Loading...
1/*
2 * Driver for the VoIP USB phones with CM109 chipsets.
3 *
4 * Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org>
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation, version 2.
9 */
10
11/*
12 * Tested devices:
13 * - Komunikate KIP1000
14 * - Genius G-talk
15 * - Allied-Telesis Corega USBPH01
16 * - ...
17 *
18 * This driver is based on the yealink.c driver
19 *
20 * Thanks to:
21 * - Authors of yealink.c
22 * - Thomas Reitmayr
23 * - Oliver Neukum for good review comments and code
24 * - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap
25 * - Dmitry Torokhov for valuable input and review
26 *
27 * Todo:
28 * - Read/write EEPROM
29 */
30
31#include <linux/kernel.h>
32#include <linux/init.h>
33#include <linux/slab.h>
34#include <linux/module.h>
35#include <linux/moduleparam.h>
36#include <linux/rwsem.h>
37#include <linux/usb/input.h>
38
39#define DRIVER_VERSION "20080805"
40#define DRIVER_AUTHOR "Alfred E. Heggestad"
41#define DRIVER_DESC "CM109 phone driver"
42
43static char *phone = "kip1000";
44module_param(phone, charp, S_IRUSR);
45MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
46
47enum {
48 /* HID Registers */
49 HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down */
50 HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0 */
51 HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1 */
52 HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL */
53 HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */
54 HID_OR1 = 0x01, /* GPO - General Purpose Output */
55 HID_OR2 = 0x02, /* Set GPIO to input/output mode */
56 HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL */
57
58 /* HID_IR0 */
59 RECORD_MUTE = 1 << 3,
60 PLAYBACK_MUTE = 1 << 2,
61 VOLUME_DOWN = 1 << 1,
62 VOLUME_UP = 1 << 0,
63
64 /* HID_OR0 */
65 /* bits 7-6
66 0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer
67 and SPDIF
68 1: HID_OR0-3 are used as generic HID registers
69 2: Values written to HID_OR0-3 are also mapped to MCU_CTRL,
70 EEPROM_DATA0-1, EEPROM_CTRL (see Note)
71 3: Reserved
72 */
73 HID_OR_GPO_BUZ_SPDIF = 0 << 6,
74 HID_OR_GENERIC_HID_REG = 1 << 6,
75 HID_OR_MAP_MCU_EEPROM = 2 << 6,
76
77 BUZZER_ON = 1 << 5,
78
79 /* up to 256 normal keys, up to 16 special keys */
80 KEYMAP_SIZE = 256 + 16,
81};
82
83/* CM109 protocol packet */
84struct cm109_ctl_packet {
85 u8 byte[4];
86} __attribute__ ((packed));
87
88enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) };
89
90/* CM109 device structure */
91struct cm109_dev {
92 struct input_dev *idev; /* input device */
93 struct usb_device *udev; /* usb device */
94 struct usb_interface *intf;
95
96 /* irq input channel */
97 struct cm109_ctl_packet *irq_data;
98 dma_addr_t irq_dma;
99 struct urb *urb_irq;
100
101 /* control output channel */
102 struct cm109_ctl_packet *ctl_data;
103 dma_addr_t ctl_dma;
104 struct usb_ctrlrequest *ctl_req;
105 struct urb *urb_ctl;
106 /*
107 * The 3 bitfields below are protected by ctl_submit_lock.
108 * They have to be separate since they are accessed from IRQ
109 * context.
110 */
111 unsigned irq_urb_pending:1; /* irq_urb is in flight */
112 unsigned ctl_urb_pending:1; /* ctl_urb is in flight */
113 unsigned buzzer_pending:1; /* need to issue buzz command */
114 spinlock_t ctl_submit_lock;
115
116 unsigned char buzzer_state; /* on/off */
117
118 /* flags */
119 unsigned open:1;
120 unsigned resetting:1;
121 unsigned shutdown:1;
122
123 /* This mutex protects writes to the above flags */
124 struct mutex pm_mutex;
125
126 unsigned short keymap[KEYMAP_SIZE];
127
128 char phys[64]; /* physical device path */
129 int key_code; /* last reported key */
130 int keybit; /* 0=new scan 1,2,4,8=scan columns */
131 u8 gpi; /* Cached value of GPI (high nibble) */
132};
133
134/******************************************************************************
135 * CM109 key interface
136 *****************************************************************************/
137
138static unsigned short special_keymap(int code)
139{
140 if (code > 0xff) {
141 switch (code - 0xff) {
142 case RECORD_MUTE: return KEY_MUTE;
143 case PLAYBACK_MUTE: return KEY_MUTE;
144 case VOLUME_DOWN: return KEY_VOLUMEDOWN;
145 case VOLUME_UP: return KEY_VOLUMEUP;
146 }
147 }
148 return KEY_RESERVED;
149}
150
151/* Map device buttons to internal key events.
152 *
153 * The "up" and "down" keys, are symbolised by arrows on the button.
154 * The "pickup" and "hangup" keys are symbolised by a green and red phone
155 * on the button.
156
157 Komunikate KIP1000 Keyboard Matrix
158
159 -> -- 1 -- 2 -- 3 --> GPI pin 4 (0x10)
160 | | | |
161 <- -- 4 -- 5 -- 6 --> GPI pin 5 (0x20)
162 | | | |
163 END - 7 -- 8 -- 9 --> GPI pin 6 (0x40)
164 | | | |
165 OK -- * -- 0 -- # --> GPI pin 7 (0x80)
166 | | | |
167
168 /|\ /|\ /|\ /|\
169 | | | |
170GPO
171pin: 3 2 1 0
172 0x8 0x4 0x2 0x1
173
174 */
175static unsigned short keymap_kip1000(int scancode)
176{
177 switch (scancode) { /* phone key: */
178 case 0x82: return KEY_NUMERIC_0; /* 0 */
179 case 0x14: return KEY_NUMERIC_1; /* 1 */
180 case 0x12: return KEY_NUMERIC_2; /* 2 */
181 case 0x11: return KEY_NUMERIC_3; /* 3 */
182 case 0x24: return KEY_NUMERIC_4; /* 4 */
183 case 0x22: return KEY_NUMERIC_5; /* 5 */
184 case 0x21: return KEY_NUMERIC_6; /* 6 */
185 case 0x44: return KEY_NUMERIC_7; /* 7 */
186 case 0x42: return KEY_NUMERIC_8; /* 8 */
187 case 0x41: return KEY_NUMERIC_9; /* 9 */
188 case 0x81: return KEY_NUMERIC_POUND; /* # */
189 case 0x84: return KEY_NUMERIC_STAR; /* * */
190 case 0x88: return KEY_ENTER; /* pickup */
191 case 0x48: return KEY_ESC; /* hangup */
192 case 0x28: return KEY_LEFT; /* IN */
193 case 0x18: return KEY_RIGHT; /* OUT */
194 default: return special_keymap(scancode);
195 }
196}
197
198/*
199 Contributed by Shaun Jackman <sjackman@gmail.com>
200
201 Genius G-Talk keyboard matrix
202 0 1 2 3
203 4: 0 4 8 Talk
204 5: 1 5 9 End
205 6: 2 6 # Up
206 7: 3 7 * Down
207*/
208static unsigned short keymap_gtalk(int scancode)
209{
210 switch (scancode) {
211 case 0x11: return KEY_NUMERIC_0;
212 case 0x21: return KEY_NUMERIC_1;
213 case 0x41: return KEY_NUMERIC_2;
214 case 0x81: return KEY_NUMERIC_3;
215 case 0x12: return KEY_NUMERIC_4;
216 case 0x22: return KEY_NUMERIC_5;
217 case 0x42: return KEY_NUMERIC_6;
218 case 0x82: return KEY_NUMERIC_7;
219 case 0x14: return KEY_NUMERIC_8;
220 case 0x24: return KEY_NUMERIC_9;
221 case 0x44: return KEY_NUMERIC_POUND; /* # */
222 case 0x84: return KEY_NUMERIC_STAR; /* * */
223 case 0x18: return KEY_ENTER; /* Talk (green handset) */
224 case 0x28: return KEY_ESC; /* End (red handset) */
225 case 0x48: return KEY_UP; /* Menu up (rocker switch) */
226 case 0x88: return KEY_DOWN; /* Menu down (rocker switch) */
227 default: return special_keymap(scancode);
228 }
229}
230
231/*
232 * Keymap for Allied-Telesis Corega USBPH01
233 * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html
234 *
235 * Contributed by july@nat.bg
236 */
237static unsigned short keymap_usbph01(int scancode)
238{
239 switch (scancode) {
240 case 0x11: return KEY_NUMERIC_0; /* 0 */
241 case 0x21: return KEY_NUMERIC_1; /* 1 */
242 case 0x41: return KEY_NUMERIC_2; /* 2 */
243 case 0x81: return KEY_NUMERIC_3; /* 3 */
244 case 0x12: return KEY_NUMERIC_4; /* 4 */
