Loading...
1/*
2 * ASIX AX88172A based USB 2.0 Ethernet Devices
3 * Copyright (C) 2012 OMICRON electronics GmbH
4 *
5 * Supports external PHYs via phylib. Based on the driver for the
6 * AX88772. Original copyrights follow:
7 *
8 * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
9 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
10 * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
11 * Copyright (c) 2002-2003 TiVo Inc.
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, see <http://www.gnu.org/licenses/>.
25 */
26
27#include "asix.h"
28#include <linux/phy.h>
29
30struct ax88172a_private {
31 struct mii_bus *mdio;
32 struct phy_device *phydev;
33 char phy_name[20];
34 u16 phy_addr;
35 u16 oldmode;
36 int use_embdphy;
37 struct asix_rx_fixup_info rx_fixup_info;
38};
39
40/* MDIO read and write wrappers for phylib */
41static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
42{
43 return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id,
44 regnum);
45}
46
47static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum,
48 u16 val)
49{
50 asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val);
51 return 0;
52}
53
54static int ax88172a_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
55{
56 if (!netif_running(net))
57 return -EINVAL;
58
59 if (!net->phydev)
60 return -ENODEV;
61
62 return phy_mii_ioctl(net->phydev, rq, cmd);
63}
64
65/* set MAC link settings according to information from phylib */
66static void ax88172a_adjust_link(struct net_device *netdev)
67{
68 struct phy_device *phydev = netdev->phydev;
69 struct usbnet *dev = netdev_priv(netdev);
70 struct ax88172a_private *priv = dev->driver_priv;
71 u16 mode = 0;
72
73 if (phydev->link) {
74 mode = AX88772_MEDIUM_DEFAULT;
75
76 if (phydev->duplex == DUPLEX_HALF)
77 mode &= ~AX_MEDIUM_FD;
78
79 if (phydev->speed != SPEED_100)
80 mode &= ~AX_MEDIUM_PS;
81 }
82
83 if (mode != priv->oldmode) {
84 asix_write_medium_mode(dev, mode);
85 priv->oldmode = mode;
86 netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
87 phydev->speed, phydev->duplex, mode);
88 phy_print_status(phydev);
89 }
90}
91
92static void ax88172a_status(struct usbnet *dev, struct urb *urb)
93{
94 /* link changes are detected by polling the phy */
95}
96
97/* use phylib infrastructure */
98static int ax88172a_init_mdio(struct usbnet *dev)
99{
100 struct ax88172a_private *priv = dev->driver_priv;
101 int ret, i;
102
103 priv->mdio = mdiobus_alloc();
104 if (!priv->mdio) {
105 netdev_err(dev->net, "Could not allocate MDIO bus\n");
106 return -ENOMEM;
107 }
108
109 priv->mdio->priv = (void *)dev;
110 priv->mdio->read = &asix_mdio_bus_read;
111 priv->mdio->write = &asix_mdio_bus_write;
112 priv->mdio->name = "Asix MDIO Bus";
113 /* mii bus name is usb-<usb bus number>-<usb device number> */
114 snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
115 dev->udev->bus->busnum, dev->udev->devnum);
116
117 priv->mdio->irq = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
118 if (!priv->mdio->irq) {
119 ret = -ENOMEM;
120 goto mfree;
121 }
122 for (i = 0; i < PHY_MAX_ADDR; i++)
123 priv->mdio->irq[i] = PHY_POLL;
124
125 ret = mdiobus_register(priv->mdio);
126 if (ret) {
127 netdev_err(dev->net, "Could not register MDIO bus\n");
128 goto ifree;
129 }
130
131 netdev_info(dev->net, "registered mdio bus %s\n", priv->mdio->id);
132 return 0;
133
134ifree:
