Loading...
1/*
2 * linux/arch/arm/mach-omap1/board-h2.c
3 *
4 * Board specific inits for OMAP-1610 H2
5 *
6 * Copyright (C) 2001 RidgeRun, Inc.
7 * Author: Greg Lonnon <glonnon@ridgerun.com>
8 *
9 * Copyright (C) 2002 MontaVista Software, Inc.
10 *
11 * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
12 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
13 *
14 * H2 specific changes and cleanup
15 * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
16 *
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License version 2 as
19 * published by the Free Software Foundation.
20 */
21#include <linux/gpio.h>
22#include <linux/kernel.h>
23#include <linux/platform_device.h>
24#include <linux/delay.h>
25#include <linux/i2c.h>
26#include <linux/mtd/mtd.h>
27#include <linux/mtd/nand.h>
28#include <linux/mtd/partitions.h>
29#include <linux/mtd/physmap.h>
30#include <linux/input.h>
31#include <linux/i2c/tps65010.h>
32#include <linux/smc91x.h>
33#include <linux/omapfb.h>
34#include <linux/platform_data/gpio-omap.h>
35#include <linux/leds.h>
36
37#include <asm/mach-types.h>
38#include <asm/mach/arch.h>
39#include <asm/mach/map.h>
40
41#include <mach/mux.h>
42#include <linux/omap-dma.h>
43#include <mach/tc.h>
44#include <linux/platform_data/keypad-omap.h>
45#include <mach/flash.h>
46
47#include <mach/hardware.h>
48#include <mach/usb.h>
49
50#include "common.h"
51#include "board-h2.h"
52
53/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
54#define OMAP1610_ETHR_START 0x04000300
55
56static const unsigned int h2_keymap[] = {
57 KEY(0, 0, KEY_LEFT),
58 KEY(1, 0, KEY_RIGHT),
59 KEY(2, 0, KEY_3),
60 KEY(3, 0, KEY_F10),
61 KEY(4, 0, KEY_F5),
62 KEY(5, 0, KEY_9),
63 KEY(0, 1, KEY_DOWN),
64 KEY(1, 1, KEY_UP),
65 KEY(2, 1, KEY_2),
66 KEY(3, 1, KEY_F9),
67 KEY(4, 1, KEY_F7),
68 KEY(5, 1, KEY_0),
69 KEY(0, 2, KEY_ENTER),
70 KEY(1, 2, KEY_6),
71 KEY(2, 2, KEY_1),
72 KEY(3, 2, KEY_F2),
73 KEY(4, 2, KEY_F6),
74 KEY(5, 2, KEY_HOME),
75 KEY(0, 3, KEY_8),
76 KEY(1, 3, KEY_5),
77 KEY(2, 3, KEY_F12),
78 KEY(3, 3, KEY_F3),
79 KEY(4, 3, KEY_F8),
80 KEY(5, 3, KEY_END),
81 KEY(0, 4, KEY_7),
82 KEY(1, 4, KEY_4),
83 KEY(2, 4, KEY_F11),
84 KEY(3, 4, KEY_F1),
85 KEY(4, 4, KEY_F4),
86 KEY(5, 4, KEY_ESC),
87 KEY(0, 5, KEY_F13),
88 KEY(1, 5, KEY_F14),
89 KEY(2, 5, KEY_F15),
90 KEY(3, 5, KEY_F16),
91 KEY(4, 5, KEY_SLEEP),
92};
93
94static struct mtd_partition h2_nor_partitions[] = {
95 /* bootloader (U-Boot, etc) in first sector */
96 {
97 .name = "bootloader",
98 .offset = 0,
99 .size = SZ_128K,
100 .mask_flags = MTD_WRITEABLE, /* force read-only */
101 },
102 /* bootloader params in the next sector */
103 {
104 .name = "params",
105 .offset = MTDPART_OFS_APPEND,
106 .size = SZ_128K,
107 .mask_flags = 0,
108 },
109 /* kernel */
110 {
111 .name = "kernel",
112 .offset = MTDPART_OFS_APPEND,
113 .size = SZ_2M,
114 .mask_flags = 0
115 },
116 /* file system */
117 {
118 .name = "filesystem",
119 .offset = MTDPART_OFS_APPEND,
120 .size = MTDPART_SIZ_FULL,
121 .mask_flags = 0
122 }
123};
124
125static struct physmap_flash_data h2_nor_data = {
126 .width = 2,
127 .set_vpp = omap1_set_vpp,
128 .parts = h2_nor_partitions,
129 .nr_parts = ARRAY_SIZE(h2_nor_partitions),
130};
131
132static struct resource h2_nor_resource = {
133 /* This is on CS3, wherever it's mapped */
134 .flags = IORESOURCE_MEM,
135};
136
137static struct platform_device h2_nor_device = {
138 .name = "physmap-flash",
139 .id = 0,
140 .dev = {
141 .platform_data = &h2_nor_data,
142 },
143 .num_resources = 1,
144 .resource = &h2_nor_resource,
145};
146
147static struct mtd_partition h2_nand_partitions[] = {
148#if 0
149 /* REVISIT: enable these partitions if you make NAND BOOT
150 * work on your H2 (rev C or newer); published versions of
151 * x-load only support P2 and H3.
