Loading...
1/*
2 * host.c - ChipIdea USB host controller driver
3 *
4 * Copyright (c) 2012 Intel Corporation
5 *
6 * Author: Alexander Shishkin
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21
22#include <linux/kernel.h>
23#include <linux/io.h>
24#include <linux/usb.h>
25#include <linux/usb/hcd.h>
26#include <linux/usb/chipidea.h>
27#include <linux/regulator/consumer.h>
28
29#include "../host/ehci.h"
30
31#include "ci.h"
32#include "bits.h"
33#include "host.h"
34
35static struct hc_driver __read_mostly ci_ehci_hc_driver;
36
37static irqreturn_t host_irq(struct ci_hdrc *ci)
38{
39 return usb_hcd_irq(ci->irq, ci->hcd);
40}
41
42static int host_start(struct ci_hdrc *ci)
43{
44 struct usb_hcd *hcd;
45 struct ehci_hcd *ehci;
46 int ret;
47
48 if (usb_disabled())
49 return -ENODEV;
50
51 hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev));
52 if (!hcd)
53 return -ENOMEM;
54
55 dev_set_drvdata(ci->dev, ci);
56 hcd->rsrc_start = ci->hw_bank.phys;
57 hcd->rsrc_len = ci->hw_bank.size;
58 hcd->regs = ci->hw_bank.abs;
59 hcd->has_tt = 1;
60
61 hcd->power_budget = ci->platdata->power_budget;
62 hcd->phy = ci->transceiver;
63
64 ehci = hcd_to_ehci(hcd);
65 ehci->caps = ci->hw_bank.cap;
66 ehci->has_hostpc = ci->hw_bank.lpm;
67 ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
68 ehci->imx28_write_fix = ci->imx28_write_fix;
69
70 if (ci->platdata->reg_vbus) {
71 ret = regulator_enable(ci->platdata->reg_vbus);
72 if (ret) {
73 dev_err(ci->dev,
74 "Failed to enable vbus regulator, ret=%d\n",
75 ret);
76 goto put_hcd;
77 }
78 }
79
80 ret = usb_add_hcd(hcd, 0, 0);
81 if (ret)
82 goto disable_reg;
83 else
84 ci->hcd = hcd;
85
86 if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
87 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
88
89 return ret;
90
91disable_reg:
92 if (ci->platdata->reg_vbus)
93 regulator_disable(ci->platdata->reg_vbus);
94
95put_hcd:
96 usb_put_hcd(hcd);
97
98 return ret;
99}
100
101static void host_stop(struct ci_hdrc *ci)
102{
103 struct usb_hcd *hcd = ci->hcd;
104
105 if (hcd) {
106 usb_remove_hcd(hcd);
107 usb_put_hcd(hcd);
108 if (ci->platdata->reg_vbus)
109 regulator_disable(ci->platdata->reg_vbus);
110 }
111}
112
113
114void ci_hdrc_host_destroy(struct ci_hdrc *ci)
115{
116 if (ci->role == CI_ROLE_HOST && ci->hcd)
117 host_stop(ci);
118}
119
120int ci_hdrc_host_init(struct ci_hdrc *ci)
121{
122 struct ci_role_driver *rdrv;
123
124 if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC))
125 return -ENXIO;
126
127 rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
128 if (!rdrv)
129 return -ENOMEM;
130
131 rdrv->start = host_start;
132 rdrv->stop = host_stop;
133 rdrv->irq = host_irq;
134 rdrv->name = "host";
135 ci->roles[CI_ROLE_HOST] = rdrv;
136
137 ehci_init_driver(&ci_ehci_hc_driver, NULL);
138
139 return 0;
140}
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * host.c - ChipIdea USB host controller driver
4 *
5 * Copyright (c) 2012 Intel Corporation
6 *
7 * Author: Alexander Shishkin
8 */
9
10#include <linux/kernel.h>
11#include <linux/io.h>
12#include <linux/usb.h>
13#include <linux/usb/hcd.h>
14#include <linux/usb/chipidea.h>
15#include <linux/regulator/consumer.h>
16#include <linux/pinctrl/consumer.h>
17
18#include "../host/ehci.h"
19
20#include "ci.h"
21#include "bits.h"
22#include "host.h"
23
24static struct hc_driver __read_mostly ci_ehci_hc_driver;
25static int (*orig_bus_suspend)(struct usb_hcd *hcd);
26
27struct ehci_ci_priv {
28 struct regulator *reg_vbus;
29};
30
31static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
32{
33 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
34 struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
35 struct device *dev = hcd->self.controller;
36 struct ci_hdrc *ci = dev_get_drvdata(dev);
37 int ret = 0;
38 int port = HCS_N_PORTS(ehci->hcs_params);
39
40 if (priv->reg_vbus) {
41 if (port > 1) {
42 dev_warn(dev,
43 "Not support multi-port regulator control\n");
44 return 0;
45 }
46 if (enable)
47 ret = regulator_enable(priv->reg_vbus);
48 else
49 ret = regulator_disable(priv->reg_vbus);
50 if (ret) {
51 dev_err(dev,
52 "Failed to %s vbus regulator, ret=%d\n",
53 enable ? "enable" : "disable", ret);
54 return ret;
55 }
56 }
57
58 if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
59 /*
60 * Marvell 28nm HSIC PHY requires forcing the port to HS mode.