135 kfree(priv->mdio->irq);
136mfree:
137 mdiobus_free(priv->mdio);
138 return ret;
139}
140
141static void ax88172a_remove_mdio(struct usbnet *dev)
142{
143 struct ax88172a_private *priv = dev->driver_priv;
144
145 netdev_info(dev->net, "deregistering mdio bus %s\n", priv->mdio->id);
146 mdiobus_unregister(priv->mdio);
147 kfree(priv->mdio->irq);
148 mdiobus_free(priv->mdio);
149}
150
151static const struct net_device_ops ax88172a_netdev_ops = {
152 .ndo_open = usbnet_open,
153 .ndo_stop = usbnet_stop,
154 .ndo_start_xmit = usbnet_start_xmit,
155 .ndo_tx_timeout = usbnet_tx_timeout,
156 .ndo_change_mtu = usbnet_change_mtu,
157 .ndo_set_mac_address = asix_set_mac_address,
158 .ndo_validate_addr = eth_validate_addr,
159 .ndo_do_ioctl = ax88172a_ioctl,
160 .ndo_set_rx_mode = asix_set_multicast,
161};
162
163static int ax88172a_get_settings(struct net_device *net,
164 struct ethtool_cmd *cmd)
165{
166 if (!net->phydev)
167 return -ENODEV;
168
169 return phy_ethtool_gset(net->phydev, cmd);
170}
171
172static int ax88172a_set_settings(struct net_device *net,
173 struct ethtool_cmd *cmd)
174{
175 if (!net->phydev)
176 return -ENODEV;
177
178 return phy_ethtool_sset(net->phydev, cmd);
179}
180
181static int ax88172a_nway_reset(struct net_device *net)
182{
183 if (!net->phydev)
184 return -ENODEV;
185
186 return phy_start_aneg(net->phydev);
187}
188
189static const struct ethtool_ops ax88172a_ethtool_ops = {
190 .get_drvinfo = asix_get_drvinfo,
191 .get_link = usbnet_get_link,
192 .get_msglevel = usbnet_get_msglevel,
193 .set_msglevel = usbnet_set_msglevel,
194 .get_wol = asix_get_wol,
195 .set_wol = asix_set_wol,
196 .get_eeprom_len = asix_get_eeprom_len,
197 .get_eeprom = asix_get_eeprom,
198 .set_eeprom = asix_set_eeprom,
199 .get_settings = ax88172a_get_settings,
200 .set_settings = ax88172a_set_settings,
201 .nway_reset = ax88172a_nway_reset,
202};
203
204static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
205{
206 int ret;
207
208 ret = asix_sw_reset(dev, AX_SWRESET_IPPD);
209 if (ret < 0)
210 goto err;
211
212 msleep(150);
213 ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
214 if (ret < 0)
215 goto err;
216
217 msleep(150);
218
219 ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD);
220 if (ret < 0)
221 goto err;
222
223 return 0;
224
225err:
226 return ret;
227}
228
229
230static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
231{
232 int ret;
233 u8 buf[ETH_ALEN];
234 struct ax88172a_private *priv;
235
236 usbnet_get_endpoints(dev, intf);
237
238 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
239 if (!priv)
240 return -ENOMEM;
241
242 dev->driver_priv = priv;
243
244 /* Get the MAC address */
245 ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
246 if (ret < 0) {
247 netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
248 goto free;
249 }
250 memcpy(dev->net->dev_addr, buf, ETH_ALEN);
251
252 dev->net->netdev_ops = &ax88172a_netdev_ops;
253 dev->net->ethtool_ops = &ax88172a_ethtool_ops;
254
255 /* are we using the internal or the external phy? */
256 ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf);
257 if (ret < 0) {
258 netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
259 ret);
260 goto free;
261 }
262
263 netdev_dbg(dev->net, "AX_CMD_SW_PHY_STATUS = 0x%02x\n", buf[0]);
264 switch (buf[0] & AX_PHY_SELECT_MASK) {
265 case AX_PHY_SELECT_INTERNAL:
266 netdev_dbg(dev->net, "use internal phy\n");
267 priv->use_embdphy = 1;
268 break;
269 case AX_PHY_SELECT_EXTERNAL:
270 netdev_dbg(dev->net, "use external phy\n");
271 priv->use_embdphy = 0;
272 break;
273 default:
274 netdev_err(dev->net, "Interface mode not supported by driver\n");
275 ret = -ENOTSUPP;
276 goto free;
277 }
278
279 priv->phy_addr = asix_read_phy_addr(dev, priv->use_embdphy);
280 ax88172a_reset_phy(dev, priv->use_embdphy);
281
282 /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
283 if (dev->driver_info->flags & FLAG_FRAMING_AX) {
284 /* hard_mtu is still the default - the device does not support
285 jumbo eth frames */
286 dev->rx_urb_size = 2048;
287 }
288
289 /* init MDIO bus */
290 ret = ax88172a_init_mdio(dev);
291 if (ret)
292 goto free;
293
294 return 0;
295
296free:
297 kfree(priv);
298 return ret;
299}
300
301static int ax88172a_stop(struct usbnet *dev)
302{
303 struct ax88172a_private *priv = dev->driver_priv;
304
305 netdev_dbg(dev->net, "Stopping interface\n");
306
307 if (priv->phydev) {
308 netdev_info(dev->net, "Disconnecting from phy %s\n",
309 priv->phy_name);
310 phy_stop(priv->phydev);
311 phy_disconnect(priv->phydev);
312 }
313
314 return 0;
315}
316
317static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf)
318{
319 struct ax88172a_private *priv = dev->driver_priv;
320
321 ax88172a_remove_mdio(dev);
322 kfree(priv);
323}
324
325static int ax88172a_reset(struct usbnet *dev)
326{
327 struct asix_data *data = (struct asix_data *)&dev->data;
328 struct ax88172a_private *priv = dev->driver_priv;
329 int ret;
330 u16 rx_ctl;
331
332 ax88172a_reset_phy(dev, priv->use_embdphy);
333
334 msleep(150);
335 rx_ctl = asix_read_rx_ctl(dev);
336 netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
337 ret = asix_write_rx_ctl(dev, 0x0000);
338 if (ret < 0)
339 goto out;
340
341 rx_ctl = asix_read_rx_ctl(dev);
342 netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
343
344 msleep(150);
345
346 ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
347 AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
348 AX88772_IPG2_DEFAULT, 0, NULL);
349 if (ret < 0) {
350 netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
351 goto out;
352 }
353
354 /* Rewrite MAC address */
355 memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
356 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
357 data->mac_addr);
358 if (ret < 0)
359 goto out;
360
361 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
362 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL);
363 if (ret < 0)
364 goto out;
365
366 rx_ctl = asix_read_rx_ctl(dev);
367 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
368 rx_ctl);
369
370 rx_ctl = asix_read_medium_status(dev);
371 netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
372 rx_ctl);
373
374 /* Connect to PHY */
375 snprintf(priv->phy_name, 20, PHY_ID_FMT,
376 priv->mdio->id, priv->phy_addr);
377
378 priv->phydev = phy_connect(dev->net, priv->phy_name,
379 &ax88172a_adjust_link,
380 PHY_INTERFACE_MODE_MII);
381 if (IS_ERR(priv->phydev)) {
382 netdev_err(dev->net, "Could not connect to PHY device %s\n",
383 priv->phy_name);
384 ret = PTR_ERR(priv->phydev);
385 goto out;
386 }
387
388 netdev_info(dev->net, "Connected to phy %s\n", priv->phy_name);
389
390 /* During power-up, the AX88172A set the power down (BMCR_PDOWN)
391 * bit of the PHY. Bring the PHY up again.
