Linux Audio

Check our new training course

Loading...
  1/*
  2 *   Copyright (C) International Business Machines Corp., 2000-2003
  3 *
  4 *   This program is free software;  you can redistribute it and/or modify
  5 *   it under the terms of the GNU General Public License as published by
  6 *   the Free Software Foundation; either version 2 of the License, or
  7 *   (at your option) any later version.
  8 *
  9 *   This program is distributed in the hope that it will be useful,
 10 *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
 11 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
 12 *   the GNU General Public License for more details.
 13 *
 14 *   You should have received a copy of the GNU General Public License
 15 *   along with this program;  if not, write to the Free Software
 16 *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 17 */
 18#ifndef _H_JFS_FILSYS
 19#define _H_JFS_FILSYS
 20
 21/*
 22 *	jfs_filsys.h
 23 *
 24 * file system (implementation-dependent) constants
 25 *
 26 * refer to <limits.h> for system wide implementation-dependent constants
 27 */
 28
 29/*
 30 *	 file system option (superblock flag)
 31 */
 32
 33/* directory option */
 34#define JFS_UNICODE	0x00000001	/* unicode name */
 35
 36/* mount time flags for error handling */
 37#define JFS_ERR_REMOUNT_RO 0x00000002	/* remount read-only */
 38#define JFS_ERR_CONTINUE   0x00000004	/* continue */
 39#define JFS_ERR_PANIC      0x00000008	/* panic */
 40
 41/* Quota support */
 42#define	JFS_USRQUOTA	0x00000010
 43#define	JFS_GRPQUOTA	0x00000020
 44
 45/* mount time flag to disable journaling to disk */
 46#define JFS_NOINTEGRITY 0x00000040
 47
 48/* mount time flag to enable TRIM to ssd disks */
 49#define JFS_DISCARD     0x00000080
 50
 51/* commit option */
 52#define	JFS_COMMIT	0x00000f00	/* commit option mask */
 53#define	JFS_GROUPCOMMIT	0x00000100	/* group (of 1) commit */
 54#define	JFS_LAZYCOMMIT	0x00000200	/* lazy commit */
 55#define	JFS_TMPFS	0x00000400	/* temporary file system -
 56					 * do not log/commit:
 57					 * Never implemented
 58					 */
 59
 60/* log logical volume option */
 61#define	JFS_INLINELOG	0x00000800	/* inline log within file system */
 62#define JFS_INLINEMOVE	0x00001000	/* inline log being moved */
 63
 64/* Secondary aggregate inode table */
 65#define JFS_BAD_SAIT	0x00010000	/* current secondary ait is bad */
 66
 67/* sparse regular file support */
 68#define JFS_SPARSE	0x00020000	/* sparse regular file */
 69
 70/* DASD Limits		F226941 */
 71#define JFS_DASD_ENABLED 0x00040000	/* DASD limits enabled */
 72#define	JFS_DASD_PRIME	0x00080000	/* Prime DASD usage on boot */
 73
 74/* big endian flag */
 75#define	JFS_SWAP_BYTES	0x00100000	/* running on big endian computer */
 76
 77/* Directory index */
 78#define JFS_DIR_INDEX	0x00200000	/* Persistent index for */
 79
 80/* platform options */
 81#define JFS_LINUX	0x10000000	/* Linux support */
 82#define JFS_DFS		0x20000000	/* DCE DFS LFS support */
 83/*	Never implemented */
 84
 85#define JFS_OS2		0x40000000	/* OS/2 support */
 86/*	case-insensitive name/directory support */
 87
