.timeout = 0;
6057 if (mpt_config(ioc, &cfg) != 0)
6058 return 0;
6059
6060 if (header.PageLength == 0)
6061 return 0;
6062
6063 /* Read Header good, alloc memory
6064 */
6065 iocpage3sz = header.PageLength * 4;
6066 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
6067 if (!pIoc3)
6068 return 0;
6069
6070 /* Read the Page and save the data
6071 * into malloc'd memory.
6072 */
6073 cfg.physAddr = ioc3_dma;
6074 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6075 if (mpt_config(ioc, &cfg) == 0) {
6076 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6077 if (mem) {
6078 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6079 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6080 }
6081 }
6082
6083 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
6084
6085 return 0;
6086}
6087
6088static void
6089mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6090{
6091 IOCPage4_t *pIoc4;
6092 CONFIGPARMS cfg;
6093 ConfigPageHeader_t header;
6094 dma_addr_t ioc4_dma;
6095 int iocpage4sz;
6096
6097 /* Read and save IOC Page 4
6098 */
6099 header.PageVersion = 0;
6100 header.PageLength = 0;
6101 header.PageNumber = 4;
6102 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6103 cfg.cfghdr.hdr = &header;
6104 cfg.physAddr = -1;
6105 cfg.pageAddr = 0;
6106 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6107 cfg.dir = 0;
6108 cfg.timeout = 0;
6109 if (mpt_config(ioc, &cfg) != 0)
6110 return;
6111
6112 if (header.PageLength == 0)
6113 return;
6114
6115 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6116 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6117 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
6118 if (!pIoc4)
6119 return;
6120 ioc->alloc_total += iocpage4sz;
6121 } else {
6122 ioc4_dma = ioc->spi_data.IocPg4_dma;
6123 iocpage4sz = ioc->spi_data.IocPg4Sz;
6124 }
6125
6126 /* Read the Page into dma memory.
6127 */
6128 cfg.physAddr = ioc4_dma;
6129 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6130 if (mpt_config(ioc, &cfg) == 0) {
6131 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6132 ioc->spi_data.IocPg4_dma = ioc4_dma;
6133 ioc->spi_data.IocPg4Sz = iocpage4sz;
6134 } else {
6135 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
6136 ioc->spi_data.pIocPg4 = NULL;
6137 ioc->alloc_total -= iocpage4sz;
6138 }
6139}
6140
6141static void
6142mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6143{
6144 IOCPage1_t *pIoc1;
6145 CONFIGPARMS cfg;
6146 ConfigPageHeader_t header;
6147 dma_addr_t ioc1_dma;
6148 int iocpage1sz = 0;
6149 u32 tmp;
6150
6151 /* Check the Coalescing Timeout in IOC Page 1
6152 */
6153 header.PageVersion = 0;
6154 header.PageLength = 0;
6155 header.PageNumber = 1;
6156 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6157 cfg.cfghdr.hdr = &header;
6158 cfg.physAddr = -1;
6159 cfg.pageAddr = 0;
6160 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6161 cfg.dir = 0;
6162 cfg.timeout = 0;
6163 if (mpt_config(ioc, &cfg) != 0)
6164 return;
6165
6166 if (header.PageLength == 0)
6167 return;
6168
6169 /* Read Header good, alloc memory
6170 */
6171 iocpage1sz = header.PageLength * 4;
6172 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
6173 if (!pIoc1)
6174 return;
6175
6176 /* Read the Page and check coalescing timeout
6177 */
6178 cfg.physAddr = ioc1_dma;
6179 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6180 if (mpt_config(ioc, &cfg) == 0) {
6181
6182 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6183 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6184 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6185
6186 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6187 ioc->name, tmp));
6188
6189 if (tmp > MPT_COALESCING_TIMEOUT) {
6190 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6191
6192 /* Write NVRAM and current
6193 */
6194 cfg.dir = 1;
6195 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6196 if (mpt_config(ioc, &cfg) == 0) {
6197 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6198 ioc->name, MPT_COALESCING_TIMEOUT));
6199
6200 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6201 if (mpt_config(ioc, &cfg) == 0) {
6202 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6203 "Reset NVRAM Coalescing Timeout to = %d\n",
6204 ioc->name, MPT_COALESCING_TIMEOUT));
6205 } else {
6206 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6207 "Reset NVRAM Coalescing Timeout Failed\n",
6208 ioc->name));
6209 }
6210
6211 } else {
6212 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6213 "Reset of Current Coalescing Timeout Failed!\n",
6214 ioc->name));
6215 }
6216 }
6217
6218 } else {
6219 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6220 }
6221 }
6222
6223 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
6224
6225 return;
6226}
6227
6228static void
6229mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6230{
6231 CONFIGPARMS cfg;
6232 ConfigPageHeader_t hdr;
6233 dma_addr_t buf_dma;
6234 ManufacturingPage0_t *pbuf = NULL;
6235
6236 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6237 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6238
6239 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6240 cfg.cfghdr.hdr = &hdr;
6241 cfg.physAddr = -1;
6242 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6243 cfg.timeout = 10;
6244
6245 if (mpt_config(ioc, &cfg) != 0)
6246 goto out;
6247
6248 if (!cfg.cfghdr.hdr->PageLength)
6249 goto out;
6250
6251 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6252 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
6253 if (!pbuf)
6254 goto out;
6255
6256 cfg.physAddr = buf_dma;
6257
6258 if (mpt_config(ioc, &cfg) != 0)
6259 goto out;
6260
6261 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6262 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6263 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6264
6265 out:
6266
6267 if (pbuf)
6268 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
6269}
6270
6271/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6272/**
6273 * SendEventNotification - Send EventNotification (on or off) request to adapter
6274 * @ioc: Pointer to MPT_ADAPTER structure
6275 * @EvSwitch: Event switch flags
6276 * @sleepFlag: Specifies whether the process can sleep
6277 */
6278static int
6279SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6280{
6281 EventNotification_t evn;
6282 MPIDefaultReply_t reply_buf;
6283
6284 memset(&evn, 0, sizeof(EventNotification_t));
6285 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6286
6287 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6288 evn.Switch = EvSwitch;
6289 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6290
6291 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6292 "Sending EventNotification (%d) request %p\n",
6293 ioc->name, EvSwitch, &evn));
6294
6295 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6296 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6297 sleepFlag);
6298}
6299
6300/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6301/**
6302 * SendEventAck - Send EventAck request to MPT adapter.
6303 * @ioc: Pointer to MPT_ADAPTER structure
6304 * @evnp: Pointer to original EventNotification request
6305 */
6306static int
6307SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6308{
6309 EventAck_t *pAck;
6310
6311 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6312 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6313 ioc->name, __func__));
6314 return -1;
6315 }
6316
6317 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6318
6319 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6320 pAck->ChainOffset = 0;
6321 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6322 pAck->MsgFlags = 0;
6323 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6324 pAck->Event = evnp->Event;
6325 pAck->EventContext = evnp->EventContext;
6326
6327 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6328
6329 return 0;
6330}
6331
6332/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6333/**
6334 * mpt_config - Generic function to issue config message
6335 * @ioc: Pointer to an adapter structure
6336 * @pCfg: Pointer to a configuration structure. Struct contains
6337 * action, page address, direction, physical address
6338 * and pointer to a configuration page header
6339 * Page header is updated.
6340 *
6341 * Returns 0 for success
6342 * -EPERM if not allowed due to ISR context
6343 * -EAGAIN if no msg frames currently available
6344 * -EFAULT for non-successful reply or no reply (timeout)
6345 */
6346int
6347mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6348{
6349 Config_t *pReq;
6350 ConfigReply_t *pReply;
6351 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6352 MPT_FRAME_HDR *mf;
6353 int ii;
6354 int flagsLength;
6355 long timeout;
6356 int ret;
6357 u8 page_type = 0, extend_page;
6358 unsigned long timeleft;
6359 unsigned long flags;
6360 int in_isr;
6361 u8 issue_hard_reset = 0;
6362 u8 retry_count = 0;
6363
6364 /* Prevent calling wait_event() (below), if caller happens
6365 * to be in ISR context, because that is fatal!
6366 */
6367 in_isr = in_interrupt();
6368 if (in_isr) {
6369 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
6370 ioc->name));
6371 return -EPERM;
6372 }
6373
6374 /* don't send a config page during diag reset */
6375 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6376 if (ioc->ioc_reset_in_progress) {
6377 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6378 "%s: busy with host reset\n", ioc->name, __func__));
6379 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6380 return -EBUSY;
6381 }
6382 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6383
6384 /* don't send if no chance of success */
6385 if (!ioc->active ||
6386 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6387 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6388 "%s: ioc not operational, %d, %xh\n",
6389 ioc->name, __func__, ioc->active,
6390 mpt_GetIocState(ioc, 0)));
6391 return -EFAULT;
6392 }
6393
6394 retry_config:
6395 mutex_lock(&ioc->mptbase_cmds.mutex);
6396 /* init the internal cmd struct */
6397 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6398 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6399
6400 /* Get and Populate a free Frame
6401 */
6402 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6403 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6404 "mpt_config: no msg frames!\n", ioc->name));
6405 ret = -EAGAIN;
6406 goto out;
6407 }
6408
6409 pReq = (Config_t *)mf;
6410 pReq->Action = pCfg->action;
6411 pReq->Reserved = 0;
6412 pReq->ChainOffset = 0;
6413 pReq->Function = MPI_FUNCTION_CONFIG;
6414
6415 /* Assume page type is not extended and clear "reserved" fields. */
6416 pReq->ExtPageLength = 0;
6417 pReq->ExtPageType = 0;
6418 pReq->MsgFlags = 0;
6419
6420 for (ii=0; ii < 8; ii++)
6421 pReq->Reserved2[ii] = 0;
6422
6423 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6424 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6425 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6426 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6427
6428 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6429 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6430 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6431 pReq->ExtPageType = pExtHdr->ExtPageType;
6432 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6433
6434 /* Page Length must be treated as a reserved field for the
6435 * extended header.
6436 */
6437 pReq->Header.PageLength = 0;
6438 }
6439
6440 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6441
6442 /* Add a SGE to the config request.
6443 */
6444 if (pCfg->dir)
6445 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6446 else
6447 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6448
6449 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6450 MPI_CONFIG_PAGETYPE_EXTENDED) {
6451 flagsLength |= pExtHdr->ExtPageLength * 4;
6452 page_type = pReq->ExtPageType;
6453 extend_page = 1;
6454 } else {
6455 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6456 page_type = pReq->Header.PageType;
6457 extend_page = 0;
6458 }
6459
6460 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6461 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6462 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6463
6464 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6465 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6466 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6467 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6468 timeout);
6469 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6470 ret = -ETIME;
6471 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6472 "Failed Sending Config request type 0x%x, page 0x%x,"
6473 " action %d, status %xh, time left %ld\n\n",
6474 ioc->name, page_type, pReq->Header.PageNumber,
6475 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6476 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6477 goto out;
6478 if (!timeleft) {
6479 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6480 if (ioc->ioc_reset_in_progress) {
6481 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6482 flags);
6483 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6484 " progress mpt_config timed out.!!\n",
6485 __func__, ioc->name);
6486 mutex_unlock(&ioc->mptbase_cmds.mutex);
6487 return -EFAULT;
6488 }
6489 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6490 issue_hard_reset = 1;
6491 }
6492 goto out;
6493 }
6494
6495 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6496 ret = -1;
6497 goto out;
6498 }
6499 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6500 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6501 if (ret == MPI_IOCSTATUS_SUCCESS) {
6502 if (extend_page) {
6503 pCfg->cfghdr.ehdr->ExtPageLength =
6504 le16_to_cpu(pReply->ExtPageLength);
6505 pCfg->cfghdr.ehdr->ExtPageType =
6506 pReply->ExtPageType;
6507 }
6508 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6509 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6510 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6511 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6512
6513 }
6514
6515 if (retry_count)
6516 printk(MYIOC_s_INFO_FMT "Retry completed "
6517 "ret=0x%x timeleft=%ld\n",
6518 ioc->name, ret, timeleft);
6519
6520 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6521 ret, le32_to_cpu(pReply->IOCLogInfo)));
6522
6523out:
6524
6525 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6526 mutex_unlock(&ioc->mptbase_cmds.mutex);
6527 if (issue_hard_reset) {
6528 issue_hard_reset = 0;
6529 printk(MYIOC_s_WARN_FMT
6530 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6531 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6532 if (retry_count == 0) {
6533 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6534 retry_count++;
6535 } else
6536 mpt_HardResetHandler(ioc, CAN_SLEEP);
6537
6538 mpt_free_msg_frame(ioc, mf);
6539 /* attempt one retry for a timed out command */
6540 if (retry_count < 2) {
6541 printk(MYIOC_s_INFO_FMT
6542 "Attempting Retry Config request"
6543 " type 0x%x, page 0x%x,"
6544 " action %d\n", ioc->name, page_type,
6545 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6546 retry_count++;
6547 goto retry_config;
6548 }
6549 }
6550 return ret;
6551
6552}
6553
6554/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6555/**
6556 * mpt_ioc_reset - Base cleanup for hard reset
6557 * @ioc: Pointer to the adapter structure
6558 * @reset_phase: Indicates pre- or post-reset functionality
6559 *
6560 * Remark: Frees resources with internally generated commands.
6561 */
6562static int
6563mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6564{
6565 switch (reset_phase) {
6566 case MPT_IOC_SETUP_RESET:
6567 ioc->taskmgmt_quiesce_io = 1;
6568 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6569 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6570 break;
6571 case MPT_IOC_PRE_RESET:
6572 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6573 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6574 break;
6575 case MPT_IOC_POST_RESET:
6576 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6577 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6578/* wake up mptbase_cmds */
6579 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6580 ioc->mptbase_cmds.status |=
6581 MPT_MGMT_STATUS_DID_IOCRESET;
6582 complete(&ioc->mptbase_cmds.done);
6583 }
6584/* wake up taskmgmt_cmds */
6585 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6586 ioc->taskmgmt_cmds.status |=
6587 MPT_MGMT_STATUS_DID_IOCRESET;
6588 complete(&ioc->taskmgmt_cmds.done);
6589 }
6590 break;
6591 default:
6592 break;
6593 }
6594
6595 return 1; /* currently means nothing really */
6596}
6597
6598
6599#ifdef CONFIG_PROC_FS /* { */
6600/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6601/*
6602 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6603 */
6604/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6605/**
6606 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6607 *
6608 * Returns 0 for success, non-zero for failure.
6609 */
6610static int
6611procmpt_create(void)
6612{
6613 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6614 if (mpt_proc_root_dir == NULL)
6615 return -ENOTDIR;
6616
6617 proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops);
6618 proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops);
6619 return 0;
6620}
6621
6622/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6623/**
6624 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6625 *
6626 * Returns 0 for success, non-zero for failure.
6627 */
6628static void
6629procmpt_destroy(void)
6630{
6631 remove_proc_entry("version", mpt_proc_root_dir);
6632 remove_proc_entry("summary", mpt_proc_root_dir);
6633 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6634}
6635
6636/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6637/*
6638 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6639 */
6640static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6641
6642static int mpt_summary_proc_show(struct seq_file *m, void *v)
6643{
6644 MPT_ADAPTER *ioc = m->private;
6645
6646 if (ioc) {
6647 seq_mpt_print_ioc_summary(ioc, m, 1);
6648 } else {
6649 list_for_each_entry(ioc, &ioc_list, list) {
6650 seq_mpt_print_ioc_summary(ioc, m, 1);
6651 }
6652 }
6653
6654 return 0;
6655}
6656
6657static int mpt_summary_proc_open(struct inode *inode, struct file *file)
6658{
6659 return single_open(file, mpt_summary_proc_show, PDE_DATA(inode));
6660}
6661
6662static const struct file_operations mpt_summary_proc_fops = {
6663 .owner = THIS_MODULE,
6664 .open = mpt_summary_proc_open,
6665 .read = seq_read,
6666 .llseek = seq_lseek,
6667 .release = single_release,
6668};
6669
6670static int mpt_version_proc_show(struct seq_file *m, void *v)
6671{
6672 u8 cb_idx;
6673 int scsi, fc, sas, lan, ctl, targ, dmp;
6674 char *drvname;
6675
6676 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6677 seq_printf(m, " Fusion MPT base driver\n");
6678
6679 scsi = fc = sas = lan = ctl = targ = dmp = 0;
6680 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6681 drvname = NULL;
6682 if (MptCallbacks[cb_idx]) {
6683 switch (MptDriverClass[cb_idx]) {
6684 case MPTSPI_DRIVER:
6685 if (!scsi++) drvname = "SPI host";
6686 break;
6687 case MPTFC_DRIVER:
6688 if (!fc++) drvname = "FC host";
6689 break;
6690 case MPTSAS_DRIVER:
6691 if (!sas++) drvname = "SAS host";
6692 break;
6693 case MPTLAN_DRIVER:
6694 if (!lan++) drvname = "LAN";
6695 break;
6696 case MPTSTM_DRIVER:
6697 if (!targ++) drvname = "SCSI target";
6698 break;
6699 case MPTCTL_DRIVER:
6700 if (!ctl++) drvname = "ioctl";
6701 break;
6702 }
6703
6704 if (drvname)
6705 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6706 }
6707 }
6708
6709 return 0;
6710}
6711
6712static int mpt_version_proc_open(struct inode *inode, struct file *file)
6713{
6714 return single_open(file, mpt_version_proc_show, NULL);
6715}
6716
6717static const struct file_operations mpt_version_proc_fops = {
6718 .owner = THIS_MODULE,
6719 .open = mpt_version_proc_open,
6720 .read = seq_read,
6721 .llseek = seq_lseek,
6722 .release = single_release,
6723};
6724
6725static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6726{
6727 MPT_ADAPTER *ioc = m->private;
6728 char expVer[32];
6729 int sz;
6730 int p;
6731
6732 mpt_get_fw_exp_ver(expVer, ioc);
6733
6734 seq_printf(m, "%s:", ioc->name);
6735 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6736 seq_printf(m, " (f/w download boot flag set)");
6737// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6738// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6739
6740 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6741 ioc->facts.ProductID,
6742 ioc->prod_name);
6743 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6744 if (ioc->facts.FWImageSize)
6745 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6746 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6747 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6748 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6749
6750 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6751 ioc->facts.CurrentHostMfaHighAddr);
6752 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6753 ioc->facts.CurrentSenseBufferHighAddr);
6754
6755 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6756 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6757
6758 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6759 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6760 /*
6761 * Rounding UP to nearest 4-kB boundary here...
6762 */
6763 sz = (ioc->req_sz * ioc->req_depth) + 128;
6764 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6765 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6766 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6767 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6768 4*ioc->facts.RequestFrameSize,
6769 ioc->facts.GlobalCredits);
6770
6771 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6772 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6773 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6774 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6775 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6776 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6777 ioc->facts.CurReplyFrameSize,
6778 ioc->facts.ReplyQueueDepth);
6779
6780 seq_printf(m, " MaxDevices = %d\n",
6781 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6782 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6783
6784 /* per-port info */
6785 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6786 seq_printf(m, " PortNumber = %d (of %d)\n",
6787 p+1,
6788 ioc->facts.NumberOfPorts);
6789 if (ioc->bus_type == FC) {
6790 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6791 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6792 seq_printf(m, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
6793 a[5], a[4], a[3], a[2], a[1], a[0]);
6794 }
6795 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6796 ioc->fc_port_page0[p].WWNN.High,
6797 ioc->fc_port_page0[p].WWNN.Low,
6798 ioc->fc_port_page0[p].WWPN.High,
6799 ioc->fc_port_page0[p].WWPN.Low);
6800 }
6801 }
6802
6803 return 0;
6804}
6805
6806static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file)
6807{
6808 return single_open(file, mpt_iocinfo_proc_show, PDE_DATA(inode));
6809}
6810
6811static const struct file_operations mpt_iocinfo_proc_fops = {
6812 .owner = THIS_MODULE,
6813 .open = mpt_iocinfo_proc_open,
6814 .read = seq_read,
6815 .llseek = seq_lseek,
6816 .release = single_release,
6817};
6818#endif /* CONFIG_PROC_FS } */
6819
6820/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6821static void
6822mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6823{
6824 buf[0] ='\0';
6825 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6826 sprintf(buf, " (Exp %02d%02d)",
6827 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6828 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6829
6830 /* insider hack! */
6831 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6832 strcat(buf, " [MDBG]");
6833 }
6834}
6835
6836/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6837/**
6838 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6839 * @ioc: Pointer to MPT_ADAPTER structure
6840 * @buffer: Pointer to buffer where IOC summary info should be written
6841 * @size: Pointer to number of bytes we wrote (set by this routine)
6842 * @len: Offset at which to start writing in buffer
6843 * @showlan: Display LAN stuff?
6844 *
6845 * This routine writes (english readable) ASCII text, which represents
6846 * a summary of IOC information, to a buffer.
6847 */
6848void
6849mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6850{
6851 char expVer[32];
6852 int y;
6853
6854 mpt_get_fw_exp_ver(expVer, ioc);
6855
6856 /*
6857 * Shorter summary of attached ioc's...
6858 */
6859 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6860 ioc->name,
6861 ioc->prod_name,
6862 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6863 ioc->facts.FWVersion.Word,
6864 expVer,
6865 ioc->facts.NumberOfPorts,
6866 ioc->req_depth);
6867
6868 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6869 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6870 y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
6871 a[5], a[4], a[3], a[2], a[1], a[0]);
6872 }
6873
6874 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6875
6876 if (!ioc->active)
6877 y += sprintf(buffer+len+y, " (disabled)");
6878
6879 y += sprintf(buffer+len+y, "\n");
6880
6881 *size = y;
6882}
6883
6884static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6885{
6886 char expVer[32];
6887
6888 mpt_get_fw_exp_ver(expVer, ioc);
6889
6890 /*
6891 * Shorter summary of attached ioc's...
6892 */
6893 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6894 ioc->name,
6895 ioc->prod_name,
6896 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6897 ioc->facts.FWVersion.Word,
6898 expVer,
6899 ioc->facts.NumberOfPorts,
6900 ioc->req_depth);
6901
6902 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6903 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6904 seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
6905 a[5], a[4], a[3], a[2], a[1], a[0]);
6906 }
6907
6908 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6909
6910 if (!ioc->active)
6911 seq_printf(m, " (disabled)");
6912
6913 seq_putc(m, '\n');
6914}
6915
6916/**
6917 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6918 * @ioc: Pointer to MPT_ADAPTER structure
6919 *
6920 * Returns 0 for SUCCESS or -1 if FAILED.
6921 *
6922 * If -1 is return, then it was not possible to set the flags
6923 **/
6924int
6925mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6926{
6927 unsigned long flags;
6928 int retval;
6929
6930 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6931 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6932 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6933 retval = -1;
6934 goto out;
6935 }
6936 retval = 0;
6937 ioc->taskmgmt_in_progress = 1;
6938 ioc->taskmgmt_quiesce_io = 1;
6939 if (ioc->alt_ioc) {
6940 ioc->alt_ioc->taskmgmt_in_progress = 1;
6941 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6942 }
6943 out:
6944 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6945 return retval;
6946}
6947EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6948
6949/**
6950 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6951 * @ioc: Pointer to MPT_ADAPTER structure
6952 *
6953 **/
6954void
6955mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6956{
6957 unsigned long flags;
6958
6959 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6960 ioc->taskmgmt_in_progress = 0;
6961 ioc->taskmgmt_quiesce_io = 0;
6962 if (ioc->alt_ioc) {
6963 ioc->alt_ioc->taskmgmt_in_progress = 0;
6964 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6965 }
6966 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6967}
6968EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6969
6970
6971/**
6972 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6973 * the kernel
6974 * @ioc: Pointer to MPT_ADAPTER structure
6975 *
6976 **/
6977void
6978mpt_halt_firmware(MPT_ADAPTER *ioc)
6979{
6980 u32 ioc_raw_state;
6981
6982 ioc_raw_state = mpt_GetIocState(ioc, 0);
6983
6984 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6985 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6986 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6987 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6988 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6989 } else {
6990 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6991 panic("%s: Firmware is halted due to command timeout\n",
6992 ioc->name);
6993 }
6994}
6995EXPORT_SYMBOL(mpt_halt_firmware);
6996
6997/**
6998 * mpt_SoftResetHandler - Issues a less expensive reset
6999 * @ioc: Pointer to MPT_ADAPTER structure
7000 * @sleepFlag: Indicates if sleep or schedule must be called.
7001 *
7002 * Returns 0 for SUCCESS or -1 if FAILED.
7003 *
7004 * Message Unit Reset - instructs the IOC to reset the Reply Post and
7005 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
7006 * All posted buffers are freed, and event notification is turned off.
7007 * IOC doesn't reply to any outstanding request. This will transfer IOC
7008 * to READY state.
7009 **/
7010int
7011mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7012{
7013 int rc;
7014 int ii;
7015 u8 cb_idx;
7016 unsigned long flags;
7017 u32 ioc_state;
7018 unsigned long time_count;
7019
7020 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
7021 ioc->name));
7022
7023 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7024
7025 if (mpt_fwfault_debug)
7026 mpt_halt_firmware(ioc);
7027
7028 if (ioc_state == MPI_IOC_STATE_FAULT ||
7029 ioc_state == MPI_IOC_STATE_RESET) {
7030 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7031 "skipping, either in FAULT or RESET state!\n", ioc->name));
7032 return -1;
7033 }
7034
7035 if (ioc->bus_type == FC) {
7036 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7037 "skipping, because the bus type is FC!\n", ioc->name));
7038 return -1;
7039 }
7040
7041 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7042 if (ioc->ioc_reset_in_progress) {
7043 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7044 return -1;
7045 }
7046 ioc->ioc_reset_in_progress = 1;
7047 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7048
7049 rc = -1;
7050
7051 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7052 if (MptResetHandlers[cb_idx])
7053 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7054 }
7055
7056 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7057 if (ioc->taskmgmt_in_progress) {
7058 ioc->ioc_reset_in_progress = 0;
7059 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7060 return -1;
7061 }
7062 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7063 /* Disable reply interrupts (also blocks FreeQ) */
7064 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7065 ioc->active = 0;
7066 time_count = jiffies;
7067
7068 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7069
7070 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7071 if (MptResetHandlers[cb_idx])
7072 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7073 }
7074
7075 if (rc)
7076 goto out;
7077
7078 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7079 if (ioc_state != MPI_IOC_STATE_READY)
7080 goto out;
7081
7082 for (ii = 0; ii < 5; ii++) {
7083 /* Get IOC facts! Allow 5 retries */
7084 rc = GetIocFacts(ioc, sleepFlag,
7085 MPT_HOSTEVENT_IOC_RECOVER);
7086 if (rc == 0)
7087 break;
7088 if (sleepFlag == CAN_SLEEP)
7089 msleep(100);
7090 else
7091 mdelay(100);
7092 }
7093 if (ii == 5)
7094 goto out;
7095
7096 rc = PrimeIocFifos(ioc);
7097 if (rc != 0)
7098 goto out;
7099
7100 rc = SendIocInit(ioc, sleepFlag);
7101 if (rc != 0)
7102 goto out;
7103
7104 rc = SendEventNotification(ioc, 1, sleepFlag);
7105 if (rc != 0)
7106 goto out;
7107
7108 if (ioc->hard_resets < -1)
7109 ioc->hard_resets++;
7110
7111 /*
7112 * At this point, we know soft reset succeeded.
7113 */
7114
7115 ioc->active = 1;
7116 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7117
7118 out:
7119 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7120 ioc->ioc_reset_in_progress = 0;
7121 ioc->taskmgmt_quiesce_io = 0;
7122 ioc->taskmgmt_in_progress = 0;
7123 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7124
7125 if (ioc->active) { /* otherwise, hard reset coming */
7126 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7127 if (MptResetHandlers[cb_idx])
7128 mpt_signal_reset(cb_idx, ioc,
7129 MPT_IOC_POST_RESET);
7130 }
7131 }
7132
7133 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7134 "SoftResetHandler: completed (%d seconds): %s\n",
7135 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7136 ((rc == 0) ? "SUCCESS" : "FAILED")));
7137
7138 return rc;
7139}
7140
7141/**
7142 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7143 * @ioc: Pointer to MPT_ADAPTER structure
7144 * @sleepFlag: Indicates if sleep or schedule must be called.
7145 *
7146 * Returns 0 for SUCCESS or -1 if FAILED.
7147 * Try for softreset first, only if it fails go for expensive
7148 * HardReset.
7149 **/
7150int
7151mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7152 int ret = -1;
7153
7154 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7155 if (ret == 0)
7156 return ret;
7157 ret = mpt_HardResetHandler(ioc, sleepFlag);
7158 return ret;
7159}
7160EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7161
7162/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7163/*
7164 * Reset Handling
7165 */
7166/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7167/**
7168 * mpt_HardResetHandler - Generic reset handler
7169 * @ioc: Pointer to MPT_ADAPTER structure
7170 * @sleepFlag: Indicates if sleep or schedule must be called.
7171 *
7172 * Issues SCSI Task Management call based on input arg values.
7173 * If TaskMgmt fails, returns associated SCSI request.
7174 *
7175 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7176 * or a non-interrupt thread. In the former, must not call schedule().
7177 *
7178 * Note: A return of -1 is a FATAL error case, as it means a
7179 * FW reload/initialization failed.
7180 *
7181 * Returns 0 for SUCCESS or -1 if FAILED.
7182 */
7183int
7184mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7185{
7186 int rc;
7187 u8 cb_idx;
7188 unsigned long flags;
7189 unsigned long time_count;
7190
7191 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7192#ifdef MFCNT
7193 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7194 printk("MF count 0x%x !\n", ioc->mfcnt);
7195#endif
7196 if (mpt_fwfault_debug)
7197 mpt_halt_firmware(ioc);
7198
7199 /* Reset the adapter. Prevent more than 1 call to
7200 * mpt_do_ioc_recovery at any instant in time.
7201 */
7202 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7203 if (ioc->ioc_reset_in_progress) {
7204 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7205 ioc->wait_on_reset_completion = 1;
7206 do {
7207 ssleep(1);
7208 } while (ioc->ioc_reset_in_progress == 1);
7209 ioc->wait_on_reset_completion = 0;
7210 return ioc->reset_status;
7211 }
7212 if (ioc->wait_on_reset_completion) {
7213 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7214 rc = 0;
7215 time_count = jiffies;
7216 goto exit;
7217 }
7218 ioc->ioc_reset_in_progress = 1;
7219 if (ioc->alt_ioc)
7220 ioc->alt_ioc->ioc_reset_in_progress = 1;
7221 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7222
7223
7224 /* The SCSI driver needs to adjust timeouts on all current
7225 * commands prior to the diagnostic reset being issued.
7226 * Prevents timeouts occurring during a diagnostic reset...very bad.
7227 * For all other protocol drivers, this is a no-op.
