Loading...
1/*
2 * Support for the S1 button on Routerboard 532
3 *
4 * Copyright (C) 2009 Phil Sutter <n0-1@freewrt.org>
5 */
6
7#include <linux/input-polldev.h>
8#include <linux/module.h>
9#include <linux/platform_device.h>
10
11#include <asm/mach-rc32434/gpio.h>
12#include <asm/mach-rc32434/rb.h>
13
14#define DRV_NAME "rb532-button"
15
16#define RB532_BTN_RATE 100 /* msec */
17#define RB532_BTN_KSYM BTN_0
18
19/* The S1 button state is provided by GPIO pin 1. But as this
20 * pin is also used for uart input as alternate function, the
21 * operational modes must be switched first:
22 * 1) disable uart using set_latch_u5()
23 * 2) turn off alternate function implicitly through
24 * gpio_direction_input()
25 * 3) read the GPIO's current value
26 * 4) undo step 2 by enabling alternate function (in this
27 * mode the GPIO direction is fixed, so no change needed)
28 * 5) turn on uart again
29 * The GPIO value occurs to be inverted, so pin high means
30 * button is not pressed.
31 */
32static bool rb532_button_pressed(void)
33{
34 int val;
35
36 set_latch_u5(0, LO_FOFF);
37 gpio_direction_input(GPIO_BTN_S1);
38
39 val = gpio_get_value(GPIO_BTN_S1);
40
41 rb532_gpio_set_func(GPIO_BTN_S1);
42 set_latch_u5(LO_FOFF, 0);
43
44 return !val;
45}
46
47static void rb532_button_poll(struct input_polled_dev *poll_dev)
48{
49 input_report_key(poll_dev->input, RB532_BTN_KSYM,
50 rb532_button_pressed());
51 input_sync(poll_dev->input);
52}
53
54static int rb532_button_probe(struct platform_device *pdev)
55{
56 struct input_polled_dev *poll_dev;
57 int error;
58
59 poll_dev = input_allocate_polled_device();
60 if (!poll_dev)
61 return -ENOMEM;
62
63 poll_dev->poll = rb532_button_poll;
64 poll_dev->poll_interval = RB532_BTN_RATE;
65
66 poll_dev->input->name = "rb532 button";
67 poll_dev->input->phys = "rb532/button0";
68 poll_dev->input->id.bustype = BUS_HOST;
69 poll_dev->input->dev.parent = &pdev->dev;
70
71 dev_set_drvdata(&pdev->dev, poll_dev);
72
73 input_set_capability(poll_dev->input, EV_KEY, RB532_BTN_KSYM);
74
75 error = input_register_polled_device(poll_dev);
76 if (error) {
77 input_free_polled_device(poll_dev);
78 return error;
79 }
80
81 return 0;
82}
83
84static int rb532_button_remove(struct platform_device *pdev)
85{
86 struct input_polled_dev *poll_dev = dev_get_drvdata(&pdev->dev);
87
88 input_unregister_polled_device(poll_dev);
89 input_free_polled_device(poll_dev);
90
91 return 0;
92}
93
94static struct platform_driver rb532_button_driver = {
95 .probe = rb532_button_probe,
96 .remove = rb532_button_remove,
97 .driver = {
98 .name = DRV_NAME,
99 .owner = THIS_MODULE,
100 },
101};
102module_platform_driver(rb532_button_driver);
103
104MODULE_AUTHOR("Phil Sutter <n0-1@freewrt.org>");
105MODULE_LICENSE("GPL");
106MODULE_DESCRIPTION("Support for S1 button on Routerboard 532");
107MODULE_ALIAS("platform:" DRV_NAME);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Support for the S1 button on Routerboard 532
4 *
5 * Copyright (C) 2009 Phil Sutter <n0-1@freewrt.org>
6 */
7
8#include <linux/input-polldev.h>
9#include <linux/module.h>
10#include <linux/platform_device.h>
11#include <linux/gpio.h>
12
13#include <asm/mach-rc32434/gpio.h>
14#include <asm/mach-rc32434/rb.h>
15
16#define DRV_NAME "rb532-button"
17
18#define RB532_BTN_RATE 100 /* msec */
19#define RB532_BTN_KSYM BTN_0
20
21/* The S1 button state is provided by GPIO pin 1. But as this
22 * pin is also used for uart input as alternate function, the
23 * operational modes must be switched first:
24 * 1) disable uart using set_latch_u5()
25 * 2) turn off alternate function implicitly through
26 * gpio_direction_input()
27 * 3) read the GPIO's current value
28 * 4) undo step 2 by enabling alternate function (in this
29 * mode the GPIO direction is fixed, so no change needed)
30 * 5) turn on uart again
31 * The GPIO value occurs to be inverted, so pin high means
32 * button is not pressed.
33 */
34static bool rb532_button_pressed(void)
35{
36 int val;
37
38 set_latch_u5(0, LO_FOFF);
39 gpio_direction_input(GPIO_BTN_S1);
40
41 val = gpio_get_value(GPIO_BTN_S1);
42
43 rb532_gpio_set_func(GPIO_BTN_S1);
44 set_latch_u5(LO_FOFF, 0);
45
46 return !val;
47}
48
49static void rb532_button_poll(struct input_polled_dev *poll_dev)
50{
51 input_report_key(poll_dev->input, RB532_BTN_KSYM,
52 rb532_button_pressed());
53 input_sync(poll_dev->input);
54}
55
56static int rb532_button_probe(struct platform_device *pdev)
57{
58 struct input_polled_dev *poll_dev;
59 int error;
60
61 poll_dev = input_allocate_polled_device();
62 if (!poll_dev)
63 return -ENOMEM;
64
65 poll_dev->poll = rb532_button_poll;
66 poll_dev->poll_interval = RB532_BTN_RATE;
67
68 poll_dev->input->name = "rb532 button";
69 poll_dev->input->phys = "rb532/button0";
70 poll_dev->input->id.bustype = BUS_HOST;
71 poll_dev->input->dev.parent = &pdev->dev;
72
73 dev_set_drvdata(&pdev->dev, poll_dev);
74
75 input_set_capability(poll_dev->input, EV_KEY, RB532_BTN_KSYM);
76
77 error = input_register_polled_device(poll_dev);
78 if (error) {
79 input_free_polled_device(poll_dev);
80 return error;
81 }
82
83 return 0;
84}
85
86static int rb532_button_remove(struct platform_device *pdev)
87{
88 struct input_polled_dev *poll_dev = dev_get_drvdata(&pdev->dev);
89
90 input_unregister_polled_device(poll_dev);
91 input_free_polled_device(poll_dev);
92
93 return 0;
94}
95
96static struct platform_driver rb532_button_driver = {
97 .probe = rb532_button_probe,
98 .remove = rb532_button_remove,
99 .driver = {
100 .name = DRV_NAME,
101 },
102};
103module_platform_driver(rb532_button_driver);
104
105MODULE_AUTHOR("Phil Sutter <n0-1@freewrt.org>");
106MODULE_LICENSE("GPL");
107MODULE_DESCRIPTION("Support for S1 button on Routerboard 532");
108MODULE_ALIAS("platform:" DRV_NAME);