Linux Audio

Check our new training course

Loading...
v3.15
  1/*
  2 * net/tipc/bearer.h: Include file for TIPC bearer code
  3 *
  4 * Copyright (c) 1996-2006, 2013, Ericsson AB
  5 * Copyright (c) 2005, 2010-2011, Wind River Systems
  6 * All rights reserved.
  7 *
  8 * Redistribution and use in source and binary forms, with or without
  9 * modification, are permitted provided that the following conditions are met:
 10 *
 11 * 1. Redistributions of source code must retain the above copyright
 12 *    notice, this list of conditions and the following disclaimer.
 13 * 2. Redistributions in binary form must reproduce the above copyright
 14 *    notice, this list of conditions and the following disclaimer in the
 15 *    documentation and/or other materials provided with the distribution.
 16 * 3. Neither the names of the copyright holders nor the names of its
 17 *    contributors may be used to endorse or promote products derived from
 18 *    this software without specific prior written permission.
 19 *
 20 * Alternatively, this software may be distributed under the terms of the
 21 * GNU General Public License ("GPL") version 2 as published by the Free
 22 * Software Foundation.
 23 *
 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 34 * POSSIBILITY OF SUCH DAMAGE.
 35 */
 36
 37#ifndef _TIPC_BEARER_H
 38#define _TIPC_BEARER_H
 39
 40#include "bcast.h"
 41
 42#define MAX_BEARERS	2
 43#define MAX_MEDIA	2
 44
 45/*
 46 * Identifiers associated with TIPC message header media address info
 47 *
 48 * - address info field is 20 bytes long
 49 * - media type identifier located at offset 3
 50 * - remaining bytes vary according to media type
 
 51 */
 52#define TIPC_MEDIA_ADDR_SIZE	20
 53#define TIPC_MEDIA_TYPE_OFFSET	3
 
 54
 55/*
 56 * Identifiers of supported TIPC media types
 57 */
 58#define TIPC_MEDIA_TYPE_ETH	1
 59#define TIPC_MEDIA_TYPE_IB	2
 
 
 
 
 
 
 
 
 
 
 
 60
 61/**
 62 * struct tipc_media_addr - destination address used by TIPC bearers
 63 * @value: address info (format defined by media)
 64 * @media_id: TIPC media type identifier
 65 * @broadcast: non-zero if address is a broadcast address
 66 */
 67struct tipc_media_addr {
 68	u8 value[TIPC_MEDIA_ADDR_SIZE];
 69	u8 media_id;
 70	u8 broadcast;
 71};
 72
 73struct tipc_bearer;
 74
 75/**
 76 * struct tipc_media - Media specific info exposed to generic bearer layer
 77 * @send_msg: routine which handles buffer transmission
 78 * @enable_media: routine which enables a media
 79 * @disable_media: routine which disables a media
 80 * @addr2str: routine which converts media address to string
 81 * @addr2msg: routine which converts media address to protocol message area
 82 * @msg2addr: routine which converts media address from protocol message area
 
 83 * @priority: default link (and bearer) priority
 84 * @tolerance: default time (in ms) before declaring link failure
 85 * @window: default window (in packets) before declaring link congestion
 86 * @type_id: TIPC media identifier
 87 * @hwaddr_len: TIPC media address len
 88 * @name: media name
 89 */
 90struct tipc_media {
 91	int (*send_msg)(struct sk_buff *buf,
 92			struct tipc_bearer *b_ptr,
 93			struct tipc_media_addr *dest);
 94	int (*enable_media)(struct tipc_bearer *b_ptr);
 95	void (*disable_media)(struct tipc_bearer *b_ptr);
 96	int (*addr2str)(struct tipc_media_addr *a, char *str_buf, int str_size);
 97	int (*addr2msg)(struct tipc_media_addr *a, char *msg_area);
 98	int (*msg2addr)(const struct tipc_bearer *b_ptr,
 99			struct tipc_media_addr *a, char *msg_area);
 
 
 
 
 
 
 
100	u32 priority;
101	u32 tolerance;
102	u32 window;
103	u32 type_id;
104	u32 hwaddr_len;
105	char name[TIPC_MAX_MEDIA_NAME];
106};
107
108/**
109 * struct tipc_bearer - Generic TIPC bearer structure
110 * @media_ptr: pointer to additional media-specific information about bearer
111 * @mtu: max packet size bearer can support
112 * @addr: media-specific address associated with bearer
113 * @name: bearer name (format = media:interface)
114 * @media: ptr to media structure associated with bearer
115 * @bcast_addr: media address used in broadcasting
 