7228 */
7229 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7230 if (MptResetHandlers[cb_idx]) {
7231 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7232 if (ioc->alt_ioc)
7233 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7234 MPT_IOC_SETUP_RESET);
7235 }
7236 }
7237
7238 time_count = jiffies;
7239 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7240 if (rc != 0) {
7241 printk(KERN_WARNING MYNAM
7242 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7243 rc, ioc->name, mpt_GetIocState(ioc, 0));
7244 } else {
7245 if (ioc->hard_resets < -1)
7246 ioc->hard_resets++;
7247 }
7248
7249 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7250 ioc->ioc_reset_in_progress = 0;
7251 ioc->taskmgmt_quiesce_io = 0;
7252 ioc->taskmgmt_in_progress = 0;
7253 ioc->reset_status = rc;
7254 if (ioc->alt_ioc) {
7255 ioc->alt_ioc->ioc_reset_in_progress = 0;
7256 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7257 ioc->alt_ioc->taskmgmt_in_progress = 0;
7258 }
7259 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7260
7261 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7262 if (MptResetHandlers[cb_idx]) {
7263 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7264 if (ioc->alt_ioc)
7265 mpt_signal_reset(cb_idx,
7266 ioc->alt_ioc, MPT_IOC_POST_RESET);
7267 }
7268 }
7269exit:
7270 dtmprintk(ioc,
7271 printk(MYIOC_s_DEBUG_FMT
7272 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7273 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7274 "SUCCESS" : "FAILED")));
7275
7276 return rc;
7277}
7278
7279#ifdef CONFIG_FUSION_LOGGING
7280static void
7281mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7282{
7283 char *ds = NULL;
7284 u32 evData0;
7285 int ii;
7286 u8 event;
7287 char *evStr = ioc->evStr;
7288
7289 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7290 evData0 = le32_to_cpu(pEventReply->Data[0]);
7291
7292 switch(event) {
7293 case MPI_EVENT_NONE:
7294 ds = "None";
7295 break;
7296 case MPI_EVENT_LOG_DATA:
7297 ds = "Log Data";
7298 break;
7299 case MPI_EVENT_STATE_CHANGE:
7300 ds = "State Change";
7301 break;
7302 case MPI_EVENT_UNIT_ATTENTION:
7303 ds = "Unit Attention";
7304 break;
7305 case MPI_EVENT_IOC_BUS_RESET:
7306 ds = "IOC Bus Reset";
7307 break;
7308 case MPI_EVENT_EXT_BUS_RESET:
7309 ds = "External Bus Reset";
7310 break;
7311 case MPI_EVENT_RESCAN:
7312 ds = "Bus Rescan Event";
7313 break;
7314 case MPI_EVENT_LINK_STATUS_CHANGE:
7315 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7316 ds = "Link Status(FAILURE) Change";
7317 else
7318 ds = "Link Status(ACTIVE) Change";
7319 break;
7320 case MPI_EVENT_LOOP_STATE_CHANGE:
7321 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7322 ds = "Loop State(LIP) Change";
7323 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7324 ds = "Loop State(LPE) Change";
7325 else
7326 ds = "Loop State(LPB) Change";
7327 break;
7328 case MPI_EVENT_LOGOUT:
7329 ds = "Logout";
7330 break;
7331 case MPI_EVENT_EVENT_CHANGE:
7332 if (evData0)
7333 ds = "Events ON";
7334 else
7335 ds = "Events OFF";
7336 break;
7337 case MPI_EVENT_INTEGRATED_RAID:
7338 {
7339 u8 ReasonCode = (u8)(evData0 >> 16);
7340 switch (ReasonCode) {
7341 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7342 ds = "Integrated Raid: Volume Created";
7343 break;
7344 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7345 ds = "Integrated Raid: Volume Deleted";
7346 break;
7347 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7348 ds = "Integrated Raid: Volume Settings Changed";
7349 break;
7350 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7351 ds = "Integrated Raid: Volume Status Changed";
7352 break;
7353 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7354 ds = "Integrated Raid: Volume Physdisk Changed";
7355 break;
7356 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7357 ds = "Integrated Raid: Physdisk Created";
7358 break;
7359 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7360 ds = "Integrated Raid: Physdisk Deleted";
7361 break;
7362 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7363 ds = "Integrated Raid: Physdisk Settings Changed";
7364 break;
7365 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7366 ds = "Integrated Raid: Physdisk Status Changed";
7367 break;
7368 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7369 ds = "Integrated Raid: Domain Validation Needed";
7370 break;
7371 case MPI_EVENT_RAID_RC_SMART_DATA :
7372 ds = "Integrated Raid; Smart Data";
7373 break;
7374 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7375 ds = "Integrated Raid: Replace Action Started";
7376 break;
7377 default:
7378 ds = "Integrated Raid";
7379 break;
7380 }
7381 break;
7382 }
7383 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7384 ds = "SCSI Device Status Change";
7385 break;
7386 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7387 {
7388 u8 id = (u8)(evData0);
7389 u8 channel = (u8)(evData0 >> 8);
7390 u8 ReasonCode = (u8)(evData0 >> 16);
7391 switch (ReasonCode) {
7392 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7393 snprintf(evStr, EVENT_DESCR_STR_SZ,
7394 "SAS Device Status Change: Added: "
7395 "id=%d channel=%d", id, channel);
7396 break;
7397 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7398 snprintf(evStr, EVENT_DESCR_STR_SZ,
7399 "SAS Device Status Change: Deleted: "
7400 "id=%d channel=%d", id, channel);
7401 break;
7402 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7403 snprintf(evStr, EVENT_DESCR_STR_SZ,
7404 "SAS Device Status Change: SMART Data: "
7405 "id=%d channel=%d", id, channel);
7406 break;
7407 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7408 snprintf(evStr, EVENT_DESCR_STR_SZ,
7409 "SAS Device Status Change: No Persistancy: "
7410 "id=%d channel=%d", id, channel);
7411 break;
7412 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7413 snprintf(evStr, EVENT_DESCR_STR_SZ,
7414 "SAS Device Status Change: Unsupported Device "
7415 "Discovered : id=%d channel=%d", id, channel);
7416 break;
7417 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7418 snprintf(evStr, EVENT_DESCR_STR_SZ,
7419 "SAS Device Status Change: Internal Device "
7420 "Reset : id=%d channel=%d", id, channel);
7421 break;
7422 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7423 snprintf(evStr, EVENT_DESCR_STR_SZ,
7424 "SAS Device Status Change: Internal Task "
7425 "Abort : id=%d channel=%d", id, channel);
7426 break;
7427 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7428 snprintf(evStr, EVENT_DESCR_STR_SZ,
7429 "SAS Device Status Change: Internal Abort "
7430 "Task Set : id=%d channel=%d", id, channel);
7431 break;
7432 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7433 snprintf(evStr, EVENT_DESCR_STR_SZ,
7434 "SAS Device Status Change: Internal Clear "
7435 "Task Set : id=%d channel=%d", id, channel);
7436 break;
7437 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7438 snprintf(evStr, EVENT_DESCR_STR_SZ,
7439 "SAS Device Status Change: Internal Query "
7440 "Task : id=%d channel=%d", id, channel);
7441 break;
7442 default:
7443 snprintf(evStr, EVENT_DESCR_STR_SZ,
7444 "SAS Device Status Change: Unknown: "
7445 "id=%d channel=%d", id, channel);
7446 break;
7447 }
7448 break;
7449 }
7450 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7451 ds = "Bus Timer Expired";
7452 break;
7453 case MPI_EVENT_QUEUE_FULL:
7454 {
7455 u16 curr_depth = (u16)(evData0 >> 16);
7456 u8 channel = (u8)(evData0 >> 8);
7457 u8 id = (u8)(evData0);
7458
7459 snprintf(evStr, EVENT_DESCR_STR_SZ,
7460 "Queue Full: channel=%d id=%d depth=%d",
7461 channel, id, curr_depth);
7462 break;
7463 }
7464 case MPI_EVENT_SAS_SES:
7465 ds = "SAS SES Event";
7466 break;
7467 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7468 ds = "Persistent Table Full";
7469 break;
7470 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7471 {
7472 u8 LinkRates = (u8)(evData0 >> 8);
7473 u8 PhyNumber = (u8)(evData0);
7474 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7475 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7476 switch (LinkRates) {
7477 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7478 snprintf(evStr, EVENT_DESCR_STR_SZ,
7479 "SAS PHY Link Status: Phy=%d:"
7480 " Rate Unknown",PhyNumber);
7481 break;
7482 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7483 snprintf(evStr, EVENT_DESCR_STR_SZ,
7484 "SAS PHY Link Status: Phy=%d:"
7485 " Phy Disabled",PhyNumber);
7486 break;
7487 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7488 snprintf(evStr, EVENT_DESCR_STR_SZ,
7489 "SAS PHY Link Status: Phy=%d:"
7490 " Failed Speed Nego",PhyNumber);
7491 break;
7492 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7493 snprintf(evStr, EVENT_DESCR_STR_SZ,
7494 "SAS PHY Link Status: Phy=%d:"
7495 " Sata OOB Completed",PhyNumber);
7496 break;
7497 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7498 snprintf(evStr, EVENT_DESCR_STR_SZ,
7499 "SAS PHY Link Status: Phy=%d:"
7500 " Rate 1.5 Gbps",PhyNumber);
7501 break;
7502 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7503 snprintf(evStr, EVENT_DESCR_STR_SZ,
7504 "SAS PHY Link Status: Phy=%d:"
7505 " Rate 3.0 Gbps", PhyNumber);
7506 break;
7507 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7508 snprintf(evStr, EVENT_DESCR_STR_SZ,
7509 "SAS PHY Link Status: Phy=%d:"
7510 " Rate 6.0 Gbps", PhyNumber);
7511 break;
7512 default:
7513 snprintf(evStr, EVENT_DESCR_STR_SZ,
7514 "SAS PHY Link Status: Phy=%d", PhyNumber);
7515 break;
7516 }
7517 break;
7518 }
7519 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7520 ds = "SAS Discovery Error";
7521 break;
7522 case MPI_EVENT_IR_RESYNC_UPDATE:
7523 {
7524 u8 resync_complete = (u8)(evData0 >> 16);
7525 snprintf(evStr, EVENT_DESCR_STR_SZ,
7526 "IR Resync Update: Complete = %d:",resync_complete);
7527 break;
7528 }
7529 case MPI_EVENT_IR2:
7530 {
7531 u8 id = (u8)(evData0);
7532 u8 channel = (u8)(evData0 >> 8);
7533 u8 phys_num = (u8)(evData0 >> 24);
7534 u8 ReasonCode = (u8)(evData0 >> 16);
7535
7536 switch (ReasonCode) {
7537 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7538 snprintf(evStr, EVENT_DESCR_STR_SZ,
7539 "IR2: LD State Changed: "
7540 "id=%d channel=%d phys_num=%d",
7541 id, channel, phys_num);
7542 break;
7543 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7544 snprintf(evStr, EVENT_DESCR_STR_SZ,
7545 "IR2: PD State Changed "
7546 "id=%d channel=%d phys_num=%d",
7547 id, channel, phys_num);
7548 break;
7549 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7550 snprintf(evStr, EVENT_DESCR_STR_SZ,
7551 "IR2: Bad Block Table Full: "
7552 "id=%d channel=%d phys_num=%d",
7553 id, channel, phys_num);
7554 break;
7555 case MPI_EVENT_IR2_RC_PD_INSERTED:
7556 snprintf(evStr, EVENT_DESCR_STR_SZ,
7557 "IR2: PD Inserted: "
7558 "id=%d channel=%d phys_num=%d",
7559 id, channel, phys_num);
7560 break;
7561 case MPI_EVENT_IR2_RC_PD_REMOVED:
7562 snprintf(evStr, EVENT_DESCR_STR_SZ,
7563 "IR2: PD Removed: "
7564 "id=%d channel=%d phys_num=%d",
7565 id, channel, phys_num);
7566 break;
7567 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7568 snprintf(evStr, EVENT_DESCR_STR_SZ,
7569 "IR2: Foreign CFG Detected: "
7570 "id=%d channel=%d phys_num=%d",
7571 id, channel, phys_num);
7572 break;
7573 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7574 snprintf(evStr, EVENT_DESCR_STR_SZ,
7575 "IR2: Rebuild Medium Error: "
7576 "id=%d channel=%d phys_num=%d",
7577 id, channel, phys_num);
7578 break;
7579 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7580 snprintf(evStr, EVENT_DESCR_STR_SZ,
7581 "IR2: Dual Port Added: "
7582 "id=%d channel=%d phys_num=%d",
7583 id, channel, phys_num);
7584 break;
7585 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7586 snprintf(evStr, EVENT_DESCR_STR_SZ,
7587 "IR2: Dual Port Removed: "
7588 "id=%d channel=%d phys_num=%d",
7589 id, channel, phys_num);
7590 break;
7591 default:
7592 ds = "IR2";
7593 break;
7594 }
7595 break;
7596 }
7597 case MPI_EVENT_SAS_DISCOVERY:
7598 {
7599 if (evData0)
7600 ds = "SAS Discovery: Start";
7601 else
7602 ds = "SAS Discovery: Stop";
7603 break;
7604 }
7605 case MPI_EVENT_LOG_ENTRY_ADDED:
7606 ds = "SAS Log Entry Added";
7607 break;
7608
7609 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7610 {
7611 u8 phy_num = (u8)(evData0);
7612 u8 port_num = (u8)(evData0 >> 8);
7613 u8 port_width = (u8)(evData0 >> 16);
7614 u8 primative = (u8)(evData0 >> 24);
7615 snprintf(evStr, EVENT_DESCR_STR_SZ,
7616 "SAS Broadcase Primative: phy=%d port=%d "
7617 "width=%d primative=0x%02x",
7618 phy_num, port_num, port_width, primative);
7619 break;
7620 }
7621
7622 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7623 {
7624 u8 reason = (u8)(evData0);
7625
7626 switch (reason) {
7627 case MPI_EVENT_SAS_INIT_RC_ADDED:
7628 ds = "SAS Initiator Status Change: Added";
7629 break;
7630 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7631 ds = "SAS Initiator Status Change: Deleted";
7632 break;
7633 default:
7634 ds = "SAS Initiator Status Change";
7635 break;
7636 }
7637 break;
7638 }
7639
7640 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7641 {
7642 u8 max_init = (u8)(evData0);
7643 u8 current_init = (u8)(evData0 >> 8);
7644
7645 snprintf(evStr, EVENT_DESCR_STR_SZ,
7646 "SAS Initiator Device Table Overflow: max initiators=%02d "
7647 "current initators=%02d",
7648 max_init, current_init);
7649 break;
7650 }
7651 case MPI_EVENT_SAS_SMP_ERROR:
7652 {
7653 u8 status = (u8)(evData0);
7654 u8 port_num = (u8)(evData0 >> 8);
7655 u8 result = (u8)(evData0 >> 16);
7656
7657 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7658 snprintf(evStr, EVENT_DESCR_STR_SZ,
7659 "SAS SMP Error: port=%d result=0x%02x",
7660 port_num, result);
7661 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7662 snprintf(evStr, EVENT_DESCR_STR_SZ,
7663 "SAS SMP Error: port=%d : CRC Error",
7664 port_num);
7665 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7666 snprintf(evStr, EVENT_DESCR_STR_SZ,
7667 "SAS SMP Error: port=%d : Timeout",
7668 port_num);
7669 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7670 snprintf(evStr, EVENT_DESCR_STR_SZ,
7671 "SAS SMP Error: port=%d : No Destination",
7672 port_num);
7673 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7674 snprintf(evStr, EVENT_DESCR_STR_SZ,
7675 "SAS SMP Error: port=%d : Bad Destination",
7676 port_num);
7677 else
7678 snprintf(evStr, EVENT_DESCR_STR_SZ,
7679 "SAS SMP Error: port=%d : status=0x%02x",
7680 port_num, status);
7681 break;
7682 }
7683
7684 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7685 {
7686 u8 reason = (u8)(evData0);
7687
7688 switch (reason) {
7689 case MPI_EVENT_SAS_EXP_RC_ADDED:
7690 ds = "Expander Status Change: Added";
7691 break;
7692 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7693 ds = "Expander Status Change: Deleted";
7694 break;
7695 default:
7696 ds = "Expander Status Change";
7697 break;
7698 }
7699 break;
7700 }
7701
7702 /*
7703 * MPT base "custom" events may be added here...
7704 */
7705 default:
7706 ds = "Unknown";
7707 break;
7708 }
7709 if (ds)
7710 strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
7711
7712
7713 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7714 "MPT event:(%02Xh) : %s\n",
7715 ioc->name, event, evStr));
7716
7717 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7718 ": Event data:\n"));
7719 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7720 devtverboseprintk(ioc, printk(" %08x",
7721 le32_to_cpu(pEventReply->Data[ii])));
7722 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7723}
7724#endif
7725/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7726/**
7727 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7728 * @ioc: Pointer to MPT_ADAPTER structure
7729 * @pEventReply: Pointer to EventNotification reply frame
7730 * @evHandlers: Pointer to integer, number of event handlers
7731 *
7732 * Routes a received EventNotificationReply to all currently registered
7733 * event handlers.
7734 * Returns sum of event handlers return values.
7735 */
7736static int
7737ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7738{
7739 u16 evDataLen;
7740 u32 evData0 = 0;
7741 int ii;
7742 u8 cb_idx;
7743 int r = 0;
7744 int handlers = 0;
7745 u8 event;
7746
7747 /*
7748 * Do platform normalization of values
7749 */
7750 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7751 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7752 if (evDataLen) {
7753 evData0 = le32_to_cpu(pEventReply->Data[0]);
7754 }
7755
7756#ifdef CONFIG_FUSION_LOGGING
7757 if (evDataLen)
7758 mpt_display_event_info(ioc, pEventReply);
7759#endif
7760
7761 /*
7762 * Do general / base driver event processing
7763 */
7764 switch(event) {
7765 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7766 if (evDataLen) {
7767 u8 evState = evData0 & 0xFF;
7768
7769 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7770
7771 /* Update EventState field in cached IocFacts */
7772 if (ioc->facts.Function) {
7773 ioc->facts.EventState = evState;
7774 }
7775 }
7776 break;
7777 case MPI_EVENT_INTEGRATED_RAID:
7778 mptbase_raid_process_event_data(ioc,
7779 (MpiEventDataRaid_t *)pEventReply->Data);
7780 break;
7781 default:
7782 break;
7783 }
7784
7785 /*
7786 * Should this event be logged? Events are written sequentially.
7787 * When buffer is full, start again at the top.
7788 */
7789 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7790 int idx;
7791
7792 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7793
7794 ioc->events[idx].event = event;
7795 ioc->events[idx].eventContext = ioc->eventContext;
7796
7797 for (ii = 0; ii < 2; ii++) {
7798 if (ii < evDataLen)
7799 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7800 else
7801 ioc->events[idx].data[ii] = 0;
7802 }
7803
7804 ioc->eventContext++;
7805 }
7806
7807
7808 /*
7809 * Call each currently registered protocol event handler.
7810 */
7811 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7812 if (MptEvHandlers[cb_idx]) {
7813 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7814 "Routing Event to event handler #%d\n",
7815 ioc->name, cb_idx));
7816 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7817 handlers++;
7818 }
7819 }
7820 /* FIXME? Examine results here? */
7821
7822 /*
7823 * If needed, send (a single) EventAck.
7824 */
7825 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7826 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7827 "EventAck required\n",ioc->name));
7828 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7829 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7830 ioc->name, ii));
7831 }
7832 }
7833
7834 *evHandlers = handlers;
7835 return r;
7836}
7837
7838/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7839/**
7840 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7841 * @ioc: Pointer to MPT_ADAPTER structure
7842 * @log_info: U32 LogInfo reply word from the IOC
7843 *
7844 * Refer to lsi/mpi_log_fc.h.
7845 */
7846static void
7847mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7848{
7849 char *desc = "unknown";
7850
7851 switch (log_info & 0xFF000000) {
7852 case MPI_IOCLOGINFO_FC_INIT_BASE:
7853 desc = "FCP Initiator";
7854 break;
7855 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7856 desc = "FCP Target";
7857 break;
7858 case MPI_IOCLOGINFO_FC_LAN_BASE:
7859 desc = "LAN";
7860 break;
7861 case MPI_IOCLOGINFO_FC_MSG_BASE:
7862 desc = "MPI Message Layer";
7863 break;
7864 case MPI_IOCLOGINFO_FC_LINK_BASE:
7865 desc = "FC Link";
7866 break;
7867 case MPI_IOCLOGINFO_FC_CTX_BASE:
7868 desc = "Context Manager";
7869 break;
7870 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7871 desc = "Invalid Field Offset";
7872 break;
7873 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7874 desc = "State Change Info";
7875 break;
7876 }
7877
7878 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7879 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7880}
7881
7882/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7883/**
7884 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7885 * @ioc: Pointer to MPT_ADAPTER structure
7886 * @log_info: U32 LogInfo word from the IOC
7887 *
7888 * Refer to lsi/sp_log.h.
7889 */
7890static void
7891mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7892{
7893 u32 info = log_info & 0x00FF0000;
7894 char *desc = "unknown";
7895
7896 switch (info) {
7897 case 0x00010000:
7898 desc = "bug! MID not found";
7899 break;
7900
7901 case 0x00020000:
7902 desc = "Parity Error";
7903 break;
7904
7905 case 0x00030000:
7906 desc = "ASYNC Outbound Overrun";
7907 break;
7908
7909 case 0x00040000:
7910 desc = "SYNC Offset Error";
7911 break;
7912
7913 case 0x00050000:
7914 desc = "BM Change";
7915 break;
7916
7917 case 0x00060000:
7918 desc = "Msg In Overflow";
7919 break;
7920
7921 case 0x00070000:
7922 desc = "DMA Error";
7923 break;
7924
7925 case 0x00080000:
7926 desc = "Outbound DMA Overrun";
7927 break;
7928
7929 case 0x00090000:
7930 desc = "Task Management";
7931 break;
7932
7933 case 0x000A0000:
7934 desc = "Device Problem";
7935 break;
7936
7937 case 0x000B0000:
7938 desc = "Invalid Phase Change";
7939 break;
7940
7941 case 0x000C0000:
7942 desc = "Untagged Table Size";
7943 break;
7944
7945 }
7946
7947 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7948}
7949
7950/* strings for sas loginfo */
7951 static char *originator_str[] = {
7952 "IOP", /* 00h */
7953 "PL", /* 01h */
7954 "IR" /* 02h */
7955 };
7956 static char *iop_code_str[] = {
7957 NULL, /* 00h */
7958 "Invalid SAS Address", /* 01h */
7959 NULL, /* 02h */
7960 "Invalid Page", /* 03h */
7961 "Diag Message Error", /* 04h */
7962 "Task Terminated", /* 05h */
7963 "Enclosure Management", /* 06h */
7964 "Target Mode" /* 07h */
7965 };
7966 static char *pl_code_str[] = {
7967 NULL, /* 00h */
7968 "Open Failure", /* 01h */
7969 "Invalid Scatter Gather List", /* 02h */
7970 "Wrong Relative Offset or Frame Length", /* 03h */
7971 "Frame Transfer Error", /* 04h */
7972 "Transmit Frame Connected Low", /* 05h */
7973 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7974 "SATA Read Log Receive Data Error", /* 07h */
7975 "SATA NCQ Fail All Commands After Error", /* 08h */
7976 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7977 "Receive Frame Invalid Message", /* 0Ah */
7978 "Receive Context Message Valid Error", /* 0Bh */
7979 "Receive Frame Current Frame Error", /* 0Ch */
7980 "SATA Link Down", /* 0Dh */
7981 "Discovery SATA Init W IOS", /* 0Eh */
7982 "Config Invalid Page", /* 0Fh */
7983 "Discovery SATA Init Timeout", /* 10h */
7984 "Reset", /* 11h */
7985 "Abort", /* 12h */
7986 "IO Not Yet Executed", /* 13h */
7987 "IO Executed", /* 14h */
7988 "Persistent Reservation Out Not Affiliation "
7989 "Owner", /* 15h */
7990 "Open Transmit DMA Abort", /* 16h */
7991 "IO Device Missing Delay Retry", /* 17h */
7992 "IO Cancelled Due to Receive Error", /* 18h */
7993 NULL, /* 19h */
7994 NULL, /* 1Ah */
7995 NULL, /* 1Bh */
7996 NULL, /* 1Ch */
7997 NULL, /* 1Dh */
7998 NULL, /* 1Eh */
7999 NULL, /* 1Fh */
8000 "Enclosure Management" /* 20h */
8001 };
8002 static char *ir_code_str[] = {
8003 "Raid Action Error", /* 00h */
8004 NULL, /* 00h */
8005 NULL, /* 01h */
8006 NULL, /* 02h */
8007 NULL, /* 03h */
8008 NULL, /* 04h */
8009 NULL, /* 05h */
8010 NULL, /* 06h */
8011 NULL /* 07h */
8012 };
8013 static char *raid_sub_code_str[] = {
8014 NULL, /* 00h */
8015 "Volume Creation Failed: Data Passed too "
8016 "Large", /* 01h */
8017 "Volume Creation Failed: Duplicate Volumes "
8018 "Attempted", /* 02h */
8019 "Volume Creation Failed: Max Number "
8020 "Supported Volumes Exceeded", /* 03h */
8021 "Volume Creation Failed: DMA Error", /* 04h */
8022 "Volume Creation Failed: Invalid Volume Type", /* 05h */
8023 "Volume Creation Failed: Error Reading "
8024 "MFG Page 4", /* 06h */
8025 "Volume Creation Failed: Creating Internal "
8026 "Structures", /* 07h */
8027 NULL, /* 08h */
8028 NULL, /* 09h */
8029 NULL, /* 0Ah */
8030 NULL, /* 0Bh */
8031 NULL, /* 0Ch */
8032 NULL, /* 0Dh */
8033 NULL, /* 0Eh */
8034 NULL, /* 0Fh */
8035 "Activation failed: Already Active Volume", /* 10h */
8036 "Activation failed: Unsupported Volume Type", /* 11h */
8037 "Activation failed: Too Many Active Volumes", /* 12h */
8038 "Activation failed: Volume ID in Use", /* 13h */
8039 "Activation failed: Reported Failure", /* 14h */
8040 "Activation failed: Importing a Volume", /* 15h */
8041 NULL, /* 16h */
8042 NULL, /* 17h */
8043 NULL, /* 18h */
8044 NULL, /* 19h */
8045 NULL, /* 1Ah */
8046 NULL, /* 1Bh */
8047 NULL, /* 1Ch */
8048 NULL, /* 1Dh */
8049 NULL, /* 1Eh */
8050 NULL, /* 1Fh */
8051 "Phys Disk failed: Too Many Phys Disks", /* 20h */
8052 "Phys Disk failed: Data Passed too Large", /* 21h */
8053 "Phys Disk failed: DMA Error", /* 22h */
8054 "Phys Disk failed: Invalid <channel:id>", /* 23h */
8055 "Phys Disk failed: Creating Phys Disk Config "
8056 "Page", /* 24h */
8057 NULL, /* 25h */
8058 NULL, /* 26h */
8059 NULL, /* 27h */
8060 NULL, /* 28h */
8061 NULL, /* 29h */
8062 NULL, /* 2Ah */
8063 NULL, /* 2Bh */
8064 NULL, /* 2Ch */
8065 NULL, /* 2Dh */
8066 NULL, /* 2Eh */
8067 NULL, /* 2Fh */
8068 "Compatibility Error: IR Disabled", /* 30h */
8069 "Compatibility Error: Inquiry Command Failed", /* 31h */
8070 "Compatibility Error: Device not Direct Access "
8071 "Device ", /* 32h */
8072 "Compatibility Error: Removable Device Found", /* 33h */
8073 "Compatibility Error: Device SCSI Version not "
8074 "2 or Higher", /* 34h */
8075 "Compatibility Error: SATA Device, 48 BIT LBA "
8076 "not Supported", /* 35h */
8077 "Compatibility Error: Device doesn't have "
8078 "512 Byte Block Sizes", /* 36h */
8079 "Compatibility Error: Volume Type Check Failed", /* 37h */
8080 "Compatibility Error: Volume Type is "
8081 "Unsupported by FW", /* 38h */
8082 "Compatibility Error: Disk Drive too Small for "
8083 "use in Volume", /* 39h */
8084 "Compatibility Error: Phys Disk for Create "
8085 "Volume not Found", /* 3Ah */
8086 "Compatibility Error: Too Many or too Few "
8087 "Disks for Volume Type", /* 3Bh */
8088 "Compatibility Error: Disk stripe Sizes "
8089 "Must be 64KB", /* 3Ch */
8090 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8091 };
8092
8093/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8094/**
8095 * mpt_sas_log_info - Log information returned from SAS IOC.
8096 * @ioc: Pointer to MPT_ADAPTER structure
8097 * @log_info: U32 LogInfo reply word from the IOC
8098 * @cb_idx: callback function's handle
8099 *
8100 * Refer to lsi/mpi_log_sas.h.
8101 **/
8102static void
8103mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8104{
8105union loginfo_type {
8106 u32 loginfo;
8107 struct {
8108 u32 subcode:16;
8109 u32 code:8;
8110 u32 originator:4;
8111 u32 bus_type:4;
8112 }dw;
8113};
8114 union loginfo_type sas_loginfo;
8115 char *originator_desc = NULL;
8116 char *code_desc = NULL;
8117 char *sub_code_desc = NULL;
8118
8119 sas_loginfo.loginfo = log_info;
8120 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8121 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8122 return;
8123
8124 originator_desc = originator_str[sas_loginfo.dw.originator];
8125
8126 switch (sas_loginfo.dw.originator) {
8127
8128 case 0: /* IOP */
8129 if (sas_loginfo.dw.code <
8130 ARRAY_SIZE(iop_code_str))
8131 code_desc = iop_code_str[sas_loginfo.dw.code];
8132 break;
8133 case 1: /* PL */
8134 if (sas_loginfo.dw.code <
8135 ARRAY_SIZE(pl_code_str))
8136 code_desc = pl_code_str[sas_loginfo.dw.code];
8137 break;
8138 case 2: /* IR */
8139 if (sas_loginfo.dw.code >=
8140 ARRAY_SIZE(ir_code_str))
8141 break;
8142 code_desc = ir_code_str[sas_loginfo.dw.code];
8143 if (sas_loginfo.dw.subcode >=
8144 ARRAY_SIZE(raid_sub_code_str))
8145 break;
8146 if (sas_loginfo.dw.code == 0)
8147 sub_code_desc =
8148 raid_sub_code_str[sas_loginfo.dw.subcode];
8149 break;
8150 default:
8151 return;
8152 }
8153
8154 if (sub_code_desc != NULL)
8155 printk(MYIOC_s_INFO_FMT
8156 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8157 " SubCode={%s} cb_idx %s\n",
8158 ioc->name, log_info, originator_desc, code_desc,
8159 sub_code_desc, MptCallbacksName[cb_idx]);
8160 else if (code_desc != NULL)
8161 printk(MYIOC_s_INFO_FMT
8162 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8163 " SubCode(0x%04x) cb_idx %s\n",
8164 ioc->name, log_info, originator_desc, code_desc,
8165 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8166 else
8167 printk(MYIOC_s_INFO_FMT
8168 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8169 " SubCode(0x%04x) cb_idx %s\n",
8170 ioc->name, log_info, originator_desc,
8171 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8172 MptCallbacksName[cb_idx]);
8173}
8174
8175/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8176/**
8177 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8178 * @ioc: Pointer to MPT_ADAPTER structure
8179 * @ioc_status: U32 IOCStatus word from IOC
8180 * @mf: Pointer to MPT request frame
8181 *
8182 * Refer to lsi/mpi.h.
8183 **/
8184static void
8185mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8186{
8187 Config_t *pReq = (Config_t *)mf;
8188 char extend_desc[EVENT_DESCR_STR_SZ];
8189 char *desc = NULL;
8190 u32 form;
8191 u8 page_type;
8192
8193 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8194 page_type = pReq->ExtPageType;
8195 else
8196 page_type = pReq->Header.PageType;
8197
8198 /*
8199 * ignore invalid page messages for GET_NEXT_HANDLE
8200 */
8201 form = le32_to_cpu(pReq->PageAddress);
8202 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8203 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8204 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8205 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8206 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8207 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8208 return;
8209 }
8210 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8211 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8212 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8213 return;
8214 }
8215
8216 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8217 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8218 page_type, pReq->Header.PageNumber, pReq->Action, form);
8219
8220 switch (ioc_status) {
8221
8222 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8223 desc = "Config Page Invalid Action";
8224 break;
8225
8226 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8227 desc = "Config Page Invalid Type";
8228 break;
8229
8230 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8231 desc = "Config Page Invalid Page";
8232 break;
8233
8234 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8235 desc = "Config Page Invalid Data";
8236 break;
8237
8238 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8239 desc = "Config Page No Defaults";
8240 break;
8241
8242 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8243 desc = "Config Page Can't Commit";
8244 break;
8245 }
8246
8247 if (!desc)
8248 return;
8249
8250 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8251 ioc->name, ioc_status, desc, extend_desc));
8252}
8253
8254/**
8255 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8256 * @ioc: Pointer to MPT_ADAPTER structure
8257 * @ioc_status: U32 IOCStatus word from IOC
8258 * @mf: Pointer to MPT request frame
8259 *
8260 * Refer to lsi/mpi.h.
8261 **/
8262static void
8263mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8264{
8265 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8266 char *desc = NULL;
8267
8268 switch (status) {
8269
8270/****************************************************************************/
8271/* Common IOCStatus values for all replies */
8272/****************************************************************************/
8273
8274 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8275 desc = "Invalid Function";
8276 break;
8277
8278 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8279 desc = "Busy";
8280 break;
8281
8282 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8283 desc = "Invalid SGL";
8284 break;
8285
8286 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8287 desc = "Internal Error";
8288 break;
8289
8290 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8291 desc = "Reserved";
8292 break;
8293
8294 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8295 desc = "Insufficient Resources";
8296 break;
8297
8298 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8299 desc = "Invalid Field";
8300 break;
8301
8302 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8303 desc = "Invalid State";
8304 break;
8305
8306/****************************************************************************/
8307/* Config IOCStatus values */
8308/****************************************************************************/
8309
8310 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8311 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8312 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8313 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8314 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8315 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8316 mpt_iocstatus_info_config(ioc, status, mf);
8317 break;
8318
8319/****************************************************************************/
8320/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8321/* */
8322/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8323/* */
8324/****************************************************************************/
8325
8326 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8327 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8328 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8329 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8330 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8331 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8332 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8333 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8334 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8335 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8336 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8337 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8338 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8339 break;
8340
8341/****************************************************************************/
8342/* SCSI Target values */
8343/****************************************************************************/
8344
8345 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8346 desc = "Target: Priority IO";
8347 break;
8348
8349 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8350 desc = "Target: Invalid Port";
8351 break;
8352
8353 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8354 desc = "Target Invalid IO Index:";
8355 break;
8356
8357 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8358 desc = "Target: Aborted";
8359 break;
8360
8361 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8362 desc = "Target: No Conn Retryable";
8363 break;
8364
8365 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8366 desc = "Target: No Connection";
8367 break;
8368
8369 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8370 desc = "Target: Transfer Count Mismatch";
8371 break;
8372
8373 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8374 desc = "Target: STS Data not Sent";
8375 break;
8376
8377 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8378 desc = "Target: Data Offset Error";
8379 break;
8380
8381 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8382 desc = "Target: Too Much Write Data";
8383 break;
8384
8385 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8386 desc = "Target: IU Too Short";
8387 break;
8388
8389 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8390 desc = "Target: ACK NAK Timeout";
8391 break;
8392
8393 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8394 desc = "Target: Nak Received";
8395 break;
8396
8397/****************************************************************************/
8398/* Fibre Channel Direct Access values */
8399/****************************************************************************/
8400
8401 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8402 desc = "FC: Aborted";
8403 break;
8404
8405 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8406 desc = "FC: RX ID Invalid";
8407 break;
8408
8409 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8410 desc = "FC: DID Invalid";
8411 break;
8412
8413 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8414 desc = "FC: Node Logged Out";
8415 break;
8416
8417 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8418 desc = "FC: Exchange Canceled";
8419 break;
8420
8421/****************************************************************************/
8422/* LAN values */
8423/****************************************************************************/
8424
8425 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8426 desc = "LAN: Device not Found";
8427 break;
8428
8429 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8430 desc = "LAN: Device Failure";
8431 break;
8432
8433 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8434 desc = "LAN: Transmit Error";
8435 break;
8436
8437 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8438 desc = "LAN: Transmit Aborted";
8439 break;
8440
8441 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8442 desc = "LAN: Receive Error";
8443 break;
8444
8445 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8446 desc = "LAN: Receive Aborted";
8447 break;
8448
8449 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8450 desc = "LAN: Partial Packet";
8451 break;
8452
8453 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8454 desc = "LAN: Canceled";
8455 break;
8456
8457/****************************************************************************/
8458/* Serial Attached SCSI values */
8459/****************************************************************************/
8460
8461 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8462 desc = "SAS: SMP Request Failed";
8463 break;
8464
8465 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8466 desc = "SAS: SMP Data Overrun";
8467 break;
8468
8469 default:
8470 desc = "Others";
8471 break;
8472 }
8473
8474 if (!desc)
8475 return;
8476
8477 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8478 ioc->name, status, desc));
8479}
8480
8481/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8482EXPORT_SYMBOL(mpt_attach);
8483EXPORT_SYMBOL(mpt_detach);
8484#ifdef CONFIG_PM
8485EXPORT_SYMBOL(mpt_resume);
8486EXPORT_SYMBOL(mpt_suspend);
8487#endif
8488EXPORT_SYMBOL(ioc_list);
8489EXPORT_SYMBOL(mpt_register);
8490EXPORT_SYMBOL(mpt_deregister);
8491EXPORT_SYMBOL(mpt_event_register);
8492EXPORT_SYMBOL(mpt_event_deregister);
8493EXPORT_SYMBOL(mpt_reset_register);
8494EXPORT_SYMBOL(mpt_reset_deregister);
8495EXPORT_SYMBOL(mpt_device_driver_register);
8496EXPORT_SYMBOL(mpt_device_driver_deregister);
8497EXPORT_SYMBOL(mpt_get_msg_frame);
8498EXPORT_SYMBOL(mpt_put_msg_frame);
8499EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8500EXPORT_SYMBOL(mpt_free_msg_frame);
8501EXPORT_SYMBOL(mpt_send_handshake_request);
8502EXPORT_SYMBOL(mpt_verify_adapter);
8503EXPORT_SYMBOL(mpt_GetIocState);
8504EXPORT_SYMBOL(mpt_print_ioc_summary);
8505EXPORT_SYMBOL(mpt_HardResetHandler);
8506EXPORT_SYMBOL(mpt_config);
8507EXPORT_SYMBOL(mpt_findImVolumes);
8508EXPORT_SYMBOL(mpt_alloc_fw_memory);
8509EXPORT_SYMBOL(mpt_free_fw_memory);
8510EXPORT_SYMBOL(mptbase_sas_persist_operation);
8511EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8512
8513/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8514/**
8515 * fusion_init - Fusion MPT base driver initialization routine.
8516 *
8517 * Returns 0 for success, non-zero for failure.
8518 */
8519static int __init
8520fusion_init(void)
8521{
8522 u8 cb_idx;
8523
8524 show_mptmod_ver(my_NAME, my_VERSION);
8525 printk(KERN_INFO COPYRIGHT "\n");
8526
8527 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8528 MptCallbacks[cb_idx] = NULL;
8529 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8530 MptEvHandlers[cb_idx] = NULL;
8531 MptResetHandlers[cb_idx] = NULL;
8532 }
8533
8534 /* Register ourselves (mptbase) in order to facilitate
8535 * EventNotification handling.
8536 */
8537 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8538 "mptbase_reply");
8539
8540 /* Register for hard reset handling callbacks.
8541 */
8542 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8543
8544#ifdef CONFIG_PROC_FS
8545 (void) procmpt_create();
8546#endif
8547 return 0;
8548}
8549
8550/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8551/**
8552 * fusion_exit - Perform driver unload cleanup.
8553 *
8554 * This routine frees all resources associated with each MPT adapter
8555 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8556 */
8557static void __exit
8558fusion_exit(void)
8559{
8560
8561 mpt_reset_deregister(mpt_base_index);
8562
8563#ifdef CONFIG_PROC_FS
8564 procmpt_destroy();
8565#endif
8566}
8567
8568module_init(fusion_init);
8569module_exit(fusion_exit);
1/*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13/*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46*/
47/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49#include <linux/kernel.h>
50#include <linux/module.h>
51#include <linux/errno.h>
52#include <linux/init.h>
53#include <linux/seq_file.h>
54#include <linux/slab.h>
55#include <linux/types.h>
56#include <linux/pci.h>
57#include <linux/kdev_t.h>
58#include <linux/blkdev.h>
59#include <linux/delay.h>
60#include <linux/interrupt.h>
61#include <linux/dma-mapping.h>
62#include <linux/kthread.h>
63#include <scsi/scsi_host.h>
64
65#include "mptbase.h"
66#include "lsi/mpi_log_fc.h"
67
68/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
69#define my_NAME "Fusion MPT base driver"
70#define my_VERSION MPT_LINUX_VERSION_COMMON
71#define MYNAM "mptbase"
72
73MODULE_AUTHOR(MODULEAUTHOR);
74MODULE_DESCRIPTION(my_NAME);
75MODULE_LICENSE("GPL");
76MODULE_VERSION(my_VERSION);
77
78/*
79 * cmd line parameters
80 */
81
82static int mpt_msi_enable_spi;
83module_param(mpt_msi_enable_spi, int, 0);
84MODULE_PARM_DESC(mpt_msi_enable_spi,
85 " Enable MSI Support for SPI controllers (default=0)");
86
87static int mpt_msi_enable_fc;
88module_param(mpt_msi_enable_fc, int, 0);
89MODULE_PARM_DESC(mpt_msi_enable_fc,
90 " Enable MSI Support for FC controllers (default=0)");
91
92static int mpt_msi_enable_sas;
93module_param(mpt_msi_enable_sas, int, 0);
94MODULE_PARM_DESC(mpt_msi_enable_sas,
95 " Enable MSI Support for SAS controllers (default=0)");
96
97static int mpt_channel_mapping;
98module_param(mpt_channel_mapping, int, 0);
99MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
100
101static int mpt_debug_level;
102static int mpt_set_debug_level(const char *val, const struct kernel_param *kp);
103module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
104 &mpt_debug_level, 0600);
105MODULE_PARM_DESC(mpt_debug_level,
106 " debug level - refer to mptdebug.h - (default=0)");
107
108int mpt_fwfault_debug;
109EXPORT_SYMBOL(mpt_fwfault_debug);
110module_param(mpt_fwfault_debug, int, 0600);
111MODULE_PARM_DESC(mpt_fwfault_debug,
112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
113
114static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
115 [MPT_MAX_CALLBACKNAME_LEN+1];
116
117#ifdef MFCNT
118static int mfcounter = 0;
119#define PRINT_MF_COUNT 20000
120#endif
121
122/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123/*
124 * Public data...
125 */
126
127#define WHOINIT_UNKNOWN 0xAA
128
129/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
130/*
131 * Private data...
132 */
133 /* Adapter link list */
134LIST_HEAD(ioc_list);
135 /* Callback lookup table */
136static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
137 /* Protocol driver class lookup table */
138static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
139 /* Event handler lookup table */
140static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
141 /* Reset handler lookup table */
142static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
143static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
144
145#ifdef CONFIG_PROC_FS
146static struct proc_dir_entry *mpt_proc_root_dir;
147#endif
148
149/*
150 * Driver Callback Index's
151 */
152static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
153static u8 last_drv_idx;
154
155/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
156/*
157 * Forward protos...
