Loading...
1/*
2 * Dallas Semiconductor DS1682 Elapsed Time Recorder device driver
3 *
4 * Written by: Grant Likely <grant.likely@secretlab.ca>
5 *
6 * Copyright (C) 2007 Secret Lab Technologies Ltd.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13/*
14 * The DS1682 elapsed timer recorder is a simple device that implements
15 * one elapsed time counter, one event counter, an alarm signal and 10
16 * bytes of general purpose EEPROM.
17 *
18 * This driver provides access to the DS1682 counters and user data via
19 * the sysfs. The following attributes are added to the device node:
20 * elapsed_time (u32): Total elapsed event time in ms resolution
21 * alarm_time (u32): When elapsed time exceeds the value in alarm_time,
22 * then the alarm pin is asserted.
23 * event_count (u16): number of times the event pin has gone low.
24 * eeprom (u8[10]): general purpose EEPROM
25 *
26 * Counter registers and user data are both read/write unless the device
27 * has been write protected. This driver does not support turning off write
28 * protection. Once write protection is turned on, it is impossible to
29 * turn it off again, so I have left the feature out of this driver to avoid
30 * accidental enabling, but it is trivial to add write protect support.
31 *
32 */
33
34#include <linux/module.h>
35#include <linux/i2c.h>
36#include <linux/string.h>
37#include <linux/list.h>
38#include <linux/sysfs.h>
39#include <linux/ctype.h>
40#include <linux/hwmon-sysfs.h>
41
42/* Device registers */
43#define DS1682_REG_CONFIG 0x00
44#define DS1682_REG_ALARM 0x01
45#define DS1682_REG_ELAPSED 0x05
46#define DS1682_REG_EVT_CNTR 0x09
47#define DS1682_REG_EEPROM 0x0b
48#define DS1682_REG_RESET 0x1d
49#define DS1682_REG_WRITE_DISABLE 0x1e
50#define DS1682_REG_WRITE_MEM_DISABLE 0x1f
51
52#define DS1682_EEPROM_SIZE 10
53
54/*
55 * Generic counter attributes
56 */
57static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr,
58 char *buf)
59{
60 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
61 struct i2c_client *client = to_i2c_client(dev);
62 __le32 val = 0;
63 int rc;
64
65 dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name);
66
67 /* Read the register */
68 rc = i2c_smbus_read_i2c_block_data(client, sattr->index, sattr->nr,
69 (u8 *) & val);
70 if (rc < 0)
71 return -EIO;
72
73 /* Special case: the 32 bit regs are time values with 1/4s
74 * resolution, scale them up to milliseconds */
75 if (sattr->nr == 4)
76 return sprintf(buf, "%llu\n",
77 ((unsigned long long)le32_to_cpu(val)) * 250);
78
79 /* Format the output string and return # of bytes */
80 return sprintf(buf, "%li\n", (long)le32_to_cpu(val));
81}
82
83static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr,
84 const char *buf, size_t count)
85{
86 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
87 struct i2c_client *client = to_i2c_client(dev);
88 char *endp;
89 u64 val;
90 __le32 val_le;
91 int rc;
92
93 dev_dbg(dev, "ds1682_store() called on %s\n", attr->attr.name);
94
95 /* Decode input */
96 val = simple_strtoull(buf, &endp, 0);
97 if (buf == endp) {
98 dev_dbg(dev, "input string not a number\n");
99 return -EINVAL;
100 }
101
102 /* Special case: the 32 bit regs are time values with 1/4s
103 * resolution, scale input down to quarter-seconds */
104 if (sattr->nr == 4)
105 do_div(val, 250);
106
107 /* write out the value */
108 val_le = cpu_to_le32(val);
109 rc = i2c_smbus_write_i2c_block_data(client, sattr->index, sattr->nr,
110 (u8 *) & val_le);
111 if (rc < 0) {
112 dev_err(dev, "register write failed; reg=0x%x, size=%i\n",
113 sattr->index, sattr->nr);
114 return -EIO;
115 }
116
117 return count;
118}
119
120/*
121 * Simple register attributes
122 */
123static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show,
124 ds1682_store, 4, DS1682_REG_ELAPSED);
125static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show,