61 * As HSIC is always HS, this should be safe for others.
62 */
63 hw_port_test_set(ci, 5);
64 hw_port_test_set(ci, 0);
65 }
66 return 0;
67};
68
69static int ehci_ci_reset(struct usb_hcd *hcd)
70{
71 struct device *dev = hcd->self.controller;
72 struct ci_hdrc *ci = dev_get_drvdata(dev);
73 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
74 int ret;
75
76 ret = ehci_setup(hcd);
77 if (ret)
78 return ret;
79
80 ehci->need_io_watchdog = 0;
81
82 if (ci->platdata->notify_event) {
83 ret = ci->platdata->notify_event(ci,
84 CI_HDRC_CONTROLLER_RESET_EVENT);
85 if (ret)
86 return ret;
87 }
88
89 ci_platform_configure(ci);
90
91 return ret;
92}
93
94static const struct ehci_driver_overrides ehci_ci_overrides = {
95 .extra_priv_size = sizeof(struct ehci_ci_priv),
96 .port_power = ehci_ci_portpower,
97 .reset = ehci_ci_reset,
98};
99
100static irqreturn_t host_irq(struct ci_hdrc *ci)
101{
102 return usb_hcd_irq(ci->irq, ci->hcd);
103}
104
105static int host_start(struct ci_hdrc *ci)
106{
107 struct usb_hcd *hcd;
108 struct ehci_hcd *ehci;
109 struct ehci_ci_priv *priv;
110 int ret;
111
112 if (usb_disabled())
113 return -ENODEV;
114
115 hcd = __usb_create_hcd(&ci_ehci_hc_driver, ci->dev->parent,
116 ci->dev, dev_name(ci->dev), NULL);
117 if (!hcd)
118 return -ENOMEM;
119
120 dev_set_drvdata(ci->dev, ci);
121 hcd->rsrc_start = ci->hw_bank.phys;
122 hcd->rsrc_len = ci->hw_bank.size;
123 hcd->regs = ci->hw_bank.abs;
124 hcd->has_tt = 1;
125
126 hcd->power_budget = ci->platdata->power_budget;
127 hcd->tpl_support = ci->platdata->tpl_support;
128 if (ci->phy || ci->usb_phy) {
129 hcd->skip_phy_initialization = 1;
130 if (ci->usb_phy)
131 hcd->usb_phy = ci->usb_phy;
132 }
133
134 ehci = hcd_to_ehci(hcd);
135 ehci->caps = ci->hw_bank.cap;
136 ehci->has_hostpc = ci->hw_bank.lpm;
137 ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
138 ehci->imx28_write_fix = ci->imx28_write_fix;
139
140 priv = (struct ehci_ci_priv *)ehci->priv;
141 priv->reg_vbus = NULL;
142
143 if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
144 if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) {
145 ret = regulator_enable(ci->platdata->reg_vbus);
146 if (ret) {
147 dev_err(ci->dev,
148 "Failed to enable vbus regulator, ret=%d\n",
149 ret);
150 goto put_hcd;
151 }
152 } else {
153 priv->reg_vbus = ci->platdata->reg_vbus;
154 }
155 }
156
157 if (ci->platdata->pins_host)
158 pinctrl_select_state(ci->platdata->pctl,
159 ci->platdata->pins_host);
160
161 ret = usb_add_hcd(hcd, 0, 0);
162 if (ret) {
163 goto disable_reg;
164 } else {
165 struct usb_otg *otg = &ci->otg;
166
167 ci->hcd = hcd;
168
169 if (ci_otg_is_fsm_mode(ci)) {
170 otg->host = &hcd->self;
171 hcd->self.otg_port = 1;
172 }
173
174 if (ci->platdata->notify_event &&
175 (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC))
176 ci->platdata->notify_event
177 (ci, CI_HDRC_IMX_HSIC_ACTIVE_EVENT);
178 }
179
180 return ret;
181
182disable_reg:
183 if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
184 (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
185 regulator_disable(ci->platdata->reg_vbus);
186put_hcd:
187 usb_put_hcd(hcd);
188
189 return ret;
190}
191
192static void host_stop(struct ci_hdrc *ci)
193{
194 struct usb_hcd *hcd = ci->hcd;
195
196 if (hcd) {
197 if (ci->platdata->notify_event)
198 ci->platdata->notify_event(ci,
199 CI_HDRC_CONTROLLER_STOPPED_EVENT);
200 usb_remove_hcd(hcd);
201 ci->role = CI_ROLE_END;
202 synchronize_irq(ci->irq);
203 usb_put_hcd(hcd);
204 if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
205 (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
206 regulator_disable(ci->platdata->reg_vbus);
207 }
208 ci->hcd = NULL;
209 ci->otg.host = NULL;
210
211 if (ci->platdata->pins_host && ci->platdata->pins_default)
212 pinctrl_select_state(ci->platdata->pctl,
213 ci->platdata->pins_default);
214}
215
216
217void ci_hdrc_host_destroy(struct ci_hdrc *ci)
218{
219 if (ci->role == CI_ROLE_HOST && ci->hcd)
220 host_stop(ci);
221}
222
223/* The below code is based on tegra ehci driver */
224static int ci_ehci_hub_control(
225 struct usb_hcd *hcd,
226 u16 typeReq,
227 u16 wValue,
228 u16 wIndex,
229 char *buf,
230 u16 wLength
231)
232{
233 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
234 u32 __iomem *status_reg;
235 u32 temp;
236 unsigned long flags;
237 int retval = 0;
238 struct device *dev = hcd->self.controller;
239 struct ci_hdrc *ci = dev_get_drvdata(dev);
240
241 status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
242
243 spin_lock_irqsave(&ehci->lock, flags);
244
245 if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
246 temp = ehci_readl(ehci, status_reg);
247 if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
248 retval = -EPIPE;
249 goto done;
250 }
251
252 temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E);
253 temp |= PORT_WKDISC_E | PORT_WKOC_E;
254 ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
255
256 /*
257 * If a transaction is in progress, there may be a delay in
258 * suspending the port. Poll until the port is suspended.