116 * @priority: default link priority for bearer
117 * @window: default window size for bearer
118 * @tolerance: default link tolerance for bearer
119 * @domain: network domain to which links can be established
120 * @identity: array index of this bearer within TIPC bearer array
121 * @link_req: ptr to (optional) structure making periodic link setup requests
122 * @net_plane: network plane ('A' through 'H') currently associated with bearer
123 * @nodes: indicates which nodes in cluster can be reached through bearer
124 *
125 * Note: media-specific code is responsible for initialization of the fields
126 * indicated below when a bearer is enabled; TIPC's generic bearer code takes
127 * care of initializing all other fields.
128 */
129struct tipc_bearer {
130	void *media_ptr;			/* initalized by media */
131	u32 mtu;				/* initalized by media */
132	struct tipc_media_addr addr;		/* initalized by media */
133	char name[TIPC_MAX_BEARER_NAME];
134	struct tipc_media *media;
135	struct tipc_media_addr bcast_addr;
 
136	u32 priority;
137	u32 window;
138	u32 tolerance;
139	u32 domain;
140	u32 identity;
141	struct tipc_link_req *link_req;
142	char net_plane;
 
143	struct tipc_node_map nodes;
144};
145
146struct tipc_bearer_names {
147	char media_name[TIPC_MAX_MEDIA_NAME];
148	char if_name[TIPC_MAX_IF_NAME];
149};
150
151struct tipc_link;
152
153extern struct tipc_bearer *bearer_list[];
154
155/*
156 * TIPC routines available to supported media types
157 */
158
159void tipc_rcv(struct sk_buff *buf, struct tipc_bearer *tb_ptr);
160int tipc_enable_bearer(const char *bearer_name, u32 disc_domain, u32 priority);
161int tipc_disable_bearer(const char *name);
162
163/*
164 * Routines made available to TIPC by supported media types
165 */
166extern struct tipc_media eth_media_info;
167
168#ifdef CONFIG_TIPC_MEDIA_IB
169extern struct tipc_media ib_media_info;
170#endif
 
 
 
 
 
 
 
 
 
 
 
 
 
171
172int tipc_media_set_priority(const char *name, u32 new_value);
173int tipc_media_set_window(const char *name, u32 new_value);
174void tipc_media_addr_printf(char *buf, int len, struct tipc_media_addr *a);
175struct sk_buff *tipc_media_get_names(void);
176void tipc_l2_media_addr_set(const struct tipc_bearer *b,
177			    struct tipc_media_addr *a, char *mac);
178int tipc_enable_l2_media(struct tipc_bearer *b);
179void tipc_disable_l2_media(struct tipc_bearer *b);
180int tipc_l2_send_msg(struct sk_buff *buf, struct tipc_bearer *b,
181		     struct tipc_media_addr *dest);
182
183struct sk_buff *tipc_bearer_get_names(void);
184void tipc_bearer_add_dest(struct tipc_bearer *b_ptr, u32 dest);
185void tipc_bearer_remove_dest(struct tipc_bearer *b_ptr, u32 dest);
186struct tipc_bearer *tipc_bearer_find(const char *name);
187struct tipc_media *tipc_media_find(const char *name);
188int tipc_bearer_setup(void);
189void tipc_bearer_cleanup(void);
190void tipc_bearer_stop(void);
191void tipc_bearer_send(struct tipc_bearer *b, struct sk_buff *buf,
192		      struct tipc_media_addr *dest);
 
 
 
 
 
 
 
