Loading...
1/*
2 * PCI Express Hot Plug Controller Driver
3 *
4 * Copyright (C) 1995,2001 Compaq Computer Corporation
5 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
6 * Copyright (C) 2001 IBM Corp.
7 * Copyright (C) 2003-2004 Intel Corporation
8 *
9 * All rights reserved.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or (at
14 * your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
19 * NON INFRINGEMENT. See the GNU General Public License for more
20 * details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 *
26 * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
27 *
28 */
29
30#include <linux/module.h>
31#include <linux/kernel.h>
32#include <linux/types.h>
33#include <linux/pci.h>
34#include "../pci.h"
35#include "pciehp.h"
36
37int pciehp_configure_device(struct slot *p_slot)
38{
39 struct pci_dev *dev;
40 struct pci_dev *bridge = p_slot->ctrl->pcie->port;
41 struct pci_bus *parent = bridge->subordinate;
42 int num, ret = 0;
43 struct controller *ctrl = p_slot->ctrl;
44
45 pci_lock_rescan_remove();
46
47 dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
48 if (dev) {
49 ctrl_err(ctrl, "Device %s already exists "
50 "at %04x:%02x:00, cannot hot-add\n", pci_name(dev),
51 pci_domain_nr(parent), parent->number);
52 pci_dev_put(dev);
53 ret = -EEXIST;
54 goto out;
55 }
56
57 num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
58 if (num == 0) {
59 ctrl_err(ctrl, "No new device found\n");
60 ret = -ENODEV;
61 goto out;
62 }
63
64 list_for_each_entry(dev, &parent->devices, bus_list)
65 if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
66 (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS))
67 pci_hp_add_bridge(dev);
68
69 pci_assign_unassigned_bridge_resources(bridge);
70
71 list_for_each_entry(dev, &parent->devices, bus_list) {
72 if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
73 continue;
74
75 pci_configure_slot(dev);
76 }
77
78 pci_bus_add_devices(parent);
79
80 out:
81 pci_unlock_rescan_remove();
82 return ret;
83}
84
85int pciehp_unconfigure_device(struct slot *p_slot)
86{
87 int rc = 0;
88 u8 bctl = 0;
89 u8 presence = 0;
90 struct pci_dev *dev, *temp;
91 struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
92 u16 command;
93 struct controller *ctrl = p_slot->ctrl;
94
95 ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n",
96 __func__, pci_domain_nr(parent), parent->number);
97 pciehp_get_adapter_status(p_slot, &presence);
98
99 pci_lock_rescan_remove();
100
101 /*
102 * Stopping an SR-IOV PF device removes all the associated VFs,
103 * which will update the bus->devices list and confuse the
104 * iterator. Therefore, iterate in reverse so we remove the VFs
105 * first, then the PF. We do the same in pci_stop_bus_device().
106 */
107 list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
108 bus_list) {
109 pci_dev_get(dev);
110 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
111 pci_read_config_byte(dev, PCI_BRIDGE_CONTROL, &bctl);
112 if (bctl & PCI_BRIDGE_CTL_VGA) {
113 ctrl_err(ctrl,
114 "Cannot remove display device %s\n",
115 pci_name(dev));
116 pci_dev_put(dev);
117 rc = -EINVAL;
118 break;
119 }
120 }
121 pci_stop_and_remove_bus_device(dev);
122 /*
123 * Ensure that no new Requests will be generated from
124 * the device.
125 */
126 if (presence) {
127 pci_read_config_word(dev, PCI_COMMAND, &command);
128 command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
129 command |= PCI_COMMAND_INTX_DISABLE;
130 pci_write_config_word(dev, PCI_COMMAND, command);
131 }
132 pci_dev_put(dev);
133 }
134
135 pci_unlock_rescan_remove();
136 return rc;
137}
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * PCI Express Hot Plug Controller Driver
4 *
5 * Copyright (C) 1995,2001 Compaq Computer Corporation
6 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
7 * Copyright (C) 2001 IBM Corp.
