Loading...
1#include <linux/init.h>
2#include <linux/linkage.h>
3
4#include <asm/assembler.h>
5#include <asm/asm-offsets.h>
6#include <asm/errno.h>
7#include <asm/thread_info.h>
8#include <asm/v7m.h>
9
10@ Bad Abort numbers
11@ -----------------
12@
13#define BAD_PREFETCH 0
14#define BAD_DATA 1
15#define BAD_ADDREXCPTN 2
16#define BAD_IRQ 3
17#define BAD_UNDEFINSTR 4
18
19@
20@ Most of the stack format comes from struct pt_regs, but with
21@ the addition of 8 bytes for storing syscall args 5 and 6.
22@ This _must_ remain a multiple of 8 for EABI.
23@
24#define S_OFF 8
25
26/*
27 * The SWI code relies on the fact that R0 is at the bottom of the stack
28 * (due to slow/fast restore user regs).
29 */
30#if S_R0 != 0
31#error "Please fix"
32#endif
33
34 .macro zero_fp
35#ifdef CONFIG_FRAME_POINTER
36 mov fp, #0
37#endif
38 .endm
39
40 .macro alignment_trap, rtemp
41#ifdef CONFIG_ALIGNMENT_TRAP
42 ldr \rtemp, .LCcralign
43 ldr \rtemp, [\rtemp]
44 mcr p15, 0, \rtemp, c1, c0
45#endif
46 .endm
47
48#ifdef CONFIG_CPU_V7M
49/*
50 * ARMv7-M exception entry/exit macros.
51 *
52 * xPSR, ReturnAddress(), LR (R14), R12, R3, R2, R1, and R0 are
53 * automatically saved on the current stack (32 words) before
54 * switching to the exception stack (SP_main).
55 *
56 * If exception is taken while in user mode, SP_main is
57 * empty. Otherwise, SP_main is aligned to 64 bit automatically
58 * (CCR.STKALIGN set).
59 *
60 * Linux assumes that the interrupts are disabled when entering an
61 * exception handler and it may BUG if this is not the case. Interrupts
62 * are disabled during entry and reenabled in the exit macro.
63 *
64 * v7m_exception_slow_exit is used when returning from SVC or PendSV.
65 * When returning to kernel mode, we don't return from exception.
66 */
67 .macro v7m_exception_entry
68 @ determine the location of the registers saved by the core during
69 @ exception entry. Depending on the mode the cpu was in when the
70 @ exception happend that is either on the main or the process stack.
71 @ Bit 2 of EXC_RETURN stored in the lr register specifies which stack
72 @ was used.
73 tst lr, #EXC_RET_STACK_MASK
74 mrsne r12, psp
75 moveq r12, sp
76
77 @ we cannot rely on r0-r3 and r12 matching the value saved in the
78 @ exception frame because of tail-chaining. So these have to be
79 @ reloaded.
80 ldmia r12!, {r0-r3}
81
82 @ Linux expects to have irqs off. Do it here before taking stack space
83 cpsid i
84
85 sub sp, #S_FRAME_SIZE-S_IP
86 stmdb sp!, {r0-r11}
87
88 @ load saved r12, lr, return address and xPSR.
89 @ r0-r7 are used for signals and never touched from now on. Clobbering
90 @ r8-r12 is OK.
91 mov r9, r12
92 ldmia r9!, {r8, r10-r12}
93
94 @ calculate the original stack pointer value.
95 @ r9 currently points to the memory location just above the auto saved
96 @ xPSR.
97 @ The cpu might automatically 8-byte align the stack. Bit 9
98 @ of the saved xPSR specifies if stack aligning took place. In this case
99 @ another 32-bit value is included in the stack.
