Loading...
1/*
2 * linux/arch/arm/mach-omap1/board-osk.c
3 *
4 * Board specific init for OMAP5912 OSK
5 *
6 * Written by Dirk Behme <dirk.behme@de.bosch.com>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 *
13 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
14 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
15 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
16 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
19 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
20 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23 *
24 * You should have received a copy of the GNU General Public License along
25 * with this program; if not, write to the Free Software Foundation, Inc.,
26 * 675 Mass Ave, Cambridge, MA 02139, USA.
27 */
28#include <linux/gpio.h>
29#include <linux/kernel.h>
30#include <linux/init.h>
31#include <linux/platform_device.h>
32#include <linux/interrupt.h>
33#include <linux/irq.h>
34#include <linux/i2c.h>
35#include <linux/leds.h>
36#include <linux/smc91x.h>
37#include <linux/omapfb.h>
38#include <linux/mtd/mtd.h>
39#include <linux/mtd/partitions.h>
40#include <linux/mtd/physmap.h>
41#include <linux/i2c/tps65010.h>
42#include <linux/platform_data/gpio-omap.h>
43#include <linux/platform_data/omap1_bl.h>
44
45#include <asm/mach-types.h>
46#include <asm/mach/arch.h>
47#include <asm/mach/map.h>
48
49#include <mach/flash.h>
50#include <mach/mux.h>
51#include <mach/tc.h>
52
53#include <mach/hardware.h>
54#include <mach/usb.h>
55
56#include "common.h"
57
58/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
59#define OMAP_OSK_ETHR_START 0x04800300
60
61/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with
62 * alternate pin configurations for hardware-controlled blinking.
63 */
64#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
65# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0)
66# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1)
67# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2)
68# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3)
69# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4)
70# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5)
71
72static struct mtd_partition osk_partitions[] = {
73 /* bootloader (U-Boot, etc) in first sector */
74 {
75 .name = "bootloader",
76 .offset = 0,
77 .size = SZ_128K,
78 .mask_flags = MTD_WRITEABLE, /* force read-only */
79 },
80 /* bootloader params in the next sector */
81 {
82 .name = "params",
83 .offset = MTDPART_OFS_APPEND,
84 .size = SZ_128K,
85 .mask_flags = 0,
86 }, {
87 .name = "kernel",
88 .offset = MTDPART_OFS_APPEND,
89 .size = SZ_2M,
90 .mask_flags = 0
91 }, {
92 .name = "filesystem",
93 .offset = MTDPART_OFS_APPEND,
94 .size = MTDPART_SIZ_FULL,
95 .mask_flags = 0
96 }
97};
98
99static struct physmap_flash_data osk_flash_data = {
100 .width = 2,
101 .set_vpp = omap1_set_vpp,
102 .parts = osk_partitions,
103 .nr_parts = ARRAY_SIZE(osk_partitions),
104};
105
106static struct resource osk_flash_resource = {
107 /* this is on CS3, wherever it's mapped */
108 .flags = IORESOURCE_MEM,
109};
110
111static struct platform_device osk5912_flash_device = {
112 .name = "physmap-flash",
113 .id = 0,
114 .dev = {
115 .platform_data = &osk_flash_data,
116 },
117 .num_resources = 1,
118 .resource = &osk_flash_resource,
119};
120
121static struct smc91x_platdata osk5912_smc91x_info = {
122 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
123 .leda = RPC_LED_100_10,
124 .ledb = RPC_LED_TX_RX,
125};
126
127static struct resource osk5912_smc91x_resources[] = {
128 [0] = {
129 .start = OMAP_OSK_ETHR_START, /* Physical */
130 .end = OMAP_OSK_ETHR_START + 0xf,
131 .flags = IORESOURCE_MEM,
132 },
133 [1] = {
134 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
135 },
136};
137
138static struct platform_device osk5912_smc91x_device = {
139 .name = "smc91x",
140 .id = -1,
141 .dev = {
142 .platform_data = &osk5912_smc91x_info,
143 },
144 .num_resources = ARRAY_SIZE(osk5912_smc91x_resources),
145 .resource = osk5912_smc91x_resources,
146};
147
148static struct resource osk5912_cf_resources[] = {
149 [0] = {
150 .flags = IORESOURCE_IRQ,
151 },
152};
153
154static struct platform_device osk5912_cf_device = {
155 .name = "omap_cf",
156 .id = -1,
157 .dev = {
158 .platform_data = (void *) 2 /* CS2 */,
159 },
160 .num_resources = ARRAY_SIZE(osk5912_cf_resources),
161 .resource = osk5912_cf_resources,
162};
163
164static struct platform_device *osk5912_devices[] __initdata = {
165 &osk5912_flash_device,
166 &osk5912_smc91x_device,
167 &osk5912_cf_device,
168};
169
170static struct gpio_led tps_leds[] = {
171 /* NOTE: D9 and D2 have hardware blink support.
172 * Also, D9 requires non-battery power.