126 ds1682_store, 4, DS1682_REG_ALARM);
127static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show,
128 ds1682_store, 2, DS1682_REG_EVT_CNTR);
129
130static const struct attribute_group ds1682_group = {
131 .attrs = (struct attribute *[]) {
132 &sensor_dev_attr_elapsed_time.dev_attr.attr,
133 &sensor_dev_attr_alarm_time.dev_attr.attr,
134 &sensor_dev_attr_event_count.dev_attr.attr,
135 NULL,
136 },
137};
138
139/*
140 * User data attribute
141 */
142static ssize_t ds1682_eeprom_read(struct file *filp, struct kobject *kobj,
143 struct bin_attribute *attr,
144 char *buf, loff_t off, size_t count)
145{
146 struct i2c_client *client = kobj_to_i2c_client(kobj);
147 int rc;
148
149 dev_dbg(&client->dev, "ds1682_eeprom_read(p=%p, off=%lli, c=%zi)\n",
150 buf, off, count);
151
152 if (off >= DS1682_EEPROM_SIZE)
153 return 0;
154
155 if (off + count > DS1682_EEPROM_SIZE)
156 count = DS1682_EEPROM_SIZE - off;
157
158 rc = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + off,
159 count, buf);
160 if (rc < 0)
161 return -EIO;
162
163 return count;
164}
165
166static ssize_t ds1682_eeprom_write(struct file *filp, struct kobject *kobj,
167 struct bin_attribute *attr,
168 char *buf, loff_t off, size_t count)
169{
170 struct i2c_client *client = kobj_to_i2c_client(kobj);
171
172 dev_dbg(&client->dev, "ds1682_eeprom_write(p=%p, off=%lli, c=%zi)\n",
173 buf, off, count);
174
175 if (off >= DS1682_EEPROM_SIZE)
176 return -ENOSPC;
177
178 if (off + count > DS1682_EEPROM_SIZE)
179 count = DS1682_EEPROM_SIZE - off;
180
181 /* Write out to the device */
182 if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off,
183 count, buf) < 0)
184 return -EIO;
185
186 return count;
187}
188
189static struct bin_attribute ds1682_eeprom_attr = {
190 .attr = {
191 .name = "eeprom",
192 .mode = S_IRUGO | S_IWUSR,
193 },
194 .size = DS1682_EEPROM_SIZE,
195 .read = ds1682_eeprom_read,
196 .write = ds1682_eeprom_write,
197};
198
199/*
200 * Called when a ds1682 device is matched with this driver
201 */
202static int ds1682_probe(struct i2c_client *client,
203 const struct i2c_device_id *id)
204{
205 int rc;
206
207 if (!i2c_check_functionality(client->adapter,
208 I2C_FUNC_SMBUS_I2C_BLOCK)) {
209 dev_err(&client->dev, "i2c bus does not support the ds1682\n");
210 rc = -ENODEV;
211 goto exit;
212 }
213
214 rc = sysfs_create_group(&client->dev.kobj, &ds1682_group);
215 if (rc)
216 goto exit;
217
218 rc = sysfs_create_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
219 if (rc)
220 goto exit_bin_attr;
221
222 return 0;
223
224 exit_bin_attr:
225 sysfs_remove_group(&client->dev.kobj, &ds1682_group);
226 exit:
227 return rc;
228}
229
230static int ds1682_remove(struct i2c_client *client)
231{
232 sysfs_remove_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
233 sysfs_remove_group(&client->dev.kobj, &ds1682_group);
234 return 0;
235}
236
237static const struct i2c_device_id ds1682_id[] = {
238 { "ds1682", 0 },
239 { }
240};
241MODULE_DEVICE_TABLE(i2c, ds1682_id);
242
243static struct i2c_driver ds1682_driver = {
244 .driver = {
245 .name = "ds1682",
246 },
247 .probe = ds1682_probe,
248 .remove = ds1682_remove,
249 .id_table = ds1682_id,
250};
251
252module_i2c_driver(ds1682_driver);
253
254MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
255MODULE_DESCRIPTION("DS1682 Elapsed Time Indicator driver");
256MODULE_LICENSE("GPL");
1/*
2 * Dallas Semiconductor DS1682 Elapsed Time Recorder device driver
3 *
4 * Written by: Grant Likely <grant.likely@secretlab.ca>
5 *
6 * Copyright (C) 2007 Secret Lab Technologies Ltd.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13/*
14 * The DS1682 elapsed timer recorder is a simple device that implements
15 * one elapsed time counter, one event counter, an alarm signal and 10
16 * bytes of general purpose EEPROM.