100
101 tst r12, V7M_xPSR_FRAMEPTRALIGN
102 addne r9, r9, #4
103
104 @ store saved r12 using str to have a register to hold the base for stm
105 str r8, [sp, #S_IP]
106 add r8, sp, #S_SP
107 @ store r13-r15, xPSR
108 stmia r8!, {r9-r12}
109 @ store old_r0
110 str r0, [r8]
111 .endm
112
113 /*
114 * PENDSV and SVCALL are configured to have the same exception
115 * priorities. As a kernel thread runs at SVCALL execution priority it
116 * can never be preempted and so we will never have to return to a
117 * kernel thread here.
118 */
119 .macro v7m_exception_slow_exit ret_r0
120 cpsid i
121 ldr lr, =EXC_RET_THREADMODE_PROCESSSTACK
122
123 @ read original r12, sp, lr, pc and xPSR
124 add r12, sp, #S_IP
125 ldmia r12, {r1-r5}
126
127 @ an exception frame is always 8-byte aligned. To tell the hardware if
128 @ the sp to be restored is aligned or not set bit 9 of the saved xPSR
129 @ accordingly.
130 tst r2, #4
131 subne r2, r2, #4
132 orrne r5, V7M_xPSR_FRAMEPTRALIGN
133 biceq r5, V7M_xPSR_FRAMEPTRALIGN
134
135 @ ensure bit 0 is cleared in the PC, otherwise behaviour is
136 @ unpredictable
137 bic r4, #1
138
139 @ write basic exception frame
140 stmdb r2!, {r1, r3-r5}
141 ldmia sp, {r1, r3-r5}
142 .if \ret_r0
143 stmdb r2!, {r0, r3-r5}
144 .else
145 stmdb r2!, {r1, r3-r5}
146 .endif
147
148 @ restore process sp
149 msr psp, r2
150
151 @ restore original r4-r11
152 ldmia sp!, {r0-r11}
153
154 @ restore main sp
155 add sp, sp, #S_FRAME_SIZE-S_IP
156
157 cpsie i
158 bx lr
159 .endm
160#endif /* CONFIG_CPU_V7M */
161
162 @
163 @ Store/load the USER SP and LR registers by switching to the SYS
164 @ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
165 @ available. Should only be called from SVC mode
166 @
167 .macro store_user_sp_lr, rd, rtemp, offset = 0
168 mrs \rtemp, cpsr
169 eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
170 msr cpsr_c, \rtemp @ switch to the SYS mode
171
172 str sp, [\rd, #\offset] @ save sp_usr
173 str lr, [\rd, #\offset + 4] @ save lr_usr
174
175 eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
176 msr cpsr_c, \rtemp @ switch back to the SVC mode
177 .endm
178
179 .macro load_user_sp_lr, rd, rtemp, offset = 0
180 mrs \rtemp, cpsr
181 eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
182 msr cpsr_c, \rtemp @ switch to the SYS mode
183
184 ldr sp, [\rd, #\offset] @ load sp_usr
185 ldr lr, [\rd, #\offset + 4] @ load lr_usr
186
187 eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
188 msr cpsr_c, \rtemp @ switch back to the SVC mode
189 .endm
190
191#ifndef CONFIG_THUMB2_KERNEL
192 .macro svc_exit, rpsr, irq = 0
193 .if \irq != 0
194 @ IRQs already off
195#ifdef CONFIG_TRACE_IRQFLAGS
196 @ The parent context IRQs must have been enabled to get here in
197 @ the first place, so there's no point checking the PSR I bit.
