Loading...
1/**************************************************************************
2 * Initio 9100 device driver for Linux.
3 *
4 * Copyright (c) 1994-1998 Initio Corporation
5 * Copyright (c) 1998 Bas Vermeulen <bvermeul@blackstar.xs4all.nl>
6 * Copyright (c) 2004 Christoph Hellwig <hch@lst.de>
7 * Copyright (c) 2007 Red Hat
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2, or (at your option)
12 * any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; see the file COPYING. If not, write to
21 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
22 *
23 *
24 *************************************************************************
25 *
26 * DESCRIPTION:
27 *
28 * This is the Linux low-level SCSI driver for Initio INI-9X00U/UW SCSI host
29 * adapters
30 *
31 * 08/06/97 hc - v1.01h
32 * - Support inic-940 and inic-935
33 * 09/26/97 hc - v1.01i
34 * - Make correction from J.W. Schultz suggestion
35 * 10/13/97 hc - Support reset function
36 * 10/21/97 hc - v1.01j
37 * - Support 32 LUN (SCSI 3)
38 * 01/14/98 hc - v1.01k
39 * - Fix memory allocation problem
40 * 03/04/98 hc - v1.01l
41 * - Fix tape rewind which will hang the system problem
42 * - Set can_queue to initio_num_scb
43 * 06/25/98 hc - v1.01m
44 * - Get it work for kernel version >= 2.1.75
45 * - Dynamic assign SCSI bus reset holding time in initio_init()
46 * 07/02/98 hc - v1.01n
47 * - Support 0002134A
48 * 08/07/98 hc - v1.01o
49 * - Change the initio_abort_srb routine to use scsi_done. <01>
50 * 09/07/98 hl - v1.02
51 * - Change the INI9100U define and proc_dir_entry to
52 * reflect the newer Kernel 2.1.118, but the v1.o1o
53 * should work with Kernel 2.1.118.
54 * 09/20/98 wh - v1.02a
55 * - Support Abort command.
56 * - Handle reset routine.
57 * 09/21/98 hl - v1.03
58 * - remove comments.
59 * 12/09/98 bv - v1.03a
60 * - Removed unused code
61 * 12/13/98 bv - v1.03b
62 * - Remove cli() locking for kernels >= 2.1.95. This uses
63 * spinlocks to serialize access to the pSRB_head and
64 * pSRB_tail members of the HCS structure.
65 * 09/01/99 bv - v1.03d
66 * - Fixed a deadlock problem in SMP.
67 * 21/01/99 bv - v1.03e
68 * - Add support for the Domex 3192U PCI SCSI
69 * This is a slightly modified patch by
70 * Brian Macy <bmacy@sunshinecomputing.com>
71 * 22/02/99 bv - v1.03f
72 * - Didn't detect the INIC-950 in 2.0.x correctly.
73 * Now fixed.
74 * 05/07/99 bv - v1.03g
75 * - Changed the assumption that HZ = 100
76 * 10/17/03 mc - v1.04
77 * - added new DMA API support
78 * 06/01/04 jmd - v1.04a
79 * - Re-add reset_bus support
80 **************************************************************************/
81
82#include <linux/module.h>
83#include <linux/errno.h>
84#include <linux/delay.h>
85#include <linux/pci.h>
86#include <linux/init.h>
87#include <linux/blkdev.h>
88#include <linux/spinlock.h>
89#include <linux/stat.h>
90#include <linux/kernel.h>
91#include <linux/proc_fs.h>
92#include <linux/string.h>
93#include <linux/interrupt.h>
94#include <linux/ioport.h>
95#include <linux/slab.h>
96#include <linux/jiffies.h>
97#include <linux/dma-mapping.h>
98#include <asm/io.h>
99
100#include <scsi/scsi.h>
101#include <scsi/scsi_cmnd.h>
102#include <scsi/scsi_device.h>
103#include <scsi/scsi_host.h>
104#include <scsi/scsi_tcq.h>
105
106#include "initio.h"
107
108#define SENSE_SIZE 14
109
110#define i91u_MAXQUEUE 2
111#define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a"
112
113#define I950_DEVICE_ID 0x9500 /* Initio's inic-950 product ID */
114#define I940_DEVICE_ID 0x9400 /* Initio's inic-940 product ID */
115#define I935_DEVICE_ID 0x9401 /* Initio's inic-935 product ID */
116#define I920_DEVICE_ID 0x0002 /* Initio's other product ID */
117
118#ifdef DEBUG_i91u
119static unsigned int i91u_debug = DEBUG_DEFAULT;
120#endif
121
122static int initio_tag_enable = 1;
123
124#ifdef DEBUG_i91u
125static int setup_debug = 0;
126#endif
127
128static void i91uSCBPost(u8 * pHcb, u8 * pScb);
129
130/* PCI Devices supported by this driver */
131static struct pci_device_id i91u_pci_devices[] = {
132 { PCI_VENDOR_ID_INIT, I950_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
133 { PCI_VENDOR_ID_INIT, I940_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
134 { PCI_VENDOR_ID_INIT, I935_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
135 { PCI_VENDOR_ID_INIT, I920_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
136 { PCI_VENDOR_ID_DOMEX, I920_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
137 { }
138};
139MODULE_DEVICE_TABLE(pci, i91u_pci_devices);
140
141#define DEBUG_INTERRUPT 0
142#define DEBUG_QUEUE 0
143#define DEBUG_STATE 0
144#define INT_DISC 0
145
146/*--- forward references ---*/
147static struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun);
148static struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host);
149
150static int tulip_main(struct initio_host * host);
151
152static int initio_next_state(struct initio_host * host);
153static int initio_state_1(struct initio_host * host);
154static int initio_state_2(struct initio_host * host);
155static int initio_state_3(struct initio_host * host);
156static int initio_state_4(struct initio_host * host);
157static int initio_state_5(struct initio_host * host);
158static int initio_state_6(struct initio_host * host);
159static int initio_state_7(struct initio_host * host);
160static int initio_xfer_data_in(struct initio_host * host);
161static int initio_xfer_data_out(struct initio_host * host);
162static int initio_xpad_in(struct initio_host * host);
163static int initio_xpad_out(struct initio_host * host);
164static int initio_status_msg(struct initio_host * host);
165
166static int initio_msgin(struct initio_host * host);
167static int initio_msgin_sync(struct initio_host * host);
168static int initio_msgin_accept(struct initio_host * host);
169static int initio_msgout_reject(struct initio_host * host);
170static int initio_msgin_extend(struct initio_host * host);
171
172static int initio_msgout_ide(struct initio_host * host);
173static int initio_msgout_abort_targ(struct initio_host * host);
174static int initio_msgout_abort_tag(struct initio_host * host);
175
176static int initio_bus_device_reset(struct initio_host * host);
177static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb);
178static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb);
179static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb);
180static int int_initio_busfree(struct initio_host * host);
181static int int_initio_scsi_rst(struct initio_host * host);
182static int int_initio_bad_seq(struct initio_host * host);
183static int int_initio_resel(struct initio_host * host);
184static int initio_sync_done(struct initio_host * host);
185static int wdtr_done(struct initio_host * host);
186static int wait_tulip(struct initio_host * host);
187static int initio_wait_done_disc(struct initio_host * host);
188static int initio_wait_disc(struct initio_host * host);
189static void tulip_scsi(struct initio_host * host);
190static int initio_post_scsi_rst(struct initio_host * host);
191
192static void initio_se2_ew_en(unsigned long base);
193static void initio_se2_ew_ds(unsigned long base);
194static int initio_se2_rd_all(unsigned long base);
195static void initio_se2_update_all(unsigned long base); /* setup default pattern */
196static void initio_read_eeprom(unsigned long base);
197
198/* ---- INTERNAL VARIABLES ---- */
199
200static NVRAM i91unvram;
201static NVRAM *i91unvramp;
202
203static u8 i91udftNvRam[64] =
204{
205 /*----------- header -----------*/
206 0x25, 0xc9, /* Signature */
207 0x40, /* Size */
208 0x01, /* Revision */
209 /* -- Host Adapter Structure -- */
210 0x95, /* ModelByte0 */
211 0x00, /* ModelByte1 */
212 0x00, /* ModelInfo */
213 0x01, /* NumOfCh */
214 NBC1_DEFAULT, /* BIOSConfig1 */
215 0, /* BIOSConfig2 */
216 0, /* HAConfig1 */
217 0, /* HAConfig2 */
218 /* SCSI channel 0 and target Structure */
219 7, /* SCSIid */
220 NCC1_DEFAULT, /* SCSIconfig1 */
221 0, /* SCSIconfig2 */
222 0x10, /* NumSCSItarget */
223
224 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
225 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
226 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
227 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
228
229 /* SCSI channel 1 and target Structure */
230 7, /* SCSIid */
231 NCC1_DEFAULT, /* SCSIconfig1 */
232 0, /* SCSIconfig2 */
233 0x10, /* NumSCSItarget */
234
235 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
236 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
237 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
238 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
239 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
240 0, 0}; /* - CheckSum - */
241
242
243static u8 initio_rate_tbl[8] = /* fast 20 */
244{
245 /* nanosecond divide by 4 */
246 12, /* 50ns, 20M */
247 18, /* 75ns, 13.3M */
248 25, /* 100ns, 10M */
249 31, /* 125ns, 8M */
250 37, /* 150ns, 6.6M */
251 43, /* 175ns, 5.7M */
252 50, /* 200ns, 5M */
253 62 /* 250ns, 4M */
254};
255
256static void initio_do_pause(unsigned amount)
257{
258 /* Pause for amount jiffies */
259 unsigned long the_time = jiffies + amount;
260
261 while (time_before_eq(jiffies, the_time))
262 cpu_relax();
263}
264
265/*-- forward reference --*/
266
267/******************************************************************
268 Input: instruction for Serial E2PROM
269
270 EX: se2_rd(0 call se2_instr() to send address and read command
271
272 StartBit OP_Code Address Data
273 --------- -------- ------------------ -------
274 1 1 , 0 A5,A4,A3,A2,A1,A0 D15-D0
275
276 +-----------------------------------------------------
277 |
278 CS -----+
279 +--+ +--+ +--+ +--+ +--+
280 ^ | ^ | ^ | ^ | ^ |
281 | | | | | | | | | |
282 CLK -------+ +--+ +--+ +--+ +--+ +--
283 (leading edge trigger)
284
285 +--1-----1--+
286 | SB OP | OP A5 A4
287 DI ----+ +--0------------------
288 (address and cmd sent to nvram)
289
290 -------------------------------------------+
291 |
292 DO +---
293 (data sent from nvram)
294
295
296******************************************************************/
297
298/**
299 * initio_se2_instr - bitbang an instruction
300 * @base: Base of InitIO controller
301 * @instr: Instruction for serial E2PROM
302 *
303 * Bitbang an instruction out to the serial E2Prom
304 */
305
306static void initio_se2_instr(unsigned long base, u8 instr)
307{
308 int i;
309 u8 b;
310
311 outb(SE2CS | SE2DO, base + TUL_NVRAM); /* cs+start bit */
312 udelay(30);
313 outb(SE2CS | SE2CLK | SE2DO, base + TUL_NVRAM); /* +CLK */
314 udelay(30);
315
316 for (i = 0; i < 8; i++) {
317 if (instr & 0x80)
318 b = SE2CS | SE2DO; /* -CLK+dataBit */
319 else
320 b = SE2CS; /* -CLK */
321 outb(b, base + TUL_NVRAM);
322 udelay(30);
323 outb(b | SE2CLK, base + TUL_NVRAM); /* +CLK */
324 udelay(30);
325 instr <<= 1;
326 }
327 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
328 udelay(30);
329}
330
331
332/**
333 * initio_se2_ew_en - Enable erase/write
334 * @base: Base address of InitIO controller
335 *
336 * Enable erase/write state of serial EEPROM
337 */
338void initio_se2_ew_en(unsigned long base)
339{
340 initio_se2_instr(base, 0x30); /* EWEN */
341 outb(0, base + TUL_NVRAM); /* -CS */
342 udelay(30);
343}
344
345
346/**
347 * initio_se2_ew_ds - Disable erase/write
348 * @base: Base address of InitIO controller
349 *
350 * Disable erase/write state of serial EEPROM
351 */
352void initio_se2_ew_ds(unsigned long base)
353{
354 initio_se2_instr(base, 0); /* EWDS */
355 outb(0, base + TUL_NVRAM); /* -CS */
356 udelay(30);
357}
358
359
360/**
361 * initio_se2_rd - read E2PROM word
362 * @base: Base of InitIO controller
363 * @addr: Address of word in E2PROM
364 *
365 * Read a word from the NV E2PROM device
366 */
367static u16 initio_se2_rd(unsigned long base, u8 addr)
368{
369 u8 instr, rb;
370 u16 val = 0;
371 int i;
372
373 instr = (u8) (addr | 0x80);
374 initio_se2_instr(base, instr); /* READ INSTR */
375
376 for (i = 15; i >= 0; i--) {
377 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
378 udelay(30);
379 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
380
381 /* sample data after the following edge of clock */
382 rb = inb(base + TUL_NVRAM);
383 rb &= SE2DI;
384 val += (rb << i);
385 udelay(30); /* 6/20/95 */
386 }
387
388 outb(0, base + TUL_NVRAM); /* no chip select */
389 udelay(30);
390 return val;
391}
392
393/**
394 * initio_se2_wr - read E2PROM word
395 * @base: Base of InitIO controller
396 * @addr: Address of word in E2PROM
397 * @val: Value to write
398 *
399 * Write a word to the NV E2PROM device. Used when recovering from
400 * a problem with the NV.
401 */
402static void initio_se2_wr(unsigned long base, u8 addr, u16 val)
403{
404 u8 rb;
405 u8 instr;
406 int i;
407
408 instr = (u8) (addr | 0x40);
409 initio_se2_instr(base, instr); /* WRITE INSTR */
410 for (i = 15; i >= 0; i--) {
411 if (val & 0x8000)
412 outb(SE2CS | SE2DO, base + TUL_NVRAM); /* -CLK+dataBit 1 */
413 else
414 outb(SE2CS, base + TUL_NVRAM); /* -CLK+dataBit 0 */
415 udelay(30);
416 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
417 udelay(30);
418 val <<= 1;
419 }
420 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
421 udelay(30);
422 outb(0, base + TUL_NVRAM); /* -CS */
423 udelay(30);
424
425 outb(SE2CS, base + TUL_NVRAM); /* +CS */
426 udelay(30);
427
428 for (;;) {
429 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
430 udelay(30);
431 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
432 udelay(30);
433 if ((rb = inb(base + TUL_NVRAM)) & SE2DI)
434 break; /* write complete */
435 }
436 outb(0, base + TUL_NVRAM); /* -CS */
437}
438
439/**
440 * initio_se2_rd_all - read hostadapter NV configuration
441 * @base: Base address of InitIO controller
442 *
443 * Reads the E2PROM data into main memory. Ensures that the checksum
444 * and header marker are valid. Returns 1 on success -1 on error.
445 */
446
447static int initio_se2_rd_all(unsigned long base)
448{
449 int i;
450 u16 chksum = 0;
451 u16 *np;
452
453 i91unvramp = &i91unvram;
454 np = (u16 *) i91unvramp;
455 for (i = 0; i < 32; i++)
456 *np++ = initio_se2_rd(base, i);
457
458 /* Is signature "ini" ok ? */
459 if (i91unvramp->NVM_Signature != INI_SIGNATURE)
460 return -1;
461 /* Is ckecksum ok ? */
462 np = (u16 *) i91unvramp;
463 for (i = 0; i < 31; i++)
464 chksum += *np++;
465 if (i91unvramp->NVM_CheckSum != chksum)
466 return -1;
467 return 1;
468}
469
470/**
471 * initio_se2_update_all - Update E2PROM
472 * @base: Base of InitIO controller
473 *
474 * Update the E2PROM by wrting any changes into the E2PROM
475 * chip, rewriting the checksum.
476 */
477static void initio_se2_update_all(unsigned long base)
478{ /* setup default pattern */
479 int i;
480 u16 chksum = 0;
481 u16 *np, *np1;
482
483 i91unvramp = &i91unvram;
484 /* Calculate checksum first */
485 np = (u16 *) i91udftNvRam;
486 for (i = 0; i < 31; i++)
487 chksum += *np++;
488 *np = chksum;
489 initio_se2_ew_en(base); /* Enable write */
490
491 np = (u16 *) i91udftNvRam;
492 np1 = (u16 *) i91unvramp;
493 for (i = 0; i < 32; i++, np++, np1++) {
494 if (*np != *np1)
495 initio_se2_wr(base, i, *np);
496 }
497 initio_se2_ew_ds(base); /* Disable write */
498}
499
500/**
501 * initio_read_eeprom - Retrieve configuration
502 * @base: Base of InitIO Host Adapter
503 *
504 * Retrieve the host adapter configuration data from E2Prom. If the
505 * data is invalid then the defaults are used and are also restored
506 * into the E2PROM. This forms the access point for the SCSI driver
507 * into the E2PROM layer, the other functions for the E2PROM are all
508 * internal use.
509 *
510 * Must be called single threaded, uses a shared global area.
511 */
512
513static void initio_read_eeprom(unsigned long base)
514{
515 u8 gctrl;
516
517 i91unvramp = &i91unvram;
518 /* Enable EEProm programming */
519 gctrl = inb(base + TUL_GCTRL);
520 outb(gctrl | TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL);
521 if (initio_se2_rd_all(base) != 1) {
522 initio_se2_update_all(base); /* setup default pattern */
523 initio_se2_rd_all(base); /* load again */
524 }
525 /* Disable EEProm programming */
526 gctrl = inb(base + TUL_GCTRL);
527 outb(gctrl & ~TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL);
528}
529
530/**
531 * initio_stop_bm - stop bus master
532 * @host: InitIO we are stopping
533 *
534 * Stop any pending DMA operation, aborting the DMA if necessary
535 */
536
537static void initio_stop_bm(struct initio_host * host)
538{
539
540 if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */
541 outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd);
542 /* wait Abort DMA xfer done */
543 while ((inb(host->addr + TUL_Int) & XABT) == 0)
544 cpu_relax();
545 }
546 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
547}
548
549/**
550 * initio_reset_scsi - Reset SCSI host controller
551 * @host: InitIO host to reset
552 * @seconds: Recovery time
553 *
554 * Perform a full reset of the SCSI subsystem.
555 */
556
557static int initio_reset_scsi(struct initio_host * host, int seconds)
558{
559 outb(TSC_RST_BUS, host->addr + TUL_SCtrl0);
560
561 while (!((host->jsint = inb(host->addr + TUL_SInt)) & TSS_SCSIRST_INT))
562 cpu_relax();
563
564 /* reset tulip chip */
565 outb(0, host->addr + TUL_SSignal);
566
567 /* Stall for a while, wait for target's firmware ready,make it 2 sec ! */
568 /* SONY 5200 tape drive won't work if only stall for 1 sec */
569 /* FIXME: this is a very long busy wait right now */
570 initio_do_pause(seconds * HZ);
571
572 inb(host->addr + TUL_SInt);
573 return SCSI_RESET_SUCCESS;
574}
575
576/**
577 * initio_init - set up an InitIO host adapter
578 * @host: InitIO host adapter
579 * @num_scbs: Number of SCBS
580 * @bios_addr: BIOS address
581 *
582 * Set up the host adapter and devices according to the configuration
583 * retrieved from the E2PROM.
584 *
585 * Locking: Calls E2PROM layer code which is not re-enterable so must
586 * run single threaded for now.
587 */
588
589static void initio_init(struct initio_host * host, u8 *bios_addr)
590{
591 int i;
592 u8 *flags;
593 u8 *heads;
594
595 /* Get E2Prom configuration */
596 initio_read_eeprom(host->addr);
597 if (i91unvramp->NVM_SCSIInfo[0].NVM_NumOfTarg == 8)
598 host->max_tar = 8;
599 else
600 host->max_tar = 16;
601
602 host->config = i91unvramp->NVM_SCSIInfo[0].NVM_ChConfig1;
603
604 host->scsi_id = i91unvramp->NVM_SCSIInfo[0].NVM_ChSCSIID;
605 host->idmask = ~(1 << host->scsi_id);
606
607#ifdef CHK_PARITY
608 /* Enable parity error response */
609 outb(inb(host->addr + TUL_PCMD) | 0x40, host->addr + TUL_PCMD);
610#endif
611
612 /* Mask all the interrupt */
613 outb(0x1F, host->addr + TUL_Mask);
614
615 initio_stop_bm(host);
616 /* --- Initialize the tulip --- */
617 outb(TSC_RST_CHIP, host->addr + TUL_SCtrl0);
618
619 /* program HBA's SCSI ID */
620 outb(host->scsi_id << 4, host->addr + TUL_SScsiId);
621
622 /* Enable Initiator Mode ,phase latch,alternate sync period mode,
623 disable SCSI reset */
624 if (host->config & HCC_EN_PAR)
625 host->sconf1 = (TSC_INITDEFAULT | TSC_EN_SCSI_PAR);
626 else
627 host->sconf1 = (TSC_INITDEFAULT);
628 outb(host->sconf1, host->addr + TUL_SConfig);
629
630 /* Enable HW reselect */
631 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
632
633 outb(0, host->addr + TUL_SPeriod);
634
635 /* selection time out = 250 ms */
636 outb(153, host->addr + TUL_STimeOut);
637
638 /* Enable SCSI terminator */
639 outb((host->config & (HCC_ACT_TERM1 | HCC_ACT_TERM2)),
640 host->addr + TUL_XCtrl);
641 outb(((host->config & HCC_AUTO_TERM) >> 4) |
642 (inb(host->addr + TUL_GCTRL1) & 0xFE),
643 host->addr + TUL_GCTRL1);
644
645 for (i = 0,
646 flags = & (i91unvramp->NVM_SCSIInfo[0].NVM_Targ0Config),
647 heads = bios_addr + 0x180;
648 i < host->max_tar;
649 i++, flags++) {
650 host->targets[i].flags = *flags & ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
651 if (host->targets[i].flags & TCF_EN_255)
652 host->targets[i].drv_flags = TCF_DRV_255_63;
653 else
654 host->targets[i].drv_flags = 0;
655 host->targets[i].js_period = 0;
656 host->targets[i].sconfig0 = host->sconf1;
657 host->targets[i].heads = *heads++;
658 if (host->targets[i].heads == 255)
659 host->targets[i].drv_flags = TCF_DRV_255_63;
660 else
661 host->targets[i].drv_flags = 0;
662 host->targets[i].sectors = *heads++;
663 host->targets[i].flags &= ~TCF_BUSY;
664 host->act_tags[i] = 0;
665 host->max_tags[i] = 0xFF;
666 } /* for */
667 printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n",
668 host->addr, host->pci_dev->irq,
669 host->bios_addr, host->scsi_id);
670 /* Reset SCSI Bus */
671 if (host->config & HCC_SCSI_RESET) {
672 printk(KERN_INFO "i91u: Reset SCSI Bus ... \n");
673 initio_reset_scsi(host, 10);
674 }
675 outb(0x17, host->addr + TUL_SCFG1);
676 outb(0xE9, host->addr + TUL_SIntEnable);
677}
678
679/**
680 * initio_alloc_scb - Allocate an SCB
681 * @host: InitIO host we are allocating for
682 *
683 * Walk the SCB list for the controller and allocate a free SCB if
684 * one exists.