152 */
153 {
154 .name = "xloader",
155 .offset = 0,
156 .size = 64 * 1024,
157 .mask_flags = MTD_WRITEABLE, /* force read-only */
158 },
159 {
160 .name = "bootloader",
161 .offset = MTDPART_OFS_APPEND,
162 .size = 256 * 1024,
163 .mask_flags = MTD_WRITEABLE, /* force read-only */
164 },
165 {
166 .name = "params",
167 .offset = MTDPART_OFS_APPEND,
168 .size = 192 * 1024,
169 },
170 {
171 .name = "kernel",
172 .offset = MTDPART_OFS_APPEND,
173 .size = 2 * SZ_1M,
174 },
175#endif
176 {
177 .name = "filesystem",
178 .size = MTDPART_SIZ_FULL,
179 .offset = MTDPART_OFS_APPEND,
180 },
181};
182
183#define H2_NAND_RB_GPIO_PIN 62
184
185static int h2_nand_dev_ready(struct mtd_info *mtd)
186{
187 return gpio_get_value(H2_NAND_RB_GPIO_PIN);
188}
189
190static struct platform_nand_data h2_nand_platdata = {
191 .chip = {
192 .nr_chips = 1,
193 .chip_offset = 0,
194 .nr_partitions = ARRAY_SIZE(h2_nand_partitions),
195 .partitions = h2_nand_partitions,
196 .options = NAND_SAMSUNG_LP_OPTIONS,
197 },
198 .ctrl = {
199 .cmd_ctrl = omap1_nand_cmd_ctl,
200 .dev_ready = h2_nand_dev_ready,
201 },
202};
203
204static struct resource h2_nand_resource = {
205 .flags = IORESOURCE_MEM,
206};
207
208static struct platform_device h2_nand_device = {
209 .name = "gen_nand",
210 .id = 0,
211 .dev = {
212 .platform_data = &h2_nand_platdata,
213 },
214 .num_resources = 1,
215 .resource = &h2_nand_resource,
216};
217
218static struct smc91x_platdata h2_smc91x_info = {
219 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
220 .leda = RPC_LED_100_10,
221 .ledb = RPC_LED_TX_RX,
222};
223
224static struct resource h2_smc91x_resources[] = {
225 [0] = {
226 .start = OMAP1610_ETHR_START, /* Physical */
227 .end = OMAP1610_ETHR_START + 0xf,
228 .flags = IORESOURCE_MEM,
229 },
230 [1] = {
231 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
232 },
233};
234
235static struct platform_device h2_smc91x_device = {
236 .name = "smc91x",
237 .id = 0,
238 .dev = {
239 .platform_data = &h2_smc91x_info,
240 },
241 .num_resources = ARRAY_SIZE(h2_smc91x_resources),
242 .resource = h2_smc91x_resources,
243};
244
245static struct resource h2_kp_resources[] = {
246 [0] = {
247 .start = INT_KEYBOARD,
248 .end = INT_KEYBOARD,
249 .flags = IORESOURCE_IRQ,
250 },
251};
252
253static const struct matrix_keymap_data h2_keymap_data = {
254 .keymap = h2_keymap,
255 .keymap_size = ARRAY_SIZE(h2_keymap),
256};
257
258static struct omap_kp_platform_data h2_kp_data = {
259 .rows = 8,
260 .cols = 8,
261 .keymap_data = &h2_keymap_data,
262 .rep = true,
263 .delay = 9,
264 .dbounce = true,
265};
266
267static struct platform_device h2_kp_device = {
268 .name = "omap-keypad",
269 .id = -1,
270 .dev = {
271 .platform_data = &h2_kp_data,