392 */
393 genphy_resume(priv->phydev);
394 phy_start(priv->phydev);
395
396 return 0;
397
398out:
399 return ret;
400
401}
402
403static int ax88172a_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
404{
405 struct ax88172a_private *dp = dev->driver_priv;
406 struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
407
408 return asix_rx_fixup_internal(dev, skb, rx);
409}
410
411const struct driver_info ax88172a_info = {
412 .description = "ASIX AX88172A USB 2.0 Ethernet",
413 .bind = ax88172a_bind,
414 .reset = ax88172a_reset,
415 .stop = ax88172a_stop,
416 .unbind = ax88172a_unbind,
417 .status = ax88172a_status,
418 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
419 FLAG_MULTI_PACKET,
420 .rx_fixup = ax88172a_rx_fixup,
421 .tx_fixup = asix_tx_fixup,
422};
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * ASIX AX88172A based USB 2.0 Ethernet Devices
4 * Copyright (C) 2012 OMICRON electronics GmbH
5 *
6 * Supports external PHYs via phylib. Based on the driver for the
7 * AX88772. Original copyrights follow:
8 *
9 * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
10 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
11 * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
12 * Copyright (c) 2002-2003 TiVo Inc.
13 */
14
15#include "asix.h"
16#include <linux/phy.h>
17
18struct ax88172a_private {
19 struct mii_bus *mdio;
20 struct phy_device *phydev;
21 char phy_name[20];
22 u16 phy_addr;
23 u16 oldmode;
24 int use_embdphy;
25 struct asix_rx_fixup_info rx_fixup_info;
26};
27
28/* MDIO read and write wrappers for phylib */
29static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
30{
31 return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id,
32 regnum);
33}
34
35static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum,
36 u16 val)
37{
38 asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val);
39 return 0;
40}
41
42static int ax88172a_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
43{
44 if (!netif_running(net))
45 return -EINVAL;
46
47 if (!net->phydev)
48 return -ENODEV;
49
50 return phy_mii_ioctl(net->phydev, rq, cmd);
51}
52
53/* set MAC link settings according to information from phylib */
54static void ax88172a_adjust_link(struct net_device *netdev)
55{
56 struct phy_device *phydev = netdev->phydev;
57 struct usbnet *dev = netdev_priv(netdev);
58 struct ax88172a_private *priv = dev->driver_priv;
59 u16 mode = 0;
60
61 if (phydev->link) {
62 mode = AX88772_MEDIUM_DEFAULT;
63
64 if (phydev->duplex == DUPLEX_HALF)
65 mode &= ~AX_MEDIUM_FD;
66
67 if (phydev->speed != SPEED_100)
68 mode &= ~AX_MEDIUM_PS;
69 }
70
71 if (mode != priv->oldmode) {
72 asix_write_medium_mode(dev, mode, 0);
73 priv->oldmode = mode;
74 netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
75 phydev->speed, phydev->duplex, mode);
76 phy_print_status(phydev);
77 }
78}
79
80static void ax88172a_status(struct usbnet *dev, struct urb *urb)
81{
82 /* link changes are detected by polling the phy */
83}
84
85/* use phylib infrastructure */
86static int ax88172a_init_mdio(struct usbnet *dev)
87{
88 struct ax88172a_private *priv = dev->driver_priv;
89 int ret;
90
91 priv->mdio = mdiobus_alloc();
92 if (!priv->mdio) {
93 netdev_err(dev->net, "Could not allocate MDIO bus\n");
94 return -ENOMEM;
95 }
96
97 priv->mdio->priv = (void *)dev;
98 priv->mdio->read = &asix_mdio_bus_read;
99 priv->mdio->write = &asix_mdio_bus_write;
100 priv->mdio->name = "Asix MDIO Bus";
101 /* mii bus name is usb-<usb bus number>-<usb device number> */
102 snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
103 dev->udev->bus->busnum, dev->udev->devnum);
104