158 */
159static irqreturn_t mpt_interrupt(int irq, void *bus_id);
160static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
161 MPT_FRAME_HDR *reply);
162static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
163 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
164 int sleepFlag);
165static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
166static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
167static void mpt_adapter_disable(MPT_ADAPTER *ioc);
168static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
169
170static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
171static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
172static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
173static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
174static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
175static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
176static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
177static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
178static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
179static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
180static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
181static int PrimeIocFifos(MPT_ADAPTER *ioc);
182static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
183static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
184static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
185static int GetLanConfigPages(MPT_ADAPTER *ioc);
186static int GetIoUnitPage2(MPT_ADAPTER *ioc);
187int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
188static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
189static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
190static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
191static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
192static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
193static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
194 int sleepFlag);
195static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
196static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
197static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
198
199#ifdef CONFIG_PROC_FS
200static int mpt_summary_proc_show(struct seq_file *m, void *v);
201static int mpt_version_proc_show(struct seq_file *m, void *v);
202static int mpt_iocinfo_proc_show(struct seq_file *m, void *v);
203#endif
204static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
205
206static int ProcessEventNotification(MPT_ADAPTER *ioc,
207 EventNotificationReply_t *evReply, int *evHandlers);
208static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
209static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
210static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
211static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
212static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
213static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
214
215/* module entry point */
216static int __init fusion_init (void);
217static void __exit fusion_exit (void);
218
219#define CHIPREG_READ32(addr) readl_relaxed(addr)
220#define CHIPREG_READ32_dmasync(addr) readl(addr)
221#define CHIPREG_WRITE32(addr,val) writel(val, addr)
222#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
223#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
224
225static void
226pci_disable_io_access(struct pci_dev *pdev)
227{
228 u16 command_reg;
229
230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
231 command_reg &= ~1;
232 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
233}
234
235static void
236pci_enable_io_access(struct pci_dev *pdev)
237{
238 u16 command_reg;
239
240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
241 command_reg |= 1;
242 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
243}
244
245static int mpt_set_debug_level(const char *val, const struct kernel_param *kp)
246{
247 int ret = param_set_int(val, kp);
248 MPT_ADAPTER *ioc;
249
250 if (ret)
251 return ret;
252
253 list_for_each_entry(ioc, &ioc_list, list)
254 ioc->debug_level = mpt_debug_level;
255 return 0;
256}
257
258/**
259 * mpt_get_cb_idx - obtain cb_idx for registered driver
260 * @dclass: class driver enum
261 *
262 * Returns cb_idx, or zero means it wasn't found
263 **/
264static u8
265mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
266{
267 u8 cb_idx;
268
269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
270 if (MptDriverClass[cb_idx] == dclass)
271 return cb_idx;
272 return 0;
273}
274
275/**
276 * mpt_is_discovery_complete - determine if discovery has completed
277 * @ioc: per adatper instance
278 *
279 * Returns 1 when discovery completed, else zero.
280 */
281static int
282mpt_is_discovery_complete(MPT_ADAPTER *ioc)
283{
284 ConfigExtendedPageHeader_t hdr;
285 CONFIGPARMS cfg;
286 SasIOUnitPage0_t *buffer;
287 dma_addr_t dma_handle;
288 int rc = 0;
289
290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
291 memset(&cfg, 0, sizeof(CONFIGPARMS));
292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
295 cfg.cfghdr.ehdr = &hdr;
296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
297
298 if ((mpt_config(ioc, &cfg)))
299 goto out;
300 if (!hdr.ExtPageLength)
301 goto out;
302
303 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4,
304 &dma_handle, GFP_KERNEL);
305 if (!buffer)
306 goto out;
307
308 cfg.physAddr = dma_handle;
309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
310
311 if ((mpt_config(ioc, &cfg)))
312 goto out_free_consistent;
313
314 if (!(buffer->PhyData[0].PortFlags &
315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
316 rc = 1;
317
318 out_free_consistent:
319 dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer,
320 dma_handle);
321 out:
322 return rc;
323}
324
325
326/**
327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
328 * @arg: input argument, used to derive ioc
329 *
330 * Return 0 if controller is removed from pci subsystem.
331 * Return -1 for other case.
332 */
333static int mpt_remove_dead_ioc_func(void *arg)
334{
335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
336 struct pci_dev *pdev;
337
338 if (!ioc)
339 return -1;
340
341 pdev = ioc->pcidev;
342 if (!pdev)
343 return -1;
344
345 pci_stop_and_remove_bus_device_locked(pdev);
346 return 0;
347}
348
349
350
351/**
352 * mpt_fault_reset_work - work performed on workq after ioc fault
353 * @work: input argument, used to derive ioc
354 *
355**/
356static void
357mpt_fault_reset_work(struct work_struct *work)
358{
359 MPT_ADAPTER *ioc =
360 container_of(work, MPT_ADAPTER, fault_reset_work.work);
361 u32 ioc_raw_state;
362 int rc;
363 unsigned long flags;
364 MPT_SCSI_HOST *hd;
365 struct task_struct *p;
366
367 if (ioc->ioc_reset_in_progress || !ioc->active)
368 goto out;
369
370
371 ioc_raw_state = mpt_GetIocState(ioc, 0);
372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
374 ioc->name, __func__);
375
376 /*
377 * Call mptscsih_flush_pending_cmds callback so that we
378 * flush all pending commands back to OS.
379 * This call is required to aovid deadlock at block layer.
380 * Dead IOC will fail to do diag reset,and this call is safe
381 * since dead ioc will never return any command back from HW.
382 */
383 hd = shost_priv(ioc->sh);
384 ioc->schedule_dead_ioc_flush_running_cmds(hd);
385
386 /*Remove the Dead Host */
387 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
388 "mpt_dead_ioc_%d", ioc->id);
389 if (IS_ERR(p)) {
390 printk(MYIOC_s_ERR_FMT
391 "%s: Running mpt_dead_ioc thread failed !\n",
392 ioc->name, __func__);
393 } else {
394 printk(MYIOC_s_WARN_FMT
395 "%s: Running mpt_dead_ioc thread success !\n",
396 ioc->name, __func__);
397 }
398 return; /* don't rearm timer */
399 }
400
401 if ((ioc_raw_state & MPI_IOC_STATE_MASK)
402 == MPI_IOC_STATE_FAULT) {
403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
406 ioc->name, __func__);
407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
409 __func__, (rc == 0) ? "success" : "failed");
410 ioc_raw_state = mpt_GetIocState(ioc, 0);
411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
413 "reset (%04xh)\n", ioc->name, ioc_raw_state &
414 MPI_DOORBELL_DATA_MASK);
415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
416 if ((mpt_is_discovery_complete(ioc))) {
417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
418 "discovery_quiesce_io flag\n", ioc->name));
419 ioc->sas_discovery_quiesce_io = 0;
420 }
421 }
422
423 out:
424 /*
425 * Take turns polling alternate controller
426 */
427 if (ioc->alt_ioc)
428 ioc = ioc->alt_ioc;
429
430 /* rearm the timer */
431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
432 if (ioc->reset_work_q)
433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
434 msecs_to_jiffies(MPT_POLLING_INTERVAL));
435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
436}
437
438
439/*
440 * Process turbo (context) reply...
441 */
442static void
443mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
444{
445 MPT_FRAME_HDR *mf = NULL;
446 MPT_FRAME_HDR *mr = NULL;
447 u16 req_idx = 0;
448 u8 cb_idx;
449
450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
451 ioc->name, pa));
452
453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
455 req_idx = pa & 0x0000FFFF;
456 cb_idx = (pa & 0x00FF0000) >> 16;
457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
458 break;
459 case MPI_CONTEXT_REPLY_TYPE_LAN:
460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
461 /*
462 * Blind set of mf to NULL here was fatal
463 * after lan_reply says "freeme"
464 * Fix sort of combined with an optimization here;
465 * added explicit check for case where lan_reply
466 * was just returning 1 and doing nothing else.
467 * For this case skip the callback, but set up
468 * proper mf value first here:-)
469 */
470 if ((pa & 0x58000000) == 0x58000000) {
471 req_idx = pa & 0x0000FFFF;
472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
473 mpt_free_msg_frame(ioc, mf);
474 mb();
475 return;
476 }
477 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
478 break;
479 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
480 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
481 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
482 break;
483 default:
484 cb_idx = 0;
485 BUG();
486 }
487
488 /* Check for (valid) IO callback! */
489 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
490 MptCallbacks[cb_idx] == NULL) {
491 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
492 __func__, ioc->name, cb_idx);
493 goto out;
494 }
495
496 if (MptCallbacks[cb_idx](ioc, mf, mr))
497 mpt_free_msg_frame(ioc, mf);
498 out:
499 mb();
500}
501
502static void
503mpt_reply(MPT_ADAPTER *ioc, u32 pa)
504{
505 MPT_FRAME_HDR *mf;
506 MPT_FRAME_HDR *mr;
507 u16 req_idx;
508 u8 cb_idx;
509 int freeme;
510
511 u32 reply_dma_low;
512 u16 ioc_stat;
513
514 /* non-TURBO reply! Hmmm, something may be up...
515 * Newest turbo reply mechanism; get address
516 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
517 */
518
519 /* Map DMA address of reply header to cpu address.
520 * pa is 32 bits - but the dma address may be 32 or 64 bits
521 * get offset based only only the low addresses
522 */
523
524 reply_dma_low = (pa <<= 1);
525 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
526 (reply_dma_low - ioc->reply_frames_low_dma));
527
528 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
529 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
530 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
531
532 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
533 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
534 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
535
536 /* Check/log IOC log info
537 */
538 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
539 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
540 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
541 if (ioc->bus_type == FC)
542 mpt_fc_log_info(ioc, log_info);
543 else if (ioc->bus_type == SPI)
544 mpt_spi_log_info(ioc, log_info);
545 else if (ioc->bus_type == SAS)
546 mpt_sas_log_info(ioc, log_info, cb_idx);
547 }
548
549 if (ioc_stat & MPI_IOCSTATUS_MASK)
550 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
551
552 /* Check for (valid) IO callback! */
553 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
554 MptCallbacks[cb_idx] == NULL) {
555 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
556 __func__, ioc->name, cb_idx);
557 freeme = 0;
558 goto out;
559 }
560
561 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
562
563 out:
564 /* Flush (non-TURBO) reply with a WRITE! */
565 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
566
567 if (freeme)
568 mpt_free_msg_frame(ioc, mf);
569 mb();
570}
571
572/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
573/**
574 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
575 * @irq: irq number (not used)
576 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
577 *
578 * This routine is registered via the request_irq() kernel API call,
579 * and handles all interrupts generated from a specific MPT adapter
580 * (also referred to as a IO Controller or IOC).
581 * This routine must clear the interrupt from the adapter and does
582 * so by reading the reply FIFO. Multiple replies may be processed
583 * per single call to this routine.
584 *
585 * This routine handles register-level access of the adapter but
586 * dispatches (calls) a protocol-specific callback routine to handle
587 * the protocol-specific details of the MPT request completion.
588 */
589static irqreturn_t
590mpt_interrupt(int irq, void *bus_id)
591{
592 MPT_ADAPTER *ioc = bus_id;
593 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
594
595 if (pa == 0xFFFFFFFF)
596 return IRQ_NONE;
597
598 /*
599 * Drain the reply FIFO!
600 */
601 do {
602 if (pa & MPI_ADDRESS_REPLY_A_BIT)
603 mpt_reply(ioc, pa);
604 else
605 mpt_turbo_reply(ioc, pa);
606 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
607 } while (pa != 0xFFFFFFFF);
608
609 return IRQ_HANDLED;
610}
611
612/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
613/**
614 * mptbase_reply - MPT base driver's callback routine
615 * @ioc: Pointer to MPT_ADAPTER structure
616 * @req: Pointer to original MPT request frame
617 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
618 *
619 * MPT base driver's callback routine; all base driver
620 * "internal" request/reply processing is routed here.
621 * Currently used for EventNotification and EventAck handling.
622 *
623 * Returns 1 indicating original alloc'd request frame ptr
624 * should be freed, or 0 if it shouldn't.
625 */
626static int
627mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
628{
629 EventNotificationReply_t *pEventReply;
630 u8 event;
631 int evHandlers;
632 int freereq = 1;
633
634 switch (reply->u.hdr.Function) {
635 case MPI_FUNCTION_EVENT_NOTIFICATION:
636 pEventReply = (EventNotificationReply_t *)reply;
637 evHandlers = 0;
638 ProcessEventNotification(ioc, pEventReply, &evHandlers);
639 event = le32_to_cpu(pEventReply->Event) & 0xFF;
640 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
641 freereq = 0;
642 if (event != MPI_EVENT_EVENT_CHANGE)
643 break;
644 fallthrough;
645 case MPI_FUNCTION_CONFIG:
646 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
647 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
649 memcpy(ioc->mptbase_cmds.reply, reply,
650 min(MPT_DEFAULT_FRAME_SIZE,
651 4 * reply->u.reply.MsgLength));
652 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
653 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
654 complete(&ioc->mptbase_cmds.done);
655 } else
656 freereq = 0;
657 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
658 freereq = 1;
659 break;
660 case MPI_FUNCTION_EVENT_ACK:
661 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
662 "EventAck reply received\n", ioc->name));
663 break;
664 default:
665 printk(MYIOC_s_ERR_FMT
666 "Unexpected msg function (=%02Xh) reply received!\n",
667 ioc->name, reply->u.hdr.Function);
668 break;
669 }
670
671 /*
672 * Conditionally tell caller to free the original
673 * EventNotification/EventAck/unexpected request frame!
674 */
675 return freereq;
676}
677
678/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
679/**
680 * mpt_register - Register protocol-specific main callback handler.
681 * @cbfunc: callback function pointer
682 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
683 * @func_name: call function's name
684 *
685 * This routine is called by a protocol-specific driver (SCSI host,
686 * LAN, SCSI target) to register its reply callback routine. Each
687 * protocol-specific driver must do this before it will be able to
688 * use any IOC resources, such as obtaining request frames.
689 *
690 * NOTES: The SCSI protocol driver currently calls this routine thrice
691 * in order to register separate callbacks; one for "normal" SCSI IO;
692 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
693 *
694 * Returns u8 valued "handle" in the range (and S.O.D. order)
695 * {N,...,7,6,5,...,1} if successful.
696 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
697 * considered an error by the caller.
698 */
699u8
700mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
701{
702 u8 cb_idx;
703 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
704
705 /*
706 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
707 * (slot/handle 0 is reserved!)
708 */
709 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
710 if (MptCallbacks[cb_idx] == NULL) {
711 MptCallbacks[cb_idx] = cbfunc;
712 MptDriverClass[cb_idx] = dclass;
713 MptEvHandlers[cb_idx] = NULL;
714 last_drv_idx = cb_idx;
715 strscpy(MptCallbacksName[cb_idx], func_name,
716 MPT_MAX_CALLBACKNAME_LEN+1);
717 break;
718 }
719 }
720
721 return last_drv_idx;
722}
723
724/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
725/**
726 * mpt_deregister - Deregister a protocol drivers resources.
727 * @cb_idx: previously registered callback handle
728 *
729 * Each protocol-specific driver should call this routine when its
730 * module is unloaded.
731 */
732void
733mpt_deregister(u8 cb_idx)
734{
735 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
736 MptCallbacks[cb_idx] = NULL;
737 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
738 MptEvHandlers[cb_idx] = NULL;
739
740 last_drv_idx++;
741 }
742}
743
744/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
745/**
746 * mpt_event_register - Register protocol-specific event callback handler.
747 * @cb_idx: previously registered (via mpt_register) callback handle
748 * @ev_cbfunc: callback function
749 *
750 * This routine can be called by one or more protocol-specific drivers
751 * if/when they choose to be notified of MPT events.
752 *
753 * Returns 0 for success.
754 */
755int
756mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
757{
758 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
759 return -1;
760
761 MptEvHandlers[cb_idx] = ev_cbfunc;
762 return 0;
763}
764
765/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
766/**
767 * mpt_event_deregister - Deregister protocol-specific event callback handler
768 * @cb_idx: previously registered callback handle
769 *
770 * Each protocol-specific driver should call this routine
771 * when it does not (or can no longer) handle events,
772 * or when its module is unloaded.
773 */
774void
775mpt_event_deregister(u8 cb_idx)
776{
777 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
778 return;
779
780 MptEvHandlers[cb_idx] = NULL;
781}
782
783/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
784/**
785 * mpt_reset_register - Register protocol-specific IOC reset handler.
786 * @cb_idx: previously registered (via mpt_register) callback handle
787 * @reset_func: reset function
788 *
789 * This routine can be called by one or more protocol-specific drivers
790 * if/when they choose to be notified of IOC resets.
791 *
792 * Returns 0 for success.
793 */
794int
795mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
796{
797 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
798 return -1;
799
800 MptResetHandlers[cb_idx] = reset_func;
801 return 0;
802}
803
804/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
805/**
806 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
807 * @cb_idx: previously registered callback handle
808 *
809 * Each protocol-specific driver should call this routine
810 * when it does not (or can no longer) handle IOC reset handling,
811 * or when its module is unloaded.
812 */
813void
814mpt_reset_deregister(u8 cb_idx)
815{
816 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
817 return;
818
819 MptResetHandlers[cb_idx] = NULL;
820}
821
822/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
823/**
824 * mpt_device_driver_register - Register device driver hooks
825 * @dd_cbfunc: driver callbacks struct
826 * @cb_idx: MPT protocol driver index
827 */
828int
829mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
830{
831 MPT_ADAPTER *ioc;
832
833 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
834 return -EINVAL;
835
836 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
837
838 /* call per pci device probe entry point */
839 list_for_each_entry(ioc, &ioc_list, list) {
840 if (dd_cbfunc->probe)
841 dd_cbfunc->probe(ioc->pcidev);
842 }
843
844 return 0;
845}
846
847/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
848/**
849 * mpt_device_driver_deregister - DeRegister device driver hooks
850 * @cb_idx: MPT protocol driver index
851 */
852void
853mpt_device_driver_deregister(u8 cb_idx)
854{
855 struct mpt_pci_driver *dd_cbfunc;
856 MPT_ADAPTER *ioc;
857
858 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
859 return;
860
861 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
862
863 list_for_each_entry(ioc, &ioc_list, list) {
864 if (dd_cbfunc->remove)
865 dd_cbfunc->remove(ioc->pcidev);
866 }
867
868 MptDeviceDriverHandlers[cb_idx] = NULL;
869}
870
871
872/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
873/**
874 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
875 * @cb_idx: Handle of registered MPT protocol driver
876 * @ioc: Pointer to MPT adapter structure
877 *
878 * Obtain an MPT request frame from the pool (of 1024) that are
879 * allocated per MPT adapter.
880 *
881 * Returns pointer to a MPT request frame or %NULL if none are available
882 * or IOC is not active.
883 */
884MPT_FRAME_HDR*
885mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
886{
887 MPT_FRAME_HDR *mf;
888 unsigned long flags;
889 u16 req_idx; /* Request index */
890
891 /* validate handle and ioc identifier */
892
893#ifdef MFCNT
894 if (!ioc->active)
895 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
896 "returning NULL!\n", ioc->name);
897#endif
898
899 /* If interrupts are not attached, do not return a request frame */
900 if (!ioc->active)
901 return NULL;
902
903 spin_lock_irqsave(&ioc->FreeQlock, flags);
904 if (!list_empty(&ioc->FreeQ)) {
905 int req_offset;
906
907 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
908 u.frame.linkage.list);
909 list_del(&mf->u.frame.linkage.list);
910 mf->u.frame.linkage.arg1 = 0;
911 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
912 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
913 /* u16! */
914 req_idx = req_offset / ioc->req_sz;
915 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
916 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
917 /* Default, will be changed if necessary in SG generation */
918 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
919#ifdef MFCNT
920 ioc->mfcnt++;
921#endif
922 }
923 else
924 mf = NULL;
925 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
926
927#ifdef MFCNT
928 if (mf == NULL)
929 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
930 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
931 ioc->req_depth);
932 mfcounter++;
933 if (mfcounter == PRINT_MF_COUNT)
934 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
935 ioc->mfcnt, ioc->req_depth);
936#endif
937
938 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
939 ioc->name, cb_idx, ioc->id, mf));
940 return mf;
941}
942
943/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
944/**
945 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
946 * @cb_idx: Handle of registered MPT protocol driver
947 * @ioc: Pointer to MPT adapter structure
948 * @mf: Pointer to MPT request frame
949 *
950 * This routine posts an MPT request frame to the request post FIFO of a
951 * specific MPT adapter.
952 */
953void
954mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
955{
956 u32 mf_dma_addr;
957 int req_offset;
958 u16 req_idx; /* Request index */
959
960 /* ensure values are reset properly! */
961 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
962 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
963 /* u16! */
964 req_idx = req_offset / ioc->req_sz;
965 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
966 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
967
968 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
969
970 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
971 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
972 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
973 ioc->RequestNB[req_idx]));
974 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
975}
976
977/**
978 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
979 * @cb_idx: Handle of registered MPT protocol driver
980 * @ioc: Pointer to MPT adapter structure
981 * @mf: Pointer to MPT request frame
982 *
983 * Send a protocol-specific MPT request frame to an IOC using
984 * hi-priority request queue.
985 *
986 * This routine posts an MPT request frame to the request post FIFO of a
987 * specific MPT adapter.
988 **/
989void
990mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
991{
992 u32 mf_dma_addr;
993 int req_offset;
994 u16 req_idx; /* Request index */
995
996 /* ensure values are reset properly! */
997 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
998 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
999 req_idx = req_offset / ioc->req_sz;
1000 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1001 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1002
1003 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1004
1005 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1006 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1007 ioc->name, mf_dma_addr, req_idx));
1008 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1009}
1010
1011/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1012/**
1013 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1014 * @ioc: Pointer to MPT adapter structure
1015 * @mf: Pointer to MPT request frame
1016 *
1017 * This routine places a MPT request frame back on the MPT adapter's
1018 * FreeQ.
1019 */
1020void
1021mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1022{
1023 unsigned long flags;
1024
1025 /* Put Request back on FreeQ! */
1026 spin_lock_irqsave(&ioc->FreeQlock, flags);
1027 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1028 goto out;
1029 /* signature to know if this mf is freed */
1030 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1031 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
1032#ifdef MFCNT
1033 ioc->mfcnt--;
1034#endif
1035 out:
1036 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1037}
1038
1039/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1040/**
1041 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1042 * @pAddr: virtual address for SGE
1043 * @flagslength: SGE flags and data transfer length
1044 * @dma_addr: Physical address
1045 *
1046 * This routine places a MPT request frame back on the MPT adapter's
1047 * FreeQ.
1048 */
1049static void
1050mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1051{
1052 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1053 pSge->FlagsLength = cpu_to_le32(flagslength);
1054 pSge->Address = cpu_to_le32(dma_addr);
1055}
1056
1057/**
1058 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1059 * @pAddr: virtual address for SGE
1060 * @flagslength: SGE flags and data transfer length
1061 * @dma_addr: Physical address
1062 *
1063 * This routine places a MPT request frame back on the MPT adapter's
1064 * FreeQ.
1065 **/
1066static void
1067mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1068{
1069 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1070 pSge->Address.Low = cpu_to_le32
1071 (lower_32_bits(dma_addr));
1072 pSge->Address.High = cpu_to_le32
1073 (upper_32_bits(dma_addr));
1074 pSge->FlagsLength = cpu_to_le32
1075 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1076}
1077
1078/**
1079 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1080 * @pAddr: virtual address for SGE
1081 * @flagslength: SGE flags and data transfer length
1082 * @dma_addr: Physical address
1083 *
1084 * This routine places a MPT request frame back on the MPT adapter's
1085 * FreeQ.
1086 **/
1087static void
1088mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1089{
1090 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1091 u32 tmp;
1092
1093 pSge->Address.Low = cpu_to_le32
1094 (lower_32_bits(dma_addr));
1095 tmp = (u32)(upper_32_bits(dma_addr));
1096
1097 /*
1098 * 1078 errata workaround for the 36GB limitation
1099 */
1100 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1101 flagslength |=
1102 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1103 tmp |= (1<<31);
1104 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1105 printk(KERN_DEBUG "1078 P0M2 addressing for "
1106 "addr = 0x%llx len = %d\n",
1107 (unsigned long long)dma_addr,
1108 MPI_SGE_LENGTH(flagslength));
1109 }
1110
1111 pSge->Address.High = cpu_to_le32(tmp);
1112 pSge->FlagsLength = cpu_to_le32(
1113 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1114}
1115
1116/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1117/**
1118 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1119 * @pAddr: virtual address for SGE
1120 * @next: nextChainOffset value (u32's)
1121 * @length: length of next SGL segment
1122 * @dma_addr: Physical address
1123 *
1124 */
1125static void
1126mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1127{
1128 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1129
1130 pChain->Length = cpu_to_le16(length);
1131 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1132 pChain->NextChainOffset = next;
1133 pChain->Address = cpu_to_le32(dma_addr);
1134}
1135
1136/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1137/**
1138 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1139 * @pAddr: virtual address for SGE
1140 * @next: nextChainOffset value (u32's)
1141 * @length: length of next SGL segment
1142 * @dma_addr: Physical address
1143 *
1144 */
1145static void
1146mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1147{
1148 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1149 u32 tmp = dma_addr & 0xFFFFFFFF;
1150
1151 pChain->Length = cpu_to_le16(length);
1152 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1153 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1154
1155 pChain->NextChainOffset = next;
1156
1157 pChain->Address.Low = cpu_to_le32(tmp);
1158 tmp = (u32)(upper_32_bits(dma_addr));
1159 pChain->Address.High = cpu_to_le32(tmp);
1160}
1161
1162/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1163/**
1164 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1165 * @cb_idx: Handle of registered MPT protocol driver
1166 * @ioc: Pointer to MPT adapter structure
1167 * @reqBytes: Size of the request in bytes
1168 * @req: Pointer to MPT request frame
1169 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1170 *
1171 * This routine is used exclusively to send MptScsiTaskMgmt
1172 * requests since they are required to be sent via doorbell handshake.
1173 *
1174 * NOTE: It is the callers responsibility to byte-swap fields in the
1175 * request which are greater than 1 byte in size.
1176 *
1177 * Returns 0 for success, non-zero for failure.
1178 */
1179int
1180mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1181{
1182 int r = 0;
1183 u8 *req_as_bytes;
1184 int ii;
1185
1186 /* State is known to be good upon entering
1187 * this function so issue the bus reset
1188 * request.
1189 */
1190
1191 /*
1192 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1193 * setting cb_idx/req_idx. But ONLY if this request
1194 * is in proper (pre-alloc'd) request buffer range...
1195 */
1196 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1197 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1198 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1199 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1200 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1201 }
1202
1203 /* Make sure there are no doorbells */
1204 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1205
1206 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1207 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1208 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1209
1210 /* Wait for IOC doorbell int */
1211 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1212 return ii;
1213 }
1214
1215 /* Read doorbell and check for active bit */
1216 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1217 return -5;
1218
1219 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1220 ioc->name, ii));
1221
1222 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1223
1224 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1225 return -2;
1226 }
1227
1228 /* Send request via doorbell handshake */
1229 req_as_bytes = (u8 *) req;
1230 for (ii = 0; ii < reqBytes/4; ii++) {
1231 u32 word;
1232
1233 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1234 (req_as_bytes[(ii*4) + 1] << 8) |
1235 (req_as_bytes[(ii*4) + 2] << 16) |
1236 (req_as_bytes[(ii*4) + 3] << 24));
1237 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1238 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1239 r = -3;
1240 break;
1241 }
1242 }
1243
1244 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1245 r = 0;
1246 else
1247 r = -4;
1248
1249 /* Make sure there are no doorbells */
1250 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1251
1252 return r;
1253}
1254
1255/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1256/**
1257 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1258 * @ioc: Pointer to MPT adapter structure
1259 * @access_control_value: define bits below
1260 * @sleepFlag: Specifies whether the process can sleep
1261 *
1262 * Provides mechanism for the host driver to control the IOC's
1263 * Host Page Buffer access.
1264 *
1265 * Access Control Value - bits[15:12]
1266 * 0h Reserved
1267 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1268 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1269 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1270 *
1271 * Returns 0 for success, non-zero for failure.
1272 */
1273
1274static int
1275mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1276{
1277 /* return if in use */
1278 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1279 & MPI_DOORBELL_ACTIVE)
1280 return -1;
1281
1282 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1283
1284 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1285 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1286 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1287 (access_control_value<<12)));
1288
1289 /* Wait for IOC to clear Doorbell Status bit */
1290 if (WaitForDoorbellAck(ioc, 5, sleepFlag) < 0)
1291 return -2;
1292 else
1293 return 0;
1294}
1295
1296/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1297/**
1298 * mpt_host_page_alloc - allocate system memory for the fw
1299 * @ioc: Pointer to pointer to IOC adapter
1300 * @ioc_init: Pointer to ioc init config page
1301 *
1302 * If we already allocated memory in past, then resend the same pointer.
1303 * Returns 0 for success, non-zero for failure.
1304 */
1305static int
1306mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1307{
1308 char *psge;
1309 int flags_length;
1310 u32 host_page_buffer_sz=0;
1311
1312 if(!ioc->HostPageBuffer) {
1313
1314 host_page_buffer_sz =
1315 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1316
1317 if(!host_page_buffer_sz)
1318 return 0; /* fw doesn't need any host buffers */
1319
1320 /* spin till we get enough memory */
1321 while (host_page_buffer_sz > 0) {
1322 ioc->HostPageBuffer =
1323 dma_alloc_coherent(&ioc->pcidev->dev,
1324 host_page_buffer_sz,
1325 &ioc->HostPageBuffer_dma,
1326 GFP_KERNEL);
1327 if (ioc->HostPageBuffer) {
1328 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1329 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1330 ioc->name, ioc->HostPageBuffer,
1331 (u32)ioc->HostPageBuffer_dma,
1332 host_page_buffer_sz));
1333 ioc->alloc_total += host_page_buffer_sz;
1334 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1335 break;
1336 }
1337
1338 host_page_buffer_sz -= (4*1024);
1339 }
1340 }
1341
1342 if(!ioc->HostPageBuffer) {
1343 printk(MYIOC_s_ERR_FMT
1344 "Failed to alloc memory for host_page_buffer!\n",
1345 ioc->name);
1346 return -999;
1347 }
1348
1349 psge = (char *)&ioc_init->HostPageBufferSGE;
1350 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1351 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1352 MPI_SGE_FLAGS_HOST_TO_IOC |
1353 MPI_SGE_FLAGS_END_OF_BUFFER;
1354 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1355 flags_length |= ioc->HostPageBuffer_sz;
1356 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1357 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1358
1359 return 0;
1360}
1361
1362/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1363/**
1364 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1365 * @iocid: IOC unique identifier (integer)
1366 * @iocpp: Pointer to pointer to IOC adapter
1367 *
1368 * Given a unique IOC identifier, set pointer to the associated MPT
1369 * adapter structure.
1370 *
1371 * Returns iocid and sets iocpp if iocid is found.
1372 * Returns -1 if iocid is not found.
1373 */
1374int
1375mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1376{
1377 MPT_ADAPTER *ioc;
1378
1379 list_for_each_entry(ioc,&ioc_list,list) {
1380 if (ioc->id == iocid) {
1381 *iocpp =ioc;
1382 return iocid;
1383 }
1384 }
1385
1386 *iocpp = NULL;
1387 return -1;
1388}
1389
1390/**
1391 * mpt_get_product_name - returns product string
1392 * @vendor: pci vendor id
1393 * @device: pci device id
1394 * @revision: pci revision id
1395 *
1396 * Returns product string displayed when driver loads,
1397 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1398 *
1399 **/
1400static const char*
1401mpt_get_product_name(u16 vendor, u16 device, u8 revision)
1402{
1403 char *product_str = NULL;
1404
1405 if (vendor == PCI_VENDOR_ID_BROCADE) {
1406 switch (device)
1407 {
1408 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1409 switch (revision)
1410 {
1411 case 0x00:
1412 product_str = "BRE040 A0";
1413 break;
1414 case 0x01:
1415 product_str = "BRE040 A1";
1416 break;
1417 default:
1418 product_str = "BRE040";
1419 break;
1420 }
1421 break;
1422 }
1423 goto out;
1424 }
1425
1426 switch (device)
1427 {
1428 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1429 product_str = "LSIFC909 B1";
1430 break;
1431 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1432 product_str = "LSIFC919 B0";
1433 break;
1434 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1435 product_str = "LSIFC929 B0";
1436 break;
1437 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1438 if (revision < 0x80)
1439 product_str = "LSIFC919X A0";
1440 else
1441 product_str = "LSIFC919XL A1";
1442 break;
1443 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1444 if (revision < 0x80)
1445 product_str = "LSIFC929X A0";
1446 else
1447 product_str = "LSIFC929XL A1";
1448 break;
1449 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1450 product_str = "LSIFC939X A1";
1451 break;
1452 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1453 product_str = "LSIFC949X A1";
1454 break;
1455 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1456 switch (revision)
1457 {
1458 case 0x00:
1459 product_str = "LSIFC949E A0";
1460 break;
1461 case 0x01:
1462 product_str = "LSIFC949E A1";
1463 break;
1464 default:
1465 product_str = "LSIFC949E";
1466 break;
1467 }
1468 break;
1469 case MPI_MANUFACTPAGE_DEVID_53C1030:
1470 switch (revision)
1471 {
1472 case 0x00:
1473 product_str = "LSI53C1030 A0";
1474 break;
1475 case 0x01:
1476 product_str = "LSI53C1030 B0";
1477 break;
1478 case 0x03:
1479 product_str = "LSI53C1030 B1";
1480 break;
1481 case 0x07:
1482 product_str = "LSI53C1030 B2";
1483 break;
1484 case 0x08:
1485 product_str = "LSI53C1030 C0";
1486 break;
1487 case 0x80:
1488 product_str = "LSI53C1030T A0";
1489 break;
1490 case 0x83:
1491 product_str = "LSI53C1030T A2";
1492 break;
1493 case 0x87:
1494 product_str = "LSI53C1030T A3";
1495 break;
1496 case 0xc1:
1497 product_str = "LSI53C1020A A1";
1498 break;
1499 default:
1500 product_str = "LSI53C1030";
1501 break;
1502 }
1503 break;
1504 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1505 switch (revision)
1506 {
1507 case 0x03:
1508 product_str = "LSI53C1035 A2";
1509 break;
1510 case 0x04:
1511 product_str = "LSI53C1035 B0";
1512 break;
1513 default:
1514 product_str = "LSI53C1035";
1515 break;
1516 }
1517 break;
1518 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1519 switch (revision)
1520 {
1521 case 0x00:
1522 product_str = "LSISAS1064 A1";
1523 break;
1524 case 0x01:
1525 product_str = "LSISAS1064 A2";
1526 break;
1527 case 0x02:
1528 product_str = "LSISAS1064 A3";
1529 break;
1530 case 0x03:
1531 product_str = "LSISAS1064 A4";
1532 break;
1533 default:
1534 product_str = "LSISAS1064";
1535 break;
1536 }
1537 break;
1538 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1539 switch (revision)
1540 {
1541 case 0x00:
1542 product_str = "LSISAS1064E A0";
1543 break;
1544 case 0x01:
1545 product_str = "LSISAS1064E B0";
1546 break;
1547 case 0x02:
1548 product_str = "LSISAS1064E B1";
1549 break;
1550 case 0x04:
1551 product_str = "LSISAS1064E B2";
1552 break;
1553 case 0x08:
1554 product_str = "LSISAS1064E B3";
1555 break;
1556 default:
1557 product_str = "LSISAS1064E";
1558 break;
1559 }
1560 break;
1561 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1562 switch (revision)
1563 {
1564 case 0x00:
1565 product_str = "LSISAS1068 A0";
1566 break;
1567 case 0x01:
1568 product_str = "LSISAS1068 B0";
1569 break;
1570 case 0x02:
1571 product_str = "LSISAS1068 B1";
1572 break;
1573 default:
1574 product_str = "LSISAS1068";
1575 break;
1576 }
1577 break;
1578 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1579 switch (revision)
1580 {
1581 case 0x00:
1582 product_str = "LSISAS1068E A0";
1583 break;
1584 case 0x01:
1585 product_str = "LSISAS1068E B0";
1586 break;
1587 case 0x02:
1588 product_str = "LSISAS1068E B1";
1589 break;
1590 case 0x04:
1591 product_str = "LSISAS1068E B2";
1592 break;
1593 case 0x08:
1594 product_str = "LSISAS1068E B3";
1595 break;
1596 default:
1597 product_str = "LSISAS1068E";
1598 break;
1599 }
1600 break;
1601 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1602 switch (revision)
1603 {
1604 case 0x00:
1605 product_str = "LSISAS1078 A0";
1606 break;
1607 case 0x01:
1608 product_str = "LSISAS1078 B0";
1609 break;
1610 case 0x02:
1611 product_str = "LSISAS1078 C0";
1612 break;
1613 case 0x03:
1614 product_str = "LSISAS1078 C1";
1615 break;
1616 case 0x04:
1617 product_str = "LSISAS1078 C2";
1618 break;
1619 default:
1620 product_str = "LSISAS1078";
1621 break;
1622 }
1623 break;
1624 }
1625
1626 out:
1627 return product_str;
1628}
1629
1630/**
1631 * mpt_mapresources - map in memory mapped io
1632 * @ioc: Pointer to pointer to IOC adapter
1633 *
1634 **/
1635static int
1636mpt_mapresources(MPT_ADAPTER *ioc)
1637{
1638 u8 __iomem *mem;
1639 int ii;
1640 resource_size_t mem_phys;
1641 unsigned long port;
1642 u32 msize;
1643 u32 psize;
1644 int r = -ENODEV;
1645 struct pci_dev *pdev;
1646
1647 pdev = ioc->pcidev;
1648 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1649 if (pci_enable_device_mem(pdev)) {
1650 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1651 "failed\n", ioc->name);
1652 return r;
1653 }
1654 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1655 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1656 "MEM failed\n", ioc->name);
1657 goto out_pci_disable_device;
1658 }
1659
1660 if (sizeof(dma_addr_t) > 4) {
1661 const uint64_t required_mask = dma_get_required_mask
1662 (&pdev->dev);
1663 if (required_mask > DMA_BIT_MASK(32)
1664 && !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))
1665 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
1666 ioc->dma_mask = DMA_BIT_MASK(64);
1667 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1668 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1669 ioc->name));
1670 } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))
1671 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
1672 ioc->dma_mask = DMA_BIT_MASK(32);
1673 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1674 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1675 ioc->name));
1676 } else {
1677 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1678 ioc->name, pci_name(pdev));
1679 goto out_pci_release_region;
1680 }
1681 } else {
1682 if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))
1683 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
1684 ioc->dma_mask = DMA_BIT_MASK(32);
1685 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1686 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1687 ioc->name));
1688 } else {
1689 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1690 ioc->name, pci_name(pdev));
1691 goto out_pci_release_region;
1692 }
1693 }
1694
1695 mem_phys = msize = 0;
1696 port = psize = 0;
1697 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1698 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1699 if (psize)
1700 continue;
1701 /* Get I/O space! */
1702 port = pci_resource_start(pdev, ii);
1703 psize = pci_resource_len(pdev, ii);
1704 } else {
1705 if (msize)
1706 continue;
1707 /* Get memmap */
1708 mem_phys = pci_resource_start(pdev, ii);
1709 msize = pci_resource_len(pdev, ii);
1710 }
1711 }
1712 ioc->mem_size = msize;
1713
1714 mem = NULL;
1715 /* Get logical ptr for PciMem0 space */
1716 /*mem = ioremap(mem_phys, msize);*/
1717 mem = ioremap(mem_phys, msize);
1718 if (mem == NULL) {
1719 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1720 " memory!\n", ioc->name);
1721 r = -EINVAL;
1722 goto out_pci_release_region;
1723 }
1724 ioc->memmap = mem;
1725 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1726 ioc->name, mem, (unsigned long long)mem_phys));
1727
1728 ioc->mem_phys = mem_phys;
1729 ioc->chip = (SYSIF_REGS __iomem *)mem;
1730
1731 /* Save Port IO values in case we need to do downloadboot */
1732 ioc->pio_mem_phys = port;
1733 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1734
1735 return 0;
1736
1737out_pci_release_region:
1738 pci_release_selected_regions(pdev, ioc->bars);
1739out_pci_disable_device:
1740 pci_disable_device(pdev);
1741 return r;
1742}
1743
1744/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1745/**
1746 * mpt_attach - Install a PCI intelligent MPT adapter.
