Loading...
1/*
2 * Copyright (C) 2005 Marc Kleine-Budde, Pengutronix
3 * Copyright (C) 2006 Andrey Volkov, Varma Electronics
4 * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the version 2 of the GNU General Public License
8 * as published by the Free Software Foundation
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, see <http://www.gnu.org/licenses/>.
17 */
18
19#include <linux/module.h>
20#include <linux/kernel.h>
21#include <linux/slab.h>
22#include <linux/netdevice.h>
23#include <linux/if_arp.h>
24#include <linux/can.h>
25#include <linux/can/dev.h>
26#include <linux/can/skb.h>
27#include <linux/can/netlink.h>
28#include <linux/can/led.h>
29#include <net/rtnetlink.h>
30
31#define MOD_DESC "CAN device driver interface"
32
33MODULE_DESCRIPTION(MOD_DESC);
34MODULE_LICENSE("GPL v2");
35MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
36
37/* CAN DLC to real data length conversion helpers */
38
39static const u8 dlc2len[] = {0, 1, 2, 3, 4, 5, 6, 7,
40 8, 12, 16, 20, 24, 32, 48, 64};
41
42/* get data length from can_dlc with sanitized can_dlc */
43u8 can_dlc2len(u8 can_dlc)
44{
45 return dlc2len[can_dlc & 0x0F];
46}
47EXPORT_SYMBOL_GPL(can_dlc2len);
48
49static const u8 len2dlc[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, /* 0 - 8 */
50 9, 9, 9, 9, /* 9 - 12 */
51 10, 10, 10, 10, /* 13 - 16 */
52 11, 11, 11, 11, /* 17 - 20 */
53 12, 12, 12, 12, /* 21 - 24 */
54 13, 13, 13, 13, 13, 13, 13, 13, /* 25 - 32 */
55 14, 14, 14, 14, 14, 14, 14, 14, /* 33 - 40 */
56 14, 14, 14, 14, 14, 14, 14, 14, /* 41 - 48 */
57 15, 15, 15, 15, 15, 15, 15, 15, /* 49 - 56 */
58 15, 15, 15, 15, 15, 15, 15, 15}; /* 57 - 64 */
59
60/* map the sanitized data length to an appropriate data length code */
61u8 can_len2dlc(u8 len)
62{
63 if (unlikely(len > 64))
64 return 0xF;
65
66 return len2dlc[len];
67}
68EXPORT_SYMBOL_GPL(can_len2dlc);
69
70#ifdef CONFIG_CAN_CALC_BITTIMING
71#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */
72
73/*
74 * Bit-timing calculation derived from:
75 *
76 * Code based on LinCAN sources and H8S2638 project
77 * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz
78 * Copyright 2005 Stanislav Marek
79 * email: pisa@cmp.felk.cvut.cz
80 *
81 * Calculates proper bit-timing parameters for a specified bit-rate
82 * and sample-point, which can then be used to set the bit-timing
83 * registers of the CAN controller. You can find more information
84 * in the header file linux/can/netlink.h.
85 */
86static int can_update_spt(const struct can_bittiming_const *btc,
87 int sampl_pt, int tseg, int *tseg1, int *tseg2)
88{
89 *tseg2 = tseg + 1 - (sampl_pt * (tseg + 1)) / 1000;
90 if (*tseg2 < btc->tseg2_min)
91 *tseg2 = btc->tseg2_min;
92 if (*tseg2 > btc->tseg2_max)
93 *tseg2 = btc->tseg2_max;
94 *tseg1 = tseg - *tseg2;
95 if (*tseg1 > btc->tseg1_max) {
96 *tseg1 = btc->tseg1_max;
97 *tseg2 = tseg - *tseg1;
98 }
99 return 1000 * (tseg + 1 - *tseg2) / (tseg + 1);
100}
101
102static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
103 const struct can_bittiming_const *btc)
104{
105 struct can_priv *priv = netdev_priv(dev);
106 long rate, best_rate = 0;
107 long best_error = 1000000000, error = 0;
108 int best_tseg = 0, best_brp = 0, brp = 0;
109 int tsegall, tseg = 0, tseg1 = 0, tseg2 = 0;
110 int spt_error = 1000, spt = 0, sampl_pt;
111 u64 v64;
112
113 /* Use CIA recommended sample points */
114 if (bt->sample_point) {
115 sampl_pt = bt->sample_point;
116 } else {
117 if (bt->bitrate > 800000)
118 sampl_pt = 750;
119 else if (bt->bitrate > 500000)
120 sampl_pt = 800;
121 else
122 sampl_pt = 875;
123 }
124
125 /* tseg even = round down, odd = round up */
126 for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1;
127 tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) {
128 tsegall = 1 + tseg / 2;
129 /* Compute all possible tseg choices (tseg=tseg1+tseg2) */
130 brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2;
131 /* chose brp step which is possible in system */
132 brp = (brp / btc->brp_inc) * btc->brp_inc;
133 if ((brp < btc->brp_min) || (brp > btc->brp_max))
134 continue;
135 rate = priv->clock.freq / (brp * tsegall);
136 error = bt->bitrate - rate;
137 /* tseg brp biterror */
138 if (error < 0)
139 error = -error;
140 if (error > best_error)
141 continue;
142 best_error = error;
143 if (error == 0) {
144 spt = can_update_spt(btc, sampl_pt, tseg / 2,
145 &tseg1, &tseg2);
146 error = sampl_pt - spt;
147 if (error < 0)
148 error = -error;
149 if (error > spt_error)
150 continue;
151 spt_error = error;
152 }
153 best_tseg = tseg / 2;
154 best_brp = brp;
155 best_rate = rate;
156 if (error == 0)
157 break;
158 }
159
160 if (best_error) {
161 /* Error in one-tenth of a percent */
162 error = (best_error * 1000) / bt->bitrate;
163 if (error > CAN_CALC_MAX_ERROR) {
164 netdev_err(dev,
165 "bitrate error %ld.%ld%% too high\n",
166 error / 10, error % 10);
167 return -EDOM;
168 } else {
169 netdev_warn(dev, "bitrate error %ld.%ld%%\n",
170 error / 10, error % 10);
171 }
172 }
173
174 /* real sample point */
175 bt->sample_point = can_update_spt(btc, sampl_pt, best_tseg,
176 &tseg1, &tseg2);
177
178 v64 = (u64)best_brp * 1000000000UL;
179 do_div(v64, priv->clock.freq);
180 bt->tq = (u32)v64;
181 bt->prop_seg = tseg1 / 2;
182 bt->phase_seg1 = tseg1 - bt->prop_seg;
183 bt->phase_seg2 = tseg2;
184
185 /* check for sjw user settings */
186 if (!bt->sjw || !btc->sjw_max)
187 bt->sjw = 1;
188 else {
189 /* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */
190 if (bt->sjw > btc->sjw_max)
191 bt->sjw = btc->sjw_max;
192 /* bt->sjw must not be higher than tseg2 */
193 if (tseg2 < bt->sjw)
194 bt->sjw = tseg2;
195 }
196
197 bt->brp = best_brp;
198 /* real bit-rate */
199 bt->bitrate = priv->clock.freq / (bt->brp * (tseg1 + tseg2 + 1));
200
201 return 0;
202}
203#else /* !CONFIG_CAN_CALC_BITTIMING */
204static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
205 const struct can_bittiming_const *btc)
206{
207 netdev_err(dev, "bit-timing calculation not available\n");
208 return -EINVAL;
209}
210#endif /* CONFIG_CAN_CALC_BITTIMING */
211
212/*
213 * Checks the validity of the specified bit-timing parameters prop_seg,
214 * phase_seg1, phase_seg2 and sjw and tries to determine the bitrate
215 * prescaler value brp. You can find more information in the header
216 * file linux/can/netlink.h.
217 */
218static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt,
219 const struct can_bittiming_const *btc)
220{
221 struct can_priv *priv = netdev_priv(dev);
222 int tseg1, alltseg;
223 u64 brp64;
224
225 tseg1 = bt->prop_seg + bt->phase_seg1;
226 if (!bt->sjw)
227 bt->sjw = 1;
228 if (bt->sjw > btc->sjw_max ||
229 tseg1 < btc->tseg1_min || tseg1 > btc->tseg1_max ||
230 bt->phase_seg2 < btc->tseg2_min || bt->phase_seg2 > btc->tseg2_max)
231 return -ERANGE;
232
233 brp64 = (u64)priv->clock.freq * (u64)bt->tq;
234 if (btc->brp_inc > 1)
235 do_div(brp64, btc->brp_inc);
236 brp64 += 500000000UL - 1;
237 do_div(brp64, 1000000000UL); /* the practicable BRP */
238 if (btc->brp_inc > 1)
239 brp64 *= btc->brp_inc;
240 bt->brp = (u32)brp64;
241
242 if (bt->brp < btc->brp_min || bt->brp > btc->brp_max)
243 return -EINVAL;
244
245 alltseg = bt->prop_seg + bt->phase_seg1 + bt->phase_seg2 + 1;
246 bt->bitrate = priv->clock.freq / (bt->brp * alltseg);
247 bt->sample_point = ((tseg1 + 1) * 1000) / alltseg;
248
249 return 0;
250}
251
252static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt,
253 const struct can_bittiming_const *btc)
254{
255 int err;
256
257 /* Check if the CAN device has bit-timing parameters */
258 if (!btc)
259 return -EOPNOTSUPP;
260
261 /*
262 * Depending on the given can_bittiming parameter structure the CAN
263 * timing parameters are calculated based on the provided bitrate OR
264 * alternatively the CAN timing parameters (tq, prop_seg, etc.) are
265 * provided directly which are then checked and fixed up.