198 bl trace_hardirqs_on
199#endif
200 .else
201 @ IRQs off again before pulling preserved data off the stack
202 disable_irq_notrace
203#ifdef CONFIG_TRACE_IRQFLAGS
204 tst \rpsr, #PSR_I_BIT
205 bleq trace_hardirqs_on
206 tst \rpsr, #PSR_I_BIT
207 blne trace_hardirqs_off
208#endif
209 .endif
210 msr spsr_cxsf, \rpsr
211#if defined(CONFIG_CPU_V6)
212 ldr r0, [sp]
213 strex r1, r2, [sp] @ clear the exclusive monitor
214 ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr
215#elif defined(CONFIG_CPU_32v6K)
216 clrex @ clear the exclusive monitor
217 ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
218#else
219 ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
220#endif
221 .endm
222
223 .macro restore_user_regs, fast = 0, offset = 0
224 ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
225 ldr lr, [sp, #\offset + S_PC]! @ get pc
226 msr spsr_cxsf, r1 @ save in spsr_svc
227#if defined(CONFIG_CPU_V6)
228 strex r1, r2, [sp] @ clear the exclusive monitor
229#elif defined(CONFIG_CPU_32v6K)
230 clrex @ clear the exclusive monitor
231#endif
232 .if \fast
233 ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
234 .else
235 ldmdb sp, {r0 - lr}^ @ get calling r0 - lr
236 .endif
237 mov r0, r0 @ ARMv5T and earlier require a nop
238 @ after ldm {}^
239 add sp, sp, #S_FRAME_SIZE - S_PC
240 movs pc, lr @ return & move spsr_svc into cpsr
241 .endm
242
243 @
244 @ 32-bit wide "mov pc, reg"
245 @
246 .macro movw_pc, reg
247 mov pc, \reg
248 .endm
249#else /* CONFIG_THUMB2_KERNEL */
250 .macro svc_exit, rpsr, irq = 0
251 .if \irq != 0
252 @ IRQs already off
253#ifdef CONFIG_TRACE_IRQFLAGS
254 @ The parent context IRQs must have been enabled to get here in
255 @ the first place, so there's no point checking the PSR I bit.
256 bl trace_hardirqs_on
257#endif
258 .else
259 @ IRQs off again before pulling preserved data off the stack
260 disable_irq_notrace
261#ifdef CONFIG_TRACE_IRQFLAGS
262 tst \rpsr, #PSR_I_BIT
263 bleq trace_hardirqs_on
264 tst \rpsr, #PSR_I_BIT
265 blne trace_hardirqs_off
266#endif
267 .endif
268 ldr lr, [sp, #S_SP] @ top of the stack
269 ldrd r0, r1, [sp, #S_LR] @ calling lr and pc
270 clrex @ clear the exclusive monitor
271 stmdb lr!, {r0, r1, \rpsr} @ calling lr and rfe context
272 ldmia sp, {r0 - r12}
273 mov sp, lr
274 ldr lr, [sp], #4
275 rfeia sp!
276 .endm
277
278#ifdef CONFIG_CPU_V7M
279 /*
280 * Note we don't need to do clrex here as clearing the local monitor is
281 * part of each exception entry and exit sequence.
282 */
283 .macro restore_user_regs, fast = 0, offset = 0
284 .if \offset
285 add sp, #\offset
286 .endif
287 v7m_exception_slow_exit ret_r0 = \fast
288 .endm
289#else /* ifdef CONFIG_CPU_V7M */
290 .macro restore_user_regs, fast = 0, offset = 0
291 clrex @ clear the exclusive monitor
292 mov r2, sp
293 load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr
294 ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
295 ldr lr, [sp, #\offset + S_PC] @ get pc
296 add sp, sp, #\offset + S_SP
297 msr spsr_cxsf, r1 @ save in spsr_svc
298 .if \fast
299 ldmdb sp, {r1 - r12} @ get calling r1 - r12
300 .else
301 ldmdb sp, {r0 - r12} @ get calling r0 - r12
302 .endif
303 add sp, sp, #S_FRAME_SIZE - S_SP
304 movs pc, lr @ return & move spsr_svc into cpsr
305 .endm
306#endif /* ifdef CONFIG_CPU_V7M / else */
307
308 @
309 @ 32-bit wide "mov pc, reg"
310 @
311 .macro movw_pc, reg
312 mov pc, \reg
313 nop
314 .endm
315#endif /* !CONFIG_THUMB2_KERNEL */
316
317/*
318 * Context tracking subsystem. Used to instrument transitions
319 * between user and kernel mode.