245 case 0x22: return KEY_NUMERIC_5; /* 5 */
246 case 0x42: return KEY_NUMERIC_6; /* 6 */
247 case 0x82: return KEY_NUMERIC_7; /* 7 */
248 case 0x14: return KEY_NUMERIC_8; /* 8 */
249 case 0x24: return KEY_NUMERIC_9; /* 9 */
250 case 0x44: return KEY_NUMERIC_POUND; /* # */
251 case 0x84: return KEY_NUMERIC_STAR; /* * */
252 case 0x18: return KEY_ENTER; /* pickup */
253 case 0x28: return KEY_ESC; /* hangup */
254 case 0x48: return KEY_LEFT; /* IN */
255 case 0x88: return KEY_RIGHT; /* OUT */
256 default: return special_keymap(scancode);
257 }
258}
259
260/*
261 * Keymap for ATCom AU-100
262 * http://www.atcom.cn/products.html
263 * http://www.packetizer.com/products/au100/
264 * http://www.voip-info.org/wiki/view/AU-100
265 *
266 * Contributed by daniel@gimpelevich.san-francisco.ca.us
267 */
268static unsigned short keymap_atcom(int scancode)
269{
270 switch (scancode) { /* phone key: */
271 case 0x82: return KEY_NUMERIC_0; /* 0 */
272 case 0x11: return KEY_NUMERIC_1; /* 1 */
273 case 0x12: return KEY_NUMERIC_2; /* 2 */
274 case 0x14: return KEY_NUMERIC_3; /* 3 */
275 case 0x21: return KEY_NUMERIC_4; /* 4 */
276 case 0x22: return KEY_NUMERIC_5; /* 5 */
277 case 0x24: return KEY_NUMERIC_6; /* 6 */
278 case 0x41: return KEY_NUMERIC_7; /* 7 */
279 case 0x42: return KEY_NUMERIC_8; /* 8 */
280 case 0x44: return KEY_NUMERIC_9; /* 9 */
281 case 0x84: return KEY_NUMERIC_POUND; /* # */
282 case 0x81: return KEY_NUMERIC_STAR; /* * */
283 case 0x18: return KEY_ENTER; /* pickup */
284 case 0x28: return KEY_ESC; /* hangup */
285 case 0x48: return KEY_LEFT; /* left arrow */
286 case 0x88: return KEY_RIGHT; /* right arrow */
287 default: return special_keymap(scancode);
288 }
289}
290
291static unsigned short (*keymap)(int) = keymap_kip1000;
292
293/*
294 * Completes a request by converting the data into events for the
295 * input subsystem.
296 */
297static void report_key(struct cm109_dev *dev, int key)
298{
299 struct input_dev *idev = dev->idev;
300
301 if (dev->key_code >= 0) {
302 /* old key up */
303 input_report_key(idev, dev->key_code, 0);
304 }
305
306 dev->key_code = key;
307 if (key >= 0) {
308 /* new valid key */
309 input_report_key(idev, key, 1);
310 }
311
312 input_sync(idev);
313}
314
315/******************************************************************************
316 * CM109 usb communication interface
317 *****************************************************************************/
318
319static void cm109_submit_buzz_toggle(struct cm109_dev *dev)
320{
321 int error;
322
323 if (dev->buzzer_state)
324 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
325 else
326 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
327
328 error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
329 if (error)
330 dev_err(&dev->intf->dev,
331 "%s: usb_submit_urb (urb_ctl) failed %d\n",
332 __func__, error);
333}
334
335/*
336 * IRQ handler
337 */
338static void cm109_urb_irq_callback(struct urb *urb)
339{
340 struct cm109_dev *dev = urb->context;
341 const int status = urb->status;
342 int error;
343
344 dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n",
345 dev->irq_data->byte[0],
346 dev->irq_data->byte[1],
347 dev->irq_data->byte[2],
348 dev->irq_data->byte[3],
349 dev->keybit);
350
351 if (status) {
352 if (status == -ESHUTDOWN)
353 return;
354 dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
355 __func__, status);
356 goto out;
357 }
358
359 /* Special keys */
360 if (dev->irq_data->byte[HID_IR0] & 0x0f) {
361 const int code = (dev->irq_data->byte[HID_IR0] & 0x0f);
362 report_key(dev, dev->keymap[0xff + code]);
363 }
364
365 /* Scan key column */
366 if (dev->keybit == 0xf) {
367
368 /* Any changes ? */
369 if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0))
370 goto out;
371
372 dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0;
373 dev->keybit = 0x1;
374 } else {
375 report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]);
376
377 dev->keybit <<= 1;
378 if (dev->keybit > 0x8)
379 dev->keybit = 0xf;
380 }
381
382 out:
383
384 spin_lock(&dev->ctl_submit_lock);
385
386 dev->irq_urb_pending = 0;
387
388 if (likely(!dev->shutdown)) {
389
390 if (dev->buzzer_state)
391 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
392 else
393 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
394
395 dev->ctl_data->byte[HID_OR1] = dev->keybit;
396 dev->ctl_data->byte[HID_OR2] = dev->keybit;
397
398 dev->buzzer_pending = 0;
399 dev->ctl_urb_pending = 1;
400
401 error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
402 if (error)
403 dev_err(&dev->intf->dev,
404 "%s: usb_submit_urb (urb_ctl) failed %d\n",
405 __func__, error);
406 }
407
408 spin_unlock(&dev->ctl_submit_lock);
409}
410
411static void cm109_urb_ctl_callback(struct urb *urb)
412{
413 struct cm109_dev *dev = urb->context;
414 const int status = urb->status;
415 int error;
416
417 dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n",
418 dev->ctl_data->byte[0],
419 dev->ctl_data->byte[1],
420 dev->ctl_data->byte[2],
421 dev->ctl_data->byte[3]);
422
423 if (status) {
424 if (status == -ESHUTDOWN)
425 return;
426 dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
427 __func__, status);
428 }
429
430 spin_lock(&dev->ctl_submit_lock);
431
432 dev->ctl_urb_pending = 0;
433
434 if (likely(!dev->shutdown)) {
435
436 if (dev->buzzer_pending || status) {
437 dev->buzzer_pending = 0;
438 dev->ctl_urb_pending = 1;
439 cm109_submit_buzz_toggle(dev);
440 } else if (likely(!dev->irq_urb_pending)) {
441 /* ask for key data */
442 dev->irq_urb_pending = 1;
443 error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC);
444 if (error)
445 dev_err(&dev->intf->dev,
446 "%s: usb_submit_urb (urb_irq) failed %d\n",
447 __func__, error);
448 }
449 }
450
451 spin_unlock(&dev->ctl_submit_lock);
452}
453
454static void cm109_toggle_buzzer_async(struct cm109_dev *dev)
455{
456 unsigned long flags;
457
458 spin_lock_irqsave(&dev->ctl_submit_lock, flags);
459
460 if (dev->ctl_urb_pending) {
461 /* URB completion will resubmit */
462 dev->buzzer_pending = 1;
463 } else {
464 dev->ctl_urb_pending = 1;
465 cm109_submit_buzz_toggle(dev);
466 }
467
468 spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
469}
470
471static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on)
472{
473 int error;
474
475 if (on)
476 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
477 else
478 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
479
480 error = usb_control_msg(dev->udev,
481 usb_sndctrlpipe(dev->udev, 0),
482 dev->ctl_req->bRequest,
483 dev->ctl_req->bRequestType,
484 le16_to_cpu(dev->ctl_req->wValue),
485 le16_to_cpu(dev->ctl_req->wIndex),
486 dev->ctl_data,
487 USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
488 if (error < 0 && error != -EINTR)
489 dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n",
490 __func__, error);
491}
492
493static void cm109_stop_traffic(struct cm109_dev *dev)
494{
495 dev->shutdown = 1;
496 /*
497 * Make sure other CPUs see this
498 */
499 smp_wmb();
500
501 usb_kill_urb(dev->urb_ctl);
502 usb_kill_urb(dev->urb_irq);
503
504 cm109_toggle_buzzer_sync(dev, 0);
505
506 dev->shutdown = 0;
507 smp_wmb();
508}
509
510static void cm109_restore_state(struct cm109_dev *dev)
511{
512 if (dev->open) {
513 /*
514 * Restore buzzer state.
