Loading...
Note: File does not exist in v3.15.
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
4 */
5
6#ifndef _CORESIGHT_CORESIGHT_ETM_H
7#define _CORESIGHT_CORESIGHT_ETM_H
8
9#include <asm/local.h>
10#include <linux/spinlock.h>
11#include "coresight-priv.h"
12
13/*
14 * Device registers:
15 * 0x000 - 0x2FC: Trace registers
16 * 0x300 - 0x314: Management registers
17 * 0x318 - 0xEFC: Trace registers
18 * 0xF00: Management registers
19 * 0xFA0 - 0xFA4: Trace registers
20 * 0xFA8 - 0xFFC: Management registers
21 */
22/* Trace registers (0x000-0x2FC) */
23/* Main control and configuration registers */
24#define TRCPRGCTLR 0x004
25#define TRCPROCSELR 0x008
26#define TRCSTATR 0x00C
27#define TRCCONFIGR 0x010
28#define TRCAUXCTLR 0x018
29#define TRCEVENTCTL0R 0x020
30#define TRCEVENTCTL1R 0x024
31#define TRCSTALLCTLR 0x02C
32#define TRCTSCTLR 0x030
33#define TRCSYNCPR 0x034
34#define TRCCCCTLR 0x038
35#define TRCBBCTLR 0x03C
36#define TRCTRACEIDR 0x040
37#define TRCQCTLR 0x044
38/* Filtering control registers */
39#define TRCVICTLR 0x080
40#define TRCVIIECTLR 0x084
41#define TRCVISSCTLR 0x088
42#define TRCVIPCSSCTLR 0x08C
43#define TRCVDCTLR 0x0A0
44#define TRCVDSACCTLR 0x0A4
45#define TRCVDARCCTLR 0x0A8
46/* Derived resources registers */
47#define TRCSEQEVRn(n) (0x100 + (n * 4))
48#define TRCSEQRSTEVR 0x118
49#define TRCSEQSTR 0x11C
50#define TRCEXTINSELR 0x120
51#define TRCCNTRLDVRn(n) (0x140 + (n * 4))
52#define TRCCNTCTLRn(n) (0x150 + (n * 4))
53#define TRCCNTVRn(n) (0x160 + (n * 4))
54/* ID registers */
55#define TRCIDR8 0x180
56#define TRCIDR9 0x184
57#define TRCIDR10 0x188
58#define TRCIDR11 0x18C
59#define TRCIDR12 0x190
60#define TRCIDR13 0x194
61#define TRCIMSPEC0 0x1C0
62#define TRCIMSPECn(n) (0x1C0 + (n * 4))
63#define TRCIDR0 0x1E0
64#define TRCIDR1 0x1E4
65#define TRCIDR2 0x1E8
66#define TRCIDR3 0x1EC
67#define TRCIDR4 0x1F0
68#define TRCIDR5 0x1F4
69#define TRCIDR6 0x1F8
70#define TRCIDR7 0x1FC
71/* Resource selection registers */
72#define TRCRSCTLRn(n) (0x200 + (n * 4))
73/* Single-shot comparator registers */
74#define TRCSSCCRn(n) (0x280 + (n * 4))
75#define TRCSSCSRn(n) (0x2A0 + (n * 4))
76#define TRCSSPCICRn(n) (0x2C0 + (n * 4))
77/* Management registers (0x300-0x314) */
78#define TRCOSLAR 0x300
79#define TRCOSLSR 0x304
80#define TRCPDCR 0x310
81#define TRCPDSR 0x314
82/* Trace registers (0x318-0xEFC) */
83/* Comparator registers */
84#define TRCACVRn(n) (0x400 + (n * 8))
85#define TRCACATRn(n) (0x480 + (n * 8))
86#define TRCDVCVRn(n) (0x500 + (n * 16))
87#define TRCDVCMRn(n) (0x580 + (n * 16))
88#define TRCCIDCVRn(n) (0x600 + (n * 8))
89#define TRCVMIDCVRn(n) (0x640 + (n * 8))
90#define TRCCIDCCTLR0 0x680
91#define TRCCIDCCTLR1 0x684
92#define TRCVMIDCCTLR0 0x688
93#define TRCVMIDCCTLR1 0x68C
94/* Management register (0xF00) */
95/* Integration control registers */
96#define TRCITCTRL 0xF00
97/* Trace registers (0xFA0-0xFA4) */
98/* Claim tag registers */
99#define TRCCLAIMSET 0xFA0
100#define TRCCLAIMCLR 0xFA4
101/* Management registers (0xFA8-0xFFC) */