266 */
267 if (!bt->tq && bt->bitrate)
268 err = can_calc_bittiming(dev, bt, btc);
269 else if (bt->tq && !bt->bitrate)
270 err = can_fixup_bittiming(dev, bt, btc);
271 else
272 err = -EINVAL;
273
274 return err;
275}
276
277/*
278 * Local echo of CAN messages
279 *
280 * CAN network devices *should* support a local echo functionality
281 * (see Documentation/networking/can.txt). To test the handling of CAN
282 * interfaces that do not support the local echo both driver types are
283 * implemented. In the case that the driver does not support the echo
284 * the IFF_ECHO remains clear in dev->flags. This causes the PF_CAN core
285 * to perform the echo as a fallback solution.
286 */
287static void can_flush_echo_skb(struct net_device *dev)
288{
289 struct can_priv *priv = netdev_priv(dev);
290 struct net_device_stats *stats = &dev->stats;
291 int i;
292
293 for (i = 0; i < priv->echo_skb_max; i++) {
294 if (priv->echo_skb[i]) {
295 kfree_skb(priv->echo_skb[i]);
296 priv->echo_skb[i] = NULL;
297 stats->tx_dropped++;
298 stats->tx_aborted_errors++;
299 }
300 }
301}
302
303/*
304 * Put the skb on the stack to be looped backed locally lateron
305 *
306 * The function is typically called in the start_xmit function
307 * of the device driver. The driver must protect access to
308 * priv->echo_skb, if necessary.
309 */
310void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
311 unsigned int idx)
312{
313 struct can_priv *priv = netdev_priv(dev);
314
315 BUG_ON(idx >= priv->echo_skb_max);
316
317 /* check flag whether this packet has to be looped back */
318 if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK ||
319 (skb->protocol != htons(ETH_P_CAN) &&
320 skb->protocol != htons(ETH_P_CANFD))) {
321 kfree_skb(skb);
322 return;
323 }
324
325 if (!priv->echo_skb[idx]) {
326
327 skb = can_create_echo_skb(skb);
328 if (!skb)
329 return;
330
331 /* make settings for echo to reduce code in irq context */
332 skb->pkt_type = PACKET_BROADCAST;
333 skb->ip_summed = CHECKSUM_UNNECESSARY;
334 skb->dev = dev;
335
336 /* save this skb for tx interrupt echo handling */
337 priv->echo_skb[idx] = skb;
338 } else {
339 /* locking problem with netif_stop_queue() ?? */
340 netdev_err(dev, "%s: BUG! echo_skb is occupied!\n", __func__);
341 kfree_skb(skb);
342 }
343}
344EXPORT_SYMBOL_GPL(can_put_echo_skb);
345
346/*
347 * Get the skb from the stack and loop it back locally
348 *
349 * The function is typically called when the TX done interrupt
350 * is handled in the device driver. The driver must protect
351 * access to priv->echo_skb, if necessary.
352 */
353unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx)
354{
355 struct can_priv *priv = netdev_priv(dev);
356
357 BUG_ON(idx >= priv->echo_skb_max);
358
359 if (priv->echo_skb[idx]) {
360 struct sk_buff *skb = priv->echo_skb[idx];
361 struct can_frame *cf = (struct can_frame *)skb->data;
362 u8 dlc = cf->can_dlc;
363
364 netif_rx(priv->echo_skb[idx]);
365 priv->echo_skb[idx] = NULL;
366
367 return dlc;
368 }
369
370 return 0;
371}
372EXPORT_SYMBOL_GPL(can_get_echo_skb);
373
374/*
375 * Remove the skb from the stack and free it.
376 *
377 * The function is typically called when TX failed.
378 */
379void can_free_echo_skb(struct net_device *dev, unsigned int idx)
380{
381 struct can_priv *priv = netdev_priv(dev);
382
383 BUG_ON(idx >= priv->echo_skb_max);
384
385 if (priv->echo_skb[idx]) {
386 kfree_skb(priv->echo_skb[idx]);
387 priv->echo_skb[idx] = NULL;
388 }
389}
390EXPORT_SYMBOL_GPL(can_free_echo_skb);
391
392/*
393 * CAN device restart for bus-off recovery
394 */
395static void can_restart(unsigned long data)
396{
397 struct net_device *dev = (struct net_device *)data;
398 struct can_priv *priv = netdev_priv(dev);
399 struct net_device_stats *stats = &dev->stats;
400 struct sk_buff *skb;
401 struct can_frame *cf;
402 int err;
403
404 BUG_ON(netif_carrier_ok(dev));
405
406 /*
407 * No synchronization needed because the device is bus-off and
408 * no messages can come in or go out.
409 */
410 can_flush_echo_skb(dev);
411
412 /* send restart message upstream */
413 skb = alloc_can_err_skb(dev, &cf);
414 if (skb == NULL) {
415 err = -ENOMEM;
416 goto restart;
417 }
418 cf->can_id |= CAN_ERR_RESTARTED;
419
420 netif_rx(skb);
421
422 stats->rx_packets++;
423 stats->rx_bytes += cf->can_dlc;
424
425restart:
426 netdev_dbg(dev, "restarted\n");
427 priv->can_stats.restarts++;
428
429 /* Now restart the device */
430 err = priv->do_set_mode(dev, CAN_MODE_START);
431
432 netif_carrier_on(dev);
433 if (err)
434 netdev_err(dev, "Error %d during restart", err);
435}
436
437int can_restart_now(struct net_device *dev)
438{
439 struct can_priv *priv = netdev_priv(dev);
440
441 /*
442 * A manual restart is only permitted if automatic restart is
443 * disabled and the device is in the bus-off state
444 */
445 if (priv->restart_ms)
446 return -EINVAL;
447 if (priv->state != CAN_STATE_BUS_OFF)
448 return -EBUSY;
449
450 /* Runs as soon as possible in the timer context */
451 mod_timer(&priv->restart_timer, jiffies);
452
453 return 0;
454}
455
456/*
457 * CAN bus-off
458 *
459 * This functions should be called when the device goes bus-off to
460 * tell the netif layer that no more packets can be sent or received.
461 * If enabled, a timer is started to trigger bus-off recovery.
462 */
463void can_bus_off(struct net_device *dev)
464{
465 struct can_priv *priv = netdev_priv(dev);
466
467 netdev_dbg(dev, "bus-off\n");
468
469 netif_carrier_off(dev);
470 priv->can_stats.bus_off++;
471
472 if (priv->restart_ms)
473 mod_timer(&priv->restart_timer,
474 jiffies + (priv->restart_ms * HZ) / 1000);
475}
476EXPORT_SYMBOL_GPL(can_bus_off);
477
478static void can_setup(struct net_device *dev)
479{
480 dev->type = ARPHRD_CAN;
481 dev->mtu = CAN_MTU;
482 dev->hard_header_len = 0;
483 dev->addr_len = 0;
484 dev->tx_queue_len = 10;
485
486 /* New-style flags. */
487 dev->flags = IFF_NOARP;
488 dev->features = NETIF_F_HW_CSUM;
489}
490
491struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf)
492{
493 struct sk_buff *skb;
494
495 skb = netdev_alloc_skb(dev, sizeof(struct can_skb_priv) +
496 sizeof(struct can_frame));
497 if (unlikely(!skb))
498 return NULL;
499
500 skb->protocol = htons(ETH_P_CAN);
501 skb->pkt_type = PACKET_BROADCAST;
502 skb->ip_summed = CHECKSUM_UNNECESSARY;
503
504 can_skb_reserve(skb);
505 can_skb_prv(skb)->ifindex = dev->ifindex;
506
507 *cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
508 memset(*cf, 0, sizeof(struct can_frame));
509
510 return skb;
511}
512EXPORT_SYMBOL_GPL(alloc_can_skb);
513
514struct sk_buff *alloc_canfd_skb(struct net_device *dev,
515 struct canfd_frame **cfd)
516{
517 struct sk_buff *skb;
518
519 skb = netdev_alloc_skb(dev, sizeof(struct can_skb_priv) +
520 sizeof(struct canfd_frame));
521 if (unlikely(!skb))
522 return NULL;
523
524 skb->protocol = htons(ETH_P_CANFD);
525 skb->pkt_type = PACKET_BROADCAST;
526 skb->ip_summed = CHECKSUM_UNNECESSARY;
527
528 can_skb_reserve(skb);
529 can_skb_prv(skb)->ifindex = dev->ifindex;
530
531 *cfd = (struct canfd_frame *)skb_put(skb, sizeof(struct canfd_frame));
532 memset(*cfd, 0, sizeof(struct canfd_frame));
533
534 return skb;
535}
536EXPORT_SYMBOL_GPL(alloc_canfd_skb);
537
538struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf)
539{
540 struct sk_buff *skb;
541
542 skb = alloc_can_skb(dev, cf);
543 if (unlikely(!skb))
544 return NULL;
545
546 (*cf)->can_id = CAN_ERR_FLAG;
547 (*cf)->can_dlc = CAN_ERR_DLC;
548
549 return skb;
550}
551EXPORT_SYMBOL_GPL(alloc_can_err_skb);
552
553/*
554 * Allocate and setup space for the CAN network device
555 */
556struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max)
557{
558 struct net_device *dev;
559 struct can_priv *priv;
560 int size;
561
562 if (echo_skb_max)
563 size = ALIGN(sizeof_priv, sizeof(struct sk_buff *)) +
564 echo_skb_max * sizeof(struct sk_buff *);
565 else
566 size = sizeof_priv;
567
568 dev = alloc_netdev(size, "can%d", can_setup);
569 if (!dev)
570 return NULL;
571
572 priv = netdev_priv(dev);
573
574 if (echo_skb_max) {
575 priv->echo_skb_max = echo_skb_max;
576 priv->echo_skb = (void *)priv +
577 ALIGN(sizeof_priv, sizeof(struct sk_buff *));
578 }
579
580 priv->state = CAN_STATE_STOPPED;
581
582 init_timer(&priv->restart_timer);
583
584 return dev;
585}
586EXPORT_SYMBOL_GPL(alloc_candev);
587
588/*
589 * Free space of the CAN network device
590 */
591void free_candev(struct net_device *dev)
592{
593 free_netdev(dev);
594}
595EXPORT_SYMBOL_GPL(free_candev);
596
597/*
598 * changing MTU and control mode for CAN/CANFD devices
599 */
600int can_change_mtu(struct net_device *dev, int new_mtu)
601{
602 struct can_priv *priv = netdev_priv(dev);
603
604 /* Do not allow changing the MTU while running */
605 if (dev->flags & IFF_UP)
606 return -EBUSY;
607
608 /* allow change of MTU according to the CANFD ability of the device */
609 switch (new_mtu) {
610 case CAN_MTU:
611 priv->ctrlmode &= ~CAN_CTRLMODE_FD;
612 break;
613
614 case CANFD_MTU:
615 if (!(priv->ctrlmode_supported & CAN_CTRLMODE_FD))
616 return -EINVAL;
617
618 priv->ctrlmode |= CAN_CTRLMODE_FD;
619 break;
620
621 default:
622 return -EINVAL;
623 }
624
625 dev->mtu = new_mtu;
626 return 0;
627}
628EXPORT_SYMBOL_GPL(can_change_mtu);
629
630/*
631 * Common open function when the device gets opened.