515 * This will also kick regular URB submission
516 */
517 cm109_toggle_buzzer_async(dev);
518 }
519}
520
521/******************************************************************************
522 * input event interface
523 *****************************************************************************/
524
525static int cm109_input_open(struct input_dev *idev)
526{
527 struct cm109_dev *dev = input_get_drvdata(idev);
528 int error;
529
530 error = usb_autopm_get_interface(dev->intf);
531 if (error < 0) {
532 dev_err(&idev->dev, "%s - cannot autoresume, result %d\n",
533 __func__, error);
534 return error;
535 }
536
537 mutex_lock(&dev->pm_mutex);
538
539 dev->buzzer_state = 0;
540 dev->key_code = -1; /* no keys pressed */
541 dev->keybit = 0xf;
542
543 /* issue INIT */
544 dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF;
545 dev->ctl_data->byte[HID_OR1] = dev->keybit;
546 dev->ctl_data->byte[HID_OR2] = dev->keybit;
547 dev->ctl_data->byte[HID_OR3] = 0x00;
548
549 error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
550 if (error)
551 dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n",
552 __func__, error);
553 else
554 dev->open = 1;
555
556 mutex_unlock(&dev->pm_mutex);
557
558 if (error)
559 usb_autopm_put_interface(dev->intf);
560
561 return error;
562}
563
564static void cm109_input_close(struct input_dev *idev)
565{
566 struct cm109_dev *dev = input_get_drvdata(idev);
567
568 mutex_lock(&dev->pm_mutex);
569
570 /*
571 * Once we are here event delivery is stopped so we
572 * don't need to worry about someone starting buzzer
573 * again
574 */
575 cm109_stop_traffic(dev);
576 dev->open = 0;
577
578 mutex_unlock(&dev->pm_mutex);
579
580 usb_autopm_put_interface(dev->intf);
581}
582
583static int cm109_input_ev(struct input_dev *idev, unsigned int type,
584 unsigned int code, int value)
585{
586 struct cm109_dev *dev = input_get_drvdata(idev);
587
588 dev_dbg(&dev->intf->dev,
589 "input_ev: type=%u code=%u value=%d\n", type, code, value);
590
591 if (type != EV_SND)
592 return -EINVAL;
593
594 switch (code) {
595 case SND_TONE:
596 case SND_BELL:
597 dev->buzzer_state = !!value;
598 if (!dev->resetting)
599 cm109_toggle_buzzer_async(dev);
600 return 0;
601
602 default:
603 return -EINVAL;
604 }
605}
606
607
608/******************************************************************************
609 * Linux interface and usb initialisation
610 *****************************************************************************/
611
612struct driver_info {
613 char *name;
614};
615
616static const struct driver_info info_cm109 = {
617 .name = "CM109 USB driver",
618};
619
620enum {
621 VENDOR_ID = 0x0d8c, /* C-Media Electronics */
622 PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */
623};
624
625/* table of devices that work with this driver */
626static const struct usb_device_id cm109_usb_table[] = {
627 {
628 .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
629 USB_DEVICE_ID_MATCH_INT_INFO,
630 .idVendor = VENDOR_ID,
631 .idProduct = PRODUCT_ID_CM109,
632 .bInterfaceClass = USB_CLASS_HID,
633 .bInterfaceSubClass = 0,
634 .bInterfaceProtocol = 0,
635 .driver_info = (kernel_ulong_t) &info_cm109
636 },
637 /* you can add more devices here with product ID 0x0008 - 0x000f */
638 { }
639};
640
641static void cm109_usb_cleanup(struct cm109_dev *dev)
642{
643 kfree(dev->ctl_req);
644 if (dev->ctl_data)
645 usb_free_coherent(dev->udev, USB_PKT_LEN,
646 dev->ctl_data, dev->ctl_dma);
647 if (dev->irq_data)
648 usb_free_coherent(dev->udev, USB_PKT_LEN,
649 dev->irq_data, dev->irq_dma);
650
651 usb_free_urb(dev->urb_irq); /* parameter validation in core/urb */
652 usb_free_urb(dev->urb_ctl); /* parameter validation in core/urb */
653 kfree(dev);
654}
655
656static void cm109_usb_disconnect(struct usb_interface *interface)
657{
658 struct cm109_dev *dev = usb_get_intfdata(interface);
659
660 usb_set_intfdata(interface, NULL);
661 input_unregister_device(dev->idev);
662 cm109_usb_cleanup(dev);
663}
664
665static int cm109_usb_probe(struct usb_interface *intf,
666 const struct usb_device_id *id)
667{
668 struct usb_device *udev = interface_to_usbdev(intf);
669 struct driver_info *nfo = (struct driver_info *)id->driver_info;
670 struct usb_host_interface *interface;
671 struct usb_endpoint_descriptor *endpoint;
672 struct cm109_dev *dev;
673 struct input_dev *input_dev = NULL;
674 int ret, pipe, i;
675 int error = -ENOMEM;
676
677 interface = intf->cur_altsetting;
678 endpoint = &interface->endpoint[0].desc;
679
680 if (!usb_endpoint_is_int_in(endpoint))
681 return -ENODEV;
682
683 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
684 if (!dev)
685 return -ENOMEM;
686
687 spin_lock_init(&dev->ctl_submit_lock);
688 mutex_init(&dev->pm_mutex);
689
690 dev->udev = udev;
691 dev->intf = intf;
692
693 dev->idev = input_dev = input_allocate_device();
694 if (!input_dev)
695 goto err_out;
696
697 /* allocate usb buffers */
698 dev->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN,
699 GFP_KERNEL, &dev->irq_dma);
700 if (!dev->irq_data)
701 goto err_out;
702
703 dev->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN,
704 GFP_KERNEL, &dev->ctl_dma);
705 if (!dev->ctl_data)
706 goto err_out;
707
708 dev->ctl_req = kmalloc(sizeof(*(dev->ctl_req)), GFP_KERNEL);
709 if (!dev->ctl_req)
710 goto err_out;
711
712 /* allocate urb structures */
713 dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
714 if (!dev->urb_irq)
715 goto err_out;
716
717 dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
718 if (!dev->urb_ctl)
719 goto err_out;
720
721 /* get a handle to the interrupt data pipe */
722 pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
723 ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
724 if (ret != USB_PKT_LEN)