193
194#endif	/* _TIPC_BEARER_H */
v4.6
  1/*
  2 * net/tipc/bearer.h: Include file for TIPC bearer code
  3 *
  4 * Copyright (c) 1996-2006, 2013-2014, Ericsson AB
  5 * Copyright (c) 2005, 2010-2011, Wind River Systems
  6 * All rights reserved.
  7 *
  8 * Redistribution and use in source and binary forms, with or without
  9 * modification, are permitted provided that the following conditions are met:
 10 *
 11 * 1. Redistributions of source code must retain the above copyright
 12 *    notice, this list of conditions and the following disclaimer.
 13 * 2. Redistributions in binary form must reproduce the above copyright
 14 *    notice, this list of conditions and the following disclaimer in the
 15 *    documentation and/or other materials provided with the distribution.
 16 * 3. Neither the names of the copyright holders nor the names of its
 17 *    contributors may be used to endorse or promote products derived from
 18 *    this software without specific prior written permission.
 19 *
 20 * Alternatively, this software may be distributed under the terms of the
 21 * GNU General Public License ("GPL") version 2 as published by the Free
 22 * Software Foundation.
 23 *
 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 34 * POSSIBILITY OF SUCH DAMAGE.
 35 */
 36
 37#ifndef _TIPC_BEARER_H
 38#define _TIPC_BEARER_H
 39
 40#include "netlink.h"
 41#include "core.h"
 42#include <net/genetlink.h>
 43
 44#define MAX_MEDIA	3
 45#define MAX_NODES	4096
 46#define WSIZE		32
 47
 48/* Identifiers associated with TIPC message header media address info
 49 * - address info field is 32 bytes long
 50 * - the field's actual content and length is defined per media
 51 * - remaining unused bytes in the field are set to zero
 52 */
 53#define TIPC_MEDIA_INFO_SIZE	32
 54#define TIPC_MEDIA_TYPE_OFFSET	3
 55#define TIPC_MEDIA_ADDR_OFFSET	4
 56
 57/*
 58 * Identifiers of supported TIPC media types
 59 */
 60#define TIPC_MEDIA_TYPE_ETH	1
 61#define TIPC_MEDIA_TYPE_IB	2
 62#define TIPC_MEDIA_TYPE_UDP	3
 63
 64/**
 65 * struct tipc_node_map - set of node identifiers
 66 * @count: # of nodes in set
 67 * @map: bitmap of node identifiers that are in the set
 68 */
 69struct tipc_node_map {
 70	u32 count;
 71	u32 map[MAX_NODES / WSIZE];
 72};
 73
 74/**
 75 * struct tipc_media_addr - destination address used by TIPC bearers
 76 * @value: address info (format defined by media)
 77 * @media_id: TIPC media type identifier
 78 * @broadcast: non-zero if address is a broadcast address
 79 */
 80struct tipc_media_addr {
 81	u8 value[TIPC_MEDIA_INFO_SIZE];
 82	u8 media_id;
 83	u8 broadcast;
 84};
 85
 86struct tipc_bearer;
 87
 88/**
 89 * struct tipc_media - Media specific info exposed to generic bearer layer
 90 * @send_msg: routine which handles buffer transmission
 91 * @enable_media: routine which enables a media
 92 * @disable_media: routine which disables a media
 93 * @addr2str: convert media address format to string
 94 * @addr2msg: convert from media addr format to discovery msg addr format
 95 * @msg2addr: convert from discovery msg addr format to media addr format
 96 * @raw2addr: convert from raw addr format to media addr format
 97 * @priority: default link (and bearer) priority
 98 * @tolerance: default time (in ms) before declaring link failure
 99 * @window: default window (in packets) before declaring link congestion
100 * @type_id: TIPC media identifier
101 * @hwaddr_len: TIPC media address len
102 * @name: media name
103 */
104struct tipc_media {
105	int (*send_msg)(struct net *net, struct sk_buff *buf,
106			struct tipc_bearer *b,
107			struct tipc_media_addr *dest);
108	int (*enable_media)(struct net *net, struct tipc_bearer *b,
109			    struct nlattr *attr[]);
110	void (*disable_media)(struct tipc_bearer *b);
111	int (*addr2str)(struct tipc_media_addr *addr,
112			char *strbuf,
113			int bufsz);
114	int (*addr2msg)(char *msg, struct tipc_media_addr *addr);
115	int (*msg2addr)(struct tipc_bearer *b,
116			struct tipc_media_addr *addr,
117			char *msg);
118	int (*raw2addr)(struct tipc_bearer *b,
119			struct tipc_media_addr *addr,
120			char *raw);
121	u32 priority;
122	u32 tolerance;
123	u32 window;
124	u32 type_id;
125	u32 hwaddr_len;
126	char name[TIPC_MAX_MEDIA_NAME];
127};
128
129/**
130 * struct tipc_bearer - Generic TIPC bearer structure
131 * @media_ptr: pointer to additional media-specific information about bearer
132 * @mtu: max packet size bearer can support
133 * @addr: media-specific address associated with bearer
134 * @name: bearer name (format = media:interface)
135 * @media: ptr to media structure associated with bearer
136 * @bcast_addr: media address used in broadcasting
137 * @rcu: rcu struct for tipc_bearer
138 * @priority: default link priority for bearer
139 * @window: default window size for bearer
140 * @tolerance: default link tolerance for bearer
141 * @domain: network domain to which links can be established
142 * @identity: array index of this bearer within TIPC bearer array
143 * @link_req: ptr to (optional) structure making periodic link setup requests
144 * @net_plane: network plane ('A' through 'H') currently associated with bearer
145 * @nodes: indicates which nodes in cluster can be reached through bearer
146 *
147 * Note: media-specific code is responsible for initialization of the fields
148 * indicated below when a bearer is enabled; TIPC's generic bearer code takes
149 * care of initializing all other fields.
150 */
151struct tipc_bearer {
152	void __rcu *media_ptr;			/* initalized by media */
153	u32 mtu;				/* initalized by media */
154	struct tipc_media_addr addr;		/* initalized by media */
155	char name[TIPC_MAX_BEARER_NAME];
156	struct tipc_media *media;
157	struct tipc_media_addr bcast_addr;
158	struct rcu_head rcu;
159	u32 priority;
160	u32 window;
161	u32 tolerance;
162	u32 domain;
163	u32 identity;
164	struct tipc_link_req *link_req;
165	char net_plane;
166	int node_cnt;
167	struct tipc_node_map nodes;
168};
169
170struct tipc_bearer_names {
171	char media_name[TIPC_MAX_MEDIA_NAME];
172	char if_name[TIPC_MAX_IF_NAME];
173};
174
 