259 */
260 if (ehci_handshake(ehci, status_reg, PORT_SUSPEND,
261 PORT_SUSPEND, 5000))
262 ehci_err(ehci, "timeout waiting for SUSPEND\n");
263
264 if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) {
265 if (ci->platdata->notify_event)
266 ci->platdata->notify_event(ci,
267 CI_HDRC_IMX_HSIC_SUSPEND_EVENT);
268
269 temp = ehci_readl(ehci, status_reg);
270 temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E);
271 ehci_writel(ehci, temp, status_reg);
272 }
273
274 set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
275 goto done;
276 }
277
278 /*
279 * After resume has finished, it needs do some post resume
280 * operation for some SoCs.
281 */
282 else if (typeReq == ClearPortFeature &&
283 wValue == USB_PORT_FEAT_C_SUSPEND) {
284 /* Make sure the resume has finished, it should be finished */
285 if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 25000))
286 ehci_err(ehci, "timeout waiting for resume\n");
287 }
288
289 spin_unlock_irqrestore(&ehci->lock, flags);
290
291 /* Handle the hub control events here */
292 return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
293done:
294 spin_unlock_irqrestore(&ehci->lock, flags);
295 return retval;
296}
297static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
298{
299 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
300 struct device *dev = hcd->self.controller;
301 struct ci_hdrc *ci = dev_get_drvdata(dev);
302 int port;
303 u32 tmp;
304
305 int ret = orig_bus_suspend(hcd);
306
307 if (ret)
308 return ret;
309
310 port = HCS_N_PORTS(ehci->hcs_params);
311 while (port--) {
312 u32 __iomem *reg = &ehci->regs->port_status[port];
313 u32 portsc = ehci_readl(ehci, reg);
314
315 if (portsc & PORT_CONNECT) {
316 /*
317 * For chipidea, the resume signal will be ended
318 * automatically, so for remote wakeup case, the
319 * usbcmd.rs may not be set before the resume has
320 * ended if other resume paths consumes too much
321 * time (~24ms), in that case, the SOF will not
322 * send out within 3ms after resume ends, then the
323 * high speed device will enter full speed mode.
324 */
325
326 tmp = ehci_readl(ehci, &ehci->regs->command);
327 tmp |= CMD_RUN;
328 ehci_writel(ehci, tmp, &ehci->regs->command);
329 /*
330 * It needs a short delay between set RS bit and PHCD.
331 */
332 usleep_range(150, 200);
333 /*
334 * Need to clear WKCN and WKOC for imx HSIC,
335 * otherwise, there will be wakeup event.
336 */
337 if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) {
338 tmp = ehci_readl(ehci, reg);
339 tmp &= ~(PORT_WKDISC_E | PORT_WKCONN_E);
340 ehci_writel(ehci, tmp, reg);
341 }
342
343 break;
344 }
345 }
346
347 return 0;
348}
349
350int ci_hdrc_host_init(struct ci_hdrc *ci)
351{
352 struct ci_role_driver *rdrv;
353
354 if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC))
355 return -ENXIO;
356
357 rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
358 if (!rdrv)
359 return -ENOMEM;
360
361 rdrv->start = host_start;
362 rdrv->stop = host_stop;
363 rdrv->irq = host_irq;
364 rdrv->name = "host";
365 ci->roles[CI_ROLE_HOST] = rdrv;
366
367 return 0;
368}
369
370void ci_hdrc_host_driver_init(void)
371{
372 ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
373 orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
374 ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
375 ci_ehci_hc_driver.hub_control = ci_ehci_hub_control;
376}