17 *
18 * This driver provides access to the DS1682 counters and user data via
19 * the sysfs. The following attributes are added to the device node:
20 * elapsed_time (u32): Total elapsed event time in ms resolution
21 * alarm_time (u32): When elapsed time exceeds the value in alarm_time,
22 * then the alarm pin is asserted.
23 * event_count (u16): number of times the event pin has gone low.
24 * eeprom (u8[10]): general purpose EEPROM
25 *
26 * Counter registers and user data are both read/write unless the device
27 * has been write protected. This driver does not support turning off write
28 * protection. Once write protection is turned on, it is impossible to
29 * turn it off again, so I have left the feature out of this driver to avoid
30 * accidental enabling, but it is trivial to add write protect support.
31 *
32 */
33
34#include <linux/module.h>
35#include <linux/i2c.h>
36#include <linux/string.h>
37#include <linux/list.h>
38#include <linux/sysfs.h>
39#include <linux/ctype.h>
40#include <linux/hwmon-sysfs.h>
41
42/* Device registers */
43#define DS1682_REG_CONFIG 0x00
44#define DS1682_REG_ALARM 0x01
45#define DS1682_REG_ELAPSED 0x05
46#define DS1682_REG_EVT_CNTR 0x09
47#define DS1682_REG_EEPROM 0x0b
48#define DS1682_REG_RESET 0x1d
49#define DS1682_REG_WRITE_DISABLE 0x1e
50#define DS1682_REG_WRITE_MEM_DISABLE 0x1f
51
52#define DS1682_EEPROM_SIZE 10
53
54/*
55 * Generic counter attributes
56 */
57static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr,
58 char *buf)
59{
60 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
61 struct i2c_client *client = to_i2c_client(dev);
62 __le32 val = 0;
63 int rc;
64
65 dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name);
66
67 /* Read the register */
68 rc = i2c_smbus_read_i2c_block_data(client, sattr->index, sattr->nr,
69 (u8 *) & val);
70 if (rc < 0)
71 return -EIO;
72
73 /* Special case: the 32 bit regs are time values with 1/4s
74 * resolution, scale them up to milliseconds */
75 if (sattr->nr == 4)
76 return sprintf(buf, "%llu\n",
77 ((unsigned long long)le32_to_cpu(val)) * 250);
78
79 /* Format the output string and return # of bytes */
80 return sprintf(buf, "%li\n", (long)le32_to_cpu(val));
81}
82
83static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr,
84 const char *buf, size_t count)
85{
86 struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
87 struct i2c_client *client = to_i2c_client(dev);
88 u64 val;
89 __le32 val_le;
90 int rc;
91
92 dev_dbg(dev, "ds1682_store() called on %s\n", attr->attr.name);
93
94 /* Decode input */
95 rc = kstrtoull(buf, 0, &val);
96 if (rc < 0) {
97 dev_dbg(dev, "input string not a number\n");
98 return -EINVAL;
99 }
100
101 /* Special case: the 32 bit regs are time values with 1/4s
102 * resolution, scale input down to quarter-seconds */
103 if (sattr->nr == 4)
104 do_div(val, 250);
105
106 /* write out the value */
107 val_le = cpu_to_le32(val);
108 rc = i2c_smbus_write_i2c_block_data(client, sattr->index, sattr->nr,
109 (u8 *) & val_le);
110 if (rc < 0) {
111 dev_err(dev, "register write failed; reg=0x%x, size=%i\n",
112 sattr->index, sattr->nr);
113 return -EIO;
114 }
115
116 return count;
117}
118
119/*
120 * Simple register attributes
121 */