320 */
321 .macro ct_user_exit, save = 1
322#ifdef CONFIG_CONTEXT_TRACKING
323 .if \save
324 stmdb sp!, {r0-r3, ip, lr}
325 bl context_tracking_user_exit
326 ldmia sp!, {r0-r3, ip, lr}
327 .else
328 bl context_tracking_user_exit
329 .endif
330#endif
331 .endm
332
333 .macro ct_user_enter, save = 1
334#ifdef CONFIG_CONTEXT_TRACKING
335 .if \save
336 stmdb sp!, {r0-r3, ip, lr}
337 bl context_tracking_user_enter
338 ldmia sp!, {r0-r3, ip, lr}
339 .else
340 bl context_tracking_user_enter
341 .endif
342#endif
343 .endm
344
345/*
346 * These are the registers used in the syscall handler, and allow us to
347 * have in theory up to 7 arguments to a function - r0 to r6.
348 *
349 * r7 is reserved for the system call number for thumb mode.
350 *
351 * Note that tbl == why is intentional.
352 *
353 * We must set at least "tsk" and "why" when calling ret_with_reschedule.
354 */
355scno .req r7 @ syscall number
356tbl .req r8 @ syscall table pointer
357why .req r8 @ Linux syscall (!= 0)
358tsk .req r9 @ current thread_info
1/* SPDX-License-Identifier: GPL-2.0 */
2#include <linux/init.h>
3#include <linux/linkage.h>
4
5#include <asm/assembler.h>
6#include <asm/asm-offsets.h>
7#include <asm/errno.h>
8#include <asm/thread_info.h>
9#include <asm/uaccess-asm.h>
10#include <asm/v7m.h>
11
12@ Bad Abort numbers
13@ -----------------
14@
15#define BAD_PREFETCH 0
16#define BAD_DATA 1
17#define BAD_ADDREXCPTN 2
18#define BAD_IRQ 3
19#define BAD_UNDEFINSTR 4
20
21@
22@ Most of the stack format comes from struct pt_regs, but with
23@ the addition of 8 bytes for storing syscall args 5 and 6.
24@ This _must_ remain a multiple of 8 for EABI.
25@
26#define S_OFF 8
27
28/*
29 * The SWI code relies on the fact that R0 is at the bottom of the stack
30 * (due to slow/fast restore user regs).
31 */
32#if S_R0 != 0
33#error "Please fix"
34#endif
35
36 .macro zero_fp
37#ifdef CONFIG_FRAME_POINTER
38 mov fp, #0
39#endif
40 .endm
41
42#ifdef CONFIG_ALIGNMENT_TRAP
43#define ATRAP(x...) x
44#else
45#define ATRAP(x...)
46#endif
47
48 .macro alignment_trap, rtmp1, rtmp2, label
49#ifdef CONFIG_ALIGNMENT_TRAP
50 mrc p15, 0, \rtmp2, c1, c0, 0
51 ldr_va \rtmp1, \label
52 teq \rtmp1, \rtmp2
53 mcrne p15, 0, \rtmp1, c1, c0, 0
54#endif
55 .endm
56
57#ifdef CONFIG_CPU_V7M
58/*
59 * ARMv7-M exception entry/exit macros.
60 *
61 * xPSR, ReturnAddress(), LR (R14), R12, R3, R2, R1, and R0 are
62 * automatically saved on the current stack (32 words) before
63 * switching to the exception stack (SP_main).
64 *
65 * If exception is taken while in user mode, SP_main is
66 * empty. Otherwise, SP_main is aligned to 64 bit automatically
67 * (CCR.STKALIGN set).
68 *
69 * Linux assumes that the interrupts are disabled when entering an
70 * exception handler and it may BUG if this is not the case. Interrupts
71 * are disabled during entry and reenabled in the exit macro.
72 *
73 * v7m_exception_slow_exit is used when returning from SVC or PendSV.