725 dev_err(&intf->dev, "invalid payload size %d, expected %d\n",
726 ret, USB_PKT_LEN);
727
728 /* initialise irq urb */
729 usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data,
730 USB_PKT_LEN,
731 cm109_urb_irq_callback, dev, endpoint->bInterval);
732 dev->urb_irq->transfer_dma = dev->irq_dma;
733 dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
734 dev->urb_irq->dev = udev;
735
736 /* initialise ctl urb */
737 dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
738 USB_DIR_OUT;
739 dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION;
740 dev->ctl_req->wValue = cpu_to_le16(0x200);
741 dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
742 dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN);
743
744 usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
745 (void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN,
746 cm109_urb_ctl_callback, dev);
747 dev->urb_ctl->transfer_dma = dev->ctl_dma;
748 dev->urb_ctl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
749 dev->urb_ctl->dev = udev;
750
751 /* find out the physical bus location */
752 usb_make_path(udev, dev->phys, sizeof(dev->phys));
753 strlcat(dev->phys, "/input0", sizeof(dev->phys));
754
755 /* register settings for the input device */
756 input_dev->name = nfo->name;
757 input_dev->phys = dev->phys;
758 usb_to_input_id(udev, &input_dev->id);
759 input_dev->dev.parent = &intf->dev;
760
761 input_set_drvdata(input_dev, dev);
762 input_dev->open = cm109_input_open;
763 input_dev->close = cm109_input_close;
764 input_dev->event = cm109_input_ev;
765
766 input_dev->keycode = dev->keymap;
767 input_dev->keycodesize = sizeof(unsigned char);
768 input_dev->keycodemax = ARRAY_SIZE(dev->keymap);
769
770 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND);
771 input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
772
773 /* register available key events */
774 for (i = 0; i < KEYMAP_SIZE; i++) {
775 unsigned short k = keymap(i);
776 dev->keymap[i] = k;
777 __set_bit(k, input_dev->keybit);
778 }
779 __clear_bit(KEY_RESERVED, input_dev->keybit);
780
781 error = input_register_device(dev->idev);
782 if (error)
783 goto err_out;
784
785 usb_set_intfdata(intf, dev);
786
787 return 0;
788
789 err_out:
790 input_free_device(input_dev);
791 cm109_usb_cleanup(dev);
792 return error;
793}
794
795static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message)
796{
797 struct cm109_dev *dev = usb_get_intfdata(intf);
798
799 dev_info(&intf->dev, "cm109: usb_suspend (event=%d)\n", message.event);
800
801 mutex_lock(&dev->pm_mutex);
802 cm109_stop_traffic(dev);
803 mutex_unlock(&dev->pm_mutex);
804
805 return 0;
806}
807
808static int cm109_usb_resume(struct usb_interface *intf)
809{
810 struct cm109_dev *dev = usb_get_intfdata(intf);
811
812 dev_info(&intf->dev, "cm109: usb_resume\n");
813
814 mutex_lock(&dev->pm_mutex);
815 cm109_restore_state(dev);
816 mutex_unlock(&dev->pm_mutex);
817
818 return 0;
819}
820
821static int cm109_usb_pre_reset(struct usb_interface *intf)
822{
823 struct cm109_dev *dev = usb_get_intfdata(intf);
824
825 mutex_lock(&dev->pm_mutex);
826
827 /*
828 * Make sure input events don't try to toggle buzzer
829 * while we are resetting
830 */
831 dev->resetting = 1;
832 smp_wmb();
833
834 cm109_stop_traffic(dev);
835
836 return 0;
837}
838
839static int cm109_usb_post_reset(struct usb_interface *intf)
840{
841 struct cm109_dev *dev = usb_get_intfdata(intf);
842
843 dev->resetting = 0;
844 smp_wmb();
845
846 cm109_restore_state(dev);
847
848 mutex_unlock(&dev->pm_mutex);
849
850 return 0;
851}
852
853static struct usb_driver cm109_driver = {
854 .name = "cm109",
855 .probe = cm109_usb_probe,
856 .disconnect = cm109_usb_disconnect,
857 .suspend = cm109_usb_suspend,
858 .resume = cm109_usb_resume,
859 .reset_resume = cm109_usb_resume,
860 .pre_reset = cm109_usb_pre_reset,
861 .post_reset = cm109_usb_post_reset,
862 .id_table = cm109_usb_table,
863 .supports_autosuspend = 1,
864};
865
866static int __init cm109_select_keymap(void)
867{
868 /* Load the phone keymap */
869 if (!strcasecmp(phone, "kip1000")) {
870 keymap = keymap_kip1000;
871 printk(KERN_INFO KBUILD_MODNAME ": "
872 "Keymap for Komunikate KIP1000 phone loaded\n");
873 } else if (!strcasecmp(phone, "gtalk")) {
874 keymap = keymap_gtalk;
875 printk(KERN_INFO KBUILD_MODNAME ": "
876 "Keymap for Genius G-talk phone loaded\n");
877 } else if (!strcasecmp(phone, "usbph01")) {
878 keymap = keymap_usbph01;
879 printk(KERN_INFO KBUILD_MODNAME ": "
880 "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
881 } else if (!strcasecmp(phone, "atcom")) {
882 keymap = keymap_atcom;
883 printk(KERN_INFO KBUILD_MODNAME ": "
884 "Keymap for ATCom AU-100 phone loaded\n");
885 } else {
886 printk(KERN_ERR KBUILD_MODNAME ": "
887 "Unsupported phone: %s\n", phone);
888 return -EINVAL;
889 }
890
891 return 0;
892}
893
894static int __init cm109_init(void)
895{
896 int err;
897
898 err = cm109_select_keymap();
899 if (err)
900 return err;
901
902 err = usb_register(&cm109_driver);
903 if (err)
904 return err;
905
906 printk(KERN_INFO KBUILD_MODNAME ": "
907 DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n");
908
909 return 0;
910}
911
912static void __exit cm109_exit(void)
913{
914 usb_deregister(&cm109_driver);
915}
916
917module_init(cm109_init);
918module_exit(cm109_exit);
919
920MODULE_DEVICE_TABLE(usb, cm109_usb_table);
921
922MODULE_AUTHOR(DRIVER_AUTHOR);
923MODULE_DESCRIPTION(DRIVER_DESC);
924MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Driver for the VoIP USB phones with CM109 chipsets.
4 *
5 * Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org>
6 */
7
8/*
9 * Tested devices:
10 * - Komunikate KIP1000
11 * - Genius G-talk
12 * - Allied-Telesis Corega USBPH01
13 * - ...