272 },
273 .num_resources = ARRAY_SIZE(h2_kp_resources),
274 .resource = h2_kp_resources,
275};
276
277static struct gpio_led h2_gpio_led_pins[] = {
278 {
279 .name = "h2:red",
280 .default_trigger = "heartbeat",
281 .gpio = 3,
282 },
283 {
284 .name = "h2:green",
285 .default_trigger = "cpu0",
286 .gpio = OMAP_MPUIO(4),
287 },
288};
289
290static struct gpio_led_platform_data h2_gpio_led_data = {
291 .leds = h2_gpio_led_pins,
292 .num_leds = ARRAY_SIZE(h2_gpio_led_pins),
293};
294
295static struct platform_device h2_gpio_leds = {
296 .name = "leds-gpio",
297 .id = -1,
298 .dev = {
299 .platform_data = &h2_gpio_led_data,
300 },
301};
302
303static struct platform_device *h2_devices[] __initdata = {
304 &h2_nor_device,
305 &h2_nand_device,
306 &h2_smc91x_device,
307 &h2_kp_device,
308 &h2_gpio_leds,
309};
310
311static void __init h2_init_smc91x(void)
312{
313 if (gpio_request(0, "SMC91x irq") < 0) {
314 printk("Error requesting gpio 0 for smc91x irq\n");
315 return;
316 }
317}
318
319static int tps_setup(struct i2c_client *client, void *context)
320{
321 if (!IS_BUILTIN(CONFIG_TPS65010))
322 return -ENOSYS;
323
324 tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
325 TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
326
327 return 0;
328}
329
330static struct tps65010_board tps_board = {
331 .base = H2_TPS_GPIO_BASE,
332 .outmask = 0x0f,
333 .setup = tps_setup,
334};
335
336static struct i2c_board_info __initdata h2_i2c_board_info[] = {
337 {
338 I2C_BOARD_INFO("tps65010", 0x48),
339 .platform_data = &tps_board,
340 }, {
341 I2C_BOARD_INFO("isp1301_omap", 0x2d),
342 },
343};
344
345static struct omap_usb_config h2_usb_config __initdata = {
346 /* usb1 has a Mini-AB port and external isp1301 transceiver */
347 .otg = 2,
348
349#ifdef CONFIG_USB_GADGET_OMAP
350 .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
351 /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
352#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
353 /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
354 .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
355#endif
356
357 .pins[1] = 3,
358};
359
360static struct omap_lcd_config h2_lcd_config __initdata = {
361 .ctrl_name = "internal",
362};
363
364static void __init h2_init(void)
365{
366 h2_init_smc91x();
367
368 /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
369 * to address 0 by a dip switch), NAND on CS2B. The NAND driver will
370 * notice whether a NAND chip is enabled at probe time.
371 *
372 * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
373 * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try
374 * detecting that in code here, to avoid probing every possible flash
375 * configuration...