685 */
686static struct scsi_ctrl_blk *initio_alloc_scb(struct initio_host *host)
687{
688 struct scsi_ctrl_blk *scb;
689 unsigned long flags;
690
691 spin_lock_irqsave(&host->avail_lock, flags);
692 if ((scb = host->first_avail) != NULL) {
693#if DEBUG_QUEUE
694 printk("find scb at %p\n", scb);
695#endif
696 if ((host->first_avail = scb->next) == NULL)
697 host->last_avail = NULL;
698 scb->next = NULL;
699 scb->status = SCB_RENT;
700 }
701 spin_unlock_irqrestore(&host->avail_lock, flags);
702 return scb;
703}
704
705/**
706 * initio_release_scb - Release an SCB
707 * @host: InitIO host that owns the SCB
708 * @cmnd: SCB command block being returned
709 *
710 * Return an allocated SCB to the host free list
711 */
712
713static void initio_release_scb(struct initio_host * host, struct scsi_ctrl_blk * cmnd)
714{
715 unsigned long flags;
716
717#if DEBUG_QUEUE
718 printk("Release SCB %p; ", cmnd);
719#endif
720 spin_lock_irqsave(&(host->avail_lock), flags);
721 cmnd->srb = NULL;
722 cmnd->status = 0;
723 cmnd->next = NULL;
724 if (host->last_avail != NULL) {
725 host->last_avail->next = cmnd;
726 host->last_avail = cmnd;
727 } else {
728 host->first_avail = cmnd;
729 host->last_avail = cmnd;
730 }
731 spin_unlock_irqrestore(&(host->avail_lock), flags);
732}
733
734/***************************************************************************/
735static void initio_append_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
736{
737
738#if DEBUG_QUEUE
739 printk("Append pend SCB %p; ", scbp);
740#endif
741 scbp->status = SCB_PEND;
742 scbp->next = NULL;
743 if (host->last_pending != NULL) {
744 host->last_pending->next = scbp;
745 host->last_pending = scbp;
746 } else {
747 host->first_pending = scbp;
748 host->last_pending = scbp;
749 }
750}
751
752/***************************************************************************/
753static void initio_push_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
754{
755
756#if DEBUG_QUEUE
757 printk("Push pend SCB %p; ", scbp);
758#endif
759 scbp->status = SCB_PEND;
760 if ((scbp->next = host->first_pending) != NULL) {
761 host->first_pending = scbp;
762 } else {
763 host->first_pending = scbp;
764 host->last_pending = scbp;
765 }
766}
767
768static struct scsi_ctrl_blk *initio_find_first_pend_scb(struct initio_host * host)
769{
770 struct scsi_ctrl_blk *first;
771
772
773 first = host->first_pending;
774 while (first != NULL) {
775 if (first->opcode != ExecSCSI)
776 return first;
777 if (first->tagmsg == 0) {
778 if ((host->act_tags[first->target] == 0) &&
779 !(host->targets[first->target].flags & TCF_BUSY))
780 return first;
781 } else {
782 if ((host->act_tags[first->target] >=
783 host->max_tags[first->target]) |
784 (host->targets[first->target].flags & TCF_BUSY)) {
785 first = first->next;
786 continue;
787 }
788 return first;
789 }
790 first = first->next;
791 }
792 return first;
793}
794
795static void initio_unlink_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
796{
797 struct scsi_ctrl_blk *tmp, *prev;
798
799#if DEBUG_QUEUE
800 printk("unlink pend SCB %p; ", scb);
801#endif
802
803 prev = tmp = host->first_pending;
804 while (tmp != NULL) {
805 if (scb == tmp) { /* Unlink this SCB */
806 if (tmp == host->first_pending) {
807 if ((host->first_pending = tmp->next) == NULL)
808 host->last_pending = NULL;
809 } else {
810 prev->next = tmp->next;
811 if (tmp == host->last_pending)
812 host->last_pending = prev;
813 }
814 tmp->next = NULL;
815 break;
816 }
817 prev = tmp;
818 tmp = tmp->next;
819 }
820}
821
822static void initio_append_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
823{
824
825#if DEBUG_QUEUE
826 printk("append busy SCB %p; ", scbp);
827#endif
828 if (scbp->tagmsg)
829 host->act_tags[scbp->target]++;
830 else
831 host->targets[scbp->target].flags |= TCF_BUSY;
832 scbp->status = SCB_BUSY;
833 scbp->next = NULL;
834 if (host->last_busy != NULL) {
835 host->last_busy->next = scbp;
836 host->last_busy = scbp;
837 } else {
838 host->first_busy = scbp;
839 host->last_busy = scbp;
840 }
841}
842
843/***************************************************************************/
844static struct scsi_ctrl_blk *initio_pop_busy_scb(struct initio_host * host)
845{
846 struct scsi_ctrl_blk *tmp;
847
848
849 if ((tmp = host->first_busy) != NULL) {
850 if ((host->first_busy = tmp->next) == NULL)
851 host->last_busy = NULL;
852 tmp->next = NULL;
853 if (tmp->tagmsg)
854 host->act_tags[tmp->target]--;
855 else
856 host->targets[tmp->target].flags &= ~TCF_BUSY;
857 }
858#if DEBUG_QUEUE
859 printk("Pop busy SCB %p; ", tmp);
860#endif
861 return tmp;
862}
863
864/***************************************************************************/
865static void initio_unlink_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
866{
867 struct scsi_ctrl_blk *tmp, *prev;
868
869#if DEBUG_QUEUE
870 printk("unlink busy SCB %p; ", scb);
871#endif
872
873 prev = tmp = host->first_busy;
874 while (tmp != NULL) {
875 if (scb == tmp) { /* Unlink this SCB */
876 if (tmp == host->first_busy) {
877 if ((host->first_busy = tmp->next) == NULL)
878 host->last_busy = NULL;
879 } else {
880 prev->next = tmp->next;
881 if (tmp == host->last_busy)
882 host->last_busy = prev;
883 }
884 tmp->next = NULL;
885 if (tmp->tagmsg)
886 host->act_tags[tmp->target]--;
887 else
888 host->targets[tmp->target].flags &= ~TCF_BUSY;
889 break;
890 }
891 prev = tmp;
892 tmp = tmp->next;
893 }
894 return;
895}
896
897struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun)
898{
899 struct scsi_ctrl_blk *tmp, *prev;
900 u16 scbp_tarlun;
901
902
903 prev = tmp = host->first_busy;
904 while (tmp != NULL) {
905 scbp_tarlun = (tmp->lun << 8) | (tmp->target);
906 if (scbp_tarlun == tarlun) { /* Unlink this SCB */
907 break;
908 }
909 prev = tmp;
910 tmp = tmp->next;
911 }
912#if DEBUG_QUEUE
913 printk("find busy SCB %p; ", tmp);
914#endif
915 return tmp;
916}
917
918static void initio_append_done_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
919{
920#if DEBUG_QUEUE
921 printk("append done SCB %p; ", scbp);
922#endif
923
924 scbp->status = SCB_DONE;
925 scbp->next = NULL;
926 if (host->last_done != NULL) {
927 host->last_done->next = scbp;
928 host->last_done = scbp;
929 } else {
930 host->first_done = scbp;
931 host->last_done = scbp;
932 }
933}
934
935struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host)
936{
937 struct scsi_ctrl_blk *tmp;
938
939 if ((tmp = host->first_done) != NULL) {
940 if ((host->first_done = tmp->next) == NULL)
941 host->last_done = NULL;
942 tmp->next = NULL;
943 }
944#if DEBUG_QUEUE
945 printk("find done SCB %p; ",tmp);
946#endif
947 return tmp;
948}
949
950static int initio_abort_srb(struct initio_host * host, struct scsi_cmnd *srbp)
951{
952 unsigned long flags;
953 struct scsi_ctrl_blk *tmp, *prev;
954
955 spin_lock_irqsave(&host->semaph_lock, flags);
956
957 if ((host->semaph == 0) && (host->active == NULL)) {
958 /* disable Jasmin SCSI Int */
959 outb(0x1F, host->addr + TUL_Mask);
960 spin_unlock_irqrestore(&host->semaph_lock, flags);
961 /* FIXME: synchronize_irq needed ? */
962 tulip_main(host);
963 spin_lock_irqsave(&host->semaph_lock, flags);
964 host->semaph = 1;
965 outb(0x0F, host->addr + TUL_Mask);
966 spin_unlock_irqrestore(&host->semaph_lock, flags);
967 return SCSI_ABORT_SNOOZE;
968 }
969 prev = tmp = host->first_pending; /* Check Pend queue */
970 while (tmp != NULL) {
971 /* 07/27/98 */
972 if (tmp->srb == srbp) {
973 if (tmp == host->active) {
974 spin_unlock_irqrestore(&host->semaph_lock, flags);
975 return SCSI_ABORT_BUSY;
976 } else if (tmp == host->first_pending) {
977 if ((host->first_pending = tmp->next) == NULL)
978 host->last_pending = NULL;
979 } else {
980 prev->next = tmp->next;
981 if (tmp == host->last_pending)
982 host->last_pending = prev;
983 }
984 tmp->hastat = HOST_ABORTED;
985 tmp->flags |= SCF_DONE;
986 if (tmp->flags & SCF_POST)
987 (*tmp->post) ((u8 *) host, (u8 *) tmp);
988 spin_unlock_irqrestore(&host->semaph_lock, flags);
989 return SCSI_ABORT_SUCCESS;
990 }
991 prev = tmp;
992 tmp = tmp->next;
993 }
994
995 prev = tmp = host->first_busy; /* Check Busy queue */
996 while (tmp != NULL) {
997 if (tmp->srb == srbp) {
998 if (tmp == host->active) {
999 spin_unlock_irqrestore(&host->semaph_lock, flags);
1000 return SCSI_ABORT_BUSY;
1001 } else if (tmp->tagmsg == 0) {
1002 spin_unlock_irqrestore(&host->semaph_lock, flags);
1003 return SCSI_ABORT_BUSY;
1004 } else {
1005 host->act_tags[tmp->target]--;
1006 if (tmp == host->first_busy) {
1007 if ((host->first_busy = tmp->next) == NULL)
1008 host->last_busy = NULL;
1009 } else {
1010 prev->next = tmp->next;
1011 if (tmp == host->last_busy)
1012 host->last_busy = prev;
1013 }
1014 tmp->next = NULL;
1015
1016
1017 tmp->hastat = HOST_ABORTED;
1018 tmp->flags |= SCF_DONE;
1019 if (tmp->flags & SCF_POST)
1020 (*tmp->post) ((u8 *) host, (u8 *) tmp);
1021 spin_unlock_irqrestore(&host->semaph_lock, flags);
1022 return SCSI_ABORT_SUCCESS;
1023 }
1024 }
1025 prev = tmp;
1026 tmp = tmp->next;
1027 }
1028 spin_unlock_irqrestore(&host->semaph_lock, flags);
1029 return SCSI_ABORT_NOT_RUNNING;
1030}
1031
1032/***************************************************************************/
1033static int initio_bad_seq(struct initio_host * host)
1034{
1035 struct scsi_ctrl_blk *scb;
1036
1037 printk("initio_bad_seg c=%d\n", host->index);
1038
1039 if ((scb = host->active) != NULL) {
1040 initio_unlink_busy_scb(host, scb);
1041 scb->hastat = HOST_BAD_PHAS;
1042 scb->tastat = 0;
1043 initio_append_done_scb(host, scb);
1044 }
1045 initio_stop_bm(host);
1046 initio_reset_scsi(host, 8); /* 7/29/98 */
1047 return initio_post_scsi_rst(host);
1048}
1049
1050
1051/************************************************************************/
1052static void initio_exec_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
1053{
1054 unsigned long flags;
1055
1056 scb->mode = 0;
1057
1058 scb->sgidx = 0;
1059 scb->sgmax = scb->sglen;
1060
1061 spin_lock_irqsave(&host->semaph_lock, flags);
1062
1063 initio_append_pend_scb(host, scb); /* Append this SCB to Pending queue */
1064
1065/* VVVVV 07/21/98 */
1066 if (host->semaph == 1) {
1067 /* Disable Jasmin SCSI Int */
1068 outb(0x1F, host->addr + TUL_Mask);
1069 host->semaph = 0;
1070 spin_unlock_irqrestore(&host->semaph_lock, flags);
1071
1072 tulip_main(host);
1073
1074 spin_lock_irqsave(&host->semaph_lock, flags);
1075 host->semaph = 1;
1076 outb(0x0F, host->addr + TUL_Mask);
1077 }
1078 spin_unlock_irqrestore(&host->semaph_lock, flags);
1079 return;
1080}
1081
1082/***************************************************************************/
1083static int initio_isr(struct initio_host * host)
1084{
1085 if (inb(host->addr + TUL_Int) & TSS_INT_PENDING) {
1086 if (host->semaph == 1) {
1087 outb(0x1F, host->addr + TUL_Mask);
1088 /* Disable Tulip SCSI Int */
1089 host->semaph = 0;
1090
1091 tulip_main(host);
1092
1093 host->semaph = 1;
1094 outb(0x0F, host->addr + TUL_Mask);
1095 return 1;
1096 }
1097 }
1098 return 0;
1099}
1100
1101static int tulip_main(struct initio_host * host)
1102{
1103 struct scsi_ctrl_blk *scb;
1104
1105 for (;;) {
1106 tulip_scsi(host); /* Call tulip_scsi */
1107
1108 /* Walk the list of completed SCBs */
1109 while ((scb = initio_find_done_scb(host)) != NULL) { /* find done entry */
1110 if (scb->tastat == INI_QUEUE_FULL) {
1111 host->max_tags[scb->target] =
1112 host->act_tags[scb->target] - 1;
1113 scb->tastat = 0;
1114 initio_append_pend_scb(host, scb);
1115 continue;
1116 }
1117 if (!(scb->mode & SCM_RSENS)) { /* not in auto req. sense mode */
1118 if (scb->tastat == 2) {
1119
1120 /* clr sync. nego flag */
1121
1122 if (scb->flags & SCF_SENSE) {
1123 u8 len;
1124 len = scb->senselen;
1125 if (len == 0)
1126 len = 1;
1127 scb->buflen = scb->senselen;
1128 scb->bufptr = scb->senseptr;
1129 scb->flags &= ~(SCF_SG | SCF_DIR); /* for xfer_data_in */
1130 /* so, we won't report wrong direction in xfer_data_in,
1131 and won't report HOST_DO_DU in state_6 */
1132 scb->mode = SCM_RSENS;
1133 scb->ident &= 0xBF; /* Disable Disconnect */
1134 scb->tagmsg = 0;
1135 scb->tastat = 0;
1136 scb->cdblen = 6;
1137 scb->cdb[0] = SCSICMD_RequestSense;
1138 scb->cdb[1] = 0;
1139 scb->cdb[2] = 0;
1140 scb->cdb[3] = 0;
1141 scb->cdb[4] = len;
1142 scb->cdb[5] = 0;
1143 initio_push_pend_scb(host, scb);
1144 break;
1145 }
1146 }
1147 } else { /* in request sense mode */
1148
1149 if (scb->tastat == 2) { /* check contition status again after sending
1150 requset sense cmd 0x3 */
1151 scb->hastat = HOST_BAD_PHAS;
1152 }
1153 scb->tastat = 2;
1154 }
1155 scb->flags |= SCF_DONE;
1156 if (scb->flags & SCF_POST) {
1157 /* FIXME: only one post method and lose casts */
1158 (*scb->post) ((u8 *) host, (u8 *) scb);
1159 }
1160 } /* while */
1161 /* find_active: */
1162 if (inb(host->addr + TUL_SStatus0) & TSS_INT_PENDING)
1163 continue;
1164 if (host->active) /* return to OS and wait for xfer_done_ISR/Selected_ISR */
1165 return 1; /* return to OS, enable interrupt */
1166 /* Check pending SCB */
1167 if (initio_find_first_pend_scb(host) == NULL)
1168 return 1; /* return to OS, enable interrupt */
1169 } /* End of for loop */
1170 /* statement won't reach here */
1171}
1172
1173static void tulip_scsi(struct initio_host * host)
1174{
1175 struct scsi_ctrl_blk *scb;
1176 struct target_control *active_tc;
1177
1178 /* make sure to service interrupt asap */
1179 if ((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING) {
1180 host->phase = host->jsstatus0 & TSS_PH_MASK;
1181 host->jsstatus1 = inb(host->addr + TUL_SStatus1);
1182 host->jsint = inb(host->addr + TUL_SInt);
1183 if (host->jsint & TSS_SCSIRST_INT) { /* SCSI bus reset detected */
1184 int_initio_scsi_rst(host);
1185 return;
1186 }
1187 if (host->jsint & TSS_RESEL_INT) { /* if selected/reselected interrupt */
1188 if (int_initio_resel(host) == 0)
1189 initio_next_state(host);
1190 return;
1191 }
1192 if (host->jsint & TSS_SEL_TIMEOUT) {
1193 int_initio_busfree(host);
1194 return;
1195 }
1196 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
1197 int_initio_busfree(host); /* unexpected bus free or sel timeout */
1198 return;
1199 }
1200 if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) { /* func complete or Bus service */
1201 if ((scb = host->active) != NULL)
1202 initio_next_state(host);
1203 return;
1204 }
1205 }
1206 if (host->active != NULL)
1207 return;
1208
1209 if ((scb = initio_find_first_pend_scb(host)) == NULL)
1210 return;
1211
1212 /* program HBA's SCSI ID & target SCSI ID */
1213 outb((host->scsi_id << 4) | (scb->target & 0x0F),
1214 host->addr + TUL_SScsiId);
1215 if (scb->opcode == ExecSCSI) {
1216 active_tc = &host->targets[scb->target];
1217
1218 if (scb->tagmsg)
1219 active_tc->drv_flags |= TCF_DRV_EN_TAG;
1220 else
1221 active_tc->drv_flags &= ~TCF_DRV_EN_TAG;
1222
1223 outb(active_tc->js_period, host->addr + TUL_SPeriod);
1224 if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) { /* do wdtr negotiation */
1225 initio_select_atn_stop(host, scb);
1226 } else {
1227 if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) { /* do sync negotiation */
1228 initio_select_atn_stop(host, scb);
1229 } else {
1230 if (scb->tagmsg)
1231 initio_select_atn3(host, scb);
1232 else
1233 initio_select_atn(host, scb);
1234 }
1235 }
1236 if (scb->flags & SCF_POLL) {
1237 while (wait_tulip(host) != -1) {
1238 if (initio_next_state(host) == -1)
1239 break;
1240 }
1241 }
1242 } else if (scb->opcode == BusDevRst) {
1243 initio_select_atn_stop(host, scb);
1244 scb->next_state = 8;
1245 if (scb->flags & SCF_POLL) {
1246 while (wait_tulip(host) != -1) {
1247 if (initio_next_state(host) == -1)
1248 break;
1249 }
1250 }
1251 } else if (scb->opcode == AbortCmd) {
1252 if (initio_abort_srb(host, scb->srb) != 0) {
1253 initio_unlink_pend_scb(host, scb);
1254 initio_release_scb(host, scb);
1255 } else {
1256 scb->opcode = BusDevRst;
1257 initio_select_atn_stop(host, scb);
1258 scb->next_state = 8;
1259 }
1260 } else {
1261 initio_unlink_pend_scb(host, scb);
1262 scb->hastat = 0x16; /* bad command */
1263 initio_append_done_scb(host, scb);
1264 }
1265 return;
1266}
1267
1268/**
1269 * initio_next_state - Next SCSI state
1270 * @host: InitIO host we are processing
1271 *
1272 * Progress the active command block along the state machine
1273 * until we hit a state which we must wait for activity to occur.
1274 *
1275 * Returns zero or a negative code.
1276 */
1277
1278static int initio_next_state(struct initio_host * host)
1279{
1280 int next;
1281
1282 next = host->active->next_state;
1283 for (;;) {
1284 switch (next) {
1285 case 1:
1286 next = initio_state_1(host);
1287 break;
1288 case 2:
1289 next = initio_state_2(host);
1290 break;
1291 case 3:
1292 next = initio_state_3(host);
1293 break;
1294 case 4:
1295 next = initio_state_4(host);
1296 break;
1297 case 5:
1298 next = initio_state_5(host);
1299 break;
1300 case 6:
1301 next = initio_state_6(host);
1302 break;
1303 case 7:
1304 next = initio_state_7(host);
1305 break;
1306 case 8:
1307 return initio_bus_device_reset(host);
1308 default:
1309 return initio_bad_seq(host);
1310 }
1311 if (next <= 0)
1312 return next;
1313 }
1314}
1315
1316
1317/**
1318 * initio_state_1 - SCSI state machine
1319 * @host: InitIO host we are controlling
1320 *
1321 * Perform SCSI state processing for Select/Attention/Stop
1322 */
1323
1324static int initio_state_1(struct initio_host * host)
1325{
1326 struct scsi_ctrl_blk *scb = host->active;
1327 struct target_control *active_tc = host->active_tc;
1328#if DEBUG_STATE
1329 printk("-s1-");
1330#endif
1331
1332 /* Move the SCB from pending to busy */
1333 initio_unlink_pend_scb(host, scb);
1334 initio_append_busy_scb(host, scb);
1335
1336 outb(active_tc->sconfig0, host->addr + TUL_SConfig );
1337 /* ATN on */
1338 if (host->phase == MSG_OUT) {
1339 outb(TSC_EN_BUS_IN | TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
1340 outb(scb->ident, host->addr + TUL_SFifo);
1341
1342 if (scb->tagmsg) {
1343 outb(scb->tagmsg, host->addr + TUL_SFifo);
1344 outb(scb->tagid, host->addr + TUL_SFifo);
1345 }
1346 if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) {
1347 active_tc->flags |= TCF_WDTR_DONE;
1348 outb(MSG_EXTEND, host->addr + TUL_SFifo);
1349 outb(2, host->addr + TUL_SFifo); /* Extended msg length */
1350 outb(3, host->addr + TUL_SFifo); /* Sync request */
1351 outb(1, host->addr + TUL_SFifo); /* Start from 16 bits */
1352 } else if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) {
1353 active_tc->flags |= TCF_SYNC_DONE;
1354 outb(MSG_EXTEND, host->addr + TUL_SFifo);
1355 outb(3, host->addr + TUL_SFifo); /* extended msg length */
1356 outb(1, host->addr + TUL_SFifo); /* sync request */
1357 outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo);
1358 outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */
1359 }
1360 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1361 if (wait_tulip(host) == -1)
1362 return -1;
1363 }
1364 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1365 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal);
1366 /* Into before CDB xfer */
1367 return 3;
1368}
1369
1370
1371/**
1372 * initio_state_2 - SCSI state machine
1373 * @host: InitIO host we are controlling
1374 *
1375 * state after selection with attention
1376 * state after selection with attention3
1377 */
1378
1379static int initio_state_2(struct initio_host * host)
1380{
1381 struct scsi_ctrl_blk *scb = host->active;
1382 struct target_control *active_tc = host->active_tc;
1383#if DEBUG_STATE
1384 printk("-s2-");
1385#endif
1386
1387 initio_unlink_pend_scb(host, scb);
1388 initio_append_busy_scb(host, scb);
1389
1390 outb(active_tc->sconfig0, host->addr + TUL_SConfig);
1391
1392 if (host->jsstatus1 & TSS_CMD_PH_CMP)
1393 return 4;
1394
1395 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1396 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal);
1397 /* Into before CDB xfer */
1398 return 3;
1399}
1400
1401/**
1402 * initio_state_3 - SCSI state machine
1403 * @host: InitIO host we are controlling
1404 *
1405 * state before CDB xfer is done
1406 */
1407
1408static int initio_state_3(struct initio_host * host)
1409{
1410 struct scsi_ctrl_blk *scb = host->active;
1411 struct target_control *active_tc = host->active_tc;
1412 int i;
1413
1414#if DEBUG_STATE
1415 printk("-s3-");
1416#endif
1417 for (;;) {
1418 switch (host->phase) {
1419 case CMD_OUT: /* Command out phase */
1420 for (i = 0; i < (int) scb->cdblen; i++)
1421 outb(scb->cdb[i], host->addr + TUL_SFifo);
1422 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1423 if (wait_tulip(host) == -1)
1424 return -1;
1425 if (host->phase == CMD_OUT)
1426 return initio_bad_seq(host);
1427 return 4;
1428
1429 case MSG_IN: /* Message in phase */
1430 scb->next_state = 3;
1431 if (initio_msgin(host) == -1)
1432 return -1;
1433 break;
1434
1435 case STATUS_IN: /* Status phase */
1436 if (initio_status_msg(host) == -1)
1437 return -1;
1438 break;
1439
1440 case MSG_OUT: /* Message out phase */
1441 if (active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) {
1442 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */
1443 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1444 if (wait_tulip(host) == -1)
1445 return -1;
1446 } else {
1447 active_tc->flags |= TCF_SYNC_DONE;
1448
1449 outb(MSG_EXTEND, host->addr + TUL_SFifo);
1450 outb(3, host->addr + TUL_SFifo); /* ext. msg len */
1451 outb(1, host->addr + TUL_SFifo); /* sync request */
1452 outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo);
1453 outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */
1454 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1455 if (wait_tulip(host) == -1)
1456 return -1;
1457 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1458 outb(inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7), host->addr + TUL_SSignal);
1459
1460 }
1461 break;
1462 default:
1463 return initio_bad_seq(host);
1464 }
1465 }
1466}
1467
1468/**
1469 * initio_state_4 - SCSI state machine
1470 * @host: InitIO host we are controlling
1471 *
1472 * SCSI state machine. State 4
1473 */
1474
1475static int initio_state_4(struct initio_host * host)
1476{
1477 struct scsi_ctrl_blk *scb = host->active;
1478
1479#if DEBUG_STATE
1480 printk("-s4-");
1481#endif
1482 if ((scb->flags & SCF_DIR) == SCF_NO_XF) {
1483 return 6; /* Go to state 6 (After data) */
1484 }
1485 for (;;) {
1486 if (scb->buflen == 0)
1487 return 6;
1488
1489 switch (host->phase) {
1490
1491 case STATUS_IN: /* Status phase */
1492 if ((scb->flags & SCF_DIR) != 0) /* if direction bit set then report data underrun */
1493 scb->hastat = HOST_DO_DU;
1494 if ((initio_status_msg(host)) == -1)
1495 return -1;
1496 break;
1497
1498 case MSG_IN: /* Message in phase */
1499 scb->next_state = 0x4;
1500 if (initio_msgin(host) == -1)
1501 return -1;
1502 break;
1503
1504 case MSG_OUT: /* Message out phase */
1505 if (host->jsstatus0 & TSS_PAR_ERROR) {
1506 scb->buflen = 0;
1507 scb->hastat = HOST_DO_DU;
1508 if (initio_msgout_ide(host) == -1)
1509 return -1;
1510 return 6;
1511 } else {
1512 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */
1513 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1514 if (wait_tulip(host) == -1)
1515 return -1;
1516 }
1517 break;
1518
1519 case DATA_IN: /* Data in phase */
1520 return initio_xfer_data_in(host);
1521
1522 case DATA_OUT: /* Data out phase */
1523 return initio_xfer_data_out(host);
1524
1525 default:
1526 return initio_bad_seq(host);
1527 }
1528 }
1529}
1530
1531
1532/**
1533 * initio_state_5 - SCSI state machine
1534 * @host: InitIO host we are controlling
1535 *
1536 * State after dma xfer done or phase change before xfer done
1537 */
1538
1539static int initio_state_5(struct initio_host * host)
1540{
1541 struct scsi_ctrl_blk *scb = host->active;
1542 long cnt, xcnt; /* cannot use unsigned !! code: if (xcnt < 0) */
1543
1544#if DEBUG_STATE
1545 printk("-s5-");
1546#endif
1547 /*------ get remaining count -------*/
1548 cnt = inl(host->addr + TUL_SCnt0) & 0x0FFFFFF;
1549
1550 if (inb(host->addr + TUL_XCmd) & 0x20) {
1551 /* ----------------------- DATA_IN ----------------------------- */
1552 /* check scsi parity error */
1553 if (host->jsstatus0 & TSS_PAR_ERROR)
1554 scb->hastat = HOST_DO_DU;
1555 if (inb(host->addr + TUL_XStatus) & XPEND) { /* DMA xfer pending, Send STOP */
1556 /* tell Hardware scsi xfer has been terminated */
1557 outb(inb(host->addr + TUL_XCtrl) | 0x80, host->addr + TUL_XCtrl);
1558 /* wait until DMA xfer not pending */
1559 while (inb(host->addr + TUL_XStatus) & XPEND)
1560 cpu_relax();
1561 }
1562 } else {
1563 /*-------- DATA OUT -----------*/
1564 if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) {
1565 if (host->active_tc->js_period & TSC_WIDE_SCSI)
1566 cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F) << 1;
1567 else
1568 cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F);
1569 }
1570 if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */
1571 outb(TAX_X_ABT, host->addr + TUL_XCmd);
1572 /* wait Abort DMA xfer done */
1573 while ((inb(host->addr + TUL_Int) & XABT) == 0)
1574 cpu_relax();
1575 }
1576 if ((cnt == 1) && (host->phase == DATA_OUT)) {
1577 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1578 if (wait_tulip(host) == -1)
1579 return -1;
1580 cnt = 0;
1581 } else {
1582 if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0)
1583 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1584 }
1585 }
1586 if (cnt == 0) {
1587 scb->buflen = 0;
1588 return 6; /* After Data */
1589 }
1590 /* Update active data pointer */
1591 xcnt = (long) scb->buflen - cnt; /* xcnt== bytes already xferred */
1592 scb->buflen = (u32) cnt; /* cnt == bytes left to be xferred */
1593 if (scb->flags & SCF_SG) {
1594 struct sg_entry *sgp;
1595 unsigned long i;
1596
1597 sgp = &scb->sglist[scb->sgidx];
1598 for (i = scb->sgidx; i < scb->sgmax; sgp++, i++) {
1599 xcnt -= (long) sgp->len;
1600 if (xcnt < 0) { /* this sgp xfer half done */
1601 xcnt += (long) sgp->len; /* xcnt == bytes xferred in this sgp */
1602 sgp->data += (u32) xcnt; /* new ptr to be xfer */
1603 sgp->len -= (u32) xcnt; /* new len to be xfer */
1604 scb->bufptr += ((u32) (i - scb->sgidx) << 3);
1605 /* new SG table ptr */
1606 scb->sglen = (u8) (scb->sgmax - i);
1607 /* new SG table len */
1608 scb->sgidx = (u16) i;
1609 /* for next disc and come in this loop */
1610 return 4; /* Go to state 4 */
1611 }
1612 /* else (xcnt >= 0 , i.e. this sgp already xferred */
1613 } /* for */
1614 return 6; /* Go to state 6 */
1615 } else {
1616 scb->bufptr += (u32) xcnt;
1617 }
1618 return 4; /* Go to state 4 */
1619}
1620
1621/**
1622 * initio_state_6 - SCSI state machine
1623 * @host: InitIO host we are controlling
1624 *
1625 * State after Data phase
1626 */
1627
1628static int initio_state_6(struct initio_host * host)
1629{
1630 struct scsi_ctrl_blk *scb = host->active;
1631
1632#if DEBUG_STATE
1633 printk("-s6-");
1634#endif
1635 for (;;) {
1636 switch (host->phase) {
1637 case STATUS_IN: /* Status phase */
1638 if ((initio_status_msg(host)) == -1)
1639 return -1;
1640 break;
1641
1642 case MSG_IN: /* Message in phase */
1643 scb->next_state = 6;
1644 if ((initio_msgin(host)) == -1)
1645 return -1;
1646 break;
1647
1648 case MSG_OUT: /* Message out phase */
1649 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */
1650 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1651 if (wait_tulip(host) == -1)
1652 return -1;
1653 break;
1654
1655 case DATA_IN: /* Data in phase */
1656 return initio_xpad_in(host);
1657
1658 case DATA_OUT: /* Data out phase */
1659 return initio_xpad_out(host);
1660
1661 default:
1662 return initio_bad_seq(host);
1663 }
1664 }
1665}
1666
1667/**
1668 * initio_state_7 - SCSI state machine
1669 * @host: InitIO host we are controlling
1670 *
1671 */
1672
1673int initio_state_7(struct initio_host * host)
1674{
1675 int cnt, i;
1676
1677#if DEBUG_STATE
1678 printk("-s7-");
1679#endif
1680 /* flush SCSI FIFO */
1681 cnt = inb(host->addr + TUL_SFifoCnt) & 0x1F;
1682 if (cnt) {
1683 for (i = 0; i < cnt; i++)
1684 inb(host->addr + TUL_SFifo);
1685 }
1686 switch (host->phase) {
1687 case DATA_IN: /* Data in phase */
1688 case DATA_OUT: /* Data out phase */
1689 return initio_bad_seq(host);
1690 default:
1691 return 6; /* Go to state 6 */
1692 }
1693}
1694
1695/**
1696 * initio_xfer_data_in - Commence data input
1697 * @host: InitIO host in use
1698 *
1699 * Commence a block of data transfer. The transfer itself will
1700 * be managed by the controller and we will get a completion (or
1701 * failure) interrupt.