632 *
633 * This function should be called in the open function of the device
634 * driver.
635 */
636int open_candev(struct net_device *dev)
637{
638 struct can_priv *priv = netdev_priv(dev);
639
640 if (!priv->bittiming.bitrate) {
641 netdev_err(dev, "bit-timing not yet defined\n");
642 return -EINVAL;
643 }
644
645 /* For CAN FD the data bitrate has to be >= the arbitration bitrate */
646 if ((priv->ctrlmode & CAN_CTRLMODE_FD) &&
647 (!priv->data_bittiming.bitrate ||
648 (priv->data_bittiming.bitrate < priv->bittiming.bitrate))) {
649 netdev_err(dev, "incorrect/missing data bit-timing\n");
650 return -EINVAL;
651 }
652
653 /* Switch carrier on if device was stopped while in bus-off state */
654 if (!netif_carrier_ok(dev))
655 netif_carrier_on(dev);
656
657 setup_timer(&priv->restart_timer, can_restart, (unsigned long)dev);
658
659 return 0;
660}
661EXPORT_SYMBOL_GPL(open_candev);
662
663/*
664 * Common close function for cleanup before the device gets closed.
665 *
666 * This function should be called in the close function of the device
667 * driver.
668 */
669void close_candev(struct net_device *dev)
670{
671 struct can_priv *priv = netdev_priv(dev);
672
673 del_timer_sync(&priv->restart_timer);
674 can_flush_echo_skb(dev);
675}
676EXPORT_SYMBOL_GPL(close_candev);
677
678/*
679 * CAN netlink interface
680 */
681static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
682 [IFLA_CAN_STATE] = { .type = NLA_U32 },
683 [IFLA_CAN_CTRLMODE] = { .len = sizeof(struct can_ctrlmode) },
684 [IFLA_CAN_RESTART_MS] = { .type = NLA_U32 },
685 [IFLA_CAN_RESTART] = { .type = NLA_U32 },
686 [IFLA_CAN_BITTIMING] = { .len = sizeof(struct can_bittiming) },
687 [IFLA_CAN_BITTIMING_CONST]
688 = { .len = sizeof(struct can_bittiming_const) },
689 [IFLA_CAN_CLOCK] = { .len = sizeof(struct can_clock) },
690 [IFLA_CAN_BERR_COUNTER] = { .len = sizeof(struct can_berr_counter) },
691 [IFLA_CAN_DATA_BITTIMING]
692 = { .len = sizeof(struct can_bittiming) },
693 [IFLA_CAN_DATA_BITTIMING_CONST]
694 = { .len = sizeof(struct can_bittiming_const) },
695};
696
697static int can_changelink(struct net_device *dev,
698 struct nlattr *tb[], struct nlattr *data[])
699{
700 struct can_priv *priv = netdev_priv(dev);
701 int err;
702
703 /* We need synchronization with dev->stop() */
704 ASSERT_RTNL();
705
706 if (data[IFLA_CAN_BITTIMING]) {
707 struct can_bittiming bt;
708
709 /* Do not allow changing bittiming while running */
710 if (dev->flags & IFF_UP)
711 return -EBUSY;
712 memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
713 err = can_get_bittiming(dev, &bt, priv->bittiming_const);
714 if (err)
715 return err;
716 memcpy(&priv->bittiming, &bt, sizeof(bt));
717
718 if (priv->do_set_bittiming) {
719 /* Finally, set the bit-timing registers */
720 err = priv->do_set_bittiming(dev);
721 if (err)
722 return err;
723 }
724 }
725
726 if (data[IFLA_CAN_CTRLMODE]) {
727 struct can_ctrlmode *cm;
728
729 /* Do not allow changing controller mode while running */
730 if (dev->flags & IFF_UP)
731 return -EBUSY;
732 cm = nla_data(data[IFLA_CAN_CTRLMODE]);
733 if (cm->flags & ~priv->ctrlmode_supported)
734 return -EOPNOTSUPP;
735 priv->ctrlmode &= ~cm->mask;
736 priv->ctrlmode |= cm->flags;
737
738 /* CAN_CTRLMODE_FD can only be set when driver supports FD */
739 if (priv->ctrlmode & CAN_CTRLMODE_FD)
740 dev->mtu = CANFD_MTU;
741 else
742 dev->mtu = CAN_MTU;
743 }
744
745 if (data[IFLA_CAN_RESTART_MS]) {
746 /* Do not allow changing restart delay while running */
747 if (dev->flags & IFF_UP)
748 return -EBUSY;
749 priv->restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]);
750 }
751
752 if (data[IFLA_CAN_RESTART]) {
753 /* Do not allow a restart while not running */
754 if (!(dev->flags & IFF_UP))
755 return -EINVAL;
756 err = can_restart_now(dev);
757 if (err)
758 return err;
759 }
760
761 if (data[IFLA_CAN_DATA_BITTIMING]) {
762 struct can_bittiming dbt;
763
764 /* Do not allow changing bittiming while running */
765 if (dev->flags & IFF_UP)
766 return -EBUSY;
767 memcpy(&dbt, nla_data(data[IFLA_CAN_DATA_BITTIMING]),
768 sizeof(dbt));
769 err = can_get_bittiming(dev, &dbt, priv->data_bittiming_const);
770 if (err)
771 return err;
772 memcpy(&priv->data_bittiming, &dbt, sizeof(dbt));
773
774 if (priv->do_set_data_bittiming) {
775 /* Finally, set the bit-timing registers */
776 err = priv->do_set_data_bittiming(dev);
777 if (err)
778 return err;
779 }
780 }
781
782 return 0;
783}
784
785static size_t can_get_size(const struct net_device *dev)
786{
787 struct can_priv *priv = netdev_priv(dev);
788 size_t size = 0;
789
790 if (priv->bittiming.bitrate) /* IFLA_CAN_BITTIMING */
791 size += nla_total_size(sizeof(struct can_bittiming));
792 if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */
793 size += nla_total_size(sizeof(struct can_bittiming_const));
794 size += nla_total_size(sizeof(struct can_clock)); /* IFLA_CAN_CLOCK */
795 size += nla_total_size(sizeof(u32)); /* IFLA_CAN_STATE */
796 size += nla_total_size(sizeof(struct can_ctrlmode)); /* IFLA_CAN_CTRLMODE */
797 size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */
798 if (priv->do_get_berr_counter) /* IFLA_CAN_BERR_COUNTER */
799 size += nla_total_size(sizeof(struct can_berr_counter));
800 if (priv->data_bittiming.bitrate) /* IFLA_CAN_DATA_BITTIMING */
801 size += nla_total_size(sizeof(struct can_bittiming));
802 if (priv->data_bittiming_const) /* IFLA_CAN_DATA_BITTIMING_CONST */
803 size += nla_total_size(sizeof(struct can_bittiming_const));
804
805 return size;
806}
807
808static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
809{
810 struct can_priv *priv = netdev_priv(dev);
811 struct can_ctrlmode cm = {.flags = priv->ctrlmode};
812 struct can_berr_counter bec;
813 enum can_state state = priv->state;
814
815 if (priv->do_get_state)
816 priv->do_get_state(dev, &state);
817
818 if ((priv->bittiming.bitrate &&
819 nla_put(skb, IFLA_CAN_BITTIMING,
820 sizeof(priv->bittiming), &priv->bittiming)) ||
821
822 (priv->bittiming_const &&
823 nla_put(skb, IFLA_CAN_BITTIMING_CONST,
824 sizeof(*priv->bittiming_const), priv->bittiming_const)) ||
825
826 nla_put(skb, IFLA_CAN_CLOCK, sizeof(cm), &priv->clock) ||
827 nla_put_u32(skb, IFLA_CAN_STATE, state) ||
828 nla_put(skb, IFLA_CAN_CTRLMODE, sizeof(cm), &cm) ||
829 nla_put_u32(skb, IFLA_CAN_RESTART_MS, priv->restart_ms) ||
830
831 (priv->do_get_berr_counter &&
832 !priv->do_get_berr_counter(dev, &bec) &&
833 nla_put(skb, IFLA_CAN_BERR_COUNTER, sizeof(bec), &bec)) ||
834
835 (priv->data_bittiming.bitrate &&
836 nla_put(skb, IFLA_CAN_DATA_BITTIMING,
837 sizeof(priv->data_bittiming), &priv->data_bittiming)) ||
838
839 (priv->data_bittiming_const &&
840 nla_put(skb, IFLA_CAN_DATA_BITTIMING_CONST,
841 sizeof(*priv->data_bittiming_const),
842 priv->data_bittiming_const)))
843 return -EMSGSIZE;
844
845 return 0;
846}
847
848static size_t can_get_xstats_size(const struct net_device *dev)
849{
850 return sizeof(struct can_device_stats);
851}
852
853static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev)
854{
855 struct can_priv *priv = netdev_priv(dev);
856
857 if (nla_put(skb, IFLA_INFO_XSTATS,
858 sizeof(priv->can_stats), &priv->can_stats))
859 goto nla_put_failure;
860 return 0;
861
862nla_put_failure:
863 return -EMSGSIZE;
864}
865
866static int can_newlink(struct net *src_net, struct net_device *dev,
867 struct nlattr *tb[], struct nlattr *data[])
868{
869 return -EOPNOTSUPP;
870}
871
872static struct rtnl_link_ops can_link_ops __read_mostly = {
873 .kind = "can",
874 .maxtype = IFLA_CAN_MAX,
875 .policy = can_policy,
876 .setup = can_setup,
877 .newlink = can_newlink,
878 .changelink = can_changelink,
879 .get_size = can_get_size,
880 .fill_info = can_fill_info,
881 .get_xstats_size = can_get_xstats_size,
882 .fill_xstats = can_fill_xstats,
883};
884
885/*
886 * Register the CAN network device
887 */
888int register_candev(struct net_device *dev)
889{
890 dev->rtnl_link_ops = &can_link_ops;
891 return register_netdev(dev);
892}
893EXPORT_SYMBOL_GPL(register_candev);
894
895/*
896 * Unregister the CAN network device
897 */
898void unregister_candev(struct net_device *dev)
899{
900 unregister_netdev(dev);
901}
902EXPORT_SYMBOL_GPL(unregister_candev);
903
904/*
905 * Test if a network device is a candev based device
906 * and return the can_priv* if so.