14 *
15 * This driver is based on the yealink.c driver
16 *
17 * Thanks to:
18 * - Authors of yealink.c
19 * - Thomas Reitmayr
20 * - Oliver Neukum for good review comments and code
21 * - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap
22 * - Dmitry Torokhov for valuable input and review
23 *
24 * Todo:
25 * - Read/write EEPROM
26 */
27
28#include <linux/kernel.h>
29#include <linux/init.h>
30#include <linux/slab.h>
31#include <linux/module.h>
32#include <linux/moduleparam.h>
33#include <linux/rwsem.h>
34#include <linux/usb/input.h>
35
36#define DRIVER_VERSION "20080805"
37#define DRIVER_AUTHOR "Alfred E. Heggestad"
38#define DRIVER_DESC "CM109 phone driver"
39
40static char *phone = "kip1000";
41module_param(phone, charp, S_IRUSR);
42MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
43
44enum {
45 /* HID Registers */
46 HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down */
47 HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0 */
48 HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1 */
49 HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL */
50 HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */
51 HID_OR1 = 0x01, /* GPO - General Purpose Output */
52 HID_OR2 = 0x02, /* Set GPIO to input/output mode */
53 HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL */
54
55 /* HID_IR0 */
56 RECORD_MUTE = 1 << 3,
57 PLAYBACK_MUTE = 1 << 2,
58 VOLUME_DOWN = 1 << 1,
59 VOLUME_UP = 1 << 0,
60
61 /* HID_OR0 */
62 /* bits 7-6
63 0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer
64 and SPDIF
65 1: HID_OR0-3 are used as generic HID registers
66 2: Values written to HID_OR0-3 are also mapped to MCU_CTRL,
67 EEPROM_DATA0-1, EEPROM_CTRL (see Note)
68 3: Reserved
69 */
70 HID_OR_GPO_BUZ_SPDIF = 0 << 6,
71 HID_OR_GENERIC_HID_REG = 1 << 6,
72 HID_OR_MAP_MCU_EEPROM = 2 << 6,
73
74 BUZZER_ON = 1 << 5,
75
76 /* up to 256 normal keys, up to 15 special key combinations */
77 KEYMAP_SIZE = 256 + 15,
78};
79
80/* CM109 protocol packet */
81struct cm109_ctl_packet {
82 u8 byte[4];
83} __attribute__ ((packed));
84
85enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) };
86
87/* CM109 device structure */
88struct cm109_dev {
89 struct input_dev *idev; /* input device */
90 struct usb_device *udev; /* usb device */
91 struct usb_interface *intf;
92
93 /* irq input channel */
94 struct cm109_ctl_packet *irq_data;
95 dma_addr_t irq_dma;
96 struct urb *urb_irq;
97
98 /* control output channel */
99 struct cm109_ctl_packet *ctl_data;
100 dma_addr_t ctl_dma;
101 struct usb_ctrlrequest *ctl_req;
102 struct urb *urb_ctl;
103 /*
104 * The 3 bitfields below are protected by ctl_submit_lock.
105 * They have to be separate since they are accessed from IRQ
106 * context.
107 */
108 unsigned irq_urb_pending:1; /* irq_urb is in flight */
109 unsigned ctl_urb_pending:1; /* ctl_urb is in flight */
110 unsigned buzzer_pending:1; /* need to issue buzz command */
111 spinlock_t ctl_submit_lock;
112
113 unsigned char buzzer_state; /* on/off */
114
115 /* flags */
116 unsigned open:1;
117 unsigned resetting:1;
118 unsigned shutdown:1;
119
120 /* This mutex protects writes to the above flags */
121 struct mutex pm_mutex;
122
123 unsigned short keymap[KEYMAP_SIZE];
124
125 char phys[64]; /* physical device path */
126 int key_code; /* last reported key */
127 int keybit; /* 0=new scan 1,2,4,8=scan columns */
128 u8 gpi; /* Cached value of GPI (high nibble) */
129};
130
131/******************************************************************************
132 * CM109 key interface
133 *****************************************************************************/
134
135static unsigned short special_keymap(int code)
136{
137 if (code > 0xff) {
138 switch (code - 0xff) {
139 case RECORD_MUTE: return KEY_MICMUTE;
140 case PLAYBACK_MUTE: return KEY_MUTE;
141 case VOLUME_DOWN: return KEY_VOLUMEDOWN;
142 case VOLUME_UP: return KEY_VOLUMEUP;
143 }
144 }
145 return KEY_RESERVED;
146}
147
148/* Map device buttons to internal key events.
149 *
150 * The "up" and "down" keys, are symbolised by arrows on the button.
151 * The "pickup" and "hangup" keys are symbolised by a green and red phone
152 * on the button.
153
154 Komunikate KIP1000 Keyboard Matrix
155
156 -> -- 1 -- 2 -- 3 --> GPI pin 4 (0x10)
157 | | | |
158 <- -- 4 -- 5 -- 6 --> GPI pin 5 (0x20)
159 | | | |
160 END - 7 -- 8 -- 9 --> GPI pin 6 (0x40)
161 | | | |
162 OK -- * -- 0 -- # --> GPI pin 7 (0x80)
163 | | | |
164
165 /|\ /|\ /|\ /|\
166 | | | |
167GPO
168pin: 3 2 1 0
169 0x8 0x4 0x2 0x1
170
171 */
172static unsigned short keymap_kip1000(int scancode)
173{
174 switch (scancode) { /* phone key: */
175 case 0x82: return KEY_NUMERIC_0; /* 0 */
176 case 0x14: return KEY_NUMERIC_1; /* 1 */
177 case 0x12: return KEY_NUMERIC_2; /* 2 */
178 case 0x11: return KEY_NUMERIC_3; /* 3 */
179 case 0x24: return KEY_NUMERIC_4; /* 4 */
180 case 0x22: return KEY_NUMERIC_5; /* 5 */
181 case 0x21: return KEY_NUMERIC_6; /* 6 */
182 case 0x44: return KEY_NUMERIC_7; /* 7 */
183 case 0x42: return KEY_NUMERIC_8; /* 8 */
184 case 0x41: return KEY_NUMERIC_9; /* 9 */
185 case 0x81: return KEY_NUMERIC_POUND; /* # */
186 case 0x84: return KEY_NUMERIC_STAR; /* * */
187 case 0x88: return KEY_ENTER; /* pickup */
188 case 0x48: return KEY_ESC; /* hangup */
189 case 0x28: return KEY_LEFT; /* IN */
190 case 0x18: return KEY_RIGHT; /* OUT */
191 default: return special_keymap(scancode);
192 }
193}
194
195/*
196 Contributed by Shaun Jackman <sjackman@gmail.com>
197
198 Genius G-Talk keyboard matrix
199 0 1 2 3
200 4: 0 4 8 Talk
201 5: 1 5 9 End
202 6: 2 6 # Up
203 7: 3 7 * Down
204*/
205static unsigned short keymap_gtalk(int scancode)
206{
207 switch (scancode) {
208 case 0x11: return KEY_NUMERIC_0;
209 case 0x21: return KEY_NUMERIC_1;
210 case 0x41: return KEY_NUMERIC_2;
211 case 0x81: return KEY_NUMERIC_3;
212 case 0x12: return KEY_NUMERIC_4;
213 case 0x22: return KEY_NUMERIC_5;
214 case 0x42: return KEY_NUMERIC_6;
215 case 0x82: return KEY_NUMERIC_7;
216 case 0x14: return KEY_NUMERIC_8;
217 case 0x24: return KEY_NUMERIC_9;
218 case 0x44: return KEY_NUMERIC_POUND; /* # */
219 case 0x84: return KEY_NUMERIC_STAR; /* * */
220 case 0x18: return KEY_ENTER; /* Talk (green handset) */
221 case 0x28: return KEY_ESC; /* End (red handset) */
222 case 0x48: return KEY_UP; /* Menu up (rocker switch) */
223 case 0x88: return KEY_DOWN; /* Menu down (rocker switch) */
224 default: return special_keymap(scancode);
225 }
226}
227
228/*
229 * Keymap for Allied-Telesis Corega USBPH01