1702 */
1703static int initio_xfer_data_in(struct initio_host * host)
1704{
1705 struct scsi_ctrl_blk *scb = host->active;
1706
1707 if ((scb->flags & SCF_DIR) == SCF_DOUT)
1708 return 6; /* wrong direction */
1709
1710 outl(scb->buflen, host->addr + TUL_SCnt0);
1711 outb(TSC_XF_DMA_IN, host->addr + TUL_SCmd); /* 7/25/95 */
1712
1713 if (scb->flags & SCF_SG) { /* S/G xfer */
1714 outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH);
1715 outl(scb->bufptr, host->addr + TUL_XAddH);
1716 outb(TAX_SG_IN, host->addr + TUL_XCmd);
1717 } else {
1718 outl(scb->buflen, host->addr + TUL_XCntH);
1719 outl(scb->bufptr, host->addr + TUL_XAddH);
1720 outb(TAX_X_IN, host->addr + TUL_XCmd);
1721 }
1722 scb->next_state = 0x5;
1723 return 0; /* return to OS, wait xfer done , let jas_isr come in */
1724}
1725
1726/**
1727 * initio_xfer_data_out - Commence data output
1728 * @host: InitIO host in use
1729 *
1730 * Commence a block of data transfer. The transfer itself will
1731 * be managed by the controller and we will get a completion (or
1732 * failure) interrupt.
1733 */
1734
1735static int initio_xfer_data_out(struct initio_host * host)
1736{
1737 struct scsi_ctrl_blk *scb = host->active;
1738
1739 if ((scb->flags & SCF_DIR) == SCF_DIN)
1740 return 6; /* wrong direction */
1741
1742 outl(scb->buflen, host->addr + TUL_SCnt0);
1743 outb(TSC_XF_DMA_OUT, host->addr + TUL_SCmd);
1744
1745 if (scb->flags & SCF_SG) { /* S/G xfer */
1746 outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH);
1747 outl(scb->bufptr, host->addr + TUL_XAddH);
1748 outb(TAX_SG_OUT, host->addr + TUL_XCmd);
1749 } else {
1750 outl(scb->buflen, host->addr + TUL_XCntH);
1751 outl(scb->bufptr, host->addr + TUL_XAddH);
1752 outb(TAX_X_OUT, host->addr + TUL_XCmd);
1753 }
1754
1755 scb->next_state = 0x5;
1756 return 0; /* return to OS, wait xfer done , let jas_isr come in */
1757}
1758
1759int initio_xpad_in(struct initio_host * host)
1760{
1761 struct scsi_ctrl_blk *scb = host->active;
1762 struct target_control *active_tc = host->active_tc;
1763
1764 if ((scb->flags & SCF_DIR) != SCF_NO_DCHK)
1765 scb->hastat = HOST_DO_DU; /* over run */
1766 for (;;) {
1767 if (active_tc->js_period & TSC_WIDE_SCSI)
1768 outl(2, host->addr + TUL_SCnt0);
1769 else
1770 outl(1, host->addr + TUL_SCnt0);
1771
1772 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1773 if (wait_tulip(host) == -1)
1774 return -1;
1775 if (host->phase != DATA_IN) {
1776 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1777 return 6;
1778 }
1779 inb(host->addr + TUL_SFifo);
1780 }
1781}
1782
1783int initio_xpad_out(struct initio_host * host)
1784{
1785 struct scsi_ctrl_blk *scb = host->active;
1786 struct target_control *active_tc = host->active_tc;
1787
1788 if ((scb->flags & SCF_DIR) != SCF_NO_DCHK)
1789 scb->hastat = HOST_DO_DU; /* over run */
1790 for (;;) {
1791 if (active_tc->js_period & TSC_WIDE_SCSI)
1792 outl(2, host->addr + TUL_SCnt0);
1793 else
1794 outl(1, host->addr + TUL_SCnt0);
1795
1796 outb(0, host->addr + TUL_SFifo);
1797 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1798 if ((wait_tulip(host)) == -1)
1799 return -1;
1800 if (host->phase != DATA_OUT) { /* Disable wide CPU to allow read 16 bits */
1801 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
1802 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1803 return 6;
1804 }
1805 }
1806}
1807
1808int initio_status_msg(struct initio_host * host)
1809{ /* status & MSG_IN */
1810 struct scsi_ctrl_blk *scb = host->active;
1811 u8 msg;
1812
1813 outb(TSC_CMD_COMP, host->addr + TUL_SCmd);
1814 if (wait_tulip(host) == -1)
1815 return -1;
1816
1817 /* get status */
1818 scb->tastat = inb(host->addr + TUL_SFifo);
1819
1820 if (host->phase == MSG_OUT) {
1821 if (host->jsstatus0 & TSS_PAR_ERROR)
1822 outb(MSG_PARITY, host->addr + TUL_SFifo);
1823 else
1824 outb(MSG_NOP, host->addr + TUL_SFifo);
1825 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1826 return wait_tulip(host);
1827 }
1828 if (host->phase == MSG_IN) {
1829 msg = inb(host->addr + TUL_SFifo);
1830 if (host->jsstatus0 & TSS_PAR_ERROR) { /* Parity error */
1831 if ((initio_msgin_accept(host)) == -1)
1832 return -1;
1833 if (host->phase != MSG_OUT)
1834 return initio_bad_seq(host);
1835 outb(MSG_PARITY, host->addr + TUL_SFifo);
1836 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1837 return wait_tulip(host);
1838 }
1839 if (msg == 0) { /* Command complete */
1840
1841 if ((scb->tastat & 0x18) == 0x10) /* No link support */
1842 return initio_bad_seq(host);
1843 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1844 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
1845 return initio_wait_done_disc(host);
1846
1847 }
1848 if (msg == MSG_LINK_COMP || msg == MSG_LINK_FLAG) {
1849 if ((scb->tastat & 0x18) == 0x10)
1850 return initio_msgin_accept(host);
1851 }
1852 }
1853 return initio_bad_seq(host);
1854}
1855
1856
1857/* scsi bus free */
1858int int_initio_busfree(struct initio_host * host)
1859{
1860 struct scsi_ctrl_blk *scb = host->active;
1861
1862 if (scb != NULL) {
1863 if (scb->status & SCB_SELECT) { /* selection timeout */
1864 initio_unlink_pend_scb(host, scb);
1865 scb->hastat = HOST_SEL_TOUT;
1866 initio_append_done_scb(host, scb);
1867 } else { /* Unexpected bus free */
1868 initio_unlink_busy_scb(host, scb);
1869 scb->hastat = HOST_BUS_FREE;
1870 initio_append_done_scb(host, scb);
1871 }
1872 host->active = NULL;
1873 host->active_tc = NULL;
1874 }
1875 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
1876 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
1877 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
1878 return -1;
1879}
1880
1881
1882/**
1883 * int_initio_scsi_rst - SCSI reset occurred
1884 * @host: Host seeing the reset
1885 *
1886 * A SCSI bus reset has occurred. Clean up any pending transfer
1887 * the hardware is doing by DMA and then abort all active and
1888 * disconnected commands. The mid layer should sort the rest out
1889 * for us
1890 */
1891
1892static int int_initio_scsi_rst(struct initio_host * host)
1893{
1894 struct scsi_ctrl_blk *scb;
1895 int i;
1896
1897 /* if DMA xfer is pending, abort DMA xfer */
1898 if (inb(host->addr + TUL_XStatus) & 0x01) {
1899 outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd);
1900 /* wait Abort DMA xfer done */
1901 while ((inb(host->addr + TUL_Int) & 0x04) == 0)
1902 cpu_relax();
1903 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1904 }
1905 /* Abort all active & disconnected scb */
1906 while ((scb = initio_pop_busy_scb(host)) != NULL) {
1907 scb->hastat = HOST_BAD_PHAS;
1908 initio_append_done_scb(host, scb);
1909 }
1910 host->active = NULL;
1911 host->active_tc = NULL;
1912
1913 /* clr sync nego. done flag */
1914 for (i = 0; i < host->max_tar; i++)
1915 host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
1916 return -1;
1917}
1918
1919/**
1920 * int_initio_scsi_resel - Reselection occurred
1921 * @host: InitIO host adapter
1922 *
1923 * A SCSI reselection event has been signalled and the interrupt
1924 * is now being processed. Work out which command block needs attention
1925 * and continue processing that command.
1926 */
1927
1928int int_initio_resel(struct initio_host * host)
1929{
1930 struct scsi_ctrl_blk *scb;
1931 struct target_control *active_tc;
1932 u8 tag, msg = 0;
1933 u8 tar, lun;
1934
1935 if ((scb = host->active) != NULL) {
1936 /* FIXME: Why check and not just clear ? */
1937 if (scb->status & SCB_SELECT) /* if waiting for selection complete */
1938 scb->status &= ~SCB_SELECT;
1939 host->active = NULL;
1940 }
1941 /* --------- get target id---------------------- */
1942 tar = inb(host->addr + TUL_SBusId);
1943 /* ------ get LUN from Identify message----------- */
1944 lun = inb(host->addr + TUL_SIdent) & 0x0F;
1945 /* 07/22/98 from 0x1F -> 0x0F */
1946 active_tc = &host->targets[tar];
1947 host->active_tc = active_tc;
1948 outb(active_tc->sconfig0, host->addr + TUL_SConfig);
1949 outb(active_tc->js_period, host->addr + TUL_SPeriod);
1950
1951 /* ------------- tag queueing ? ------------------- */
1952 if (active_tc->drv_flags & TCF_DRV_EN_TAG) {
1953 if ((initio_msgin_accept(host)) == -1)
1954 return -1;
1955 if (host->phase != MSG_IN)
1956 goto no_tag;
1957 outl(1, host->addr + TUL_SCnt0);
1958 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1959 if (wait_tulip(host) == -1)
1960 return -1;
1961 msg = inb(host->addr + TUL_SFifo); /* Read Tag Message */
1962
1963 if (msg < MSG_STAG || msg > MSG_OTAG) /* Is simple Tag */
1964 goto no_tag;
1965
1966 if (initio_msgin_accept(host) == -1)
1967 return -1;
1968
1969 if (host->phase != MSG_IN)
1970 goto no_tag;
1971
1972 outl(1, host->addr + TUL_SCnt0);
1973 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1974 if (wait_tulip(host) == -1)
1975 return -1;
1976 tag = inb(host->addr + TUL_SFifo); /* Read Tag ID */
1977 scb = host->scb + tag;
1978 if (scb->target != tar || scb->lun != lun) {
1979 return initio_msgout_abort_tag(host);
1980 }
1981 if (scb->status != SCB_BUSY) { /* 03/24/95 */
1982 return initio_msgout_abort_tag(host);
1983 }
1984 host->active = scb;
1985 if ((initio_msgin_accept(host)) == -1)
1986 return -1;
1987 } else { /* No tag */
1988 no_tag:
1989 if ((scb = initio_find_busy_scb(host, tar | (lun << 8))) == NULL) {
1990 return initio_msgout_abort_targ(host);
1991 }
1992 host->active = scb;
1993 if (!(active_tc->drv_flags & TCF_DRV_EN_TAG)) {
1994 if ((initio_msgin_accept(host)) == -1)
1995 return -1;
1996 }
1997 }
1998 return 0;
1999}
2000
2001/**
2002 * int_initio_bad_seq - out of phase
2003 * @host: InitIO host flagging event
2004 *
2005 * We have ended up out of phase somehow. Reset the host controller
2006 * and throw all our toys out of the pram. Let the midlayer clean up
2007 */
2008
2009static int int_initio_bad_seq(struct initio_host * host)
2010{ /* target wrong phase */
2011 struct scsi_ctrl_blk *scb;
2012 int i;
2013
2014 initio_reset_scsi(host, 10);
2015
2016 while ((scb = initio_pop_busy_scb(host)) != NULL) {
2017 scb->hastat = HOST_BAD_PHAS;
2018 initio_append_done_scb(host, scb);
2019 }
2020 for (i = 0; i < host->max_tar; i++)
2021 host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
2022 return -1;
2023}
2024
2025
2026/**
2027 * initio_msgout_abort_targ - abort a tag
2028 * @host: InitIO host
2029 *
2030 * Abort when the target/lun does not match or when our SCB is not
2031 * busy. Used by untagged commands.
2032 */
2033
2034static int initio_msgout_abort_targ(struct initio_host * host)
2035{
2036
2037 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2038 if (initio_msgin_accept(host) == -1)
2039 return -1;
2040 if (host->phase != MSG_OUT)
2041 return initio_bad_seq(host);
2042
2043 outb(MSG_ABORT, host->addr + TUL_SFifo);
2044 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2045
2046 return initio_wait_disc(host);
2047}
2048
2049/**
2050 * initio_msgout_abort_tag - abort a tag
2051 * @host: InitIO host
2052 *
2053 * Abort when the target/lun does not match or when our SCB is not
2054 * busy. Used for tagged commands.
2055 */
2056
2057static int initio_msgout_abort_tag(struct initio_host * host)
2058{
2059
2060 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2061 if (initio_msgin_accept(host) == -1)
2062 return -1;
2063 if (host->phase != MSG_OUT)
2064 return initio_bad_seq(host);
2065
2066 outb(MSG_ABORT_TAG, host->addr + TUL_SFifo);
2067 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2068
2069 return initio_wait_disc(host);
2070
2071}
2072
2073/**
2074 * initio_msgin - Message in
2075 * @host: InitIO Host
2076 *
2077 * Process incoming message
2078 */
2079static int initio_msgin(struct initio_host * host)
2080{
2081 struct target_control *active_tc;
2082
2083 for (;;) {
2084 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2085
2086 outl(1, host->addr + TUL_SCnt0);
2087 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2088 if (wait_tulip(host) == -1)
2089 return -1;
2090
2091 switch (inb(host->addr + TUL_SFifo)) {
2092 case MSG_DISC: /* Disconnect msg */
2093 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2094 return initio_wait_disc(host);
2095 case MSG_SDP:
2096 case MSG_RESTORE:
2097 case MSG_NOP:
2098 initio_msgin_accept(host);
2099 break;
2100 case MSG_REJ: /* Clear ATN first */
2101 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)),
2102 host->addr + TUL_SSignal);
2103 active_tc = host->active_tc;
2104 if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) /* do sync nego */
2105 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN),
2106 host->addr + TUL_SSignal);
2107 initio_msgin_accept(host);
2108 break;
2109 case MSG_EXTEND: /* extended msg */
2110 initio_msgin_extend(host);
2111 break;
2112 case MSG_IGNOREWIDE:
2113 initio_msgin_accept(host);
2114 break;
2115 case MSG_COMP:
2116 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2117 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2118 return initio_wait_done_disc(host);
2119 default:
2120 initio_msgout_reject(host);
2121 break;
2122 }
2123 if (host->phase != MSG_IN)
2124 return host->phase;
2125 }
2126 /* statement won't reach here */
2127}
2128
2129static int initio_msgout_reject(struct initio_host * host)
2130{
2131 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2132
2133 if (initio_msgin_accept(host) == -1)
2134 return -1;
2135
2136 if (host->phase == MSG_OUT) {
2137 outb(MSG_REJ, host->addr + TUL_SFifo); /* Msg reject */
2138 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2139 return wait_tulip(host);
2140 }
2141 return host->phase;
2142}
2143
2144static int initio_msgout_ide(struct initio_host * host)
2145{
2146 outb(MSG_IDE, host->addr + TUL_SFifo); /* Initiator Detected Error */
2147 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2148 return wait_tulip(host);
2149}
2150
2151static int initio_msgin_extend(struct initio_host * host)
2152{
2153 u8 len, idx;
2154
2155 if (initio_msgin_accept(host) != MSG_IN)
2156 return host->phase;
2157
2158 /* Get extended msg length */
2159 outl(1, host->addr + TUL_SCnt0);
2160 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2161 if (wait_tulip(host) == -1)
2162 return -1;
2163
2164 len = inb(host->addr + TUL_SFifo);
2165 host->msg[0] = len;
2166 for (idx = 1; len != 0; len--) {
2167
2168 if ((initio_msgin_accept(host)) != MSG_IN)
2169 return host->phase;
2170 outl(1, host->addr + TUL_SCnt0);
2171 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2172 if (wait_tulip(host) == -1)
2173 return -1;
2174 host->msg[idx++] = inb(host->addr + TUL_SFifo);
2175 }
2176 if (host->msg[1] == 1) { /* if it's synchronous data transfer request */
2177 u8 r;
2178 if (host->msg[0] != 3) /* if length is not right */
2179 return initio_msgout_reject(host);
2180 if (host->active_tc->flags & TCF_NO_SYNC_NEGO) { /* Set OFFSET=0 to do async, nego back */
2181 host->msg[3] = 0;
2182 } else {
2183 if (initio_msgin_sync(host) == 0 &&
2184 (host->active_tc->flags & TCF_SYNC_DONE)) {
2185 initio_sync_done(host);
2186 return initio_msgin_accept(host);
2187 }
2188 }
2189
2190 r = inb(host->addr + TUL_SSignal);
2191 outb((r & (TSC_SET_ACK | 7)) | TSC_SET_ATN,
2192 host->addr + TUL_SSignal);
2193 if (initio_msgin_accept(host) != MSG_OUT)
2194 return host->phase;
2195 /* sync msg out */
2196 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2197
2198 initio_sync_done(host);
2199
2200 outb(MSG_EXTEND, host->addr + TUL_SFifo);
2201 outb(3, host->addr + TUL_SFifo);
2202 outb(1, host->addr + TUL_SFifo);
2203 outb(host->msg[2], host->addr + TUL_SFifo);
2204 outb(host->msg[3], host->addr + TUL_SFifo);
2205 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2206 return wait_tulip(host);
2207 }
2208 if (host->msg[0] != 2 || host->msg[1] != 3)
2209 return initio_msgout_reject(host);
2210 /* if it's WIDE DATA XFER REQ */
2211 if (host->active_tc->flags & TCF_NO_WDTR) {
2212 host->msg[2] = 0;
2213 } else {
2214 if (host->msg[2] > 2) /* > 32 bits */
2215 return initio_msgout_reject(host);
2216 if (host->msg[2] == 2) { /* == 32 */
2217 host->msg[2] = 1;
2218 } else {
2219 if ((host->active_tc->flags & TCF_NO_WDTR) == 0) {
2220 wdtr_done(host);
2221 if ((host->active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0)
2222 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2223 return initio_msgin_accept(host);
2224 }
2225 }
2226 }
2227 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2228
2229 if (initio_msgin_accept(host) != MSG_OUT)
2230 return host->phase;
2231 /* WDTR msg out */
2232 outb(MSG_EXTEND, host->addr + TUL_SFifo);
2233 outb(2, host->addr + TUL_SFifo);
2234 outb(3, host->addr + TUL_SFifo);
2235 outb(host->msg[2], host->addr + TUL_SFifo);
2236 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2237 return wait_tulip(host);
2238}
2239
2240static int initio_msgin_sync(struct initio_host * host)
2241{
2242 char default_period;
2243
2244 default_period = initio_rate_tbl[host->active_tc->flags & TCF_SCSI_RATE];
2245 if (host->msg[3] > MAX_OFFSET) {
2246 host->msg[3] = MAX_OFFSET;
2247 if (host->msg[2] < default_period) {
2248 host->msg[2] = default_period;
2249 return 1;
2250 }
2251 if (host->msg[2] >= 59) /* Change to async */
2252 host->msg[3] = 0;
2253 return 1;
2254 }
2255 /* offset requests asynchronous transfers ? */
2256 if (host->msg[3] == 0) {
2257 return 0;
2258 }
2259 if (host->msg[2] < default_period) {
2260 host->msg[2] = default_period;
2261 return 1;
2262 }
2263 if (host->msg[2] >= 59) {
2264 host->msg[3] = 0;
2265 return 1;
2266 }
2267 return 0;
2268}
2269
2270static int wdtr_done(struct initio_host * host)
2271{
2272 host->active_tc->flags &= ~TCF_SYNC_DONE;
2273 host->active_tc->flags |= TCF_WDTR_DONE;
2274
2275 host->active_tc->js_period = 0;
2276 if (host->msg[2]) /* if 16 bit */
2277 host->active_tc->js_period |= TSC_WIDE_SCSI;
2278 host->active_tc->sconfig0 &= ~TSC_ALT_PERIOD;
2279 outb(host->active_tc->sconfig0, host->addr + TUL_SConfig);
2280 outb(host->active_tc->js_period, host->addr + TUL_SPeriod);
2281
2282 return 1;
2283}
2284
2285static int initio_sync_done(struct initio_host * host)
2286{
2287 int i;
2288
2289 host->active_tc->flags |= TCF_SYNC_DONE;
2290
2291 if (host->msg[3]) {
2292 host->active_tc->js_period |= host->msg[3];
2293 for (i = 0; i < 8; i++) {
2294 if (initio_rate_tbl[i] >= host->msg[2]) /* pick the big one */
2295 break;
2296 }
2297 host->active_tc->js_period |= (i << 4);
2298 host->active_tc->sconfig0 |= TSC_ALT_PERIOD;
2299 }
2300 outb(host->active_tc->sconfig0, host->addr + TUL_SConfig);
2301 outb(host->active_tc->js_period, host->addr + TUL_SPeriod);
2302
2303 return -1;
2304}
2305
2306
2307static int initio_post_scsi_rst(struct initio_host * host)
2308{
2309 struct scsi_ctrl_blk *scb;
2310 struct target_control *active_tc;
2311 int i;
2312
2313 host->active = NULL;
2314 host->active_tc = NULL;
2315 host->flags = 0;
2316
2317 while ((scb = initio_pop_busy_scb(host)) != NULL) {
2318 scb->hastat = HOST_BAD_PHAS;
2319 initio_append_done_scb(host, scb);
2320 }
2321 /* clear sync done flag */
2322 active_tc = &host->targets[0];
2323 for (i = 0; i < host->max_tar; active_tc++, i++) {
2324 active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
2325 /* Initialize the sync. xfer register values to an asyn xfer */
2326 active_tc->js_period = 0;
2327 active_tc->sconfig0 = host->sconf1;
2328 host->act_tags[0] = 0; /* 07/22/98 */
2329 host->targets[i].flags &= ~TCF_BUSY; /* 07/22/98 */
2330 } /* for */
2331
2332 return -1;
2333}
2334
2335static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb)
2336{
2337 scb->status |= SCB_SELECT;
2338 scb->next_state = 0x1;
2339 host->active = scb;
2340 host->active_tc = &host->targets[scb->target];
2341 outb(TSC_SELATNSTOP, host->addr + TUL_SCmd);
2342}
2343
2344
2345static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb)
2346{
2347 int i;
2348
2349 scb->status |= SCB_SELECT;
2350 scb->next_state = 0x2;
2351
2352 outb(scb->ident, host->addr + TUL_SFifo);
2353 for (i = 0; i < (int) scb->cdblen; i++)
2354 outb(scb->cdb[i], host->addr + TUL_SFifo);
2355 host->active_tc = &host->targets[scb->target];
2356 host->active = scb;
2357 outb(TSC_SEL_ATN, host->addr + TUL_SCmd);
2358}
2359
2360static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb)
2361{
2362 int i;
2363
2364 scb->status |= SCB_SELECT;
2365 scb->next_state = 0x2;
2366
2367 outb(scb->ident, host->addr + TUL_SFifo);
2368 outb(scb->tagmsg, host->addr + TUL_SFifo);