907 */
908struct can_priv *safe_candev_priv(struct net_device *dev)
909{
910 if ((dev->type != ARPHRD_CAN) || (dev->rtnl_link_ops != &can_link_ops))
911 return NULL;
912
913 return netdev_priv(dev);
914}
915EXPORT_SYMBOL_GPL(safe_candev_priv);
916
917static __init int can_dev_init(void)
918{
919 int err;
920
921 can_led_notifier_init();
922
923 err = rtnl_link_register(&can_link_ops);
924 if (!err)
925 printk(KERN_INFO MOD_DESC "\n");
926
927 return err;
928}
929module_init(can_dev_init);
930
931static __exit void can_dev_exit(void)
932{
933 rtnl_link_unregister(&can_link_ops);
934
935 can_led_notifier_exit();
936}
937module_exit(can_dev_exit);
938
939MODULE_ALIAS_RTNL_LINK("can");
1// SPDX-License-Identifier: GPL-2.0-only
2/* Copyright (C) 2005 Marc Kleine-Budde, Pengutronix
3 * Copyright (C) 2006 Andrey Volkov, Varma Electronics
4 * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
5 */
6
7#include <linux/module.h>
8#include <linux/kernel.h>
9#include <linux/slab.h>
10#include <linux/netdevice.h>
11#include <linux/if_arp.h>
12#include <linux/workqueue.h>
13#include <linux/can.h>
14#include <linux/can/can-ml.h>
15#include <linux/can/dev.h>
16#include <linux/can/skb.h>
17#include <linux/can/netlink.h>
18#include <linux/can/led.h>
19#include <linux/of.h>
20#include <net/rtnetlink.h>
21
22#define MOD_DESC "CAN device driver interface"
23
24MODULE_DESCRIPTION(MOD_DESC);
25MODULE_LICENSE("GPL v2");
26MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
27
28/* CAN DLC to real data length conversion helpers */
29
30static const u8 dlc2len[] = {0, 1, 2, 3, 4, 5, 6, 7,
31 8, 12, 16, 20, 24, 32, 48, 64};
32
33/* get data length from can_dlc with sanitized can_dlc */
34u8 can_dlc2len(u8 can_dlc)
35{
36 return dlc2len[can_dlc & 0x0F];
37}
38EXPORT_SYMBOL_GPL(can_dlc2len);
39
40static const u8 len2dlc[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, /* 0 - 8 */
41 9, 9, 9, 9, /* 9 - 12 */
42 10, 10, 10, 10, /* 13 - 16 */
43 11, 11, 11, 11, /* 17 - 20 */
44 12, 12, 12, 12, /* 21 - 24 */
45 13, 13, 13, 13, 13, 13, 13, 13, /* 25 - 32 */
46 14, 14, 14, 14, 14, 14, 14, 14, /* 33 - 40 */
47 14, 14, 14, 14, 14, 14, 14, 14, /* 41 - 48 */
48 15, 15, 15, 15, 15, 15, 15, 15, /* 49 - 56 */
49 15, 15, 15, 15, 15, 15, 15, 15}; /* 57 - 64 */
50
51/* map the sanitized data length to an appropriate data length code */
52u8 can_len2dlc(u8 len)
53{
54 if (unlikely(len > 64))
55 return 0xF;
56
57 return len2dlc[len];
58}
59EXPORT_SYMBOL_GPL(can_len2dlc);
60
61#ifdef CONFIG_CAN_CALC_BITTIMING
62#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */
63#define CAN_CALC_SYNC_SEG 1
64
65/* Bit-timing calculation derived from:
66 *
67 * Code based on LinCAN sources and H8S2638 project
68 * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz
69 * Copyright 2005 Stanislav Marek
70 * email: pisa@cmp.felk.cvut.cz
71 *
72 * Calculates proper bit-timing parameters for a specified bit-rate
73 * and sample-point, which can then be used to set the bit-timing
74 * registers of the CAN controller. You can find more information
75 * in the header file linux/can/netlink.h.
76 */
77static int
78can_update_sample_point(const struct can_bittiming_const *btc,
79 unsigned int sample_point_nominal, unsigned int tseg,
80 unsigned int *tseg1_ptr, unsigned int *tseg2_ptr,
81 unsigned int *sample_point_error_ptr)
82{
83 unsigned int sample_point_error, best_sample_point_error = UINT_MAX;
84 unsigned int sample_point, best_sample_point = 0;
85 unsigned int tseg1, tseg2;
86 int i;
87
88 for (i = 0; i <= 1; i++) {
89 tseg2 = tseg + CAN_CALC_SYNC_SEG -
90 (sample_point_nominal * (tseg + CAN_CALC_SYNC_SEG)) /
91 1000 - i;
92 tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max);
93 tseg1 = tseg - tseg2;
94 if (tseg1 > btc->tseg1_max) {
95 tseg1 = btc->tseg1_max;
96 tseg2 = tseg - tseg1;
97 }
98
99 sample_point = 1000 * (tseg + CAN_CALC_SYNC_SEG - tseg2) /
100 (tseg + CAN_CALC_SYNC_SEG);
101 sample_point_error = abs(sample_point_nominal - sample_point);
102
103 if (sample_point <= sample_point_nominal &&
104 sample_point_error < best_sample_point_error) {
105 best_sample_point = sample_point;
106 best_sample_point_error = sample_point_error;
107 *tseg1_ptr = tseg1;
108 *tseg2_ptr = tseg2;
109 }
110 }
111
112 if (sample_point_error_ptr)
113 *sample_point_error_ptr = best_sample_point_error;
114
115 return best_sample_point;
116}
117
118static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
119 const struct can_bittiming_const *btc)
120{
121 struct can_priv *priv = netdev_priv(dev);
122 unsigned int bitrate; /* current bitrate */
123 unsigned int bitrate_error; /* difference between current and nominal value */
124 unsigned int best_bitrate_error = UINT_MAX;
125 unsigned int sample_point_error; /* difference between current and nominal value */
126 unsigned int best_sample_point_error = UINT_MAX;
127 unsigned int sample_point_nominal; /* nominal sample point */
128 unsigned int best_tseg = 0; /* current best value for tseg */
129 unsigned int best_brp = 0; /* current best value for brp */
130 unsigned int brp, tsegall, tseg, tseg1 = 0, tseg2 = 0;
131 u64 v64;
132
133 /* Use CiA recommended sample points */
134 if (bt->sample_point) {
135 sample_point_nominal = bt->sample_point;
136 } else {
137 if (bt->bitrate > 800000)
138 sample_point_nominal = 750;
139 else if (bt->bitrate > 500000)
140 sample_point_nominal = 800;
141 else
142 sample_point_nominal = 875;
143 }
144
145 /* tseg even = round down, odd = round up */
146 for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1;
147 tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) {
148 tsegall = CAN_CALC_SYNC_SEG + tseg / 2;
149
150 /* Compute all possible tseg choices (tseg=tseg1+tseg2) */
151 brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2;
152
153 /* choose brp step which is possible in system */
154 brp = (brp / btc->brp_inc) * btc->brp_inc;
155 if (brp < btc->brp_min || brp > btc->brp_max)
156 continue;
157
158 bitrate = priv->clock.freq / (brp * tsegall);
159 bitrate_error = abs(bt->bitrate - bitrate);
160
161 /* tseg brp biterror */
162 if (bitrate_error > best_bitrate_error)
163 continue;
164
165 /* reset sample point error if we have a better bitrate */
166 if (bitrate_error < best_bitrate_error)
167 best_sample_point_error = UINT_MAX;
168
169 can_update_sample_point(btc, sample_point_nominal, tseg / 2,
170 &tseg1, &tseg2, &sample_point_error);
171 if (sample_point_error > best_sample_point_error)
172 continue;
173
174 best_sample_point_error = sample_point_error;
175 best_bitrate_error = bitrate_error;
176 best_tseg = tseg / 2;
177 best_brp = brp;
178
179 if (bitrate_error == 0 && sample_point_error == 0)
180 break;
181 }
182
183 if (best_bitrate_error) {
184 /* Error in one-tenth of a percent */
185 v64 = (u64)best_bitrate_error * 1000;
186 do_div(v64, bt->bitrate);
187 bitrate_error = (u32)v64;
188 if (bitrate_error > CAN_CALC_MAX_ERROR) {
189 netdev_err(dev,
190 "bitrate error %d.%d%% too high\n",
191 bitrate_error / 10, bitrate_error % 10);
192 return -EDOM;
193 }
194 netdev_warn(dev, "bitrate error %d.%d%%\n",
195 bitrate_error / 10, bitrate_error % 10);
196 }
197
198 /* real sample point */
199 bt->sample_point = can_update_sample_point(btc, sample_point_nominal,
200 best_tseg, &tseg1, &tseg2,
201 NULL);
202
203 v64 = (u64)best_brp * 1000 * 1000 * 1000;
204 do_div(v64, priv->clock.freq);
205 bt->tq = (u32)v64;
206 bt->prop_seg = tseg1 / 2;
207 bt->phase_seg1 = tseg1 - bt->prop_seg;
208 bt->phase_seg2 = tseg2;
209
210 /* check for sjw user settings */
211 if (!bt->sjw || !btc->sjw_max) {
212 bt->sjw = 1;
213 } else {
214 /* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */
215 if (bt->sjw > btc->sjw_max)
216 bt->sjw = btc->sjw_max;
217 /* bt->sjw must not be higher than tseg2 */
218 if (tseg2 < bt->sjw)
219 bt->sjw = tseg2;
220 }
221
222 bt->brp = best_brp;
223
224 /* real bitrate */
225 bt->bitrate = priv->clock.freq /
226 (bt->brp * (CAN_CALC_SYNC_SEG + tseg1 + tseg2));
227
228 return 0;
229}
230#else /* !CONFIG_CAN_CALC_BITTIMING */
231static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
232 const struct can_bittiming_const *btc)
233{
234 netdev_err(dev, "bit-timing calculation not available\n");
235 return -EINVAL;
236}
237#endif /* CONFIG_CAN_CALC_BITTIMING */
238
239/* Checks the validity of the specified bit-timing parameters prop_seg,
240 * phase_seg1, phase_seg2 and sjw and tries to determine the bitrate
241 * prescaler value brp. You can find more information in the header
242 * file linux/can/netlink.h.