 88#define JFS_AIX		0x80000000	/* AIX support */
 89
 90/*
 91 *	buffer cache configuration
 92 */
 93/* page size */
 94#ifdef PSIZE
 95#undef PSIZE
 96#endif
 97#define	PSIZE		4096	/* page size (in byte) */
 98#define	L2PSIZE		12	/* log2(PSIZE) */
 99#define	POFFSET		4095	/* offset within page */
100
101/* buffer page size */
102#define BPSIZE	PSIZE
103
104/*
105 *	fs fundamental size
106 *
107 * PSIZE >= file system block size >= PBSIZE >= DISIZE
108 */
109#define	PBSIZE		512	/* physical block size (in byte) */
110#define	L2PBSIZE	9	/* log2(PBSIZE) */
111
112#define DISIZE		512	/* on-disk inode size (in byte) */
113#define L2DISIZE	9	/* log2(DISIZE) */
114
115#define IDATASIZE	256	/* inode inline data size */
116#define	IXATTRSIZE	128	/* inode inline extended attribute size */
117
118#define XTPAGE_SIZE	4096
119#define log2_PAGESIZE	12
120
121#define IAG_SIZE	4096
122#define IAG_EXTENT_SIZE 4096
123#define	INOSPERIAG	4096	/* number of disk inodes per iag */
124#define	L2INOSPERIAG	12	/* l2 number of disk inodes per iag */
125#define INOSPEREXT	32	/* number of disk inode per extent */
126#define L2INOSPEREXT	5	/* l2 number of disk inode per extent */
127#define	IXSIZE		(DISIZE * INOSPEREXT)	/* inode extent size */
128#define	INOSPERPAGE	8	/* number of disk inodes per 4K page */
129#define	L2INOSPERPAGE	3	/* log2(INOSPERPAGE) */
130
131#define	IAGFREELIST_LWM	64
132
133#define INODE_EXTENT_SIZE	IXSIZE	/* inode extent size */
134#define NUM_INODE_PER_EXTENT	INOSPEREXT
135#define NUM_INODE_PER_IAG	INOSPERIAG
136
137#define MINBLOCKSIZE		512
138#define MAXBLOCKSIZE		4096
139#define	MAXFILESIZE		((s64)1 << 52)
140
141#define JFS_LINK_MAX		0xffffffff
142
143/* Minimum number of bytes supported for a JFS partition */
144#define MINJFS			(0x1000000)
145#define MINJFSTEXT		"16"
146
147/*
148 * file system block size -> physical block size
149 */
150#define LBOFFSET(x)	((x) & (PBSIZE - 1))
151#define LBNUMBER(x)	((x) >> L2PBSIZE)
152#define	LBLK2PBLK(sb,b)	((b) << (sb->s_blocksize_bits - L2PBSIZE))
153#define	PBLK2LBLK(sb,b)	((b) >> (sb->s_blocksize_bits - L2PBSIZE))
154/* size in byte -> last page number */
155#define	SIZE2PN(size)	( ((s64)((size) - 1)) >> (L2PSIZE) )
156/* size in byte -> last file system block number */
157#define	SIZE2BN(size, l2bsize) ( ((s64)((size) - 1)) >> (l2bsize) )
158
159/*
160 * fixed physical block address (physical block size = 512 byte)
161 *
162 * NOTE: since we can't guarantee a physical block size of 512 bytes the use of
163 *	 these macros should be removed and the byte offset macros used instead.
164 */
165#define SUPER1_B	64	/* primary superblock */
166#define	AIMAP_B		(SUPER1_B + 8)	/* 1st extent of aggregate inode map */
167#define	AITBL_B		(AIMAP_B + 16)	/*
168					 * 1st extent of aggregate inode table
169					 */
170#define	SUPER2_B	(AITBL_B + 32)	/* 2ndary superblock pbn */
171#define	BMAP_B		(SUPER2_B + 8)	/* block allocation map */
172
173/*
174 * SIZE_OF_SUPER defines the total amount of space reserved on disk for the
175 * superblock.  This is not the same as the superblock structure, since all of
176 * this space is not currently being used.