2369 outb(scb->tagid, host->addr + TUL_SFifo);
2370 for (i = 0; i < scb->cdblen; i++)
2371 outb(scb->cdb[i], host->addr + TUL_SFifo);
2372 host->active_tc = &host->targets[scb->target];
2373 host->active = scb;
2374 outb(TSC_SEL_ATN3, host->addr + TUL_SCmd);
2375}
2376
2377/**
2378 * initio_bus_device_reset - SCSI Bus Device Reset
2379 * @host: InitIO host to reset
2380 *
2381 * Perform a device reset and abort all pending SCBs for the
2382 * victim device
2383 */
2384int initio_bus_device_reset(struct initio_host * host)
2385{
2386 struct scsi_ctrl_blk *scb = host->active;
2387 struct target_control *active_tc = host->active_tc;
2388 struct scsi_ctrl_blk *tmp, *prev;
2389 u8 tar;
2390
2391 if (host->phase != MSG_OUT)
2392 return int_initio_bad_seq(host); /* Unexpected phase */
2393
2394 initio_unlink_pend_scb(host, scb);
2395 initio_release_scb(host, scb);
2396
2397
2398 tar = scb->target; /* target */
2399 active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE | TCF_BUSY);
2400 /* clr sync. nego & WDTR flags 07/22/98 */
2401
2402 /* abort all SCB with same target */
2403 prev = tmp = host->first_busy; /* Check Busy queue */
2404 while (tmp != NULL) {
2405 if (tmp->target == tar) {
2406 /* unlink it */
2407 if (tmp == host->first_busy) {
2408 if ((host->first_busy = tmp->next) == NULL)
2409 host->last_busy = NULL;
2410 } else {
2411 prev->next = tmp->next;
2412 if (tmp == host->last_busy)
2413 host->last_busy = prev;
2414 }
2415 tmp->hastat = HOST_ABORTED;
2416 initio_append_done_scb(host, tmp);
2417 }
2418 /* Previous haven't change */
2419 else {
2420 prev = tmp;
2421 }
2422 tmp = tmp->next;
2423 }
2424 outb(MSG_DEVRST, host->addr + TUL_SFifo);
2425 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2426 return initio_wait_disc(host);
2427
2428}
2429
2430static int initio_msgin_accept(struct initio_host * host)
2431{
2432 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2433 return wait_tulip(host);
2434}
2435
2436static int wait_tulip(struct initio_host * host)
2437{
2438
2439 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0))
2440 & TSS_INT_PENDING))
2441 cpu_relax();
2442
2443 host->jsint = inb(host->addr + TUL_SInt);
2444 host->phase = host->jsstatus0 & TSS_PH_MASK;
2445 host->jsstatus1 = inb(host->addr + TUL_SStatus1);
2446
2447 if (host->jsint & TSS_RESEL_INT) /* if SCSI bus reset detected */
2448 return int_initio_resel(host);
2449 if (host->jsint & TSS_SEL_TIMEOUT) /* if selected/reselected timeout interrupt */
2450 return int_initio_busfree(host);
2451 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */
2452 return int_initio_scsi_rst(host);
2453
2454 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
2455 if (host->flags & HCF_EXPECT_DONE_DISC) {
2456 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2457 initio_unlink_busy_scb(host, host->active);
2458 host->active->hastat = 0;
2459 initio_append_done_scb(host, host->active);
2460 host->active = NULL;
2461 host->active_tc = NULL;
2462 host->flags &= ~HCF_EXPECT_DONE_DISC;
2463 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2464 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2465 return -1;
2466 }
2467 if (host->flags & HCF_EXPECT_DISC) {
2468 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2469 host->active = NULL;
2470 host->active_tc = NULL;
2471 host->flags &= ~HCF_EXPECT_DISC;
2472 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2473 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2474 return -1;
2475 }
2476 return int_initio_busfree(host);
2477 }
2478 /* The old code really does the below. Can probably be removed */
2479 if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV))
2480 return host->phase;
2481 return host->phase;
2482}
2483
2484static int initio_wait_disc(struct initio_host * host)
2485{
2486 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING))
2487 cpu_relax();
2488
2489 host->jsint = inb(host->addr + TUL_SInt);
2490
2491 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */
2492 return int_initio_scsi_rst(host);
2493 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
2494 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2495 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2496 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2497 host->active = NULL;
2498 return -1;
2499 }
2500 return initio_bad_seq(host);
2501}
2502
2503static int initio_wait_done_disc(struct initio_host * host)
2504{
2505 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0))
2506 & TSS_INT_PENDING))
2507 cpu_relax();
2508
2509 host->jsint = inb(host->addr + TUL_SInt);
2510
2511 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */
2512 return int_initio_scsi_rst(host);
2513 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
2514 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2515 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2516 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2517 initio_unlink_busy_scb(host, host->active);
2518
2519 initio_append_done_scb(host, host->active);
2520 host->active = NULL;
2521 return -1;
2522 }
2523 return initio_bad_seq(host);
2524}
2525
2526/**
2527 * i91u_intr - IRQ handler
2528 * @irqno: IRQ number
2529 * @dev_id: IRQ identifier
2530 *
2531 * Take the relevant locks and then invoke the actual isr processing
2532 * code under the lock.
2533 */
2534
2535static irqreturn_t i91u_intr(int irqno, void *dev_id)
2536{
2537 struct Scsi_Host *dev = dev_id;
2538 unsigned long flags;
2539 int r;
2540
2541 spin_lock_irqsave(dev->host_lock, flags);
2542 r = initio_isr((struct initio_host *)dev->hostdata);
2543 spin_unlock_irqrestore(dev->host_lock, flags);
2544 if (r)
2545 return IRQ_HANDLED;
2546 else
2547 return IRQ_NONE;
2548}
2549
2550
2551/**
2552 * initio_build_scb - Build the mappings and SCB
2553 * @host: InitIO host taking the command
2554 * @cblk: Firmware command block
2555 * @cmnd: SCSI midlayer command block
2556 *
2557 * Translate the abstract SCSI command into a firmware command block
2558 * suitable for feeding to the InitIO host controller. This also requires
2559 * we build the scatter gather lists and ensure they are mapped properly.
2560 */
2561
2562static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * cblk, struct scsi_cmnd * cmnd)
2563{ /* Create corresponding SCB */
2564 struct scatterlist *sglist;
2565 struct sg_entry *sg; /* Pointer to SG list */
2566 int i, nseg;
2567 long total_len;
2568 dma_addr_t dma_addr;
2569
2570 /* Fill in the command headers */
2571 cblk->post = i91uSCBPost; /* i91u's callback routine */
2572 cblk->srb = cmnd;
2573 cblk->opcode = ExecSCSI;
2574 cblk->flags = SCF_POST; /* After SCSI done, call post routine */
2575 cblk->target = cmnd->device->id;
2576 cblk->lun = cmnd->device->lun;
2577 cblk->ident = cmnd->device->lun | DISC_ALLOW;
2578
2579 cblk->flags |= SCF_SENSE; /* Turn on auto request sense */
2580
2581 /* Map the sense buffer into bus memory */
2582 dma_addr = dma_map_single(&host->pci_dev->dev, cmnd->sense_buffer,
2583 SENSE_SIZE, DMA_FROM_DEVICE);
2584 cblk->senseptr = (u32)dma_addr;
2585 cblk->senselen = SENSE_SIZE;
2586 cmnd->SCp.ptr = (char *)(unsigned long)dma_addr;
2587 cblk->cdblen = cmnd->cmd_len;
2588
2589 /* Clear the returned status */
2590 cblk->hastat = 0;
2591 cblk->tastat = 0;
2592 /* Command the command */
2593 memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len);
2594
2595 /* Set up tags */
2596 if (cmnd->device->tagged_supported) { /* Tag Support */
2597 cblk->tagmsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */
2598 } else {
2599 cblk->tagmsg = 0; /* No tag support */
2600 }
2601
2602 /* todo handle map_sg error */
2603 nseg = scsi_dma_map(cmnd);
2604 BUG_ON(nseg < 0);
2605 if (nseg) {
2606 dma_addr = dma_map_single(&host->pci_dev->dev, &cblk->sglist[0],
2607 sizeof(struct sg_entry) * TOTAL_SG_ENTRY,
2608 DMA_BIDIRECTIONAL);
2609 cblk->bufptr = (u32)dma_addr;
2610 cmnd->SCp.dma_handle = dma_addr;
2611
2612 cblk->sglen = nseg;
2613
2614 cblk->flags |= SCF_SG; /* Turn on SG list flag */
2615 total_len = 0;
2616 sg = &cblk->sglist[0];
2617 scsi_for_each_sg(cmnd, sglist, cblk->sglen, i) {
2618 sg->data = cpu_to_le32((u32)sg_dma_address(sglist));
2619 sg->len = cpu_to_le32((u32)sg_dma_len(sglist));
2620 total_len += sg_dma_len(sglist);
2621 ++sg;
2622 }
2623
2624 cblk->buflen = (scsi_bufflen(cmnd) > total_len) ?
2625 total_len : scsi_bufflen(cmnd);
2626 } else { /* No data transfer required */
2627 cblk->buflen = 0;
2628 cblk->sglen = 0;
2629 }
2630}
2631
2632/**
2633 * i91u_queuecommand - Queue a new command if possible
2634 * @cmd: SCSI command block from the mid layer
2635 * @done: Completion handler
2636 *
2637 * Attempts to queue a new command with the host adapter. Will return
2638 * zero if successful or indicate a host busy condition if not (which
2639 * will cause the mid layer to call us again later with the command)
2640 */
2641
2642static int i91u_queuecommand_lck(struct scsi_cmnd *cmd,
2643 void (*done)(struct scsi_cmnd *))
2644{
2645 struct initio_host *host = (struct initio_host *) cmd->device->host->hostdata;
2646 struct scsi_ctrl_blk *cmnd;
2647
2648 cmd->scsi_done = done;
2649
2650 cmnd = initio_alloc_scb(host);
2651 if (!cmnd)
2652 return SCSI_MLQUEUE_HOST_BUSY;
2653
2654 initio_build_scb(host, cmnd, cmd);
2655 initio_exec_scb(host, cmnd);
2656 return 0;
2657}
2658
2659static DEF_SCSI_QCMD(i91u_queuecommand)
2660
2661/**
2662 * i91u_bus_reset - reset the SCSI bus
2663 * @cmnd: Command block we want to trigger the reset for
2664 *
2665 * Initiate a SCSI bus reset sequence
2666 */
2667
2668static int i91u_bus_reset(struct scsi_cmnd * cmnd)
2669{
2670 struct initio_host *host;
2671
2672 host = (struct initio_host *) cmnd->device->host->hostdata;
2673
2674 spin_lock_irq(cmnd->device->host->host_lock);
2675 initio_reset_scsi(host, 0);
2676 spin_unlock_irq(cmnd->device->host->host_lock);
2677
2678 return SUCCESS;
2679}
2680
2681/**
2682 * i91u_biospararm - return the "logical geometry
2683 * @sdev: SCSI device
2684 * @dev; Matching block device
2685 * @capacity: Sector size of drive
2686 * @info_array: Return space for BIOS geometry
2687 *
2688 * Map the device geometry in a manner compatible with the host
2689 * controller BIOS behaviour.
2690 *
2691 * FIXME: limited to 2^32 sector devices.
2692 */
2693
2694static int i91u_biosparam(struct scsi_device *sdev, struct block_device *dev,
2695 sector_t capacity, int *info_array)
2696{
2697 struct initio_host *host; /* Point to Host adapter control block */
2698 struct target_control *tc;
2699
2700 host = (struct initio_host *) sdev->host->hostdata;
2701 tc = &host->targets[sdev->id];
2702
2703 if (tc->heads) {
2704 info_array[0] = tc->heads;
2705 info_array[1] = tc->sectors;
2706 info_array[2] = (unsigned long)capacity / tc->heads / tc->sectors;
2707 } else {
2708 if (tc->drv_flags & TCF_DRV_255_63) {
2709 info_array[0] = 255;
2710 info_array[1] = 63;
2711 info_array[2] = (unsigned long)capacity / 255 / 63;
2712 } else {
2713 info_array[0] = 64;
2714 info_array[1] = 32;
2715 info_array[2] = (unsigned long)capacity >> 11;
2716 }
2717 }
2718
2719#if defined(DEBUG_BIOSPARAM)
2720 if (i91u_debug & debug_biosparam) {
2721 printk("bios geometry: head=%d, sec=%d, cyl=%d\n",
2722 info_array[0], info_array[1], info_array[2]);
2723 printk("WARNING: check, if the bios geometry is correct.\n");
2724 }
2725#endif
2726
2727 return 0;
2728}
2729
2730/**
2731 * i91u_unmap_scb - Unmap a command
2732 * @pci_dev: PCI device the command is for
2733 * @cmnd: The command itself
2734 *
2735 * Unmap any PCI mapping/IOMMU resources allocated when the command
2736 * was mapped originally as part of initio_build_scb
2737 */
2738
2739static void i91u_unmap_scb(struct pci_dev *pci_dev, struct scsi_cmnd *cmnd)
2740{
2741 /* auto sense buffer */
2742 if (cmnd->SCp.ptr) {
2743 dma_unmap_single(&pci_dev->dev,
2744 (dma_addr_t)((unsigned long)cmnd->SCp.ptr),
2745 SENSE_SIZE, DMA_FROM_DEVICE);
2746 cmnd->SCp.ptr = NULL;
2747 }
2748
2749 /* request buffer */
2750 if (scsi_sg_count(cmnd)) {
2751 dma_unmap_single(&pci_dev->dev, cmnd->SCp.dma_handle,
2752 sizeof(struct sg_entry) * TOTAL_SG_ENTRY,
2753 DMA_BIDIRECTIONAL);
2754
2755 scsi_dma_unmap(cmnd);
2756 }
2757}
2758
2759/**
2760 * i91uSCBPost - SCSI callback
2761 * @host: Pointer to host adapter control block.
2762 * @cmnd: Pointer to SCSI control block.
2763 *
2764 * This is callback routine be called when tulip finish one
2765 * SCSI command.
2766 */
2767
2768static void i91uSCBPost(u8 * host_mem, u8 * cblk_mem)
2769{
2770 struct scsi_cmnd *cmnd; /* Pointer to SCSI request block */
2771 struct initio_host *host;
2772 struct scsi_ctrl_blk *cblk;
2773
2774 host = (struct initio_host *) host_mem;
2775 cblk = (struct scsi_ctrl_blk *) cblk_mem;
2776 if ((cmnd = cblk->srb) == NULL) {
2777 printk(KERN_ERR "i91uSCBPost: SRB pointer is empty\n");
2778 WARN_ON(1);
2779 initio_release_scb(host, cblk); /* Release SCB for current channel */
2780 return;
2781 }
2782
2783 /*
2784 * Remap the firmware error status into a mid layer one
2785 */
2786 switch (cblk->hastat) {
2787 case 0x0:
2788 case 0xa: /* Linked command complete without error and linked normally */
2789 case 0xb: /* Linked command complete without error interrupt generated */
2790 cblk->hastat = 0;
2791 break;
2792
2793 case 0x11: /* Selection time out-The initiator selection or target
2794 reselection was not complete within the SCSI Time out period */
2795 cblk->hastat = DID_TIME_OUT;
2796 break;
2797
2798 case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus
2799 phase sequence was requested by the target. The host adapter
2800 will generate a SCSI Reset Condition, notifying the host with
2801 a SCRD interrupt */
2802 cblk->hastat = DID_RESET;
2803 break;
2804
2805 case 0x1a: /* SCB Aborted. 07/21/98 */
2806 cblk->hastat = DID_ABORT;
2807 break;
2808
2809 case 0x12: /* Data overrun/underrun-The target attempted to transfer more data
2810 than was allocated by the Data Length field or the sum of the
2811 Scatter / Gather Data Length fields. */
2812 case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
2813 case 0x16: /* Invalid SCB Operation Code. */
2814
2815 default:
2816 printk("ini9100u: %x %x\n", cblk->hastat, cblk->tastat);
2817 cblk->hastat = DID_ERROR; /* Couldn't find any better */
2818 break;
2819 }
2820
2821 cmnd->result = cblk->tastat | (cblk->hastat << 16);
2822 i91u_unmap_scb(host->pci_dev, cmnd);
2823 cmnd->scsi_done(cmnd); /* Notify system DONE */
2824 initio_release_scb(host, cblk); /* Release SCB for current channel */
2825}
2826
2827static struct scsi_host_template initio_template = {
2828 .proc_name = "INI9100U",
2829 .name = "Initio INI-9X00U/UW SCSI device driver",
2830 .queuecommand = i91u_queuecommand,
2831 .eh_bus_reset_handler = i91u_bus_reset,
2832 .bios_param = i91u_biosparam,
2833 .can_queue = MAX_TARGETS * i91u_MAXQUEUE,
2834 .this_id = 1,
2835 .sg_tablesize = SG_ALL,
2836 .cmd_per_lun = 1,
2837 .use_clustering = ENABLE_CLUSTERING,
2838};
2839
2840static int initio_probe_one(struct pci_dev *pdev,
2841 const struct pci_device_id *id)
2842{
2843 struct Scsi_Host *shost;
2844 struct initio_host *host;
2845 u32 reg;
2846 u16 bios_seg;
2847 struct scsi_ctrl_blk *scb, *tmp, *prev = NULL /* silence gcc */;
2848 int num_scb, i, error;
2849
2850 error = pci_enable_device(pdev);
2851 if (error)
2852 return error;
2853
2854 pci_read_config_dword(pdev, 0x44, (u32 *) & reg);
2855 bios_seg = (u16) (reg & 0xFF);
2856 if (((reg & 0xFF00) >> 8) == 0xFF)
2857 reg = 0;
2858 bios_seg = (bios_seg << 8) + ((u16) ((reg & 0xFF00) >> 8));
2859
2860 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
2861 printk(KERN_WARNING "i91u: Could not set 32 bit DMA mask\n");
2862 error = -ENODEV;
2863 goto out_disable_device;
2864 }
2865 shost = scsi_host_alloc(&initio_template, sizeof(struct initio_host));
2866 if (!shost) {
2867 printk(KERN_WARNING "initio: Could not allocate host structure.\n");
2868 error = -ENOMEM;
2869 goto out_disable_device;
2870 }
2871 host = (struct initio_host *)shost->hostdata;
2872 memset(host, 0, sizeof(struct initio_host));
2873 host->addr = pci_resource_start(pdev, 0);
2874 host->bios_addr = bios_seg;
2875
2876 if (!request_region(host->addr, 256, "i91u")) {
2877 printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr);
2878 error = -ENODEV;
2879 goto out_host_put;
2880 }
2881
2882 if (initio_tag_enable) /* 1.01i */
2883 num_scb = MAX_TARGETS * i91u_MAXQUEUE;
2884 else
2885 num_scb = MAX_TARGETS + 3; /* 1-tape, 1-CD_ROM, 1- extra */
2886
2887 for (; num_scb >= MAX_TARGETS + 3; num_scb--) {
2888 i = num_scb * sizeof(struct scsi_ctrl_blk);
2889 if ((scb = kzalloc(i, GFP_DMA)) != NULL)
2890 break;
2891 }
2892
2893 if (!scb) {
2894 printk(KERN_WARNING "initio: Cannot allocate SCB array.\n");
2895 error = -ENOMEM;
2896 goto out_release_region;
2897 }
2898
2899 host->pci_dev = pdev;
2900
2901 host->semaph = 1;
2902 spin_lock_init(&host->semaph_lock);
2903 host->num_scbs = num_scb;
2904 host->scb = scb;
2905 host->next_pending = scb;
2906 host->next_avail = scb;
2907 for (i = 0, tmp = scb; i < num_scb; i++, tmp++) {
2908 tmp->tagid = i;
2909 if (i != 0)
2910 prev->next = tmp;
2911 prev = tmp;
2912 }
2913 prev->next = NULL;
2914 host->scb_end = tmp;
2915 host->first_avail = scb;
2916 host->last_avail = prev;
2917 spin_lock_init(&host->avail_lock);
2918
2919 initio_init(host, phys_to_virt(((u32)bios_seg << 4)));
2920
2921 host->jsstatus0 = 0;
2922
2923 shost->io_port = host->addr;
2924 shost->n_io_port = 0xff;
2925 shost->can_queue = num_scb; /* 03/05/98 */
2926 shost->unique_id = host->addr;
2927 shost->max_id = host->max_tar;
2928 shost->max_lun = 32; /* 10/21/97 */
2929 shost->irq = pdev->irq;
2930 shost->this_id = host->scsi_id; /* Assign HCS index */
2931 shost->base = host->addr;
2932 shost->sg_tablesize = TOTAL_SG_ENTRY;
2933
2934 error = request_irq(pdev->irq, i91u_intr, IRQF_SHARED, "i91u", shost);
2935 if (error < 0) {
2936 printk(KERN_WARNING "initio: Unable to request IRQ %d\n", pdev->irq);
2937 goto out_free_scbs;
2938 }
2939
2940 pci_set_drvdata(pdev, shost);
2941
2942 error = scsi_add_host(shost, &pdev->dev);
2943 if (error)
2944 goto out_free_irq;
2945 scsi_scan_host(shost);
2946 return 0;
2947out_free_irq:
2948 free_irq(pdev->irq, shost);
2949out_free_scbs:
2950 kfree(host->scb);
2951out_release_region:
2952 release_region(host->addr, 256);
2953out_host_put:
2954 scsi_host_put(shost);
2955out_disable_device:
2956 pci_disable_device(pdev);
2957 return error;
2958}
2959
2960/**
2961 * initio_remove_one - control shutdown
2962 * @pdev: PCI device being released
2963 *
2964 * Release the resources assigned to this adapter after it has
2965 * finished being used.
2966 */
2967
2968static void initio_remove_one(struct pci_dev *pdev)
2969{
2970 struct Scsi_Host *host = pci_get_drvdata(pdev);
2971 struct initio_host *s = (struct initio_host *)host->hostdata;
2972 scsi_remove_host(host);
2973 free_irq(pdev->irq, host);
2974 release_region(s->addr, 256);
2975 scsi_host_put(host);
2976 pci_disable_device(pdev);
2977}
2978
2979MODULE_LICENSE("GPL");
2980
2981static struct pci_device_id initio_pci_tbl[] = {
2982 {PCI_VENDOR_ID_INIT, 0x9500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2983 {PCI_VENDOR_ID_INIT, 0x9400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2984 {PCI_VENDOR_ID_INIT, 0x9401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2985 {PCI_VENDOR_ID_INIT, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2986 {PCI_VENDOR_ID_DOMEX, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2987 {0,}
2988};
2989MODULE_DEVICE_TABLE(pci, initio_pci_tbl);
2990
2991static struct pci_driver initio_pci_driver = {
2992 .name = "initio",
2993 .id_table = initio_pci_tbl,
2994 .probe = initio_probe_one,
2995 .remove = initio_remove_one,
2996};
2997
2998static int __init initio_init_driver(void)
2999{
3000 return pci_register_driver(&initio_pci_driver);
3001}
3002
3003static void __exit initio_exit_driver(void)
3004{
3005 pci_unregister_driver(&initio_pci_driver);
3006}
3007
3008MODULE_DESCRIPTION("Initio INI-9X00U/UW SCSI device driver");
3009MODULE_AUTHOR("Initio Corporation");
3010MODULE_LICENSE("GPL");
3011
3012module_init(initio_init_driver);
3013module_exit(initio_exit_driver);
1// SPDX-License-Identifier: GPL-2.0-or-later
2/**************************************************************************
3 * Initio 9100 device driver for Linux.