1747 * @pdev: Pointer to pci_dev structure
1748 * @id: PCI device ID information
1749 *
1750 * This routine performs all the steps necessary to bring the IOC of
1751 * a MPT adapter to a OPERATIONAL state. This includes registering
1752 * memory regions, registering the interrupt, and allocating request
1753 * and reply memory pools.
1754 *
1755 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1756 * MPT adapter.
1757 *
1758 * Returns 0 for success, non-zero for failure.
1759 *
1760 * TODO: Add support for polled controllers
1761 */
1762int
1763mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1764{
1765 MPT_ADAPTER *ioc;
1766 u8 cb_idx;
1767 int r = -ENODEV;
1768 u8 pcixcmd;
1769 static int mpt_ids = 0;
1770#ifdef CONFIG_PROC_FS
1771 struct proc_dir_entry *dent;
1772#endif
1773
1774 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_KERNEL);
1775 if (ioc == NULL) {
1776 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1777 return -ENOMEM;
1778 }
1779
1780 ioc->id = mpt_ids++;
1781 sprintf(ioc->name, "ioc%d", ioc->id);
1782 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1783
1784 /*
1785 * set initial debug level
1786 * (refer to mptdebug.h)
1787 *
1788 */
1789 ioc->debug_level = mpt_debug_level;
1790 if (mpt_debug_level)
1791 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1792
1793 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1794
1795 ioc->pcidev = pdev;
1796 if (mpt_mapresources(ioc)) {
1797 goto out_free_ioc;
1798 }
1799
1800 /*
1801 * Setting up proper handlers for scatter gather handling
1802 */
1803 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1804 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1805 ioc->add_sge = &mpt_add_sge_64bit_1078;
1806 else
1807 ioc->add_sge = &mpt_add_sge_64bit;
1808 ioc->add_chain = &mpt_add_chain_64bit;
1809 ioc->sg_addr_size = 8;
1810 } else {
1811 ioc->add_sge = &mpt_add_sge;
1812 ioc->add_chain = &mpt_add_chain;
1813 ioc->sg_addr_size = 4;
1814 }
1815 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1816
1817 ioc->alloc_total = sizeof(MPT_ADAPTER);
1818 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1819 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1820
1821
1822 spin_lock_init(&ioc->taskmgmt_lock);
1823 mutex_init(&ioc->internal_cmds.mutex);
1824 init_completion(&ioc->internal_cmds.done);
1825 mutex_init(&ioc->mptbase_cmds.mutex);
1826 init_completion(&ioc->mptbase_cmds.done);
1827 mutex_init(&ioc->taskmgmt_cmds.mutex);
1828 init_completion(&ioc->taskmgmt_cmds.done);
1829
1830 /* Initialize the event logging.
1831 */
1832 ioc->eventTypes = 0; /* None */
1833 ioc->eventContext = 0;
1834 ioc->eventLogSize = 0;
1835 ioc->events = NULL;
1836
1837#ifdef MFCNT
1838 ioc->mfcnt = 0;
1839#endif
1840
1841 ioc->sh = NULL;
1842 ioc->cached_fw = NULL;
1843
1844 /* Initialize SCSI Config Data structure
1845 */
1846 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1847
1848 /* Initialize the fc rport list head.
1849 */
1850 INIT_LIST_HEAD(&ioc->fc_rports);
1851
1852 /* Find lookup slot. */
1853 INIT_LIST_HEAD(&ioc->list);
1854
1855
1856 /* Initialize workqueue */
1857 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1858
1859 ioc->reset_work_q =
1860 alloc_workqueue("mpt_poll_%d", WQ_MEM_RECLAIM, 0, ioc->id);
1861 if (!ioc->reset_work_q) {
1862 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1863 ioc->name);
1864 r = -ENOMEM;
1865 goto out_unmap_resources;
1866 }
1867
1868 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1869 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1870
1871 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
1872 pdev->revision);
1873
1874 switch (pdev->device)
1875 {
1876 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1877 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1878 ioc->errata_flag_1064 = 1;
1879 fallthrough;
1880 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1881 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1882 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1883 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1884 ioc->bus_type = FC;
1885 break;
1886
1887 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1888 if (pdev->revision < XL_929) {
1889 /* 929X Chip Fix. Set Split transactions level
1890 * for PCIX. Set MOST bits to zero.
1891 */
1892 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1893 pcixcmd &= 0x8F;
1894 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1895 } else {
1896 /* 929XL Chip Fix. Set MMRBC to 0x08.
1897 */
1898 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1899 pcixcmd |= 0x08;
1900 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1901 }
1902 ioc->bus_type = FC;
1903 break;
1904
1905 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1906 /* 919X Chip Fix. Set Split transactions level
1907 * for PCIX. Set MOST bits to zero.
1908 */
1909 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1910 pcixcmd &= 0x8F;
1911 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1912 ioc->bus_type = FC;
1913 break;
1914
1915 case MPI_MANUFACTPAGE_DEVID_53C1030:
1916 /* 1030 Chip Fix. Disable Split transactions
1917 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1918 */
1919 if (pdev->revision < C0_1030) {
1920 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1921 pcixcmd &= 0x8F;
1922 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1923 }
1924 fallthrough;
1925
1926 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1927 ioc->bus_type = SPI;
1928 break;
1929
1930 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1931 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1932 ioc->errata_flag_1064 = 1;
1933 ioc->bus_type = SAS;
1934 break;
1935
1936 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1937 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1938 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1939 ioc->bus_type = SAS;
1940 break;
1941 }
1942
1943
1944 switch (ioc->bus_type) {
1945
1946 case SAS:
1947 ioc->msi_enable = mpt_msi_enable_sas;
1948 break;
1949
1950 case SPI:
1951 ioc->msi_enable = mpt_msi_enable_spi;
1952 break;
1953
1954 case FC:
1955 ioc->msi_enable = mpt_msi_enable_fc;
1956 break;
1957
1958 default:
1959 ioc->msi_enable = 0;
1960 break;
1961 }
1962
1963 ioc->fw_events_off = 1;
1964
1965 if (ioc->errata_flag_1064)
1966 pci_disable_io_access(pdev);
1967
1968 spin_lock_init(&ioc->FreeQlock);
1969
1970 /* Disable all! */
1971 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1972 ioc->active = 0;
1973 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1974
1975 /* Set IOC ptr in the pcidev's driver data. */
1976 pci_set_drvdata(ioc->pcidev, ioc);
1977
1978 /* Set lookup ptr. */
1979 list_add_tail(&ioc->list, &ioc_list);
1980
1981 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1982 */
1983 mpt_detect_bound_ports(ioc, pdev);
1984
1985 INIT_LIST_HEAD(&ioc->fw_event_list);
1986 spin_lock_init(&ioc->fw_event_lock);
1987 ioc->fw_event_q = alloc_workqueue("mpt/%d", WQ_MEM_RECLAIM, 0, ioc->id);
1988 if (!ioc->fw_event_q) {
1989 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1990 ioc->name);
1991 r = -ENOMEM;
1992 goto out_remove_ioc;
1993 }
1994
1995 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
1996 CAN_SLEEP)) != 0){
1997 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
1998 ioc->name, r);
1999
2000 destroy_workqueue(ioc->fw_event_q);
2001 ioc->fw_event_q = NULL;
2002
2003 list_del(&ioc->list);
2004 if (ioc->alt_ioc)
2005 ioc->alt_ioc->alt_ioc = NULL;
2006 iounmap(ioc->memmap);
2007 if (pci_is_enabled(pdev))
2008 pci_disable_device(pdev);
2009 if (r != -5)
2010 pci_release_selected_regions(pdev, ioc->bars);
2011
2012 destroy_workqueue(ioc->reset_work_q);
2013 ioc->reset_work_q = NULL;
2014
2015 kfree(ioc);
2016 return r;
2017 }
2018
2019 /* call per device driver probe entry point */
2020 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2021 if(MptDeviceDriverHandlers[cb_idx] &&
2022 MptDeviceDriverHandlers[cb_idx]->probe) {
2023 MptDeviceDriverHandlers[cb_idx]->probe(pdev);
2024 }
2025 }
2026
2027#ifdef CONFIG_PROC_FS
2028 /*
2029 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2030 */
2031 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2032 if (dent) {
2033 proc_create_single_data("info", S_IRUGO, dent,
2034 mpt_iocinfo_proc_show, ioc);
2035 proc_create_single_data("summary", S_IRUGO, dent,
2036 mpt_summary_proc_show, ioc);
2037 }
2038#endif
2039
2040 if (!ioc->alt_ioc)
2041 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2042 msecs_to_jiffies(MPT_POLLING_INTERVAL));
2043
2044 return 0;
2045
2046out_remove_ioc:
2047 list_del(&ioc->list);
2048 if (ioc->alt_ioc)
2049 ioc->alt_ioc->alt_ioc = NULL;
2050
2051 destroy_workqueue(ioc->reset_work_q);
2052 ioc->reset_work_q = NULL;
2053
2054out_unmap_resources:
2055 iounmap(ioc->memmap);
2056 pci_disable_device(pdev);
2057 pci_release_selected_regions(pdev, ioc->bars);
2058
2059out_free_ioc:
2060 kfree(ioc);
2061
2062 return r;
2063}
2064
2065/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2066/**
2067 * mpt_detach - Remove a PCI intelligent MPT adapter.
2068 * @pdev: Pointer to pci_dev structure
2069 */
2070
2071void
2072mpt_detach(struct pci_dev *pdev)
2073{
2074 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2075 char pname[64];
2076 u8 cb_idx;
2077 unsigned long flags;
2078 struct workqueue_struct *wq;
2079
2080 /*
2081 * Stop polling ioc for fault condition
2082 */
2083 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2084 wq = ioc->reset_work_q;
2085 ioc->reset_work_q = NULL;
2086 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2087 cancel_delayed_work(&ioc->fault_reset_work);
2088 destroy_workqueue(wq);
2089
2090 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2091 wq = ioc->fw_event_q;
2092 ioc->fw_event_q = NULL;
2093 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2094 destroy_workqueue(wq);
2095
2096 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2097 remove_proc_entry(pname, NULL);
2098 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2099 remove_proc_entry(pname, NULL);
2100 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2101 remove_proc_entry(pname, NULL);
2102
2103 /* call per device driver remove entry point */
2104 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2105 if(MptDeviceDriverHandlers[cb_idx] &&
2106 MptDeviceDriverHandlers[cb_idx]->remove) {
2107 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2108 }
2109 }
2110
2111 /* Disable interrupts! */
2112 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2113
2114 ioc->active = 0;
2115 synchronize_irq(pdev->irq);
2116
2117 /* Clear any lingering interrupt */
2118 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2119
2120 CHIPREG_READ32(&ioc->chip->IntStatus);
2121
2122 mpt_adapter_dispose(ioc);
2123
2124}
2125
2126/**************************************************************************
2127 * Power Management
2128 */
2129#ifdef CONFIG_PM
2130/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2131/**
2132 * mpt_suspend - Fusion MPT base driver suspend routine.
2133 * @pdev: Pointer to pci_dev structure
2134 * @state: new state to enter
2135 */
2136int
2137mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2138{
2139 u32 device_state;
2140 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2141
2142 device_state = pci_choose_state(pdev, state);
2143 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2144 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2145 device_state);
2146
2147 /* put ioc into READY_STATE */
2148 if (SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2149 printk(MYIOC_s_ERR_FMT
2150 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2151 }
2152
2153 /* disable interrupts */
2154 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2155 ioc->active = 0;
2156
2157 /* Clear any lingering interrupt */
2158 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2159
2160 free_irq(ioc->pci_irq, ioc);
2161 if (ioc->msi_enable)
2162 pci_disable_msi(ioc->pcidev);
2163 ioc->pci_irq = -1;
2164 pci_save_state(pdev);
2165 pci_disable_device(pdev);
2166 pci_release_selected_regions(pdev, ioc->bars);
2167 pci_set_power_state(pdev, device_state);
2168 return 0;
2169}
2170
2171/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2172/**
2173 * mpt_resume - Fusion MPT base driver resume routine.
2174 * @pdev: Pointer to pci_dev structure
2175 */
2176int
2177mpt_resume(struct pci_dev *pdev)
2178{
2179 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2180 u32 device_state = pdev->current_state;
2181 int recovery_state;
2182 int err;
2183
2184 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2185 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2186 device_state);
2187
2188 pci_set_power_state(pdev, PCI_D0);
2189 pci_enable_wake(pdev, PCI_D0, 0);
2190 pci_restore_state(pdev);
2191 ioc->pcidev = pdev;
2192 err = mpt_mapresources(ioc);
2193 if (err)
2194 return err;
2195
2196 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2197 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2198 ioc->add_sge = &mpt_add_sge_64bit_1078;
2199 else
2200 ioc->add_sge = &mpt_add_sge_64bit;
2201 ioc->add_chain = &mpt_add_chain_64bit;
2202 ioc->sg_addr_size = 8;
2203 } else {
2204
2205 ioc->add_sge = &mpt_add_sge;
2206 ioc->add_chain = &mpt_add_chain;
2207 ioc->sg_addr_size = 4;
2208 }
2209 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2210
2211 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2212 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2213 CHIPREG_READ32(&ioc->chip->Doorbell));
2214
2215 /*
2216 * Errata workaround for SAS pci express:
2217 * Upon returning to the D0 state, the contents of the doorbell will be
2218 * stale data, and this will incorrectly signal to the host driver that
2219 * the firmware is ready to process mpt commands. The workaround is
2220 * to issue a diagnostic reset.
2221 */
2222 if (ioc->bus_type == SAS && (pdev->device ==
2223 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2224 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2225 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2226 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2227 ioc->name);
2228 goto out;
2229 }
2230 }
2231
2232 /* bring ioc to operational state */
2233 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2234 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2235 CAN_SLEEP);
2236 if (recovery_state != 0)
2237 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2238 "error:[%x]\n", ioc->name, recovery_state);
2239 else
2240 printk(MYIOC_s_INFO_FMT
2241 "pci-resume: success\n", ioc->name);
2242 out:
2243 return 0;
2244
2245}
2246#endif
2247
2248static int
2249mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2250{
2251 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2252 ioc->bus_type != SPI) ||
2253 (MptDriverClass[index] == MPTFC_DRIVER &&
2254 ioc->bus_type != FC) ||
2255 (MptDriverClass[index] == MPTSAS_DRIVER &&
2256 ioc->bus_type != SAS))
2257 /* make sure we only call the relevant reset handler
2258 * for the bus */
2259 return 0;
2260 return (MptResetHandlers[index])(ioc, reset_phase);
2261}
2262
2263/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2264/**
2265 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2266 * @ioc: Pointer to MPT adapter structure
2267 * @reason: Event word / reason
2268 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2269 *
2270 * This routine performs all the steps necessary to bring the IOC
2271 * to a OPERATIONAL state.
2272 *
2273 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2274 * MPT adapter.
2275 *
2276 * Returns:
2277 * 0 for success
2278 * -1 if failed to get board READY
2279 * -2 if READY but IOCFacts Failed
2280 * -3 if READY but PrimeIOCFifos Failed
2281 * -4 if READY but IOCInit Failed
2282 * -5 if failed to enable_device and/or request_selected_regions
2283 * -6 if failed to upload firmware
2284 */
2285static int
2286mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2287{
2288 int hard_reset_done = 0;
2289 int alt_ioc_ready = 0;
2290 int hard;
2291 int rc=0;
2292 int ii;
2293 int ret = 0;
2294 int reset_alt_ioc_active = 0;
2295 int irq_allocated = 0;
2296 u8 *a;
2297
2298 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2299 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2300
2301 /* Disable reply interrupts (also blocks FreeQ) */
2302 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2303 ioc->active = 0;
2304
2305 if (ioc->alt_ioc) {
2306 if (ioc->alt_ioc->active ||
2307 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2308 reset_alt_ioc_active = 1;
2309 /* Disable alt-IOC's reply interrupts
2310 * (and FreeQ) for a bit
2311 **/
2312 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2313 0xFFFFFFFF);
2314 ioc->alt_ioc->active = 0;
2315 }
2316 }
2317
2318 hard = 1;
2319 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2320 hard = 0;
2321
2322 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2323 if (hard_reset_done == -4) {
2324 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2325 ioc->name);
2326
2327 if (reset_alt_ioc_active && ioc->alt_ioc) {
2328 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2329 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2330 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2331 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2332 ioc->alt_ioc->active = 1;
2333 }
2334
2335 } else {
2336 printk(MYIOC_s_WARN_FMT
2337 "NOT READY WARNING!\n", ioc->name);
2338 }
2339 ret = -1;
2340 goto out;
2341 }
2342
2343 /* hard_reset_done = 0 if a soft reset was performed
2344 * and 1 if a hard reset was performed.
2345 */
2346 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2347 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2348 alt_ioc_ready = 1;
2349 else
2350 printk(MYIOC_s_WARN_FMT
2351 ": alt-ioc Not ready WARNING!\n",
2352 ioc->alt_ioc->name);
2353 }
2354
2355 for (ii=0; ii<5; ii++) {
2356 /* Get IOC facts! Allow 5 retries */
2357 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2358 break;
2359 }
2360
2361
2362 if (ii == 5) {
2363 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2364 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2365 ret = -2;
2366 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2367 MptDisplayIocCapabilities(ioc);
2368 }
2369
2370 if (alt_ioc_ready) {
2371 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2372 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2373 "Initial Alt IocFacts failed rc=%x\n",
2374 ioc->name, rc));
2375 /* Retry - alt IOC was initialized once
2376 */
2377 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2378 }
2379 if (rc) {
2380 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2381 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2382 alt_ioc_ready = 0;
2383 reset_alt_ioc_active = 0;
2384 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2385 MptDisplayIocCapabilities(ioc->alt_ioc);
2386 }
2387 }
2388
2389 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2390 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2391 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2392 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2393 IORESOURCE_IO);
2394 if (pci_enable_device(ioc->pcidev))
2395 return -5;
2396 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2397 "mpt"))
2398 return -5;
2399 }
2400
2401 /*
2402 * Device is reset now. It must have de-asserted the interrupt line
2403 * (if it was asserted) and it should be safe to register for the
2404 * interrupt now.
2405 */
2406 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2407 ioc->pci_irq = -1;
2408 if (ioc->pcidev->irq) {
2409 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2410 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2411 ioc->name);
2412 else
2413 ioc->msi_enable = 0;
2414 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2415 IRQF_SHARED, ioc->name, ioc);
2416 if (rc < 0) {
2417 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2418 "interrupt %d!\n",
2419 ioc->name, ioc->pcidev->irq);
2420 if (ioc->msi_enable)
2421 pci_disable_msi(ioc->pcidev);
2422 ret = -EBUSY;
2423 goto out;
2424 }
2425 irq_allocated = 1;
2426 ioc->pci_irq = ioc->pcidev->irq;
2427 pci_set_master(ioc->pcidev); /* ?? */
2428 pci_set_drvdata(ioc->pcidev, ioc);
2429 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2430 "installed at interrupt %d\n", ioc->name,
2431 ioc->pcidev->irq));
2432 }
2433 }
2434
2435 /* Prime reply & request queues!
2436 * (mucho alloc's) Must be done prior to
2437 * init as upper addresses are needed for init.
2438 * If fails, continue with alt-ioc processing
2439 */
2440 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2441 ioc->name));
2442 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2443 ret = -3;
2444
2445 /* May need to check/upload firmware & data here!
2446 * If fails, continue with alt-ioc processing
2447 */
2448 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2449 ioc->name));
2450 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2451 ret = -4;
2452// NEW!
2453 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2454 printk(MYIOC_s_WARN_FMT
2455 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2456 ioc->alt_ioc->name, rc);
2457 alt_ioc_ready = 0;
2458 reset_alt_ioc_active = 0;
2459 }
2460
2461 if (alt_ioc_ready) {
2462 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2463 alt_ioc_ready = 0;
2464 reset_alt_ioc_active = 0;
2465 printk(MYIOC_s_WARN_FMT
2466 ": alt-ioc: (%d) init failure WARNING!\n",
2467 ioc->alt_ioc->name, rc);
2468 }
2469 }
2470
2471 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2472 if (ioc->upload_fw) {
2473 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2474 "firmware upload required!\n", ioc->name));
2475
2476 /* Controller is not operational, cannot do upload
2477 */
2478 if (ret == 0) {
2479 rc = mpt_do_upload(ioc, sleepFlag);
2480 if (rc == 0) {
2481 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2482 /*
2483 * Maintain only one pointer to FW memory
2484 * so there will not be two attempt to
2485 * downloadboot onboard dual function
2486 * chips (mpt_adapter_disable,
2487 * mpt_diag_reset)
2488 */
2489 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2490 "mpt_upload: alt_%s has cached_fw=%p \n",
2491 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2492 ioc->cached_fw = NULL;
2493 }
2494 } else {
2495 printk(MYIOC_s_WARN_FMT
2496 "firmware upload failure!\n", ioc->name);
2497 ret = -6;
2498 }
2499 }
2500 }
2501 }
2502
2503 /* Enable MPT base driver management of EventNotification
2504 * and EventAck handling.
2505 */
2506 if ((ret == 0) && (!ioc->facts.EventState)) {
2507 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2508 "SendEventNotification\n",
2509 ioc->name));
2510 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2511 }
2512
2513 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2514 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2515
2516 if (ret == 0) {
2517 /* Enable! (reply interrupt) */
2518 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2519 ioc->active = 1;
2520 }
2521 if (rc == 0) { /* alt ioc */
2522 if (reset_alt_ioc_active && ioc->alt_ioc) {
2523 /* (re)Enable alt-IOC! (reply interrupt) */
2524 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2525 "reply irq re-enabled\n",
2526 ioc->alt_ioc->name));
2527 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2528 MPI_HIM_DIM);
2529 ioc->alt_ioc->active = 1;
2530 }
2531 }
2532
2533
2534 /* Add additional "reason" check before call to GetLanConfigPages
2535 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2536 * recursive scenario; GetLanConfigPages times out, timer expired
2537 * routine calls HardResetHandler, which calls into here again,
2538 * and we try GetLanConfigPages again...
2539 */
2540 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2541
2542 /*
2543 * Initialize link list for inactive raid volumes.
2544 */
2545 mutex_init(&ioc->raid_data.inactive_list_mutex);
2546 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2547
2548 switch (ioc->bus_type) {
2549
2550 case SAS:
2551 /* clear persistency table */
2552 if(ioc->facts.IOCExceptions &
2553 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2554 ret = mptbase_sas_persist_operation(ioc,
2555 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2556 if(ret != 0)
2557 goto out;
2558 }
2559
2560 /* Find IM volumes
2561 */
2562 mpt_findImVolumes(ioc);
2563
2564 /* Check, and possibly reset, the coalescing value
2565 */
2566 mpt_read_ioc_pg_1(ioc);
2567
2568 break;
2569
2570 case FC:
2571 if ((ioc->pfacts[0].ProtocolFlags &
2572 MPI_PORTFACTS_PROTOCOL_LAN) &&
2573 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2574 /*
2575 * Pre-fetch the ports LAN MAC address!
2576 * (LANPage1_t stuff)
2577 */
2578 (void) GetLanConfigPages(ioc);
2579 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2580 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2581 "LanAddr = %pMR\n", ioc->name, a));
2582 }
2583 break;
2584
2585 case SPI:
2586 /* Get NVRAM and adapter maximums from SPP 0 and 2
2587 */
2588 mpt_GetScsiPortSettings(ioc, 0);
2589
2590 /* Get version and length of SDP 1
2591 */
2592 mpt_readScsiDevicePageHeaders(ioc, 0);
2593
2594 /* Find IM volumes
2595 */
2596 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2597 mpt_findImVolumes(ioc);
2598
2599 /* Check, and possibly reset, the coalescing value
2600 */
2601 mpt_read_ioc_pg_1(ioc);
2602
2603 mpt_read_ioc_pg_4(ioc);
2604
2605 break;
2606 }
2607
2608 GetIoUnitPage2(ioc);
2609 mpt_get_manufacturing_pg_0(ioc);
2610 }
2611
2612 out:
2613 if ((ret != 0) && irq_allocated) {
2614 free_irq(ioc->pci_irq, ioc);
2615 if (ioc->msi_enable)
2616 pci_disable_msi(ioc->pcidev);
2617 }
2618 return ret;
2619}
2620
2621/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2622/**
2623 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2624 * @ioc: Pointer to MPT adapter structure
2625 * @pdev: Pointer to (struct pci_dev) structure
2626 *
2627 * Search for PCI bus/dev_function which matches
2628 * PCI bus/dev_function (+/-1) for newly discovered 929,
2629 * 929X, 1030 or 1035.
2630 *
2631 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2632 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2633 */
2634static void
2635mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2636{
2637 struct pci_dev *peer=NULL;
2638 unsigned int slot = PCI_SLOT(pdev->devfn);
2639 unsigned int func = PCI_FUNC(pdev->devfn);
2640 MPT_ADAPTER *ioc_srch;
2641
2642 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2643 " searching for devfn match on %x or %x\n",
2644 ioc->name, pci_name(pdev), pdev->bus->number,
2645 pdev->devfn, func-1, func+1));
2646
2647 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2648 if (!peer) {
2649 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2650 if (!peer)
2651 return;
2652 }
2653
2654 list_for_each_entry(ioc_srch, &ioc_list, list) {
2655 struct pci_dev *_pcidev = ioc_srch->pcidev;
2656 if (_pcidev == peer) {
2657 /* Paranoia checks */
2658 if (ioc->alt_ioc != NULL) {
2659 printk(MYIOC_s_WARN_FMT
2660 "Oops, already bound (%s <==> %s)!\n",
2661 ioc->name, ioc->name, ioc->alt_ioc->name);
2662 break;
2663 } else if (ioc_srch->alt_ioc != NULL) {
2664 printk(MYIOC_s_WARN_FMT
2665 "Oops, already bound (%s <==> %s)!\n",
2666 ioc_srch->name, ioc_srch->name,
2667 ioc_srch->alt_ioc->name);
2668 break;
2669 }
2670 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2671 "FOUND! binding %s <==> %s\n",
2672 ioc->name, ioc->name, ioc_srch->name));
2673 ioc_srch->alt_ioc = ioc;
2674 ioc->alt_ioc = ioc_srch;
2675 }
2676 }
2677 pci_dev_put(peer);
2678}
2679
2680/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2681/**
2682 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2683 * @ioc: Pointer to MPT adapter structure
2684 */
2685static void
2686mpt_adapter_disable(MPT_ADAPTER *ioc)
2687{
2688 int sz;
2689 int ret;
2690
2691 if (ioc->cached_fw != NULL) {
2692 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2693 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2694 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2695 ioc->cached_fw, CAN_SLEEP)) < 0) {
2696 printk(MYIOC_s_WARN_FMT
2697 ": firmware downloadboot failure (%d)!\n",
2698 ioc->name, ret);
2699 }
2700 }
2701
2702 /*
2703 * Put the controller into ready state (if its not already)
2704 */
2705 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2706 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2707 CAN_SLEEP)) {
2708 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2709 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2710 "reset failed to put ioc in ready state!\n",
2711 ioc->name, __func__);
2712 } else
2713 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2714 "failed!\n", ioc->name, __func__);
2715 }
2716
2717
2718 /* Disable adapter interrupts! */
2719 synchronize_irq(ioc->pcidev->irq);
2720 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2721 ioc->active = 0;
2722
2723 /* Clear any lingering interrupt */
2724 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2725 CHIPREG_READ32(&ioc->chip->IntStatus);
2726
2727 if (ioc->alloc != NULL) {
2728 sz = ioc->alloc_sz;
2729 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2730 ioc->name, ioc->alloc, ioc->alloc_sz));
2731 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc,
2732 ioc->alloc_dma);
2733 ioc->reply_frames = NULL;
2734 ioc->req_frames = NULL;
2735 ioc->alloc = NULL;
2736 ioc->alloc_total -= sz;
2737 }
2738
2739 if (ioc->sense_buf_pool != NULL) {
2740 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2741 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool,
2742 ioc->sense_buf_pool_dma);
2743 ioc->sense_buf_pool = NULL;
2744 ioc->alloc_total -= sz;
2745 }
2746
2747 if (ioc->events != NULL){
2748 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2749 kfree(ioc->events);
2750 ioc->events = NULL;
2751 ioc->alloc_total -= sz;
2752 }
2753
2754 mpt_free_fw_memory(ioc);
2755
2756 kfree(ioc->spi_data.nvram);
2757 mpt_inactive_raid_list_free(ioc);
2758 kfree(ioc->raid_data.pIocPg2);
2759 kfree(ioc->raid_data.pIocPg3);
2760 ioc->spi_data.nvram = NULL;
2761 ioc->raid_data.pIocPg3 = NULL;
2762
2763 if (ioc->spi_data.pIocPg4 != NULL) {
2764 sz = ioc->spi_data.IocPg4Sz;
2765 dma_free_coherent(&ioc->pcidev->dev, sz,
2766 ioc->spi_data.pIocPg4,
2767 ioc->spi_data.IocPg4_dma);
2768 ioc->spi_data.pIocPg4 = NULL;
2769 ioc->alloc_total -= sz;
2770 }
2771
2772 if (ioc->ReqToChain != NULL) {
2773 kfree(ioc->ReqToChain);
2774 kfree(ioc->RequestNB);
2775 ioc->ReqToChain = NULL;
2776 }
2777
2778 kfree(ioc->ChainToChain);
2779 ioc->ChainToChain = NULL;
2780
2781 if (ioc->HostPageBuffer != NULL) {
2782 if((ret = mpt_host_page_access_control(ioc,
2783 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2784 printk(MYIOC_s_ERR_FMT
2785 ": %s: host page buffers free failed (%d)!\n",
2786 ioc->name, __func__, ret);
2787 }
2788 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2789 "HostPageBuffer free @ %p, sz=%d bytes\n",
2790 ioc->name, ioc->HostPageBuffer,
2791 ioc->HostPageBuffer_sz));
2792 dma_free_coherent(&ioc->pcidev->dev, ioc->HostPageBuffer_sz,
2793 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2794 ioc->HostPageBuffer = NULL;
2795 ioc->HostPageBuffer_sz = 0;
2796 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2797 }
2798
2799 pci_set_drvdata(ioc->pcidev, NULL);
2800}
2801/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2802/**
2803 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2804 * @ioc: Pointer to MPT adapter structure
2805 *
2806 * This routine unregisters h/w resources and frees all alloc'd memory
2807 * associated with a MPT adapter structure.
2808 */
2809static void
2810mpt_adapter_dispose(MPT_ADAPTER *ioc)
2811{
2812 int sz_first, sz_last;
2813
2814 if (ioc == NULL)
2815 return;
2816
2817 sz_first = ioc->alloc_total;
2818
2819 mpt_adapter_disable(ioc);
2820
2821 if (ioc->pci_irq != -1) {
2822 free_irq(ioc->pci_irq, ioc);
2823 if (ioc->msi_enable)
2824 pci_disable_msi(ioc->pcidev);
2825 ioc->pci_irq = -1;
2826 }
2827
2828 if (ioc->memmap != NULL) {
2829 iounmap(ioc->memmap);
2830 ioc->memmap = NULL;
2831 }
2832
2833 pci_disable_device(ioc->pcidev);
2834 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2835
2836 /* Zap the adapter lookup ptr! */
2837 list_del(&ioc->list);
2838
2839 sz_last = ioc->alloc_total;
2840 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2841 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2842
2843 if (ioc->alt_ioc)
2844 ioc->alt_ioc->alt_ioc = NULL;
2845
2846 kfree(ioc);
2847}
2848
2849/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2850/**
2851 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2852 * @ioc: Pointer to MPT adapter structure
2853 */
2854static void
2855MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2856{
2857 int i = 0;
2858
2859 printk(KERN_INFO "%s: ", ioc->name);
2860 if (ioc->prod_name)
2861 pr_cont("%s: ", ioc->prod_name);
2862 pr_cont("Capabilities={");
2863
2864 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2865 pr_cont("Initiator");
2866 i++;
2867 }
2868
2869 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2870 pr_cont("%sTarget", i ? "," : "");
2871 i++;
2872 }
2873
2874 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2875 pr_cont("%sLAN", i ? "," : "");
2876 i++;
2877 }
2878
2879#if 0
2880 /*
2881 * This would probably evoke more questions than it's worth
2882 */
2883 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2884 pr_cont("%sLogBusAddr", i ? "," : "");
2885 i++;
2886 }
2887#endif
2888
2889 pr_cont("}\n");
2890}
2891
2892/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2893/**
2894 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2895 * @ioc: Pointer to MPT_ADAPTER structure
2896 * @force: Force hard KickStart of IOC
2897 * @sleepFlag: Specifies whether the process can sleep
2898 *
2899 * Returns:
2900 * 1 - DIAG reset and READY
2901 * 0 - READY initially OR soft reset and READY
2902 * -1 - Any failure on KickStart
2903 * -2 - Msg Unit Reset Failed
2904 * -3 - IO Unit Reset Failed
2905 * -4 - IOC owned by a PEER
2906 */
2907static int
2908MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2909{
2910 u32 ioc_state;
2911 int statefault = 0;
2912 int cntdn;
2913 int hard_reset_done = 0;
2914 int r;
2915 int ii;
2916 int whoinit;
2917
2918 /* Get current [raw] IOC state */
2919 ioc_state = mpt_GetIocState(ioc, 0);
2920 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2921
2922 /*
2923 * Check to see if IOC got left/stuck in doorbell handshake
2924 * grip of death. If so, hard reset the IOC.
2925 */
2926 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2927 statefault = 1;
2928 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2929 ioc->name);
2930 }
2931
2932 /* Is it already READY? */
2933 if (!statefault &&
2934 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2935 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2936 "IOC is in READY state\n", ioc->name));
2937 return 0;
2938 }
2939
2940 /*
2941 * Check to see if IOC is in FAULT state.
2942 */
2943 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2944 statefault = 2;
2945 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2946 ioc->name);
2947 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2948 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2949 }
2950
2951 /*
2952 * Hmmm... Did it get left operational?
2953 */
2954 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2955 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2956 ioc->name));
2957
2958 /* Check WhoInit.
2959 * If PCI Peer, exit.
2960 * Else, if no fault conditions are present, issue a MessageUnitReset
2961 * Else, fall through to KickStart case
2962 */
2963 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2964 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2965 "whoinit 0x%x statefault %d force %d\n",
2966 ioc->name, whoinit, statefault, force));
2967 if (whoinit == MPI_WHOINIT_PCI_PEER)
2968 return -4;
2969 else {
2970 if ((statefault == 0 ) && (force == 0)) {
2971 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2972 return 0;
2973 }
2974 statefault = 3;
2975 }
2976 }
2977
2978 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2979 if (hard_reset_done < 0)
2980 return -1;
2981
2982 /*
2983 * Loop here waiting for IOC to come READY.