173 */
174 { .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
175 .default_trigger = "ide-disk", },
176 { .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
177 { .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
178 .default_trigger = "heartbeat", },
179};
180
181static struct gpio_led_platform_data tps_leds_data = {
182 .num_leds = 3,
183 .leds = tps_leds,
184};
185
186static struct platform_device osk5912_tps_leds = {
187 .name = "leds-gpio",
188 .id = 0,
189 .dev.platform_data = &tps_leds_data,
190};
191
192static int osk_tps_setup(struct i2c_client *client, void *context)
193{
194 if (!IS_BUILTIN(CONFIG_TPS65010))
195 return -ENOSYS;
196
197 /* Set GPIO 1 HIGH to disable VBUS power supply;
198 * OHCI driver powers it up/down as needed.
199 */
200 gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
201 gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
202
203 /* Set GPIO 2 high so LED D3 is off by default */
204 tps65010_set_gpio_out_value(GPIO2, HIGH);
205
206 /* Set GPIO 3 low to take ethernet out of reset */
207 gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
208 gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);
209
210 /* GPIO4 is VDD_DSP */
211 gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
212 gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
213 /* REVISIT if DSP support isn't configured, power it off ... */
214
215 /* Let LED1 (D9) blink; leds-gpio may override it */
216 tps65010_set_led(LED1, BLINK);
217
218 /* Set LED2 off by default */
219 tps65010_set_led(LED2, OFF);
220
221 /* Enable LOW_PWR handshake */
222 tps65010_set_low_pwr(ON);
223
224 /* Switch VLDO2 to 3.0V for AIC23 */
225 tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
226 | TPS_LDO1_ENABLE);
227
228 /* register these three LEDs */
229 osk5912_tps_leds.dev.parent = &client->dev;
230 platform_device_register(&osk5912_tps_leds);
231
232 return 0;
233}
234
235static struct tps65010_board tps_board = {
236 .base = OSK_TPS_GPIO_BASE,
237 .outmask = 0x0f,
238 .setup = osk_tps_setup,
239};
240
241static struct i2c_board_info __initdata osk_i2c_board_info[] = {
242 {
243 I2C_BOARD_INFO("tps65010", 0x48),
244 .platform_data = &tps_board,
245
246 },
247 {
248 I2C_BOARD_INFO("tlv320aic23", 0x1B),
249 },
250 /* TODO when driver support is ready:
251 * - optionally on Mistral, ov9640 camera sensor at 0x30
252 */
253};
254
255static void __init osk_init_smc91x(void)
256{
257 u32 l;
258
259 if ((gpio_request(0, "smc_irq")) < 0) {
260 printk("Error requesting gpio 0 for smc91x irq\n");
261 return;
262 }
263
264 /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
265 l = omap_readl(EMIFS_CCS(1));
266 l |= 0x3;
267 omap_writel(l, EMIFS_CCS(1));
268}
269
270static void __init osk_init_cf(void)
271{
272 omap_cfg_reg(M7_1610_GPIO62);
273 if ((gpio_request(62, "cf_irq")) < 0) {
274 printk("Error requesting gpio 62 for CF irq\n");
275 return;
276 }
277 /* the CF I/O IRQ is really active-low */
278 irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
279}
280
281static struct omap_usb_config osk_usb_config __initdata = {
282 /* has usb host connector (A) ... for development it can also
283 * be used, with a NONSTANDARD gender-bending cable/dongle, as
284 * a peripheral.
285 */
286#ifdef CONFIG_USB_GADGET_OMAP
287 .register_dev = 1,
288 .hmc_mode = 0,
289#else
290 .register_host = 1,
291 .hmc_mode = 16,
292 .rwc = 1,
293#endif
294 .pins[0] = 2,
295};
296
297#ifdef CONFIG_OMAP_OSK_MISTRAL
298static struct omap_lcd_config osk_lcd_config __initdata = {
299 .ctrl_name = "internal",
300};
301#endif
302
303#ifdef CONFIG_OMAP_OSK_MISTRAL
304
305#include <linux/input.h>
306#include <linux/platform_data/at24.h>
307#include <linux/spi/spi.h>
308#include <linux/spi/ads7846.h>
309
310#include <linux/platform_data/keypad-omap.h>
311
312static struct at24_platform_data at24c04 = {
313 .byte_len = SZ_4K / 8,
314 .page_size = 16,
315};
316
317static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
318 {
319 /* NOTE: powered from LCD supply */
320 I2C_BOARD_INFO("24c04", 0x50),
321 .platform_data = &at24c04,
322 },
323 /* TODO when driver support is ready:
324 * - optionally ov9640 camera sensor at 0x30
325 */
326};
327
328static const unsigned int osk_keymap[] = {
329 /* KEY(col, row, code) */
330 KEY(0, 0, KEY_F1), /* SW4 */
331 KEY(3, 0, KEY_UP), /* (sw2/up) */
332 KEY(1, 1, KEY_LEFTCTRL), /* SW5 */
333 KEY(2, 1, KEY_LEFT), /* (sw2/left) */
334 KEY(0, 2, KEY_SPACE), /* SW3 */
335 KEY(1, 2, KEY_ESC), /* SW6 */
336 KEY(2, 2, KEY_DOWN), /* (sw2/down) */
337 KEY(2, 3, KEY_ENTER), /* (sw2/select) */
338 KEY(3, 3, KEY_RIGHT), /* (sw2/right) */