74 * When returning to kernel mode, we don't return from exception.
75 */
76 .macro v7m_exception_entry
77 @ determine the location of the registers saved by the core during
78 @ exception entry. Depending on the mode the cpu was in when the
79 @ exception happend that is either on the main or the process stack.
80 @ Bit 2 of EXC_RETURN stored in the lr register specifies which stack
81 @ was used.
82 tst lr, #EXC_RET_STACK_MASK
83 mrsne r12, psp
84 moveq r12, sp
85
86 @ we cannot rely on r0-r3 and r12 matching the value saved in the
87 @ exception frame because of tail-chaining. So these have to be
88 @ reloaded.
89 ldmia r12!, {r0-r3}
90
91 @ Linux expects to have irqs off. Do it here before taking stack space
92 cpsid i
93
94 sub sp, #PT_REGS_SIZE-S_IP
95 stmdb sp!, {r0-r11}
96
97 @ load saved r12, lr, return address and xPSR.
98 @ r0-r7 are used for signals and never touched from now on. Clobbering
99 @ r8-r12 is OK.
100 mov r9, r12
101 ldmia r9!, {r8, r10-r12}
102
103 @ calculate the original stack pointer value.
104 @ r9 currently points to the memory location just above the auto saved
105 @ xPSR.
106 @ The cpu might automatically 8-byte align the stack. Bit 9
107 @ of the saved xPSR specifies if stack aligning took place. In this case
108 @ another 32-bit value is included in the stack.
109
110 tst r12, V7M_xPSR_FRAMEPTRALIGN
111 addne r9, r9, #4
112
113 @ store saved r12 using str to have a register to hold the base for stm
114 str r8, [sp, #S_IP]
115 add r8, sp, #S_SP
116 @ store r13-r15, xPSR
117 stmia r8!, {r9-r12}
118 @ store old_r0
119 str r0, [r8]
120 .endm
121
122 /*
123 * PENDSV and SVCALL are configured to have the same exception
124 * priorities. As a kernel thread runs at SVCALL execution priority it
125 * can never be preempted and so we will never have to return to a
126 * kernel thread here.
127 */
128 .macro v7m_exception_slow_exit ret_r0
129 cpsid i
130 ldr lr, =exc_ret
131 ldr lr, [lr]
132
133 @ read original r12, sp, lr, pc and xPSR
134 add r12, sp, #S_IP
135 ldmia r12, {r1-r5}
136
137 @ an exception frame is always 8-byte aligned. To tell the hardware if
138 @ the sp to be restored is aligned or not set bit 9 of the saved xPSR
139 @ accordingly.
140 tst r2, #4
141 subne r2, r2, #4
142 orrne r5, V7M_xPSR_FRAMEPTRALIGN
143 biceq r5, V7M_xPSR_FRAMEPTRALIGN
144
145 @ ensure bit 0 is cleared in the PC, otherwise behaviour is
146 @ unpredictable
147 bic r4, #1
148
149 @ write basic exception frame
150 stmdb r2!, {r1, r3-r5}
151 ldmia sp, {r1, r3-r5}
152 .if \ret_r0
153 stmdb r2!, {r0, r3-r5}
154 .else
155 stmdb r2!, {r1, r3-r5}
156 .endif
157
158 @ restore process sp
159 msr psp, r2
160
161 @ restore original r4-r11
162 ldmia sp!, {r0-r11}
163
164 @ restore main sp
165 add sp, sp, #PT_REGS_SIZE-S_IP
166
167 cpsie i
168 bx lr
169 .endm
170#endif /* CONFIG_CPU_V7M */
171
172 @
173 @ Store/load the USER SP and LR registers by switching to the SYS
174 @ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
175 @ available. Should only be called from SVC mode
176 @
177 .macro store_user_sp_lr, rd, rtemp, offset = 0
178 mrs \rtemp, cpsr
179 eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
180 msr cpsr_c, \rtemp @ switch to the SYS mode
181
182 str sp, [\rd, #\offset] @ save sp_usr
183 str lr, [\rd, #\offset + 4] @ save lr_usr
184
185 eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
186 msr cpsr_c, \rtemp @ switch back to the SVC mode
187 .endm
188
189 .macro load_user_sp_lr, rd, rtemp, offset = 0
190 mrs \rtemp, cpsr
191 eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
192 msr cpsr_c, \rtemp @ switch to the SYS mode
193
194 ldr sp, [\rd, #\offset] @ load sp_usr
195 ldr lr, [\rd, #\offset + 4] @ load lr_usr
196
197 eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
198 msr cpsr_c, \rtemp @ switch back to the SVC mode
199 .endm
200
201
202 .macro svc_exit, rpsr, irq = 0
203 .if \irq != 0
204 @ IRQs already off
205#ifdef CONFIG_TRACE_IRQFLAGS
206 @ The parent context IRQs must have been enabled to get here in
207 @ the first place, so there's no point checking the PSR I bit.