2984 */
2985 ii = 0;
2986 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
2987
2988 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
2989 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
2990 /*
2991 * BIOS or previous driver load left IOC in OP state.
2992 * Reset messaging FIFOs.
2993 */
2994 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
2995 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
2996 return -2;
2997 }
2998 } else if (ioc_state == MPI_IOC_STATE_RESET) {
2999 /*
3000 * Something is wrong. Try to get IOC back
3001 * to a known state.
3002 */
3003 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3004 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3005 return -3;
3006 }
3007 }
3008
3009 ii++; cntdn--;
3010 if (!cntdn) {
3011 printk(MYIOC_s_ERR_FMT
3012 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3013 ioc->name, ioc_state, (int)((ii+5)/HZ));
3014 return -ETIME;
3015 }
3016
3017 if (sleepFlag == CAN_SLEEP) {
3018 msleep(1);
3019 } else {
3020 mdelay (1); /* 1 msec delay */
3021 }
3022
3023 }
3024
3025 if (statefault < 3) {
3026 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3027 statefault == 1 ? "stuck handshake" : "IOC FAULT");
3028 }
3029
3030 return hard_reset_done;
3031}
3032
3033/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3034/**
3035 * mpt_GetIocState - Get the current state of a MPT adapter.
3036 * @ioc: Pointer to MPT_ADAPTER structure
3037 * @cooked: Request raw or cooked IOC state
3038 *
3039 * Returns all IOC Doorbell register bits if cooked==0, else just the
3040 * Doorbell bits in MPI_IOC_STATE_MASK.
3041 */
3042u32
3043mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3044{
3045 u32 s, sc;
3046
3047 /* Get! */
3048 s = CHIPREG_READ32(&ioc->chip->Doorbell);
3049 sc = s & MPI_IOC_STATE_MASK;
3050
3051 /* Save! */
3052 ioc->last_state = sc;
3053
3054 return cooked ? sc : s;
3055}
3056
3057/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3058/**
3059 * GetIocFacts - Send IOCFacts request to MPT adapter.
3060 * @ioc: Pointer to MPT_ADAPTER structure
3061 * @sleepFlag: Specifies whether the process can sleep
3062 * @reason: If recovery, only update facts.
3063 *
3064 * Returns 0 for success, non-zero for failure.
3065 */
3066static int
3067GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3068{
3069 IOCFacts_t get_facts;
3070 IOCFactsReply_t *facts;
3071 int r;
3072 int req_sz;
3073 int reply_sz;
3074 int sz;
3075 u32 vv;
3076 u8 shiftFactor=1;
3077
3078 /* IOC *must* NOT be in RESET state! */
3079 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3080 printk(KERN_ERR MYNAM
3081 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3082 ioc->name, ioc->last_state);
3083 return -44;
3084 }
3085
3086 facts = &ioc->facts;
3087
3088 /* Destination (reply area)... */
3089 reply_sz = sizeof(*facts);
3090 memset(facts, 0, reply_sz);
3091
3092 /* Request area (get_facts on the stack right now!) */
3093 req_sz = sizeof(get_facts);
3094 memset(&get_facts, 0, req_sz);
3095
3096 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3097 /* Assert: All other get_facts fields are zero! */
3098
3099 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3100 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3101 ioc->name, req_sz, reply_sz));
3102
3103 /* No non-zero fields in the get_facts request are greater than
3104 * 1 byte in size, so we can just fire it off as is.
3105 */
3106 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3107 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3108 if (r != 0)
3109 return r;
3110
3111 /*
3112 * Now byte swap (GRRR) the necessary fields before any further
3113 * inspection of reply contents.
3114 *
3115 * But need to do some sanity checks on MsgLength (byte) field
3116 * to make sure we don't zero IOC's req_sz!
3117 */
3118 /* Did we get a valid reply? */
3119 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3120 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3121 /*
3122 * If not been here, done that, save off first WhoInit value
3123 */
3124 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3125 ioc->FirstWhoInit = facts->WhoInit;
3126 }
3127
3128 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3129 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3130 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3131 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3132 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3133 /* CHECKME! IOCStatus, IOCLogInfo */
3134
3135 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3136 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3137
3138 /*
3139 * FC f/w version changed between 1.1 and 1.2
3140 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3141 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3142 */
3143 if (facts->MsgVersion < MPI_VERSION_01_02) {
3144 /*
3145 * Handle old FC f/w style, convert to new...
3146 */
3147 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3148 facts->FWVersion.Word =
3149 ((oldv<<12) & 0xFF000000) |
3150 ((oldv<<8) & 0x000FFF00);
3151 } else
3152 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3153
3154 facts->ProductID = le16_to_cpu(facts->ProductID);
3155
3156 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3157 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3158 ioc->ir_firmware = 1;
3159
3160 facts->CurrentHostMfaHighAddr =
3161 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3162 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3163 facts->CurrentSenseBufferHighAddr =
3164 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3165 facts->CurReplyFrameSize =
3166 le16_to_cpu(facts->CurReplyFrameSize);
3167 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3168
3169 /*
3170 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3171 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3172 * to 14 in MPI-1.01.0x.
3173 */
3174 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3175 facts->MsgVersion > MPI_VERSION_01_00) {
3176 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3177 }
3178
3179 facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
3180
3181 if (!facts->RequestFrameSize) {
3182 /* Something is wrong! */
3183 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3184 ioc->name);
3185 return -55;
3186 }
3187
3188 r = sz = facts->BlockSize;
3189 vv = ((63 / (sz * 4)) + 1) & 0x03;
3190 ioc->NB_for_64_byte_frame = vv;
3191 while ( sz )
3192 {
3193 shiftFactor++;
3194 sz = sz >> 1;
3195 }
3196 ioc->NBShiftFactor = shiftFactor;
3197 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3198 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3199 ioc->name, vv, shiftFactor, r));
3200
3201 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3202 /*
3203 * Set values for this IOC's request & reply frame sizes,
3204 * and request & reply queue depths...
3205 */
3206 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3207 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3208 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3209 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3210
3211 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3212 ioc->name, ioc->reply_sz, ioc->reply_depth));
3213 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3214 ioc->name, ioc->req_sz, ioc->req_depth));
3215
3216 /* Get port facts! */
3217 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3218 return r;
3219 }
3220 } else {
3221 printk(MYIOC_s_ERR_FMT
3222 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3223 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3224 RequestFrameSize)/sizeof(u32)));
3225 return -66;
3226 }
3227
3228 return 0;
3229}
3230
3231/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3232/**
3233 * GetPortFacts - Send PortFacts request to MPT adapter.
3234 * @ioc: Pointer to MPT_ADAPTER structure
3235 * @portnum: Port number
3236 * @sleepFlag: Specifies whether the process can sleep
3237 *
3238 * Returns 0 for success, non-zero for failure.
3239 */
3240static int
3241GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3242{
3243 PortFacts_t get_pfacts;
3244 PortFactsReply_t *pfacts;
3245 int ii;
3246 int req_sz;
3247 int reply_sz;
3248 int max_id;
3249
3250 /* IOC *must* NOT be in RESET state! */
3251 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3252 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3253 ioc->name, ioc->last_state );
3254 return -4;
3255 }
3256
3257 pfacts = &ioc->pfacts[portnum];
3258
3259 /* Destination (reply area)... */
3260 reply_sz = sizeof(*pfacts);
3261 memset(pfacts, 0, reply_sz);
3262
3263 /* Request area (get_pfacts on the stack right now!) */
3264 req_sz = sizeof(get_pfacts);
3265 memset(&get_pfacts, 0, req_sz);
3266
3267 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3268 get_pfacts.PortNumber = portnum;
3269 /* Assert: All other get_pfacts fields are zero! */
3270
3271 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3272 ioc->name, portnum));
3273
3274 /* No non-zero fields in the get_pfacts request are greater than
3275 * 1 byte in size, so we can just fire it off as is.
3276 */
3277 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3278 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3279 if (ii != 0)
3280 return ii;
3281
3282 /* Did we get a valid reply? */
3283
3284 /* Now byte swap the necessary fields in the response. */
3285 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3286 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3287 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3288 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3289 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3290 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3291 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3292 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3293 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3294
3295 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3296 pfacts->MaxDevices;
3297 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3298 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3299
3300 /*
3301 * Place all the devices on channels
3302 *
3303 * (for debuging)
3304 */
3305 if (mpt_channel_mapping) {
3306 ioc->devices_per_bus = 1;
3307 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3308 }
3309
3310 return 0;
3311}
3312
3313/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3314/**
3315 * SendIocInit - Send IOCInit request to MPT adapter.
3316 * @ioc: Pointer to MPT_ADAPTER structure
3317 * @sleepFlag: Specifies whether the process can sleep
3318 *
3319 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3320 *
3321 * Returns 0 for success, non-zero for failure.
3322 */
3323static int
3324SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3325{
3326 IOCInit_t ioc_init;
3327 MPIDefaultReply_t init_reply;
3328 u32 state;
3329 int r;
3330 int count;
3331 int cntdn;
3332
3333 memset(&ioc_init, 0, sizeof(ioc_init));
3334 memset(&init_reply, 0, sizeof(init_reply));
3335
3336 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3337 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3338
3339 /* If we are in a recovery mode and we uploaded the FW image,
3340 * then this pointer is not NULL. Skip the upload a second time.
3341 * Set this flag if cached_fw set for either IOC.
3342 */
3343 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3344 ioc->upload_fw = 1;
3345 else
3346 ioc->upload_fw = 0;
3347 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3348 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3349
3350 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3351 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3352
3353 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3354 ioc->name, ioc->facts.MsgVersion));
3355 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3356 // set MsgVersion and HeaderVersion host driver was built with
3357 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3358 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3359
3360 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3361 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3362 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3363 return -99;
3364 }
3365 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3366
3367 if (ioc->sg_addr_size == sizeof(u64)) {
3368 /* Save the upper 32-bits of the request
3369 * (reply) and sense buffers.
3370 */
3371 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3372 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3373 } else {
3374 /* Force 32-bit addressing */
3375 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3376 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3377 }
3378
3379 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3380 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3381 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3382 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3383
3384 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3385 ioc->name, &ioc_init));
3386
3387 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3388 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3389 if (r != 0) {
3390 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3391 return r;
3392 }
3393
3394 /* No need to byte swap the multibyte fields in the reply
3395 * since we don't even look at its contents.
3396 */
3397
3398 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3399 ioc->name, &ioc_init));
3400
3401 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3402 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3403 return r;
3404 }
3405
3406 /* YIKES! SUPER IMPORTANT!!!
3407 * Poll IocState until _OPERATIONAL while IOC is doing
3408 * LoopInit and TargetDiscovery!
3409 */
3410 count = 0;
3411 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3412 state = mpt_GetIocState(ioc, 1);
3413 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3414 if (sleepFlag == CAN_SLEEP) {
3415 msleep(1);
3416 } else {
3417 mdelay(1);
3418 }
3419
3420 if (!cntdn) {
3421 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3422 ioc->name, (int)((count+5)/HZ));
3423 return -9;
3424 }
3425
3426 state = mpt_GetIocState(ioc, 1);
3427 count++;
3428 }
3429 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3430 ioc->name, count));
3431
3432 ioc->aen_event_read_flag=0;
3433 return r;
3434}
3435
3436/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3437/**
3438 * SendPortEnable - Send PortEnable request to MPT adapter port.
3439 * @ioc: Pointer to MPT_ADAPTER structure
3440 * @portnum: Port number to enable
3441 * @sleepFlag: Specifies whether the process can sleep
3442 *
3443 * Send PortEnable to bring IOC to OPERATIONAL state.
3444 *
3445 * Returns 0 for success, non-zero for failure.
3446 */
3447static int
3448SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3449{
3450 PortEnable_t port_enable;
3451 MPIDefaultReply_t reply_buf;
3452 int rc;
3453 int req_sz;
3454 int reply_sz;
3455
3456 /* Destination... */
3457 reply_sz = sizeof(MPIDefaultReply_t);
3458 memset(&reply_buf, 0, reply_sz);
3459
3460 req_sz = sizeof(PortEnable_t);
3461 memset(&port_enable, 0, req_sz);
3462
3463 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3464 port_enable.PortNumber = portnum;
3465/* port_enable.ChainOffset = 0; */
3466/* port_enable.MsgFlags = 0; */
3467/* port_enable.MsgContext = 0; */
3468
3469 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3470 ioc->name, portnum, &port_enable));
3471
3472 /* RAID FW may take a long time to enable
3473 */
3474 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3475 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3476 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3477 300 /*seconds*/, sleepFlag);
3478 } else {
3479 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3480 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3481 30 /*seconds*/, sleepFlag);
3482 }
3483 return rc;
3484}
3485
3486/**
3487 * mpt_alloc_fw_memory - allocate firmware memory
3488 * @ioc: Pointer to MPT_ADAPTER structure
3489 * @size: total FW bytes
3490 *
3491 * If memory has already been allocated, the same (cached) value
3492 * is returned.
3493 *
3494 * Return 0 if successful, or non-zero for failure
3495 **/
3496int
3497mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3498{
3499 int rc;
3500
3501 if (ioc->cached_fw) {
3502 rc = 0; /* use already allocated memory */
3503 goto out;
3504 }
3505 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3506 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3507 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3508 rc = 0;
3509 goto out;
3510 }
3511 ioc->cached_fw = dma_alloc_coherent(&ioc->pcidev->dev, size,
3512 &ioc->cached_fw_dma, GFP_ATOMIC);
3513 if (!ioc->cached_fw) {
3514 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3515 ioc->name);
3516 rc = -1;
3517 } else {
3518 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3519 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3520 ioc->alloc_total += size;
3521 rc = 0;
3522 }
3523 out:
3524 return rc;
3525}
3526
3527/**
3528 * mpt_free_fw_memory - free firmware memory
3529 * @ioc: Pointer to MPT_ADAPTER structure
3530 *
3531 * If alt_img is NULL, delete from ioc structure.
3532 * Else, delete a secondary image in same format.
3533 **/
3534void
3535mpt_free_fw_memory(MPT_ADAPTER *ioc)
3536{
3537 int sz;
3538
3539 if (!ioc->cached_fw)
3540 return;
3541
3542 sz = ioc->facts.FWImageSize;
3543 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3544 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3545 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->cached_fw,
3546 ioc->cached_fw_dma);
3547 ioc->alloc_total -= sz;
3548 ioc->cached_fw = NULL;
3549}
3550
3551/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3552/**
3553 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3554 * @ioc: Pointer to MPT_ADAPTER structure
3555 * @sleepFlag: Specifies whether the process can sleep
3556 *
3557 * Returns 0 for success, >0 for handshake failure
3558 * <0 for fw upload failure.
3559 *
3560 * Remark: If bound IOC and a successful FWUpload was performed
3561 * on the bound IOC, the second image is discarded
3562 * and memory is free'd. Both channels must upload to prevent
3563 * IOC from running in degraded mode.
3564 */
3565static int
3566mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3567{
3568 u8 reply[sizeof(FWUploadReply_t)];
3569 FWUpload_t *prequest;
3570 FWUploadReply_t *preply;
3571 FWUploadTCSGE_t *ptcsge;
3572 u32 flagsLength;
3573 int ii, sz, reply_sz;
3574 int cmdStatus;
3575 int request_size;
3576 /* If the image size is 0, we are done.
3577 */
3578 if ((sz = ioc->facts.FWImageSize) == 0)
3579 return 0;
3580
3581 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3582 return -ENOMEM;
3583
3584 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3585 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3586
3587 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3588 kzalloc(ioc->req_sz, GFP_KERNEL);
3589 if (!prequest) {
3590 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3591 "while allocating memory \n", ioc->name));
3592 mpt_free_fw_memory(ioc);
3593 return -ENOMEM;
3594 }
3595
3596 preply = (FWUploadReply_t *)&reply;
3597
3598 reply_sz = sizeof(reply);
3599 memset(preply, 0, reply_sz);
3600
3601 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3602 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3603
3604 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3605 ptcsge->DetailsLength = 12;
3606 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3607 ptcsge->ImageSize = cpu_to_le32(sz);
3608 ptcsge++;
3609
3610 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3611 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3612 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3613 ioc->SGE_size;
3614 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3615 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3616 ioc->facts.FWImageSize, request_size));
3617 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3618
3619 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3620 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3621
3622 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3623 "rc=%x \n", ioc->name, ii));
3624
3625 cmdStatus = -EFAULT;
3626 if (ii == 0) {
3627 /* Handshake transfer was complete and successful.
3628 * Check the Reply Frame.
3629 */
3630 int status;
3631 status = le16_to_cpu(preply->IOCStatus) &
3632 MPI_IOCSTATUS_MASK;
3633 if (status == MPI_IOCSTATUS_SUCCESS &&
3634 ioc->facts.FWImageSize ==
3635 le32_to_cpu(preply->ActualImageSize))
3636 cmdStatus = 0;
3637 }
3638 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3639 ioc->name, cmdStatus));
3640
3641
3642 if (cmdStatus) {
3643 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3644 "freeing image \n", ioc->name));
3645 mpt_free_fw_memory(ioc);
3646 }
3647 kfree(prequest);
3648
3649 return cmdStatus;
3650}
3651
3652/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3653/**
3654 * mpt_downloadboot - DownloadBoot code
3655 * @ioc: Pointer to MPT_ADAPTER structure
3656 * @pFwHeader: Pointer to firmware header info
3657 * @sleepFlag: Specifies whether the process can sleep
3658 *
3659 * FwDownloadBoot requires Programmed IO access.
3660 *
3661 * Returns 0 for success
3662 * -1 FW Image size is 0
3663 * -2 No valid cached_fw Pointer
3664 * <0 for fw upload failure.
3665 */
3666static int
3667mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3668{
3669 MpiExtImageHeader_t *pExtImage;
3670 u32 fwSize;
3671 u32 diag0val;
3672 int count;
3673 u32 *ptrFw;
3674 u32 diagRwData;
3675 u32 nextImage;
3676 u32 load_addr;
3677 u32 ioc_state=0;
3678
3679 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3680 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3681
3682 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3683 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3684 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3685 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3686 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3687 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3688
3689 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3690
3691 /* wait 1 msec */
3692 if (sleepFlag == CAN_SLEEP) {
3693 msleep(1);
3694 } else {
3695 mdelay (1);
3696 }
3697
3698 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3699 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3700
3701 for (count = 0; count < 30; count ++) {
3702 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3703 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3704 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3705 ioc->name, count));
3706 break;
3707 }
3708 /* wait .1 sec */
3709 if (sleepFlag == CAN_SLEEP) {
3710 msleep (100);
3711 } else {
3712 mdelay (100);
3713 }
3714 }
3715
3716 if ( count == 30 ) {
3717 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3718 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3719 ioc->name, diag0val));
3720 return -3;
3721 }
3722
3723 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3724 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3725 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3726 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3727 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3728 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3729
3730 /* Set the DiagRwEn and Disable ARM bits */
3731 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3732
3733 fwSize = (pFwHeader->ImageSize + 3)/4;
3734 ptrFw = (u32 *) pFwHeader;
3735
3736 /* Write the LoadStartAddress to the DiagRw Address Register
3737 * using Programmed IO
3738 */
3739 if (ioc->errata_flag_1064)
3740 pci_enable_io_access(ioc->pcidev);
3741
3742 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3743 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3744 ioc->name, pFwHeader->LoadStartAddress));
3745
3746 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3747 ioc->name, fwSize*4, ptrFw));
3748 while (fwSize--) {
3749 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3750 }
3751
3752 nextImage = pFwHeader->NextImageHeaderOffset;
3753 while (nextImage) {
3754 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3755
3756 load_addr = pExtImage->LoadStartAddress;
3757
3758 fwSize = (pExtImage->ImageSize + 3) >> 2;
3759 ptrFw = (u32 *)pExtImage;
3760
3761 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3762 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3763 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3764
3765 while (fwSize--) {
3766 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3767 }
3768 nextImage = pExtImage->NextImageHeaderOffset;
3769 }
3770
3771 /* Write the IopResetVectorRegAddr */
3772 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3773 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3774
3775 /* Write the IopResetVectorValue */
3776 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3777 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3778
3779 /* Clear the internal flash bad bit - autoincrementing register,
3780 * so must do two writes.
3781 */
3782 if (ioc->bus_type == SPI) {
3783 /*
3784 * 1030 and 1035 H/W errata, workaround to access
3785 * the ClearFlashBadSignatureBit
3786 */
3787 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3788 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3789 diagRwData |= 0x40000000;
3790 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3791 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3792
3793 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3794 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3795 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3796 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3797
3798 /* wait 1 msec */
3799 if (sleepFlag == CAN_SLEEP) {
3800 msleep (1);
3801 } else {
3802 mdelay (1);
3803 }
3804 }
3805
3806 if (ioc->errata_flag_1064)
3807 pci_disable_io_access(ioc->pcidev);
3808
3809 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3810 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3811 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3812 ioc->name, diag0val));
3813 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3814 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3815 ioc->name, diag0val));
3816 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3817
3818 /* Write 0xFF to reset the sequencer */
3819 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3820
3821 if (ioc->bus_type == SAS) {
3822 ioc_state = mpt_GetIocState(ioc, 0);
3823 if ( (GetIocFacts(ioc, sleepFlag,
3824 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3825 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3826 ioc->name, ioc_state));
3827 return -EFAULT;
3828 }
3829 }
3830
3831 for (count=0; count<HZ*20; count++) {
3832 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3833 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3834 "downloadboot successful! (count=%d) IocState=%x\n",
3835 ioc->name, count, ioc_state));
3836 if (ioc->bus_type == SAS) {
3837 return 0;
3838 }
3839 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3840 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3841 "downloadboot: SendIocInit failed\n",
3842 ioc->name));
3843 return -EFAULT;
3844 }
3845 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3846 "downloadboot: SendIocInit successful\n",
3847 ioc->name));
3848 return 0;
3849 }
3850 if (sleepFlag == CAN_SLEEP) {
3851 msleep (10);
3852 } else {
3853 mdelay (10);
3854 }
3855 }
3856 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3857 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3858 return -EFAULT;
3859}
3860
3861/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3862/**
3863 * KickStart - Perform hard reset of MPT adapter.
3864 * @ioc: Pointer to MPT_ADAPTER structure
3865 * @force: Force hard reset
3866 * @sleepFlag: Specifies whether the process can sleep
3867 *
3868 * This routine places MPT adapter in diagnostic mode via the
3869 * WriteSequence register, and then performs a hard reset of adapter
3870 * via the Diagnostic register.
3871 *
3872 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3873 * or NO_SLEEP (interrupt thread, use mdelay)
3874 * force - 1 if doorbell active, board fault state
3875 * board operational, IOC_RECOVERY or
3876 * IOC_BRINGUP and there is an alt_ioc.
3877 * 0 else
3878 *
3879 * Returns:
3880 * 1 - hard reset, READY
3881 * 0 - no reset due to History bit, READY
3882 * -1 - no reset due to History bit but not READY
3883 * OR reset but failed to come READY
3884 * -2 - no reset, could not enter DIAG mode
3885 * -3 - reset but bad FW bit
3886 */
3887static int
3888KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3889{
3890 int hard_reset_done = 0;
3891 u32 ioc_state=0;
3892 int cnt,cntdn;
3893
3894 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3895 if (ioc->bus_type == SPI) {
3896 /* Always issue a Msg Unit Reset first. This will clear some
3897 * SCSI bus hang conditions.
3898 */
3899 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3900
3901 if (sleepFlag == CAN_SLEEP) {
3902 msleep (1000);
3903 } else {
3904 mdelay (1000);
3905 }
3906 }
3907
3908 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3909 if (hard_reset_done < 0)
3910 return hard_reset_done;
3911
3912 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3913 ioc->name));
3914
3915 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3916 for (cnt=0; cnt<cntdn; cnt++) {
3917 ioc_state = mpt_GetIocState(ioc, 1);
3918 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3919 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3920 ioc->name, cnt));
3921 return hard_reset_done;
3922 }
3923 if (sleepFlag == CAN_SLEEP) {
3924 msleep (10);
3925 } else {
3926 mdelay (10);
3927 }
3928 }
3929
3930 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3931 ioc->name, mpt_GetIocState(ioc, 0)));
3932 return -1;
3933}
3934
3935/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3936/**
3937 * mpt_diag_reset - Perform hard reset of the adapter.
3938 * @ioc: Pointer to MPT_ADAPTER structure
3939 * @ignore: Set if to honor and clear to ignore
3940 * the reset history bit
3941 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3942 * else set to NO_SLEEP (use mdelay instead)
3943 *
3944 * This routine places the adapter in diagnostic mode via the
3945 * WriteSequence register and then performs a hard reset of adapter
3946 * via the Diagnostic register. Adapter should be in ready state
3947 * upon successful completion.
3948 *
3949 * Returns: 1 hard reset successful
3950 * 0 no reset performed because reset history bit set
3951 * -2 enabling diagnostic mode failed
3952 * -3 diagnostic reset failed
3953 */
3954static int
3955mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3956{
3957 u32 diag0val;
3958 u32 doorbell;
3959 int hard_reset_done = 0;
3960 int count = 0;
3961 u32 diag1val = 0;
3962 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3963 u8 cb_idx;
3964
3965 /* Clear any existing interrupts */
3966 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3967
3968 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3969
3970 if (!ignore)
3971 return 0;
3972
3973 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3974 "address=%p\n", ioc->name, __func__,
3975 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3976 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3977 if (sleepFlag == CAN_SLEEP)
3978 msleep(1);
3979 else
3980 mdelay(1);
3981
3982 /*
3983 * Call each currently registered protocol IOC reset handler
3984 * with pre-reset indication.
3985 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3986 * MptResetHandlers[] registered yet.
3987 */
3988 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
3989 if (MptResetHandlers[cb_idx])
3990 (*(MptResetHandlers[cb_idx]))(ioc,
3991 MPT_IOC_PRE_RESET);
3992 }
3993
3994 for (count = 0; count < 60; count ++) {
3995 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
3996 doorbell &= MPI_IOC_STATE_MASK;
3997
3998 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3999 "looking for READY STATE: doorbell=%x"
4000 " count=%d\n",
4001 ioc->name, doorbell, count));
4002
4003 if (doorbell == MPI_IOC_STATE_READY) {
4004 return 1;
4005 }
4006
4007 /* wait 1 sec */
4008 if (sleepFlag == CAN_SLEEP)
4009 msleep(1000);
4010 else
4011 mdelay(1000);
4012 }
4013 return -1;
4014 }
4015
4016 /* Use "Diagnostic reset" method! (only thing available!) */
4017 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4018
4019 if (ioc->debug_level & MPT_DEBUG) {
4020 if (ioc->alt_ioc)
4021 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4022 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4023 ioc->name, diag0val, diag1val));
4024 }
4025
4026 /* Do the reset if we are told to ignore the reset history
4027 * or if the reset history is 0
4028 */
4029 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4030 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4031 /* Write magic sequence to WriteSequence register
4032 * Loop until in diagnostic mode
4033 */
4034 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4035 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4036 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4037 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4038 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4039 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4040
4041 /* wait 100 msec */
4042 if (sleepFlag == CAN_SLEEP) {
4043 msleep (100);
4044 } else {
4045 mdelay (100);
4046 }
4047
4048 count++;
4049 if (count > 20) {
4050 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4051 ioc->name, diag0val);
4052 return -2;
4053
4054 }
4055
4056 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4057
4058 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4059 ioc->name, diag0val));
4060 }
4061
4062 if (ioc->debug_level & MPT_DEBUG) {
4063 if (ioc->alt_ioc)
4064 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4065 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4066 ioc->name, diag0val, diag1val));
4067 }
4068 /*
4069 * Disable the ARM (Bug fix)
4070 *
4071 */
4072 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4073 mdelay(1);
4074
4075 /*
4076 * Now hit the reset bit in the Diagnostic register
4077 * (THE BIG HAMMER!) (Clears DRWE bit).
4078 */
4079 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4080 hard_reset_done = 1;
4081 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4082 ioc->name));
4083
4084 /*
4085 * Call each currently registered protocol IOC reset handler
4086 * with pre-reset indication.
4087 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4088 * MptResetHandlers[] registered yet.
4089 */
4090 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4091 if (MptResetHandlers[cb_idx]) {
4092 mpt_signal_reset(cb_idx,
4093 ioc, MPT_IOC_PRE_RESET);
4094 if (ioc->alt_ioc) {
4095 mpt_signal_reset(cb_idx,
4096 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4097 }
4098 }
4099 }
4100
4101 if (ioc->cached_fw)
4102 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4103 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4104 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4105 else
4106 cached_fw = NULL;
4107 if (cached_fw) {
4108 /* If the DownloadBoot operation fails, the
4109 * IOC will be left unusable. This is a fatal error
4110 * case. _diag_reset will return < 0
4111 */
4112 for (count = 0; count < 30; count ++) {
4113 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4114 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4115 break;
4116 }
4117
4118 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4119 ioc->name, diag0val, count));
4120 /* wait 1 sec */
4121 if (sleepFlag == CAN_SLEEP) {
4122 msleep (1000);
4123 } else {
4124 mdelay (1000);
4125 }
4126 }
4127 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4128 printk(MYIOC_s_WARN_FMT
4129 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4130 }
4131
4132 } else {
4133 /* Wait for FW to reload and for board
4134 * to go to the READY state.
4135 * Maximum wait is 60 seconds.
4136 * If fail, no error will check again
4137 * with calling program.
4138 */
4139 for (count = 0; count < 60; count ++) {
4140 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4141 doorbell &= MPI_IOC_STATE_MASK;
4142
4143 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4144 "looking for READY STATE: doorbell=%x"
4145 " count=%d\n", ioc->name, doorbell, count));
4146
4147 if (doorbell == MPI_IOC_STATE_READY) {
4148 break;
4149 }
4150
4151 /* wait 1 sec */
4152 if (sleepFlag == CAN_SLEEP) {
4153 msleep (1000);
4154 } else {
4155 mdelay (1000);
4156 }
4157 }
4158
4159 if (doorbell != MPI_IOC_STATE_READY)
4160 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4161 "after reset! IocState=%x", ioc->name,
4162 doorbell);
4163 }
4164 }
4165
4166 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4167 if (ioc->debug_level & MPT_DEBUG) {
4168 if (ioc->alt_ioc)
4169 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4170 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4171 ioc->name, diag0val, diag1val));
4172 }
4173
4174 /* Clear RESET_HISTORY bit! Place board in the
4175 * diagnostic mode to update the diag register.
4176 */
4177 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4178 count = 0;
4179 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4180 /* Write magic sequence to WriteSequence register
4181 * Loop until in diagnostic mode
4182 */
4183 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4184 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4185 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4186 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4187 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4188 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4189
4190 /* wait 100 msec */
4191 if (sleepFlag == CAN_SLEEP) {
4192 msleep (100);
4193 } else {
4194 mdelay (100);
4195 }
4196
4197 count++;
4198 if (count > 20) {
4199 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4200 ioc->name, diag0val);
4201 break;
4202 }
4203 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4204 }
4205 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4206 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4207 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4208 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4209 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4210 ioc->name);
4211 }
4212
4213 /* Disable Diagnostic Mode
4214 */
4215 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4216
4217 /* Check FW reload status flags.
4218 */
4219 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4220 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4221 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4222 ioc->name, diag0val);
4223 return -3;
4224 }
4225
4226 if (ioc->debug_level & MPT_DEBUG) {
4227 if (ioc->alt_ioc)
4228 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4229 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4230 ioc->name, diag0val, diag1val));
4231 }
4232
4233 /*
4234 * Reset flag that says we've enabled event notification
4235 */
4236 ioc->facts.EventState = 0;
4237
4238 if (ioc->alt_ioc)
4239 ioc->alt_ioc->facts.EventState = 0;
4240
4241 return hard_reset_done;
4242}
4243
4244/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4245/**
4246 * SendIocReset - Send IOCReset request to MPT adapter.
4247 * @ioc: Pointer to MPT_ADAPTER structure
4248 * @reset_type: reset type, expected values are
4249 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4250 * @sleepFlag: Specifies whether the process can sleep
4251 *
4252 * Send IOCReset request to the MPT adapter.
4253 *
4254 * Returns 0 for success, non-zero for failure.
4255 */
4256static int
4257SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4258{
4259 int r;
4260 u32 state;
4261 int cntdn, count;
4262
4263 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4264 ioc->name, reset_type));
4265 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4266 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4267 return r;
4268
4269 /* FW ACK'd request, wait for READY state
4270 */
4271 count = 0;
4272 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4273
4274 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4275 cntdn--;
4276 count++;
4277 if (!cntdn) {
4278 if (sleepFlag != CAN_SLEEP)
4279 count *= 10;
4280
4281 printk(MYIOC_s_ERR_FMT
4282 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4283 ioc->name, state, (int)((count+5)/HZ));
4284 return -ETIME;
4285 }
4286
4287 if (sleepFlag == CAN_SLEEP) {
4288 msleep(1);
4289 } else {
4290 mdelay (1); /* 1 msec delay */
4291 }
4292 }
4293
4294 /* TODO!
4295 * Cleanup all event stuff for this IOC; re-issue EventNotification
4296 * request if needed.
4297 */
4298 if (ioc->facts.Function)
4299 ioc->facts.EventState = 0;
4300
4301 return 0;
4302}
4303
4304/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4305/**
4306 * initChainBuffers - Allocate memory for and initialize chain buffers
4307 * @ioc: Pointer to MPT_ADAPTER structure
4308 *
4309 * Allocates memory for and initializes chain buffers,
4310 * chain buffer control arrays and spinlock.
4311 */
4312static int
4313initChainBuffers(MPT_ADAPTER *ioc)
4314{
4315 u8 *mem;
4316 int sz, ii, num_chain;
4317 int scale, num_sge, numSGE;
4318
4319 /* ReqToChain size must equal the req_depth
4320 * index = req_idx
4321 */
4322 if (ioc->ReqToChain == NULL) {
4323 sz = ioc->req_depth * sizeof(int);
4324 mem = kmalloc(sz, GFP_ATOMIC);
4325 if (mem == NULL)
4326 return -1;
4327
4328 ioc->ReqToChain = (int *) mem;
4329 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4330 ioc->name, mem, sz));
4331 mem = kmalloc(sz, GFP_ATOMIC);
4332 if (mem == NULL)
4333 return -1;
4334
4335 ioc->RequestNB = (int *) mem;
4336 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4337 ioc->name, mem, sz));
4338 }
4339 for (ii = 0; ii < ioc->req_depth; ii++) {
4340 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4341 }
4342
4343 /* ChainToChain size must equal the total number
4344 * of chain buffers to be allocated.
4345 * index = chain_idx
4346 *
4347 * Calculate the number of chain buffers needed(plus 1) per I/O
4348 * then multiply the maximum number of simultaneous cmds
4349 *
4350 * num_sge = num sge in request frame + last chain buffer
4351 * scale = num sge per chain buffer if no chain element
4352 */
4353 scale = ioc->req_sz / ioc->SGE_size;
4354 if (ioc->sg_addr_size == sizeof(u64))
4355 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4356 else
4357 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4358
4359 if (ioc->sg_addr_size == sizeof(u64)) {
4360 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4361 (ioc->req_sz - 60) / ioc->SGE_size;
4362 } else {
4363 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4364 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4365 }
4366 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4367 ioc->name, num_sge, numSGE));
4368
4369 if (ioc->bus_type == FC) {
4370 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4371 numSGE = MPT_SCSI_FC_SG_DEPTH;
4372 } else {
4373 if (numSGE > MPT_SCSI_SG_DEPTH)
4374 numSGE = MPT_SCSI_SG_DEPTH;
4375 }
4376
4377 num_chain = 1;
4378 while (numSGE - num_sge > 0) {
4379 num_chain++;
4380 num_sge += (scale - 1);
4381 }
4382 num_chain++;
4383
4384 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4385 ioc->name, numSGE, num_sge, num_chain));
4386
4387 if (ioc->bus_type == SPI)
4388 num_chain *= MPT_SCSI_CAN_QUEUE;
4389 else if (ioc->bus_type == SAS)
4390 num_chain *= MPT_SAS_CAN_QUEUE;
4391 else
4392 num_chain *= MPT_FC_CAN_QUEUE;
4393
4394 ioc->num_chain = num_chain;
4395
4396 sz = num_chain * sizeof(int);
4397 if (ioc->ChainToChain == NULL) {
4398 mem = kmalloc(sz, GFP_ATOMIC);
4399 if (mem == NULL)
4400 return -1;
4401
4402 ioc->ChainToChain = (int *) mem;
4403 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4404 ioc->name, mem, sz));
4405 } else {
4406 mem = (u8 *) ioc->ChainToChain;
4407 }
4408 memset(mem, 0xFF, sz);
4409 return num_chain;
4410}
4411
4412/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4413/**
4414 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4415 * @ioc: Pointer to MPT_ADAPTER structure
4416 *
4417 * This routine allocates memory for the MPT reply and request frame
4418 * pools (if necessary), and primes the IOC reply FIFO with
4419 * reply frames.
4420 *
4421 * Returns 0 for success, non-zero for failure.