4 *
5 * Copyright (c) 1994-1998 Initio Corporation
6 * Copyright (c) 1998 Bas Vermeulen <bvermeul@blackstar.xs4all.nl>
7 * Copyright (c) 2004 Christoph Hellwig <hch@lst.de>
8 * Copyright (c) 2007 Red Hat
9 *
10 *************************************************************************
11 *
12 * DESCRIPTION:
13 *
14 * This is the Linux low-level SCSI driver for Initio INI-9X00U/UW SCSI host
15 * adapters
16 *
17 * 08/06/97 hc - v1.01h
18 * - Support inic-940 and inic-935
19 * 09/26/97 hc - v1.01i
20 * - Make correction from J.W. Schultz suggestion
21 * 10/13/97 hc - Support reset function
22 * 10/21/97 hc - v1.01j
23 * - Support 32 LUN (SCSI 3)
24 * 01/14/98 hc - v1.01k
25 * - Fix memory allocation problem
26 * 03/04/98 hc - v1.01l
27 * - Fix tape rewind which will hang the system problem
28 * - Set can_queue to initio_num_scb
29 * 06/25/98 hc - v1.01m
30 * - Get it work for kernel version >= 2.1.75
31 * - Dynamic assign SCSI bus reset holding time in initio_init()
32 * 07/02/98 hc - v1.01n
33 * - Support 0002134A
34 * 08/07/98 hc - v1.01o
35 * - Change the initio_abort_srb routine to use scsi_done. <01>
36 * 09/07/98 hl - v1.02
37 * - Change the INI9100U define and proc_dir_entry to
38 * reflect the newer Kernel 2.1.118, but the v1.o1o
39 * should work with Kernel 2.1.118.
40 * 09/20/98 wh - v1.02a
41 * - Support Abort command.
42 * - Handle reset routine.
43 * 09/21/98 hl - v1.03
44 * - remove comments.
45 * 12/09/98 bv - v1.03a
46 * - Removed unused code
47 * 12/13/98 bv - v1.03b
48 * - Remove cli() locking for kernels >= 2.1.95. This uses
49 * spinlocks to serialize access to the pSRB_head and
50 * pSRB_tail members of the HCS structure.
51 * 09/01/99 bv - v1.03d
52 * - Fixed a deadlock problem in SMP.
53 * 21/01/99 bv - v1.03e
54 * - Add support for the Domex 3192U PCI SCSI
55 * This is a slightly modified patch by
56 * Brian Macy <bmacy@sunshinecomputing.com>
57 * 22/02/99 bv - v1.03f
58 * - Didn't detect the INIC-950 in 2.0.x correctly.
59 * Now fixed.
60 * 05/07/99 bv - v1.03g
61 * - Changed the assumption that HZ = 100
62 * 10/17/03 mc - v1.04
63 * - added new DMA API support
64 * 06/01/04 jmd - v1.04a
65 * - Re-add reset_bus support
66 **************************************************************************/
67
68#include <linux/module.h>
69#include <linux/errno.h>
70#include <linux/delay.h>
71#include <linux/pci.h>
72#include <linux/init.h>
73#include <linux/blkdev.h>
74#include <linux/spinlock.h>
75#include <linux/stat.h>
76#include <linux/kernel.h>
77#include <linux/proc_fs.h>
78#include <linux/string.h>
79#include <linux/interrupt.h>
80#include <linux/ioport.h>
81#include <linux/slab.h>
82#include <linux/jiffies.h>
83#include <linux/dma-mapping.h>
84#include <asm/io.h>
85
86#include <scsi/scsi.h>
87#include <scsi/scsi_cmnd.h>
88#include <scsi/scsi_device.h>
89#include <scsi/scsi_host.h>
90#include <scsi/scsi_tcq.h>
91
92#include "initio.h"
93
94#define SENSE_SIZE 14
95
96#define i91u_MAXQUEUE 2
97#define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a"
98
99#ifdef DEBUG_i91u
100static unsigned int i91u_debug = DEBUG_DEFAULT;
101#endif
102
103static int initio_tag_enable = 1;
104
105#ifdef DEBUG_i91u
106static int setup_debug = 0;
107#endif
108
109static void i91uSCBPost(u8 * pHcb, u8 * pScb);
110
111#define DEBUG_INTERRUPT 0
112#define DEBUG_QUEUE 0
113#define DEBUG_STATE 0
114#define INT_DISC 0
115
116/*--- forward references ---*/
117static struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun);
118static struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host);
119
120static int tulip_main(struct initio_host * host);
121
122static int initio_next_state(struct initio_host * host);
123static int initio_state_1(struct initio_host * host);
124static int initio_state_2(struct initio_host * host);
125static int initio_state_3(struct initio_host * host);
126static int initio_state_4(struct initio_host * host);
127static int initio_state_5(struct initio_host * host);
128static int initio_state_6(struct initio_host * host);
129static int initio_state_7(struct initio_host * host);
130static int initio_xfer_data_in(struct initio_host * host);
131static int initio_xfer_data_out(struct initio_host * host);
132static int initio_xpad_in(struct initio_host * host);
133static int initio_xpad_out(struct initio_host * host);
134static int initio_status_msg(struct initio_host * host);
135
136static int initio_msgin(struct initio_host * host);
137static int initio_msgin_sync(struct initio_host * host);
138static int initio_msgin_accept(struct initio_host * host);
139static int initio_msgout_reject(struct initio_host * host);
140static int initio_msgin_extend(struct initio_host * host);
141
142static int initio_msgout_ide(struct initio_host * host);
143static int initio_msgout_abort_targ(struct initio_host * host);
144static int initio_msgout_abort_tag(struct initio_host * host);
145
146static int initio_bus_device_reset(struct initio_host * host);
147static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb);
148static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb);
149static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb);
150static int int_initio_busfree(struct initio_host * host);
151static int int_initio_scsi_rst(struct initio_host * host);
152static int int_initio_bad_seq(struct initio_host * host);
153static int int_initio_resel(struct initio_host * host);
154static int initio_sync_done(struct initio_host * host);
155static int wdtr_done(struct initio_host * host);
156static int wait_tulip(struct initio_host * host);
157static int initio_wait_done_disc(struct initio_host * host);
158static int initio_wait_disc(struct initio_host * host);
159static void tulip_scsi(struct initio_host * host);
160static int initio_post_scsi_rst(struct initio_host * host);
161
162static void initio_se2_ew_en(unsigned long base);
163static void initio_se2_ew_ds(unsigned long base);
164static int initio_se2_rd_all(unsigned long base);
165static void initio_se2_update_all(unsigned long base); /* setup default pattern */
166static void initio_read_eeprom(unsigned long base);
167
168/* ---- INTERNAL VARIABLES ---- */
169
170static NVRAM i91unvram;
171static NVRAM *i91unvramp;
172
173static u8 i91udftNvRam[64] =
174{
175 /*----------- header -----------*/
176 0x25, 0xc9, /* Signature */
177 0x40, /* Size */
178 0x01, /* Revision */
179 /* -- Host Adapter Structure -- */
180 0x95, /* ModelByte0 */
181 0x00, /* ModelByte1 */
182 0x00, /* ModelInfo */
183 0x01, /* NumOfCh */
184 NBC1_DEFAULT, /* BIOSConfig1 */
185 0, /* BIOSConfig2 */
186 0, /* HAConfig1 */
187 0, /* HAConfig2 */
188 /* SCSI channel 0 and target Structure */
189 7, /* SCSIid */
190 NCC1_DEFAULT, /* SCSIconfig1 */
191 0, /* SCSIconfig2 */
192 0x10, /* NumSCSItarget */
193
194 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
195 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
196 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
197 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
198
199 /* SCSI channel 1 and target Structure */
200 7, /* SCSIid */
201 NCC1_DEFAULT, /* SCSIconfig1 */
202 0, /* SCSIconfig2 */
203 0x10, /* NumSCSItarget */
204
205 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
206 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
207 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
208 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
209 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
210 0, 0}; /* - CheckSum - */
211
212
213static u8 initio_rate_tbl[8] = /* fast 20 */
214{
215 /* nanosecond divide by 4 */
216 12, /* 50ns, 20M */
217 18, /* 75ns, 13.3M */
218 25, /* 100ns, 10M */
219 31, /* 125ns, 8M */
220 37, /* 150ns, 6.6M */
221 43, /* 175ns, 5.7M */
222 50, /* 200ns, 5M */
223 62 /* 250ns, 4M */
224};
225
226static void initio_do_pause(unsigned amount)
227{
228 /* Pause for amount jiffies */
229 unsigned long the_time = jiffies + amount;
230
231 while (time_before_eq(jiffies, the_time))
232 cpu_relax();
233}
234
235/*-- forward reference --*/
236
237/******************************************************************
238 Input: instruction for Serial E2PROM
239
240 EX: se2_rd(0 call se2_instr() to send address and read command
241
242 StartBit OP_Code Address Data
243 --------- -------- ------------------ -------
244 1 1 , 0 A5,A4,A3,A2,A1,A0 D15-D0
245
246 +-----------------------------------------------------
247 |
248 CS -----+
249 +--+ +--+ +--+ +--+ +--+
250 ^ | ^ | ^ | ^ | ^ |
251 | | | | | | | | | |
252 CLK -------+ +--+ +--+ +--+ +--+ +--
253 (leading edge trigger)
254
255 +--1-----1--+
256 | SB OP | OP A5 A4
257 DI ----+ +--0------------------
258 (address and cmd sent to nvram)
259
260 -------------------------------------------+
261 |
262 DO +---
263 (data sent from nvram)
264
265
266******************************************************************/
267
268/**
269 * initio_se2_instr - bitbang an instruction
270 * @base: Base of InitIO controller
271 * @instr: Instruction for serial E2PROM
272 *
273 * Bitbang an instruction out to the serial E2Prom
274 */
275
276static void initio_se2_instr(unsigned long base, u8 instr)
277{
278 int i;
279 u8 b;
280
281 outb(SE2CS | SE2DO, base + TUL_NVRAM); /* cs+start bit */
282 udelay(30);
283 outb(SE2CS | SE2CLK | SE2DO, base + TUL_NVRAM); /* +CLK */
284 udelay(30);
285
286 for (i = 0; i < 8; i++) {
287 if (instr & 0x80)
288 b = SE2CS | SE2DO; /* -CLK+dataBit */
289 else
290 b = SE2CS; /* -CLK */
291 outb(b, base + TUL_NVRAM);
292 udelay(30);
293 outb(b | SE2CLK, base + TUL_NVRAM); /* +CLK */
294 udelay(30);
295 instr <<= 1;
296 }
297 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
298 udelay(30);
299}
300
301
302/**
303 * initio_se2_ew_en - Enable erase/write
304 * @base: Base address of InitIO controller
305 *
306 * Enable erase/write state of serial EEPROM
307 */
308void initio_se2_ew_en(unsigned long base)
309{
310 initio_se2_instr(base, 0x30); /* EWEN */
311 outb(0, base + TUL_NVRAM); /* -CS */
312 udelay(30);
313}
314
315
316/**
317 * initio_se2_ew_ds - Disable erase/write
318 * @base: Base address of InitIO controller
319 *
320 * Disable erase/write state of serial EEPROM
321 */
322void initio_se2_ew_ds(unsigned long base)
323{
324 initio_se2_instr(base, 0); /* EWDS */
325 outb(0, base + TUL_NVRAM); /* -CS */
326 udelay(30);
327}
328
329
330/**
331 * initio_se2_rd - read E2PROM word
332 * @base: Base of InitIO controller
333 * @addr: Address of word in E2PROM
334 *
335 * Read a word from the NV E2PROM device
336 */
337static u16 initio_se2_rd(unsigned long base, u8 addr)
338{
339 u8 instr, rb;
340 u16 val = 0;
341 int i;
342
343 instr = (u8) (addr | 0x80);
344 initio_se2_instr(base, instr); /* READ INSTR */
345
346 for (i = 15; i >= 0; i--) {
347 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
348 udelay(30);
349 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
350
351 /* sample data after the following edge of clock */
352 rb = inb(base + TUL_NVRAM);
353 rb &= SE2DI;
354 val += (rb << i);
355 udelay(30); /* 6/20/95 */
356 }
357
358 outb(0, base + TUL_NVRAM); /* no chip select */
359 udelay(30);
360 return val;
361}
362
363/**
364 * initio_se2_wr - read E2PROM word
365 * @base: Base of InitIO controller
366 * @addr: Address of word in E2PROM
367 * @val: Value to write
368 *
369 * Write a word to the NV E2PROM device. Used when recovering from
370 * a problem with the NV.
371 */
372static void initio_se2_wr(unsigned long base, u8 addr, u16 val)
373{
374 u8 rb;
375 u8 instr;
376 int i;
377
378 instr = (u8) (addr | 0x40);
379 initio_se2_instr(base, instr); /* WRITE INSTR */
380 for (i = 15; i >= 0; i--) {
381 if (val & 0x8000)
382 outb(SE2CS | SE2DO, base + TUL_NVRAM); /* -CLK+dataBit 1 */
383 else
384 outb(SE2CS, base + TUL_NVRAM); /* -CLK+dataBit 0 */
385 udelay(30);
386 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
387 udelay(30);
388 val <<= 1;
389 }
390 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
391 udelay(30);
392 outb(0, base + TUL_NVRAM); /* -CS */
393 udelay(30);
394
395 outb(SE2CS, base + TUL_NVRAM); /* +CS */
396 udelay(30);
397
398 for (;;) {
399 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
400 udelay(30);
401 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
402 udelay(30);
403 if ((rb = inb(base + TUL_NVRAM)) & SE2DI)
404 break; /* write complete */
405 }
406 outb(0, base + TUL_NVRAM); /* -CS */
407}
408
409/**
410 * initio_se2_rd_all - read hostadapter NV configuration
411 * @base: Base address of InitIO controller
412 *
413 * Reads the E2PROM data into main memory. Ensures that the checksum
414 * and header marker are valid. Returns 1 on success -1 on error.
415 */
416
417static int initio_se2_rd_all(unsigned long base)
418{
419 int i;
420 u16 chksum = 0;
421 u16 *np;
422
423 i91unvramp = &i91unvram;
424 np = (u16 *) i91unvramp;
425 for (i = 0; i < 32; i++)
426 *np++ = initio_se2_rd(base, i);
427
428 /* Is signature "ini" ok ? */
429 if (i91unvramp->NVM_Signature != INI_SIGNATURE)
430 return -1;
431 /* Is ckecksum ok ? */
432 np = (u16 *) i91unvramp;
433 for (i = 0; i < 31; i++)
434 chksum += *np++;
435 if (i91unvramp->NVM_CheckSum != chksum)
436 return -1;
437 return 1;
438}
439
440/**
441 * initio_se2_update_all - Update E2PROM
442 * @base: Base of InitIO controller
443 *
444 * Update the E2PROM by wrting any changes into the E2PROM
445 * chip, rewriting the checksum.
446 */
447static void initio_se2_update_all(unsigned long base)
448{ /* setup default pattern */
449 int i;
450 u16 chksum = 0;
451 u16 *np, *np1;
452
453 i91unvramp = &i91unvram;
454 /* Calculate checksum first */
455 np = (u16 *) i91udftNvRam;
456 for (i = 0; i < 31; i++)
457 chksum += *np++;
458 *np = chksum;
459 initio_se2_ew_en(base); /* Enable write */
460
461 np = (u16 *) i91udftNvRam;
462 np1 = (u16 *) i91unvramp;
463 for (i = 0; i < 32; i++, np++, np1++) {
464 if (*np != *np1)
465 initio_se2_wr(base, i, *np);
466 }
467 initio_se2_ew_ds(base); /* Disable write */
468}
469
470/**
471 * initio_read_eeprom - Retrieve configuration
472 * @base: Base of InitIO Host Adapter
473 *
474 * Retrieve the host adapter configuration data from E2Prom. If the
475 * data is invalid then the defaults are used and are also restored
476 * into the E2PROM. This forms the access point for the SCSI driver
477 * into the E2PROM layer, the other functions for the E2PROM are all
478 * internal use.
479 *
480 * Must be called single threaded, uses a shared global area.
481 */
482
483static void initio_read_eeprom(unsigned long base)
484{
485 u8 gctrl;
486
487 i91unvramp = &i91unvram;
488 /* Enable EEProm programming */
489 gctrl = inb(base + TUL_GCTRL);
490 outb(gctrl | TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL);
491 if (initio_se2_rd_all(base) != 1) {
492 initio_se2_update_all(base); /* setup default pattern */
493 initio_se2_rd_all(base); /* load again */
494 }
495 /* Disable EEProm programming */
496 gctrl = inb(base + TUL_GCTRL);
497 outb(gctrl & ~TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL);
498}
499
500/**
501 * initio_stop_bm - stop bus master
502 * @host: InitIO we are stopping
503 *
504 * Stop any pending DMA operation, aborting the DMA if necessary
505 */
506
507static void initio_stop_bm(struct initio_host * host)
508{
509
510 if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */
511 outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd);
512 /* wait Abort DMA xfer done */
513 while ((inb(host->addr + TUL_Int) & XABT) == 0)
514 cpu_relax();
515 }
516 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
517}
518
519/**
520 * initio_reset_scsi - Reset SCSI host controller
521 * @host: InitIO host to reset
522 * @seconds: Recovery time
523 *
524 * Perform a full reset of the SCSI subsystem.
525 */
526
527static int initio_reset_scsi(struct initio_host * host, int seconds)
528{
529 outb(TSC_RST_BUS, host->addr + TUL_SCtrl0);
530
531 while (!((host->jsint = inb(host->addr + TUL_SInt)) & TSS_SCSIRST_INT))
532 cpu_relax();
533
534 /* reset tulip chip */
535 outb(0, host->addr + TUL_SSignal);
536
537 /* Stall for a while, wait for target's firmware ready,make it 2 sec ! */
538 /* SONY 5200 tape drive won't work if only stall for 1 sec */
539 /* FIXME: this is a very long busy wait right now */
540 initio_do_pause(seconds * HZ);
541
542 inb(host->addr + TUL_SInt);
543 return SCSI_RESET_SUCCESS;
544}
545
546/**
547 * initio_init - set up an InitIO host adapter
548 * @host: InitIO host adapter
549 * @num_scbs: Number of SCBS
550 * @bios_addr: BIOS address
551 *
552 * Set up the host adapter and devices according to the configuration
553 * retrieved from the E2PROM.
554 *
555 * Locking: Calls E2PROM layer code which is not re-enterable so must
556 * run single threaded for now.
557 */
558
559static void initio_init(struct initio_host * host, u8 *bios_addr)
560{
561 int i;
562 u8 *flags;
563 u8 *heads;
564
565 /* Get E2Prom configuration */
566 initio_read_eeprom(host->addr);
567 if (i91unvramp->NVM_SCSIInfo[0].NVM_NumOfTarg == 8)
568 host->max_tar = 8;
569 else
570 host->max_tar = 16;
571
572 host->config = i91unvramp->NVM_SCSIInfo[0].NVM_ChConfig1;
573
574 host->scsi_id = i91unvramp->NVM_SCSIInfo[0].NVM_ChSCSIID;
575 host->idmask = ~(1 << host->scsi_id);
576
577#ifdef CHK_PARITY
578 /* Enable parity error response */
579 outb(inb(host->addr + TUL_PCMD) | 0x40, host->addr + TUL_PCMD);
580#endif
581
582 /* Mask all the interrupt */
583 outb(0x1F, host->addr + TUL_Mask);
584
585 initio_stop_bm(host);
586 /* --- Initialize the tulip --- */
587 outb(TSC_RST_CHIP, host->addr + TUL_SCtrl0);
588
589 /* program HBA's SCSI ID */
590 outb(host->scsi_id << 4, host->addr + TUL_SScsiId);
591
592 /* Enable Initiator Mode ,phase latch,alternate sync period mode,
593 disable SCSI reset */
594 if (host->config & HCC_EN_PAR)
595 host->sconf1 = (TSC_INITDEFAULT | TSC_EN_SCSI_PAR);
596 else
597 host->sconf1 = (TSC_INITDEFAULT);
598 outb(host->sconf1, host->addr + TUL_SConfig);
599
600 /* Enable HW reselect */
601 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
602
603 outb(0, host->addr + TUL_SPeriod);
604
605 /* selection time out = 250 ms */
606 outb(153, host->addr + TUL_STimeOut);
607
608 /* Enable SCSI terminator */
609 outb((host->config & (HCC_ACT_TERM1 | HCC_ACT_TERM2)),
610 host->addr + TUL_XCtrl);
611 outb(((host->config & HCC_AUTO_TERM) >> 4) |
612 (inb(host->addr + TUL_GCTRL1) & 0xFE),
613 host->addr + TUL_GCTRL1);
614
615 for (i = 0,
616 flags = & (i91unvramp->NVM_SCSIInfo[0].NVM_Targ0Config),
617 heads = bios_addr + 0x180;
618 i < host->max_tar;
619 i++, flags++) {
620 host->targets[i].flags = *flags & ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
621 if (host->targets[i].flags & TCF_EN_255)
622 host->targets[i].drv_flags = TCF_DRV_255_63;
623 else
624 host->targets[i].drv_flags = 0;
625 host->targets[i].js_period = 0;
626 host->targets[i].sconfig0 = host->sconf1;
627 host->targets[i].heads = *heads++;
628 if (host->targets[i].heads == 255)
629 host->targets[i].drv_flags = TCF_DRV_255_63;
630 else
631 host->targets[i].drv_flags = 0;
632 host->targets[i].sectors = *heads++;
633 host->targets[i].flags &= ~TCF_BUSY;
634 host->act_tags[i] = 0;
635 host->max_tags[i] = 0xFF;
636 } /* for */
637 printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n",
638 host->addr, host->pci_dev->irq,
639 host->bios_addr, host->scsi_id);
640 /* Reset SCSI Bus */
641 if (host->config & HCC_SCSI_RESET) {
642 printk(KERN_INFO "i91u: Reset SCSI Bus ... \n");
643 initio_reset_scsi(host, 10);
644 }
645 outb(0x17, host->addr + TUL_SCFG1);
646 outb(0xE9, host->addr + TUL_SIntEnable);
647}
648
649/**
650 * initio_alloc_scb - Allocate an SCB
651 * @host: InitIO host we are allocating for
652 *
653 * Walk the SCB list for the controller and allocate a free SCB if
654 * one exists.