243 */
244static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt,
245 const struct can_bittiming_const *btc)
246{
247 struct can_priv *priv = netdev_priv(dev);
248 int tseg1, alltseg;
249 u64 brp64;
250
251 tseg1 = bt->prop_seg + bt->phase_seg1;
252 if (!bt->sjw)
253 bt->sjw = 1;
254 if (bt->sjw > btc->sjw_max ||
255 tseg1 < btc->tseg1_min || tseg1 > btc->tseg1_max ||
256 bt->phase_seg2 < btc->tseg2_min || bt->phase_seg2 > btc->tseg2_max)
257 return -ERANGE;
258
259 brp64 = (u64)priv->clock.freq * (u64)bt->tq;
260 if (btc->brp_inc > 1)
261 do_div(brp64, btc->brp_inc);
262 brp64 += 500000000UL - 1;
263 do_div(brp64, 1000000000UL); /* the practicable BRP */
264 if (btc->brp_inc > 1)
265 brp64 *= btc->brp_inc;
266 bt->brp = (u32)brp64;
267
268 if (bt->brp < btc->brp_min || bt->brp > btc->brp_max)
269 return -EINVAL;
270
271 alltseg = bt->prop_seg + bt->phase_seg1 + bt->phase_seg2 + 1;
272 bt->bitrate = priv->clock.freq / (bt->brp * alltseg);
273 bt->sample_point = ((tseg1 + 1) * 1000) / alltseg;
274
275 return 0;
276}
277
278/* Checks the validity of predefined bitrate settings */
279static int
280can_validate_bitrate(struct net_device *dev, struct can_bittiming *bt,
281 const u32 *bitrate_const,
282 const unsigned int bitrate_const_cnt)
283{
284 struct can_priv *priv = netdev_priv(dev);
285 unsigned int i;
286
287 for (i = 0; i < bitrate_const_cnt; i++) {
288 if (bt->bitrate == bitrate_const[i])
289 break;
290 }
291
292 if (i >= priv->bitrate_const_cnt)
293 return -EINVAL;
294
295 return 0;
296}
297
298static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt,
299 const struct can_bittiming_const *btc,
300 const u32 *bitrate_const,
301 const unsigned int bitrate_const_cnt)
302{
303 int err;
304
305 /* Depending on the given can_bittiming parameter structure the CAN
306 * timing parameters are calculated based on the provided bitrate OR
307 * alternatively the CAN timing parameters (tq, prop_seg, etc.) are
308 * provided directly which are then checked and fixed up.
309 */
310 if (!bt->tq && bt->bitrate && btc)
311 err = can_calc_bittiming(dev, bt, btc);
312 else if (bt->tq && !bt->bitrate && btc)
313 err = can_fixup_bittiming(dev, bt, btc);
314 else if (!bt->tq && bt->bitrate && bitrate_const)
315 err = can_validate_bitrate(dev, bt, bitrate_const,
316 bitrate_const_cnt);
317 else
318 err = -EINVAL;
319
320 return err;
321}
322
323static void can_update_state_error_stats(struct net_device *dev,
324 enum can_state new_state)
325{
326 struct can_priv *priv = netdev_priv(dev);
327
328 if (new_state <= priv->state)
329 return;
330
331 switch (new_state) {
332 case CAN_STATE_ERROR_WARNING:
333 priv->can_stats.error_warning++;
334 break;
335 case CAN_STATE_ERROR_PASSIVE:
336 priv->can_stats.error_passive++;
337 break;
338 case CAN_STATE_BUS_OFF:
339 priv->can_stats.bus_off++;
340 break;
341 default:
342 break;
343 }
344}
345
346static int can_tx_state_to_frame(struct net_device *dev, enum can_state state)
347{
348 switch (state) {
349 case CAN_STATE_ERROR_ACTIVE:
350 return CAN_ERR_CRTL_ACTIVE;
351 case CAN_STATE_ERROR_WARNING:
352 return CAN_ERR_CRTL_TX_WARNING;
353 case CAN_STATE_ERROR_PASSIVE:
354 return CAN_ERR_CRTL_TX_PASSIVE;
355 default:
356 return 0;
357 }
358}
359
360static int can_rx_state_to_frame(struct net_device *dev, enum can_state state)
361{
362 switch (state) {
363 case CAN_STATE_ERROR_ACTIVE:
364 return CAN_ERR_CRTL_ACTIVE;
365 case CAN_STATE_ERROR_WARNING:
366 return CAN_ERR_CRTL_RX_WARNING;
367 case CAN_STATE_ERROR_PASSIVE:
368 return CAN_ERR_CRTL_RX_PASSIVE;
369 default:
370 return 0;
371 }
372}
373
374void can_change_state(struct net_device *dev, struct can_frame *cf,
375 enum can_state tx_state, enum can_state rx_state)
376{
377 struct can_priv *priv = netdev_priv(dev);
378 enum can_state new_state = max(tx_state, rx_state);
379
380 if (unlikely(new_state == priv->state)) {
381 netdev_warn(dev, "%s: oops, state did not change", __func__);
382 return;
383 }
384
385 netdev_dbg(dev, "New error state: %d\n", new_state);
386
387 can_update_state_error_stats(dev, new_state);
388 priv->state = new_state;
389
390 if (!cf)
391 return;
392
393 if (unlikely(new_state == CAN_STATE_BUS_OFF)) {
394 cf->can_id |= CAN_ERR_BUSOFF;
395 return;
396 }
397
398 cf->can_id |= CAN_ERR_CRTL;
399 cf->data[1] |= tx_state >= rx_state ?
400 can_tx_state_to_frame(dev, tx_state) : 0;
401 cf->data[1] |= tx_state <= rx_state ?
402 can_rx_state_to_frame(dev, rx_state) : 0;
403}
404EXPORT_SYMBOL_GPL(can_change_state);
405
406/* Local echo of CAN messages
407 *
408 * CAN network devices *should* support a local echo functionality
409 * (see Documentation/networking/can.rst). To test the handling of CAN
410 * interfaces that do not support the local echo both driver types are
411 * implemented. In the case that the driver does not support the echo
412 * the IFF_ECHO remains clear in dev->flags. This causes the PF_CAN core
413 * to perform the echo as a fallback solution.
414 */
415static void can_flush_echo_skb(struct net_device *dev)
416{
417 struct can_priv *priv = netdev_priv(dev);
418 struct net_device_stats *stats = &dev->stats;
419 int i;
420
421 for (i = 0; i < priv->echo_skb_max; i++) {
422 if (priv->echo_skb[i]) {
423 kfree_skb(priv->echo_skb[i]);
424 priv->echo_skb[i] = NULL;
425 stats->tx_dropped++;
426 stats->tx_aborted_errors++;
427 }
428 }
429}
430
431/* Put the skb on the stack to be looped backed locally lateron
432 *
433 * The function is typically called in the start_xmit function
434 * of the device driver. The driver must protect access to
435 * priv->echo_skb, if necessary.
436 */
437void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
438 unsigned int idx)
439{
440 struct can_priv *priv = netdev_priv(dev);
441
442 BUG_ON(idx >= priv->echo_skb_max);
443
444 /* check flag whether this packet has to be looped back */
445 if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK ||
446 (skb->protocol != htons(ETH_P_CAN) &&
447 skb->protocol != htons(ETH_P_CANFD))) {
448 kfree_skb(skb);
449 return;
450 }
451
452 if (!priv->echo_skb[idx]) {
453 skb = can_create_echo_skb(skb);
454 if (!skb)
455 return;
456
457 /* make settings for echo to reduce code in irq context */
458 skb->pkt_type = PACKET_BROADCAST;
459 skb->ip_summed = CHECKSUM_UNNECESSARY;
460 skb->dev = dev;
461
462 /* save this skb for tx interrupt echo handling */
463 priv->echo_skb[idx] = skb;
464 } else {
465 /* locking problem with netif_stop_queue() ?? */
466 netdev_err(dev, "%s: BUG! echo_skb is occupied!\n", __func__);
467 kfree_skb(skb);
468 }
469}
470EXPORT_SYMBOL_GPL(can_put_echo_skb);
471
472struct sk_buff *
473__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr)
474{
475 struct can_priv *priv = netdev_priv(dev);
476
477 if (idx >= priv->echo_skb_max) {
478 netdev_err(dev, "%s: BUG! Trying to access can_priv::echo_skb out of bounds (%u/max %u)\n",
479 __func__, idx, priv->echo_skb_max);
480 return NULL;
481 }
482
483 if (priv->echo_skb[idx]) {
484 /* Using "struct canfd_frame::len" for the frame
485 * length is supported on both CAN and CANFD frames.