177 */
178#define SIZE_OF_SUPER	PSIZE
179
180/*
181 * SIZE_OF_AG_TABLE defines the amount of space reserved to hold the AG table
182 */
183#define SIZE_OF_AG_TABLE	PSIZE
184
185/*
186 * SIZE_OF_MAP_PAGE defines the amount of disk space reserved for each page of
187 * the inode allocation map (to hold iag)
188 */
189#define SIZE_OF_MAP_PAGE	PSIZE
190
191/*
192 * fixed byte offset address
193 */
194#define SUPER1_OFF	0x8000	/* primary superblock */
195#define AIMAP_OFF	(SUPER1_OFF + SIZE_OF_SUPER)
196					/*
197					 * Control page of aggregate inode map
198					 * followed by 1st extent of map
199					 */
200#define AITBL_OFF	(AIMAP_OFF + (SIZE_OF_MAP_PAGE << 1))
201					/*
202					 * 1st extent of aggregate inode table
203					 */
204#define SUPER2_OFF	(AITBL_OFF + INODE_EXTENT_SIZE)
205					/*
206					 * secondary superblock
207					 */
208#define BMAP_OFF	(SUPER2_OFF + SIZE_OF_SUPER)
209					/*
210					 * block allocation map
211					 */
212
213/*
214 * The following macro is used to indicate the number of reserved disk blocks at
215 * the front of an aggregate, in terms of physical blocks.  This value is
216 * currently defined to be 32K.  This turns out to be the same as the primary
217 * superblock's address, since it directly follows the reserved blocks.
218 */
219#define AGGR_RSVD_BLOCKS	SUPER1_B
220
221/*
222 * The following macro is used to indicate the number of reserved bytes at the
223 * front of an aggregate.  This value is currently defined to be 32K.  This
224 * turns out to be the same as the primary superblock's byte offset, since it
225 * directly follows the reserved blocks.
226 */
227#define AGGR_RSVD_BYTES	SUPER1_OFF
228
229/*
230 * The following macro defines the byte offset for the first inode extent in
231 * the aggregate inode table.  This allows us to find the self inode to find the
232 * rest of the table.  Currently this value is 44K.
233 */
234#define AGGR_INODE_TABLE_START	AITBL_OFF
235
236/*
237 *	fixed reserved inode number
238 */
239/* aggregate inode */
240#define AGGR_RESERVED_I	0	/* aggregate inode (reserved) */
241#define	AGGREGATE_I	1	/* aggregate inode map inode */
242#define	BMAP_I		2	/* aggregate block allocation map inode */
243#define	LOG_I		3	/* aggregate inline log inode */
244#define BADBLOCK_I	4	/* aggregate bad block inode */
245#define	FILESYSTEM_I	16	/* 1st/only fileset inode in ait:
246				 * fileset inode map inode
247				 */
248
249/* per fileset inode */
250#define FILESET_RSVD_I	0	/* fileset inode (reserved) */
251#define FILESET_EXT_I	1	/* fileset inode extension */
252#define	ROOT_I		2	/* fileset root inode */
253#define ACL_I		3	/* fileset ACL inode */
254
255#define FILESET_OBJECT_I 4	/* the first fileset inode available for a file
256				 * or directory or link...
257				 */
258#define FIRST_FILESET_INO 16	/* the first aggregate inode which describes
259				 * an inode.  (To fsck this is also the first
260				 * inode in part 2 of the agg inode table.)