339};
340
341static const struct matrix_keymap_data osk_keymap_data = {
342 .keymap = osk_keymap,
343 .keymap_size = ARRAY_SIZE(osk_keymap),
344};
345
346static struct omap_kp_platform_data osk_kp_data = {
347 .rows = 8,
348 .cols = 8,
349 .keymap_data = &osk_keymap_data,
350 .delay = 9,
351};
352
353static struct resource osk5912_kp_resources[] = {
354 [0] = {
355 .start = INT_KEYBOARD,
356 .end = INT_KEYBOARD,
357 .flags = IORESOURCE_IRQ,
358 },
359};
360
361static struct platform_device osk5912_kp_device = {
362 .name = "omap-keypad",
363 .id = -1,
364 .dev = {
365 .platform_data = &osk_kp_data,
366 },
367 .num_resources = ARRAY_SIZE(osk5912_kp_resources),
368 .resource = osk5912_kp_resources,
369};
370
371static struct omap_backlight_config mistral_bl_data = {
372 .default_intensity = 0xa0,
373};
374
375static struct platform_device mistral_bl_device = {
376 .name = "omap-bl",
377 .id = -1,
378 .dev = {
379 .platform_data = &mistral_bl_data,
380 },
381};
382
383static struct platform_device osk5912_lcd_device = {
384 .name = "lcd_osk",
385 .id = -1,
386};
387
388static struct gpio_led mistral_gpio_led_pins[] = {
389 {
390 .name = "mistral:red",
391 .default_trigger = "heartbeat",
392 .gpio = 3,
393 },
394 {
395 .name = "mistral:green",
396 .default_trigger = "cpu0",
397 .gpio = OMAP_MPUIO(4),
398 },
399};
400
401static struct gpio_led_platform_data mistral_gpio_led_data = {
402 .leds = mistral_gpio_led_pins,
403 .num_leds = ARRAY_SIZE(mistral_gpio_led_pins),
404};
405
406static struct platform_device mistral_gpio_leds = {
407 .name = "leds-gpio",
408 .id = -1,
409 .dev = {
410 .platform_data = &mistral_gpio_led_data,
411 },
412};
413
414static struct platform_device *mistral_devices[] __initdata = {
415 &osk5912_kp_device,
416 &mistral_bl_device,
417 &osk5912_lcd_device,
418 &mistral_gpio_leds,
419};
420
421static int mistral_get_pendown_state(void)
422{
423 return !gpio_get_value(4);
424}
425
426static const struct ads7846_platform_data mistral_ts_info = {
427 .model = 7846,
428 .vref_delay_usecs = 100, /* internal, no capacitor */
429 .x_plate_ohms = 419,
430 .y_plate_ohms = 486,
431 .get_pendown_state = mistral_get_pendown_state,
432};
433
434static struct spi_board_info __initdata mistral_boardinfo[] = { {
435 /* MicroWire (bus 2) CS0 has an ads7846e */
436 .modalias = "ads7846",
437 .platform_data = &mistral_ts_info,
438 .max_speed_hz = 120000 /* max sample rate at 3V */
439 * 26 /* command + data + overhead */,
440 .bus_num = 2,
441 .chip_select = 0,
442} };
443
444#ifdef CONFIG_PM
445static irqreturn_t
446osk_mistral_wake_interrupt(int irq, void *ignored)
447{
448 return IRQ_HANDLED;
449}
450#endif
451
452static void __init osk_mistral_init(void)
453{
454 /* NOTE: we could actually tell if there's a Mistral board
455 * attached, e.g. by trying to read something from the ads7846.
456 * But this arch_init() code is too early for that, since we
457 * can't talk to the ads or even the i2c eeprom.
458 */
459
460 /* parallel camera interface */
461 omap_cfg_reg(J15_1610_CAM_LCLK);
462 omap_cfg_reg(J18_1610_CAM_D7);
463 omap_cfg_reg(J19_1610_CAM_D6);
464 omap_cfg_reg(J14_1610_CAM_D5);
465 omap_cfg_reg(K18_1610_CAM_D4);
466 omap_cfg_reg(K19_1610_CAM_D3);
467 omap_cfg_reg(K15_1610_CAM_D2);
468 omap_cfg_reg(K14_1610_CAM_D1);
469 omap_cfg_reg(L19_1610_CAM_D0);
470 omap_cfg_reg(L18_1610_CAM_VS);
471 omap_cfg_reg(L15_1610_CAM_HS);
472 omap_cfg_reg(M19_1610_CAM_RSTZ);
473 omap_cfg_reg(Y15_1610_CAM_OUTCLK);
474
475 /* serial camera interface */
476 omap_cfg_reg(H19_1610_CAM_EXCLK);
477 omap_cfg_reg(W13_1610_CCP_CLKM);
478 omap_cfg_reg(Y12_1610_CCP_CLKP);
479 /* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
480 /* omap_cfg_reg(Y14_1610_CCP_DATAM); */
481 omap_cfg_reg(W14_1610_CCP_DATAP);
482
483 /* CAM_PWDN */
484 if (gpio_request(11, "cam_pwdn") == 0) {
485 omap_cfg_reg(N20_1610_GPIO11);
486 gpio_direction_output(11, 0);
487 } else
488 pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
489
490
491 /* omap_cfg_reg(P19_1610_GPIO6); */ /* BUSY */
492 gpio_request(6, "ts_busy");
493 gpio_direction_input(6);
494
495 omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */
496 gpio_request(4, "ts_int");
497 gpio_direction_input(4);
498 irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
499
500 mistral_boardinfo[0].irq = gpio_to_irq(4);
501 spi_register_board_info(mistral_boardinfo,
502 ARRAY_SIZE(mistral_boardinfo));
503
504 /* the sideways button (SW1) is for use as a "wakeup" button
505 *
506 * NOTE: The Mistral board has the wakeup button (SW1) wired
507 * to the LCD 3.3V rail, which is powered down during suspend.