486 */
487 struct sk_buff *skb = priv->echo_skb[idx];
488 struct canfd_frame *cf = (struct canfd_frame *)skb->data;
489 u8 len = cf->len;
490
491 *len_ptr = len;
492 priv->echo_skb[idx] = NULL;
493
494 return skb;
495 }
496
497 return NULL;
498}
499
500/* Get the skb from the stack and loop it back locally
501 *
502 * The function is typically called when the TX done interrupt
503 * is handled in the device driver. The driver must protect
504 * access to priv->echo_skb, if necessary.
505 */
506unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx)
507{
508 struct sk_buff *skb;
509 u8 len;
510
511 skb = __can_get_echo_skb(dev, idx, &len);
512 if (!skb)
513 return 0;
514
515 netif_rx(skb);
516
517 return len;
518}
519EXPORT_SYMBOL_GPL(can_get_echo_skb);
520
521/* Remove the skb from the stack and free it.
522 *
523 * The function is typically called when TX failed.
524 */
525void can_free_echo_skb(struct net_device *dev, unsigned int idx)
526{
527 struct can_priv *priv = netdev_priv(dev);
528
529 BUG_ON(idx >= priv->echo_skb_max);
530
531 if (priv->echo_skb[idx]) {
532 dev_kfree_skb_any(priv->echo_skb[idx]);
533 priv->echo_skb[idx] = NULL;
534 }
535}
536EXPORT_SYMBOL_GPL(can_free_echo_skb);
537
538/* CAN device restart for bus-off recovery */
539static void can_restart(struct net_device *dev)
540{
541 struct can_priv *priv = netdev_priv(dev);
542 struct net_device_stats *stats = &dev->stats;
543 struct sk_buff *skb;
544 struct can_frame *cf;
545 int err;
546
547 BUG_ON(netif_carrier_ok(dev));
548
549 /* No synchronization needed because the device is bus-off and
550 * no messages can come in or go out.
551 */
552 can_flush_echo_skb(dev);
553
554 /* send restart message upstream */
555 skb = alloc_can_err_skb(dev, &cf);
556 if (!skb) {
557 err = -ENOMEM;
558 goto restart;
559 }
560 cf->can_id |= CAN_ERR_RESTARTED;
561
562 netif_rx(skb);
563
564 stats->rx_packets++;
565 stats->rx_bytes += cf->can_dlc;
566
567restart:
568 netdev_dbg(dev, "restarted\n");
569 priv->can_stats.restarts++;
570
571 /* Now restart the device */
572 err = priv->do_set_mode(dev, CAN_MODE_START);
573
574 netif_carrier_on(dev);
575 if (err)
576 netdev_err(dev, "Error %d during restart", err);
577}
578
579static void can_restart_work(struct work_struct *work)
580{
581 struct delayed_work *dwork = to_delayed_work(work);
582 struct can_priv *priv = container_of(dwork, struct can_priv,
583 restart_work);
584
585 can_restart(priv->dev);
586}
587
588int can_restart_now(struct net_device *dev)
589{
590 struct can_priv *priv = netdev_priv(dev);
591
592 /* A manual restart is only permitted if automatic restart is
593 * disabled and the device is in the bus-off state
594 */
595 if (priv->restart_ms)
596 return -EINVAL;
597 if (priv->state != CAN_STATE_BUS_OFF)
598 return -EBUSY;
599
600 cancel_delayed_work_sync(&priv->restart_work);
601 can_restart(dev);
602
603 return 0;
604}
605
606/* CAN bus-off
607 *
608 * This functions should be called when the device goes bus-off to
609 * tell the netif layer that no more packets can be sent or received.
610 * If enabled, a timer is started to trigger bus-off recovery.
611 */
612void can_bus_off(struct net_device *dev)
613{
614 struct can_priv *priv = netdev_priv(dev);
615
616 netdev_info(dev, "bus-off\n");
617
618 netif_carrier_off(dev);
619
620 if (priv->restart_ms)
621 schedule_delayed_work(&priv->restart_work,
622 msecs_to_jiffies(priv->restart_ms));
623}
624EXPORT_SYMBOL_GPL(can_bus_off);
625
626static void can_setup(struct net_device *dev)
627{
628 dev->type = ARPHRD_CAN;
629 dev->mtu = CAN_MTU;
630 dev->hard_header_len = 0;
631 dev->addr_len = 0;
632 dev->tx_queue_len = 10;
633
634 /* New-style flags. */
635 dev->flags = IFF_NOARP;
636 dev->features = NETIF_F_HW_CSUM;
637}
638
639struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf)
640{
641 struct sk_buff *skb;
642
643 skb = netdev_alloc_skb(dev, sizeof(struct can_skb_priv) +
644 sizeof(struct can_frame));
645 if (unlikely(!skb))
646 return NULL;
647
648 skb->protocol = htons(ETH_P_CAN);
649 skb->pkt_type = PACKET_BROADCAST;
650 skb->ip_summed = CHECKSUM_UNNECESSARY;
651
652 skb_reset_mac_header(skb);
653 skb_reset_network_header(skb);
654 skb_reset_transport_header(skb);
655
656 can_skb_reserve(skb);
657 can_skb_prv(skb)->ifindex = dev->ifindex;
658 can_skb_prv(skb)->skbcnt = 0;
659
660 *cf = skb_put_zero(skb, sizeof(struct can_frame));
661
662 return skb;
663}
664EXPORT_SYMBOL_GPL(alloc_can_skb);
665
666struct sk_buff *alloc_canfd_skb(struct net_device *dev,
667 struct canfd_frame **cfd)
668{
669 struct sk_buff *skb;
670
671 skb = netdev_alloc_skb(dev, sizeof(struct can_skb_priv) +
672 sizeof(struct canfd_frame));
673 if (unlikely(!skb))
674 return NULL;
675
676 skb->protocol = htons(ETH_P_CANFD);
677 skb->pkt_type = PACKET_BROADCAST;
678 skb->ip_summed = CHECKSUM_UNNECESSARY;
679
680 skb_reset_mac_header(skb);
681 skb_reset_network_header(skb);
682 skb_reset_transport_header(skb);
683
684 can_skb_reserve(skb);
685 can_skb_prv(skb)->ifindex = dev->ifindex;
686 can_skb_prv(skb)->skbcnt = 0;
687
688 *cfd = skb_put_zero(skb, sizeof(struct canfd_frame));
689
690 return skb;
691}
692EXPORT_SYMBOL_GPL(alloc_canfd_skb);
693
694struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf)
695{
696 struct sk_buff *skb;
697
698 skb = alloc_can_skb(dev, cf);
699 if (unlikely(!skb))
700 return NULL;
701
702 (*cf)->can_id = CAN_ERR_FLAG;
703 (*cf)->can_dlc = CAN_ERR_DLC;
704
705 return skb;
706}
707EXPORT_SYMBOL_GPL(alloc_can_err_skb);
708
709/* Allocate and setup space for the CAN network device */
710struct net_device *alloc_candev_mqs(int sizeof_priv, unsigned int echo_skb_max,
711 unsigned int txqs, unsigned int rxqs)
712{
713 struct net_device *dev;
714 struct can_priv *priv;
715 int size;
716
717 /* We put the driver's priv, the CAN mid layer priv and the
718 * echo skb into the netdevice's priv. The memory layout for
719 * the netdev_priv is like this:
720 *
721 * +-------------------------+
722 * | driver's priv |
723 * +-------------------------+
724 * | struct can_ml_priv |
725 * +-------------------------+
726 * | array of struct sk_buff |
727 * +-------------------------+
728 */
729
730 size = ALIGN(sizeof_priv, NETDEV_ALIGN) + sizeof(struct can_ml_priv);
731
732 if (echo_skb_max)
733 size = ALIGN(size, sizeof(struct sk_buff *)) +
734 echo_skb_max * sizeof(struct sk_buff *);
735
736 dev = alloc_netdev_mqs(size, "can%d", NET_NAME_UNKNOWN, can_setup,
737 txqs, rxqs);
738 if (!dev)
739 return NULL;
740
741 priv = netdev_priv(dev);
742 priv->dev = dev;
743
744 dev->ml_priv = (void *)priv + ALIGN(sizeof_priv, NETDEV_ALIGN);
745
746 if (echo_skb_max) {
747 priv->echo_skb_max = echo_skb_max;
748 priv->echo_skb = (void *)priv +
749 (size - echo_skb_max * sizeof(struct sk_buff *));
750 }
751
752 priv->state = CAN_STATE_STOPPED;
753
754 INIT_DELAYED_WORK(&priv->restart_work, can_restart_work);
755
756 return dev;
757}
758EXPORT_SYMBOL_GPL(alloc_candev_mqs);
759
760/* Free space of the CAN network device */
761void free_candev(struct net_device *dev)
762{
763 free_netdev(dev);
764}
765EXPORT_SYMBOL_GPL(free_candev);
766
767/* changing MTU and control mode for CAN/CANFD devices */
768int can_change_mtu(struct net_device *dev, int new_mtu)
769{
770 struct can_priv *priv = netdev_priv(dev);
771
772 /* Do not allow changing the MTU while running */
773 if (dev->flags & IFF_UP)
774 return -EBUSY;
775
776 /* allow change of MTU according to the CANFD ability of the device */
777 switch (new_mtu) {
778 case CAN_MTU:
779 /* 'CANFD-only' controllers can not switch to CAN_MTU */
780 if (priv->ctrlmode_static & CAN_CTRLMODE_FD)
781 return -EINVAL;
782
783 priv->ctrlmode &= ~CAN_CTRLMODE_FD;
784 break;
785
786 case CANFD_MTU:
787 /* check for potential CANFD ability */
788 if (!(priv->ctrlmode_supported & CAN_CTRLMODE_FD) &&
789 !(priv->ctrlmode_static & CAN_CTRLMODE_FD))
790 return -EINVAL;
791
792 priv->ctrlmode |= CAN_CTRLMODE_FD;
793 break;
794
795 default:
796 return -EINVAL;
797 }
798
799 dev->mtu = new_mtu;
800 return 0;
801}
802EXPORT_SYMBOL_GPL(can_change_mtu);
803
804/* Common open function when the device gets opened.