4422 */
4423static int
4424PrimeIocFifos(MPT_ADAPTER *ioc)
4425{
4426 MPT_FRAME_HDR *mf;
4427 unsigned long flags;
4428 dma_addr_t alloc_dma;
4429 u8 *mem;
4430 int i, reply_sz, sz, total_size, num_chain;
4431 u64 dma_mask;
4432
4433 dma_mask = 0;
4434
4435 /* Prime reply FIFO... */
4436
4437 if (ioc->reply_frames == NULL) {
4438 if ( (num_chain = initChainBuffers(ioc)) < 0)
4439 return -1;
4440 /*
4441 * 1078 errata workaround for the 36GB limitation
4442 */
4443 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4444 ioc->dma_mask > DMA_BIT_MASK(35)) {
4445 if (!dma_set_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32))
4446 && !dma_set_coherent_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32))) {
4447 dma_mask = DMA_BIT_MASK(35);
4448 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4449 "setting 35 bit addressing for "
4450 "Request/Reply/Chain and Sense Buffers\n",
4451 ioc->name));
4452 } else {
4453 /*Reseting DMA mask to 64 bit*/
4454 dma_set_mask(&ioc->pcidev->dev,
4455 DMA_BIT_MASK(64));
4456 dma_set_coherent_mask(&ioc->pcidev->dev,
4457 DMA_BIT_MASK(64));
4458
4459 printk(MYIOC_s_ERR_FMT
4460 "failed setting 35 bit addressing for "
4461 "Request/Reply/Chain and Sense Buffers\n",
4462 ioc->name);
4463 return -1;
4464 }
4465 }
4466
4467 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4468 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4469 ioc->name, ioc->reply_sz, ioc->reply_depth));
4470 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4471 ioc->name, reply_sz, reply_sz));
4472
4473 sz = (ioc->req_sz * ioc->req_depth);
4474 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4475 ioc->name, ioc->req_sz, ioc->req_depth));
4476 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4477 ioc->name, sz, sz));
4478 total_size += sz;
4479
4480 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4481 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4482 ioc->name, ioc->req_sz, num_chain));
4483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4484 ioc->name, sz, sz, num_chain));
4485
4486 total_size += sz;
4487 mem = dma_alloc_coherent(&ioc->pcidev->dev, total_size,
4488 &alloc_dma, GFP_KERNEL);
4489 if (mem == NULL) {
4490 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4491 ioc->name);
4492 goto out_fail;
4493 }
4494
4495 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4496 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4497
4498 memset(mem, 0, total_size);
4499 ioc->alloc_total += total_size;
4500 ioc->alloc = mem;
4501 ioc->alloc_dma = alloc_dma;
4502 ioc->alloc_sz = total_size;
4503 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4504 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4505
4506 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4507 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4508
4509 alloc_dma += reply_sz;
4510 mem += reply_sz;
4511
4512 /* Request FIFO - WE manage this! */
4513
4514 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4515 ioc->req_frames_dma = alloc_dma;
4516
4517 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4518 ioc->name, mem, (void *)(ulong)alloc_dma));
4519
4520 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4521
4522 for (i = 0; i < ioc->req_depth; i++) {
4523 alloc_dma += ioc->req_sz;
4524 mem += ioc->req_sz;
4525 }
4526
4527 ioc->ChainBuffer = mem;
4528 ioc->ChainBufferDMA = alloc_dma;
4529
4530 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4531 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4532
4533 /* Initialize the free chain Q.
4534 */
4535
4536 INIT_LIST_HEAD(&ioc->FreeChainQ);
4537
4538 /* Post the chain buffers to the FreeChainQ.
4539 */
4540 mem = (u8 *)ioc->ChainBuffer;
4541 for (i=0; i < num_chain; i++) {
4542 mf = (MPT_FRAME_HDR *) mem;
4543 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4544 mem += ioc->req_sz;
4545 }
4546
4547 /* Initialize Request frames linked list
4548 */
4549 alloc_dma = ioc->req_frames_dma;
4550 mem = (u8 *) ioc->req_frames;
4551
4552 spin_lock_irqsave(&ioc->FreeQlock, flags);
4553 INIT_LIST_HEAD(&ioc->FreeQ);
4554 for (i = 0; i < ioc->req_depth; i++) {
4555 mf = (MPT_FRAME_HDR *) mem;
4556
4557 /* Queue REQUESTs *internally*! */
4558 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4559
4560 mem += ioc->req_sz;
4561 }
4562 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4563
4564 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4565 ioc->sense_buf_pool = dma_alloc_coherent(&ioc->pcidev->dev, sz,
4566 &ioc->sense_buf_pool_dma, GFP_KERNEL);
4567 if (ioc->sense_buf_pool == NULL) {
4568 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4569 ioc->name);
4570 goto out_fail;
4571 }
4572
4573 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4574 ioc->alloc_total += sz;
4575 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4576 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4577
4578 }
4579
4580 /* Post Reply frames to FIFO
4581 */
4582 alloc_dma = ioc->alloc_dma;
4583 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4584 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4585
4586 for (i = 0; i < ioc->reply_depth; i++) {
4587 /* Write each address to the IOC! */
4588 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4589 alloc_dma += ioc->reply_sz;
4590 }
4591
4592 if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev,
4593 ioc->dma_mask) && !dma_set_coherent_mask(&ioc->pcidev->dev,
4594 ioc->dma_mask))
4595 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4596 "restoring 64 bit addressing\n", ioc->name));
4597
4598 return 0;
4599
4600out_fail:
4601
4602 if (ioc->alloc != NULL) {
4603 sz = ioc->alloc_sz;
4604 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc,
4605 ioc->alloc_dma);
4606 ioc->reply_frames = NULL;
4607 ioc->req_frames = NULL;
4608 ioc->alloc_total -= sz;
4609 }
4610 if (ioc->sense_buf_pool != NULL) {
4611 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4612 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool,
4613 ioc->sense_buf_pool_dma);
4614 ioc->sense_buf_pool = NULL;
4615 }
4616
4617 if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev,
4618 DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&ioc->pcidev->dev,
4619 DMA_BIT_MASK(64)))
4620 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4621 "restoring 64 bit addressing\n", ioc->name));
4622
4623 return -1;
4624}
4625
4626/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4627/**
4628 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4629 * from IOC via doorbell handshake method.
4630 * @ioc: Pointer to MPT_ADAPTER structure
4631 * @reqBytes: Size of the request in bytes
4632 * @req: Pointer to MPT request frame
4633 * @replyBytes: Expected size of the reply in bytes
4634 * @u16reply: Pointer to area where reply should be written
4635 * @maxwait: Max wait time for a reply (in seconds)
4636 * @sleepFlag: Specifies whether the process can sleep
4637 *
4638 * NOTES: It is the callers responsibility to byte-swap fields in the
4639 * request which are greater than 1 byte in size. It is also the
4640 * callers responsibility to byte-swap response fields which are
4641 * greater than 1 byte in size.
4642 *
4643 * Returns 0 for success, non-zero for failure.
4644 */
4645static int
4646mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4647 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4648{
4649 MPIDefaultReply_t *mptReply;
4650 int failcnt = 0;
4651 int t;
4652
4653 /*
4654 * Get ready to cache a handshake reply
4655 */
4656 ioc->hs_reply_idx = 0;
4657 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4658 mptReply->MsgLength = 0;
4659
4660 /*
4661 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4662 * then tell IOC that we want to handshake a request of N words.
4663 * (WRITE u32val to Doorbell reg).
4664 */
4665 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4666 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4667 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4668 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4669
4670 /*
4671 * Wait for IOC's doorbell handshake int
4672 */
4673 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4674 failcnt++;
4675
4676 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4677 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4678
4679 /* Read doorbell and check for active bit */
4680 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4681 return -1;
4682
4683 /*
4684 * Clear doorbell int (WRITE 0 to IntStatus reg),
4685 * then wait for IOC to ACKnowledge that it's ready for
4686 * our handshake request.
4687 */
4688 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4689 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4690 failcnt++;
4691
4692 if (!failcnt) {
4693 int ii;
4694 u8 *req_as_bytes = (u8 *) req;
4695
4696 /*
4697 * Stuff request words via doorbell handshake,
4698 * with ACK from IOC for each.
4699 */
4700 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4701 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4702 (req_as_bytes[(ii*4) + 1] << 8) |
4703 (req_as_bytes[(ii*4) + 2] << 16) |
4704 (req_as_bytes[(ii*4) + 3] << 24));
4705
4706 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4707 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4708 failcnt++;
4709 }
4710
4711 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4712 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4713
4714 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4715 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4716
4717 /*
4718 * Wait for completion of doorbell handshake reply from the IOC
4719 */
4720 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4721 failcnt++;
4722
4723 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4724 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4725
4726 /*
4727 * Copy out the cached reply...
4728 */
4729 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4730 u16reply[ii] = ioc->hs_reply[ii];
4731 } else {
4732 return -99;
4733 }
4734
4735 return -failcnt;
4736}
4737
4738/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4739/**
4740 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4741 * @ioc: Pointer to MPT_ADAPTER structure
4742 * @howlong: How long to wait (in seconds)
4743 * @sleepFlag: Specifies whether the process can sleep
4744 *
4745 * This routine waits (up to ~2 seconds max) for IOC doorbell
4746 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4747 * bit in its IntStatus register being clear.
4748 *
4749 * Returns a negative value on failure, else wait loop count.
4750 */
4751static int
4752WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4753{
4754 int cntdn;
4755 int count = 0;
4756 u32 intstat=0;
4757
4758 cntdn = 1000 * howlong;
4759
4760 if (sleepFlag == CAN_SLEEP) {
4761 while (--cntdn) {
4762 msleep (1);
4763 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4764 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4765 break;
4766 count++;
4767 }
4768 } else {
4769 while (--cntdn) {
4770 udelay (1000);
4771 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4772 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4773 break;
4774 count++;
4775 }
4776 }
4777
4778 if (cntdn) {
4779 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4780 ioc->name, count));
4781 return count;
4782 }
4783
4784 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4785 ioc->name, count, intstat);
4786 return -1;
4787}
4788
4789/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4790/**
4791 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4792 * @ioc: Pointer to MPT_ADAPTER structure
4793 * @howlong: How long to wait (in seconds)
4794 * @sleepFlag: Specifies whether the process can sleep
4795 *
4796 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4797 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4798 *
4799 * Returns a negative value on failure, else wait loop count.
4800 */
4801static int
4802WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4803{
4804 int cntdn;
4805 int count = 0;
4806 u32 intstat=0;
4807
4808 cntdn = 1000 * howlong;
4809 if (sleepFlag == CAN_SLEEP) {
4810 while (--cntdn) {
4811 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4812 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4813 break;
4814 msleep(1);
4815 count++;
4816 }
4817 } else {
4818 while (--cntdn) {
4819 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4820 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4821 break;
4822 udelay (1000);
4823 count++;
4824 }
4825 }
4826
4827 if (cntdn) {
4828 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4829 ioc->name, count, howlong));
4830 return count;
4831 }
4832
4833 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4834 ioc->name, count, intstat);
4835 return -1;
4836}
4837
4838/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4839/**
4840 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4841 * @ioc: Pointer to MPT_ADAPTER structure
4842 * @howlong: How long to wait (in seconds)
4843 * @sleepFlag: Specifies whether the process can sleep
4844 *
4845 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4846 * Reply is cached to IOC private area large enough to hold a maximum
4847 * of 128 bytes of reply data.
4848 *
4849 * Returns a negative value on failure, else size of reply in WORDS.
4850 */
4851static int
4852WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4853{
4854 int u16cnt = 0;
4855 int failcnt = 0;
4856 int t;
4857 u16 *hs_reply = ioc->hs_reply;
4858 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4859 u16 hword;
4860
4861 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4862
4863 /*
4864 * Get first two u16's so we can look at IOC's intended reply MsgLength
4865 */
4866 u16cnt=0;
4867 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4868 failcnt++;
4869 } else {
4870 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4871 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4872 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4873 failcnt++;
4874 else {
4875 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4876 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4877 }
4878 }
4879
4880 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4881 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4882 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4883
4884 /*
4885 * If no error (and IOC said MsgLength is > 0), piece together
4886 * reply 16 bits at a time.
4887 */
4888 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4889 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4890 failcnt++;
4891 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4892 /* don't overflow our IOC hs_reply[] buffer! */
4893 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4894 hs_reply[u16cnt] = hword;
4895 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4896 }
4897
4898 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4899 failcnt++;
4900 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4901
4902 if (failcnt) {
4903 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4904 ioc->name);
4905 return -failcnt;
4906 }
4907#if 0
4908 else if (u16cnt != (2 * mptReply->MsgLength)) {
4909 return -101;
4910 }
4911 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4912 return -102;
4913 }
4914#endif
4915
4916 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4917 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4918
4919 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4920 ioc->name, t, u16cnt/2));
4921 return u16cnt/2;
4922}
4923
4924/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4925/**
4926 * GetLanConfigPages - Fetch LANConfig pages.
4927 * @ioc: Pointer to MPT_ADAPTER structure
4928 *
4929 * Return: 0 for success
4930 * -ENOMEM if no memory available
4931 * -EPERM if not allowed due to ISR context
4932 * -EAGAIN if no msg frames currently available
4933 * -EFAULT for non-successful reply or no reply (timeout)
4934 */
4935static int
4936GetLanConfigPages(MPT_ADAPTER *ioc)
4937{
4938 ConfigPageHeader_t hdr;
4939 CONFIGPARMS cfg;
4940 LANPage0_t *ppage0_alloc;
4941 dma_addr_t page0_dma;
4942 LANPage1_t *ppage1_alloc;
4943 dma_addr_t page1_dma;
4944 int rc = 0;
4945 int data_sz;
4946 int copy_sz;
4947
4948 /* Get LAN Page 0 header */
4949 hdr.PageVersion = 0;
4950 hdr.PageLength = 0;
4951 hdr.PageNumber = 0;
4952 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4953 cfg.cfghdr.hdr = &hdr;
4954 cfg.physAddr = -1;
4955 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4956 cfg.dir = 0;
4957 cfg.pageAddr = 0;
4958 cfg.timeout = 0;
4959
4960 if ((rc = mpt_config(ioc, &cfg)) != 0)
4961 return rc;
4962
4963 if (hdr.PageLength > 0) {
4964 data_sz = hdr.PageLength * 4;
4965 ppage0_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz,
4966 &page0_dma, GFP_KERNEL);
4967 rc = -ENOMEM;
4968 if (ppage0_alloc) {
4969 memset((u8 *)ppage0_alloc, 0, data_sz);
4970 cfg.physAddr = page0_dma;
4971 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4972
4973 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4974 /* save the data */
4975 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4976 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4977
4978 }
4979
4980 dma_free_coherent(&ioc->pcidev->dev, data_sz,
4981 (u8 *)ppage0_alloc, page0_dma);
4982
4983 /* FIXME!
4984 * Normalize endianness of structure data,
4985 * by byte-swapping all > 1 byte fields!
4986 */
4987
4988 }
4989
4990 if (rc)
4991 return rc;
4992 }
4993
4994 /* Get LAN Page 1 header */
4995 hdr.PageVersion = 0;
4996 hdr.PageLength = 0;
4997 hdr.PageNumber = 1;
4998 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4999 cfg.cfghdr.hdr = &hdr;
5000 cfg.physAddr = -1;
5001 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5002 cfg.dir = 0;
5003 cfg.pageAddr = 0;
5004
5005 if ((rc = mpt_config(ioc, &cfg)) != 0)
5006 return rc;
5007
5008 if (hdr.PageLength == 0)
5009 return 0;
5010
5011 data_sz = hdr.PageLength * 4;
5012 rc = -ENOMEM;
5013 ppage1_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz,
5014 &page1_dma, GFP_KERNEL);
5015 if (ppage1_alloc) {
5016 memset((u8 *)ppage1_alloc, 0, data_sz);
5017 cfg.physAddr = page1_dma;
5018 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5019
5020 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5021 /* save the data */
5022 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5023 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5024 }
5025
5026 dma_free_coherent(&ioc->pcidev->dev, data_sz,
5027 (u8 *)ppage1_alloc, page1_dma);
5028
5029 /* FIXME!
5030 * Normalize endianness of structure data,
5031 * by byte-swapping all > 1 byte fields!
5032 */
5033
5034 }
5035
5036 return rc;
5037}
5038
5039/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5040/**
5041 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5042 * @ioc: Pointer to MPT_ADAPTER structure
5043 * @persist_opcode: see below
5044 *
5045 * =============================== ======================================
5046 * MPI_SAS_OP_CLEAR_NOT_PRESENT Free all persist TargetID mappings for
5047 * devices not currently present.
5048 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT Clear al persist TargetID mappings
5049 * =============================== ======================================
5050 *
5051 * NOTE: Don't use not this function during interrupt time.
5052 *
5053 * Returns 0 for success, non-zero error
5054 */
5055
5056/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5057int
5058mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5059{
5060 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5061 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5062 MPT_FRAME_HDR *mf = NULL;
5063 MPIHeader_t *mpi_hdr;
5064 int ret = 0;
5065 unsigned long timeleft;
5066
5067 mutex_lock(&ioc->mptbase_cmds.mutex);
5068
5069 /* init the internal cmd struct */
5070 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5071 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5072
5073 /* insure garbage is not sent to fw */
5074 switch(persist_opcode) {
5075
5076 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5077 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5078 break;
5079
5080 default:
5081 ret = -1;
5082 goto out;
5083 }
5084
5085 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5086 __func__, persist_opcode);
5087
5088 /* Get a MF for this command.
5089 */
5090 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5091 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5092 ret = -1;
5093 goto out;
5094 }
5095
5096 mpi_hdr = (MPIHeader_t *) mf;
5097 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5098 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5099 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5100 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5101 sasIoUnitCntrReq->Operation = persist_opcode;
5102
5103 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5104 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5105 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5106 ret = -ETIME;
5107 printk(KERN_DEBUG "%s: failed\n", __func__);
5108 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5109 goto out;
5110 if (!timeleft) {
5111 printk(MYIOC_s_WARN_FMT
5112 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5113 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5114 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5115 mpt_free_msg_frame(ioc, mf);
5116 }
5117 goto out;
5118 }
5119
5120 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5121 ret = -1;
5122 goto out;
5123 }
5124
5125 sasIoUnitCntrReply =
5126 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5127 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5128 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5129 __func__, sasIoUnitCntrReply->IOCStatus,
5130 sasIoUnitCntrReply->IOCLogInfo);
5131 printk(KERN_DEBUG "%s: failed\n", __func__);
5132 ret = -1;
5133 } else
5134 printk(KERN_DEBUG "%s: success\n", __func__);
5135 out:
5136
5137 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5138 mutex_unlock(&ioc->mptbase_cmds.mutex);
5139 return ret;
5140}
5141
5142/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5143
5144static void
5145mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5146 MpiEventDataRaid_t * pRaidEventData)
5147{
5148 int volume;
5149 int reason;
5150 int disk;
5151 int status;
5152 int flags;
5153 int state;
5154
5155 volume = pRaidEventData->VolumeID;
5156 reason = pRaidEventData->ReasonCode;
5157 disk = pRaidEventData->PhysDiskNum;
5158 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5159 flags = (status >> 0) & 0xff;
5160 state = (status >> 8) & 0xff;
5161
5162 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5163 return;
5164 }
5165
5166 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5167 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5168 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5169 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5170 ioc->name, disk, volume);
5171 } else {
5172 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5173 ioc->name, volume);
5174 }
5175
5176 switch(reason) {
5177 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5178 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5179 ioc->name);
5180 break;
5181
5182 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5183
5184 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5185 ioc->name);
5186 break;
5187
5188 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5189 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5190 ioc->name);
5191 break;
5192
5193 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5194 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5195 ioc->name,
5196 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5197 ? "optimal"
5198 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5199 ? "degraded"
5200 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5201 ? "failed"
5202 : "state unknown",
5203 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5204 ? ", enabled" : "",
5205 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5206 ? ", quiesced" : "",
5207 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5208 ? ", resync in progress" : "" );
5209 break;
5210
5211 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5212 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5213 ioc->name, disk);
5214 break;
5215
5216 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5217 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5218 ioc->name);
5219 break;
5220
5221 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5222 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5223 ioc->name);
5224 break;
5225
5226 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5227 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5228 ioc->name);
5229 break;
5230
5231 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5232 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5233 ioc->name,
5234 state == MPI_PHYSDISK0_STATUS_ONLINE
5235 ? "online"
5236 : state == MPI_PHYSDISK0_STATUS_MISSING
5237 ? "missing"
5238 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5239 ? "not compatible"
5240 : state == MPI_PHYSDISK0_STATUS_FAILED
5241 ? "failed"
5242 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5243 ? "initializing"
5244 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5245 ? "offline requested"
5246 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5247 ? "failed requested"
5248 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5249 ? "offline"
5250 : "state unknown",
5251 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5252 ? ", out of sync" : "",
5253 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5254 ? ", quiesced" : "" );
5255 break;
5256
5257 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5258 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5259 ioc->name, disk);
5260 break;
5261
5262 case MPI_EVENT_RAID_RC_SMART_DATA:
5263 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5264 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5265 break;
5266
5267 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5268 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5269 ioc->name, disk);
5270 break;
5271 }
5272}
5273
5274/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5275/**
5276 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5277 * @ioc: Pointer to MPT_ADAPTER structure
5278 *
5279 * Returns: 0 for success
5280 * -ENOMEM if no memory available
5281 * -EPERM if not allowed due to ISR context
5282 * -EAGAIN if no msg frames currently available
5283 * -EFAULT for non-successful reply or no reply (timeout)
5284 */
5285static int
5286GetIoUnitPage2(MPT_ADAPTER *ioc)
5287{
5288 ConfigPageHeader_t hdr;
5289 CONFIGPARMS cfg;
5290 IOUnitPage2_t *ppage_alloc;
5291 dma_addr_t page_dma;
5292 int data_sz;
5293 int rc;
5294
5295 /* Get the page header */
5296 hdr.PageVersion = 0;
5297 hdr.PageLength = 0;
5298 hdr.PageNumber = 2;
5299 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5300 cfg.cfghdr.hdr = &hdr;
5301 cfg.physAddr = -1;
5302 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5303 cfg.dir = 0;
5304 cfg.pageAddr = 0;
5305 cfg.timeout = 0;
5306
5307 if ((rc = mpt_config(ioc, &cfg)) != 0)
5308 return rc;
5309
5310 if (hdr.PageLength == 0)
5311 return 0;
5312
5313 /* Read the config page */
5314 data_sz = hdr.PageLength * 4;
5315 rc = -ENOMEM;
5316 ppage_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz,
5317 &page_dma, GFP_KERNEL);
5318 if (ppage_alloc) {
5319 memset((u8 *)ppage_alloc, 0, data_sz);
5320 cfg.physAddr = page_dma;
5321 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5322
5323 /* If Good, save data */
5324 if ((rc = mpt_config(ioc, &cfg)) == 0)
5325 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5326
5327 dma_free_coherent(&ioc->pcidev->dev, data_sz,
5328 (u8 *)ppage_alloc, page_dma);
5329 }
5330
5331 return rc;
5332}
5333
5334/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5335/**
5336 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5337 * @ioc: Pointer to a Adapter Strucutre
5338 * @portnum: IOC port number
5339 *
5340 * Return: -EFAULT if read of config page header fails
5341 * or if no nvram
5342 * If read of SCSI Port Page 0 fails,
5343 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5344 * Adapter settings: async, narrow
5345 * Return 1
5346 * If read of SCSI Port Page 2 fails,
5347 * Adapter settings valid
5348 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5349 * Return 1
5350 * Else
5351 * Both valid
5352 * Return 0
5353 * CHECK - what type of locking mechanisms should be used????
5354 */
5355static int
5356mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5357{
5358 u8 *pbuf;
5359 dma_addr_t buf_dma;
5360 CONFIGPARMS cfg;
5361 ConfigPageHeader_t header;
5362 int ii;
5363 int data, rc = 0;
5364
5365 /* Allocate memory
5366 */
5367 if (!ioc->spi_data.nvram) {
5368 int sz;
5369 u8 *mem;
5370 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5371 mem = kmalloc(sz, GFP_ATOMIC);
5372 if (mem == NULL)
5373 return -EFAULT;
5374
5375 ioc->spi_data.nvram = (int *) mem;
5376
5377 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5378 ioc->name, ioc->spi_data.nvram, sz));
5379 }
5380
5381 /* Invalidate NVRAM information
5382 */
5383 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5384 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5385 }
5386
5387 /* Read SPP0 header, allocate memory, then read page.
5388 */
5389 header.PageVersion = 0;
5390 header.PageLength = 0;
5391 header.PageNumber = 0;
5392 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5393 cfg.cfghdr.hdr = &header;
5394 cfg.physAddr = -1;
5395 cfg.pageAddr = portnum;
5396 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5397 cfg.dir = 0;
5398 cfg.timeout = 0; /* use default */
5399 if (mpt_config(ioc, &cfg) != 0)
5400 return -EFAULT;
5401
5402 if (header.PageLength > 0) {
5403 pbuf = dma_alloc_coherent(&ioc->pcidev->dev,
5404 header.PageLength * 4, &buf_dma,
5405 GFP_KERNEL);
5406 if (pbuf) {
5407 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5408 cfg.physAddr = buf_dma;
5409 if (mpt_config(ioc, &cfg) != 0) {
5410 ioc->spi_data.maxBusWidth = MPT_NARROW;
5411 ioc->spi_data.maxSyncOffset = 0;
5412 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5413 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5414 rc = 1;
5415 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5416 "Unable to read PortPage0 minSyncFactor=%x\n",
5417 ioc->name, ioc->spi_data.minSyncFactor));
5418 } else {
5419 /* Save the Port Page 0 data
5420 */
5421 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5422 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5423 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5424
5425 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5426 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5427 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5428 "noQas due to Capabilities=%x\n",
5429 ioc->name, pPP0->Capabilities));
5430 }
5431 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5432 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5433 if (data) {
5434 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5435 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5436 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5437 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5438 "PortPage0 minSyncFactor=%x\n",
5439 ioc->name, ioc->spi_data.minSyncFactor));
5440 } else {
5441 ioc->spi_data.maxSyncOffset = 0;
5442 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5443 }
5444
5445 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5446
5447 /* Update the minSyncFactor based on bus type.
5448 */
5449 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5450 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5451
5452 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5453 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5454 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5455 "HVD or SE detected, minSyncFactor=%x\n",
5456 ioc->name, ioc->spi_data.minSyncFactor));
5457 }
5458 }
5459 }
5460 if (pbuf) {
5461 dma_free_coherent(&ioc->pcidev->dev,
5462 header.PageLength * 4, pbuf,
5463 buf_dma);
5464 }
5465 }
5466 }
5467
5468 /* SCSI Port Page 2 - Read the header then the page.
5469 */
5470 header.PageVersion = 0;
5471 header.PageLength = 0;
5472 header.PageNumber = 2;
5473 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5474 cfg.cfghdr.hdr = &header;
5475 cfg.physAddr = -1;
5476 cfg.pageAddr = portnum;
5477 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5478 cfg.dir = 0;
5479 if (mpt_config(ioc, &cfg) != 0)
5480 return -EFAULT;
5481
5482 if (header.PageLength > 0) {
5483 /* Allocate memory and read SCSI Port Page 2
5484 */
5485 pbuf = dma_alloc_coherent(&ioc->pcidev->dev,
5486 header.PageLength * 4, &buf_dma,
5487 GFP_KERNEL);
5488 if (pbuf) {
5489 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5490 cfg.physAddr = buf_dma;
5491 if (mpt_config(ioc, &cfg) != 0) {
5492 /* Nvram data is left with INVALID mark
5493 */
5494 rc = 1;
5495 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5496
5497 /* This is an ATTO adapter, read Page2 accordingly
5498 */
5499 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5500 ATTODeviceInfo_t *pdevice = NULL;
5501 u16 ATTOFlags;
5502
5503 /* Save the Port Page 2 data
5504 * (reformat into a 32bit quantity)
5505 */
5506 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5507 pdevice = &pPP2->DeviceSettings[ii];
5508 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5509 data = 0;
5510
5511 /* Translate ATTO device flags to LSI format
5512 */
5513 if (ATTOFlags & ATTOFLAG_DISC)
5514 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5515 if (ATTOFlags & ATTOFLAG_ID_ENB)
5516 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5517 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5518 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5519 if (ATTOFlags & ATTOFLAG_TAGGED)
5520 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5521 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5522 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5523
5524 data = (data << 16) | (pdevice->Period << 8) | 10;
5525 ioc->spi_data.nvram[ii] = data;
5526 }
5527 } else {
5528 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5529 MpiDeviceInfo_t *pdevice = NULL;
5530
5531 /*
5532 * Save "Set to Avoid SCSI Bus Resets" flag
5533 */
5534 ioc->spi_data.bus_reset =
5535 (le32_to_cpu(pPP2->PortFlags) &
5536 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5537 0 : 1 ;
5538
5539 /* Save the Port Page 2 data
5540 * (reformat into a 32bit quantity)
5541 */
5542 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5543 ioc->spi_data.PortFlags = data;
5544 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5545 pdevice = &pPP2->DeviceSettings[ii];
5546 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5547 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5548 ioc->spi_data.nvram[ii] = data;
5549 }
5550 }
5551
5552 dma_free_coherent(&ioc->pcidev->dev,
5553 header.PageLength * 4, pbuf,
5554 buf_dma);
5555 }
5556 }
5557
5558 /* Update Adapter limits with those from NVRAM
5559 * Comment: Don't need to do this. Target performance
5560 * parameters will never exceed the adapters limits.
5561 */
5562
5563 return rc;
5564}
5565
5566/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5567/**
5568 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5569 * @ioc: Pointer to a Adapter Strucutre
5570 * @portnum: IOC port number
5571 *
5572 * Return: -EFAULT if read of config page header fails
5573 * or 0 if success.
5574 */
5575static int
5576mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5577{
5578 CONFIGPARMS cfg;
5579 ConfigPageHeader_t header;
5580
5581 /* Read the SCSI Device Page 1 header
5582 */
5583 header.PageVersion = 0;
5584 header.PageLength = 0;
5585 header.PageNumber = 1;
5586 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5587 cfg.cfghdr.hdr = &header;
5588 cfg.physAddr = -1;
5589 cfg.pageAddr = portnum;
5590 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5591 cfg.dir = 0;
5592 cfg.timeout = 0;
5593 if (mpt_config(ioc, &cfg) != 0)
5594 return -EFAULT;
5595
5596 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5597 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5598
5599 header.PageVersion = 0;
5600 header.PageLength = 0;
5601 header.PageNumber = 0;
5602 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5603 if (mpt_config(ioc, &cfg) != 0)
5604 return -EFAULT;
5605
5606 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5607 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5608
5609 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5610 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5611
5612 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5613 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5614 return 0;
5615}
5616
5617/**
5618 * mpt_inactive_raid_list_free - This clears this link list.
5619 * @ioc : pointer to per adapter structure
5620 **/
5621static void
5622mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5623{
5624 struct inactive_raid_component_info *component_info, *pNext;
5625
5626 if (list_empty(&ioc->raid_data.inactive_list))
5627 return;
5628
5629 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5630 list_for_each_entry_safe(component_info, pNext,
5631 &ioc->raid_data.inactive_list, list) {
5632 list_del(&component_info->list);
5633 kfree(component_info);
5634 }
5635 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5636}
5637
5638/**
5639 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5640 *
5641 * @ioc : pointer to per adapter structure
5642 * @channel : volume channel
5643 * @id : volume target id
5644 **/
5645static void
5646mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5647{
5648 CONFIGPARMS cfg;
5649 ConfigPageHeader_t hdr;
5650 dma_addr_t dma_handle;
5651 pRaidVolumePage0_t buffer = NULL;
5652 int i;
5653 RaidPhysDiskPage0_t phys_disk;
5654 struct inactive_raid_component_info *component_info;
5655 int handle_inactive_volumes;
5656
5657 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5658 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5659 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5660 cfg.pageAddr = (channel << 8) + id;
5661 cfg.cfghdr.hdr = &hdr;
5662 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5663
5664 if (mpt_config(ioc, &cfg) != 0)
5665 goto out;
5666
5667 if (!hdr.PageLength)
5668 goto out;
5669
5670 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5671 &dma_handle, GFP_KERNEL);
5672
5673 if (!buffer)
5674 goto out;
5675
5676 cfg.physAddr = dma_handle;
5677 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5678
5679 if (mpt_config(ioc, &cfg) != 0)
5680 goto out;
5681
5682 if (!buffer->NumPhysDisks)
5683 goto out;
5684
5685 handle_inactive_volumes =
5686 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5687 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5688 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5689 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5690
5691 if (!handle_inactive_volumes)
5692 goto out;
5693
5694 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5695 for (i = 0; i < buffer->NumPhysDisks; i++) {
5696 if(mpt_raid_phys_disk_pg0(ioc,
5697 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5698 continue;
5699
5700 if ((component_info = kmalloc(sizeof (*component_info),
5701 GFP_KERNEL)) == NULL)
5702 continue;
5703
5704 component_info->volumeID = id;
5705 component_info->volumeBus = channel;
5706 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5707 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5708 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5709 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5710
5711 list_add_tail(&component_info->list,
5712 &ioc->raid_data.inactive_list);
5713 }
5714 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5715
5716 out:
5717 if (buffer)
5718 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5719 buffer, dma_handle);
5720}
5721
5722/**
5723 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5724 * @ioc: Pointer to a Adapter Structure
5725 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5726 * @phys_disk: requested payload data returned
5727 *
5728 * Return:
5729 * 0 on success
5730 * -EFAULT if read of config page header fails or data pointer not NULL
5731 * -ENOMEM if pci_alloc failed
5732 **/
5733int
5734mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5735 RaidPhysDiskPage0_t *phys_disk)
5736{
5737 CONFIGPARMS cfg;
5738 ConfigPageHeader_t hdr;
5739 dma_addr_t dma_handle;
5740 pRaidPhysDiskPage0_t buffer = NULL;
5741 int rc;
5742
5743 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5744 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5745 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5746
5747 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5748 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5749 cfg.cfghdr.hdr = &hdr;
5750 cfg.physAddr = -1;
5751 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5752
5753 if (mpt_config(ioc, &cfg) != 0) {
5754 rc = -EFAULT;
5755 goto out;
5756 }
5757
5758 if (!hdr.PageLength) {
5759 rc = -EFAULT;
5760 goto out;
5761 }
5762
5763 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5764 &dma_handle, GFP_KERNEL);
5765
5766 if (!buffer) {
5767 rc = -ENOMEM;
5768 goto out;
5769 }
5770
5771 cfg.physAddr = dma_handle;
5772 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5773 cfg.pageAddr = phys_disk_num;
5774
5775 if (mpt_config(ioc, &cfg) != 0) {
5776 rc = -EFAULT;
5777 goto out;
5778 }
5779
5780 rc = 0;
5781 memcpy(phys_disk, buffer, sizeof(*buffer));
5782 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5783
5784 out:
5785
5786 if (buffer)
5787 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5788 buffer, dma_handle);
5789
5790 return rc;
5791}
5792
5793/**
5794 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5795 * @ioc: Pointer to a Adapter Structure
5796 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5797 *
5798 * Return:
5799 * returns number paths
5800 **/
5801int
5802mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5803{
5804 CONFIGPARMS cfg;
5805 ConfigPageHeader_t hdr;
5806 dma_addr_t dma_handle;
5807 pRaidPhysDiskPage1_t buffer = NULL;
5808 int rc;
5809
5810 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5811 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5812
5813 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5814 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5815 hdr.PageNumber = 1;
5816 cfg.cfghdr.hdr = &hdr;
5817 cfg.physAddr = -1;
5818 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5819
5820 if (mpt_config(ioc, &cfg) != 0) {
5821 rc = 0;
5822 goto out;
5823 }
5824
5825 if (!hdr.PageLength) {
5826 rc = 0;
5827 goto out;
5828 }
5829
5830 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5831 &dma_handle, GFP_KERNEL);
5832
5833 if (!buffer) {
5834 rc = 0;
5835 goto out;
5836 }
5837
5838 cfg.physAddr = dma_handle;
5839 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5840 cfg.pageAddr = phys_disk_num;
5841
5842 if (mpt_config(ioc, &cfg) != 0) {
5843 rc = 0;
5844 goto out;
5845 }
5846
5847 rc = buffer->NumPhysDiskPaths;
5848 out:
5849
5850 if (buffer)
5851 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5852 buffer, dma_handle);
5853
5854 return rc;
5855}
5856EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5857
5858/**
5859 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5860 * @ioc: Pointer to a Adapter Structure
5861 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5862 * @phys_disk: requested payload data returned
5863 *
5864 * Return:
5865 * 0 on success
5866 * -EFAULT if read of config page header fails or data pointer not NULL
5867 * -ENOMEM if pci_alloc failed
5868 **/
5869int
5870mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5871 RaidPhysDiskPage1_t *phys_disk)
5872{
5873 CONFIGPARMS cfg;
5874 ConfigPageHeader_t hdr;
5875 dma_addr_t dma_handle;
5876 pRaidPhysDiskPage1_t buffer = NULL;
5877 int rc;
5878 int i;
5879 __le64 sas_address;
5880
5881 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5882 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5883 rc = 0;
5884
5885 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5886 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5887 hdr.PageNumber = 1;
5888 cfg.cfghdr.hdr = &hdr;
5889 cfg.physAddr = -1;
5890 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5891
5892 if (mpt_config(ioc, &cfg) != 0) {
5893 rc = -EFAULT;
5894 goto out;
5895 }
5896
5897 if (!hdr.PageLength) {
5898 rc = -EFAULT;
5899 goto out;
5900 }
5901
5902 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5903 &dma_handle, GFP_KERNEL);
5904
5905 if (!buffer) {
5906 rc = -ENOMEM;
5907 goto out;
5908 }
5909
5910 cfg.physAddr = dma_handle;
5911 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5912 cfg.pageAddr = phys_disk_num;
5913
5914 if (mpt_config(ioc, &cfg) != 0) {
5915 rc = -EFAULT;
5916 goto out;
5917 }
5918
5919 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5920 phys_disk->PhysDiskNum = phys_disk_num;
5921 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5922 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5923 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5924 phys_disk->Path[i].OwnerIdentifier =
5925 buffer->Path[i].OwnerIdentifier;
5926 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5927 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5928 sas_address = le64_to_cpu(sas_address);
5929 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5930 memcpy(&sas_address,
5931 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5932 sas_address = le64_to_cpu(sas_address);
5933 memcpy(&phys_disk->Path[i].OwnerWWID,
5934 &sas_address, sizeof(__le64));
5935 }
5936
5937 out:
5938
5939 if (buffer)
5940 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5941 buffer, dma_handle);
5942
5943 return rc;
5944}
5945EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5946
5947
5948/**
5949 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5950 * @ioc: Pointer to a Adapter Strucutre
5951 *
5952 * Return:
5953 * 0 on success
5954 * -EFAULT if read of config page header fails or data pointer not NULL
5955 * -ENOMEM if pci_alloc failed
5956 **/
5957int
5958mpt_findImVolumes(MPT_ADAPTER *ioc)
5959{
5960 IOCPage2_t *pIoc2;
5961 u8 *mem;
5962 dma_addr_t ioc2_dma;
5963 CONFIGPARMS cfg;
5964 ConfigPageHeader_t header;
5965 int rc = 0;
5966 int iocpage2sz;
5967 int i;
5968
5969 if (!ioc->ir_firmware)
5970 return 0;
5971
5972 /* Free the old page
5973 */
5974 kfree(ioc->raid_data.pIocPg2);
5975 ioc->raid_data.pIocPg2 = NULL;
5976 mpt_inactive_raid_list_free(ioc);
5977
5978 /* Read IOCP2 header then the page.