508 * To allow this button to wake up the omap, work around this
509 * HW bug by rewiring SW1 to use the main 3.3V rail.
510 */
511 omap_cfg_reg(N15_1610_MPUIO2);
512 if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
513 int ret = 0;
514 int irq = gpio_to_irq(OMAP_MPUIO(2));
515
516 gpio_direction_input(OMAP_MPUIO(2));
517 irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
518#ifdef CONFIG_PM
519 /* share the IRQ in case someone wants to use the
520 * button for more than wakeup from system sleep.
521 */
522 ret = request_irq(irq,
523 &osk_mistral_wake_interrupt,
524 IRQF_SHARED, "mistral_wakeup",
525 &osk_mistral_wake_interrupt);
526 if (ret != 0) {
527 gpio_free(OMAP_MPUIO(2));
528 printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
529 ret);
530 } else
531 enable_irq_wake(irq);
532#endif
533 } else
534 printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
535
536 /* LCD: backlight, and power; power controls other devices on the
537 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
538 */
539 omap_cfg_reg(PWL);
540 if (gpio_request(2, "lcd_pwr") == 0)
541 gpio_direction_output(2, 1);
542
543 /*
544 * GPIO based LEDs
545 */
546 omap_cfg_reg(P18_1610_GPIO3);
547 omap_cfg_reg(MPUIO4);
548
549 i2c_register_board_info(1, mistral_i2c_board_info,
550 ARRAY_SIZE(mistral_i2c_board_info));
551
552 platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
553}
554#else
555static void __init osk_mistral_init(void) { }
556#endif
557
558#define EMIFS_CS3_VAL (0x88013141)
559
560static void __init osk_init(void)
561{
562 u32 l;
563
564 osk_init_smc91x();
565 osk_init_cf();
566
567 /* Workaround for wrong CS3 (NOR flash) timing
568 * There are some U-Boot versions out there which configure
569 * wrong CS3 memory timings. This mainly leads to CRC
570 * or similar errors if you use NOR flash (e.g. with JFFS2)
571 */
572 l = omap_readl(EMIFS_CCS(3));
573 if (l != EMIFS_CS3_VAL)
574 omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
575
576 osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
577 osk_flash_resource.end += SZ_32M - 1;
578 osk5912_smc91x_resources[1].start = gpio_to_irq(0);
579 osk5912_smc91x_resources[1].end = gpio_to_irq(0);
580 osk5912_cf_resources[0].start = gpio_to_irq(62);
581 osk5912_cf_resources[0].end = gpio_to_irq(62);
582 platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
583
584 l = omap_readl(USB_TRANSCEIVER_CTRL);
585 l |= (3 << 1);
586 omap_writel(l, USB_TRANSCEIVER_CTRL);
587
588 omap1_usb_init(&osk_usb_config);
589
590 /* irq for tps65010 chip */
591 /* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */
592 if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
593 gpio_direction_input(OMAP_MPUIO(1));
594
595 omap_serial_init();
596 osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
597 omap_register_i2c_bus(1, 400, osk_i2c_board_info,
598 ARRAY_SIZE(osk_i2c_board_info));
599 osk_mistral_init();
600
601#ifdef CONFIG_OMAP_OSK_MISTRAL
602 omapfb_set_lcd_config(&osk_lcd_config);
603#endif
604
605}
606
607MACHINE_START(OMAP_OSK, "TI-OSK")
608 /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
609 .atag_offset = 0x100,
610 .map_io = omap16xx_map_io,
611 .init_early = omap1_init_early,
612 .init_irq = omap1_init_irq,
613 .init_machine = osk_init,
614 .init_late = omap1_init_late,
615 .init_time = omap1_timer_init,
616 .restart = omap1_restart,
617MACHINE_END
1/*
2 * linux/arch/arm/mach-omap1/board-osk.c
3 *
4 * Board specific init for OMAP5912 OSK
5 *
6 * Written by Dirk Behme <dirk.behme@de.bosch.com>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 *
13 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
14 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
15 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
16 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
19 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
20 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23 *
24 * You should have received a copy of the GNU General Public License along
25 * with this program; if not, write to the Free Software Foundation, Inc.,
26 * 675 Mass Ave, Cambridge, MA 02139, USA.