102#define TRCDEVAFF0 0xFA8
103#define TRCDEVAFF1 0xFAC
104#define TRCLAR 0xFB0
105#define TRCLSR 0xFB4
106#define TRCAUTHSTATUS 0xFB8
107#define TRCDEVARCH 0xFBC
108#define TRCDEVID 0xFC8
109#define TRCDEVTYPE 0xFCC
110#define TRCPIDR4 0xFD0
111#define TRCPIDR5 0xFD4
112#define TRCPIDR6 0xFD8
113#define TRCPIDR7 0xFDC
114#define TRCPIDR0 0xFE0
115#define TRCPIDR1 0xFE4
116#define TRCPIDR2 0xFE8
117#define TRCPIDR3 0xFEC
118#define TRCCIDR0 0xFF0
119#define TRCCIDR1 0xFF4
120#define TRCCIDR2 0xFF8
121#define TRCCIDR3 0xFFC
122
123/* ETMv4 resources */
124#define ETM_MAX_NR_PE 8
125#define ETMv4_MAX_CNTR 4
126#define ETM_MAX_SEQ_STATES 4
127#define ETM_MAX_EXT_INP_SEL 4
128#define ETM_MAX_EXT_INP 256
129#define ETM_MAX_EXT_OUT 4
130#define ETM_MAX_SINGLE_ADDR_CMP 16
131#define ETM_MAX_ADDR_RANGE_CMP (ETM_MAX_SINGLE_ADDR_CMP / 2)
132#define ETM_MAX_DATA_VAL_CMP 8
133#define ETMv4_MAX_CTXID_CMP 8
134#define ETM_MAX_VMID_CMP 8
135#define ETM_MAX_PE_CMP 8
136#define ETM_MAX_RES_SEL 16
137#define ETM_MAX_SS_CMP 8
138
139#define ETM_ARCH_V4 0x40
140#define ETMv4_SYNC_MASK 0x1F
141#define ETM_CYC_THRESHOLD_MASK 0xFFF
142#define ETM_CYC_THRESHOLD_DEFAULT 0x100
143#define ETMv4_EVENT_MASK 0xFF
144#define ETM_CNTR_MAX_VAL 0xFFFF
145#define ETM_TRACEID_MASK 0x3f
146
147/* ETMv4 programming modes */
148#define ETM_MODE_EXCLUDE BIT(0)
149#define ETM_MODE_LOAD BIT(1)
150#define ETM_MODE_STORE BIT(2)
151#define ETM_MODE_LOAD_STORE BIT(3)
152#define ETM_MODE_BB BIT(4)
153#define ETMv4_MODE_CYCACC BIT(5)
154#define ETMv4_MODE_CTXID BIT(6)
155#define ETM_MODE_VMID BIT(7)
156#define ETM_MODE_COND(val) BMVAL(val, 8, 10)
157#define ETMv4_MODE_TIMESTAMP BIT(11)
158#define ETM_MODE_RETURNSTACK BIT(12)
159#define ETM_MODE_QELEM(val) BMVAL(val, 13, 14)
160#define ETM_MODE_DATA_TRACE_ADDR BIT(15)
161#define ETM_MODE_DATA_TRACE_VAL BIT(16)
162#define ETM_MODE_ISTALL BIT(17)
163#define ETM_MODE_DSTALL BIT(18)
164#define ETM_MODE_ATB_TRIGGER BIT(19)
165#define ETM_MODE_LPOVERRIDE BIT(20)
166#define ETM_MODE_ISTALL_EN BIT(21)
167#define ETM_MODE_DSTALL_EN BIT(22)
168#define ETM_MODE_INSTPRIO BIT(23)
169#define ETM_MODE_NOOVERFLOW BIT(24)
170#define ETM_MODE_TRACE_RESET BIT(25)
171#define ETM_MODE_TRACE_ERR BIT(26)
172#define ETM_MODE_VIEWINST_STARTSTOP BIT(27)
173#define ETMv4_MODE_ALL (GENMASK(27, 0) | \
174 ETM_MODE_EXCL_KERN | \
175 ETM_MODE_EXCL_USER)
176
177#define TRCSTATR_IDLE_BIT 0
178#define ETM_DEFAULT_ADDR_COMP 0
179
180/* PowerDown Control Register bits */
181#define TRCPDCR_PU BIT(3)
182
183/* secure state access levels */
184#define ETM_EXLEVEL_S_APP BIT(8)
185#define ETM_EXLEVEL_S_OS BIT(9)
186#define ETM_EXLEVEL_S_NA BIT(10)
187#define ETM_EXLEVEL_S_HYP BIT(11)
188/* non-secure state access levels */
189#define ETM_EXLEVEL_NS_APP BIT(12)
190#define ETM_EXLEVEL_NS_OS BIT(13)
191#define ETM_EXLEVEL_NS_HYP BIT(14)
192#define ETM_EXLEVEL_NS_NA BIT(15)
193
194/**
195 * struct etmv4_config - configuration information related to an ETMv4
196 * @mode: Controls various modes supported by this ETM.