376 */
377 h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
378 h2_nor_resource.end += SZ_32M - 1;
379
380 h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
381 h2_nand_resource.end += SZ_4K - 1;
382 BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
383 gpio_direction_input(H2_NAND_RB_GPIO_PIN);
384
385 omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
386 omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
387
388 /* MMC: card detect and WP */
389 /* omap_cfg_reg(U19_ARMIO1); */ /* CD */
390 omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */
391
392 /* Mux pins for keypad */
393 omap_cfg_reg(F18_1610_KBC0);
394 omap_cfg_reg(D20_1610_KBC1);
395 omap_cfg_reg(D19_1610_KBC2);
396 omap_cfg_reg(E18_1610_KBC3);
397 omap_cfg_reg(C21_1610_KBC4);
398 omap_cfg_reg(G18_1610_KBR0);
399 omap_cfg_reg(F19_1610_KBR1);
400 omap_cfg_reg(H14_1610_KBR2);
401 omap_cfg_reg(E20_1610_KBR3);
402 omap_cfg_reg(E19_1610_KBR4);
403 omap_cfg_reg(N19_1610_KBR5);
404
405 /* GPIO based LEDs */
406 omap_cfg_reg(P18_1610_GPIO3);
407 omap_cfg_reg(MPUIO4);
408
409 h2_smc91x_resources[1].start = gpio_to_irq(0);
410 h2_smc91x_resources[1].end = gpio_to_irq(0);
411 platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
412 omap_serial_init();
413 h2_i2c_board_info[0].irq = gpio_to_irq(58);
414 h2_i2c_board_info[1].irq = gpio_to_irq(2);
415 omap_register_i2c_bus(1, 100, h2_i2c_board_info,
416 ARRAY_SIZE(h2_i2c_board_info));
417 omap1_usb_init(&h2_usb_config);
418 h2_mmc_init();
419
420 omapfb_set_lcd_config(&h2_lcd_config);
421}
422
423MACHINE_START(OMAP_H2, "TI-H2")
424 /* Maintainer: Imre Deak <imre.deak@nokia.com> */
425 .atag_offset = 0x100,
426 .map_io = omap16xx_map_io,
427 .init_early = omap1_init_early,
428 .init_irq = omap1_init_irq,
429 .init_machine = h2_init,
430 .init_late = omap1_init_late,
431 .init_time = omap1_timer_init,
432 .restart = omap1_restart,
433MACHINE_END
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * linux/arch/arm/mach-omap1/board-h2.c
4 *
5 * Board specific inits for OMAP-1610 H2
6 *
7 * Copyright (C) 2001 RidgeRun, Inc.
8 * Author: Greg Lonnon <glonnon@ridgerun.com>
9 *
10 * Copyright (C) 2002 MontaVista Software, Inc.
11 *
12 * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
13 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
14 *
15 * H2 specific changes and cleanup
16 * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
17 */
18#include <linux/gpio.h>
19#include <linux/kernel.h>
20#include <linux/platform_device.h>
21#include <linux/delay.h>
22#include <linux/i2c.h>
23#include <linux/mtd/mtd.h>
24#include <linux/mtd/platnand.h>
25#include <linux/mtd/physmap.h>
26#include <linux/input.h>
27#include <linux/mfd/tps65010.h>
28#include <linux/smc91x.h>
29#include <linux/omapfb.h>