230 * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html
231 *
232 * Contributed by july@nat.bg
233 */
234static unsigned short keymap_usbph01(int scancode)
235{
236 switch (scancode) {
237 case 0x11: return KEY_NUMERIC_0; /* 0 */
238 case 0x21: return KEY_NUMERIC_1; /* 1 */
239 case 0x41: return KEY_NUMERIC_2; /* 2 */
240 case 0x81: return KEY_NUMERIC_3; /* 3 */
241 case 0x12: return KEY_NUMERIC_4; /* 4 */
242 case 0x22: return KEY_NUMERIC_5; /* 5 */
243 case 0x42: return KEY_NUMERIC_6; /* 6 */
244 case 0x82: return KEY_NUMERIC_7; /* 7 */
245 case 0x14: return KEY_NUMERIC_8; /* 8 */
246 case 0x24: return KEY_NUMERIC_9; /* 9 */
247 case 0x44: return KEY_NUMERIC_POUND; /* # */
248 case 0x84: return KEY_NUMERIC_STAR; /* * */
249 case 0x18: return KEY_ENTER; /* pickup */
250 case 0x28: return KEY_ESC; /* hangup */
251 case 0x48: return KEY_LEFT; /* IN */
252 case 0x88: return KEY_RIGHT; /* OUT */
253 default: return special_keymap(scancode);
254 }
255}
256
257/*
258 * Keymap for ATCom AU-100
259 * http://www.atcom.cn/products.html
260 * http://www.packetizer.com/products/au100/
261 * http://www.voip-info.org/wiki/view/AU-100
262 *
263 * Contributed by daniel@gimpelevich.san-francisco.ca.us
264 */
265static unsigned short keymap_atcom(int scancode)
266{
267 switch (scancode) { /* phone key: */
268 case 0x82: return KEY_NUMERIC_0; /* 0 */
269 case 0x11: return KEY_NUMERIC_1; /* 1 */
270 case 0x12: return KEY_NUMERIC_2; /* 2 */
271 case 0x14: return KEY_NUMERIC_3; /* 3 */
272 case 0x21: return KEY_NUMERIC_4; /* 4 */
273 case 0x22: return KEY_NUMERIC_5; /* 5 */
274 case 0x24: return KEY_NUMERIC_6; /* 6 */
275 case 0x41: return KEY_NUMERIC_7; /* 7 */
276 case 0x42: return KEY_NUMERIC_8; /* 8 */
277 case 0x44: return KEY_NUMERIC_9; /* 9 */
278 case 0x84: return KEY_NUMERIC_POUND; /* # */
279 case 0x81: return KEY_NUMERIC_STAR; /* * */
280 case 0x18: return KEY_ENTER; /* pickup */
281 case 0x28: return KEY_ESC; /* hangup */
282 case 0x48: return KEY_LEFT; /* left arrow */
283 case 0x88: return KEY_RIGHT; /* right arrow */
284 default: return special_keymap(scancode);
285 }
286}
287
288static unsigned short (*keymap)(int) = keymap_kip1000;
289
290/*
291 * Completes a request by converting the data into events for the
292 * input subsystem.
293 */
294static void report_key(struct cm109_dev *dev, int key)
295{
296 struct input_dev *idev = dev->idev;
297
298 if (dev->key_code >= 0) {
299 /* old key up */
300 input_report_key(idev, dev->key_code, 0);
301 }
302
303 dev->key_code = key;
304 if (key >= 0) {
305 /* new valid key */
306 input_report_key(idev, key, 1);
307 }
308
309 input_sync(idev);
310}
311
312/*
313 * Converts data of special key presses (volume, mute) into events
314 * for the input subsystem, sends press-n-release for mute keys.
315 */
316static void cm109_report_special(struct cm109_dev *dev)
317{
318 static const u8 autorelease = RECORD_MUTE | PLAYBACK_MUTE;
319 struct input_dev *idev = dev->idev;
320 u8 data = dev->irq_data->byte[HID_IR0];
321 unsigned short keycode;
322 int i;
323
324 for (i = 0; i < 4; i++) {
325 keycode = dev->keymap[0xff + BIT(i)];
326 if (keycode == KEY_RESERVED)
327 continue;
328
329 input_report_key(idev, keycode, data & BIT(i));
330 if (data & autorelease & BIT(i)) {
331 input_sync(idev);
332 input_report_key(idev, keycode, 0);
333 }
334 }
335 input_sync(idev);
336}
337
338/******************************************************************************
339 * CM109 usb communication interface
340 *****************************************************************************/
341
342static void cm109_submit_buzz_toggle(struct cm109_dev *dev)
343{
344 int error;
345
346 if (dev->buzzer_state)
347 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
348 else
349 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
350
351 error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
352 if (error)
353 dev_err(&dev->intf->dev,
354 "%s: usb_submit_urb (urb_ctl) failed %d\n",
355 __func__, error);
356}
357
358static void cm109_submit_ctl(struct cm109_dev *dev)
359{
360 int error;
361
362 guard(spinlock_irqsave)(&dev->ctl_submit_lock);
363
364 dev->irq_urb_pending = 0;
365
366 if (unlikely(dev->shutdown))
367 return;
368
369 if (dev->buzzer_state)
370 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
371 else
372 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
373
374 dev->ctl_data->byte[HID_OR1] = dev->keybit;
375 dev->ctl_data->byte[HID_OR2] = dev->keybit;
376
377 dev->buzzer_pending = 0;
378 dev->ctl_urb_pending = 1;
379
380 error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
381 if (error)
382 dev_err(&dev->intf->dev,
383 "%s: usb_submit_urb (urb_ctl) failed %d\n",
384 __func__, error);
385}
386
387/*
388 * IRQ handler
389 */
390static void cm109_urb_irq_callback(struct urb *urb)
391{
392 struct cm109_dev *dev = urb->context;
393 const int status = urb->status;
394
395 dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n",
396 dev->irq_data->byte[0],
397 dev->irq_data->byte[1],
398 dev->irq_data->byte[2],
399 dev->irq_data->byte[3],
400 dev->keybit);
401
402 if (status) {
403 if (status == -ESHUTDOWN)
404 return;
405 dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
406 __func__, status);
407 goto out;
408 }
409
410 /* Special keys */
411 cm109_report_special(dev);
412
413 /* Scan key column */
414 if (dev->keybit == 0xf) {
415
416 /* Any changes ? */
417 if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0))
418 goto out;
419
420 dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0;
421 dev->keybit = 0x1;
422 } else {
423 report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]);
424
425 dev->keybit <<= 1;
426 if (dev->keybit > 0x8)
427 dev->keybit = 0xf;
428 }
429
430 out:
431 cm109_submit_ctl(dev);
432}
433
434static void cm109_urb_ctl_callback(struct urb *urb)
435{
436 struct cm109_dev *dev = urb->context;
437 const int status = urb->status;
438 int error;
439
440 dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n",
441 dev->ctl_data->byte[0],
442 dev->ctl_data->byte[1],
443 dev->ctl_data->byte[2],
444 dev->ctl_data->byte[3]);
445
446 if (status) {
447 if (status == -ESHUTDOWN)
448 return;
449 dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
450 __func__, status);
451 }
452
453 guard(spinlock_irqsave)(&dev->ctl_submit_lock);
454
455 dev->ctl_urb_pending = 0;
456
457 if (unlikely(dev->shutdown))
458 return;
459
460 if (dev->buzzer_pending || status) {