5979 */
5980 header.PageVersion = 0;
5981 header.PageLength = 0;
5982 header.PageNumber = 2;
5983 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5984 cfg.cfghdr.hdr = &header;
5985 cfg.physAddr = -1;
5986 cfg.pageAddr = 0;
5987 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5988 cfg.dir = 0;
5989 cfg.timeout = 0;
5990 if (mpt_config(ioc, &cfg) != 0)
5991 return -EFAULT;
5992
5993 if (header.PageLength == 0)
5994 return -EFAULT;
5995
5996 iocpage2sz = header.PageLength * 4;
5997 pIoc2 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage2sz, &ioc2_dma,
5998 GFP_KERNEL);
5999 if (!pIoc2)
6000 return -ENOMEM;
6001
6002 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6003 cfg.physAddr = ioc2_dma;
6004 if (mpt_config(ioc, &cfg) != 0)
6005 goto out;
6006
6007 mem = kmemdup(pIoc2, iocpage2sz, GFP_KERNEL);
6008 if (!mem) {
6009 rc = -ENOMEM;
6010 goto out;
6011 }
6012
6013 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6014
6015 mpt_read_ioc_pg_3(ioc);
6016
6017 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6018 mpt_inactive_raid_volumes(ioc,
6019 pIoc2->RaidVolume[i].VolumeBus,
6020 pIoc2->RaidVolume[i].VolumeID);
6021
6022 out:
6023 dma_free_coherent(&ioc->pcidev->dev, iocpage2sz, pIoc2, ioc2_dma);
6024
6025 return rc;
6026}
6027
6028static int
6029mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6030{
6031 IOCPage3_t *pIoc3;
6032 u8 *mem;
6033 CONFIGPARMS cfg;
6034 ConfigPageHeader_t header;
6035 dma_addr_t ioc3_dma;
6036 int iocpage3sz = 0;
6037
6038 /* Free the old page
6039 */
6040 kfree(ioc->raid_data.pIocPg3);
6041 ioc->raid_data.pIocPg3 = NULL;
6042
6043 /* There is at least one physical disk.
6044 * Read and save IOC Page 3
6045 */
6046 header.PageVersion = 0;
6047 header.PageLength = 0;
6048 header.PageNumber = 3;
6049 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6050 cfg.cfghdr.hdr = &header;
6051 cfg.physAddr = -1;
6052 cfg.pageAddr = 0;
6053 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6054 cfg.dir = 0;
6055 cfg.timeout = 0;
6056 if (mpt_config(ioc, &cfg) != 0)
6057 return 0;
6058
6059 if (header.PageLength == 0)
6060 return 0;
6061
6062 /* Read Header good, alloc memory
6063 */
6064 iocpage3sz = header.PageLength * 4;
6065 pIoc3 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage3sz, &ioc3_dma,
6066 GFP_KERNEL);
6067 if (!pIoc3)
6068 return 0;
6069
6070 /* Read the Page and save the data
6071 * into malloc'd memory.
6072 */
6073 cfg.physAddr = ioc3_dma;
6074 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6075 if (mpt_config(ioc, &cfg) == 0) {
6076 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6077 if (mem) {
6078 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6079 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6080 }
6081 }
6082
6083 dma_free_coherent(&ioc->pcidev->dev, iocpage3sz, pIoc3, ioc3_dma);
6084
6085 return 0;
6086}
6087
6088static void
6089mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6090{
6091 IOCPage4_t *pIoc4;
6092 CONFIGPARMS cfg;
6093 ConfigPageHeader_t header;
6094 dma_addr_t ioc4_dma;
6095 int iocpage4sz;
6096
6097 /* Read and save IOC Page 4
6098 */
6099 header.PageVersion = 0;
6100 header.PageLength = 0;
6101 header.PageNumber = 4;
6102 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6103 cfg.cfghdr.hdr = &header;
6104 cfg.physAddr = -1;
6105 cfg.pageAddr = 0;
6106 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6107 cfg.dir = 0;
6108 cfg.timeout = 0;
6109 if (mpt_config(ioc, &cfg) != 0)
6110 return;
6111
6112 if (header.PageLength == 0)
6113 return;
6114
6115 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6116 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6117 pIoc4 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage4sz,
6118 &ioc4_dma, GFP_KERNEL);
6119 if (!pIoc4)
6120 return;
6121 ioc->alloc_total += iocpage4sz;
6122 } else {
6123 ioc4_dma = ioc->spi_data.IocPg4_dma;
6124 iocpage4sz = ioc->spi_data.IocPg4Sz;
6125 }
6126
6127 /* Read the Page into dma memory.
6128 */
6129 cfg.physAddr = ioc4_dma;
6130 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6131 if (mpt_config(ioc, &cfg) == 0) {
6132 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6133 ioc->spi_data.IocPg4_dma = ioc4_dma;
6134 ioc->spi_data.IocPg4Sz = iocpage4sz;
6135 } else {
6136 dma_free_coherent(&ioc->pcidev->dev, iocpage4sz, pIoc4,
6137 ioc4_dma);
6138 ioc->spi_data.pIocPg4 = NULL;
6139 ioc->alloc_total -= iocpage4sz;
6140 }
6141}
6142
6143static void
6144mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6145{
6146 IOCPage1_t *pIoc1;
6147 CONFIGPARMS cfg;
6148 ConfigPageHeader_t header;
6149 dma_addr_t ioc1_dma;
6150 int iocpage1sz = 0;
6151 u32 tmp;
6152
6153 /* Check the Coalescing Timeout in IOC Page 1
6154 */
6155 header.PageVersion = 0;
6156 header.PageLength = 0;
6157 header.PageNumber = 1;
6158 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6159 cfg.cfghdr.hdr = &header;
6160 cfg.physAddr = -1;
6161 cfg.pageAddr = 0;
6162 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6163 cfg.dir = 0;
6164 cfg.timeout = 0;
6165 if (mpt_config(ioc, &cfg) != 0)
6166 return;
6167
6168 if (header.PageLength == 0)
6169 return;
6170
6171 /* Read Header good, alloc memory
6172 */
6173 iocpage1sz = header.PageLength * 4;
6174 pIoc1 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage1sz, &ioc1_dma,
6175 GFP_KERNEL);
6176 if (!pIoc1)
6177 return;
6178
6179 /* Read the Page and check coalescing timeout
6180 */
6181 cfg.physAddr = ioc1_dma;
6182 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6183 if (mpt_config(ioc, &cfg) == 0) {
6184
6185 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6186 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6187 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6188
6189 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6190 ioc->name, tmp));
6191
6192 if (tmp > MPT_COALESCING_TIMEOUT) {
6193 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6194
6195 /* Write NVRAM and current
6196 */
6197 cfg.dir = 1;
6198 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6199 if (mpt_config(ioc, &cfg) == 0) {
6200 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6201 ioc->name, MPT_COALESCING_TIMEOUT));
6202
6203 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6204 if (mpt_config(ioc, &cfg) == 0) {
6205 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6206 "Reset NVRAM Coalescing Timeout to = %d\n",
6207 ioc->name, MPT_COALESCING_TIMEOUT));
6208 } else {
6209 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6210 "Reset NVRAM Coalescing Timeout Failed\n",
6211 ioc->name));
6212 }
6213
6214 } else {
6215 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6216 "Reset of Current Coalescing Timeout Failed!\n",
6217 ioc->name));
6218 }
6219 }
6220
6221 } else {
6222 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6223 }
6224 }
6225
6226 dma_free_coherent(&ioc->pcidev->dev, iocpage1sz, pIoc1, ioc1_dma);
6227
6228 return;
6229}
6230
6231static void
6232mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6233{
6234 CONFIGPARMS cfg;
6235 ConfigPageHeader_t hdr;
6236 dma_addr_t buf_dma;
6237 ManufacturingPage0_t *pbuf = NULL;
6238
6239 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6240 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6241
6242 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6243 cfg.cfghdr.hdr = &hdr;
6244 cfg.physAddr = -1;
6245 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6246 cfg.timeout = 10;
6247
6248 if (mpt_config(ioc, &cfg) != 0)
6249 goto out;
6250
6251 if (!cfg.cfghdr.hdr->PageLength)
6252 goto out;
6253
6254 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6255 pbuf = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
6256 &buf_dma, GFP_KERNEL);
6257 if (!pbuf)
6258 goto out;
6259
6260 cfg.physAddr = buf_dma;
6261
6262 if (mpt_config(ioc, &cfg) != 0)
6263 goto out;
6264
6265 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6266 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6267 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6268
6269out:
6270
6271 if (pbuf)
6272 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, pbuf,
6273 buf_dma);
6274}
6275
6276/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6277/**
6278 * SendEventNotification - Send EventNotification (on or off) request to adapter
6279 * @ioc: Pointer to MPT_ADAPTER structure
6280 * @EvSwitch: Event switch flags
6281 * @sleepFlag: Specifies whether the process can sleep
6282 */
6283static int
6284SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6285{
6286 EventNotification_t evn;
6287 MPIDefaultReply_t reply_buf;
6288
6289 memset(&evn, 0, sizeof(EventNotification_t));
6290 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6291
6292 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6293 evn.Switch = EvSwitch;
6294 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6295
6296 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6297 "Sending EventNotification (%d) request %p\n",
6298 ioc->name, EvSwitch, &evn));
6299
6300 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6301 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6302 sleepFlag);
6303}
6304
6305/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6306/**
6307 * SendEventAck - Send EventAck request to MPT adapter.
6308 * @ioc: Pointer to MPT_ADAPTER structure
6309 * @evnp: Pointer to original EventNotification request
6310 */
6311static int
6312SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6313{
6314 EventAck_t *pAck;
6315
6316 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6317 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6318 ioc->name, __func__));
6319 return -1;
6320 }
6321
6322 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6323
6324 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6325 pAck->ChainOffset = 0;
6326 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6327 pAck->MsgFlags = 0;
6328 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6329 pAck->Event = evnp->Event;
6330 pAck->EventContext = evnp->EventContext;
6331
6332 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6333
6334 return 0;
6335}
6336
6337/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6338/**
6339 * mpt_config - Generic function to issue config message
6340 * @ioc: Pointer to an adapter structure
6341 * @pCfg: Pointer to a configuration structure. Struct contains
6342 * action, page address, direction, physical address
6343 * and pointer to a configuration page header
6344 * Page header is updated.
6345 *
6346 * Returns 0 for success
6347 * -EAGAIN if no msg frames currently available
6348 * -EFAULT for non-successful reply or no reply (timeout)
6349 */
6350int
6351mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6352{
6353 Config_t *pReq;
6354 ConfigReply_t *pReply;
6355 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6356 MPT_FRAME_HDR *mf;
6357 int ii;
6358 int flagsLength;
6359 long timeout;
6360 int ret;
6361 u8 page_type = 0, extend_page;
6362 unsigned long timeleft;
6363 unsigned long flags;
6364 u8 issue_hard_reset = 0;
6365 u8 retry_count = 0;
6366
6367 might_sleep();
6368
6369 /* don't send a config page during diag reset */
6370 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6371 if (ioc->ioc_reset_in_progress) {
6372 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6373 "%s: busy with host reset\n", ioc->name, __func__));
6374 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6375 return -EBUSY;
6376 }
6377 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6378
6379 /* don't send if no chance of success */
6380 if (!ioc->active ||
6381 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6382 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6383 "%s: ioc not operational, %d, %xh\n",
6384 ioc->name, __func__, ioc->active,
6385 mpt_GetIocState(ioc, 0)));
6386 return -EFAULT;
6387 }
6388
6389 retry_config:
6390 mutex_lock(&ioc->mptbase_cmds.mutex);
6391 /* init the internal cmd struct */
6392 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6393 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6394
6395 /* Get and Populate a free Frame
6396 */
6397 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6398 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6399 "mpt_config: no msg frames!\n", ioc->name));
6400 ret = -EAGAIN;
6401 goto out;
6402 }
6403
6404 pReq = (Config_t *)mf;
6405 pReq->Action = pCfg->action;
6406 pReq->Reserved = 0;
6407 pReq->ChainOffset = 0;
6408 pReq->Function = MPI_FUNCTION_CONFIG;
6409
6410 /* Assume page type is not extended and clear "reserved" fields. */
6411 pReq->ExtPageLength = 0;
6412 pReq->ExtPageType = 0;
6413 pReq->MsgFlags = 0;
6414
6415 for (ii=0; ii < 8; ii++)
6416 pReq->Reserved2[ii] = 0;
6417
6418 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6419 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6420 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6421 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6422
6423 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6424 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6425 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6426 pReq->ExtPageType = pExtHdr->ExtPageType;
6427 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6428
6429 /* Page Length must be treated as a reserved field for the
6430 * extended header.
6431 */
6432 pReq->Header.PageLength = 0;
6433 }
6434
6435 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6436
6437 /* Add a SGE to the config request.
6438 */
6439 if (pCfg->dir)
6440 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6441 else
6442 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6443
6444 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6445 MPI_CONFIG_PAGETYPE_EXTENDED) {
6446 flagsLength |= pExtHdr->ExtPageLength * 4;
6447 page_type = pReq->ExtPageType;
6448 extend_page = 1;
6449 } else {
6450 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6451 page_type = pReq->Header.PageType;
6452 extend_page = 0;
6453 }
6454
6455 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6456 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6457 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6458
6459 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6460 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6461 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6462 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6463 timeout);
6464 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6465 ret = -ETIME;
6466 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6467 "Failed Sending Config request type 0x%x, page 0x%x,"
6468 " action %d, status %xh, time left %ld\n\n",
6469 ioc->name, page_type, pReq->Header.PageNumber,
6470 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6471 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6472 goto out;
6473 if (!timeleft) {
6474 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6475 if (ioc->ioc_reset_in_progress) {
6476 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6477 flags);
6478 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6479 " progress mpt_config timed out.!!\n",
6480 __func__, ioc->name);
6481 mutex_unlock(&ioc->mptbase_cmds.mutex);
6482 return -EFAULT;
6483 }
6484 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6485 issue_hard_reset = 1;
6486 }
6487 goto out;
6488 }
6489
6490 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6491 ret = -1;
6492 goto out;
6493 }
6494 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6495 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6496 if (ret == MPI_IOCSTATUS_SUCCESS) {
6497 if (extend_page) {
6498 pCfg->cfghdr.ehdr->ExtPageLength =
6499 le16_to_cpu(pReply->ExtPageLength);
6500 pCfg->cfghdr.ehdr->ExtPageType =
6501 pReply->ExtPageType;
6502 }
6503 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6504 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6505 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6506 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6507
6508 }
6509
6510 if (retry_count)
6511 printk(MYIOC_s_INFO_FMT "Retry completed "
6512 "ret=0x%x timeleft=%ld\n",
6513 ioc->name, ret, timeleft);
6514
6515 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6516 ret, le32_to_cpu(pReply->IOCLogInfo)));
6517
6518out:
6519
6520 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6521 mutex_unlock(&ioc->mptbase_cmds.mutex);
6522 if (issue_hard_reset) {
6523 issue_hard_reset = 0;
6524 printk(MYIOC_s_WARN_FMT
6525 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6526 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6527 if (retry_count == 0) {
6528 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6529 retry_count++;
6530 } else
6531 mpt_HardResetHandler(ioc, CAN_SLEEP);
6532
6533 mpt_free_msg_frame(ioc, mf);
6534 /* attempt one retry for a timed out command */
6535 if (retry_count < 2) {
6536 printk(MYIOC_s_INFO_FMT
6537 "Attempting Retry Config request"
6538 " type 0x%x, page 0x%x,"
6539 " action %d\n", ioc->name, page_type,
6540 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6541 retry_count++;
6542 goto retry_config;
6543 }
6544 }
6545 return ret;
6546
6547}
6548
6549/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6550/**
6551 * mpt_ioc_reset - Base cleanup for hard reset
6552 * @ioc: Pointer to the adapter structure
6553 * @reset_phase: Indicates pre- or post-reset functionality
6554 *
6555 * Remark: Frees resources with internally generated commands.
6556 */
6557static int
6558mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6559{
6560 switch (reset_phase) {
6561 case MPT_IOC_SETUP_RESET:
6562 ioc->taskmgmt_quiesce_io = 1;
6563 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6564 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6565 break;
6566 case MPT_IOC_PRE_RESET:
6567 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6568 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6569 break;
6570 case MPT_IOC_POST_RESET:
6571 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6572 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6573/* wake up mptbase_cmds */
6574 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6575 ioc->mptbase_cmds.status |=
6576 MPT_MGMT_STATUS_DID_IOCRESET;
6577 complete(&ioc->mptbase_cmds.done);
6578 }
6579/* wake up taskmgmt_cmds */
6580 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6581 ioc->taskmgmt_cmds.status |=
6582 MPT_MGMT_STATUS_DID_IOCRESET;
6583 complete(&ioc->taskmgmt_cmds.done);
6584 }
6585 break;
6586 default:
6587 break;
6588 }
6589
6590 return 1; /* currently means nothing really */
6591}
6592
6593
6594#ifdef CONFIG_PROC_FS /* { */
6595/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6596/*
6597 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6598 */
6599/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6600/**
6601 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6602 *
6603 * Returns 0 for success, non-zero for failure.
6604 */
6605static int
6606procmpt_create(void)
6607{
6608 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6609 if (mpt_proc_root_dir == NULL)
6610 return -ENOTDIR;
6611
6612 proc_create_single("summary", S_IRUGO, mpt_proc_root_dir,
6613 mpt_summary_proc_show);
6614 proc_create_single("version", S_IRUGO, mpt_proc_root_dir,
6615 mpt_version_proc_show);
6616 return 0;
6617}
6618
6619/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6620/**
6621 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6622 *
6623 * Returns 0 for success, non-zero for failure.
6624 */
6625static void
6626procmpt_destroy(void)
6627{
6628 remove_proc_entry("version", mpt_proc_root_dir);
6629 remove_proc_entry("summary", mpt_proc_root_dir);
6630 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6631}
6632
6633/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6634/*
6635 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6636 */
6637static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6638
6639static int mpt_summary_proc_show(struct seq_file *m, void *v)
6640{
6641 MPT_ADAPTER *ioc = m->private;
6642
6643 if (ioc) {
6644 seq_mpt_print_ioc_summary(ioc, m, 1);
6645 } else {
6646 list_for_each_entry(ioc, &ioc_list, list) {
6647 seq_mpt_print_ioc_summary(ioc, m, 1);
6648 }
6649 }
6650
6651 return 0;
6652}
6653
6654static int mpt_version_proc_show(struct seq_file *m, void *v)
6655{
6656 u8 cb_idx;
6657 int scsi, fc, sas, lan, ctl, targ;
6658 char *drvname;
6659
6660 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6661 seq_printf(m, " Fusion MPT base driver\n");
6662
6663 scsi = fc = sas = lan = ctl = targ = 0;
6664 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6665 drvname = NULL;
6666 if (MptCallbacks[cb_idx]) {
6667 switch (MptDriverClass[cb_idx]) {
6668 case MPTSPI_DRIVER:
6669 if (!scsi++) drvname = "SPI host";
6670 break;
6671 case MPTFC_DRIVER:
6672 if (!fc++) drvname = "FC host";
6673 break;
6674 case MPTSAS_DRIVER:
6675 if (!sas++) drvname = "SAS host";
6676 break;
6677 case MPTLAN_DRIVER:
6678 if (!lan++) drvname = "LAN";
6679 break;
6680 case MPTSTM_DRIVER:
6681 if (!targ++) drvname = "SCSI target";
6682 break;
6683 case MPTCTL_DRIVER:
6684 if (!ctl++) drvname = "ioctl";
6685 break;
6686 }
6687
6688 if (drvname)
6689 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6690 }
6691 }
6692
6693 return 0;
6694}
6695
6696static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6697{
6698 MPT_ADAPTER *ioc = m->private;
6699 char expVer[32];
6700 int sz;
6701 int p;
6702
6703 mpt_get_fw_exp_ver(expVer, ioc);
6704
6705 seq_printf(m, "%s:", ioc->name);
6706 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6707 seq_printf(m, " (f/w download boot flag set)");
6708// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6709// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6710
6711 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6712 ioc->facts.ProductID,
6713 ioc->prod_name);
6714 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6715 if (ioc->facts.FWImageSize)
6716 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6717 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6718 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6719 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6720
6721 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6722 ioc->facts.CurrentHostMfaHighAddr);
6723 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6724 ioc->facts.CurrentSenseBufferHighAddr);
6725
6726 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6727 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6728
6729 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6730 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6731 /*
6732 * Rounding UP to nearest 4-kB boundary here...
6733 */
6734 sz = (ioc->req_sz * ioc->req_depth) + 128;
6735 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6736 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6737 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6738 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6739 4*ioc->facts.RequestFrameSize,
6740 ioc->facts.GlobalCredits);
6741
6742 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6743 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6744 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6745 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6746 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6747 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6748 ioc->facts.CurReplyFrameSize,
6749 ioc->facts.ReplyQueueDepth);
6750
6751 seq_printf(m, " MaxDevices = %d\n",
6752 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6753 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6754
6755 /* per-port info */
6756 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6757 seq_printf(m, " PortNumber = %d (of %d)\n",
6758 p+1,
6759 ioc->facts.NumberOfPorts);
6760 if (ioc->bus_type == FC) {
6761 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6762 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6763 seq_printf(m, " LanAddr = %pMR\n", a);
6764 }
6765 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6766 ioc->fc_port_page0[p].WWNN.High,
6767 ioc->fc_port_page0[p].WWNN.Low,
6768 ioc->fc_port_page0[p].WWPN.High,
6769 ioc->fc_port_page0[p].WWPN.Low);
6770 }
6771 }
6772
6773 return 0;
6774}
6775#endif /* CONFIG_PROC_FS } */
6776
6777/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6778static void
6779mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6780{
6781 buf[0] ='\0';
6782 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6783 sprintf(buf, " (Exp %02d%02d)",
6784 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6785 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6786
6787 /* insider hack! */
6788 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6789 strcat(buf, " [MDBG]");
6790 }
6791}
6792
6793/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6794/**
6795 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6796 * @ioc: Pointer to MPT_ADAPTER structure
6797 * @buffer: Pointer to buffer where IOC summary info should be written
6798 * @size: Pointer to number of bytes we wrote (set by this routine)
6799 * @len: Offset at which to start writing in buffer
6800 * @showlan: Display LAN stuff?
6801 *
6802 * This routine writes (english readable) ASCII text, which represents
6803 * a summary of IOC information, to a buffer.
6804 */
6805void
6806mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6807{
6808 char expVer[32];
6809 int y;
6810
6811 mpt_get_fw_exp_ver(expVer, ioc);
6812
6813 /*
6814 * Shorter summary of attached ioc's...
6815 */
6816 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6817 ioc->name,
6818 ioc->prod_name,
6819 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6820 ioc->facts.FWVersion.Word,
6821 expVer,
6822 ioc->facts.NumberOfPorts,
6823 ioc->req_depth);
6824
6825 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6826 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6827 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a);
6828 }
6829
6830 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6831
6832 if (!ioc->active)
6833 y += sprintf(buffer+len+y, " (disabled)");
6834
6835 y += sprintf(buffer+len+y, "\n");
6836
6837 *size = y;
6838}
6839
6840#ifdef CONFIG_PROC_FS
6841static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6842{
6843 char expVer[32];
6844
6845 mpt_get_fw_exp_ver(expVer, ioc);
6846
6847 /*
6848 * Shorter summary of attached ioc's...
6849 */
6850 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6851 ioc->name,
6852 ioc->prod_name,
6853 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6854 ioc->facts.FWVersion.Word,
6855 expVer,
6856 ioc->facts.NumberOfPorts,
6857 ioc->req_depth);
6858
6859 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6860 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6861 seq_printf(m, ", LanAddr=%pMR", a);
6862 }
6863
6864 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6865
6866 if (!ioc->active)
6867 seq_printf(m, " (disabled)");
6868
6869 seq_putc(m, '\n');
6870}
6871#endif
6872
6873/**
6874 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6875 * @ioc: Pointer to MPT_ADAPTER structure
6876 *
6877 * Returns 0 for SUCCESS or -1 if FAILED.
6878 *
6879 * If -1 is return, then it was not possible to set the flags
6880 **/
6881int
6882mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6883{
6884 unsigned long flags;
6885 int retval;
6886
6887 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6888 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6889 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6890 retval = -1;
6891 goto out;
6892 }
6893 retval = 0;
6894 ioc->taskmgmt_in_progress = 1;
6895 ioc->taskmgmt_quiesce_io = 1;
6896 if (ioc->alt_ioc) {
6897 ioc->alt_ioc->taskmgmt_in_progress = 1;
6898 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6899 }
6900 out:
6901 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6902 return retval;
6903}
6904EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6905
6906/**
6907 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6908 * @ioc: Pointer to MPT_ADAPTER structure
6909 *
6910 **/
6911void
6912mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6913{
6914 unsigned long flags;
6915
6916 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6917 ioc->taskmgmt_in_progress = 0;
6918 ioc->taskmgmt_quiesce_io = 0;
6919 if (ioc->alt_ioc) {
6920 ioc->alt_ioc->taskmgmt_in_progress = 0;
6921 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6922 }
6923 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6924}
6925EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6926
6927
6928/**
6929 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6930 * the kernel
6931 * @ioc: Pointer to MPT_ADAPTER structure
6932 *
6933 **/
6934void __noreturn
6935mpt_halt_firmware(MPT_ADAPTER *ioc)
6936{
6937 u32 ioc_raw_state;
6938
6939 ioc_raw_state = mpt_GetIocState(ioc, 0);
6940
6941 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6942 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6943 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6944 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6945 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6946 } else {
6947 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6948 panic("%s: Firmware is halted due to command timeout\n",
6949 ioc->name);
6950 }
6951}
6952EXPORT_SYMBOL(mpt_halt_firmware);
6953
6954/**
6955 * mpt_SoftResetHandler - Issues a less expensive reset
6956 * @ioc: Pointer to MPT_ADAPTER structure
6957 * @sleepFlag: Indicates if sleep or schedule must be called.
6958 *
6959 * Returns 0 for SUCCESS or -1 if FAILED.
6960 *
6961 * Message Unit Reset - instructs the IOC to reset the Reply Post and
6962 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
6963 * All posted buffers are freed, and event notification is turned off.
6964 * IOC doesn't reply to any outstanding request. This will transfer IOC
6965 * to READY state.
6966 **/
6967static int
6968mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
6969{
6970 int rc;
6971 int ii;
6972 u8 cb_idx;
6973 unsigned long flags;
6974 u32 ioc_state;
6975 unsigned long time_count;
6976
6977 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
6978 ioc->name));
6979
6980 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
6981
6982 if (mpt_fwfault_debug)
6983 mpt_halt_firmware(ioc);
6984
6985 if (ioc_state == MPI_IOC_STATE_FAULT ||
6986 ioc_state == MPI_IOC_STATE_RESET) {
6987 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6988 "skipping, either in FAULT or RESET state!\n", ioc->name));
6989 return -1;
6990 }
6991
6992 if (ioc->bus_type == FC) {
6993 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6994 "skipping, because the bus type is FC!\n", ioc->name));
6995 return -1;
6996 }
6997
6998 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6999 if (ioc->ioc_reset_in_progress) {
7000 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7001 return -1;
7002 }
7003 ioc->ioc_reset_in_progress = 1;
7004 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7005
7006 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7007 if (MptResetHandlers[cb_idx])
7008 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7009 }
7010
7011 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7012 if (ioc->taskmgmt_in_progress) {
7013 ioc->ioc_reset_in_progress = 0;
7014 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7015 return -1;
7016 }
7017 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7018 /* Disable reply interrupts (also blocks FreeQ) */
7019 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7020 ioc->active = 0;
7021 time_count = jiffies;
7022
7023 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7024
7025 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7026 if (MptResetHandlers[cb_idx])
7027 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7028 }
7029
7030 if (rc)
7031 goto out;
7032
7033 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7034 if (ioc_state != MPI_IOC_STATE_READY)
7035 goto out;
7036
7037 for (ii = 0; ii < 5; ii++) {
7038 /* Get IOC facts! Allow 5 retries */
7039 rc = GetIocFacts(ioc, sleepFlag,
7040 MPT_HOSTEVENT_IOC_RECOVER);
7041 if (rc == 0)
7042 break;
7043 if (sleepFlag == CAN_SLEEP)
7044 msleep(100);
7045 else
7046 mdelay(100);
7047 }
7048 if (ii == 5)
7049 goto out;
7050
7051 rc = PrimeIocFifos(ioc);
7052 if (rc != 0)
7053 goto out;
7054
7055 rc = SendIocInit(ioc, sleepFlag);
7056 if (rc != 0)
7057 goto out;
7058
7059 rc = SendEventNotification(ioc, 1, sleepFlag);
7060 if (rc != 0)
7061 goto out;
7062
7063 if (ioc->hard_resets < -1)
7064 ioc->hard_resets++;
7065
7066 /*
7067 * At this point, we know soft reset succeeded.
7068 */
7069
7070 ioc->active = 1;
7071 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7072
7073 out:
7074 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7075 ioc->ioc_reset_in_progress = 0;
7076 ioc->taskmgmt_quiesce_io = 0;
7077 ioc->taskmgmt_in_progress = 0;
7078 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7079
7080 if (ioc->active) { /* otherwise, hard reset coming */
7081 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7082 if (MptResetHandlers[cb_idx])
7083 mpt_signal_reset(cb_idx, ioc,
7084 MPT_IOC_POST_RESET);
7085 }
7086 }
7087
7088 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7089 "SoftResetHandler: completed (%d seconds): %s\n",
7090 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7091 ((rc == 0) ? "SUCCESS" : "FAILED")));
7092
7093 return rc;
7094}
7095
7096/**
7097 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7098 * @ioc: Pointer to MPT_ADAPTER structure
7099 * @sleepFlag: Indicates if sleep or schedule must be called.
7100 *
7101 * Returns 0 for SUCCESS or -1 if FAILED.
7102 * Try for softreset first, only if it fails go for expensive
7103 * HardReset.
7104 **/
7105int
7106mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7107 int ret = -1;
7108
7109 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7110 if (ret == 0)
7111 return ret;
7112 ret = mpt_HardResetHandler(ioc, sleepFlag);
7113 return ret;
7114}
7115EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7116
7117/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7118/*
7119 * Reset Handling
7120 */
7121/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7122/**
7123 * mpt_HardResetHandler - Generic reset handler
7124 * @ioc: Pointer to MPT_ADAPTER structure
7125 * @sleepFlag: Indicates if sleep or schedule must be called.
7126 *
7127 * Issues SCSI Task Management call based on input arg values.
7128 * If TaskMgmt fails, returns associated SCSI request.
7129 *
7130 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7131 * or a non-interrupt thread. In the former, must not call schedule().
7132 *
7133 * Note: A return of -1 is a FATAL error case, as it means a
7134 * FW reload/initialization failed.
7135 *
7136 * Returns 0 for SUCCESS or -1 if FAILED.
7137 */
7138int
7139mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7140{
7141 int rc;
7142 u8 cb_idx;
7143 unsigned long flags;
7144 unsigned long time_count;
7145
7146 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7147#ifdef MFCNT
7148 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7149 printk("MF count 0x%x !\n", ioc->mfcnt);
7150#endif
7151 if (mpt_fwfault_debug)
7152 mpt_halt_firmware(ioc);
7153
7154 /* Reset the adapter. Prevent more than 1 call to
7155 * mpt_do_ioc_recovery at any instant in time.
7156 */
7157 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7158 if (ioc->ioc_reset_in_progress) {
7159 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7160 ioc->wait_on_reset_completion = 1;
7161 do {
7162 ssleep(1);
7163 } while (ioc->ioc_reset_in_progress == 1);
7164 ioc->wait_on_reset_completion = 0;
7165 return ioc->reset_status;
7166 }
7167 if (ioc->wait_on_reset_completion) {
7168 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7169 rc = 0;
7170 time_count = jiffies;
7171 goto exit;
7172 }
7173 ioc->ioc_reset_in_progress = 1;
7174 if (ioc->alt_ioc)
7175 ioc->alt_ioc->ioc_reset_in_progress = 1;
7176 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7177
7178
7179 /* The SCSI driver needs to adjust timeouts on all current
7180 * commands prior to the diagnostic reset being issued.
7181 * Prevents timeouts occurring during a diagnostic reset...very bad.
7182 * For all other protocol drivers, this is a no-op.