27 */
28#include <linux/gpio.h>
29#include <linux/gpio/machine.h>
30#include <linux/kernel.h>
31#include <linux/init.h>
32#include <linux/platform_device.h>
33#include <linux/interrupt.h>
34#include <linux/irq.h>
35#include <linux/i2c.h>
36#include <linux/leds.h>
37#include <linux/smc91x.h>
38#include <linux/omapfb.h>
39#include <linux/mtd/mtd.h>
40#include <linux/mtd/partitions.h>
41#include <linux/mtd/physmap.h>
42#include <linux/mfd/tps65010.h>
43#include <linux/platform_data/gpio-omap.h>
44#include <linux/platform_data/omap1_bl.h>
45
46#include <asm/mach-types.h>
47#include <asm/mach/arch.h>
48#include <asm/mach/map.h>
49
50#include "flash.h"
51#include <mach/mux.h>
52#include <mach/tc.h>
53
54#include <mach/hardware.h>
55#include <mach/usb.h>
56
57#include "common.h"
58
59/* Name of the GPIO chip used by the OMAP for GPIOs 0..15 */
60#define OMAP_GPIO_LABEL "gpio-0-15"
61
62/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
63#define OMAP_OSK_ETHR_START 0x04800300
64
65/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with
66 * alternate pin configurations for hardware-controlled blinking.
67 */
68#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
69# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0)
70# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1)
71# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2)
72# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3)
73# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4)
74# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5)
75
76static struct mtd_partition osk_partitions[] = {
77 /* bootloader (U-Boot, etc) in first sector */
78 {
79 .name = "bootloader",
80 .offset = 0,
81 .size = SZ_128K,
82 .mask_flags = MTD_WRITEABLE, /* force read-only */
83 },
84 /* bootloader params in the next sector */
85 {
86 .name = "params",
87 .offset = MTDPART_OFS_APPEND,
88 .size = SZ_128K,
89 .mask_flags = 0,
90 }, {
91 .name = "kernel",
92 .offset = MTDPART_OFS_APPEND,
93 .size = SZ_2M,
94 .mask_flags = 0
95 }, {
96 .name = "filesystem",
97 .offset = MTDPART_OFS_APPEND,
98 .size = MTDPART_SIZ_FULL,
99 .mask_flags = 0
100 }
101};
102
103static struct physmap_flash_data osk_flash_data = {
104 .width = 2,
105 .set_vpp = omap1_set_vpp,
106 .parts = osk_partitions,
107 .nr_parts = ARRAY_SIZE(osk_partitions),
108};
109
110static struct resource osk_flash_resource = {
111 /* this is on CS3, wherever it's mapped */
112 .flags = IORESOURCE_MEM,
113};
114
115static struct platform_device osk5912_flash_device = {
116 .name = "physmap-flash",
117 .id = 0,
118 .dev = {
119 .platform_data = &osk_flash_data,
120 },
121 .num_resources = 1,
122 .resource = &osk_flash_resource,
123};
124
125static struct smc91x_platdata osk5912_smc91x_info = {
126 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
127 .leda = RPC_LED_100_10,
128 .ledb = RPC_LED_TX_RX,
129};
130
131static struct resource osk5912_smc91x_resources[] = {
132 [0] = {
133 .start = OMAP_OSK_ETHR_START, /* Physical */
134 .end = OMAP_OSK_ETHR_START + 0xf,
135 .flags = IORESOURCE_MEM,
136 },
137 [1] = {
138 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
139 },
140};
141
142static struct platform_device osk5912_smc91x_device = {
143 .name = "smc91x",
144 .id = -1,
145 .dev = {
146 .platform_data = &osk5912_smc91x_info,
147 },
148 .num_resources = ARRAY_SIZE(osk5912_smc91x_resources),
149 .resource = osk5912_smc91x_resources,
150};
151
152static struct resource osk5912_cf_resources[] = {
153 [0] = {
154 .flags = IORESOURCE_IRQ,
155 },
156};
157
158static struct platform_device osk5912_cf_device = {
159 .name = "omap_cf",
160 .id = -1,
161 .dev = {
162 .platform_data = (void *) 2 /* CS2 */,
163 },
164 .num_resources = ARRAY_SIZE(osk5912_cf_resources),
165 .resource = osk5912_cf_resources,
166};
167
168static struct platform_device *osk5912_devices[] __initdata = {
169 &osk5912_flash_device,
170 &osk5912_smc91x_device,
171 &osk5912_cf_device,
172};
173
174static const struct gpio_led tps_leds[] = {
175 /* NOTE: D9 and D2 have hardware blink support.
176 * Also, D9 requires non-battery power.