208 bl trace_hardirqs_on
209#endif
210 .else
211 @ IRQs off again before pulling preserved data off the stack
212 disable_irq_notrace
213#ifdef CONFIG_TRACE_IRQFLAGS
214 tst \rpsr, #PSR_I_BIT
215 bleq trace_hardirqs_on
216 tst \rpsr, #PSR_I_BIT
217 blne trace_hardirqs_off
218#endif
219 .endif
220 uaccess_exit tsk, r0, r1
221
222#ifndef CONFIG_THUMB2_KERNEL
223 @ ARM mode SVC restore
224 msr spsr_cxsf, \rpsr
225#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
226 @ We must avoid clrex due to Cortex-A15 erratum #830321
227 sub r0, sp, #4 @ uninhabited address
228 strex r1, r2, [r0] @ clear the exclusive monitor
229#endif
230 ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
231#else
232 @ Thumb mode SVC restore
233 ldr lr, [sp, #S_SP] @ top of the stack
234 ldrd r0, r1, [sp, #S_LR] @ calling lr and pc
235
236 @ We must avoid clrex due to Cortex-A15 erratum #830321
237 strex r2, r1, [sp, #S_LR] @ clear the exclusive monitor
238
239 stmdb lr!, {r0, r1, \rpsr} @ calling lr and rfe context
240 ldmia sp, {r0 - r12}
241 mov sp, lr
242 ldr lr, [sp], #4
243 rfeia sp!
244#endif
245 .endm
246
247 @
248 @ svc_exit_via_fiq - like svc_exit but switches to FIQ mode before exit
249 @
250 @ This macro acts in a similar manner to svc_exit but switches to FIQ
251 @ mode to restore the final part of the register state.
252 @
253 @ We cannot use the normal svc_exit procedure because that would
254 @ clobber spsr_svc (FIQ could be delivered during the first few
255 @ instructions of vector_swi meaning its contents have not been
256 @ saved anywhere).
257 @
258 @ Note that, unlike svc_exit, this macro also does not allow a caller
259 @ supplied rpsr. This is because the FIQ exceptions are not re-entrant
260 @ and the handlers cannot call into the scheduler (meaning the value
261 @ on the stack remains correct).