461 dev->buzzer_pending = 0;
462 dev->ctl_urb_pending = 1;
463 cm109_submit_buzz_toggle(dev);
464 } else if (likely(!dev->irq_urb_pending)) {
465 /* ask for key data */
466 dev->irq_urb_pending = 1;
467 error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC);
468 if (error)
469 dev_err(&dev->intf->dev,
470 "%s: usb_submit_urb (urb_irq) failed %d\n",
471 __func__, error);
472 }
473}
474
475static void cm109_toggle_buzzer_async(struct cm109_dev *dev)
476{
477 guard(spinlock_irqsave)(&dev->ctl_submit_lock);
478
479 if (dev->ctl_urb_pending) {
480 /* URB completion will resubmit */
481 dev->buzzer_pending = 1;
482 } else {
483 dev->ctl_urb_pending = 1;
484 cm109_submit_buzz_toggle(dev);
485 }
486}
487
488static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on)
489{
490 int error;
491
492 if (on)
493 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
494 else
495 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
496
497 error = usb_control_msg(dev->udev,
498 usb_sndctrlpipe(dev->udev, 0),
499 dev->ctl_req->bRequest,
500 dev->ctl_req->bRequestType,
501 le16_to_cpu(dev->ctl_req->wValue),
502 le16_to_cpu(dev->ctl_req->wIndex),
503 dev->ctl_data,
504 USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
505 if (error < 0 && error != -EINTR)
506 dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n",
507 __func__, error);
508}
509
510static void cm109_stop_traffic(struct cm109_dev *dev)
511{
512 dev->shutdown = 1;
513 /*
514 * Make sure other CPUs see this
515 */
516 smp_wmb();
517
518 usb_kill_urb(dev->urb_ctl);
519 usb_kill_urb(dev->urb_irq);
520
521 cm109_toggle_buzzer_sync(dev, 0);
522
523 dev->shutdown = 0;
524 smp_wmb();
525}
526
527static void cm109_restore_state(struct cm109_dev *dev)
528{
529 if (dev->open) {
530 /*
531 * Restore buzzer state.
532 * This will also kick regular URB submission
533 */
534 cm109_toggle_buzzer_async(dev);
535 }
536}
537
538/******************************************************************************
539 * input event interface
540 *****************************************************************************/
541
542static int cm109_input_open(struct input_dev *idev)
543{
544 struct cm109_dev *dev = input_get_drvdata(idev);
545 int error;
546
547 error = usb_autopm_get_interface(dev->intf);
548 if (error < 0) {
549 dev_err(&idev->dev, "%s - cannot autoresume, result %d\n",
550 __func__, error);
551 return error;
552 }
553
554 scoped_guard(mutex, &dev->pm_mutex) {
555 dev->buzzer_state = 0;
556 dev->key_code = -1; /* no keys pressed */
557 dev->keybit = 0xf;
558
559 /* issue INIT */
560 dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF;
561 dev->ctl_data->byte[HID_OR1] = dev->keybit;
562 dev->ctl_data->byte[HID_OR2] = dev->keybit;
563 dev->ctl_data->byte[HID_OR3] = 0x00;
564
565 dev->ctl_urb_pending = 1;
566 error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
567 if (!error) {
568 dev->open = 1;
569 return 0;
570 }
571 }
572
573 dev->ctl_urb_pending = 0;
574 usb_autopm_put_interface(dev->intf);
575
576 dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n",
577 __func__, error);
578
579 return error;
580}
581
582static void cm109_input_close(struct input_dev *idev)
583{
584 struct cm109_dev *dev = input_get_drvdata(idev);
585
586 scoped_guard(mutex, &dev->pm_mutex) {
587 /*
588 * Once we are here event delivery is stopped so we
589 * don't need to worry about someone starting buzzer
590 * again
591 */
592 cm109_stop_traffic(dev);
593 dev->open = 0;
594 }
595
596 usb_autopm_put_interface(dev->intf);
597}
598
599static int cm109_input_ev(struct input_dev *idev, unsigned int type,
600 unsigned int code, int value)
601{
602 struct cm109_dev *dev = input_get_drvdata(idev);
603
604 dev_dbg(&dev->intf->dev,
605 "input_ev: type=%u code=%u value=%d\n", type, code, value);
606
607 if (type != EV_SND)
608 return -EINVAL;
609
610 switch (code) {
611 case SND_TONE:
612 case SND_BELL:
613 dev->buzzer_state = !!value;
614 if (!dev->resetting)
615 cm109_toggle_buzzer_async(dev);
616 return 0;
617
618 default:
619 return -EINVAL;
620 }
621}
622
623
624/******************************************************************************
625 * Linux interface and usb initialisation
626 *****************************************************************************/
627
628struct driver_info {
629 char *name;
630};
631
632static const struct driver_info info_cm109 = {
633 .name = "CM109 USB driver",
634};
635
636enum {
637 VENDOR_ID = 0x0d8c, /* C-Media Electronics */
638 PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */
639};
640
641/* table of devices that work with this driver */
642static const struct usb_device_id cm109_usb_table[] = {
643 {
644 .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
645 USB_DEVICE_ID_MATCH_INT_INFO,
646 .idVendor = VENDOR_ID,
647 .idProduct = PRODUCT_ID_CM109,
648 .bInterfaceClass = USB_CLASS_HID,
649 .bInterfaceSubClass = 0,
650 .bInterfaceProtocol = 0,
651 .driver_info = (kernel_ulong_t) &info_cm109
652 },
653 /* you can add more devices here with product ID 0x0008 - 0x000f */
654 { }
655};
656
657static void cm109_usb_cleanup(struct cm109_dev *dev)
658{
659 kfree(dev->ctl_req);
660 usb_free_coherent(dev->udev, USB_PKT_LEN, dev->ctl_data, dev->ctl_dma);
661 usb_free_coherent(dev->udev, USB_PKT_LEN, dev->irq_data, dev->irq_dma);
662
663 usb_free_urb(dev->urb_irq); /* parameter validation in core/urb */
664 usb_free_urb(dev->urb_ctl); /* parameter validation in core/urb */
665 kfree(dev);
666}
667
668static void cm109_usb_disconnect(struct usb_interface *interface)
669{
670 struct cm109_dev *dev = usb_get_intfdata(interface);
671
672 usb_set_intfdata(interface, NULL);
673 input_unregister_device(dev->idev);
674 cm109_usb_cleanup(dev);
675}
676
677static int cm109_usb_probe(struct usb_interface *intf,
678 const struct usb_device_id *id)
679{
680 struct usb_device *udev = interface_to_usbdev(intf);
681 struct driver_info *nfo = (struct driver_info *)id->driver_info;
682 struct usb_host_interface *interface;
683 struct usb_endpoint_descriptor *endpoint;
684 struct cm109_dev *dev;
685 struct input_dev *input_dev = NULL;
686 int ret, pipe, i;
687 int error = -ENOMEM;
688
689 interface = intf->cur_altsetting;
690
691 if (interface->desc.bNumEndpoints < 1)
692 return -ENODEV;
693
694 endpoint = &interface->endpoint[0].desc;
695
696 if (!usb_endpoint_is_int_in(endpoint))
697 return -ENODEV;
698
699 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
700 if (!dev)
701 return -ENOMEM;
702