805 *
806 * This function should be called in the open function of the device
807 * driver.
808 */
809int open_candev(struct net_device *dev)
810{
811 struct can_priv *priv = netdev_priv(dev);
812
813 if (!priv->bittiming.bitrate) {
814 netdev_err(dev, "bit-timing not yet defined\n");
815 return -EINVAL;
816 }
817
818 /* For CAN FD the data bitrate has to be >= the arbitration bitrate */
819 if ((priv->ctrlmode & CAN_CTRLMODE_FD) &&
820 (!priv->data_bittiming.bitrate ||
821 priv->data_bittiming.bitrate < priv->bittiming.bitrate)) {
822 netdev_err(dev, "incorrect/missing data bit-timing\n");
823 return -EINVAL;
824 }
825
826 /* Switch carrier on if device was stopped while in bus-off state */
827 if (!netif_carrier_ok(dev))
828 netif_carrier_on(dev);
829
830 return 0;
831}
832EXPORT_SYMBOL_GPL(open_candev);
833
834#ifdef CONFIG_OF
835/* Common function that can be used to understand the limitation of
836 * a transceiver when it provides no means to determine these limitations
837 * at runtime.
838 */
839void of_can_transceiver(struct net_device *dev)
840{
841 struct device_node *dn;
842 struct can_priv *priv = netdev_priv(dev);
843 struct device_node *np = dev->dev.parent->of_node;
844 int ret;
845
846 dn = of_get_child_by_name(np, "can-transceiver");
847 if (!dn)
848 return;
849
850 ret = of_property_read_u32(dn, "max-bitrate", &priv->bitrate_max);
851 of_node_put(dn);
852 if ((ret && ret != -EINVAL) || (!ret && !priv->bitrate_max))
853 netdev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit.\n");
854}
855EXPORT_SYMBOL_GPL(of_can_transceiver);
856#endif
857
858/* Common close function for cleanup before the device gets closed.
859 *
860 * This function should be called in the close function of the device
861 * driver.
862 */
863void close_candev(struct net_device *dev)
864{
865 struct can_priv *priv = netdev_priv(dev);
866
867 cancel_delayed_work_sync(&priv->restart_work);
868 can_flush_echo_skb(dev);
869}
870EXPORT_SYMBOL_GPL(close_candev);
871
872/* CAN netlink interface */
873static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
874 [IFLA_CAN_STATE] = { .type = NLA_U32 },
875 [IFLA_CAN_CTRLMODE] = { .len = sizeof(struct can_ctrlmode) },
876 [IFLA_CAN_RESTART_MS] = { .type = NLA_U32 },
877 [IFLA_CAN_RESTART] = { .type = NLA_U32 },
878 [IFLA_CAN_BITTIMING] = { .len = sizeof(struct can_bittiming) },
879 [IFLA_CAN_BITTIMING_CONST]
880 = { .len = sizeof(struct can_bittiming_const) },
881 [IFLA_CAN_CLOCK] = { .len = sizeof(struct can_clock) },
882 [IFLA_CAN_BERR_COUNTER] = { .len = sizeof(struct can_berr_counter) },
883 [IFLA_CAN_DATA_BITTIMING]
884 = { .len = sizeof(struct can_bittiming) },
885 [IFLA_CAN_DATA_BITTIMING_CONST]
886 = { .len = sizeof(struct can_bittiming_const) },
887};
888
889static int can_validate(struct nlattr *tb[], struct nlattr *data[],
890 struct netlink_ext_ack *extack)
891{
892 bool is_can_fd = false;
893
894 /* Make sure that valid CAN FD configurations always consist of
895 * - nominal/arbitration bittiming
896 * - data bittiming
897 * - control mode with CAN_CTRLMODE_FD set
898 */
899
900 if (!data)
901 return 0;
902
903 if (data[IFLA_CAN_CTRLMODE]) {
904 struct can_ctrlmode *cm = nla_data(data[IFLA_CAN_CTRLMODE]);
905
906 is_can_fd = cm->flags & cm->mask & CAN_CTRLMODE_FD;
907 }
908
909 if (is_can_fd) {
910 if (!data[IFLA_CAN_BITTIMING] || !data[IFLA_CAN_DATA_BITTIMING])
911 return -EOPNOTSUPP;
912 }
913
914 if (data[IFLA_CAN_DATA_BITTIMING]) {
915 if (!is_can_fd || !data[IFLA_CAN_BITTIMING])
916 return -EOPNOTSUPP;
917 }
918
919 return 0;
920}
921
922static int can_changelink(struct net_device *dev, struct nlattr *tb[],
923 struct nlattr *data[],
924 struct netlink_ext_ack *extack)
925{
926 struct can_priv *priv = netdev_priv(dev);
927 int err;
928
929 /* We need synchronization with dev->stop() */
930 ASSERT_RTNL();
931
932 if (data[IFLA_CAN_BITTIMING]) {
933 struct can_bittiming bt;
934
935 /* Do not allow changing bittiming while running */
936 if (dev->flags & IFF_UP)
937 return -EBUSY;
938
939 /* Calculate bittiming parameters based on
940 * bittiming_const if set, otherwise pass bitrate
941 * directly via do_set_bitrate(). Bail out if neither
942 * is given.
943 */
944 if (!priv->bittiming_const && !priv->do_set_bittiming)
945 return -EOPNOTSUPP;
946
947 memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
948 err = can_get_bittiming(dev, &bt,
949 priv->bittiming_const,
950 priv->bitrate_const,
951 priv->bitrate_const_cnt);
952 if (err)
953 return err;
954
955 if (priv->bitrate_max && bt.bitrate > priv->bitrate_max) {
956 netdev_err(dev, "arbitration bitrate surpasses transceiver capabilities of %d bps\n",
957 priv->bitrate_max);
958 return -EINVAL;
959 }
960
961 memcpy(&priv->bittiming, &bt, sizeof(bt));
962
963 if (priv->do_set_bittiming) {
964 /* Finally, set the bit-timing registers */
965 err = priv->do_set_bittiming(dev);
966 if (err)
967 return err;
968 }
969 }
970
971 if (data[IFLA_CAN_CTRLMODE]) {
972 struct can_ctrlmode *cm;
973 u32 ctrlstatic;
974 u32 maskedflags;
975
976 /* Do not allow changing controller mode while running */
977 if (dev->flags & IFF_UP)
978 return -EBUSY;
979 cm = nla_data(data[IFLA_CAN_CTRLMODE]);
980 ctrlstatic = priv->ctrlmode_static;
981 maskedflags = cm->flags & cm->mask;
982
983 /* check whether provided bits are allowed to be passed */
984 if (cm->mask & ~(priv->ctrlmode_supported | ctrlstatic))
985 return -EOPNOTSUPP;
986
987 /* do not check for static fd-non-iso if 'fd' is disabled */
988 if (!(maskedflags & CAN_CTRLMODE_FD))
989 ctrlstatic &= ~CAN_CTRLMODE_FD_NON_ISO;
990
991 /* make sure static options are provided by configuration */
992 if ((maskedflags & ctrlstatic) != ctrlstatic)
993 return -EOPNOTSUPP;
994
995 /* clear bits to be modified and copy the flag values */
996 priv->ctrlmode &= ~cm->mask;
997 priv->ctrlmode |= maskedflags;
998
999 /* CAN_CTRLMODE_FD can only be set when driver supports FD */
1000 if (priv->ctrlmode & CAN_CTRLMODE_FD)
1001 dev->mtu = CANFD_MTU;
1002 else
1003 dev->mtu = CAN_MTU;
1004 }
1005
1006 if (data[IFLA_CAN_RESTART_MS]) {
1007 /* Do not allow changing restart delay while running */
1008 if (dev->flags & IFF_UP)
1009 return -EBUSY;
1010 priv->restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]);
1011 }
1012
1013 if (data[IFLA_CAN_RESTART]) {
1014 /* Do not allow a restart while not running */
1015 if (!(dev->flags & IFF_UP))
1016 return -EINVAL;
1017 err = can_restart_now(dev);
1018 if (err)
1019 return err;
1020 }
1021
1022 if (data[IFLA_CAN_DATA_BITTIMING]) {
1023 struct can_bittiming dbt;
1024
1025 /* Do not allow changing bittiming while running */
1026 if (dev->flags & IFF_UP)
1027 return -EBUSY;
1028
1029 /* Calculate bittiming parameters based on
1030 * data_bittiming_const if set, otherwise pass bitrate
1031 * directly via do_set_bitrate(). Bail out if neither
1032 * is given.