197 * @pe_sel: Controls which PE to trace.
198 * @cfg: Controls the tracing options.
199 * @eventctrl0: Controls the tracing of arbitrary events.
200 * @eventctrl1: Controls the behavior of the events that @event_ctrl0 selects.
201 * @stallctl: If functionality that prevents trace unit buffer overflows
202 * is available.
203 * @ts_ctrl: Controls the insertion of global timestamps in the
204 * trace streams.
205 * @syncfreq: Controls how often trace synchronization requests occur.
206 * the TRCCCCTLR register.
207 * @ccctlr: Sets the threshold value for cycle counting.
208 * @vinst_ctrl: Controls instruction trace filtering.
209 * @viiectlr: Set or read, the address range comparators.
210 * @vissctlr: Set, or read, the single address comparators that control the
211 * ViewInst start-stop logic.
212 * @vipcssctlr: Set, or read, which PE comparator inputs can control the
213 * ViewInst start-stop logic.
214 * @seq_idx: Sequencor index selector.
215 * @seq_ctrl: Control for the sequencer state transition control register.
216 * @seq_rst: Moves the sequencer to state 0 when a programmed event occurs.
217 * @seq_state: Set, or read the sequencer state.
218 * @cntr_idx: Counter index seletor.
219 * @cntrldvr: Sets or returns the reload count value for a counter.
220 * @cntr_ctrl: Controls the operation of a counter.
221 * @cntr_val: Sets or returns the value for a counter.
222 * @res_idx: Resource index selector.
223 * @res_ctrl: Controls the selection of the resources in the trace unit.
224 * @ss_ctrl: Controls the corresponding single-shot comparator resource.
225 * @ss_status: The status of the corresponding single-shot comparator.
226 * @ss_pe_cmp: Selects the PE comparator inputs for Single-shot control.
227 * @addr_idx: Address comparator index selector.
228 * @addr_val: Value for address comparator.
229 * @addr_acc: Address comparator access type.
230 * @addr_type: Current status of the comparator register.
231 * @ctxid_idx: Context ID index selector.
232 * @ctxid_pid: Value of the context ID comparator.
233 * @ctxid_mask0:Context ID comparator mask for comparator 0-3.
234 * @ctxid_mask1:Context ID comparator mask for comparator 4-7.
235 * @vmid_idx: VM ID index selector.
236 * @vmid_val: Value of the VM ID comparator.
237 * @vmid_mask0: VM ID comparator mask for comparator 0-3.
238 * @vmid_mask1: VM ID comparator mask for comparator 4-7.
239 * @ext_inp: External input selection.
240 */
241struct etmv4_config {
242 u32 mode;
243 u32 pe_sel;
244 u32 cfg;
245 u32 eventctrl0;
246 u32 eventctrl1;
247 u32 stall_ctrl;
248 u32 ts_ctrl;
249 u32 syncfreq;
250 u32 ccctlr;
251 u32 bb_ctrl;
252 u32 vinst_ctrl;
253 u32 viiectlr;
254 u32 vissctlr;
255 u32 vipcssctlr;
256 u8 seq_idx;
257 u32 seq_ctrl[ETM_MAX_SEQ_STATES];
258 u32 seq_rst;
259 u32 seq_state;
260 u8 cntr_idx;
261 u32 cntrldvr[ETMv4_MAX_CNTR];
262 u32 cntr_ctrl[ETMv4_MAX_CNTR];
263 u32 cntr_val[ETMv4_MAX_CNTR];
264 u8 res_idx;
265 u32 res_ctrl[ETM_MAX_RES_SEL];
266 u32 ss_ctrl[ETM_MAX_SS_CMP];
267 u32 ss_status[ETM_MAX_SS_CMP];
268 u32 ss_pe_cmp[ETM_MAX_SS_CMP];
269 u8 addr_idx;
270 u64 addr_val[ETM_MAX_SINGLE_ADDR_CMP];
271 u64 addr_acc[ETM_MAX_SINGLE_ADDR_CMP];
272 u8 addr_type[ETM_MAX_SINGLE_ADDR_CMP];
273 u8 ctxid_idx;
274 u64 ctxid_pid[ETMv4_MAX_CTXID_CMP];
275 u32 ctxid_mask0;
276 u32 ctxid_mask1;
277 u8 vmid_idx;
278 u64 vmid_val[ETM_MAX_VMID_CMP];
279 u32 vmid_mask0;
280 u32 vmid_mask1;
281 u32 ext_inp;
282};
283
284/**
285 * struct etm4_drvdata - specifics associated to an ETM component
286 * @base: Memory mapped base address for this component.
287 * @csdev: Component vitals needed by the framework.
288 * @spinlock: Only one at a time pls.