262 @
263 .macro svc_exit_via_fiq
264 uaccess_exit tsk, r0, r1
265#ifndef CONFIG_THUMB2_KERNEL
266 @ ARM mode restore
267 mov r0, sp
268 ldmib r0, {r1 - r14} @ abort is deadly from here onward (it will
269 @ clobber state restored below)
270 msr cpsr_c, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT
271 add r8, r0, #S_PC
272 ldr r9, [r0, #S_PSR]
273 msr spsr_cxsf, r9
274 ldr r0, [r0, #S_R0]
275 ldmia r8, {pc}^
276#else
277 @ Thumb mode restore
278 add r0, sp, #S_R2
279 ldr lr, [sp, #S_LR]
280 ldr sp, [sp, #S_SP] @ abort is deadly from here onward (it will
281 @ clobber state restored below)
282 ldmia r0, {r2 - r12}
283 mov r1, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT
284 msr cpsr_c, r1
285 sub r0, #S_R2
286 add r8, r0, #S_PC
287 ldmia r0, {r0 - r1}
288 rfeia r8
289#endif
290 .endm
291
292
293 .macro restore_user_regs, fast = 0, offset = 0
294#if defined(CONFIG_CPU_32v6K) && \
295 (!defined(CONFIG_CPU_V6) || defined(CONFIG_SMP))
296#ifdef CONFIG_CPU_V6
297ALT_SMP(nop)
298ALT_UP_B(.L1_\@)
299#endif
300 @ The TLS register update is deferred until return to user space so we
301 @ can use it for other things while running in the kernel
302 mrc p15, 0, r1, c13, c0, 3 @ get current_thread_info pointer
303 ldr r1, [r1, #TI_TP_VALUE]
304 mcr p15, 0, r1, c13, c0, 3 @ set TLS register
305.L1_\@:
306#endif
307
308 uaccess_enable r1, isb=0
309#ifndef CONFIG_THUMB2_KERNEL
310 @ ARM mode restore
311 mov r2, sp
312 ldr r1, [r2, #\offset + S_PSR] @ get calling cpsr
313 ldr lr, [r2, #\offset + S_PC]! @ get pc
314 tst r1, #PSR_I_BIT | 0x0f
315 bne 1f
316 msr spsr_cxsf, r1 @ save in spsr_svc
317#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
318 @ We must avoid clrex due to Cortex-A15 erratum #830321
319 strex r1, r2, [r2] @ clear the exclusive monitor
320#endif
321 .if \fast
322 ldmdb r2, {r1 - lr}^ @ get calling r1 - lr
323 .else
324 ldmdb r2, {r0 - lr}^ @ get calling r0 - lr
325 .endif
326 mov r0, r0 @ ARMv5T and earlier require a nop
327 @ after ldm {}^
328 add sp, sp, #\offset + PT_REGS_SIZE
329 movs pc, lr @ return & move spsr_svc into cpsr
3301: bug "Returning to usermode but unexpected PSR bits set?", \@
331#elif defined(CONFIG_CPU_V7M)
332 @ V7M restore.
333 @ Note that we don't need to do clrex here as clearing the local
334 @ monitor is part of the exception entry and exit sequence.
335 .if \offset
336 add sp, #\offset
337 .endif
338 v7m_exception_slow_exit ret_r0 = \fast
339#else
340 @ Thumb mode restore
341 mov r2, sp
342 load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr
343 ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
344 ldr lr, [sp, #\offset + S_PC] @ get pc
345 add sp, sp, #\offset + S_SP
346 tst r1, #PSR_I_BIT | 0x0f
347 bne 1f
348 msr spsr_cxsf, r1 @ save in spsr_svc
349
350 @ We must avoid clrex due to Cortex-A15 erratum #830321
351 strex r1, r2, [sp] @ clear the exclusive monitor
352
353 .if \fast
354 ldmdb sp, {r1 - r12} @ get calling r1 - r12
355 .else
356 ldmdb sp, {r0 - r12} @ get calling r0 - r12
357 .endif
358 add sp, sp, #PT_REGS_SIZE - S_SP
359 movs pc, lr @ return & move spsr_svc into cpsr
3601: bug "Returning to usermode but unexpected PSR bits set?", \@
361#endif /* !CONFIG_THUMB2_KERNEL */
362 .endm
363
364/*
365 * Context tracking subsystem. Used to instrument transitions
366 * between user and kernel mode.