8 * Copyright (C) 2003-2004 Intel Corporation
9 *
10 * All rights reserved.
11 *
12 * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
13 *
14 */
15
16#define dev_fmt(fmt) "pciehp: " fmt
17
18#include <linux/kernel.h>
19#include <linux/types.h>
20#include <linux/pci.h>
21#include "../pci.h"
22#include "pciehp.h"
23
24/**
25 * pciehp_configure_device() - enumerate PCI devices below a hotplug bridge
26 * @ctrl: PCIe hotplug controller
27 *
28 * Enumerate PCI devices below a hotplug bridge and add them to the system.
29 * Return 0 on success, %-EEXIST if the devices are already enumerated or
30 * %-ENODEV if enumeration failed.
31 */
32int pciehp_configure_device(struct controller *ctrl)
33{
34 struct pci_dev *dev;
35 struct pci_dev *bridge = ctrl->pcie->port;
36 struct pci_bus *parent = bridge->subordinate;
37 int num, ret = 0;
38
39 pci_lock_rescan_remove();
40
41 dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
42 if (dev) {
43 /*
44 * The device is already there. Either configured by the
45 * boot firmware or a previous hotplug event.
46 */
47 ctrl_dbg(ctrl, "Device %s already exists at %04x:%02x:00, skipping hot-add\n",
48 pci_name(dev), pci_domain_nr(parent), parent->number);
49 pci_dev_put(dev);
50 ret = -EEXIST;
51 goto out;
52 }
53
54 num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
55 if (num == 0) {
56 ctrl_err(ctrl, "No new device found\n");
57 ret = -ENODEV;
58 goto out;
59 }
60
61 for_each_pci_bridge(dev, parent)
62 pci_hp_add_bridge(dev);
63
64 pci_assign_unassigned_bridge_resources(bridge);
65 pcie_bus_configure_settings(parent);
66 pci_bus_add_devices(parent);
67
68 out:
69 pci_unlock_rescan_remove();
70 return ret;
71}
72
73/**
74 * pciehp_unconfigure_device() - remove PCI devices below a hotplug bridge
75 * @ctrl: PCIe hotplug controller
76 * @presence: whether the card is still present in the slot;
77 * true for safe removal via sysfs or an Attention Button press,
78 * false for surprise removal
79 *
80 * Unbind PCI devices below a hotplug bridge from their drivers and remove
81 * them from the system. Safely removed devices are quiesced. Surprise
82 * removed devices are marked as such to prevent further accesses.
83 */
84void pciehp_unconfigure_device(struct controller *ctrl, bool presence)
85{
86 struct pci_dev *dev, *temp;
87 struct pci_bus *parent = ctrl->pcie->port->subordinate;
88 u16 command;
89
90 ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n",
91 __func__, pci_domain_nr(parent), parent->number);
92
93 if (!presence)
94 pci_walk_bus(parent, pci_dev_set_disconnected, NULL);
95
96 pci_lock_rescan_remove();
97
98 /*
99 * Stopping an SR-IOV PF device removes all the associated VFs,
100 * which will update the bus->devices list and confuse the
101 * iterator. Therefore, iterate in reverse so we remove the VFs
102 * first, then the PF. We do the same in pci_stop_bus_device().
103 */
104 list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
105 bus_list) {
106 pci_dev_get(dev);
107 pci_stop_and_remove_bus_device(dev);
108 /*
109 * Ensure that no new Requests will be generated from
110 * the device.
111 */
112 if (presence) {
113 pci_read_config_word(dev, PCI_COMMAND, &command);
114 command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
115 command |= PCI_COMMAND_INTX_DISABLE;
116 pci_write_config_word(dev, PCI_COMMAND, command);
117 }
118 pci_dev_put(dev);
119 }
120
121 pci_unlock_rescan_remove();
122}