 
 
 
175/*
176 * TIPC routines available to supported media types
177 */
178
179void tipc_rcv(struct net *net, struct sk_buff *skb, struct tipc_bearer *b);
 
 
180
181/*
182 * Routines made available to TIPC by supported media types
183 */
184extern struct tipc_media eth_media_info;
185
186#ifdef CONFIG_TIPC_MEDIA_IB
187extern struct tipc_media ib_media_info;
188#endif
189#ifdef CONFIG_TIPC_MEDIA_UDP
190extern struct tipc_media udp_media_info;
191#endif
192
193int tipc_nl_bearer_disable(struct sk_buff *skb, struct genl_info *info);
194int tipc_nl_bearer_enable(struct sk_buff *skb, struct genl_info *info);
195int tipc_nl_bearer_dump(struct sk_buff *skb, struct netlink_callback *cb);
196int tipc_nl_bearer_get(struct sk_buff *skb, struct genl_info *info);
197int tipc_nl_bearer_set(struct sk_buff *skb, struct genl_info *info);
198
199int tipc_nl_media_dump(struct sk_buff *skb, struct netlink_callback *cb);
200int tipc_nl_media_get(struct sk_buff *skb, struct genl_info *info);
201int tipc_nl_media_set(struct sk_buff *skb, struct genl_info *info);
202
203int tipc_media_set_priority(const char *name, u32 new_value);
204int tipc_media_set_window(const char *name, u32 new_value);
205void tipc_media_addr_printf(char *buf, int len, struct tipc_media_addr *a);
206int tipc_enable_l2_media(struct net *net, struct tipc_bearer *b,
207			 struct nlattr *attrs[]);
 
 
208void tipc_disable_l2_media(struct tipc_bearer *b);
209int tipc_l2_send_msg(struct net *net, struct sk_buff *buf,
210		     struct tipc_bearer *b, struct tipc_media_addr *dest);
211
212void tipc_bearer_add_dest(struct net *net, u32 bearer_id, u32 dest);
213void tipc_bearer_remove_dest(struct net *net, u32 bearer_id, u32 dest);
214struct tipc_bearer *tipc_bearer_find(struct net *net, const char *name);
 
215struct tipc_media *tipc_media_find(const char *name);
216int tipc_bearer_setup(void);
217void tipc_bearer_cleanup(void);
218void tipc_bearer_stop(struct net *net);
219int tipc_bearer_mtu(struct net *net, u32 bearer_id);
220void tipc_bearer_xmit_skb(struct net *net, u32 bearer_id,
221			  struct sk_buff *skb,
222			  struct tipc_media_addr *dest);
223void tipc_bearer_xmit(struct net *net, u32 bearer_id,
224		      struct sk_buff_head *xmitq,
225		      struct tipc_media_addr *dst);
226void tipc_bearer_bc_xmit(struct net *net, u32 bearer_id,
227			 struct sk_buff_head *xmitq);
228
229#endif	/* _TIPC_BEARER_H */