655 */
656static struct scsi_ctrl_blk *initio_alloc_scb(struct initio_host *host)
657{
658 struct scsi_ctrl_blk *scb;
659 unsigned long flags;
660
661 spin_lock_irqsave(&host->avail_lock, flags);
662 if ((scb = host->first_avail) != NULL) {
663#if DEBUG_QUEUE
664 printk("find scb at %p\n", scb);
665#endif
666 if ((host->first_avail = scb->next) == NULL)
667 host->last_avail = NULL;
668 scb->next = NULL;
669 scb->status = SCB_RENT;
670 }
671 spin_unlock_irqrestore(&host->avail_lock, flags);
672 return scb;
673}
674
675/**
676 * initio_release_scb - Release an SCB
677 * @host: InitIO host that owns the SCB
678 * @cmnd: SCB command block being returned
679 *
680 * Return an allocated SCB to the host free list
681 */
682
683static void initio_release_scb(struct initio_host * host, struct scsi_ctrl_blk * cmnd)
684{
685 unsigned long flags;
686
687#if DEBUG_QUEUE
688 printk("Release SCB %p; ", cmnd);
689#endif
690 spin_lock_irqsave(&(host->avail_lock), flags);
691 cmnd->srb = NULL;
692 cmnd->status = 0;
693 cmnd->next = NULL;
694 if (host->last_avail != NULL) {
695 host->last_avail->next = cmnd;
696 host->last_avail = cmnd;
697 } else {
698 host->first_avail = cmnd;
699 host->last_avail = cmnd;
700 }
701 spin_unlock_irqrestore(&(host->avail_lock), flags);
702}
703
704/***************************************************************************/
705static void initio_append_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
706{
707
708#if DEBUG_QUEUE
709 printk("Append pend SCB %p; ", scbp);
710#endif
711 scbp->status = SCB_PEND;
712 scbp->next = NULL;
713 if (host->last_pending != NULL) {
714 host->last_pending->next = scbp;
715 host->last_pending = scbp;
716 } else {
717 host->first_pending = scbp;
718 host->last_pending = scbp;
719 }
720}
721
722/***************************************************************************/
723static void initio_push_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
724{
725
726#if DEBUG_QUEUE
727 printk("Push pend SCB %p; ", scbp);
728#endif
729 scbp->status = SCB_PEND;
730 if ((scbp->next = host->first_pending) != NULL) {
731 host->first_pending = scbp;
732 } else {
733 host->first_pending = scbp;
734 host->last_pending = scbp;
735 }
736}
737
738static struct scsi_ctrl_blk *initio_find_first_pend_scb(struct initio_host * host)
739{
740 struct scsi_ctrl_blk *first;
741
742
743 first = host->first_pending;
744 while (first != NULL) {
745 if (first->opcode != ExecSCSI)
746 return first;
747 if (first->tagmsg == 0) {
748 if ((host->act_tags[first->target] == 0) &&
749 !(host->targets[first->target].flags & TCF_BUSY))
750 return first;
751 } else {
752 if ((host->act_tags[first->target] >=
753 host->max_tags[first->target]) |
754 (host->targets[first->target].flags & TCF_BUSY)) {
755 first = first->next;
756 continue;
757 }
758 return first;
759 }
760 first = first->next;
761 }
762 return first;
763}
764
765static void initio_unlink_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
766{
767 struct scsi_ctrl_blk *tmp, *prev;
768
769#if DEBUG_QUEUE
770 printk("unlink pend SCB %p; ", scb);
771#endif
772
773 prev = tmp = host->first_pending;
774 while (tmp != NULL) {
775 if (scb == tmp) { /* Unlink this SCB */
776 if (tmp == host->first_pending) {
777 if ((host->first_pending = tmp->next) == NULL)
778 host->last_pending = NULL;
779 } else {
780 prev->next = tmp->next;
781 if (tmp == host->last_pending)
782 host->last_pending = prev;
783 }
784 tmp->next = NULL;
785 break;
786 }
787 prev = tmp;
788 tmp = tmp->next;
789 }
790}
791
792static void initio_append_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
793{
794
795#if DEBUG_QUEUE
796 printk("append busy SCB %p; ", scbp);
797#endif
798 if (scbp->tagmsg)
799 host->act_tags[scbp->target]++;
800 else
801 host->targets[scbp->target].flags |= TCF_BUSY;
802 scbp->status = SCB_BUSY;
803 scbp->next = NULL;
804 if (host->last_busy != NULL) {
805 host->last_busy->next = scbp;
806 host->last_busy = scbp;
807 } else {
808 host->first_busy = scbp;
809 host->last_busy = scbp;
810 }
811}
812
813/***************************************************************************/
814static struct scsi_ctrl_blk *initio_pop_busy_scb(struct initio_host * host)
815{
816 struct scsi_ctrl_blk *tmp;
817
818
819 if ((tmp = host->first_busy) != NULL) {
820 if ((host->first_busy = tmp->next) == NULL)
821 host->last_busy = NULL;
822 tmp->next = NULL;
823 if (tmp->tagmsg)
824 host->act_tags[tmp->target]--;
825 else
826 host->targets[tmp->target].flags &= ~TCF_BUSY;
827 }
828#if DEBUG_QUEUE
829 printk("Pop busy SCB %p; ", tmp);
830#endif
831 return tmp;
832}
833
834/***************************************************************************/
835static void initio_unlink_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
836{
837 struct scsi_ctrl_blk *tmp, *prev;
838
839#if DEBUG_QUEUE
840 printk("unlink busy SCB %p; ", scb);
841#endif
842
843 prev = tmp = host->first_busy;
844 while (tmp != NULL) {
845 if (scb == tmp) { /* Unlink this SCB */
846 if (tmp == host->first_busy) {
847 if ((host->first_busy = tmp->next) == NULL)
848 host->last_busy = NULL;
849 } else {
850 prev->next = tmp->next;
851 if (tmp == host->last_busy)
852 host->last_busy = prev;
853 }
854 tmp->next = NULL;
855 if (tmp->tagmsg)
856 host->act_tags[tmp->target]--;
857 else
858 host->targets[tmp->target].flags &= ~TCF_BUSY;
859 break;
860 }
861 prev = tmp;
862 tmp = tmp->next;
863 }
864 return;
865}
866
867struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun)
868{
869 struct scsi_ctrl_blk *tmp, *prev;
870 u16 scbp_tarlun;
871
872
873 prev = tmp = host->first_busy;
874 while (tmp != NULL) {
875 scbp_tarlun = (tmp->lun << 8) | (tmp->target);
876 if (scbp_tarlun == tarlun) { /* Unlink this SCB */
877 break;
878 }
879 prev = tmp;
880 tmp = tmp->next;
881 }
882#if DEBUG_QUEUE
883 printk("find busy SCB %p; ", tmp);
884#endif
885 return tmp;
886}
887
888static void initio_append_done_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
889{
890#if DEBUG_QUEUE
891 printk("append done SCB %p; ", scbp);
892#endif
893
894 scbp->status = SCB_DONE;
895 scbp->next = NULL;
896 if (host->last_done != NULL) {
897 host->last_done->next = scbp;
898 host->last_done = scbp;
899 } else {
900 host->first_done = scbp;
901 host->last_done = scbp;
902 }
903}
904
905struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host)
906{
907 struct scsi_ctrl_blk *tmp;
908
909 if ((tmp = host->first_done) != NULL) {
910 if ((host->first_done = tmp->next) == NULL)
911 host->last_done = NULL;
912 tmp->next = NULL;
913 }
914#if DEBUG_QUEUE
915 printk("find done SCB %p; ",tmp);
916#endif
917 return tmp;
918}
919
920static int initio_abort_srb(struct initio_host * host, struct scsi_cmnd *srbp)
921{
922 unsigned long flags;
923 struct scsi_ctrl_blk *tmp, *prev;
924
925 spin_lock_irqsave(&host->semaph_lock, flags);
926
927 if ((host->semaph == 0) && (host->active == NULL)) {
928 /* disable Jasmin SCSI Int */
929 outb(0x1F, host->addr + TUL_Mask);
930 spin_unlock_irqrestore(&host->semaph_lock, flags);
931 /* FIXME: synchronize_irq needed ? */
932 tulip_main(host);
933 spin_lock_irqsave(&host->semaph_lock, flags);
934 host->semaph = 1;
935 outb(0x0F, host->addr + TUL_Mask);
936 spin_unlock_irqrestore(&host->semaph_lock, flags);
937 return SCSI_ABORT_SNOOZE;
938 }
939 prev = tmp = host->first_pending; /* Check Pend queue */
940 while (tmp != NULL) {
941 /* 07/27/98 */
942 if (tmp->srb == srbp) {
943 if (tmp == host->active) {
944 spin_unlock_irqrestore(&host->semaph_lock, flags);
945 return SCSI_ABORT_BUSY;
946 } else if (tmp == host->first_pending) {
947 if ((host->first_pending = tmp->next) == NULL)
948 host->last_pending = NULL;
949 } else {
950 prev->next = tmp->next;
951 if (tmp == host->last_pending)
952 host->last_pending = prev;
953 }
954 tmp->hastat = HOST_ABORTED;
955 tmp->flags |= SCF_DONE;
956 if (tmp->flags & SCF_POST)
957 (*tmp->post) ((u8 *) host, (u8 *) tmp);
958 spin_unlock_irqrestore(&host->semaph_lock, flags);
959 return SCSI_ABORT_SUCCESS;
960 }
961 prev = tmp;
962 tmp = tmp->next;
963 }
964
965 prev = tmp = host->first_busy; /* Check Busy queue */
966 while (tmp != NULL) {
967 if (tmp->srb == srbp) {
968 if (tmp == host->active) {
969 spin_unlock_irqrestore(&host->semaph_lock, flags);
970 return SCSI_ABORT_BUSY;
971 } else if (tmp->tagmsg == 0) {
972 spin_unlock_irqrestore(&host->semaph_lock, flags);
973 return SCSI_ABORT_BUSY;
974 } else {
975 host->act_tags[tmp->target]--;
976 if (tmp == host->first_busy) {
977 if ((host->first_busy = tmp->next) == NULL)
978 host->last_busy = NULL;
979 } else {
980 prev->next = tmp->next;
981 if (tmp == host->last_busy)
982 host->last_busy = prev;
983 }
984 tmp->next = NULL;
985
986
987 tmp->hastat = HOST_ABORTED;
988 tmp->flags |= SCF_DONE;
989 if (tmp->flags & SCF_POST)
990 (*tmp->post) ((u8 *) host, (u8 *) tmp);
991 spin_unlock_irqrestore(&host->semaph_lock, flags);
992 return SCSI_ABORT_SUCCESS;
993 }
994 }
995 prev = tmp;
996 tmp = tmp->next;
997 }
998 spin_unlock_irqrestore(&host->semaph_lock, flags);
999 return SCSI_ABORT_NOT_RUNNING;
1000}
1001
1002/***************************************************************************/
1003static int initio_bad_seq(struct initio_host * host)
1004{
1005 struct scsi_ctrl_blk *scb;
1006
1007 printk("initio_bad_seg c=%d\n", host->index);
1008
1009 if ((scb = host->active) != NULL) {
1010 initio_unlink_busy_scb(host, scb);
1011 scb->hastat = HOST_BAD_PHAS;
1012 scb->tastat = 0;
1013 initio_append_done_scb(host, scb);
1014 }
1015 initio_stop_bm(host);
1016 initio_reset_scsi(host, 8); /* 7/29/98 */
1017 return initio_post_scsi_rst(host);
1018}
1019
1020
1021/************************************************************************/
1022static void initio_exec_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
1023{
1024 unsigned long flags;
1025
1026 scb->mode = 0;
1027
1028 scb->sgidx = 0;
1029 scb->sgmax = scb->sglen;
1030
1031 spin_lock_irqsave(&host->semaph_lock, flags);
1032
1033 initio_append_pend_scb(host, scb); /* Append this SCB to Pending queue */
1034
1035/* VVVVV 07/21/98 */
1036 if (host->semaph == 1) {
1037 /* Disable Jasmin SCSI Int */
1038 outb(0x1F, host->addr + TUL_Mask);
1039 host->semaph = 0;
1040 spin_unlock_irqrestore(&host->semaph_lock, flags);
1041
1042 tulip_main(host);
1043
1044 spin_lock_irqsave(&host->semaph_lock, flags);
1045 host->semaph = 1;
1046 outb(0x0F, host->addr + TUL_Mask);
1047 }
1048 spin_unlock_irqrestore(&host->semaph_lock, flags);
1049 return;
1050}
1051
1052/***************************************************************************/
1053static int initio_isr(struct initio_host * host)
1054{
1055 if (inb(host->addr + TUL_Int) & TSS_INT_PENDING) {
1056 if (host->semaph == 1) {
1057 outb(0x1F, host->addr + TUL_Mask);
1058 /* Disable Tulip SCSI Int */
1059 host->semaph = 0;
1060
1061 tulip_main(host);
1062
1063 host->semaph = 1;
1064 outb(0x0F, host->addr + TUL_Mask);
1065 return 1;
1066 }
1067 }
1068 return 0;
1069}
1070
1071static int tulip_main(struct initio_host * host)
1072{
1073 struct scsi_ctrl_blk *scb;
1074
1075 for (;;) {
1076 tulip_scsi(host); /* Call tulip_scsi */
1077
1078 /* Walk the list of completed SCBs */
1079 while ((scb = initio_find_done_scb(host)) != NULL) { /* find done entry */
1080 if (scb->tastat == INI_QUEUE_FULL) {
1081 host->max_tags[scb->target] =
1082 host->act_tags[scb->target] - 1;
1083 scb->tastat = 0;
1084 initio_append_pend_scb(host, scb);
1085 continue;
1086 }
1087 if (!(scb->mode & SCM_RSENS)) { /* not in auto req. sense mode */
1088 if (scb->tastat == 2) {
1089
1090 /* clr sync. nego flag */
1091
1092 if (scb->flags & SCF_SENSE) {
1093 u8 len;
1094 len = scb->senselen;
1095 if (len == 0)
1096 len = 1;
1097 scb->buflen = scb->senselen;
1098 scb->bufptr = scb->senseptr;
1099 scb->flags &= ~(SCF_SG | SCF_DIR); /* for xfer_data_in */
1100 /* so, we won't report wrong direction in xfer_data_in,
1101 and won't report HOST_DO_DU in state_6 */
1102 scb->mode = SCM_RSENS;
1103 scb->ident &= 0xBF; /* Disable Disconnect */
1104 scb->tagmsg = 0;
1105 scb->tastat = 0;
1106 scb->cdblen = 6;
1107 scb->cdb[0] = SCSICMD_RequestSense;
1108 scb->cdb[1] = 0;
1109 scb->cdb[2] = 0;
1110 scb->cdb[3] = 0;
1111 scb->cdb[4] = len;
1112 scb->cdb[5] = 0;
1113 initio_push_pend_scb(host, scb);
1114 break;
1115 }
1116 }
1117 } else { /* in request sense mode */
1118
1119 if (scb->tastat == 2) { /* check contition status again after sending
1120 requset sense cmd 0x3 */
1121 scb->hastat = HOST_BAD_PHAS;
1122 }
1123 scb->tastat = 2;
1124 }
1125 scb->flags |= SCF_DONE;
1126 if (scb->flags & SCF_POST) {
1127 /* FIXME: only one post method and lose casts */
1128 (*scb->post) ((u8 *) host, (u8 *) scb);
1129 }
1130 } /* while */
1131 /* find_active: */
1132 if (inb(host->addr + TUL_SStatus0) & TSS_INT_PENDING)
1133 continue;
1134 if (host->active) /* return to OS and wait for xfer_done_ISR/Selected_ISR */
1135 return 1; /* return to OS, enable interrupt */
1136 /* Check pending SCB */
1137 if (initio_find_first_pend_scb(host) == NULL)
1138 return 1; /* return to OS, enable interrupt */
1139 } /* End of for loop */
1140 /* statement won't reach here */
1141}
1142
1143static void tulip_scsi(struct initio_host * host)
1144{
1145 struct scsi_ctrl_blk *scb;
1146 struct target_control *active_tc;
1147
1148 /* make sure to service interrupt asap */
1149 if ((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING) {
1150 host->phase = host->jsstatus0 & TSS_PH_MASK;
1151 host->jsstatus1 = inb(host->addr + TUL_SStatus1);
1152 host->jsint = inb(host->addr + TUL_SInt);
1153 if (host->jsint & TSS_SCSIRST_INT) { /* SCSI bus reset detected */
1154 int_initio_scsi_rst(host);
1155 return;
1156 }
1157 if (host->jsint & TSS_RESEL_INT) { /* if selected/reselected interrupt */
1158 if (int_initio_resel(host) == 0)
1159 initio_next_state(host);
1160 return;
1161 }
1162 if (host->jsint & TSS_SEL_TIMEOUT) {
1163 int_initio_busfree(host);
1164 return;
1165 }
1166 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
1167 int_initio_busfree(host); /* unexpected bus free or sel timeout */
1168 return;
1169 }
1170 if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) { /* func complete or Bus service */
1171 if ((scb = host->active) != NULL)
1172 initio_next_state(host);
1173 return;
1174 }
1175 }
1176 if (host->active != NULL)
1177 return;
1178
1179 if ((scb = initio_find_first_pend_scb(host)) == NULL)
1180 return;
1181
1182 /* program HBA's SCSI ID & target SCSI ID */
1183 outb((host->scsi_id << 4) | (scb->target & 0x0F),
1184 host->addr + TUL_SScsiId);
1185 if (scb->opcode == ExecSCSI) {
1186 active_tc = &host->targets[scb->target];
1187
1188 if (scb->tagmsg)
1189 active_tc->drv_flags |= TCF_DRV_EN_TAG;
1190 else
1191 active_tc->drv_flags &= ~TCF_DRV_EN_TAG;
1192
1193 outb(active_tc->js_period, host->addr + TUL_SPeriod);
1194 if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) { /* do wdtr negotiation */
1195 initio_select_atn_stop(host, scb);
1196 } else {
1197 if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) { /* do sync negotiation */
1198 initio_select_atn_stop(host, scb);
1199 } else {
1200 if (scb->tagmsg)
1201 initio_select_atn3(host, scb);
1202 else
1203 initio_select_atn(host, scb);
1204 }
1205 }
1206 if (scb->flags & SCF_POLL) {
1207 while (wait_tulip(host) != -1) {
1208 if (initio_next_state(host) == -1)
1209 break;
1210 }
1211 }
1212 } else if (scb->opcode == BusDevRst) {
1213 initio_select_atn_stop(host, scb);
1214 scb->next_state = 8;
1215 if (scb->flags & SCF_POLL) {
1216 while (wait_tulip(host) != -1) {
1217 if (initio_next_state(host) == -1)
1218 break;
1219 }
1220 }
1221 } else if (scb->opcode == AbortCmd) {
1222 if (initio_abort_srb(host, scb->srb) != 0) {
1223 initio_unlink_pend_scb(host, scb);
1224 initio_release_scb(host, scb);
1225 } else {
1226 scb->opcode = BusDevRst;
1227 initio_select_atn_stop(host, scb);
1228 scb->next_state = 8;
1229 }
1230 } else {
1231 initio_unlink_pend_scb(host, scb);
1232 scb->hastat = 0x16; /* bad command */
1233 initio_append_done_scb(host, scb);
1234 }
1235 return;
1236}
1237
1238/**
1239 * initio_next_state - Next SCSI state
1240 * @host: InitIO host we are processing
1241 *
1242 * Progress the active command block along the state machine
1243 * until we hit a state which we must wait for activity to occur.
1244 *
1245 * Returns zero or a negative code.
1246 */
1247
1248static int initio_next_state(struct initio_host * host)
1249{
1250 int next;
1251
1252 next = host->active->next_state;
1253 for (;;) {
1254 switch (next) {
1255 case 1:
1256 next = initio_state_1(host);
1257 break;
1258 case 2:
1259 next = initio_state_2(host);
1260 break;
1261 case 3:
1262 next = initio_state_3(host);
1263 break;
1264 case 4:
1265 next = initio_state_4(host);
1266 break;
1267 case 5:
1268 next = initio_state_5(host);
1269 break;
1270 case 6:
1271 next = initio_state_6(host);
1272 break;
1273 case 7:
1274 next = initio_state_7(host);
1275 break;
1276 case 8:
1277 return initio_bus_device_reset(host);
1278 default:
1279 return initio_bad_seq(host);
1280 }
1281 if (next <= 0)
1282 return next;
1283 }
1284}
1285
1286
1287/**
1288 * initio_state_1 - SCSI state machine
1289 * @host: InitIO host we are controlling
1290 *
1291 * Perform SCSI state processing for Select/Attention/Stop
1292 */
1293
1294static int initio_state_1(struct initio_host * host)
1295{
1296 struct scsi_ctrl_blk *scb = host->active;
1297 struct target_control *active_tc = host->active_tc;
1298#if DEBUG_STATE
1299 printk("-s1-");
1300#endif
1301
1302 /* Move the SCB from pending to busy */
1303 initio_unlink_pend_scb(host, scb);
1304 initio_append_busy_scb(host, scb);
1305
1306 outb(active_tc->sconfig0, host->addr + TUL_SConfig );
1307 /* ATN on */
1308 if (host->phase == MSG_OUT) {
1309 outb(TSC_EN_BUS_IN | TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
1310 outb(scb->ident, host->addr + TUL_SFifo);
1311
1312 if (scb->tagmsg) {
1313 outb(scb->tagmsg, host->addr + TUL_SFifo);
1314 outb(scb->tagid, host->addr + TUL_SFifo);
1315 }
1316 if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) {
1317 active_tc->flags |= TCF_WDTR_DONE;
1318 outb(MSG_EXTEND, host->addr + TUL_SFifo);
1319 outb(2, host->addr + TUL_SFifo); /* Extended msg length */
1320 outb(3, host->addr + TUL_SFifo); /* Sync request */
1321 outb(1, host->addr + TUL_SFifo); /* Start from 16 bits */
1322 } else if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) {
1323 active_tc->flags |= TCF_SYNC_DONE;
1324 outb(MSG_EXTEND, host->addr + TUL_SFifo);
1325 outb(3, host->addr + TUL_SFifo); /* extended msg length */
1326 outb(1, host->addr + TUL_SFifo); /* sync request */
1327 outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo);
1328 outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */
1329 }
1330 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1331 if (wait_tulip(host) == -1)
1332 return -1;
1333 }
1334 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1335 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal);
1336 /* Into before CDB xfer */
1337 return 3;
1338}
1339
1340
1341/**
1342 * initio_state_2 - SCSI state machine
1343 * @host: InitIO host we are controlling
1344 *
1345 * state after selection with attention
1346 * state after selection with attention3
1347 */
1348
1349static int initio_state_2(struct initio_host * host)
1350{
1351 struct scsi_ctrl_blk *scb = host->active;
1352 struct target_control *active_tc = host->active_tc;
1353#if DEBUG_STATE
1354 printk("-s2-");
1355#endif
1356
1357 initio_unlink_pend_scb(host, scb);
1358 initio_append_busy_scb(host, scb);
1359
1360 outb(active_tc->sconfig0, host->addr + TUL_SConfig);
1361
1362 if (host->jsstatus1 & TSS_CMD_PH_CMP)
1363 return 4;
1364
1365 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1366 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal);
1367 /* Into before CDB xfer */
1368 return 3;
1369}
1370
1371/**
1372 * initio_state_3 - SCSI state machine
1373 * @host: InitIO host we are controlling
1374 *
1375 * state before CDB xfer is done
1376 */
1377
1378static int initio_state_3(struct initio_host * host)
1379{
1380 struct scsi_ctrl_blk *scb = host->active;
1381 struct target_control *active_tc = host->active_tc;
1382 int i;
1383
1384#if DEBUG_STATE
1385 printk("-s3-");
1386#endif
1387 for (;;) {
1388 switch (host->phase) {
1389 case CMD_OUT: /* Command out phase */
1390 for (i = 0; i < (int) scb->cdblen; i++)
1391 outb(scb->cdb[i], host->addr + TUL_SFifo);
1392 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1393 if (wait_tulip(host) == -1)
1394 return -1;
1395 if (host->phase == CMD_OUT)
1396 return initio_bad_seq(host);
1397 return 4;
1398
1399 case MSG_IN: /* Message in phase */
1400 scb->next_state = 3;
1401 if (initio_msgin(host) == -1)
1402 return -1;
1403 break;
1404
1405 case STATUS_IN: /* Status phase */
1406 if (initio_status_msg(host) == -1)
1407 return -1;
1408 break;
1409
1410 case MSG_OUT: /* Message out phase */
1411 if (active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) {
1412 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */
1413 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1414 if (wait_tulip(host) == -1)
1415 return -1;
1416 } else {
1417 active_tc->flags |= TCF_SYNC_DONE;
1418
1419 outb(MSG_EXTEND, host->addr + TUL_SFifo);
1420 outb(3, host->addr + TUL_SFifo); /* ext. msg len */
1421 outb(1, host->addr + TUL_SFifo); /* sync request */
1422 outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo);
1423 outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */
1424 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1425 if (wait_tulip(host) == -1)
1426 return -1;
1427 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1428 outb(inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7), host->addr + TUL_SSignal);
1429
1430 }
1431 break;
1432 default:
1433 return initio_bad_seq(host);
1434 }
1435 }
1436}
1437
1438/**
1439 * initio_state_4 - SCSI state machine
1440 * @host: InitIO host we are controlling
1441 *
1442 * SCSI state machine. State 4
1443 */
1444
1445static int initio_state_4(struct initio_host * host)
1446{
1447 struct scsi_ctrl_blk *scb = host->active;
1448
1449#if DEBUG_STATE
1450 printk("-s4-");
1451#endif
1452 if ((scb->flags & SCF_DIR) == SCF_NO_XF) {
1453 return 6; /* Go to state 6 (After data) */
1454 }
1455 for (;;) {
1456 if (scb->buflen == 0)
1457 return 6;
1458
1459 switch (host->phase) {
1460
1461 case STATUS_IN: /* Status phase */
1462 if ((scb->flags & SCF_DIR) != 0) /* if direction bit set then report data underrun */
1463 scb->hastat = HOST_DO_DU;
1464 if ((initio_status_msg(host)) == -1)
1465 return -1;
1466 break;
1467
1468 case MSG_IN: /* Message in phase */
1469 scb->next_state = 0x4;
1470 if (initio_msgin(host) == -1)
1471 return -1;
1472 break;
1473
1474 case MSG_OUT: /* Message out phase */
1475 if (host->jsstatus0 & TSS_PAR_ERROR) {
1476 scb->buflen = 0;
1477 scb->hastat = HOST_DO_DU;
1478 if (initio_msgout_ide(host) == -1)
1479 return -1;
1480 return 6;
1481 } else {
1482 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */
1483 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1484 if (wait_tulip(host) == -1)
1485 return -1;
1486 }
1487 break;
1488
1489 case DATA_IN: /* Data in phase */
1490 return initio_xfer_data_in(host);
1491
1492 case DATA_OUT: /* Data out phase */
1493 return initio_xfer_data_out(host);
1494
1495 default:
1496 return initio_bad_seq(host);
1497 }
1498 }
1499}
1500
1501
1502/**
1503 * initio_state_5 - SCSI state machine
1504 * @host: InitIO host we are controlling
1505 *
1506 * State after dma xfer done or phase change before xfer done
1507 */
1508
1509static int initio_state_5(struct initio_host * host)
1510{
1511 struct scsi_ctrl_blk *scb = host->active;
1512 long cnt, xcnt; /* cannot use unsigned !! code: if (xcnt < 0) */
1513
1514#if DEBUG_STATE
1515 printk("-s5-");
1516#endif
1517 /*------ get remaining count -------*/
1518 cnt = inl(host->addr + TUL_SCnt0) & 0x0FFFFFF;
1519
1520 if (inb(host->addr + TUL_XCmd) & 0x20) {
1521 /* ----------------------- DATA_IN ----------------------------- */
1522 /* check scsi parity error */
1523 if (host->jsstatus0 & TSS_PAR_ERROR)
1524 scb->hastat = HOST_DO_DU;
1525 if (inb(host->addr + TUL_XStatus) & XPEND) { /* DMA xfer pending, Send STOP */
1526 /* tell Hardware scsi xfer has been terminated */
1527 outb(inb(host->addr + TUL_XCtrl) | 0x80, host->addr + TUL_XCtrl);
1528 /* wait until DMA xfer not pending */
1529 while (inb(host->addr + TUL_XStatus) & XPEND)
1530 cpu_relax();
1531 }
1532 } else {
1533 /*-------- DATA OUT -----------*/
1534 if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) {
1535 if (host->active_tc->js_period & TSC_WIDE_SCSI)
1536 cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F) << 1;
1537 else
1538 cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F);
1539 }
1540 if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */
1541 outb(TAX_X_ABT, host->addr + TUL_XCmd);
1542 /* wait Abort DMA xfer done */
1543 while ((inb(host->addr + TUL_Int) & XABT) == 0)
1544 cpu_relax();
1545 }
1546 if ((cnt == 1) && (host->phase == DATA_OUT)) {
1547 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1548 if (wait_tulip(host) == -1)
1549 return -1;
1550 cnt = 0;
1551 } else {
1552 if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0)
1553 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1554 }
1555 }
1556 if (cnt == 0) {
1557 scb->buflen = 0;
1558 return 6; /* After Data */
1559 }
1560 /* Update active data pointer */
1561 xcnt = (long) scb->buflen - cnt; /* xcnt== bytes already xferred */
1562 scb->buflen = (u32) cnt; /* cnt == bytes left to be xferred */
1563 if (scb->flags & SCF_SG) {
1564 struct sg_entry *sgp;
1565 unsigned long i;
1566
1567 sgp = &scb->sglist[scb->sgidx];
1568 for (i = scb->sgidx; i < scb->sgmax; sgp++, i++) {
1569 xcnt -= (long) sgp->len;
1570 if (xcnt < 0) { /* this sgp xfer half done */
1571 xcnt += (long) sgp->len; /* xcnt == bytes xferred in this sgp */
1572 sgp->data += (u32) xcnt; /* new ptr to be xfer */
1573 sgp->len -= (u32) xcnt; /* new len to be xfer */
1574 scb->bufptr += ((u32) (i - scb->sgidx) << 3);
1575 /* new SG table ptr */
1576 scb->sglen = (u8) (scb->sgmax - i);
1577 /* new SG table len */
1578 scb->sgidx = (u16) i;
1579 /* for next disc and come in this loop */
1580 return 4; /* Go to state 4 */
1581 }
1582 /* else (xcnt >= 0 , i.e. this sgp already xferred */
1583 } /* for */
1584 return 6; /* Go to state 6 */
1585 } else {
1586 scb->bufptr += (u32) xcnt;
1587 }
1588 return 4; /* Go to state 4 */
1589}
1590
1591/**
1592 * initio_state_6 - SCSI state machine
1593 * @host: InitIO host we are controlling
1594 *
1595 * State after Data phase
1596 */
1597
1598static int initio_state_6(struct initio_host * host)
1599{
1600 struct scsi_ctrl_blk *scb = host->active;
1601
1602#if DEBUG_STATE
1603 printk("-s6-");
1604#endif
1605 for (;;) {
1606 switch (host->phase) {
1607 case STATUS_IN: /* Status phase */
1608 if ((initio_status_msg(host)) == -1)
1609 return -1;
1610 break;
1611
1612 case MSG_IN: /* Message in phase */
1613 scb->next_state = 6;
1614 if ((initio_msgin(host)) == -1)
1615 return -1;
1616 break;
1617
1618 case MSG_OUT: /* Message out phase */
1619 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */
1620 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1621 if (wait_tulip(host) == -1)
1622 return -1;
1623 break;
1624
1625 case DATA_IN: /* Data in phase */
1626 return initio_xpad_in(host);
1627
1628 case DATA_OUT: /* Data out phase */
1629 return initio_xpad_out(host);
1630
1631 default:
1632 return initio_bad_seq(host);
1633 }
1634 }
1635}
1636
1637/**
1638 * initio_state_7 - SCSI state machine
1639 * @host: InitIO host we are controlling
1640 *
1641 */
1642
1643static int initio_state_7(struct initio_host * host)
1644{
1645 int cnt, i;
1646
1647#if DEBUG_STATE
1648 printk("-s7-");
1649#endif
1650 /* flush SCSI FIFO */
1651 cnt = inb(host->addr + TUL_SFifoCnt) & 0x1F;
1652 if (cnt) {
1653 for (i = 0; i < cnt; i++)
1654 inb(host->addr + TUL_SFifo);
1655 }
1656 switch (host->phase) {
1657 case DATA_IN: /* Data in phase */
1658 case DATA_OUT: /* Data out phase */
1659 return initio_bad_seq(host);
1660 default:
1661 return 6; /* Go to state 6 */
1662 }
1663}
1664
1665/**
1666 * initio_xfer_data_in - Commence data input
1667 * @host: InitIO host in use
1668 *
1669 * Commence a block of data transfer. The transfer itself will
1670 * be managed by the controller and we will get a completion (or
1671 * failure) interrupt.