261				 */
262
263/*
264 *	directory configuration
265 */
266#define JFS_NAME_MAX	255
267#define JFS_PATH_MAX	BPSIZE
268
269
270/*
271 *	file system state (superblock state)
272 */
273#define FM_CLEAN 0x00000000	/* file system is unmounted and clean */
274#define FM_MOUNT 0x00000001	/* file system is mounted cleanly */
275#define FM_DIRTY 0x00000002	/* file system was not unmounted and clean
276				 * when mounted or
277				 * commit failure occurred while being mounted:
278				 * fsck() must be run to repair
279				 */
280#define	FM_LOGREDO 0x00000004	/* log based recovery (logredo()) failed:
281				 * fsck() must be run to repair
282				 */
283#define	FM_EXTENDFS 0x00000008	/* file system extendfs() in progress */
284
285#endif				/* _H_JFS_FILSYS */
  1/* SPDX-License-Identifier: GPL-2.0-or-later */
  2/*
  3 *   Copyright (C) International Business Machines Corp., 2000-2003
  4 */
  5#ifndef _H_JFS_FILSYS
  6#define _H_JFS_FILSYS
  7
  8/*
  9 *	jfs_filsys.h
 10 *
 11 * file system (implementation-dependent) constants
 12 *
 13 * refer to <limits.h> for system wide implementation-dependent constants
 14 */
 15
 16/*
 17 *	 file system option (superblock flag)
 18 */
 19
 20/* directory option */
 21#define JFS_UNICODE	0x00000001	/* unicode name */
 22
 23/* mount time flags for error handling */
 24#define JFS_ERR_REMOUNT_RO 0x00000002	/* remount read-only */
 25#define JFS_ERR_CONTINUE   0x00000004	/* continue */
 26#define JFS_ERR_PANIC      0x00000008	/* panic */
 27
 28/* Quota support */
 29#define	JFS_USRQUOTA	0x00000010
 30#define	JFS_GRPQUOTA	0x00000020
 31
 32/* mount time flag to disable journaling to disk */
 33#define JFS_NOINTEGRITY 0x00000040
 34
 35/* mount time flag to enable TRIM to ssd disks */
 36#define JFS_DISCARD     0x00000080
 37
 38/* commit option */
 39#define	JFS_COMMIT	0x00000f00	/* commit option mask */
 40#define	JFS_GROUPCOMMIT	0x00000100	/* group (of 1) commit */
 41#define	JFS_LAZYCOMMIT	0x00000200	/* lazy commit */
 42#define	JFS_TMPFS	0x00000400	/* temporary file system -
 43					 * do not log/commit:
 44					 * Never implemented
 45					 */
 46
 47/* log logical volume option */
 48#define	JFS_INLINELOG	0x00000800	/* inline log within file system */
 49#define JFS_INLINEMOVE	0x00001000	/* inline log being moved */
 50
 51/* Secondary aggregate inode table */
 52#define JFS_BAD_SAIT	0x00010000	/* current secondary ait is bad */
 53
 54/* sparse regular file support */
 55#define JFS_SPARSE	0x00020000	/* sparse regular file */
 56
 57/* DASD Limits		F226941 */
 58#define JFS_DASD_ENABLED 0x00040000	/* DASD limits enabled */
 59#define	JFS_DASD_PRIME	0x00080000	/* Prime DASD usage on boot */
 60
 61/* big endian flag */
 62#define	JFS_SWAP_BYTES	0x00100000	/* running on big endian computer */
 63
 64/* Directory index */
 65#define JFS_DIR_INDEX	0x00200000	/* Persistent index for */
 66
 67/* platform options */
 68#define JFS_LINUX	0x10000000	/* Linux support */
 69#define JFS_DFS		0x20000000	/* DCE DFS LFS support */
 70/*	Never implemented */
 71
 72#define JFS_OS2		0x40000000	/* OS/2 support */
 73/*	case-insensitive name/directory support */