122static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show,
123 ds1682_store, 4, DS1682_REG_ELAPSED);
124static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show,
125 ds1682_store, 4, DS1682_REG_ALARM);
126static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show,
127 ds1682_store, 2, DS1682_REG_EVT_CNTR);
128
129static const struct attribute_group ds1682_group = {
130 .attrs = (struct attribute *[]) {
131 &sensor_dev_attr_elapsed_time.dev_attr.attr,
132 &sensor_dev_attr_alarm_time.dev_attr.attr,
133 &sensor_dev_attr_event_count.dev_attr.attr,
134 NULL,
135 },
136};
137
138/*
139 * User data attribute
140 */
141static ssize_t ds1682_eeprom_read(struct file *filp, struct kobject *kobj,
142 struct bin_attribute *attr,
143 char *buf, loff_t off, size_t count)
144{
145 struct i2c_client *client = kobj_to_i2c_client(kobj);
146 int rc;
147
148 dev_dbg(&client->dev, "ds1682_eeprom_read(p=%p, off=%lli, c=%zi)\n",
149 buf, off, count);
150
151 rc = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + off,
152 count, buf);
153 if (rc < 0)
154 return -EIO;
155
156 return count;
157}
158
159static ssize_t ds1682_eeprom_write(struct file *filp, struct kobject *kobj,
160 struct bin_attribute *attr,
161 char *buf, loff_t off, size_t count)
162{
163 struct i2c_client *client = kobj_to_i2c_client(kobj);
164
165 dev_dbg(&client->dev, "ds1682_eeprom_write(p=%p, off=%lli, c=%zi)\n",
166 buf, off, count);
167
168 /* Write out to the device */
169 if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off,
170 count, buf) < 0)
171 return -EIO;
172
173 return count;
174}
175
176static struct bin_attribute ds1682_eeprom_attr = {
177 .attr = {
178 .name = "eeprom",
179 .mode = S_IRUGO | S_IWUSR,
180 },
181 .size = DS1682_EEPROM_SIZE,
182 .read = ds1682_eeprom_read,
183 .write = ds1682_eeprom_write,
184};
185
186/*
187 * Called when a ds1682 device is matched with this driver
188 */
189static int ds1682_probe(struct i2c_client *client,
190 const struct i2c_device_id *id)
191{
192 int rc;
193
194 if (!i2c_check_functionality(client->adapter,
195 I2C_FUNC_SMBUS_I2C_BLOCK)) {
196 dev_err(&client->dev, "i2c bus does not support the ds1682\n");
197 rc = -ENODEV;
198 goto exit;
199 }
200
201 rc = sysfs_create_group(&client->dev.kobj, &ds1682_group);
202 if (rc)
203 goto exit;
204
205 rc = sysfs_create_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
206 if (rc)
207 goto exit_bin_attr;
208
209 return 0;
210
211 exit_bin_attr:
212 sysfs_remove_group(&client->dev.kobj, &ds1682_group);
213 exit:
214 return rc;
215}
216
217static int ds1682_remove(struct i2c_client *client)
218{
219 sysfs_remove_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
220 sysfs_remove_group(&client->dev.kobj, &ds1682_group);
221 return 0;
222}
223
224static const struct i2c_device_id ds1682_id[] = {
225 { "ds1682", 0 },
226 { }
227};
228MODULE_DEVICE_TABLE(i2c, ds1682_id);
229
230static struct i2c_driver ds1682_driver = {
231 .driver = {
232 .name = "ds1682",
233 },
234 .probe = ds1682_probe,
235 .remove = ds1682_remove,
236 .id_table = ds1682_id,
237};
238
239module_i2c_driver(ds1682_driver);
240
241MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
242MODULE_DESCRIPTION("DS1682 Elapsed Time Indicator driver");
243MODULE_LICENSE("GPL");