1672 */
1673static int initio_xfer_data_in(struct initio_host * host)
1674{
1675 struct scsi_ctrl_blk *scb = host->active;
1676
1677 if ((scb->flags & SCF_DIR) == SCF_DOUT)
1678 return 6; /* wrong direction */
1679
1680 outl(scb->buflen, host->addr + TUL_SCnt0);
1681 outb(TSC_XF_DMA_IN, host->addr + TUL_SCmd); /* 7/25/95 */
1682
1683 if (scb->flags & SCF_SG) { /* S/G xfer */
1684 outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH);
1685 outl(scb->bufptr, host->addr + TUL_XAddH);
1686 outb(TAX_SG_IN, host->addr + TUL_XCmd);
1687 } else {
1688 outl(scb->buflen, host->addr + TUL_XCntH);
1689 outl(scb->bufptr, host->addr + TUL_XAddH);
1690 outb(TAX_X_IN, host->addr + TUL_XCmd);
1691 }
1692 scb->next_state = 0x5;
1693 return 0; /* return to OS, wait xfer done , let jas_isr come in */
1694}
1695
1696/**
1697 * initio_xfer_data_out - Commence data output
1698 * @host: InitIO host in use
1699 *
1700 * Commence a block of data transfer. The transfer itself will
1701 * be managed by the controller and we will get a completion (or
1702 * failure) interrupt.
1703 */
1704
1705static int initio_xfer_data_out(struct initio_host * host)
1706{
1707 struct scsi_ctrl_blk *scb = host->active;
1708
1709 if ((scb->flags & SCF_DIR) == SCF_DIN)
1710 return 6; /* wrong direction */
1711
1712 outl(scb->buflen, host->addr + TUL_SCnt0);
1713 outb(TSC_XF_DMA_OUT, host->addr + TUL_SCmd);
1714
1715 if (scb->flags & SCF_SG) { /* S/G xfer */
1716 outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH);
1717 outl(scb->bufptr, host->addr + TUL_XAddH);
1718 outb(TAX_SG_OUT, host->addr + TUL_XCmd);
1719 } else {
1720 outl(scb->buflen, host->addr + TUL_XCntH);
1721 outl(scb->bufptr, host->addr + TUL_XAddH);
1722 outb(TAX_X_OUT, host->addr + TUL_XCmd);
1723 }
1724
1725 scb->next_state = 0x5;
1726 return 0; /* return to OS, wait xfer done , let jas_isr come in */
1727}
1728
1729int initio_xpad_in(struct initio_host * host)
1730{
1731 struct scsi_ctrl_blk *scb = host->active;
1732 struct target_control *active_tc = host->active_tc;
1733
1734 if ((scb->flags & SCF_DIR) != SCF_NO_DCHK)
1735 scb->hastat = HOST_DO_DU; /* over run */
1736 for (;;) {
1737 if (active_tc->js_period & TSC_WIDE_SCSI)
1738 outl(2, host->addr + TUL_SCnt0);
1739 else
1740 outl(1, host->addr + TUL_SCnt0);
1741
1742 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1743 if (wait_tulip(host) == -1)
1744 return -1;
1745 if (host->phase != DATA_IN) {
1746 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1747 return 6;
1748 }
1749 inb(host->addr + TUL_SFifo);
1750 }
1751}
1752
1753int initio_xpad_out(struct initio_host * host)
1754{
1755 struct scsi_ctrl_blk *scb = host->active;
1756 struct target_control *active_tc = host->active_tc;
1757
1758 if ((scb->flags & SCF_DIR) != SCF_NO_DCHK)
1759 scb->hastat = HOST_DO_DU; /* over run */
1760 for (;;) {
1761 if (active_tc->js_period & TSC_WIDE_SCSI)
1762 outl(2, host->addr + TUL_SCnt0);
1763 else
1764 outl(1, host->addr + TUL_SCnt0);
1765
1766 outb(0, host->addr + TUL_SFifo);
1767 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1768 if ((wait_tulip(host)) == -1)
1769 return -1;
1770 if (host->phase != DATA_OUT) { /* Disable wide CPU to allow read 16 bits */
1771 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
1772 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1773 return 6;
1774 }
1775 }
1776}
1777
1778int initio_status_msg(struct initio_host * host)
1779{ /* status & MSG_IN */
1780 struct scsi_ctrl_blk *scb = host->active;
1781 u8 msg;
1782
1783 outb(TSC_CMD_COMP, host->addr + TUL_SCmd);
1784 if (wait_tulip(host) == -1)
1785 return -1;
1786
1787 /* get status */
1788 scb->tastat = inb(host->addr + TUL_SFifo);
1789
1790 if (host->phase == MSG_OUT) {
1791 if (host->jsstatus0 & TSS_PAR_ERROR)
1792 outb(MSG_PARITY, host->addr + TUL_SFifo);
1793 else
1794 outb(MSG_NOP, host->addr + TUL_SFifo);
1795 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1796 return wait_tulip(host);
1797 }
1798 if (host->phase == MSG_IN) {
1799 msg = inb(host->addr + TUL_SFifo);
1800 if (host->jsstatus0 & TSS_PAR_ERROR) { /* Parity error */
1801 if ((initio_msgin_accept(host)) == -1)
1802 return -1;
1803 if (host->phase != MSG_OUT)
1804 return initio_bad_seq(host);
1805 outb(MSG_PARITY, host->addr + TUL_SFifo);
1806 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1807 return wait_tulip(host);
1808 }
1809 if (msg == 0) { /* Command complete */
1810
1811 if ((scb->tastat & 0x18) == 0x10) /* No link support */
1812 return initio_bad_seq(host);
1813 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1814 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
1815 return initio_wait_done_disc(host);
1816
1817 }
1818 if (msg == MSG_LINK_COMP || msg == MSG_LINK_FLAG) {
1819 if ((scb->tastat & 0x18) == 0x10)
1820 return initio_msgin_accept(host);
1821 }
1822 }
1823 return initio_bad_seq(host);
1824}
1825
1826
1827/* scsi bus free */
1828int int_initio_busfree(struct initio_host * host)
1829{
1830 struct scsi_ctrl_blk *scb = host->active;
1831
1832 if (scb != NULL) {
1833 if (scb->status & SCB_SELECT) { /* selection timeout */
1834 initio_unlink_pend_scb(host, scb);
1835 scb->hastat = HOST_SEL_TOUT;
1836 initio_append_done_scb(host, scb);
1837 } else { /* Unexpected bus free */
1838 initio_unlink_busy_scb(host, scb);
1839 scb->hastat = HOST_BUS_FREE;
1840 initio_append_done_scb(host, scb);
1841 }
1842 host->active = NULL;
1843 host->active_tc = NULL;
1844 }
1845 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
1846 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
1847 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
1848 return -1;
1849}
1850
1851
1852/**
1853 * int_initio_scsi_rst - SCSI reset occurred
1854 * @host: Host seeing the reset
1855 *
1856 * A SCSI bus reset has occurred. Clean up any pending transfer
1857 * the hardware is doing by DMA and then abort all active and
1858 * disconnected commands. The mid layer should sort the rest out
1859 * for us
1860 */
1861
1862static int int_initio_scsi_rst(struct initio_host * host)
1863{
1864 struct scsi_ctrl_blk *scb;
1865 int i;
1866
1867 /* if DMA xfer is pending, abort DMA xfer */
1868 if (inb(host->addr + TUL_XStatus) & 0x01) {
1869 outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd);
1870 /* wait Abort DMA xfer done */
1871 while ((inb(host->addr + TUL_Int) & 0x04) == 0)
1872 cpu_relax();
1873 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1874 }
1875 /* Abort all active & disconnected scb */
1876 while ((scb = initio_pop_busy_scb(host)) != NULL) {
1877 scb->hastat = HOST_BAD_PHAS;
1878 initio_append_done_scb(host, scb);
1879 }
1880 host->active = NULL;
1881 host->active_tc = NULL;
1882
1883 /* clr sync nego. done flag */
1884 for (i = 0; i < host->max_tar; i++)
1885 host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
1886 return -1;
1887}
1888
1889/**
1890 * int_initio_scsi_resel - Reselection occurred
1891 * @host: InitIO host adapter
1892 *
1893 * A SCSI reselection event has been signalled and the interrupt
1894 * is now being processed. Work out which command block needs attention
1895 * and continue processing that command.
1896 */
1897
1898int int_initio_resel(struct initio_host * host)
1899{
1900 struct scsi_ctrl_blk *scb;
1901 struct target_control *active_tc;
1902 u8 tag, msg = 0;
1903 u8 tar, lun;
1904
1905 if ((scb = host->active) != NULL) {
1906 /* FIXME: Why check and not just clear ? */
1907 if (scb->status & SCB_SELECT) /* if waiting for selection complete */
1908 scb->status &= ~SCB_SELECT;
1909 host->active = NULL;
1910 }
1911 /* --------- get target id---------------------- */
1912 tar = inb(host->addr + TUL_SBusId);
1913 /* ------ get LUN from Identify message----------- */
1914 lun = inb(host->addr + TUL_SIdent) & 0x0F;
1915 /* 07/22/98 from 0x1F -> 0x0F */
1916 active_tc = &host->targets[tar];
1917 host->active_tc = active_tc;
1918 outb(active_tc->sconfig0, host->addr + TUL_SConfig);
1919 outb(active_tc->js_period, host->addr + TUL_SPeriod);
1920
1921 /* ------------- tag queueing ? ------------------- */
1922 if (active_tc->drv_flags & TCF_DRV_EN_TAG) {
1923 if ((initio_msgin_accept(host)) == -1)
1924 return -1;
1925 if (host->phase != MSG_IN)
1926 goto no_tag;
1927 outl(1, host->addr + TUL_SCnt0);
1928 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1929 if (wait_tulip(host) == -1)
1930 return -1;
1931 msg = inb(host->addr + TUL_SFifo); /* Read Tag Message */
1932
1933 if (msg < MSG_STAG || msg > MSG_OTAG) /* Is simple Tag */
1934 goto no_tag;
1935
1936 if (initio_msgin_accept(host) == -1)
1937 return -1;
1938
1939 if (host->phase != MSG_IN)
1940 goto no_tag;
1941
1942 outl(1, host->addr + TUL_SCnt0);
1943 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1944 if (wait_tulip(host) == -1)
1945 return -1;
1946 tag = inb(host->addr + TUL_SFifo); /* Read Tag ID */
1947 scb = host->scb + tag;
1948 if (scb->target != tar || scb->lun != lun) {
1949 return initio_msgout_abort_tag(host);
1950 }
1951 if (scb->status != SCB_BUSY) { /* 03/24/95 */
1952 return initio_msgout_abort_tag(host);
1953 }
1954 host->active = scb;
1955 if ((initio_msgin_accept(host)) == -1)
1956 return -1;
1957 } else { /* No tag */
1958 no_tag:
1959 if ((scb = initio_find_busy_scb(host, tar | (lun << 8))) == NULL) {
1960 return initio_msgout_abort_targ(host);
1961 }
1962 host->active = scb;
1963 if (!(active_tc->drv_flags & TCF_DRV_EN_TAG)) {
1964 if ((initio_msgin_accept(host)) == -1)
1965 return -1;
1966 }
1967 }
1968 return 0;
1969}
1970
1971/**
1972 * int_initio_bad_seq - out of phase
1973 * @host: InitIO host flagging event
1974 *
1975 * We have ended up out of phase somehow. Reset the host controller
1976 * and throw all our toys out of the pram. Let the midlayer clean up
1977 */
1978
1979static int int_initio_bad_seq(struct initio_host * host)
1980{ /* target wrong phase */
1981 struct scsi_ctrl_blk *scb;
1982 int i;
1983
1984 initio_reset_scsi(host, 10);
1985
1986 while ((scb = initio_pop_busy_scb(host)) != NULL) {
1987 scb->hastat = HOST_BAD_PHAS;
1988 initio_append_done_scb(host, scb);
1989 }
1990 for (i = 0; i < host->max_tar; i++)
1991 host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
1992 return -1;
1993}
1994
1995
1996/**
1997 * initio_msgout_abort_targ - abort a tag
1998 * @host: InitIO host
1999 *
2000 * Abort when the target/lun does not match or when our SCB is not
2001 * busy. Used by untagged commands.
2002 */
2003
2004static int initio_msgout_abort_targ(struct initio_host * host)
2005{
2006
2007 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2008 if (initio_msgin_accept(host) == -1)
2009 return -1;
2010 if (host->phase != MSG_OUT)
2011 return initio_bad_seq(host);
2012
2013 outb(MSG_ABORT, host->addr + TUL_SFifo);
2014 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2015
2016 return initio_wait_disc(host);
2017}
2018
2019/**
2020 * initio_msgout_abort_tag - abort a tag
2021 * @host: InitIO host
2022 *
2023 * Abort when the target/lun does not match or when our SCB is not
2024 * busy. Used for tagged commands.
2025 */
2026
2027static int initio_msgout_abort_tag(struct initio_host * host)
2028{
2029
2030 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2031 if (initio_msgin_accept(host) == -1)
2032 return -1;
2033 if (host->phase != MSG_OUT)
2034 return initio_bad_seq(host);
2035
2036 outb(MSG_ABORT_TAG, host->addr + TUL_SFifo);
2037 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2038
2039 return initio_wait_disc(host);
2040
2041}
2042
2043/**
2044 * initio_msgin - Message in
2045 * @host: InitIO Host
2046 *
2047 * Process incoming message
2048 */
2049static int initio_msgin(struct initio_host * host)
2050{
2051 struct target_control *active_tc;
2052
2053 for (;;) {
2054 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2055
2056 outl(1, host->addr + TUL_SCnt0);
2057 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2058 if (wait_tulip(host) == -1)
2059 return -1;
2060
2061 switch (inb(host->addr + TUL_SFifo)) {
2062 case MSG_DISC: /* Disconnect msg */
2063 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2064 return initio_wait_disc(host);
2065 case MSG_SDP:
2066 case MSG_RESTORE:
2067 case MSG_NOP:
2068 initio_msgin_accept(host);
2069 break;
2070 case MSG_REJ: /* Clear ATN first */
2071 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)),
2072 host->addr + TUL_SSignal);
2073 active_tc = host->active_tc;
2074 if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) /* do sync nego */
2075 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN),
2076 host->addr + TUL_SSignal);
2077 initio_msgin_accept(host);
2078 break;
2079 case MSG_EXTEND: /* extended msg */
2080 initio_msgin_extend(host);
2081 break;
2082 case MSG_IGNOREWIDE:
2083 initio_msgin_accept(host);
2084 break;
2085 case MSG_COMP:
2086 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2087 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2088 return initio_wait_done_disc(host);
2089 default:
2090 initio_msgout_reject(host);
2091 break;
2092 }
2093 if (host->phase != MSG_IN)
2094 return host->phase;
2095 }
2096 /* statement won't reach here */
2097}
2098
2099static int initio_msgout_reject(struct initio_host * host)
2100{
2101 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2102
2103 if (initio_msgin_accept(host) == -1)
2104 return -1;
2105
2106 if (host->phase == MSG_OUT) {
2107 outb(MSG_REJ, host->addr + TUL_SFifo); /* Msg reject */
2108 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2109 return wait_tulip(host);
2110 }
2111 return host->phase;
2112}
2113
2114static int initio_msgout_ide(struct initio_host * host)
2115{
2116 outb(MSG_IDE, host->addr + TUL_SFifo); /* Initiator Detected Error */
2117 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2118 return wait_tulip(host);
2119}
2120
2121static int initio_msgin_extend(struct initio_host * host)
2122{
2123 u8 len, idx;
2124
2125 if (initio_msgin_accept(host) != MSG_IN)
2126 return host->phase;
2127
2128 /* Get extended msg length */
2129 outl(1, host->addr + TUL_SCnt0);
2130 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2131 if (wait_tulip(host) == -1)
2132 return -1;
2133
2134 len = inb(host->addr + TUL_SFifo);
2135 host->msg[0] = len;
2136 for (idx = 1; len != 0; len--) {
2137
2138 if ((initio_msgin_accept(host)) != MSG_IN)
2139 return host->phase;
2140 outl(1, host->addr + TUL_SCnt0);
2141 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2142 if (wait_tulip(host) == -1)
2143 return -1;
2144 host->msg[idx++] = inb(host->addr + TUL_SFifo);
2145 }
2146 if (host->msg[1] == 1) { /* if it's synchronous data transfer request */
2147 u8 r;
2148 if (host->msg[0] != 3) /* if length is not right */
2149 return initio_msgout_reject(host);
2150 if (host->active_tc->flags & TCF_NO_SYNC_NEGO) { /* Set OFFSET=0 to do async, nego back */
2151 host->msg[3] = 0;
2152 } else {
2153 if (initio_msgin_sync(host) == 0 &&
2154 (host->active_tc->flags & TCF_SYNC_DONE)) {
2155 initio_sync_done(host);
2156 return initio_msgin_accept(host);
2157 }
2158 }
2159
2160 r = inb(host->addr + TUL_SSignal);
2161 outb((r & (TSC_SET_ACK | 7)) | TSC_SET_ATN,
2162 host->addr + TUL_SSignal);
2163 if (initio_msgin_accept(host) != MSG_OUT)
2164 return host->phase;
2165 /* sync msg out */
2166 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2167
2168 initio_sync_done(host);
2169
2170 outb(MSG_EXTEND, host->addr + TUL_SFifo);
2171 outb(3, host->addr + TUL_SFifo);
2172 outb(1, host->addr + TUL_SFifo);
2173 outb(host->msg[2], host->addr + TUL_SFifo);
2174 outb(host->msg[3], host->addr + TUL_SFifo);
2175 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2176 return wait_tulip(host);
2177 }
2178 if (host->msg[0] != 2 || host->msg[1] != 3)
2179 return initio_msgout_reject(host);
2180 /* if it's WIDE DATA XFER REQ */
2181 if (host->active_tc->flags & TCF_NO_WDTR) {
2182 host->msg[2] = 0;
2183 } else {
2184 if (host->msg[2] > 2) /* > 32 bits */
2185 return initio_msgout_reject(host);
2186 if (host->msg[2] == 2) { /* == 32 */
2187 host->msg[2] = 1;
2188 } else {
2189 if ((host->active_tc->flags & TCF_NO_WDTR) == 0) {
2190 wdtr_done(host);
2191 if ((host->active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0)
2192 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2193 return initio_msgin_accept(host);
2194 }
2195 }
2196 }
2197 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2198
2199 if (initio_msgin_accept(host) != MSG_OUT)
2200 return host->phase;
2201 /* WDTR msg out */
2202 outb(MSG_EXTEND, host->addr + TUL_SFifo);
2203 outb(2, host->addr + TUL_SFifo);
2204 outb(3, host->addr + TUL_SFifo);
2205 outb(host->msg[2], host->addr + TUL_SFifo);
2206 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2207 return wait_tulip(host);
2208}
2209
2210static int initio_msgin_sync(struct initio_host * host)
2211{
2212 char default_period;
2213
2214 default_period = initio_rate_tbl[host->active_tc->flags & TCF_SCSI_RATE];
2215 if (host->msg[3] > MAX_OFFSET) {
2216 host->msg[3] = MAX_OFFSET;
2217 if (host->msg[2] < default_period) {
2218 host->msg[2] = default_period;
2219 return 1;
2220 }
2221 if (host->msg[2] >= 59) /* Change to async */
2222 host->msg[3] = 0;
2223 return 1;
2224 }
2225 /* offset requests asynchronous transfers ? */
2226 if (host->msg[3] == 0) {
2227 return 0;
2228 }
2229 if (host->msg[2] < default_period) {
2230 host->msg[2] = default_period;
2231 return 1;
2232 }
2233 if (host->msg[2] >= 59) {
2234 host->msg[3] = 0;
2235 return 1;
2236 }
2237 return 0;
2238}
2239
2240static int wdtr_done(struct initio_host * host)
2241{
2242 host->active_tc->flags &= ~TCF_SYNC_DONE;
2243 host->active_tc->flags |= TCF_WDTR_DONE;
2244
2245 host->active_tc->js_period = 0;
2246 if (host->msg[2]) /* if 16 bit */
2247 host->active_tc->js_period |= TSC_WIDE_SCSI;
2248 host->active_tc->sconfig0 &= ~TSC_ALT_PERIOD;
2249 outb(host->active_tc->sconfig0, host->addr + TUL_SConfig);
2250 outb(host->active_tc->js_period, host->addr + TUL_SPeriod);
2251
2252 return 1;
2253}
2254
2255static int initio_sync_done(struct initio_host * host)
2256{
2257 int i;
2258
2259 host->active_tc->flags |= TCF_SYNC_DONE;
2260
2261 if (host->msg[3]) {
2262 host->active_tc->js_period |= host->msg[3];
2263 for (i = 0; i < 8; i++) {
2264 if (initio_rate_tbl[i] >= host->msg[2]) /* pick the big one */
2265 break;
2266 }
2267 host->active_tc->js_period |= (i << 4);
2268 host->active_tc->sconfig0 |= TSC_ALT_PERIOD;
2269 }
2270 outb(host->active_tc->sconfig0, host->addr + TUL_SConfig);
2271 outb(host->active_tc->js_period, host->addr + TUL_SPeriod);
2272
2273 return -1;
2274}
2275
2276
2277static int initio_post_scsi_rst(struct initio_host * host)
2278{
2279 struct scsi_ctrl_blk *scb;
2280 struct target_control *active_tc;
2281 int i;
2282
2283 host->active = NULL;
2284 host->active_tc = NULL;
2285 host->flags = 0;
2286
2287 while ((scb = initio_pop_busy_scb(host)) != NULL) {
2288 scb->hastat = HOST_BAD_PHAS;
2289 initio_append_done_scb(host, scb);
2290 }
2291 /* clear sync done flag */
2292 active_tc = &host->targets[0];
2293 for (i = 0; i < host->max_tar; active_tc++, i++) {
2294 active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
2295 /* Initialize the sync. xfer register values to an asyn xfer */
2296 active_tc->js_period = 0;
2297 active_tc->sconfig0 = host->sconf1;
2298 host->act_tags[0] = 0; /* 07/22/98 */
2299 host->targets[i].flags &= ~TCF_BUSY; /* 07/22/98 */
2300 } /* for */
2301
2302 return -1;
2303}
2304
2305static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb)
2306{
2307 scb->status |= SCB_SELECT;
2308 scb->next_state = 0x1;
2309 host->active = scb;
2310 host->active_tc = &host->targets[scb->target];
2311 outb(TSC_SELATNSTOP, host->addr + TUL_SCmd);
2312}
2313
2314
2315static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb)
2316{
2317 int i;
2318
2319 scb->status |= SCB_SELECT;
2320 scb->next_state = 0x2;
2321
2322 outb(scb->ident, host->addr + TUL_SFifo);
2323 for (i = 0; i < (int) scb->cdblen; i++)
2324 outb(scb->cdb[i], host->addr + TUL_SFifo);
2325 host->active_tc = &host->targets[scb->target];
2326 host->active = scb;
2327 outb(TSC_SEL_ATN, host->addr + TUL_SCmd);
2328}
2329
2330static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb)
2331{
2332 int i;
2333
2334 scb->status |= SCB_SELECT;
2335 scb->next_state = 0x2;
2336
2337 outb(scb->ident, host->addr + TUL_SFifo);
2338 outb(scb->tagmsg, host->addr + TUL_SFifo);
2339 outb(scb->tagid, host->addr + TUL_SFifo);
2340 for (i = 0; i < scb->cdblen; i++)
2341 outb(scb->cdb[i], host->addr + TUL_SFifo);
2342 host->active_tc = &host->targets[scb->target];
2343 host->active = scb;
2344 outb(TSC_SEL_ATN3, host->addr + TUL_SCmd);
2345}
2346
2347/**
2348 * initio_bus_device_reset - SCSI Bus Device Reset
2349 * @host: InitIO host to reset
2350 *
2351 * Perform a device reset and abort all pending SCBs for the
2352 * victim device
2353 */
2354int initio_bus_device_reset(struct initio_host * host)
2355{
2356 struct scsi_ctrl_blk *scb = host->active;
2357 struct target_control *active_tc = host->active_tc;
2358 struct scsi_ctrl_blk *tmp, *prev;
2359 u8 tar;
2360
2361 if (host->phase != MSG_OUT)
2362 return int_initio_bad_seq(host); /* Unexpected phase */
2363
2364 initio_unlink_pend_scb(host, scb);
2365 initio_release_scb(host, scb);
2366
2367
2368 tar = scb->target; /* target */
2369 active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE | TCF_BUSY);
2370 /* clr sync. nego & WDTR flags 07/22/98 */
2371
2372 /* abort all SCB with same target */
2373 prev = tmp = host->first_busy; /* Check Busy queue */
2374 while (tmp != NULL) {
2375 if (tmp->target == tar) {
2376 /* unlink it */
2377 if (tmp == host->first_busy) {
2378 if ((host->first_busy = tmp->next) == NULL)
2379 host->last_busy = NULL;
2380 } else {
2381 prev->next = tmp->next;
2382 if (tmp == host->last_busy)
2383 host->last_busy = prev;
2384 }
2385 tmp->hastat = HOST_ABORTED;
2386 initio_append_done_scb(host, tmp);
2387 }
2388 /* Previous haven't change */
2389 else {
2390 prev = tmp;
2391 }
2392 tmp = tmp->next;
2393 }
2394 outb(MSG_DEVRST, host->addr + TUL_SFifo);
2395 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2396 return initio_wait_disc(host);
2397
2398}
2399
2400static int initio_msgin_accept(struct initio_host * host)
2401{
2402 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2403 return wait_tulip(host);
2404}
2405
2406static int wait_tulip(struct initio_host * host)
2407{
2408
2409 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0))
2410 & TSS_INT_PENDING))
2411 cpu_relax();
2412
2413 host->jsint = inb(host->addr + TUL_SInt);
2414 host->phase = host->jsstatus0 & TSS_PH_MASK;
2415 host->jsstatus1 = inb(host->addr + TUL_SStatus1);
2416
2417 if (host->jsint & TSS_RESEL_INT) /* if SCSI bus reset detected */
2418 return int_initio_resel(host);
2419 if (host->jsint & TSS_SEL_TIMEOUT) /* if selected/reselected timeout interrupt */
2420 return int_initio_busfree(host);
2421 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */
2422 return int_initio_scsi_rst(host);
2423
2424 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
2425 if (host->flags & HCF_EXPECT_DONE_DISC) {
2426 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2427 initio_unlink_busy_scb(host, host->active);
2428 host->active->hastat = 0;
2429 initio_append_done_scb(host, host->active);
2430 host->active = NULL;
2431 host->active_tc = NULL;
2432 host->flags &= ~HCF_EXPECT_DONE_DISC;
2433 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2434 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2435 return -1;
2436 }
2437 if (host->flags & HCF_EXPECT_DISC) {
2438 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2439 host->active = NULL;
2440 host->active_tc = NULL;
2441 host->flags &= ~HCF_EXPECT_DISC;
2442 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2443 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2444 return -1;
2445 }
2446 return int_initio_busfree(host);
2447 }
2448 /* The old code really does the below. Can probably be removed */
2449 if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV))
2450 return host->phase;
2451 return host->phase;
2452}
2453
2454static int initio_wait_disc(struct initio_host * host)
2455{
2456 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING))
2457 cpu_relax();
2458
2459 host->jsint = inb(host->addr + TUL_SInt);
2460
2461 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */
2462 return int_initio_scsi_rst(host);
2463 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
2464 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2465 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2466 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2467 host->active = NULL;
2468 return -1;
2469 }
2470 return initio_bad_seq(host);
2471}
2472
2473static int initio_wait_done_disc(struct initio_host * host)
2474{
2475 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0))
2476 & TSS_INT_PENDING))
2477 cpu_relax();
2478
2479 host->jsint = inb(host->addr + TUL_SInt);
2480
2481 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */
2482 return int_initio_scsi_rst(host);
2483 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
2484 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2485 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2486 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2487 initio_unlink_busy_scb(host, host->active);
2488
2489 initio_append_done_scb(host, host->active);
2490 host->active = NULL;
2491 return -1;
2492 }
2493 return initio_bad_seq(host);
2494}
2495
2496/**
2497 * i91u_intr - IRQ handler
2498 * @irqno: IRQ number
2499 * @dev_id: IRQ identifier
2500 *
2501 * Take the relevant locks and then invoke the actual isr processing
2502 * code under the lock.