177 */
178 { .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
179 .default_trigger = "disk-activity", },
180 { .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
181 { .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
182 .default_trigger = "heartbeat", },
183};
184
185static struct gpio_led_platform_data tps_leds_data = {
186 .num_leds = 3,
187 .leds = tps_leds,
188};
189
190static struct platform_device osk5912_tps_leds = {
191 .name = "leds-gpio",
192 .id = 0,
193 .dev.platform_data = &tps_leds_data,
194};
195
196static int osk_tps_setup(struct i2c_client *client, void *context)
197{
198 if (!IS_BUILTIN(CONFIG_TPS65010))
199 return -ENOSYS;
200
201 /* Set GPIO 1 HIGH to disable VBUS power supply;
202 * OHCI driver powers it up/down as needed.
203 */
204 gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
205 gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
206
207 /* Set GPIO 2 high so LED D3 is off by default */
208 tps65010_set_gpio_out_value(GPIO2, HIGH);
209
210 /* Set GPIO 3 low to take ethernet out of reset */
211 gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
212 gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);
213
214 /* GPIO4 is VDD_DSP */
215 gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
216 gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
217 /* REVISIT if DSP support isn't configured, power it off ... */
218
219 /* Let LED1 (D9) blink; leds-gpio may override it */
220 tps65010_set_led(LED1, BLINK);
221
222 /* Set LED2 off by default */
223 tps65010_set_led(LED2, OFF);
224
225 /* Enable LOW_PWR handshake */
226 tps65010_set_low_pwr(ON);
227
228 /* Switch VLDO2 to 3.0V for AIC23 */
229 tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
230 | TPS_LDO1_ENABLE);
231
232 /* register these three LEDs */
233 osk5912_tps_leds.dev.parent = &client->dev;
234 platform_device_register(&osk5912_tps_leds);
235
236 return 0;
237}
238
239static struct tps65010_board tps_board = {
240 .base = OSK_TPS_GPIO_BASE,
241 .outmask = 0x0f,
242 .setup = osk_tps_setup,
243};
244
245static struct i2c_board_info __initdata osk_i2c_board_info[] = {
246 {
247 /* This device will get the name "i2c-tps65010" */
248 I2C_BOARD_INFO("tps65010", 0x48),
249 .dev_name = "tps65010",
250 .platform_data = &tps_board,
251
252 },
253 {
254 I2C_BOARD_INFO("tlv320aic23", 0x1B),
255 },
256 /* TODO when driver support is ready:
257 * - optionally on Mistral, ov9640 camera sensor at 0x30
258 */
259};
260
261static void __init osk_init_smc91x(void)
262{
263 u32 l;
264
265 if ((gpio_request(0, "smc_irq")) < 0) {
266 printk("Error requesting gpio 0 for smc91x irq\n");
267 return;
268 }
269
270 /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
271 l = omap_readl(EMIFS_CCS(1));
272 l |= 0x3;
273 omap_writel(l, EMIFS_CCS(1));
274}
275
276static void __init osk_init_cf(void)
277{
278 omap_cfg_reg(M7_1610_GPIO62);
279 if ((gpio_request(62, "cf_irq")) < 0) {
280 printk("Error requesting gpio 62 for CF irq\n");
281 return;
282 }
283 /* the CF I/O IRQ is really active-low */
284 irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
285}
286
287static struct gpiod_lookup_table osk_usb_gpio_table = {
288 .dev_id = "ohci",
289 .table = {
290 /* Power GPIO on the I2C-attached TPS65010 */
291 GPIO_LOOKUP("i2c-tps65010", 1, "power", GPIO_ACTIVE_HIGH),
292 GPIO_LOOKUP(OMAP_GPIO_LABEL, 9, "overcurrent",
293 GPIO_ACTIVE_HIGH),
294 },
295};
296
297static struct omap_usb_config osk_usb_config __initdata = {
298 /* has usb host connector (A) ... for development it can also
299 * be used, with a NONSTANDARD gender-bending cable/dongle, as
300 * a peripheral.