1033 */
1034 if (!priv->data_bittiming_const && !priv->do_set_data_bittiming)
1035 return -EOPNOTSUPP;
1036
1037 memcpy(&dbt, nla_data(data[IFLA_CAN_DATA_BITTIMING]),
1038 sizeof(dbt));
1039 err = can_get_bittiming(dev, &dbt,
1040 priv->data_bittiming_const,
1041 priv->data_bitrate_const,
1042 priv->data_bitrate_const_cnt);
1043 if (err)
1044 return err;
1045
1046 if (priv->bitrate_max && dbt.bitrate > priv->bitrate_max) {
1047 netdev_err(dev, "canfd data bitrate surpasses transceiver capabilities of %d bps\n",
1048 priv->bitrate_max);
1049 return -EINVAL;
1050 }
1051
1052 memcpy(&priv->data_bittiming, &dbt, sizeof(dbt));
1053
1054 if (priv->do_set_data_bittiming) {
1055 /* Finally, set the bit-timing registers */
1056 err = priv->do_set_data_bittiming(dev);
1057 if (err)
1058 return err;
1059 }
1060 }
1061
1062 if (data[IFLA_CAN_TERMINATION]) {
1063 const u16 termval = nla_get_u16(data[IFLA_CAN_TERMINATION]);
1064 const unsigned int num_term = priv->termination_const_cnt;
1065 unsigned int i;
1066
1067 if (!priv->do_set_termination)
1068 return -EOPNOTSUPP;
1069
1070 /* check whether given value is supported by the interface */
1071 for (i = 0; i < num_term; i++) {
1072 if (termval == priv->termination_const[i])
1073 break;
1074 }
1075 if (i >= num_term)
1076 return -EINVAL;
1077
1078 /* Finally, set the termination value */
1079 err = priv->do_set_termination(dev, termval);
1080 if (err)
1081 return err;
1082
1083 priv->termination = termval;
1084 }
1085
1086 return 0;
1087}
1088
1089static size_t can_get_size(const struct net_device *dev)
1090{
1091 struct can_priv *priv = netdev_priv(dev);
1092 size_t size = 0;
1093
1094 if (priv->bittiming.bitrate) /* IFLA_CAN_BITTIMING */
1095 size += nla_total_size(sizeof(struct can_bittiming));
1096 if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */
1097 size += nla_total_size(sizeof(struct can_bittiming_const));
1098 size += nla_total_size(sizeof(struct can_clock)); /* IFLA_CAN_CLOCK */
1099 size += nla_total_size(sizeof(u32)); /* IFLA_CAN_STATE */
1100 size += nla_total_size(sizeof(struct can_ctrlmode)); /* IFLA_CAN_CTRLMODE */
1101 size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */
1102 if (priv->do_get_berr_counter) /* IFLA_CAN_BERR_COUNTER */
1103 size += nla_total_size(sizeof(struct can_berr_counter));
1104 if (priv->data_bittiming.bitrate) /* IFLA_CAN_DATA_BITTIMING */
1105 size += nla_total_size(sizeof(struct can_bittiming));
1106 if (priv->data_bittiming_const) /* IFLA_CAN_DATA_BITTIMING_CONST */
1107 size += nla_total_size(sizeof(struct can_bittiming_const));
1108 if (priv->termination_const) {
1109 size += nla_total_size(sizeof(priv->termination)); /* IFLA_CAN_TERMINATION */
1110 size += nla_total_size(sizeof(*priv->termination_const) * /* IFLA_CAN_TERMINATION_CONST */
1111 priv->termination_const_cnt);
1112 }
1113 if (priv->bitrate_const) /* IFLA_CAN_BITRATE_CONST */
1114 size += nla_total_size(sizeof(*priv->bitrate_const) *
1115 priv->bitrate_const_cnt);
1116 if (priv->data_bitrate_const) /* IFLA_CAN_DATA_BITRATE_CONST */
1117 size += nla_total_size(sizeof(*priv->data_bitrate_const) *
1118 priv->data_bitrate_const_cnt);
1119 size += sizeof(priv->bitrate_max); /* IFLA_CAN_BITRATE_MAX */
1120
1121 return size;
1122}
1123
1124static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
1125{
1126 struct can_priv *priv = netdev_priv(dev);
1127 struct can_ctrlmode cm = {.flags = priv->ctrlmode};
1128 struct can_berr_counter bec;
1129 enum can_state state = priv->state;
1130
1131 if (priv->do_get_state)
1132 priv->do_get_state(dev, &state);
1133
1134 if ((priv->bittiming.bitrate &&
1135 nla_put(skb, IFLA_CAN_BITTIMING,
1136 sizeof(priv->bittiming), &priv->bittiming)) ||
1137
1138 (priv->bittiming_const &&
1139 nla_put(skb, IFLA_CAN_BITTIMING_CONST,
1140 sizeof(*priv->bittiming_const), priv->bittiming_const)) ||
1141
1142 nla_put(skb, IFLA_CAN_CLOCK, sizeof(priv->clock), &priv->clock) ||
1143 nla_put_u32(skb, IFLA_CAN_STATE, state) ||
1144 nla_put(skb, IFLA_CAN_CTRLMODE, sizeof(cm), &cm) ||
1145 nla_put_u32(skb, IFLA_CAN_RESTART_MS, priv->restart_ms) ||
1146
1147 (priv->do_get_berr_counter &&
1148 !priv->do_get_berr_counter(dev, &bec) &&
1149 nla_put(skb, IFLA_CAN_BERR_COUNTER, sizeof(bec), &bec)) ||
1150
1151 (priv->data_bittiming.bitrate &&
1152 nla_put(skb, IFLA_CAN_DATA_BITTIMING,
1153 sizeof(priv->data_bittiming), &priv->data_bittiming)) ||
1154
1155 (priv->data_bittiming_const &&
1156 nla_put(skb, IFLA_CAN_DATA_BITTIMING_CONST,
1157 sizeof(*priv->data_bittiming_const),
1158 priv->data_bittiming_const)) ||
1159
1160 (priv->termination_const &&
1161 (nla_put_u16(skb, IFLA_CAN_TERMINATION, priv->termination) ||
1162 nla_put(skb, IFLA_CAN_TERMINATION_CONST,
1163 sizeof(*priv->termination_const) *
1164 priv->termination_const_cnt,
1165 priv->termination_const))) ||
1166
1167 (priv->bitrate_const &&
1168 nla_put(skb, IFLA_CAN_BITRATE_CONST,
1169 sizeof(*priv->bitrate_const) *
1170 priv->bitrate_const_cnt,
1171 priv->bitrate_const)) ||
1172
1173 (priv->data_bitrate_const &&
1174 nla_put(skb, IFLA_CAN_DATA_BITRATE_CONST,
1175 sizeof(*priv->data_bitrate_const) *
1176 priv->data_bitrate_const_cnt,
1177 priv->data_bitrate_const)) ||
1178
1179 (nla_put(skb, IFLA_CAN_BITRATE_MAX,
1180 sizeof(priv->bitrate_max),
1181 &priv->bitrate_max))
1182 )
1183
1184 return -EMSGSIZE;
1185
1186 return 0;
1187}
1188
1189static size_t can_get_xstats_size(const struct net_device *dev)
1190{
1191 return sizeof(struct can_device_stats);
1192}
1193
1194static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev)
1195{
1196 struct can_priv *priv = netdev_priv(dev);
1197
1198 if (nla_put(skb, IFLA_INFO_XSTATS,
1199 sizeof(priv->can_stats), &priv->can_stats))
1200 goto nla_put_failure;
1201 return 0;
1202
1203nla_put_failure:
1204 return -EMSGSIZE;
1205}
1206
1207static int can_newlink(struct net *src_net, struct net_device *dev,
1208 struct nlattr *tb[], struct nlattr *data[],
1209 struct netlink_ext_ack *extack)
1210{
1211 return -EOPNOTSUPP;
1212}
1213
1214static void can_dellink(struct net_device *dev, struct list_head *head)
1215{
1216}
1217
1218static struct rtnl_link_ops can_link_ops __read_mostly = {
1219 .kind = "can",
1220 .maxtype = IFLA_CAN_MAX,
1221 .policy = can_policy,
1222 .setup = can_setup,
1223 .validate = can_validate,
1224 .newlink = can_newlink,
1225 .changelink = can_changelink,
1226 .dellink = can_dellink,
1227 .get_size = can_get_size,
1228 .fill_info = can_fill_info,
1229 .get_xstats_size = can_get_xstats_size,
1230 .fill_xstats = can_fill_xstats,
1231};
1232
1233/* Register the CAN network device */
1234int register_candev(struct net_device *dev)
1235{
1236 struct can_priv *priv = netdev_priv(dev);
1237
1238 /* Ensure termination_const, termination_const_cnt and
1239 * do_set_termination consistency. All must be either set or
1240 * unset.
1241 */
1242 if ((!priv->termination_const != !priv->termination_const_cnt) ||
1243 (!priv->termination_const != !priv->do_set_termination))
1244 return -EINVAL;
1245
1246 if (!priv->bitrate_const != !priv->bitrate_const_cnt)
1247 return -EINVAL;
1248
1249 if (!priv->data_bitrate_const != !priv->data_bitrate_const_cnt)
1250 return -EINVAL;
1251
1252 dev->rtnl_link_ops = &can_link_ops;
1253 netif_carrier_off(dev);
1254
1255 return register_netdev(dev);
1256}
1257EXPORT_SYMBOL_GPL(register_candev);
1258
1259/* Unregister the CAN network device */
1260void unregister_candev(struct net_device *dev)
1261{
1262 unregister_netdev(dev);
1263}
1264EXPORT_SYMBOL_GPL(unregister_candev);
1265
1266/* Test if a network device is a candev based device
1267 * and return the can_priv* if so.
1268 */
1269struct can_priv *safe_candev_priv(struct net_device *dev)
1270{
1271 if (dev->type != ARPHRD_CAN || dev->rtnl_link_ops != &can_link_ops)
1272 return NULL;
1273
1274 return netdev_priv(dev);
1275}
1276EXPORT_SYMBOL_GPL(safe_candev_priv);
1277
1278static __init int can_dev_init(void)
1279{
1280 int err;
1281
1282 can_led_notifier_init();
1283
1284 err = rtnl_link_register(&can_link_ops);
1285 if (!err)
1286 pr_info(MOD_DESC "\n");
1287
1288 return err;
1289}
1290module_init(can_dev_init);
1291
1292static __exit void can_dev_exit(void)
1293{
1294 rtnl_link_unregister(&can_link_ops);
1295
1296 can_led_notifier_exit();
1297}
1298module_exit(can_dev_exit);
1299
1300MODULE_ALIAS_RTNL_LINK("can");