105 ret = mdiobus_register(priv->mdio);
106 if (ret) {
107 netdev_err(dev->net, "Could not register MDIO bus\n");
108 goto mfree;
109 }
110
111 netdev_info(dev->net, "registered mdio bus %s\n", priv->mdio->id);
112 return 0;
113
114mfree:
115 mdiobus_free(priv->mdio);
116 return ret;
117}
118
119static void ax88172a_remove_mdio(struct usbnet *dev)
120{
121 struct ax88172a_private *priv = dev->driver_priv;
122
123 netdev_info(dev->net, "deregistering mdio bus %s\n", priv->mdio->id);
124 mdiobus_unregister(priv->mdio);
125 mdiobus_free(priv->mdio);
126}
127
128static const struct net_device_ops ax88172a_netdev_ops = {
129 .ndo_open = usbnet_open,
130 .ndo_stop = usbnet_stop,
131 .ndo_start_xmit = usbnet_start_xmit,
132 .ndo_tx_timeout = usbnet_tx_timeout,
133 .ndo_change_mtu = usbnet_change_mtu,
134 .ndo_get_stats64 = usbnet_get_stats64,
135 .ndo_set_mac_address = asix_set_mac_address,
136 .ndo_validate_addr = eth_validate_addr,
137 .ndo_do_ioctl = ax88172a_ioctl,
138 .ndo_set_rx_mode = asix_set_multicast,
139};
140
141static const struct ethtool_ops ax88172a_ethtool_ops = {
142 .get_drvinfo = asix_get_drvinfo,
143 .get_link = usbnet_get_link,
144 .get_msglevel = usbnet_get_msglevel,
145 .set_msglevel = usbnet_set_msglevel,
146 .get_wol = asix_get_wol,
147 .set_wol = asix_set_wol,
148 .get_eeprom_len = asix_get_eeprom_len,
149 .get_eeprom = asix_get_eeprom,
150 .set_eeprom = asix_set_eeprom,
151 .nway_reset = phy_ethtool_nway_reset,
152 .get_link_ksettings = phy_ethtool_get_link_ksettings,
153 .set_link_ksettings = phy_ethtool_set_link_ksettings,
154};
155
156static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
157{
158 int ret;
159
160 ret = asix_sw_reset(dev, AX_SWRESET_IPPD, 0);
161 if (ret < 0)
162 goto err;
163
164 msleep(150);
165 ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, 0);
166 if (ret < 0)
167 goto err;
168
169 msleep(150);
170
171 ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD,
172 0);
173 if (ret < 0)
174 goto err;
175
176 return 0;
177
178err:
179 return ret;
180}
181
182
183static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
184{
185 int ret;
186 u8 buf[ETH_ALEN];
187 struct ax88172a_private *priv;
188
189 usbnet_get_endpoints(dev, intf);
190
191 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
192 if (!priv)
193 return -ENOMEM;
194
195 dev->driver_priv = priv;
196
197 /* Get the MAC address */
198 ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
199 if (ret < ETH_ALEN) {
200 netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
201 goto free;
202 }
203 memcpy(dev->net->dev_addr, buf, ETH_ALEN);
204
205 dev->net->netdev_ops = &ax88172a_netdev_ops;
206 dev->net->ethtool_ops = &ax88172a_ethtool_ops;
207
208 /* are we using the internal or the external phy? */
209 ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf, 0);
210 if (ret < 0) {
211 netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
212 ret);
213 goto free;
214 }
215
216 netdev_dbg(dev->net, "AX_CMD_SW_PHY_STATUS = 0x%02x\n", buf[0]);
217 switch (buf[0] & AX_PHY_SELECT_MASK) {
218 case AX_PHY_SELECT_INTERNAL:
219 netdev_dbg(dev->net, "use internal phy\n");
220 priv->use_embdphy = 1;
221 break;
222 case AX_PHY_SELECT_EXTERNAL:
223 netdev_dbg(dev->net, "use external phy\n");
224 priv->use_embdphy = 0;
225 break;
226 default:
227 netdev_err(dev->net, "Interface mode not supported by driver\n");
228 ret = -ENOTSUPP;
229 goto free;
230 }
231
232 priv->phy_addr = asix_read_phy_addr(dev, priv->use_embdphy);
233 ax88172a_reset_phy(dev, priv->use_embdphy);
234
235 /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
236 if (dev->driver_info->flags & FLAG_FRAMING_AX) {