703 spin_lock_init(&dev->ctl_submit_lock);
704 mutex_init(&dev->pm_mutex);
705
706 dev->udev = udev;
707 dev->intf = intf;
708
709 dev->idev = input_dev = input_allocate_device();
710 if (!input_dev)
711 goto err_out;
712
713 /* allocate usb buffers */
714 dev->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN,
715 GFP_KERNEL, &dev->irq_dma);
716 if (!dev->irq_data)
717 goto err_out;
718
719 dev->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN,
720 GFP_KERNEL, &dev->ctl_dma);
721 if (!dev->ctl_data)
722 goto err_out;
723
724 dev->ctl_req = kmalloc(sizeof(*(dev->ctl_req)), GFP_KERNEL);
725 if (!dev->ctl_req)
726 goto err_out;
727
728 /* allocate urb structures */
729 dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
730 if (!dev->urb_irq)
731 goto err_out;
732
733 dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
734 if (!dev->urb_ctl)
735 goto err_out;
736
737 /* get a handle to the interrupt data pipe */
738 pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
739 ret = usb_maxpacket(udev, pipe);
740 if (ret != USB_PKT_LEN)
741 dev_err(&intf->dev, "invalid payload size %d, expected %d\n",
742 ret, USB_PKT_LEN);
743
744 /* initialise irq urb */
745 usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data,
746 USB_PKT_LEN,
747 cm109_urb_irq_callback, dev, endpoint->bInterval);
748 dev->urb_irq->transfer_dma = dev->irq_dma;
749 dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
750 dev->urb_irq->dev = udev;
751
752 /* initialise ctl urb */
753 dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
754 USB_DIR_OUT;
755 dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION;
756 dev->ctl_req->wValue = cpu_to_le16(0x200);
757 dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
758 dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN);
759
760 usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
761 (void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN,
762 cm109_urb_ctl_callback, dev);
763 dev->urb_ctl->transfer_dma = dev->ctl_dma;
764 dev->urb_ctl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
765 dev->urb_ctl->dev = udev;
766
767 /* find out the physical bus location */
768 usb_make_path(udev, dev->phys, sizeof(dev->phys));
769 strlcat(dev->phys, "/input0", sizeof(dev->phys));
770
771 /* register settings for the input device */
772 input_dev->name = nfo->name;
773 input_dev->phys = dev->phys;
774 usb_to_input_id(udev, &input_dev->id);
775 input_dev->dev.parent = &intf->dev;
776
777 input_set_drvdata(input_dev, dev);
778 input_dev->open = cm109_input_open;
779 input_dev->close = cm109_input_close;
780 input_dev->event = cm109_input_ev;
781
782 input_dev->keycode = dev->keymap;
783 input_dev->keycodesize = sizeof(unsigned char);
784 input_dev->keycodemax = ARRAY_SIZE(dev->keymap);
785
786 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND);
787 input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
788
789 /* register available key events */
790 for (i = 0; i < KEYMAP_SIZE; i++) {
791 unsigned short k = keymap(i);
792 dev->keymap[i] = k;
793 __set_bit(k, input_dev->keybit);
794 }
795 __clear_bit(KEY_RESERVED, input_dev->keybit);
796
797 error = input_register_device(dev->idev);
798 if (error)
799 goto err_out;
800
801 usb_set_intfdata(intf, dev);
802
803 return 0;
804
805 err_out:
806 input_free_device(input_dev);
807 cm109_usb_cleanup(dev);
808 return error;
809}
810
811static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message)
812{
813 struct cm109_dev *dev = usb_get_intfdata(intf);
814
815 dev_info(&intf->dev, "cm109: usb_suspend (event=%d)\n", message.event);
816
817 guard(mutex)(&dev->pm_mutex);
818
819 cm109_stop_traffic(dev);
820
821 return 0;
822}
823
824static int cm109_usb_resume(struct usb_interface *intf)
825{
826 struct cm109_dev *dev = usb_get_intfdata(intf);
827
828 dev_info(&intf->dev, "cm109: usb_resume\n");
829
830 guard(mutex)(&dev->pm_mutex);
831
832 cm109_restore_state(dev);
833
834 return 0;
835}
836
837static int cm109_usb_pre_reset(struct usb_interface *intf)
838{
839 struct cm109_dev *dev = usb_get_intfdata(intf);
840
841 mutex_lock(&dev->pm_mutex);
842
843 /*
844 * Make sure input events don't try to toggle buzzer
845 * while we are resetting
846 */
847 dev->resetting = 1;
848 smp_wmb();
849
850 cm109_stop_traffic(dev);
851
852 return 0;
853}
854
855static int cm109_usb_post_reset(struct usb_interface *intf)
856{
857 struct cm109_dev *dev = usb_get_intfdata(intf);
858
859 dev->resetting = 0;
860 smp_wmb();
861
862 cm109_restore_state(dev);
863
864 mutex_unlock(&dev->pm_mutex);
865
866 return 0;
867}
868
869static struct usb_driver cm109_driver = {
870 .name = "cm109",
871 .probe = cm109_usb_probe,
872 .disconnect = cm109_usb_disconnect,
873 .suspend = cm109_usb_suspend,
874 .resume = cm109_usb_resume,
875 .reset_resume = cm109_usb_resume,
876 .pre_reset = cm109_usb_pre_reset,
877 .post_reset = cm109_usb_post_reset,
878 .id_table = cm109_usb_table,
879 .supports_autosuspend = 1,
880};
881
882static int __init cm109_select_keymap(void)
883{
884 /* Load the phone keymap */
885 if (!strcasecmp(phone, "kip1000")) {
886 keymap = keymap_kip1000;
887 printk(KERN_INFO KBUILD_MODNAME ": "
888 "Keymap for Komunikate KIP1000 phone loaded\n");
889 } else if (!strcasecmp(phone, "gtalk")) {
890 keymap = keymap_gtalk;
891 printk(KERN_INFO KBUILD_MODNAME ": "
892 "Keymap for Genius G-talk phone loaded\n");
893 } else if (!strcasecmp(phone, "usbph01")) {
894 keymap = keymap_usbph01;
895 printk(KERN_INFO KBUILD_MODNAME ": "
896 "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
897 } else if (!strcasecmp(phone, "atcom")) {
898 keymap = keymap_atcom;
899 printk(KERN_INFO KBUILD_MODNAME ": "
900 "Keymap for ATCom AU-100 phone loaded\n");
901 } else {
902 printk(KERN_ERR KBUILD_MODNAME ": "
903 "Unsupported phone: %s\n", phone);
904 return -EINVAL;
905 }
906
907 return 0;
908}
909
910static int __init cm109_init(void)
911{
912 int err;
913
914 err = cm109_select_keymap();
915 if (err)
916 return err;
917
918 err = usb_register(&cm109_driver);
919 if (err)
920 return err;
921
922 printk(KERN_INFO KBUILD_MODNAME ": "
923 DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n");
924
925 return 0;
926}
927
928static void __exit cm109_exit(void)
929{
930 usb_deregister(&cm109_driver);
931}
932
933module_init(cm109_init);
934module_exit(cm109_exit);
935
936MODULE_DEVICE_TABLE(usb, cm109_usb_table);
937
938MODULE_AUTHOR(DRIVER_AUTHOR);
939MODULE_DESCRIPTION(DRIVER_DESC);
940MODULE_LICENSE("GPL");