301 */
302#if IS_ENABLED(CONFIG_USB_OMAP)
303 .register_dev = 1,
304 .hmc_mode = 0,
305#else
306 .register_host = 1,
307 .hmc_mode = 16,
308 .rwc = 1,
309#endif
310 .pins[0] = 2,
311};
312
313#ifdef CONFIG_OMAP_OSK_MISTRAL
314static const struct omap_lcd_config osk_lcd_config __initconst = {
315 .ctrl_name = "internal",
316};
317#endif
318
319#ifdef CONFIG_OMAP_OSK_MISTRAL
320
321#include <linux/input.h>
322#include <linux/property.h>
323#include <linux/spi/spi.h>
324#include <linux/spi/ads7846.h>
325
326#include <linux/platform_data/keypad-omap.h>
327
328static const struct property_entry mistral_at24_properties[] = {
329 PROPERTY_ENTRY_U32("pagesize", 16),
330 { }
331};
332
333static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
334 {
335 /* NOTE: powered from LCD supply */
336 I2C_BOARD_INFO("24c04", 0x50),
337 .properties = mistral_at24_properties,
338 },
339 /* TODO when driver support is ready:
340 * - optionally ov9640 camera sensor at 0x30
341 */
342};
343
344static const unsigned int osk_keymap[] = {
345 /* KEY(col, row, code) */
346 KEY(0, 0, KEY_F1), /* SW4 */
347 KEY(3, 0, KEY_UP), /* (sw2/up) */
348 KEY(1, 1, KEY_LEFTCTRL), /* SW5 */
349 KEY(2, 1, KEY_LEFT), /* (sw2/left) */
350 KEY(0, 2, KEY_SPACE), /* SW3 */
351 KEY(1, 2, KEY_ESC), /* SW6 */
352 KEY(2, 2, KEY_DOWN), /* (sw2/down) */
353 KEY(2, 3, KEY_ENTER), /* (sw2/select) */
354 KEY(3, 3, KEY_RIGHT), /* (sw2/right) */
355};
356
357static const struct matrix_keymap_data osk_keymap_data = {
358 .keymap = osk_keymap,
359 .keymap_size = ARRAY_SIZE(osk_keymap),
360};
361
362static struct omap_kp_platform_data osk_kp_data = {
363 .rows = 8,
364 .cols = 8,
365 .keymap_data = &osk_keymap_data,
366 .delay = 9,
367};
368
369static struct resource osk5912_kp_resources[] = {
370 [0] = {
371 .start = INT_KEYBOARD,
372 .end = INT_KEYBOARD,
373 .flags = IORESOURCE_IRQ,
374 },
375};
376
377static struct platform_device osk5912_kp_device = {
378 .name = "omap-keypad",
379 .id = -1,
380 .dev = {
381 .platform_data = &osk_kp_data,
382 },
383 .num_resources = ARRAY_SIZE(osk5912_kp_resources),
384 .resource = osk5912_kp_resources,
385};
386
387static struct omap_backlight_config mistral_bl_data = {
388 .default_intensity = 0xa0,
389};
390
391static struct platform_device mistral_bl_device = {
392 .name = "omap-bl",
393 .id = -1,
394 .dev = {
395 .platform_data = &mistral_bl_data,
396 },
397};
398
399static struct platform_device osk5912_lcd_device = {
400 .name = "lcd_osk",
401 .id = -1,
402};
403
404static const struct gpio_led mistral_gpio_led_pins[] = {
405 {
406 .name = "mistral:red",
407 .default_trigger = "heartbeat",
408 .gpio = 3,
409 },
410 {
411 .name = "mistral:green",
412 .default_trigger = "cpu0",
413 .gpio = OMAP_MPUIO(4),
414 },
415};
416
417static struct gpio_led_platform_data mistral_gpio_led_data = {
418 .leds = mistral_gpio_led_pins,
419 .num_leds = ARRAY_SIZE(mistral_gpio_led_pins),
420};
421
422static struct platform_device mistral_gpio_leds = {
423 .name = "leds-gpio",
424 .id = -1,
425 .dev = {
426 .platform_data = &mistral_gpio_led_data,
427 },
428};
429
430static struct platform_device *mistral_devices[] __initdata = {
431 &osk5912_kp_device,
432 &mistral_bl_device,
433 &osk5912_lcd_device,
434 &mistral_gpio_leds,
435};
436
437static int mistral_get_pendown_state(void)
438{
439 return !gpio_get_value(4);
440}
441
442static const struct ads7846_platform_data mistral_ts_info = {
443 .model = 7846,
444 .vref_delay_usecs = 100, /* internal, no capacitor */
445 .x_plate_ohms = 419,
446 .y_plate_ohms = 486,
447 .get_pendown_state = mistral_get_pendown_state,
448};
449
450static struct spi_board_info __initdata mistral_boardinfo[] = { {
451 /* MicroWire (bus 2) CS0 has an ads7846e */
452 .modalias = "ads7846",
453 .platform_data = &mistral_ts_info,
454 .max_speed_hz = 120000 /* max sample rate at 3V */
455 * 26 /* command + data + overhead */,
456 .bus_num = 2,
457 .chip_select = 0,
458} };
459
460static irqreturn_t
461osk_mistral_wake_interrupt(int irq, void *ignored)
462{
463 return IRQ_HANDLED;
464}
465
466static void __init osk_mistral_init(void)
467{
468 /* NOTE: we could actually tell if there's a Mistral board
469 * attached, e.g. by trying to read something from the ads7846.
470 * But this arch_init() code is too early for that, since we
471 * can't talk to the ads or even the i2c eeprom.