237 /* hard_mtu is still the default - the device does not support
238 jumbo eth frames */
239 dev->rx_urb_size = 2048;
240 }
241
242 /* init MDIO bus */
243 ret = ax88172a_init_mdio(dev);
244 if (ret)
245 goto free;
246
247 return 0;
248
249free:
250 kfree(priv);
251 return ret;
252}
253
254static int ax88172a_stop(struct usbnet *dev)
255{
256 struct ax88172a_private *priv = dev->driver_priv;
257
258 netdev_dbg(dev->net, "Stopping interface\n");
259
260 if (priv->phydev) {
261 netdev_info(dev->net, "Disconnecting from phy %s\n",
262 priv->phy_name);
263 phy_stop(priv->phydev);
264 phy_disconnect(priv->phydev);
265 }
266
267 return 0;
268}
269
270static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf)
271{
272 struct ax88172a_private *priv = dev->driver_priv;
273
274 ax88172a_remove_mdio(dev);
275 kfree(priv);
276}
277
278static int ax88172a_reset(struct usbnet *dev)
279{
280 struct asix_data *data = (struct asix_data *)&dev->data;
281 struct ax88172a_private *priv = dev->driver_priv;
282 int ret;
283 u16 rx_ctl;
284
285 ax88172a_reset_phy(dev, priv->use_embdphy);
286
287 msleep(150);
288 rx_ctl = asix_read_rx_ctl(dev, 0);
289 netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
290 ret = asix_write_rx_ctl(dev, 0x0000, 0);
291 if (ret < 0)
292 goto out;
293
294 rx_ctl = asix_read_rx_ctl(dev, 0);
295 netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
296
297 msleep(150);
298
299 ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
300 AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
301 AX88772_IPG2_DEFAULT, 0, NULL, 0);
302 if (ret < 0) {
303 netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
304 goto out;
305 }
306
307 /* Rewrite MAC address */
308 memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
309 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
310 data->mac_addr, 0);
311 if (ret < 0)
312 goto out;
313
314 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
315 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
316 if (ret < 0)
317 goto out;
318
319 rx_ctl = asix_read_rx_ctl(dev, 0);
320 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
321 rx_ctl);
322
323 rx_ctl = asix_read_medium_status(dev, 0);
324 netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
325 rx_ctl);
326
327 /* Connect to PHY */
328 snprintf(priv->phy_name, 20, PHY_ID_FMT,
329 priv->mdio->id, priv->phy_addr);
330
331 priv->phydev = phy_connect(dev->net, priv->phy_name,
332 &ax88172a_adjust_link,
333 PHY_INTERFACE_MODE_MII);
334 if (IS_ERR(priv->phydev)) {
335 netdev_err(dev->net, "Could not connect to PHY device %s\n",
336 priv->phy_name);
337 ret = PTR_ERR(priv->phydev);
338 goto out;
339 }
340
341 netdev_info(dev->net, "Connected to phy %s\n", priv->phy_name);
342
343 /* During power-up, the AX88172A set the power down (BMCR_PDOWN)
344 * bit of the PHY. Bring the PHY up again.
345 */
346 genphy_resume(priv->phydev);
347 phy_start(priv->phydev);
348
349 return 0;
350
351out:
352 return ret;
353
354}
355
356static int ax88172a_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
357{
358 struct ax88172a_private *dp = dev->driver_priv;
359 struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
360
361 return asix_rx_fixup_internal(dev, skb, rx);
362}
363
364const struct driver_info ax88172a_info = {
365 .description = "ASIX AX88172A USB 2.0 Ethernet",
366 .bind = ax88172a_bind,
367 .reset = ax88172a_reset,
368 .stop = ax88172a_stop,
369 .unbind = ax88172a_unbind,
370 .status = ax88172a_status,
371 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
372 FLAG_MULTI_PACKET,
373 .rx_fixup = ax88172a_rx_fixup,
374 .tx_fixup = asix_tx_fixup,
375};