30#include <linux/platform_data/gpio-omap.h>
31#include <linux/leds.h>
32
33#include <asm/mach-types.h>
34#include <asm/mach/arch.h>
35#include <asm/mach/map.h>
36
37#include <mach/mux.h>
38#include <linux/omap-dma.h>
39#include <mach/tc.h>
40#include <linux/platform_data/keypad-omap.h>
41#include "flash.h"
42
43#include <mach/hardware.h>
44#include <mach/usb.h>
45
46#include "common.h"
47#include "board-h2.h"
48
49/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
50#define OMAP1610_ETHR_START 0x04000300
51
52static const unsigned int h2_keymap[] = {
53 KEY(0, 0, KEY_LEFT),
54 KEY(1, 0, KEY_RIGHT),
55 KEY(2, 0, KEY_3),
56 KEY(3, 0, KEY_F10),
57 KEY(4, 0, KEY_F5),
58 KEY(5, 0, KEY_9),
59 KEY(0, 1, KEY_DOWN),
60 KEY(1, 1, KEY_UP),
61 KEY(2, 1, KEY_2),
62 KEY(3, 1, KEY_F9),
63 KEY(4, 1, KEY_F7),
64 KEY(5, 1, KEY_0),
65 KEY(0, 2, KEY_ENTER),
66 KEY(1, 2, KEY_6),
67 KEY(2, 2, KEY_1),
68 KEY(3, 2, KEY_F2),
69 KEY(4, 2, KEY_F6),
70 KEY(5, 2, KEY_HOME),
71 KEY(0, 3, KEY_8),
72 KEY(1, 3, KEY_5),
73 KEY(2, 3, KEY_F12),
74 KEY(3, 3, KEY_F3),
75 KEY(4, 3, KEY_F8),
76 KEY(5, 3, KEY_END),
77 KEY(0, 4, KEY_7),
78 KEY(1, 4, KEY_4),
79 KEY(2, 4, KEY_F11),
80 KEY(3, 4, KEY_F1),
81 KEY(4, 4, KEY_F4),
82 KEY(5, 4, KEY_ESC),
83 KEY(0, 5, KEY_F13),
84 KEY(1, 5, KEY_F14),
85 KEY(2, 5, KEY_F15),
86 KEY(3, 5, KEY_F16),
87 KEY(4, 5, KEY_SLEEP),
88};
89
90static struct mtd_partition h2_nor_partitions[] = {
91 /* bootloader (U-Boot, etc) in first sector */
92 {
93 .name = "bootloader",
94 .offset = 0,
95 .size = SZ_128K,
96 .mask_flags = MTD_WRITEABLE, /* force read-only */
97 },
98 /* bootloader params in the next sector */
99 {
100 .name = "params",
101 .offset = MTDPART_OFS_APPEND,
102 .size = SZ_128K,
103 .mask_flags = 0,
104 },
105 /* kernel */
106 {
107 .name = "kernel",
108 .offset = MTDPART_OFS_APPEND,
109 .size = SZ_2M,
110 .mask_flags = 0
111 },
112 /* file system */
113 {
114 .name = "filesystem",
115 .offset = MTDPART_OFS_APPEND,
116 .size = MTDPART_SIZ_FULL,
117 .mask_flags = 0
118 }
119};
120
121static struct physmap_flash_data h2_nor_data = {
122 .width = 2,
123 .set_vpp = omap1_set_vpp,
124 .parts = h2_nor_partitions,
125 .nr_parts = ARRAY_SIZE(h2_nor_partitions),
126};
127
128static struct resource h2_nor_resource = {
129 /* This is on CS3, wherever it's mapped */
130 .flags = IORESOURCE_MEM,
131};
132
133static struct platform_device h2_nor_device = {
134 .name = "physmap-flash",
135 .id = 0,
136 .dev = {
137 .platform_data = &h2_nor_data,
138 },
139 .num_resources = 1,
140 .resource = &h2_nor_resource,
141};
142
143static struct mtd_partition h2_nand_partitions[] = {
144#if 0
145 /* REVISIT: enable these partitions if you make NAND BOOT
146 * work on your H2 (rev C or newer); published versions of
147 * x-load only support P2 and H3.