 74
 75#define JFS_AIX		0x80000000	/* AIX support */
 76
 77/*
 78 *	buffer cache configuration
 79 */
 80/* page size */
 81#ifdef PSIZE
 82#undef PSIZE
 83#endif
 84#define	PSIZE		4096	/* page size (in byte) */
 85#define	L2PSIZE		12	/* log2(PSIZE) */
 86#define	POFFSET		4095	/* offset within page */
 87
 88/* buffer page size */
 89#define BPSIZE	PSIZE
 90
 91/*
 92 *	fs fundamental size
 93 *
 94 * PSIZE >= file system block size >= PBSIZE >= DISIZE
 95 */
 96#define	PBSIZE		512	/* physical block size (in byte) */
 97#define	L2PBSIZE	9	/* log2(PBSIZE) */
 98
 99#define DISIZE		512	/* on-disk inode size (in byte) */
100#define L2DISIZE	9	/* log2(DISIZE) */
101
102#define IDATASIZE	256	/* inode inline data size */
103#define	IXATTRSIZE	128	/* inode inline extended attribute size */
104
105#define XTPAGE_SIZE	4096
106#define log2_PAGESIZE	12
107
108#define IAG_SIZE	4096
109#define IAG_EXTENT_SIZE 4096
110#define	INOSPERIAG	4096	/* number of disk inodes per iag */
111#define	L2INOSPERIAG	12	/* l2 number of disk inodes per iag */
112#define INOSPEREXT	32	/* number of disk inode per extent */
113#define L2INOSPEREXT	5	/* l2 number of disk inode per extent */
114#define	IXSIZE		(DISIZE * INOSPEREXT)	/* inode extent size */
115#define	INOSPERPAGE	8	/* number of disk inodes per 4K page */
116#define	L2INOSPERPAGE	3	/* log2(INOSPERPAGE) */
117
118#define	IAGFREELIST_LWM	64
119
120#define INODE_EXTENT_SIZE	IXSIZE	/* inode extent size */
121#define NUM_INODE_PER_EXTENT	INOSPEREXT
122#define NUM_INODE_PER_IAG	INOSPERIAG
123
124#define MINBLOCKSIZE		512
125#define MAXBLOCKSIZE		4096
126#define	MAXFILESIZE		((s64)1 << 52)
127
128#define JFS_LINK_MAX		0xffffffff
129
130/* Minimum number of bytes supported for a JFS partition */
131#define MINJFS			(0x1000000)
132#define MINJFSTEXT		"16"
133
134/*
135 * file system block size -> physical block size
136 */
137#define LBOFFSET(x)	((x) & (PBSIZE - 1))
138#define LBNUMBER(x)	((x) >> L2PBSIZE)
139#define	LBLK2PBLK(sb,b)	((b) << (sb->s_blocksize_bits - L2PBSIZE))
140#define	PBLK2LBLK(sb,b)	((b) >> (sb->s_blocksize_bits - L2PBSIZE))
141/* size in byte -> last page number */
142#define	SIZE2PN(size)	( ((s64)((size) - 1)) >> (L2PSIZE) )
143/* size in byte -> last file system block number */
144#define	SIZE2BN(size, l2bsize) ( ((s64)((size) - 1)) >> (l2bsize) )
145
146/*
147 * fixed physical block address (physical block size = 512 byte)
148 *
149 * NOTE: since we can't guarantee a physical block size of 512 bytes the use of
150 *	 these macros should be removed and the byte offset macros used instead.
151 */
152#define SUPER1_B	64	/* primary superblock */
153#define	AIMAP_B		(SUPER1_B + 8)	/* 1st extent of aggregate inode map */
154#define	AITBL_B		(AIMAP_B + 16)	/*
155					 * 1st extent of aggregate inode table
156					 */
157#define	SUPER2_B	(AITBL_B + 32)	/* 2ndary superblock pbn */
158#define	BMAP_B		(SUPER2_B + 8)	/* block allocation map */
159
160/*
161 * SIZE_OF_SUPER defines the total amount of space reserved on disk for the
162 * superblock.  This is not the same as the superblock structure, since all of
163 * this space is not currently being used.