2503 */
2504
2505static irqreturn_t i91u_intr(int irqno, void *dev_id)
2506{
2507 struct Scsi_Host *dev = dev_id;
2508 unsigned long flags;
2509 int r;
2510
2511 spin_lock_irqsave(dev->host_lock, flags);
2512 r = initio_isr((struct initio_host *)dev->hostdata);
2513 spin_unlock_irqrestore(dev->host_lock, flags);
2514 if (r)
2515 return IRQ_HANDLED;
2516 else
2517 return IRQ_NONE;
2518}
2519
2520
2521/**
2522 * initio_build_scb - Build the mappings and SCB
2523 * @host: InitIO host taking the command
2524 * @cblk: Firmware command block
2525 * @cmnd: SCSI midlayer command block
2526 *
2527 * Translate the abstract SCSI command into a firmware command block
2528 * suitable for feeding to the InitIO host controller. This also requires
2529 * we build the scatter gather lists and ensure they are mapped properly.
2530 */
2531
2532static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * cblk, struct scsi_cmnd * cmnd)
2533{ /* Create corresponding SCB */
2534 struct scatterlist *sglist;
2535 struct sg_entry *sg; /* Pointer to SG list */
2536 int i, nseg;
2537 long total_len;
2538 dma_addr_t dma_addr;
2539
2540 /* Fill in the command headers */
2541 cblk->post = i91uSCBPost; /* i91u's callback routine */
2542 cblk->srb = cmnd;
2543 cblk->opcode = ExecSCSI;
2544 cblk->flags = SCF_POST; /* After SCSI done, call post routine */
2545 cblk->target = cmnd->device->id;
2546 cblk->lun = cmnd->device->lun;
2547 cblk->ident = cmnd->device->lun | DISC_ALLOW;
2548
2549 cblk->flags |= SCF_SENSE; /* Turn on auto request sense */
2550
2551 /* Map the sense buffer into bus memory */
2552 dma_addr = dma_map_single(&host->pci_dev->dev, cmnd->sense_buffer,
2553 SENSE_SIZE, DMA_FROM_DEVICE);
2554 cblk->senseptr = (u32)dma_addr;
2555 cblk->senselen = SENSE_SIZE;
2556 cmnd->SCp.ptr = (char *)(unsigned long)dma_addr;
2557 cblk->cdblen = cmnd->cmd_len;
2558
2559 /* Clear the returned status */
2560 cblk->hastat = 0;
2561 cblk->tastat = 0;
2562 /* Command the command */
2563 memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len);
2564
2565 /* Set up tags */
2566 if (cmnd->device->tagged_supported) { /* Tag Support */
2567 cblk->tagmsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */
2568 } else {
2569 cblk->tagmsg = 0; /* No tag support */
2570 }
2571
2572 /* todo handle map_sg error */
2573 nseg = scsi_dma_map(cmnd);
2574 BUG_ON(nseg < 0);
2575 if (nseg) {
2576 dma_addr = dma_map_single(&host->pci_dev->dev, &cblk->sglist[0],
2577 sizeof(struct sg_entry) * TOTAL_SG_ENTRY,
2578 DMA_BIDIRECTIONAL);
2579 cblk->bufptr = (u32)dma_addr;
2580 cmnd->SCp.dma_handle = dma_addr;
2581
2582 cblk->sglen = nseg;
2583
2584 cblk->flags |= SCF_SG; /* Turn on SG list flag */
2585 total_len = 0;
2586 sg = &cblk->sglist[0];
2587 scsi_for_each_sg(cmnd, sglist, cblk->sglen, i) {
2588 sg->data = cpu_to_le32((u32)sg_dma_address(sglist));
2589 sg->len = cpu_to_le32((u32)sg_dma_len(sglist));
2590 total_len += sg_dma_len(sglist);
2591 ++sg;
2592 }
2593
2594 cblk->buflen = (scsi_bufflen(cmnd) > total_len) ?
2595 total_len : scsi_bufflen(cmnd);
2596 } else { /* No data transfer required */
2597 cblk->buflen = 0;
2598 cblk->sglen = 0;
2599 }
2600}
2601
2602/**
2603 * i91u_queuecommand - Queue a new command if possible
2604 * @cmd: SCSI command block from the mid layer
2605 * @done: Completion handler
2606 *
2607 * Attempts to queue a new command with the host adapter. Will return
2608 * zero if successful or indicate a host busy condition if not (which
2609 * will cause the mid layer to call us again later with the command)
2610 */
2611
2612static int i91u_queuecommand_lck(struct scsi_cmnd *cmd,
2613 void (*done)(struct scsi_cmnd *))
2614{
2615 struct initio_host *host = (struct initio_host *) cmd->device->host->hostdata;
2616 struct scsi_ctrl_blk *cmnd;
2617
2618 cmd->scsi_done = done;
2619
2620 cmnd = initio_alloc_scb(host);
2621 if (!cmnd)
2622 return SCSI_MLQUEUE_HOST_BUSY;
2623
2624 initio_build_scb(host, cmnd, cmd);
2625 initio_exec_scb(host, cmnd);
2626 return 0;
2627}
2628
2629static DEF_SCSI_QCMD(i91u_queuecommand)
2630
2631/**
2632 * i91u_bus_reset - reset the SCSI bus
2633 * @cmnd: Command block we want to trigger the reset for
2634 *
2635 * Initiate a SCSI bus reset sequence
2636 */
2637
2638static int i91u_bus_reset(struct scsi_cmnd * cmnd)
2639{
2640 struct initio_host *host;
2641
2642 host = (struct initio_host *) cmnd->device->host->hostdata;
2643
2644 spin_lock_irq(cmnd->device->host->host_lock);
2645 initio_reset_scsi(host, 0);
2646 spin_unlock_irq(cmnd->device->host->host_lock);
2647
2648 return SUCCESS;
2649}
2650
2651/**
2652 * i91u_biospararm - return the "logical geometry
2653 * @sdev: SCSI device
2654 * @dev; Matching block device
2655 * @capacity: Sector size of drive
2656 * @info_array: Return space for BIOS geometry
2657 *
2658 * Map the device geometry in a manner compatible with the host
2659 * controller BIOS behaviour.
2660 *
2661 * FIXME: limited to 2^32 sector devices.
2662 */
2663
2664static int i91u_biosparam(struct scsi_device *sdev, struct block_device *dev,
2665 sector_t capacity, int *info_array)
2666{
2667 struct initio_host *host; /* Point to Host adapter control block */
2668 struct target_control *tc;
2669
2670 host = (struct initio_host *) sdev->host->hostdata;
2671 tc = &host->targets[sdev->id];
2672
2673 if (tc->heads) {
2674 info_array[0] = tc->heads;
2675 info_array[1] = tc->sectors;
2676 info_array[2] = (unsigned long)capacity / tc->heads / tc->sectors;
2677 } else {
2678 if (tc->drv_flags & TCF_DRV_255_63) {
2679 info_array[0] = 255;
2680 info_array[1] = 63;
2681 info_array[2] = (unsigned long)capacity / 255 / 63;
2682 } else {
2683 info_array[0] = 64;
2684 info_array[1] = 32;
2685 info_array[2] = (unsigned long)capacity >> 11;
2686 }
2687 }
2688
2689#if defined(DEBUG_BIOSPARAM)
2690 if (i91u_debug & debug_biosparam) {
2691 printk("bios geometry: head=%d, sec=%d, cyl=%d\n",
2692 info_array[0], info_array[1], info_array[2]);
2693 printk("WARNING: check, if the bios geometry is correct.\n");
2694 }
2695#endif
2696
2697 return 0;
2698}
2699
2700/**
2701 * i91u_unmap_scb - Unmap a command
2702 * @pci_dev: PCI device the command is for
2703 * @cmnd: The command itself
2704 *
2705 * Unmap any PCI mapping/IOMMU resources allocated when the command
2706 * was mapped originally as part of initio_build_scb
2707 */
2708
2709static void i91u_unmap_scb(struct pci_dev *pci_dev, struct scsi_cmnd *cmnd)
2710{
2711 /* auto sense buffer */
2712 if (cmnd->SCp.ptr) {
2713 dma_unmap_single(&pci_dev->dev,
2714 (dma_addr_t)((unsigned long)cmnd->SCp.ptr),
2715 SENSE_SIZE, DMA_FROM_DEVICE);
2716 cmnd->SCp.ptr = NULL;
2717 }
2718
2719 /* request buffer */
2720 if (scsi_sg_count(cmnd)) {
2721 dma_unmap_single(&pci_dev->dev, cmnd->SCp.dma_handle,
2722 sizeof(struct sg_entry) * TOTAL_SG_ENTRY,
2723 DMA_BIDIRECTIONAL);
2724
2725 scsi_dma_unmap(cmnd);
2726 }
2727}
2728
2729/**
2730 * i91uSCBPost - SCSI callback
2731 * @host: Pointer to host adapter control block.
2732 * @cmnd: Pointer to SCSI control block.
2733 *
2734 * This is callback routine be called when tulip finish one
2735 * SCSI command.
2736 */
2737
2738static void i91uSCBPost(u8 * host_mem, u8 * cblk_mem)
2739{
2740 struct scsi_cmnd *cmnd; /* Pointer to SCSI request block */
2741 struct initio_host *host;
2742 struct scsi_ctrl_blk *cblk;
2743
2744 host = (struct initio_host *) host_mem;
2745 cblk = (struct scsi_ctrl_blk *) cblk_mem;
2746 if ((cmnd = cblk->srb) == NULL) {
2747 printk(KERN_ERR "i91uSCBPost: SRB pointer is empty\n");
2748 WARN_ON(1);
2749 initio_release_scb(host, cblk); /* Release SCB for current channel */
2750 return;
2751 }
2752
2753 /*
2754 * Remap the firmware error status into a mid layer one
2755 */
2756 switch (cblk->hastat) {
2757 case 0x0:
2758 case 0xa: /* Linked command complete without error and linked normally */
2759 case 0xb: /* Linked command complete without error interrupt generated */
2760 cblk->hastat = 0;
2761 break;
2762
2763 case 0x11: /* Selection time out-The initiator selection or target
2764 reselection was not complete within the SCSI Time out period */
2765 cblk->hastat = DID_TIME_OUT;
2766 break;
2767
2768 case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus
2769 phase sequence was requested by the target. The host adapter
2770 will generate a SCSI Reset Condition, notifying the host with
2771 a SCRD interrupt */
2772 cblk->hastat = DID_RESET;
2773 break;
2774
2775 case 0x1a: /* SCB Aborted. 07/21/98 */
2776 cblk->hastat = DID_ABORT;
2777 break;
2778
2779 case 0x12: /* Data overrun/underrun-The target attempted to transfer more data
2780 than was allocated by the Data Length field or the sum of the
2781 Scatter / Gather Data Length fields. */
2782 case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
2783 case 0x16: /* Invalid SCB Operation Code. */
2784
2785 default:
2786 printk("ini9100u: %x %x\n", cblk->hastat, cblk->tastat);
2787 cblk->hastat = DID_ERROR; /* Couldn't find any better */
2788 break;
2789 }
2790
2791 cmnd->result = cblk->tastat | (cblk->hastat << 16);
2792 i91u_unmap_scb(host->pci_dev, cmnd);
2793 cmnd->scsi_done(cmnd); /* Notify system DONE */
2794 initio_release_scb(host, cblk); /* Release SCB for current channel */
2795}
2796
2797static struct scsi_host_template initio_template = {
2798 .proc_name = "INI9100U",
2799 .name = "Initio INI-9X00U/UW SCSI device driver",
2800 .queuecommand = i91u_queuecommand,
2801 .eh_bus_reset_handler = i91u_bus_reset,
2802 .bios_param = i91u_biosparam,
2803 .can_queue = MAX_TARGETS * i91u_MAXQUEUE,
2804 .this_id = 1,
2805 .sg_tablesize = SG_ALL,
2806};
2807
2808static int initio_probe_one(struct pci_dev *pdev,
2809 const struct pci_device_id *id)
2810{
2811 struct Scsi_Host *shost;
2812 struct initio_host *host;
2813 u32 reg;
2814 u16 bios_seg;
2815 struct scsi_ctrl_blk *scb, *tmp, *prev = NULL /* silence gcc */;
2816 int num_scb, i, error;
2817
2818 error = pci_enable_device(pdev);
2819 if (error)
2820 return error;
2821
2822 pci_read_config_dword(pdev, 0x44, (u32 *) & reg);
2823 bios_seg = (u16) (reg & 0xFF);
2824 if (((reg & 0xFF00) >> 8) == 0xFF)
2825 reg = 0;
2826 bios_seg = (bios_seg << 8) + ((u16) ((reg & 0xFF00) >> 8));
2827
2828 if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
2829 printk(KERN_WARNING "i91u: Could not set 32 bit DMA mask\n");
2830 error = -ENODEV;
2831 goto out_disable_device;
2832 }
2833 shost = scsi_host_alloc(&initio_template, sizeof(struct initio_host));
2834 if (!shost) {
2835 printk(KERN_WARNING "initio: Could not allocate host structure.\n");
2836 error = -ENOMEM;
2837 goto out_disable_device;
2838 }
2839 host = (struct initio_host *)shost->hostdata;
2840 memset(host, 0, sizeof(struct initio_host));
2841 host->addr = pci_resource_start(pdev, 0);
2842 host->bios_addr = bios_seg;
2843
2844 if (!request_region(host->addr, 256, "i91u")) {
2845 printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr);
2846 error = -ENODEV;
2847 goto out_host_put;
2848 }
2849
2850 if (initio_tag_enable) /* 1.01i */
2851 num_scb = MAX_TARGETS * i91u_MAXQUEUE;
2852 else
2853 num_scb = MAX_TARGETS + 3; /* 1-tape, 1-CD_ROM, 1- extra */
2854
2855 for (; num_scb >= MAX_TARGETS + 3; num_scb--) {
2856 i = num_scb * sizeof(struct scsi_ctrl_blk);
2857 if ((scb = kzalloc(i, GFP_DMA)) != NULL)
2858 break;
2859 }
2860
2861 if (!scb) {
2862 printk(KERN_WARNING "initio: Cannot allocate SCB array.\n");
2863 error = -ENOMEM;
2864 goto out_release_region;
2865 }
2866
2867 host->pci_dev = pdev;
2868
2869 host->semaph = 1;
2870 spin_lock_init(&host->semaph_lock);
2871 host->num_scbs = num_scb;
2872 host->scb = scb;
2873 host->next_pending = scb;
2874 host->next_avail = scb;
2875 for (i = 0, tmp = scb; i < num_scb; i++, tmp++) {
2876 tmp->tagid = i;
2877 if (i != 0)
2878 prev->next = tmp;
2879 prev = tmp;
2880 }
2881 prev->next = NULL;
2882 host->scb_end = tmp;
2883 host->first_avail = scb;
2884 host->last_avail = prev;
2885 spin_lock_init(&host->avail_lock);
2886
2887 initio_init(host, phys_to_virt(((u32)bios_seg << 4)));
2888
2889 host->jsstatus0 = 0;
2890
2891 shost->io_port = host->addr;
2892 shost->n_io_port = 0xff;
2893 shost->can_queue = num_scb; /* 03/05/98 */
2894 shost->unique_id = host->addr;
2895 shost->max_id = host->max_tar;
2896 shost->max_lun = 32; /* 10/21/97 */
2897 shost->irq = pdev->irq;
2898 shost->this_id = host->scsi_id; /* Assign HCS index */
2899 shost->base = host->addr;
2900 shost->sg_tablesize = TOTAL_SG_ENTRY;
2901
2902 error = request_irq(pdev->irq, i91u_intr, IRQF_SHARED, "i91u", shost);
2903 if (error < 0) {
2904 printk(KERN_WARNING "initio: Unable to request IRQ %d\n", pdev->irq);
2905 goto out_free_scbs;
2906 }
2907
2908 pci_set_drvdata(pdev, shost);
2909
2910 error = scsi_add_host(shost, &pdev->dev);
2911 if (error)
2912 goto out_free_irq;
2913 scsi_scan_host(shost);
2914 return 0;
2915out_free_irq:
2916 free_irq(pdev->irq, shost);
2917out_free_scbs:
2918 kfree(host->scb);
2919out_release_region:
2920 release_region(host->addr, 256);
2921out_host_put:
2922 scsi_host_put(shost);
2923out_disable_device:
2924 pci_disable_device(pdev);
2925 return error;
2926}
2927
2928/**
2929 * initio_remove_one - control shutdown
2930 * @pdev: PCI device being released
2931 *
2932 * Release the resources assigned to this adapter after it has
2933 * finished being used.
2934 */
2935
2936static void initio_remove_one(struct pci_dev *pdev)
2937{
2938 struct Scsi_Host *host = pci_get_drvdata(pdev);
2939 struct initio_host *s = (struct initio_host *)host->hostdata;
2940 scsi_remove_host(host);
2941 free_irq(pdev->irq, host);
2942 release_region(s->addr, 256);
2943 scsi_host_put(host);
2944 pci_disable_device(pdev);
2945}
2946
2947MODULE_LICENSE("GPL");
2948
2949static struct pci_device_id initio_pci_tbl[] = {
2950 {PCI_VENDOR_ID_INIT, 0x9500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2951 {PCI_VENDOR_ID_INIT, 0x9400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2952 {PCI_VENDOR_ID_INIT, 0x9401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2953 {PCI_VENDOR_ID_INIT, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2954 {PCI_VENDOR_ID_DOMEX, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2955 {0,}
2956};
2957MODULE_DEVICE_TABLE(pci, initio_pci_tbl);
2958
2959static struct pci_driver initio_pci_driver = {
2960 .name = "initio",
2961 .id_table = initio_pci_tbl,
2962 .probe = initio_probe_one,
2963 .remove = initio_remove_one,
2964};
2965
2966static int __init initio_init_driver(void)
2967{
2968 return pci_register_driver(&initio_pci_driver);
2969}
2970
2971static void __exit initio_exit_driver(void)
2972{
2973 pci_unregister_driver(&initio_pci_driver);
2974}
2975
2976MODULE_DESCRIPTION("Initio INI-9X00U/UW SCSI device driver");
2977MODULE_AUTHOR("Initio Corporation");
2978MODULE_LICENSE("GPL");
2979
2980module_init(initio_init_driver);
2981module_exit(initio_exit_driver);