148 */
149 {
150 .name = "xloader",
151 .offset = 0,
152 .size = 64 * 1024,
153 .mask_flags = MTD_WRITEABLE, /* force read-only */
154 },
155 {
156 .name = "bootloader",
157 .offset = MTDPART_OFS_APPEND,
158 .size = 256 * 1024,
159 .mask_flags = MTD_WRITEABLE, /* force read-only */
160 },
161 {
162 .name = "params",
163 .offset = MTDPART_OFS_APPEND,
164 .size = 192 * 1024,
165 },
166 {
167 .name = "kernel",
168 .offset = MTDPART_OFS_APPEND,
169 .size = 2 * SZ_1M,
170 },
171#endif
172 {
173 .name = "filesystem",
174 .size = MTDPART_SIZ_FULL,
175 .offset = MTDPART_OFS_APPEND,
176 },
177};
178
179#define H2_NAND_RB_GPIO_PIN 62
180
181static int h2_nand_dev_ready(struct nand_chip *chip)
182{
183 return gpio_get_value(H2_NAND_RB_GPIO_PIN);
184}
185
186static struct platform_nand_data h2_nand_platdata = {
187 .chip = {
188 .nr_chips = 1,
189 .chip_offset = 0,
190 .nr_partitions = ARRAY_SIZE(h2_nand_partitions),
191 .partitions = h2_nand_partitions,
192 .options = NAND_SAMSUNG_LP_OPTIONS,
193 },
194 .ctrl = {
195 .cmd_ctrl = omap1_nand_cmd_ctl,
196 .dev_ready = h2_nand_dev_ready,
197 },
198};
199
200static struct resource h2_nand_resource = {
201 .flags = IORESOURCE_MEM,
202};
203
204static struct platform_device h2_nand_device = {
205 .name = "gen_nand",
206 .id = 0,
207 .dev = {
208 .platform_data = &h2_nand_platdata,
209 },
210 .num_resources = 1,
211 .resource = &h2_nand_resource,
212};
213
214static struct smc91x_platdata h2_smc91x_info = {
215 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
216 .leda = RPC_LED_100_10,
217 .ledb = RPC_LED_TX_RX,
218};
219
220static struct resource h2_smc91x_resources[] = {
221 [0] = {
222 .start = OMAP1610_ETHR_START, /* Physical */
223 .end = OMAP1610_ETHR_START + 0xf,
224 .flags = IORESOURCE_MEM,
225 },
226 [1] = {
227 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
228 },
229};
230
231static struct platform_device h2_smc91x_device = {
232 .name = "smc91x",
233 .id = 0,
234 .dev = {
235 .platform_data = &h2_smc91x_info,
236 },
237 .num_resources = ARRAY_SIZE(h2_smc91x_resources),
238 .resource = h2_smc91x_resources,
239};
240
241static struct resource h2_kp_resources[] = {
242 [0] = {
243 .start = INT_KEYBOARD,
244 .end = INT_KEYBOARD,
245 .flags = IORESOURCE_IRQ,
246 },
247};
248
249static const struct matrix_keymap_data h2_keymap_data = {
250 .keymap = h2_keymap,
251 .keymap_size = ARRAY_SIZE(h2_keymap),
252};
253
254static struct omap_kp_platform_data h2_kp_data = {
255 .rows = 8,
256 .cols = 8,
257 .keymap_data = &h2_keymap_data,
258 .rep = true,
259 .delay = 9,
260 .dbounce = true,
261};
262
263static struct platform_device h2_kp_device = {
264 .name = "omap-keypad",
265 .id = -1,
266 .dev = {
267 .platform_data = &h2_kp_data,
268 },
269 .num_resources = ARRAY_SIZE(h2_kp_resources),
270 .resource = h2_kp_resources,
271};
272
273static const struct gpio_led h2_gpio_led_pins[] = {
274 {
275 .name = "h2:red",
276 .default_trigger = "heartbeat",
277 .gpio = 3,
278 },
279 {
280 .name = "h2:green",
281 .default_trigger = "cpu0",
282 .gpio = OMAP_MPUIO(4),
283 },
284};
285
286static struct gpio_led_platform_data h2_gpio_led_data = {
287 .leds = h2_gpio_led_pins,
288 .num_leds = ARRAY_SIZE(h2_gpio_led_pins),
289};
290
291static struct platform_device h2_gpio_leds = {
292 .name = "leds-gpio",
293 .id = -1,
294 .dev = {
295 .platform_data = &h2_gpio_led_data,
296 },
297};
298
299static struct platform_device *h2_devices[] __initdata = {
300 &h2_nor_device,
301 &h2_nand_device,
302 &h2_smc91x_device,
303 &h2_kp_device,
304 &h2_gpio_leds,
305};
306
307static void __init h2_init_smc91x(void)
308{
309 if (gpio_request(0, "SMC91x irq") < 0) {
310 printk("Error requesting gpio 0 for smc91x irq\n");