472 */
473
474 /* parallel camera interface */
475 omap_cfg_reg(J15_1610_CAM_LCLK);
476 omap_cfg_reg(J18_1610_CAM_D7);
477 omap_cfg_reg(J19_1610_CAM_D6);
478 omap_cfg_reg(J14_1610_CAM_D5);
479 omap_cfg_reg(K18_1610_CAM_D4);
480 omap_cfg_reg(K19_1610_CAM_D3);
481 omap_cfg_reg(K15_1610_CAM_D2);
482 omap_cfg_reg(K14_1610_CAM_D1);
483 omap_cfg_reg(L19_1610_CAM_D0);
484 omap_cfg_reg(L18_1610_CAM_VS);
485 omap_cfg_reg(L15_1610_CAM_HS);
486 omap_cfg_reg(M19_1610_CAM_RSTZ);
487 omap_cfg_reg(Y15_1610_CAM_OUTCLK);
488
489 /* serial camera interface */
490 omap_cfg_reg(H19_1610_CAM_EXCLK);
491 omap_cfg_reg(W13_1610_CCP_CLKM);
492 omap_cfg_reg(Y12_1610_CCP_CLKP);
493 /* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
494 /* omap_cfg_reg(Y14_1610_CCP_DATAM); */
495 omap_cfg_reg(W14_1610_CCP_DATAP);
496
497 /* CAM_PWDN */
498 if (gpio_request(11, "cam_pwdn") == 0) {
499 omap_cfg_reg(N20_1610_GPIO11);
500 gpio_direction_output(11, 0);
501 } else
502 pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
503
504
505 /* omap_cfg_reg(P19_1610_GPIO6); */ /* BUSY */
506 gpio_request(6, "ts_busy");
507 gpio_direction_input(6);
508
509 omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */
510 gpio_request(4, "ts_int");
511 gpio_direction_input(4);
512 irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
513
514 mistral_boardinfo[0].irq = gpio_to_irq(4);
515 spi_register_board_info(mistral_boardinfo,
516 ARRAY_SIZE(mistral_boardinfo));
517
518 /* the sideways button (SW1) is for use as a "wakeup" button
519 *
520 * NOTE: The Mistral board has the wakeup button (SW1) wired
521 * to the LCD 3.3V rail, which is powered down during suspend.
522 * To allow this button to wake up the omap, work around this
523 * HW bug by rewiring SW1 to use the main 3.3V rail.
524 */
525 omap_cfg_reg(N15_1610_MPUIO2);
526 if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
527 int ret = 0;
528 int irq = gpio_to_irq(OMAP_MPUIO(2));
529
530 gpio_direction_input(OMAP_MPUIO(2));
531 irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
532 /* share the IRQ in case someone wants to use the
533 * button for more than wakeup from system sleep.
534 */
535 ret = request_irq(irq,
536 &osk_mistral_wake_interrupt,
537 IRQF_SHARED, "mistral_wakeup",
538 &osk_mistral_wake_interrupt);
539 if (ret != 0) {
540 gpio_free(OMAP_MPUIO(2));
541 printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
542 ret);
543 } else
544 enable_irq_wake(irq);
545 } else
546 printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
547
548 /* LCD: backlight, and power; power controls other devices on the
549 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
550 */
551 omap_cfg_reg(PWL);
552 if (gpio_request(2, "lcd_pwr") == 0)
553 gpio_direction_output(2, 1);
554
555 /*
556 * GPIO based LEDs
557 */
558 omap_cfg_reg(P18_1610_GPIO3);
559 omap_cfg_reg(MPUIO4);
560
561 i2c_register_board_info(1, mistral_i2c_board_info,
562 ARRAY_SIZE(mistral_i2c_board_info));
563
564 platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
565}
566#else
567static void __init osk_mistral_init(void) { }
568#endif
569
570#define EMIFS_CS3_VAL (0x88013141)
571
572static void __init osk_init(void)
573{
574 u32 l;
575
576 osk_init_smc91x();
577 osk_init_cf();
578
579 /* Workaround for wrong CS3 (NOR flash) timing
580 * There are some U-Boot versions out there which configure
581 * wrong CS3 memory timings. This mainly leads to CRC
582 * or similar errors if you use NOR flash (e.g. with JFFS2)
583 */
584 l = omap_readl(EMIFS_CCS(3));
585 if (l != EMIFS_CS3_VAL)
586 omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
587
588 osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
589 osk_flash_resource.end += SZ_32M - 1;
590 osk5912_smc91x_resources[1].start = gpio_to_irq(0);
591 osk5912_smc91x_resources[1].end = gpio_to_irq(0);
592 osk5912_cf_resources[0].start = gpio_to_irq(62);
593 osk5912_cf_resources[0].end = gpio_to_irq(62);
594 platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
595
596 l = omap_readl(USB_TRANSCEIVER_CTRL);
597 l |= (3 << 1);
598 omap_writel(l, USB_TRANSCEIVER_CTRL);
599
600 gpiod_add_lookup_table(&osk_usb_gpio_table);
601 omap1_usb_init(&osk_usb_config);
602
603 /* irq for tps65010 chip */
604 /* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */
605 if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
606 gpio_direction_input(OMAP_MPUIO(1));
607
608 omap_serial_init();
609 osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
610 omap_register_i2c_bus(1, 400, osk_i2c_board_info,
611 ARRAY_SIZE(osk_i2c_board_info));
612 osk_mistral_init();
613
614#ifdef CONFIG_OMAP_OSK_MISTRAL
615 omapfb_set_lcd_config(&osk_lcd_config);
616#endif
617
618}
619
620MACHINE_START(OMAP_OSK, "TI-OSK")
621 /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
622 .atag_offset = 0x100,
623 .map_io = omap16xx_map_io,
624 .init_early = omap1_init_early,
625 .init_irq = omap1_init_irq,
626 .handle_irq = omap1_handle_irq,
627 .init_machine = osk_init,
628 .init_late = omap1_init_late,
629 .init_time = omap1_timer_init,
630 .restart = omap1_restart,
631MACHINE_END