164 */
165#define SIZE_OF_SUPER	PSIZE
166
167/*
168 * SIZE_OF_AG_TABLE defines the amount of space reserved to hold the AG table
169 */
170#define SIZE_OF_AG_TABLE	PSIZE
171
172/*
173 * SIZE_OF_MAP_PAGE defines the amount of disk space reserved for each page of
174 * the inode allocation map (to hold iag)
175 */
176#define SIZE_OF_MAP_PAGE	PSIZE
177
178/*
179 * fixed byte offset address
180 */
181#define SUPER1_OFF	0x8000	/* primary superblock */
182#define AIMAP_OFF	(SUPER1_OFF + SIZE_OF_SUPER)
183					/*
184					 * Control page of aggregate inode map
185					 * followed by 1st extent of map
186					 */
187#define AITBL_OFF	(AIMAP_OFF + (SIZE_OF_MAP_PAGE << 1))
188					/*
189					 * 1st extent of aggregate inode table
190					 */
191#define SUPER2_OFF	(AITBL_OFF + INODE_EXTENT_SIZE)
192					/*
193					 * secondary superblock
194					 */
195#define BMAP_OFF	(SUPER2_OFF + SIZE_OF_SUPER)
196					/*
197					 * block allocation map
198					 */
199
200/*
201 * The following macro is used to indicate the number of reserved disk blocks at
202 * the front of an aggregate, in terms of physical blocks.  This value is
203 * currently defined to be 32K.  This turns out to be the same as the primary
204 * superblock's address, since it directly follows the reserved blocks.
205 */
206#define AGGR_RSVD_BLOCKS	SUPER1_B
207
208/*
209 * The following macro is used to indicate the number of reserved bytes at the
210 * front of an aggregate.  This value is currently defined to be 32K.  This
211 * turns out to be the same as the primary superblock's byte offset, since it
212 * directly follows the reserved blocks.
213 */
214#define AGGR_RSVD_BYTES	SUPER1_OFF
215
216/*
217 * The following macro defines the byte offset for the first inode extent in
218 * the aggregate inode table.  This allows us to find the self inode to find the
219 * rest of the table.  Currently this value is 44K.
220 */
221#define AGGR_INODE_TABLE_START	AITBL_OFF
222
223/*
224 *	fixed reserved inode number
225 */
226/* aggregate inode */
227#define AGGR_RESERVED_I	0	/* aggregate inode (reserved) */
228#define	AGGREGATE_I	1	/* aggregate inode map inode */
229#define	BMAP_I		2	/* aggregate block allocation map inode */
230#define	LOG_I		3	/* aggregate inline log inode */
231#define BADBLOCK_I	4	/* aggregate bad block inode */
232#define	FILESYSTEM_I	16	/* 1st/only fileset inode in ait:
233				 * fileset inode map inode
234				 */
235
236/* per fileset inode */
237#define FILESET_RSVD_I	0	/* fileset inode (reserved) */
238#define FILESET_EXT_I	1	/* fileset inode extension */
239#define	ROOT_I		2	/* fileset root inode */
240#define ACL_I		3	/* fileset ACL inode */
241
242#define FILESET_OBJECT_I 4	/* the first fileset inode available for a file
243				 * or directory or link...
244				 */
245#define FIRST_FILESET_INO 16	/* the first aggregate inode which describes
246				 * an inode.  (To fsck this is also the first
247				 * inode in part 2 of the agg inode table.)
248				 */
249
250/*
251 *	directory configuration
252 */
253#define JFS_NAME_MAX	255
254#define JFS_PATH_MAX	BPSIZE
255
256
257/*
258 *	file system state (superblock state)
259 */
260#define FM_CLEAN 0x00000000	/* file system is unmounted and clean */
261#define FM_MOUNT 0x00000001	/* file system is mounted cleanly */
262#define FM_DIRTY 0x00000002	/* file system was not unmounted and clean
263				 * when mounted or
264				 * commit failure occurred while being mounted:
265				 * fsck() must be run to repair
266				 */
267#define	FM_LOGREDO 0x00000004	/* log based recovery (logredo()) failed:
268				 * fsck() must be run to repair
269				 */
270#define	FM_EXTENDFS 0x00000008	/* file system extendfs() in progress */
271#define	FM_STATE_MAX 0x0000000f	/* max value of s_state */
272
273#endif				/* _H_JFS_FILSYS */