311 return;
312 }
313}
314
315static int tps_setup(struct i2c_client *client, void *context)
316{
317 if (!IS_BUILTIN(CONFIG_TPS65010))
318 return -ENOSYS;
319
320 tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
321 TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
322
323 return 0;
324}
325
326static struct tps65010_board tps_board = {
327 .base = H2_TPS_GPIO_BASE,
328 .outmask = 0x0f,
329 .setup = tps_setup,
330};
331
332static struct i2c_board_info __initdata h2_i2c_board_info[] = {
333 {
334 I2C_BOARD_INFO("tps65010", 0x48),
335 .platform_data = &tps_board,
336 }, {
337 I2C_BOARD_INFO("isp1301_omap", 0x2d),
338 },
339};
340
341static struct omap_usb_config h2_usb_config __initdata = {
342 /* usb1 has a Mini-AB port and external isp1301 transceiver */
343 .otg = 2,
344
345#if IS_ENABLED(CONFIG_USB_OMAP)
346 .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
347 /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
348#elif IS_ENABLED(CONFIG_USB_OHCI_HCD)
349 /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
350 .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
351#endif
352
353 .pins[1] = 3,
354};
355
356static const struct omap_lcd_config h2_lcd_config __initconst = {
357 .ctrl_name = "internal",
358};
359
360static void __init h2_init(void)
361{
362 h2_init_smc91x();
363
364 /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
365 * to address 0 by a dip switch), NAND on CS2B. The NAND driver will
366 * notice whether a NAND chip is enabled at probe time.
367 *
368 * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
369 * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try
370 * detecting that in code here, to avoid probing every possible flash
371 * configuration...
372 */
373 h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
374 h2_nor_resource.end += SZ_32M - 1;
375
376 h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
377 h2_nand_resource.end += SZ_4K - 1;
378 BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
379 gpio_direction_input(H2_NAND_RB_GPIO_PIN);
380
381 omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
382 omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
383
384 /* MMC: card detect and WP */
385 /* omap_cfg_reg(U19_ARMIO1); */ /* CD */
386 omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */
387
388 /* Mux pins for keypad */
389 omap_cfg_reg(F18_1610_KBC0);
390 omap_cfg_reg(D20_1610_KBC1);
391 omap_cfg_reg(D19_1610_KBC2);
392 omap_cfg_reg(E18_1610_KBC3);
393 omap_cfg_reg(C21_1610_KBC4);
394 omap_cfg_reg(G18_1610_KBR0);
395 omap_cfg_reg(F19_1610_KBR1);
396 omap_cfg_reg(H14_1610_KBR2);
397 omap_cfg_reg(E20_1610_KBR3);
398 omap_cfg_reg(E19_1610_KBR4);
399 omap_cfg_reg(N19_1610_KBR5);
400
401 /* GPIO based LEDs */
402 omap_cfg_reg(P18_1610_GPIO3);
403 omap_cfg_reg(MPUIO4);
404
405 h2_smc91x_resources[1].start = gpio_to_irq(0);
406 h2_smc91x_resources[1].end = gpio_to_irq(0);
407 platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
408 omap_serial_init();
409 h2_i2c_board_info[0].irq = gpio_to_irq(58);
410 h2_i2c_board_info[1].irq = gpio_to_irq(2);
411 omap_register_i2c_bus(1, 100, h2_i2c_board_info,
412 ARRAY_SIZE(h2_i2c_board_info));
413 omap1_usb_init(&h2_usb_config);
414 h2_mmc_init();
415
416 omapfb_set_lcd_config(&h2_lcd_config);
417}
418
419MACHINE_START(OMAP_H2, "TI-H2")
420 /* Maintainer: Imre Deak <imre.deak@nokia.com> */
421 .atag_offset = 0x100,
422 .map_io = omap16xx_map_io,
423 .init_early = omap1_init_early,
424 .init_irq = omap1_init_irq,
425 .handle_irq = omap1_handle_irq,
426 .init_machine = h2_init,
427 .init_late = omap1_init_late,
428 .init_time = omap1_timer_init,
429 .restart = omap1_restart,
430MACHINE_END