367 */
368 .macro ct_user_exit, save = 1
369#ifdef CONFIG_CONTEXT_TRACKING_USER
370 .if \save
371 stmdb sp!, {r0-r3, ip, lr}
372 bl user_exit_callable
373 ldmia sp!, {r0-r3, ip, lr}
374 .else
375 bl user_exit_callable
376 .endif
377#endif
378 .endm
379
380 .macro ct_user_enter, save = 1
381#ifdef CONFIG_CONTEXT_TRACKING_USER
382 .if \save
383 stmdb sp!, {r0-r3, ip, lr}
384 bl user_enter_callable
385 ldmia sp!, {r0-r3, ip, lr}
386 .else
387 bl user_enter_callable
388 .endif
389#endif
390 .endm
391
392 .macro invoke_syscall, table, nr, tmp, ret, reload=0
393#ifdef CONFIG_CPU_SPECTRE
394 mov \tmp, \nr
395 cmp \tmp, #NR_syscalls @ check upper syscall limit
396 movcs \tmp, #0
397 csdb
398 badr lr, \ret @ return address
399 .if \reload
400 add r1, sp, #S_R0 + S_OFF @ pointer to regs
401 ldmiacc r1, {r0 - r6} @ reload r0-r6
402 stmiacc sp, {r4, r5} @ update stack arguments
403 .endif
404 ldrcc pc, [\table, \tmp, lsl #2] @ call sys_* routine
405#else
406 cmp \nr, #NR_syscalls @ check upper syscall limit
407 badr lr, \ret @ return address
408 .if \reload
409 add r1, sp, #S_R0 + S_OFF @ pointer to regs
410 ldmiacc r1, {r0 - r6} @ reload r0-r6
411 stmiacc sp, {r4, r5} @ update stack arguments
412 .endif
413 ldrcc pc, [\table, \nr, lsl #2] @ call sys_* routine
414#endif
415 .endm
416
417/*
418 * These are the registers used in the syscall handler, and allow us to
419 * have in theory up to 7 arguments to a function - r0 to r6.
420 *
421 * r7 is reserved for the system call number for thumb mode.
422 *
423 * Note that tbl == why is intentional.
424 *
425 * We must set at least "tsk" and "why" when calling ret_with_reschedule.
426 */
427scno .req r7 @ syscall number
428tbl .req r8 @ syscall table pointer
429why .req r8 @ Linux syscall (!= 0)
430tsk .req r9 @ current thread_info
431
432 .macro do_overflow_check, frame_size:req
433#ifdef CONFIG_VMAP_STACK
434 @
435 @ Test whether the SP has overflowed. Task and IRQ stacks are aligned
436 @ so that SP & BIT(THREAD_SIZE_ORDER + PAGE_SHIFT) should always be
437 @ zero.
438 @
439ARM( tst sp, #1 << (THREAD_SIZE_ORDER + PAGE_SHIFT) )
440THUMB( tst r1, #1 << (THREAD_SIZE_ORDER + PAGE_SHIFT) )
441THUMB( it ne )
442 bne .Lstack_overflow_check\@
443
444 .pushsection .text
445.Lstack_overflow_check\@:
446 @
447 @ The stack pointer is not pointing to a valid vmap'ed stack, but it
448 @ may be pointing into the linear map instead, which may happen if we
449 @ are already running from the overflow stack. We cannot detect overflow
450 @ in such cases so just carry on.
451 @
452 str ip, [r0, #12] @ Stash IP on the mode stack
453 ldr_va ip, high_memory @ Start of VMALLOC space
454ARM( cmp sp, ip ) @ SP in vmalloc space?
455THUMB( cmp r1, ip )
456THUMB( itt lo )
457 ldrlo ip, [r0, #12] @ Restore IP
458 blo .Lout\@ @ Carry on
459
460THUMB( sub r1, sp, r1 ) @ Restore original R1
461THUMB( sub sp, r1 ) @ Restore original SP
462 add sp, sp, #\frame_size @ Undo svc_entry's SP change
463 b __bad_stack @ Handle VMAP stack overflow
464 .popsection
465.Lout\@:
466#endif
467 .endm