289 * @mode: This tracer's mode, i.e sysFS, Perf or disabled.
290 * @cpu: The cpu this component is affined to.
291 * @arch: ETM version number.
292 * @nr_pe: The number of processing entity available for tracing.
293 * @nr_pe_cmp: The number of processing entity comparator inputs that are
294 * available for tracing.
295 * @nr_addr_cmp:Number of pairs of address comparators available
296 * as found in ETMIDR4 0-3.
297 * @nr_cntr: Number of counters as found in ETMIDR5 bit 28-30.
298 * @nr_ext_inp: Number of external input.
299 * @numcidc: Number of contextID comparators.
300 * @numvmidc: Number of VMID comparators.
301 * @nrseqstate: The number of sequencer states that are implemented.
302 * @nr_event: Indicates how many events the trace unit support.
303 * @nr_resource:The number of resource selection pairs available for tracing.
304 * @nr_ss_cmp: Number of single-shot comparator controls that are available.
305 * @trcid: value of the current ID for this component.
306 * @trcid_size: Indicates the trace ID width.
307 * @ts_size: Global timestamp size field.
308 * @ctxid_size: Size of the context ID field to consider.
309 * @vmid_size: Size of the VM ID comparator to consider.
310 * @ccsize: Indicates the size of the cycle counter in bits.
311 * @ccitmin: minimum value that can be programmed in
312 * @s_ex_level: In secure state, indicates whether instruction tracing is
313 * supported for the corresponding Exception level.
314 * @ns_ex_level:In non-secure state, indicates whether instruction tracing is
315 * supported for the corresponding Exception level.
316 * @sticky_enable: true if ETM base configuration has been done.
317 * @boot_enable:True if we should start tracing at boot time.
318 * @os_unlock: True if access to management registers is allowed.
319 * @instrp0: Tracing of load and store instructions
320 * as P0 elements is supported.
321 * @trcbb: Indicates if the trace unit supports branch broadcast tracing.
322 * @trccond: If the trace unit supports conditional
323 * instruction tracing.
324 * @retstack: Indicates if the implementation supports a return stack.
325 * @trccci: Indicates if the trace unit supports cycle counting
326 * for instruction.
327 * @q_support: Q element support characteristics.
328 * @trc_error: Whether a trace unit can trace a system
329 * error exception.
330 * @syncpr: Indicates if an implementation has a fixed
331 * synchronization period.
332 * @stall_ctrl: Enables trace unit functionality that prevents trace
333 * unit buffer overflows.
334 * @sysstall: Does the system support stall control of the PE?
335 * @nooverflow: Indicate if overflow prevention is supported.
336 * @atbtrig: If the implementation can support ATB triggers
337 * @lpoverride: If the implementation can support low-power state over.
338 * @config: structure holding configuration parameters.
339 */
340struct etmv4_drvdata {
341 void __iomem *base;
342 struct coresight_device *csdev;
343 spinlock_t spinlock;
344 local_t mode;
345 int cpu;
346 u8 arch;
347 u8 nr_pe;
348 u8 nr_pe_cmp;
349 u8 nr_addr_cmp;
350 u8 nr_cntr;
351 u8 nr_ext_inp;
352 u8 numcidc;
353 u8 numvmidc;
354 u8 nrseqstate;
355 u8 nr_event;
356 u8 nr_resource;
357 u8 nr_ss_cmp;
358 u8 trcid;
359 u8 trcid_size;
360 u8 ts_size;
361 u8 ctxid_size;
362 u8 vmid_size;
363 u8 ccsize;
364 u8 ccitmin;
365 u8 s_ex_level;
366 u8 ns_ex_level;
367 u8 q_support;
368 bool sticky_enable;
369 bool boot_enable;
370 bool os_unlock;
371 bool instrp0;
372 bool trcbb;
373 bool trccond;
374 bool retstack;
375 bool trccci;
376 bool trc_error;
377 bool syncpr;
378 bool stallctl;
379 bool sysstall;
380 bool nooverflow;
381 bool atbtrig;
382 bool lpoverride;
383 struct etmv4_config config;
384};
385
386/* Address comparator access types */
387enum etm_addr_acctype {
388 ETM_INSTR_ADDR,
389 ETM_DATA_LOAD_ADDR,
390 ETM_DATA_STORE_ADDR,
391 ETM_DATA_LOAD_STORE_ADDR,
392};
393
394/* Address comparator context types */
395enum etm_addr_ctxtype {
396 ETM_CTX_NONE,
397 ETM_CTX_CTXID,
398 ETM_CTX_VMID,
399 ETM_CTX_CTXID_VMID,
400};
401
402extern const struct attribute_group *coresight_etmv4_groups[];
403void etm4_config_trace_mode(struct etmv4_config *config);
404#endif