7183 */
7184 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7185 if (MptResetHandlers[cb_idx]) {
7186 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7187 if (ioc->alt_ioc)
7188 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7189 MPT_IOC_SETUP_RESET);
7190 }
7191 }
7192
7193 time_count = jiffies;
7194 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7195 if (rc != 0) {
7196 printk(KERN_WARNING MYNAM
7197 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7198 rc, ioc->name, mpt_GetIocState(ioc, 0));
7199 } else {
7200 if (ioc->hard_resets < -1)
7201 ioc->hard_resets++;
7202 }
7203
7204 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7205 ioc->ioc_reset_in_progress = 0;
7206 ioc->taskmgmt_quiesce_io = 0;
7207 ioc->taskmgmt_in_progress = 0;
7208 ioc->reset_status = rc;
7209 if (ioc->alt_ioc) {
7210 ioc->alt_ioc->ioc_reset_in_progress = 0;
7211 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7212 ioc->alt_ioc->taskmgmt_in_progress = 0;
7213 }
7214 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7215
7216 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7217 if (MptResetHandlers[cb_idx]) {
7218 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7219 if (ioc->alt_ioc)
7220 mpt_signal_reset(cb_idx,
7221 ioc->alt_ioc, MPT_IOC_POST_RESET);
7222 }
7223 }
7224exit:
7225 dtmprintk(ioc,
7226 printk(MYIOC_s_DEBUG_FMT
7227 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7228 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7229 "SUCCESS" : "FAILED")));
7230
7231 return rc;
7232}
7233
7234#ifdef CONFIG_FUSION_LOGGING
7235static void
7236mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7237{
7238 char *ds = NULL;
7239 u32 evData0;
7240 int ii;
7241 u8 event;
7242 char *evStr = ioc->evStr;
7243
7244 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7245 evData0 = le32_to_cpu(pEventReply->Data[0]);
7246
7247 switch(event) {
7248 case MPI_EVENT_NONE:
7249 ds = "None";
7250 break;
7251 case MPI_EVENT_LOG_DATA:
7252 ds = "Log Data";
7253 break;
7254 case MPI_EVENT_STATE_CHANGE:
7255 ds = "State Change";
7256 break;
7257 case MPI_EVENT_UNIT_ATTENTION:
7258 ds = "Unit Attention";
7259 break;
7260 case MPI_EVENT_IOC_BUS_RESET:
7261 ds = "IOC Bus Reset";
7262 break;
7263 case MPI_EVENT_EXT_BUS_RESET:
7264 ds = "External Bus Reset";
7265 break;
7266 case MPI_EVENT_RESCAN:
7267 ds = "Bus Rescan Event";
7268 break;
7269 case MPI_EVENT_LINK_STATUS_CHANGE:
7270 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7271 ds = "Link Status(FAILURE) Change";
7272 else
7273 ds = "Link Status(ACTIVE) Change";
7274 break;
7275 case MPI_EVENT_LOOP_STATE_CHANGE:
7276 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7277 ds = "Loop State(LIP) Change";
7278 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7279 ds = "Loop State(LPE) Change";
7280 else
7281 ds = "Loop State(LPB) Change";
7282 break;
7283 case MPI_EVENT_LOGOUT:
7284 ds = "Logout";
7285 break;
7286 case MPI_EVENT_EVENT_CHANGE:
7287 if (evData0)
7288 ds = "Events ON";
7289 else
7290 ds = "Events OFF";
7291 break;
7292 case MPI_EVENT_INTEGRATED_RAID:
7293 {
7294 u8 ReasonCode = (u8)(evData0 >> 16);
7295 switch (ReasonCode) {
7296 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7297 ds = "Integrated Raid: Volume Created";
7298 break;
7299 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7300 ds = "Integrated Raid: Volume Deleted";
7301 break;
7302 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7303 ds = "Integrated Raid: Volume Settings Changed";
7304 break;
7305 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7306 ds = "Integrated Raid: Volume Status Changed";
7307 break;
7308 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7309 ds = "Integrated Raid: Volume Physdisk Changed";
7310 break;
7311 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7312 ds = "Integrated Raid: Physdisk Created";
7313 break;
7314 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7315 ds = "Integrated Raid: Physdisk Deleted";
7316 break;
7317 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7318 ds = "Integrated Raid: Physdisk Settings Changed";
7319 break;
7320 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7321 ds = "Integrated Raid: Physdisk Status Changed";
7322 break;
7323 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7324 ds = "Integrated Raid: Domain Validation Needed";
7325 break;
7326 case MPI_EVENT_RAID_RC_SMART_DATA :
7327 ds = "Integrated Raid; Smart Data";
7328 break;
7329 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7330 ds = "Integrated Raid: Replace Action Started";
7331 break;
7332 default:
7333 ds = "Integrated Raid";
7334 break;
7335 }
7336 break;
7337 }
7338 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7339 ds = "SCSI Device Status Change";
7340 break;
7341 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7342 {
7343 u8 id = (u8)(evData0);
7344 u8 channel = (u8)(evData0 >> 8);
7345 u8 ReasonCode = (u8)(evData0 >> 16);
7346 switch (ReasonCode) {
7347 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7348 snprintf(evStr, EVENT_DESCR_STR_SZ,
7349 "SAS Device Status Change: Added: "
7350 "id=%d channel=%d", id, channel);
7351 break;
7352 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7353 snprintf(evStr, EVENT_DESCR_STR_SZ,
7354 "SAS Device Status Change: Deleted: "
7355 "id=%d channel=%d", id, channel);
7356 break;
7357 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7358 snprintf(evStr, EVENT_DESCR_STR_SZ,
7359 "SAS Device Status Change: SMART Data: "
7360 "id=%d channel=%d", id, channel);
7361 break;
7362 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7363 snprintf(evStr, EVENT_DESCR_STR_SZ,
7364 "SAS Device Status Change: No Persistency: "
7365 "id=%d channel=%d", id, channel);
7366 break;
7367 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7368 snprintf(evStr, EVENT_DESCR_STR_SZ,
7369 "SAS Device Status Change: Unsupported Device "
7370 "Discovered : id=%d channel=%d", id, channel);
7371 break;
7372 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7373 snprintf(evStr, EVENT_DESCR_STR_SZ,
7374 "SAS Device Status Change: Internal Device "
7375 "Reset : id=%d channel=%d", id, channel);
7376 break;
7377 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7378 snprintf(evStr, EVENT_DESCR_STR_SZ,
7379 "SAS Device Status Change: Internal Task "
7380 "Abort : id=%d channel=%d", id, channel);
7381 break;
7382 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7383 snprintf(evStr, EVENT_DESCR_STR_SZ,
7384 "SAS Device Status Change: Internal Abort "
7385 "Task Set : id=%d channel=%d", id, channel);
7386 break;
7387 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7388 snprintf(evStr, EVENT_DESCR_STR_SZ,
7389 "SAS Device Status Change: Internal Clear "
7390 "Task Set : id=%d channel=%d", id, channel);
7391 break;
7392 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7393 snprintf(evStr, EVENT_DESCR_STR_SZ,
7394 "SAS Device Status Change: Internal Query "
7395 "Task : id=%d channel=%d", id, channel);
7396 break;
7397 default:
7398 snprintf(evStr, EVENT_DESCR_STR_SZ,
7399 "SAS Device Status Change: Unknown: "
7400 "id=%d channel=%d", id, channel);
7401 break;
7402 }
7403 break;
7404 }
7405 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7406 ds = "Bus Timer Expired";
7407 break;
7408 case MPI_EVENT_QUEUE_FULL:
7409 {
7410 u16 curr_depth = (u16)(evData0 >> 16);
7411 u8 channel = (u8)(evData0 >> 8);
7412 u8 id = (u8)(evData0);
7413
7414 snprintf(evStr, EVENT_DESCR_STR_SZ,
7415 "Queue Full: channel=%d id=%d depth=%d",
7416 channel, id, curr_depth);
7417 break;
7418 }
7419 case MPI_EVENT_SAS_SES:
7420 ds = "SAS SES Event";
7421 break;
7422 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7423 ds = "Persistent Table Full";
7424 break;
7425 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7426 {
7427 u8 LinkRates = (u8)(evData0 >> 8);
7428 u8 PhyNumber = (u8)(evData0);
7429 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7430 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7431 switch (LinkRates) {
7432 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7433 snprintf(evStr, EVENT_DESCR_STR_SZ,
7434 "SAS PHY Link Status: Phy=%d:"
7435 " Rate Unknown",PhyNumber);
7436 break;
7437 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7438 snprintf(evStr, EVENT_DESCR_STR_SZ,
7439 "SAS PHY Link Status: Phy=%d:"
7440 " Phy Disabled",PhyNumber);
7441 break;
7442 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7443 snprintf(evStr, EVENT_DESCR_STR_SZ,
7444 "SAS PHY Link Status: Phy=%d:"
7445 " Failed Speed Nego",PhyNumber);
7446 break;
7447 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7448 snprintf(evStr, EVENT_DESCR_STR_SZ,
7449 "SAS PHY Link Status: Phy=%d:"
7450 " Sata OOB Completed",PhyNumber);
7451 break;
7452 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7453 snprintf(evStr, EVENT_DESCR_STR_SZ,
7454 "SAS PHY Link Status: Phy=%d:"
7455 " Rate 1.5 Gbps",PhyNumber);
7456 break;
7457 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7458 snprintf(evStr, EVENT_DESCR_STR_SZ,
7459 "SAS PHY Link Status: Phy=%d:"
7460 " Rate 3.0 Gbps", PhyNumber);
7461 break;
7462 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7463 snprintf(evStr, EVENT_DESCR_STR_SZ,
7464 "SAS PHY Link Status: Phy=%d:"
7465 " Rate 6.0 Gbps", PhyNumber);
7466 break;
7467 default:
7468 snprintf(evStr, EVENT_DESCR_STR_SZ,
7469 "SAS PHY Link Status: Phy=%d", PhyNumber);
7470 break;
7471 }
7472 break;
7473 }
7474 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7475 ds = "SAS Discovery Error";
7476 break;
7477 case MPI_EVENT_IR_RESYNC_UPDATE:
7478 {
7479 u8 resync_complete = (u8)(evData0 >> 16);
7480 snprintf(evStr, EVENT_DESCR_STR_SZ,
7481 "IR Resync Update: Complete = %d:",resync_complete);
7482 break;
7483 }
7484 case MPI_EVENT_IR2:
7485 {
7486 u8 id = (u8)(evData0);
7487 u8 channel = (u8)(evData0 >> 8);
7488 u8 phys_num = (u8)(evData0 >> 24);
7489 u8 ReasonCode = (u8)(evData0 >> 16);
7490
7491 switch (ReasonCode) {
7492 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7493 snprintf(evStr, EVENT_DESCR_STR_SZ,
7494 "IR2: LD State Changed: "
7495 "id=%d channel=%d phys_num=%d",
7496 id, channel, phys_num);
7497 break;
7498 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7499 snprintf(evStr, EVENT_DESCR_STR_SZ,
7500 "IR2: PD State Changed "
7501 "id=%d channel=%d phys_num=%d",
7502 id, channel, phys_num);
7503 break;
7504 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7505 snprintf(evStr, EVENT_DESCR_STR_SZ,
7506 "IR2: Bad Block Table Full: "
7507 "id=%d channel=%d phys_num=%d",
7508 id, channel, phys_num);
7509 break;
7510 case MPI_EVENT_IR2_RC_PD_INSERTED:
7511 snprintf(evStr, EVENT_DESCR_STR_SZ,
7512 "IR2: PD Inserted: "
7513 "id=%d channel=%d phys_num=%d",
7514 id, channel, phys_num);
7515 break;
7516 case MPI_EVENT_IR2_RC_PD_REMOVED:
7517 snprintf(evStr, EVENT_DESCR_STR_SZ,
7518 "IR2: PD Removed: "
7519 "id=%d channel=%d phys_num=%d",
7520 id, channel, phys_num);
7521 break;
7522 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7523 snprintf(evStr, EVENT_DESCR_STR_SZ,
7524 "IR2: Foreign CFG Detected: "
7525 "id=%d channel=%d phys_num=%d",
7526 id, channel, phys_num);
7527 break;
7528 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7529 snprintf(evStr, EVENT_DESCR_STR_SZ,
7530 "IR2: Rebuild Medium Error: "
7531 "id=%d channel=%d phys_num=%d",
7532 id, channel, phys_num);
7533 break;
7534 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7535 snprintf(evStr, EVENT_DESCR_STR_SZ,
7536 "IR2: Dual Port Added: "
7537 "id=%d channel=%d phys_num=%d",
7538 id, channel, phys_num);
7539 break;
7540 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7541 snprintf(evStr, EVENT_DESCR_STR_SZ,
7542 "IR2: Dual Port Removed: "
7543 "id=%d channel=%d phys_num=%d",
7544 id, channel, phys_num);
7545 break;
7546 default:
7547 ds = "IR2";
7548 break;
7549 }
7550 break;
7551 }
7552 case MPI_EVENT_SAS_DISCOVERY:
7553 {
7554 if (evData0)
7555 ds = "SAS Discovery: Start";
7556 else
7557 ds = "SAS Discovery: Stop";
7558 break;
7559 }
7560 case MPI_EVENT_LOG_ENTRY_ADDED:
7561 ds = "SAS Log Entry Added";
7562 break;
7563
7564 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7565 {
7566 u8 phy_num = (u8)(evData0);
7567 u8 port_num = (u8)(evData0 >> 8);
7568 u8 port_width = (u8)(evData0 >> 16);
7569 u8 primitive = (u8)(evData0 >> 24);
7570 snprintf(evStr, EVENT_DESCR_STR_SZ,
7571 "SAS Broadcast Primitive: phy=%d port=%d "
7572 "width=%d primitive=0x%02x",
7573 phy_num, port_num, port_width, primitive);
7574 break;
7575 }
7576
7577 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7578 {
7579 u8 reason = (u8)(evData0);
7580
7581 switch (reason) {
7582 case MPI_EVENT_SAS_INIT_RC_ADDED:
7583 ds = "SAS Initiator Status Change: Added";
7584 break;
7585 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7586 ds = "SAS Initiator Status Change: Deleted";
7587 break;
7588 default:
7589 ds = "SAS Initiator Status Change";
7590 break;
7591 }
7592 break;
7593 }
7594
7595 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7596 {
7597 u8 max_init = (u8)(evData0);
7598 u8 current_init = (u8)(evData0 >> 8);
7599
7600 snprintf(evStr, EVENT_DESCR_STR_SZ,
7601 "SAS Initiator Device Table Overflow: max initiators=%02d "
7602 "current initiators=%02d",
7603 max_init, current_init);
7604 break;
7605 }
7606 case MPI_EVENT_SAS_SMP_ERROR:
7607 {
7608 u8 status = (u8)(evData0);
7609 u8 port_num = (u8)(evData0 >> 8);
7610 u8 result = (u8)(evData0 >> 16);
7611
7612 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7613 snprintf(evStr, EVENT_DESCR_STR_SZ,
7614 "SAS SMP Error: port=%d result=0x%02x",
7615 port_num, result);
7616 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7617 snprintf(evStr, EVENT_DESCR_STR_SZ,
7618 "SAS SMP Error: port=%d : CRC Error",
7619 port_num);
7620 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7621 snprintf(evStr, EVENT_DESCR_STR_SZ,
7622 "SAS SMP Error: port=%d : Timeout",
7623 port_num);
7624 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7625 snprintf(evStr, EVENT_DESCR_STR_SZ,
7626 "SAS SMP Error: port=%d : No Destination",
7627 port_num);
7628 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7629 snprintf(evStr, EVENT_DESCR_STR_SZ,
7630 "SAS SMP Error: port=%d : Bad Destination",
7631 port_num);
7632 else
7633 snprintf(evStr, EVENT_DESCR_STR_SZ,
7634 "SAS SMP Error: port=%d : status=0x%02x",
7635 port_num, status);
7636 break;
7637 }
7638
7639 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7640 {
7641 u8 reason = (u8)(evData0);
7642
7643 switch (reason) {
7644 case MPI_EVENT_SAS_EXP_RC_ADDED:
7645 ds = "Expander Status Change: Added";
7646 break;
7647 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7648 ds = "Expander Status Change: Deleted";
7649 break;
7650 default:
7651 ds = "Expander Status Change";
7652 break;
7653 }
7654 break;
7655 }
7656
7657 /*
7658 * MPT base "custom" events may be added here...
7659 */
7660 default:
7661 ds = "Unknown";
7662 break;
7663 }
7664 if (ds)
7665 strscpy(evStr, ds, EVENT_DESCR_STR_SZ);
7666
7667
7668 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7669 "MPT event:(%02Xh) : %s\n",
7670 ioc->name, event, evStr));
7671
7672 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7673 ": Event data:\n"));
7674 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7675 devtverboseprintk(ioc, printk(" %08x",
7676 le32_to_cpu(pEventReply->Data[ii])));
7677 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7678}
7679#endif
7680/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7681/**
7682 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7683 * @ioc: Pointer to MPT_ADAPTER structure
7684 * @pEventReply: Pointer to EventNotification reply frame
7685 * @evHandlers: Pointer to integer, number of event handlers
7686 *
7687 * Routes a received EventNotificationReply to all currently registered
7688 * event handlers.
7689 * Returns sum of event handlers return values.
7690 */
7691static int
7692ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7693{
7694 u16 evDataLen;
7695 u32 evData0 = 0;
7696 int ii;
7697 u8 cb_idx;
7698 int r = 0;
7699 int handlers = 0;
7700 u8 event;
7701
7702 /*
7703 * Do platform normalization of values
7704 */
7705 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7706 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7707 if (evDataLen) {
7708 evData0 = le32_to_cpu(pEventReply->Data[0]);
7709 }
7710
7711#ifdef CONFIG_FUSION_LOGGING
7712 if (evDataLen)
7713 mpt_display_event_info(ioc, pEventReply);
7714#endif
7715
7716 /*
7717 * Do general / base driver event processing
7718 */
7719 switch(event) {
7720 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7721 if (evDataLen) {
7722 u8 evState = evData0 & 0xFF;
7723
7724 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7725
7726 /* Update EventState field in cached IocFacts */
7727 if (ioc->facts.Function) {
7728 ioc->facts.EventState = evState;
7729 }
7730 }
7731 break;
7732 case MPI_EVENT_INTEGRATED_RAID:
7733 mptbase_raid_process_event_data(ioc,
7734 (MpiEventDataRaid_t *)pEventReply->Data);
7735 break;
7736 default:
7737 break;
7738 }
7739
7740 /*
7741 * Should this event be logged? Events are written sequentially.
7742 * When buffer is full, start again at the top.
7743 */
7744 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7745 int idx;
7746
7747 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7748
7749 ioc->events[idx].event = event;
7750 ioc->events[idx].eventContext = ioc->eventContext;
7751
7752 for (ii = 0; ii < 2; ii++) {
7753 if (ii < evDataLen)
7754 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7755 else
7756 ioc->events[idx].data[ii] = 0;
7757 }
7758
7759 ioc->eventContext++;
7760 }
7761
7762
7763 /*
7764 * Call each currently registered protocol event handler.
7765 */
7766 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7767 if (MptEvHandlers[cb_idx]) {
7768 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7769 "Routing Event to event handler #%d\n",
7770 ioc->name, cb_idx));
7771 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7772 handlers++;
7773 }
7774 }
7775 /* FIXME? Examine results here? */
7776
7777 /*
7778 * If needed, send (a single) EventAck.
7779 */
7780 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7781 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7782 "EventAck required\n",ioc->name));
7783 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7784 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7785 ioc->name, ii));
7786 }
7787 }
7788
7789 *evHandlers = handlers;
7790 return r;
7791}
7792
7793/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7794/**
7795 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7796 * @ioc: Pointer to MPT_ADAPTER structure
7797 * @log_info: U32 LogInfo reply word from the IOC
7798 *
7799 * Refer to lsi/mpi_log_fc.h.
7800 */
7801static void
7802mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7803{
7804 char *desc = "unknown";
7805
7806 switch (log_info & 0xFF000000) {
7807 case MPI_IOCLOGINFO_FC_INIT_BASE:
7808 desc = "FCP Initiator";
7809 break;
7810 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7811 desc = "FCP Target";
7812 break;
7813 case MPI_IOCLOGINFO_FC_LAN_BASE:
7814 desc = "LAN";
7815 break;
7816 case MPI_IOCLOGINFO_FC_MSG_BASE:
7817 desc = "MPI Message Layer";
7818 break;
7819 case MPI_IOCLOGINFO_FC_LINK_BASE:
7820 desc = "FC Link";
7821 break;
7822 case MPI_IOCLOGINFO_FC_CTX_BASE:
7823 desc = "Context Manager";
7824 break;
7825 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7826 desc = "Invalid Field Offset";
7827 break;
7828 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7829 desc = "State Change Info";
7830 break;
7831 }
7832
7833 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7834 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7835}
7836
7837/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7838/**
7839 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7840 * @ioc: Pointer to MPT_ADAPTER structure
7841 * @log_info: U32 LogInfo word from the IOC
7842 *
7843 * Refer to lsi/sp_log.h.
7844 */
7845static void
7846mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7847{
7848 u32 info = log_info & 0x00FF0000;
7849 char *desc = "unknown";
7850
7851 switch (info) {
7852 case 0x00010000:
7853 desc = "bug! MID not found";
7854 break;
7855
7856 case 0x00020000:
7857 desc = "Parity Error";
7858 break;
7859
7860 case 0x00030000:
7861 desc = "ASYNC Outbound Overrun";
7862 break;
7863
7864 case 0x00040000:
7865 desc = "SYNC Offset Error";
7866 break;
7867
7868 case 0x00050000:
7869 desc = "BM Change";
7870 break;
7871
7872 case 0x00060000:
7873 desc = "Msg In Overflow";
7874 break;
7875
7876 case 0x00070000:
7877 desc = "DMA Error";
7878 break;
7879
7880 case 0x00080000:
7881 desc = "Outbound DMA Overrun";
7882 break;
7883
7884 case 0x00090000:
7885 desc = "Task Management";
7886 break;
7887
7888 case 0x000A0000:
7889 desc = "Device Problem";
7890 break;
7891
7892 case 0x000B0000:
7893 desc = "Invalid Phase Change";
7894 break;
7895
7896 case 0x000C0000:
7897 desc = "Untagged Table Size";
7898 break;
7899
7900 }
7901
7902 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7903}
7904
7905/* strings for sas loginfo */
7906 static char *originator_str[] = {
7907 "IOP", /* 00h */
7908 "PL", /* 01h */
7909 "IR" /* 02h */
7910 };
7911 static char *iop_code_str[] = {
7912 NULL, /* 00h */
7913 "Invalid SAS Address", /* 01h */
7914 NULL, /* 02h */
7915 "Invalid Page", /* 03h */
7916 "Diag Message Error", /* 04h */
7917 "Task Terminated", /* 05h */
7918 "Enclosure Management", /* 06h */
7919 "Target Mode" /* 07h */
7920 };
7921 static char *pl_code_str[] = {
7922 NULL, /* 00h */
7923 "Open Failure", /* 01h */
7924 "Invalid Scatter Gather List", /* 02h */
7925 "Wrong Relative Offset or Frame Length", /* 03h */
7926 "Frame Transfer Error", /* 04h */
7927 "Transmit Frame Connected Low", /* 05h */
7928 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7929 "SATA Read Log Receive Data Error", /* 07h */
7930 "SATA NCQ Fail All Commands After Error", /* 08h */
7931 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7932 "Receive Frame Invalid Message", /* 0Ah */
7933 "Receive Context Message Valid Error", /* 0Bh */
7934 "Receive Frame Current Frame Error", /* 0Ch */
7935 "SATA Link Down", /* 0Dh */
7936 "Discovery SATA Init W IOS", /* 0Eh */
7937 "Config Invalid Page", /* 0Fh */
7938 "Discovery SATA Init Timeout", /* 10h */
7939 "Reset", /* 11h */
7940 "Abort", /* 12h */
7941 "IO Not Yet Executed", /* 13h */
7942 "IO Executed", /* 14h */
7943 "Persistent Reservation Out Not Affiliation "
7944 "Owner", /* 15h */
7945 "Open Transmit DMA Abort", /* 16h */
7946 "IO Device Missing Delay Retry", /* 17h */
7947 "IO Cancelled Due to Receive Error", /* 18h */
7948 NULL, /* 19h */
7949 NULL, /* 1Ah */
7950 NULL, /* 1Bh */
7951 NULL, /* 1Ch */
7952 NULL, /* 1Dh */
7953 NULL, /* 1Eh */
7954 NULL, /* 1Fh */
7955 "Enclosure Management" /* 20h */
7956 };
7957 static char *ir_code_str[] = {
7958 "Raid Action Error", /* 00h */
7959 NULL, /* 00h */
7960 NULL, /* 01h */
7961 NULL, /* 02h */
7962 NULL, /* 03h */
7963 NULL, /* 04h */
7964 NULL, /* 05h */
7965 NULL, /* 06h */
7966 NULL /* 07h */
7967 };
7968 static char *raid_sub_code_str[] = {
7969 NULL, /* 00h */
7970 "Volume Creation Failed: Data Passed too "
7971 "Large", /* 01h */
7972 "Volume Creation Failed: Duplicate Volumes "
7973 "Attempted", /* 02h */
7974 "Volume Creation Failed: Max Number "
7975 "Supported Volumes Exceeded", /* 03h */
7976 "Volume Creation Failed: DMA Error", /* 04h */
7977 "Volume Creation Failed: Invalid Volume Type", /* 05h */
7978 "Volume Creation Failed: Error Reading "
7979 "MFG Page 4", /* 06h */
7980 "Volume Creation Failed: Creating Internal "
7981 "Structures", /* 07h */
7982 NULL, /* 08h */
7983 NULL, /* 09h */
7984 NULL, /* 0Ah */
7985 NULL, /* 0Bh */
7986 NULL, /* 0Ch */
7987 NULL, /* 0Dh */
7988 NULL, /* 0Eh */
7989 NULL, /* 0Fh */
7990 "Activation failed: Already Active Volume", /* 10h */
7991 "Activation failed: Unsupported Volume Type", /* 11h */
7992 "Activation failed: Too Many Active Volumes", /* 12h */
7993 "Activation failed: Volume ID in Use", /* 13h */
7994 "Activation failed: Reported Failure", /* 14h */
7995 "Activation failed: Importing a Volume", /* 15h */
7996 NULL, /* 16h */
7997 NULL, /* 17h */
7998 NULL, /* 18h */
7999 NULL, /* 19h */
8000 NULL, /* 1Ah */
8001 NULL, /* 1Bh */
8002 NULL, /* 1Ch */
8003 NULL, /* 1Dh */
8004 NULL, /* 1Eh */
8005 NULL, /* 1Fh */
8006 "Phys Disk failed: Too Many Phys Disks", /* 20h */
8007 "Phys Disk failed: Data Passed too Large", /* 21h */
8008 "Phys Disk failed: DMA Error", /* 22h */
8009 "Phys Disk failed: Invalid <channel:id>", /* 23h */
8010 "Phys Disk failed: Creating Phys Disk Config "
8011 "Page", /* 24h */
8012 NULL, /* 25h */
8013 NULL, /* 26h */
8014 NULL, /* 27h */
8015 NULL, /* 28h */
8016 NULL, /* 29h */
8017 NULL, /* 2Ah */
8018 NULL, /* 2Bh */
8019 NULL, /* 2Ch */
8020 NULL, /* 2Dh */
8021 NULL, /* 2Eh */
8022 NULL, /* 2Fh */
8023 "Compatibility Error: IR Disabled", /* 30h */
8024 "Compatibility Error: Inquiry Command Failed", /* 31h */
8025 "Compatibility Error: Device not Direct Access "
8026 "Device ", /* 32h */
8027 "Compatibility Error: Removable Device Found", /* 33h */
8028 "Compatibility Error: Device SCSI Version not "
8029 "2 or Higher", /* 34h */
8030 "Compatibility Error: SATA Device, 48 BIT LBA "
8031 "not Supported", /* 35h */
8032 "Compatibility Error: Device doesn't have "
8033 "512 Byte Block Sizes", /* 36h */
8034 "Compatibility Error: Volume Type Check Failed", /* 37h */
8035 "Compatibility Error: Volume Type is "
8036 "Unsupported by FW", /* 38h */
8037 "Compatibility Error: Disk Drive too Small for "
8038 "use in Volume", /* 39h */
8039 "Compatibility Error: Phys Disk for Create "
8040 "Volume not Found", /* 3Ah */
8041 "Compatibility Error: Too Many or too Few "
8042 "Disks for Volume Type", /* 3Bh */
8043 "Compatibility Error: Disk stripe Sizes "
8044 "Must be 64KB", /* 3Ch */
8045 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8046 };
8047
8048/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8049/**
8050 * mpt_sas_log_info - Log information returned from SAS IOC.
8051 * @ioc: Pointer to MPT_ADAPTER structure
8052 * @log_info: U32 LogInfo reply word from the IOC
8053 * @cb_idx: callback function's handle
8054 *
8055 * Refer to lsi/mpi_log_sas.h.
8056 **/
8057static void
8058mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8059{
8060 union loginfo_type {
8061 u32 loginfo;
8062 struct {
8063 u32 subcode:16;
8064 u32 code:8;
8065 u32 originator:4;
8066 u32 bus_type:4;
8067 } dw;
8068 };
8069 union loginfo_type sas_loginfo;
8070 char *originator_desc = NULL;
8071 char *code_desc = NULL;
8072 char *sub_code_desc = NULL;
8073
8074 sas_loginfo.loginfo = log_info;
8075 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8076 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8077 return;
8078
8079 originator_desc = originator_str[sas_loginfo.dw.originator];
8080
8081 switch (sas_loginfo.dw.originator) {
8082
8083 case 0: /* IOP */
8084 if (sas_loginfo.dw.code <
8085 ARRAY_SIZE(iop_code_str))
8086 code_desc = iop_code_str[sas_loginfo.dw.code];
8087 break;
8088 case 1: /* PL */
8089 if (sas_loginfo.dw.code <
8090 ARRAY_SIZE(pl_code_str))
8091 code_desc = pl_code_str[sas_loginfo.dw.code];
8092 break;
8093 case 2: /* IR */
8094 if (sas_loginfo.dw.code >=
8095 ARRAY_SIZE(ir_code_str))
8096 break;
8097 code_desc = ir_code_str[sas_loginfo.dw.code];
8098 if (sas_loginfo.dw.subcode >=
8099 ARRAY_SIZE(raid_sub_code_str))
8100 break;
8101 if (sas_loginfo.dw.code == 0)
8102 sub_code_desc =
8103 raid_sub_code_str[sas_loginfo.dw.subcode];
8104 break;
8105 default:
8106 return;
8107 }
8108
8109 if (sub_code_desc != NULL)
8110 printk(MYIOC_s_INFO_FMT
8111 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8112 " SubCode={%s} cb_idx %s\n",
8113 ioc->name, log_info, originator_desc, code_desc,
8114 sub_code_desc, MptCallbacksName[cb_idx]);
8115 else if (code_desc != NULL)
8116 printk(MYIOC_s_INFO_FMT
8117 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8118 " SubCode(0x%04x) cb_idx %s\n",
8119 ioc->name, log_info, originator_desc, code_desc,
8120 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8121 else
8122 printk(MYIOC_s_INFO_FMT
8123 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8124 " SubCode(0x%04x) cb_idx %s\n",
8125 ioc->name, log_info, originator_desc,
8126 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8127 MptCallbacksName[cb_idx]);
8128}
8129
8130/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8131/**
8132 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8133 * @ioc: Pointer to MPT_ADAPTER structure
8134 * @ioc_status: U32 IOCStatus word from IOC
8135 * @mf: Pointer to MPT request frame
8136 *
8137 * Refer to lsi/mpi.h.
8138 **/
8139static void
8140mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8141{
8142 Config_t *pReq = (Config_t *)mf;
8143 char extend_desc[EVENT_DESCR_STR_SZ];
8144 char *desc = NULL;
8145 u32 form;
8146 u8 page_type;
8147
8148 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8149 page_type = pReq->ExtPageType;
8150 else
8151 page_type = pReq->Header.PageType;
8152
8153 /*
8154 * ignore invalid page messages for GET_NEXT_HANDLE
8155 */
8156 form = le32_to_cpu(pReq->PageAddress);
8157 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8158 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8159 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8160 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8161 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8162 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8163 return;
8164 }
8165 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8166 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8167 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8168 return;
8169 }
8170
8171 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8172 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8173 page_type, pReq->Header.PageNumber, pReq->Action, form);
8174
8175 switch (ioc_status) {
8176
8177 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8178 desc = "Config Page Invalid Action";
8179 break;
8180
8181 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8182 desc = "Config Page Invalid Type";
8183 break;
8184
8185 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8186 desc = "Config Page Invalid Page";
8187 break;
8188
8189 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8190 desc = "Config Page Invalid Data";
8191 break;
8192
8193 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8194 desc = "Config Page No Defaults";
8195 break;
8196
8197 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8198 desc = "Config Page Can't Commit";
8199 break;
8200 }
8201
8202 if (!desc)
8203 return;
8204
8205 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8206 ioc->name, ioc_status, desc, extend_desc));
8207}
8208
8209/**
8210 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8211 * @ioc: Pointer to MPT_ADAPTER structure
8212 * @ioc_status: U32 IOCStatus word from IOC
8213 * @mf: Pointer to MPT request frame
8214 *
8215 * Refer to lsi/mpi.h.
8216 **/
8217static void
8218mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8219{
8220 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8221 char *desc = NULL;
8222
8223 switch (status) {
8224
8225/****************************************************************************/
8226/* Common IOCStatus values for all replies */
8227/****************************************************************************/
8228
8229 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8230 desc = "Invalid Function";
8231 break;
8232
8233 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8234 desc = "Busy";
8235 break;
8236
8237 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8238 desc = "Invalid SGL";
8239 break;
8240
8241 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8242 desc = "Internal Error";
8243 break;
8244
8245 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8246 desc = "Reserved";
8247 break;
8248
8249 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8250 desc = "Insufficient Resources";
8251 break;
8252
8253 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8254 desc = "Invalid Field";
8255 break;
8256
8257 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8258 desc = "Invalid State";
8259 break;
8260
8261/****************************************************************************/
8262/* Config IOCStatus values */
8263/****************************************************************************/
8264
8265 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8266 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8267 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8268 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8269 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8270 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8271 mpt_iocstatus_info_config(ioc, status, mf);
8272 break;
8273
8274/****************************************************************************/
8275/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8276/* */
8277/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8278/* */
8279/****************************************************************************/
8280
8281 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8282 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8283 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8284 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8285 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8286 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8287 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8288 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8289 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8290 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8291 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8292 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8293 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8294 break;
8295
8296/****************************************************************************/
8297/* SCSI Target values */
8298/****************************************************************************/
8299
8300 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8301 desc = "Target: Priority IO";
8302 break;
8303
8304 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8305 desc = "Target: Invalid Port";
8306 break;
8307
8308 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8309 desc = "Target Invalid IO Index:";
8310 break;
8311
8312 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8313 desc = "Target: Aborted";
8314 break;
8315
8316 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8317 desc = "Target: No Conn Retryable";
8318 break;
8319
8320 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8321 desc = "Target: No Connection";
8322 break;
8323
8324 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8325 desc = "Target: Transfer Count Mismatch";
8326 break;
8327
8328 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8329 desc = "Target: STS Data not Sent";
8330 break;
8331
8332 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8333 desc = "Target: Data Offset Error";
8334 break;
8335
8336 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8337 desc = "Target: Too Much Write Data";
8338 break;
8339
8340 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8341 desc = "Target: IU Too Short";
8342 break;
8343
8344 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8345 desc = "Target: ACK NAK Timeout";
8346 break;
8347
8348 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8349 desc = "Target: Nak Received";
8350 break;
8351
8352/****************************************************************************/
8353/* Fibre Channel Direct Access values */
8354/****************************************************************************/
8355
8356 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8357 desc = "FC: Aborted";
8358 break;
8359
8360 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8361 desc = "FC: RX ID Invalid";
8362 break;
8363
8364 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8365 desc = "FC: DID Invalid";
8366 break;
8367
8368 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8369 desc = "FC: Node Logged Out";
8370 break;
8371
8372 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8373 desc = "FC: Exchange Canceled";
8374 break;
8375
8376/****************************************************************************/
8377/* LAN values */
8378/****************************************************************************/
8379
8380 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8381 desc = "LAN: Device not Found";
8382 break;
8383
8384 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8385 desc = "LAN: Device Failure";
8386 break;
8387
8388 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8389 desc = "LAN: Transmit Error";
8390 break;
8391
8392 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8393 desc = "LAN: Transmit Aborted";
8394 break;
8395
8396 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8397 desc = "LAN: Receive Error";
8398 break;
8399
8400 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8401 desc = "LAN: Receive Aborted";
8402 break;
8403
8404 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8405 desc = "LAN: Partial Packet";
8406 break;
8407
8408 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8409 desc = "LAN: Canceled";
8410 break;
8411
8412/****************************************************************************/
8413/* Serial Attached SCSI values */
8414/****************************************************************************/
8415
8416 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8417 desc = "SAS: SMP Request Failed";
8418 break;
8419
8420 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8421 desc = "SAS: SMP Data Overrun";
8422 break;
8423
8424 default:
8425 desc = "Others";
8426 break;
8427 }
8428
8429 if (!desc)
8430 return;
8431
8432 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8433 ioc->name, status, desc));
8434}
8435
8436/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8437EXPORT_SYMBOL(mpt_attach);
8438EXPORT_SYMBOL(mpt_detach);
8439#ifdef CONFIG_PM
8440EXPORT_SYMBOL(mpt_resume);
8441EXPORT_SYMBOL(mpt_suspend);
8442#endif
8443EXPORT_SYMBOL(ioc_list);
8444EXPORT_SYMBOL(mpt_register);
8445EXPORT_SYMBOL(mpt_deregister);
8446EXPORT_SYMBOL(mpt_event_register);
8447EXPORT_SYMBOL(mpt_event_deregister);
8448EXPORT_SYMBOL(mpt_reset_register);
8449EXPORT_SYMBOL(mpt_reset_deregister);
8450EXPORT_SYMBOL(mpt_device_driver_register);
8451EXPORT_SYMBOL(mpt_device_driver_deregister);
8452EXPORT_SYMBOL(mpt_get_msg_frame);
8453EXPORT_SYMBOL(mpt_put_msg_frame);
8454EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8455EXPORT_SYMBOL(mpt_free_msg_frame);
8456EXPORT_SYMBOL(mpt_send_handshake_request);
8457EXPORT_SYMBOL(mpt_verify_adapter);
8458EXPORT_SYMBOL(mpt_GetIocState);
8459EXPORT_SYMBOL(mpt_print_ioc_summary);
8460EXPORT_SYMBOL(mpt_HardResetHandler);
8461EXPORT_SYMBOL(mpt_config);
8462EXPORT_SYMBOL(mpt_findImVolumes);
8463EXPORT_SYMBOL(mpt_alloc_fw_memory);
8464EXPORT_SYMBOL(mpt_free_fw_memory);
8465EXPORT_SYMBOL(mptbase_sas_persist_operation);
8466EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8467
8468/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8469/**
8470 * fusion_init - Fusion MPT base driver initialization routine.
8471 *
8472 * Returns 0 for success, non-zero for failure.
8473 */
8474static int __init
8475fusion_init(void)
8476{
8477 u8 cb_idx;
8478
8479 show_mptmod_ver(my_NAME, my_VERSION);
8480 printk(KERN_INFO COPYRIGHT "\n");
8481
8482 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8483 MptCallbacks[cb_idx] = NULL;
8484 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8485 MptEvHandlers[cb_idx] = NULL;
8486 MptResetHandlers[cb_idx] = NULL;
8487 }
8488
8489 /* Register ourselves (mptbase) in order to facilitate
8490 * EventNotification handling.
8491 */
8492 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8493 "mptbase_reply");
8494
8495 /* Register for hard reset handling callbacks.
8496 */
8497 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8498
8499#ifdef CONFIG_PROC_FS
8500 (void) procmpt_create();
8501#endif
8502 return 0;
8503}
8504
8505/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8506/**
8507 * fusion_exit - Perform driver unload cleanup.
8508 *
8509 * This routine frees all resources associated with each MPT adapter
8510 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8511 */
8512static void __exit
8513fusion_exit(void)
8514{
8515
8516 mpt_reset_deregister(mpt_base_index);
8517
8518#ifdef CONFIG_PROC_FS
8519 procmpt_destroy();
8520#endif
8521}
8522
8523module_init(fusion_init);
8524module_exit(fusion_exit);